diff options
Diffstat (limited to 'drivers/isdn/hardware/mISDN/hfcmulti.c')
| -rw-r--r-- | drivers/isdn/hardware/mISDN/hfcmulti.c | 5507 |
1 files changed, 5507 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c new file mode 100644 index 00000000..03322318 --- /dev/null +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -0,0 +1,5507 @@ +/* + * hfcmulti.c low level driver for hfc-4s/hfc-8s/hfc-e1 based cards + * + * Author Andreas Eversberg (jolly@eversberg.eu) + * ported to mqueue mechanism: + * Peter Sprenger (sprengermoving-bytes.de) + * + * inspired by existing hfc-pci driver: + * Copyright 1999 by Werner Cornelius (werner@isdn-development.de) + * Copyright 2008 by Karsten Keil (kkeil@suse.de) + * Copyright 2008 by Andreas Eversberg (jolly@eversberg.eu) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * Thanks to Cologne Chip AG for this great controller! + */ + +/* + * module parameters: + * type: + * By default (0), the card is automatically detected. + * Or use the following combinations: + * Bit 0-7 = 0x00001 = HFC-E1 (1 port) + * or Bit 0-7 = 0x00004 = HFC-4S (4 ports) + * or Bit 0-7 = 0x00008 = HFC-8S (8 ports) + * Bit 8 = 0x00100 = uLaw (instead of aLaw) + * Bit 9 = 0x00200 = Disable DTMF detect on all B-channels via hardware + * Bit 10 = spare + * Bit 11 = 0x00800 = Force PCM bus into slave mode. (otherwhise auto) + * or Bit 12 = 0x01000 = Force PCM bus into master mode. (otherwhise auto) + * Bit 13 = spare + * Bit 14 = 0x04000 = Use external ram (128K) + * Bit 15 = 0x08000 = Use external ram (512K) + * Bit 16 = 0x10000 = Use 64 timeslots instead of 32 + * or Bit 17 = 0x20000 = Use 128 timeslots instead of anything else + * Bit 18 = spare + * Bit 19 = 0x80000 = Send the Watchdog a Signal (Dual E1 with Watchdog) + * (all other bits are reserved and shall be 0) + * example: 0x20204 one HFC-4S with dtmf detection and 128 timeslots on PCM + * bus (PCM master) + * + * port: (optional or required for all ports on all installed cards) + * HFC-4S/HFC-8S only bits: + * Bit 0 = 0x001 = Use master clock for this S/T interface + * (ony once per chip). + * Bit 1 = 0x002 = transmitter line setup (non capacitive mode) + * Don't use this unless you know what you are doing! + * Bit 2 = 0x004 = Disable E-channel. (No E-channel processing) + * example: 0x0001,0x0000,0x0000,0x0000 one HFC-4S with master clock + * received from port 1 + * + * HFC-E1 only bits: + * Bit 0 = 0x0001 = interface: 0=copper, 1=optical + * Bit 1 = 0x0002 = reserved (later for 32 B-channels transparent mode) + * Bit 2 = 0x0004 = Report LOS + * Bit 3 = 0x0008 = Report AIS + * Bit 4 = 0x0010 = Report SLIP + * Bit 5 = 0x0020 = Report RDI + * Bit 8 = 0x0100 = Turn off CRC-4 Multiframe Mode, use double frame + * mode instead. + * Bit 9 = 0x0200 = Force get clock from interface, even in NT mode. + * or Bit 10 = 0x0400 = Force put clock to interface, even in TE mode. + * Bit 11 = 0x0800 = Use direct RX clock for PCM sync rather than PLL. + * (E1 only) + * Bit 12-13 = 0xX000 = elastic jitter buffer (1-3), Set both bits to 0 + * for default. + * (all other bits are reserved and shall be 0) + * + * debug: + * NOTE: only one debug value must be given for all cards + * enable debugging (see hfc_multi.h for debug options) + * + * poll: + * NOTE: only one poll value must be given for all cards + * Give the number of samples for each fifo process. + * By default 128 is used. Decrease to reduce delay, increase to + * reduce cpu load. If unsure, don't mess with it! + * Valid is 8, 16, 32, 64, 128, 256. + * + * pcm: + * NOTE: only one pcm value must be given for every card. + * The PCM bus id tells the mISDNdsp module about the connected PCM bus. + * By default (0), the PCM bus id is 100 for the card that is PCM master. + * If multiple cards are PCM master (because they are not interconnected), + * each card with PCM master will have increasing PCM id. + * All PCM busses with the same ID are expected to be connected and have + * common time slots slots. + * Only one chip of the PCM bus must be master, the others slave. + * -1 means no support of PCM bus not even. + * Omit this value, if all cards are interconnected or none is connected. + * If unsure, don't give this parameter. + * + * dslot: + * NOTE: only one dslot value must be given for every card. + * Also this value must be given for non-E1 cards. If omitted, the E1 + * card has D-channel on time slot 16, which is default. + * If 1..15 or 17..31, an alternate time slot is used for D-channel. + * In this case, the application must be able to handle this. + * If -1 is given, the D-channel is disabled and all 31 slots can be used + * for B-channel. (only for specific applications) + * If you don't know how to use it, you don't need it! + * + * iomode: + * NOTE: only one mode value must be given for every card. + * -> See hfc_multi.h for HFC_IO_MODE_* values + * By default, the IO mode is pci memory IO (MEMIO). + * Some cards require specific IO mode, so it cannot be changed. + * It may be useful to set IO mode to register io (REGIO) to solve + * PCI bridge problems. + * If unsure, don't give this parameter. + * + * clockdelay_nt: + * NOTE: only one clockdelay_nt value must be given once for all cards. + * Give the value of the clock control register (A_ST_CLK_DLY) + * of the S/T interfaces in NT mode. + * This register is needed for the TBR3 certification, so don't change it. + * + * clockdelay_te: + * NOTE: only one clockdelay_te value must be given once + * Give the value of the clock control register (A_ST_CLK_DLY) + * of the S/T interfaces in TE mode. + * This register is needed for the TBR3 certification, so don't change it. + * + * clock: + * NOTE: only one clock value must be given once + * Selects interface with clock source for mISDN and applications. + * Set to card number starting with 1. Set to -1 to disable. + * By default, the first card is used as clock source. + * + * hwid: + * NOTE: only one hwid value must be given once + * Enable special embedded devices with XHFC controllers. + */ + +/* + * debug register access (never use this, it will flood your system log) + * #define HFC_REGISTER_DEBUG + */ + +#define HFC_MULTI_VERSION "2.03" + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/mISDNhw.h> +#include <linux/mISDNdsp.h> + +/* + #define IRQCOUNT_DEBUG + #define IRQ_DEBUG +*/ + +#include "hfc_multi.h" +#ifdef ECHOPREP +#include "gaintab.h" +#endif + +#define MAX_CARDS 8 +#define MAX_PORTS (8 * MAX_CARDS) + +static LIST_HEAD(HFClist); +static spinlock_t HFClock; /* global hfc list lock */ + +static void ph_state_change(struct dchannel *); + +static struct hfc_multi *syncmaster; +static int plxsd_master; /* if we have a master card (yet) */ +static spinlock_t plx_lock; /* may not acquire other lock inside */ + +#define TYP_E1 1 +#define TYP_4S 4 +#define TYP_8S 8 + +static int poll_timer = 6; /* default = 128 samples = 16ms */ +/* number of POLL_TIMER interrupts for G2 timeout (ca 1s) */ +static int nt_t1_count[] = { 3840, 1920, 960, 480, 240, 120, 60, 30 }; +#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */ +#define CLKDEL_NT 0x6c /* CLKDEL in NT mode + (0x60 MUST be included!) */ + +#define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */ +#define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */ +#define DIP_E1 0x3 /* DIP Switches for Beronet E1 cards */ + +/* + * module stuff + */ + +static uint type[MAX_CARDS]; +static int pcm[MAX_CARDS]; +static int dslot[MAX_CARDS]; +static uint iomode[MAX_CARDS]; +static uint port[MAX_PORTS]; +static uint debug; +static uint poll; +static int clock; +static uint timer; +static uint clockdelay_te = CLKDEL_TE; +static uint clockdelay_nt = CLKDEL_NT; +#define HWID_NONE 0 +#define HWID_MINIP4 1 +#define HWID_MINIP8 2 +#define HWID_MINIP16 3 +static uint hwid = HWID_NONE; + +static int HFC_cnt, Port_cnt, PCM_cnt = 99; + +MODULE_AUTHOR("Andreas Eversberg"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(HFC_MULTI_VERSION); +module_param(debug, uint, S_IRUGO | S_IWUSR); +module_param(poll, uint, S_IRUGO | S_IWUSR); +module_param(clock, int, S_IRUGO | S_IWUSR); +module_param(timer, uint, S_IRUGO | S_IWUSR); +module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR); +module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR); +module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR); +module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR); +module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR); +module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR); +module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR); +module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */ + +#ifdef HFC_REGISTER_DEBUG +#define HFC_outb(hc, reg, val) \ + (hc->HFC_outb(hc, reg, val, __func__, __LINE__)) +#define HFC_outb_nodebug(hc, reg, val) \ + (hc->HFC_outb_nodebug(hc, reg, val, __func__, __LINE__)) +#define HFC_inb(hc, reg) \ + (hc->HFC_inb(hc, reg, __func__, __LINE__)) +#define HFC_inb_nodebug(hc, reg) \ + (hc->HFC_inb_nodebug(hc, reg, __func__, __LINE__)) +#define HFC_inw(hc, reg) \ + (hc->HFC_inw(hc, reg, __func__, __LINE__)) +#define HFC_inw_nodebug(hc, reg) \ + (hc->HFC_inw_nodebug(hc, reg, __func__, __LINE__)) +#define HFC_wait(hc) \ + (hc->HFC_wait(hc, __func__, __LINE__)) +#define HFC_wait_nodebug(hc) \ + (hc->HFC_wait_nodebug(hc, __func__, __LINE__)) +#else +#define HFC_outb(hc, reg, val) (hc->HFC_outb(hc, reg, val)) +#define HFC_outb_nodebug(hc, reg, val) (hc->HFC_outb_nodebug(hc, reg, val)) +#define HFC_inb(hc, reg) (hc->HFC_inb(hc, reg)) +#define HFC_inb_nodebug(hc, reg) (hc->HFC_inb_nodebug(hc, reg)) +#define HFC_inw(hc, reg) (hc->HFC_inw(hc, reg)) +#define HFC_inw_nodebug(hc, reg) (hc->HFC_inw_nodebug(hc, reg)) +#define HFC_wait(hc) (hc->HFC_wait(hc)) +#define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc)) +#endif + +#ifdef CONFIG_MISDN_HFCMULTI_8xx +#include "hfc_multi_8xx.h" +#endif + +/* HFC_IO_MODE_PCIMEM */ +static void +#ifdef HFC_REGISTER_DEBUG +HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val, + const char *function, int line) +#else + HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val) +#endif +{ + writeb(val, hc->pci_membase + reg); +} +static u_char +#ifdef HFC_REGISTER_DEBUG +HFC_inb_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else + HFC_inb_pcimem(struct hfc_multi *hc, u_char reg) +#endif +{ + return readb(hc->pci_membase + reg); +} +static u_short +#ifdef HFC_REGISTER_DEBUG +HFC_inw_pcimem(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else + HFC_inw_pcimem(struct hfc_multi *hc, u_char reg) +#endif +{ + return readw(hc->pci_membase + reg); +} +static void +#ifdef HFC_REGISTER_DEBUG +HFC_wait_pcimem(struct hfc_multi *hc, const char *function, int line) +#else + HFC_wait_pcimem(struct hfc_multi *hc) +#endif +{ + while (readb(hc->pci_membase + R_STATUS) & V_BUSY) + cpu_relax(); +} + +/* HFC_IO_MODE_REGIO */ +static void +#ifdef HFC_REGISTER_DEBUG +HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val, + const char *function, int line) +#else + HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val) +#endif +{ + outb(reg, hc->pci_iobase + 4); + outb(val, hc->pci_iobase); +} +static u_char +#ifdef HFC_REGISTER_DEBUG +HFC_inb_regio(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else + HFC_inb_regio(struct hfc_multi *hc, u_char reg) +#endif +{ + outb(reg, hc->pci_iobase + 4); + return inb(hc->pci_iobase); +} +static u_short +#ifdef HFC_REGISTER_DEBUG +HFC_inw_regio(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else + HFC_inw_regio(struct hfc_multi *hc, u_char reg) +#endif +{ + outb(reg, hc->pci_iobase + 4); + return inw(hc->pci_iobase); +} +static void +#ifdef HFC_REGISTER_DEBUG +HFC_wait_regio(struct hfc_multi *hc, const char *function, int line) +#else + HFC_wait_regio(struct hfc_multi *hc) +#endif +{ + outb(R_STATUS, hc->pci_iobase + 4); + while (inb(hc->pci_iobase) & V_BUSY) + cpu_relax(); +} + +#ifdef HFC_REGISTER_DEBUG +static void +HFC_outb_debug(struct hfc_multi *hc, u_char reg, u_char val, + const char *function, int line) +{ + char regname[256] = "", bits[9] = "xxxxxxxx"; + int i; + + i = -1; + while (hfc_register_names[++i].name) { + if (hfc_register_names[i].reg == reg) + strcat(regname, hfc_register_names[i].name); + } + if (regname[0] == '\0') + strcpy(regname, "register"); + + bits[7] = '0' + (!!(val & 1)); + bits[6] = '0' + (!!(val & 2)); + bits[5] = '0' + (!!(val & 4)); + bits[4] = '0' + (!!(val & 8)); + bits[3] = '0' + (!!(val & 16)); + bits[2] = '0' + (!!(val & 32)); + bits[1] = '0' + (!!(val & 64)); + bits[0] = '0' + (!!(val & 128)); + printk(KERN_DEBUG + "HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n", + hc->id, reg, regname, val, bits, function, line); + HFC_outb_nodebug(hc, reg, val); +} +static u_char +HFC_inb_debug(struct hfc_multi *hc, u_char reg, const char *function, int line) +{ + char regname[256] = "", bits[9] = "xxxxxxxx"; + u_char val = HFC_inb_nodebug(hc, reg); + int i; + + i = 0; + while (hfc_register_names[i++].name) + ; + while (hfc_register_names[++i].name) { + if (hfc_register_names[i].reg == reg) + strcat(regname, hfc_register_names[i].name); + } + if (regname[0] == '\0') + strcpy(regname, "register"); + + bits[7] = '0' + (!!(val & 1)); + bits[6] = '0' + (!!(val & 2)); + bits[5] = '0' + (!!(val & 4)); + bits[4] = '0' + (!!(val & 8)); + bits[3] = '0' + (!!(val & 16)); + bits[2] = '0' + (!!(val & 32)); + bits[1] = '0' + (!!(val & 64)); + bits[0] = '0' + (!!(val & 128)); + printk(KERN_DEBUG + "HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n", + hc->id, reg, regname, val, bits, function, line); + return val; +} +static u_short +HFC_inw_debug(struct hfc_multi *hc, u_char reg, const char *function, int line) +{ + char regname[256] = ""; + u_short val = HFC_inw_nodebug(hc, reg); + int i; + + i = 0; + while (hfc_register_names[i++].name) + ; + while (hfc_register_names[++i].name) { + if (hfc_register_names[i].reg == reg) + strcat(regname, hfc_register_names[i].name); + } + if (regname[0] == '\0') + strcpy(regname, "register"); + + printk(KERN_DEBUG + "HFC_inw(chip %d, %02x=%s) = 0x%04x; in %s() line %d\n", + hc->id, reg, regname, val, function, line); + return val; +} +static void +HFC_wait_debug(struct hfc_multi *hc, const char *function, int line) +{ + printk(KERN_DEBUG "HFC_wait(chip %d); in %s() line %d\n", + hc->id, function, line); + HFC_wait_nodebug(hc); +} +#endif + +/* write fifo data (REGIO) */ +static void +write_fifo_regio(struct hfc_multi *hc, u_char *data, int len) +{ + outb(A_FIFO_DATA0, (hc->pci_iobase) + 4); + while (len >> 2) { + outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase); + data += 4; + len -= 4; + } + while (len >> 1) { + outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase); + data += 2; + len -= 2; + } + while (len) { + outb(*data, hc->pci_iobase); + data++; + len--; + } +} +/* write fifo data (PCIMEM) */ +static void +write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) +{ + while (len >> 2) { + writel(cpu_to_le32(*(u32 *)data), + hc->pci_membase + A_FIFO_DATA0); + data += 4; + len -= 4; + } + while (len >> 1) { + writew(cpu_to_le16(*(u16 *)data), + hc->pci_membase + A_FIFO_DATA0); + data += 2; + len -= 2; + } + while (len) { + writeb(*data, hc->pci_membase + A_FIFO_DATA0); + data++; + len--; + } +} + +/* read fifo data (REGIO) */ +static void +read_fifo_regio(struct hfc_multi *hc, u_char *data, int len) +{ + outb(A_FIFO_DATA0, (hc->pci_iobase) + 4); + while (len >> 2) { + *(u32 *)data = le32_to_cpu(inl(hc->pci_iobase)); + data += 4; + len -= 4; + } + while (len >> 1) { + *(u16 *)data = le16_to_cpu(inw(hc->pci_iobase)); + data += 2; + len -= 2; + } + while (len) { + *data = inb(hc->pci_iobase); + data++; + len--; + } +} + +/* read fifo data (PCIMEM) */ +static void +read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) +{ + while (len >> 2) { + *(u32 *)data = + le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0)); + data += 4; + len -= 4; + } + while (len >> 1) { + *(u16 *)data = + le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0)); + data += 2; + len -= 2; + } + while (len) { + *data = readb(hc->pci_membase + A_FIFO_DATA0); + data++; + len--; + } +} + +static void +enable_hwirq(struct hfc_multi *hc) +{ + hc->hw.r_irq_ctrl |= V_GLOB_IRQ_EN; + HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl); +} + +static void +disable_hwirq(struct hfc_multi *hc) +{ + hc->hw.r_irq_ctrl &= ~((u_char)V_GLOB_IRQ_EN); + HFC_outb(hc, R_IRQ_CTRL, hc->hw.r_irq_ctrl); +} + +#define NUM_EC 2 +#define MAX_TDM_CHAN 32 + + +inline void +enablepcibridge(struct hfc_multi *c) +{ + HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); /* was _io before */ +} + +inline void +disablepcibridge(struct hfc_multi *c) +{ + HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x2); /* was _io before */ +} + +inline unsigned char +readpcibridge(struct hfc_multi *hc, unsigned char address) +{ + unsigned short cipv; + unsigned char data; + + if (!hc->pci_iobase) + return 0; + + /* slow down a PCI read access by 1 PCI clock cycle */ + HFC_outb(hc, R_CTRL, 0x4); /*was _io before*/ + + if (address == 0) + cipv = 0x4000; + else + cipv = 0x5800; + + /* select local bridge port address by writing to CIP port */ + /* data = HFC_inb(c, cipv); * was _io before */ + outw(cipv, hc->pci_iobase + 4); + data = inb(hc->pci_iobase); + + /* restore R_CTRL for normal PCI read cycle speed */ + HFC_outb(hc, R_CTRL, 0x0); /* was _io before */ + + return data; +} + +inline void +writepcibridge(struct hfc_multi *hc, unsigned char address, unsigned char data) +{ + unsigned short cipv; + unsigned int datav; + + if (!hc->pci_iobase) + return; + + if (address == 0) + cipv = 0x4000; + else + cipv = 0x5800; + + /* select local bridge port address by writing to CIP port */ + outw(cipv, hc->pci_iobase + 4); + /* define a 32 bit dword with 4 identical bytes for write sequence */ + datav = data | ((__u32) data << 8) | ((__u32) data << 16) | + ((__u32) data << 24); + + /* + * write this 32 bit dword to the bridge data port + * this will initiate a write sequence of up to 4 writes to the same + * address on the local bus interface the number of write accesses + * is undefined but >=1 and depends on the next PCI transaction + * during write sequence on the local bus + */ + outl(datav, hc->pci_iobase); +} + +inline