diff options
Diffstat (limited to 'ANDROID_3.4.5/include/scsi/scsi.h')
| -rw-r--r-- | ANDROID_3.4.5/include/scsi/scsi.h | 565 |
1 files changed, 0 insertions, 565 deletions
diff --git a/ANDROID_3.4.5/include/scsi/scsi.h b/ANDROID_3.4.5/include/scsi/scsi.h deleted file mode 100644 index f34a5a87..00000000 --- a/ANDROID_3.4.5/include/scsi/scsi.h +++ /dev/null @@ -1,565 +0,0 @@ -/* - * This header file contains public constants and structures used by - * the scsi code for linux. - * - * For documentation on the OPCODES, MESSAGES, and SENSE values, - * please consult the SCSI standard. - */ -#ifndef _SCSI_SCSI_H -#define _SCSI_SCSI_H - -#include <linux/types.h> -#include <linux/scatterlist.h> - -struct scsi_cmnd; - -/* - * The maximum number of SG segments that we will put inside a - * scatterlist (unless chaining is used). Should ideally fit inside a - * single page, to avoid a higher order allocation. We could define this - * to SG_MAX_SINGLE_ALLOC to pack correctly at the highest order. The - * minimum value is 32 - */ -#define SCSI_MAX_SG_SEGMENTS 128 - -/* - * Like SCSI_MAX_SG_SEGMENTS, but for archs that have sg chaining. This limit - * is totally arbitrary, a setting of 2048 will get you at least 8mb ios. - */ -#ifdef ARCH_HAS_SG_CHAIN -#define SCSI_MAX_SG_CHAIN_SEGMENTS 2048 -#else -#define SCSI_MAX_SG_CHAIN_SEGMENTS SCSI_MAX_SG_SEGMENTS -#endif - -/* - * DIX-capable adapters effectively support infinite chaining for the - * protection information scatterlist - */ -#define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF - -/* - * Special value for scanning to specify scanning or rescanning of all - * possible channels, (target) ids, or luns on a given shost. - */ -#define SCAN_WILD_CARD ~0 - -/* - * SCSI opcodes - */ - -#define TEST_UNIT_READY 0x00 -#define REZERO_UNIT 0x01 -#define REQUEST_SENSE 0x03 -#define FORMAT_UNIT 0x04 -#define READ_BLOCK_LIMITS 0x05 -#define REASSIGN_BLOCKS 0x07 -#define INITIALIZE_ELEMENT_STATUS 0x07 -#define READ_6 0x08 -#define WRITE_6 0x0a -#define SEEK_6 0x0b -#define READ_REVERSE 0x0f -#define WRITE_FILEMARKS 0x10 -#define SPACE 0x11 -#define INQUIRY 0x12 -#define RECOVER_BUFFERED_DATA 0x14 -#define MODE_SELECT 0x15 -#define RESERVE 0x16 -#define RELEASE 0x17 -#define COPY 0x18 -#define ERASE 0x19 -#define MODE_SENSE 0x1a -#define START_STOP 0x1b -#define RECEIVE_DIAGNOSTIC 0x1c -#define SEND_DIAGNOSTIC 0x1d -#define ALLOW_MEDIUM_REMOVAL 0x1e - -#define READ_FORMAT_CAPACITIES 0x23 -#define SET_WINDOW 0x24 -#define READ_CAPACITY 0x25 -#define READ_10 0x28 -#define WRITE_10 0x2a -#define SEEK_10 0x2b -#define POSITION_TO_ELEMENT 0x2b -#define WRITE_VERIFY 0x2e -#define VERIFY 0x2f -#define SEARCH_HIGH 0x30 -#define SEARCH_EQUAL 0x31 -#define SEARCH_LOW 0x32 -#define SET_LIMITS 0x33 -#define PRE_FETCH 0x34 -#define READ_POSITION 0x34 -#define SYNCHRONIZE_CACHE 0x35 -#define LOCK_UNLOCK_CACHE 0x36 -#define READ_DEFECT_DATA 0x37 -#define MEDIUM_SCAN 0x38 -#define COMPARE 0x39 -#define COPY_VERIFY 0x3a -#define WRITE_BUFFER 0x3b -#define READ_BUFFER 0x3c -#define UPDATE_BLOCK 0x3d -#define READ_LONG 0x3e -#define WRITE_LONG 0x3f -#define CHANGE_DEFINITION 0x40 -#define WRITE_SAME 0x41 -#define UNMAP 0x42 -#define READ_TOC 0x43 -#define READ_HEADER 0x44 -#define GET_EVENT_STATUS_NOTIFICATION 0x4a -#define LOG_SELECT 0x4c -#define LOG_SENSE 0x4d -#define XDWRITEREAD_10 