diff options
Diffstat (limited to 'ANDROID_3.4.5/fs/ext3')
25 files changed, 0 insertions, 18190 deletions
diff --git a/ANDROID_3.4.5/fs/ext3/Kconfig b/ANDROID_3.4.5/fs/ext3/Kconfig deleted file mode 100644 index e8c6ba0e..00000000 --- a/ANDROID_3.4.5/fs/ext3/Kconfig +++ /dev/null @@ -1,89 +0,0 @@ -config EXT3_FS - tristate "Ext3 journalling file system support" - select JBD - help - This is the journalling version of the Second extended file system - (often called ext3), the de facto standard Linux file system - (method to organize files on a storage device) for hard disks. - - The journalling code included in this driver means you do not have - to run e2fsck (file system checker) on your file systems after a - crash. The journal keeps track of any changes that were being made - at the time the system crashed, and can ensure that your file system - is consistent without the need for a lengthy check. - - Other than adding the journal to the file system, the on-disk format - of ext3 is identical to ext2. It is possible to freely switch - between using the ext3 driver and the ext2 driver, as long as the - file system has been cleanly unmounted, or e2fsck is run on the file - system. - - To add a journal on an existing ext2 file system or change the - behavior of ext3 file systems, you can use the tune2fs utility ("man - tune2fs"). To modify attributes of files and directories on ext3 - file systems, use chattr ("man chattr"). You need to be using - e2fsprogs version 1.20 or later in order to create ext3 journals - (available at <http://sourceforge.net/projects/e2fsprogs/>). - - To compile this file system support as a module, choose M here: the - module will be called ext3. - -config EXT3_DEFAULTS_TO_ORDERED - bool "Default to 'data=ordered' in ext3" - depends on EXT3_FS - default y - help - The journal mode options for ext3 have different tradeoffs - between when data is guaranteed to be on disk and - performance. The use of "data=writeback" can cause - unwritten data to appear in files after an system crash or - power failure, which can be a security issue. However, - "data=ordered" mode can also result in major performance - problems, including seconds-long delays before an fsync() - call returns. For details, see: - - http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs - - If you have been historically happy with ext3's performance, - data=ordered mode will be a safe choice and you should - answer 'y' here. If you understand the reliability and data - privacy issues of data=writeback and are willing to make - that trade off, answer 'n'. - -config EXT3_FS_XATTR - bool "Ext3 extended attributes" - depends on EXT3_FS - default y - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - - You need this for POSIX ACL support on ext3. - -config EXT3_FS_POSIX_ACL - bool "Ext3 POSIX Access Control Lists" - depends on EXT3_FS_XATTR - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config EXT3_FS_SECURITY - bool "Ext3 Security Labels" - depends on EXT3_FS_XATTR - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the ext3 filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. diff --git a/ANDROID_3.4.5/fs/ext3/Makefile b/ANDROID_3.4.5/fs/ext3/Makefile deleted file mode 100644 index e77766a8..00000000 --- a/ANDROID_3.4.5/fs/ext3/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the linux ext3-filesystem routines. -# - -obj-$(CONFIG_EXT3_FS) += ext3.o - -ext3-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \ - ioctl.o namei.o super.o symlink.o hash.o resize.o ext3_jbd.o - -ext3-$(CONFIG_EXT3_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o -ext3-$(CONFIG_EXT3_FS_POSIX_ACL) += acl.o -ext3-$(CONFIG_EXT3_FS_SECURITY) += xattr_security.o diff --git a/ANDROID_3.4.5/fs/ext3/acl.c b/ANDROID_3.4.5/fs/ext3/acl.c deleted file mode 100644 index c76832c8..00000000 --- a/ANDROID_3.4.5/fs/ext3/acl.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * linux/fs/ext3/acl.c - * - * Copyright (C) 2001-2003 Andreas Gruenbacher, <agruen@suse.de> - */ - -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -/* - * Convert from filesystem to in-memory representation. - */ -static struct posix_acl * -ext3_acl_from_disk(const void *value, size_t size) -{ - const char *end = (char *)value + size; - int n, count; - struct posix_acl *acl; - - if (!value) - return NULL; - if (size < sizeof(ext3_acl_header)) - return ERR_PTR(-EINVAL); - if (((ext3_acl_header *)value)->a_version != - cpu_to_le32(EXT3_ACL_VERSION)) - return ERR_PTR(-EINVAL); - value = (char *)value + sizeof(ext3_acl_header); - count = ext3_acl_count(size); - if (count < 0) - return ERR_PTR(-EINVAL); - if (count == 0) - return NULL; - acl = posix_acl_alloc(count, GFP_NOFS); - if (!acl) - return ERR_PTR(-ENOMEM); - for (n=0; n < count; n++) { - ext3_acl_entry *entry = - (ext3_acl_entry *)value; - if ((char *)value + sizeof(ext3_acl_entry_short) > end) - goto fail; - acl->a_entries[n].e_tag = le16_to_cpu(entry->e_tag); - acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - value = (char *)value + - sizeof(ext3_acl_entry_short); - acl->a_entries[n].e_id = ACL_UNDEFINED_ID; - break; - - case ACL_USER: - case ACL_GROUP: - value = (char *)value + sizeof(ext3_acl_entry); - if ((char *)value > end) - goto fail; - acl->a_entries[n].e_id = - le32_to_cpu(entry->e_id); - break; - - default: - goto fail; - } - } - if (value != end) - goto fail; - return acl; - -fail: - posix_acl_release(acl); - return ERR_PTR(-EINVAL); -} - -/* - * Convert from in-memory to filesystem representation. - */ -static void * -ext3_acl_to_disk(const struct posix_acl *acl, size_t *size) -{ - ext3_acl_header *ext_acl; - char *e; - size_t n; - - *size = ext3_acl_size(acl->a_count); - ext_acl = kmalloc(sizeof(ext3_acl_header) + acl->a_count * - sizeof(ext3_acl_entry), GFP_NOFS); - if (!ext_acl) - return ERR_PTR(-ENOMEM); - ext_acl->a_version = cpu_to_le32(EXT3_ACL_VERSION); - e = (char *)ext_acl + sizeof(ext3_acl_header); - for (n=0; n < acl->a_count; n++) { - ext3_acl_entry *entry = (ext3_acl_entry *)e; - entry->e_tag = cpu_to_le16(acl->a_entries[n].e_tag); - entry->e_perm = cpu_to_le16(acl->a_entries[n].e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER: - case ACL_GROUP: - entry->e_id = - cpu_to_le32(acl->a_entries[n].e_id); - e += sizeof(ext3_acl_entry); - break; - - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - e += sizeof(ext3_acl_entry_short); - break; - - default: - goto fail; - } - } - return (char *)ext_acl; - -fail: - kfree(ext_acl); - return ERR_PTR(-EINVAL); -} - -/* - * Inode operation get_posix_acl(). - * - * inode->i_mutex: don't care - */ -struct posix_acl * -ext3_get_acl(struct inode *inode, int type) -{ - int name_index; - char *value = NULL; - struct posix_acl *acl; - int retval; - - if (!test_opt(inode->i_sb, POSIX_ACL)) - return NULL; - - acl = get_cached_acl(inode, type); - if (acl != ACL_NOT_CACHED) - return acl; - - switch (type) { - case ACL_TYPE_ACCESS: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_ACCESS; - break; - case ACL_TYPE_DEFAULT: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT; - break; - default: - BUG(); - } - - retval = ext3_xattr_get(inode, name_index, "", NULL, 0); - if (retval > 0) { - value = kmalloc(retval, GFP_NOFS); - if (!value) - return ERR_PTR(-ENOMEM); - retval = ext3_xattr_get(inode, name_index, "", value, retval); - } - if (retval > 0) - acl = ext3_acl_from_disk(value, retval); - else if (retval == -ENODATA || retval == -ENOSYS) - acl = NULL; - else - acl = ERR_PTR(retval); - kfree(value); - - if (!IS_ERR(acl)) - set_cached_acl(inode, type, acl); - - return acl; -} - -/* - * Set the access or default ACL of an inode. - * - * inode->i_mutex: down unless called from ext3_new_inode - */ -static int -ext3_set_acl(handle_t *handle, struct inode *inode, int type, - struct posix_acl *acl) -{ - int name_index; - void *value = NULL; - size_t size = 0; - int error; - - if (S_ISLNK(inode->i_mode)) - return -EOPNOTSUPP; - - switch(type) { - case ACL_TYPE_ACCESS: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_ACCESS; - if (acl) { - error = posix_acl_equiv_mode(acl, &inode->i_mode); - if (error < 0) - return error; - else { - inode->i_ctime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, inode); - if (error == 0) - acl = NULL; - } - } - break; - - case ACL_TYPE_DEFAULT: - name_index = EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT; - if (!S_ISDIR(inode->i_mode)) - return acl ? -EACCES : 0; - break; - - default: - return -EINVAL; - } - if (acl) { - value = ext3_acl_to_disk(acl, &size); - if (IS_ERR(value)) - return (int)PTR_ERR(value); - } - - error = ext3_xattr_set_handle(handle, inode, name_index, "", - value, size, 0); - - kfree(value); - - if (!error) - set_cached_acl(inode, type, acl); - - return error; -} - -/* - * Initialize the ACLs of a new inode. Called from ext3_new_inode. - * - * dir->i_mutex: down - * inode->i_mutex: up (access to inode is still exclusive) - */ -int -ext3_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) -{ - struct posix_acl *acl = NULL; - int error = 0; - - if (!S_ISLNK(inode->i_mode)) { - if (test_opt(dir->i_sb, POSIX_ACL)) { - acl = ext3_get_acl(dir, ACL_TYPE_DEFAULT); - if (IS_ERR(acl)) - return PTR_ERR(acl); - } - if (!acl) - inode->i_mode &= ~current_umask(); - } - if (test_opt(inode->i_sb, POSIX_ACL) && acl) { - if (S_ISDIR(inode->i_mode)) { - error = ext3_set_acl(handle, inode, - ACL_TYPE_DEFAULT, acl); - if (error) - goto cleanup; - } - error = posix_acl_create(&acl, GFP_NOFS, &inode->i_mode); - if (error < 0) - return error; - - if (error > 0) { - /* This is an extended ACL */ - error = ext3_set_acl(handle, inode, ACL_TYPE_ACCESS, acl); - } - } -cleanup: - posix_acl_release(acl); - return error; -} - -/* - * Does chmod for an inode that may have an Access Control List. The - * inode->i_mode field must be updated to the desired value by the caller - * before calling this function. - * Returns 0 on success, or a negative error number. - * - * We change the ACL rather than storing some ACL entries in the file - * mode permission bits (which would be more efficient), because that - * would break once additional permissions (like ACL_APPEND, ACL_DELETE - * for directories) are added. There are no more bits available in the - * file mode. - * - * inode->i_mutex: down - */ -int -ext3_acl_chmod(struct inode *inode) -{ - struct posix_acl *acl; - handle_t *handle; - int retries = 0; - int error; - - if (S_ISLNK(inode->i_mode)) - return -EOPNOTSUPP; - if (!test_opt(inode->i_sb, POSIX_ACL)) - return 0; - acl = ext3_get_acl(inode, ACL_TYPE_ACCESS); - if (IS_ERR(acl) || !acl) - return PTR_ERR(acl); - error = posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode); - if (error) - return error; -retry: - handle = ext3_journal_start(inode, - EXT3_DATA_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - ext3_std_error(inode->i_sb, error); - goto out; - } - error = ext3_set_acl(handle, inode, ACL_TYPE_ACCESS, acl); - ext3_journal_stop(handle); - if (error == -ENOSPC && - ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; -out: - posix_acl_release(acl); - return error; -} - -/* - * Extended attribute handlers - */ -static size_t -ext3_xattr_list_acl_access(struct dentry *dentry, char *list, size_t list_len, - const char *name, size_t name_len, int type) -{ - const size_t size = sizeof(POSIX_ACL_XATTR_ACCESS); - - if (!test_opt(dentry->d_sb, POSIX_ACL)) - return 0; - if (list && size <= list_len) - memcpy(list, POSIX_ACL_XATTR_ACCESS, size); - return size; -} - -static size_t -ext3_xattr_list_acl_default(struct dentry *dentry, char *list, size_t list_len, - const char *name, size_t name_len, int type) -{ - const size_t size = sizeof(POSIX_ACL_XATTR_DEFAULT); - - if (!test_opt(dentry->d_sb, POSIX_ACL)) - return 0; - if (list && size <= list_len) - memcpy(list, POSIX_ACL_XATTR_DEFAULT, size); - return size; -} - -static int -ext3_xattr_get_acl(struct dentry *dentry, const char *name, void *buffer, - size_t size, int type) -{ - struct posix_acl *acl; - int error; - - if (strcmp(name, "") != 0) - return -EINVAL; - if (!test_opt(dentry->d_sb, POSIX_ACL)) - return -EOPNOTSUPP; - - acl = ext3_get_acl(dentry->d_inode, type); - if (IS_ERR(acl)) - return PTR_ERR(acl); - if (acl == NULL) - return -ENODATA; - error = posix_acl_to_xattr(acl, buffer, size); - posix_acl_release(acl); - - return error; -} - -static int -ext3_xattr_set_acl(struct dentry *dentry, const char *name, const void *value, - size_t size, int flags, int type) -{ - struct inode *inode = dentry->d_inode; - handle_t *handle; - struct posix_acl *acl; - int error, retries = 0; - - if (strcmp(name, "") != 0) - return -EINVAL; - if (!test_opt(inode->i_sb, POSIX_ACL)) - return -EOPNOTSUPP; - if (!inode_owner_or_capable(inode)) - return -EPERM; - - if (value) { - acl = posix_acl_from_xattr(value, size); - if (IS_ERR(acl)) - return PTR_ERR(acl); - else if (acl) { - error = posix_acl_valid(acl); - if (error) - goto release_and_out; - } - } else - acl = NULL; - -retry: - handle = ext3_journal_start(inode, EXT3_DATA_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - error = ext3_set_acl(handle, inode, type, acl); - ext3_journal_stop(handle); - if (error == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - -release_and_out: - posix_acl_release(acl); - return error; -} - -const struct xattr_handler ext3_xattr_acl_access_handler = { - .prefix = POSIX_ACL_XATTR_ACCESS, - .flags = ACL_TYPE_ACCESS, - .list = ext3_xattr_list_acl_access, - .get = ext3_xattr_get_acl, - .set = ext3_xattr_set_acl, -}; - -const struct xattr_handler ext3_xattr_acl_default_handler = { - .prefix = POSIX_ACL_XATTR_DEFAULT, - .flags = ACL_TYPE_DEFAULT, - .list = ext3_xattr_list_acl_default, - .get = ext3_xattr_get_acl, - .set = ext3_xattr_set_acl, -}; diff --git a/ANDROID_3.4.5/fs/ext3/acl.h b/ANDROID_3.4.5/fs/ext3/acl.h deleted file mode 100644 index dbc921e4..00000000 --- a/ANDROID_3.4.5/fs/ext3/acl.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - File: fs/ext3/acl.h - - (C) 2001 Andreas Gruenbacher, <a.gruenbacher@computer.org> -*/ - -#include <linux/posix_acl_xattr.h> - -#define EXT3_ACL_VERSION 0x0001 - -typedef struct { - __le16 e_tag; - __le16 e_perm; - __le32 e_id; -} ext3_acl_entry; - -typedef struct { - __le16 e_tag; - __le16 e_perm; -} ext3_acl_entry_short; - -typedef struct { - __le32 a_version; -} ext3_acl_header; - -static inline size_t ext3_acl_size(int count) -{ - if (count <= 4) { - return sizeof(ext3_acl_header) + - count * sizeof(ext3_acl_entry_short); - } else { - return sizeof(ext3_acl_header) + - 4 * sizeof(ext3_acl_entry_short) + - (count - 4) * sizeof(ext3_acl_entry); - } -} - -static inline int ext3_acl_count(size_t size) -{ - ssize_t s; - size -= sizeof(ext3_acl_header); - s = size - 4 * sizeof(ext3_acl_entry_short); - if (s < 0) { - if (size % sizeof(ext3_acl_entry_short)) - return -1; - return size / sizeof(ext3_acl_entry_short); - } else { - if (s % sizeof(ext3_acl_entry)) - return -1; - return s / sizeof(ext3_acl_entry) + 4; - } -} - -#ifdef CONFIG_EXT3_FS_POSIX_ACL - -/* acl.c */ -extern struct posix_acl *ext3_get_acl(struct inode *inode, int type); -extern int ext3_acl_chmod (struct inode *); -extern int ext3_init_acl (handle_t *, struct inode *, struct inode *); - -#else /* CONFIG_EXT3_FS_POSIX_ACL */ -#include <linux/sched.h> -#define ext3_get_acl NULL - -static inline int -ext3_acl_chmod(struct inode *inode) -{ - return 0; -} - -static inline int -ext3_init_acl(handle_t *handle, struct inode *inode, struct inode *dir) -{ - return 0; -} -#endif /* CONFIG_EXT3_FS_POSIX_ACL */ - diff --git a/ANDROID_3.4.5/fs/ext3/balloc.c b/ANDROID_3.4.5/fs/ext3/balloc.c deleted file mode 100644 index baac1b12..00000000 --- a/ANDROID_3.4.5/fs/ext3/balloc.c +++ /dev/null @@ -1,2159 +0,0 @@ -/* - * linux/fs/ext3/balloc.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * Enhanced block allocation by Stephen Tweedie (sct@redhat.com), 1993 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - */ - -#include <linux/quotaops.h> -#include <linux/blkdev.h> -#include "ext3.h" - -/* - * balloc.c contains the blocks allocation and deallocation routines - */ - -/* - * The free blocks are managed by bitmaps. A file system contains several - * blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap - * block for inodes, N blocks for the inode table and data blocks. - * - * The file system contains group descriptors which are located after the - * super block. Each descriptor contains the number of the bitmap block and - * the free blocks count in the block. The descriptors are loaded in memory - * when a file system is mounted (see ext3_fill_super). - */ - - -#define in_range(b, first, len) ((b) >= (first) && (b) <= (first) + (len) - 1) - -/* - * Calculate the block group number and offset, given a block number - */ -static void ext3_get_group_no_and_offset(struct super_block *sb, - ext3_fsblk_t blocknr, unsigned long *blockgrpp, ext3_grpblk_t *offsetp) -{ - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - - blocknr = blocknr - le32_to_cpu(es->s_first_data_block); - if (offsetp) - *offsetp = blocknr % EXT3_BLOCKS_PER_GROUP(sb); - if (blockgrpp) - *blockgrpp = blocknr / EXT3_BLOCKS_PER_GROUP(sb); -} - -/** - * ext3_get_group_desc() -- load group descriptor from disk - * @sb: super block - * @block_group: given block group - * @bh: pointer to the buffer head to store the block - * group descriptor - */ -struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, - unsigned int block_group, - struct buffer_head ** bh) -{ - unsigned long group_desc; - unsigned long offset; - struct ext3_group_desc * desc; - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (block_group >= sbi->s_groups_count) { - ext3_error (sb, "ext3_get_group_desc", - "block_group >= groups_count - " - "block_group = %d, groups_count = %lu", - block_group, sbi->s_groups_count); - - return NULL; - } - smp_rmb(); - - group_desc = block_group >> EXT3_DESC_PER_BLOCK_BITS(sb); - offset = block_group & (EXT3_DESC_PER_BLOCK(sb) - 1); - if (!sbi->s_group_desc[group_desc]) { - ext3_error (sb, "ext3_get_group_desc", - "Group descriptor not loaded - " - "block_group = %d, group_desc = %lu, desc = %lu", - block_group, group_desc, offset); - return NULL; - } - - desc = (struct ext3_group_desc *) sbi->s_group_desc[group_desc]->b_data; - if (bh) - *bh = sbi->s_group_desc[group_desc]; - return desc + offset; -} - -static int ext3_valid_block_bitmap(struct super_block *sb, - struct ext3_group_desc *desc, - unsigned int block_group, - struct buffer_head *bh) -{ - ext3_grpblk_t offset; - ext3_grpblk_t next_zero_bit; - ext3_fsblk_t bitmap_blk; - ext3_fsblk_t group_first_block; - - group_first_block = ext3_group_first_block_no(sb, block_group); - - /* check whether block bitmap block number is set */ - bitmap_blk = le32_to_cpu(desc->bg_block_bitmap); - offset = bitmap_blk - group_first_block; - if (!ext3_test_bit(offset, bh->b_data)) - /* bad block bitmap */ - goto err_out; - - /* check whether the inode bitmap block number is set */ - bitmap_blk = le32_to_cpu(desc->bg_inode_bitmap); - offset = bitmap_blk - group_first_block; - if (!ext3_test_bit(offset, bh->b_data)) - /* bad block bitmap */ - goto err_out; - - /* check whether the inode table block number is set */ - bitmap_blk = le32_to_cpu(desc->bg_inode_table); - offset = bitmap_blk - group_first_block; - next_zero_bit = ext3_find_next_zero_bit(bh->b_data, - offset + EXT3_SB(sb)->s_itb_per_group, - offset); - if (next_zero_bit >= offset + EXT3_SB(sb)->s_itb_per_group) - /* good bitmap for inode tables */ - return 1; - -err_out: - ext3_error(sb, __func__, - "Invalid block bitmap - " - "block_group = %d, block = %lu", - block_group, bitmap_blk); - return 0; -} - -/** - * read_block_bitmap() - * @sb: super block - * @block_group: given block group - * - * Read the bitmap for a given block_group,and validate the - * bits for block/inode/inode tables are set in the bitmaps - * - * Return buffer_head on success or NULL in case of failure. - */ -static struct buffer_head * -read_block_bitmap(struct super_block *sb, unsigned int block_group) -{ - struct ext3_group_desc * desc; - struct buffer_head * bh = NULL; - ext3_fsblk_t bitmap_blk; - - desc = ext3_get_group_desc(sb, block_group, NULL); - if (!desc) - return NULL; - trace_ext3_read_block_bitmap(sb, block_group); - bitmap_blk = le32_to_cpu(desc->bg_block_bitmap); - bh = sb_getblk(sb, bitmap_blk); - if (unlikely(!bh)) { - ext3_error(sb, __func__, - "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %u", - block_group, le32_to_cpu(desc->bg_block_bitmap)); - return NULL; - } - if (likely(bh_uptodate_or_lock(bh))) - return bh; - - if (bh_submit_read(bh) < 0) { - brelse(bh); - ext3_error(sb, __func__, - "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %u", - block_group, le32_to_cpu(desc->bg_block_bitmap)); - return NULL; - } - ext3_valid_block_bitmap(sb, desc, block_group, bh); - /* - * file system mounted not to panic on error, continue with corrupt - * bitmap - */ - return bh; -} -/* - * The reservation window structure operations - * -------------------------------------------- - * Operations include: - * dump, find, add, remove, is_empty, find_next_reservable_window, etc. - * - * We use a red-black tree to represent per-filesystem reservation - * windows. - * - */ - -/** - * __rsv_window_dump() -- Dump the filesystem block allocation reservation map - * @rb_root: root of per-filesystem reservation rb tree - * @verbose: verbose mode - * @fn: function which wishes to dump the reservation map - * - * If verbose is turned on, it will print the whole block reservation - * windows(start, end). Otherwise, it will only print out the "bad" windows, - * those windows that overlap with their immediate neighbors. - */ -#if 1 -static void __rsv_window_dump(struct rb_root *root, int verbose, - const char *fn) -{ - struct rb_node *n; - struct ext3_reserve_window_node *rsv, *prev; - int bad; - -restart: - n = rb_first(root); - bad = 0; - prev = NULL; - - printk("Block Allocation Reservation Windows Map (%s):\n", fn); - while (n) { - rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); - if (verbose) - printk("reservation window 0x%p " - "start: %lu, end: %lu\n", - rsv, rsv->rsv_start, rsv->rsv_end); - if (rsv->rsv_start && rsv->rsv_start >= rsv->rsv_end) { - printk("Bad reservation %p (start >= end)\n", - rsv); - bad = 1; - } - if (prev && prev->rsv_end >= rsv->rsv_start) { - printk("Bad reservation %p (prev->end >= start)\n", - rsv); - bad = 1; - } - if (bad) { - if (!verbose) { - printk("Restarting reservation walk in verbose mode\n"); - verbose = 1; - goto restart; - } - } - n = rb_next(n); - prev = rsv; - } - printk("Window map complete.\n"); - BUG_ON(bad); -} -#define rsv_window_dump(root, verbose) \ - __rsv_window_dump((root), (verbose), __func__) -#else -#define rsv_window_dump(root, verbose) do {} while (0) -#endif - -/** - * goal_in_my_reservation() - * @rsv: inode's reservation window - * @grp_goal: given goal block relative to the allocation block group - * @group: the current allocation block group - * @sb: filesystem super block - * - * Test if the given goal block (group relative) is within the file's - * own block reservation window range. - * - * If the reservation window is outside the goal allocation group, return 0; - * grp_goal (given goal block) could be -1, which means no specific - * goal block. In this case, always return 1. - * If the goal block is within the reservation window, return 1; - * otherwise, return 0; - */ -static int -goal_in_my_reservation(struct ext3_reserve_window *rsv, ext3_grpblk_t grp_goal, - unsigned int group, struct super_block * sb) -{ - ext3_fsblk_t group_first_block, group_last_block; - - group_first_block = ext3_group_first_block_no(sb, group); - group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - if ((rsv->_rsv_start > group_last_block) || - (rsv->_rsv_end < group_first_block)) - return 0; - if ((grp_goal >= 0) && ((grp_goal + group_first_block < rsv->_rsv_start) - || (grp_goal + group_first_block > rsv->_rsv_end))) - return 0; - return 1; -} - -/** - * search_reserve_window() - * @rb_root: root of reservation tree - * @goal: target allocation block - * - * Find the reserved window which includes the goal, or the previous one - * if the goal is not in any window. - * Returns NULL if there are no windows or if all windows start after the goal. - */ -static struct ext3_reserve_window_node * -search_reserve_window(struct rb_root *root, ext3_fsblk_t goal) -{ - struct rb_node *n = root->rb_node; - struct ext3_reserve_window_node *rsv; - - if (!n) - return NULL; - - do { - rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); - - if (goal < rsv->rsv_start) - n = n->rb_left; - else if (goal > rsv->rsv_end) - n = n->rb_right; - else - return rsv; - } while (n); - /* - * We've fallen off the end of the tree: the goal wasn't inside - * any particular node. OK, the previous node must be to one - * side of the interval containing the goal. If it's the RHS, - * we need to back up one. - */ - if (rsv->rsv_start > goal) { - n = rb_prev(&rsv->rsv_node); - rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); - } - return rsv; -} - -/** - * ext3_rsv_window_add() -- Insert a window to the block reservation rb tree. - * @sb: super block - * @rsv: reservation window to add - * - * Must be called with rsv_lock hold. - */ -void ext3_rsv_window_add(struct super_block *sb, - struct ext3_reserve_window_node *rsv) -{ - struct rb_root *root = &EXT3_SB(sb)->s_rsv_window_root; - struct rb_node *node = &rsv->rsv_node; - ext3_fsblk_t start = rsv->rsv_start; - - struct rb_node ** p = &root->rb_node; - struct rb_node * parent = NULL; - struct ext3_reserve_window_node *this; - - trace_ext3_rsv_window_add(sb, rsv); - while (*p) - { - parent = *p; - this = rb_entry(parent, struct ext3_reserve_window_node, rsv_node); - - if (start < this->rsv_start) - p = &(*p)->rb_left; - else if (start > this->rsv_end) - p = &(*p)->rb_right; - else { - rsv_window_dump(root, 1); - BUG(); - } - } - - rb_link_node(node, parent, p); - rb_insert_color(node, root); -} - -/** - * ext3_rsv_window_remove() -- unlink a window from the reservation rb tree - * @sb: super block - * @rsv: reservation window to remove - * - * Mark the block reservation window as not allocated, and unlink it - * from the filesystem reservation window rb tree. Must be called with - * rsv_lock hold. - */ -static void rsv_window_remove(struct super_block *sb, - struct ext3_reserve_window_node *rsv) -{ - rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - rsv->rsv_alloc_hit = 0; - rb_erase(&rsv->rsv_node, &EXT3_SB(sb)->s_rsv_window_root); -} - -/* - * rsv_is_empty() -- Check if the reservation window is allocated. - * @rsv: given reservation window to check - * - * returns 1 if the end block is EXT3_RESERVE_WINDOW_NOT_ALLOCATED. - */ -static inline int rsv_is_empty(struct ext3_reserve_window *rsv) -{ - /* a valid reservation end block could not be 0 */ - return rsv->_rsv_end == EXT3_RESERVE_WINDOW_NOT_ALLOCATED; -} - -/** - * ext3_init_block_alloc_info() - * @inode: file inode structure - * - * Allocate and initialize the reservation window structure, and - * link the window to the ext3 inode structure at last - * - * The reservation window structure is only dynamically allocated - * and linked to ext3 inode the first time the open file - * needs a new block. So, before every ext3_new_block(s) call, for - * regular files, we should check whether the reservation window - * structure exists or not. In the latter case, this function is called. - * Fail to do so will result in block reservation being turned off for that - * open file. - * - * This function is called from ext3_get_blocks_handle(), also called - * when setting the reservation window size through ioctl before the file - * is open for write (needs block allocation). - * - * Needs truncate_mutex protection prior to call this function. - */ -void ext3_init_block_alloc_info(struct inode *inode) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_block_alloc_info *block_i; - struct super_block *sb = inode->i_sb; - - block_i = kmalloc(sizeof(*block_i), GFP_NOFS); - if (block_i) { - struct ext3_reserve_window_node *rsv = &block_i->rsv_window_node; - - rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - - /* - * if filesystem is mounted with NORESERVATION, the goal - * reservation window size is set to zero to indicate - * block reservation is off - */ - if (!test_opt(sb, RESERVATION)) - rsv->rsv_goal_size = 0; - else - rsv->rsv_goal_size = EXT3_DEFAULT_RESERVE_BLOCKS; - rsv->rsv_alloc_hit = 0; - block_i->last_alloc_logical_block = 0; - block_i->last_alloc_physical_block = 0; - } - ei->i_block_alloc_info = block_i; -} - -/** - * ext3_discard_reservation() - * @inode: inode - * - * Discard(free) block reservation window on last file close, or truncate - * or at last iput(). - * - * It is being called in three cases: - * ext3_release_file(): last writer close the file - * ext3_clear_inode(): last iput(), when nobody link to this file. - * ext3_truncate(): when the block indirect map is about to change. - * - */ -void ext3_discard_reservation(struct inode *inode) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info; - struct ext3_reserve_window_node *rsv; - spinlock_t *rsv_lock = &EXT3_SB(inode->i_sb)->s_rsv_window_lock; - - if (!block_i) - return; - - rsv = &block_i->rsv_window_node; - if (!rsv_is_empty(&rsv->rsv_window)) { - spin_lock(rsv_lock); - if (!rsv_is_empty(&rsv->rsv_window)) { - trace_ext3_discard_reservation(inode, rsv); - rsv_window_remove(inode->i_sb, rsv); - } - spin_unlock(rsv_lock); - } -} - -/** - * ext3_free_blocks_sb() -- Free given blocks and update quota - * @handle: handle to this transaction - * @sb: super block - * @block: start physcial block to free - * @count: number of blocks to free - * @pdquot_freed_blocks: pointer to quota - */ -void ext3_free_blocks_sb(handle_t *handle, struct super_block *sb, - ext3_fsblk_t block, unsigned long count, - unsigned long *pdquot_freed_blocks) -{ - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *gd_bh; - unsigned long block_group; - ext3_grpblk_t bit; - unsigned long i; - unsigned long overflow; - struct ext3_group_desc * desc; - struct ext3_super_block * es; - struct ext3_sb_info *sbi; - int err = 0, ret; - ext3_grpblk_t group_freed; - - *pdquot_freed_blocks = 0; - sbi = EXT3_SB(sb); - es = sbi->s_es; - if (block < le32_to_cpu(es->s_first_data_block) || - block + count < block || - block + count > le32_to_cpu(es->s_blocks_count)) { - ext3_error (sb, "ext3_free_blocks", - "Freeing blocks not in datazone - " - "block = "E3FSBLK", count = %lu", block, count); - goto error_return; - } - - ext3_debug ("freeing block(s) %lu-%lu\n", block, block + count - 1); - -do_more: - overflow = 0; - block_group = (block - le32_to_cpu(es->s_first_data_block)) / - EXT3_BLOCKS_PER_GROUP(sb); - bit = (block - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb); - /* - * Check to see if we are freeing blocks across a group - * boundary. - */ - if (bit + count > EXT3_BLOCKS_PER_GROUP(sb)) { - overflow = bit + count - EXT3_BLOCKS_PER_GROUP(sb); - count -= overflow; - } - brelse(bitmap_bh); - bitmap_bh = read_block_bitmap(sb, block_group); - if (!bitmap_bh) - goto error_return; - desc = ext3_get_group_desc (sb, block_group, &gd_bh); - if (!desc) - goto error_return; - - if (in_range (le32_to_cpu(desc->bg_block_bitmap), block, count) || - in_range (le32_to_cpu(desc->bg_inode_bitmap), block, count) || - in_range (block, le32_to_cpu(desc->bg_inode_table), - sbi->s_itb_per_group) || - in_range (block + count - 1, le32_to_cpu(desc->bg_inode_table), - sbi->s_itb_per_group)) { - ext3_error (sb, "ext3_free_blocks", - "Freeing blocks in system zones - " - "Block = "E3FSBLK", count = %lu", - block, count); - goto error_return; - } - - /* - * We are about to start releasing blocks in the bitmap, - * so we need undo access. - */ - /* @@@ check errors */ - BUFFER_TRACE(bitmap_bh, "getting undo access"); - err = ext3_journal_get_undo_access(handle, bitmap_bh); - if (err) - goto error_return; - - /* - * We are about to modify some metadata. Call the journal APIs - * to unshare ->b_data if a currently-committing transaction is - * using it - */ - BUFFER_TRACE(gd_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, gd_bh); - if (err) - goto error_return; - - jbd_lock_bh_state(bitmap_bh); - - for (i = 0, group_freed = 0; i < count; i++) { - /* - * An HJ special. This is expensive... - */ -#ifdef CONFIG_JBD_DEBUG - jbd_unlock_bh_state(bitmap_bh); - { - struct buffer_head *debug_bh; - debug_bh = sb_find_get_block(sb, block + i); - if (debug_bh) { - BUFFER_TRACE(debug_bh, "Deleted!"); - if (!bh2jh(bitmap_bh)->b_committed_data) - BUFFER_TRACE(debug_bh, - "No committed data in bitmap"); - BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap"); - __brelse(debug_bh); - } - } - jbd_lock_bh_state(bitmap_bh); -#endif - if (need_resched()) { - jbd_unlock_bh_state(bitmap_bh); - cond_resched(); - jbd_lock_bh_state(bitmap_bh); - } - /* @@@ This prevents newly-allocated data from being - * freed and then reallocated within the same - * transaction. - * - * Ideally we would want to allow that to happen, but to - * do so requires making journal_forget() capable of - * revoking the queued write of a data block, which - * implies blocking on the journal lock. *forget() - * cannot block due to truncate races. - * - * Eventually we can fix this by making journal_forget() - * return a status indicating whether or not it was able - * to revoke the buffer. On successful revoke, it is - * safe not to set the allocation bit in the committed - * bitmap, because we know that there is no outstanding - * activity on the buffer any more and so it is safe to - * reallocate it. - */ - BUFFER_TRACE(bitmap_bh, "set in b_committed_data"); - J_ASSERT_BH(bitmap_bh, - bh2jh(bitmap_bh)->b_committed_data != NULL); - ext3_set_bit_atomic(sb_bgl_lock(sbi, block_group), bit + i, - bh2jh(bitmap_bh)->b_committed_data); - - /* - * We clear the bit in the bitmap after setting the committed - * data bit, because this is the reverse order to that which - * the allocator uses. - */ - BUFFER_TRACE(bitmap_bh, "clear bit"); - if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), - bit + i, bitmap_bh->b_data)) { - jbd_unlock_bh_state(bitmap_bh); - ext3_error(sb, __func__, - "bit already cleared for block "E3FSBLK, - block + i); - jbd_lock_bh_state(bitmap_bh); - BUFFER_TRACE(bitmap_bh, "bit already cleared"); - } else { - group_freed++; - } - } - jbd_unlock_bh_state(bitmap_bh); - - spin_lock(sb_bgl_lock(sbi, block_group)); - le16_add_cpu(&desc->bg_free_blocks_count, group_freed); - spin_unlock(sb_bgl_lock(sbi, block_group)); - percpu_counter_add(&sbi->s_freeblocks_counter, count); - - /* We dirtied the bitmap block */ - BUFFER_TRACE(bitmap_bh, "dirtied bitmap block"); - err = ext3_journal_dirty_metadata(handle, bitmap_bh); - - /* And the group descriptor block */ - BUFFER_TRACE(gd_bh, "dirtied group descriptor block"); - ret = ext3_journal_dirty_metadata(handle, gd_bh); - if (!err) err = ret; - *pdquot_freed_blocks += group_freed; - - if (overflow && !err) { - block += count; - count = overflow; - goto do_more; - } - -error_return: - brelse(bitmap_bh); - ext3_std_error(sb, err); - return; -} - -/** - * ext3_free_blocks() -- Free given blocks and update quota - * @handle: handle for this transaction - * @inode: inode - * @block: start physical block to free - * @count: number of blocks to count - */ -void ext3_free_blocks(handle_t *handle, struct inode *inode, - ext3_fsblk_t block, unsigned long count) -{ - struct super_block *sb = inode->i_sb; - unsigned long dquot_freed_blocks; - - trace_ext3_free_blocks(inode, block, count); - ext3_free_blocks_sb(handle, sb, block, count, &dquot_freed_blocks); - if (dquot_freed_blocks) - dquot_free_block(inode, dquot_freed_blocks); - return; -} - -/** - * ext3_test_allocatable() - * @nr: given allocation block group - * @bh: bufferhead contains the bitmap of the given block group - * - * For ext3 allocations, we must not reuse any blocks which are - * allocated in the bitmap buffer's "last committed data" copy. This - * prevents deletes from freeing up the page for reuse until we have - * committed the delete transaction. - * - * If we didn't do this, then deleting something and reallocating it as - * data would allow the old block to be overwritten before the - * transaction committed (because we force data to disk before commit). - * This would lead to corruption if we crashed between overwriting the - * data and committing the delete. - * - * @@@ We may want to make this allocation behaviour conditional on - * data-writes at some point, and disable it for metadata allocations or - * sync-data inodes. - */ -static int ext3_test_allocatable(ext3_grpblk_t nr, struct buffer_head *bh) -{ - int ret; - struct journal_head *jh = bh2jh(bh); - - if (ext3_test_bit(nr, bh->b_data)) - return 0; - - jbd_lock_bh_state(bh); - if (!jh->b_committed_data) - ret = 1; - else - ret = !ext3_test_bit(nr, jh->b_committed_data); - jbd_unlock_bh_state(bh); - return ret; -} - -/** - * bitmap_search_next_usable_block() - * @start: the starting block (group relative) of the search - * @bh: bufferhead contains the block group bitmap - * @maxblocks: the ending block (group relative) of the reservation - * - * The bitmap search --- search forward alternately through the actual - * bitmap on disk and the last-committed copy in journal, until we find a - * bit free in both bitmaps. - */ -static ext3_grpblk_t -bitmap_search_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, - ext3_grpblk_t maxblocks) -{ - ext3_grpblk_t next; - struct journal_head *jh = bh2jh(bh); - - while (start < maxblocks) { - next = ext3_find_next_zero_bit(bh->b_data, maxblocks, start); - if (next >= maxblocks) - return -1; - if (ext3_test_allocatable(next, bh)) - return next; - jbd_lock_bh_state(bh); - if (jh->b_committed_data) - start = ext3_find_next_zero_bit(jh->b_committed_data, - maxblocks, next); - jbd_unlock_bh_state(bh); - } - return -1; -} - -/** - * find_next_usable_block() - * @start: the starting block (group relative) to find next - * allocatable block in bitmap. - * @bh: bufferhead contains the block group bitmap - * @maxblocks: the ending block (group relative) for the search - * - * Find an allocatable block in a bitmap. We honor both the bitmap and - * its last-committed copy (if that exists), and perform the "most - * appropriate allocation" algorithm of looking for a free block near - * the initial goal; then for a free byte somewhere in the bitmap; then - * for any free bit in the bitmap. - */ -static ext3_grpblk_t -find_next_usable_block(ext3_grpblk_t start, struct buffer_head *bh, - ext3_grpblk_t maxblocks) -{ - ext3_grpblk_t here, next; - char *p, *r; - - if (start > 0) { - /* - * The goal was occupied; search forward for a free - * block within the next XX blocks. - * - * end_goal is more or less random, but it has to be - * less than EXT3_BLOCKS_PER_GROUP. Aligning up to the - * next 64-bit boundary is simple.. - */ - ext3_grpblk_t end_goal = (start + 63) & ~63; - if (end_goal > maxblocks) - end_goal = maxblocks; - here = ext3_find_next_zero_bit(bh->b_data, end_goal, start); - if (here < end_goal && ext3_test_allocatable(here, bh)) - return here; - ext3_debug("Bit not found near goal\n"); - } - - here = start; - if (here < 0) - here = 0; - - p = bh->b_data + (here >> 3); - r = memscan(p, 0, ((maxblocks + 7) >> 3) - (here >> 3)); - next = (r - bh->b_data) << 3; - - if (next < maxblocks && next >= start && ext3_test_allocatable(next, bh)) - return next; - - /* - * The bitmap search --- search forward alternately through the actual - * bitmap and the last-committed copy until we find a bit free in - * both - */ - here = bitmap_search_next_usable_block(here, bh, maxblocks); - return here; -} - -/** - * claim_block() - * @lock: the spin lock for this block group - * @block: the free block (group relative) to allocate - * @bh: the buffer_head contains the block group bitmap - * - * We think we can allocate this block in this bitmap. Try to set the bit. - * If that succeeds then check that nobody has allocated and then freed the - * block since we saw that is was not marked in b_committed_data. If it _was_ - * allocated and freed then clear the bit in the bitmap again and return - * zero (failure). - */ -static inline int -claim_block(spinlock_t *lock, ext3_grpblk_t block, struct buffer_head *bh) -{ - struct journal_head *jh = bh2jh(bh); - int ret; - - if (ext3_set_bit_atomic(lock, block, bh->b_data)) - return 0; - jbd_lock_bh_state(bh); - if (jh->b_committed_data && ext3_test_bit(block,jh->b_committed_data)) { - ext3_clear_bit_atomic(lock, block, bh->b_data); - ret = 0; - } else { - ret = 1; - } - jbd_unlock_bh_state(bh); - return ret; -} - -/** - * ext3_try_to_allocate() - * @sb: superblock - * @handle: handle to this transaction - * @group: given allocation block group - * @bitmap_bh: bufferhead holds the block bitmap - * @grp_goal: given target block within the group - * @count: target number of blocks to allocate - * @my_rsv: reservation window - * - * Attempt to allocate blocks within a give range. Set the range of allocation - * first, then find the first free bit(s) from the bitmap (within the range), - * and at last, allocate the blocks by claiming the found free bit as allocated. - * - * To set the range of this allocation: - * if there is a reservation window, only try to allocate block(s) from the - * file's own reservation window; - * Otherwise, the allocation range starts from the give goal block, ends at - * the block group's last block. - * - * If we failed to allocate the desired block then we may end up crossing to a - * new bitmap. In that case we must release write access to the old one via - * ext3_journal_release_buffer(), else we'll run out of credits. - */ -static ext3_grpblk_t -ext3_try_to_allocate(struct super_block *sb, handle_t *handle, int group, - struct buffer_head *bitmap_bh, ext3_grpblk_t grp_goal, - unsigned long *count, struct ext3_reserve_window *my_rsv) -{ - ext3_fsblk_t group_first_block; - ext3_grpblk_t start, end; - unsigned long num = 0; - - /* we do allocation within the reservation window if we have a window */ - if (my_rsv) { - group_first_block = ext3_group_first_block_no(sb, group); - if (my_rsv->_rsv_start >= group_first_block) - start = my_rsv->_rsv_start - group_first_block; - else - /* reservation window cross group boundary */ - start = 0; - end = my_rsv->_rsv_end - group_first_block + 1; - if (end > EXT3_BLOCKS_PER_GROUP(sb)) - /* reservation window crosses group boundary */ - end = EXT3_BLOCKS_PER_GROUP(sb); - if ((start <= grp_goal) && (grp_goal < end)) - start = grp_goal; - else - grp_goal = -1; - } else { - if (grp_goal > 0) - start = grp_goal; - else - start = 0; - end = EXT3_BLOCKS_PER_GROUP(sb); - } - - BUG_ON(start > EXT3_BLOCKS_PER_GROUP(sb)); - -repeat: - if (grp_goal < 0 || !ext3_test_allocatable(grp_goal, bitmap_bh)) { - grp_goal = find_next_usable_block(start, bitmap_bh, end); - if (grp_goal < 0) - goto fail_access; - if (!my_rsv) { - int i; - - for (i = 0; i < 7 && grp_goal > start && - ext3_test_allocatable(grp_goal - 1, - bitmap_bh); - i++, grp_goal--) - ; - } - } - start = grp_goal; - - if (!claim_block(sb_bgl_lock(EXT3_SB(sb), group), - grp_goal, bitmap_bh)) { - /* - * The block was allocated by another thread, or it was - * allocated and then freed by another thread - */ - start++; - grp_goal++; - if (start >= end) - goto fail_access; - goto repeat; - } - num++; - grp_goal++; - while (num < *count && grp_goal < end - && ext3_test_allocatable(grp_goal, bitmap_bh) - && claim_block(sb_bgl_lock(EXT3_SB(sb), group), - grp_goal, bitmap_bh)) { - num++; - grp_goal++; - } - *count = num; - return grp_goal - num; -fail_access: - *count = num; - return -1; -} - -/** - * find_next_reservable_window(): - * find a reservable space within the given range. - * It does not allocate the reservation window for now: - * alloc_new_reservation() will do the work later. - * - * @search_head: the head of the searching list; - * This is not necessarily the list head of the whole filesystem - * - * We have both head and start_block to assist the search - * for the reservable space. The list starts from head, - * but we will shift to the place where start_block is, - * then start from there, when looking for a reservable space. - * - * @my_rsv: the reservation window - * - * @sb: the super block - * - * @start_block: the first block we consider to start - * the real search from - * - * @last_block: - * the maximum block number that our goal reservable space - * could start from. This is normally the last block in this - * group. The search will end when we found the start of next - * possible reservable space is out of this boundary. - * This could handle the cross boundary reservation window - * request. - * - * basically we search from the given range, rather than the whole - * reservation double linked list, (start_block, last_block) - * to find a free region that is of my size and has not - * been reserved. - * - */ -static int find_next_reservable_window( - struct ext3_reserve_window_node *search_head, - struct ext3_reserve_window_node *my_rsv, - struct super_block * sb, - ext3_fsblk_t start_block, - ext3_fsblk_t last_block) -{ - struct rb_node *next; - struct ext3_reserve_window_node *rsv, *prev; - ext3_fsblk_t cur; - int size = my_rsv->rsv_goal_size; - - /* TODO: make the start of the reservation window byte-aligned */ - /* cur = *start_block & ~7;*/ - cur = start_block; - rsv = search_head; - if (!rsv) - return -1; - - while (1) { - if (cur <= rsv->rsv_end) - cur = rsv->rsv_end + 1; - - /* TODO? - * in the case we could not find a reservable space - * that is what is expected, during the re-search, we could - * remember what's the largest reservable space we could have - * and return that one. - * - * For now it will fail if we could not find the reservable - * space with expected-size (or more)... - */ - if (cur > last_block) - return -1; /* fail */ - - prev = rsv; - next = rb_next(&rsv->rsv_node); - rsv = rb_entry(next,struct ext3_reserve_window_node,rsv_node); - - /* - * Reached the last reservation, we can just append to the - * previous one. - */ - if (!next) - break; - - if (cur + size <= rsv->rsv_start) { - /* - * Found a reserveable space big enough. We could - * have a reservation across the group boundary here - */ - break; - } - } - /* - * we come here either : - * when we reach the end of the whole list, - * and there is empty reservable space after last entry in the list. - * append it to the end of the list. - * - * or we found one reservable space in the middle of the list, - * return the reservation window that we could append to. - * succeed. - */ - - if ((prev != my_rsv) && (!rsv_is_empty(&my_rsv->rsv_window))) - rsv_window_remove(sb, my_rsv); - - /* - * Let's book the whole available window for now. We will check the - * disk bitmap later and then, if there are free blocks then we adjust - * the window size if it's larger than requested. - * Otherwise, we will remove this node from the tree next time - * call find_next_reservable_window. - */ - my_rsv->rsv_start = cur; - my_rsv->rsv_end = cur + size - 1; - my_rsv->rsv_alloc_hit = 0; - - if (prev != my_rsv) - ext3_rsv_window_add(sb, my_rsv); - - return 0; -} - -/** - * alloc_new_reservation()--allocate a new reservation window - * - * To make a new reservation, we search part of the filesystem - * reservation list (the list that inside the group). We try to - * allocate a new reservation window near the allocation goal, - * or the beginning of the group, if there is no goal. - * - * We first find a reservable space after the goal, then from - * there, we check the bitmap for the first free block after - * it. If there is no free block until the end of group, then the - * whole group is full, we failed. Otherwise, check if the free - * block is inside the expected reservable space, if so, we - * succeed. - * If the first free block is outside the reservable space, then - * start from the first free block, we search for next available - * space, and go on. - * - * on succeed, a new reservation will be found and inserted into the list - * It contains at least one free block, and it does not overlap with other - * reservation windows. - * - * failed: we failed to find a reservation window in this group - * - * @my_rsv: the reservation window - * - * @grp_goal: The goal (group-relative). It is where the search for a - * free reservable space should start from. - * if we have a grp_goal(grp_goal >0 ), then start from there, - * no grp_goal(grp_goal = -1), we start from the first block - * of the group. - * - * @sb: the super block - * @group: the group we are trying to allocate in - * @bitmap_bh: the block group block bitmap - * - */ -static int alloc_new_reservation(struct ext3_reserve_window_node *my_rsv, - ext3_grpblk_t grp_goal, struct super_block *sb, - unsigned int group, struct buffer_head *bitmap_bh) -{ - struct ext3_reserve_window_node *search_head; - ext3_fsblk_t group_first_block, group_end_block, start_block; - ext3_grpblk_t first_free_block; - struct rb_root *fs_rsv_root = &EXT3_SB(sb)->s_rsv_window_root; - unsigned long size; - int ret; - spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; - - group_first_block = ext3_group_first_block_no(sb, group); - group_end_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - if (grp_goal < 0) - start_block = group_first_block; - else - start_block = grp_goal + group_first_block; - - trace_ext3_alloc_new_reservation(sb, start_block); - size = my_rsv->rsv_goal_size; - - if (!rsv_is_empty(&my_rsv->rsv_window)) { - /* - * if the old reservation is cross group boundary - * and if the goal is inside the old reservation window, - * we will come here when we just failed to allocate from - * the first part of the window. We still have another part - * that belongs to the next group. In this case, there is no - * point to discard our window and try to allocate a new one - * in this group(which will fail). we should - * keep the reservation window, just simply move on. - * - * Maybe we could shift the start block of the reservation - * window to the first block of next group. - */ - - if ((my_rsv->rsv_start <= group_end_block) && - (my_rsv->rsv_end > group_end_block) && - (start_block >= my_rsv->rsv_start)) - return -1; - - if ((my_rsv->rsv_alloc_hit > - (my_rsv->rsv_end - my_rsv->rsv_start + 1) / 2)) { - /* - * if the previously allocation hit ratio is - * greater than 1/2, then we double the size of - * the reservation window the next time, - * otherwise we keep the same size window - */ - size = size * 2; - if (size > EXT3_MAX_RESERVE_BLOCKS) - size = EXT3_MAX_RESERVE_BLOCKS; - my_rsv->rsv_goal_size= size; - } - } - - spin_lock(rsv_lock); - /* - * shift the search start to the window near the goal block - */ - search_head = search_reserve_window(fs_rsv_root, start_block); - - /* - * find_next_reservable_window() simply finds a reservable window - * inside the given range(start_block, group_end_block). - * - * To make sure the reservation window has a free bit inside it, we - * need to check the bitmap after we found a reservable window. - */ -retry: - ret = find_next_reservable_window(search_head, my_rsv, sb, - start_block, group_end_block); - - if (ret == -1) { - if (!rsv_is_empty(&my_rsv->rsv_window)) - rsv_window_remove(sb, my_rsv); - spin_unlock(rsv_lock); - return -1; - } - - /* - * On success, find_next_reservable_window() returns the - * reservation window where there is a reservable space after it. - * Before we reserve this reservable space, we need - * to make sure there is at least a free block inside this region. - * - * searching the first free bit on the block bitmap and copy of - * last committed bitmap alternatively, until we found a allocatable - * block. Search start from the start block of the reservable space - * we just found. - */ - spin_unlock(rsv_lock); - first_free_block = bitmap_search_next_usable_block( - my_rsv->rsv_start - group_first_block, - bitmap_bh, group_end_block - group_first_block + 1); - - if (first_free_block < 0) { - /* - * no free block left on the bitmap, no point - * to reserve the space. return failed. - */ - spin_lock(rsv_lock); - if (!rsv_is_empty(&my_rsv->rsv_window)) - rsv_window_remove(sb, my_rsv); - spin_unlock(rsv_lock); - return -1; /* failed */ - } - - start_block = first_free_block + group_first_block; - /* - * check if the first free block is within the - * free space we just reserved - */ - if (start_block >= my_rsv->rsv_start && - start_block <= my_rsv->rsv_end) { - trace_ext3_reserved(sb, start_block, my_rsv); - return 0; /* success */ - } - /* - * if the first free bit we found is out of the reservable space - * continue search for next reservable space, - * start from where the free block is, - * we also shift the list head to where we stopped last time - */ - search_head = my_rsv; - spin_lock(rsv_lock); - goto retry; -} - -/** - * try_to_extend_reservation() - * @my_rsv: given reservation window - * @sb: super block - * @size: the delta to extend - * - * Attempt to expand the reservation window large enough to have - * required number of free blocks - * - * Since ext3_try_to_allocate() will always allocate blocks within - * the reservation window range, if the window size is too small, - * multiple blocks allocation has to stop at the end of the reservation - * window. To make this more efficient, given the total number of - * blocks needed and the current size of the window, we try to - * expand the reservation window size if necessary on a best-effort - * basis before ext3_new_blocks() tries to allocate blocks, - */ -static void try_to_extend_reservation(struct ext3_reserve_window_node *my_rsv, - struct super_block *sb, int size) -{ - struct ext3_reserve_window_node *next_rsv; - struct rb_node *next; - spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; - - if (!spin_trylock(rsv_lock)) - return; - - next = rb_next(&my_rsv->rsv_node); - - if (!next) - my_rsv->rsv_end += size; - else { - next_rsv = rb_entry(next, struct ext3_reserve_window_node, rsv_node); - - if ((next_rsv->rsv_start - my_rsv->rsv_end - 1) >= size) - my_rsv->rsv_end += size; - else - my_rsv->rsv_end = next_rsv->rsv_start - 1; - } - spin_unlock(rsv_lock); -} - -/** - * ext3_try_to_allocate_with_rsv() - * @sb: superblock - * @handle: handle to this transaction - * @group: given allocation block group - * @bitmap_bh: bufferhead holds the block bitmap - * @grp_goal: given target block within the group - * @my_rsv: reservation window - * @count: target number of blocks to allocate - * @errp: pointer to store the error code - * - * This is the main function used to allocate a new block and its reservation - * window. - * - * Each time when a new block allocation is need, first try to allocate from - * its own reservation. If it does not have a reservation window, instead of - * looking for a free bit on bitmap first, then look up the reservation list to - * see if it is inside somebody else's reservation window, we try to allocate a - * reservation window for it starting from the goal first. Then do the block - * allocation within the reservation window. - * - * This will avoid keeping on searching the reservation list again and - * again when somebody is looking for a free block (without - * reservation), and there are lots of free blocks, but they are all - * being reserved. - * - * We use a red-black tree for the per-filesystem reservation list. - * - */ -static ext3_grpblk_t -ext3_try_to_allocate_with_rsv(struct super_block *sb, handle_t *handle, - unsigned int group, struct buffer_head *bitmap_bh, - ext3_grpblk_t grp_goal, - struct ext3_reserve_window_node * my_rsv, - unsigned long *count, int *errp) -{ - ext3_fsblk_t group_first_block, group_last_block; - ext3_grpblk_t ret = 0; - int fatal; - unsigned long num = *count; - - *errp = 0; - - /* - * Make sure we use undo access for the bitmap, because it is critical - * that we do the frozen_data COW on bitmap buffers in all cases even - * if the buffer is in BJ_Forget state in the committing transaction. - */ - BUFFER_TRACE(bitmap_bh, "get undo access for new block"); - fatal = ext3_journal_get_undo_access(handle, bitmap_bh); - if (fatal) { - *errp = fatal; - return -1; - } - - /* - * we don't deal with reservation when - * filesystem is mounted without reservation - * or the file is not a regular file - * or last attempt to allocate a block with reservation turned on failed - */ - if (my_rsv == NULL ) { - ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, - grp_goal, count, NULL); - goto out; - } - /* - * grp_goal is a group relative block number (if there is a goal) - * 0 <= grp_goal < EXT3_BLOCKS_PER_GROUP(sb) - * first block is a filesystem wide block number - * first block is the block number of the first block in this group - */ - group_first_block = ext3_group_first_block_no(sb, group); - group_last_block = group_first_block + (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - /* - * Basically we will allocate a new block from inode's reservation - * window. - * - * We need to allocate a new reservation window, if: - * a) inode does not have a reservation window; or - * b) last attempt to allocate a block from existing reservation - * failed; or - * c) we come here with a goal and with a reservation window - * - * We do not need to allocate a new reservation window if we come here - * at the beginning with a goal and the goal is inside the window, or - * we don't have a goal but already have a reservation window. - * then we could go to allocate from the reservation window directly. - */ - while (1) { - if (rsv_is_empty(&my_rsv->rsv_window) || (ret < 0) || - !goal_in_my_reservation(&my_rsv->rsv_window, - grp_goal, group, sb)) { - if (my_rsv->rsv_goal_size < *count) - my_rsv->rsv_goal_size = *count; - ret = alloc_new_reservation(my_rsv, grp_goal, sb, - group, bitmap_bh); - if (ret < 0) - break; /* failed */ - - if (!goal_in_my_reservation(&my_rsv->rsv_window, - grp_goal, group, sb)) - grp_goal = -1; - } else if (grp_goal >= 0) { - int curr = my_rsv->rsv_end - - (grp_goal + group_first_block) + 1; - - if (curr < *count) - try_to_extend_reservation(my_rsv, sb, - *count - curr); - } - - if ((my_rsv->rsv_start > group_last_block) || - (my_rsv->rsv_end < group_first_block)) { - rsv_window_dump(&EXT3_SB(sb)->s_rsv_window_root, 1); - BUG(); - } - ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, - grp_goal, &num, &my_rsv->rsv_window); - if (ret >= 0) { - my_rsv->rsv_alloc_hit += num; - *count = num; - break; /* succeed */ - } - num = *count; - } -out: - if (ret >= 0) { - BUFFER_TRACE(bitmap_bh, "journal_dirty_metadata for " - "bitmap block"); - fatal = ext3_journal_dirty_metadata(handle, bitmap_bh); - if (fatal) { - *errp = fatal; - return -1; - } - return ret; - } - - BUFFER_TRACE(bitmap_bh, "journal_release_buffer"); - ext3_journal_release_buffer(handle, bitmap_bh); - return ret; -} - -/** - * ext3_has_free_blocks() - * @sbi: in-core super block structure. - * - * Check if filesystem has at least 1 free block available for allocation. - */ -static int ext3_has_free_blocks(struct ext3_sb_info *sbi, int use_reservation) -{ - ext3_fsblk_t free_blocks, root_blocks; - - free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter); - root_blocks = le32_to_cpu(sbi->s_es->s_r_blocks_count); - if (free_blocks < root_blocks + 1 && !capable(CAP_SYS_RESOURCE) && - !use_reservation && sbi->s_resuid != current_fsuid() && - (sbi->s_resgid == 0 || !in_group_p (sbi->s_resgid))) { - return 0; - } - return 1; -} - -/** - * ext3_should_retry_alloc() - * @sb: super block - * @retries number of attemps has been made - * - * ext3_should_retry_alloc() is called when ENOSPC is returned, and if - * it is profitable to retry the operation, this function will wait - * for the current or committing transaction to complete, and then - * return TRUE. - * - * if the total number of retries exceed three times, return FALSE. - */ -int ext3_should_retry_alloc(struct super_block *sb, int *retries) -{ - if (!ext3_has_free_blocks(EXT3_SB(sb), 0) || (*retries)++ > 3) - return 0; - - jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id); - - return journal_force_commit_nested(EXT3_SB(sb)->s_journal); -} - -/** - * ext3_new_blocks() -- core block(s) allocation function - * @handle: handle to this transaction - * @inode: file inode - * @goal: given target block(filesystem wide) - * @count: target number of blocks to allocate - * @errp: error code - * - * ext3_new_blocks uses a goal block to assist allocation. It tries to - * allocate block(s) from the block group contains the goal block first. If that - * fails, it will try to allocate block(s) from other block groups without - * any specific goal block. - * - */ -ext3_fsblk_t ext3_new_blocks(handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, unsigned long *count, int *errp) -{ - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *gdp_bh; - int group_no; - int goal_group; - ext3_grpblk_t grp_target_blk; /* blockgroup relative goal block */ - ext3_grpblk_t grp_alloc_blk; /* blockgroup-relative allocated block*/ - ext3_fsblk_t ret_block; /* filesyetem-wide allocated block */ - int bgi; /* blockgroup iteration index */ - int fatal = 0, err; - int performed_allocation = 0; - ext3_grpblk_t free_blocks; /* number of free blocks in a group */ - struct super_block *sb; - struct ext3_group_desc *gdp; - struct ext3_super_block *es; - struct ext3_sb_info *sbi; - struct ext3_reserve_window_node *my_rsv = NULL; - struct ext3_block_alloc_info *block_i; - unsigned short windowsz = 0; -#ifdef EXT3FS_DEBUG - static int goal_hits, goal_attempts; -#endif - unsigned long ngroups; - unsigned long num = *count; - - *errp = -ENOSPC; - sb = inode->i_sb; - - /* - * Check quota for allocation of this block. - */ - err = dquot_alloc_block(inode, num); - if (err) { - *errp = err; - return 0; - } - - trace_ext3_request_blocks(inode, goal, num); - - sbi = EXT3_SB(sb); - es = sbi->s_es; - ext3_debug("goal=%lu.\n", goal); - /* - * Allocate a block from reservation only when - * filesystem is mounted with reservation(default,-o reservation), and - * it's a regular file, and - * the desired window size is greater than 0 (One could use ioctl - * command EXT3_IOC_SETRSVSZ to set the window size to 0 to turn off - * reservation on that particular file) - */ - block_i = EXT3_I(inode)->i_block_alloc_info; - if (block_i && ((windowsz = block_i->rsv_window_node.rsv_goal_size) > 0)) - my_rsv = &block_i->rsv_window_node; - - if (!ext3_has_free_blocks(sbi, IS_NOQUOTA(inode))) { - *errp = -ENOSPC; - goto out; - } - - /* - * First, test whether the goal block is free. - */ - if (goal < le32_to_cpu(es->s_first_data_block) || - goal >= le32_to_cpu(es->s_blocks_count)) - goal = le32_to_cpu(es->s_first_data_block); - group_no = (goal - le32_to_cpu(es->s_first_data_block)) / - EXT3_BLOCKS_PER_GROUP(sb); - goal_group = group_no; -retry_alloc: - gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); - if (!gdp) - goto io_error; - - free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); - /* - * if there is not enough free blocks to make a new resevation - * turn off reservation for this allocation - */ - if (my_rsv && (free_blocks < windowsz) - && (free_blocks > 0) - && (rsv_is_empty(&my_rsv->rsv_window))) - my_rsv = NULL; - - if (free_blocks > 0) { - grp_target_blk = ((goal - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb)); - bitmap_bh = read_block_bitmap(sb, group_no); - if (!bitmap_bh) - goto io_error; - grp_alloc_blk = ext3_try_to_allocate_with_rsv(sb, handle, - group_no, bitmap_bh, grp_target_blk, - my_rsv, &num, &fatal); - if (fatal) - goto out; - if (grp_alloc_blk >= 0) - goto allocated; - } - - ngroups = EXT3_SB(sb)->s_groups_count; - smp_rmb(); - - /* - * Now search the rest of the groups. We assume that - * group_no and gdp correctly point to the last group visited. - */ - for (bgi = 0; bgi < ngroups; bgi++) { - group_no++; - if (group_no >= ngroups) - group_no = 0; - gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); - if (!gdp) - goto io_error; - free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); - /* - * skip this group (and avoid loading bitmap) if there - * are no free blocks - */ - if (!free_blocks) - continue; - /* - * skip this group if the number of - * free blocks is less than half of the reservation - * window size. - */ - if (my_rsv && (free_blocks <= (windowsz/2))) - continue; - - brelse(bitmap_bh); - bitmap_bh = read_block_bitmap(sb, group_no); - if (!bitmap_bh) - goto io_error; - /* - * try to allocate block(s) from this group, without a goal(-1). - */ - grp_alloc_blk = ext3_try_to_allocate_with_rsv(sb, handle, - group_no, bitmap_bh, -1, my_rsv, - &num, &fatal); - if (fatal) - goto out; - if (grp_alloc_blk >= 0) - goto allocated; - } - /* - * We may end up a bogus earlier ENOSPC error due to - * filesystem is "full" of reservations, but - * there maybe indeed free blocks available on disk - * In this case, we just forget about the reservations - * just do block allocation as without reservations. - */ - if (my_rsv) { - my_rsv = NULL; - windowsz = 0; - group_no = goal_group; - goto retry_alloc; - } - /* No space left on the device */ - *errp = -ENOSPC; - goto out; - -allocated: - - ext3_debug("using block group %d(%d)\n", - group_no, gdp->bg_free_blocks_count); - - BUFFER_TRACE(gdp_bh, "get_write_access"); - fatal = ext3_journal_get_write_access(handle, gdp_bh); - if (fatal) - goto out; - - ret_block = grp_alloc_blk + ext3_group_first_block_no(sb, group_no); - - if (in_range(le32_to_cpu(gdp->bg_block_bitmap), ret_block, num) || - in_range(le32_to_cpu(gdp->bg_inode_bitmap), ret_block, num) || - in_range(ret_block, le32_to_cpu(gdp->bg_inode_table), - EXT3_SB(sb)->s_itb_per_group) || - in_range(ret_block + num - 1, le32_to_cpu(gdp->bg_inode_table), - EXT3_SB(sb)->s_itb_per_group)) { - ext3_error(sb, "ext3_new_block", - "Allocating block in system zone - " - "blocks from "E3FSBLK", length %lu", - ret_block, num); - /* - * claim_block() marked the blocks we allocated as in use. So we - * may want to selectively mark some of the blocks as free. - */ - goto retry_alloc; - } - - performed_allocation = 1; - -#ifdef CONFIG_JBD_DEBUG - { - struct buffer_head *debug_bh; - - /* Record bitmap buffer state in the newly allocated block */ - debug_bh = sb_find_get_block(sb, ret_block); - if (debug_bh) { - BUFFER_TRACE(debug_bh, "state when allocated"); - BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap state"); - brelse(debug_bh); - } - } - jbd_lock_bh_state(bitmap_bh); - spin_lock(sb_bgl_lock(sbi, group_no)); - if (buffer_jbd(bitmap_bh) && bh2jh(bitmap_bh)->b_committed_data) { - int i; - - for (i = 0; i < num; i++) { - if (ext3_test_bit(grp_alloc_blk+i, - bh2jh(bitmap_bh)->b_committed_data)) { - printk("%s: block was unexpectedly set in " - "b_committed_data\n", __func__); - } - } - } - ext3_debug("found bit %d\n", grp_alloc_blk); - spin_unlock(sb_bgl_lock(sbi, group_no)); - jbd_unlock_bh_state(bitmap_bh); -#endif - - if (ret_block + num - 1 >= le32_to_cpu(es->s_blocks_count)) { - ext3_error(sb, "ext3_new_block", - "block("E3FSBLK") >= blocks count(%d) - " - "block_group = %d, es == %p ", ret_block, - le32_to_cpu(es->s_blocks_count), group_no, es); - goto out; - } - - /* - * It is up to the caller to add the new buffer to a journal - * list of some description. We don't know in advance whether - * the caller wants to use it as metadata or data. - */ - ext3_debug("allocating block %lu. Goal hits %d of %d.\n", - ret_block, goal_hits, goal_attempts); - - spin_lock(sb_bgl_lock(sbi, group_no)); - le16_add_cpu(&gdp->bg_free_blocks_count, -num); - spin_unlock(sb_bgl_lock(sbi, group_no)); - percpu_counter_sub(&sbi->s_freeblocks_counter, num); - - BUFFER_TRACE(gdp_bh, "journal_dirty_metadata for group descriptor"); - err = ext3_journal_dirty_metadata(handle, gdp_bh); - if (!fatal) - fatal = err; - - if (fatal) - goto out; - - *errp = 0; - brelse(bitmap_bh); - - if (num < *count) { - dquot_free_block(inode, *count-num); - *count = num; - } - - trace_ext3_allocate_blocks(inode, goal, num, - (unsigned long long)ret_block); - - return ret_block; - -io_error: - *errp = -EIO; -out: - if (fatal) { - *errp = fatal; - ext3_std_error(sb, fatal); - } - /* - * Undo the block allocation - */ - if (!performed_allocation) - dquot_free_block(inode, *count); - brelse(bitmap_bh); - return 0; -} - -ext3_fsblk_t ext3_new_block(handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int *errp) -{ - unsigned long count = 1; - - return ext3_new_blocks(handle, inode, goal, &count, errp); -} - -/** - * ext3_count_free_blocks() -- count filesystem free blocks - * @sb: superblock - * - * Adds up the number of free blocks from each block group. - */ -ext3_fsblk_t ext3_count_free_blocks(struct super_block *sb) -{ - ext3_fsblk_t desc_count; - struct ext3_group_desc *gdp; - int i; - unsigned long ngroups = EXT3_SB(sb)->s_groups_count; -#ifdef EXT3FS_DEBUG - struct ext3_super_block *es; - ext3_fsblk_t bitmap_count; - unsigned long x; - struct buffer_head *bitmap_bh = NULL; - - es = EXT3_SB(sb)->s_es; - desc_count = 0; - bitmap_count = 0; - gdp = NULL; - - smp_rmb(); - for (i = 0; i < ngroups; i++) { - gdp = ext3_get_group_desc(sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_blocks_count); - brelse(bitmap_bh); - bitmap_bh = read_block_bitmap(sb, i); - if (bitmap_bh == NULL) - continue; - - x = ext3_count_free(bitmap_bh, sb->s_blocksize); - printk("group %d: stored = %d, counted = %lu\n", - i, le16_to_cpu(gdp->bg_free_blocks_count), x); - bitmap_count += x; - } - brelse(bitmap_bh); - printk("ext3_count_free_blocks: stored = "E3FSBLK - ", computed = "E3FSBLK", "E3FSBLK"\n", - le32_to_cpu(es->s_free_blocks_count), - desc_count, bitmap_count); - return bitmap_count; -#else - desc_count = 0; - smp_rmb(); - for (i = 0; i < ngroups; i++) { - gdp = ext3_get_group_desc(sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_blocks_count); - } - - return desc_count; -#endif -} - -static inline int test_root(int a, int b) -{ - int num = b; - - while (a > num) - num *= b; - return num == a; -} - -static int ext3_group_sparse(int group) -{ - if (group <= 1) - return 1; - if (!(group & 1)) - return 0; - return (test_root(group, 7) || test_root(group, 5) || - test_root(group, 3)); -} - -/** - * ext3_bg_has_super - number of blocks used by the superblock in group - * @sb: superblock for filesystem - * @group: group number to check - * - * Return the number of blocks used by the superblock (primary or backup) - * in this group. Currently this will be only 0 or 1. - */ -int ext3_bg_has_super(struct super_block *sb, int group) -{ - if (EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER) && - !ext3_group_sparse(group)) - return 0; - return 1; -} - -static unsigned long ext3_bg_num_gdb_meta(struct super_block *sb, int group) -{ - unsigned long metagroup = group / EXT3_DESC_PER_BLOCK(sb); - unsigned long first = metagroup * EXT3_DESC_PER_BLOCK(sb); - unsigned long last = first + EXT3_DESC_PER_BLOCK(sb) - 1; - - if (group == first || group == first + 1 || group == last) - return 1; - return 0; -} - -static unsigned long ext3_bg_num_gdb_nometa(struct super_block *sb, int group) -{ - return ext3_bg_has_super(sb, group) ? EXT3_SB(sb)->s_gdb_count : 0; -} - -/** - * ext3_bg_num_gdb - number of blocks used by the group table in group - * @sb: superblock for filesystem - * @group: group number to check - * - * Return the number of blocks used by the group descriptor table - * (primary or backup) in this group. In the future there may be a - * different number of descriptor blocks in each group. - */ -unsigned long ext3_bg_num_gdb(struct super_block *sb, int group) -{ - unsigned long first_meta_bg = - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_meta_bg); - unsigned long metagroup = group / EXT3_DESC_PER_BLOCK(sb); - - if (!EXT3_HAS_INCOMPAT_FEATURE(sb,EXT3_FEATURE_INCOMPAT_META_BG) || - metagroup < first_meta_bg) - return ext3_bg_num_gdb_nometa(sb,group); - - return ext3_bg_num_gdb_meta(sb,group); - -} - -/** - * ext3_trim_all_free -- function to trim all free space in alloc. group - * @sb: super block for file system - * @group: allocation group to trim - * @start: first group block to examine - * @max: last group block to examine - * @gdp: allocation group description structure - * @minblocks: minimum extent block count - * - * ext3_trim_all_free walks through group's block bitmap searching for free - * blocks. When the free block is found, it tries to allocate this block and - * consequent free block to get the biggest free extent possible, until it - * reaches any used block. Then issue a TRIM command on this extent and free - * the extent in the block bitmap. This is done until whole group is scanned. - */ -static ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, - unsigned int group, - ext3_grpblk_t start, ext3_grpblk_t max, - ext3_grpblk_t minblocks) -{ - handle_t *handle; - ext3_grpblk_t next, free_blocks, bit, freed, count = 0; - ext3_fsblk_t discard_block; - struct ext3_sb_info *sbi; - struct buffer_head *gdp_bh, *bitmap_bh = NULL; - struct ext3_group_desc *gdp; - int err = 0, ret = 0; - - /* - * We will update one block bitmap, and one group descriptor - */ - handle = ext3_journal_start_sb(sb, 2); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - bitmap_bh = read_block_bitmap(sb, group); - if (!bitmap_bh) { - err = -EIO; - goto err_out; - } - - BUFFER_TRACE(bitmap_bh, "getting undo access"); - err = ext3_journal_get_undo_access(handle, bitmap_bh); - if (err) - goto err_out; - - gdp = ext3_get_group_desc(sb, group, &gdp_bh); - if (!gdp) { - err = -EIO; - goto err_out; - } - - BUFFER_TRACE(gdp_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, gdp_bh); - if (err) - goto err_out; - - free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); - sbi = EXT3_SB(sb); - - /* Walk through the whole group */ - while (start <= max) { - start = bitmap_search_next_usable_block(start, bitmap_bh, max); - if (start < 0) - break; - next = start; - - /* - * Allocate contiguous free extents by setting bits in the - * block bitmap - */ - while (next <= max - && claim_block(sb_bgl_lock(sbi, group), - next, bitmap_bh)) { - next++; - } - - /* We did not claim any blocks */ - if (next == start) - continue; - - discard_block = (ext3_fsblk_t)start + - ext3_group_first_block_no(sb, group); - - /* Update counters */ - spin_lock(sb_bgl_lock(sbi, group)); - le16_add_cpu(&gdp->bg_free_blocks_count, start - next); - spin_unlock(sb_bgl_lock(sbi, group)); - percpu_counter_sub(&sbi->s_freeblocks_counter, next - start); - - free_blocks -= next - start; - /* Do not issue a TRIM on extents smaller than minblocks */ - if ((next - start) < minblocks) - goto free_extent; - - trace_ext3_discard_blocks(sb, discard_block, next - start); - /* Send the TRIM command down to the device */ - err = sb_issue_discard(sb, discard_block, next - start, - GFP_NOFS, 0); - count += (next - start); -free_extent: - freed = 0; - - /* - * Clear bits in the bitmap - */ - for (bit = start; bit < next; bit++) { - BUFFER_TRACE(bitmap_bh, "clear bit"); - if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, group), - bit, bitmap_bh->b_data)) { - ext3_error(sb, __func__, - "bit already cleared for block "E3FSBLK, - (unsigned long)bit); - BUFFER_TRACE(bitmap_bh, "bit already cleared"); - } else { - freed++; - } - } - - /* Update couters */ - spin_lock(sb_bgl_lock(sbi, group)); - le16_add_cpu(&gdp->bg_free_blocks_count, freed); - spin_unlock(sb_bgl_lock(sbi, group)); - percpu_counter_add(&sbi->s_freeblocks_counter, freed); - - start = next; - if (err < 0) { - if (err != -EOPNOTSUPP) - ext3_warning(sb, __func__, "Discard command " - "returned error %d\n", err); - break; - } - - if (fatal_signal_pending(current)) { - err = -ERESTARTSYS; - break; - } - - cond_resched(); - - /* No more suitable extents */ - if (free_blocks < minblocks) - break; - } - - /* We dirtied the bitmap block */ - BUFFER_TRACE(bitmap_bh, "dirtied bitmap block"); - ret = ext3_journal_dirty_metadata(handle, bitmap_bh); - if (!err) - err = ret; - - /* And the group descriptor block */ - BUFFER_TRACE(gdp_bh, "dirtied group descriptor block"); - ret = ext3_journal_dirty_metadata(handle, gdp_bh); - if (!err) - err = ret; - - ext3_debug("trimmed %d blocks in the group %d\n", - count, group); - -err_out: - if (err) - count = err; - ext3_journal_stop(handle); - brelse(bitmap_bh); - - return count; -} - -/** - * ext3_trim_fs() -- trim ioctl handle function - * @sb: superblock for filesystem - * @start: First Byte to trim - * @len: number of Bytes to trim from start - * @minlen: minimum extent length in Bytes - * - * ext3_trim_fs goes through all allocation groups containing Bytes from - * start to start+len. For each such a group ext3_trim_all_free function - * is invoked to trim all free space. - */ -int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range) -{ - ext3_grpblk_t last_block, first_block; - unsigned long group, first_group, last_group; - struct ext3_group_desc *gdp; - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - uint64_t start, minlen, end, trimmed = 0; - ext3_fsblk_t first_data_blk = - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); - ext3_fsblk_t max_blks = le32_to_cpu(es->s_blocks_count); - int ret = 0; - - start = range->start >> sb->s_blocksize_bits; - end = start + (range->len >> sb->s_blocksize_bits) - 1; - minlen = range->minlen >> sb->s_blocksize_bits; - - if (unlikely(minlen > EXT3_BLOCKS_PER_GROUP(sb)) || - unlikely(start >= max_blks)) - return -EINVAL; - if (end >= max_blks) - end = max_blks - 1; - if (end <= first_data_blk) - goto out; - if (start < first_data_blk) - start = first_data_blk; - - smp_rmb(); - - /* Determine first and last group to examine based on start and len */ - ext3_get_group_no_and_offset(sb, (ext3_fsblk_t) start, - &first_group, &first_block); - ext3_get_group_no_and_offset(sb, (ext3_fsblk_t) end, - &last_group, &last_block); - - /* end now represents the last block to discard in this group */ - end = EXT3_BLOCKS_PER_GROUP(sb) - 1; - - for (group = first_group; group <= last_group; group++) { - gdp = ext3_get_group_desc(sb, group, NULL); - if (!gdp) - break; - - /* - * For all the groups except the last one, last block will - * always be EXT3_BLOCKS_PER_GROUP(sb)-1, so we only need to - * change it for the last group, note that last_block is - * already computed earlier by ext3_get_group_no_and_offset() - */ - if (group == last_group) - end = last_block; - - if (le16_to_cpu(gdp->bg_free_blocks_count) >= minlen) { - ret = ext3_trim_all_free(sb, group, first_block, - end, minlen); - if (ret < 0) - break; - trimmed += ret; - } - - /* - * For every group except the first one, we are sure - * that the first block to discard will be block #0. - */ - first_block = 0; - } - - if (ret > 0) - ret = 0; - -out: - range->len = trimmed * sb->s_blocksize; - return ret; -} diff --git a/ANDROID_3.4.5/fs/ext3/bitmap.c b/ANDROID_3.4.5/fs/ext3/bitmap.c deleted file mode 100644 index 909d13e2..00000000 --- a/ANDROID_3.4.5/fs/ext3/bitmap.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * linux/fs/ext3/bitmap.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - */ - -#include "ext3.h" - -#ifdef EXT3FS_DEBUG - -static const int nibblemap[] = {4, 3, 3, 2, 3, 2, 2, 1, 3, 2, 2, 1, 2, 1, 1, 0}; - -unsigned long ext3_count_free (struct buffer_head * map, unsigned int numchars) -{ - unsigned int i; - unsigned long sum = 0; - - if (!map) - return (0); - for (i = 0; i < numchars; i++) - sum += nibblemap[map->b_data[i] & 0xf] + - nibblemap[(map->b_data[i] >> 4) & 0xf]; - return (sum); -} - -#endif /* EXT3FS_DEBUG */ - diff --git a/ANDROID_3.4.5/fs/ext3/dir.c b/ANDROID_3.4.5/fs/ext3/dir.c deleted file mode 100644 index cc761ad8..00000000 --- a/ANDROID_3.4.5/fs/ext3/dir.c +++ /dev/null @@ -1,514 +0,0 @@ -/* - * linux/fs/ext3/dir.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/dir.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3 directory handling functions - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * - * Hash Tree Directory indexing (c) 2001 Daniel Phillips - * - */ - -#include "ext3.h" - -static unsigned char ext3_filetype_table[] = { - DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, DT_FIFO, DT_SOCK, DT_LNK -}; - -static int ext3_readdir(struct file *, void *, filldir_t); -static int ext3_dx_readdir(struct file * filp, - void * dirent, filldir_t filldir); -static int ext3_release_dir (struct inode * inode, - struct file * filp); - -const struct file_operations ext3_dir_operations = { - .llseek = generic_file_llseek, - .read = generic_read_dir, - .readdir = ext3_readdir, /* we take BKL. needed?*/ - .unlocked_ioctl = ext3_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = ext3_compat_ioctl, -#endif - .fsync = ext3_sync_file, /* BKL held */ - .release = ext3_release_dir, -}; - - -static unsigned char get_dtype(struct super_block *sb, int filetype) -{ - if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_FILETYPE) || - (filetype >= EXT3_FT_MAX)) - return DT_UNKNOWN; - - return (ext3_filetype_table[filetype]); -} - - -int ext3_check_dir_entry (const char * function, struct inode * dir, - struct ext3_dir_entry_2 * de, - struct buffer_head * bh, - unsigned long offset) -{ - const char * error_msg = NULL; - const int rlen = ext3_rec_len_from_disk(de->rec_len); - - if (unlikely(rlen < EXT3_DIR_REC_LEN(1))) - error_msg = "rec_len is smaller than minimal"; - else if (unlikely(rlen % 4 != 0)) - error_msg = "rec_len % 4 != 0"; - else if (unlikely(rlen < EXT3_DIR_REC_LEN(de->name_len))) - error_msg = "rec_len is too small for name_len"; - else if (unlikely((((char *) de - bh->b_data) + rlen > dir->i_sb->s_blocksize))) - error_msg = "directory entry across blocks"; - else if (unlikely(le32_to_cpu(de->inode) > - le32_to_cpu(EXT3_SB(dir->i_sb)->s_es->s_inodes_count))) - error_msg = "inode out of bounds"; - - if (unlikely(error_msg != NULL)) - ext3_error (dir->i_sb, function, - "bad entry in directory #%lu: %s - " - "offset=%lu, inode=%lu, rec_len=%d, name_len=%d", - dir->i_ino, error_msg, offset, - (unsigned long) le32_to_cpu(de->inode), - rlen, de->name_len); - - return error_msg == NULL ? 