diff options
Diffstat (limited to 'arch/mips/include/asm/octeon/cvmx-spi.h')
| -rw-r--r-- | arch/mips/include/asm/octeon/cvmx-spi.h | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/arch/mips/include/asm/octeon/cvmx-spi.h b/arch/mips/include/asm/octeon/cvmx-spi.h new file mode 100644 index 00000000..e8146489 --- /dev/null +++ b/arch/mips/include/asm/octeon/cvmx-spi.h @@ -0,0 +1,269 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * This file contains defines for the SPI interface + */ +#ifndef __CVMX_SPI_H__ +#define __CVMX_SPI_H__ + +#include "cvmx-gmxx-defs.h" + +/* CSR typedefs have been moved to cvmx-csr-*.h */ + +typedef enum { + CVMX_SPI_MODE_UNKNOWN = 0, + CVMX_SPI_MODE_TX_HALFPLEX = 1, + CVMX_SPI_MODE_RX_HALFPLEX = 2, + CVMX_SPI_MODE_DUPLEX = 3 +} cvmx_spi_mode_t; + +/** Callbacks structure to customize SPI4 initialization sequence */ +typedef struct { + /** Called to reset SPI4 DLL */ + int (*reset_cb) (int interface, cvmx_spi_mode_t mode); + + /** Called to setup calendar */ + int (*calendar_setup_cb) (int interface, cvmx_spi_mode_t mode, + int num_ports); + + /** Called for Tx and Rx clock detection */ + int (*clock_detect_cb) (int interface, cvmx_spi_mode_t mode, + int timeout); + + /** Called to perform link training */ + int (*training_cb) (int interface, cvmx_spi_mode_t mode, int timeout); + + /** Called for calendar data synchronization */ + int (*calendar_sync_cb) (int interface, cvmx_spi_mode_t mode, + int timeout); + + /** Called when interface is up */ + int (*interface_up_cb) (int interface, cvmx_spi_mode_t mode); + +} cvmx_spi_callbacks_t; + +/** + * Return true if the supplied interface is configured for SPI + * + * @interface: Interface to check + * Returns True if interface is SPI + */ +static inline int cvmx_spi_is_spi_interface(int interface) +{ + uint64_t gmxState = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + return (gmxState & 0x2) && (gmxState & 0x1); +} + +/** + * Initialize and start the SPI interface. + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * @num_ports: Number of SPI ports to configure + * + * Returns Zero on success, negative of failure. + */ +extern int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, + int timeout, int num_ports); + +/** + * This routine restarts the SPI interface after it has lost synchronization + * with its corespondant system. + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * Returns Zero on success, negative of failure. + */ +extern int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, + int timeout); + +/** + * Return non-zero if the SPI interface has a SPI4000 attached + * + * @interface: SPI interface the SPI4000 is connected to + * + * Returns + */ +static inline int cvmx_spi4000_is_present(int interface) +{ + return 0; +} + +/** + * Initialize the SPI4000 for use + * + * @interface: SPI interface the SPI4000 is connected to + */ +static inline int cvmx_spi4000_initialize(int interface) +{ + return 0; +} + +/** + * Poll all the SPI4000 port and check its speed + * + * @interface: Interface the SPI4000 is on + * @port: Port to poll (0-9) + * Returns Status of the port. 0=down. All other values the port is up. + */ +static inline union cvmx_gmxx_rxx_rx_inbnd cvmx_spi4000_check_speed( + int interface, + int port) +{ + union cvmx_gmxx_rxx_rx_inbnd r; + r.u64 = 0; + return r; +} + +/** + * Get current SPI4 initialization callbacks + * + * @callbacks: Pointer to the callbacks structure.to fill + * + * Returns Pointer to cvmx_spi_callbacks_t structure. + */ +extern void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t *callbacks); + +/** + * Set new SPI4 initialization callbacks + * + * @new_callbacks: Pointer to an updated callbacks structure. + */ +extern void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks); + +/** + * Callback to perform SPI4 reset + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +extern int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode); + +/** + * Callback to setup calendar and miscellaneous settings before clock + * detection + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @num_ports: Number of ports to configure on SPI + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +extern int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, + int num_ports); + +/** + * Callback to perform clock detection + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +extern int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, + int timeout); + +/** + * Callback to perform link training + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for link to be trained (in seconds) + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +extern int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, + int timeout); + +/** + * Callback to perform calendar data synchronization + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for calendar data in seconds + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +extern int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, + int timeout); + +/** + * Callback to handle interface up + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +extern int cvmx_spi_interface_up_cb(int interface, cvmx_spi_mode_t mode); + +#endif /* __CVMX_SPI_H__ */ |