diff options
Diffstat (limited to 'drivers/ata/pata_pdc2027x.c')
| -rw-r--r-- | drivers/ata/pata_pdc2027x.c | 804 |
1 files changed, 804 insertions, 0 deletions
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c new file mode 100644 index 00000000..7d63f241 --- /dev/null +++ b/drivers/ata/pata_pdc2027x.c @@ -0,0 +1,804 @@ +/* + * Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Ported to libata by: + * Albert Lee <albertcc@tw.ibm.com> IBM Corporation + * + * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> + * Portions Copyright (C) 1999 Promise Technology, Inc. + * + * Author: Frank Tiernan (frankt@promise.com) + * Released under terms of General Public License + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware information only available under NDA. + * + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <linux/libata.h> + +#define DRV_NAME "pata_pdc2027x" +#define DRV_VERSION "1.0" +#undef PDC_DEBUG + +#ifdef PDC_DEBUG +#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) +#else +#define PDPRINTK(fmt, args...) +#endif + +enum { + PDC_MMIO_BAR = 5, + + PDC_UDMA_100 = 0, + PDC_UDMA_133 = 1, + + PDC_100_MHZ = 100000000, + PDC_133_MHZ = 133333333, + + PDC_SYS_CTL = 0x1100, + PDC_ATA_CTL = 0x1104, + PDC_GLOBAL_CTL = 0x1108, + PDC_CTCR0 = 0x110C, + PDC_CTCR1 = 0x1110, + PDC_BYTE_COUNT = 0x1120, + PDC_PLL_CTL = 0x1202, +}; + +static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int pdc2027x_reinit_one(struct pci_dev *pdev); +static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline); +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev); +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev); +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc); +static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask); +static int pdc2027x_cable_detect(struct ata_port *ap); +static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed); + +/* + * ATA Timing Tables based on 133MHz controller clock. + * These tables are only used when the controller is in 133MHz clock. + * If the controller is in 100MHz clock, the ASIC hardware will + * set the timing registers automatically when "set feature" command + * is issued to the device. However, if the controller clock is 133MHz, + * the following tables must be used. + */ +static struct pdc2027x_pio_timing { + u8 value0, value1, value2; +} pdc2027x_pio_timing_tbl [] = { + { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */ + { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */ + { 0x23, 0x26, 0x64 }, /* PIO mode 2 */ + { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */ + { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */ +}; + +static struct pdc2027x_mdma_timing { + u8 value0, value1; +} pdc2027x_mdma_timing_tbl [] = { + { 0xdf, 0x5f }, /* MDMA mode 0 */ + { 0x6b, 0x27 }, /* MDMA mode 1 */ + { 0x69, 0x25 }, /* MDMA mode 2 */ +}; + +static struct pdc2027x_udma_timing { + u8 value0, value1, value2; +} pdc2027x_udma_timing_tbl [] = { + { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */ + { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */ + { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */ + { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */ + { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */ + { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */ + { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ +}; + +static const struct pci_device_id pdc2027x_pci_tbl[] = { + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), PDC_UDMA_100 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), PDC_UDMA_100 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), PDC_UDMA_133 }, + { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), PDC_UDMA_133 }, + + { } /* terminate list */ +}; + +static struct pci_driver pdc2027x_pci_driver = { + .name = DRV_NAME, + .id_table = pdc2027x_pci_tbl, + .probe = pdc2027x_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = pdc2027x_reinit_one, +#endif +}; + +static struct scsi_host_template pdc2027x_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations pdc2027x_pata100_ops = { + .inherits = &ata_bmdma_port_ops, + .check_atapi_dma = pdc2027x_check_atapi_dma, + .cable_detect = pdc2027x_cable_detect, + .prereset = pdc2027x_prereset, +}; + +static struct ata_port_operations pdc2027x_pata133_ops = { + .inherits = &pdc2027x_pata100_ops, + .mode_filter = pdc2027x_mode_filter, + .set_piomode = pdc2027x_set_piomode, + .set_dmamode = pdc2027x_set_dmamode, + .set_mode = pdc2027x_set_mode, +}; + +static struct ata_port_info pdc2027x_port_info[] = { + /* PDC_UDMA_100 */ + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &pdc2027x_pata100_ops, + }, + /* PDC_UDMA_133 */ + { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &pdc2027x_pata133_ops, + }, +}; + +MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee"); +MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl); + +/** + * port_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @offset: offset from mmio base + */ +static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset) +{ + return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset; +} + +/** + * dev_mmio - Get the MMIO address of PDC2027x extended registers + * @ap: Port + * @adev: device + * @offset: offset from mmio base + */ +static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset) +{ + u8 adj = (adev->devno) ? 