1 : 0; -} - -static int ext3_readdir(struct file * filp, - void * dirent, filldir_t filldir) -{ - int error = 0; - unsigned long offset; - int i, stored; - struct ext3_dir_entry_2 *de; - struct super_block *sb; - int err; - struct inode *inode = filp->f_path.dentry->d_inode; - int ret = 0; - int dir_has_error = 0; - - sb = inode->i_sb; - - if (EXT3_HAS_COMPAT_FEATURE(inode->i_sb, - EXT3_FEATURE_COMPAT_DIR_INDEX) && - ((EXT3_I(inode)->i_flags & EXT3_INDEX_FL) || - ((inode->i_size >> sb->s_blocksize_bits) == 1))) { - err = ext3_dx_readdir(filp, dirent, filldir); - if (err != ERR_BAD_DX_DIR) { - ret = err; - goto out; - } - /* - * We don't set the inode dirty flag since it's not - * critical that it get flushed back to the disk. - */ - EXT3_I(filp->f_path.dentry->d_inode)->i_flags &= ~EXT3_INDEX_FL; - } - stored = 0; - offset = filp->f_pos & (sb->s_blocksize - 1); - - while (!error && !stored && filp->f_pos < inode->i_size) { - unsigned long blk = filp->f_pos >> EXT3_BLOCK_SIZE_BITS(sb); - struct buffer_head map_bh; - struct buffer_head *bh = NULL; - - map_bh.b_state = 0; - err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0); - if (err > 0) { - pgoff_t index = map_bh.b_blocknr >> - (PAGE_CACHE_SHIFT - inode->i_blkbits); - if (!ra_has_index(&filp->f_ra, index)) - page_cache_sync_readahead( - sb->s_bdev->bd_inode->i_mapping, - &filp->f_ra, filp, - index, 1); - filp->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT; - bh = ext3_bread(NULL, inode, blk, 0, &err); - } - - /* - * We ignore I/O errors on directories so users have a chance - * of recovering data when there's a bad sector - */ - if (!bh) { - if (!dir_has_error) { - ext3_error(sb, __func__, "directory #%lu " - "contains a hole at offset %lld", - inode->i_ino, filp->f_pos); - dir_has_error = 1; - } - /* corrupt size? Maybe no more blocks to read */ - if (filp->f_pos > inode->i_blocks << 9) - break; - filp->f_pos += sb->s_blocksize - offset; - continue; - } - -revalidate: - /* If the dir block has changed since the last call to - * readdir(2), then we might be pointing to an invalid - * dirent right now. Scan from the start of the block - * to make sure. */ - if (filp->f_version != inode->i_version) { - for (i = 0; i < sb->s_blocksize && i < offset; ) { - de = (struct ext3_dir_entry_2 *) - (bh->b_data + i); - /* It's too expensive to do a full - * dirent test each time round this - * loop, but we do have to test at - * least that it is non-zero. A - * failure will be detected in the - * dirent test below. */ - if (ext3_rec_len_from_disk(de->rec_len) < - EXT3_DIR_REC_LEN(1)) - break; - i += ext3_rec_len_from_disk(de->rec_len); - } - offset = i; - filp->f_pos = (filp->f_pos & ~(sb->s_blocksize - 1)) - | offset; - filp->f_version = inode->i_version; - } - - while (!error && filp->f_pos < inode->i_size - && offset < sb->s_blocksize) { - de = (struct ext3_dir_entry_2 *) (bh->b_data + offset); - if (!ext3_check_dir_entry ("ext3_readdir", inode, de, - bh, offset)) { - /* On error, skip the f_pos to the - next block. */ - filp->f_pos = (filp->f_pos | - (sb->s_blocksize - 1)) + 1; - brelse (bh); - ret = stored; - goto out; - } - offset += ext3_rec_len_from_disk(de->rec_len); - if (le32_to_cpu(de->inode)) { - /* We might block in the next section - * if the data destination is - * currently swapped out. So, use a - * version stamp to detect whether or - * not the directory has been modified - * during the copy operation. - */ - u64 version = filp->f_version; - - error = filldir(dirent, de->name, - de->name_len, - filp->f_pos, - le32_to_cpu(de->inode), - get_dtype(sb, de->file_type)); - if (error) - break; - if (version != filp->f_version) - goto revalidate; - stored ++; - } - filp->f_pos += ext3_rec_len_from_disk(de->rec_len); - } - offset = 0; - brelse (bh); - } -out: - return ret; -} - -/* - * These functions convert from the major/minor hash to an f_pos - * value. - * - * Currently we only use major hash numer. This is unfortunate, but - * on 32-bit machines, the same VFS interface is used for lseek and - * llseek, so if we use the 64 bit offset, then the 32-bit versions of - * lseek/telldir/seekdir will blow out spectacularly, and from within - * the ext2 low-level routine, we don't know if we're being called by - * a 64-bit version of the system call or the 32-bit version of the - * system call. Worse yet, NFSv2 only allows for a 32-bit readdir - * cookie. Sigh. - */ -#define hash2pos(major, minor) (major >> 1) -#define pos2maj_hash(pos) ((pos << 1) & 0xffffffff) -#define pos2min_hash(pos) (0) - -/* - * This structure holds the nodes of the red-black tree used to store - * the directory entry in hash order. - */ -struct fname { - __u32 hash; - __u32 minor_hash; - struct rb_node rb_hash; - struct fname *next; - __u32 inode; - __u8 name_len; - __u8 file_type; - char name[0]; -}; - -/* - * This functoin implements a non-recursive way of freeing all of the - * nodes in the red-black tree. - */ -static void free_rb_tree_fname(struct rb_root *root) -{ - struct rb_node *n = root->rb_node; - struct rb_node *parent; - struct fname *fname; - - while (n) { - /* Do the node's children first */ - if (n->rb_left) { - n = n->rb_left; - continue; - } - if (n->rb_right) { - n = n->rb_right; - continue; - } - /* - * The node has no children; free it, and then zero - * out parent's link to it. Finally go to the - * beginning of the loop and try to free the parent - * node. - */ - parent = rb_parent(n); - fname = rb_entry(n, struct fname, rb_hash); - while (fname) { - struct fname * old = fname; - fname = fname->next; - kfree (old); - } - if (!parent) - *root = RB_ROOT; - else if (parent->rb_left == n) - parent->rb_left = NULL; - else if (parent->rb_right == n) - parent->rb_right = NULL; - n = parent; - } -} - - -static struct dir_private_info *ext3_htree_create_dir_info(loff_t pos) -{ - struct dir_private_info *p; - - p = kzalloc(sizeof(struct dir_private_info), GFP_KERNEL); - if (!p) - return NULL; - p->curr_hash = pos2maj_hash(pos); - p->curr_minor_hash = pos2min_hash(pos); - return p; -} - -void ext3_htree_free_dir_info(struct dir_private_info *p) -{ - free_rb_tree_fname(&p->root); - kfree(p); -} - -/* - * Given a directory entry, enter it into the fname rb tree. - */ -int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, - __u32 minor_hash, - struct ext3_dir_entry_2 *dirent) -{ - struct rb_node **p, *parent = NULL; - struct fname * fname, *new_fn; - struct dir_private_info *info; - int len; - - info = (struct dir_private_info *) dir_file->private_data; - p = &info->root.rb_node; - - /* Create and allocate the fname structure */ - len = sizeof(struct fname) + dirent->name_len + 1; - new_fn = kzalloc(len, GFP_KERNEL); - if (!new_fn) - return -ENOMEM; - new_fn->hash = hash; - new_fn->minor_hash = minor_hash; - new_fn->inode = le32_to_cpu(dirent->inode); - new_fn->name_len = dirent->name_len; - new_fn->file_type = dirent->file_type; - memcpy(new_fn->name, dirent->name, dirent->name_len); - new_fn->name[dirent->name_len] = 0; - - while (*p) { - parent = *p; - fname = rb_entry(parent, struct fname, rb_hash); - - /* - * If the hash and minor hash match up, then we put - * them on a linked list. This rarely happens... - */ - if ((new_fn->hash == fname->hash) && - (new_fn->minor_hash == fname->minor_hash)) { - new_fn->next = fname->next; - fname->next = new_fn; - return 0; - } - - if (new_fn->hash < fname->hash) - p = &(*p)->rb_left; - else if (new_fn->hash > fname->hash) - p = &(*p)->rb_right; - else if (new_fn->minor_hash < fname->minor_hash) - p = &(*p)->rb_left; - else /* if (new_fn->minor_hash > fname->minor_hash) */ - p = &(*p)->rb_right; - } - - rb_link_node(&new_fn->rb_hash, parent, p); - rb_insert_color(&new_fn->rb_hash, &info->root); - return 0; -} - - - -/* - * This is a helper function for ext3_dx_readdir. It calls filldir - * for all entres on the fname linked list. (Normally there is only - * one entry on the linked list, unless there are 62 bit hash collisions.) - */ -static int call_filldir(struct file * filp, void * dirent, - filldir_t filldir, struct fname *fname) -{ - struct dir_private_info *info = filp->private_data; - loff_t curr_pos; - struct inode *inode = filp->f_path.dentry->d_inode; - struct super_block * sb; - int error; - - sb = inode->i_sb; - - if (!fname) { - printk("call_filldir: called with null fname?!?\n"); - return 0; - } - curr_pos = hash2pos(fname->hash, fname->minor_hash); - while (fname) { - error = filldir(dirent, fname->name, - fname->name_len, curr_pos, - fname->inode, - get_dtype(sb, fname->file_type)); - if (error) { - filp->f_pos = curr_pos; - info->extra_fname = fname; - return error; - } - fname = fname->next; - } - return 0; -} - -static int ext3_dx_readdir(struct file * filp, - void * dirent, filldir_t filldir) -{ - struct dir_private_info *info = filp->private_data; - struct inode *inode = filp->f_path.dentry->d_inode; - struct fname *fname; - int ret; - - if (!info) { - info = ext3_htree_create_dir_info(filp->f_pos); - if (!info) - return -ENOMEM; - filp->private_data = info; - } - - if (filp->f_pos == EXT3_HTREE_EOF) - return 0; /* EOF */ - - /* Some one has messed with f_pos; reset the world */ - if (info->last_pos != filp->f_pos) { - free_rb_tree_fname(&info->root); - info->curr_node = NULL; - info->extra_fname = NULL; - info->curr_hash = pos2maj_hash(filp->f_pos); - info->curr_minor_hash = pos2min_hash(filp->f_pos); - } - - /* - * If there are any leftover names on the hash collision - * chain, return them first. - */ - if (info->extra_fname) { - if (call_filldir(filp, dirent, filldir, info->extra_fname)) - goto finished; - info->extra_fname = NULL; - goto next_node; - } else if (!info->curr_node) - info->curr_node = rb_first(&info->root); - - while (1) { - /* - * Fill the rbtree if we have no more entries, - * or the inode has changed since we last read in the - * cached entries. - */ - if ((!info->curr_node) || - (filp->f_version != inode->i_version)) { - info->curr_node = NULL; - free_rb_tree_fname(&info->root); - filp->f_version = inode->i_version; - ret = ext3_htree_fill_tree(filp, info->curr_hash, - info->curr_minor_hash, - &info->next_hash); - if (ret < 0) - return ret; - if (ret == 0) { - filp->f_pos = EXT3_HTREE_EOF; - break; - } - info->curr_node = rb_first(&info->root); - } - - fname = rb_entry(info->curr_node, struct fname, rb_hash); - info->curr_hash = fname->hash; - info->curr_minor_hash = fname->minor_hash; - if (call_filldir(filp, dirent, filldir, fname)) - break; - next_node: - info->curr_node = rb_next(info->curr_node); - if (info->curr_node) { - fname = rb_entry(info->curr_node, struct fname, - rb_hash); - info->curr_hash = fname->hash; - info->curr_minor_hash = fname->minor_hash; - } else { - if (info->next_hash == ~0) { - filp->f_pos = EXT3_HTREE_EOF; - break; - } - info->curr_hash = info->next_hash; - info->curr_minor_hash = 0; - } - } -finished: - info->last_pos = filp->f_pos; - return 0; -} - -static int ext3_release_dir (struct inode * inode, struct file * filp) -{ - if (filp->private_data) - ext3_htree_free_dir_info(filp->private_data); - - return 0; -} diff --git a/ANDROID_3.4.5/fs/ext3/ext3.h b/ANDROID_3.4.5/fs/ext3/ext3.h deleted file mode 100644 index b6515fd7..00000000 --- a/ANDROID_3.4.5/fs/ext3/ext3.h +++ /dev/null @@ -1,1322 +0,0 @@ -/* - * Written by Stephen C. Tweedie <sct@redhat.com>, 1999 - * - * Copyright 1998--1999 Red Hat corp --- All Rights Reserved - * - * This file is part of the Linux kernel and is made available under - * the terms of the GNU General Public License, version 2, or at your - * option, any later version, incorporated herein by reference. - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/include/linux/minix_fs.h - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#include <linux/fs.h> -#include <linux/jbd.h> -#include <linux/magic.h> -#include <linux/bug.h> -#include <linux/blockgroup_lock.h> - -/* - * The second extended filesystem constants/structures - */ - -/* - * Define EXT3FS_DEBUG to produce debug messages - */ -#undef EXT3FS_DEBUG - -/* - * Define EXT3_RESERVATION to reserve data blocks for expanding files - */ -#define EXT3_DEFAULT_RESERVE_BLOCKS 8 -/*max window size: 1024(direct blocks) + 3([t,d]indirect blocks) */ -#define EXT3_MAX_RESERVE_BLOCKS 1027 -#define EXT3_RESERVE_WINDOW_NOT_ALLOCATED 0 - -/* - * Debug code - */ -#ifdef EXT3FS_DEBUG -#define ext3_debug(f, a...) \ - do { \ - printk (KERN_DEBUG "EXT3-fs DEBUG (%s, %d): %s:", \ - __FILE__, __LINE__, __func__); \ - printk (KERN_DEBUG f, ## a); \ - } while (0) -#else -#define ext3_debug(f, a...) do {} while (0) -#endif - -/* - * Special inodes numbers - */ -#define EXT3_BAD_INO 1 /* Bad blocks inode */ -#define EXT3_ROOT_INO 2 /* Root inode */ -#define EXT3_BOOT_LOADER_INO 5 /* Boot loader inode */ -#define EXT3_UNDEL_DIR_INO 6 /* Undelete directory inode */ -#define EXT3_RESIZE_INO 7 /* Reserved group descriptors inode */ -#define EXT3_JOURNAL_INO 8 /* Journal inode */ - -/* First non-reserved inode for old ext3 filesystems */ -#define EXT3_GOOD_OLD_FIRST_INO 11 - -/* - * Maximal count of links to a file - */ -#define EXT3_LINK_MAX 32000 - -/* - * Macro-instructions used to manage several block sizes - */ -#define EXT3_MIN_BLOCK_SIZE 1024 -#define EXT3_MAX_BLOCK_SIZE 65536 -#define EXT3_MIN_BLOCK_LOG_SIZE 10 -#define EXT3_BLOCK_SIZE(s) ((s)->s_blocksize) -#define EXT3_ADDR_PER_BLOCK(s) (EXT3_BLOCK_SIZE(s) / sizeof (__u32)) -#define EXT3_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) -#define EXT3_ADDR_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_addr_per_block_bits) -#define EXT3_INODE_SIZE(s) (EXT3_SB(s)->s_inode_size) -#define EXT3_FIRST_INO(s) (EXT3_SB(s)->s_first_ino) - -/* - * Macro-instructions used to manage fragments - */ -#define EXT3_MIN_FRAG_SIZE 1024 -#define EXT3_MAX_FRAG_SIZE 4096 -#define EXT3_MIN_FRAG_LOG_SIZE 10 -#define EXT3_FRAG_SIZE(s) (EXT3_SB(s)->s_frag_size) -#define EXT3_FRAGS_PER_BLOCK(s) (EXT3_SB(s)->s_frags_per_block) - -/* - * Structure of a blocks group descriptor - */ -struct ext3_group_desc -{ - __le32 bg_block_bitmap; /* Blocks bitmap block */ - __le32 bg_inode_bitmap; /* Inodes bitmap block */ - __le32 bg_inode_table; /* Inodes table block */ - __le16 bg_free_blocks_count; /* Free blocks count */ - __le16 bg_free_inodes_count; /* Free inodes count */ - __le16 bg_used_dirs_count; /* Directories count */ - __u16 bg_pad; - __le32 bg_reserved[3]; -}; - -/* - * Macro-instructions used to manage group descriptors - */ -#define EXT3_BLOCKS_PER_GROUP(s) (EXT3_SB(s)->s_blocks_per_group) -#define EXT3_DESC_PER_BLOCK(s) (EXT3_SB(s)->s_desc_per_block) -#define EXT3_INODES_PER_GROUP(s) (EXT3_SB(s)->s_inodes_per_group) -#define EXT3_DESC_PER_BLOCK_BITS(s) (EXT3_SB(s)->s_desc_per_block_bits) - -/* - * Constants relative to the data blocks - */ -#define EXT3_NDIR_BLOCKS 12 -#define EXT3_IND_BLOCK EXT3_NDIR_BLOCKS -#define EXT3_DIND_BLOCK (EXT3_IND_BLOCK + 1) -#define EXT3_TIND_BLOCK (EXT3_DIND_BLOCK + 1) -#define EXT3_N_BLOCKS (EXT3_TIND_BLOCK + 1) - -/* - * Inode flags - */ -#define EXT3_SECRM_FL 0x00000001 /* Secure deletion */ -#define EXT3_UNRM_FL 0x00000002 /* Undelete */ -#define EXT3_COMPR_FL 0x00000004 /* Compress file */ -#define EXT3_SYNC_FL 0x00000008 /* Synchronous updates */ -#define EXT3_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define EXT3_APPEND_FL 0x00000020 /* writes to file may only append */ -#define EXT3_NODUMP_FL 0x00000040 /* do not dump file */ -#define EXT3_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define EXT3_DIRTY_FL 0x00000100 -#define EXT3_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define EXT3_NOCOMPR_FL 0x00000400 /* Don't compress */ -#define EXT3_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define EXT3_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define EXT3_IMAGIC_FL 0x00002000 /* AFS directory */ -#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */ -#define EXT3_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define EXT3_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define EXT3_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define EXT3_RESERVED_FL 0x80000000 /* reserved for ext3 lib */ - -#define EXT3_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define EXT3_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - -/* Flags that should be inherited by new inodes from their parent. */ -#define EXT3_FL_INHERITED (EXT3_SECRM_FL | EXT3_UNRM_FL | EXT3_COMPR_FL |\ - EXT3_SYNC_FL | EXT3_NODUMP_FL |\ - EXT3_NOATIME_FL | EXT3_COMPRBLK_FL |\ - EXT3_NOCOMPR_FL | EXT3_JOURNAL_DATA_FL |\ - EXT3_NOTAIL_FL | EXT3_DIRSYNC_FL) - -/* Flags that are appropriate for regular files (all but dir-specific ones). */ -#define EXT3_REG_FLMASK (~(EXT3_DIRSYNC_FL | EXT3_TOPDIR_FL)) - -/* Flags that are appropriate for non-directories/regular files. */ -#define EXT3_OTHER_FLMASK (EXT3_NODUMP_FL | EXT3_NOATIME_FL) - -/* Mask out flags that are inappropriate for the given type of inode. */ -static inline __u32 ext3_mask_flags(umode_t mode, __u32 flags) -{ - if (S_ISDIR(mode)) - return flags; - else if (S_ISREG(mode)) - return flags & EXT3_REG_FLMASK; - else - return flags & EXT3_OTHER_FLMASK; -} - -/* Used to pass group descriptor data when online resize is done */ -struct ext3_new_group_input { - __u32 group; /* Group number for this data */ - __u32 block_bitmap; /* Absolute block number of block bitmap */ - __u32 inode_bitmap; /* Absolute block number of inode bitmap */ - __u32 inode_table; /* Absolute block number of inode table start */ - __u32 blocks_count; /* Total number of blocks in this group */ - __u16 reserved_blocks; /* Number of reserved blocks in this group */ - __u16 unused; -}; - -/* The struct ext3_new_group_input in kernel space, with free_blocks_count */ -struct ext3_new_group_data { - __u32 group; - __u32 block_bitmap; - __u32 inode_bitmap; - __u32 inode_table; - __u32 blocks_count; - __u16 reserved_blocks; - __u16 unused; - __u32 free_blocks_count; -}; - - -/* - * ioctl commands - */ -#define EXT3_IOC_GETFLAGS FS_IOC_GETFLAGS -#define EXT3_IOC_SETFLAGS FS_IOC_SETFLAGS -#define EXT3_IOC_GETVERSION _IOR('f', 3, long) -#define EXT3_IOC_SETVERSION _IOW('f', 4, long) -#define EXT3_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long) -#define EXT3_IOC_GROUP_ADD _IOW('f', 8,struct ext3_new_group_input) -#define EXT3_IOC_GETVERSION_OLD FS_IOC_GETVERSION -#define EXT3_IOC_SETVERSION_OLD FS_IOC_SETVERSION -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC_WAIT_FOR_READONLY _IOR('f', 99, long) -#endif -#define EXT3_IOC_GETRSVSZ _IOR('f', 5, long) -#define EXT3_IOC_SETRSVSZ _IOW('f', 6, long) - -/* - * ioctl commands in 32 bit emulation - */ -#define EXT3_IOC32_GETFLAGS FS_IOC32_GETFLAGS -#define EXT3_IOC32_SETFLAGS FS_IOC32_SETFLAGS -#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) -#define EXT3_IOC32_SETVERSION _IOW('f', 4, int) -#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) -#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) -#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) -#ifdef CONFIG_JBD_DEBUG -#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) -#endif -#define EXT3_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION -#define EXT3_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION - - -/* - * Mount options - */ -struct ext3_mount_options { - unsigned long s_mount_opt; - uid_t s_resuid; - gid_t s_resgid; - unsigned long s_commit_interval; -#ifdef CONFIG_QUOTA - int s_jquota_fmt; - char *s_qf_names[MAXQUOTAS]; -#endif -}; - -/* - * Structure of an inode on the disk - */ -struct ext3_inode { - __le16 i_mode; /* File mode */ - __le16 i_uid; /* Low 16 bits of Owner Uid */ - __le32 i_size; /* Size in bytes */ - __le32 i_atime; /* Access time */ - __le32 i_ctime; /* Creation time */ - __le32 i_mtime; /* Modification time */ - __le32 i_dtime; /* Deletion Time */ - __le16 i_gid; /* Low 16 bits of Group Id */ - __le16 i_links_count; /* Links count */ - __le32 i_blocks; /* Blocks count */ - __le32 i_flags; /* File flags */ - union { - struct { - __u32 l_i_reserved1; - } linux1; - struct { - __u32 h_i_translator; - } hurd1; - struct { - __u32 m_i_reserved1; - } masix1; - } osd1; /* OS dependent 1 */ - __le32 i_block[EXT3_N_BLOCKS];/* Pointers to blocks */ - __le32 i_generation; /* File version (for NFS) */ - __le32 i_file_acl; /* File ACL */ - __le32 i_dir_acl; /* Directory ACL */ - __le32 i_faddr; /* Fragment address */ - union { - struct { - __u8 l_i_frag; /* Fragment number */ - __u8 l_i_fsize; /* Fragment size */ - __u16 i_pad1; - __le16 l_i_uid_high; /* these 2 fields */ - __le16 l_i_gid_high; /* were reserved2[0] */ - __u32 l_i_reserved2; - } linux2; - struct { - __u8 h_i_frag; /* Fragment number */ - __u8 h_i_fsize; /* Fragment size */ - __u16 h_i_mode_high; - __u16 h_i_uid_high; - __u16 h_i_gid_high; - __u32 h_i_author; - } hurd2; - struct { - __u8 m_i_frag; /* Fragment number */ - __u8 m_i_fsize; /* Fragment size */ - __u16 m_pad1; - __u32 m_i_reserved2[2]; - } masix2; - } osd2; /* OS dependent 2 */ - __le16 i_extra_isize; - __le16 i_pad1; -}; - -#define i_size_high i_dir_acl - -#define i_reserved1 osd1.linux1.l_i_reserved1 -#define i_frag osd2.linux2.l_i_frag -#define i_fsize osd2.linux2.l_i_fsize -#define i_uid_low i_uid -#define i_gid_low i_gid -#define i_uid_high osd2.linux2.l_i_uid_high -#define i_gid_high osd2.linux2.l_i_gid_high -#define i_reserved2 osd2.linux2.l_i_reserved2 - -/* - * File system states - */ -#define EXT3_VALID_FS 0x0001 /* Unmounted cleanly */ -#define EXT3_ERROR_FS 0x0002 /* Errors detected */ -#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */ - -/* - * Misc. filesystem flags - */ -#define EXT2_FLAGS_SIGNED_HASH 0x0001 /* Signed dirhash in use */ -#define EXT2_FLAGS_UNSIGNED_HASH 0x0002 /* Unsigned dirhash in use */ -#define EXT2_FLAGS_TEST_FILESYS 0x0004 /* to test development code */ - -/* - * Mount flags - */ -#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */ -/* EXT3_MOUNT_OLDALLOC was there */ -#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */ -#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */ -#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */ -#define EXT3_MOUNT_ERRORS_RO 0x00020 /* Remount fs ro on errors */ -#define EXT3_MOUNT_ERRORS_PANIC 0x00040 /* Panic on errors */ -#define EXT3_MOUNT_MINIX_DF 0x00080 /* Mimics the Minix statfs */ -#define EXT3_MOUNT_NOLOAD 0x00100 /* Don't use existing journal*/ -#define EXT3_MOUNT_ABORT 0x00200 /* Fatal error detected */ -#define EXT3_MOUNT_DATA_FLAGS 0x00C00 /* Mode for data writes: */ -#define EXT3_MOUNT_JOURNAL_DATA 0x00400 /* Write data to journal */ -#define EXT3_MOUNT_ORDERED_DATA 0x00800 /* Flush data before commit */ -#define EXT3_MOUNT_WRITEBACK_DATA 0x00C00 /* No data ordering */ -#define EXT3_MOUNT_UPDATE_JOURNAL 0x01000 /* Update the journal format */ -#define EXT3_MOUNT_NO_UID32 0x02000 /* Disable 32-bit UIDs */ -#define EXT3_MOUNT_XATTR_USER 0x04000 /* Extended user attributes */ -#define EXT3_MOUNT_POSIX_ACL 0x08000 /* POSIX Access Control Lists */ -#define EXT3_MOUNT_RESERVATION 0x10000 /* Preallocation */ -#define EXT3_MOUNT_BARRIER 0x20000 /* Use block barriers */ -#define EXT3_MOUNT_QUOTA 0x80000 /* Some quota option set */ -#define EXT3_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ -#define EXT3_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ -#define EXT3_MOUNT_DATA_ERR_ABORT 0x400000 /* Abort on file data write - * error in ordered mode */ - -/* Compatibility, for having both ext2_fs.h and ext3_fs.h included at once */ -#ifndef _LINUX_EXT2_FS_H -#define clear_opt(o, opt) o &= ~EXT3_MOUNT_##opt -#define set_opt(o, opt) o |= EXT3_MOUNT_##opt -#define test_opt(sb, opt) (EXT3_SB(sb)->s_mount_opt & \ - EXT3_MOUNT_##opt) -#else -#define EXT2_MOUNT_NOLOAD EXT3_MOUNT_NOLOAD -#define EXT2_MOUNT_ABORT EXT3_MOUNT_ABORT -#define EXT2_MOUNT_DATA_FLAGS EXT3_MOUNT_DATA_FLAGS -#endif - -#define ext3_set_bit __set_bit_le -#define ext3_set_bit_atomic ext2_set_bit_atomic -#define ext3_clear_bit __clear_bit_le -#define ext3_clear_bit_atomic ext2_clear_bit_atomic -#define ext3_test_bit test_bit_le -#define ext3_find_next_zero_bit find_next_zero_bit_le - -/* - * Maximal mount counts between two filesystem checks - */ -#define EXT3_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */ -#define EXT3_DFL_CHECKINTERVAL 0 /* Don't use interval check */ - -/* - * Behaviour when detecting errors - */ -#define EXT3_ERRORS_CONTINUE 1 /* Continue execution */ -#define EXT3_ERRORS_RO 2 /* Remount fs read-only */ -#define EXT3_ERRORS_PANIC 3 /* Panic */ -#define EXT3_ERRORS_DEFAULT EXT3_ERRORS_CONTINUE - -/* - * Structure of the super block - */ -struct ext3_super_block { -/*00*/ __le32 s_inodes_count; /* Inodes count */ - __le32 s_blocks_count; /* Blocks count */ - __le32 s_r_blocks_count; /* Reserved blocks count */ - __le32 s_free_blocks_count; /* Free blocks count */ -/*10*/ __le32 s_free_inodes_count; /* Free inodes count */ - __le32 s_first_data_block; /* First Data Block */ - __le32 s_log_block_size; /* Block size */ - __le32 s_log_frag_size; /* Fragment size */ -/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */ - __le32 s_frags_per_group; /* # Fragments per group */ - __le32 s_inodes_per_group; /* # Inodes per group */ - __le32 s_mtime; /* Mount time */ -/*30*/ __le32 s_wtime; /* Write time */ - __le16 s_mnt_count; /* Mount count */ - __le16 s_max_mnt_count; /* Maximal mount count */ - __le16 s_magic; /* Magic signature */ - __le16 s_state; /* File system state */ - __le16 s_errors; /* Behaviour when detecting errors */ - __le16 s_minor_rev_level; /* minor revision level */ -/*40*/ __le32 s_lastcheck; /* time of last check */ - __le32 s_checkinterval; /* max. time between checks */ - __le32 s_creator_os; /* OS */ - __le32 s_rev_level; /* Revision level */ -/*50*/ __le16 s_def_resuid; /* Default uid for reserved blocks */ - __le16 s_def_resgid; /* Default gid for reserved blocks */ - /* - * These fields are for EXT3_DYNAMIC_REV superblocks only. - * - * Note: the difference between the compatible feature set and - * the incompatible feature set is that if there is a bit set - * in the incompatible feature set that the kernel doesn't - * know about, it should refuse to mount the filesystem. - * - * e2fsck's requirements are more strict; if it doesn't know - * about a feature in either the compatible or incompatible - * feature set, it must abort and not try to meddle with - * things it doesn't understand... - */ - __le32 s_first_ino; /* First non-reserved inode */ - __le16 s_inode_size; /* size of inode structure */ - __le16 s_block_group_nr; /* block group # of this superblock */ - __le32 s_feature_compat; /* compatible feature set */ -/*60*/ __le32 s_feature_incompat; /* incompatible feature set */ - __le32 s_feature_ro_compat; /* readonly-compatible feature set */ -/*68*/ __u8 s_uuid[16]; /* 128-bit uuid for volume */ -/*78*/ char s_volume_name[16]; /* volume name */ -/*88*/ char s_last_mounted[64]; /* directory where last mounted */ -/*C8*/ __le32 s_algorithm_usage_bitmap; /* For compression */ - /* - * Performance hints. Directory preallocation should only - * happen if the EXT3_FEATURE_COMPAT_DIR_PREALLOC flag is on. - */ - __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/ - __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */ - __le16 s_reserved_gdt_blocks; /* Per group desc for online growth */ - /* - * Journaling support valid if EXT3_FEATURE_COMPAT_HAS_JOURNAL set. - */ -/*D0*/ __u8 s_journal_uuid[16]; /* uuid of journal superblock */ -/*E0*/ __le32 s_journal_inum; /* inode number of journal file */ - __le32 s_journal_dev; /* device number of journal file */ - __le32 s_last_orphan; /* start of list of inodes to delete */ - __le32 s_hash_seed[4]; /* HTREE hash seed */ - __u8 s_def_hash_version; /* Default hash version to use */ - __u8 s_reserved_char_pad; - __u16 s_reserved_word_pad; - __le32 s_default_mount_opts; - __le32 s_first_meta_bg; /* First metablock block group */ - __le32 s_mkfs_time; /* When the filesystem was created */ - __le32 s_jnl_blocks[17]; /* Backup of the journal inode */ - /* 64bit support valid if EXT4_FEATURE_COMPAT_64BIT */ -/*150*/ __le32 s_blocks_count_hi; /* Blocks count */ - __le32 s_r_blocks_count_hi; /* Reserved blocks count */ - __le32 s_free_blocks_count_hi; /* Free blocks count */ - __le16 s_min_extra_isize; /* All inodes have at least # bytes */ - __le16 s_want_extra_isize; /* New inodes should reserve # bytes */ - __le32 s_flags; /* Miscellaneous flags */ - __le16 s_raid_stride; /* RAID stride */ - __le16 s_mmp_interval; /* # seconds to wait in MMP checking */ - __le64 s_mmp_block; /* Block for multi-mount protection */ - __le32 s_raid_stripe_width; /* blocks on all data disks (N*stride)*/ - __u8 s_log_groups_per_flex; /* FLEX_BG group size */ - __u8 s_reserved_char_pad2; - __le16 s_reserved_pad; - __u32 s_reserved[162]; /* Padding to the end of the block */ -}; - -/* data type for block offset of block group */ -typedef int ext3_grpblk_t; - -/* data type for filesystem-wide blocks number */ -typedef unsigned long ext3_fsblk_t; - -#define E3FSBLK "%lu" - -struct ext3_reserve_window { - ext3_fsblk_t _rsv_start; /* First byte reserved */ - ext3_fsblk_t _rsv_end; /* Last byte reserved or 0 */ -}; - -struct ext3_reserve_window_node { - struct rb_node rsv_node; - __u32 rsv_goal_size; - __u32 rsv_alloc_hit; - struct ext3_reserve_window rsv_window; -}; - -struct ext3_block_alloc_info { - /* information about reservation window */ - struct ext3_reserve_window_node rsv_window_node; - /* - * was i_next_alloc_block in ext3_inode_info - * is the logical (file-relative) number of the - * most-recently-allocated block in this file. - * We use this for detecting linearly ascending allocation requests. - */ - __u32 last_alloc_logical_block; - /* - * Was i_next_alloc_goal in ext3_inode_info - * is the *physical* companion to i_next_alloc_block. - * it the physical block number of the block which was most-recentl - * allocated to this file. This give us the goal (target) for the next - * allocation when we detect linearly ascending requests. - */ - ext3_fsblk_t last_alloc_physical_block; -}; - -#define rsv_start rsv_window._rsv_start -#define rsv_end rsv_window._rsv_end - -/* - * third extended file system inode data in memory - */ -struct ext3_inode_info { - __le32 i_data[15]; /* unconverted */ - __u32 i_flags; -#ifdef EXT3_FRAGMENTS - __u32 i_faddr; - __u8 i_frag_no; - __u8 i_frag_size; -#endif - ext3_fsblk_t i_file_acl; - __u32 i_dir_acl; - __u32 i_dtime; - - /* - * i_block_group is the number of the block group which contains - * this file's inode. Constant across the lifetime of the inode, - * it is ued for making block allocation decisions - we try to - * place a file's data blocks near its inode block, and new inodes - * near to their parent directory's inode. - */ - __u32 i_block_group; - unsigned long i_state_flags; /* Dynamic state flags for ext3 */ - - /* block reservation info */ - struct ext3_block_alloc_info *i_block_alloc_info; - - __u32 i_dir_start_lookup; -#ifdef CONFIG_EXT3_FS_XATTR - /* - * Extended attributes can be read independently of the main file - * data. Taking i_mutex even when reading would cause contention - * between readers of EAs and writers of regular file data, so - * instead we synchronize on xattr_sem when reading or changing - * EAs. - */ - struct rw_semaphore xattr_sem; -#endif - - struct list_head i_orphan; /* unlinked but open inodes */ - - /* - * i_disksize keeps track of what the inode size is ON DISK, not - * in memory. During truncate, i_size is set to the new size by - * the VFS prior to calling ext3_truncate(), but the filesystem won't - * set i_disksize to 0 until the truncate is actually under way. - * - * The intent is that i_disksize always represents the blocks which - * are used by this file. This allows recovery to restart truncate - * on orphans if we crash during truncate. We actually write i_disksize - * into the on-disk inode when writing inodes out, instead of i_size. - * - * The only time when i_disksize and i_size may be different is when - * a truncate is in progress. The only things which change i_disksize - * are ext3_get_block (growth) and ext3_truncate (shrinkth). - */ - loff_t i_disksize; - - /* on-disk additional length */ - __u16 i_extra_isize; - - /* - * truncate_mutex is for serialising ext3_truncate() against - * ext3_getblock(). In the 2.4 ext2 design, great chunks of inode's - * data tree are chopped off during truncate. We can't do that in - * ext3 because whenever we perform intermediate commits during - * truncate, the inode and all the metadata blocks *must* be in a - * consistent state which allows truncation of the orphans to restart - * during recovery. Hence we must fix the get_block-vs-truncate race - * by other means, so we have truncate_mutex. - */ - struct mutex truncate_mutex; - - /* - * Transactions that contain inode's metadata needed to complete - * fsync and fdatasync, respectively. - */ - atomic_t i_sync_tid; - atomic_t i_datasync_tid; - - struct inode vfs_inode; -}; - -/* - * third extended-fs super-block data in memory - */ -struct ext3_sb_info { - unsigned long s_frag_size; /* Size of a fragment in bytes */ - unsigned long s_frags_per_block;/* Number of fragments per block */ - unsigned long s_inodes_per_block;/* Number of inodes per block */ - unsigned long s_frags_per_group;/* Number of fragments in a group */ - unsigned long s_blocks_per_group;/* Number of blocks in a group */ - unsigned long s_inodes_per_group;/* Number of inodes in a group */ - unsigned long s_itb_per_group; /* Number of inode table blocks per group */ - unsigned long s_gdb_count; /* Number of group descriptor blocks */ - unsigned long s_desc_per_block; /* Number of group descriptors per block */ - unsigned long s_groups_count; /* Number of groups in the fs */ - unsigned long s_overhead_last; /* Last calculated overhead */ - unsigned long s_blocks_last; /* Last seen block count */ - struct buffer_head * s_sbh; /* Buffer containing the super block */ - struct ext3_super_block * s_es; /* Pointer to the super block in the buffer */ - struct buffer_head ** s_group_desc; - unsigned long s_mount_opt; - ext3_fsblk_t s_sb_block; - uid_t s_resuid; - gid_t s_resgid; - unsigned short s_mount_state; - unsigned short s_pad; - int s_addr_per_block_bits; - int s_desc_per_block_bits; - int s_inode_size; - int s_first_ino; - spinlock_t s_next_gen_lock; - u32 s_next_generation; - u32 s_hash_seed[4]; - int s_def_hash_version; - int s_hash_unsigned; /* 3 if hash should be signed, 0 if not */ - struct percpu_counter s_freeblocks_counter; - struct percpu_counter s_freeinodes_counter; - struct percpu_counter s_dirs_counter; - struct blockgroup_lock *s_blockgroup_lock; - - /* root of the per fs reservation window tree */ - spinlock_t s_rsv_window_lock; - struct rb_root s_rsv_window_root; - struct ext3_reserve_window_node s_rsv_window_head; - - /* Journaling */ - struct inode * s_journal_inode; - struct journal_s * s_journal; - struct list_head s_orphan; - struct mutex s_orphan_lock; - struct mutex s_resize_lock; - unsigned long s_commit_interval; - struct block_device *journal_bdev; -#ifdef CONFIG_QUOTA - char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */ - int s_jquota_fmt; /* Format of quota to use */ -#endif -}; - -static inline spinlock_t * -sb_bgl_lock(struct ext3_sb_info *sbi, unsigned int block_group) -{ - return bgl_lock_ptr(sbi->s_blockgroup_lock, block_group); -} - -static inline struct ext3_sb_info * EXT3_SB(struct super_block *sb) -{ - return sb->s_fs_info; -} -static inline struct ext3_inode_info *EXT3_I(struct inode *inode) -{ - return container_of(inode, struct ext3_inode_info, vfs_inode); -} - -static inline int ext3_valid_inum(struct super_block *sb, unsigned long ino) -{ - return ino == EXT3_ROOT_INO || - ino == EXT3_JOURNAL_INO || - ino == EXT3_RESIZE_INO || - (ino >= EXT3_FIRST_INO(sb) && - ino <= le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)); -} - -/* - * Inode dynamic state flags - */ -enum { - EXT3_STATE_JDATA, /* journaled data exists */ - EXT3_STATE_NEW, /* inode is newly created */ - EXT3_STATE_XATTR, /* has in-inode xattrs */ - EXT3_STATE_FLUSH_ON_CLOSE, /* flush dirty pages on close */ -}; - -static inline int ext3_test_inode_state(struct inode *inode, int bit) -{ - return test_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -static inline void ext3_set_inode_state(struct inode *inode, int bit) -{ - set_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -static inline void ext3_clear_inode_state(struct inode *inode, int bit) -{ - clear_bit(bit, &EXT3_I(inode)->i_state_flags); -} - -#define NEXT_ORPHAN(inode) EXT3_I(inode)->i_dtime - -/* - * Codes for operating systems - */ -#define EXT3_OS_LINUX 0 -#define EXT3_OS_HURD 1 -#define EXT3_OS_MASIX 2 -#define EXT3_OS_FREEBSD 3 -#define EXT3_OS_LITES 4 - -/* - * Revision levels - */ -#define EXT3_GOOD_OLD_REV 0 /* The good old (original) format */ -#define EXT3_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */ - -#define EXT3_CURRENT_REV EXT3_GOOD_OLD_REV -#define EXT3_MAX_SUPP_REV EXT3_DYNAMIC_REV - -#define EXT3_GOOD_OLD_INODE_SIZE 128 - -/* - * Feature set definitions - */ - -#define EXT3_HAS_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_RO_COMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_ro_compat & cpu_to_le32(mask) ) -#define EXT3_HAS_INCOMPAT_FEATURE(sb,mask) \ - ( EXT3_SB(sb)->s_es->s_feature_incompat & cpu_to_le32(mask) ) -#define EXT3_SET_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat |= cpu_to_le32(mask) -#define EXT3_SET_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat |= cpu_to_le32(mask) -#define EXT3_SET_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat |= cpu_to_le32(mask) -#define EXT3_CLEAR_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_RO_COMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_ro_compat &= ~cpu_to_le32(mask) -#define EXT3_CLEAR_INCOMPAT_FEATURE(sb,mask) \ - EXT3_SB(sb)->s_es->s_feature_incompat &= ~cpu_to_le32(mask) - -#define EXT3_FEATURE_COMPAT_DIR_PREALLOC 0x0001 -#define EXT3_FEATURE_COMPAT_IMAGIC_INODES 0x0002 -#define EXT3_FEATURE_COMPAT_HAS_JOURNAL 0x0004 -#define EXT3_FEATURE_COMPAT_EXT_ATTR 0x0008 -#define EXT3_FEATURE_COMPAT_RESIZE_INODE 0x0010 -#define EXT3_FEATURE_COMPAT_DIR_INDEX 0x0020 - -#define EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER 0x0001 -#define EXT3_FEATURE_RO_COMPAT_LARGE_FILE 0x0002 -#define EXT3_FEATURE_RO_COMPAT_BTREE_DIR 0x0004 - -#define EXT3_FEATURE_INCOMPAT_COMPRESSION 0x0001 -#define EXT3_FEATURE_INCOMPAT_FILETYPE 0x0002 -#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */ -#define EXT3_FEATURE_INCOMPAT_JOURNAL_DEV 0x0008 /* Journal device */ -#define EXT3_FEATURE_INCOMPAT_META_BG 0x0010 - -#define EXT3_FEATURE_COMPAT_SUPP EXT2_FEATURE_COMPAT_EXT_ATTR -#define EXT3_FEATURE_INCOMPAT_SUPP (EXT3_FEATURE_INCOMPAT_FILETYPE| \ - EXT3_FEATURE_INCOMPAT_RECOVER| \ - EXT3_FEATURE_INCOMPAT_META_BG) -#define EXT3_FEATURE_RO_COMPAT_SUPP (EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER| \ - EXT3_FEATURE_RO_COMPAT_LARGE_FILE| \ - EXT3_FEATURE_RO_COMPAT_BTREE_DIR) - -/* - * Default values for user and/or group using reserved blocks - */ -#define EXT3_DEF_RESUID 0 -#define EXT3_DEF_RESGID 0 - -/* - * Default mount options - */ -#define EXT3_DEFM_DEBUG 0x0001 -#define EXT3_DEFM_BSDGROUPS 0x0002 -#define EXT3_DEFM_XATTR_USER 0x0004 -#define EXT3_DEFM_ACL 0x0008 -#define EXT3_DEFM_UID16 0x0010 -#define EXT3_DEFM_JMODE 0x0060 -#define EXT3_DEFM_JMODE_DATA 0x0020 -#define EXT3_DEFM_JMODE_ORDERED 0x0040 -#define EXT3_DEFM_JMODE_WBACK 0x0060 - -/* - * Structure of a directory entry - */ -#define EXT3_NAME_LEN 255 - -struct ext3_dir_entry { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __le16 name_len; /* Name length */ - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * The new version of the directory entry. Since EXT3 structures are - * stored in intel byte order, and the name_len field could never be - * bigger than 255 chars, it's safe to reclaim the extra byte for the - * file_type field. - */ -struct ext3_dir_entry_2 { - __le32 inode; /* Inode number */ - __le16 rec_len; /* Directory entry length */ - __u8 name_len; /* Name length */ - __u8 file_type; - char name[EXT3_NAME_LEN]; /* File name */ -}; - -/* - * Ext3 directory file types. Only the low 3 bits are used. The - * other bits are reserved for now. - */ -#define EXT3_FT_UNKNOWN 0 -#define EXT3_FT_REG_FILE 1 -#define EXT3_FT_DIR 2 -#define EXT3_FT_CHRDEV 3 -#define EXT3_FT_BLKDEV 4 -#define EXT3_FT_FIFO 5 -#define EXT3_FT_SOCK 6 -#define EXT3_FT_SYMLINK 7 - -#define EXT3_FT_MAX 8 - -/* - * EXT3_DIR_PAD defines the directory entries boundaries - * - * NOTE: It must be a multiple of 4 - */ -#define EXT3_DIR_PAD 4 -#define EXT3_DIR_ROUND (EXT3_DIR_PAD - 1) -#define EXT3_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT3_DIR_ROUND) & \ - ~EXT3_DIR_ROUND) -#define EXT3_MAX_REC_LEN ((1<<16)-1) - -/* - * Tests against MAX_REC_LEN etc were put in place for 64k block - * sizes; if that is not possible on this arch, we can skip - * those tests and speed things up. - */ -static inline unsigned ext3_rec_len_from_disk(__le16 dlen) -{ - unsigned len = le16_to_cpu(dlen); - -#if (PAGE_CACHE_SIZE >= 65536) - if (len == EXT3_MAX_REC_LEN) - return 1 << 16; -#endif - return