diff options
Diffstat (limited to 'drivers/mfd/wm8350-core.c')
| -rw-r--r-- | drivers/mfd/wm8350-core.c | 778 |
1 files changed, 778 insertions, 0 deletions
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c new file mode 100644 index 00000000..dd1caaac --- /dev/null +++ b/drivers/mfd/wm8350-core.c @@ -0,0 +1,778 @@ +/* + * wm8350-core.c -- Device access for Wolfson WM8350 + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood, Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> + +#include <linux/mfd/wm8350/core.h> +#include <linux/mfd/wm8350/audio.h> +#include <linux/mfd/wm8350/comparator.h> +#include <linux/mfd/wm8350/gpio.h> +#include <linux/mfd/wm8350/pmic.h> +#include <linux/mfd/wm8350/rtc.h> +#include <linux/mfd/wm8350/supply.h> +#include <linux/mfd/wm8350/wdt.h> + +#define WM8350_UNLOCK_KEY 0x0013 +#define WM8350_LOCK_KEY 0x0000 + +#define WM8350_CLOCK_CONTROL_1 0x28 +#define WM8350_AIF_TEST 0x74 + +/* debug */ +#define WM8350_BUS_DEBUG 0 +#if WM8350_BUS_DEBUG +#define dump(regs, src) do { \ + int i_; \ + u16 *src_ = src; \ + printk(KERN_DEBUG); \ + for (i_ = 0; i_ < regs; i_++) \ + printk(" 0x%4.4x", *src_++); \ + printk("\n"); \ +} while (0); +#else +#define dump(bytes, src) +#endif + +#define WM8350_LOCK_DEBUG 0 +#if WM8350_LOCK_DEBUG +#define ldbg(format, arg...) printk(format, ## arg) +#else +#define ldbg(format, arg...) +#endif + +/* + * WM8350 Device IO + */ +static DEFINE_MUTEX(io_mutex); +static DEFINE_MUTEX(reg_lock_mutex); + +/* Perform a physical read from the device. + */ +static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, + u16 *dest) +{ + int i, ret; + int bytes = num_regs * 2; + + dev_dbg(wm8350->dev, "volatile read\n"); + ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest); + + for (i = reg; i < reg + num_regs; i++) { + /* Cache is CPU endian */ + dest[i - reg] = be16_to_cpu(dest[i - reg]); + + /* Mask out non-readable bits */ + dest[i - reg] &= wm8350_reg_io_map[i].readable; + } + + dump(num_regs, dest); + + return ret; +} + +static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest) +{ + int i; + int end = reg + num_regs; + int ret = 0; + int bytes = num_regs * 2; + + if (wm8350->read_dev == NULL) + return -ENODEV; + + if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) { + dev_err(wm8350->dev, "invalid reg %x\n", + reg + num_regs - 1); + return -EINVAL; + } + + dev_dbg(wm8350->dev, + "%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs); + +#if WM8350_BUS_DEBUG + /* we can _safely_ read any register, but warn if read not supported */ + for (i = reg; i < end; i++) { + if (!wm8350_reg_io_map[i].readable) + dev_warn(wm8350->dev, + "reg R%d is not readable\n", i); + } +#endif + + /* if any volatile registers are required, then read back all */ + for (i = reg; i < end; i++) + if (wm8350_reg_io_map[i].vol) + return wm8350_phys_read(wm8350, reg, num_regs, dest); + + /* no volatiles, then cache is good */ + dev_dbg(wm8350->dev, "cache read\n"); + memcpy(dest, &wm8350->reg_cache[reg], bytes); + dump(num_regs, dest); + return ret; +} + +static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg) +{ + if (reg == WM8350_SECURITY || + wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY) + return 0; + + if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 && + reg <= WM8350_GPIO_FUNCTION_SELECT_4) || + (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 && + reg <= WM8350_BATTERY_CHARGER_CONTROL_3)) + return 1; + return 0; +} + +static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) +{ + int i; + int end = reg + num_regs; + int bytes = num_regs * 2; + + if (wm8350->write_dev == NULL) + return -ENODEV; + + if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) { + dev_err(wm8350->dev, "invalid reg %x\n", + reg + num_regs - 1); + return -EINVAL; + } + + /* it's generally not a good idea to write to RO or locked registers */ + for (i = reg; i < end; i++) { + if (!wm8350_reg_io_map[i].writable) { + dev_err(wm8350->dev, + "attempted write to read only reg R%d\n", i); + return -EINVAL; + } + + if (is_reg_locked(wm8350, i)) { + dev_err(wm8350->dev, + "attempted write to locked reg R%d\n", i); + return -EINVAL; + } + + src[i - reg] &= wm8350_reg_io_map[i].writable; + + wm8350->reg_cache[i] = + (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) + | src[i - reg]; + + src[i - reg] = cpu_to_be16(src[i - reg]); + } + + /* Actually write it out */ + return wm8350->write_dev(wm8350, reg, bytes, (char *)src); +} + +/* + * Safe read, modify, write methods + */ +int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) { + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + goto out; + } + + data &= ~mask; + err = wm8350_write(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); +out: + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_clear_bits); + +int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) { + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + goto out; + } + + data |= mask; + err = wm8350_write(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); +out: + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_set_bits); + +u16 wm8350_reg_read(struct wm8350 *wm8350, int reg) +{ + u16 data; + int err; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, reg, 1, &data); + if (err) + dev_err(wm8350->dev, "read from reg R%d failed\n", reg); + + mutex_unlock(&io_mutex); + return data; +} +EXPORT_SYMBOL_GPL(wm8350_reg_read); + +int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val) +{ + int ret; + u16 data = val; + + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, reg, 1, &data); + if (ret) + dev_err(wm8350->dev, "write to reg R%d failed\n", reg); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_write); + +int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs, + u16 *dest) +{ + int err = 0; + + mutex_lock(&io_mutex); + err = wm8350_read(wm8350, start_reg, regs, dest); + if (err) + dev_err(wm8350->dev, "block read starting from R%d failed\n", + start_reg); + mutex_unlock(&io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(wm8350_block_read); + +int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs, + u16 *src) +{ + int ret = 0; + + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, start_reg, regs, src); + if (ret) + dev_err(wm8350->dev, "block write starting at R%d failed\n", + start_reg); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_block_write); + +/** + * wm8350_reg_lock() + * + * The WM8350 has a hardware lock which can be used to prevent writes to + * some registers (generally those which can cause particularly serious + * problems if misused). This function enables that lock. + */ +int wm8350_reg_lock(struct wm8350 *wm8350) +{ + u16 key = WM8350_LOCK_KEY; + int ret; + + ldbg(__func__); + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key); + if (ret) + dev_err(wm8350->dev, "lock failed\n"); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_lock); + +/** + * wm8350_reg_unlock() + * + * The WM8350 has a hardware lock which can be used to prevent writes to + * some registers (generally those which can cause particularly serious + * problems if misused). This function disables that lock so updates + * can be performed. For maximum safety this should be done only when + * required. + */ +int wm8350_reg_unlock(struct wm8350 *wm8350) +{ + u16 key = WM8350_UNLOCK_KEY; + int ret; + + ldbg(__func__); + mutex_lock(&io_mutex); + ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key); + if (ret) + dev_err(wm8350->dev, "unlock failed\n"); + mutex_unlock(&io_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_reg_unlock); + +int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref) +{ + u16 reg, result = 0; + + if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP) + return -EINVAL; + if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP + && (scale != 0 || vref != 0)) + return -EINVAL; + + mutex_lock(&wm8350->auxadc_mutex); + + /* Turn on the ADC */ + reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA); + + if (scale || vref) { + reg = scale << 13; + reg |= vref << 12; + wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg); + } + + reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); + reg |= 1 << channel | WM8350_AUXADC_POLL; + wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg); + + /* If a late IRQ left the completion signalled then consume + * the completion. */ + try_wait_for_completion(&wm8350->auxadc_done); + + /* We ignore the result of the completion and just check for a + * conversion result, allowing us to soldier on if the IRQ + * infrastructure is not set up for the chip. */ + wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5)); + + reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); + if (reg & WM8350_AUXADC_POLL) + dev_err(wm8350->dev, "adc chn %d read timeout\n", channel); + else + result = wm8350_reg_read(wm8350, + WM8350_AUX1_READBACK + channel); + + /* Turn off the ADC */ + reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, + reg & ~WM8350_AUXADC_ENA); + + mutex_unlock(&wm8350->auxadc_mutex); + + return result & WM8350_AUXADC_DATA1_MASK; +} +EXPORT_SYMBOL_GPL(wm8350_read_auxadc); + +static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data) +{ + struct wm8350 *wm8350 = irq_data; + + complete(&wm8350->auxadc_done); + + return IRQ_HANDLED; +} + +/* + * Cache is always host endian. + */ +static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) +{ + int i, ret = 0; + u16 value; + const u16 *reg_map; + + switch (type) { + case 0: + switch (mode) { +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + case 0: + reg_map = wm8350_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1 + case 1: + reg_map = wm8350_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2 + case 2: + reg_map = wm8350_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3 + case 3: + reg_map = wm8350_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8350 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + + case 1: + switch (mode) { +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0 + case 0: + reg_map = wm8351_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1 + case 1: + reg_map = wm8351_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2 + case 2: + reg_map = wm8351_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3 + case 3: + reg_map = wm8351_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8351 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + + case 2: + switch (mode) { +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0 + case 0: + reg_map = wm8352_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1 + case 1: + reg_map = wm8352_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2 + case 2: + reg_map = wm8352_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3 + case 3: + reg_map = wm8352_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8352 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + + default: + dev_err(wm8350->dev, + "WM835x configuration mode %d not supported\n", + mode); + return -EINVAL; + } + + wm8350->reg_cache = + kmalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL); + if (wm8350->reg_cache == NULL) + return -ENOMEM; + + /* Read the initial cache state back from the device - this is + * a PMIC so the device many not be in a virgin state and we + * can't rely on the silicon values. + */ + ret = wm8350->read_dev(wm8350, 0, + sizeof(u16) * (WM8350_MAX_REGISTER + 1), + wm8350->reg_cache); + if (ret < 0) { + dev_err(wm8350->dev, + "failed to read initial cache values\n"); + goto out; + } + + /* Mask out uncacheable/unreadable bits and the audio. */ + for (i = 0; i < WM8350_MAX_REGISTER; i++) { + if (wm8350_reg_io_map[i].readable && + (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { + value = be16_to_cpu(wm8350->reg_cache[i]); + value &= wm8350_reg_io_map[i].readable; + wm8350->reg_cache[i] = value; + } else + wm8350->reg_cache[i] = reg_map[i]; + } + +out: + kfree(wm8350->reg_cache); + return ret; +} + +/* + * Register a client device. This is non-fatal since there is no need to + * fail the entire device init due to a single platform device failing. + */ +static void wm8350_client_dev_register(struct wm8350 *wm8350, + const char *name, + struct platform_device **pdev) +{ + int ret; + + *pdev = platform_device_alloc(name, -1); + if (*pdev == NULL) { + dev_err(wm8350->dev, "Failed to allocate %s\n", name); + return; + } + + (*pdev)->dev.parent = wm8350->dev; + platform_set_drvdata(*pdev, wm8350); + ret = platform_device_add(*pdev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret); + platform_device_put(*pdev); + *pdev = NULL; + } +} + +int wm8350_device_init(struct wm8350 *wm8350, int irq, + struct wm8350_platform_data *pdata) +{ + int ret; + u16 id1, id2, mask_rev; + u16 cust_id, mode, chip_rev; + + dev_set_drvdata(wm8350->dev, wm8350); + + /* get WM8350 revision and config mode */ + ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), + &mask_rev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read revision: %d\n", ret); + goto err; + } + + id1 = be16_to_cpu(id1); + id2 = be16_to_cpu(id2); + mask_rev = be16_to_cpu(mask_rev); + + if (id1 != 0x6143) { + dev_err(wm8350->dev, + "Device with ID %x is not a WM8350\n", id1); + ret = -ENODEV; + goto err; + } + + mode = id2 & WM8350_CONF_STS_MASK >> 10; + cust_id = id2 & WM8350_CUST_ID_MASK; + chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12; + dev_info(wm8350->dev, + "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n", + mode, cust_id, mask_rev, chip_rev); + + if (cust_id != 0) { + dev_err(wm8350->dev, "Unsupported CUST_ID\n"); + ret = -ENODEV; + goto err; + } + + switch (mask_rev) { + case 0: + wm8350->pmic.max_dcdc = WM8350_DCDC_6; + wm8350->pmic.max_isink = WM8350_ISINK_B; + + switch (chip_rev) { + case WM8350_REV_E: + dev_info(wm8350->dev, "WM8350 Rev E\n"); + break; + case WM8350_REV_F: + dev_info(wm8350->dev, "WM8350 Rev F\n"); + break; + case WM8350_REV_G: + dev_info(wm8350->dev, "WM8350 Rev G\n"); + wm8350->power.rev_g_coeff = 1; + break; + case WM8350_REV_H: + dev_info(wm8350->dev, "WM8350 Rev H\n"); + wm8350->power.rev_g_coeff = 1; + break; + default: + /* For safety we refuse to run on unknown hardware */ + dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + + case 1: + wm8350->pmic.max_dcdc = WM8350_DCDC_4; + wm8350->pmic.max_isink = WM8350_ISINK_A; + + switch (chip_rev) { + case 0: + dev_info(wm8350->dev, "WM8351 Rev A\n"); + wm8350->power.rev_g_coeff = 1; + break; + + case 1: + dev_info(wm8350->dev, "WM8351 Rev B\n"); + wm8350->power.rev_g_coeff = 1; + break; + + default: + dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + + case 2: + wm8350->pmic.max_dcdc = WM8350_DCDC_6; + wm8350->pmic.max_isink = WM8350_ISINK_B; + + switch (chip_rev) { + case 0: + dev_info(wm8350->dev, "WM8352 Rev A\n"); + wm8350->power.rev_g_coeff = 1; + break; + + default: + dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + + default: + dev_err(wm8350->dev, "Unknown MASK_REV\n"); + ret = -ENODEV; + goto err; + } + + ret = wm8350_create_cache(wm8350, mask_rev, mode); + if (ret < 0) { + dev_err(wm8350->dev, "Failed to create register cache\n"); + return ret; + } + + mutex_init(&wm8350->auxadc_mutex); + init_completion(&wm8350->auxadc_done); + + ret = wm8350_irq_init(wm8350, irq, pdata); + if (ret < 0) + goto err_free; + + if (wm8350->irq_base) { + ret = request_threaded_irq(wm8350->irq_base + + WM8350_IRQ_AUXADC_DATARDY, + NULL, wm8350_auxadc_irq, 0, + "auxadc", wm8350); + if (ret < 0) + dev_warn(wm8350->dev, + "Failed to request AUXADC IRQ: %d\n", ret); + } + + if (pdata && pdata->init) { + ret = pdata->init(wm8350); + if (ret != 0) { + dev_err(wm8350->dev, "Platform init() failed: %d\n", + ret); + goto err_irq; + } + } + + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0); + + wm8350_client_dev_register(wm8350, "wm8350-codec", + &(wm8350->codec.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-gpio", + &(wm8350->gpio.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-hwmon", + &(wm8350->hwmon.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-power", + &(wm8350->power.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev)); + wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev)); + + return 0; + +err_irq: + wm8350_irq_exit(wm8350); +err_free: + kfree(wm8350->reg_cache); +err: + return ret; +} +EXPORT_SYMBOL_GPL(wm8350_device_init); + +void wm8350_device_exit(struct wm8350 *wm8350) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++) + platform_device_unregister(wm8350->pmic.led[i].pdev); + + for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++) + platform_device_unregister(wm8350->pmic.pdev[i]); + + platform_device_unregister(wm8350->wdt.pdev); + platform_device_unregister(wm8350->rtc.pdev); + platform_device_unregister(wm8350->power.pdev); + platform_device_unregister(wm8350->hwmon.pdev); + platform_device_unregister(wm8350->gpio.pdev); + platform_device_unregister(wm8350->codec.pdev); + + if (wm8350->irq_base) + free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350); + + wm8350_irq_exit(wm8350); + + kfree(wm8350->reg_cache); +} +EXPORT_SYMBOL_GPL(wm8350_device_exit); + +MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver"); +MODULE_LICENSE("GPL"); |