0x53 -#define MODE_SELECT_10 0x55 -#define RESERVE_10 0x56 -#define RELEASE_10 0x57 -#define MODE_SENSE_10 0x5a -#define PERSISTENT_RESERVE_IN 0x5e -#define PERSISTENT_RESERVE_OUT 0x5f -#define VARIABLE_LENGTH_CMD 0x7f -#define REPORT_LUNS 0xa0 -#define SECURITY_PROTOCOL_IN 0xa2 -#define MAINTENANCE_IN 0xa3 -#define MAINTENANCE_OUT 0xa4 -#define MOVE_MEDIUM 0xa5 -#define EXCHANGE_MEDIUM 0xa6 -#define READ_12 0xa8 -#define WRITE_12 0xaa -#define READ_MEDIA_SERIAL_NUMBER 0xab -#define WRITE_VERIFY_12 0xae -#define VERIFY_12 0xaf -#define SEARCH_HIGH_12 0xb0 -#define SEARCH_EQUAL_12 0xb1 -#define SEARCH_LOW_12 0xb2 -#define SECURITY_PROTOCOL_OUT 0xb5 -#define READ_ELEMENT_STATUS 0xb8 -#define SEND_VOLUME_TAG 0xb6 -#define WRITE_LONG_2 0xea -#define EXTENDED_COPY 0x83 -#define RECEIVE_COPY_RESULTS 0x84 -#define ACCESS_CONTROL_IN 0x86 -#define ACCESS_CONTROL_OUT 0x87 -#define READ_16 0x88 -#define WRITE_16 0x8a -#define READ_ATTRIBUTE 0x8c -#define WRITE_ATTRIBUTE 0x8d -#define VERIFY_16 0x8f -#define SYNCHRONIZE_CACHE_16 0x91 -#define WRITE_SAME_16 0x93 -#define SERVICE_ACTION_IN 0x9e -/* values for service action in */ -#define SAI_READ_CAPACITY_16 0x10 -#define SAI_GET_LBA_STATUS 0x12 -/* values for VARIABLE_LENGTH_CMD service action codes - * see spc4r17 Section D.3.5, table D.7 and D.8 */ -#define VLC_SA_RECEIVE_CREDENTIAL 0x1800 -/* values for maintenance in */ -#define MI_REPORT_IDENTIFYING_INFORMATION 0x05 -#define MI_REPORT_TARGET_PGS 0x0a -#define MI_REPORT_ALIASES 0x0b -#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c -#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d -#define MI_REPORT_PRIORITY 0x0e -#define MI_REPORT_TIMESTAMP 0x0f -#define MI_MANAGEMENT_PROTOCOL_IN 0x10 -/* values for maintenance out */ -#define MO_SET_IDENTIFYING_INFORMATION 0x06 -#define MO_SET_TARGET_PGS 0x0a -#define MO_CHANGE_ALIASES 0x0b -#define MO_SET_PRIORITY 0x0e -#define MO_SET_TIMESTAMP 0x0f -#define MO_MANAGEMENT_PROTOCOL_OUT 0x10 -/* values for variable length command */ -#define XDREAD_32 0x03 -#define XDWRITE_32 0x04 -#define XPWRITE_32 0x06 -#define XDWRITEREAD_32 0x07 -#define READ_32 0x09 -#define VERIFY_32 0x0a -#define WRITE_32 0x0b -#define WRITE_SAME_32 0x0d - -/* Values for T10/04-262r7 */ -#define ATA_16 0x85 /* 16-byte pass-thru */ -#define ATA_12 0xa1 /* 12-byte pass-thru */ - -/* - * SCSI command lengths - */ - -#define SCSI_MAX_VARLEN_CDB_SIZE 260 - -/* defined in T10 SCSI Primary Commands-2 (SPC2) */ -struct scsi_varlen_cdb_hdr { - __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */ - __u8 control; - __u8 misc[5]; - __u8 additional_cdb_length; /* total cdb length - 8 */ - __be16 service_action; - /* service specific data follows */ -}; - -static inline unsigned -scsi_varlen_cdb_length(const void *hdr) -{ - return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8; -} - -extern const unsigned char scsi_command_size_tbl[8]; -#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7] - -static inline unsigned -scsi_command_size(const unsigned char *cmnd) -{ - return (cmnd[0] == VARIABLE_LENGTH_CMD) ? - scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]); -} - -/* - * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft - * T10/1561-D Revision 4 Draft dated 7th November 2002. - */ -#define SAM_STAT_GOOD 0x00 -#define SAM_STAT_CHECK_CONDITION 0x02 -#define SAM_STAT_CONDITION_MET 