len; -} - -static inline __le16 ext3_rec_len_to_disk(unsigned len) -{ -#if (PAGE_CACHE_SIZE >= 65536) - if (len == (1 << 16)) - return cpu_to_le16(EXT3_MAX_REC_LEN); - else if (len > (1 << 16)) - BUG(); -#endif - return cpu_to_le16(len); -} - -/* - * Hash Tree Directory indexing - * (c) Daniel Phillips, 2001 - */ - -#define is_dx(dir) (EXT3_HAS_COMPAT_FEATURE(dir->i_sb, \ - EXT3_FEATURE_COMPAT_DIR_INDEX) && \ - (EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) -#define EXT3_DIR_LINK_MAX(dir) (!is_dx(dir) && (dir)->i_nlink >= EXT3_LINK_MAX) -#define EXT3_DIR_LINK_EMPTY(dir) ((dir)->i_nlink == 2 || (dir)->i_nlink == 1) - -/* Legal values for the dx_root hash_version field: */ - -#define DX_HASH_LEGACY 0 -#define DX_HASH_HALF_MD4 1 -#define DX_HASH_TEA 2 -#define DX_HASH_LEGACY_UNSIGNED 3 -#define DX_HASH_HALF_MD4_UNSIGNED 4 -#define DX_HASH_TEA_UNSIGNED 5 - -/* hash info structure used by the directory hash */ -struct dx_hash_info -{ - u32 hash; - u32 minor_hash; - int hash_version; - u32 *seed; -}; - -#define EXT3_HTREE_EOF 0x7fffffff - -/* - * Control parameters used by ext3_htree_next_block - */ -#define HASH_NB_ALWAYS 1 - - -/* - * Describe an inode's exact location on disk and in memory - */ -struct ext3_iloc -{ - struct buffer_head *bh; - unsigned long offset; - unsigned long block_group; -}; - -static inline struct ext3_inode *ext3_raw_inode(struct ext3_iloc *iloc) -{ - return (struct ext3_inode *) (iloc->bh->b_data + iloc->offset); -} - -/* - * This structure is stuffed into the struct file's private_data field - * for directories. It is where we put information so that we can do - * readdir operations in hash tree order. - */ -struct dir_private_info { - struct rb_root root; - struct rb_node *curr_node; - struct fname *extra_fname; - loff_t last_pos; - __u32 curr_hash; - __u32 curr_minor_hash; - __u32 next_hash; -}; - -/* calculate the first block number of the group */ -static inline ext3_fsblk_t -ext3_group_first_block_no(struct super_block *sb, unsigned long group_no) -{ - return group_no * (ext3_fsblk_t)EXT3_BLOCKS_PER_GROUP(sb) + - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block); -} - -/* - * Special error return code only used by dx_probe() and its callers. - */ -#define ERR_BAD_DX_DIR -75000 - -/* - * Function prototypes - */ - -/* - * Ok, these declarations are also in <linux/kernel.h> but none of the - * ext3 source programs needs to include it so they are duplicated here. - */ -# define NORET_TYPE /**/ -# define ATTRIB_NORET __attribute__((noreturn)) -# define NORET_AND noreturn, - -/* balloc.c */ -extern int ext3_bg_has_super(struct super_block *sb, int group); -extern unsigned long ext3_bg_num_gdb(struct super_block *sb, int group); -extern ext3_fsblk_t ext3_new_block (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int *errp); -extern ext3_fsblk_t ext3_new_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, unsigned long *count, int *errp); -extern void ext3_free_blocks (handle_t *handle, struct inode *inode, - ext3_fsblk_t block, unsigned long count); -extern void ext3_free_blocks_sb (handle_t *handle, struct super_block *sb, - ext3_fsblk_t block, unsigned long count, - unsigned long *pdquot_freed_blocks); -extern ext3_fsblk_t ext3_count_free_blocks (struct super_block *); -extern void ext3_check_blocks_bitmap (struct super_block *); -extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, - unsigned int block_group, - struct buffer_head ** bh); -extern int ext3_should_retry_alloc(struct super_block *sb, int *retries); -extern void ext3_init_block_alloc_info(struct inode *); -extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv); -extern int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range); - -/* dir.c */ -extern int ext3_check_dir_entry(const char *, struct inode *, - struct ext3_dir_entry_2 *, - struct buffer_head *, unsigned long); -extern int ext3_htree_store_dirent(struct file *dir_file, __u32 hash, - __u32 minor_hash, - struct ext3_dir_entry_2 *dirent); -extern void ext3_htree_free_dir_info(struct dir_private_info *p); - -/* fsync.c */ -extern int ext3_sync_file(struct file *, loff_t, loff_t, int); - -/* hash.c */ -extern int ext3fs_dirhash(const char *name, int len, struct - dx_hash_info *hinfo); - -/* ialloc.c */ -extern struct inode * ext3_new_inode (handle_t *, struct inode *, - const struct qstr *, umode_t); -extern void ext3_free_inode (handle_t *, struct inode *); -extern struct inode * ext3_orphan_get (struct super_block *, unsigned long); -extern unsigned long ext3_count_free_inodes (struct super_block *); -extern unsigned long ext3_count_dirs (struct super_block *); -extern void ext3_check_inodes_bitmap (struct super_block *); -extern unsigned long ext3_count_free (struct buffer_head *, unsigned); - - -/* inode.c */ -int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t blocknr); -struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *); -struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *); -int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, - sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result, - int create); - -extern struct inode *ext3_iget(struct super_block *, unsigned long); -extern int ext3_write_inode (struct inode *, struct writeback_control *); -extern int ext3_setattr (struct dentry *, struct iattr *); -extern void ext3_evict_inode (struct inode *); -extern int ext3_sync_inode (handle_t *, struct inode *); -extern void ext3_discard_reservation (struct inode *); -extern void ext3_dirty_inode(struct inode *, int); -extern int ext3_change_inode_journal_flag(struct inode *, int); -extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); -extern int ext3_can_truncate(struct inode *inode); -extern void ext3_truncate(struct inode *inode); -extern void ext3_set_inode_flags(struct inode *); -extern void ext3_get_inode_flags(struct ext3_inode_info *); -extern void ext3_set_aops(struct inode *inode); -extern int ext3_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, - u64 start, u64 len); - -/* ioctl.c */ -extern long ext3_ioctl(struct file *, unsigned int, unsigned long); -extern long ext3_compat_ioctl(struct file *, unsigned int, unsigned long); - -/* namei.c */ -extern int ext3_orphan_add(handle_t *, struct inode *); -extern int ext3_orphan_del(handle_t *, struct inode *); -extern int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, - __u32 start_minor_hash, __u32 *next_hash); - -/* resize.c */ -extern int ext3_group_add(struct super_block *sb, - struct ext3_new_group_data *input); -extern int ext3_group_extend(struct super_block *sb, - struct ext3_super_block *es, - ext3_fsblk_t n_blocks_count); - -/* super.c */ -extern __printf(3, 4) -void ext3_error(struct super_block *, const char *, const char *, ...); -extern void __ext3_std_error (struct super_block *, const char *, int); -extern __printf(3, 4) -void ext3_abort(struct super_block *, const char *, const char *, ...); -extern __printf(3, 4) -void ext3_warning(struct super_block *, const char *, const char *, ...); -extern __printf(3, 4) -void ext3_msg(struct super_block *, const char *, const char *, ...); -extern void ext3_update_dynamic_rev (struct super_block *sb); - -#define ext3_std_error(sb, errno) \ -do { \ - if ((errno)) \ - __ext3_std_error((sb), __func__, (errno)); \ -} while (0) - -/* - * Inodes and files operations - */ - -/* dir.c */ -extern const struct file_operations ext3_dir_operations; - -/* file.c */ -extern const struct inode_operations ext3_file_inode_operations; -extern const struct file_operations ext3_file_operations; - -/* namei.c */ -extern const struct inode_operations ext3_dir_inode_operations; -extern const struct inode_operations ext3_special_inode_operations; - -/* symlink.c */ -extern const struct inode_operations ext3_symlink_inode_operations; -extern const struct inode_operations ext3_fast_symlink_inode_operations; - -#define EXT3_JOURNAL(inode) (EXT3_SB((inode)->i_sb)->s_journal) - -/* Define the number of blocks we need to account to a transaction to - * modify one block of data. - * - * We may have to touch one inode, one bitmap buffer, up to three - * indirection blocks, the group and superblock summaries, and the data - * block to complete the transaction. */ - -#define EXT3_SINGLEDATA_TRANS_BLOCKS 8U - -/* Extended attribute operations touch at most two data buffers, - * two bitmap buffers, and two group summaries, in addition to the inode - * and the superblock, which are already accounted for. */ - -#define EXT3_XATTR_TRANS_BLOCKS 6U - -/* Define the minimum size for a transaction which modifies data. This - * needs to take into account the fact that we may end up modifying two - * quota files too (one for the group, one for the user quota). The - * superblock only gets updated once, of course, so don't bother - * counting that again for the quota updates. */ - -#define EXT3_DATA_TRANS_BLOCKS(sb) (EXT3_SINGLEDATA_TRANS_BLOCKS + \ - EXT3_XATTR_TRANS_BLOCKS - 2 + \ - EXT3_MAXQUOTAS_TRANS_BLOCKS(sb)) - -/* Delete operations potentially hit one directory's namespace plus an - * entire inode, plus arbitrary amounts of bitmap/indirection data. Be - * generous. We can grow the delete transaction later if necessary. */ - -#define EXT3_DELETE_TRANS_BLOCKS(sb) (EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) + 64) - -/* Define an arbitrary limit for the amount of data we will anticipate - * writing to any given transaction. For unbounded transactions such as - * write(2) and truncate(2) we can write more than this, but we always - * start off at the maximum transaction size and grow the transaction - * optimistically as we go. */ - -#define EXT3_MAX_TRANS_DATA 64U - -/* We break up a large truncate or write transaction once the handle's - * buffer credits gets this low, we need either to extend the - * transaction or to start a new one. Reserve enough space here for - * inode, bitmap, superblock, group and indirection updates for at least - * one block, plus two quota updates. Quota allocations are not - * needed. */ - -#define EXT3_RESERVE_TRANS_BLOCKS 12U - -#define EXT3_INDEX_EXTRA_TRANS_BLOCKS 8 - -#ifdef CONFIG_QUOTA -/* Amount of blocks needed for quota update - we know that the structure was - * allocated so we need to update only inode+data */ -#define EXT3_QUOTA_TRANS_BLOCKS(sb) (test_opt(sb, QUOTA) ? 2 : 0) -/* Amount of blocks needed for quota insert/delete - we do some block writes - * but inode, sb and group updates are done only once */ -#define EXT3_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_INIT_REWRITE) : 0) -#define EXT3_QUOTA_DEL_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_DEL_ALLOC*\ - (EXT3_SINGLEDATA_TRANS_BLOCKS-3)+3+DQUOT_DEL_REWRITE) : 0) -#else -#define EXT3_QUOTA_TRANS_BLOCKS(sb) 0 -#define EXT3_QUOTA_INIT_BLOCKS(sb) 0 -#define EXT3_QUOTA_DEL_BLOCKS(sb) 0 -#endif -#define EXT3_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_TRANS_BLOCKS(sb)) -#define EXT3_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_INIT_BLOCKS(sb)) -#define EXT3_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT3_QUOTA_DEL_BLOCKS(sb)) - -int -ext3_mark_iloc_dirty(handle_t *handle, - struct inode *inode, - struct ext3_iloc *iloc); - -/* - * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. - */ - -int ext3_reserve_inode_write(handle_t *handle, struct inode *inode, - struct ext3_iloc *iloc); - -int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode); - -/* - * Wrapper functions with which ext3 calls into JBD. The intent here is - * to allow these to be turned into appropriate stubs so ext3 can control - * ext2 filesystems, so ext2+ext3 systems only nee one fs. This work hasn't - * been done yet. - */ - -static inline void ext3_journal_release_buffer(handle_t *handle, - struct buffer_head *bh) -{ - journal_release_buffer(handle, bh); -} - -void ext3_journal_abort_handle(const char *caller, const char *err_fn, - struct buffer_head *bh, handle_t *handle, int err); - -int __ext3_journal_get_undo_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_get_write_access(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_forget(const char *where, handle_t *handle, - struct buffer_head *bh); - -int __ext3_journal_revoke(const char *where, handle_t *handle, - unsigned long blocknr, struct buffer_head *bh); - -int __ext3_journal_get_create_access(const char *where, - handle_t *handle, struct buffer_head *bh); - -int __ext3_journal_dirty_metadata(const char *where, - handle_t *handle, struct buffer_head *bh); - -#define ext3_journal_get_undo_access(handle, bh) \ - __ext3_journal_get_undo_access(__func__, (handle), (bh)) -#define ext3_journal_get_write_access(handle, bh) \ - __ext3_journal_get_write_access(__func__, (handle), (bh)) -#define ext3_journal_revoke(handle, blocknr, bh) \ - __ext3_journal_revoke(__func__, (handle), (blocknr), (bh)) -#define ext3_journal_get_create_access(handle, bh) \ - __ext3_journal_get_create_access(__func__, (handle), (bh)) -#define ext3_journal_dirty_metadata(handle, bh) \ - __ext3_journal_dirty_metadata(__func__, (handle), (bh)) -#define ext3_journal_forget(handle, bh) \ - __ext3_journal_forget(__func__, (handle), (bh)) - -int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh); - -handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks); -int __ext3_journal_stop(const char *where, handle_t *handle); - -static inline handle_t *ext3_journal_start(struct inode *inode, int nblocks) -{ - return ext3_journal_start_sb(inode->i_sb, nblocks); -} - -#define ext3_journal_stop(handle) \ - __ext3_journal_stop(__func__, (handle)) - -static inline handle_t *ext3_journal_current_handle(void) -{ - return journal_current_handle(); -} - -static inline int ext3_journal_extend(handle_t *handle, int nblocks) -{ - return journal_extend(handle, nblocks); -} - -static inline int ext3_journal_restart(handle_t *handle, int nblocks) -{ - return journal_restart(handle, nblocks); -} - -static inline int ext3_journal_blocks_per_page(struct inode *inode) -{ - return journal_blocks_per_page(inode); -} - -static inline int ext3_journal_force_commit(journal_t *journal) -{ - return journal_force_commit(journal); -} - -/* super.c */ -int ext3_force_commit(struct super_block *sb); - -static inline int ext3_should_journal_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 1; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) - return 1; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 1; - return 0; -} - -static inline int ext3_should_order_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) - return 1; - return 0; -} - -static inline int ext3_should_writeback_data(struct inode *inode) -{ - if (!S_ISREG(inode->i_mode)) - return 0; - if (EXT3_I(inode)->i_flags & EXT3_JOURNAL_DATA_FL) - return 0; - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) - return 1; - return 0; -} - -#include <trace/events/ext3.h> diff --git a/ANDROID_3.4.5/fs/ext3/ext3_jbd.c b/ANDROID_3.4.5/fs/ext3/ext3_jbd.c deleted file mode 100644 index 785a3261..00000000 --- a/ANDROID_3.4.5/fs/ext3/ext3_jbd.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Interface between ext3 and JBD - */ - -#include "ext3.h" - -int __ext3_journal_get_undo_access(const char *where, handle_t *handle, - struct buffer_head *bh) -{ - int err = journal_get_undo_access(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_get_write_access(const char *where, handle_t *handle, - struct buffer_head *bh) -{ - int err = journal_get_write_access(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_forget(const char *where, handle_t *handle, - struct buffer_head *bh) -{ - int err = journal_forget(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_revoke(const char *where, handle_t *handle, - unsigned long blocknr, struct buffer_head *bh) -{ - int err = journal_revoke(handle, blocknr, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_get_create_access(const char *where, - handle_t *handle, struct buffer_head *bh) -{ - int err = journal_get_create_access(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} - -int __ext3_journal_dirty_metadata(const char *where, - handle_t *handle, struct buffer_head *bh) -{ - int err = journal_dirty_metadata(handle, bh); - if (err) - ext3_journal_abort_handle(where, __func__, bh, handle,err); - return err; -} diff --git a/ANDROID_3.4.5/fs/ext3/file.c b/ANDROID_3.4.5/fs/ext3/file.c deleted file mode 100644 index 25cb4132..00000000 --- a/ANDROID_3.4.5/fs/ext3/file.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * linux/fs/ext3/file.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/file.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3 fs regular file handling primitives - * - * 64-bit file support on 64-bit platforms by Jakub Jelinek - * (jj@sunsite.ms.mff.cuni.cz) - */ - -#include <linux/quotaops.h> -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -/* - * Called when an inode is released. Note that this is different - * from ext3_file_open: open gets called at every open, but release - * gets called only when /all/ the files are closed. - */ -static int ext3_release_file (struct inode * inode, struct file * filp) -{ - if (ext3_test_inode_state(inode, EXT3_STATE_FLUSH_ON_CLOSE)) { - filemap_flush(inode->i_mapping); - ext3_clear_inode_state(inode, EXT3_STATE_FLUSH_ON_CLOSE); - } - /* if we are the last writer on the inode, drop the block reservation */ - if ((filp->f_mode & FMODE_WRITE) && - (atomic_read(&inode->i_writecount) == 1)) - { - mutex_lock(&EXT3_I(inode)->truncate_mutex); - ext3_discard_reservation(inode); - mutex_unlock(&EXT3_I(inode)->truncate_mutex); - } - if (is_dx(inode) && filp->private_data) - ext3_htree_free_dir_info(filp->private_data); - - return 0; -} - -const struct file_operations ext3_file_operations = { - .llseek = generic_file_llseek, - .read = do_sync_read, - .write = do_sync_write, - .aio_read = generic_file_aio_read, - .aio_write = generic_file_aio_write, - .unlocked_ioctl = ext3_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = ext3_compat_ioctl, -#endif - .mmap = generic_file_mmap, - .open = dquot_file_open, - .release = ext3_release_file, - .fsync = ext3_sync_file, - .splice_read = generic_file_splice_read, - .splice_write = generic_file_splice_write, -}; - -const struct inode_operations ext3_file_inode_operations = { - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif - .get_acl = ext3_get_acl, - .fiemap = ext3_fiemap, -}; - diff --git a/ANDROID_3.4.5/fs/ext3/fsync.c b/ANDROID_3.4.5/fs/ext3/fsync.c deleted file mode 100644 index d4dff278..00000000 --- a/ANDROID_3.4.5/fs/ext3/fsync.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * linux/fs/ext3/fsync.c - * - * Copyright (C) 1993 Stephen Tweedie (sct@redhat.com) - * from - * Copyright (C) 1992 Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * from - * linux/fs/minix/truncate.c Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3fs fsync primitive - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * - * Removed unnecessary code duplication for little endian machines - * and excessive __inline__s. - * Andi Kleen, 1997 - * - * Major simplications and cleanup - we only need to do the metadata, because - * we can depend on generic_block_fdatasync() to sync the data blocks. - */ - -#include <linux/blkdev.h> -#include <linux/writeback.h> -#include "ext3.h" - -/* - * akpm: A new design for ext3_sync_file(). - * - * This is only called from sys_fsync(), sys_fdatasync() and sys_msync(). - * There cannot be a transaction open by this task. - * Another task could have dirtied this inode. Its data can be in any - * state in the journalling system. - * - * What we do is just kick off a commit and wait on it. This will snapshot the - * inode to disk. - */ - -int ext3_sync_file(struct file *file, loff_t start, loff_t end, int datasync) -{ - struct inode *inode = file->f_mapping->host; - struct ext3_inode_info *ei = EXT3_I(inode); - journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; - int ret, needs_barrier = 0; - tid_t commit_tid; - - trace_ext3_sync_file_enter(file, datasync); - - if (inode->i_sb->s_flags & MS_RDONLY) - return 0; - - ret = filemap_write_and_wait_range(inode->i_mapping, start, end); - if (ret) - goto out; - - J_ASSERT(ext3_journal_current_handle() == NULL); - - /* - * data=writeback,ordered: - * The caller's filemap_fdatawrite()/wait will sync the data. - * Metadata is in the journal, we wait for a proper transaction - * to commit here. - * - * data=journal: - * filemap_fdatawrite won't do anything (the buffers are clean). - * ext3_force_commit will write the file data into the journal and - * will wait on that. - * filemap_fdatawait() will encounter a ton of newly-dirtied pages - * (they were dirtied by commit). But that's OK - the blocks are - * safe in-journal, which is all fsync() needs to ensure. - */ - if (ext3_should_journal_data(inode)) { - ret = ext3_force_commit(inode->i_sb); - goto out; - } - - if (datasync) - commit_tid = atomic_read(&ei->i_datasync_tid); - else - commit_tid = atomic_read(&ei->i_sync_tid); - - if (test_opt(inode->i_sb, BARRIER) && - !journal_trans_will_send_data_barrier(journal, commit_tid)) - needs_barrier = 1; - log_start_commit(journal, commit_tid); - ret = log_wait_commit(journal, commit_tid); - - /* - * In case we didn't commit a transaction, we have to flush - * disk caches manually so that data really is on persistent - * storage - */ - if (needs_barrier) - blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); -out: - trace_ext3_sync_file_exit(inode, ret); - return ret; -} diff --git a/ANDROID_3.4.5/fs/ext3/hash.c b/ANDROID_3.4.5/fs/ext3/hash.c deleted file mode 100644 index d10231dd..00000000 --- a/ANDROID_3.4.5/fs/ext3/hash.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * linux/fs/ext3/hash.c - * - * Copyright (C) 2002 by Theodore Ts'o - * - * This file is released under the GPL v2. - * - * This file may be redistributed under the terms of the GNU Public - * License. - */ - -#include "ext3.h" -#include <linux/cryptohash.h> - -#define DELTA 0x9E3779B9 - -static void TEA_transform(__u32 buf[4], __u32 const in[]) -{ - __u32 sum = 0; - __u32 b0 = buf[0], b1 = buf[1]; - __u32 a = in[0], b = in[1], c = in[2], d = in[3]; - int n = 16; - - do { - sum += DELTA; - b0 += ((b1 << 4)+a) ^ (b1+sum) ^ ((b1 >> 5)+b); - b1 += ((b0 << 4)+c) ^ (b0+sum) ^ ((b0 >> 5)+d); - } while(--n); - - buf[0] += b0; - buf[1] += b1; -} - - -/* The old legacy hash */ -static __u32 dx_hack_hash_unsigned(const char *name, int len) -{ - __u32 hash, hash0 = 0x12a3fe2d, hash1 = 0x37abe8f9; - const unsigned char *ucp = (const unsigned char *) name; - - while (len--) { - hash = hash1 + (hash0 ^ (((int) *ucp++) * 7152373)); - - if (hash & 0x80000000) - hash -= 0x7fffffff; - hash1 = hash0; - hash0 = hash; - } - return hash0 << 1; -} - -static __u32 dx_hack_hash_signed(const char *name, int len) -{ - __u32 hash, hash0 = 0x12a3fe2d, hash1 = 0x37abe8f9; - const signed char *scp = (const signed char *) name; - - while (len--) { - hash = hash1 + (hash0 ^ (((int) *scp++) * 7152373)); - - if (hash & 0x80000000) - hash -= 0x7fffffff; - hash1 = hash0; - hash0 = hash; - } - return hash0 << 1; -} - -static void str2hashbuf_signed(const char *msg, int len, __u32 *buf, int num) -{ - __u32 pad, val; - int i; - const signed char *scp = (const signed char *) msg; - - pad = (__u32)len | ((__u32)len << 8); - pad |= pad << 16; - - val = pad; - if (len > num*4) - len = num * 4; - for (i = 0; i < len; i++) { - if ((i % 4) == 0) - val = pad; - val = ((int) scp[i]) + (val << 8); - if ((i % 4) == 3) { - *buf++ = val; - val = pad; - num--; - } - } - if (--num >= 0) - *buf++ = val; - while (--num >= 0) - *buf++ = pad; -} - -static void str2hashbuf_unsigned(const char *msg, int len, __u32 *buf, int num) -{ - __u32 pad, val; - int i; - const unsigned char *ucp = (const unsigned char *) msg; - - pad = (__u32)len | ((__u32)len << 8); - pad |= pad << 16; - - val = pad; - if (len > num*4) - len = num * 4; - for (i=0; i < len; i++) { - if ((i % 4) == 0) - val = pad; - val = ((int) ucp[i]) + (val << 8); - if ((i % 4) == 3) { - *buf++ = val; - val = pad; - num--; - } - } - if (--num >= 0) - *buf++ = val; - while (--num >= 0) - *buf++ = pad; -} - -/* - * Returns the hash of a filename. If len is 0 and name is NULL, then - * this function can be used to test whether or not a hash version is - * supported. - * - * The seed is an 4 longword (32 bits) "secret" which can be used to - * uniquify a hash. If the seed is all zero's, then some default seed - * may be used. - * - * A particular hash version specifies whether or not the seed is - * represented, and whether or not the returned hash is 32 bits or 64 - * bits. 32 bit hashes will return 0 for the minor hash. - */ -int ext3fs_dirhash(const char *name, int len, struct dx_hash_info *hinfo) -{ - __u32 hash; - __u32 minor_hash = 0; - const char *p; - int i; - __u32 in[8], buf[4]; - void (*str2hashbuf)(const char *, int, __u32 *, int) = - str2hashbuf_signed; - - /* Initialize the default seed for the hash checksum functions */ - buf[0] = 0x67452301; - buf[1] = 0xefcdab89; - buf[2] = 0x98badcfe; - buf[3] = 0x10325476; - - /* Check to see if the seed is all zero's */ - if (hinfo->seed) { - for (i=0; i < 4; i++) { - if (hinfo->seed[i]) - break; - } - if (i < 4) - memcpy(buf, hinfo->seed, sizeof(buf)); - } - - switch (hinfo->hash_version) { - case DX_HASH_LEGACY_UNSIGNED: - hash = dx_hack_hash_unsigned(name, len); - break; - case DX_HASH_LEGACY: - hash = dx_hack_hash_signed(name, len); - break; - case DX_HASH_HALF_MD4_UNSIGNED: - str2hashbuf = str2hashbuf_unsigned; - case DX_HASH_HALF_MD4: - p = name; - while (len > 0) { - (*str2hashbuf)(p, len, in, 8); - half_md4_transform(buf, in); - len -= 32; - p += 32; - } - minor_hash = buf[2]; - hash = buf[1]; - break; - case DX_HASH_TEA_UNSIGNED: - str2hashbuf = str2hashbuf_unsigned; - case DX_HASH_TEA: - p = name; - while (len > 0) { - (*str2hashbuf)(p, len, in, 4); - TEA_transform(buf, in); - len -= 16; - p += 16; - } - hash = buf[0]; - minor_hash = buf[1]; - break; - default: - hinfo->hash = 0; - return -1; - } - hash = hash & ~1; - if (hash == (EXT3_HTREE_EOF << 1)) - hash = (EXT3_HTREE_EOF-1) << 1; - hinfo->hash = hash; - hinfo->minor_hash = minor_hash; - return 0; -} diff --git a/ANDROID_3.4.5/fs/ext3/ialloc.c b/ANDROID_3.4.5/fs/ext3/ialloc.c deleted file mode 100644 index e3c39e4c..00000000 --- a/ANDROID_3.4.5/fs/ext3/ialloc.c +++ /dev/null @@ -1,722 +0,0 @@ -/* - * linux/fs/ext3/ialloc.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * BSD ufs-inspired inode and directory allocation by - * Stephen Tweedie (sct@redhat.com), 1993 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - */ - -#include <linux/quotaops.h> -#include <linux/random.h> - -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -/* - * ialloc.c contains the inodes allocation and deallocation routines - */ - -/* - * The free inodes are managed by bitmaps. A file system contains several - * blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap - * block for inodes, N blocks for the inode table and data blocks. - * - * The file system contains group descriptors which are located after the - * super block. Each descriptor contains the number of the bitmap block and - * the free blocks count in the block. - */ - - -/* - * Read the inode allocation bitmap for a given block_group, reading - * into the specified slot in the superblock's bitmap cache. - * - * Return buffer_head of bitmap on success or NULL. - */ -static struct buffer_head * -read_inode_bitmap(struct super_block * sb, unsigned long block_group) -{ - struct ext3_group_desc *desc; - struct buffer_head *bh = NULL; - - desc = ext3_get_group_desc(sb, block_group, NULL); - if (!desc) - goto error_out; - - bh = sb_bread(sb, le32_to_cpu(desc->bg_inode_bitmap)); - if (!bh) - ext3_error(sb, "read_inode_bitmap", - "Cannot read inode bitmap - " - "block_group = %lu, inode_bitmap = %u", - block_group, le32_to_cpu(desc->bg_inode_bitmap)); -error_out: - return bh; -} - -/* - * NOTE! When we get the inode, we're the only people - * that have access to it, and as such there are no - * race conditions we have to worry about. The inode - * is not on the hash-lists, and it cannot be reached - * through the filesystem because the directory entry - * has been deleted earlier. - * - * HOWEVER: we must make sure that we get no aliases, - * which means that we have to call "clear_inode()" - * _before_ we mark the inode not in use in the inode - * bitmaps. Otherwise a newly created file might use - * the same inode number (not actually the same pointer - * though), and then we'd have two inodes sharing the - * same inode number and space on the harddisk. - */ -void ext3_free_inode (handle_t *handle, struct inode * inode) -{ - struct super_block * sb = inode->i_sb; - int is_directory; - unsigned long ino; - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *bh2; - unsigned long block_group; - unsigned long bit; - struct ext3_group_desc * gdp; - struct ext3_super_block * es; - struct ext3_sb_info *sbi; - int fatal = 0, err; - - if (atomic_read(&inode->i_count) > 1) { - printk ("ext3_free_inode: inode has count=%d\n", - atomic_read(&inode->i_count)); - return; - } - if (inode->i_nlink) { - printk ("ext3_free_inode: inode has nlink=%d\n", - inode->i_nlink); - return; - } - if (!sb) { - printk("ext3_free_inode: inode on nonexistent device\n"); - return; - } - sbi = EXT3_SB(sb); - - ino = inode->i_ino; - ext3_debug ("freeing inode %lu\n", ino); - trace_ext3_free_inode(inode); - - is_directory = S_ISDIR(inode->i_mode); - - es = EXT3_SB(sb)->s_es; - if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) { - ext3_error (sb, "ext3_free_inode", - "reserved or nonexistent inode %lu", ino); - goto error_return; - } - block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); - bit = (ino - 1) % EXT3_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); - if (!bitmap_bh) - goto error_return; - - BUFFER_TRACE(bitmap_bh, "get_write_access"); - fatal = ext3_journal_get_write_access(handle, bitmap_bh); - if (fatal) - goto error_return; - - /* Ok, now we can actually update the inode bitmaps.. */ - if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), - bit, bitmap_bh->b_data)) - ext3_error (sb, "ext3_free_inode", - "bit already cleared for inode %lu", ino); - else { - gdp = ext3_get_group_desc (sb, block_group, &bh2); - - BUFFER_TRACE(bh2, "get_write_access"); - fatal = ext3_journal_get_write_access(handle, bh2); - if (fatal) goto error_return; - - if (gdp) { - spin_lock(sb_bgl_lock(sbi, block_group)); - le16_add_cpu(&gdp->bg_free_inodes_count, 1); - if (is_directory) - le16_add_cpu(&gdp->bg_used_dirs_count, -1); - spin_unlock(sb_bgl_lock(sbi, block_group)); - percpu_counter_inc(&sbi->s_freeinodes_counter); - if (is_directory) - percpu_counter_dec(&sbi->s_dirs_counter); - - } - BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh2); - if (!fatal) fatal = err; - } - BUFFER_TRACE(bitmap_bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bitmap_bh); - if (!fatal) - fatal = err; - -error_return: - brelse(bitmap_bh); - ext3_std_error(sb, fatal); -} - -/* - * Orlov's allocator for directories. - * - * We always try to spread first-level directories. - * - * If there are blockgroups with both free inodes and free blocks counts - * not worse than average we return one with smallest directory count. - * Otherwise we simply return a random group. - * - * For the rest rules look so: - * - * It's OK to put directory into a group unless - * it has too many directories already (max_dirs) or - * it has too few free inodes left (min_inodes) or - * it has too few free blocks left (min_blocks) or - * it's already running too large debt (max_debt). - * Parent's group is preferred, if it doesn't satisfy these - * conditions we search cyclically through the rest. If none - * of the groups look good we just look for a group with more - * free inodes than average (starting at parent's group). - * - * Debt is incremented each time we allocate a directory and decremented - * when we allocate an inode, within 0--255. - */ - -#define INODE_COST 64 -#define BLOCK_COST 256 - -static int find_group_orlov(struct super_block *sb, struct inode *parent) -{ - int parent_group = EXT3_I(parent)->i_block_group; - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - int ngroups = sbi->s_groups_count; - int inodes_per_group = EXT3_INODES_PER_GROUP(sb); - unsigned int freei, avefreei; - ext3_fsblk_t freeb, avefreeb; - ext3_fsblk_t blocks_per_dir; - unsigned int ndirs; - int max_debt, max_dirs, min_inodes; - ext3_grpblk_t min_blocks; - int group = -1, i; - struct ext3_group_desc *desc; - - freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter); - avefreei = freei / ngroups; - freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter); - avefreeb = freeb / ngroups; - ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter); - - if ((parent == sb->s_root->d_inode) || - (EXT3_I(parent)->i_flags & EXT3_TOPDIR_FL)) { - int best_ndir = inodes_per_group; - int best_group = -1; - - get_random_bytes(&group, sizeof(group)); - parent_group = (unsigned)group % ngroups; - for (i = 0; i < ngroups; i++) { - group = (parent_group + i) % ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (!desc || !desc->bg_free_inodes_count) - continue; - if (le16_to_cpu(desc->bg_used_dirs_count) >= best_ndir) - continue; - if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei) - continue; - if (le16_to_cpu(desc->bg_free_blocks_count) < avefreeb) - continue; - best_group = group; - best_ndir = le16_to_cpu(desc->bg_used_dirs_count); - } - if (best_group >= 0) - return best_group; - goto fallback; - } - - blocks_per_dir = (le32_to_cpu(es->s_blocks_count) - freeb) / ndirs; - - max_dirs = ndirs / ngroups + inodes_per_group / 16; - min_inodes = avefreei - inodes_per_group / 4; - min_blocks = avefreeb - EXT3_BLOCKS_PER_GROUP(sb) / 4; - - max_debt = EXT3_BLOCKS_PER_GROUP(sb) / max(blocks_per_dir, (ext3_fsblk_t)BLOCK_COST); - if (max_debt * INODE_COST > inodes_per_group) - max_debt = inodes_per_group / INODE_COST; - if (max_debt > 255) - max_debt = 255; - if (max_debt == 0) - max_debt = 1; - - for (i = 0; i < ngroups; i++) { - group = (parent_group + i) % ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (!desc || !desc->bg_free_inodes_count) - continue; - if (le16_to_cpu(desc->bg_used_dirs_count) >= max_dirs) - continue; - if (le16_to_cpu(desc->bg_free_inodes_count) < min_inodes) - continue; - if (le16_to_cpu(desc->bg_free_blocks_count) < min_blocks) - continue; - return group; - } - -fallback: - for (i = 0; i < ngroups; i++) { - group = (parent_group + i) % ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (!desc || !desc->bg_free_inodes_count) - continue; - if (le16_to_cpu(desc->bg_free_inodes_count) >= avefreei) - return group; - } - - if (avefreei) { - /* - * The free-inodes counter is approximate, and for really small - * filesystems the above test can fail to find any blockgroups - */ - avefreei = 0; - goto fallback; - } - - return -1; -} - -static int find_group_other(struct super_block *sb, struct inode *parent) -{ - int parent_group = EXT3_I(parent)->i_block_group; - int ngroups = EXT3_SB(sb)->s_groups_count; - struct ext3_group_desc *desc; - int group, i; - - /* - * Try to place the inode in its parent directory - */ - group = parent_group; - desc = ext3_get_group_desc (sb, group, NULL); - if (desc && le16_to_cpu(desc->bg_free_inodes_count) && - le16_to_cpu(desc->bg_free_blocks_count)) - return group; - - /* - * We're going to place this inode in a different blockgroup from its - * parent. We want to cause files in a common directory to all land in - * the same blockgroup. But we want files which are in a different - * directory which shares a blockgroup with our parent to land in a - * different blockgroup. - * - * So add our directory's i_ino into the starting point for the hash. - */ - group = (group + parent->i_ino) % ngroups; - - /* - * Use a quadratic hash to find a group with a free inode and some free - * blocks. - */ - for (i = 1; i < ngroups; i <<= 1) { - group += i; - if (group >= ngroups) - group -= ngroups; - desc = ext3_get_group_desc (sb, group, NULL); - if (desc && le16_to_cpu(desc->bg_free_inodes_count) && - le16_to_cpu(desc->bg_free_blocks_count)) - return group; - } - - /* - * That failed: try linear search for a free inode, even if that group - * has no free blocks. - */ - group = parent_group; - for (i = 0; i < ngroups; i++) { - if (++group >= ngroups) - group = 0; - desc = ext3_get_group_desc (sb, group, NULL); - if (desc && le16_to_cpu(desc->bg_free_inodes_count)) - return group; - } - - return -1; -} - -/* - * There are two policies for allocating an inode. If the new inode is - * a directory, then a forward search is made for a block group with both - * free space and a low directory-to-inode ratio; if that fails, then of - * the groups with above-average free space, that group with the fewest - * directories already is chosen. - * - * For other inodes, search forward from the parent directory's block - * group to find a free inode. - */ -struct inode *ext3_new_inode(handle_t *handle, struct inode * dir, - const struct qstr *qstr, umode_t mode) -{ - struct super_block *sb; - struct buffer_head *bitmap_bh = NULL; - struct buffer_head *bh2; - int group; - unsigned long ino = 0; - struct inode * inode; - struct ext3_group_desc * gdp = NULL; - struct ext3_super_block * es; - struct ext3_inode_info *ei; - struct ext3_sb_info *sbi; - int err = 0; - struct inode *ret; - int i; - - /* Cannot create files in a deleted directory */ - if (!dir || !dir->i_nlink) - return ERR_PTR(-EPERM); - - sb = dir->i_sb; - trace_ext3_request_inode(dir, mode); - inode = new_inode(sb); - if (!inode) - return ERR_PTR(-ENOMEM); - ei = EXT3_I(inode); - - sbi = EXT3_SB(sb); - es = sbi->s_es; - if (S_ISDIR(mode)) - group = find_group_orlov(sb, dir); - else - group = find_group_other(sb, dir); - - err = -ENOSPC; - if (group == -1) - goto out; - - for (i = 0; i < sbi->s_groups_count; i++) { - err = -EIO; - - gdp = ext3_get_group_desc(sb, group, &bh2); - if (!gdp) - goto fail; - - brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, group); - if (!bitmap_bh) - goto fail; - - ino = 0; - -repeat_in_this_group: - ino = ext3_find_next_zero_bit((unsigned long *) - bitmap_bh->b_data, EXT3_INODES_PER_GROUP(sb), ino); - if (ino < EXT3_INODES_PER_GROUP(sb)) { - - BUFFER_TRACE(bitmap_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bitmap_bh); - if (err) - goto fail; - - if (!ext3_set_bit_atomic(sb_bgl_lock(sbi, group), - ino, bitmap_bh->b_data)) { - /* we won it */ - BUFFER_TRACE(bitmap_bh, - "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, - bitmap_bh); - if (err) - goto fail; - goto got; - } - /* we lost it */ - journal_release_buffer(handle, bitmap_bh); - - if (++ino < EXT3_INODES_PER_GROUP(sb)) - goto repeat_in_this_group; - } - - /* - * This case is possible in concurrent environment. It is very - * rare. We cannot repeat the find_group_xxx() call because - * that will simply return the same blockgroup, because the - * group descriptor metadata has not yet been updated. - * So we just go onto the next blockgroup. - */ - if (++group == sbi->s_groups_count) - group = 0; - } - err = -ENOSPC; - goto out; - -got: - ino += group * EXT3_INODES_PER_GROUP(sb) + 1; - if (ino < EXT3_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) { - ext3_error (sb, "ext3_new_inode", - "reserved inode or inode > inodes count - " - "block_group = %d, inode=%lu", group, ino); - err = -EIO; - goto fail; - } - - BUFFER_TRACE(bh2, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh2); - if (err) goto fail; - spin_lock(sb_bgl_lock(sbi, group)); - le16_add_cpu(&gdp->bg_free_inodes_count, -1); - if (S_ISDIR(mode)) { - le16_add_cpu(&gdp->bg_used_dirs_count, 1); - } - spin_unlock(sb_bgl_lock(sbi, group)); - BUFFER_TRACE(bh2, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh2); - if (err) goto fail; - - percpu_counter_dec(&sbi->s_freeinodes_counter); - if (S_ISDIR(mode)) - percpu_counter_inc(&sbi->s_dirs_counter); - - - if (test_opt(sb, GRPID)) { - inode->i_mode = mode; - inode->i_uid = current_fsuid(); - inode->i_gid = dir->i_gid; - } else - inode_init_owner(inode, dir, mode); - - inode->i_ino = ino; - /* This is the optimal IO size (for stat), not the fs block size */ - inode->i_blocks = 0; - inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC; - - memset(ei->i_data, 0, sizeof(ei->i_data)); - ei->i_dir_start_lookup = 0; - ei->i_disksize = 0; - - ei->i_flags = - ext3_mask_flags(mode, EXT3_I(dir)->i_flags & EXT3_FL_INHERITED); -#ifdef EXT3_FRAGMENTS - ei->i_faddr = 0; - ei->i_frag_no = 0; - ei->i_frag_size = 0; -#endif - ei->i_file_acl = 0; - ei->i_dir_acl = 0; - ei->i_dtime = 0; - ei->i_block_alloc_info = NULL; - ei->i_block_group = group; - - ext3_set_inode_flags(inode); - if (IS_DIRSYNC(inode)) - handle->h_sync = 1; - if (insert_inode_locked(inode) < 0) { - /* - * Likely a bitmap corruption causing inode to be allocated - * twice. - */ - err = -EIO; - goto fail; - } - spin_lock(&sbi->s_next_gen_lock); - inode->i_generation = sbi->s_next_generation++; - spin_unlock(&sbi->s_next_gen_lock); - - ei->i_state_flags = 0; - ext3_set_inode_state(inode, EXT3_STATE_NEW); - - /* See comment in ext3_iget for explanation */ - if (ino >= EXT3_FIRST_INO(sb) + 1 && - EXT3_INODE_SIZE(sb) > EXT3_GOOD_OLD_INODE_SIZE) { - ei->i_extra_isize = - sizeof(struct ext3_inode) - EXT3_GOOD_OLD_INODE_SIZE; - } else { - ei->i_extra_isize = 0; - } - - ret = inode; - dquot_initialize(inode); - err = dquot_alloc_inode(inode); - if (err) - goto fail_drop; - - err = ext3_init_acl(handle, inode, dir); - if (err) - goto fail_free_drop; - - err = ext3_init_security(handle, inode, dir, qstr); - if (err) - goto fail_free_drop; - - err = ext3_mark_inode_dirty(handle, inode); - if (err) { - ext3_std_error(sb, err); - goto fail_free_drop; - } - - ext3_debug("allocating inode %lu\n", inode->i_ino); - trace_ext3_allocate_inode(inode, dir, mode); - goto really_out; -fail: - ext3_std_error(sb, err); -out: - iput(inode); - ret = ERR_PTR(err); -really_out: - brelse(bitmap_bh); - return ret; - -fail_free_drop: - dquot_free_inode(inode); - -fail_drop: - dquot_drop(inode); - inode->i_flags |= S_NOQUOTA; - clear_nlink(inode); - unlock_new_inode(inode); - iput(inode); - brelse(bitmap_bh); - return ERR_PTR(err); -} - -/* Verify that we are loading a valid orphan from disk */ -struct inode *ext3_orphan_get(struct super_block *sb, unsigned long ino) -{ - unsigned long max_ino = le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count); - unsigned long block_group; - int bit; - struct buffer_head *bitmap_bh; - struct inode *inode = NULL; - long err = -EIO; - - /* Error cases - e2fsck has already cleaned up for us */ - if (ino > max_ino) { - ext3_warning(sb, __func__, - "bad orphan ino %lu! e2fsck was run?", ino); - goto error; - } - - block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); - bit = (ino - 1) % EXT3_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); - if (!bitmap_bh) { - ext3_warning(sb, __func__, - "inode bitmap error for orphan %lu", ino); - goto error; - } - - /* Having the inode bit set should be a 100% indicator that this - * is a valid orphan (no e2fsck run on fs). Orphans also include - * inodes that were being truncated, so we can't check i_nlink==0. - */ - if (!ext3_test_bit(bit, bitmap_bh->b_data)) - goto bad_orphan; - - inode = ext3_iget(sb, ino); - if (IS_ERR(inode)) - goto iget_failed; - - /* - * If the orphans has i_nlinks > 0 then it should be able to be - * truncated, otherwise it won't be removed from the orphan list - * during processing and an infinite loop will result. - */ - if (inode->i_nlink && !ext3_can_truncate(inode)) - goto bad_orphan; - - if (NEXT_ORPHAN(inode) > max_ino) - goto bad_orphan; - brelse(bitmap_bh); - return inode; - -iget_failed: - err = PTR_ERR(inode); - inode = NULL; -bad_orphan: - ext3_warning(sb, __func__, - "bad orphan inode %lu! e2fsck was run?", ino); - printk(KERN_NOTICE "ext3_test_bit(bit=%d, block=%llu) = %d\n", - bit, (unsigned long long)bitmap_bh->b_blocknr, - ext3_test_bit(bit, bitmap_bh->b_data)); - printk(KERN_NOTICE "inode=%p\n", inode); - if (inode) { - printk(KERN_NOTICE "is_bad_inode(inode)=%d\n", - is_bad_inode(inode)); - printk(KERN_NOTICE "NEXT_ORPHAN(inode)=%u\n", - NEXT_ORPHAN(inode)); - printk(KERN_NOTICE "max_ino=%lu\n", max_ino); - printk(KERN_NOTICE "i_nlink=%u\n", inode->i_nlink); - /* Avoid freeing blocks if we got a bad deleted inode */ - if (inode->i_nlink == 0) - inode->i_blocks = 0; - iput(inode); - } - brelse(bitmap_bh); -error: - return ERR_PTR(err); -} - -unsigned long ext3_count_free_inodes (struct super_block * sb) -{ - unsigned long desc_count; - struct ext3_group_desc *gdp; - int i; -#ifdef EXT3FS_DEBUG - struct ext3_super_block *es; - unsigned long bitmap_count, x; - struct buffer_head *bitmap_bh = NULL; - - es = EXT3_SB(sb)->s_es; - desc_count = 0; - bitmap_count = 0; - gdp = NULL; - for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { - gdp = ext3_get_group_desc (sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_inodes_count); - brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, i); - if (!bitmap_bh) - continue; - - x = ext3_count_free(bitmap_bh, EXT3_INODES_PER_GROUP(sb) / 8); - printk("group %d: stored = %d, counted = %lu\n", - i, le16_to_cpu(gdp->bg_free_inodes_count), x); - bitmap_count += x; - } - brelse(bitmap_bh); - printk("ext3_count_free_inodes: stored = %u, computed = %lu, %lu\n", - le32_to_cpu(es->s_free_inodes_count), desc_count, bitmap_count); - return desc_count; -#else - desc_count = 0; - for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { - gdp = ext3_get_group_desc (sb, i, NULL); - if (!gdp) - continue; - desc_count += le16_to_cpu(gdp->bg_free_inodes_count); - cond_resched(); - } - return desc_count; -#endif -} - -/* Called at mount-time, super-block is locked */ -unsigned long ext3_count_dirs (struct super_block * sb) -{ - unsigned long count = 0; - int i; - - for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { - struct ext3_group_desc *gdp = ext3_get_group_desc (sb, i, NULL); - if (!gdp) - continue; - count += le16_to_cpu(gdp->bg_used_dirs_count); - } - return count; -} - diff --git a/ANDROID_3.4.5/fs/ext3/inode.c b/ANDROID_3.4.5/fs/ext3/inode.c deleted file mode 100644 index 10d7812f..00000000 --- a/ANDROID_3.4.5/fs/ext3/inode.c +++ /dev/null @@ -1,3593 +0,0 @@ -/* - * linux/fs/ext3/inode.