diff options
Diffstat (limited to 'drivers/input/misc/keyspan_remote.c')
| -rw-r--r-- | drivers/input/misc/keyspan_remote.c | 588 |
1 files changed, 588 insertions, 0 deletions
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c new file mode 100644 index 00000000..d99151a8 --- /dev/null +++ b/drivers/input/misc/keyspan_remote.c @@ -0,0 +1,588 @@ +/* + * keyspan_remote: USB driver for the Keyspan DMR + * + * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * This driver has been put together with the support of Innosys, Inc. + * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb/input.h> + +#define DRIVER_VERSION "v0.1" +#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>" +#define DRIVER_DESC "Driver for the USB Keyspan remote control." +#define DRIVER_LICENSE "GPL" + +/* Parameters that can be passed to the driver. */ +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); + +/* Vendor and product ids */ +#define USB_KEYSPAN_VENDOR_ID 0x06CD +#define USB_KEYSPAN_PRODUCT_UIA11 0x0202 + +/* Defines for converting the data from the remote. */ +#define ZERO 0x18 +#define ZERO_MASK 0x1F /* 5 bits for a 0 */ +#define ONE 0x3C +#define ONE_MASK 0x3F /* 6 bits for a 1 */ +#define SYNC 0x3F80 +#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */ +#define STOP 0x00 +#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */ +#define GAP 0xFF + +#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */ + +/* + * Table that maps the 31 possible keycodes to input keys. + * Currently there are 15 and 17 button models so RESERVED codes + * are blank areas in the mapping. + */ +static const unsigned short keyspan_key_table[] = { + KEY_RESERVED, /* 0 is just a place holder. */ + KEY_RESERVED, + KEY_STOP, + KEY_PLAYCD, + KEY_RESERVED, + KEY_PREVIOUSSONG, + KEY_REWIND, + KEY_FORWARD, + KEY_NEXTSONG, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_PAUSE, + KEY_VOLUMEUP, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_VOLUMEDOWN, + KEY_RESERVED, + KEY_UP, + KEY_RESERVED, + KEY_MUTE, + KEY_LEFT, + KEY_ENTER, + KEY_RIGHT, + KEY_RESERVED, + KEY_RESERVED, + KEY_DOWN, + KEY_RESERVED, + KEY_KPASTERISK, + KEY_RESERVED, + KEY_MENU +}; + +/* table of devices that work with this driver */ +static struct usb_device_id keyspan_table[] = { + { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) }, + { } /* Terminating entry */ +}; + +/* Structure to store all the real stuff that a remote sends to us. */ +struct keyspan_message { + u16 system; + u8 button; + u8 toggle; +}; + +/* Structure used for all the bit testing magic needed to be done. */ +struct bit_tester { + u32 tester; + int len; + int pos; + int bits_left; + u8 buffer[32]; +}; + +/* Structure to hold all of our driver specific stuff */ +struct usb_keyspan { + char name[128]; + char phys[64]; + unsigned short keymap[ARRAY_SIZE(keyspan_key_table)]; + struct usb_device *udev; + struct input_dev *input; + struct usb_interface *interface; + struct usb_endpoint_descriptor *in_endpoint; + struct urb* irq_urb; + int open; + dma_addr_t in_dma; + unsigned char *in_buffer; + + /* variables used to parse messages from remote. */ + struct bit_tester data; + int stage; + int toggle; +}; + +static struct usb_driver keyspan_driver; + +/* + * Debug routine that prints out what we've received from the remote. + */ +static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ +{ + char codes[4 * RECV_SIZE]; + int i; + + for (i = 0; i < RECV_SIZE; i++) + snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]); + + dev_info(&dev->udev->dev, "%s\n", codes); +} + +/* + * Routine that manages the bit_tester structure. It makes sure that there are + * at least bits_needed bits loaded into the tester. + */ +static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) +{ + if (dev->data.bits_left >= bits_needed) + return 0; + + /* + * Somehow we've missed the last message. The message will be repeated + * though so it's not too big a deal + */ + if (dev->data.pos >= dev->data.len) { + dev_dbg(&dev->udev->dev, + "%s - Error ran out of data. pos: %d, len: %d\n", + __func__, dev->data.pos, dev->data.len); + return -1; + } + + /* Load as much as we can into the tester. */ + while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) && + (dev->data.pos < dev->data.len)) { + dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left); + dev->data.bits_left += 8; + } + + return 0; +} + +static void keyspan_report_button(struct usb_keyspan *remote, int button, int press) +{ + struct input_dev *input = remote->input; + + input_event(input, EV_MSC, MSC_SCAN, button); + input_report_key(input, remote->keymap[button], press); + input_sync(input); +} + +/* + * Routine that handles all the logic needed to parse out the message from the remote. + */ +static void keyspan_check_data(struct usb_keyspan *remote) +{ + int i; + int found = 0; + struct keyspan_message message; + + switch(remote->stage) { + case 0: + /* + * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler. + * So the first byte that isn't a FF should be the start of a new message. + */ + for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i); + + if (i < RECV_SIZE) { + memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE); + remote->data.len = RECV_SIZE; + remote->data.pos = 0; + remote->data.tester = 0; + remote->data.bits_left = 0; + remote->stage = 1; + } + break; + + case 1: + /* + * Stage 1 we should have 16 bytes and should be able to detect a + * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's. + */ + memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); + remote->data.len += RECV_SIZE; + + found = 0; + while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) { + for (i = 0; i < 8; ++i) { + if (keyspan_load_tester(remote, 14) != 0) { + remote->stage = 0; + return; + } + + if ((remote->data.tester & SYNC_MASK) == SYNC) { + remote->data.tester = remote->data.tester >> 14; + remote->data.bits_left -= 14; + found = 1; + break; + } else { + remote->data.tester = remote->data.tester >> 1; + --remote->data.bits_left; + } + } + } + + if (!found) { + remote->stage = 0; + remote->data.len = 0; + } else { + remote->stage = 2; + } + break; + + case 2: + /* + * Stage 2 we should have 24 bytes which will be enough for a full + * message. We need to parse out the system code, button code, + * toggle code, and stop. + */ + memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); + remote->data.len += RECV_SIZE; + + message.system = 0; + for (i = 0; i < 9; i++) { + keyspan_load_tester(remote, 6); + + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.system = message.system << 1; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.system = (message.system << 1) + 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Unknown sequence found in system data.\n", __func__); + remote->stage = 0; + return; + } + } + + message.button = 0; + for (i = 0; i < 5; i++) { + keyspan_load_tester(remote, 6); + + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.button = message.button << 1; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.button = (message.button << 1) + 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Unknown sequence found in button data.\n", __func__); + remote->stage = 0; + return; + } + } + + keyspan_load_tester(remote, 6); + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.toggle = 0; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.toggle = 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Error in message, invalid toggle.\n", __func__); + remote->stage = 0; + return; + } + + keyspan_load_tester(remote, 5); + if ((remote->data.tester & STOP_MASK) == STOP) { + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else { + err("Bad message received, no stop bit found.\n"); + } + + dev_dbg(&remote->udev->dev, + "%s found valid message: system: %d, button: %d, toggle: %d\n", + __func__, message.system, message.button, message.toggle); + + if (message.toggle != remote->toggle) { + keyspan_report_button(remote, message.button, 1); + keyspan_report_button(remote, message.button, 0); + remote->toggle = message.toggle; + } + + remote->stage = 0; + break; + } +} + +/* + * Routine for sending all the initialization messages to the remote. + */ +static int keyspan_setup(struct usb_device* dev) +{ + int retval = 0; + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n", + __func__, retval); + return(retval); + } + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x44, 0x40, 0x0, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n", + __func__, retval); + return(retval); + } + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x22, 0x40, 0x0, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n", + __func__, retval); + return(retval); + } + + dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__); + return(retval); +} + +/* + * Routine used to handle a new message that has come in. + */ +static void keyspan_irq_recv(struct urb *urb) +{ + struct usb_keyspan *dev = urb->context; + int retval; + + /* Check our status in case we need to bail out early. */ + switch (urb->status) { + case 0: + break; + + /* Device went away so don't keep trying to read from it. */ + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + goto resubmit; + break; + } + + if (debug) + keyspan_print(dev); + + keyspan_check_data(dev); + +resubmit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result: %d", __func__, retval); +} + +static int keyspan_open(struct input_dev *dev) +{ + struct usb_keyspan *remote = input_get_drvdata(dev); + + remote->irq_urb->dev = remote->udev; + if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void keyspan_close(struct input_dev *dev) +{ + struct usb_keyspan *remote = input_get_drvdata(dev); + + usb_kill_urb(remote->irq_urb); +} + +static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if (usb_endpoint_is_int_in(endpoint)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; +} + +/* + * Routine that sets up the driver to handle a specific USB device detected on the bus. + */ +static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_endpoint_descriptor *endpoint; + struct usb_keyspan *remote; + struct input_dev *input_dev; + int i, error; + + endpoint = keyspan_get_in_endpoint(interface->cur_altsetting); + if (!endpoint) + return -ENODEV; + + remote = kzalloc(sizeof(*remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!remote || !input_dev) { + error = -ENOMEM; + goto fail1; + } + + remote->udev = udev; + remote->input = input_dev; + remote->interface = interface; + remote->in_endpoint = endpoint; + remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ + + remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma); + if (!remote->in_buffer) { + error = -ENOMEM; + goto fail1; + } + + remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!remote->irq_urb) { + error = -ENOMEM; + goto fail2; + } + + error = keyspan_setup(udev); + if (error) { + error = -ENODEV; + goto fail3; + } + + if (udev->manufacturer) + strlcpy(remote->name, udev->manufacturer, sizeof(remote->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(remote->name, " ", sizeof(remote->name)); + strlcat(remote->name, udev->product, sizeof(remote->name)); + } + + if (!strlen(remote->name)) + snprintf(remote->name, sizeof(remote->name), + "USB Keyspan Remote %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + usb_make_path(udev, remote->phys, sizeof(remote->phys)); + strlcat(remote->phys, "/input0", sizeof(remote->phys)); + memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap)); + + input_dev->name = remote->name; + input_dev->phys = remote->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &interface->dev; + input_dev->keycode = remote->keymap; + input_dev->keycodesize = sizeof(unsigned short); + input_dev->keycodemax = ARRAY_SIZE(remote->keymap); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + __set_bit(EV_KEY, input_dev->evbit); + for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++) + __set_bit(keyspan_key_table[i], input_dev->keybit); + __clear_bit(KEY_RESERVED, input_dev->keybit); + + input_set_drvdata(input_dev, remote); + + input_dev->open = keyspan_open; + input_dev->close = keyspan_close; + + /* + * Initialize the URB to access the device. + * The urb gets sent to the device in keyspan_open() + */ + usb_fill_int_urb(remote->irq_urb, + remote->udev, + usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress), + remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote, + endpoint->bInterval); + remote->irq_urb->transfer_dma = remote->in_dma; + remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* we can register the device now, as it is ready */ + error = input_register_device(remote->input); + if (error) + goto fail3; + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, remote); + + return 0; + + fail3: usb_free_urb(remote->irq_urb); + fail2: usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + fail1: kfree(remote); + input_free_device(input_dev); + + return error; +} + +/* + * Routine called when a device is disconnected from the USB. + */ +static void keyspan_disconnect(struct usb_interface *interface) +{ + struct usb_keyspan *remote; + + remote = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ + input_unregister_device(remote->input); + usb_kill_urb(remote->irq_urb); + usb_free_urb(remote->irq_urb); + usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + kfree(remote); + } +} + +/* + * Standard driver set up sections + */ +static struct usb_driver keyspan_driver = +{ + .name = "keyspan_remote", + .probe = keyspan_probe, + .disconnect = keyspan_disconnect, + .id_table = keyspan_table +}; + +module_usb_driver(keyspan_driver); + +MODULE_DEVICE_TABLE(usb, keyspan_table); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); |