diff options
Diffstat (limited to 'arch/arm/mach-davinci/clock.h')
| -rw-r--r-- | arch/arm/mach-davinci/clock.h | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h new file mode 100644 index 00000000..46f0f1bf --- /dev/null +++ b/arch/arm/mach-davinci/clock.h @@ -0,0 +1,135 @@ +/* + * TI DaVinci clock definitions + * + * Copyright (C) 2006-2007 Texas Instruments. + * Copyright (C) 2008-2009 Deep Root Systems, LLC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_DAVINCI_CLOCK_H +#define __ARCH_ARM_DAVINCI_CLOCK_H + +#define DAVINCI_PLL1_BASE 0x01c40800 +#define DAVINCI_PLL2_BASE 0x01c40c00 +#define MAX_PLL 2 + +/* PLL/Reset register offsets */ +#define PLLCTL 0x100 +#define PLLCTL_PLLEN BIT(0) +#define PLLCTL_PLLPWRDN BIT(1) +#define PLLCTL_PLLRST BIT(3) +#define PLLCTL_PLLDIS BIT(4) +#define PLLCTL_PLLENSRC BIT(5) +#define PLLCTL_CLKMODE BIT(8) + +#define PLLM 0x110 +#define PLLM_PLLM_MASK 0xff + +#define PREDIV 0x114 +#define PLLDIV1 0x118 +#define PLLDIV2 0x11c +#define PLLDIV3 0x120 +#define POSTDIV 0x128 +#define BPDIV 0x12c +#define PLLCMD 0x138 +#define PLLSTAT 0x13c +#define PLLALNCTL 0x140 +#define PLLDCHANGE 0x144 +#define PLLCKEN 0x148 +#define PLLCKSTAT 0x14c +#define PLLSYSTAT 0x150 +#define PLLDIV4 0x160 +#define PLLDIV5 0x164 +#define PLLDIV6 0x168 +#define PLLDIV7 0x16c +#define PLLDIV8 0x170 +#define PLLDIV9 0x174 +#define PLLDIV_EN BIT(15) +#define PLLDIV_RATIO_MASK 0x1f + +/* + * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN + * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us + * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input + * is ~25MHz. Units are micro seconds. + */ +#define PLL_BYPASS_TIME 1 +/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */ +#define PLL_RESET_TIME 1 +/* + * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4 + * Units are micro seconds. + */ +#define PLL_LOCK_TIME 20 + +#ifndef __ASSEMBLER__ + +#include <linux/list.h> +#include <linux/clkdev.h> + +#define PLLSTAT_GOSTAT BIT(0) +#define PLLCMD_GOSET BIT(0) + +struct pll_data { + u32 phys_base; + void __iomem *base; + u32 num; + u32 flags; + u32 input_rate; + u32 div_ratio_mask; +}; +#define PLL_HAS_PREDIV 0x01 +#define PLL_HAS_POSTDIV 0x02 + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + unsigned long rate; + unsigned long maxrate; /* H/W supported max rate */ + u8 usecount; + u8 lpsc; + u8 gpsc; + u8 domain; + u32 flags; + struct clk *parent; + struct list_head children; /* list of children */ + struct list_head childnode; /* parent's child list node */ + struct pll_data *pll_data; + u32 div_reg; + unsigned long (*recalc) (struct clk *); + int (*set_rate) (struct clk *clk, unsigned long rate); + int (*round_rate) (struct clk *clk, unsigned long rate); +}; + +/* Clock flags: SoC-specific flags start at BIT(16) */ +#define ALWAYS_ENABLED BIT(1) +#define CLK_PSC BIT(2) +#define CLK_PLL BIT(3) /* PLL-derived clock */ +#define PRE_PLL BIT(4) /* source is before PLL mult/div */ +#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */ +#define PSC_FORCE BIT(6) /* Force module state transtition */ + +#define CLK(dev, con, ck) \ + { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + } \ + +int davinci_clk_init(struct clk_lookup *clocks); +int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, + unsigned int mult, unsigned int postdiv); +int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); +int davinci_set_refclk_rate(unsigned long rate); +int davinci_simple_set_rate(struct clk *clk, unsigned long rate); + +extern struct platform_device davinci_wdt_device; +extern void davinci_watchdog_reset(struct platform_device *); + +#endif + +#endif |