void +cpld_set_reg(struct hfc_multi *hc, unsigned char reg) +{ + /* Do data pin read low byte */ + HFC_outb(hc, R_GPIO_OUT1, reg); +} + +inline void +cpld_write_reg(struct hfc_multi *hc, unsigned char reg, unsigned char val) +{ + cpld_set_reg(hc, reg); + + enablepcibridge(hc); + writepcibridge(hc, 1, val); + disablepcibridge(hc); + + return; +} + +inline unsigned char +cpld_read_reg(struct hfc_multi *hc, unsigned char reg) +{ + unsigned char bytein; + + cpld_set_reg(hc, reg); + + /* Do data pin read low byte */ + HFC_outb(hc, R_GPIO_OUT1, reg); + + enablepcibridge(hc); + bytein = readpcibridge(hc, 1); + disablepcibridge(hc); + + return bytein; +} + +inline void +vpm_write_address(struct hfc_multi *hc, unsigned short addr) +{ + cpld_write_reg(hc, 0, 0xff & addr); + cpld_write_reg(hc, 1, 0x01 & (addr >> 8)); +} + +inline unsigned short +vpm_read_address(struct hfc_multi *c) +{ + unsigned short addr; + unsigned short highbit; + + addr = cpld_read_reg(c, 0); + highbit = cpld_read_reg(c, 1); + + addr = addr | (highbit << 8); + + return addr & 0x1ff; +} + +inline unsigned char +vpm_in(struct hfc_multi *c, int which, unsigned short addr) +{ + unsigned char res; + + vpm_write_address(c, addr); + + if (!which) + cpld_set_reg(c, 2); + else + cpld_set_reg(c, 3); + + enablepcibridge(c); + res = readpcibridge(c, 1); + disablepcibridge(c); + + cpld_set_reg(c, 0); + + return res; +} + +inline void +vpm_out(struct hfc_multi *c, int which, unsigned short addr, + unsigned char data) +{ + vpm_write_address(c, addr); + + enablepcibridge(c); + + if (!which) + cpld_set_reg(c, 2); + else + cpld_set_reg(c, 3); + + writepcibridge(c, 1, data); + + cpld_set_reg(c, 0); + + disablepcibridge(c); + + { + unsigned char regin; + regin = vpm_in(c, which, addr); + if (regin != data) + printk(KERN_DEBUG "Wrote 0x%x to register 0x%x but got back " + "0x%x\n", data, addr, regin); + } + +} + + +static void +vpm_init(struct hfc_multi *wc) +{ + unsigned char reg; + unsigned int mask; + unsigned int i, x, y; + unsigned int ver; + + for (x = 0; x < NUM_EC; x++) { + /* Setup GPIO's */ + if (!x) { + ver = vpm_in(wc, x, 0x1a0); + printk(KERN_DEBUG "VPM: Chip %d: ver %02x\n", x, ver); + } + + for (y = 0; y < 4; y++) { + vpm_out(wc, x, 0x1a8 + y, 0x00); /* GPIO out */ + vpm_out(wc, x, 0x1ac + y, 0x00); /* GPIO dir */ + vpm_out(wc, x, 0x1b0 + y, 0x00); /* GPIO sel */ + } + + /* Setup TDM path - sets fsync and tdm_clk as inputs */ + reg = vpm_in(wc, x, 0x1a3); /* misc_con */ + vpm_out(wc, x, 0x1a3, reg & ~2); + + /* Setup Echo length (256 taps) */ + vpm_out(wc, x, 0x022, 1); + vpm_out(wc, x, 0x023, 0xff); + + /* Setup timeslots */ + vpm_out(wc, x, 0x02f, 0x00); + mask = 0x02020202 << (x * 4); + + /* Setup the tdm channel masks for all chips */ + for (i = 0; i < 4; i++) + vpm_out(wc, x, 0x33 - i, (mask >> (i << 3)) & 0xff); + + /* Setup convergence rate */ + printk(KERN_DEBUG "VPM: A-law mode\n"); + reg = 0x00 | 0x10 | 0x01; + vpm_out(wc, x, 0x20, reg); + printk(KERN_DEBUG "VPM reg 0x20 is %x\n", reg); + /*vpm_out(wc, x, 0x20, (0x00 | 0x08 | 0x20 | 0x10)); */ + + vpm_out(wc, x, 0x24, 0x02); + reg = vpm_in(wc, x, 0x24); + printk(KERN_DEBUG "NLP Thresh is set to %d (0x%x)\n", reg, reg); + + /* Initialize echo cans */ + for (i = 0; i < MAX_TDM_CHAN; i++) { + if (mask & (0x00000001 << i)) + vpm_out(wc, x, i, 0x00); + } + + /* + * ARM arch at least disallows a udelay of + * more than 2ms... it gives a fake "__bad_udelay" + * reference at link-time. + * long delays in kernel code are pretty sucky anyway + * for now work around it using 5 x 2ms instead of 1 x 10ms + */ + + udelay(2000); + udelay(2000); + udelay(2000); + udelay(2000); + udelay(2000); + + /* Put in bypass mode */ + for (i = 0; i < MAX_TDM_CHAN; i++) { + if (mask & (0x00000001 << i)) + vpm_out(wc, x, i, 0x01); + } + + /* Enable bypass */ + for (i = 0; i < MAX_TDM_CHAN; i++) { + if (mask & (0x00000001 << i)) + vpm_out(wc, x, 0x78 + i, 0x01); + } + + } +} + +#ifdef UNUSED +static void +vpm_check(struct hfc_multi *hctmp) +{ + unsigned char gpi2; + + gpi2 = HFC_inb(hctmp, R_GPI_IN2); + + if ((gpi2 & 0x3) != 0x3) + printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2); +} +#endif /* UNUSED */ + + +/* + * Interface to enable/disable the HW Echocan + * + * these functions are called within a spin_lock_irqsave on + * the channel instance lock, so we are not disturbed by irqs + * + * we can later easily change the interface to make other + * things configurable, for now we configure the taps + * + */ + +static void +vpm_echocan_on(struct hfc_multi *hc, int ch, int taps) +{ + unsigned int timeslot; + unsigned int unit; + struct bchannel *bch = hc->chan[ch].bch; +#ifdef TXADJ + int txadj = -4; + struct sk_buff *skb; +#endif + if (hc->chan[ch].protocol != ISDN_P_B_RAW) + return; + + if (!bch) + return; + +#ifdef TXADJ + skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX, + sizeof(int), &txadj, GFP_ATOMIC); + if (skb) + recv_Bchannel_skb(bch, skb); +#endif + + timeslot = ((ch / 4) * 8) + ((ch % 4) * 4) + 1; + unit = ch % 4; + + printk(KERN_NOTICE "vpm_echocan_on called taps [%d] on timeslot %d\n", + taps, timeslot); + + vpm_out(hc, unit, timeslot, 0x7e); +} + +static void +vpm_echocan_off(struct hfc_multi *hc, int ch) +{ + unsigned int timeslot; + unsigned int unit; + struct bchannel *bch = hc->chan[ch].bch; +#ifdef TXADJ + int txadj = 0; + struct sk_buff *skb; +#endif + + if (hc->chan[ch].protocol != ISDN_P_B_RAW) + return; + + if (!bch) + return; + +#ifdef TXADJ + skb = _alloc_mISDN_skb(PH_CONTROL_IND, HFC_VOL_CHANGE_TX, + sizeof(int), &txadj, GFP_ATOMIC); + if (skb) + recv_Bchannel_skb(bch, skb); +#endif + + timeslot = ((ch / 4) * 8) + ((ch % 4) * 4) + 1; + unit = ch % 4; + + printk(KERN_NOTICE "vpm_echocan_off called on timeslot %d\n", + timeslot); + /* FILLME */ + vpm_out(hc, unit, timeslot, 0x01); +} + + +/* + * Speech Design resync feature + * NOTE: This is called sometimes outside interrupt handler. + * We must lock irqsave, so no other interrupt (other card) will occur! + * Also multiple interrupts may nest, so must lock each access (lists, card)! + */ +static inline void +hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) +{ + struct hfc_multi *hc, *next, *pcmmaster = NULL; + void __iomem *plx_acc_32; + u_int pv; + u_long flags; + + spin_lock_irqsave(&HFClock, flags); + spin_lock(&plx_lock); /* must be locked inside other locks */ + + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "%s: RESYNC(syncmaster=0x%p)\n", + __func__, syncmaster); + + /* select new master */ + if (newmaster) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "using provided controller\n"); + } else { + list_for_each_entry_safe(hc, next, &HFClist, list) { + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + if (hc->syncronized) { + newmaster = hc; + break; + } + } + } + } + + /* Disable sync of all cards */ + list_for_each_entry_safe(hc, next, &HFClist, list) { + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + pv &= ~PLX_SYNC_O_EN; + writel(pv, plx_acc_32); + if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) { + pcmmaster = hc; + if (hc->ctype == HFC_TYPE_E1) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG + "Schedule SYNC_I\n"); + hc->e1_resync |= 1; /* get SYNC_I */ + } + } + } + } + + if (newmaster) { + hc = newmaster; + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "id=%d (0x%p) = syncronized with " + "interface.\n", hc->id, hc); + /* Enable new sync master */ + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + pv |= PLX_SYNC_O_EN; + writel(pv, plx_acc_32); + /* switch to jatt PLL, if not disabled by RX_SYNC */ + if (hc->ctype == HFC_TYPE_E1 + && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "Schedule jatt PLL\n"); + hc->e1_resync |= 2; /* switch to jatt */ + } + } else { + if (pcmmaster) { + hc = pcmmaster; + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG + "id=%d (0x%p) = PCM master syncronized " + "with QUARTZ\n", hc->id, hc); + if (hc->ctype == HFC_TYPE_E1) { + /* Use the crystal clock for the PCM + master card */ + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG + "Schedule QUARTZ for HFC-E1\n"); + hc->e1_resync |= 4; /* switch quartz */ + } else { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG + "QUARTZ is automatically " + "enabled by HFC-%dS\n", hc->ctype); + } + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + pv |= PLX_SYNC_O_EN; + writel(pv, plx_acc_32); + } else + if (!rm) + printk(KERN_ERR "%s no pcm master, this MUST " + "not happen!\n", __func__); + } + syncmaster = newmaster; + + spin_unlock(&plx_lock); + spin_unlock_irqrestore(&HFClock, flags); +} + +/* This must be called AND hc must be locked irqsave!!! */ +inline void +plxsd_checksync(struct hfc_multi *hc, int rm) +{ + if (hc->syncronized) { + if (syncmaster == NULL) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "%s: GOT sync on card %d" + " (id=%d)\n", __func__, hc->id + 1, + hc->id); + hfcmulti_resync(hc, hc, rm); + } + } else { + if (syncmaster == hc) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "%s: LOST sync on card %d" + " (id=%d)\n", __func__, hc->id + 1, + hc->id); + hfcmulti_resync(hc, NULL, rm); + } + } +} + + +/* + * free hardware resources used by driver + */ +static void +release_io_hfcmulti(struct hfc_multi *hc) +{ + void __iomem *plx_acc_32; + u_int pv; + u_long plx_flags; + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: entered\n", __func__); + + /* soft reset also masks all interrupts */ + hc->hw.r_cirm |= V_SRES; + HFC_outb(hc, R_CIRM, hc->hw.r_cirm); + udelay(1000); + hc->hw.r_cirm &= ~V_SRES; + HFC_outb(hc, R_CIRM, hc->hw.r_cirm); + udelay(1000); /* instead of 'wait' that may cause locking */ + + /* release Speech Design card, if PLX was initialized */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && hc->plx_membase) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "%s: release PLXSD card %d\n", + __func__, hc->id + 1); + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + writel(PLX_GPIOC_INIT, plx_acc_32); + pv = readl(plx_acc_32); + /* Termination off */ + pv &= ~PLX_TERM_ON; + /* Disconnect the PCM */ + pv |= PLX_SLAVE_EN_N; + pv &= ~PLX_MASTER_EN; + pv &= ~PLX_SYNC_O_EN; + /* Put the DSP in Reset */ + pv &= ~PLX_DSP_RES_N; + writel(pv, plx_acc_32); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n", + __func__, pv); + spin_unlock_irqrestore(&plx_lock, plx_flags); + } + + /* disable memory mapped ports / io ports */ + test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */ + if (hc->pci_dev) + pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0); + if (hc->pci_membase) + iounmap(hc->pci_membase); + if (hc->plx_membase) + iounmap(hc->plx_membase); + if (hc->pci_iobase) + release_region(hc->pci_iobase, 8); + if (hc->xhfc_membase) + iounmap((void *)hc->xhfc_membase); + + if (hc->pci_dev) { + pci_disable_device(hc->pci_dev); + pci_set_drvdata(hc->pci_dev, NULL); + } + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: done\n", __func__); +} + +/* + * function called to reset the HFC chip. A complete software reset of chip + * and fifos is done. All configuration of the chip is done. + */ + +static int +init_chip(struct hfc_multi *hc) +{ + u_long flags, val, val2 = 0, rev; + int i, err = 0; + u_char r_conf_en, rval; + void __iomem *plx_acc_32; + u_int pv; + u_long plx_flags, hfc_flags; + int plx_count; + struct hfc_multi *pos, *next, *plx_last_hc; + + spin_lock_irqsave(&hc->lock, flags); + /* reset all registers */ + memset(&hc->hw, 0, sizeof(struct hfcm_hw)); + + /* revision check */ + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: entered\n", __func__); + val = HFC_inb(hc, R_CHIP_ID); + if ((val >> 4) != 0x8 && (val >> 4) != 0xc && (val >> 4) != 0xe && + (val >> 1) != 0x31) { + printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val); + err = -EIO; + goto out; + } + rev = HFC_inb(hc, R_CHIP_RV); + printk(KERN_INFO + "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n", + val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ? + " (old FIFO handling)" : ""); + if (hc->ctype != HFC_TYPE_XHFC && rev == 0) { + test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip); + printk(KERN_WARNING + "HFC_multi: NOTE: Your chip is revision 0, " + "ask Cologne Chip for update. Newer chips " + "have a better FIFO handling. Old chips " + "still work but may have slightly lower " + "HDLC transmit performance.\n"); + } + if (rev > 1) { + printk(KERN_WARNING "HFC_multi: WARNING: This driver doesn't " + "consider chip revision = %ld. The chip / " + "bridge may not work.\n", rev); + } + + /* set s-ram size */ + hc->Flen = 0x10; + hc->Zmin = 0x80; + hc->Zlen = 384; + hc->DTMFbase = 0x1000; + if (test_bit(HFC_CHIP_EXRAM_128, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: changing to 128K extenal RAM\n", + __func__); + hc->hw.r_ctrl |= V_EXT_RAM; + hc->hw.r_ram_sz = 1; + hc->Flen = 0x20; + hc->Zmin = 0xc0; + hc->Zlen = 1856; + hc->DTMFbase = 0x2000; + } + if (test_bit(HFC_CHIP_EXRAM_512, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: changing to 512K extenal RAM\n", + __func__); + hc->hw.r_ctrl |= V_EXT_RAM; + hc->hw.r_ram_sz = 2; + hc->Flen = 0x20; + hc->Zmin = 0xc0; + hc->Zlen = 8000; + hc->DTMFbase = 0x2000; + } + if (hc->ctype == HFC_TYPE_XHFC) { + hc->Flen = 0x8; + hc->Zmin = 0x0; + hc->Zlen = 64; + hc->DTMFbase = 0x0; + } + hc->max_trans = poll << 1; + if (hc->max_trans > hc->Zlen) + hc->max_trans = hc->Zlen; + + /* Speech Design PLX bridge */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "%s: initializing PLXSD card %d\n", + __func__, hc->id + 1); + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + writel(PLX_GPIOC_INIT, plx_acc_32); + pv = readl(plx_acc_32); + /* The first and the last cards are terminating the PCM bus */ + pv |= PLX_TERM_ON; /* hc is currently the last */ + /* Disconnect the PCM */ + pv |= PLX_SLAVE_EN_N; + pv &= ~PLX_MASTER_EN; + pv &= ~PLX_SYNC_O_EN; + /* Put the DSP in Reset */ + pv &= ~PLX_DSP_RES_N; + writel(pv, plx_acc_32); + spin_unlock_irqrestore(&plx_lock, plx_flags); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n", + __func__, pv); + /* + * If we are the 3rd PLXSD card or higher, we must turn + * termination of last PLXSD card off. + */ + spin_lock_irqsave(&HFClock, hfc_flags); + plx_count = 0; + plx_last_hc = NULL; + list_for_each_entry_safe(pos, next, &HFClist, list) { + if (test_bit(HFC_CHIP_PLXSD, &pos->chip)) { + plx_count++; + if (pos != hc) + plx_last_hc = pos; + } + } + if (plx_count >= 3) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "%s: card %d is between, so " + "we disable termination\n", + __func__, plx_last_hc->id + 1); + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc_32 = plx_last_hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + pv &= ~PLX_TERM_ON; + writel(pv, plx_acc_32); + spin_unlock_irqrestore(&plx_lock, plx_flags); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: term off: PLX_GPIO=%x\n", + __func__, pv); + } + spin_unlock_irqrestore(&HFClock, hfc_flags); + hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */ + } + + if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) + hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */ + + /* we only want the real Z2 read-pointer for revision > 0 */ + if (!test_bit(HFC_CHIP_REVISION0, &hc->chip)) + hc->hw.r_ram_sz |= V_FZ_MD; + + /* select pcm mode */ + if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: setting PCM into slave mode\n", + __func__); + } else + if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) && !plxsd_master) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: setting PCM into master mode\n", + __func__); + hc->hw.r_pcm_md0 |= V_PCM_MD; + } else { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: performing PCM auto detect\n", + __func__); + } + + /* soft reset */ + HFC_outb(hc, R_CTRL, hc->hw.r_ctrl); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, 0x0C /* R_FIFO_THRES */, + 0x11 /* 16 Bytes TX/RX */); + else + HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); + HFC_outb(hc, R_FIFO_MD, 0); + if (hc->ctype == HFC_TYPE_XHFC) + hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES; + else + hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES + | V_RLD_EPR; + HFC_outb(hc, R_CIRM, hc->hw.r_cirm); + udelay(100); + hc->hw.r_cirm = 0; + HFC_outb(hc, R_CIRM, hc->hw.r_cirm); + udelay(100); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); + + /* Speech Design PLX bridge pcm and sync mode */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + /* Connect PCM */ + if (hc->hw.r_pcm_md0 & V_PCM_MD) { + pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N; + pv |= PLX_SYNC_O_EN; + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n", + __func__, pv); + } else { + pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N); + pv &= ~PLX_SYNC_O_EN; + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n", + __func__, pv); + } + writel(pv, plx_acc_32); + spin_unlock_irqrestore(&plx_lock, plx_flags); + } + + /* PCM setup */ + HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x90); + if (hc->slots == 32) + HFC_outb(hc, R_PCM_MD1, 0x00); + if (hc->slots == 64) + HFC_outb(hc, R_PCM_MD1, 0x10); + if (hc->slots == 128) + HFC_outb(hc, R_PCM_MD1, 0x20); + HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0); + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) + HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */ + else if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) + HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */ + else + HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */ + HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00); + for (i = 0; i < 256; i++) { + HFC_outb_nodebug(hc, R_SLOT, i); + HFC_outb_nodebug(hc, A_SL_CFG, 0); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb_nodebug(hc, A_CONF, 0); + hc->slot_owner[i] = -1; + } + + /* set clock speed */ + if (test_bit(HFC_CHIP_CLOCK2, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: setting double clock\n", __func__); + HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK); + } + + if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) + HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */); + + /* B410P GPIO */ + if (test_bit(HFC_CHIP_B410P, &hc->chip)) { + printk(KERN_NOTICE "Setting GPIOs\n"); + HFC_outb(hc, R_GPIO_SEL, 0x30); + HFC_outb(hc, R_GPIO_EN1, 0x3); + udelay(1000); + printk(KERN_NOTICE "calling vpm_init\n"); + vpm_init(hc); + } + + /* check if R_F0_CNT counts (8 kHz frame count) */ + val = HFC_inb(hc, R_F0_CNTL); + val += HFC_inb(hc, R_F0_CNTH) << 8; + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "HFC_multi F0_CNT %ld after reset\n", val); + spin_unlock_irqrestore(&hc->lock, flags); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout((HZ / 100) ? : 1); /* Timeout minimum 10ms */ + spin_lock_irqsave(&hc->lock, flags); + val2 = HFC_inb(hc, R_F0_CNTL); + val2 += HFC_inb(hc, R_F0_CNTH) << 8; + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "HFC_multi F0_CNT %ld after 10 ms (1st try)\n", + val2); + if (val2 >= val + 8) { /* 1 ms */ + /* it counts, so we keep the pcm mode */ + if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) + printk(KERN_INFO "controller is PCM bus MASTER\n"); + else + if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) + printk(KERN_INFO "controller is PCM bus SLAVE\n"); + else { + test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); + printk(KERN_INFO "controller is PCM bus SLAVE " + "(auto detected)\n"); + } + } else { + /* does not count */ + if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) { + controller_fail: + printk(KERN_ERR "HFC_multi ERROR, getting no 125us " + "pulse. Seems that controller fails.