diff options
Diffstat (limited to 'drivers/misc/rsa/rsa.h')
| -rwxr-xr-x | drivers/misc/rsa/rsa.h | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/drivers/misc/rsa/rsa.h b/drivers/misc/rsa/rsa.h new file mode 100755 index 00000000..41691ae1 --- /dev/null +++ b/drivers/misc/rsa/rsa.h @@ -0,0 +1,373 @@ +/** + * \file rsa.h + * + * \brief The RSA public-key cryptosystem + * + * Copyright (C) 2006-2010, Brainspark B.V. + * + * This file is part of PolarSSL (http://www.polarssl.org) + * Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org> + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef POLARSSL_RSA_H +#define POLARSSL_RSA_H + +#include "bignum.h" +#include <stddef.h> +/* + * RSA Error codes + */ +#define POLARSSL_ERR_RSA_BAD_INPUT_DATA -0x4080 /**< Bad input parameters to function. */ +#define POLARSSL_ERR_RSA_INVALID_PADDING -0x4100 /**< Input data contains invalid padding and is rejected. */ +#define POLARSSL_ERR_RSA_KEY_GEN_FAILED -0x4180 /**< Something failed during generation of a key. */ +#define POLARSSL_ERR_RSA_KEY_CHECK_FAILED -0x4200 /**< Key failed to pass the libraries validity check. */ +#define POLARSSL_ERR_RSA_PUBLIC_FAILED -0x4280 /**< The public key operation failed. */ +#define POLARSSL_ERR_RSA_PRIVATE_FAILED -0x4300 /**< The private key operation failed. */ +#define POLARSSL_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */ +#define POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */ +#define POLARSSL_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */ + +/* + * PKCS#1 constants + */ +#define SIG_RSA_RAW 0 +#define SIG_RSA_MD2 2 +#define SIG_RSA_MD4 3 +#define SIG_RSA_MD5 4 +#define SIG_RSA_SHA1 5 +#define SIG_RSA_SHA224 14 +#define SIG_RSA_SHA256 11 +#define SIG_RSA_SHA384 12 +#define SIG_RSA_SHA512 13 + +#define RSA_PUBLIC 0 +#define RSA_PRIVATE 1 + +#define RSA_PKCS_V15 0 +#define RSA_PKCS_V21 1 + +#define RSA_SIGN 1 +#define RSA_CRYPT 2 + +#define ASN1_STR_CONSTRUCTED_SEQUENCE "\x30" +#define ASN1_STR_NULL "\x05" +#define ASN1_STR_OID "\x06" +#define ASN1_STR_OCTET_STRING "\x04" + +#define OID_DIGEST_ALG_MDX "\x2A\x86\x48\x86\xF7\x0D\x02\x00" +#define OID_HASH_ALG_SHA1 "\x2b\x0e\x03\x02\x1a" +#define OID_HASH_ALG_SHA2X "\x60\x86\x48\x01\x65\x03\x04\x02\x00" + +#define OID_ISO_MEMBER_BODIES "\x2a" +#define OID_ISO_IDENTIFIED_ORG "\x2b" + +/* + * ISO Member bodies OID parts + */ +#define OID_COUNTRY_US "\x86\x48" +#define OID_RSA_DATA_SECURITY "\x86\xf7\x0d" + +/* + * ISO Identified organization OID parts + */ +#define OID_OIW_SECSIG_SHA1 "\x0e\x03\x02\x1a" + +/* + * DigestInfo ::= SEQUENCE { + * digestAlgorithm DigestAlgorithmIdentifier, + * digest Digest } + * + * DigestAlgorithmIdentifier ::= AlgorithmIdentifier + * + * Digest ::= OCTET STRING + */ +#define ASN1_HASH_MDX \ +( \ + ASN1_STR_CONSTRUCTED_SEQUENCE "\x20" \ + ASN1_STR_CONSTRUCTED_SEQUENCE "\x0C" \ + ASN1_STR_OID "\x08" \ + OID_DIGEST_ALG_MDX \ + ASN1_STR_NULL "\x00" \ + ASN1_STR_OCTET_STRING "\x10" \ +) + +#define ASN1_HASH_SHA1 \ + ASN1_STR_CONSTRUCTED_SEQUENCE "\x21" \ + ASN1_STR_CONSTRUCTED_SEQUENCE "\x09" \ + ASN1_STR_OID "\x05" \ + OID_HASH_ALG_SHA1 \ + ASN1_STR_NULL "\x00" \ + ASN1_STR_OCTET_STRING "\x14" + +#define ASN1_HASH_SHA2X \ + ASN1_STR_CONSTRUCTED_SEQUENCE "\x11" \ + ASN1_STR_CONSTRUCTED_SEQUENCE "\x0d" \ + ASN1_STR_OID "\x09" \ + OID_HASH_ALG_SHA2X \ + ASN1_STR_NULL "\x00" \ + ASN1_STR_OCTET_STRING "\x00" + + +/** + * \brief RSA context structure + */ +typedef struct +{ + int ver; /*!< always 0 */ + size_t len; /*!< size(N) in chars */ + + mpi N; /*!< public modulus */ + mpi E; /*!< public exponent */ + + mpi D; /*!< private exponent */ + mpi P; /*!< 1st prime factor */ + mpi Q; /*!< 2nd prime factor */ + mpi DP; /*!< D % (P - 1) */ + mpi DQ; /*!< D % (Q - 1) */ + mpi QP; /*!< 1 / (Q % P) */ + + mpi RN; /*!< cached R^2 mod N */ + mpi RP; /*!< cached R^2 mod P */ + mpi RQ; /*!< cached R^2 mod Q */ + + int padding; /*!< RSA_PKCS_V15 for 1.5 padding and + RSA_PKCS_v21 for OAEP/PSS */ + int hash_id; /*!< Hash identifier of md_type_t as + specified in the md.h header file + for the EME-OAEP and EMSA-PSS + encoding */ +} +rsa_context; + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Initialize an RSA context + * + * \param ctx RSA context to be initialized + * \param padding RSA_PKCS_V15 or RSA_PKCS_V21 + * \param hash_id RSA_PKCS_V21 hash identifier + * + * \note The hash_id parameter is actually ignored + * when using RSA_PKCS_V15 padding. + */ +void rsa_init( rsa_context *ctx, + int padding, + int hash_id); + +/** + * \brief Generate an RSA keypair + * + * \param ctx RSA context that will hold the key + * \param f_rng RNG function + * \param p_rng RNG parameter + * \param nbits size of the public key in bits + * \param exponent public exponent (e.g., 65537) + * + * \note rsa_init() must be called beforehand to setup + * the RSA context. + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + */ +int rsa_gen_key( rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + unsigned int nbits, int exponent ); + +/** + * \brief Check a public RSA key + * + * \param ctx RSA context to be checked + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + */ +int rsa_check_pubkey( const rsa_context *ctx ); + +/** + * \brief Check a private RSA key + * + * \param ctx RSA context to be checked + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + */ +int rsa_check_privkey( const rsa_context *ctx ); + +/** + * \brief Do an RSA public key operation + * + * \param ctx RSA context + * \param input input buffer + * \param output output buffer + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note This function does NOT take care of message + * padding. Also, be sure to set input[0] = 0 or assure that + * input is smaller than N. + * + * \note The input and output buffers must be large + * enough (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_public( rsa_context *ctx, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Do an RSA private key operation + * + * \param ctx RSA context + * \param input input buffer + * \param output output buffer + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note The input and output buffers must be large + * enough (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_private( rsa_context *ctx, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Add the message padding, then do an RSA operation + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding) + * \param p_rng RNG parameter + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param ilen contains the plaintext length + * \param input buffer holding the data to be encrypted + * \param output buffer that will hold the ciphertext + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + */ +int rsa_pkcs1_encrypt( rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, size_t ilen, + const unsigned char *input, + unsigned char *output ); + +/** + * \brief Do an RSA operation, then remove the message padding + * + * \param ctx RSA context + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param olen will contain the plaintext length + * \param input buffer holding the encrypted data + * \param output buffer that will hold the plaintext + * \param output_max_len maximum length of the output buffer + * + * \return 0 if successful, or an POLARSSL_ERR_RSA_XXX error code + * + * \note The output buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise + * an error is thrown. + */ +int rsa_pkcs1_decrypt( rsa_context *ctx, + int mode, size_t *olen, + const unsigned char *input, + unsigned char *output, + size_t output_max_len ); + +/** + * \brief Do a private RSA to sign a message digest + * + * \param ctx RSA context + * \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding) + * \param p_rng RNG parameter + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param hash_id SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512} + * \param hashlen message digest length (for SIG_RSA_RAW only) + * \param hash buffer holding the message digest + * \param sig buffer that will hold the ciphertext + * + * \return 0 if the signing operation was successful, + * or an POLARSSL_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note In case of PKCS#1 v2.1 encoding keep in mind that + * the hash_id in the RSA context is the one used for the + * encoding. hash_id in the function call is the type of hash + * that is encoded. According to RFC 3447 it is advised to + * keep both hashes the same. + */ +int rsa_pkcs1_sign( rsa_context *ctx, + int (*f_rng)(void *, unsigned char *, size_t), + void *p_rng, + int mode, + int hash_id, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Do a public RSA and check the message digest + * + * \param ctx points to an RSA public key + * \param mode RSA_PUBLIC or RSA_PRIVATE + * \param hash_id SIG_RSA_RAW, SIG_RSA_MD{2,4,5} or SIG_RSA_SHA{1,224,256,384,512} + * \param hashlen message digest length (for SIG_RSA_RAW only) + * \param hash buffer holding the message digest + * \param sig buffer holding the ciphertext + * + * \return 0 if the verify operation was successful, + * or an POLARSSL_ERR_RSA_XXX error code + * + * \note The "sig" buffer must be as large as the size + * of ctx->N (eg. 128 bytes if RSA-1024 is used). + * + * \note In case of PKCS#1 v2.1 encoding keep in mind that + * the hash_id in the RSA context is the one used for the + * verification. hash_id in the function call is the type of hash + * that is verified. According to RFC 3447 it is advised to + * keep both hashes the same. + */ +int rsa_pkcs1_verify( rsa_context *ctx, + int mode, + int hash_id, + unsigned int hashlen, + const unsigned char *hash, + unsigned char *sig ); + +/** + * \brief Free the components of an RSA key + * + * \param ctx RSA Context to free + */ +void rsa_free( rsa_context *ctx ); + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int rsa_self_test( int verbose ); + +#ifdef __cplusplus +} +#endif + +#endif /* rsa.h */ |