1 files changed, 47 insertions, 0 deletions
diff --git a/drivers/input/sensor/kxte9_gsensor/readme.txt b/drivers/input/sensor/kxte9_gsensor/readme.txt
new file mode 100755
index 00000000..e4653a08
--- /dev/null
+++ b/drivers/input/sensor/kxte9_gsensor/readme.txt
@@ -0,0 +1,47 @@
+The back of WM3445 MID
+ ______________
+| +z           |
+|   \       @  |
+|    \         |
+|      ---- +y |
+|     |        |
+|     |        |
+|     +x       |
+|______________|
+(KXTE9-2050 Accelerometer)
+
+wmt.io.gsensor
+Configure G-Sensor for Enable/Disable,X,Y,Z axis mapping and sampling rate. If driver not detect this variable, then G-sensor driver wonˇt be loaded.
+<op>:<freq>:<axis-X>:<X-dir>:<axis-Y>:<Y-dir>:<axis-Z>:<Z-dir>:<avg-count>:<8bit>
+<op>:= Operation mode for the g-sensor
+0 : KXTE9-2050 G-Sensor is disabled.
+1 : KXTE9-2050 G-Sensor is enabled.
+<freq>:= G-Sensor sampling rate. The valid values are 1,3,10,and 40.
+<axis-X>:= G-Sensor axis-x will map to which axis of device.
+0 : X
+1 : Y
+2 : Z
+<X-dir>:= If G-Sensor axis-x direction is the same as device.
+1 : Positive direction
+-1 : Negative direction
+<axis-Y>:= G-Sensor axis-y will map to which axis of device.
+0 : X
+1 : Y
+2 : Z
+<Y-dir>:= If G-Sensor axis-y direction is the same as device.
+1 : Positive direction
+-1 : Negative direction
+<axis-Z>:= G-Sensor axis-z will map to which axis of device.
+0 : X
+1 : Y
+2 : Z
+<Z-dir>:= If G-Sensor axis-z direction is the same as device.
+1 : Positive direction
+-1 : Negative direction
+<avg-count>:= For every new/current axes values stored, add the newly stored axes with previously (avg-count-1) stored axes values and do an average
+<8bit>:= Using acceleration data as 8bit
+0 : 6bit
+1 : 8bit
+Ex:
+#KXTE9-2050 G-sensor enabled, using 40 sampling rate, X->-Y, Y->X, Z->-Z, 4 average count, using 8bit
+setenv wmt.io.gsensor 1:40:1:-1:0:-1:2:-1:4:1