\n"); + err = -EIO; + goto out; + } + if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { + printk(KERN_INFO "controller is PCM bus SLAVE " + "(ignoring missing PCM clock)\n"); + } else { + /* only one pcm master */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip) + && plxsd_master) { + printk(KERN_ERR "HFC_multi ERROR, no clock " + "on another Speech Design card found. " + "Please be sure to connect PCM cable.\n"); + err = -EIO; + goto out; + } + /* retry with master clock */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N; + pv |= PLX_SYNC_O_EN; + writel(pv, plx_acc_32); + spin_unlock_irqrestore(&plx_lock, plx_flags); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: master: " + "PLX_GPIO=%x\n", __func__, pv); + } + hc->hw.r_pcm_md0 |= V_PCM_MD; + HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00); + spin_unlock_irqrestore(&hc->lock, flags); + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout((HZ / 100) ?: 1); /* Timeout min. 10ms */ + spin_lock_irqsave(&hc->lock, flags); + val2 = HFC_inb(hc, R_F0_CNTL); + val2 += HFC_inb(hc, R_F0_CNTH) << 8; + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "HFC_multi F0_CNT %ld after " + "10 ms (2nd try)\n", val2); + if (val2 >= val + 8) { /* 1 ms */ + test_and_set_bit(HFC_CHIP_PCM_MASTER, + &hc->chip); + printk(KERN_INFO "controller is PCM bus MASTER " + "(auto detected)\n"); + } else + goto controller_fail; + } + } + + /* Release the DSP Reset */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) + plxsd_master = 1; + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc_32 = hc->plx_membase + PLX_GPIOC; + pv = readl(plx_acc_32); + pv |= PLX_DSP_RES_N; + writel(pv, plx_acc_32); + spin_unlock_irqrestore(&plx_lock, plx_flags); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n", + __func__, pv); + } + + /* pcm id */ + if (hc->pcm) + printk(KERN_INFO "controller has given PCM BUS ID %d\n", + hc->pcm); + else { + if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip) + || test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + PCM_cnt++; /* SD has proprietary bridging */ + } + hc->pcm = PCM_cnt; + printk(KERN_INFO "controller has PCM BUS ID %d " + "(auto selected)\n", hc->pcm); + } + + /* set up timer */ + HFC_outb(hc, R_TI_WD, poll_timer); + hc->hw.r_irqmsk_misc |= V_TI_IRQMSK; + + /* set E1 state machine IRQ */ + if (hc->ctype == HFC_TYPE_E1) + hc->hw.r_irqmsk_misc |= V_STA_IRQMSK; + + /* set DTMF detection */ + if (test_bit(HFC_CHIP_DTMF, &hc->chip)) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: enabling DTMF detection " + "for all B-channel\n", __func__); + hc->hw.r_dtmf = V_DTMF_EN | V_DTMF_STOP; + if (test_bit(HFC_CHIP_ULAW, &hc->chip)) + hc->hw.r_dtmf |= V_ULAW_SEL; + HFC_outb(hc, R_DTMF_N, 102 - 1); + hc->hw.r_irqmsk_misc |= V_DTMF_IRQMSK; + } + + /* conference engine */ + if (test_bit(HFC_CHIP_ULAW, &hc->chip)) + r_conf_en = V_CONF_EN | V_ULAW; + else + r_conf_en = V_CONF_EN; + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, R_CONF_EN, r_conf_en); + + /* setting leds */ + switch (hc->leds) { + case 1: /* HFC-E1 OEM */ + if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip)) + HFC_outb(hc, R_GPIO_SEL, 0x32); + else + HFC_outb(hc, R_GPIO_SEL, 0x30); + + HFC_outb(hc, R_GPIO_EN1, 0x0f); + HFC_outb(hc, R_GPIO_OUT1, 0x00); + + HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3); + break; + + case 2: /* HFC-4S OEM */ + case 3: + HFC_outb(hc, R_GPIO_SEL, 0xf0); + HFC_outb(hc, R_GPIO_EN1, 0xff); + HFC_outb(hc, R_GPIO_OUT1, 0x00); + break; + } + + if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) { + hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */ + HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync); + } + + /* set master clock */ + if (hc->masterclk >= 0) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: setting ST master clock " + "to port %d (0..%d)\n", + __func__, hc->masterclk, hc->ports - 1); + hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC); + HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync); + } + + + + /* setting misc irq */ + HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "r_irqmsk_misc.2: 0x%x\n", + hc->hw.r_irqmsk_misc); + + /* RAM access test */ + HFC_outb(hc, R_RAM_ADDR0, 0); + HFC_outb(hc, R_RAM_ADDR1, 0); + HFC_outb(hc, R_RAM_ADDR2, 0); + for (i = 0; i < 256; i++) { + HFC_outb_nodebug(hc, R_RAM_ADDR0, i); + HFC_outb_nodebug(hc, R_RAM_DATA, ((i * 3) & 0xff)); + } + for (i = 0; i < 256; i++) { + HFC_outb_nodebug(hc, R_RAM_ADDR0, i); + HFC_inb_nodebug(hc, R_RAM_DATA); + rval = HFC_inb_nodebug(hc, R_INT_DATA); + if (rval != ((i * 3) & 0xff)) { + printk(KERN_DEBUG + "addr:%x val:%x should:%x\n", i, rval, + (i * 3) & 0xff); + err++; + } + } + if (err) { + printk(KERN_DEBUG "aborting - %d RAM access errors\n", err); + err = -EIO; + goto out; + } + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: done\n", __func__); +out: + spin_unlock_irqrestore(&hc->lock, flags); + return err; +} + + +/* + * control the watchdog + */ +static void +hfcmulti_watchdog(struct hfc_multi *hc) +{ + hc->wdcount++; + + if (hc->wdcount > 10) { + hc->wdcount = 0; + hc->wdbyte = hc->wdbyte == V_GPIO_OUT2 ? + V_GPIO_OUT3 : V_GPIO_OUT2; + + /* printk("Sending Watchdog Kill %x\n",hc->wdbyte); */ + HFC_outb(hc, R_GPIO_EN0, V_GPIO_EN2 | V_GPIO_EN3); + HFC_outb(hc, R_GPIO_OUT0, hc->wdbyte); + } +} + + + +/* + * output leds + */ +static void +hfcmulti_leds(struct hfc_multi *hc) +{ + unsigned long lled; + unsigned long leddw; + int i, state, active, leds; + struct dchannel *dch; + int led[4]; + + hc->ledcount += poll; + if (hc->ledcount > 4096) { + hc->ledcount -= 4096; + hc->ledstate = 0xAFFEAFFE; + } + + switch (hc->leds) { + case 1: /* HFC-E1 OEM */ + /* 2 red blinking: NT mode deactivate + * 2 red steady: TE mode deactivate + * left green: L1 active + * left red: frame sync, but no L1 + * right green: L2 active + */ + if (hc->chan[hc->dslot].sync != 2) { /* no frame sync */ + if (hc->chan[hc->dslot].dch->dev.D.protocol + != ISDN_P_NT_E1) { + led[0] = 1; + led[1] = 1; + } else if (hc->ledcount >> 11) { + led[0] = 1; + led[1] = 1; + } else { + led[0] = 0; + led[1] = 0; + } + led[2] = 0; + led[3] = 0; + } else { /* with frame sync */ + /* TODO make it work */ + led[0] = 0; + led[1] = 0; + led[2] = 0; + led[3] = 1; + } + leds = (led[0] | (led[1]<<2) | (led[2]<<1) | (led[3]<<3))^0xF; + /* leds are inverted */ + if (leds != (int)hc->ledstate) { + HFC_outb_nodebug(hc, R_GPIO_OUT1, leds); + hc->ledstate = leds; + } + break; + + case 2: /* HFC-4S OEM */ + /* red blinking = PH_DEACTIVATE NT Mode + * red steady = PH_DEACTIVATE TE Mode + * green steady = PH_ACTIVATE + */ + for (i = 0; i < 4; i++) { + state = 0; + active = -1; + dch = hc->chan[(i << 2) | 2].dch; + if (dch) { + state = dch->state; + if (dch->dev.D.protocol == ISDN_P_NT_S0) + active = 3; + else + active = 7; + } + if (state) { + if (state == active) { + led[i] = 1; /* led green */ + } else + if (dch->dev.D.protocol == ISDN_P_TE_S0) + /* TE mode: led red */ + led[i] = 2; + else + if (hc->ledcount >> 11) + /* led red */ + led[i] = 2; + else + /* led off */ + led[i] = 0; + } else + led[i] = 0; /* led off */ + } + if (test_bit(HFC_CHIP_B410P, &hc->chip)) { + leds = 0; + for (i = 0; i < 4; i++) { + if (led[i] == 1) { + /*green*/ + leds |= (0x2 << (i * 2)); + } else if (led[i] == 2) { + /*red*/ + leds |= (0x1 << (i * 2)); + } + } + if (leds != (int)hc->ledstate) { + vpm_out(hc, 0, 0x1a8 + 3, leds); + hc->ledstate = leds; + } + } else { + leds = ((led[3] > 0) << 0) | ((led[1] > 0) << 1) | + ((led[0] > 0) << 2) | ((led[2] > 0) << 3) | + ((led[3] & 1) << 4) | ((led[1] & 1) << 5) | + ((led[0] & 1) << 6) | ((led[2] & 1) << 7); + if (leds != (int)hc->ledstate) { + HFC_outb_nodebug(hc, R_GPIO_EN1, leds & 0x0F); + HFC_outb_nodebug(hc, R_GPIO_OUT1, leds >> 4); + hc->ledstate = leds; + } + } + break; + + case 3: /* HFC 1S/2S Beronet */ + /* red blinking = PH_DEACTIVATE NT Mode + * red steady = PH_DEACTIVATE TE Mode + * green steady = PH_ACTIVATE + */ + for (i = 0; i < 2; i++) { + state = 0; + active = -1; + dch = hc->chan[(i << 2) | 2].dch; + if (dch) { + state = dch->state; + if (dch->dev.D.protocol == ISDN_P_NT_S0) + active = 3; + else + active = 7; + } + if (state) { + if (state == active) { + led[i] = 1; /* led green */ + } else + if (dch->dev.D.protocol == ISDN_P_TE_S0) + /* TE mode: led red */ + led[i] = 2; + else + if (hc->ledcount >> 11) + /* led red */ + led[i] = 2; + else + /* led off */ + led[i] = 0; + } else + led[i] = 0; /* led off */ + } + + + leds = (led[0] > 0) | ((led[1] > 0) << 1) | ((led[0]&1) << 2) + | ((led[1]&1) << 3); + if (leds != (int)hc->ledstate) { + HFC_outb_nodebug(hc, R_GPIO_EN1, + ((led[0] > 0) << 2) | ((led[1] > 0) << 3)); + HFC_outb_nodebug(hc, R_GPIO_OUT1, + ((led[0] & 1) << 2) | ((led[1] & 1) << 3)); + hc->ledstate = leds; + } + break; + case 8: /* HFC 8S+ Beronet */ + lled = 0; + + for (i = 0; i < 8; i++) { + state = 0; + active = -1; + dch = hc->chan[(i << 2) | 2].dch; + if (dch) { + state = dch->state; + if (dch->dev.D.protocol == ISDN_P_NT_S0) + active = 3; + else + active = 7; + } + if (state) { + if (state == active) { + lled |= 0 << i; + } else + if (hc->ledcount >> 11) + lled |= 0 << i; + else + lled |= 1 << i; + } else + lled |= 1 << i; + } + leddw = lled << 24 | lled << 16 | lled << 8 | lled; + if (leddw != hc->ledstate) { + /* HFC_outb(hc, R_BRG_PCM_CFG, 1); + HFC_outb(c, R_BRG_PCM_CFG, (0x0 << 6) | 0x3); */ + /* was _io before */ + HFC_outb_nodebug(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK); + outw(0x4000, hc->pci_iobase + 4); + outl(leddw, hc->pci_iobase); + HFC_outb_nodebug(hc, R_BRG_PCM_CFG, V_PCM_CLK); + hc->ledstate = leddw; + } + break; + } +} +/* + * read dtmf coefficients + */ + +static void +hfcmulti_dtmf(struct hfc_multi *hc) +{ + s32 *coeff; + u_int mantissa; + int co, ch; + struct bchannel *bch = NULL; + u8 exponent; + int dtmf = 0; + int addr; + u16 w_float; + struct sk_buff *skb; + struct mISDNhead *hh; + + if (debug & DEBUG_HFCMULTI_DTMF) + printk(KERN_DEBUG "%s: dtmf detection irq\n", __func__); + for (ch = 0; ch <= 31; ch++) { + /* only process enabled B-channels */ + bch = hc->chan[ch].bch; + if (!bch) + continue; + if (!hc->created[hc->chan[ch].port]) + continue; + if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) + continue; + if (debug & DEBUG_HFCMULTI_DTMF) + printk(KERN_DEBUG "%s: dtmf channel %d:", + __func__, ch); + coeff = &(hc->chan[ch].coeff[hc->chan[ch].coeff_count * 16]); + dtmf = 1; + for (co = 0; co < 8; co++) { + /* read W(n-1) coefficient */ + addr = hc->DTMFbase + ((co << 7) | (ch << 2)); + HFC_outb_nodebug(hc, R_RAM_ADDR0, addr); + HFC_outb_nodebug(hc, R_RAM_ADDR1, addr >> 8); + HFC_outb_nodebug(hc, R_RAM_ADDR2, (addr >> 16) + | V_ADDR_INC); + w_float = HFC_inb_nodebug(hc, R_RAM_DATA); + w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8); + if (debug & DEBUG_HFCMULTI_DTMF) + printk(" %04x", w_float); + + /* decode float (see chip doc) */ + mantissa = w_float & 0x0fff; + if (w_float & 0x8000) + mantissa |= 0xfffff000; + exponent = (w_float >> 12) & 0x7; + if (exponent) { + mantissa ^= 0x1000; + mantissa <<= (exponent - 1); + } + + /* store coefficient */ + coeff[co << 1] = mantissa; + + /* read W(n) coefficient */ + w_float = HFC_inb_nodebug(hc, R_RAM_DATA); + w_float |= (HFC_inb_nodebug(hc, R_RAM_DATA) << 8); + if (debug & DEBUG_HFCMULTI_DTMF) + printk(" %04x", w_float); + + /* decode float (see chip doc) */ + mantissa = w_float & 0x0fff; + if (w_float & 0x8000) + mantissa |= 0xfffff000; + exponent = (w_float >> 12) & 0x7; + if (exponent) { + mantissa ^= 0x1000; + mantissa <<= (exponent - 1); + } + + /* store coefficient */ + coeff[(co << 1) | 1] = mantissa; + } + if (debug & DEBUG_HFCMULTI_DTMF) + printk(" DTMF ready %08x %08x %08x %08x " + "%08x %08x %08x %08x\n", + coeff[0], coeff[1], coeff[2], coeff[3], + coeff[4], coeff[5], coeff[6], coeff[7]); + hc->chan[ch].coeff_count++; + if (hc->chan[ch].coeff_count == 8) { + hc->chan[ch].coeff_count = 0; + skb = mI_alloc_skb(512, GFP_ATOMIC); + if (!skb) { + printk(KERN_DEBUG "%s: No memory for skb\n", + __func__); + continue; + } + hh = mISDN_HEAD_P(skb); + hh->prim = PH_CONTROL_IND; + hh->id = DTMF_HFC_COEF; + memcpy(skb_put(skb, 512), hc->chan[ch].coeff, 512); + recv_Bchannel_skb(bch, skb); + } + } + + /* restart DTMF processing */ + hc->dtmf = dtmf; + if (dtmf) + HFC_outb_nodebug(hc, R_DTMF, hc->hw.r_dtmf | V_RST_DTMF); +} + + +/* + * fill fifo as much as possible + */ + +static void +hfcmulti_tx(struct hfc_multi *hc, int ch) +{ + int i, ii, temp, len = 0; + int Zspace, z1, z2; /* must be int for calculation */ + int Fspace, f1, f2; + u_char *d; + int *txpending, slot_tx; + struct bchannel *bch; + struct dchannel *dch; + struct sk_buff **sp = NULL; + int *idxp; + + bch = hc->chan[ch].bch; + dch = hc->chan[ch].dch; + if ((!dch) && (!bch)) + return; + + txpending = &hc->chan[ch].txpending; + slot_tx = hc->chan[ch].slot_tx; + if (dch) { + if (!test_bit(FLG_ACTIVE, &dch->Flags)) + return; + sp = &dch->tx_skb; + idxp = &dch->tx_idx; + } else { + if (!test_bit(FLG_ACTIVE, &bch->Flags)) + return; + sp = &bch->tx_skb; + idxp = &bch->tx_idx; + } + if (*sp) + len = (*sp)->len; + + if ((!len) && *txpending != 1) + return; /* no data */ + + if (test_bit(HFC_CHIP_B410P, &hc->chip) && + (hc->chan[ch].protocol == ISDN_P_B_RAW) && + (hc->chan[ch].slot_rx < 0) && + (hc->chan[ch].slot_tx < 0)) + HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1)); + else + HFC_outb_nodebug(hc, R_FIFO, ch << 1); + HFC_wait_nodebug(hc); + + if (*txpending == 2) { + /* reset fifo */ + HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait_nodebug(hc); + HFC_outb(hc, A_SUBCH_CFG, 0); + *txpending = 1; + } +next_frame: + if (dch || test_bit(FLG_HDLC, &bch->Flags)) { + f1 = HFC_inb_nodebug(hc, A_F1); + f2 = HFC_inb_nodebug(hc, A_F2); + while (f2 != (temp = HFC_inb_nodebug(hc, A_F2))) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG + "%s(card %d): reread f2 because %d!=%d\n", + __func__, hc->id + 1, temp, f2); + f2 = temp; /* repeat until F2 is equal */ + } + Fspace = f2 - f1 - 1; + if (Fspace < 0) + Fspace += hc->Flen; + /* + * Old FIFO handling doesn't give us the current Z2 read + * pointer, so we cannot send the next frame before the fifo + * is empty. It makes no difference except for a slightly + * lower performance. + */ + if (test_bit(HFC_CHIP_REVISION0, &hc->chip)) { + if (f1 != f2) + Fspace = 0; + else + Fspace = 1; + } + /* one frame only for ST D-channels, to allow resending */ + if (hc->ctype != HFC_TYPE_E1 && dch) { + if (f1 != f2) + Fspace = 0; + } + /* F-counter full condition */ + if (Fspace == 0) + return; + } + z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin; + z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin; + while (z2 != (temp = (HFC_inw_nodebug(hc, A_Z2) - hc->Zmin))) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG "%s(card %d): reread z2 because " + "%d!