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/inode.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Goal-directed block allocation by Stephen Tweedie - * (sct@redhat.com), 1993, 1998 - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * 64-bit file support on 64-bit platforms by Jakub Jelinek - * (jj@sunsite.ms.mff.cuni.cz) - * - * Assorted race fixes, rewrite of ext3_get_block() by Al Viro, 2000 - */ - -#include <linux/highuid.h> -#include <linux/quotaops.h> -#include <linux/writeback.h> -#include <linux/mpage.h> -#include <linux/namei.h> -#include "ext3.h" -#include "xattr.h" -#include "acl.h" - -static int ext3_writepage_trans_blocks(struct inode *inode); -static int ext3_block_truncate_page(struct inode *inode, loff_t from); - -/* - * Test whether an inode is a fast symlink. - */ -static int ext3_inode_is_fast_symlink(struct inode *inode) -{ - int ea_blocks = EXT3_I(inode)->i_file_acl ? - (inode->i_sb->s_blocksize >> 9) : 0; - - return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); -} - -/* - * The ext3 forget function must perform a revoke if we are freeing data - * which has been journaled. Metadata (eg. indirect blocks) must be - * revoked in all cases. - * - * "bh" may be NULL: a metadata block may have been freed from memory - * but there may still be a record of it in the journal, and that record - * still needs to be revoked. - */ -int ext3_forget(handle_t *handle, int is_metadata, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t blocknr) -{ - int err; - - might_sleep(); - - trace_ext3_forget(inode, is_metadata, blocknr); - BUFFER_TRACE(bh, "enter"); - - jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, " - "data mode %lx\n", - bh, is_metadata, inode->i_mode, - test_opt(inode->i_sb, DATA_FLAGS)); - - /* Never use the revoke function if we are doing full data - * journaling: there is no need to, and a V1 superblock won't - * support it. Otherwise, only skip the revoke on un-journaled - * data blocks. */ - - if (test_opt(inode->i_sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA || - (!is_metadata && !ext3_should_journal_data(inode))) { - if (bh) { - BUFFER_TRACE(bh, "call journal_forget"); - return ext3_journal_forget(handle, bh); - } - return 0; - } - - /* - * data!=journal && (is_metadata || should_journal_data(inode)) - */ - BUFFER_TRACE(bh, "call ext3_journal_revoke"); - err = ext3_journal_revoke(handle, blocknr, bh); - if (err) - ext3_abort(inode->i_sb, __func__, - "error %d when attempting revoke", err); - BUFFER_TRACE(bh, "exit"); - return err; -} - -/* - * Work out how many blocks we need to proceed with the next chunk of a - * truncate transaction. - */ -static unsigned long blocks_for_truncate(struct inode *inode) -{ - unsigned long needed; - - needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); - - /* Give ourselves just enough room to cope with inodes in which - * i_blocks is corrupt: we've seen disk corruptions in the past - * which resulted in random data in an inode which looked enough - * like a regular file for ext3 to try to delete it. Things - * will go a bit crazy if that happens, but at least we should - * try not to panic the whole kernel. */ - if (needed < 2) - needed = 2; - - /* But we need to bound the transaction so we don't overflow the - * journal. */ - if (needed > EXT3_MAX_TRANS_DATA) - needed = EXT3_MAX_TRANS_DATA; - - return EXT3_DATA_TRANS_BLOCKS(inode->i_sb) + needed; -} - -/* - * Truncate transactions can be complex and absolutely huge. So we need to - * be able to restart the transaction at a conventient checkpoint to make - * sure we don't overflow the journal. - * - * start_transaction gets us a new handle for a truncate transaction, - * and extend_transaction tries to extend the existing one a bit. If - * extend fails, we need to propagate the failure up and restart the - * transaction in the top-level truncate loop. --sct - */ -static handle_t *start_transaction(struct inode *inode) -{ - handle_t *result; - - result = ext3_journal_start(inode, blocks_for_truncate(inode)); - if (!IS_ERR(result)) - return result; - - ext3_std_error(inode->i_sb, PTR_ERR(result)); - return result; -} - -/* - * Try to extend this transaction for the purposes of truncation. - * - * Returns 0 if we managed to create more room. If we can't create more - * room, and the transaction must be restarted we return 1. - */ -static int try_to_extend_transaction(handle_t *handle, struct inode *inode) -{ - if (handle->h_buffer_credits > EXT3_RESERVE_TRANS_BLOCKS) - return 0; - if (!ext3_journal_extend(handle, blocks_for_truncate(inode))) - return 0; - return 1; -} - -/* - * Restart the transaction associated with *handle. This does a commit, - * so before we call here everything must be consistently dirtied against - * this transaction. - */ -static int truncate_restart_transaction(handle_t *handle, struct inode *inode) -{ - int ret; - - jbd_debug(2, "restarting handle %p\n", handle); - /* - * Drop truncate_mutex to avoid deadlock with ext3_get_blocks_handle - * At this moment, get_block can be called only for blocks inside - * i_size since page cache has been already dropped and writes are - * blocked by i_mutex. So we can safely drop the truncate_mutex. - */ - mutex_unlock(&EXT3_I(inode)->truncate_mutex); - ret = ext3_journal_restart(handle, blocks_for_truncate(inode)); - mutex_lock(&EXT3_I(inode)->truncate_mutex); - return ret; -} - -/* - * Called at inode eviction from icache - */ -void ext3_evict_inode (struct inode *inode) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_block_alloc_info *rsv; - handle_t *handle; - int want_delete = 0; - - trace_ext3_evict_inode(inode); - if (!inode->i_nlink && !is_bad_inode(inode)) { - dquot_initialize(inode); - want_delete = 1; - } - - /* - * When journalling data dirty buffers are tracked only in the journal. - * So although mm thinks everything is clean and ready for reaping the - * inode might still have some pages to write in the running - * transaction or waiting to be checkpointed. Thus calling - * journal_invalidatepage() (via truncate_inode_pages()) to discard - * these buffers can cause data loss. Also even if we did not discard - * these buffers, we would have no way to find them after the inode - * is reaped and thus user could see stale data if he tries to read - * them before the transaction is checkpointed. So be careful and - * force everything to disk here... We use ei->i_datasync_tid to - * store the newest transaction containing inode's data. - * - * Note that directories do not have this problem because they don't - * use page cache. - * - * The s_journal check handles the case when ext3_get_journal() fails - * and puts the journal inode. - */ - if (inode->i_nlink && ext3_should_journal_data(inode) && - EXT3_SB(inode->i_sb)->s_journal && - (S_ISLNK(inode->i_mode) || S_ISREG(inode->i_mode))) { - tid_t commit_tid = atomic_read(&ei->i_datasync_tid); - journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; - - log_start_commit(journal, commit_tid); - log_wait_commit(journal, commit_tid); - filemap_write_and_wait(&inode->i_data); - } - truncate_inode_pages(&inode->i_data, 0); - - ext3_discard_reservation(inode); - rsv = ei->i_block_alloc_info; - ei->i_block_alloc_info = NULL; - if (unlikely(rsv)) - kfree(rsv); - - if (!want_delete) - goto no_delete; - - handle = start_transaction(inode); - if (IS_ERR(handle)) { - /* - * If we're going to skip the normal cleanup, we still need to - * make sure that the in-core orphan linked list is properly - * cleaned up. - */ - ext3_orphan_del(NULL, inode); - goto no_delete; - } - - if (IS_SYNC(inode)) - handle->h_sync = 1; - inode->i_size = 0; - if (inode->i_blocks) - ext3_truncate(inode); - /* - * Kill off the orphan record created when the inode lost the last - * link. Note that ext3_orphan_del() has to be able to cope with the - * deletion of a non-existent orphan - ext3_truncate() could - * have removed the record. - */ - ext3_orphan_del(handle, inode); - ei->i_dtime = get_seconds(); - - /* - * One subtle ordering requirement: if anything has gone wrong - * (transaction abort, IO errors, whatever), then we can still - * do these next steps (the fs will already have been marked as - * having errors), but we can't free the inode if the mark_dirty - * fails. - */ - if (ext3_mark_inode_dirty(handle, inode)) { - /* If that failed, just dquot_drop() and be done with that */ - dquot_drop(inode); - end_writeback(inode); - } else { - ext3_xattr_delete_inode(handle, inode); - dquot_free_inode(inode); - dquot_drop(inode); - end_writeback(inode); - ext3_free_inode(handle, inode); - } - ext3_journal_stop(handle); - return; -no_delete: - end_writeback(inode); - dquot_drop(inode); -} - -typedef struct { - __le32 *p; - __le32 key; - struct buffer_head *bh; -} Indirect; - -static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) -{ - p->key = *(p->p = v); - p->bh = bh; -} - -static int verify_chain(Indirect *from, Indirect *to) -{ - while (from <= to && from->key == *from->p) - from++; - return (from > to); -} - -/** - * ext3_block_to_path - parse the block number into array of offsets - * @inode: inode in question (we are only interested in its superblock) - * @i_block: block number to be parsed - * @offsets: array to store the offsets in - * @boundary: set this non-zero if the referred-to block is likely to be - * followed (on disk) by an indirect block. - * - * To store the locations of file's data ext3 uses a data structure common - * for UNIX filesystems - tree of pointers anchored in the inode, with - * data blocks at leaves and indirect blocks in intermediate nodes. - * This function translates the block number into path in that tree - - * return value is the path length and @offsets[n] is the offset of - * pointer to (n+1)th node in the nth one. If @block is out of range - * (negative or too large) warning is printed and zero returned. - * - * Note: function doesn't find node addresses, so no IO is needed. All - * we need to know is the capacity of indirect blocks (taken from the - * inode->i_sb). - */ - -/* - * Portability note: the last comparison (check that we fit into triple - * indirect block) is spelled differently, because otherwise on an - * architecture with 32-bit longs and 8Kb pages we might get into trouble - * if our filesystem had 8Kb blocks. We might use long long, but that would - * kill us on x86. Oh, well, at least the sign propagation does not matter - - * i_block would have to be negative in the very beginning, so we would not - * get there at all. - */ - -static int ext3_block_to_path(struct inode *inode, - long i_block, int offsets[4], int *boundary) -{ - int ptrs = EXT3_ADDR_PER_BLOCK(inode->i_sb); - int ptrs_bits = EXT3_ADDR_PER_BLOCK_BITS(inode->i_sb); - const long direct_blocks = EXT3_NDIR_BLOCKS, - indirect_blocks = ptrs, - double_blocks = (1 << (ptrs_bits * 2)); - int n = 0; - int final = 0; - - if (i_block < 0) { - ext3_warning (inode->i_sb, "ext3_block_to_path", "block < 0"); - } else if (i_block < direct_blocks) { - offsets[n++] = i_block; - final = direct_blocks; - } else if ( (i_block -= direct_blocks) < indirect_blocks) { - offsets[n++] = EXT3_IND_BLOCK; - offsets[n++] = i_block; - final = ptrs; - } else if ((i_block -= indirect_blocks) < double_blocks) { - offsets[n++] = EXT3_DIND_BLOCK; - offsets[n++] = i_block >> ptrs_bits; - offsets[n++] = i_block & (ptrs - 1); - final = ptrs; - } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { - offsets[n++] = EXT3_TIND_BLOCK; - offsets[n++] = i_block >> (ptrs_bits * 2); - offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); - offsets[n++] = i_block & (ptrs - 1); - final = ptrs; - } else { - ext3_warning(inode->i_sb, "ext3_block_to_path", "block > big"); - } - if (boundary) - *boundary = final - 1 - (i_block & (ptrs - 1)); - return n; -} - -/** - * ext3_get_branch - read the chain of indirect blocks leading to data - * @inode: inode in question - * @depth: depth of the chain (1 - direct pointer, etc.) - * @offsets: offsets of pointers in inode/indirect blocks - * @chain: place to store the result - * @err: here we store the error value - * - * Function fills the array of triples <key, p, bh> and returns %NULL - * if everything went OK or the pointer to the last filled triple - * (incomplete one) otherwise. Upon the return chain[i].key contains - * the number of (i+1)-th block in the chain (as it is stored in memory, - * i.e. little-endian 32-bit), chain[i].p contains the address of that - * number (it points into struct inode for i==0 and into the bh->b_data - * for i>0) and chain[i].bh points to the buffer_head of i-th indirect - * block for i>0 and NULL for i==0. In other words, it holds the block - * numbers of the chain, addresses they were taken from (and where we can - * verify that chain did not change) and buffer_heads hosting these - * numbers. - * - * Function stops when it stumbles upon zero pointer (absent block) - * (pointer to last triple returned, *@err == 0) - * or when it gets an IO error reading an indirect block - * (ditto, *@err == -EIO) - * or when it notices that chain had been changed while it was reading - * (ditto, *@err == -EAGAIN) - * or when it reads all @depth-1 indirect blocks successfully and finds - * the whole chain, all way to the data (returns %NULL, *err == 0). - */ -static Indirect *ext3_get_branch(struct inode *inode, int depth, int *offsets, - Indirect chain[4], int *err) -{ - struct super_block *sb = inode->i_sb; - Indirect *p = chain; - struct buffer_head *bh; - - *err = 0; - /* i_data is not going away, no lock needed */ - add_chain (chain, NULL, EXT3_I(inode)->i_data + *offsets); - if (!p->key) - goto no_block; - while (--depth) { - bh = sb_bread(sb, le32_to_cpu(p->key)); - if (!bh) - goto failure; - /* Reader: pointers */ - if (!verify_chain(chain, p)) - goto changed; - add_chain(++p, bh, (__le32*)bh->b_data + *++offsets); - /* Reader: end */ - if (!p->key) - goto no_block; - } - return NULL; - -changed: - brelse(bh); - *err = -EAGAIN; - goto no_block; -failure: - *err = -EIO; -no_block: - return p; -} - -/** - * ext3_find_near - find a place for allocation with sufficient locality - * @inode: owner - * @ind: descriptor of indirect block. - * - * This function returns the preferred place for block allocation. - * It is used when heuristic for sequential allocation fails. - * Rules are: - * + if there is a block to the left of our position - allocate near it. - * + if pointer will live in indirect block - allocate near that block. - * + if pointer will live in inode - allocate in the same - * cylinder group. - * - * In the latter case we colour the starting block by the callers PID to - * prevent it from clashing with concurrent allocations for a different inode - * in the same block group. The PID is used here so that functionally related - * files will be close-by on-disk. - * - * Caller must make sure that @ind is valid and will stay that way. - */ -static ext3_fsblk_t ext3_find_near(struct inode *inode, Indirect *ind) -{ - struct ext3_inode_info *ei = EXT3_I(inode); - __le32 *start = ind->bh ? (__le32*) ind->bh->b_data : ei->i_data; - __le32 *p; - ext3_fsblk_t bg_start; - ext3_grpblk_t colour; - - /* Try to find previous block */ - for (p = ind->p - 1; p >= start; p--) { - if (*p) - return le32_to_cpu(*p); - } - - /* No such thing, so let's try location of indirect block */ - if (ind->bh) - return ind->bh->b_blocknr; - - /* - * It is going to be referred to from the inode itself? OK, just put it - * into the same cylinder group then. - */ - bg_start = ext3_group_first_block_no(inode->i_sb, ei->i_block_group); - colour = (current->pid % 16) * - (EXT3_BLOCKS_PER_GROUP(inode->i_sb) / 16); - return bg_start + colour; -} - -/** - * ext3_find_goal - find a preferred place for allocation. - * @inode: owner - * @block: block we want - * @partial: pointer to the last triple within a chain - * - * Normally this function find the preferred place for block allocation, - * returns it. - */ - -static ext3_fsblk_t ext3_find_goal(struct inode *inode, long block, - Indirect *partial) -{ - struct ext3_block_alloc_info *block_i; - - block_i = EXT3_I(inode)->i_block_alloc_info; - - /* - * try the heuristic for sequential allocation, - * failing that at least try to get decent locality. - */ - if (block_i && (block == block_i->last_alloc_logical_block + 1) - && (block_i->last_alloc_physical_block != 0)) { - return block_i->last_alloc_physical_block + 1; - } - - return ext3_find_near(inode, partial); -} - -/** - * ext3_blks_to_allocate - Look up the block map and count the number - * of direct blocks need to be allocated for the given branch. - * - * @branch: chain of indirect blocks - * @k: number of blocks need for indirect blocks - * @blks: number of data blocks to be mapped. - * @blocks_to_boundary: the offset in the indirect block - * - * return the total number of blocks to be allocate, including the - * direct and indirect blocks. - */ -static int ext3_blks_to_allocate(Indirect *branch, int k, unsigned long blks, - int blocks_to_boundary) -{ - unsigned long count = 0; - - /* - * Simple case, [t,d]Indirect block(s) has not allocated yet - * then it's clear blocks on that path have not allocated - */ - if (k > 0) { - /* right now we don't handle cross boundary allocation */ - if (blks < blocks_to_boundary + 1) - count += blks; - else - count += blocks_to_boundary + 1; - return count; - } - - count++; - while (count < blks && count <= blocks_to_boundary && - le32_to_cpu(*(branch[0].p + count)) == 0) { - count++; - } - return count; -} - -/** - * ext3_alloc_blocks - multiple allocate blocks needed for a branch - * @handle: handle for this transaction - * @inode: owner - * @goal: preferred place for allocation - * @indirect_blks: the number of blocks need to allocate for indirect - * blocks - * @blks: number of blocks need to allocated for direct blocks - * @new_blocks: on return it will store the new block numbers for - * the indirect blocks(if needed) and the first direct block, - * @err: here we store the error value - * - * return the number of direct blocks allocated - */ -static int ext3_alloc_blocks(handle_t *handle, struct inode *inode, - ext3_fsblk_t goal, int indirect_blks, int blks, - ext3_fsblk_t new_blocks[4], int *err) -{ - int target, i; - unsigned long count = 0; - int index = 0; - ext3_fsblk_t current_block = 0; - int ret = 0; - - /* - * Here we try to allocate the requested multiple blocks at once, - * on a best-effort basis. - * To build a branch, we should allocate blocks for - * the indirect blocks(if not allocated yet), and at least - * the first direct block of this branch. That's the - * minimum number of blocks need to allocate(required) - */ - target = blks + indirect_blks; - - while (1) { - count = target; - /* allocating blocks for indirect blocks and direct blocks */ - current_block = ext3_new_blocks(handle,inode,goal,&count,err); - if (*err) - goto failed_out; - - target -= count; - /* allocate blocks for indirect blocks */ - while (index < indirect_blks && count) { - new_blocks[index++] = current_block++; - count--; - } - - if (count > 0) - break; - } - - /* save the new block number for the first direct block */ - new_blocks[index] = current_block; - - /* total number of blocks allocated for direct blocks */ - ret = count; - *err = 0; - return ret; -failed_out: - for (i = 0; i <index; i++) - ext3_free_blocks(handle, inode, new_blocks[i], 1); - return ret; -} - -/** - * ext3_alloc_branch - allocate and set up a chain of blocks. - * @handle: handle for this transaction - * @inode: owner - * @indirect_blks: number of allocated indirect blocks - * @blks: number of allocated direct blocks - * @goal: preferred place for allocation - * @offsets: offsets (in the blocks) to store the pointers to next. - * @branch: place to store the chain in. - * - * This function allocates blocks, zeroes out all but the last one, - * links them into chain and (if we are synchronous) writes them to disk. - * In other words, it prepares a branch that can be spliced onto the - * inode. It stores the information about that chain in the branch[], in - * the same format as ext3_get_branch() would do. We are calling it after - * we had read the existing part of chain and partial points to the last - * triple of that (one with zero ->key). Upon the exit we have the same - * picture as after the successful ext3_get_block(), except that in one - * place chain is disconnected - *branch->p is still zero (we did not - * set the last link), but branch->key contains the number that should - * be placed into *branch->p to fill that gap. - * - * If allocation fails we free all blocks we've allocated (and forget - * their buffer_heads) and return the error value the from failed - * ext3_alloc_block() (normally -ENOSPC). Otherwise we set the chain - * as described above and return 0. - */ -static int ext3_alloc_branch(handle_t *handle, struct inode *inode, - int indirect_blks, int *blks, ext3_fsblk_t goal, - int *offsets, Indirect *branch) -{ - int blocksize = inode->i_sb->s_blocksize; - int i, n = 0; - int err = 0; - struct buffer_head *bh; - int num; - ext3_fsblk_t new_blocks[4]; - ext3_fsblk_t current_block; - - num = ext3_alloc_blocks(handle, inode, goal, indirect_blks, - *blks, new_blocks, &err); - if (err) - return err; - - branch[0].key = cpu_to_le32(new_blocks[0]); - /* - * metadata blocks and data blocks are allocated. - */ - for (n = 1; n <= indirect_blks; n++) { - /* - * Get buffer_head for parent block, zero it out - * and set the pointer to new one, then send - * parent to disk. - */ - bh = sb_getblk(inode->i_sb, new_blocks[n-1]); - branch[n].bh = bh; - lock_buffer(bh); - BUFFER_TRACE(bh, "call get_create_access"); - err = ext3_journal_get_create_access(handle, bh); - if (err) { - unlock_buffer(bh); - brelse(bh); - goto failed; - } - - memset(bh->b_data, 0, blocksize); - branch[n].p = (__le32 *) bh->b_data + offsets[n]; - branch[n].key = cpu_to_le32(new_blocks[n]); - *branch[n].p = branch[n].key; - if ( n == indirect_blks) { - current_block = new_blocks[n]; - /* - * End of chain, update the last new metablock of - * the chain to point to the new allocated - * data blocks numbers - */ - for (i=1; i < num; i++) - *(branch[n].p + i) = cpu_to_le32(++current_block); - } - BUFFER_TRACE(bh, "marking uptodate"); - set_buffer_uptodate(bh); - unlock_buffer(bh); - - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) - goto failed; - } - *blks = num; - return err; -failed: - /* Allocation failed, free what we already allocated */ - for (i = 1; i <= n ; i++) { - BUFFER_TRACE(branch[i].bh, "call journal_forget"); - ext3_journal_forget(handle, branch[i].bh); - } - for (i = 0; i <indirect_blks; i++) - ext3_free_blocks(handle, inode, new_blocks[i], 1); - - ext3_free_blocks(handle, inode, new_blocks[i], num); - - return err; -} - -/** - * ext3_splice_branch - splice the allocated branch onto inode. - * @handle: handle for this transaction - * @inode: owner - * @block: (logical) number of block we are adding - * @where: location of missing link - * @num: number of indirect blocks we are adding - * @blks: number of direct blocks we are adding - * - * This function fills the missing link and does all housekeeping needed in - * inode (->i_blocks, etc.). In case of success we end up with the full - * chain to new block and return 0. - */ -static int ext3_splice_branch(handle_t *handle, struct inode *inode, - long block, Indirect *where, int num, int blks) -{ - int i; - int err = 0; - struct ext3_block_alloc_info *block_i; - ext3_fsblk_t current_block; - struct ext3_inode_info *ei = EXT3_I(inode); - struct timespec now; - - block_i = ei->i_block_alloc_info; - /* - * If we're splicing into a [td]indirect block (as opposed to the - * inode) then we need to get write access to the [td]indirect block - * before the splice. - */ - if (where->bh) { - BUFFER_TRACE(where->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, where->bh); - if (err) - goto err_out; - } - /* That's it */ - - *where->p = where->key; - - /* - * Update the host buffer_head or inode to point to more just allocated - * direct blocks blocks - */ - if (num == 0 && blks > 1) { - current_block = le32_to_cpu(where->key) + 1; - for (i = 1; i < blks; i++) - *(where->p + i ) = cpu_to_le32(current_block++); - } - - /* - * update the most recently allocated logical & physical block - * in i_block_alloc_info, to assist find the proper goal block for next - * allocation - */ - if (block_i) { - block_i->last_alloc_logical_block = block + blks - 1; - block_i->last_alloc_physical_block = - le32_to_cpu(where[num].key) + blks - 1; - } - - /* We are done with atomic stuff, now do the rest of housekeeping */ - now = CURRENT_TIME_SEC; - if (!timespec_equal(&inode->i_ctime, &now) || !where->bh) { - inode->i_ctime = now; - ext3_mark_inode_dirty(handle, inode); - } - /* ext3_mark_inode_dirty already updated i_sync_tid */ - atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); - - /* had we spliced it onto indirect block? */ - if (where->bh) { - /* - * If we spliced it onto an indirect block, we haven't - * altered the inode. Note however that if it is being spliced - * onto an indirect block at the very end of the file (the - * file is growing) then we *will* alter the inode to reflect - * the new i_size. But that is not done here - it is done in - * generic_commit_write->__mark_inode_dirty->ext3_dirty_inode. - */ - jbd_debug(5, "splicing indirect only\n"); - BUFFER_TRACE(where->bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, where->bh); - if (err) - goto err_out; - } else { - /* - * OK, we spliced it into the inode itself on a direct block. - * Inode was dirtied above. - */ - jbd_debug(5, "splicing direct\n"); - } - return err; - -err_out: - for (i = 1; i <= num; i++) { - BUFFER_TRACE(where[i].bh, "call journal_forget"); - ext3_journal_forget(handle, where[i].bh); - ext3_free_blocks(handle,inode,le32_to_cpu(where[i-1].key),1); - } - ext3_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks); - - return err; -} - -/* - * Allocation strategy is simple: if we have to allocate something, we will - * have to go the whole way to leaf. So let's do it before attaching anything - * to tree, set linkage between the newborn blocks, write them if sync is - * required, recheck the path, free and repeat if check fails, otherwise - * set the last missing link (that will protect us from any truncate-generated - * removals - all blocks on the path are immune now) and possibly force the - * write on the parent block. - * That has a nice additional property: no special recovery from the failed - * allocations is needed - we simply release blocks and do not touch anything - * reachable from inode. - * - * `handle' can be NULL if create == 0. - * - * The BKL may not be held on entry here. Be sure to take it early. - * return > 0, # of blocks mapped or allocated. - * return = 0, if plain lookup failed. - * return < 0, error case. - */ -int ext3_get_blocks_handle(handle_t *handle, struct inode *inode, - sector_t iblock, unsigned long maxblocks, - struct buffer_head *bh_result, - int create) -{ - int err = -EIO; - int offsets[4]; - Indirect chain[4]; - Indirect *partial; - ext3_fsblk_t goal; - int indirect_blks; - int blocks_to_boundary = 0; - int depth; - struct ext3_inode_info *ei = EXT3_I(inode); - int count = 0; - ext3_fsblk_t first_block = 0; - - - trace_ext3_get_blocks_enter(inode, iblock, maxblocks, create); - J_ASSERT(handle != NULL || create == 0); - depth = ext3_block_to_path(inode,iblock,offsets,&blocks_to_boundary); - - if (depth == 0) - goto out; - - partial = ext3_get_branch(inode, depth, offsets, chain, &err); - - /* Simplest case - block found, no allocation needed */ - if (!partial) { - first_block = le32_to_cpu(chain[depth - 1].key); - clear_buffer_new(bh_result); - count++; - /*map more blocks*/ - while (count < maxblocks && count <= blocks_to_boundary) { - ext3_fsblk_t blk; - - if (!verify_chain(chain, chain + depth - 1)) { - /* - * Indirect block might be removed by - * truncate while we were reading it. - * Handling of that case: forget what we've - * got now. Flag the err as EAGAIN, so it - * will reread. - */ - err = -EAGAIN; - count = 0; - break; - } - blk = le32_to_cpu(*(chain[depth-1].p + count)); - - if (blk == first_block + count) - count++; - else - break; - } - if (err != -EAGAIN) - goto got_it; - } - - /* Next simple case - plain lookup or failed read of indirect block */ - if (!create || err == -EIO) - goto cleanup; - - /* - * Block out ext3_truncate while we alter the tree - */ - mutex_lock(&ei->truncate_mutex); - - /* - * If the indirect block is missing while we are reading - * the chain(ext3_get_branch() returns -EAGAIN err), or - * if the chain has been changed after we grab the semaphore, - * (either because another process truncated this branch, or - * another get_block allocated this branch) re-grab the chain to see if - * the request block has been allocated or not. - * - * Since we already block the truncate/other get_block - * at this point, we will have the current copy of the chain when we - * splice the branch into the tree. - */ - if (err == -EAGAIN || !verify_chain(chain, partial)) { - while (partial > chain) { - brelse(partial->bh); - partial--; - } - partial = ext3_get_branch(inode, depth, offsets, chain, &err); - if (!partial) { - count++; - mutex_unlock(&ei->truncate_mutex); - if (err) - goto cleanup; - clear_buffer_new(bh_result); - goto got_it; - } - } - - /* - * Okay, we need to do block allocation. Lazily initialize the block - * allocation info here if necessary - */ - if (S_ISREG(inode->i_mode) && (!ei->i_block_alloc_info)) - ext3_init_block_alloc_info(inode); - - goal = ext3_find_goal(inode, iblock, partial); - - /* the number of blocks need to allocate for [d,t]indirect blocks */ - indirect_blks = (chain + depth) - partial - 1; - - /* - * Next look up the indirect map to count the totoal number of - * direct blocks to allocate for this branch. - */ - count = ext3_blks_to_allocate(partial, indirect_blks, - maxblocks, blocks_to_boundary); - err = ext3_alloc_branch(handle, inode, indirect_blks, &count, goal, - offsets + (partial - chain), partial); - - /* - * The ext3_splice_branch call will free and forget any buffers - * on the new chain if there is a failure, but that risks using - * up transaction credits, especially for bitmaps where the - * credits cannot be returned. Can we handle this somehow? We - * may need to return -EAGAIN upwards in the worst case. --sct - */ - if (!err) - err = ext3_splice_branch(handle, inode, iblock, - partial, indirect_blks, count); - mutex_unlock(&ei->truncate_mutex); - if (err) - goto cleanup; - - set_buffer_new(bh_result); -got_it: - map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key)); - if (count > blocks_to_boundary) - set_buffer_boundary(bh_result); - err = count; - /* Clean up and exit */ - partial = chain + depth - 1; /* the whole chain */ -cleanup: - while (partial > chain) { - BUFFER_TRACE(partial->bh, "call brelse"); - brelse(partial->bh); - partial--; - } - BUFFER_TRACE(bh_result, "returned"); -out: - trace_ext3_get_blocks_exit(inode, iblock, - depth ? le32_to_cpu(chain[depth-1].key) : 0, - count, err); - return err; -} - -/* Maximum number of blocks we map for direct IO at once. */ -#define DIO_MAX_BLOCKS 4096 -/* - * Number of credits we need for writing DIO_MAX_BLOCKS: - * We need sb + group descriptor + bitmap + inode -> 4 - * For B blocks with A block pointers per block we need: - * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect). - * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25. - */ -#define DIO_CREDITS 25 - -static int ext3_get_block(struct inode *inode, sector_t iblock, - struct buffer_head *bh_result, int create) -{ - handle_t *handle = ext3_journal_current_handle(); - int ret = 0, started = 0; - unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; - - if (create && !handle) { /* Direct IO write... */ - if (max_blocks > DIO_MAX_BLOCKS) - max_blocks = DIO_MAX_BLOCKS; - handle = ext3_journal_start(inode, DIO_CREDITS + - EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out; - } - started = 1; - } - - ret = ext3_get_blocks_handle(handle, inode, iblock, - max_blocks, bh_result, create); - if (ret > 0) { - bh_result->b_size = (ret << inode->i_blkbits); - ret = 0; - } - if (started) - ext3_journal_stop(handle); -out: - return ret; -} - -int ext3_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, - u64 start, u64 len) -{ - return generic_block_fiemap(inode, fieinfo, start, len, - ext3_get_block); -} - -/* - * `handle' can be NULL if create is zero - */ -struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode, - long block, int create, int *errp) -{ - struct buffer_head dummy; - int fatal = 0, err; - - J_ASSERT(handle != NULL || create == 0); - - dummy.b_state = 0; - dummy.b_blocknr = -1000; - buffer_trace_init(&dummy.b_history); - err = ext3_get_blocks_handle(handle, inode, block, 1, - &dummy, create); - /* - * ext3_get_blocks_handle() returns number of blocks - * mapped. 