diff options
Diffstat (limited to 'ANDROID_3.4.5/sound/soc/atmel/atmel_ssc_dai.c')
| -rw-r--r-- | ANDROID_3.4.5/sound/soc/atmel/atmel_ssc_dai.c | 867 |
1 files changed, 0 insertions, 867 deletions
diff --git a/ANDROID_3.4.5/sound/soc/atmel/atmel_ssc_dai.c b/ANDROID_3.4.5/sound/soc/atmel/atmel_ssc_dai.c deleted file mode 100644 index 354341ec..00000000 --- a/ANDROID_3.4.5/sound/soc/atmel/atmel_ssc_dai.c +++ /dev/null @@ -1,867 +0,0 @@ -/* - * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver - * - * Copyright (C) 2005 SAN People - * Copyright (C) 2008 Atmel - * - * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> - * ATMEL CORP. - * - * Based on at91-ssc.c by - * Frank Mandarino <fmandarino@endrelia.com> - * Based on pxa2xx Platform drivers by - * Liam Girdwood <lrg@slimlogic.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> - -#include <linux/atmel-ssc.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> - -#include "atmel-pcm.h" -#include "atmel_ssc_dai.h" - - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#define NUM_SSC_DEVICES 1 -#else -#define NUM_SSC_DEVICES 3 -#endif - -/* - * SSC PDC registers required by the PCM DMA engine. - */ -static struct atmel_pdc_regs pdc_tx_reg = { - .xpr = ATMEL_PDC_TPR, - .xcr = ATMEL_PDC_TCR, - .xnpr = ATMEL_PDC_TNPR, - .xncr = ATMEL_PDC_TNCR, -}; - -static struct atmel_pdc_regs pdc_rx_reg = { - .xpr = ATMEL_PDC_RPR, - .xcr = ATMEL_PDC_RCR, - .xnpr = ATMEL_PDC_RNPR, - .xncr = ATMEL_PDC_RNCR, -}; - -/* - * SSC & PDC status bits for transmit and receive. - */ -static struct atmel_ssc_mask ssc_tx_mask = { - .ssc_enable = SSC_BIT(CR_TXEN), - .ssc_disable = SSC_BIT(CR_TXDIS), - .ssc_endx = SSC_BIT(SR_ENDTX), - .ssc_endbuf = SSC_BIT(SR_TXBUFE), - .pdc_enable = ATMEL_PDC_TXTEN, - .pdc_disable = ATMEL_PDC_TXTDIS, -}; - -static struct atmel_ssc_mask ssc_rx_mask = { - .ssc_enable = SSC_BIT(CR_RXEN), - .ssc_disable = SSC_BIT(CR_RXDIS), - .ssc_endx = SSC_BIT(SR_ENDRX), - .ssc_endbuf = SSC_BIT(SR_RXBUFF), - .pdc_enable = ATMEL_PDC_RXTEN, - .pdc_disable = ATMEL_PDC_RXTDIS, -}; - - -/* - * DMA parameters. - */ -static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - {{ - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - } }, -#if NUM_SSC_DEVICES == 3 - {{ - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - } }, - {{ - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - } }, -#endif -}; - - -static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -#endif -}; - - -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA - * interrupt handler in the PCM driver. - */ -static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) -{ - struct atmel_ssc_info *ssc_p = dev_id; - struct atmel_pcm_dma_params *dma_params; - u32 ssc_sr; - u32 ssc_substream_mask; - int i; - - ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) - & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); - - /* - * Loop through the substreams attached to this SSC. If - * a DMA-related interrupt occurred on that substream, call - * the DMA interrupt handler function, if one has been - * registered in the dma_params structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if ((dma_params != NULL) && - (dma_params->dma_intr_handler != NULL)) { - ssc_substream_mask = (dma_params->mask->ssc_endx | - dma_params->mask->ssc_endbuf); - if (ssc_sr & ssc_substream_mask) { - dma_params->dma_intr_handler(ssc_sr, - dma_params-> - substream); - } - } - } - - return IRQ_HANDLED; -} - - -/*-------------------------------------------------------------------------*\ - * DAI functions -\*-------------------------------------------------------------------------*/ -/* - * Startup. Only that one substream allowed in each direction. - */ -static int atmel_ssc_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; - int dir_mask; - - pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", - ssc_readl(ssc_p->ssc->regs, SR)); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dir_mask = SSC_DIR_MASK_PLAYBACK; - else - dir_mask = SSC_DIR_MASK_CAPTURE; - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void atmel_ssc_shutdown(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; - struct atmel_pcm_dma_params *dma_params; - int dir, dir_mask; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dir = 0; - else - dir = 1; - - dma_params = ssc_p->dma_params[dir]; - - if (dma_params != NULL) { - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); - pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", - (dir ? "receive" : "transmit"), - ssc_readl(ssc_p->ssc->regs, SR)); - - dma_params->ssc = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[dir] = NULL; - } - - dir_mask = 1 << dir; - - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - if (ssc_p->initialized) { - /* Shutdown the SSC clock. */ - pr_debug("atmel_ssc_dau: Stopping clock\n"); - clk_disable(ssc_p->ssc->clk); - - free_irq(ssc_p->ssc->irq, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - /* Clear the SSC dividers */ - ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - - -/* - * Record the DAI format for use in hw_params(). - */ -static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - -/* - * Record SSC clock dividers for use in hw_params(). - */ -static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case ATMEL_SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value. - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else - if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case ATMEL_SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case ATMEL_SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * Configure the SSC. - */ -static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); - int id = dai->id; - struct atmel_ssc_info *ssc_p = &ssc_info[id]; - struct atmel_pcm_dma_params *dma_params; - int dir, channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - /* - * Currently, there is only one set of dma params for - * each direction. If more are added, this code will - * have to be changed to select the proper set. - */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dir = 0; - else - dir = 1; - - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The snd_soc_pcm_stream->dma_data field is only used to communicate - * the appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - snd_soc_dai_set_dma_data(rtd->cpu_dai, substream, dma_params); - - channels = params_channels(params); - - /* - * Determine sample size in bits and the PDC increment. - */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - case SNDRV_PCM_FORMAT_S24_LE: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - case SNDRV_PCM_FORMAT_S32_LE: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - default: - printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); - return -EINVAL; - } - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S - && bits > 16) { - printk(KERN_WARNING - "atmel_ssc_dai: sample size %d " - "is too large for I2S\n", bits); - return -EINVAL; - } - - /* - * Compute SSC register settings. - */ - switch (ssc_p->daifmt - & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated - * from the MCK divider, and the BCLK signal - * is output on the SSC TK line. - */ - rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) - | SSC_BF(RCMR_STTDLY, START_DELAY) - | SSC_BF(RCMR_START, SSC_START_FALLING_RF) - | SSC_BF(RCMR_CKI, SSC_CKI_RISING) - | SSC_BF(RCMR_CKO, SSC_CKO_NONE) - | SSC_BF(RCMR_CKS, SSC_CKS_DIV); - - rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) - | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) - | SSC_BF(RFMR_FSLEN, (bits - 1)) - | SSC_BF(RFMR_DATNB, (channels - 1)) - | SSC_BIT(RFMR_MSBF) - | SSC_BF(RFMR_LOOP, 0) - | SSC_BF(RFMR_DATLEN, (bits - 1)); - - tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) - | SSC_BF(TCMR_STTDLY, START_DELAY) - | SSC_BF(TCMR_START, SSC_START_FALLING_RF) - | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) - | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) - | SSC_BF(TCMR_CKS, SSC_CKS_DIV); - - tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) - | SSC_BF(TFMR_FSDEN, 0) - | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) - | SSC_BF(TFMR_FSLEN, (bits - 1)) - | SSC_BF(TFMR_DATNB, (channels - 1)) - | SSC_BIT(TFMR_MSBF) - | SSC_BF(TFMR_DATDEF, 0) - | SSC_BF(TFMR_DATLEN, (bits - 1)); - break; - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clocks. - * - * The SSC transmit clock is obtained from the BCLK signal on - * on the TK line, and the SSC receive clock is - * generated from the transmit clock. - * - * For single channel data, one sample is transferred - * on the falling edge of the LRC clock. - * For two channel data, one sample is - * transferred on both edges of the LRC clock. - */ - start_event = ((channels == 1) - ? SSC_START_FALLING_RF - : SSC_START_EDGE_RF); - - rcmr = SSC_BF(RCMR_PERIOD, 0) - | SSC_BF(RCMR_STTDLY, START_DELAY) - | SSC_BF(RCMR_START, start_event) - | SSC_BF(RCMR_CKI, SSC_CKI_RISING) - | SSC_BF(RCMR_CKO, SSC_CKO_NONE) - | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); - - rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) - | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) - | SSC_BF(RFMR_FSLEN, 