=%d\n", __func__, hc->id + 1, temp, z2); + z2 = temp; /* repeat unti Z2 is equal */ + } + hc->chan[ch].Zfill = z1 - z2; + if (hc->chan[ch].Zfill < 0) + hc->chan[ch].Zfill += hc->Zlen; + Zspace = z2 - z1; + if (Zspace <= 0) + Zspace += hc->Zlen; + Zspace -= 4; /* keep not too full, so pointers will not overrun */ + /* fill transparent data only to maxinum transparent load (minus 4) */ + if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) + Zspace = Zspace - hc->Zlen + hc->max_trans; + if (Zspace <= 0) /* no space of 4 bytes */ + return; + + /* if no data */ + if (!len) { + if (z1 == z2) { /* empty */ + /* if done with FIFO audio data during PCM connection */ + if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && + *txpending && slot_tx >= 0) { + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG + "%s: reconnecting PCM due to no " + "more FIFO data: channel %d " + "slot_tx %d\n", + __func__, ch, slot_tx); + /* connect slot */ + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0xc0 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | + V_HDLC_TRP | V_IFF); + HFC_outb_nodebug(hc, R_FIFO, ch << 1 | 1); + HFC_wait_nodebug(hc); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0xc0 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | + V_HDLC_TRP | V_IFF); + HFC_outb_nodebug(hc, R_FIFO, ch << 1); + HFC_wait_nodebug(hc); + } + *txpending = 0; + } + return; /* no data */ + } + + /* "fill fifo if empty" feature */ + if (bch && test_bit(FLG_FILLEMPTY, &bch->Flags) + && !test_bit(FLG_HDLC, &bch->Flags) && z2 == z1) { + if (debug & DEBUG_HFCMULTI_FILL) + printk(KERN_DEBUG "%s: buffer empty, so we have " + "underrun\n", __func__); + /* fill buffer, to prevent future underrun */ + hc->write_fifo(hc, hc->silence_data, poll >> 1); + Zspace -= (poll >> 1); + } + + /* if audio data and connected slot */ + if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending) + && slot_tx >= 0) { + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG "%s: disconnecting PCM due to " + "FIFO data: channel %d slot_tx %d\n", + __func__, ch, slot_tx); + /* disconnect slot */ + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0x80 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | + V_HDLC_TRP | V_IFF); + HFC_outb_nodebug(hc, R_FIFO, ch << 1 | 1); + HFC_wait_nodebug(hc); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0x80 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | + V_HDLC_TRP | V_IFF); + HFC_outb_nodebug(hc, R_FIFO, ch << 1); + HFC_wait_nodebug(hc); + } + *txpending = 1; + + /* show activity */ + hc->activity[hc->chan[ch].port] = 1; + + /* fill fifo to what we have left */ + ii = len; + if (dch || test_bit(FLG_HDLC, &bch->Flags)) + temp = 1; + else + temp = 0; + i = *idxp; + d = (*sp)->data + i; + if (ii - i > Zspace) + ii = Zspace + i; + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space " + "left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n", + __func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i, + temp ? "HDLC" : "TRANS"); + + /* Have to prep the audio data */ + hc->write_fifo(hc, d, ii - i); + hc->chan[ch].Zfill += ii - i; + *idxp = ii; + + /* if not all data has been written */ + if (ii != len) { + /* NOTE: fifo is started by the calling function */ + return; + } + + /* if all data has been written, terminate frame */ + if (dch || test_bit(FLG_HDLC, &bch->Flags)) { + /* increment f-counter */ + HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F); + HFC_wait_nodebug(hc); + } + + /* send confirm, since get_net_bframe will not do it with trans */ + if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) + confirm_Bsend(bch); + + /* check for next frame */ + dev_kfree_skb(*sp); + if (bch && get_next_bframe(bch)) { /* hdlc is confirmed here */ + len = (*sp)->len; + goto next_frame; + } + if (dch && get_next_dframe(dch)) { + len = (*sp)->len; + goto next_frame; + } + + /* + * now we have no more data, so in case of transparent, + * we set the last byte in fifo to 'silence' in case we will get + * no more data at all. this prevents sending an undefined value. + */ + if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags)) + HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence); +} + + +/* NOTE: only called if E1 card is in active state */ +static void +hfcmulti_rx(struct hfc_multi *hc, int ch) +{ + int temp; + int Zsize, z1, z2 = 0; /* = 0, to make GCC happy */ + int f1 = 0, f2 = 0; /* = 0, to make GCC happy */ + int again = 0; + struct bchannel *bch; + struct dchannel *dch; + struct sk_buff *skb, **sp = NULL; + int maxlen; + + bch = hc->chan[ch].bch; + dch = hc->chan[ch].dch; + if ((!dch) && (!bch)) + return; + if (dch) { + if (!test_bit(FLG_ACTIVE, &dch->Flags)) + return; + sp = &dch->rx_skb; + maxlen = dch->maxlen; + } else { + if (!test_bit(FLG_ACTIVE, &bch->Flags)) + return; + sp = &bch->rx_skb; + maxlen = bch->maxlen; + } +next_frame: + /* on first AND before getting next valid frame, R_FIFO must be written + to. */ + if (test_bit(HFC_CHIP_B410P, &hc->chip) && + (hc->chan[ch].protocol == ISDN_P_B_RAW) && + (hc->chan[ch].slot_rx < 0) && + (hc->chan[ch].slot_tx < 0)) + HFC_outb_nodebug(hc, R_FIFO, 0x20 | (ch << 1) | 1); + else + HFC_outb_nodebug(hc, R_FIFO, (ch << 1) | 1); + HFC_wait_nodebug(hc); + + /* ignore if rx is off BUT change fifo (above) to start pending TX */ + if (hc->chan[ch].rx_off) + return; + + if (dch || test_bit(FLG_HDLC, &bch->Flags)) { + f1 = HFC_inb_nodebug(hc, A_F1); + while (f1 != (temp = HFC_inb_nodebug(hc, A_F1))) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG + "%s(card %d): reread f1 because %d!=%d\n", + __func__, hc->id + 1, temp, f1); + f1 = temp; /* repeat until F1 is equal */ + } + f2 = HFC_inb_nodebug(hc, A_F2); + } + z1 = HFC_inw_nodebug(hc, A_Z1) - hc->Zmin; + while (z1 != (temp = (HFC_inw_nodebug(hc, A_Z1) - hc->Zmin))) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG "%s(card %d): reread z2 because " + "%d!=%d\n", __func__, hc->id + 1, temp, z2); + z1 = temp; /* repeat until Z1 is equal */ + } + z2 = HFC_inw_nodebug(hc, A_Z2) - hc->Zmin; + Zsize = z1 - z2; + if ((dch || test_bit(FLG_HDLC, &bch->Flags)) && f1 != f2) + /* complete hdlc frame */ + Zsize++; + if (Zsize < 0) + Zsize += hc->Zlen; + /* if buffer is empty */ + if (Zsize <= 0) + return; + + if (*sp == NULL) { + *sp = mI_alloc_skb(maxlen + 3, GFP_ATOMIC); + if (*sp == NULL) { + printk(KERN_DEBUG "%s: No mem for rx_skb\n", + __func__); + return; + } + } + /* show activity */ + hc->activity[hc->chan[ch].port] = 1; + + /* empty fifo with what we have */ + if (dch || test_bit(FLG_HDLC, &bch->Flags)) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG "%s(card %d): fifo(%d) reading %d " + "bytes (z1=%04x, z2=%04x) HDLC %s (f1=%d, f2=%d) " + "got=%d (again %d)\n", __func__, hc->id + 1, ch, + Zsize, z1, z2, (f1 == f2) ? "fragment" : "COMPLETE", + f1, f2, Zsize + (*sp)->len, again); + /* HDLC */ + if ((Zsize + (*sp)->len) > (maxlen + 3)) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG + "%s(card %d): hdlc-frame too large.\n", + __func__, hc->id + 1); + skb_trim(*sp, 0); + HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait_nodebug(hc); + return; + } + + hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize); + + if (f1 != f2) { + /* increment Z2,F2-counter */ + HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_INC_F); + HFC_wait_nodebug(hc); + /* check size */ + if ((*sp)->len < 4) { + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG + "%s(card %d): Frame below minimum " + "size\n", __func__, hc->id + 1); + skb_trim(*sp, 0); + goto next_frame; + } + /* there is at least one complete frame, check crc */ + if ((*sp)->data[(*sp)->len - 1]) { + if (debug & DEBUG_HFCMULTI_CRC) + printk(KERN_DEBUG + "%s: CRC-error\n", __func__); + skb_trim(*sp, 0); + goto next_frame; + } + skb_trim(*sp, (*sp)->len - 3); + if ((*sp)->len < MISDN_COPY_SIZE) { + skb = *sp; + *sp = mI_alloc_skb(skb->len, GFP_ATOMIC); + if (*sp) { + memcpy(skb_put(*sp, skb->len), + skb->data, skb->len); + skb_trim(skb, 0); + } else { + printk(KERN_DEBUG "%s: No mem\n", + __func__); + *sp = skb; + skb = NULL; + } + } else { + skb = NULL; + } + if (debug & DEBUG_HFCMULTI_FIFO) { + printk(KERN_DEBUG "%s(card %d):", + __func__, hc->id + 1); + temp = 0; + while (temp < (*sp)->len) + printk(" %02x", (*sp)->data[temp++]); + printk("\n"); + } + if (dch) + recv_Dchannel(dch); + else + recv_Bchannel(bch, MISDN_ID_ANY); + *sp = skb; + again++; + goto next_frame; + } + /* there is an incomplete frame */ + } else { + /* transparent */ + if (Zsize > skb_tailroom(*sp)) + Zsize = skb_tailroom(*sp); + hc->read_fifo(hc, skb_put(*sp, Zsize), Zsize); + if (((*sp)->len) < MISDN_COPY_SIZE) { + skb = *sp; + *sp = mI_alloc_skb(skb->len, GFP_ATOMIC); + if (*sp) { + memcpy(skb_put(*sp, skb->len), + skb->data, skb->len); + skb_trim(skb, 0); + } else { + printk(KERN_DEBUG "%s: No mem\n", __func__); + *sp = skb; + skb = NULL; + } + } else { + skb = NULL; + } + if (debug & DEBUG_HFCMULTI_FIFO) + printk(KERN_DEBUG + "%s(card %d): fifo(%d) reading %d bytes " + "(z1=%04x, z2=%04x) TRANS\n", + __func__, hc->id + 1, ch, Zsize, z1, z2); + /* only bch is transparent */ + recv_Bchannel(bch, hc->chan[ch].Zfill); + *sp = skb; + } +} + + +/* + * Interrupt handler + */ +static void +signal_state_up(struct dchannel *dch, int info, char *msg) +{ + struct sk_buff *skb; + int id, data = info; + + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG "%s: %s\n", __func__, msg); + + id = TEI_SAPI | (GROUP_TEI << 8); /* manager address */ + + skb = _alloc_mISDN_skb(MPH_INFORMATION_IND, id, sizeof(data), &data, + GFP_ATOMIC); + if (!skb) + return; + recv_Dchannel_skb(dch, skb); +} + +static inline void +handle_timer_irq(struct hfc_multi *hc) +{ + int ch, temp; + struct dchannel *dch; + u_long flags; + + /* process queued resync jobs */ + if (hc->e1_resync) { + /* lock, so e1_resync gets not changed */ + spin_lock_irqsave(&HFClock, flags); + if (hc->e1_resync & 1) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "Enable SYNC_I\n"); + HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC); + /* disable JATT, if RX_SYNC is set */ + if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) + HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX); + } + if (hc->e1_resync & 2) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG "Enable jatt PLL\n"); + HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS); + } + if (hc->e1_resync & 4) { + if (debug & DEBUG_HFCMULTI_PLXSD) + printk(KERN_DEBUG + "Enable QUARTZ for HFC-E1\n"); + /* set jatt to quartz */ + HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC + | V_JATT_OFF); + /* switch to JATT, in case it is not already */ + HFC_outb(hc, R_SYNC_OUT, 0); + } + hc->e1_resync = 0; + spin_unlock_irqrestore(&HFClock, flags); + } + + if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1) + for (ch = 0; ch <= 31; ch++) { + if (hc->created[hc->chan[ch].port]) { + hfcmulti_tx(hc, ch); + /* fifo is started when switching to rx-fifo */ + hfcmulti_rx(hc, ch); + if (hc->chan[ch].dch && + hc->chan[ch].nt_timer > -1) { + dch = hc->chan[ch].dch; + if (!(--hc->chan[ch].nt_timer)) { + schedule_event(dch, + FLG_PHCHANGE); + if (debug & + DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: nt_timer at " + "state %x\n", + __func__, + dch->state); + } + } + } + } + if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) { + dch = hc->chan[hc->dslot].dch; + if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { + /* LOS */ + temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_SIG_LOS; + if (!temp && hc->chan[hc->dslot].los) + signal_state_up(dch, L1_SIGNAL_LOS_ON, + "LOS detected"); + if (temp && !hc->chan[hc->dslot].los) + signal_state_up(dch, L1_SIGNAL_LOS_OFF, + "LOS gone"); + hc->chan[hc->dslot].los = temp; + } + if (test_bit(HFC_CFG_REPORT_AIS, &hc->chan[hc->dslot].cfg)) { + /* AIS */ + temp = HFC_inb_nodebug(hc, R_SYNC_STA) & V_AIS; + if (!temp && hc->chan[hc->dslot].ais) + signal_state_up(dch, L1_SIGNAL_AIS_ON, + "AIS detected"); + if (temp && !hc->chan[hc->dslot].ais) + signal_state_up(dch, L1_SIGNAL_AIS_OFF, + "AIS gone"); + hc->chan[hc->dslot].ais = temp; + } + if (test_bit(HFC_CFG_REPORT_SLIP, &hc->chan[hc->dslot].cfg)) { + /* SLIP */ + temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_RX; + if (!temp && hc->chan[hc->dslot].slip_rx) + signal_state_up(dch, L1_SIGNAL_SLIP_RX, + " bit SLIP detected RX"); + hc->chan[hc->dslot].slip_rx = temp; + temp = HFC_inb_nodebug(hc, R_SLIP) & V_FOSLIP_TX; + if (!temp && hc->chan[hc->dslot].slip_tx) + signal_state_up(dch, L1_SIGNAL_SLIP_TX, + " bit SLIP detected TX"); + hc->chan[hc->dslot].slip_tx = temp; + } + if (test_bit(HFC_CFG_REPORT_RDI, &hc->chan[hc->dslot].cfg)) { + /* RDI */ + temp = HFC_inb_nodebug(hc, R_RX_SL0_0) & V_A; + if (!temp && hc->chan[hc->dslot].rdi) + signal_state_up(dch, L1_SIGNAL_RDI_ON, + "RDI detected"); + if (temp && !hc->chan[hc->dslot].rdi) + signal_state_up(dch, L1_SIGNAL_RDI_OFF, + "RDI gone"); + hc->chan[hc->dslot].rdi = temp; + } + temp = HFC_inb_nodebug(hc, R_JATT_DIR); + switch (hc->chan[hc->dslot].sync) { + case 0: + if ((temp & 0x60) == 0x60) { + if (debug & DEBUG_HFCMULTI_SYNC) + printk(KERN_DEBUG + "%s: (id=%d) E1 now " + "in clock sync\n", + __func__, hc->id); + HFC_outb(hc, R_RX_OFF, + hc->chan[hc->dslot].jitter | V_RX_INIT); + HFC_outb(hc, R_TX_OFF, + hc->chan[hc->dslot].jitter | V_RX_INIT); + hc->chan[hc->dslot].sync = 1; + goto check_framesync; + } + break; + case 1: + if ((temp & 0x60) != 0x60) { + if (debug & DEBUG_HFCMULTI_SYNC) + printk(KERN_DEBUG + "%s: (id=%d) E1 " + "lost clock sync\n", + __func__, hc->id); + hc->chan[hc->dslot].sync = 0; + break; + } + check_framesync: + temp = HFC_inb_nodebug(hc, R_SYNC_STA); + if (temp == 0x27) { + if (debug & DEBUG_HFCMULTI_SYNC) + printk(KERN_DEBUG + "%s: (id=%d) E1 " + "now in frame sync\n", + __func__, hc->id); + hc->chan[hc->dslot].sync = 2; + } + break; + case 2: + if ((temp & 0x60) != 0x60) { + if (debug & DEBUG_HFCMULTI_SYNC) + printk(KERN_DEBUG + "%s: (id=%d) E1 lost " + "clock & frame sync\n", + __func__, hc->id); + hc->chan[hc->dslot].sync = 0; + break; + } + temp = HFC_inb_nodebug(hc, R_SYNC_STA); + if (temp != 0x27) { + if (debug & DEBUG_HFCMULTI_SYNC) + printk(KERN_DEBUG + "%s: (id=%d) E1 " + "lost frame sync\n", + __func__, hc->id); + hc->chan[hc->dslot].sync = 1; + } + break; + } + } + + if (test_bit(HFC_CHIP_WATCHDOG, &hc->chip)) + hfcmulti_watchdog(hc); + + if (hc->leds) + hfcmulti_leds(hc); +} + +static void +ph_state_irq(struct hfc_multi *hc, u_char r_irq_statech) +{ + struct dchannel *dch; + int ch; + int active; + u_char st_status, temp; + + /* state machine */ + for (ch = 0; ch <= 31; ch++) { + if (hc->chan[ch].dch) { + dch = hc->chan[ch].dch; + if (r_irq_statech & 1) { + HFC_outb_nodebug(hc, R_ST_SEL, + hc->chan[ch].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + /* undocumented: status changes during read */ + st_status = HFC_inb_nodebug(hc, A_ST_RD_STATE); + while (st_status != (temp = + HFC_inb_nodebug(hc, A_ST_RD_STATE))) { + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG "%s: reread " + "STATE because %d!=%d\n", + __func__, temp, + st_status); + st_status = temp; /* repeat */ + } + + /* Speech Design TE-sync indication */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip) && + dch->dev.D.protocol == ISDN_P_TE_S0) { + if (st_status & V_FR_SYNC_ST) + hc->syncronized |= + (1 << hc->chan[ch].port); + else + hc->syncronized &= + ~(1 << hc->chan[ch].port); + } + dch->state = st_status & 0x0f; + if (dch->dev.D.protocol == ISDN_P_NT_S0) + active = 3; + else + active = 7; + if (dch->state == active) { + HFC_outb_nodebug(hc, R_FIFO, + (ch << 1) | 1); + HFC_wait_nodebug(hc); + HFC_outb_nodebug(hc, + R_INC_RES_FIFO, V_RES_F); + HFC_wait_nodebug(hc); + dch->tx_idx = 0; + } + schedule_event(dch, FLG_PHCHANGE); + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: S/T newstate %x port %d\n", + __func__, dch->state, + hc->chan[ch].port); + } + r_irq_statech >>= 1; + } + } + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) + plxsd_checksync(hc, 0); +} + +static void +fifo_irq(struct hfc_multi *hc, int block) +{ + int ch, j; + struct dchannel *dch; + struct bchannel *bch; + u_char r_irq_fifo_bl; + + r_irq_fifo_bl = HFC_inb_nodebug(hc, R_IRQ_FIFO_BL0 + block); + j = 0; + while (j < 8) { + ch = (block << 2) + (j >> 1); + dch = hc->chan[ch].dch; + bch = hc->chan[ch].bch; + if (((!dch) && (!bch)) || (!hc->created[hc->chan[ch].port])) { + j += 2; + continue; + } + if (dch && (r_irq_fifo_bl & (1 << j)) && + test_bit(FLG_ACTIVE, &dch->Flags)) { + hfcmulti_tx(hc, ch); + /* start fifo */ + HFC_outb_nodebug(hc, R_FIFO, 0); + HFC_wait_nodebug(hc); + } + if (bch && (r_irq_fifo_bl & (1 << j)) && + test_bit(FLG_ACTIVE, &bch->Flags)) { + hfcmulti_tx(hc, ch); + /* start fifo */ + HFC_outb_nodebug(hc, R_FIFO, 0); + HFC_wait_nodebug(hc); + } + j++; + if (dch && (r_irq_fifo_bl & (1 << j)) && + test_bit(FLG_ACTIVE, &dch->Flags)) { + hfcmulti_rx(hc, ch); + } + if (bch && (r_irq_fifo_bl & (1 << j)) && + test_bit(FLG_ACTIVE, &bch->Flags)) { + hfcmulti_rx(hc, ch); + } + j++; + } +} + +#ifdef IRQ_DEBUG +int irqsem; +#endif +static irqreturn_t +hfcmulti_interrupt(int intno, void *dev_id) +{ +#ifdef IRQCOUNT_DEBUG + static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0, + iq5 = 0, iq6 = 0, iqcnt = 0; +#endif + struct hfc_multi *hc = dev_id; + struct dchannel *dch; + u_char r_irq_statech, status, r_irq_misc, r_irq_oview; + int i; + void __iomem *plx_acc; + u_short wval; + u_char e1_syncsta, temp; + u_long flags; + + if (!hc) { + printk(KERN_ERR "HFC-multi: Spurious interrupt!\n"); + return IRQ_NONE; + } + + spin_lock(&hc->lock); + +#ifdef IRQ_DEBUG + if (irqsem) + printk(KERN_ERR "irq for card %d during irq from " + "card %d, this is no bug.\n", hc->id + 1, irqsem); + irqsem = hc->id + 1; +#endif +#ifdef CONFIG_MISDN_HFCMULTI_8xx + if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk) + goto irq_notforus; +#endif + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + spin_lock_irqsave(&plx_lock, flags); + plx_acc = hc->plx_membase + PLX_INTCSR; + wval = readw(plx_acc); + spin_unlock_irqrestore(&plx_lock, flags); + if (!(wval & PLX_INTCSR_LINTI1_STATUS)) + goto irq_notforus; + } + + status = HFC_inb_nodebug(hc, R_STATUS); + r_irq_statech = HFC_inb_nodebug(hc, R_IRQ_STATECH); +#ifdef IRQCOUNT_DEBUG + if (r_irq_statech) + iq1++; + if (status & V_DTMF_STA) + iq2++; + if (status & V_LOST_STA) + iq3++; + if (status & V_EXT_IRQSTA) + iq4++; + if (status & V_MISC_IRQSTA) + iq5++; + if (status & V_FR_IRQSTA) + iq6++; + if (iqcnt++ > 5000) { + printk(KERN_ERR "iq1:%x iq2:%x iq3:%x iq4:%x iq5:%x iq6:%x\n", + iq1, iq2, iq3, iq4, iq5, iq6); + iqcnt = 0; + } +#endif + + if (!r_irq_statech && + !(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA | + V_MISC_IRQSTA | V_FR_IRQSTA))) { + /* irq is not for us */ + goto irq_notforus; + } + hc->irqcnt++; + if (r_irq_statech) { + if (hc->ctype != HFC_TYPE_E1) + ph_state_irq(hc, r_irq_statech); + } + if (status & V_EXT_IRQSTA) + ; /* external IRQ */ + if (status & V_LOST_STA) { + /* LOST IRQ */ + HFC_outb(hc, R_INC_RES_FIFO, V_RES_LOST); /* clear irq! */ + } + if (status & V_MISC_IRQSTA) { + /* misc IRQ */ + r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC); + r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */ + if (r_irq_misc & V_STA_IRQ) { + if (hc->ctype == HFC_TYPE_E1) { + /* state machine */ + dch = hc->chan[hc->dslot].dch; + e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA); + if (test_bit(HFC_CHIP_PLXSD, &hc->chip) + && hc->e1_getclock) { + if (e1_syncsta & V_FR_SYNC_E1) + hc->syncronized = 1; + else + hc->syncronized = 0; + } + /* undocumented: status changes during read */ + dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA); + while (dch->state != (temp = + HFC_inb_nodebug(hc, R_E1_RD_STA))) { + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG "%s: reread " + "STATE because %d!