0x04 -#define SAM_STAT_BUSY 0x08 -#define SAM_STAT_INTERMEDIATE 0x10 -#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 -#define SAM_STAT_RESERVATION_CONFLICT 0x18 -#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ -#define SAM_STAT_TASK_SET_FULL 0x28 -#define SAM_STAT_ACA_ACTIVE 0x30 -#define SAM_STAT_TASK_ABORTED 0x40 - -/** scsi_status_is_good - check the status return. - * - * @status: the status passed up from the driver (including host and - * driver components) - * - * This returns true for known good conditions that may be treated as - * command completed normally - */ -static inline int scsi_status_is_good(int status) -{ - /* - * FIXME: bit0 is listed as reserved in SCSI-2, but is - * significant in SCSI-3. For now, we follow the SCSI-2 - * behaviour and ignore reserved bits. - */ - status &= 0xfe; - return ((status == SAM_STAT_GOOD) || - (status == SAM_STAT_INTERMEDIATE) || - (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) || - /* FIXME: this is obsolete in SAM-3 */ - (status == SAM_STAT_COMMAND_TERMINATED)); -} - -/* - * Status codes. These are deprecated as they are shifted 1 bit right - * from those found in the SCSI standards. This causes confusion for - * applications that are ported to several OSes. Prefer SAM Status codes - * above. - */ - -#define GOOD 0x00 -#define CHECK_CONDITION 0x01 -#define CONDITION_GOOD 0x02 -#define BUSY 0x04 -#define INTERMEDIATE_GOOD 0x08 -#define INTERMEDIATE_C_GOOD 0x0a -#define RESERVATION_CONFLICT 0x0c -#define COMMAND_TERMINATED 0x11 -#define QUEUE_FULL 0x14 -#define ACA_ACTIVE 0x18 -#define TASK_ABORTED 0x20 - -#define STATUS_MASK 0xfe - -/* - * SENSE KEYS - */ - -#define NO_SENSE 0x00 -#define RECOVERED_ERROR 0x01 -#define NOT_READY 0x02 -#define MEDIUM_ERROR 0x03 -#define HARDWARE_ERROR 0x04 -#define ILLEGAL_REQUEST 0x05 -#define UNIT_ATTENTION 0x06 -#define DATA_PROTECT 0x07 -#define BLANK_CHECK 0x08 -#define COPY_ABORTED 0x0a -#define ABORTED_COMMAND 0x0b -#define VOLUME_OVERFLOW 0x0d -#define MISCOMPARE 0x0e - - -/* - * DEVICE TYPES - * Please keep them in 0x%02x format for $MODALIAS to work - */ - -#define TYPE_DISK 0x00 -#define TYPE_TAPE 0x01 -#define TYPE_PRINTER 0x02 -#define TYPE_PROCESSOR 0x03 /* HP scanners use this */ -#define TYPE_WORM 0x04 /* Treated as ROM by our system */ -#define TYPE_ROM 0x05 -#define TYPE_SCANNER 0x06 -#define TYPE_MOD 0x07 /* Magneto-optical disk - - * - treated as TYPE_DISK */ -#define TYPE_MEDIUM_CHANGER 0x08 -#define TYPE_COMM 0x09 /* Communications device */ -#define TYPE_RAID 0x0c -#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */ -#define TYPE_RBC 0x0e -#define TYPE_OSD 0x11 -#define TYPE_NO_LUN 0x7f - -/* SCSI protocols; these are taken from SPC-3 section 7.5 */ -enum scsi_protocol { - SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */ - SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */ - SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */ - SCSI_PROTOCOL_SBP = 3, /* firewire */ - SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */ - SCSI_PROTOCOL_ISCSI = 5, - SCSI_PROTOCOL_SAS = 6, - SCSI_PROTOCOL_ADT = 7, /* Media Changers */ - SCSI_PROTOCOL_ATA = 8, - SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */ -}; - -/* Returns a human-readable name for the device */ -extern const char * scsi_device_type(unsigned type); - -/* - * standard mode-select