summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap/Kconfig')
-rw-r--r--arch/arm/plat-omap/Kconfig208
1 files changed, 208 insertions, 0 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
new file mode 100644
index 00000000..ad95c7a5
--- /dev/null
+++ b/arch/arm/plat-omap/Kconfig
@@ -0,0 +1,208 @@
+if ARCH_OMAP
+
+menu "TI OMAP Common Features"
+
+config ARCH_OMAP_OTG
+ bool
+
+choice
+ prompt "OMAP System Type"
+ default ARCH_OMAP2PLUS
+
+config ARCH_OMAP1
+ bool "TI OMAP1"
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ select HAVE_IDE
+ select NEED_MACH_MEMORY_H
+ select NEED_MACH_IO_H if PCCARD
+ help
+ "Systems based on omap7xx, omap15xx or omap16xx"
+
+config ARCH_OMAP2PLUS
+ bool "TI OMAP2/3/4"
+ select CLKDEV_LOOKUP
+ select GENERIC_IRQ_CHIP
+ select OMAP_DM_TIMER
+ select USE_OF
+ select PROC_DEVICETREE if PROC_FS
+ help
+ "Systems based on OMAP2, OMAP3 or OMAP4"
+
+endchoice
+
+comment "OMAP Feature Selections"
+
+config OMAP_DEBUG_DEVICES
+ bool
+ help
+ For debug cards on TI reference boards.
+
+config OMAP_DEBUG_LEDS
+ bool
+ depends on OMAP_DEBUG_DEVICES
+ default y if LEDS_CLASS
+
+config OMAP_SMARTREFLEX
+ bool "SmartReflex support"
+ depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+ help
+ Say Y if you want to enable SmartReflex.
+
+ SmartReflex can perform continuous dynamic voltage
+ scaling around the nominal operating point voltage
+ according to silicon characteristics and operating
+ conditions. Enabling SmartReflex reduces power
+ consumption.
+
+ Please note, that by default SmartReflex is only
+ initialized. To enable the automatic voltage
+ compensation for vdd mpu and vdd core from user space,
+ user must write 1 to
+ /debug/voltage/vdd_<X>/smartreflex/autocomp,
+ where X is mpu or core for OMAP3.
+ Optionally autocompensation can be enabled in the kernel
+ by default during system init via the enable_on_init flag
+ which an be passed as platform data to the smartreflex driver.
+
+config OMAP_SMARTREFLEX_CLASS3
+ bool "Class 3 mode of Smartreflex Implementation"
+ depends on OMAP_SMARTREFLEX && TWL4030_CORE
+ help
+ Say Y to enable Class 3 implementation of Smartreflex
+
+ Class 3 implementation of Smartreflex employs continuous hardware
+ voltage calibration.
+
+config OMAP_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_OMAP
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
+
+config OMAP_MUX
+ bool "OMAP multiplexing support"
+ depends on ARCH_OMAP
+ default y
+ help
+ Pin multiplexing support for OMAP boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config OMAP_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on OMAP_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config OMAP_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on OMAP_MUX
+ default y
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect OMAP_MUX for your product.
+
+config OMAP_MBOX_FWK
+ tristate "Mailbox framework support"
+ depends on ARCH_OMAP
+ help
+ Say Y here if you want to use OMAP Mailbox framework support for
+ DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+
+config OMAP_MBOX_KFIFO_SIZE
+ int "Mailbox kfifo default buffer size (bytes)"
+ depends on OMAP_MBOX_FWK
+ default 256
+ help
+ Specify the default size of mailbox's kfifo buffers (bytes).
+ This can also be changed at runtime (via the mbox_kfifo_size
+ module parameter).
+
+config OMAP_IOMMU_IVA2
+ bool
+
+config OMAP_MPU_TIMER
+ bool "Use mpu timer"
+ depends on ARCH_OMAP1
+ help
+ Select this option if you want to use the OMAP mpu timer. This
+ timer provides more intra-tick resolution than the 32KHz timer,
+ but consumes more power.
+
+config OMAP_32K_TIMER
+ bool "Use 32KHz timer"
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+ default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
+ help
+ Select this option if you want to enable the OMAP 32KHz timer.
+ This timer saves power compared to the OMAP_MPU_TIMER, and has
+ support for no tick during idle. The 32KHz timer provides less
+ intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
+
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+ depends on ARCH_OMAP3 && PM
+ default n
+ help
+ Without this option, L2 Auxiliary control register contents are
+ lost during off-mode entry on HS/EMU devices. This feature
+ requires support from PPA / boot-loader in HS/EMU devices, which
+ currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ int "Service ID for the support routine to set L2 AUX control"
+ depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ default 43
+ help
+ PPA routine service ID for setting L2 auxiliary control register.
+
+config OMAP_32K_TIMER_HZ
+ int "Kernel internal timer frequency for 32KHz timer"
+ range 32 1024
+ depends on OMAP_32K_TIMER
+ default "128"
+ help
+ Kernel internal timer frequency should be a divisor of 32768,
+ such as 64 or 128.
+
+config OMAP_DM_TIMER
+ bool "Use dual-mode timer"
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+ help
+ Select this option if you want to use OMAP Dual-Mode timers.
+
+config OMAP_SERIAL_WAKE
+ bool "Enable wake-up events for serial ports"
+ depends on ARCH_OMAP1 && OMAP_MUX
+ default y
+ help
+ Select this option if you want to have your system wake up
+ to data on the serial RX line. This allows you to wake the
+ system from serial console.
+
+choice
+ prompt "OMAP PM layer selection"
+ depends on ARCH_OMAP
+ default OMAP_PM_NOOP
+
+config OMAP_PM_NOOP
+ bool "No-op/debug PM layer"
+
+endchoice
+
+endmenu
+
+endif