=%d\n", + __func__, temp, + dch->state); + dch->state = temp; /* repeat */ + } + dch->state = HFC_inb_nodebug(hc, R_E1_RD_STA) + & 0x7; + schedule_event(dch, FLG_PHCHANGE); + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: E1 (id=%d) newstate %x\n", + __func__, hc->id, dch->state); + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) + plxsd_checksync(hc, 0); + } + } + if (r_irq_misc & V_TI_IRQ) { + if (hc->iclock_on) + mISDN_clock_update(hc->iclock, poll, NULL); + handle_timer_irq(hc); + } + + if (r_irq_misc & V_DTMF_IRQ) + hfcmulti_dtmf(hc); + + if (r_irq_misc & V_IRQ_PROC) { + static int irq_proc_cnt; + if (!irq_proc_cnt++) + printk(KERN_DEBUG "%s: got V_IRQ_PROC -" + " this should not happen\n", __func__); + } + + } + if (status & V_FR_IRQSTA) { + /* FIFO IRQ */ + r_irq_oview = HFC_inb_nodebug(hc, R_IRQ_OVIEW); + for (i = 0; i < 8; i++) { + if (r_irq_oview & (1 << i)) + fifo_irq(hc, i); + } + } + +#ifdef IRQ_DEBUG + irqsem = 0; +#endif + spin_unlock(&hc->lock); + return IRQ_HANDLED; + +irq_notforus: +#ifdef IRQ_DEBUG + irqsem = 0; +#endif + spin_unlock(&hc->lock); + return IRQ_NONE; +} + + +/* + * timer callback for D-chan busy resolution. Currently no function + */ + +static void +hfcmulti_dbusy_timer(struct hfc_multi *hc) +{ +} + + +/* + * activate/deactivate hardware for selected channels and mode + * + * configure B-channel with the given protocol + * ch eqals to the HFC-channel (0-31) + * ch is the number of channel (0-4,4-7,8-11,12-15,16-19,20-23,24-27,28-31 + * for S/T, 1-31 for E1) + * the hdlc interrupts will be set/unset + */ +static int +mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, + int bank_tx, int slot_rx, int bank_rx) +{ + int flow_tx = 0, flow_rx = 0, routing = 0; + int oslot_tx, oslot_rx; + int conf; + + if (ch < 0 || ch > 31) + return -EINVAL; + oslot_tx = hc->chan[ch].slot_tx; + oslot_rx = hc->chan[ch].slot_rx; + conf = hc->chan[ch].conf; + + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG + "%s: card %d channel %d protocol %x slot old=%d new=%d " + "bank new=%d (TX) slot old=%d new=%d bank new=%d (RX)\n", + __func__, hc->id, ch, protocol, oslot_tx, slot_tx, + bank_tx, oslot_rx, slot_rx, bank_rx); + + if (oslot_tx >= 0 && slot_tx != oslot_tx) { + /* remove from slot */ + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG "%s: remove from slot %d (TX)\n", + __func__, oslot_tx); + if (hc->slot_owner[oslot_tx << 1] == ch) { + HFC_outb(hc, R_SLOT, oslot_tx << 1); + HFC_outb(hc, A_SL_CFG, 0); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, A_CONF, 0); + hc->slot_owner[oslot_tx << 1] = -1; + } else { + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG + "%s: we are not owner of this tx slot " + "anymore, channel %d is.\n", + __func__, hc->slot_owner[oslot_tx << 1]); + } + } + + if (oslot_rx >= 0 && slot_rx != oslot_rx) { + /* remove from slot */ + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG + "%s: remove from slot %d (RX)\n", + __func__, oslot_rx); + if (hc->slot_owner[(oslot_rx << 1) | 1] == ch) { + HFC_outb(hc, R_SLOT, (oslot_rx << 1) | V_SL_DIR); + HFC_outb(hc, A_SL_CFG, 0); + hc->slot_owner[(oslot_rx << 1) | 1] = -1; + } else { + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG + "%s: we are not owner of this rx slot " + "anymore, channel %d is.\n", + __func__, + hc->slot_owner[(oslot_rx << 1) | 1]); + } + } + + if (slot_tx < 0) { + flow_tx = 0x80; /* FIFO->ST */ + /* disable pcm slot */ + hc->chan[ch].slot_tx = -1; + hc->chan[ch].bank_tx = 0; + } else { + /* set pcm slot */ + if (hc->chan[ch].txpending) + flow_tx = 0x80; /* FIFO->ST */ + else + flow_tx = 0xc0; /* PCM->ST */ + /* put on slot */ + routing = bank_tx ? 0xc0 : 0x80; + if (conf >= 0 || bank_tx > 1) + routing = 0x40; /* loop */ + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG "%s: put channel %d to slot %d bank" + " %d flow %02x routing %02x conf %d (TX)\n", + __func__, ch, slot_tx, bank_tx, + flow_tx, routing, conf); + HFC_outb(hc, R_SLOT, slot_tx << 1); + HFC_outb(hc, A_SL_CFG, (ch << 1) | routing); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, A_CONF, + (conf < 0) ? 0 : (conf | V_CONF_SL)); + hc->slot_owner[slot_tx << 1] = ch; + hc->chan[ch].slot_tx = slot_tx; + hc->chan[ch].bank_tx = bank_tx; + } + if (slot_rx < 0) { + /* disable pcm slot */ + flow_rx = 0x80; /* ST->FIFO */ + hc->chan[ch].slot_rx = -1; + hc->chan[ch].bank_rx = 0; + } else { + /* set pcm slot */ + if (hc->chan[ch].txpending) + flow_rx = 0x80; /* ST->FIFO */ + else + flow_rx = 0xc0; /* ST->(FIFO,PCM) */ + /* put on slot */ + routing = bank_rx ? 0x80 : 0xc0; /* reversed */ + if (conf >= 0 || bank_rx > 1) + routing = 0x40; /* loop */ + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG "%s: put channel %d to slot %d bank" + " %d flow %02x routing %02x conf %d (RX)\n", + __func__, ch, slot_rx, bank_rx, + flow_rx, routing, conf); + HFC_outb(hc, R_SLOT, (slot_rx << 1) | V_SL_DIR); + HFC_outb(hc, A_SL_CFG, (ch << 1) | V_CH_DIR | routing); + hc->slot_owner[(slot_rx << 1) | 1] = ch; + hc->chan[ch].slot_rx = slot_rx; + hc->chan[ch].bank_rx = bank_rx; + } + + switch (protocol) { + case (ISDN_P_NONE): + /* disable TX fifo */ + HFC_outb(hc, R_FIFO, ch << 1); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | V_IFF); + HFC_outb(hc, A_SUBCH_CFG, 0); + HFC_outb(hc, A_IRQ_MSK, 0); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + /* disable RX fifo */ + HFC_outb(hc, R_FIFO, (ch << 1) | 1); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00); + HFC_outb(hc, A_SUBCH_CFG, 0); + HFC_outb(hc, A_IRQ_MSK, 0); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) { + hc->hw.a_st_ctrl0[hc->chan[ch].port] &= + ((ch & 0x3) == 0) ? ~V_B1_EN : ~V_B2_EN; + HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_CTRL0, + hc->hw.a_st_ctrl0[hc->chan[ch].port]); + } + if (hc->chan[ch].bch) { + test_and_clear_bit(FLG_HDLC, &hc->chan[ch].bch->Flags); + test_and_clear_bit(FLG_TRANSPARENT, + &hc->chan[ch].bch->Flags); + } + break; + case (ISDN_P_B_RAW): /* B-channel */ + + if (test_bit(HFC_CHIP_B410P, &hc->chip) && + (hc->chan[ch].slot_rx < 0) && + (hc->chan[ch].slot_tx < 0)) { + + printk(KERN_DEBUG + "Setting B-channel %d to echo cancelable " + "state on PCM slot %d\n", ch, + ((ch / 4) * 8) + ((ch % 4) * 4) + 1); + printk(KERN_DEBUG + "Enabling pass through for channel\n"); + vpm_out(hc, ch, ((ch / 4) * 8) + + ((ch % 4) * 4) + 1, 0x01); + /* rx path */ + /* S/T -> PCM */ + HFC_outb(hc, R_FIFO, (ch << 1)); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF); + HFC_outb(hc, R_SLOT, (((ch / 4) * 8) + + ((ch % 4) * 4) + 1) << 1); + HFC_outb(hc, A_SL_CFG, 0x80 | (ch << 1)); + + /* PCM -> FIFO */ + HFC_outb(hc, R_FIFO, 0x20 | (ch << 1) | 1); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF); + HFC_outb(hc, A_SUBCH_CFG, 0); + HFC_outb(hc, A_IRQ_MSK, 0); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) + + ((ch % 4) * 4) + 1) << 1) | 1); + HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1) | 1); + + /* tx path */ + /* PCM -> S/T */ + HFC_outb(hc, R_FIFO, (ch << 1) | 1); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, 0xc0 | V_HDLC_TRP | V_IFF); + HFC_outb(hc, R_SLOT, ((((ch / 4) * 8) + + ((ch % 4) * 4)) << 1) | 1); + HFC_outb(hc, A_SL_CFG, 0x80 | 0x40 | (ch << 1) | 1); + + /* FIFO -> PCM */ + HFC_outb(hc, R_FIFO, 0x20 | (ch << 1)); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, 0x20 | V_HDLC_TRP | V_IFF); + HFC_outb(hc, A_SUBCH_CFG, 0); + HFC_outb(hc, A_IRQ_MSK, 0); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + /* tx silence */ + HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence); + HFC_outb(hc, R_SLOT, (((ch / 4) * 8) + + ((ch % 4) * 4)) << 1); + HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1)); + } else { + /* enable TX fifo */ + HFC_outb(hc, R_FIFO, ch << 1); + HFC_wait(hc); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 | + V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | + V_HDLC_TRP | V_IFF); + HFC_outb(hc, A_SUBCH_CFG, 0); + HFC_outb(hc, A_IRQ_MSK, 0); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + /* tx silence */ + HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence); + /* enable RX fifo */ + HFC_outb(hc, R_FIFO, (ch << 1) | 1); + HFC_wait(hc); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 | + V_HDLC_TRP); + /* Enable FIFO, no interrupt*/ + else + HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | + V_HDLC_TRP); + HFC_outb(hc, A_SUBCH_CFG, 0); + HFC_outb(hc, A_IRQ_MSK, 0); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + } + if (hc->ctype != HFC_TYPE_E1) { + hc->hw.a_st_ctrl0[hc->chan[ch].port] |= + ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN; + HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_CTRL0, + hc->hw.a_st_ctrl0[hc->chan[ch].port]); + } + if (hc->chan[ch].bch) + test_and_set_bit(FLG_TRANSPARENT, + &hc->chan[ch].bch->Flags); + break; + case (ISDN_P_B_HDLC): /* B-channel */ + case (ISDN_P_TE_S0): /* D-channel */ + case (ISDN_P_NT_S0): + case (ISDN_P_TE_E1): + case (ISDN_P_NT_E1): + /* enable TX fifo */ + HFC_outb(hc, R_FIFO, ch << 1); + HFC_wait(hc); + if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) { + /* E1 or B-channel */ + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04); + HFC_outb(hc, A_SUBCH_CFG, 0); + } else { + /* D-Channel without HDLC fill flags */ + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04 | V_IFF); + HFC_outb(hc, A_SUBCH_CFG, 2); + } + HFC_outb(hc, A_IRQ_MSK, V_IRQ); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + /* enable RX fifo */ + HFC_outb(hc, R_FIFO, (ch << 1) | 1); + HFC_wait(hc); + HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04); + if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) + HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */ + else + HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */ + HFC_outb(hc, A_IRQ_MSK, V_IRQ); + HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait(hc); + if (hc->chan[ch].bch) { + test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags); + if (hc->ctype != HFC_TYPE_E1) { + hc->hw.a_st_ctrl0[hc->chan[ch].port] |= + ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN; + HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_CTRL0, + hc->hw.a_st_ctrl0[hc->chan[ch].port]); + } + } + break; + default: + printk(KERN_DEBUG "%s: protocol not known %x\n", + __func__, protocol); + hc->chan[ch].protocol = ISDN_P_NONE; + return -ENOPROTOOPT; + } + hc->chan[ch].protocol = protocol; + return 0; +} + + +/* + * connect/disconnect PCM + */ + +static void +hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx, + int slot_rx, int bank_rx) +{ + if (slot_tx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) { + /* disable PCM */ + mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0); + return; + } + + /* enable pcm */ + mode_hfcmulti(hc, ch, hc->chan[ch].protocol, slot_tx, bank_tx, + slot_rx, bank_rx); +} + +/* + * set/disable conference + */ + +static void +hfcmulti_conf(struct hfc_multi *hc, int ch, int num) +{ + if (num >= 0 && num <= 7) + hc->chan[ch].conf = num; + else + hc->chan[ch].conf = -1; + mode_hfcmulti(hc, ch, hc->chan[ch].protocol, hc->chan[ch].slot_tx, + hc->chan[ch].bank_tx, hc->chan[ch].slot_rx, + hc->chan[ch].bank_rx); +} + + +/* + * set/disable sample loop + */ + +/* NOTE: this function is experimental and therefore disabled */ + +/* + * Layer 1 callback function + */ +static int +hfcm_l1callback(struct dchannel *dch, u_int cmd) +{ + struct hfc_multi *hc = dch->hw; + u_long flags; + + switch (cmd) { + case INFO3_P8: + case INFO3_P10: + break; + case HW_RESET_REQ: + /* start activation */ + spin_lock_irqsave(&hc->lock, flags); + if (hc->ctype == HFC_TYPE_E1) { + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: HW_RESET_REQ no BRI\n", + __func__); + } else { + HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 3); /* F3 */ + udelay(6); /* wait at least 5,21us */ + HFC_outb(hc, A_ST_WR_STATE, 3); + HFC_outb(hc, A_ST_WR_STATE, 3 | (V_ST_ACT * 3)); + /* activate */ + } + spin_unlock_irqrestore(&hc->lock, flags); + l1_event(dch->l1, HW_POWERUP_IND); + break; + case HW_DEACT_REQ: + /* start deactivation */ + spin_lock_irqsave(&hc->lock, flags); + if (hc->ctype == HFC_TYPE_E1) { + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: HW_DEACT_REQ no BRI\n", + __func__); + } else { + HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2); + /* deactivate */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + hc->syncronized &= + ~(1 << hc->chan[dch->slot].port); + plxsd_checksync(hc, 0); + } + } + skb_queue_purge(&dch->squeue); + if (dch->tx_skb) { + dev_kfree_skb(dch->tx_skb); + dch->tx_skb = NULL; + } + dch->tx_idx = 0; + if (dch->rx_skb) { + dev_kfree_skb(dch->rx_skb); + dch->rx_skb = NULL; + } + test_and_clear_bit(FLG_TX_BUSY, &dch->Flags); + if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags)) + del_timer(&dch->timer); + spin_unlock_irqrestore(&hc->lock, flags); + break; + case HW_POWERUP_REQ: + spin_lock_irqsave(&hc->lock, flags); + if (hc->ctype == HFC_TYPE_E1) { + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: HW_POWERUP_REQ no BRI\n", + __func__); + } else { + HFC_outb(hc, R_ST_SEL, hc->chan[dch->slot].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_WR_STATE, 3 | 0x10); /* activate */ + udelay(6); /* wait at least 5,21us */ + HFC_outb(hc, A_ST_WR_STATE, 3); /* activate */ + } + spin_unlock_irqrestore(&hc->lock, flags); + break; + case PH_ACTIVATE_IND: + test_and_set_bit(FLG_ACTIVE, &dch->Flags); + _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL, + GFP_ATOMIC); + break; + case PH_DEACTIVATE_IND: + test_and_clear_bit(FLG_ACTIVE, &dch->Flags); + _queue_data(&dch->dev.D, cmd, MISDN_ID_ANY, 0, NULL, + GFP_ATOMIC); + break; + default: + if (dch->debug & DEBUG_HW) + printk(KERN_DEBUG "%s: unknown command %x\n", + __func__, cmd); + return -1; + } + return 0; +} + +/* + * Layer2 -> Layer 1 Transfer + */ + +static int +handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb) +{ + struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D); + struct dchannel *dch = container_of(dev, struct dchannel, dev); + struct hfc_multi *hc = dch->hw; + struct mISDNhead *hh = mISDN_HEAD_P(skb); + int ret = -EINVAL; + unsigned int id; + u_long flags; + + switch (hh->prim) { + case PH_DATA_REQ: + if (skb->len < 1) + break; + spin_lock_irqsave(&hc->lock, flags); + ret = dchannel_senddata(dch, skb); + if (ret > 0) { /* direct TX */ + id = hh->id; /* skb can be freed */ + hfcmulti_tx(hc, dch->slot); + ret = 0; + /* start fifo */ + HFC_outb(hc, R_FIFO, 0); + HFC_wait(hc); + spin_unlock_irqrestore(&hc->lock, flags); + queue_ch_frame(ch, PH_DATA_CNF, id, NULL); + } else + spin_unlock_irqrestore(&hc->lock, flags); + return ret; + case PH_ACTIVATE_REQ: + if (dch->dev.D.protocol != ISDN_P_TE_S0) { + spin_lock_irqsave(&hc->lock, flags); + ret = 0; + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: PH_ACTIVATE port %d (0..%d)\n", + __func__, hc->chan[dch->slot].port, + hc->ports - 1); + /* start activation */ + if (hc->ctype == HFC_TYPE_E1) { + ph_state_change(dch); + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: E1 report state %x \n", + __func__, dch->state); + } else { + HFC_outb(hc, R_ST_SEL, + hc->chan[dch->slot].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_WR_STATE, V_ST_LD_STA | 1); + /* G1 */ + udelay(6); /* wait at least 5,21us */ + HFC_outb(hc, A_ST_WR_STATE, 1); + HFC_outb(hc, A_ST_WR_STATE, 1 | + (V_ST_ACT * 3)); /* activate */ + dch->state = 1; + } + spin_unlock_irqrestore(&hc->lock, flags); + } else + ret = l1_event(dch->l1, hh->prim); + break; + case PH_DEACTIVATE_REQ: + test_and_clear_bit(FLG_L2_ACTIVATED, &dch->Flags); + if (dch->dev.D.protocol != ISDN_P_TE_S0) { + spin_lock_irqsave(&hc->lock, flags); + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: PH_DEACTIVATE port %d (0..%d)\n", + __func__, hc->chan[dch->slot].port, + hc->ports - 1); + /* start deactivation */ + if (hc->ctype == HFC_TYPE_E1) { + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: PH_DEACTIVATE no BRI\n", + __func__); + } else { + HFC_outb(hc, R_ST_SEL, + hc->chan[dch->slot].