header prepended to all mode-select commands - */ - -struct ccs_modesel_head { - __u8 _r1; /* reserved */ - __u8 medium; /* device-specific medium type */ - __u8 _r2; /* reserved */ - __u8 block_desc_length; /* block descriptor length */ - __u8 density; /* device-specific density code */ - __u8 number_blocks_hi; /* number of blocks in this block desc */ - __u8 number_blocks_med; - __u8 number_blocks_lo; - __u8 _r3; - __u8 block_length_hi; /* block length for blocks in this desc */ - __u8 block_length_med; - __u8 block_length_lo; -}; - -/* - * ScsiLun: 8 byte LUN. - */ -struct scsi_lun { - __u8 scsi_lun[8]; -}; - -/* - * The Well Known LUNS (SAM-3) in our int representation of a LUN - */ -#define SCSI_W_LUN_BASE 0xc100 -#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) -#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) -#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) - -static inline int scsi_is_wlun(unsigned int lun) -{ - return (lun & 0xff00) == SCSI_W_LUN_BASE; -} - - -/* - * MESSAGE CODES - */ - -#define COMMAND_COMPLETE 0x00 -#define EXTENDED_MESSAGE 0x01 -#define EXTENDED_MODIFY_DATA_POINTER 0x00 -#define EXTENDED_SDTR 0x01 -#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ -#define EXTENDED_WDTR 0x03 -#define EXTENDED_PPR 0x04 -#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05 -#define SAVE_POINTERS 0x02 -#define RESTORE_POINTERS 0x03 -#define DISCONNECT 0x04 -#define INITIATOR_ERROR 0x05 -#define ABORT_TASK_SET 0x06 -#define MESSAGE_REJECT 0x07 -#define NOP 0x08 -#define MSG_PARITY_ERROR 0x09 -#define LINKED_CMD_COMPLETE 0x0a -#define LINKED_FLG_CMD_COMPLETE 0x0b -#define TARGET_RESET 0x0c -#define ABORT_TASK 0x0d -#define CLEAR_TASK_SET 0x0e -#define INITIATE_RECOVERY 0x0f /* SCSI-II only */ -#define RELEASE_RECOVERY 0x10 /* SCSI-II only */ -#define CLEAR_ACA 0x16 -#define LOGICAL_UNIT_RESET 0x17 -#define SIMPLE_QUEUE_TAG 0x20 -#define HEAD_OF_QUEUE_TAG 0x21 -#define ORDERED_QUEUE_TAG 0x22 -#define IGNORE_WIDE_RESIDUE 0x23 -#define ACA 0x24 -#define QAS_REQUEST 0x55 - -/* Old SCSI2 names, don't use in new code */ -#define BUS_DEVICE_RESET TARGET_RESET -#define ABORT ABORT_TASK_SET - -/* - * Host byte codes - */ - -#define DID_OK 0x00 /* NO error */ -#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */ -#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */ -#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */ -#define DID_BAD_TARGET 0x04 /* BAD target. */ -#define DID_ABORT 0x05 /* Told to abort for some other reason */ -#define DID_PARITY 0x06 /* Parity error */ -#define DID_ERROR 0x07 /* Internal error */ -#define DID_RESET 0x08 /* Reset by somebody. */ -#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */ -#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */ -#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */ -#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */ -#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also - * without decrementing the retry count */ -#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution - * and the driver blocked the port to - * recover the link. Transport class will - * retry or fail IO */ -#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */ -#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on - * other paths */ -#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other - * paths might