diff options
Diffstat (limited to 'arch/blackfin/mach-common/entry.S')
| -rw-r--r-- | arch/blackfin/mach-common/entry.S | 1764 |
1 files changed, 1764 insertions, 0 deletions
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S new file mode 100644 index 00000000..4698a980 --- /dev/null +++ b/arch/blackfin/mach-common/entry.S @@ -0,0 +1,1764 @@ +/* + * Contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all + * interrupts and faults that can result in a task-switch. + * + * Copyright 2005-2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +/* NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + */ + +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/unistd.h> +#include <asm/blackfin.h> +#include <asm/errno.h> +#include <asm/fixed_code.h> +#include <asm/thread_info.h> /* TIF_NEED_RESCHED */ +#include <asm/asm-offsets.h> +#include <asm/trace.h> +#include <asm/traps.h> + +#include <asm/context.S> + +#if defined(CONFIG_BFIN_SCRATCH_REG_RETN) +# define EX_SCRATCH_REG RETN +#elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) +# define EX_SCRATCH_REG RETE +#else +# define EX_SCRATCH_REG CYCLES +#endif + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +/* Slightly simplified and streamlined entry point for CPLB misses. + * This one does not lower the level to IRQ5, and thus can be used to + * patch up CPLB misses on the kernel stack. + */ +#if ANOMALY_05000261 +#define _ex_dviol _ex_workaround_261 +#define _ex_dmiss _ex_workaround_261 +#define _ex_dmult _ex_workaround_261 + +ENTRY(_ex_workaround_261) + /* + * Work around an anomaly: if we see a new DCPLB fault, return + * without doing anything. Then, if we get the same fault again, + * handle it. + */ + P4 = R7; /* Store EXCAUSE */ + + GET_PDA(p5, r7); + r7 = [p5 + PDA_LFRETX]; + r6 = retx; + [p5 + PDA_LFRETX] = r6; + cc = r6 == r7; + if !cc jump _bfin_return_from_exception; + /* fall through */ + R7 = P4; + R6 = VEC_CPLB_M; /* Data CPLB Miss */ + cc = R6 == R7; + if cc jump _ex_dcplb_miss (BP); +#ifdef CONFIG_MPU + R6 = VEC_CPLB_VL; /* Data CPLB Violation */ + cc = R6 == R7; + if cc jump _ex_dcplb_viol (BP); +#endif + /* Handle Data CPLB Protection Violation + * and Data CPLB Multiple Hits - Linux Trap Zero + */ + jump _ex_trap_c; +ENDPROC(_ex_workaround_261) + +#else +#ifdef CONFIG_MPU +#define _ex_dviol _ex_dcplb_viol +#else +#define _ex_dviol _ex_trap_c +#endif +#define _ex_dmiss _ex_dcplb_miss +#define _ex_dmult _ex_trap_c +#endif + + +ENTRY(_ex_dcplb_viol) +ENTRY(_ex_dcplb_miss) +ENTRY(_ex_icplb_miss) + (R7:6,P5:4) = [sp++]; + /* We leave the previously pushed ASTAT on the stack. */ + SAVE_CONTEXT_CPLB + + /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that + * will change the stack pointer. */ + R0 = SEQSTAT; + R1 = SP; + + DEBUG_HWTRACE_SAVE(p5, r7) + + sp += -12; + call _cplb_hdr; + sp += 12; + CC = R0 == 0; + IF !CC JUMP _handle_bad_cplb; + +#ifdef CONFIG_DEBUG_DOUBLEFAULT + /* While we were processing this, did we double fault? */ + r7 = SEQSTAT; /* reason code is in bit 5:0 */ + r6.l = lo(SEQSTAT_EXCAUSE); + r6.h = hi(SEQSTAT_EXCAUSE); + r7 = r7 & r6; + r6 = 0x25; + CC = R7 == R6; + if CC JUMP _double_fault; +#endif + + DEBUG_HWTRACE_RESTORE(p5, r7) + RESTORE_CONTEXT_CPLB + ASTAT = [SP++]; + SP = EX_SCRATCH_REG; + rtx; +ENDPROC(_ex_icplb_miss) + +ENTRY(_ex_syscall) + raise 15; /* invoked by TRAP #0, for sys call */ + jump.s _bfin_return_from_exception; +ENDPROC(_ex_syscall) + +ENTRY(_ex_single_step) + /* If we just returned from an interrupt, the single step event is + for the RTI instruction. */ + r7 = retx; + r6 = reti; + cc = r7 == r6; + if cc jump _bfin_return_from_exception; + +#ifdef CONFIG_KGDB + /* Don't do single step in hardware exception handler */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); + r6 = [p5]; + cc = bittst(r6, 4); + if cc jump _bfin_return_from_exception; + cc = bittst(r6, 5); + if cc jump _bfin_return_from_exception; + + /* skip single step if current interrupt priority is higher than + * that of the first instruction, from which gdb starts single step */ + r6 >>= 6; + r7 = 10; +.Lfind_priority_start: + cc = bittst(r6, 0); + if cc jump .Lfind_priority_done; + r6 >>= 1; + r7 += -1; + cc = r7 == 0; + if cc jump .Lfind_priority_done; + jump.s .Lfind_priority_start; +.Lfind_priority_done: + p4.l = _kgdb_single_step; + p4.h = _kgdb_single_step; + r6 = [p4]; + cc = r6 == 0; + if cc jump .Ldo_single_step; + r6 += -1; + cc = r6 < r7; + if cc jump 1f; +.Ldo_single_step: +#else + /* If we were in user mode, do the single step normally. */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); + r6 = [p5]; + r7 = 0xffe0 (z); + r7 = r7 & r6; + cc = r7 == 0; + if !cc jump 1f; +#endif +#ifdef CONFIG_EXACT_HWERR + /* Read the ILAT, and to check to see if the process we are + * single stepping caused a previous hardware error + * If so, do not single step, (which lowers to IRQ5, and makes + * us miss the error). + */ + p5.l = lo(ILAT); + p5.h = hi(ILAT); + r7 = [p5]; + cc = bittst(r7, EVT_IVHW_P); + if cc jump 1f; +#endif + /* Single stepping only a single instruction, so clear the trace + * bit here. */ + r7 = syscfg; + bitclr (r7, SYSCFG_SSSTEP_P); + syscfg = R7; + jump _ex_trap_c; + +1: + /* + * We were in an interrupt handler. By convention, all of them save + * SYSCFG with their first instruction, so by checking whether our + * RETX points at the entry point, we can determine whether to allow + * a single step, or whether to clear SYSCFG. + * + * First, find out the interrupt level and the event vector for it. + */ + p5.l = lo(EVT0); + p5.h = hi(EVT0); + p5 += -4; +2: + r7 = rot r7 by -1; + p5 += 4; + if !cc jump 2b; + + /* What we actually do is test for the _second_ instruction in the + * IRQ handler. That way, if there are insns following the restore + * of SYSCFG after leaving the handler, we will not turn off SYSCFG + * for them. */ + + r7 = [p5]; + r7 += 2; + r6 = RETX; + cc = R7 == R6; + if !cc jump _bfin_return_from_exception; + + r7 = syscfg; + bitclr (r7, SYSCFG_SSSTEP_P); /* Turn off single step */ + syscfg = R7; + + /* Fall through to _bfin_return_from_exception. */ +ENDPROC(_ex_single_step) + +ENTRY(_bfin_return_from_exception) +#if ANOMALY_05000257 + R7=LC0; + LC0=R7; + R7=LC1; + LC1=R7; +#endif + +#ifdef CONFIG_DEBUG_DOUBLEFAULT + /* While we were processing the current exception, + * did we cause another, and double fault? + */ + r7 = SEQSTAT; /* reason code is in bit 5:0 */ + r6.l = lo(SEQSTAT_EXCAUSE); + r6.h = hi(SEQSTAT_EXCAUSE); + r7 = r7 & r6; + r6 = VEC_UNCOV; + CC = R7 == R6; + if CC JUMP _double_fault; +#endif + + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + sp = EX_SCRATCH_REG; + rtx; +ENDPROC(_bfin_return_from_exception) + +ENTRY(_handle_bad_cplb) + DEBUG_HWTRACE_RESTORE(p5, r7) + /* To get here, we just tried and failed to change a CPLB + * so, handle things in trap_c (C code), by lowering to + * IRQ5, just like we normally do. Since this is not a + * "normal" return path, we have a do a lot of stuff to + * the stack to get ready so, we can fall through - we + * need to make a CPLB exception look like a normal exception + */ + RESTORE_CONTEXT_CPLB + /* ASTAT is still on the stack, where it is needed. */ + [--sp] = (R7:6,P5:4); + +ENTRY(_ex_replaceable) + nop; + +ENTRY(_ex_trap_c) + /* The only thing that has been saved in this context is + * (R7:6,P5:4), ASTAT & SP - don't use anything else + */ + + GET_PDA(p5, r6); + + /* Make sure we are not in a double fault */ + p4.l = lo(IPEND); + p4.h = hi(IPEND); + r7 = [p4]; + CC = BITTST (r7, 5); + if CC jump _double_fault; + [p5 + PDA_EXIPEND] = r7; + + /* Call C code (trap_c) to handle the exception, which most + * likely involves sending a signal to the current process. + * To avoid double faults, lower our priority to IRQ5 first. + */ + r7.h = _exception_to_level5; + r7.l = _exception_to_level5; + p4.l = lo(EVT5); + p4.h = hi(EVT5); + [p4] = r7; + csync; + + /* + * Save these registers, as they are only valid in exception context + * (where we are now - as soon as we defer to IRQ5, they can change) + * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3, + * but they are not very interesting, so don't save them + */ + + p4.l = lo(DCPLB_FAULT_ADDR); + p4.h = hi(DCPLB_FAULT_ADDR); + r7 = [p4]; + [p5 + PDA_DCPLB] = r7; + + p4.l = lo(ICPLB_FAULT_ADDR); + p4.h = hi(ICPLB_FAULT_ADDR); + r6 = [p4]; + [p5 + PDA_ICPLB] = r6; + + r6 = retx; + [p5 + PDA_RETX] = r6; + + r6 = SEQSTAT; + [p5 + PDA_SEQSTAT] = r6; + + /* Save the state of single stepping */ + r6 = SYSCFG; + [p5 + PDA_SYSCFG] = r6; + /* Clear it while we handle the exception in IRQ5 mode */ + BITCLR(r6, SYSCFG_SSSTEP_P); + SYSCFG = r6; + + /* Save the current IMASK, since we change in order to jump to level 5 */ + cli r6; + [p5 + PDA_EXIMASK] = r6; + + p4.l = lo(SAFE_USER_INSTRUCTION); + p4.h = hi(SAFE_USER_INSTRUCTION); + retx = p4; + + /* Disable all interrupts, but make sure level 5 is enabled so + * we can switch to that level. + */ + r6 = 0x3f; + sti r6; + + /* In case interrupts are disabled IPEND[4] (global interrupt disable bit) + * clear it (re-enabling interrupts again) by the special sequence of pushing + * RETI onto the stack. This way we can lower ourselves to IVG5 even if the + * exception was taken after the interrupt handler was called but before it + * got a chance to enable global interrupts itself. + */ + [--sp] = reti; + sp += 4; + + raise 5; + jump.s _bfin_return_from_exception; +ENDPROC(_ex_trap_c) + +/* We just realized we got an exception, while we were processing a different + * exception. This is a unrecoverable event, so crash. + * Note: this cannot be ENTRY() as we jump here with "if cc jump" ... + */ +ENTRY(_double_fault) + /* Turn caches & protection off, to ensure we don't get any more + * double exceptions + */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */ + [P4] = R5; + SSYNC; + + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */ + [P4] = R5; + SSYNC; + + /* Fix up the stack */ + (R7:6,P5:4) = [sp++]; + ASTAT = [sp++]; + SP = EX_SCRATCH_REG; + + /* We should be out of the exception stack, and back down into + * kernel or user space stack + */ + SAVE_ALL_SYS + + /* The dumping functions expect the return address in the RETI + * slot. */ + r6 = retx; + [sp + PT_PC] = r6; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + SP += -12; + pseudo_long_call _double_fault_c, p5; + SP += 12; +.L_double_fault_panic: + JUMP .L_double_fault_panic + +ENDPROC(_double_fault) + +ENTRY(_exception_to_level5) + SAVE_ALL_SYS + + GET_PDA(p5, r7); /* Fetch current PDA */ + r6 = [p5 + PDA_RETX]; + [sp + PT_PC] = r6; + + r6 = [p5 + PDA_SYSCFG]; + [sp + PT_SYSCFG] = r6; + + r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */ + [sp + PT_SEQSTAT] = r6; + + /* Restore the hardware error vector. */ + r7.h = _evt_ivhw; + r7.l = _evt_ivhw; + p4.l = lo(EVT5); + p4.h = hi(EVT5); + [p4] = r7; + csync; + +#ifdef CONFIG_DEBUG_DOUBLEFAULT + /* Now that we have the hardware error vector programmed properly + * we can re-enable interrupts (IPEND[4]), so if the _trap_c causes + * another hardware error, we can catch it (self-nesting). + */ + [--sp] = reti; + sp += 4; +#endif + + r7 = [p5 + PDA_EXIPEND] /* Read the IPEND from the Exception state */ + [sp + PT_IPEND] = r7; /* Store IPEND onto the stack */ + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + SP += -12; + pseudo_long_call _trap_c, p4; + SP += 12; + + /* If interrupts were off during the exception (IPEND[4] = 1), turn them off + * before we return. + */ + CC = BITTST(r7, EVT_IRPTEN_P) + if !CC jump 1f; + /* this will load a random value into the reti register - but that is OK, + * since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro + */ + sp += -4; + reti = [sp++]; +1: + /* restore the interrupt mask (IMASK) */ + r6 = [p5 + PDA_EXIMASK]; + sti r6; + + call _ret_from_exception; + RESTORE_ALL_SYS + rti; +ENDPROC(_exception_to_level5) + +ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ + /* Since the kernel stack can be anywhere, it's not guaranteed to be + * covered by a CPLB. Switch to an exception stack; use RETN as a + * scratch register (for want of a better option). + */ + EX_SCRATCH_REG = sp; + GET_PDA_SAFE(sp); + sp = [sp + PDA_EXSTACK]; + /* Try to deal with syscalls quickly. */ + [--sp] = ASTAT; + [--sp] = (R7:6,P5:4); + + ANOMALY_283_315_WORKAROUND(p5, r7) + +#ifdef CONFIG_EXACT_HWERR + /* Make sure all pending read/writes complete. This will ensure any + * accesses which could cause hardware errors completes, and signal + * the the hardware before we do something silly, like crash the + * kernel. We don't need to work around anomaly 05000312, since + * we are already atomic + */ + ssync; +#endif + +#ifdef CONFIG_DEBUG_DOUBLEFAULT + /* + * Save these registers, as they are only valid in exception context + * (where we are now - as soon as we defer to IRQ5, they can change) + * DCPLB_STATUS and ICPLB_STATUS are also only valid in EVT3, + * but they are not very interesting, so don't save them + */ + + GET_PDA(p5, r7); + p4.l = lo(DCPLB_FAULT_ADDR); + p4.h = hi(DCPLB_FAULT_ADDR); + r7 = [p4]; + [p5 + PDA_DF_DCPLB] = r7; + + p4.l = lo(ICPLB_FAULT_ADDR); + p4.h = hi(ICPLB_FAULT_ADDR); + r7 = [p4]; + [p5 + PDA_DF_ICPLB] = r7; + + r7 = retx; + [p5 + PDA_DF_RETX] = r7; + + r7 = SEQSTAT; /* reason code is in bit 5:0 */ + [p5 + PDA_DF_SEQSTAT] = r7; +#else + r7 = SEQSTAT; /* reason code is in bit 5:0 */ +#endif + r6.l = lo(SEQSTAT_EXCAUSE); + r6.h = hi(SEQSTAT_EXCAUSE); + r7 = r7 & r6; + p5.h = _ex_table; + p5.l = _ex_table; + p4 = r7; + p5 = p5 + (p4 << 2); + p4 = [p5]; + jump (p4); + +.Lbadsys: + r7 = -ENOSYS; /* signextending enough */ + [sp + PT_R0] = r7; /* return value from system call */ + jump .Lsyscall_really_exit; +ENDPROC(_trap) + +ENTRY(_kernel_execve) + link SIZEOF_PTREGS; + p0 = sp; + r3 = SIZEOF_PTREGS / 4; + r4 = 0(x); +.Lclear_regs: + [p0++] = r4; + r3 += -1; + cc = r3 == 0; + if !cc jump .Lclear_regs (bp); + + p0 = sp; + sp += -16; + [sp + 12] = p0; + pseudo_long_call _do_execve, p5; + SP += 16; + cc = r0 == 0; + if ! cc jump .Lexecve_failed; + /* Success. Copy our temporary pt_regs to the top of the kernel + * stack and do a normal exception return. + */ + r1 = sp; + r0 = (-KERNEL_STACK_SIZE) (x); + r1 = r1 & r0; + p2 = r1; + p3 = [p2]; + r0 = KERNEL_STACK_SIZE - 4 (z); + p1 = r0; + p1 = p1 + p2; + + p0 = fp; + r4 = [p0--]; + r3 = SIZEOF_PTREGS / 4; +.Lcopy_regs: + r4 = [p0--]; + [p1--] = r4; + r3 += -1; + cc = r3 == 0; + if ! cc jump .Lcopy_regs (bp); + + r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z); + p1 = r0; + p1 = p1 + p2; + sp = p1; + r0 = syscfg; + [SP + PT_SYSCFG] = r0; + [p3 + (TASK_THREAD + THREAD_KSP)] = sp; + + RESTORE_CONTEXT; + rti; +.Lexecve_failed: + unlink; + rts; +ENDPROC(_kernel_execve) + +ENTRY(_system_call) + /* Store IPEND */ + p2.l = lo(IPEND); + p2.h = hi(IPEND); + csync; + r0 = [p2]; + [sp + PT_IPEND] = r0; + + /* Store RETS for now */ + r0 = rets; + [sp + PT_RESERVED] = r0; + /* Set the stack for the current process */ + r7 = sp; + r6.l = lo(ALIGN_PAGE_MASK); + r6.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r6; /* thread_info */ + p2 = r7; + p2 = [p2]; + + [p2+(TASK_THREAD+THREAD_KSP)] = sp; +#ifdef CONFIG_IPIPE + r0 = sp; + SP += -12; + pseudo_long_call ___ipipe_syscall_root, p0; + SP += 12; + cc = r0 == 1; + if cc jump .Lsyscall_really_exit; + cc = r0 == -1; + if cc jump .Lresume_userspace; + r3 = [sp + PT_R3]; + r4 = [sp + PT_R4]; + p0 = [sp + PT_ORIG_P0]; +#endif /* CONFIG_IPIPE */ + + /* are we tracing syscalls?*/ + r7 = sp; + r6.l = lo(ALIGN_PAGE_MASK); + r6.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r6; + p2 = r7; + r7 = [p2+TI_FLAGS]; + CC = BITTST(r7,TIF_SYSCALL_TRACE); + if CC JUMP _sys_trace; + CC = BITTST(r7,TIF_SINGLESTEP); + if CC JUMP _sys_trace; + + /* Make sure the system call # is valid */ + p4 = __NR_syscall; + /* System call number is passed in P0 */ + cc = p4 <= p0; + if cc jump .Lbadsys; + + /* Execute the appropriate system call */ + + p4 = p0; + p5.l = _sys_call_table; + p5.h = _sys_call_table; + p5 = p5 + (p4 << 2); + r0 = [sp + PT_R0]; + r1 = [sp + PT_R1]; + r2 = [sp + PT_R2]; + p5 = [p5]; + + [--sp] = r5; + [--sp] = r4; + [--sp] = r3; + SP += -12; + call (p5); + SP += 24; + [sp + PT_R0] = r0; + +.Lresume_userspace: + r7 = sp; + r4.l = lo(ALIGN_PAGE_MASK); + r4.