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_WR_STATE, V_ST_ACT * 2); + /* deactivate */ + dch->state = 1; + } + skb_queue_purge(&dch->squeue); + if (dch->tx_skb) { + dev_kfree_skb(dch->tx_skb); + dch->tx_skb = NULL; + } + dch->tx_idx = 0; + if (dch->rx_skb) { + dev_kfree_skb(dch->rx_skb); + dch->rx_skb = NULL; + } + test_and_clear_bit(FLG_TX_BUSY, &dch->Flags); + if (test_and_clear_bit(FLG_BUSY_TIMER, &dch->Flags)) + del_timer(&dch->timer); +#ifdef FIXME + if (test_and_clear_bit(FLG_L1_BUSY, &dch->Flags)) + dchannel_sched_event(&hc->dch, D_CLEARBUSY); +#endif + ret = 0; + spin_unlock_irqrestore(&hc->lock, flags); + } else + ret = l1_event(dch->l1, hh->prim); + break; + } + if (!ret) + dev_kfree_skb(skb); + return ret; +} + +static void +deactivate_bchannel(struct bchannel *bch) +{ + struct hfc_multi *hc = bch->hw; + u_long flags; + + spin_lock_irqsave(&hc->lock, flags); + mISDN_clear_bchannel(bch); + hc->chan[bch->slot].coeff_count = 0; + hc->chan[bch->slot].rx_off = 0; + hc->chan[bch->slot].conf = -1; + mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0); + spin_unlock_irqrestore(&hc->lock, flags); +} + +static int +handle_bmsg(struct mISDNchannel *ch, struct sk_buff *skb) +{ + struct bchannel *bch = container_of(ch, struct bchannel, ch); + struct hfc_multi *hc = bch->hw; + int ret = -EINVAL; + struct mISDNhead *hh = mISDN_HEAD_P(skb); + unsigned int id; + u_long flags; + + switch (hh->prim) { + case PH_DATA_REQ: + if (!skb->len) + break; + spin_lock_irqsave(&hc->lock, flags); + ret = bchannel_senddata(bch, skb); + if (ret > 0) { /* direct TX */ + id = hh->id; /* skb can be freed */ + hfcmulti_tx(hc, bch->slot); + ret = 0; + /* start fifo */ + HFC_outb_nodebug(hc, R_FIFO, 0); + HFC_wait_nodebug(hc); + if (!test_bit(FLG_TRANSPARENT, &bch->Flags)) { + spin_unlock_irqrestore(&hc->lock, flags); + queue_ch_frame(ch, PH_DATA_CNF, id, NULL); + } else + spin_unlock_irqrestore(&hc->lock, flags); + } else + spin_unlock_irqrestore(&hc->lock, flags); + return ret; + case PH_ACTIVATE_REQ: + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: PH_ACTIVATE ch %d (0..32)\n", + __func__, bch->slot); + spin_lock_irqsave(&hc->lock, flags); + /* activate B-channel if not already activated */ + if (!test_and_set_bit(FLG_ACTIVE, &bch->Flags)) { + hc->chan[bch->slot].txpending = 0; + ret = mode_hfcmulti(hc, bch->slot, + ch->protocol, + hc->chan[bch->slot].slot_tx, + hc->chan[bch->slot].bank_tx, + hc->chan[bch->slot].slot_rx, + hc->chan[bch->slot].bank_rx); + if (!ret) { + if (ch->protocol == ISDN_P_B_RAW && !hc->dtmf + && test_bit(HFC_CHIP_DTMF, &hc->chip)) { + /* start decoder */ + hc->dtmf = 1; + if (debug & DEBUG_HFCMULTI_DTMF) + printk(KERN_DEBUG + "%s: start dtmf decoder\n", + __func__); + HFC_outb(hc, R_DTMF, hc->hw.r_dtmf | + V_RST_DTMF); + } + } + } else + ret = 0; + spin_unlock_irqrestore(&hc->lock, flags); + if (!ret) + _queue_data(ch, PH_ACTIVATE_IND, MISDN_ID_ANY, 0, NULL, + GFP_KERNEL); + break; + case PH_CONTROL_REQ: + spin_lock_irqsave(&hc->lock, flags); + switch (hh->id) { + case HFC_SPL_LOOP_ON: /* set sample loop */ + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: HFC_SPL_LOOP_ON (len = %d)\n", + __func__, skb->len); + ret = 0; + break; + case HFC_SPL_LOOP_OFF: /* set silence */ + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HFC_SPL_LOOP_OFF\n", + __func__); + ret = 0; + break; + default: + printk(KERN_ERR + "%s: unknown PH_CONTROL_REQ info %x\n", + __func__, hh->id); + ret = -EINVAL; + } + spin_unlock_irqrestore(&hc->lock, flags); + break; + case PH_DEACTIVATE_REQ: + deactivate_bchannel(bch); /* locked there */ + _queue_data(ch, PH_DEACTIVATE_IND, MISDN_ID_ANY, 0, NULL, + GFP_KERNEL); + ret = 0; + break; + } + if (!ret) + dev_kfree_skb(skb); + return ret; +} + +/* + * bchannel control function + */ +static int +channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq) +{ + int ret = 0; + struct dsp_features *features = + (struct dsp_features *)(*((u_long *)&cq->p1)); + struct hfc_multi *hc = bch->hw; + int slot_tx; + int bank_tx; + int slot_rx; + int bank_rx; + int num; + + switch (cq->op) { + case MISDN_CTRL_GETOP: + cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP + | MISDN_CTRL_RX_OFF | MISDN_CTRL_FILL_EMPTY; + break; + case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */ + hc->chan[bch->slot].rx_off = !!cq->p1; + if (!hc->chan[bch->slot].rx_off) { + /* reset fifo on rx on */ + HFC_outb_nodebug(hc, R_FIFO, (bch->slot << 1) | 1); + HFC_wait_nodebug(hc); + HFC_outb_nodebug(hc, R_INC_RES_FIFO, V_RES_F); + HFC_wait_nodebug(hc); + } + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n", + __func__, bch->nr, hc->chan[bch->slot].rx_off); + break; + case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */ + test_and_set_bit(FLG_FILLEMPTY, &bch->Flags); + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d " + "off=%d)\n", __func__, bch->nr, !!cq->p1); + break; + case MISDN_CTRL_HW_FEATURES: /* fill features structure */ + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HW_FEATURE request\n", + __func__); + /* create confirm */ + features->hfc_id = hc->id; + if (test_bit(HFC_CHIP_DTMF, &hc->chip)) + features->hfc_dtmf = 1; + if (test_bit(HFC_CHIP_CONF, &hc->chip)) + features->hfc_conf = 1; + features->hfc_loops = 0; + if (test_bit(HFC_CHIP_B410P, &hc->chip)) { + features->hfc_echocanhw = 1; + } else { + features->pcm_id = hc->pcm; + features->pcm_slots = hc->slots; + features->pcm_banks = 2; + } + break; + case MISDN_CTRL_HFC_PCM_CONN: /* connect to pcm timeslot (0..N) */ + slot_tx = cq->p1 & 0xff; + bank_tx = cq->p1 >> 8; + slot_rx = cq->p2 & 0xff; + bank_rx = cq->p2 >> 8; + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG + "%s: HFC_PCM_CONN slot %d bank %d (TX) " + "slot %d bank %d (RX)\n", + __func__, slot_tx, bank_tx, + slot_rx, bank_rx); + if (slot_tx < hc->slots && bank_tx <= 2 && + slot_rx < hc->slots && bank_rx <= 2) + hfcmulti_pcm(hc, bch->slot, + slot_tx, bank_tx, slot_rx, bank_rx); + else { + printk(KERN_WARNING + "%s: HFC_PCM_CONN slot %d bank %d (TX) " + "slot %d bank %d (RX) out of range\n", + __func__, slot_tx, bank_tx, + slot_rx, bank_rx); + ret = -EINVAL; + } + break; + case MISDN_CTRL_HFC_PCM_DISC: /* release interface from pcm timeslot */ + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HFC_PCM_DISC\n", + __func__); + hfcmulti_pcm(hc, bch->slot, -1, 0, -1, 0); + break; + case MISDN_CTRL_HFC_CONF_JOIN: /* join conference (0..7) */ + num = cq->p1 & 0xff; + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HFC_CONF_JOIN conf %d\n", + __func__, num); + if (num <= 7) + hfcmulti_conf(hc, bch->slot, num); + else { + printk(KERN_WARNING + "%s: HW_CONF_JOIN conf %d out of range\n", + __func__, num); + ret = -EINVAL; + } + break; + case MISDN_CTRL_HFC_CONF_SPLIT: /* split conference */ + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HFC_CONF_SPLIT\n", __func__); + hfcmulti_conf(hc, bch->slot, -1); + break; + case MISDN_CTRL_HFC_ECHOCAN_ON: + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HFC_ECHOCAN_ON\n", __func__); + if (test_bit(HFC_CHIP_B410P, &hc->chip)) + vpm_echocan_on(hc, bch->slot, cq->p1); + else + ret = -EINVAL; + break; + + case MISDN_CTRL_HFC_ECHOCAN_OFF: + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: HFC_ECHOCAN_OFF\n", + __func__); + if (test_bit(HFC_CHIP_B410P, &hc->chip)) + vpm_echocan_off(hc, bch->slot); + else + ret = -EINVAL; + break; + default: + printk(KERN_WARNING "%s: unknown Op %x\n", + __func__, cq->op); + ret = -EINVAL; + break; + } + return ret; +} + +static int +hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg) +{ + struct bchannel *bch = container_of(ch, struct bchannel, ch); + struct hfc_multi *hc = bch->hw; + int err = -EINVAL; + u_long flags; + + if (bch->debug & DEBUG_HW) + printk(KERN_DEBUG "%s: cmd:%x %p\n", + __func__, cmd, arg); + switch (cmd) { + case CLOSE_CHANNEL: + test_and_clear_bit(FLG_OPEN, &bch->Flags); + if (test_bit(FLG_ACTIVE, &bch->Flags)) + deactivate_bchannel(bch); /* locked there */ + ch->protocol = ISDN_P_NONE; + ch->peer = NULL; + module_put(THIS_MODULE); + err = 0; + break; + case CONTROL_CHANNEL: + spin_lock_irqsave(&hc->lock, flags); + err = channel_bctrl(bch, arg); + spin_unlock_irqrestore(&hc->lock, flags); + break; + default: + printk(KERN_WARNING "%s: unknown prim(%x)\n", + __func__, cmd); + } + return err; +} + +/* + * handle D-channel events + * + * handle state change event + */ +static void +ph_state_change(struct dchannel *dch) +{ + struct hfc_multi *hc; + int ch, i; + + if (!dch) { + printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__); + return; + } + hc = dch->hw; + ch = dch->slot; + + if (hc->ctype == HFC_TYPE_E1) { + if (dch->dev.D.protocol == ISDN_P_TE_E1) { + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: E1 TE (id=%d) newstate %x\n", + __func__, hc->id, dch->state); + } else { + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: E1 NT (id=%d) newstate %x\n", + __func__, hc->id, dch->state); + } + switch (dch->state) { + case (1): + if (hc->e1_state != 1) { + for (i = 1; i <= 31; i++) { + /* reset fifos on e1 activation */ + HFC_outb_nodebug(hc, R_FIFO, + (i << 1) | 1); + HFC_wait_nodebug(hc); + HFC_outb_nodebug(hc, R_INC_RES_FIFO, + V_RES_F); + HFC_wait_nodebug(hc); + } + } + test_and_set_bit(FLG_ACTIVE, &dch->Flags); + _queue_data(&dch->dev.D, PH_ACTIVATE_IND, + MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); + break; + + default: + if (hc->e1_state != 1) + return; + test_and_clear_bit(FLG_ACTIVE, &dch->Flags); + _queue_data(&dch->dev.D, PH_DEACTIVATE_IND, + MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); + } + hc->e1_state = dch->state; + } else { + if (dch->dev.D.protocol == ISDN_P_TE_S0) { + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG + "%s: S/T TE newstate %x\n", + __func__, dch->state); + switch (dch->state) { + case (0): + l1_event(dch->l1, HW_RESET_IND); + break; + case (3): + l1_event(dch->l1, HW_DEACT_IND); + break; + case (5): + case (8): + l1_event(dch->l1, ANYSIGNAL); + break; + case (6): + l1_event(dch->l1, INFO2); + break; + case (7): + l1_event(dch->l1, INFO4_P8); + break; + } + } else { + if (debug & DEBUG_HFCMULTI_STATE) + printk(KERN_DEBUG "%s: S/T NT newstate %x\n", + __func__, dch->state); + switch (dch->state) { + case (2): + if (hc->chan[ch].nt_timer == 0) { + hc->chan[ch].nt_timer = -1; + HFC_outb(hc, R_ST_SEL, + hc->chan[ch].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + HFC_outb(hc, A_ST_WR_STATE, 4 | + V_ST_LD_STA); /* G4 */ + udelay(6); /* wait at least 5,21us */ + HFC_outb(hc, A_ST_WR_STATE, 4); + dch->state = 4; + } else { + /* one extra count for the next event */ + hc->chan[ch].nt_timer = + nt_t1_count[poll_timer] + 1; + HFC_outb(hc, R_ST_SEL, + hc->chan[ch].port); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + /* allow G2 -> G3 transition */ + HFC_outb(hc, A_ST_WR_STATE, 2 | + V_SET_G2_G3); + } + break; + case (1): + hc->chan[ch].nt_timer = -1; + test_and_clear_bit(FLG_ACTIVE, &dch->Flags); + _queue_data(&dch->dev.D, PH_DEACTIVATE_IND, + MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); + break; + case (4): + hc->chan[ch].nt_timer = -1; + break; + case (3): + hc->chan[ch].nt_timer = -1; + test_and_set_bit(FLG_ACTIVE, &dch->Flags); + _queue_data(&dch->dev.D, PH_ACTIVATE_IND, + MISDN_ID_ANY, 0, NULL, GFP_ATOMIC); + break; + } + } + } +} + +/* + * called for card mode init message + */ + +static void +hfcmulti_initmode(struct dchannel *dch) +{ + struct hfc_multi *hc = dch->hw; + u_char a_st_wr_state, r_e1_wr_sta; + int i, pt; + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: entered\n", __func__); + + if (hc->ctype == HFC_TYPE_E1) { + hc->chan[hc->dslot].slot_tx = -1; + hc->chan[hc->dslot].slot_rx = -1; + hc->chan[hc->dslot].conf = -1; + if (hc->dslot) { + mode_hfcmulti(hc, hc->dslot, dch->dev.D.protocol, + -1, 0, -1, 0); + dch->timer.function = (void *) hfcmulti_dbusy_timer; + dch->timer.data = (long) dch; + init_timer(&dch->timer); + } + for (i = 1; i <= 31; i++) { + if (i == hc->dslot) + continue; + hc->chan[i].slot_tx = -1; + hc->chan[i].slot_rx = -1; + hc->chan[i].conf = -1; + mode_hfcmulti(hc, i, ISDN_P_NONE, -1, 0, -1, 0); + } + /* E1 */ + if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { + HFC_outb(hc, R_LOS0, 255); /* 2 ms */ + HFC_outb(hc, R_LOS1, 255); /* 512 ms */ + } + if (test_bit(HFC_CFG_OPTICAL, &hc->chan[hc->dslot].cfg)) { + HFC_outb(hc, R_RX0, 0); + hc->hw.r_tx0 = 0 | V_OUT_EN; + } else { + HFC_outb(hc, R_RX0, 1); + hc->hw.r_tx0 = 1 | V_OUT_EN; + } + hc->hw.r_tx1 = V_ATX | V_NTRI; + HFC_outb(hc, R_TX0, hc->hw.r_tx0); + HFC_outb(hc, R_TX1, hc->hw.r_tx1); + HFC_outb(hc, R_TX_FR0, 0x00); + HFC_outb(hc, R_TX_FR1, 0xf8); + + if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg)) + HFC_outb(hc, R_TX_FR2, V_TX_MF | V_TX_E | V_NEG_E); + + HFC_outb(hc, R_RX_FR0, V_AUTO_RESYNC | V_AUTO_RECO | 0); + + if (test_bit(HFC_CFG_CRC4, &hc->chan[hc->dslot].cfg)) + HFC_outb(hc, R_RX_FR1, V_RX_MF | V_RX_MF_SYNC); + + if (dch->dev.D.protocol == ISDN_P_NT_E1) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: E1 port is NT-mode\n", + __func__); + r_e1_wr_sta = 0; /* G0 */ + hc->e1_getclock = 0; + } else { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: E1 port is TE-mode\n", + __func__); + r_e1_wr_sta = 0; /* F0 */ + hc->e1_getclock = 1; + } + if (test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) + HFC_outb(hc, R_SYNC_OUT, V_SYNC_E1_RX); + else + HFC_outb(hc, R_SYNC_OUT, 0); + if (test_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip)) + hc->e1_getclock = 1; + if (test_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip)) + hc->e1_getclock = 0; + if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { + /* SLAVE (clock master) */ + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: E1 port is clock master " + "(clock from PCM)\n", __func__); + HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | V_PCM_SYNC); + } else { + if (hc->e1_getclock) { + /* MASTER (clock slave) */ + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: E1 port is clock slave " + "(clock to PCM)\n", __func__); + HFC_outb(hc, R_SYNC_CTRL, V_SYNC_OFFS); + } else { + /* MASTER (clock master) */ + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: E1 port is " + "clock master " + "(clock from QUARTZ)\n", + __func__); + HFC_outb(hc, R_SYNC_CTRL, V_EXT_CLK_SYNC | + V_PCM_SYNC | V_JATT_OFF); + HFC_outb(hc, R_SYNC_OUT, 0); + } + } + HFC_outb(hc, R_JATT_ATT, 0x9c); /* undoc register */ + HFC_outb(hc, R_PWM_MD, V_PWM0_MD); + HFC_outb(hc, R_PWM0, 0x50); + HFC_outb(hc, R_PWM1, 0xff); + /* state machine setup */ + HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta | V_E1_LD_STA); + udelay(6); /* wait at least 5,21us */ + HFC_outb(hc, R_E1_WR_STA, r_e1_wr_sta); + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + hc->syncronized = 0; + plxsd_checksync(hc, 0); + } + } else { + i = dch->slot; + hc->chan[i].slot_tx = -1; + hc->chan[i].slot_rx = -1; + hc->chan[i].conf = -1; + mode_hfcmulti(hc, i, dch->dev.D.protocol, -1, 0, -1, 0); + dch->timer.function = (void *)hfcmulti_dbusy_timer; + dch->timer.data = (long) dch; + init_timer(&dch->timer); + hc->chan[i - 2].slot_tx = -1; + hc->chan[i - 2].slot_rx = -1; + hc->chan[i - 2].conf = -1; + mode_hfcmulti(hc, i - 2, ISDN_P_NONE, -1, 0, -1, 0); + hc->chan[i - 1].slot_tx = -1; + hc->chan[i - 1].slot_rx = -1; + hc->chan[i - 1].conf = -1; + mode_hfcmulti(hc, i - 1, ISDN_P_NONE, -1, 0, -1, 0); + /* ST */ + pt = hc->chan[i].port; + /* select interface */ + HFC_outb(hc, R_ST_SEL, pt); + /* undocumented: delay after R_ST_SEL */ + udelay(1); + if (dch->dev.D.protocol == ISDN_P_NT_S0) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: ST port %d is NT-mode\n", + __func__, pt); + /* clock delay */ + HFC_outb(hc, A_ST_CLK_DLY, clockdelay_nt); + a_st_wr_state = 1; /* G1 */ + hc->hw.a_st_ctrl0[pt] = V_ST_MD; + } else { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: ST port %d is TE-mode\n", + __func__, pt); + /* clock delay */ + HFC_outb(hc, A_ST_CLK_DLY, clockdelay_te); + a_st_wr_state = 2; /* F2 */ + hc->hw.a_st_ctrl0[pt] = 0; + } + if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg)) + hc->hw.a_st_ctrl0[pt] |= V_TX_LI; + if (hc->ctype == HFC_TYPE_XHFC) { + hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */; + HFC_outb(hc, 0x35 /* A_ST_CTRL3 */, + 0x7c << 1 /* V_ST_PULSE */); + } + /* line setup */ + HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]); + /* disable E-channel */ + if ((dch->dev.D.protocol == ISDN_P_NT_S0) || + test_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i].cfg)) + HFC_outb(hc, A_ST_CTRL1, V_E_IGNO); + else + HFC_outb(hc, A_ST_CTRL1, 0); + /* enable B-channel receive */ + HFC_outb(hc, A_ST_CTRL2, V_B1_RX_EN | V_B2_RX_EN); + /* state machine setup */ + HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state | V_ST_LD_STA); + udelay(6); /* wait at least 5,21us */ + HFC_outb(hc, A_ST_WR_STATE, a_st_wr_state); + hc->hw.r_sci_msk |= 1 << pt; + /* state machine interrupts */ + HFC_outb(hc, R_SCI_MSK, hc->hw.r_sci_msk); + /* unset sync on port */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + hc->syncronized &= + ~(1 << hc->chan[dch->slot].port); + plxsd_checksync(hc, 0); + } + } + if (debug & DEBUG_HFCMULTI_INIT) + printk("%s: done\n", __func__); +} + + +static int +open_dchannel(struct hfc_multi *hc, struct dchannel *dch, + struct channel_req *rq) +{ + int err = 0; + u_long flags; + + if (debug & DEBUG_HW_OPEN) + printk(KERN_DEBUG "%s: dev(%d) open from %p\n", __func__, + dch->dev.id, __builtin_return_address(0)); + if (rq->protocol == ISDN_P_NONE) + return -EINVAL; + if ((dch->dev.D.protocol != ISDN_P_NONE) && + (dch->dev.D.protocol != rq->protocol)) { + if (debug & DEBUG_HFCMULTI_MODE) + printk(KERN_DEBUG "%s: change protocol %x to %x\n", + __func__, dch->dev.D.protocol, rq->protocol); + } + if ((dch->dev.D.protocol == ISDN_P_TE_S0) && + (rq->protocol != ISDN_P_TE_S0)) + l1_event(dch->l1, CLOSE_CHANNEL); + if (dch->dev.D.protocol != rq->protocol) { + if (rq->protocol == ISDN_P_TE_S0) { + err = create_l1(dch, hfcm_l1callback); + if (err) + return err; + } + dch->dev.D.protocol = rq->protocol; + spin_lock_irqsave(&hc->lock, flags); + hfcmulti_initmode(dch); + spin_unlock_irqrestore(&hc->lock, flags); + } + + if (((rq->protocol == ISDN_P_NT_S0) && (dch->state == 3)) || + ((rq->protocol == ISDN_P_TE_S0) && (dch->state == 7)) || + ((rq->protocol == ISDN_P_NT_E1) && (dch->state == 1)) || + ((rq->protocol == ISDN_P_TE_E1) && (dch->state == 1))) { + _queue_data(&dch->dev.D, PH_ACTIVATE_IND, MISDN_ID_ANY, + 0, NULL, GFP_KERNEL); + } + rq->ch = &dch->dev.D; + if (!try_module_get(THIS_MODULE)) + printk(KERN_WARNING "%s:cannot get module\n", __func__); + return 0; +} + +static int +open_bchannel(struct hfc_multi *hc, struct dchannel *dch, + struct channel_req *rq) +{ + struct bchannel *bch; + int ch; + + if (!test_channelmap(rq->adr.channel, dch->dev.channelmap)) + return -EINVAL; + if (rq->protocol == ISDN_P_NONE) + return -EINVAL; + if (hc->ctype == HFC_TYPE_E1) + ch = rq->adr.channel; + else + ch = (rq->adr.channel - 1) + (dch->slot - 2); + bch = hc->chan[ch].bch; + if (!bch) { + printk(KERN_ERR "%s:internal error ch %d has no bch\n", + __func__, ch); + return -EINVAL; + } + if (test_and_set_bit(FLG_OPEN, &bch->Flags)) + return -EBUSY; /* b-channel can be only open once */ + test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags); + bch->ch.protocol = rq->protocol; + hc->chan[ch].rx_off = 0; + rq->ch = &bch->ch; + if (!try_module_get(THIS_MODULE)) + printk(KERN_WARNING "%s:cannot get module\n", __func__); + return 0; +} + +/* + * device control function + */ +static int +channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq) +{ + struct hfc_multi *hc = dch->hw; + int ret = 0; + int wd_mode, wd_cnt; + + switch (cq->op) { + case MISDN_CTRL_GETOP: + cq->op = MISDN_CTRL_HFC_OP; + break; + case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */ + wd_cnt = cq->p1 & 0xf; + wd_mode = !!