yield different results */ -#define DRIVER_OK 0x00 /* Driver status */ - -/* - * These indicate the error that occurred, and what is available. - */ - -#define DRIVER_BUSY 0x01 -#define DRIVER_SOFT 0x02 -#define DRIVER_MEDIA 0x03 -#define DRIVER_ERROR 0x04 - -#define DRIVER_INVALID 0x05 -#define DRIVER_TIMEOUT 0x06 -#define DRIVER_HARD 0x07 -#define DRIVER_SENSE 0x08 - -/* - * Internal return values. - */ - -#define NEEDS_RETRY 0x2001 -#define SUCCESS 0x2002 -#define FAILED 0x2003 -#define QUEUED 0x2004 -#define SOFT_ERROR 0x2005 -#define ADD_TO_MLQUEUE 0x2006 -#define TIMEOUT_ERROR 0x2007 -#define SCSI_RETURN_NOT_HANDLED 0x2008 -#define FAST_IO_FAIL 0x2009 -#define TARGET_ERROR 0x200A - -/* - * Midlevel queue return values. - */ -#define SCSI_MLQUEUE_HOST_BUSY 0x1055 -#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056 -#define SCSI_MLQUEUE_EH_RETRY 0x1057 -#define SCSI_MLQUEUE_TARGET_BUSY 0x1058 - -/* - * Use these to separate status msg and our bytes - * - * These are set by: - * - * status byte = set from target device - * msg_byte = return status from host adapter itself. - * host_byte = set by low-level driver to indicate status. - * driver_byte = set by mid-level. - */ -#define status_byte(result) (((result) >> 1) & 0x7f) -#define msg_byte(result) (((result) >> 8) & 0xff) -#define host_byte(result) (((result) >> 16) & 0xff) -#define driver_byte(result) (((result) >> 24) & 0xff) - -#define sense_class(sense) (((sense) >> 4) & 0x7) -#define sense_error(sense) ((sense) & 0xf) -#define sense_valid(sense) ((sense) & 0x80) - -/* - * default timeouts -*/ -#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) -#define START_STOP_TIMEOUT (60 * HZ) -#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) -#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) -#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) - - -#define IDENTIFY_BASE 0x80 -#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ - ((can_disconnect) ? 0x40 : 0) |\ - ((lun) & 0x07)) - -/* - * struct scsi_device::scsi_level values. For SCSI devices other than those - * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1) - * where "resp" is a byte array of the response to an INQUIRY. The scsi_level - * variable is visible to the user via sysfs. - */ - -#define SCSI_UNKNOWN 0 -#define SCSI_1 1 -#define SCSI_1_CCS 2 -#define SCSI_2 3 -#define SCSI_3 4 /* SPC */ -#define SCSI_SPC_2 5 -#define SCSI_SPC_3 6 - -/* - * INQ PERIPHERAL QUALIFIERS - */ -#define SCSI_INQ_PQ_CON 0x00 -#define SCSI_INQ_PQ_NOT_CON 0x01 -#define SCSI_INQ_PQ_NOT_CAP 0x03 - - -/* - * Here are some scsi specific ioctl commands which are sometimes useful. - * - * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 - */ - -/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */ -#define SCSI_IOCTL_GET_IDLUN 0x5382 - -/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */ - -/* Used to obtain the host number of a device. */ -#define SCSI_IOCTL_PROBE_HOST 0x5385 - -/* Used to obtain the bus number for a device */ -#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 - -/* Used to obtain the PCI location of a device */ -#define SCSI_IOCTL_GET_PCI 0x5387 - -/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */ -static inline __u32 scsi_to_u32(__u8 *ptr) -{ - return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3]; -} - -#endif /* _SCSI_SCSI_H */ |