0x08 : 0x00; + return port_mmio(ap, offset) + adj; +} + +/** + * pdc2027x_pata_cable_detect - Probe host controller cable detect info + * @ap: Port for which cable detect info is desired + * + * Read 80c cable indicator from Promise extended register. + * This register is latched when the system is reset. + * + * LOCKING: + * None (inherited from caller). + */ +static int pdc2027x_cable_detect(struct ata_port *ap) +{ + u32 cgcr; + + /* check cable detect results */ + cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL)); + if (cgcr & (1 << 26)) + goto cbl40; + + PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no); + + return ATA_CBL_PATA80; +cbl40: + printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no); + return ATA_CBL_PATA40; +} + +/** + * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled. + * @ap: Port to check + */ +static inline int pdc2027x_port_enabled(struct ata_port *ap) +{ + return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02; +} + +/** + * pdc2027x_prereset - prereset for PATA host controller + * @link: Target link + * @deadline: deadline jiffies for the operation + * + * Probeinit including cable detection. + * + * LOCKING: + * None (inherited from caller). + */ + +static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline) +{ + /* Check whether port enabled */ + if (!pdc2027x_port_enabled(link->ap)) + return -ENOENT; + return ata_sff_prereset(link, deadline); +} + +/** + * pdc2720x_mode_filter - mode selection filter + * @adev: ATA device + * @mask: list of modes proposed + * + * Block UDMA on devices that cause trouble with this controller. + */ + +static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask) +{ + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + struct ata_device *pair = ata_dev_pair(adev); + + if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL) + return mask; + + /* Check for slave of a Maxtor at UDMA6 */ + ata_id_c_string(pair->id, model_num, ATA_ID_PROD, + ATA_ID_PROD_LEN + 1); + /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */ + if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6) + mask &= ~ (1 << (6 + ATA_SHIFT_UDMA)); + + return mask; +} + +/** + * pdc2027x_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port to configure + * @adev: um + * + * Set PIO mode for device. + * + * LOCKING: + * None (inherited from caller). + */ + +static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + u32 ctcr0, ctcr1; + + PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode); + + /* Sanity check */ + if (pio > 4) { + printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio); + return; + + } + + /* Set the PIO timing registers using value table for 133MHz */ + PDPRINTK("Set pio regs... \n"); + + ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); + ctcr0 &= 0xffff0000; + ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 | + (pdc2027x_pio_timing_tbl[pio].value1 << 8); + iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0x00ffffff; + ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24); + iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set pio regs done\n"); + + PDPRINTK("Set to pio mode[%u] \n", pio); +} + +/** + * pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings + * @ap: Port to configure + * @adev: um + * + * Set UDMA mode for device. + * + * LOCKING: + * None (inherited from caller). + */ +static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + unsigned int dma_mode = adev->dma_mode; + u32 ctcr0, ctcr1; + + if ((dma_mode >= XFER_UDMA_0) && + (dma_mode <= XFER_UDMA_6)) { + /* Set the UDMA timing registers with value table for 133MHz */ + unsigned int udma_mode = dma_mode & 0x07; + + if (dma_mode == XFER_UDMA_2) { + /* + * Turn off tHOLD. + * If tHOLD is '1', the hardware will add half clock for data hold time. + * This code segment seems to be no effect. tHOLD will be overwritten below. + */ + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1)); + } + + PDPRINTK("Set udma regs... \n"); + + ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1)); + ctcr1 &= 0xff000000; + ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 | + (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) | + (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16); + iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1)); + + PDPRINTK("Set udma regs done\n"); + + PDPRINTK("Set to udma mode[%u] \n", udma_mode); + + } else if ((dma_mode >= XFER_MW_DMA_0) && + (dma_mode <= XFER_MW_DMA_2)) { + /* Set the MDMA timing registers with value table for 133MHz */ + unsigned int mdma_mode = dma_mode & 0x07; + + PDPRINTK("Set mdma regs... \n"); + ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0)); + + ctcr0 &= 0x0000ffff; + ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) | + (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24); + + iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0)); + PDPRINTK("Set mdma regs done\n"); + + PDPRINTK("Set to mdma mode[%u] \n", mdma_mode); + } else { + printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode); + } +} + +/** + * pdc2027x_set_mode - Set the timing registers back to correct values. + * @link: link to configure + * @r_failed: Returned device for failure + * + * The pdc2027x hardware will look at "SET FEATURES" and change the timing registers + * automatically. The values set by the hardware might be incorrect, under 133Mhz PLL. + * This function overwrites the possibly incorrect values set by the hardware to be correct. + */ +static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed) +{ + struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc; + + rc = ata_do_set_mode(link, r_failed); + if (rc < 0) + return rc; + + ata_for_each_dev(dev, link, ENABLED) { + pdc2027x_set_piomode(ap, dev); + + /* + * Enable prefetch if the device support PIO only. + */ + if (dev->xfer_shift == ATA_SHIFT_PIO) { + u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1)); + ctcr1 |= (1 << 25); + iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1)); + + PDPRINTK("Turn on prefetch\n"); + } else { + pdc2027x_set_dmamode(ap, dev); + } + } + return 0; +} + +/** + * pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command + * @qc: Metadata associated with taskfile to check + * + * LOCKING: + * None (inherited from caller). + * + * RETURNS: 0 when ATAPI DMA can be used + * 1 otherwise + */ +static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *scsicmd = cmd->cmnd; + int rc = 1; /* atapi dma off by default */ + + /* + * This workaround is from Promise's GPL driver. + * If ATAPI DMA is used for commands not in the + * following white list, say MODE_SENSE and REQUEST_SENSE, + * pdc2027x might hit the irq lost problem. + */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + case READ_12: + case WRITE_12: + case READ_6: + case WRITE_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + /* ATAPI DMA is ok */ + rc = 0; + break; + default: + ; + } + + return rc; +} + +/** + * pdc_read_counter - Read the ctr counter + * @host: target ATA host + */ + +static long pdc_read_counter(struct ata_host *host) +{ + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; + long counter; + int retry = 1; + u32 bccrl, bccrh, bccrlv, bccrhv; + +retry: + bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; + + /* Read the counter values again for verification */ + bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; + + counter = (bccrh << 15) | bccrl; + + PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh, bccrl); + PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv); + + /* + * The 30-bit decreasing counter are read by 2 pieces. + * Incorrect value may be read when both bccrh and bccrl are changing. + * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read. + */ + if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) { + retry--; + PDPRINTK("rereading counter\n"); + goto retry; + } + + return counter; +} + +/** + * adjust_pll - Adjust the PLL input clock in Hz. + * + * @pdc_controller: controller specific information + * @host: target ATA host + * @pll_clock: The input of PLL in HZ + */ +static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx) +{ + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; + u16 pll_ctl; + long pll_clock_khz = pll_clock / 1000; + long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; + long ratio = pout_required / pll_clock_khz; + int F, R; + + /* Sanity check */ + if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) { + printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz); + return; + } + +#ifdef PDC_DEBUG + PDPRINTK("pout_required is %ld\n", pout_required); + + /* Show the current clock value of PLL control register + * (maybe already configured by the firmware) + */ + pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + /* + * Calculate the ratio of F, R and OD + * POUT = (F + 2) / (( R + 2) * NO) + */ + if (ratio < 8600L) { /* 8.6x */ + /* Using NO = 0x01, R = 0x0D */ + R = 0x0d; + } else if (ratio < 12900L) { /* 12.9x */ + /* Using NO = 0x01, R = 0x08 */ + R = 0x08; + } else if (ratio < 16100L) { /* 16.1x */ + /* Using NO = 0x01, R = 0x06 */ + R = 0x06; + } else if (ratio < 64000L) { /* 64x */ + R = 0x00; + } else { + /* Invalid ratio */ + printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio); + return; + } + + F = (ratio * (R+2)) / 1000 - 2; + + if (unlikely(F < 0 || F > 127)) { + /* Invalid F */ + printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F); + return; + } + + PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio); + + pll_ctl = (R << 8) | F; + + PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl); + + iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL); + ioread16(mmio_base + PDC_PLL_CTL); /* flush */ + + /* Wait the PLL circuit to be stable */ + mdelay(30); + +#ifdef PDC_DEBUG + /* + * Show the current clock value of PLL control register + * (maybe configured by the firmware) + */ + pll_ctl = ioread16(mmio_base + PDC_PLL_CTL); + + PDPRINTK("pll_ctl[%X]\n", pll_ctl); +#endif + + return; +} + +/** + * detect_pll_input_clock - Detect the PLL input clock in Hz. + * @host: target ATA host + * Ex. 16949000 on 33MHz PCI bus for pdc20275. + * Half of the PCI clock. + */ +static long pdc_detect_pll_input_clock(struct ata_host *host) +{ + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; + u32 scr; + long start_count, end_count; + struct timeval start_time, end_time; + long pll_clock, usec_elapsed; + + /* Start the test mode */ + scr = ioread32(mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); + ioread32(mmio_base + PDC_SYS_CTL); /* flush */ + + /* Read current counter value */ + start_count = pdc_read_counter(host); + do_gettimeofday(&start_time); + + /* Let the counter run for 100 ms. */ + mdelay(100); + + /* Read the counter values again */ + end_count = pdc_read_counter(host); + do_gettimeofday(&end_time); + + /* Stop the test mode */ + scr = ioread32(mmio_base + PDC_SYS_CTL); + PDPRINTK("scr[%X]\n", scr); + iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL); + ioread32(mmio_base + PDC_SYS_CTL); /* flush */ + + /* calculate the input clock in Hz */ + usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + + (end_time.tv_usec - start_time.tv_usec); + + pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 * + (100000000 / usec_elapsed); + + PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); + PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock); + + return pll_clock; +} + +/** + * pdc_hardware_init - Initialize the hardware. + * @host: target ATA host + * @board_idx: board identifier + */ +static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) +{ + long pll_clock; + + /* + * Detect PLL input clock rate. + * On some system, where PCI bus is running at non-standard clock rate. + * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. + * The pdc20275 controller employs PLL circuit to help correct timing registers setting. + */ + pll_clock = pdc_detect_pll_input_clock(host); + + dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000); + + /* Adjust PLL control register */ + pdc_adjust_pll(host, pll_clock, board_idx); + + return 0; +} + +/** + * pdc_ata_setup_port - setup the mmio address + * @port: ata ioports to setup + * @base: base address + */ +static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) +{ + port->cmd_addr = + port->data_addr = base; + port->feature_addr = + port->error_addr = base + 0x05; + port->nsect_addr = base + 0x0a; + port->lbal_addr = base + 0x0f; + port->lbam_addr = base + 0x10; + port->lbah_addr = base + 0x15; + port->device_addr = base + 0x1a; + port->command_addr = + port->status_addr = base + 0x1f; + port->altstatus_addr = + port->ctl_addr = base + 0x81a; +} + +/** + * pdc2027x_init_one - PCI probe function + * Called when an instance of PCI adapter is inserted. + * This function checks whether the hardware is supported, + * initialize hardware and register an instance of ata_host to + * libata. (implements struct pci_driver.probe() ) + * + * @pdev: instance of pci_dev found + * @ent: matching entry in the id_tbl[] + */ +static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 }; + static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 }; + unsigned int board_idx = (unsigned int) ent->driver_data; + const struct ata_port_info *ppi[] = + { &pdc2027x_port_info[board_idx], NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int i, rc; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + return rc; + + mmio_base = host->iomap[PDC_MMIO_BAR]; + + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]); + ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i]; + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd"); + } + + //pci_enable_intx(pdev); + + /* initialize adapter */ + if (pdc_hardware_init(host, board_idx) != 0) + return -EIO; + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &pdc2027x_sht); +} + +#ifdef CONFIG_PM +static int pdc2027x_reinit_one(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + unsigned int board_idx; + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 || + pdev->device == PCI_DEVICE_ID_PROMISE_20270) + board_idx = PDC_UDMA_100; + else + board_idx = PDC_UDMA_133; + + if (pdc_hardware_init(host, board_idx)) + return -EIO; + + ata_host_resume(host); + return 0; +} +#endif + +/** + * pdc2027x_init - Called after this module is loaded into the kernel. + */ +static int __init pdc2027x_init(void) +{ + return pci_register_driver(&pdc2027x_pci_driver); +} + +/** + * pdc2027x_exit - Called before this module unloaded from the kernel + */ +static void __exit pdc2027x_exit(void) +{ + pci_unregister_driver(&pdc2027x_pci_driver); +} + +module_init(pdc2027x_init); +module_exit(pdc2027x_exit); |