(cq->p1 >> 4); + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s" + ", counter 0x%x\n", __func__, + wd_mode ? "AUTO" : "MANUAL", wd_cnt); + /* set the watchdog timer */ + HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4)); + hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0); + if (hc->ctype == HFC_TYPE_XHFC) + hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */; + /* init the watchdog register and reset the counter */ + HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES); + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + /* enable the watchdog output for Speech-Design */ + HFC_outb(hc, R_GPIO_SEL, V_GPIO_SEL7); + HFC_outb(hc, R_GPIO_EN1, V_GPIO_EN15); + HFC_outb(hc, R_GPIO_OUT1, 0); + HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15); + } + break; + case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */ + if (debug & DEBUG_HFCMULTI_MSG) + printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n", + __func__); + HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES); + break; + default: + printk(KERN_WARNING "%s: unknown Op %x\n", + __func__, cq->op); + ret = -EINVAL; + break; + } + return ret; +} + +static int +hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg) +{ + struct mISDNdevice *dev = container_of(ch, struct mISDNdevice, D); + struct dchannel *dch = container_of(dev, struct dchannel, dev); + struct hfc_multi *hc = dch->hw; + struct channel_req *rq; + int err = 0; + u_long flags; + + if (dch->debug & DEBUG_HW) + printk(KERN_DEBUG "%s: cmd:%x %p\n", + __func__, cmd, arg); + switch (cmd) { + case OPEN_CHANNEL: + rq = arg; + switch (rq->protocol) { + case ISDN_P_TE_S0: + case ISDN_P_NT_S0: + if (hc->ctype == HFC_TYPE_E1) { + err = -EINVAL; + break; + } + err = open_dchannel(hc, dch, rq); /* locked there */ + break; + case ISDN_P_TE_E1: + case ISDN_P_NT_E1: + if (hc->ctype != HFC_TYPE_E1) { + err = -EINVAL; + break; + } + err = open_dchannel(hc, dch, rq); /* locked there */ + break; + default: + spin_lock_irqsave(&hc->lock, flags); + err = open_bchannel(hc, dch, rq); + spin_unlock_irqrestore(&hc->lock, flags); + } + break; + case CLOSE_CHANNEL: + if (debug & DEBUG_HW_OPEN) + printk(KERN_DEBUG "%s: dev(%d) close from %p\n", + __func__, dch->dev.id, + __builtin_return_address(0)); + module_put(THIS_MODULE); + break; + case CONTROL_CHANNEL: + spin_lock_irqsave(&hc->lock, flags); + err = channel_dctrl(dch, arg); + spin_unlock_irqrestore(&hc->lock, flags); + break; + default: + if (dch->debug & DEBUG_HW) + printk(KERN_DEBUG "%s: unknown command %x\n", + __func__, cmd); + err = -EINVAL; + } + return err; +} + +static int +clockctl(void *priv, int enable) +{ + struct hfc_multi *hc = priv; + + hc->iclock_on = enable; + return 0; +} + +/* + * initialize the card + */ + +/* + * start timer irq, wait some time and check if we have interrupts. + * if not, reset chip and try again. + */ +static int +init_card(struct hfc_multi *hc) +{ + int err = -EIO; + u_long flags; + void __iomem *plx_acc; + u_long plx_flags; + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: entered\n", __func__); + + spin_lock_irqsave(&hc->lock, flags); + /* set interrupts but leave global interrupt disabled */ + hc->hw.r_irq_ctrl = V_FIFO_IRQ; + disable_hwirq(hc); + spin_unlock_irqrestore(&hc->lock, flags); + + if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED, + "HFC-multi", hc)) { + printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n", + hc->irq); + hc->irq = 0; + return -EIO; + } + + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc = hc->plx_membase + PLX_INTCSR; + writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE), + plx_acc); /* enable PCI & LINT1 irq */ + spin_unlock_irqrestore(&plx_lock, plx_flags); + } + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: IRQ %d count %d\n", + __func__, hc->irq, hc->irqcnt); + err = init_chip(hc); + if (err) + goto error; + /* + * Finally enable IRQ output + * this is only allowed, if an IRQ routine is already + * established for this HFC, so don't do that earlier + */ + spin_lock_irqsave(&hc->lock, flags); + enable_hwirq(hc); + spin_unlock_irqrestore(&hc->lock, flags); + /* printk(KERN_DEBUG "no master irq set!!!\n"); */ + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout((100 * HZ) / 1000); /* Timeout 100ms */ + /* turn IRQ off until chip is completely initialized */ + spin_lock_irqsave(&hc->lock, flags); + disable_hwirq(hc); + spin_unlock_irqrestore(&hc->lock, flags); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: IRQ %d count %d\n", + __func__, hc->irq, hc->irqcnt); + if (hc->irqcnt) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: done\n", __func__); + + return 0; + } + if (test_bit(HFC_CHIP_PCM_SLAVE, &hc->chip)) { + printk(KERN_INFO "ignoring missing interrupts\n"); + return 0; + } + + printk(KERN_ERR "HFC PCI: IRQ(%d) getting no interrupts during init.\n", + hc->irq); + + err = -EIO; + +error: + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + spin_lock_irqsave(&plx_lock, plx_flags); + plx_acc = hc->plx_membase + PLX_INTCSR; + writew(0x00, plx_acc); /*disable IRQs*/ + spin_unlock_irqrestore(&plx_lock, plx_flags); + } + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq); + if (hc->irq) { + free_irq(hc->irq, hc); + hc->irq = 0; + } + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: done (err=%d)\n", __func__, err); + return err; +} + +/* + * find pci device and set it up + */ + +static int +setup_pci(struct hfc_multi *hc, struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct hm_map *m = (struct hm_map *)ent->driver_data; + + printk(KERN_INFO + "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n", + m->vendor_name, m->card_name, m->clock2 ? "double" : "normal"); + + hc->pci_dev = pdev; + if (m->clock2) + test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip); + + if (ent->device == 0xB410) { + test_and_set_bit(HFC_CHIP_B410P, &hc->chip); + test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip); + test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); + hc->slots = 32; + } + + if (hc->pci_dev->irq <= 0) { + printk(KERN_WARNING "HFC-multi: No IRQ for PCI card found.\n"); + return -EIO; + } + if (pci_enable_device(hc->pci_dev)) { + printk(KERN_WARNING "HFC-multi: Error enabling PCI card.\n"); + return -EIO; + } + hc->leds = m->leds; + hc->ledstate = 0xAFFEAFFE; + hc->opticalsupport = m->opticalsupport; + + hc->pci_iobase = 0; + hc->pci_membase = NULL; + hc->plx_membase = NULL; + + /* set memory access methods */ + if (m->io_mode) /* use mode from card config */ + hc->io_mode = m->io_mode; + switch (hc->io_mode) { + case HFC_IO_MODE_PLXSD: + test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip); + hc->slots = 128; /* required */ + hc->HFC_outb = HFC_outb_pcimem; + hc->HFC_inb = HFC_inb_pcimem; + hc->HFC_inw = HFC_inw_pcimem; + hc->HFC_wait = HFC_wait_pcimem; + hc->read_fifo = read_fifo_pcimem; + hc->write_fifo = write_fifo_pcimem; + hc->plx_origmembase = hc->pci_dev->resource[0].start; + /* MEMBASE 1 is PLX PCI Bridge */ + + if (!hc->plx_origmembase) { + printk(KERN_WARNING + "HFC-multi: No IO-Memory for PCI PLX bridge found\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + hc->plx_membase = ioremap(hc->plx_origmembase, 0x80); + if (!hc->plx_membase) { + printk(KERN_WARNING + "HFC-multi: failed to remap plx address space. " + "(internal error)\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + printk(KERN_INFO + "HFC-multi: plx_membase:%#lx plx_origmembase:%#lx\n", + (u_long)hc->plx_membase, hc->plx_origmembase); + + hc->pci_origmembase = hc->pci_dev->resource[2].start; + /* MEMBASE 1 is PLX PCI Bridge */ + if (!hc->pci_origmembase) { + printk(KERN_WARNING + "HFC-multi: No IO-Memory for PCI card found\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + hc->pci_membase = ioremap(hc->pci_origmembase, 0x400); + if (!hc->pci_membase) { + printk(KERN_WARNING "HFC-multi: failed to remap io " + "address space. (internal error)\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + printk(KERN_INFO + "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d HZ %d " + "leds-type %d\n", + hc->id, (u_long)hc->pci_membase, hc->pci_origmembase, + hc->pci_dev->irq, HZ, hc->leds); + pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO); + break; + case HFC_IO_MODE_PCIMEM: + hc->HFC_outb = HFC_outb_pcimem; + hc->HFC_inb = HFC_inb_pcimem; + hc->HFC_inw = HFC_inw_pcimem; + hc->HFC_wait = HFC_wait_pcimem; + hc->read_fifo = read_fifo_pcimem; + hc->write_fifo = write_fifo_pcimem; + hc->pci_origmembase = hc->pci_dev->resource[1].start; + if (!hc->pci_origmembase) { + printk(KERN_WARNING + "HFC-multi: No IO-Memory for PCI card found\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + hc->pci_membase = ioremap(hc->pci_origmembase, 256); + if (!hc->pci_membase) { + printk(KERN_WARNING + "HFC-multi: failed to remap io address space. " + "(internal error)\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ " + "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase, + hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds); + pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO); + break; + case HFC_IO_MODE_REGIO: + hc->HFC_outb = HFC_outb_regio; + hc->HFC_inb = HFC_inb_regio; + hc->HFC_inw = HFC_inw_regio; + hc->HFC_wait = HFC_wait_regio; + hc->read_fifo = read_fifo_regio; + hc->write_fifo = write_fifo_regio; + hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start; + if (!hc->pci_iobase) { + printk(KERN_WARNING + "HFC-multi: No IO for PCI card found\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + if (!request_region(hc->pci_iobase, 8, "hfcmulti")) { + printk(KERN_WARNING "HFC-multi: failed to request " + "address space at 0x%08lx (internal error)\n", + hc->pci_iobase); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + printk(KERN_INFO + "%s %s: defined at IOBASE %#x IRQ %d HZ %d leds-type %d\n", + m->vendor_name, m->card_name, (u_int) hc->pci_iobase, + hc->pci_dev->irq, HZ, hc->leds); + pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_REGIO); + break; + default: + printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); + pci_disable_device(hc->pci_dev); + return -EIO; + } + + pci_set_drvdata(hc->pci_dev, hc); + + /* At this point the needed PCI config is done */ + /* fifos are still not enabled */ + return 0; +} + + +/* + * remove port + */ + +static void +release_port(struct hfc_multi *hc, struct dchannel *dch) +{ + int pt, ci, i = 0; + u_long flags; + struct bchannel *pb; + + ci = dch->slot; + pt = hc->chan[ci].port; + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: entered for port %d\n", + __func__, pt + 1); + + if (pt >= hc->ports) { + printk(KERN_WARNING "%s: ERROR port out of range (%d).\n", + __func__, pt + 1); + return; + } + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: releasing port=%d\n", + __func__, pt + 1); + + if (dch->dev.D.protocol == ISDN_P_TE_S0) + l1_event(dch->l1, CLOSE_CHANNEL); + + hc->chan[ci].dch = NULL; + + if (hc->created[pt]) { + hc->created[pt] = 0; + mISDN_unregister_device(&dch->dev); + } + + spin_lock_irqsave(&hc->lock, flags); + + if (dch->timer.function) { + del_timer(&dch->timer); + dch->timer.function = NULL; + } + + if (hc->ctype == HFC_TYPE_E1) { /* E1 */ + /* remove sync */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + hc->syncronized = 0; + plxsd_checksync(hc, 1); + } + /* free channels */ + for (i = 0; i <= 31; i++) { + if (hc->chan[i].bch) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: free port %d channel %d\n", + __func__, hc->chan[i].port + 1, i); + pb = hc->chan[i].bch; + hc->chan[i].bch = NULL; + spin_unlock_irqrestore(&hc->lock, flags); + mISDN_freebchannel(pb); + kfree(pb); + kfree(hc->chan[i].coeff); + spin_lock_irqsave(&hc->lock, flags); + } + } + } else { + /* remove sync */ + if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { + hc->syncronized &= + ~(1 << hc->chan[ci].port); + plxsd_checksync(hc, 1); + } + /* free channels */ + if (hc->chan[ci - 2].bch) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: free port %d channel %d\n", + __func__, hc->chan[ci - 2].port + 1, + ci - 2); + pb = hc->chan[ci - 2].bch; + hc->chan[ci - 2].bch = NULL; + spin_unlock_irqrestore(&hc->lock, flags); + mISDN_freebchannel(pb); + kfree(pb); + kfree(hc->chan[ci - 2].coeff); + spin_lock_irqsave(&hc->lock, flags); + } + if (hc->chan[ci - 1].bch) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: free port %d channel %d\n", + __func__, hc->chan[ci - 1].port + 1, + ci - 1); + pb = hc->chan[ci - 1].bch; + hc->chan[ci - 1].bch = NULL; + spin_unlock_irqrestore(&hc->lock, flags); + mISDN_freebchannel(pb); + kfree(pb); + kfree(hc->chan[ci - 1].coeff); + spin_lock_irqsave(&hc->lock, flags); + } + } + + spin_unlock_irqrestore(&hc->lock, flags); + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: free port %d channel D\n", __func__, pt); + mISDN_freedchannel(dch); + kfree(dch); + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: done!\n", __func__); +} + +static void +release_card(struct hfc_multi *hc) +{ + u_long flags; + int ch; + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: release card (%d) entered\n", + __func__, hc->id); + + /* unregister clock source */ + if (hc->iclock) + mISDN_unregister_clock(hc->iclock); + + /* disable irq */ + spin_lock_irqsave(&hc->lock, flags); + disable_hwirq(hc); + spin_unlock_irqrestore(&hc->lock, flags); + udelay(1000); + + /* dimm leds */ + if (hc->leds) + hfcmulti_leds(hc); + + /* disable D-channels & B-channels */ + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: disable all channels (d and b)\n", + __func__); + for (ch = 0; ch <= 31; ch++) { + if (hc->chan[ch].dch) + release_port(hc, hc->chan[ch].dch); + } + + /* release hardware & irq */ + if (hc->irq) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: free irq %d\n", + __func__, hc->irq); + free_irq(hc->irq, hc); + hc->irq = 0; + + } + release_io_hfcmulti(hc); + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: remove instance from list\n", + __func__); + list_del(&hc->list); + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: delete instance\n", __func__); + if (hc == syncmaster) + syncmaster = NULL; + kfree(hc); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: card successfully removed\n", + __func__); +} + +static int +init_e1_port(struct hfc_multi *hc, struct hm_map *m) +{ + struct dchannel *dch; + struct bchannel *bch; + int ch, ret = 0; + char name[MISDN_MAX_IDLEN]; + + dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL); + if (!dch) + return -ENOMEM; + dch->debug = debug; + mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change); + dch->hw = hc; + dch->dev.Dprotocols = (1 << ISDN_P_TE_E1) | (1 << ISDN_P_NT_E1); + dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | + (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); + dch->dev.D.send = handle_dmsg; + dch->dev.D.ctrl = hfcm_dctrl; + dch->dev.nrbchan = (hc->dslot) ? 30 : 31; + dch->slot = hc->dslot; + hc->chan[hc->dslot].dch = dch; + hc->chan[hc->dslot].port = 0; + hc->chan[hc->dslot].nt_timer = -1; + for (ch = 1; ch <= 31; ch++) { + if (ch == hc->dslot) /* skip dchannel */ + continue; + bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL); + if (!bch) { + printk(KERN_ERR "%s: no memory for bchannel\n", + __func__); + ret = -ENOMEM; + goto free_chan; + } + hc->chan[ch].coeff = kzalloc(512, GFP_KERNEL); + if (!hc->chan[ch].coeff) { + printk(KERN_ERR "%s: no memory for coeffs\n", + __func__); + ret = -ENOMEM; + kfree(bch); + goto free_chan; + } + bch->nr = ch; + bch->slot = ch; + bch->debug = debug; + mISDN_initbchannel(bch, MAX_DATA_MEM); + bch->hw = hc; + bch->ch.send = handle_bmsg; + bch->ch.ctrl = hfcm_bctrl; + bch->ch.nr = ch; + list_add(&bch->ch.list, &dch->dev.bchannels); + hc->chan[ch].bch = bch; + hc->chan[ch].port = 0; + set_channelmap(bch->nr, dch->dev.channelmap); + } + /* set optical line type */ + if (port[Port_cnt] & 0x001) { + if (!m->opticalsupport) { + printk(KERN_INFO + "This board has no optical " + "support\n"); + } else { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PORT set optical " + "interfacs: card(%d) " + "port(%d)\n", + __func__, + HFC_cnt + 1, 1); + test_and_set_bit(HFC_CFG_OPTICAL, + &hc->chan[hc->dslot].cfg); + } + } + /* set LOS report */ + if (port[Port_cnt] & 0x004) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT set " + "LOS report: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CFG_REPORT_LOS, + &hc->chan[hc->dslot].cfg); + } + /* set AIS report */ + if (port[Port_cnt] & 0x008) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT set " + "AIS report: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CFG_REPORT_AIS, + &hc->chan[hc->dslot].cfg); + } + /* set SLIP report */ + if (port[Port_cnt] & 0x010) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PORT set SLIP report: " + "card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CFG_REPORT_SLIP, + &hc->chan[hc->dslot].cfg); + } + /* set RDI report */ + if (port[Port_cnt] & 0x020) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PORT set RDI report: " + "card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CFG_REPORT_RDI, + &hc->chan[hc->dslot].cfg); + } + /* set CRC-4 Mode */ + if (!