0) - | SSC_BF(RFMR_DATNB, 0) - | SSC_BIT(RFMR_MSBF) - | SSC_BF(RFMR_LOOP, 0) - | SSC_BF(RFMR_DATLEN, (bits - 1)); - - tcmr = SSC_BF(TCMR_PERIOD, 0) - | SSC_BF(TCMR_STTDLY, START_DELAY) - | SSC_BF(TCMR_START, start_event) - | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) - | SSC_BF(TCMR_CKO, SSC_CKO_NONE) - | SSC_BF(TCMR_CKS, SSC_CKS_PIN); - - tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) - | SSC_BF(TFMR_FSDEN, 0) - | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) - | SSC_BF(TFMR_FSLEN, 0) - | SSC_BF(TFMR_DATNB, 0) - | SSC_BIT(TFMR_MSBF) - | SSC_BF(TFMR_DATDEF, 0) - | SSC_BF(TFMR_DATLEN, (bits - 1)); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output - * on the SSC TK line. - */ - rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) - | SSC_BF(RCMR_STTDLY, 1) - | SSC_BF(RCMR_START, SSC_START_RISING_RF) - | SSC_BF(RCMR_CKI, SSC_CKI_RISING) - | SSC_BF(RCMR_CKO, SSC_CKO_NONE) - | SSC_BF(RCMR_CKS, SSC_CKS_DIV); - - rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) - | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) - | SSC_BF(RFMR_FSLEN, 0) - | SSC_BF(RFMR_DATNB, (channels - 1)) - | SSC_BIT(RFMR_MSBF) - | SSC_BF(RFMR_LOOP, 0) - | SSC_BF(RFMR_DATLEN, (bits - 1)); - - tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) - | SSC_BF(TCMR_STTDLY, 1) - | SSC_BF(TCMR_START, SSC_START_RISING_RF) - | SSC_BF(TCMR_CKI, SSC_CKI_RISING) - | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) - | SSC_BF(TCMR_CKS, SSC_CKS_DIV); - - tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) - | SSC_BF(TFMR_FSDEN, 0) - | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) - | SSC_BF(TFMR_FSLEN, 0) - | SSC_BF(TFMR_DATNB, (channels - 1)) - | SSC_BIT(TFMR_MSBF) - | SSC_BF(TFMR_DATDEF, 0) - | SSC_BF(TFMR_DATLEN, (bits - 1)); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", - ssc_p->daifmt); - return -EINVAL; - } - pr_debug("atmel_ssc_hw_params: " - "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", - rcmr, rfmr, tcmr, tfmr); - - if (!ssc_p->initialized) { - - /* Enable PMC peripheral clock for this SSC */ - pr_debug("atmel_ssc_dai: Starting clock\n"); - clk_enable(ssc_p->ssc->clk); - - /* Reset the SSC and its PDC registers */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); - - ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); - - ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, - ssc_p->name, ssc_p); - if (ret < 0) { - printk(KERN_WARNING - "atmel_ssc_dai: request_irq failure\n"); - pr_debug("Atmel_ssc_dai: Stoping clock\n"); - clk_disable(ssc_p->ssc->clk); - return ret; - } - - ssc_p->initialized = 1; - } - - /* set SSC clock mode register */ - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); - - /* set transmit clock mode and format */ - ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); - ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); - - pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); - return 0; -} - - -static int atmel_ssc_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; - struct atmel_pcm_dma_params *dma_params; - int dir; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dir = 0; - else - dir = 1; - - dma_params = ssc_p->dma_params[dir]; - - ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); - - pr_debug("%s enabled SSC_SR=0x%08x\n", - dir ? "receive" : "transmit", - ssc_readl(ssc_p->ssc->regs, SR)); - return 0; -} - - -#ifdef CONFIG_PM -static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) -{ - struct atmel_ssc_info *ssc_p; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive */ - ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); - - /* Save the current interrupt mask, then disable unmasked interrupts */ - ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); - ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); - ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); - ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); - ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); - ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); - - return 0; -} - - - -static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) -{ - struct atmel_ssc_info *ssc_p; - u32 cr; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* restore SSC register settings */ - ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); - ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); - ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); - - /* re-enable interrupts */ - ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - - /* Re-enable receive and transmit as appropriate */ - cr = 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; - ssc_writel(ssc_p->ssc->regs, CR, cr); - - return 0; -} -#else /* CONFIG_PM */ -# define atmel_ssc_suspend NULL -# define atmel_ssc_resume NULL -#endif /* CONFIG_PM */ - -static int atmel_ssc_probe(struct snd_soc_dai *dai) -{ - struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; - int ret = 0; - - snd_soc_dai_set_drvdata(dai, ssc_p); - - /* - * Request SSC device - */ - ssc_p->ssc = ssc_request(dai->id); - if (IS_ERR(ssc_p->ssc)) { - printk(KERN_ERR "ASoC: Failed to request SSC %d\n", dai->id); - ret = PTR_ERR(ssc_p->ssc); - } - - return ret; -} - -static int atmel_ssc_remove(struct snd_soc_dai *dai) -{ - struct atmel_ssc_info *ssc_p = snd_soc_dai_get_drvdata(dai); - - ssc_free(ssc_p->ssc); - return 0; -} - -#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) - -#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) - -static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { - .startup = atmel_ssc_startup, - .shutdown = atmel_ssc_shutdown, - .prepare = atmel_ssc_prepare, - .hw_params = atmel_ssc_hw_params, - .set_fmt = atmel_ssc_set_dai_fmt, - .set_clkdiv = atmel_ssc_set_dai_clkdiv, -}; - -static struct snd_soc_dai_driver atmel_ssc_dai[NUM_SSC_DEVICES] = { - { - .name = "atmel-ssc-dai.0", - .probe = atmel_ssc_probe, - .remove = atmel_ssc_remove, - .suspend = atmel_ssc_suspend, - .resume = atmel_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = ATMEL_SSC_RATES, - .formats = ATMEL_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = ATMEL_SSC_RATES, - .formats = ATMEL_SSC_FORMATS,}, - .ops = &atmel_ssc_dai_ops, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "atmel-ssc-dai.1", - .probe = atmel_ssc_probe, - .remove = atmel_ssc_remove, - .suspend = atmel_ssc_suspend, - .resume = atmel_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = ATMEL_SSC_RATES, - .formats = ATMEL_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = ATMEL_SSC_RATES, - .formats = ATMEL_SSC_FORMATS,}, - .ops = &atmel_ssc_dai_ops, - }, - { - .name = "atmel-ssc-dai.2", - .probe = atmel_ssc_probe, - .remove = atmel_ssc_remove, - .suspend = atmel_ssc_suspend, - .resume = atmel_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = ATMEL_SSC_RATES, - .formats = ATMEL_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = ATMEL_SSC_RATES, - .formats = ATMEL_SSC_FORMATS,}, - .ops = &atmel_ssc_dai_ops, - }, -#endif -}; - -static __devinit int asoc_ssc_probe(struct platform_device *pdev) -{ - BUG_ON(pdev->id < 0); - BUG_ON(pdev->id >= ARRAY_SIZE(atmel_ssc_dai)); - return snd_soc_register_dai(&pdev->dev, &atmel_ssc_dai[pdev->id]); -} - -static int __devexit asoc_ssc_remove(struct platform_device *pdev) -{ - snd_soc_unregister_dai(&pdev->dev); - return 0; -} - -static struct platform_driver asoc_ssc_driver = { - .driver = { - .name = "atmel-ssc-dai", - .owner = THIS_MODULE, - }, - - .probe = asoc_ssc_probe, - .remove = __devexit_p(asoc_ssc_remove), -}; - -/** - * atmel_ssc_set_audio - Allocate the specified SSC for audio use. - */ -int atmel_ssc_set_audio(int ssc_id) -{ - struct ssc_device *ssc; - static struct platform_device *dma_pdev; - struct platform_device *ssc_pdev; - int ret; - - if (ssc_id < 0 || ssc_id >= ARRAY_SIZE(atmel_ssc_dai)) - return -EINVAL; - - /* Allocate a dummy device for DMA if we don't have one already */ - if (!dma_pdev) { - dma_pdev = platform_device_alloc("atmel-pcm-audio", -1); - if (!dma_pdev) - return -ENOMEM; - - ret = platform_device_add(dma_pdev); - if (ret < 0) { - platform_device_put(dma_pdev); - dma_pdev = NULL; - return ret; - } - } - - ssc_pdev = platform_device_alloc("atmel-ssc-dai", ssc_id); - if (!ssc_pdev) - return -ENOMEM; - - /* If we can grab the SSC briefly to parent the DAI device off it */ - ssc = ssc_request(ssc_id); - if (IS_ERR(ssc)) - pr_warn("Unable to parent ASoC SSC DAI on SSC: %ld\n", - PTR_ERR(ssc)); - else { - ssc_pdev->dev.parent = &(ssc->pdev->dev); - ssc_free(ssc); - } - - ret = platform_device_add(ssc_pdev); - if (ret < 0) - platform_device_put(ssc_pdev); - - return ret; -} -EXPORT_SYMBOL_GPL(atmel_ssc_set_audio); - -module_platform_driver(asoc_ssc_driver); - -/* Module information */ -MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); -MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); -MODULE_LICENSE("GPL"); |