0 in case of a HOLE. - */ - if (err > 0) { - if (err > 1) - WARN_ON(1); - err = 0; - } - *errp = err; - if (!err && buffer_mapped(&dummy)) { - struct buffer_head *bh; - bh = sb_getblk(inode->i_sb, dummy.b_blocknr); - if (!bh) { - *errp = -EIO; - goto err; - } - if (buffer_new(&dummy)) { - J_ASSERT(create != 0); - J_ASSERT(handle != NULL); - - /* - * Now that we do not always journal data, we should - * keep in mind whether this should always journal the - * new buffer as metadata. For now, regular file - * writes use ext3_get_block instead, so it's not a - * problem. - */ - lock_buffer(bh); - BUFFER_TRACE(bh, "call get_create_access"); - fatal = ext3_journal_get_create_access(handle, bh); - if (!fatal && !buffer_uptodate(bh)) { - memset(bh->b_data,0,inode->i_sb->s_blocksize); - set_buffer_uptodate(bh); - } - unlock_buffer(bh); - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (!fatal) - fatal = err; - } else { - BUFFER_TRACE(bh, "not a new buffer"); - } - if (fatal) { - *errp = fatal; - brelse(bh); - bh = NULL; - } - return bh; - } -err: - return NULL; -} - -struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, - int block, int create, int *err) -{ - struct buffer_head * bh; - - bh = ext3_getblk(handle, inode, block, create, err); - if (!bh) - return bh; - if (bh_uptodate_or_lock(bh)) - return bh; - get_bh(bh); - bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META | REQ_PRIO, bh); - wait_on_buffer(bh); - if (buffer_uptodate(bh)) - return bh; - put_bh(bh); - *err = -EIO; - return NULL; -} - -static int walk_page_buffers( handle_t *handle, - struct buffer_head *head, - unsigned from, - unsigned to, - int *partial, - int (*fn)( handle_t *handle, - struct buffer_head *bh)) -{ - struct buffer_head *bh; - unsigned block_start, block_end; - unsigned blocksize = head->b_size; - int err, ret = 0; - struct buffer_head *next; - - for ( bh = head, block_start = 0; - ret == 0 && (bh != head || !block_start); - block_start = block_end, bh = next) - { - next = bh->b_this_page; - block_end = block_start + blocksize; - if (block_end <= from || block_start >= to) { - if (partial && !buffer_uptodate(bh)) - *partial = 1; - continue; - } - err = (*fn)(handle, bh); - if (!ret) - ret = err; - } - return ret; -} - -/* - * To preserve ordering, it is essential that the hole instantiation and - * the data write be encapsulated in a single transaction. We cannot - * close off a transaction and start a new one between the ext3_get_block() - * and the commit_write(). So doing the journal_start at the start of - * prepare_write() is the right place. - * - * Also, this function can nest inside ext3_writepage() -> - * block_write_full_page(). In that case, we *know* that ext3_writepage() - * has generated enough buffer credits to do the whole page. So we won't - * block on the journal in that case, which is good, because the caller may - * be PF_MEMALLOC. - * - * By accident, ext3 can be reentered when a transaction is open via - * quota file writes. If we were to commit the transaction while thus - * reentered, there can be a deadlock - we would be holding a quota - * lock, and the commit would never complete if another thread had a - * transaction open and was blocking on the quota lock - a ranking - * violation. - * - * So what we do is to rely on the fact that journal_stop/journal_start - * will _not_ run commit under these circumstances because handle->h_ref - * is elevated. We'll still have enough credits for the tiny quotafile - * write. - */ -static int do_journal_get_write_access(handle_t *handle, - struct buffer_head *bh) -{ - int dirty = buffer_dirty(bh); - int ret; - - if (!buffer_mapped(bh) || buffer_freed(bh)) - return 0; - /* - * __block_prepare_write() could have dirtied some buffers. Clean - * the dirty bit as jbd2_journal_get_write_access() could complain - * otherwise about fs integrity issues. Setting of the dirty bit - * by __block_prepare_write() isn't a real problem here as we clear - * the bit before releasing a page lock and thus writeback cannot - * ever write the buffer. - */ - if (dirty) - clear_buffer_dirty(bh); - ret = ext3_journal_get_write_access(handle, bh); - if (!ret && dirty) - ret = ext3_journal_dirty_metadata(handle, bh); - return ret; -} - -/* - * Truncate blocks that were not used by write. We have to truncate the - * pagecache as well so that corresponding buffers get properly unmapped. - */ -static void ext3_truncate_failed_write(struct inode *inode) -{ - truncate_inode_pages(inode->i_mapping, inode->i_size); - ext3_truncate(inode); -} - -/* - * Truncate blocks that were not used by direct IO write. We have to zero out - * the last file block as well because direct IO might have written to it. - */ -static void ext3_truncate_failed_direct_write(struct inode *inode) -{ - ext3_block_truncate_page(inode, inode->i_size); - ext3_truncate(inode); -} - -static int ext3_write_begin(struct file *file, struct address_space *mapping, - loff_t pos, unsigned len, unsigned flags, - struct page **pagep, void **fsdata) -{ - struct inode *inode = mapping->host; - int ret; - handle_t *handle; - int retries = 0; - struct page *page; - pgoff_t index; - unsigned from, to; - /* Reserve one block more for addition to orphan list in case - * we allocate blocks but write fails for some reason */ - int needed_blocks = ext3_writepage_trans_blocks(inode) + 1; - - trace_ext3_write_begin(inode, pos, len, flags); - - index = pos >> PAGE_CACHE_SHIFT; - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + len; - -retry: - page = grab_cache_page_write_begin(mapping, index, flags); - if (!page) - return -ENOMEM; - *pagep = page; - - handle = ext3_journal_start(inode, needed_blocks); - if (IS_ERR(handle)) { - unlock_page(page); - page_cache_release(page); - ret = PTR_ERR(handle); - goto out; - } - ret = __block_write_begin(page, pos, len, ext3_get_block); - if (ret) - goto write_begin_failed; - - if (ext3_should_journal_data(inode)) { - ret = walk_page_buffers(handle, page_buffers(page), - from, to, NULL, do_journal_get_write_access); - } -write_begin_failed: - if (ret) { - /* - * block_write_begin may have instantiated a few blocks - * outside i_size. Trim these off again. Don't need - * i_size_read because we hold i_mutex. - * - * Add inode to orphan list in case we crash before truncate - * finishes. Do this only if ext3_can_truncate() agrees so - * that orphan processing code is happy. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ext3_journal_stop(handle); - unlock_page(page); - page_cache_release(page); - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - } - if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; -out: - return ret; -} - - -int ext3_journal_dirty_data(handle_t *handle, struct buffer_head *bh) -{ - int err = journal_dirty_data(handle, bh); - if (err) - ext3_journal_abort_handle(__func__, __func__, - bh, handle, err); - return err; -} - -/* For ordered writepage and write_end functions */ -static int journal_dirty_data_fn(handle_t *handle, struct buffer_head *bh) -{ - /* - * Write could have mapped the buffer but it didn't copy the data in - * yet. So avoid filing such buffer into a transaction. - */ - if (buffer_mapped(bh) && buffer_uptodate(bh)) - return ext3_journal_dirty_data(handle, bh); - return 0; -} - -/* For write_end() in data=journal mode */ -static int write_end_fn(handle_t *handle, struct buffer_head *bh) -{ - if (!buffer_mapped(bh) || buffer_freed(bh)) - return 0; - set_buffer_uptodate(bh); - return ext3_journal_dirty_metadata(handle, bh); -} - -/* - * This is nasty and subtle: ext3_write_begin() could have allocated blocks - * for the whole page but later we failed to copy the data in. Update inode - * size according to what we managed to copy. The rest is going to be - * truncated in write_end function. - */ -static void update_file_sizes(struct inode *inode, loff_t pos, unsigned copied) -{ - /* What matters to us is i_disksize. We don't write i_size anywhere */ - if (pos + copied > inode->i_size) - i_size_write(inode, pos + copied); - if (pos + copied > EXT3_I(inode)->i_disksize) { - EXT3_I(inode)->i_disksize = pos + copied; - mark_inode_dirty(inode); - } -} - -/* - * We need to pick up the new inode size which generic_commit_write gave us - * `file' can be NULL - eg, when called from page_symlink(). - * - * ext3 never places buffers on inode->i_mapping->private_list. metadata - * buffers are managed internally. - */ -static int ext3_ordered_write_end(struct file *file, - struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - handle_t *handle = ext3_journal_current_handle(); - struct inode *inode = file->f_mapping->host; - unsigned from, to; - int ret = 0, ret2; - - trace_ext3_ordered_write_end(inode, pos, len, copied); - copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); - - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + copied; - ret = walk_page_buffers(handle, page_buffers(page), - from, to, NULL, journal_dirty_data_fn); - - if (ret == 0) - update_file_sizes(inode, pos, copied); - /* - * There may be allocated blocks outside of i_size because - * we failed to copy some data. Prepare for truncate. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ret2 = ext3_journal_stop(handle); - if (!ret) - ret = ret2; - unlock_page(page); - page_cache_release(page); - - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - return ret ? ret : copied; -} - -static int ext3_writeback_write_end(struct file *file, - struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - handle_t *handle = ext3_journal_current_handle(); - struct inode *inode = file->f_mapping->host; - int ret; - - trace_ext3_writeback_write_end(inode, pos, len, copied); - copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); - update_file_sizes(inode, pos, copied); - /* - * There may be allocated blocks outside of i_size because - * we failed to copy some data. Prepare for truncate. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ret = ext3_journal_stop(handle); - unlock_page(page); - page_cache_release(page); - - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - return ret ? ret : copied; -} - -static int ext3_journalled_write_end(struct file *file, - struct address_space *mapping, - loff_t pos, unsigned len, unsigned copied, - struct page *page, void *fsdata) -{ - handle_t *handle = ext3_journal_current_handle(); - struct inode *inode = mapping->host; - struct ext3_inode_info *ei = EXT3_I(inode); - int ret = 0, ret2; - int partial = 0; - unsigned from, to; - - trace_ext3_journalled_write_end(inode, pos, len, copied); - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + len; - - if (copied < len) { - if (!PageUptodate(page)) - copied = 0; - page_zero_new_buffers(page, from + copied, to); - to = from + copied; - } - - ret = walk_page_buffers(handle, page_buffers(page), from, - to, &partial, write_end_fn); - if (!partial) - SetPageUptodate(page); - - if (pos + copied > inode->i_size) - i_size_write(inode, pos + copied); - /* - * There may be allocated blocks outside of i_size because - * we failed to copy some data. Prepare for truncate. - */ - if (pos + len > inode->i_size && ext3_can_truncate(inode)) - ext3_orphan_add(handle, inode); - ext3_set_inode_state(inode, EXT3_STATE_JDATA); - atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); - if (inode->i_size > ei->i_disksize) { - ei->i_disksize = inode->i_size; - ret2 = ext3_mark_inode_dirty(handle, inode); - if (!ret) - ret = ret2; - } - - ret2 = ext3_journal_stop(handle); - if (!ret) - ret = ret2; - unlock_page(page); - page_cache_release(page); - - if (pos + len > inode->i_size) - ext3_truncate_failed_write(inode); - return ret ? ret : copied; -} - -/* - * bmap() is special. It gets used by applications such as lilo and by - * the swapper to find the on-disk block of a specific piece of data. - * - * Naturally, this is dangerous if the block concerned is still in the - * journal. If somebody makes a swapfile on an ext3 data-journaling - * filesystem and enables swap, then they may get a nasty shock when the - * data getting swapped to that swapfile suddenly gets overwritten by - * the original zero's written out previously to the journal and - * awaiting writeback in the kernel's buffer cache. - * - * So, if we see any bmap calls here on a modified, data-journaled file, - * take extra steps to flush any blocks which might be in the cache. - */ -static sector_t ext3_bmap(struct address_space *mapping, sector_t block) -{ - struct inode *inode = mapping->host; - journal_t *journal; - int err; - - if (ext3_test_inode_state(inode, EXT3_STATE_JDATA)) { - /* - * This is a REALLY heavyweight approach, but the use of - * bmap on dirty files is expected to be extremely rare: - * only if we run lilo or swapon on a freshly made file - * do we expect this to happen. - * - * (bmap requires CAP_SYS_RAWIO so this does not - * represent an unprivileged user DOS attack --- we'd be - * in trouble if mortal users could trigger this path at - * will.) - * - * NB. EXT3_STATE_JDATA is not set on files other than - * regular files. If somebody wants to bmap a directory - * or symlink and gets confused because the buffer - * hasn't yet been flushed to disk, they deserve - * everything they get. - */ - - ext3_clear_inode_state(inode, EXT3_STATE_JDATA); - journal = EXT3_JOURNAL(inode); - journal_lock_updates(journal); - err = journal_flush(journal); - journal_unlock_updates(journal); - - if (err) - return 0; - } - - return generic_block_bmap(mapping,block,ext3_get_block); -} - -static int bget_one(handle_t *handle, struct buffer_head *bh) -{ - get_bh(bh); - return 0; -} - -static int bput_one(handle_t *handle, struct buffer_head *bh) -{ - put_bh(bh); - return 0; -} - -static int buffer_unmapped(handle_t *handle, struct buffer_head *bh) -{ - return !buffer_mapped(bh); -} - -/* - * Note that we always start a transaction even if we're not journalling - * data. This is to preserve ordering: any hole instantiation within - * __block_write_full_page -> ext3_get_block() should be journalled - * along with the data so we don't crash and then get metadata which - * refers to old data. - * - * In all journalling modes block_write_full_page() will start the I/O. - * - * Problem: - * - * ext3_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> - * ext3_writepage() - * - * Similar for: - * - * ext3_file_write() -> generic_file_write() -> __alloc_pages() -> ... - * - * Same applies to ext3_get_block(). We will deadlock on various things like - * lock_journal and i_truncate_mutex. - * - * Setting PF_MEMALLOC here doesn't work - too many internal memory - * allocations fail. - * - * 16May01: If we're reentered then journal_current_handle() will be - * non-zero. We simply *return*. - * - * 1 July 2001: @@@ FIXME: - * In journalled data mode, a data buffer may be metadata against the - * current transaction. But the same file is part of a shared mapping - * and someone does a writepage() on it. - * - * We will move the buffer onto the async_data list, but *after* it has - * been dirtied. So there's a small window where we have dirty data on - * BJ_Metadata. - * - * Note that this only applies to the last partial page in the file. The - * bit which block_write_full_page() uses prepare/commit for. (That's - * broken code anyway: it's wrong for msync()). - * - * It's a rare case: affects the final partial page, for journalled data - * where the file is subject to bith write() and writepage() in the same - * transction. To fix it we'll need a custom block_write_full_page(). - * We'll probably need that anyway for journalling writepage() output. - * - * We don't honour synchronous mounts for writepage(). That would be - * disastrous. Any write() or metadata operation will sync the fs for - * us. - * - * AKPM2: if all the page's buffers are mapped to disk and !data=journal, - * we don't need to open a transaction here. - */ -static int ext3_ordered_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - struct buffer_head *page_bufs; - handle_t *handle = NULL; - int ret = 0; - int err; - - J_ASSERT(PageLocked(page)); - /* - * We don't want to warn for emergency remount. The condition is - * ordered to avoid dereferencing inode->i_sb in non-error case to - * avoid slow-downs. - */ - WARN_ON_ONCE(IS_RDONLY(inode) && - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS)); - - /* - * We give up here if we're reentered, because it might be for a - * different filesystem. - */ - if (ext3_journal_current_handle()) - goto out_fail; - - trace_ext3_ordered_writepage(page); - if (!page_has_buffers(page)) { - create_empty_buffers(page, inode->i_sb->s_blocksize, - (1 << BH_Dirty)|(1 << BH_Uptodate)); - page_bufs = page_buffers(page); - } else { - page_bufs = page_buffers(page); - if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE, - NULL, buffer_unmapped)) { - /* Provide NULL get_block() to catch bugs if buffers - * weren't really mapped */ - return block_write_full_page(page, NULL, wbc); - } - } - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); - - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out_fail; - } - - walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, bget_one); - - ret = block_write_full_page(page, ext3_get_block, wbc); - - /* - * The page can become unlocked at any point now, and - * truncate can then come in and change things. So we - * can't touch *page from now on. But *page_bufs is - * safe due to elevated refcount. - */ - - /* - * And attach them to the current transaction. But only if - * block_write_full_page() succeeded. Otherwise they are unmapped, - * and generally junk. - */ - if (ret == 0) { - err = walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, - NULL, journal_dirty_data_fn); - if (!ret) - ret = err; - } - walk_page_buffers(handle, page_bufs, 0, - PAGE_CACHE_SIZE, NULL, bput_one); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; - -out_fail: - redirty_page_for_writepage(wbc, page); - unlock_page(page); - return ret; -} - -static int ext3_writeback_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - handle_t *handle = NULL; - int ret = 0; - int err; - - J_ASSERT(PageLocked(page)); - /* - * We don't want to warn for emergency remount. The condition is - * ordered to avoid dereferencing inode->i_sb in non-error case to - * avoid slow-downs. - */ - WARN_ON_ONCE(IS_RDONLY(inode) && - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS)); - - if (ext3_journal_current_handle()) - goto out_fail; - - trace_ext3_writeback_writepage(page); - if (page_has_buffers(page)) { - if (!walk_page_buffers(NULL, page_buffers(page), 0, - PAGE_CACHE_SIZE, NULL, buffer_unmapped)) { - /* Provide NULL get_block() to catch bugs if buffers - * weren't really mapped */ - return block_write_full_page(page, NULL, wbc); - } - } - - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out_fail; - } - - ret = block_write_full_page(page, ext3_get_block, wbc); - - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; - -out_fail: - redirty_page_for_writepage(wbc, page); - unlock_page(page); - return ret; -} - -static int ext3_journalled_writepage(struct page *page, - struct writeback_control *wbc) -{ - struct inode *inode = page->mapping->host; - handle_t *handle = NULL; - int ret = 0; - int err; - - J_ASSERT(PageLocked(page)); - /* - * We don't want to warn for emergency remount. The condition is - * ordered to avoid dereferencing inode->i_sb in non-error case to - * avoid slow-downs. - */ - WARN_ON_ONCE(IS_RDONLY(inode) && - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS)); - - if (ext3_journal_current_handle()) - goto no_write; - - trace_ext3_journalled_writepage(page); - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto no_write; - } - - if (!page_has_buffers(page) || PageChecked(page)) { - /* - * It's mmapped pagecache. Add buffers and journal it. There - * doesn't seem much point in redirtying the page here. - */ - ClearPageChecked(page); - ret = __block_write_begin(page, 0, PAGE_CACHE_SIZE, - ext3_get_block); - if (ret != 0) { - ext3_journal_stop(handle); - goto out_unlock; - } - ret = walk_page_buffers(handle, page_buffers(page), 0, - PAGE_CACHE_SIZE, NULL, do_journal_get_write_access); - - err = walk_page_buffers(handle, page_buffers(page), 0, - PAGE_CACHE_SIZE, NULL, write_end_fn); - if (ret == 0) - ret = err; - ext3_set_inode_state(inode, EXT3_STATE_JDATA); - atomic_set(&EXT3_I(inode)->i_datasync_tid, - handle->h_transaction->t_tid); - unlock_page(page); - } else { - /* - * It may be a page full of checkpoint-mode buffers. We don't - * really know unless we go poke around in the buffer_heads. - * But block_write_full_page will do the right thing. - */ - ret = block_write_full_page(page, ext3_get_block, wbc); - } - err = ext3_journal_stop(handle); - if (!ret) - ret = err; -out: - return ret; - -no_write: - redirty_page_for_writepage(wbc, page); -out_unlock: - unlock_page(page); - goto out; -} - -static int ext3_readpage(struct file *file, struct page *page) -{ - trace_ext3_readpage(page); - return mpage_readpage(page, ext3_get_block); -} - -static int -ext3_readpages(struct file *file, struct address_space *mapping, - struct list_head *pages, unsigned nr_pages) -{ - return mpage_readpages(mapping, pages, nr_pages, ext3_get_block); -} - -static void ext3_invalidatepage(struct page *page, unsigned long offset) -{ - journal_t *journal = EXT3_JOURNAL(page->mapping->host); - - trace_ext3_invalidatepage(page, offset); - - /* - * If it's a full truncate we just forget about the pending dirtying - */ - if (offset == 0) - ClearPageChecked(page); - - journal_invalidatepage(journal, page, offset); -} - -static int ext3_releasepage(struct page *page, gfp_t wait) -{ - journal_t *journal = EXT3_JOURNAL(page->mapping->host); - - trace_ext3_releasepage(page); - WARN_ON(PageChecked(page)); - if (!page_has_buffers(page)) - return 0; - return journal_try_to_free_buffers(journal, page, wait); -} - -/* - * If the O_DIRECT write will extend the file then add this inode to the - * orphan list. So recovery will truncate it back to the original size - * if the machine crashes during the write. - * - * If the O_DIRECT write is intantiating holes inside i_size and the machine - * crashes then stale disk data _may_ be exposed inside the file. But current - * VFS code falls back into buffered path in that case so we are safe. - */ -static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, - const struct iovec *iov, loff_t offset, - unsigned long nr_segs) -{ - struct file *file = iocb->ki_filp; - struct inode *inode = file->f_mapping->host; - struct ext3_inode_info *ei = EXT3_I(inode); - handle_t *handle; - ssize_t ret; - int orphan = 0; - size_t count = iov_length(iov, nr_segs); - int retries = 0; - - trace_ext3_direct_IO_enter(inode, offset, iov_length(iov, nr_segs), rw); - - if (rw == WRITE) { - loff_t final_size = offset + count; - - if (final_size > inode->i_size) { - /* Credits for sb + inode write */ - handle = ext3_journal_start(inode, 2); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - goto out; - } - ret = ext3_orphan_add(handle, inode); - if (ret) { - ext3_journal_stop(handle); - goto out; - } - orphan = 1; - ei->i_disksize = inode->i_size; - ext3_journal_stop(handle); - } - } - -retry: - ret = blockdev_direct_IO(rw, iocb, inode, iov, offset, nr_segs, - ext3_get_block); - /* - * In case of error extending write may have instantiated a few - * blocks outside i_size. Trim these off again. - */ - if (unlikely((rw & WRITE) && ret < 0)) { - loff_t isize = i_size_read(inode); - loff_t end = offset + iov_length(iov, nr_segs); - - if (end > isize) - ext3_truncate_failed_direct_write(inode); - } - if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - - if (orphan) { - int err; - - /* Credits for sb + inode write */ - handle = ext3_journal_start(inode, 2); - if (IS_ERR(handle)) { - /* This is really bad luck. We've written the data - * but cannot extend i_size. Truncate allocated blocks - * and pretend the write failed... */ - ext3_truncate_failed_direct_write(inode); - ret = PTR_ERR(handle); - goto out; - } - if (inode->i_nlink) - ext3_orphan_del(handle, inode); - if (ret > 0) { - loff_t end = offset + ret; - if (end > inode->i_size) { - ei->i_disksize = end; - i_size_write(inode, end); - /* - * We're going to return a positive `ret' - * here due to non-zero-length I/O, so there's - * no way of reporting error returns from - * ext3_mark_inode_dirty() to userspace. So - * ignore it. - */ - ext3_mark_inode_dirty(handle, inode); - } - } - err = ext3_journal_stop(handle); - if (ret == 0) - ret = err; - } -out: - trace_ext3_direct_IO_exit(inode, offset, - iov_length(iov, nr_segs), rw, ret); - return ret; -} - -/* - * Pages can be marked dirty completely asynchronously from ext3's journalling - * activity. By filemap_sync_pte(), try_to_unmap_one(), etc. We cannot do - * much here because ->set_page_dirty is called under VFS locks. The page is - * not necessarily locked. - * - * We cannot just dirty the page and leave attached buffers clean, because the - * buffers' dirty state is "definitive". We cannot just set the buffers dirty - * or jbddirty because all the journalling code will explode. - * - * So what we do is to mark the page "pending dirty" and next time writepage - * is called, propagate that into the buffers appropriately. - */ -static int ext3_journalled_set_page_dirty(struct page *page) -{ - SetPageChecked(page); - return __set_page_dirty_nobuffers(page); -} - -static const struct address_space_operations ext3_ordered_aops = { - .readpage = ext3_readpage, - .readpages = ext3_readpages, - .writepage = ext3_ordered_writepage, - .write_begin = ext3_write_begin, - .write_end = ext3_ordered_write_end, - .bmap = ext3_bmap, - .invalidatepage = ext3_invalidatepage, - .releasepage = ext3_releasepage, - .direct_IO = ext3_direct_IO, - .migratepage = buffer_migrate_page, - .is_partially_uptodate = block_is_partially_uptodate, - .error_remove_page = generic_error_remove_page, -}; - -static const struct address_space_operations ext3_writeback_aops = { - .readpage = ext3_readpage, - .readpages = ext3_readpages, - .writepage = ext3_writeback_writepage, - .write_begin = ext3_write_begin, - .write_end = ext3_writeback_write_end, - .bmap = ext3_bmap, - .invalidatepage = ext3_invalidatepage, - .releasepage = ext3_releasepage, - .direct_IO = ext3_direct_IO, - .migratepage = buffer_migrate_page, - .is_partially_uptodate = block_is_partially_uptodate, - .error_remove_page = generic_error_remove_page, -}; - -static const struct address_space_operations ext3_journalled_aops = { - .readpage = ext3_readpage, - .readpages = ext3_readpages, - .writepage = ext3_journalled_writepage, - .write_begin = ext3_write_begin, - .write_end = ext3_journalled_write_end, - .set_page_dirty = ext3_journalled_set_page_dirty, - .bmap = ext3_bmap, - .invalidatepage = ext3_invalidatepage, - .releasepage = ext3_releasepage, - .is_partially_uptodate = block_is_partially_uptodate, - .error_remove_page = generic_error_remove_page, -}; - -void ext3_set_aops(struct inode *inode) -{ - if (ext3_should_order_data(inode)) - inode->i_mapping->a_ops = &ext3_ordered_aops; - else if (ext3_should_writeback_data(inode)) - inode->i_mapping->a_ops = &ext3_writeback_aops; - else - inode->i_mapping->a_ops = &ext3_journalled_aops; -} - -/* - * ext3_block_truncate_page() zeroes out a mapping from file offset `from' - * up to the end of the block which corresponds to `from'. - * This required during truncate. We need to physically zero the tail end - * of that block so it doesn't yield old data if the file is later grown. - */ -static int ext3_block_truncate_page(struct inode *inode, loff_t from) -{ - ext3_fsblk_t index = from >> PAGE_CACHE_SHIFT; - unsigned offset = from & (PAGE_CACHE_SIZE - 1); - unsigned blocksize, iblock, length, pos; - struct page *page; - handle_t *handle = NULL; - struct buffer_head *bh; - int err = 0; - - /* Truncated on block boundary - nothing to do */ - blocksize = inode->i_sb->s_blocksize; - if ((from & (blocksize - 1)) == 0) - return 0; - - page = grab_cache_page(inode->i_mapping, index); - if (!page) - return -ENOMEM; - length = blocksize - (offset & (blocksize - 1)); - iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); - - if (!page_has_buffers(page)) - create_empty_buffers(page, blocksize, 0); - - /* Find the buffer that contains "offset" */ - bh = page_buffers(page); - pos = blocksize; - while (offset >= pos) { - bh = bh->b_this_page; - iblock++; - pos += blocksize; - } - - err = 0; - if (buffer_freed(bh)) { - BUFFER_TRACE(bh, "freed: skip"); - goto unlock; - } - - if (!buffer_mapped(bh)) { - BUFFER_TRACE(bh, "unmapped"); - ext3_get_block(inode, iblock, bh, 0); - /* unmapped? It's a hole - nothing to do */ - if (!buffer_mapped(bh)) { - BUFFER_TRACE(bh, "still unmapped"); - goto unlock; - } - } - - /* Ok, it's mapped. Make sure it's up-to-date */ - if (PageUptodate(page)) - set_buffer_uptodate(bh); - - if (!bh_uptodate_or_lock(bh)) { - err = bh_submit_read(bh); - /* Uhhuh. Read error. Complain and punt. */ - if (err) - goto unlock; - } - - /* data=writeback mode doesn't need transaction to zero-out data */ - if (!ext3_should_writeback_data(inode)) { - /* We journal at most one block */ - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) { - clear_highpage(page); - flush_dcache_page(page); - err = PTR_ERR(handle); - goto unlock; - } - } - - if (ext3_should_journal_data(inode)) { - BUFFER_TRACE(bh, "get write access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) - goto stop; - } - - zero_user(page, offset, length); - BUFFER_TRACE(bh, "zeroed end of block"); - - err = 0; - if (ext3_should_journal_data(inode)) { - err = ext3_journal_dirty_metadata(handle, bh); - } else { - if (ext3_should_order_data(inode)) - err = ext3_journal_dirty_data(handle, bh); - mark_buffer_dirty(bh); - } -stop: - if (handle) - ext3_journal_stop(handle); - -unlock: - unlock_page(page); - page_cache_release(page); - return err; -} - -/* - * Probably it should be a library function... search for first non-zero word - * or memcmp with zero_page, whatever is better for particular architecture. - * Linus? - */ -static inline int all_zeroes(__le32 *p, __le32 *q) -{ - while (p < q) - if (*p++) - return 0; - return 1; -} - -/** - * ext3_find_shared - find the indirect blocks for partial truncation. - * @inode: inode in question - * @depth: depth of the affected branch - * @offsets: offsets of pointers in that branch (see ext3_block_to_path) - * @chain: place to store the pointers to partial indirect blocks - * @top: place to the (detached) top of branch - * - * This is a helper function used by ext3_truncate(). - * - * When we do truncate() we may have to clean the ends of several - * indirect blocks but leave the blocks themselves alive. Block is - * partially truncated if some data below the new i_size is referred - * from it (and it is on the path to the first completely truncated - * data block, indeed). We have to free the top of that path along - * with everything to the right of the path. Since no allocation - * past the truncation point is possible until ext3_truncate() - * finishes, we may safely do the latter, but top of branch may - * require special attention - pageout below the truncation point - * might try to populate it. - * - * We atomically detach the top of branch from the tree, store the - * block number of its root in *@top, pointers to buffer_heads of - * partially truncated blocks - in @chain[].bh and pointers to - * their last elements that should not be removed - in - * @chain[].p. Return value is the pointer to last filled element - * of @chain. - * - * The work left to caller to do the actual freeing of subtrees: - * a) free the subtree starting from *@top - * b) free the subtrees whose roots are stored in - * (@chain[i].p+1 .. end of @chain[i].bh->b_data) - * c) free the subtrees growing from the inode past the @chain[0]. - * (no partially truncated stuff there). */ - -static Indirect *ext3_find_shared(struct inode *inode, int depth, - int offsets[4], Indirect chain[4], __le32 *top) -{ - Indirect *partial, *p; - int k, err; - - *top = 0; - /* Make k index the deepest non-null offset + 1 */ - for (k = depth; k > 1 && !offsets[k-1]; k--) - ; - partial = ext3_get_branch(inode, k, offsets, chain, &err); - /* Writer: pointers */ - if (!partial) - partial = chain + k-1; - /* - * If the branch acquired continuation since we've looked at it - - * fine, it should all survive and (new) top doesn't belong to us. - */ - if (!partial->key && *partial->p) - /* Writer: end */ - goto no_top; - for (p=partial; p>chain && all_zeroes((__le32*)p->bh->b_data,p->p); p--) - ; - /* - * OK, we've found the last block that must survive. The rest of our - * branch should be detached before unlocking. However, if that rest - * of branch is all ours and does not grow immediately from the inode - * it's easier to cheat and just decrement partial->p. - */ - if (p == chain + k - 1 && p > chain) { - p->p--; - } else { - *top = *p->p; - /* Nope, don't do this in ext3. Must leave the tree intact */ -#if 0 - *p->p = 0; -#endif - } - /* Writer: end */ - - while(partial > p) { - brelse(partial->bh); - partial--; - } -no_top: - return partial; -} - -/* - * Zero a number of block pointers in either an inode or an indirect block. - * If we restart the transaction we must again get write access to the - * indirect block for further modification. - * - * We release `count' blocks on disk, but (last - first) may be greater - * than `count' because there can be holes in there. - */ -static void ext3_clear_blocks(handle_t *handle, struct inode *inode, - struct buffer_head *bh, ext3_fsblk_t block_to_free, - unsigned long count, __le32 *first, __le32 *last) -{ - __le32 *p; - if (try_to_extend_transaction(handle, inode)) { - if (bh) { - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - if (ext3_journal_dirty_metadata(handle, bh)) - return; - } - ext3_mark_inode_dirty(handle, inode); - truncate_restart_transaction(handle, inode); - if (bh) { - BUFFER_TRACE(bh, "retaking write access"); - if (ext3_journal_get_write_access(handle, bh)) - return; - } - } - - /* - * Any buffers which are on the journal will be in memory. We find - * them on the hash table so journal_revoke() will run journal_forget() - * on them. We've already detached each block from the file, so - * bforget() in journal_forget() should be safe. - * - * AKPM: turn on bforget in journal_forget()!!! - */ - for (p = first; p < last; p++) { - u32 nr = le32_to_cpu(*p); - if (nr) { - struct buffer_head *bh; - - *p = 0; - bh = sb_find_get_block(inode->i_sb, nr); - ext3_forget(handle, 0, inode, bh, nr); - } - } - - ext3_free_blocks(handle, inode, block_to_free, count); -} - -/** - * ext3_free_data - free a list of data blocks - * @handle: handle for this transaction - * @inode: inode we are dealing with - * @this_bh: indirect buffer_head which contains *@first and *@last - * @first: array of block numbers - * @last: points immediately past the end of array - * - * We are freeing all blocks referred from that array (numbers are stored as - * little-endian 32-bit) and updating @inode->i_blocks appropriately. - * - * We accumulate contiguous runs of blocks to free. Conveniently, if these - * blocks are contiguous then releasing them at one time will only affect one - * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't - * actually use a lot of journal space. - * - * @this_bh will be %NULL if @first and @last point into the inode's direct - * block pointers. - */ -static void ext3_free_data(handle_t *handle, struct inode *inode, - struct buffer_head *this_bh, - __le32 *first, __le32 *last) -{ - ext3_fsblk_t block_to_free = 0; /* Starting block # of a run */ - unsigned long count = 0; /* Number of blocks in the run */ - __le32 *block_to_free_p = NULL; /* Pointer into inode/ind - corresponding to - block_to_free */ - ext3_fsblk_t nr; /* Current block # */ - __le32 *p; /* Pointer into inode/ind - for current block */ - int err; - - if (this_bh) { /* For indirect block */ - BUFFER_TRACE(this_bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, this_bh); - /* Important: if we can't update the indirect pointers - * to the blocks, we can't free them. */ - if (err) - return; - } - - for (p = first; p < last; p++) { - nr = le32_to_cpu(*p); - if (nr) { - /* accumulate blocks to free if they're contiguous */ - if (count == 0) { - block_to_free = nr; - block_to_free_p = p; - count = 1; - } else if (nr == block_to_free + count) { - count++; - } else { - ext3_clear_blocks(handle, inode, this_bh, - block_to_free, - count, block_to_free_p, p); - block_to_free = nr; - block_to_free_p = p; - count = 1; - } - } - } - - if (count > 0) - ext3_clear_blocks(handle, inode, this_bh, block_to_free, - count, block_to_free_p, p); - - if (this_bh) { - BUFFER_TRACE(this_bh, "call ext3_journal_dirty_metadata"); - - /* - * The buffer head should have an attached journal head at this - * point. However, if the data is corrupted and an indirect - * block pointed to itself, it would have been detached when - * the block was cleared. Check for this instead of OOPSing. - */ - if (bh2jh(this_bh)) - ext3_journal_dirty_metadata(handle, this_bh); - else - ext3_error(inode->i_sb, "ext3_free_data", - "circular indirect block detected, " - "inode=%lu, block=%llu", - inode->i_ino, - (unsigned long long)this_bh->b_blocknr); - } -} - -/** - * ext3_free_branches - free an array of branches - * @handle: JBD handle for this transaction - * @inode: inode we are dealing with - * @parent_bh: the buffer_head which contains *@first and *@last - * @first: array of block numbers - * @last: pointer immediately past the end of array - * @depth: depth of the branches to free - * - * We are freeing all blocks referred from these branches (numbers are - * stored as little-endian 32-bit) and updating @inode->i_blocks - * appropriately. - */ -static void ext3_free_branches(handle_t *handle, struct inode *inode, - struct buffer_head *parent_bh, - __le32 *first, __le32 *last, int depth) -{ - ext3_fsblk_t nr; - __le32 *p; - - if (is_handle_aborted(handle)) - return; - - if (depth--) { - struct buffer_head *bh; - int addr_per_block = EXT3_ADDR_PER_BLOCK(inode->i_sb); - p = last; - while (--p >= first) { - nr = le32_to_cpu(*p); - if (!nr) - continue; /* A hole */ - - /* Go read the buffer for the next level down */ - bh = sb_bread(inode->i_sb, nr); - - /* - * A read failure? Report error and clear slot - * (should be rare). - */ - if (!bh) { - ext3_error(inode->i_sb, "ext3_free_branches", - "Read failure, inode=%lu, block="E3FSBLK, - inode->i_ino, nr); - continue; - } - - /* This zaps the entire block. Bottom up. */ - BUFFER_TRACE(bh, "free child branches"); - ext3_free_branches(handle, inode, bh, - (__le32*)bh->b_data, - (__le32*)bh->b_data + addr_per_block, - depth); - - /* - * Everything below this this pointer has been - * released. Now let this top-of-subtree go. - * - * We want the freeing of this indirect block to be - * atomic in the journal with the updating of the - * bitmap block which owns it. So make some room in - * the journal. - * - * We zero the parent pointer *after* freeing its - * pointee in the bitmaps, so if extend_transaction() - * for some reason fails to put the bitmap changes and - * the release into the same transaction, recovery - * will merely complain about releasing a free block, - * rather than leaking blocks. - */ - if (is_handle_aborted(handle)) - return; - if (try_to_extend_transaction(handle, inode)) { - ext3_mark_inode_dirty(handle, inode); - truncate_restart_transaction(handle, inode); - } - - /* - * We've probably journalled the indirect block several - * times during the truncate. But it's no longer - * needed and we now drop it from the transaction via - * journal_revoke(). - * - * That's easy if it's exclusively part of this - * transaction. But if it's part of the committing - * transaction then journal_forget() will simply - * brelse() it. That means that if the underlying - * block is reallocated in ext3_get_block(), - * unmap_underlying_metadata() will find this block - * and will try to get rid of it. damn, damn. Thus - * we don't allow a block to be reallocated until - * a transaction freeing it has fully committed. - * - * We also have to make sure journal replay after a - * crash does not overwrite non-journaled data blocks - * with old metadata when the block got reallocated for - * data. Thus we have to store a revoke record for a - * block in the same transaction in which we free the - * block. - */ - ext3_forget(handle, 1, inode, bh, bh->b_blocknr); - - ext3_free_blocks(handle, inode, nr, 1); - - if (parent_bh) { - /* - * The block which we have just freed is - * pointed to by an indirect block: journal it - */ - BUFFER_TRACE(parent_bh, "get_write_access"); - if (!ext3_journal_get_write_access(handle, - parent_bh)){ - *p = 0; - BUFFER_TRACE(parent_bh, - "call ext3_journal_dirty_metadata"); - ext3_journal_dirty_metadata(handle, - parent_bh); - } - } - } - } else { - /* We have reached the bottom of the tree. */ - BUFFER_TRACE(parent_bh, "free data blocks"); - ext3_free_data(handle, inode, parent_bh, first, last); - } -} - -int ext3_can_truncate(struct inode *inode) -{ - if (S_ISREG(inode->i_mode)) - return 1; - if (S_ISDIR(inode->i_mode)) - return 1; - if (S_ISLNK(inode->i_mode)) - return !ext3_inode_is_fast_symlink(inode); - return 0; -} - -/* - * ext3_truncate() - * - * We block out ext3_get_block() block instantiations across the entire - * transaction, and VFS/VM ensures that ext3_truncate() cannot run - * simultaneously on behalf of the same inode. - * - * As we work through the truncate and commit bits of it to the journal there - * is one core, guiding principle: the file's tree must always be consistent on - * disk. We must be able to restart the truncate after a crash. - * - * The file's tree may be transiently inconsistent in memory (although it - * probably isn't), but whenever we close off and commit a journal transaction, - * the contents of (the filesystem + the journal) must be consistent and - * restartable. It's pretty simple, really: bottom up, right to left (although - * left-to-right works OK too). - * - * Note that at recovery time, journal replay occurs *before* the restart of - * truncate against the orphan inode list. - * - * The committed inode has the new, desired i_size (which is the same as - * i_disksize in this case). After a crash, ext3_orphan_cleanup() will see - * that this inode's truncate did not complete and it will again call - * ext3_truncate() to have another go. So there will be instantiated blocks - * to the right of the truncation point in a crashed ext3 filesystem. But - * that's fine - as long as they are linked from the inode, the post-crash - * ext3_truncate() run will find them and release them. - */ -void ext3_truncate(struct inode *inode) -{ - handle_t *handle; - struct ext3_inode_info *ei = EXT3_I(inode); - __le32 *i_data = ei->i_data; - int addr_per_block = EXT3_ADDR_PER_BLOCK(inode->i_sb); - int offsets[4]; - Indirect chain[4]; - Indirect *partial; - __le32 nr = 0; - int n; - long last_block; - unsigned blocksize = inode->i_sb->s_blocksize; - - trace_ext3_truncate_enter(inode); - - if (!ext3_can_truncate(inode)) - goto out_notrans; - - if (inode->i_size == 0 && ext3_should_writeback_data(inode)) - ext3_set_inode_state(inode, EXT3_STATE_FLUSH_ON_CLOSE); - - handle = start_transaction(inode); - if (IS_ERR(handle)) - goto out_notrans; - - last_block = (inode->i_size + blocksize-1) - >> EXT3_BLOCK_SIZE_BITS(inode->i_sb); - n = ext3_block_to_path(inode, last_block, offsets, NULL); - if (n == 0) - goto out_stop; /* error */ - - /* - * OK. This truncate is going to happen. We add the inode to the - * orphan list, so that if this truncate spans multiple transactions, - * and we crash, we will resume the truncate when the filesystem - * recovers. It also marks the inode dirty, to catch the new size. - * - * Implication: the file must always be in a sane, consistent - * truncatable state while each transaction commits. - */ - if (ext3_orphan_add(handle, inode)) - goto out_stop; - - /* - * The orphan list entry will now protect us from any crash which - * occurs before the truncate completes, so it is now safe to propagate - * the new, shorter inode