(port[Port_cnt] & 0x100)) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT turn on CRC4 report:" + " card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CFG_CRC4, + &hc->chan[hc->dslot].cfg); + } else { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT turn off CRC4" + " report: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + } + /* set forced clock */ + if (port[Port_cnt] & 0x0200) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT force getting clock from " + "E1: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CHIP_E1CLOCK_GET, &hc->chip); + } else + if (port[Port_cnt] & 0x0400) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT force putting clock to " + "E1: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CHIP_E1CLOCK_PUT, &hc->chip); + } + /* set JATT PLL */ + if (port[Port_cnt] & 0x0800) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: PORT disable JATT PLL on " + "E1: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, 1); + test_and_set_bit(HFC_CHIP_RX_SYNC, &hc->chip); + } + /* set elastic jitter buffer */ + if (port[Port_cnt] & 0x3000) { + hc->chan[hc->dslot].jitter = (port[Port_cnt]>>12) & 0x3; + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PORT set elastic " + "buffer to %d: card(%d) port(%d)\n", + __func__, hc->chan[hc->dslot].jitter, + HFC_cnt + 1, 1); + } else + hc->chan[hc->dslot].jitter = 2; /* default */ + snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1); + ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); + if (ret) + goto free_chan; + hc->created[0] = 1; + return ret; +free_chan: + release_port(hc, dch); + return ret; +} + +static int +init_multi_port(struct hfc_multi *hc, int pt) +{ + struct dchannel *dch; + struct bchannel *bch; + int ch, i, ret = 0; + char name[MISDN_MAX_IDLEN]; + + dch = kzalloc(sizeof(struct dchannel), GFP_KERNEL); + if (!dch) + return -ENOMEM; + dch->debug = debug; + mISDN_initdchannel(dch, MAX_DFRAME_LEN_L1, ph_state_change); + dch->hw = hc; + dch->dev.Dprotocols = (1 << ISDN_P_TE_S0) | (1 << ISDN_P_NT_S0); + dch->dev.Bprotocols = (1 << (ISDN_P_B_RAW & ISDN_P_B_MASK)) | + (1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK)); + dch->dev.D.send = handle_dmsg; + dch->dev.D.ctrl = hfcm_dctrl; + dch->dev.nrbchan = 2; + i = pt << 2; + dch->slot = i + 2; + hc->chan[i + 2].dch = dch; + hc->chan[i + 2].port = pt; + hc->chan[i + 2].nt_timer = -1; + for (ch = 0; ch < dch->dev.nrbchan; ch++) { + bch = kzalloc(sizeof(struct bchannel), GFP_KERNEL); + if (!bch) { + printk(KERN_ERR "%s: no memory for bchannel\n", + __func__); + ret = -ENOMEM; + goto free_chan; + } + hc->chan[i + ch].coeff = kzalloc(512, GFP_KERNEL); + if (!hc->chan[i + ch].coeff) { + printk(KERN_ERR "%s: no memory for coeffs\n", + __func__); + ret = -ENOMEM; + kfree(bch); + goto free_chan; + } + bch->nr = ch + 1; + bch->slot = i + ch; + bch->debug = debug; + mISDN_initbchannel(bch, MAX_DATA_MEM); + bch->hw = hc; + bch->ch.send = handle_bmsg; + bch->ch.ctrl = hfcm_bctrl; + bch->ch.nr = ch + 1; + list_add(&bch->ch.list, &dch->dev.bchannels); + hc->chan[i + ch].bch = bch; + hc->chan[i + ch].port = pt; + set_channelmap(bch->nr, dch->dev.channelmap); + } + /* set master clock */ + if (port[Port_cnt] & 0x001) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PROTOCOL set master clock: " + "card(%d) port(%d)\n", + __func__, HFC_cnt + 1, pt + 1); + if (dch->dev.D.protocol != ISDN_P_TE_S0) { + printk(KERN_ERR "Error: Master clock " + "for port(%d) of card(%d) is only" + " possible with TE-mode\n", + pt + 1, HFC_cnt + 1); + ret = -EINVAL; + goto free_chan; + } + if (hc->masterclk >= 0) { + printk(KERN_ERR "Error: Master clock " + "for port(%d) of card(%d) already " + "defined for port(%d)\n", + pt + 1, HFC_cnt + 1, hc->masterclk + 1); + ret = -EINVAL; + goto free_chan; + } + hc->masterclk = pt; + } + /* set transmitter line to non capacitive */ + if (port[Port_cnt] & 0x002) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PROTOCOL set non capacitive " + "transmitter: card(%d) port(%d)\n", + __func__, HFC_cnt + 1, pt + 1); + test_and_set_bit(HFC_CFG_NONCAP_TX, + &hc->chan[i + 2].cfg); + } + /* disable E-channel */ + if (port[Port_cnt] & 0x004) { + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: PROTOCOL disable E-channel: " + "card(%d) port(%d)\n", + __func__, HFC_cnt + 1, pt + 1); + test_and_set_bit(HFC_CFG_DIS_ECHANNEL, + &hc->chan[i + 2].cfg); + } + if (hc->ctype == HFC_TYPE_XHFC) { + snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d", + HFC_cnt + 1, pt + 1); + ret = mISDN_register_device(&dch->dev, NULL, name); + } else { + snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d", + hc->ctype, HFC_cnt + 1, pt + 1); + ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); + } + if (ret) + goto free_chan; + hc->created[pt] = 1; + return ret; +free_chan: + release_port(hc, dch); + return ret; +} + +static int +hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int ret_err = 0; + int pt; + struct hfc_multi *hc; + u_long flags; + u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */ + int i; + + if (HFC_cnt >= MAX_CARDS) { + printk(KERN_ERR "too many cards (max=%d).\n", + MAX_CARDS); + return -EINVAL; + } + if ((type[HFC_cnt] & 0xff) && (type[HFC_cnt] & 0xff) != m->type) { + printk(KERN_WARNING "HFC-MULTI: Card '%s:%s' type %d found but " + "type[%d] %d was supplied as module parameter\n", + m->vendor_name, m->card_name, m->type, HFC_cnt, + type[HFC_cnt] & 0xff); + printk(KERN_WARNING "HFC-MULTI: Load module without parameters " + "first, to see cards and their types."); + return -EINVAL; + } + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: Registering %s:%s chip type %d (0x%x)\n", + __func__, m->vendor_name, m->card_name, m->type, + type[HFC_cnt]); + + /* allocate card+fifo structure */ + hc = kzalloc(sizeof(struct hfc_multi), GFP_KERNEL); + if (!hc) { + printk(KERN_ERR "No kmem for HFC-Multi card\n"); + return -ENOMEM; + } + spin_lock_init(&hc->lock); + hc->mtyp = m; + hc->ctype = m->type; + hc->ports = m->ports; + hc->id = HFC_cnt; + hc->pcm = pcm[HFC_cnt]; + hc->io_mode = iomode[HFC_cnt]; + if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) { + hc->dslot = 0; + printk(KERN_INFO "HFC-E1 card has disabled D-channel, but " + "31 B-channels\n"); + } + if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 + && hc->ctype == HFC_TYPE_E1) { + hc->dslot = dslot[HFC_cnt]; + printk(KERN_INFO "HFC-E1 card has alternating D-channel on " + "time slot %d\n", dslot[HFC_cnt]); + } else + hc->dslot = 16; + + /* set chip specific features */ + hc->masterclk = -1; + if (type[HFC_cnt] & 0x100) { + test_and_set_bit(HFC_CHIP_ULAW, &hc->chip); + hc->silence = 0xff; /* ulaw silence */ + } else + hc->silence = 0x2a; /* alaw silence */ + if ((poll >> 1) > sizeof(hc->silence_data)) { + printk(KERN_ERR "HFCMULTI error: silence_data too small, " + "please fix\n"); + return -EINVAL; + } + for (i = 0; i < (poll >> 1); i++) + hc->silence_data[i] = hc->silence; + + if (hc->ctype != HFC_TYPE_XHFC) { + if (!(type[HFC_cnt] & 0x200)) + test_and_set_bit(HFC_CHIP_DTMF, &hc->chip); + test_and_set_bit(HFC_CHIP_CONF, &hc->chip); + } + + if (type[HFC_cnt] & 0x800) + test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); + if (type[HFC_cnt] & 0x1000) { + test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip); + test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); + } + if (type[HFC_cnt] & 0x4000) + test_and_set_bit(HFC_CHIP_EXRAM_128, &hc->chip); + if (type[HFC_cnt] & 0x8000) + test_and_set_bit(HFC_CHIP_EXRAM_512, &hc->chip); + hc->slots = 32; + if (type[HFC_cnt] & 0x10000) + hc->slots = 64; + if (type[HFC_cnt] & 0x20000) + hc->slots = 128; + if (type[HFC_cnt] & 0x80000) { + test_and_set_bit(HFC_CHIP_WATCHDOG, &hc->chip); + hc->wdcount = 0; + hc->wdbyte = V_GPIO_OUT2; + printk(KERN_NOTICE "Watchdog enabled\n"); + } + + if (pdev && ent) + /* setup pci, hc->slots may change due to PLXSD */ + ret_err = setup_pci(hc, pdev, ent); + else +#ifdef CONFIG_MISDN_HFCMULTI_8xx + ret_err = setup_embedded(hc, m); +#else + { + printk(KERN_WARNING "Embedded IO Mode not selected\n"); + ret_err = -EIO; + } +#endif + if (ret_err) { + if (hc == syncmaster) + syncmaster = NULL; + kfree(hc); + return ret_err; + } + + hc->HFC_outb_nodebug = hc->HFC_outb; + hc->HFC_inb_nodebug = hc->HFC_inb; + hc->HFC_inw_nodebug = hc->HFC_inw; + hc->HFC_wait_nodebug = hc->HFC_wait; +#ifdef HFC_REGISTER_DEBUG + hc->HFC_outb = HFC_outb_debug; + hc->HFC_inb = HFC_inb_debug; + hc->HFC_inw = HFC_inw_debug; + hc->HFC_wait = HFC_wait_debug; +#endif + /* create channels */ + for (pt = 0; pt < hc->ports; pt++) { + if (Port_cnt >= MAX_PORTS) { + printk(KERN_ERR "too many ports (max=%d).\n", + MAX_PORTS); + ret_err = -EINVAL; + goto free_card; + } + if (hc->ctype == HFC_TYPE_E1) + ret_err = init_e1_port(hc, m); + else + ret_err = init_multi_port(hc, pt); + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG + "%s: Registering D-channel, card(%d) port(%d)" + "result %d\n", + __func__, HFC_cnt + 1, pt, ret_err); + + if (ret_err) { + while (pt) { /* release already registered ports */ + pt--; + release_port(hc, hc->chan[(pt << 2) + 2].dch); + } + goto free_card; + } + Port_cnt++; + } + + /* disp switches */ + switch (m->dip_type) { + case DIP_4S: + /* + * Get DIP setting for beroNet 1S/2S/4S cards + * DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) + + * GPI 19/23 (R_GPI_IN2)) + */ + dips = ((~HFC_inb(hc, R_GPIO_IN1) & 0xE0) >> 5) | + ((~HFC_inb(hc, R_GPI_IN2) & 0x80) >> 3) | + (~HFC_inb(hc, R_GPI_IN2) & 0x08); + + /* Port mode (TE/NT) jumpers */ + pmj = ((HFC_inb(hc, R_GPI_IN3) >> 4) & 0xf); + + if (test_bit(HFC_CHIP_B410P, &hc->chip)) + pmj = ~pmj & 0xf; + + printk(KERN_INFO "%s: %s DIPs(0x%x) jumpers(0x%x)\n", + m->vendor_name, m->card_name, dips, pmj); + break; + case DIP_8S: + /* + * Get DIP Setting for beroNet 8S0+ cards + * Enable PCI auxbridge function + */ + HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK); + /* prepare access to auxport */ + outw(0x4000, hc->pci_iobase + 4); + /* + * some dummy reads are required to + * read valid DIP switch data + */ + dips = inb(hc->pci_iobase); + dips = inb(hc->pci_iobase); + dips = inb(hc->pci_iobase); + dips = ~inb(hc->pci_iobase) & 0x3F; + outw(0x0, hc->pci_iobase + 4); + /* disable PCI auxbridge function */ + HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK); + printk(KERN_INFO "%s: %s DIPs(0x%x)\n", + m->vendor_name, m->card_name, dips); + break; + case DIP_E1: + /* + * get DIP Setting for beroNet E1 cards + * DIP Setting: collect GPI 4/5/6/7 (R_GPI_IN0) + */ + dips = (~HFC_inb(hc, R_GPI_IN0) & 0xF0) >> 4; + printk(KERN_INFO "%s: %s DIPs(0x%x)\n", + m->vendor_name, m->card_name, dips); + break; + } + + /* add to list */ + spin_lock_irqsave(&HFClock, flags); + list_add_tail(&hc->list, &HFClist); + spin_unlock_irqrestore(&HFClock, flags); + + /* use as clock source */ + if (clock == HFC_cnt + 1) + hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc); + + /* initialize hardware */ + hc->irq = (m->irq) ? : hc->pci_dev->irq; + ret_err = init_card(hc); + if (ret_err) { + printk(KERN_ERR "init card returns %d\n", ret_err); + release_card(hc); + return ret_err; + } + + /* start IRQ and return */ + spin_lock_irqsave(&hc->lock, flags); + enable_hwirq(hc); + spin_unlock_irqrestore(&hc->lock, flags); + return 0; + +free_card: + release_io_hfcmulti(hc); + if (hc == syncmaster) + syncmaster = NULL; + kfree(hc); + return ret_err; +} + +static void __devexit hfc_remove_pci(struct pci_dev *pdev) +{ + struct hfc_multi *card = pci_get_drvdata(pdev); + u_long flags; + + if (debug) + printk(KERN_INFO "removing hfc_multi card vendor:%x " + "device:%x subvendor:%x subdevice:%x\n", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device); + + if (card) { + spin_lock_irqsave(&HFClock, flags); + release_card(card); + spin_unlock_irqrestore(&HFClock, flags); + } else { + if (debug) + printk(KERN_DEBUG "%s: drvdata already removed\n", + __func__); + } +} + +#define VENDOR_CCD "Cologne Chip AG" +#define VENDOR_BN "beroNet GmbH" +#define VENDOR_DIG "Digium Inc." +#define VENDOR_JH "Junghanns.NET GmbH" +#define VENDOR_PRIM "PrimuX" + +static const struct hm_map hfcm_map[] = { + /*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0}, + /*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, + /*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, + /*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, + /*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0}, + /*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0}, + /*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, + /*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0}, + /*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0}, + /*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0}, + /*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0}, + /*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0}, + + /*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0}, + /*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S, + HFC_IO_MODE_REGIO, 0}, + /*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0}, + /*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0}, + + /*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0}, + /*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0}, + /*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0}, + + /*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, + /*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0}, + /*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, + /*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, + + /*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0}, + /*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0}, + /*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0}, + + /*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0, + HFC_IO_MODE_PLXSD, 0}, + /*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0, + HFC_IO_MODE_PLXSD, 0}, + /*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0}, + /*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0}, + /*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0}, + /*31*/ {VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0, + HFC_IO_MODE_EMBSD, XHFC_IRQ}, + /*32*/ {VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0}, + /*33*/ {VENDOR_BN, "HFC-2S Beronet Card PCIe", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, + /*34*/ {VENDOR_BN, "HFC-4S Beronet Card PCIe", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, +}; + +#undef H +#define H(x) ((unsigned long)&hfcm_map[x]) +static struct pci_device_id hfmultipci_ids[] __devinitdata = { + + /* Cards with HFC-4S Chip */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN1SM, 0, 0, H(0)}, /* BN1S mini PCI */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN2S, 0, 0, H(1)}, /* BN2S */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN2SM, 0, 0, H(2)}, /* BN2S mini PCI */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN4S, 0, 0, H(3)}, /* BN4S */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN4SM, 0, 0, H(4)}, /* BN4S mini PCI */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_DEVICE_ID_CCD_HFC4S, 0, 0, H(5)}, /* Old Eval */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_IOB4ST, 0, 0, H(6)}, /* IOB4ST */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_HFC4S, 0, 0, H(7)}, /* 4S */ + { PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, + PCI_VENDOR_ID_DIGIUM, PCI_DEVICE_ID_DIGIUM_HFC4S, 0, 0, H(8)}, + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_SWYX4S, 0, 0, H(9)}, /* 4S Swyx */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_JH4S20, 0, 0, H(10)}, + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_PMX2S, 0, 0, H(11)}, /* Primux */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + 0xb761, 0, 0, H(33)}, /* BN2S PCIe */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD, + 0xb762, 0, 0, H(34)}, /* BN4S PCIe */ + + /* Cards with HFC-8S Chip */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN8S, 0, 0, H(12)}, /* BN8S */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BN8SP, 0, 0, H(13)}, /* BN8S+ */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_IOB8ST_1, 0, 0, H(17)}, /* IOB8ST */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_JH8S, 0, 0, H(32)}, /* Junganns 8S */ + + + /* Cards with HFC-E1 Chip */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BNE1, 0, 0, H(19)}, /* BNE1 */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BNE1M, 0, 0, H(20)}, /* BNE1 mini PCI */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BNE1DP, 0, 0, H(21)}, /* BNE1 + (Dual) */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_BNE1D, 0, 0, H(22)}, /* BNE1 (Dual) */ + + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_DEVICE_ID_CCD_HFCE1, 0, 0, H(23)}, /* Old Eval */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_IOB1E1, 0, 0, H(24)}, /* IOB1E1 */ + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_HFCE1, 0, 0, H(25)}, /* E1 */ + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */ + + { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD, + PCI_SUBDEVICE_ID_CCD_JHSE1, 0, 0, H(25)}, /* Junghanns E1 */ + + { PCI_VDEVICE(CCD, PCI_DEVICE_ID_CCD_HFC4S), 0 }, + { PCI_VDEVICE(CCD, PCI_DEVICE_ID_CCD_HFC8S), 0 }, + { PCI_VDEVICE(CCD, PCI_DEVICE_ID_CCD_HFCE1), 0 }, + {0, } +}; +#undef H + +MODULE_DEVICE_TABLE(pci, hfmultipci_ids); + +static int +hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct hm_map *m = (struct hm_map *)ent->driver_data; + int ret; + + if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && ( + ent->device == PCI_DEVICE_ID_CCD_HFC4S || + ent->device == PCI_DEVICE_ID_CCD_HFC8S || + ent->device == PCI_DEVICE_ID_CCD_HFCE1)) { + printk(KERN_ERR + "Unknown HFC multiport controller (vendor:%04x device:%04x " + "subvendor:%04x subdevice:%04x)\n", pdev->vendor, + pdev->device, pdev->subsystem_vendor, + pdev->subsystem_device); + printk(KERN_ERR + "Please contact the driver maintainer for support.\n"); + return -ENODEV; + } + ret = hfcmulti_init(m, pdev, ent); + if (ret) + return ret; + HFC_cnt++; + printk(KERN_INFO "%d devices registered\n", HFC_cnt); + return 0; +} + +static struct pci_driver hfcmultipci_driver = { + .name = "hfc_multi", + .probe = hfcmulti_probe, + .remove = __devexit_p(hfc_remove_pci), + .id_table = hfmultipci_ids, +}; + +static void __exit +HFCmulti_cleanup(void) +{ + struct hfc_multi *card, *next; + + /* get rid of all devices of this driver */ + list_for_each_entry_safe(card, next, &HFClist, list) + release_card(card); + pci_unregister_driver(&hfcmultipci_driver); +} + +static int __init +HFCmulti_init(void) +{ + int err; + int i, xhfc = 0; + struct hm_map m; + + printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION); + +#ifdef IRQ_DEBUG + printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__); +#endif + + spin_lock_init(&HFClock); + spin_lock_init(&plx_lock); + + if (debug & DEBUG_HFCMULTI_INIT) + printk(KERN_DEBUG "%s: init entered\n", __func__); + + switch (poll) { + case 0: + poll_timer = 6; + poll = 128; + break; + case 8: + poll_timer = 2; + break; + case 16: + poll_timer = 3; + break; + case 32: + poll_timer = 4; + break; + case 64: + poll_timer = 5; + break; + case 128: + poll_timer = 6; + break; + case 256: + poll_timer = 7; + break; + default: + printk(KERN_ERR + "%s: Wrong poll value (%d).\n", __func__, poll); + err = -EINVAL; + return err; + + } + + if (!clock) + clock = 1; + + /* Register the embedded devices. + * This should be done before the PCI cards registration */ + switch (hwid) { + case HWID_MINIP4: + xhfc = 1; + m = hfcm_map[31]; + break; + case HWID_MINIP8: + xhfc = 2; + m = hfcm_map[31]; + break; + case HWID_MINIP16: + xhfc = 4; + m = hfcm_map[31]; + break; + default: + xhfc = 0; + } + + for (i = 0; i < xhfc; ++i) { + err = hfcmulti_init(&m, NULL, NULL); + if (err) { + printk(KERN_ERR "error registering embedded driver: " + "%x\n", err); + return err; + } + HFC_cnt++; + printk(KERN_INFO "%d devices registered\n", HFC_cnt); + } + + /* Register the PCI cards */ + err = pci_register_driver(&hfcmultipci_driver); + if (err < 0) { + printk(KERN_ERR "error registering pci driver: %x\n", err); + return err; + } + + return 0; +} + + +module_init(HFCmulti_init); +module_exit(HFCmulti_cleanup); |