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r4; /* thread_info->flags */ + p5 = r7; +.Lresume_userspace_1: + /* Disable interrupts. */ + [--sp] = reti; + reti = [sp++]; + + r7 = [p5 + TI_FLAGS]; + r4.l = lo(_TIF_WORK_MASK); + r4.h = hi(_TIF_WORK_MASK); + r7 = r7 & r4; + +.Lsyscall_resched: +#ifdef CONFIG_IPIPE + cc = BITTST(r7, TIF_IRQ_SYNC); + if !cc jump .Lsyscall_no_irqsync; + /* + * Clear IPEND[4] manually to undo what resume_userspace_1 just did; + * we need this so that high priority domain interrupts may still + * preempt the current domain while the pipeline log is being played + * back. + */ + [--sp] = reti; + SP += 4; /* don't merge with next insn to keep the pattern obvious */ + SP += -12; + pseudo_long_call ___ipipe_sync_root, p4; + SP += 12; + jump .Lresume_userspace_1; +.Lsyscall_no_irqsync: +#endif + cc = BITTST(r7, TIF_NEED_RESCHED); + if !cc jump .Lsyscall_sigpending; + + /* Reenable interrupts. */ + [--sp] = reti; + sp += 4; + + SP += -12; + pseudo_long_call _schedule, p4; + SP += 12; + + jump .Lresume_userspace_1; + +.Lsyscall_sigpending: + cc = BITTST(r7, TIF_RESTORE_SIGMASK); + if cc jump .Lsyscall_do_signals; + cc = BITTST(r7, TIF_SIGPENDING); + if cc jump .Lsyscall_do_signals; + cc = BITTST(r7, TIF_NOTIFY_RESUME); + if !cc jump .Lsyscall_really_exit; +.Lsyscall_do_signals: + /* Reenable interrupts. */ + [--sp] = reti; + sp += 4; + + r0 = sp; + SP += -12; + pseudo_long_call _do_notify_resume, p5; + SP += 12; + +.Lsyscall_really_exit: + r5 = [sp + PT_RESERVED]; + rets = r5; + rts; +ENDPROC(_system_call) + +/* Do not mark as ENTRY() to avoid error in assembler ... + * this symbol need not be global anyways, so ... + */ +_sys_trace: + r0 = sp; + pseudo_long_call _syscall_trace_enter, p5; + + /* Make sure the system call # is valid */ + p4 = [SP + PT_P0]; + p3 = __NR_syscall; + cc = p3 <= p4; + r0 = -ENOSYS; + if cc jump .Lsys_trace_badsys; + + /* Execute the appropriate system call */ + p5.l = _sys_call_table; + p5.h = _sys_call_table; + p5 = p5 + (p4 << 2); + r0 = [sp + PT_R0]; + r1 = [sp + PT_R1]; + r2 = [sp + PT_R2]; + r3 = [sp + PT_R3]; + r4 = [sp + PT_R4]; + r5 = [sp + PT_R5]; + p5 = [p5]; + + [--sp] = r5; + [--sp] = r4; + [--sp] = r3; + SP += -12; + call (p5); + SP += 24; +.Lsys_trace_badsys: + [sp + PT_R0] = r0; + + r0 = sp; + pseudo_long_call _syscall_trace_leave, p5; + jump .Lresume_userspace; +ENDPROC(_sys_trace) + +ENTRY(_resume) + /* + * Beware - when entering resume, prev (the current task) is + * in r0, next (the new task) is in r1. + */ + p0 = r0; + p1 = r1; + [--sp] = rets; + [--sp] = fp; + [--sp] = (r7:4, p5:3); + + /* save usp */ + p2 = usp; + [p0+(TASK_THREAD+THREAD_USP)] = p2; + + /* save current kernel stack pointer */ + [p0+(TASK_THREAD+THREAD_KSP)] = sp; + + /* save program counter */ + r1.l = _new_old_task; + r1.h = _new_old_task; + [p0+(TASK_THREAD+THREAD_PC)] = r1; + + /* restore the kernel stack pointer */ + sp = [p1+(TASK_THREAD+THREAD_KSP)]; + + /* restore user stack pointer */ + p0 = [p1+(TASK_THREAD+THREAD_USP)]; + usp = p0; + + /* restore pc */ + p0 = [p1+(TASK_THREAD+THREAD_PC)]; + jump (p0); + + /* + * Following code actually lands up in a new (old) task. + */ + +_new_old_task: + (r7:4, p5:3) = [sp++]; + fp = [sp++]; + rets = [sp++]; + + /* + * When we come out of resume, r0 carries "old" task, because we are + * in "new" task. + */ + rts; +ENDPROC(_resume) + +ENTRY(_ret_from_exception) +#ifdef CONFIG_IPIPE + p2.l = _ipipe_percpu_domain; + p2.h = _ipipe_percpu_domain; + r0.l = _ipipe_root; + r0.h = _ipipe_root; + r2 = [p2]; + cc = r0 == r2; + if !cc jump 4f; /* not on behalf of the root domain, get out */ +#endif /* CONFIG_IPIPE */ + p2.l = lo(IPEND); + p2.h = hi(IPEND); + + csync; + r0 = [p2]; + [sp + PT_IPEND] = r0; + +1: + r2 = LO(~0x37) (Z); + r0 = r2 & r0; + cc = r0 == 0; + if !cc jump 4f; /* if not return to user mode, get out */ + + /* Make sure any pending system call or deferred exception + * return in ILAT for this process to get executed, otherwise + * in case context switch happens, system call of + * first process (i.e in ILAT) will be carried + * forward to the switched process + */ + + p2.l = lo(ILAT); + p2.h = hi(ILAT); + r0 = [p2]; + r1 = (EVT_IVG14 | EVT_IVG15) (z); + r0 = r0 & r1; + cc = r0 == 0; + if !cc jump 5f; + + /* Set the stack for the current process */ + r7 = sp; + r4.l = lo(ALIGN_PAGE_MASK); + r4.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r4; /* thread_info->flags */ + p5 = r7; + r7 = [p5 + TI_FLAGS]; + r4.l = lo(_TIF_WORK_MASK); + r4.h = hi(_TIF_WORK_MASK); + r7 = r7 & r4; + cc = r7 == 0; + if cc jump 4f; + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _schedule_and_signal; + p1.h = _schedule_and_signal; + [p0] = p1; + csync; + raise 15; /* raise evt15 to do signal or reschedule */ +4: + r0 = syscfg; + bitclr(r0, SYSCFG_SSSTEP_P); /* Turn off single step */ + syscfg = r0; +5: + rts; +ENDPROC(_ret_from_exception) + +#if defined(CONFIG_PREEMPT) + +ENTRY(_up_to_irq14) +#if ANOMALY_05000281 || ANOMALY_05000461 + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); + reti = r0; +#endif + +#ifdef CONFIG_DEBUG_HWERR + /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */ + r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#else + /* Only enable irq14 interrupt, until we transition to _evt_evt14 */ + r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#endif + sti r0; + + p0.l = lo(EVT14); + p0.h = hi(EVT14); + p1.l = _evt_up_evt14; + p1.h = _evt_up_evt14; + [p0] = p1; + csync; + + raise 14; +1: + jump 1b; +ENDPROC(_up_to_irq14) + +ENTRY(_evt_up_evt14) +#ifdef CONFIG_DEBUG_HWERR + r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); + sti r0; +#else + cli r0; +#endif +#ifdef CONFIG_TRACE_IRQFLAGS + [--sp] = rets; + sp += -12; + call _trace_hardirqs_off; + sp += 12; + rets = [sp++]; +#endif + [--sp] = RETI; + SP += 4; + + /* restore normal evt14 */ + p0.l = lo(EVT14); + p0.h = hi(EVT14); + p1.l = _evt_evt14; + p1.h = _evt_evt14; + [p0] = p1; + csync; + + rts; +ENDPROC(_evt_up_evt14) + +#endif + +#ifdef CONFIG_IPIPE + +_resume_kernel_from_int: + r1 = LO(~0x8000) (Z); + r1 = r0 & r1; + r0 = 1; + r0 = r1 - r0; + r2 = r1 & r0; + cc = r2 == 0; + /* Sync the root stage only from the outer interrupt level. */ + if !cc jump .Lnosync; + r0.l = ___ipipe_sync_root; + r0.h = ___ipipe_sync_root; + [--sp] = reti; + [--sp] = rets; + [--sp] = ( r7:4, p5:3 ); + SP += -12; + call ___ipipe_call_irqtail + SP += 12; + ( r7:4, p5:3 ) = [sp++]; + rets = [sp++]; + reti = [sp++]; +.Lnosync: + rts +#elif defined(CONFIG_PREEMPT) + +_resume_kernel_from_int: + /* check preempt_count */ + r7 = sp; + r4.l = lo(ALIGN_PAGE_MASK); + r4.h = hi(ALIGN_PAGE_MASK); + r7 = r7 & r4; + p5 = r7; + r7 = [p5 + TI_PREEMPT]; + cc = r7 == 0x0; + if !cc jump .Lreturn_to_kernel; +.Lneed_schedule: + r7 = [p5 + TI_FLAGS]; + r4.l = lo(_TIF_WORK_MASK); + r4.h = hi(_TIF_WORK_MASK); + r7 = r7 & r4; + cc = BITTST(r7, TIF_NEED_RESCHED); + if !cc jump .Lreturn_to_kernel; + /* + * let schedule done at level 15, otherwise sheduled process will run + * at high level and block low level interrupt + */ + r6 = reti; /* save reti */ + r5.l = .Lkernel_schedule; + r5.h = .Lkernel_schedule; + reti = r5; + rti; +.Lkernel_schedule: + [--sp] = rets; + sp += -12; + pseudo_long_call _preempt_schedule_irq, p4; + sp += 12; + rets = [sp++]; + + [--sp] = rets; + sp += -12; + /* up to irq14 so that reti after restore_all can return to irq15(kernel) */ + pseudo_long_call _up_to_irq14, p4; + sp += 12; + rets = [sp++]; + + reti = r6; /* restore reti so that origin process can return to interrupted point */ + + jump .Lneed_schedule; +#else + +#define _resume_kernel_from_int .Lreturn_to_kernel +#endif + +ENTRY(_return_from_int) + /* If someone else already raised IRQ 15, do nothing. */ + csync; + p2.l = lo(ILAT); + p2.h = hi(ILAT); + r0 = [p2]; + cc = bittst (r0, EVT_IVG15_P); + if cc jump .Lreturn_to_kernel; + + /* if not return to user mode, get out */ + p2.l = lo(IPEND); + p2.h = hi(IPEND); + r0 = [p2]; + r1 = 0x17(Z); + r2 = ~r1; + r2.h = 0; + r0 = r2 & r0; + r1 = 1; + r1 = r0 - r1; + r2 = r0 & r1; + cc = r2 == 0; + if !cc jump _resume_kernel_from_int; + + /* Lower the interrupt level to 15. */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _schedule_and_signal_from_int; + p1.h = _schedule_and_signal_from_int; + [p0] = p1; + csync; +#if ANOMALY_05000281 || ANOMALY_05000461 + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); + reti = r0; +#endif + r0 = 0x801f (z); + STI r0; + raise 15; /* raise evt15 to do signal or reschedule */ + rti; +.Lreturn_to_kernel: + rts; +ENDPROC(_return_from_int) + +ENTRY(_lower_to_irq14) +#if ANOMALY_05000281 || ANOMALY_05000461 + r0.l = lo(SAFE_USER_INSTRUCTION); + r0.h = hi(SAFE_USER_INSTRUCTION); + reti = r0; +#endif + +#ifdef CONFIG_DEBUG_HWERR + /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */ + r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#else + /* Only enable irq14 interrupt, until we transition to _evt_evt14 */ + r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); +#endif + sti r0; + raise 14; + rti; +ENDPROC(_lower_to_irq14) + +ENTRY(_evt_evt14) +#ifdef CONFIG_DEBUG_HWERR + r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); + sti r0; +#else + cli r0; +#endif +#ifdef CONFIG_TRACE_IRQFLAGS + [--sp] = rets; + sp += -12; + call _trace_hardirqs_off; + sp += 12; + rets = [sp++]; +#endif + [--sp] = RETI; + SP += 4; + rts; +ENDPROC(_evt_evt14) + +ENTRY(_schedule_and_signal_from_int) + /* To end up here, vector 15 was changed - so we have to change it + * back. + */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _evt_system_call; + p1.h = _evt_system_call; + [p0] = p1; + csync; + + /* Set orig_p0 to -1 to indicate this isn't the end of a syscall. */ + r0 = -1 (x); + [sp + PT_ORIG_P0] = r0; + + p1 = rets; + [sp + PT_RESERVED] = p1; + +#ifdef CONFIG_TRACE_IRQFLAGS + /* trace_hardirqs_on() checks if all irqs are disabled. But here IRQ 15 + * is turned on, so disable all irqs. */ + cli r0; + sp += -12; + call _trace_hardirqs_on; + sp += 12; +#endif +#ifdef CONFIG_SMP + GET_PDA(p0, r0); /* Fetch current PDA (can't migrate to other CPU here) */ + r0 = [p0 + PDA_IRQFLAGS]; +#else + p0.l = _bfin_irq_flags; + p0.h = _bfin_irq_flags; + r0 = [p0]; +#endif + sti r0; + + /* finish the userspace "atomic" functions for it */ + r1 = FIXED_CODE_END; + r2 = [sp + PT_PC]; + cc = r1 <= r2; + if cc jump .Lresume_userspace (bp); + + r0 = sp; + sp += -12; + + pseudo_long_call _finish_atomic_sections, p5; + sp += 12; + jump.s .Lresume_userspace; +ENDPROC(_schedule_and_signal_from_int) + +ENTRY(_schedule_and_signal) + SAVE_CONTEXT_SYSCALL + /* To end up here, vector 15 was changed - so we have to change it + * back. + */ + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _evt_system_call; + p1.h = _evt_system_call; + [p0] = p1; + csync; + p0.l = 1f; + p0.h = 1f; + [sp + PT_RESERVED] = P0; + call .Lresume_userspace; +1: + RESTORE_CONTEXT + rti; +ENDPROC(_schedule_and_signal) + +/* We handle this 100% in exception space - to reduce overhead + * Only potiential problem is if the software buffer gets swapped out of the + * CPLB table - then double fault. - so we don't let this happen in other places + */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND +ENTRY(_ex_trace_buff_full) + [--sp] = P3; + [--sp] = P2; + [--sp] = LC0; + [--sp] = LT0; + [--sp] = LB0; + P5.L = _trace_buff_offset; + P5.H = _trace_buff_offset; + P3 = [P5]; /* trace_buff_offset */ + P5.L = lo(TBUFSTAT); + P5.H = hi(TBUFSTAT); + R7 = [P5]; + R7 <<= 1; /* double, since we need to read twice */ + LC0 = R7; + R7 <<= 2; /* need to shift over again, + * to get the number of bytes */ + P5.L = lo(TBUF); + P5.H = hi(TBUF); + R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1; + + P2 = R7; + P3 = P3 + P2; + R7 = P3; + R7 = R7 & R6; + P3 = R7; + P2.L = _trace_buff_offset; + P2.H = _trace_buff_offset; + [P2] = P3; + + P2.L = _software_trace_buff; + P2.H = _software_trace_buff; + + LSETUP (.Lstart, .Lend) LC0; +.Lstart: + R7 = [P5]; /* read TBUF */ + P4 = P3 + P2; + [P4] = R7; + P3 += -4; + R7 = P3; + R7 = R7 & R6; +.Lend: + P3 = R7; + + LB0 = [sp++]; + LT0 = [sp++]; + LC0 = [sp++]; + P2 = [sp++]; + P3 = [sp++]; + jump _bfin_return_from_exception; +ENDPROC(_ex_trace_buff_full) + +#if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4 +.data +#else +.section .l1.data.B +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */ +ENTRY(_trace_buff_offset) + .long 0; +ALIGN +ENTRY(_software_trace_buff) + .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256); + .long 0 + .endr +#endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */ + +#ifdef CONFIG_EARLY_PRINTK +__INIT +ENTRY(_early_trap) + SAVE_ALL_SYS + trace_buffer_stop(p0,r0); + + ANOMALY_283_315_WORKAROUND(p4, r5) + + /* Turn caches off, to ensure we don't get double exceptions */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */ + [P4] = R5; + SSYNC; + + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + CSYNC; /* Disabling of CPLBs should be proceeded by a CSYNC */ + [P4] = R5; + SSYNC; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + r1 = RETX; + + SP += -12; + call _early_trap_c; + SP += 12; +ENDPROC(_early_trap) +__FINIT +#endif /* CONFIG_EARLY_PRINTK */ + +/* + * Put these in the kernel data section - that should always be covered by + * a CPLB. This is needed to ensure we don't get double fault conditions + */ + +#ifdef CONFIG_SYSCALL_TAB_L1 +.section .l1.data +#else +.data +#endif + +ENTRY(_ex_table) + /* entry for each EXCAUSE[5:0] + * This table must be in sync with the table in ./kernel/traps.c + * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined + */ + .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ + .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */ +#ifdef CONFIG_KGDB + .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection + and break signal trap */ +#else + .long _ex_replaceable /* 0x02 - User Defined */ +#endif + .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ + .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */ + .long _ex_replaceable /* 0x05 - User Defined */ + .long _ex_replaceable /* 0x06 - User Defined */ + .long _ex_replaceable /* 0x07 - User Defined */ + .long _ex_replaceable /* 0x08 - User Defined */ + .long _ex_replaceable /* 0x09 - User Defined */ + .long _ex_replaceable /* 0x0A - User Defined */ + .long _ex_replaceable /* 0x0B - User Defined */ + .long _ex_replaceable /* 0x0C - User Defined */ + .long _ex_replaceable /* 0x0D - User Defined */ + .long _ex_replaceable /* 0x0E - User Defined */ + .long _ex_replaceable /* 0x0F - User Defined */ + .long _ex_single_step /* 0x10 - HW Single step */ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */ +#else + .long _ex_trap_c /* 0x11 - Trace Buffer Full */ +#endif + .long _ex_trap_c /* 0x12 - Reserved */ + .long _ex_trap_c /* 0x13 - Reserved */ + .long _ex_trap_c /* 0x14 - Reserved */ + .long _ex_trap_c /* 0x15 - Reserved */ + .long _ex_trap_c /* 0x16 - Reserved */ + .long _ex_trap_c /* 0x17 - Reserved */ + .long _ex_trap_c /* 0x18 - Reserved */ + .long _ex_trap_c /* 0x19 - Reserved */ + .long _ex_trap_c /* 0x1A - Reserved */ + .long _ex_trap_c /* 0x1B - Reserved */ + .long _ex_trap_c /* 0x1C - Reserved */ + .long _ex_trap_c /* 0x1D - Reserved */ + .long _ex_trap_c /* 0x1E - Reserved */ + .long _ex_trap_c /* 0x1F - Reserved */ + .long _ex_trap_c /* 0x20 - Reserved */ + .long _ex_trap_c /* 0x21 - Undefined Instruction */ + .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */ + .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */ + .long _ex_trap_c /* 0x24 - Data access misaligned */ + .long _ex_trap_c /* 0x25 - Unrecoverable Event */ + .long _ex_dmiss /* 0x26 - Data CPLB Miss */ + .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */ + .long _ex_trap_c /* 0x28 - Emulation Watchpoint */ + .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */ + .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */ + .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */ + .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */ + .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */ + .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ + .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ + .long _ex_trap_c /* 0x2F - Reserved */ + .long _ex_trap_c /* 0x30 - Reserved */ + .long _ex_trap_c /* 0x31 - Reserved */ + .long _ex_trap_c /* 0x32 - Reserved */ + .long _ex_trap_c /* 0x33 - Reserved */ + .long _ex_trap_c /* 0x34 - Reserved */ + .long _ex_trap_c /* 0x35 - Reserved */ + .long _ex_trap_c /* 0x36 - Reserved */ + .long _ex_trap_c /* 0x37 - Reserved */ + .long _ex_trap_c /* 0x38 - Reserved */ + .long _ex_trap_c /* 0x39 - Reserved */ + .long _ex_trap_c /* 0x3A - Reserved */ + .long _ex_trap_c /* 0x3B - Reserved */ + .long _ex_trap_c /* 0x3C - Reserved */ + .long _ex_trap_c /* 0x3D - Reserved */ + .long _ex_trap_c /* 0x3E - Reserved */ + .long _ex_trap_c /* 0x3F - Reserved */ +END(_ex_table) + +ENTRY(_sys_call_table) + .long _sys_restart_syscall /* 0 */ + .long _sys_exit + .long _sys_fork + .long _sys_read + .long _sys_write + .long _sys_open /* 5 */ + .long _sys_close + .long _sys_ni_syscall /* old waitpid */ + .long _sys_creat + .long _sys_link + .long _sys_unlink /* 10 */ + .long _sys_execve + .long _sys_chdir + .long _sys_time + .long _sys_mknod + .long _sys_chmod /* 15 */ + .long _sys_chown /* chown16 */ + .long _sys_ni_syscall /* old break syscall holder */ + .long _sys_ni_syscall /* old stat */ + .long _sys_lseek + .long _sys_getpid /* 20 */ + .long _sys_mount + .long _sys_ni_syscall /* old umount */ + .long _sys_setuid + .long _sys_getuid + .long _sys_stime /* 25 */ + .long _sys_ptrace + .long _sys_alarm + .long _sys_ni_syscall /* old fstat */ + .long _sys_pause + .long _sys_ni_syscall /* old utime */ /* 30 */ + .long _sys_ni_syscall /* old stty syscall holder */ + .long _sys_ni_syscall /* old gtty syscall holder */ + .long _sys_access + .long _sys_nice + .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long _sys_sync + .long _sys_kill + .long _sys_rename + .long _sys_mkdir + .long _sys_rmdir /* 40 */ + .long _sys_dup + .long _sys_pipe + .long _sys_times + .long _sys_ni_syscall /* old prof syscall holder */ + .long _sys_brk /* 45 */ + .long _sys_setgid + .long _sys_getgid + .long _sys_ni_syscall /* old sys_signal */ + .long _sys_geteuid /* geteuid16 */ + .long _sys_getegid /* getegid16 */ /* 50 */ + .long _sys_acct + .long _sys_umount /* recycled never used phys() */ + .long _sys_ni_syscall /* old lock syscall holder */ + .long _sys_ioctl + .long _sys_fcntl /* 55 */ + .long _sys_ni_syscall /* old mpx syscall holder */ + .long _sys_setpgid + .long _sys_ni_syscall /* old ulimit syscall holder */ + .long _sys_ni_syscall /* old old uname */ + .long _sys_umask /* 60 */ + .long _sys_chroot + .long _sys_ustat + .long _sys_dup2 + .long _sys_getppid + .long _sys_getpgrp /* 65 */ + .long _sys_setsid + .long _sys_ni_syscall /* old sys_sigaction */ + .long _sys_sgetmask + .long _sys_ssetmask + .long _sys_setreuid /* setreuid16 */ /* 70 */ + .long _sys_setregid /* setregid16 */ + .long _sys_ni_syscall /* old sys_sigsuspend */ + .long _sys_ni_syscall /* old sys_sigpending */ + .long _sys_sethostname + .long _sys_setrlimit /* 75 */ + .long _sys_ni_syscall /* old getrlimit */ + .long _sys_getrusage + .long _sys_gettimeofday + .long _sys_settimeofday + .long _sys_getgroups /* getgroups16 */ /* 80 */ + .long _sys_setgroups /* setgroups16 */ + .long _sys_ni_syscall /* old_select */ + .long _sys_symlink + .long _sys_ni_syscall /* old lstat */ + .long _sys_readlink /* 85 */ + .long _sys_uselib + .long _sys_ni_syscall /* sys_swapon */ + .long _sys_reboot + .long _sys_ni_syscall /* old_readdir */ + .long _sys_ni_syscall /* sys_mmap */ /* 90 */ + .long _sys_munmap + .long _sys_truncate + .long _sys_ftruncate + .long _sys_fchmod + .long _sys_fchown /* fchown16 */ /* 95 */ + .long _sys_getpriority + .long _sys_setpriority + .long _sys_ni_syscall /* old profil syscall holder */ + .long _sys_statfs + .long _sys_fstatfs /* 100 */ + .long _sys_ni_syscall + .long _sys_ni_syscall /* old sys_socketcall */ + .long _sys_syslog + .long _sys_setitimer + .long _sys_getitimer /* 105 */ + .long _sys_newstat + .long _sys_newlstat + .long _sys_newfstat + .long _sys_ni_syscall /* old uname */ + .long _sys_ni_syscall /* iopl for i386 */ /* 110 */ + .long _sys_vhangup + .long _sys_ni_syscall /* obsolete idle() syscall */ + .long _sys_ni_syscall /* vm86old for i386 */ + .long _sys_wait4 + .long _sys_ni_syscall /* 115 */ /* sys_swapoff */ + .long _sys_sysinfo + .long _sys_ni_syscall /* old sys_ipc */ + .long _sys_fsync + .long _sys_ni_syscall /* old sys_sigreturn */ + .long _sys_clone /* 120 */ + .long _sys_setdomainname + .long _sys_newuname + .long _sys_ni_syscall /* old sys_modify_ldt */ + .long _sys_adjtimex + .long _sys_mprotect /* 125 */ + .long _sys_ni_syscall /* old sys_sigprocmask */ + .long _sys_ni_syscall /* old "creat_module" */ + .long _sys_init_module + .long _sys_delete_module + .long _sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long _sys_quotactl + .long _sys_getpgid + .long _sys_fchdir + .long _sys_bdflush + .long _sys_ni_syscall /* 135 */ /* sys_sysfs */ + .long _sys_personality + .long _sys_ni_syscall /* for afs_syscall */ + .long _sys_setfsuid /* setfsuid16 */ + .long _sys_setfsgid /* setfsgid16 */ + .long _sys_llseek /* 140 */ + .long _sys_getdents + .long _sys_ni_syscall /* sys_select */ + .long _sys_flock + .long _sys_msync + .long _sys_readv /* 145 */ + .long _sys_writev + .long _sys_getsid + .long _sys_fdatasync + .long _sys_sysctl + .long _sys_mlock /* 150 */ + .long _sys_munlock + .long _sys_mlockall + .long _sys_munlockall + .long _sys_sched_setparam + .long _sys_sched_getparam /* 155 */ + .long _sys_sched_setscheduler + .long _sys_sched_getscheduler + .long _sys_sched_yield + .long _sys_sched_get_priority_max + .long _sys_sched_get_priority_min /* 160 */ + .long _sys_sched_rr_get_interval + .long _sys_nanosleep + .long _sys_mremap + .long _sys_setresuid /* setresuid16 */ + .long _sys_getresuid /* getresuid16 */ /* 165 */ + .long _sys_ni_syscall /* for vm86 */ + .long _sys_ni_syscall /* old "query_module" */ + .long _sys_ni_syscall /* sys_poll */ + .long _sys_ni_syscall /* old nfsservctl */ + .long _sys_setresgid /* setresgid16 */ /* 170 */ + .long _sys_getresgid /* getresgid16 */ + .long _sys_prctl + .long _sys_rt_sigreturn + .long _sys_rt_sigaction + .long _sys_rt_sigprocmask /* 175 */ + .long _sys_rt_sigpending + .long _sys_rt_sigtimedwait + .long _sys_rt_sigqueueinfo + .long _sys_rt_sigsuspend + .long _sys_pread64 /* 180 */ + .long _sys_pwrite64 + .long _sys_lchown /* lchown16 */ + .long _sys_getcwd + .long _sys_capget + .long _sys_capset /* 185 */ + .long _sys_sigaltstack + .long _sys_sendfile + .long _sys_ni_syscall /* streams1 */ + .long _sys_ni_syscall /* streams2 */ + .long _sys_vfork /* 190 */ + .long _sys_getrlimit + .long _sys_mmap_pgoff + .long _sys_truncate64 + .long _sys_ftruncate64 + .long _sys_stat64 /* 195 */ + .long _sys_lstat64 + .long _sys_fstat64 + .long _sys_chown + .long _sys_getuid + .long _sys_getgid /* 200 */ + .long _sys_geteuid + .long _sys_getegid + .long _sys_setreuid + .long _sys_setregid + .long _sys_getgroups /* 205 */ + .long _sys_setgroups + .long _sys_fchown + .long _sys_setresuid + .long _sys_getresuid + .long _sys_setresgid /* 210 */ + .long _sys_getresgid + .long _sys_lchown + .long _sys_setuid + .long _sys_setgid + .long _sys_setfsuid /* 215 */ + .long _sys_setfsgid + .long _sys_pivot_root + .long _sys_mincore + .long _sys_madvise + .long _sys_getdents64 /* 220 */ + .long _sys_fcntl64 + .long _sys_ni_syscall /* reserved for TUX */ + .long _sys_ni_syscall + .long _sys_gettid + .long _sys_readahead /* 225 */ + .long _sys_setxattr + .long _sys_lsetxattr + .long _sys_fsetxattr + .long _sys_getxattr + .long _sys_lgetxattr /* 230 */ + .long _sys_fgetxattr + .long _sys_listxattr + .long _sys_llistxattr + .long _sys_flistxattr + .long _sys_removexattr /* 235 */ + .long _sys_lremovexattr + .long _sys_fremovexattr + .long _sys_tkill + .long _sys_sendfile64 + .long _sys_futex /* 240 */ + .long _sys_sched_setaffinity + .long _sys_sched_getaffinity + .long _sys_ni_syscall /* sys_set_thread_area */ + .long _sys_ni_syscall /* sys_get_thread_area */ + .long _sys_io_setup /* 245 */ + .long _sys_io_destroy + .long _sys_io_getevents + .long _sys_io_submit + .long _sys_io_cancel + .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */ + .long _sys_ni_syscall /* sys_freec_hugepages */ + .long _sys_exit_group + .long _sys_lookup_dcookie + .long _sys_bfin_spinlock + .long _sys_epoll_create /* 255 */ + .long _sys_epoll_ctl + .long _sys_epoll_wait + .long _sys_ni_syscall /* remap_file_pages */ + .long _sys_set_tid_address + .long _sys_timer_create /* 260 */ + .long _sys_timer_settime + .long _sys_timer_gettime + .long _sys_timer_getoverrun + .long _sys_timer_delete + .long _sys_clock_settime /* 265 */ + .long _sys_clock_gettime + .long _sys_clock_getres + .long _sys_clock_nanosleep + .long _sys_statfs64 + .long _sys_fstatfs64 /* 270 */ + .long _sys_tgkill + .long _sys_utimes + .long _sys_fadvise64_64 + .long _sys_ni_syscall /* vserver */ + .long _sys_mbind /* 275 */ + .long _sys_ni_syscall /* get_mempolicy */ + .long _sys_ni_syscall /* set_mempolicy */ + .long _sys_mq_open + .long _sys_mq_unlink + .long _sys_mq_timedsend /* 280 */ + .long _sys_mq_timedreceive + .long _sys_mq_notify + .long _sys_mq_getsetattr + .long _sys_ni_syscall /* kexec_load */ + .long _sys_waitid /* 285 */ + .long _sys_add_key + .long _sys_request_key + .long _sys_keyctl + .long _sys_ioprio_set + .long _sys_ioprio_get /* 290 */ + .long _sys_inotify_init + .long _sys_inotify_add_watch + .long _sys_inotify_rm_watch + .long _sys_ni_syscall /* migrate_pages */ + .long _sys_openat /* 295 */ + .long _sys_mkdirat + .long _sys_mknodat + .long _sys_fchownat + .long _sys_futimesat + .long _sys_fstatat64 /* 300 */ + .long _sys_unlinkat + .long _sys_renameat + .long _sys_linkat + .long _sys_symlinkat + .long _sys_readlinkat /* 305 */ + .long _sys_fchmodat + .long _sys_faccessat + .long _sys_pselect6 + .long _sys_ppoll + .long _sys_unshare /* 310 */ + .long _sys_sram_alloc + .long _sys_sram_free + .long _sys_dma_memcpy + .long _sys_accept + .long _sys_bind /* 315 */ + .long _sys_connect + .long _sys_getpeername + .long _sys_getsockname + .long _sys_getsockopt + .long _sys_listen /* 320 */ + .long _sys_recv + .long _sys_recvfrom + .long _sys_recvmsg + .long _sys_send + .long _sys_sendmsg /* 325 */ + .long _sys_sendto + .long _sys_setsockopt + .long _sys_shutdown + .long _sys_socket + .long _sys_socketpair /* 330 */ + .long _sys_semctl + .long _sys_semget + .long _sys_semop + .long _sys_msgctl + .long _sys_msgget /* 335 */ + .long _sys_msgrcv + .long _sys_msgsnd + .long _sys_shmat + .long _sys_shmctl + .long _sys_shmdt /* 340 */ + .long _sys_shmget + .long _sys_splice + .long _sys_sync_file_range + .long _sys_tee + .long _sys_vmsplice /* 345 */ + .long _sys_epoll_pwait + .long _sys_utimensat + .long _sys_signalfd + .long _sys_timerfd_create + .long _sys_eventfd /* 350 */ + .long _sys_pread64 + .long _sys_pwrite64 + .long _sys_fadvise64 + .long _sys_set_robust_list + .long _sys_get_robust_list /* 355 */ + .long _sys_fallocate + .long _sys_semtimedop + .long _sys_timerfd_settime + .long _sys_timerfd_gettime + .long _sys_signalfd4 /* 360 */ + .long _sys_eventfd2 + .long _sys_epoll_create1 + .long _sys_dup3 + .long _sys_pipe2 + .long _sys_inotify_init1 /* 365 */ + .long _sys_preadv + .long _sys_pwritev + .long _sys_rt_tgsigqueueinfo + .long _sys_perf_event_open + .long _sys_recvmmsg /* 370 */ + .long _sys_fanotify_init + .long _sys_fanotify_mark + .long _sys_prlimit64 + .long _sys_cacheflush + .long _sys_name_to_handle_at /* 375 */ + .long _sys_open_by_handle_at + .long _sys_clock_adjtime + .long _sys_syncfs + .long _sys_setns + .long _sys_sendmmsg /* 380 */ + .long _sys_process_vm_readv + .long _sys_process_vm_writev + + .rept NR_syscalls-(.-_sys_call_table)/4 + .long _sys_ni_syscall + .endr +END(_sys_call_table) |