size (held for now in i_size) into the - * on-disk inode. We do this via i_disksize, which is the value which - * ext3 *really* writes onto the disk inode. - */ - ei->i_disksize = inode->i_size; - - /* - * From here we block out all ext3_get_block() callers who want to - * modify the block allocation tree. - */ - mutex_lock(&ei->truncate_mutex); - - if (n == 1) { /* direct blocks */ - ext3_free_data(handle, inode, NULL, i_data+offsets[0], - i_data + EXT3_NDIR_BLOCKS); - goto do_indirects; - } - - partial = ext3_find_shared(inode, n, offsets, chain, &nr); - /* Kill the top of shared branch (not detached) */ - if (nr) { - if (partial == chain) { - /* Shared branch grows from the inode */ - ext3_free_branches(handle, inode, NULL, - &nr, &nr+1, (chain+n-1) - partial); - *partial->p = 0; - /* - * We mark the inode dirty prior to restart, - * and prior to stop. No need for it here. - */ - } else { - /* Shared branch grows from an indirect block */ - ext3_free_branches(handle, inode, partial->bh, - partial->p, - partial->p+1, (chain+n-1) - partial); - } - } - /* Clear the ends of indirect blocks on the shared branch */ - while (partial > chain) { - ext3_free_branches(handle, inode, partial->bh, partial->p + 1, - (__le32*)partial->bh->b_data+addr_per_block, - (chain+n-1) - partial); - BUFFER_TRACE(partial->bh, "call brelse"); - brelse (partial->bh); - partial--; - } -do_indirects: - /* Kill the remaining (whole) subtrees */ - switch (offsets[0]) { - default: - nr = i_data[EXT3_IND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 1); - i_data[EXT3_IND_BLOCK] = 0; - } - case EXT3_IND_BLOCK: - nr = i_data[EXT3_DIND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 2); - i_data[EXT3_DIND_BLOCK] = 0; - } - case EXT3_DIND_BLOCK: - nr = i_data[EXT3_TIND_BLOCK]; - if (nr) { - ext3_free_branches(handle, inode, NULL, &nr, &nr+1, 3); - i_data[EXT3_TIND_BLOCK] = 0; - } - case EXT3_TIND_BLOCK: - ; - } - - ext3_discard_reservation(inode); - - mutex_unlock(&ei->truncate_mutex); - inode->i_mtime = inode->i_ctime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, inode); - - /* - * In a multi-transaction truncate, we only make the final transaction - * synchronous - */ - if (IS_SYNC(inode)) - handle->h_sync = 1; -out_stop: - /* - * If this was a simple ftruncate(), and the file will remain alive - * then we need to clear up the orphan record which we created above. - * However, if this was a real unlink then we were called by - * ext3_evict_inode(), and we allow that function to clean up the - * orphan info for us. - */ - if (inode->i_nlink) - ext3_orphan_del(handle, inode); - - ext3_journal_stop(handle); - trace_ext3_truncate_exit(inode); - return; -out_notrans: - /* - * Delete the inode from orphan list so that it doesn't stay there - * forever and trigger assertion on umount. - */ - if (inode->i_nlink) - ext3_orphan_del(NULL, inode); - trace_ext3_truncate_exit(inode); -} - -static ext3_fsblk_t ext3_get_inode_block(struct super_block *sb, - unsigned long ino, struct ext3_iloc *iloc) -{ - unsigned long block_group; - unsigned long offset; - ext3_fsblk_t block; - struct ext3_group_desc *gdp; - - if (!ext3_valid_inum(sb, ino)) { - /* - * This error is already checked for in namei.c unless we are - * looking at an NFS filehandle, in which case no error - * report is needed - */ - return 0; - } - - block_group = (ino - 1) / EXT3_INODES_PER_GROUP(sb); - gdp = ext3_get_group_desc(sb, block_group, NULL); - if (!gdp) - return 0; - /* - * Figure out the offset within the block group inode table - */ - offset = ((ino - 1) % EXT3_INODES_PER_GROUP(sb)) * - EXT3_INODE_SIZE(sb); - block = le32_to_cpu(gdp->bg_inode_table) + - (offset >> EXT3_BLOCK_SIZE_BITS(sb)); - - iloc->block_group = block_group; - iloc->offset = offset & (EXT3_BLOCK_SIZE(sb) - 1); - return block; -} - -/* - * ext3_get_inode_loc returns with an extra refcount against the inode's - * underlying buffer_head on success. If 'in_mem' is true, we have all - * data in memory that is needed to recreate the on-disk version of this - * inode. - */ -static int __ext3_get_inode_loc(struct inode *inode, - struct ext3_iloc *iloc, int in_mem) -{ - ext3_fsblk_t block; - struct buffer_head *bh; - - block = ext3_get_inode_block(inode->i_sb, inode->i_ino, iloc); - if (!block) - return -EIO; - - bh = sb_getblk(inode->i_sb, block); - if (!bh) { - ext3_error (inode->i_sb, "ext3_get_inode_loc", - "unable to read inode block - " - "inode=%lu, block="E3FSBLK, - inode->i_ino, block); - return -EIO; - } - if (!buffer_uptodate(bh)) { - lock_buffer(bh); - - /* - * If the buffer has the write error flag, we have failed - * to write out another inode in the same block. In this - * case, we don't have to read the block because we may - * read the old inode data successfully. - */ - if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) - set_buffer_uptodate(bh); - - if (buffer_uptodate(bh)) { - /* someone brought it uptodate while we waited */ - unlock_buffer(bh); - goto has_buffer; - } - - /* - * If we have all information of the inode in memory and this - * is the only valid inode in the block, we need not read the - * block. - */ - if (in_mem) { - struct buffer_head *bitmap_bh; - struct ext3_group_desc *desc; - int inodes_per_buffer; - int inode_offset, i; - int block_group; - int start; - - block_group = (inode->i_ino - 1) / - EXT3_INODES_PER_GROUP(inode->i_sb); - inodes_per_buffer = bh->b_size / - EXT3_INODE_SIZE(inode->i_sb); - inode_offset = ((inode->i_ino - 1) % - EXT3_INODES_PER_GROUP(inode->i_sb)); - start = inode_offset & ~(inodes_per_buffer - 1); - - /* Is the inode bitmap in cache? */ - desc = ext3_get_group_desc(inode->i_sb, - block_group, NULL); - if (!desc) - goto make_io; - - bitmap_bh = sb_getblk(inode->i_sb, - le32_to_cpu(desc->bg_inode_bitmap)); - if (!bitmap_bh) - goto make_io; - - /* - * If the inode bitmap isn't in cache then the - * optimisation may end up performing two reads instead - * of one, so skip it. - */ - if (!buffer_uptodate(bitmap_bh)) { - brelse(bitmap_bh); - goto make_io; - } - for (i = start; i < start + inodes_per_buffer; i++) { - if (i == inode_offset) - continue; - if (ext3_test_bit(i, bitmap_bh->b_data)) - break; - } - brelse(bitmap_bh); - if (i == start + inodes_per_buffer) { - /* all other inodes are free, so skip I/O */ - memset(bh->b_data, 0, bh->b_size); - set_buffer_uptodate(bh); - unlock_buffer(bh); - goto has_buffer; - } - } - -make_io: - /* - * There are other valid inodes in the buffer, this inode - * has in-inode xattrs, or we don't have this inode in memory. - * Read the block from disk. - */ - trace_ext3_load_inode(inode); - get_bh(bh); - bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META | REQ_PRIO, bh); - wait_on_buffer(bh); - if (!buffer_uptodate(bh)) { - ext3_error(inode->i_sb, "ext3_get_inode_loc", - "unable to read inode block - " - "inode=%lu, block="E3FSBLK, - inode->i_ino, block); - brelse(bh); - return -EIO; - } - } -has_buffer: - iloc->bh = bh; - return 0; -} - -int ext3_get_inode_loc(struct inode *inode, struct ext3_iloc *iloc) -{ - /* We have all inode data except xattrs in memory here. */ - return __ext3_get_inode_loc(inode, iloc, - !ext3_test_inode_state(inode, EXT3_STATE_XATTR)); -} - -void ext3_set_inode_flags(struct inode *inode) -{ - unsigned int flags = EXT3_I(inode)->i_flags; - - inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC); - if (flags & EXT3_SYNC_FL) - inode->i_flags |= S_SYNC; - if (flags & EXT3_APPEND_FL) - inode->i_flags |= S_APPEND; - if (flags & EXT3_IMMUTABLE_FL) - inode->i_flags |= S_IMMUTABLE; - if (flags & EXT3_NOATIME_FL) - inode->i_flags |= S_NOATIME; - if (flags & EXT3_DIRSYNC_FL) - inode->i_flags |= S_DIRSYNC; -} - -/* Propagate flags from i_flags to EXT3_I(inode)->i_flags */ -void ext3_get_inode_flags(struct ext3_inode_info *ei) -{ - unsigned int flags = ei->vfs_inode.i_flags; - - ei->i_flags &= ~(EXT3_SYNC_FL|EXT3_APPEND_FL| - EXT3_IMMUTABLE_FL|EXT3_NOATIME_FL|EXT3_DIRSYNC_FL); - if (flags & S_SYNC) - ei->i_flags |= EXT3_SYNC_FL; - if (flags & S_APPEND) - ei->i_flags |= EXT3_APPEND_FL; - if (flags & S_IMMUTABLE) - ei->i_flags |= EXT3_IMMUTABLE_FL; - if (flags & S_NOATIME) - ei->i_flags |= EXT3_NOATIME_FL; - if (flags & S_DIRSYNC) - ei->i_flags |= EXT3_DIRSYNC_FL; -} - -struct inode *ext3_iget(struct super_block *sb, unsigned long ino) -{ - struct ext3_iloc iloc; - struct ext3_inode *raw_inode; - struct ext3_inode_info *ei; - struct buffer_head *bh; - struct inode *inode; - journal_t *journal = EXT3_SB(sb)->s_journal; - transaction_t *transaction; - long ret; - int block; - - inode = iget_locked(sb, ino); - if (!inode) - return ERR_PTR(-ENOMEM); - if (!(inode->i_state & I_NEW)) - return inode; - - ei = EXT3_I(inode); - ei->i_block_alloc_info = NULL; - - ret = __ext3_get_inode_loc(inode, &iloc, 0); - if (ret < 0) - goto bad_inode; - bh = iloc.bh; - raw_inode = ext3_raw_inode(&iloc); - inode->i_mode = le16_to_cpu(raw_inode->i_mode); - inode->i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); - inode->i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); - if(!(test_opt (inode->i_sb, NO_UID32))) { - inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; - inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; - } - set_nlink(inode, le16_to_cpu(raw_inode->i_links_count)); - inode->i_size = le32_to_cpu(raw_inode->i_size); - inode->i_atime.tv_sec = (signed)le32_to_cpu(raw_inode->i_atime); - inode->i_ctime.tv_sec = (signed)le32_to_cpu(raw_inode->i_ctime); - inode->i_mtime.tv_sec = (signed)le32_to_cpu(raw_inode->i_mtime); - inode->i_atime.tv_nsec = inode->i_ctime.tv_nsec = inode->i_mtime.tv_nsec = 0; - - ei->i_state_flags = 0; - ei->i_dir_start_lookup = 0; - ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); - /* We now have enough fields to check if the inode was active or not. - * This is needed because nfsd might try to access dead inodes - * the test is that same one that e2fsck uses - * NeilBrown 1999oct15 - */ - if (inode->i_nlink == 0) { - if (inode->i_mode == 0 || - !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { - /* this inode is deleted */ - brelse (bh); - ret = -ESTALE; - goto bad_inode; - } - /* The only unlinked inodes we let through here have - * valid i_mode and are being read by the orphan - * recovery code: that's fine, we're about to complete - * the process of deleting those. */ - } - inode->i_blocks = le32_to_cpu(raw_inode->i_blocks); - ei->i_flags = le32_to_cpu(raw_inode->i_flags); -#ifdef EXT3_FRAGMENTS - ei->i_faddr = le32_to_cpu(raw_inode->i_faddr); - ei->i_frag_no = raw_inode->i_frag; - ei->i_frag_size = raw_inode->i_fsize; -#endif - ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl); - if (!S_ISREG(inode->i_mode)) { - ei->i_dir_acl = le32_to_cpu(raw_inode->i_dir_acl); - } else { - inode->i_size |= - ((__u64)le32_to_cpu(raw_inode->i_size_high)) << 32; - } - ei->i_disksize = inode->i_size; - inode->i_generation = le32_to_cpu(raw_inode->i_generation); - ei->i_block_group = iloc.block_group; - /* - * NOTE! The in-memory inode i_data array is in little-endian order - * even on big-endian machines: we do NOT byteswap the block numbers! - */ - for (block = 0; block < EXT3_N_BLOCKS; block++) - ei->i_data[block] = raw_inode->i_block[block]; - INIT_LIST_HEAD(&ei->i_orphan); - - /* - * Set transaction id's of transactions that have to be committed - * to finish f[data]sync. We set them to currently running transaction - * as we cannot be sure that the inode or some of its metadata isn't - * part of the transaction - the inode could have been reclaimed and - * now it is reread from disk. - */ - if (journal) { - tid_t tid; - - spin_lock(&journal->j_state_lock); - if (journal->j_running_transaction) - transaction = journal->j_running_transaction; - else - transaction = journal->j_committing_transaction; - if (transaction) - tid = transaction->t_tid; - else - tid = journal->j_commit_sequence; - spin_unlock(&journal->j_state_lock); - atomic_set(&ei->i_sync_tid, tid); - atomic_set(&ei->i_datasync_tid, tid); - } - - if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 && - EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) { - /* - * When mke2fs creates big inodes it does not zero out - * the unused bytes above EXT3_GOOD_OLD_INODE_SIZE, - * so ignore those first few inodes. - */ - ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); - if (EXT3_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > - EXT3_INODE_SIZE(inode->i_sb)) { - brelse (bh); - ret = -EIO; - goto bad_inode; - } - if (ei->i_extra_isize == 0) { - /* The extra space is currently unused. Use it. */ - ei->i_extra_isize = sizeof(struct ext3_inode) - - EXT3_GOOD_OLD_INODE_SIZE; - } else { - __le32 *magic = (void *)raw_inode + - EXT3_GOOD_OLD_INODE_SIZE + - ei->i_extra_isize; - if (*magic == cpu_to_le32(EXT3_XATTR_MAGIC)) - ext3_set_inode_state(inode, EXT3_STATE_XATTR); - } - } else - ei->i_extra_isize = 0; - - if (S_ISREG(inode->i_mode)) { - inode->i_op = &ext3_file_inode_operations; - inode->i_fop = &ext3_file_operations; - ext3_set_aops(inode); - } else if (S_ISDIR(inode->i_mode)) { - inode->i_op = &ext3_dir_inode_operations; - inode->i_fop = &ext3_dir_operations; - } else if (S_ISLNK(inode->i_mode)) { - if (ext3_inode_is_fast_symlink(inode)) { - inode->i_op = &ext3_fast_symlink_inode_operations; - nd_terminate_link(ei->i_data, inode->i_size, - sizeof(ei->i_data) - 1); - } else { - inode->i_op = &ext3_symlink_inode_operations; - ext3_set_aops(inode); - } - } else { - inode->i_op = &ext3_special_inode_operations; - if (raw_inode->i_block[0]) - init_special_inode(inode, inode->i_mode, - old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); - else - init_special_inode(inode, inode->i_mode, - new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); - } - brelse (iloc.bh); - ext3_set_inode_flags(inode); - unlock_new_inode(inode); - return inode; - -bad_inode: - iget_failed(inode); - return ERR_PTR(ret); -} - -/* - * Post the struct inode info into an on-disk inode location in the - * buffer-cache. This gobbles the caller's reference to the - * buffer_head in the inode location struct. - * - * The caller must have write access to iloc->bh. - */ -static int ext3_do_update_inode(handle_t *handle, - struct inode *inode, - struct ext3_iloc *iloc) -{ - struct ext3_inode *raw_inode = ext3_raw_inode(iloc); - struct ext3_inode_info *ei = EXT3_I(inode); - struct buffer_head *bh = iloc->bh; - int err = 0, rc, block; - -again: - /* we can't allow multiple procs in here at once, its a bit racey */ - lock_buffer(bh); - - /* For fields not not tracking in the in-memory inode, - * initialise them to zero for new inodes. */ - if (ext3_test_inode_state(inode, EXT3_STATE_NEW)) - memset(raw_inode, 0, EXT3_SB(inode->i_sb)->s_inode_size); - - ext3_get_inode_flags(ei); - raw_inode->i_mode = cpu_to_le16(inode->i_mode); - if(!(test_opt(inode->i_sb, NO_UID32))) { - raw_inode->i_uid_low = cpu_to_le16(low_16_bits(inode->i_uid)); - raw_inode->i_gid_low = cpu_to_le16(low_16_bits(inode->i_gid)); -/* - * Fix up interoperability with old kernels. Otherwise, old inodes get - * re-used with the upper 16 bits of the uid/gid intact - */ - if(!ei->i_dtime) { - raw_inode->i_uid_high = - cpu_to_le16(high_16_bits(inode->i_uid)); - raw_inode->i_gid_high = - cpu_to_le16(high_16_bits(inode->i_gid)); - } else { - raw_inode->i_uid_high = 0; - raw_inode->i_gid_high = 0; - } - } else { - raw_inode->i_uid_low = - cpu_to_le16(fs_high2lowuid(inode->i_uid)); - raw_inode->i_gid_low = - cpu_to_le16(fs_high2lowgid(inode->i_gid)); - raw_inode->i_uid_high = 0; - raw_inode->i_gid_high = 0; - } - raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); - raw_inode->i_size = cpu_to_le32(ei->i_disksize); - raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec); - raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec); - raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec); - raw_inode->i_blocks = cpu_to_le32(inode->i_blocks); - raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); - raw_inode->i_flags = cpu_to_le32(ei->i_flags); -#ifdef EXT3_FRAGMENTS - raw_inode->i_faddr = cpu_to_le32(ei->i_faddr); - raw_inode->i_frag = ei->i_frag_no; - raw_inode->i_fsize = ei->i_frag_size; -#endif - raw_inode->i_file_acl = cpu_to_le32(ei->i_file_acl); - if (!S_ISREG(inode->i_mode)) { - raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl); - } else { - raw_inode->i_size_high = - cpu_to_le32(ei->i_disksize >> 32); - if (ei->i_disksize > 0x7fffffffULL) { - struct super_block *sb = inode->i_sb; - if (!EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_LARGE_FILE) || - EXT3_SB(sb)->s_es->s_rev_level == - cpu_to_le32(EXT3_GOOD_OLD_REV)) { - /* If this is the first large file - * created, add a flag to the superblock. - */ - unlock_buffer(bh); - err = ext3_journal_get_write_access(handle, - EXT3_SB(sb)->s_sbh); - if (err) - goto out_brelse; - - ext3_update_dynamic_rev(sb); - EXT3_SET_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_LARGE_FILE); - handle->h_sync = 1; - err = ext3_journal_dirty_metadata(handle, - EXT3_SB(sb)->s_sbh); - /* get our lock and start over */ - goto again; - } - } - } - raw_inode->i_generation = cpu_to_le32(inode->i_generation); - if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { - if (old_valid_dev(inode->i_rdev)) { - raw_inode->i_block[0] = - cpu_to_le32(old_encode_dev(inode->i_rdev)); - raw_inode->i_block[1] = 0; - } else { - raw_inode->i_block[0] = 0; - raw_inode->i_block[1] = - cpu_to_le32(new_encode_dev(inode->i_rdev)); - raw_inode->i_block[2] = 0; - } - } else for (block = 0; block < EXT3_N_BLOCKS; block++) - raw_inode->i_block[block] = ei->i_data[block]; - - if (ei->i_extra_isize) - raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); - - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - unlock_buffer(bh); - rc = ext3_journal_dirty_metadata(handle, bh); - if (!err) - err = rc; - ext3_clear_inode_state(inode, EXT3_STATE_NEW); - - atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); -out_brelse: - brelse (bh); - ext3_std_error(inode->i_sb, err); - return err; -} - -/* - * ext3_write_inode() - * - * We are called from a few places: - * - * - Within generic_file_write() for O_SYNC files. - * Here, there will be no transaction running. We wait for any running - * trasnaction to commit. - * - * - Within sys_sync(), kupdate and such. - * We wait on commit, if tol to. - * - * - Within prune_icache() (PF_MEMALLOC == true) - * Here we simply return. We can't afford to block kswapd on the - * journal commit. - * - * In all cases it is actually safe for us to return without doing anything, - * because the inode has been copied into a raw inode buffer in - * ext3_mark_inode_dirty(). This is a correctness thing for O_SYNC and for - * knfsd. - * - * Note that we are absolutely dependent upon all inode dirtiers doing the - * right thing: they *must* call mark_inode_dirty() after dirtying info in - * which we are interested. - * - * It would be a bug for them to not do this. The code: - * - * mark_inode_dirty(inode) - * stuff(); - * inode->i_size = expr; - * - * is in error because a kswapd-driven write_inode() could occur while - * `stuff()' is running, and the new i_size will be lost. Plus the inode - * will no longer be on the superblock's dirty inode list. - */ -int ext3_write_inode(struct inode *inode, struct writeback_control *wbc) -{ - if (current->flags & PF_MEMALLOC) - return 0; - - if (ext3_journal_current_handle()) { - jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n"); - dump_stack(); - return -EIO; - } - - if (wbc->sync_mode != WB_SYNC_ALL) - return 0; - - return ext3_force_commit(inode->i_sb); -} - -/* - * ext3_setattr() - * - * Called from notify_change. - * - * We want to trap VFS attempts to truncate the file as soon as - * possible. In particular, we want to make sure that when the VFS - * shrinks i_size, we put the inode on the orphan list and modify - * i_disksize immediately, so that during the subsequent flushing of - * dirty pages and freeing of disk blocks, we can guarantee that any - * commit will leave the blocks being flushed in an unused state on - * disk. (On recovery, the inode will get truncated and the blocks will - * be freed, so we have a strong guarantee that no future commit will - * leave these blocks visible to the user.) - * - * Called with inode->sem down. - */ -int ext3_setattr(struct dentry *dentry, struct iattr *attr) -{ - struct inode *inode = dentry->d_inode; - int error, rc = 0; - const unsigned int ia_valid = attr->ia_valid; - - error = inode_change_ok(inode, attr); - if (error) - return error; - - if (is_quota_modification(inode, attr)) - dquot_initialize(inode); - if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || - (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { - handle_t *handle; - - /* (user+group)*(old+new) structure, inode write (sb, - * inode block, ? - but truncate inode update has it) */ - handle = ext3_journal_start(inode, EXT3_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)+ - EXT3_MAXQUOTAS_DEL_BLOCKS(inode->i_sb)+3); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - goto err_out; - } - error = dquot_transfer(inode, attr); - if (error) { - ext3_journal_stop(handle); - return error; - } - /* Update corresponding info in inode so that everything is in - * one transaction */ - if (attr->ia_valid & ATTR_UID) - inode->i_uid = attr->ia_uid; - if (attr->ia_valid & ATTR_GID) - inode->i_gid = attr->ia_gid; - error = ext3_mark_inode_dirty(handle, inode); - ext3_journal_stop(handle); - } - - if (attr->ia_valid & ATTR_SIZE) - inode_dio_wait(inode); - - if (S_ISREG(inode->i_mode) && - attr->ia_valid & ATTR_SIZE && attr->ia_size < inode->i_size) { - handle_t *handle; - - handle = ext3_journal_start(inode, 3); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - goto err_out; - } - - error = ext3_orphan_add(handle, inode); - if (error) { - ext3_journal_stop(handle); - goto err_out; - } - EXT3_I(inode)->i_disksize = attr->ia_size; - error = ext3_mark_inode_dirty(handle, inode); - ext3_journal_stop(handle); - if (error) { - /* Some hard fs error must have happened. Bail out. */ - ext3_orphan_del(NULL, inode); - goto err_out; - } - rc = ext3_block_truncate_page(inode, attr->ia_size); - if (rc) { - /* Cleanup orphan list and exit */ - handle = ext3_journal_start(inode, 3); - if (IS_ERR(handle)) { - ext3_orphan_del(NULL, inode); - goto err_out; - } - ext3_orphan_del(handle, inode); - ext3_journal_stop(handle); - goto err_out; - } - } - - if ((attr->ia_valid & ATTR_SIZE) && - attr->ia_size != i_size_read(inode)) { - truncate_setsize(inode, attr->ia_size); - ext3_truncate(inode); - } - - setattr_copy(inode, attr); - mark_inode_dirty(inode); - - if (ia_valid & ATTR_MODE) - rc = ext3_acl_chmod(inode); - -err_out: - ext3_std_error(inode->i_sb, error); - if (!error) - error = rc; - return error; -} - - -/* - * How many blocks doth make a writepage()? - * - * With N blocks per page, it may be: - * N data blocks - * 2 indirect block - * 2 dindirect - * 1 tindirect - * N+5 bitmap blocks (from the above) - * N+5 group descriptor summary blocks - * 1 inode block - * 1 superblock. - * 2 * EXT3_SINGLEDATA_TRANS_BLOCKS for the quote files - * - * 3 * (N + 5) + 2 + 2 * EXT3_SINGLEDATA_TRANS_BLOCKS - * - * With ordered or writeback data it's the same, less the N data blocks. - * - * If the inode's direct blocks can hold an integral number of pages then a - * page cannot straddle two indirect blocks, and we can only touch one indirect - * and dindirect block, and the "5" above becomes "3". - * - * This still overestimates under most circumstances. If we were to pass the - * start and end offsets in here as well we could do block_to_path() on each - * block and work out the exact number of indirects which are touched. Pah. - */ - -static int ext3_writepage_trans_blocks(struct inode *inode) -{ - int bpp = ext3_journal_blocks_per_page(inode); - int indirects = (EXT3_NDIR_BLOCKS % bpp) ? 5 : 3; - int ret; - - if (ext3_should_journal_data(inode)) - ret = 3 * (bpp + indirects) + 2; - else - ret = 2 * (bpp + indirects) + indirects + 2; - -#ifdef CONFIG_QUOTA - /* We know that structure was already allocated during dquot_initialize so - * we will be updating only the data blocks + inodes */ - ret += EXT3_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb); -#endif - - return ret; -} - -/* - * The caller must have previously called ext3_reserve_inode_write(). - * Give this, we know that the caller already has write access to iloc->bh. - */ -int ext3_mark_iloc_dirty(handle_t *handle, - struct inode *inode, struct ext3_iloc *iloc) -{ - int err = 0; - - /* the do_update_inode consumes one bh->b_count */ - get_bh(iloc->bh); - - /* ext3_do_update_inode() does journal_dirty_metadata */ - err = ext3_do_update_inode(handle, inode, iloc); - put_bh(iloc->bh); - return err; -} - -/* - * On success, We end up with an outstanding reference count against - * iloc->bh. This _must_ be cleaned up later. - */ - -int -ext3_reserve_inode_write(handle_t *handle, struct inode *inode, - struct ext3_iloc *iloc) -{ - int err = 0; - if (handle) { - err = ext3_get_inode_loc(inode, iloc); - if (!err) { - BUFFER_TRACE(iloc->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, iloc->bh); - if (err) { - brelse(iloc->bh); - iloc->bh = NULL; - } - } - } - ext3_std_error(inode->i_sb, err); - return err; -} - -/* - * What we do here is to mark the in-core inode as clean with respect to inode - * dirtiness (it may still be data-dirty). - * This means that the in-core inode may be reaped by prune_icache - * without having to perform any I/O. This is a very good thing, - * because *any* task may call prune_icache - even ones which - * have a transaction open against a different journal. - * - * Is this cheating? Not really. Sure, we haven't written the - * inode out, but prune_icache isn't a user-visible syncing function. - * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) - * we start and wait on commits. - * - * Is this efficient/effective? Well, we're being nice to the system - * by cleaning up our inodes proactively so they can be reaped - * without I/O. But we are potentially leaving up to five seconds' - * worth of inodes floating about which prune_icache wants us to - * write out. One way to fix that would be to get prune_icache() - * to do a write_super() to free up some memory. It has the desired - * effect. - */ -int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode) -{ - struct ext3_iloc iloc; - int err; - - might_sleep(); - trace_ext3_mark_inode_dirty(inode, _RET_IP_); - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (!err) - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - return err; -} - -/* - * ext3_dirty_inode() is called from __mark_inode_dirty() - * - * We're really interested in the case where a file is being extended. - * i_size has been changed by generic_commit_write() and we thus need - * to include the updated inode in the current transaction. - * - * Also, dquot_alloc_space() will always dirty the inode when blocks - * are allocated to the file. - * - * If the inode is marked synchronous, we don't honour that here - doing - * so would cause a commit on atime updates, which we don't bother doing. - * We handle synchronous inodes at the highest possible level. - */ -void ext3_dirty_inode(struct inode *inode, int flags) -{ - handle_t *current_handle = ext3_journal_current_handle(); - handle_t *handle; - - handle = ext3_journal_start(inode, 2); - if (IS_ERR(handle)) - goto out; - if (current_handle && - current_handle->h_transaction != handle->h_transaction) { - /* This task has a transaction open against a different fs */ - printk(KERN_EMERG "%s: transactions do not match!\n", - __func__); - } else { - jbd_debug(5, "marking dirty. outer handle=%p\n", - current_handle); - ext3_mark_inode_dirty(handle, inode); - } - ext3_journal_stop(handle); -out: - return; -} - -#if 0 -/* - * Bind an inode's backing buffer_head into this transaction, to prevent - * it from being flushed to disk early. Unlike - * ext3_reserve_inode_write, this leaves behind no bh reference and - * returns no iloc structure, so the caller needs to repeat the iloc - * lookup to mark the inode dirty later. - */ -static int ext3_pin_inode(handle_t *handle, struct inode *inode) -{ - struct ext3_iloc iloc; - - int err = 0; - if (handle) { - err = ext3_get_inode_loc(inode, &iloc); - if (!err) { - BUFFER_TRACE(iloc.bh, "get_write_access"); - err = journal_get_write_access(handle, iloc.bh); - if (!err) - err = ext3_journal_dirty_metadata(handle, - iloc.bh); - brelse(iloc.bh); - } - } - ext3_std_error(inode->i_sb, err); - return err; -} -#endif - -int ext3_change_inode_journal_flag(struct inode *inode, int val) -{ - journal_t *journal; - handle_t *handle; - int err; - - /* - * We have to be very careful here: changing a data block's - * journaling status dynamically is dangerous. If we write a - * data block to the journal, change the status and then delete - * that block, we risk forgetting to revoke the old log record - * from the journal and so a subsequent replay can corrupt data. - * So, first we make sure that the journal is empty and that - * nobody is changing anything. - */ - - journal = EXT3_JOURNAL(inode); - if (is_journal_aborted(journal)) - return -EROFS; - - journal_lock_updates(journal); - journal_flush(journal); - - /* - * OK, there are no updates running now, and all cached data is - * synced to disk. We are now in a completely consistent state - * which doesn't have anything in the journal, and we know that - * no filesystem updates are running, so it is safe to modify - * the inode's in-core data-journaling state flag now. - */ - - if (val) - EXT3_I(inode)->i_flags |= EXT3_JOURNAL_DATA_FL; - else - EXT3_I(inode)->i_flags &= ~EXT3_JOURNAL_DATA_FL; - ext3_set_aops(inode); - - journal_unlock_updates(journal); - - /* Finally we can mark the inode as dirty. */ - - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - err = ext3_mark_inode_dirty(handle, inode); - handle->h_sync = 1; - ext3_journal_stop(handle); - ext3_std_error(inode->i_sb, err); - - return err; -} diff --git a/ANDROID_3.4.5/fs/ext3/ioctl.c b/ANDROID_3.4.5/fs/ext3/ioctl.c deleted file mode 100644 index 677a5c27..00000000 --- a/ANDROID_3.4.5/fs/ext3/ioctl.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * linux/fs/ext3/ioctl.c - * - * Copyright (C) 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - */ - -#include <linux/mount.h> -#include <linux/compat.h> -#include <asm/uaccess.h> -#include "ext3.h" - -long ext3_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - struct inode *inode = filp->f_dentry->d_inode; - struct ext3_inode_info *ei = EXT3_I(inode); - unsigned int flags; - unsigned short rsv_window_size; - - ext3_debug ("cmd = %u, arg = %lu\n", cmd, arg); - - switch (cmd) { - case EXT3_IOC_GETFLAGS: - ext3_get_inode_flags(ei); - flags = ei->i_flags & EXT3_FL_USER_VISIBLE; - return put_user(flags, (int __user *) arg); - case EXT3_IOC_SETFLAGS: { - handle_t *handle = NULL; - int err; - struct ext3_iloc iloc; - unsigned int oldflags; - unsigned int jflag; - - if (!inode_owner_or_capable(inode)) - return -EACCES; - - if (get_user(flags, (int __user *) arg)) - return -EFAULT; - - err = mnt_want_write_file(filp); - if (err) - return err; - - flags = ext3_mask_flags(inode->i_mode, flags); - - mutex_lock(&inode->i_mutex); - - /* Is it quota file? Do not allow user to mess with it */ - err = -EPERM; - if (IS_NOQUOTA(inode)) - goto flags_out; - - oldflags = ei->i_flags; - - /* The JOURNAL_DATA flag is modifiable only by root */ - jflag = flags & EXT3_JOURNAL_DATA_FL; - - /* - * The IMMUTABLE and APPEND_ONLY flags can only be changed by - * the relevant capability. - * - * This test looks nicer. Thanks to Pauline Middelink - */ - if ((flags ^ oldflags) & (EXT3_APPEND_FL | EXT3_IMMUTABLE_FL)) { - if (!capable(CAP_LINUX_IMMUTABLE)) - goto flags_out; - } - - /* - * The JOURNAL_DATA flag can only be changed by - * the relevant capability. - */ - if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) { - if (!capable(CAP_SYS_RESOURCE)) - goto flags_out; - } - - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto flags_out; - } - if (IS_SYNC(inode)) - handle->h_sync = 1; - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err) - goto flags_err; - - flags = flags & EXT3_FL_USER_MODIFIABLE; - flags |= oldflags & ~EXT3_FL_USER_MODIFIABLE; - ei->i_flags = flags; - - ext3_set_inode_flags(inode); - inode->i_ctime = CURRENT_TIME_SEC; - - err = ext3_mark_iloc_dirty(handle, inode, &iloc); -flags_err: - ext3_journal_stop(handle); - if (err) - goto flags_out; - - if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) - err = ext3_change_inode_journal_flag(inode, jflag); -flags_out: - mutex_unlock(&inode->i_mutex); - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GETVERSION: - case EXT3_IOC_GETVERSION_OLD: - return put_user(inode->i_generation, (int __user *) arg); - case EXT3_IOC_SETVERSION: - case EXT3_IOC_SETVERSION_OLD: { - handle_t *handle; - struct ext3_iloc iloc; - __u32 generation; - int err; - - if (!inode_owner_or_capable(inode)) - return -EPERM; - - err = mnt_want_write_file(filp); - if (err) - return err; - if (get_user(generation, (int __user *) arg)) { - err = -EFAULT; - goto setversion_out; - } - - mutex_lock(&inode->i_mutex); - handle = ext3_journal_start(inode, 1); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto unlock_out; - } - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err == 0) { - inode->i_ctime = CURRENT_TIME_SEC; - inode->i_generation = generation; - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - } - ext3_journal_stop(handle); - -unlock_out: - mutex_unlock(&inode->i_mutex); -setversion_out: - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GETRSVSZ: - if (test_opt(inode->i_sb, RESERVATION) - && S_ISREG(inode->i_mode) - && ei->i_block_alloc_info) { - rsv_window_size = ei->i_block_alloc_info->rsv_window_node.rsv_goal_size; - return put_user(rsv_window_size, (int __user *)arg); - } - return -ENOTTY; - case EXT3_IOC_SETRSVSZ: { - int err; - - if (!test_opt(inode->i_sb, RESERVATION) ||!S_ISREG(inode->i_mode)) - return -ENOTTY; - - err = mnt_want_write_file(filp); - if (err) - return err; - - if (!inode_owner_or_capable(inode)) { - err = -EACCES; - goto setrsvsz_out; - } - - if (get_user(rsv_window_size, (int __user *)arg)) { - err = -EFAULT; - goto setrsvsz_out; - } - - if (rsv_window_size > EXT3_MAX_RESERVE_BLOCKS) - rsv_window_size = EXT3_MAX_RESERVE_BLOCKS; - - /* - * need to allocate reservation structure for this inode - * before set the window size - */ - mutex_lock(&ei->truncate_mutex); - if (!ei->i_block_alloc_info) - ext3_init_block_alloc_info(inode); - - if (ei->i_block_alloc_info){ - struct ext3_reserve_window_node *rsv = &ei->i_block_alloc_info->rsv_window_node; - rsv->rsv_goal_size = rsv_window_size; - } - mutex_unlock(&ei->truncate_mutex); -setrsvsz_out: - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GROUP_EXTEND: { - ext3_fsblk_t n_blocks_count; - struct super_block *sb = inode->i_sb; - int err, err2; - - if (!capable(CAP_SYS_RESOURCE)) - return -EPERM; - - err = mnt_want_write_file(filp); - if (err) - return err; - - if (get_user(n_blocks_count, (__u32 __user *)arg)) { - err = -EFAULT; - goto group_extend_out; - } - err = ext3_group_extend(sb, EXT3_SB(sb)->s_es, n_blocks_count); - journal_lock_updates(EXT3_SB(sb)->s_journal); - err2 = journal_flush(EXT3_SB(sb)->s_journal); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - if (err == 0) - err = err2; -group_extend_out: - mnt_drop_write_file(filp); - return err; - } - case EXT3_IOC_GROUP_ADD: { - struct ext3_new_group_data input; - struct super_block *sb = inode->i_sb; - int err, err2; - - if (!capable(CAP_SYS_RESOURCE)) - return -EPERM; - - err = mnt_want_write_file(filp); - if (err) - return err; - - if (copy_from_user(&input, (struct ext3_new_group_input __user *)arg, - sizeof(input))) { - err = -EFAULT; - goto group_add_out; - } - - err = ext3_group_add(sb, &input); - journal_lock_updates(EXT3_SB(sb)->s_journal); - err2 = journal_flush(EXT3_SB(sb)->s_journal); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - if (err == 0) - err = err2; -group_add_out: - mnt_drop_write_file(filp); - return err; - } - case FITRIM: { - - struct super_block *sb = inode->i_sb; - struct fstrim_range range; - int ret = 0; - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if (copy_from_user(&range, (struct fstrim_range __user *)arg, - sizeof(range))) - return -EFAULT; - - ret = ext3_trim_fs(sb, &range); - if (ret < 0) - return ret; - - if (copy_to_user((struct fstrim_range __user *)arg, &range, - sizeof(range))) - return -EFAULT; - - return 0; - } - - default: - return -ENOTTY; - } -} - -#ifdef CONFIG_COMPAT -long ext3_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - /* These are just misnamed, they actually get/put from/to user an int */ - switch (cmd) { - case EXT3_IOC32_GETFLAGS: - cmd = EXT3_IOC_GETFLAGS; - break; - case EXT3_IOC32_SETFLAGS: - cmd = EXT3_IOC_SETFLAGS; - break; - case EXT3_IOC32_GETVERSION: - cmd = EXT3_IOC_GETVERSION; - break; - case EXT3_IOC32_SETVERSION: - cmd = EXT3_IOC_SETVERSION; - break; - case EXT3_IOC32_GROUP_EXTEND: - cmd = EXT3_IOC_GROUP_EXTEND; - break; - case EXT3_IOC32_GETVERSION_OLD: - cmd = EXT3_IOC_GETVERSION_OLD; - break; - case EXT3_IOC32_SETVERSION_OLD: - cmd = EXT3_IOC_SETVERSION_OLD; - break; -#ifdef CONFIG_JBD_DEBUG - case EXT3_IOC32_WAIT_FOR_READONLY: - cmd = EXT3_IOC_WAIT_FOR_READONLY; - break; -#endif - case EXT3_IOC32_GETRSVSZ: - cmd = EXT3_IOC_GETRSVSZ; - break; - case EXT3_IOC32_SETRSVSZ: - cmd = EXT3_IOC_SETRSVSZ; - break; - case EXT3_IOC_GROUP_ADD: - break; - default: - return -ENOIOCTLCMD; - } - return ext3_ioctl(file, cmd, (unsigned long) compat_ptr(arg)); -} -#endif diff --git a/ANDROID_3.4.5/fs/ext3/namei.c b/ANDROID_3.4.5/fs/ext3/namei.c deleted file mode 100644 index d7940b24..00000000 --- a/ANDROID_3.4.5/fs/ext3/namei.c +++ /dev/null @@ -1,2541 +0,0 @@ -/* - * linux/fs/ext3/namei.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/namei.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - * Directory entry file type support and forward compatibility hooks - * for B-tree directories by Theodore Ts'o (tytso@mit.edu), 1998 - * Hash Tree Directory indexing (c) - * Daniel Phillips, 2001 - * Hash Tree Directory indexing porting - * Christopher Li, 2002 - * Hash Tree Directory indexing cleanup - * Theodore Ts'o, 2002 - */ - -#include <linux/quotaops.h> -#include "ext3.h" -#include "namei.h" -#include "xattr.h" -#include "acl.h" - -/* - * define how far ahead to read directories while searching them. - */ -#define NAMEI_RA_CHUNKS 2 -#define NAMEI_RA_BLOCKS 4 -#define NAMEI_RA_SIZE (NAMEI_RA_CHUNKS * NAMEI_RA_BLOCKS) -#define NAMEI_RA_INDEX(c,b) (((c) * NAMEI_RA_BLOCKS) + (b)) - -static struct buffer_head *ext3_append(handle_t *handle, - struct inode *inode, - u32 *block, int *err) -{ - struct buffer_head *bh; - - *block = inode->i_size >> inode->i_sb->s_blocksize_bits; - - bh = ext3_bread(handle, inode, *block, 1, err); - if (bh) { - inode->i_size += inode->i_sb->s_blocksize; - EXT3_I(inode)->i_disksize = inode->i_size; - *err = ext3_journal_get_write_access(handle, bh); - if (*err) { - brelse(bh); - bh = NULL; - } - } - return bh; -} - -#ifndef assert -#define assert(test) J_ASSERT(test) -#endif - -#ifdef DX_DEBUG -#define dxtrace(command) command -#else -#define dxtrace(command) -#endif - -struct fake_dirent -{ - __le32 inode; - __le16 rec_len; - u8 name_len; - u8 file_type; -}; - -struct dx_countlimit -{ - __le16 limit; - __le16 count; -}; - -struct dx_entry -{ - __le32 hash; - __le32 block; -}; - -/* - * dx_root_info is laid out so that if it should somehow get overlaid by a - * dirent the two low bits of the hash version will be zero. Therefore, the - * hash version mod 4 should never be 0. Sincerely, the paranoia department. - */ - -struct dx_root -{ - struct fake_dirent dot; - char dot_name[4]; - struct fake_dirent dotdot; - char dotdot_name[4]; - struct dx_root_info - { - __le32 reserved_zero; - u8 hash_version; - u8 info_length; /* 8 */ - u8 indirect_levels; - u8 unused_flags; - } - info; - struct dx_entry entries[0]; -}; - -struct dx_node -{ - struct fake_dirent fake; - struct dx_entry entries[0]; -}; - - -struct dx_frame -{ - struct buffer_head *bh; - struct dx_entry *entries; - struct dx_entry *at; -}; - -struct dx_map_entry -{ - u32 hash; - u16 offs; - u16 size; -}; - -static inline unsigned dx_get_block (struct dx_entry *entry); -static void dx_set_block (struct dx_entry *entry, unsigned value); -static inline unsigned dx_get_hash (struct dx_entry *entry); -static void dx_set_hash (struct dx_entry *entry, unsigned value); -static unsigned dx_get_count (struct dx_entry *entries); -static unsigned dx_get_limit (struct dx_entry *entries); -static void dx_set_count (struct dx_entry *entries, unsigned value); -static void dx_set_limit (struct dx_entry *entries, unsigned value); -static unsigned dx_root_limit (struct inode *dir, unsigned infosize); -static unsigned dx_node_limit (struct inode *dir); -static struct dx_frame *dx_probe(struct qstr *entry, - struct inode *dir, - struct dx_hash_info *hinfo, - struct dx_frame *frame, - int *err); -static void dx_release (struct dx_frame *frames); -static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize, - struct dx_hash_info *hinfo, struct dx_map_entry map[]); -static void dx_sort_map(struct dx_map_entry *map, unsigned count); -static struct ext3_dir_entry_2 *dx_move_dirents (char *from, char *to, - struct dx_map_entry *offsets, int count); -static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize); -static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block); -static int ext3_htree_next_block(struct inode *dir, __u32 hash, - struct dx_frame *frame, - struct dx_frame *frames, - __u32 *start_hash); -static struct buffer_head * ext3_dx_find_entry(struct inode *dir, - struct qstr *entry, struct ext3_dir_entry_2 **res_dir, - int *err); -static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, - struct inode *inode); - -/* - * p is at least 6 bytes before the end of page - */ -static inline struct ext3_dir_entry_2 * -ext3_next_entry(struct ext3_dir_entry_2 *p) -{ - return (struct ext3_dir_entry_2 *)((char *)p + - ext3_rec_len_from_disk(p->rec_len)); -} - -/* - * Future: use high four bits of block for coalesce-on-delete flags - * Mask them off for now. - */ - -static inline unsigned dx_get_block (struct dx_entry *entry) -{ - return le32_to_cpu(entry->block) & 0x00ffffff; -} - -static inline void dx_set_block (struct dx_entry *entry, unsigned value) -{ - entry->block = cpu_to_le32(value); -} - -static inline unsigned dx_get_hash (struct dx_entry *entry) -{ - return le32_to_cpu(entry->hash); -} - -static inline void dx_set_hash (struct dx_entry *entry, unsigned value) -{ - entry->hash = cpu_to_le32(value); -} - -static inline unsigned dx_get_count (struct dx_entry *entries) -{ - return le16_to_cpu(((struct dx_countlimit *) entries)->count); -} - -static inline unsigned dx_get_limit (struct dx_entry *entries) -{ - return le16_to_cpu(((struct dx_countlimit *) entries)->limit); -} - -static inline void dx_set_count (struct dx_entry *entries, unsigned value) -{ - ((struct dx_countlimit *) entries)->count = cpu_to_le16(value); -} - -static inline void dx_set_limit (struct dx_entry *entries, unsigned value) -{ - ((struct dx_countlimit *) entries)->limit = cpu_to_le16(value); -} - -static inline unsigned dx_root_limit (struct inode *dir, unsigned infosize) -{ - unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(1) - - EXT3_DIR_REC_LEN(2) - infosize; - return entry_space / sizeof(struct dx_entry); -} - -static inline unsigned dx_node_limit (struct inode *dir) -{ - unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(0); - return entry_space / sizeof(struct dx_entry); -} - -/* - * Debug - */ -#ifdef DX_DEBUG -static void dx_show_index (char * label, struct dx_entry *entries) -{ - int i, n = dx_get_count (entries); - printk("%s index ", label); - for (i = 0; i < n; i++) - { - printk("%x->%u ", i? dx_get_hash(entries + i): 0, dx_get_block(entries + i)); - } - printk("\n"); -} - -struct stats -{ - unsigned names; - unsigned space; - unsigned bcount; -}; - -static struct stats dx_show_leaf(struct dx_hash_info *hinfo, struct ext3_dir_entry_2 *de, - int size, int show_names) -{ - unsigned names = 0, space = 0; - char *base = (char *) de; - struct dx_hash_info h = *hinfo; - - printk("names: "); - while ((char *) de < base + size) - { - if (de->inode) - { - if (show_names) - { - int len = de->name_len; - char *name = de->name; - while (len--) printk("%c", *name++); - ext3fs_dirhash(de->name, de->name_len, &h); - printk(":%x.%u ", h.hash, - (unsigned) ((char *) de - base)); - } - space += EXT3_DIR_REC_LEN(de->name_len); - names++; - } - de = ext3_next_entry(de); - } - printk("(%i)\n", names); - return (struct stats) { names, space, 1 }; -} - -struct stats dx_show_entries(struct dx_hash_info *hinfo, struct inode *dir, - struct dx_entry *entries, int levels) -{ - unsigned blocksize = dir->i_sb->s_blocksize; - unsigned count = dx_get_count (entries), names = 0, space = 0, i; - unsigned bcount = 0; - struct buffer_head *bh; - int err; - printk("%i indexed blocks...\n", count); - for (i = 0; i < count; i++, entries++) - { - u32 block = dx_get_block(entries), hash = i? dx_get_hash(entries): 0; - u32 range = i < count - 1? (dx_get_hash(entries + 1) - hash): ~hash; - struct stats stats; - printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range); - if (!(bh = ext3_bread (NULL,dir, block, 0,&err))) continue; - stats = levels? - dx_show_entries(hinfo, dir, ((struct dx_node *) bh->b_data)->entries, levels - 1): - dx_show_leaf(hinfo, (struct ext3_dir_entry_2 *) bh->b_data, blocksize, 0); - names += stats.names; - space += stats.space; - bcount += stats.bcount; - brelse (bh); - } - if (bcount) - printk("%snames %u, fullness %u (%u%%)\n", levels?"":" ", - names, space/bcount,(space/bcount)*100/blocksize); - return (struct stats) { names, space, bcount}; -} -#endif /* DX_DEBUG */ - -/* - * Probe for a directory leaf block to search. - * - * dx_probe can return ERR_BAD_DX_DIR, which means there was a format - * error in the directory index, and the caller should fall back to - * searching the directory normally. The callers of dx_probe **MUST** - * check for this error code, and make sure it never gets reflected - * back to userspace. - */ -static struct dx_frame * -dx_probe(struct qstr *entry, struct inode *dir, - struct dx_hash_info *hinfo, struct dx_frame *frame_in, int *err) -{ - unsigned count, indirect; - struct dx_entry *at, *entries, *p, *q, *m; - struct dx_root *root; - struct buffer_head *bh; - struct dx_frame *frame = frame_in; - u32 hash; - - frame->bh = NULL; - if (!(bh = ext3_bread (NULL,dir, 0, 0, err))) - goto fail; - root = (struct dx_root *) bh->b_data; - if (root->info.hash_version != DX_HASH_TEA && - root->info.hash_version != DX_HASH_HALF_MD4 && - root->info.hash_version != DX_HASH_LEGACY) { - ext3_warning(dir->i_sb, __func__, - "Unrecognised inode hash code %d", - root->info.hash_version); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - hinfo->hash_version = root->info.hash_version; - if (hinfo->hash_version <= DX_HASH_TEA) - hinfo->hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned; - hinfo->seed = EXT3_SB(dir->i_sb)->s_hash_seed; - if (entry) - ext3fs_dirhash(entry->name, entry->len, hinfo); - hash = hinfo->hash; - - if (root->info.unused_flags & 1) { - ext3_warning(dir->i_sb, __func__, - "Unimplemented inode hash flags: %#06x", - root->info.unused_flags); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - - if ((indirect = root->info.indirect_levels) > 1) { - ext3_warning(dir->i_sb, __func__, - "Unimplemented inode hash depth: %#06x", - root->info.indirect_levels); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - - entries = (struct dx_entry *) (((char *)&root->info) + - root->info.info_length); - - if (dx_get_limit(entries) != dx_root_limit(dir, - root->info.info_length)) { - ext3_warning(dir->i_sb, __func__, - "dx entry: limit != root limit"); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail; - } - - dxtrace (printk("Look up %x", hash)); - while (1) - { - count = dx_get_count(entries); - if (!count || count > dx_get_limit(entries)) { - ext3_warning(dir->i_sb, __func__, - "dx entry: no count or count > limit"); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail2; - } - - p = entries + 1; - q = entries + count - 1; - while (p <= q) - { - m = p + (q - p)/2; - dxtrace(printk(".")); - if (dx_get_hash(m) > hash) - q = m - 1; - else - p = m + 1; - } - - if (0) // linear search cross check - { - unsigned n = count - 1; - at = entries; - while (n--) - { - dxtrace(printk(",")); - if (dx_get_hash(++at) > hash) - { - at--; - break; - } - } - assert (at == p - 1); - } - - at = p - 1; - dxtrace(printk(" %x->%u\n", at == entries? 0: dx_get_hash(at), dx_get_block(at))); - frame->bh = bh; - frame->entries = entries; - frame->at = at; - if (!indirect--) return frame; - if (!(bh = ext3_bread (NULL,dir, dx_get_block(at), 0, err))) - goto fail2; - at = entries = ((struct dx_node *) bh->b_data)->entries; - if (dx_get_limit(entries) != dx_node_limit (dir)) { - ext3_warning(dir->i_sb, __func__, - "dx entry: limit != node limit"); - brelse(bh); - *err = ERR_BAD_DX_DIR; - goto fail2; - } - frame++; - frame->bh = NULL; - } -fail2: - while (frame >= frame_in) { - brelse(frame->bh); - frame--; - } -fail: - if (*err == ERR_BAD_DX_DIR) - ext3_warning(dir->i_sb, __func__, - "Corrupt dir inode %ld, running e2fsck is " - "recommended.", dir->i_ino); - return NULL; -} - -static void dx_release (struct dx_frame *frames) -{ - if (frames[0].bh == NULL) - return; - - if (((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels) - brelse(frames[1].bh); - brelse(frames[0].bh); -} - -/* - * This function increments the frame pointer to search the next leaf - * block, and reads in the necessary intervening nodes if the search - * should be necessary. Whether or not the search is necessary is - * controlled by the hash parameter. If the hash value is even, then - * the search is only continued if the next block starts with that - * hash value. This is used if we are searching for a specific file. - * - * If the hash value is HASH_NB_ALWAYS, then always go to the next block. - * - * This function returns 1 if the caller should continue to search, - * or 0 if it should not. If there is an error reading one of the - * index blocks, it will a negative error code. - * - * If start_hash is non-null, it will be filled in with the starting - * hash of the next page. - */ -static int ext3_htree_next_block(struct inode *dir, __u32 hash, - struct dx_frame *frame, - struct dx_frame *frames, - __u32 *start_hash) -{ - struct dx_frame *p; - struct buffer_head *bh; - int err, num_frames = 0; - __u32 bhash; - - p = frame; - /* - * Find the next leaf page by incrementing the frame pointer. - * If we run out of entries in the interior node, loop around and - * increment pointer in the parent node. When we break out of - * this loop, num_frames indicates the number of interior - * nodes need to be read. - */ - while (1) { - if (++(p->at) < p->entries + dx_get_count(p->entries)) - break; - if (p == frames) - return 0; - num_frames++; - p--; - } - - /* - * If the hash is 1, then continue only if the next page has a - * continuation hash of any value. This is used for readdir - * handling. Otherwise, check to see if the hash matches the - * desired contiuation hash. If it doesn't, return since - * there's no point to read in the successive index pages. - */ - bhash = dx_get_hash(p->at); - if (start_hash) - *start_hash = bhash; - if ((hash & 1) == 0) { - if ((bhash & ~1) != hash) - return 0; - } - /* - * If the hash is HASH_NB_ALWAYS, we always go to the next - * block so no check is necessary - */ - while (num_frames--) { - if (!(bh = ext3_bread(NULL, dir, dx_get_block(p->at), - 0, &err))) - return err; /* Failure */ - p++; - brelse (p->bh); - p->bh = bh; - p->at = p->entries = ((struct dx_node *) bh->b_data)->entries; - } - return 1; -} - - -/* - * This function fills a red-black tree with information from a - * directory block. It returns the number directory entries loaded - * into the tree. If there is an error it is returned in err. - */ -static int htree_dirblock_to_tree(struct file *dir_file, - struct inode *dir, int block, - struct dx_hash_info *hinfo, - __u32 start_hash, __u32 start_minor_hash) -{ - struct buffer_head *bh; - struct ext3_dir_entry_2 *de, *top; - int err, count = 0; - - dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); - if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) - return err; - - de = (struct ext3_dir_entry_2 *) bh->b_data; - top = (struct ext3_dir_entry_2 *) ((char *) de + - dir->i_sb->s_blocksize - - EXT3_DIR_REC_LEN(0)); - for (; de < top; de = ext3_next_entry(de)) { - if (!ext3_check_dir_entry("htree_dirblock_to_tree", dir, de, bh, - (block<<EXT3_BLOCK_SIZE_BITS(dir->i_sb)) - +((char *)de - bh->b_data))) { - /* On error, skip the f_pos to the next block. */ - dir_file->f_pos = (dir_file->f_pos | - (dir->i_sb->s_blocksize - 1)) + 1; - brelse (bh); - return count; - } - ext3fs_dirhash(de->name, de->name_len, hinfo); - if ((hinfo->hash < start_hash) || - ((hinfo->hash == start_hash) && - (hinfo->minor_hash < start_minor_hash))) - continue; - if (de->inode == 0) - continue; - if ((err = ext3_htree_store_dirent(dir_file, - hinfo->hash, hinfo->minor_hash, de)) != 0) { - brelse(bh); - return err; - } - count++; - } - brelse(bh); - return count; -} - - -/* - * This function fills a red-black tree with information from a - * directory. We start scanning the directory in hash order, starting - * at start_hash and start_minor_hash. - * - * This function returns the number of entries inserted into the tree, - * or a negative error code. - */ -int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash, - __u32 start_minor_hash, __u32 *next_hash) -{ - struct dx_hash_info hinfo; - struct ext3_dir_entry_2 *de; - struct dx_frame frames[2], *frame; - struct inode *dir; - int block, err; - int count = 0; - int ret; - __u32 hashval; - - dxtrace(printk("In htree_fill_tree, start hash: %x:%x\n", start_hash, - start_minor_hash)); - dir = dir_file->f_path.dentry->d_inode; - if (!(EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) { - hinfo.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version; - if (hinfo.hash_version <= DX_HASH_TEA) - hinfo.hash_version += - EXT3_SB(dir->i_sb)->s_hash_unsigned; - hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed; - count = htree_dirblock_to_tree(dir_file, dir, 0, &hinfo, - start_hash, start_minor_hash); - *next_hash = ~0; - return count; - } - hinfo.hash = start_hash; - hinfo.minor_hash = 0; - frame = dx_probe(NULL, dir_file->f_path.dentry->d_inode, &hinfo, frames, &err); - if (!frame) - return err; - - /* Add '.' and '..' from the htree header */ - if (!start_hash && !start_minor_hash) { - de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data; - if ((err = ext3_htree_store_dirent(dir_file, 0, 0, de)) != 0) - goto errout; - count++; - } - if (start_hash < 2 || (start_hash ==2 && start_minor_hash==0)) { - de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data; - de = ext3_next_entry(de); - if ((err = ext3_htree_store_dirent(dir_file, 2, 0, de)) != 0) - goto errout; - count++; - } - - while (1) { - block = dx_get_block(frame->at); - ret = htree_dirblock_to_tree(dir_file, dir, block, &hinfo, - start_hash, start_minor_hash); - if (ret < 0) { - err = ret; - goto errout; - } - count += ret; - hashval = ~0; - ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS, - frame, frames, &hashval); - *next_hash = hashval; - if (ret < 0) { - err = ret; - goto errout; - } - /* - * Stop if: (a) there are no more entries, or - * (b) we have inserted at least one entry and the - * next hash value is not a continuation - */ - if ((ret == 0) || - (count && ((hashval & 1) == 0))) - break; - } - dx_release(frames); - dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n", - count, *next_hash)); - return count; -errout: - dx_release(frames); - return (err); -} - - -/* - * Directory block splitting, compacting - */ - -/* - * Create map of hash values, offsets, and sizes, stored at end of block. - * Returns number of entries mapped. - */ -static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize, - struct dx_hash_info *hinfo, struct dx_map_entry *map_tail) -{ - int count = 0; - char *base = (char *) de; - struct dx_hash_info h = *hinfo; - - while ((char *) de < base + blocksize) - { - if (de->name_len && de->inode) { - ext3fs_dirhash(de->name, de->name_len, &h); - map_tail--; - map_tail->hash = h.hash; - map_tail->offs = (u16) ((char *) de - base); - map_tail->size = le16_to_cpu(de->rec_len); - count++; - cond_resched(); - } - /* XXX: do we need to check rec_len == 0 case? -Chris */ - de = ext3_next_entry(de); - } - return count; -} - -/* Sort map by hash value */ -static void dx_sort_map (struct dx_map_entry *map, unsigned count) -{ - struct dx_map_entry *p, *q, *top = map + count - 1; - int more; - /* Combsort until bubble sort doesn't suck */ - while (count > 2) - { - count = count*10/13; - if (count - 9 < 2) /* 9, 10 -> 11 */ - count = 11; - for (p = top, q = p - count; q >= map; p--, q--) - if (p->hash < q->hash) - swap(*p, *q); - } - /* Garden variety bubble sort */ - do { - more = 0; - q = top; - while (q-- > map) - { - if (q[1].hash >= q[0].hash) - continue; - swap(*(q+1), *q); - more = 1; - } - } while(more); -} - -static void dx_insert_block(struct dx_frame *frame, u32 hash, u32 block) -{ - struct dx_entry *entries = frame->entries; - struct dx_entry *old = frame->at, *new = old + 1; - int count = dx_get_count(entries); - - assert(count < dx_get_limit(entries)); - assert(old < entries + count); - memmove(new + 1, new, (char *)(entries + count) - (char *)(new)); - dx_set_hash(new, hash); - dx_set_block(new, block); - dx_set_count(entries, count + 1); -} - -static void ext3_update_dx_flag(struct inode *inode) -{ - if (!EXT3_HAS_COMPAT_FEATURE(inode->i_sb, - EXT3_FEATURE_COMPAT_DIR_INDEX)) - EXT3_I(inode)->i_flags &= ~EXT3_INDEX_FL; -} - -/* - * NOTE! unlike strncmp, ext3_match returns 1 for success, 0 for failure. - * - * `len <= EXT3_NAME_LEN' is guaranteed by caller. - * `de != NULL' is guaranteed by caller. - */ -static inline int ext3_match (int len, const char * const name, - struct ext3_dir_entry_2 * de) -{ - if (len != de->name_len) - return 0; - if (!de->inode) - return 0; - return !memcmp(name, de->name, len); -} - -/* - * Returns 0 if not found, -1 on failure, and 1 on success - */ -static inline int search_dirblock(struct buffer_head * bh, - struct inode *dir, - struct qstr *child, - unsigned long offset, - struct ext3_dir_entry_2 ** res_dir) -{ - struct ext3_dir_entry_2 * de; - char * dlimit; - int de_len; - const char *name = child->name; - int namelen = child->len; - - de = (struct ext3_dir_entry_2 *) bh->b_data; - dlimit = bh->b_data + dir->i_sb->s_blocksize; - while ((char *) de < dlimit) { - /* this code is executed quadratically often */ - /* do minimal checking `by hand' */ - - if ((char *) de + namelen <= dlimit && - ext3_match (namelen, name, de)) { - /* found a match - just to be sure, do a full check */ - if (!ext3_check_dir_entry("ext3_find_entry", - dir, de, bh, offset)) - return -1; - *res_dir = de; - return 1; - } - /* prevent looping on a bad block */ - de_len = ext3_rec_len_from_disk(de->rec_len); - if (de_len <= 0) - return -1; - offset += de_len; - de = (struct ext3_dir_entry_2 *) ((char *) de + de_len); - } - return 0; -} - - -/* - * ext3_find_entry() - * - * finds an entry in the specified directory with the wanted name. It - * returns the cache buffer in which the entry was found, and the entry - * itself (as a parameter - res_dir). It does NOT read the inode of the - * entry - you'll have to do that yourself if you want to. - * - * The returned buffer_head has ->b_count elevated. The caller is expected - * to brelse() it when appropriate. - */ -static struct buffer_head *ext3_find_entry(struct inode *dir, - struct qstr *entry, - struct ext3_dir_entry_2 **res_dir) -{ - struct super_block * sb; - struct buffer_head * bh_use[NAMEI_RA_SIZE]; - struct buffer_head * bh, *ret = NULL; - unsigned long start, block, b; - const u8 *name = entry->name; - int ra_max = 0; /* Number of bh's in the readahead - buffer, bh_use[] */ - int ra_ptr = 0; /* Current index into readahead - buffer */ - int num = 0; - int nblocks, i, err; - int namelen; - - *res_dir = NULL; - sb = dir->i_sb; - namelen = entry->len; - if (namelen > EXT3_NAME_LEN) - return NULL; - if ((namelen <= 2) && (name[0] == '.') && - (name[1] == '.' || name[1] == 0)) { - /* - * "." or ".." will only be in the first block - * NFS may look up ".."; "." should be handled by the VFS - */ - block = start = 0; - nblocks = 1; - goto restart; - } - if (is_dx(dir)) { - bh = ext3_dx_find_entry(dir, entry, res_dir, &err); - /* - * On success, or if the error was file not found, - * return. Otherwise, fall back to doing a search the - * old fashioned way. - */ - if (bh || (err != ERR_BAD_DX_DIR)) - return bh; - dxtrace(printk("ext3_find_entry: dx failed, falling back\n")); - } - nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb); - start = EXT3_I(dir)->i_dir_start_lookup; - if (start >= nblocks) - start = 0; - block = start; -restart: - do { - /* - * We deal with the read-ahead logic here. - */ - if (ra_ptr >= ra_max) { - /* Refill the readahead buffer */ - ra_ptr = 0; - b = block; - for (ra_max = 0; ra_max < NAMEI_RA_SIZE; ra_max++) { - /* - * Terminate if we reach the end of the - * directory and must wrap, or if our - * search has finished at this block. - */ - if (b >= nblocks || (num && block == start)) { - bh_use[ra_max] = NULL; - break; - } - num++; - bh = ext3_getblk(NULL, dir, b++, 0, &err); - bh_use[ra_max] = bh; - if (bh && !bh_uptodate_or_lock(bh)) { - get_bh(bh); - bh->b_end_io = end_buffer_read_sync; - submit_bh(READ | REQ_META | REQ_PRIO, - bh); - } - } - } - if ((bh = bh_use[ra_ptr++]) == NULL) - goto next; - wait_on_buffer(bh); - if (!buffer_uptodate(bh)) { - /* read error, skip block & hope for the best */ - ext3_error(sb, __func__, "reading directory #%lu " - "offset %lu", dir->i_ino, block); - brelse(bh); - goto next; - } - i = search_dirblock(bh, dir, entry, - block << EXT3_BLOCK_SIZE_BITS(sb), res_dir); - if (i == 1) { - EXT3_I(dir)->i_dir_start_lookup = block; - ret = bh; - goto cleanup_and_exit; - } else { - brelse(bh); - if (i < 0) - goto cleanup_and_exit; - } - next: - if (++block >= nblocks) - block = 0; - } while (block != start); - - /* - * If the directory has grown while we were searching, then - * search the last part of the directory before giving up. - */ - block = nblocks; - nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb); - if (block < nblocks) { - start = 0; - goto restart; - } - -cleanup_and_exit: - /* Clean up the read-ahead blocks */ - for (; ra_ptr < ra_max; ra_ptr++) - brelse (bh_use[ra_ptr]); - return ret; -} - -static struct buffer_head * ext3_dx_find_entry(struct inode *dir, - struct qstr *entry, struct ext3_dir_entry_2 **res_dir, - int *err) -{ - struct super_block *sb = dir->i_sb; - struct dx_hash_info hinfo; - struct dx_frame frames[2], *frame; - struct buffer_head *bh; - unsigned long block; - int retval; - - if (!(frame = dx_probe(entry, dir, &hinfo, frames, err))) - return NULL; - do { - block = dx_get_block(frame->at); - if (!(bh = ext3_bread (NULL,dir, block, 0, err))) - goto errout; - - retval = search_dirblock(bh, dir, entry, - block << EXT3_BLOCK_SIZE_BITS(sb), - res_dir); - if (retval == 1) { - dx_release(frames); - return bh; - } - brelse(bh); - if (retval == -1) { - *err = ERR_BAD_DX_DIR; - goto errout; - } - - /* Check to see if we should continue to search */ - retval = ext3_htree_next_block(dir, hinfo.hash, frame, - frames, NULL); - if (retval < 0) { - ext3_warning(sb, __func__, - "error reading index page in directory #%lu", - dir->i_ino); - *err = retval; - goto errout; - } - } while (retval == 1); - - *err = -ENOENT; -errout: - dxtrace(printk("%s not found\n", entry->name)); - dx_release (frames); - return NULL; -} - -static struct dentry *ext3_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd) -{ - struct inode * inode; - struct ext3_dir_entry_2 * de; - struct buffer_head * bh; - - if (dentry->d_name.len > EXT3_NAME_LEN) - return ERR_PTR(-ENAMETOOLONG); - - bh = ext3_find_entry(dir, &dentry->d_name, &de); - inode = NULL; - if (bh) { - unsigned long ino = le32_to_cpu(de->inode); - brelse (bh); - if (!ext3_valid_inum(dir->i_sb, ino)) { - ext3_error(dir->i_sb, "ext3_lookup", - "bad inode number: %lu", ino); - return ERR_PTR(-EIO); - } - inode = ext3_iget(dir->i_sb, ino); - if (inode == ERR_PTR(-ESTALE)) { - ext3_error(dir->i_sb, __func__, - "deleted inode referenced: %lu", - ino); - return ERR_PTR(-EIO); - } - } - return d_splice_alias(inode, dentry); -} - - -struct dentry *ext3_get_parent(struct dentry *child) -{ - unsigned long ino; - struct qstr dotdot = {.name = "..", .len = 2}; - struct ext3_dir_entry_2 * de; - struct buffer_head *bh; - - bh = ext3_find_entry(child->d_inode, &dotdot, &de); - if (!bh) - return ERR_PTR(-ENOENT); - ino = le32_to_cpu(de->inode); - brelse(bh); - - if (!ext3_valid_inum(child->d_inode->i_sb, ino)) { - ext3_error(child->d_inode->i_sb, "ext3_get_parent", - "bad inode number: %lu", ino); - return ERR_PTR(-EIO); - } - - return d_obtain_alias(ext3_iget(child->d_inode->i_sb, ino)); -} - -#define S_SHIFT 12 -static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = { - [S_IFREG >> S_SHIFT] = EXT3_FT_REG_FILE, - [S_IFDIR >> S_SHIFT] = EXT3_FT_DIR, - [S_IFCHR >> S_SHIFT] = EXT3_FT_CHRDEV, - [S_IFBLK >> S_SHIFT] = EXT3_FT_BLKDEV, - [S_IFIFO >> S_SHIFT] = EXT3_FT_FIFO, - [S_IFSOCK >> S_SHIFT] = EXT3_FT_SOCK, - [S_IFLNK >> S_SHIFT] = EXT3_FT_SYMLINK, -}; - -static inline void ext3_set_de_type(struct super_block *sb, - struct ext3_dir_entry_2 *de, - umode_t mode) { - if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_FILETYPE)) - de->file_type = ext3_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; -} - -/* - * Move count entries from end of map between two memory locations. - * Returns pointer to last entry moved. - */ -static struct ext3_dir_entry_2 * -dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) -{ - unsigned rec_len = 0; - - while (count--) { - struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *) (from + map->offs); - rec_len = EXT3_DIR_REC_LEN(de->name_len); - memcpy (to, de, rec_len); - ((struct ext3_dir_entry_2 *) to)->rec_len = - ext3_rec_len_to_disk(rec_len); - de->inode = 0; - map++; - to += rec_len; - } - return (struct ext3_dir_entry_2 *) (to - rec_len); -} - -/* - * Compact each dir entry in the range to the minimal rec_len. - * Returns pointer to last entry in range. - */ -static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize) -{ - struct ext3_dir_entry_2 *next, *to, *prev; - struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *)base; - unsigned rec_len = 0; - - prev = to = de; - while ((char *)de < base + blocksize) { - next = ext3_next_entry(de); - if (de->inode && de->name_len) { - rec_len = EXT3_DIR_REC_LEN(de->name_len); - if (de > to) - memmove(to, de, rec_len); - to->rec_len = ext3_rec_len_to_disk(rec_len); - prev = to; - to = (struct ext3_dir_entry_2 *) (((char *) to) + rec_len); - } - de = next; - } - return prev; -} - -/* - * Split a full leaf block to make room for a new dir entry. - * Allocate a new block, and move entries so that they are approx. equally full. - * Returns pointer to de in block into which the new entry will be inserted. - */ -static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, - struct buffer_head **bh,struct dx_frame *frame, - struct dx_hash_info *hinfo, int *error) -{ - unsigned blocksize = dir->i_sb->s_blocksize; - unsigned count, continued; - struct buffer_head *bh2; - u32 newblock; - u32 hash2; - struct dx_map_entry *map; - char *data1 = (*bh)->b_data, *data2; - unsigned split, move, size; - struct ext3_dir_entry_2 *de = NULL, *de2; - int err = 0, i; - - bh2 = ext3_append (handle, dir, &newblock, &err); - if (!(bh2)) { - brelse(*bh); - *bh = NULL; - goto errout; - } - - BUFFER_TRACE(*bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, *bh); - if (err) - goto journal_error; - - BUFFER_TRACE(frame->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, frame->bh); - if (err) - goto journal_error; - - data2 = bh2->b_data; - - /* create map in the end of data2 block */ - map = (struct dx_map_entry *) (data2 + blocksize); - count = dx_make_map ((struct ext3_dir_entry_2 *) data1, - blocksize, hinfo, map); - map -= count; - dx_sort_map (map, count); - /* Split the existing block in the middle, size-wise */ - size = 0; - move = 0; - for (i = count-1; i >= 0; i--) { - /* is more than half of this entry in 2nd half of the block? */ - if (size + map[i].size/2 > blocksize/2) - break; - size += map[i].size; - move++; - } - /* map index at which we will split */ - split = count - move; - hash2 = map[split].hash; - continued = hash2 == map[split - 1].hash; - dxtrace(printk("Split block %i at %x, %i/%i\n", - dx_get_block(frame->at), hash2, split, count-split)); - - /* Fancy dance to stay within two buffers */ - de2 = dx_move_dirents(data1, data2, map + split, count - split); - de = dx_pack_dirents(data1,blocksize); - de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de); - de2->rec_len = ext3_rec_len_to_disk(data2 + blocksize - (char *) de2); - dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data1, blocksize, 1)); - dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data2, blocksize, 1)); - - /* Which block gets the new entry? */ - if (hinfo->hash >= hash2) - { - swap(*bh, bh2); - de = de2; - } - dx_insert_block (frame, hash2 + continued, newblock); - err = ext3_journal_dirty_metadata (handle, bh2); - if (err) - goto journal_error; - err = ext3_journal_dirty_metadata (handle, frame->bh); - if (err) - goto journal_error; - brelse (bh2); - dxtrace(dx_show_index ("frame", frame->entries)); - return de; - -journal_error: - brelse(*bh); - brelse(bh2); - *bh = NULL; - ext3_std_error(dir->i_sb, err); -errout: - *error = err; - return NULL; -} - - -/* - * Add a new entry into a directory (leaf) block. If de is non-NULL, - * it points to a directory entry which is guaranteed to be large - * enough for new directory entry. If de is NULL, then - * add_dirent_to_buf will attempt search the directory block for - * space. It will return -ENOSPC if no space is available, and -EIO - * and -EEXIST if directory entry already exists. - * - * NOTE! bh is NOT released in the case where ENOSPC is returned. In - * all other cases bh is released. - */ -static int add_dirent_to_buf(handle_t *handle, struct dentry *dentry, - struct inode *inode, struct ext3_dir_entry_2 *de, - struct buffer_head * bh) -{ - struct inode *dir = dentry->d_parent->d_inode; - const char *name = dentry->d_name.name; - int namelen = dentry->d_name.len; - unsigned long offset = 0; - unsigned short reclen; - int nlen, rlen, err; - char *top; - - reclen = EXT3_DIR_REC_LEN(namelen); - if (!de) { - de = (struct ext3_dir_entry_2 *)bh->b_data; - top = bh->b_data + dir->i_sb->s_blocksize - reclen; - while ((char *) de <= top) { - if (!ext3_check_dir_entry("ext3_add_entry", dir, de, - bh, offset)) { - brelse (bh); - return -EIO; - } - if (ext3_match (namelen, name, de)) { - brelse (bh); - return -EEXIST; - } - nlen = EXT3_DIR_REC_LEN(de->name_len); - rlen = ext3_rec_len_from_disk(de->rec_len); - if ((de->inode? rlen - nlen: rlen) >= reclen) - break; - de = (struct ext3_dir_entry_2 *)((char *)de + rlen); - offset += rlen; - } - if ((char *) de > top) - return -ENOSPC; - } - BUFFER_TRACE(bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) { - ext3_std_error(dir->i_sb, err); - brelse(bh); - return err; - } - - /* By now the buffer is marked for journaling */ - nlen = EXT3_DIR_REC_LEN(de->name_len); - rlen = ext3_rec_len_from_disk(de->rec_len); - if (de->inode) { - struct ext3_dir_entry_2 *de1 = (struct ext3_dir_entry_2 *)((char *)de + nlen); - de1->rec_len = ext3_rec_len_to_disk(rlen - nlen); - de->rec_len = ext3_rec_len_to_disk(nlen); - de = de1; - } - de->file_type = EXT3_FT_UNKNOWN; - if (inode) { - de->inode = cpu_to_le32(inode->i_ino); - ext3_set_de_type(dir->i_sb, de, inode->i_mode); - } else - de->inode = 0; - de->name_len = namelen; - memcpy (de->name, name, namelen); - /* - * XXX shouldn't update any times until successful - * completion of syscall, but too many callers depend - * on this. - * - * XXX similarly, too many callers depend on - * ext3_new_inode() setting the times, but error - * recovery deletes the inode, so the worst that can - * happen is that the times are slightly out of date - * and/or different from the directory change time. - */ - dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC; - ext3_update_dx_flag(dir); - dir->i_version++; - ext3_mark_inode_dirty(handle, dir); - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) - ext3_std_error(dir->i_sb, err); - brelse(bh); - return 0; -} - -/* - * This converts a one block unindexed directory to a 3 block indexed - * directory, and adds the dentry to the indexed directory. - */ -static int make_indexed_dir(handle_t *handle, struct dentry *dentry, - struct inode *inode, struct buffer_head *bh) -{ - struct inode *dir = dentry->d_parent->d_inode; - const char *name = dentry->d_name.name; - int namelen = dentry->d_name.len; - struct buffer_head *bh2; - struct dx_root *root; - struct dx_frame frames[2], *frame; - struct dx_entry *entries; - struct ext3_dir_entry_2 *de, *de2; - char *data1, *top; - unsigned len; - int retval; - unsigned blocksize; - struct dx_hash_info hinfo; - u32 block; - struct fake_dirent *fde; - - blocksize = dir->i_sb->s_blocksize; - dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino)); - retval = ext3_journal_get_write_access(handle, bh); - if (retval) { - ext3_std_error(dir->i_sb, retval); - brelse(bh); - return retval; - } - root = (struct dx_root *) bh->b_data; - - /* The 0th block becomes the root, move the dirents out */ - fde = &root->dotdot; - de = (struct ext3_dir_entry_2 *)((char *)fde + - ext3_rec_len_from_disk(fde->rec_len)); - if ((char *) de >= (((char *) root) + blocksize)) { - ext3_error(dir->i_sb, __func__, - "invalid rec_len for '..' in inode %lu", - dir->i_ino); - brelse(bh); - return -EIO; - } - len = ((char *) root) + blocksize - (char *) de; - - bh2 = ext3_append (handle, dir, &block, &retval); - if (!(bh2)) { - brelse(bh); - return retval; - } - EXT3_I(dir)->i_flags |= EXT3_INDEX_FL; - data1 = bh2->b_data; - - memcpy (data1, de, len); - de = (struct ext3_dir_entry_2 *) data1; - top = data1 + len; - while ((char *)(de2 = ext3_next_entry(de)) < top) - de = de2; - de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de); - /* Initialize the root; the dot dirents already exist */ - de = (struct ext3_dir_entry_2 *) (&root->dotdot); - de->rec_len = ext3_rec_len_to_disk(blocksize - EXT3_DIR_REC_LEN(2)); - memset (&root->info, 0, sizeof(root->info)); - root->info.info_length = sizeof(root->info); - root->info.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version; - entries = root->entries; - dx_set_block (entries, 1); - dx_set_count (entries, 1); - dx_set_limit (entries, dx_root_limit(dir, sizeof(root->info))); - - /* Initialize as for dx_probe */ - hinfo.hash_version = root->info.hash_version; - if (hinfo.hash_version <= DX_HASH_TEA) - hinfo.hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned; - hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed; - ext3fs_dirhash(name, namelen, &hinfo); - frame = frames; - frame->entries = entries; - frame->at = entries; - frame->bh = bh; - bh = bh2; - /* - * Mark buffers dirty here so that if do_split() fails we write a - * consistent set of buffers to disk. - */ - ext3_journal_dirty_metadata(handle, frame->bh); - ext3_journal_dirty_metadata(handle, bh); - de = do_split(handle,dir, &bh, frame, &hinfo, &retval); - if (!de) { - ext3_mark_inode_dirty(handle, dir); - dx_release(frames); - return retval; - } - dx_release(frames); - - return add_dirent_to_buf(handle, dentry, inode, de, bh); -} - -/* - * ext3_add_entry() - * - * adds a file entry to the specified directory, using the same - * semantics as ext3_find_entry(). It returns NULL if it failed. - * - * NOTE!! The inode part of 'de' is left at 0 - which means you - * may not sleep between calling this and putting something into - * the entry, as someone else might have used it while you slept. - */ -static int ext3_add_entry (handle_t *handle, struct dentry *dentry, - struct inode *inode) -{ - struct inode *dir = dentry->d_parent->d_inode; - struct buffer_head * bh; - struct ext3_dir_entry_2 *de; - struct super_block * sb; - int retval; - int dx_fallback=0; - unsigned blocksize; - u32 block, blocks; - - sb = dir->i_sb; - blocksize = sb->s_blocksize; - if (!dentry->d_name.len) - return -EINVAL; - if (is_dx(dir)) { - retval = ext3_dx_add_entry(handle, dentry, inode); - if (!retval || (retval != ERR_BAD_DX_DIR)) - return retval; - EXT3_I(dir)->i_flags &= ~EXT3_INDEX_FL; - dx_fallback++; - ext3_mark_inode_dirty(handle, dir); - } - blocks = dir->i_size >> sb->s_blocksize_bits; - for (block = 0; block < blocks; block++) { - bh = ext3_bread(handle, dir, block, 0, &retval); - if(!bh) - return retval; - retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh); - if (retval != -ENOSPC) - return retval; - - if (blocks == 1 && !dx_fallback && - EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_DIR_INDEX)) - return make_indexed_dir(handle, dentry, inode, bh); - brelse(bh); - } - bh = ext3_append(handle, dir, &block, &retval); - if (!bh) - return retval; - de = (struct ext3_dir_entry_2 *) bh->b_data; - de->inode = 0; - de->rec_len = ext3_rec_len_to_disk(blocksize); - return add_dirent_to_buf(handle, dentry, inode, de, bh); -} - -/* - * Returns 0 for success, or a negative error value - */ -static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, - struct inode *inode) -{ - struct dx_frame frames[2], *frame; - struct dx_entry *entries, *at; - struct dx_hash_info hinfo; - struct buffer_head * bh; - struct inode *dir = dentry->d_parent->d_inode; - struct super_block * sb = dir->i_sb; - struct ext3_dir_entry_2 *de; - int err; - - frame = dx_probe(&dentry->d_name, dir, &hinfo, frames, &err); - if (!frame) - return err; - entries = frame->entries; - at = frame->at; - - if (!(bh = ext3_bread(handle,dir, dx_get_block(frame->at), 0, &err))) - goto cleanup; - - BUFFER_TRACE(bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) - goto journal_error; - - err = add_dirent_to_buf(handle, dentry, inode, NULL, bh); - if (err != -ENOSPC) { - bh = NULL; - goto cleanup; - } - - /* Block full, should compress but for now just split */ - dxtrace(printk("using %u of %u node entries\n", - dx_get_count(entries), dx_get_limit(entries))); - /* Need to split index? */ - if (dx_get_count(entries) == dx_get_limit(entries)) { - u32 newblock; - unsigned icount = dx_get_count(entries); - int levels = frame - frames; - struct dx_entry *entries2; - struct dx_node *node2; - struct buffer_head *bh2; - - if (levels && (dx_get_count(frames->entries) == - dx_get_limit(frames->entries))) { - ext3_warning(sb, __func__, - "Directory index full!"); - err = -ENOSPC; - goto cleanup; - } - bh2 = ext3_append (handle, dir, &newblock, &err); - if (!(bh2)) - goto cleanup; - node2 = (struct dx_node *)(bh2->b_data); - entries2 = node2->entries; - memset(&node2->fake, 0, sizeof(struct fake_dirent)); - node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize); - BUFFER_TRACE(frame->bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, frame->bh); - if (err) - goto journal_error; - if (levels) { - unsigned icount1 = icount/2, icount2 = icount - icount1; - unsigned hash2 = dx_get_hash(entries + icount1); - dxtrace(printk("Split index %i/%i\n", icount1, icount2)); - - BUFFER_TRACE(frame->bh, "get_write_access"); /* index root */ - err = ext3_journal_get_write_access(handle, - frames[0].bh); - if (err) - goto journal_error; - - memcpy ((char *) entries2, (char *) (entries + icount1), - icount2 * sizeof(struct dx_entry)); - dx_set_count (entries, icount1); - dx_set_count (entries2, icount2); - dx_set_limit (entries2, dx_node_limit(dir)); - - /* Which index block gets the new entry? */ - if (at - entries >= icount1) { - frame->at = at = at - entries - icount1 + entries2; - frame->entries = entries = entries2; - swap(frame->bh, bh2); - } - dx_insert_block (frames + 0, hash2, newblock); - dxtrace(dx_show_index ("node", frames[1].entries)); - dxtrace(dx_show_index ("node", - ((struct dx_node *) bh2->b_data)->entries)); - err = ext3_journal_dirty_metadata(handle, bh2); - if (err) - goto journal_error; - brelse (bh2); - } else { - dxtrace(printk("Creating second level index...\n")); - memcpy((char *) entries2, (char *) entries, - icount * sizeof(struct dx_entry)); - dx_set_limit(entries2, dx_node_limit(dir)); - - /* Set up root */ - dx_set_count(entries, 1); - dx_set_block(entries + 0, newblock); - ((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels = 1; - - /* Add new access path frame */ - frame = frames + 1; - frame->at = at = at - entries + entries2; - frame->entries = entries = entries2; - frame->bh = bh2; - err = ext3_journal_get_write_access(handle, - frame->bh); - if (err) - goto journal_error; - } - err = ext3_journal_dirty_metadata(handle, frames[0].bh); - if (err) - goto journal_error; - } - de = do_split(handle, dir, &bh, frame, &hinfo, &err); - if (!de) - goto cleanup; - err = add_dirent_to_buf(handle, dentry, inode, de, bh); - bh = NULL; - goto cleanup; - -journal_error: - ext3_std_error(dir->i_sb, err); -cleanup: - if (bh) - brelse(bh); - dx_release(frames); - return err; -} - -/* - * ext3_delete_entry deletes a directory entry by merging it with the - * previous entry - */ -static int ext3_delete_entry (handle_t *handle, - struct inode * dir, - struct ext3_dir_entry_2 * de_del, - struct buffer_head * bh) -{ - struct ext3_dir_entry_2 * de, * pde; - int i; - - i = 0; - pde = NULL; - de = (struct ext3_dir_entry_2 *) bh->b_data; - while (i < bh->b_size) { - if (!ext3_check_dir_entry("ext3_delete_entry", dir, de, bh, i)) - return -EIO; - if (de == de_del) { - int err; - - BUFFER_TRACE(bh, "get_write_access"); - err = ext3_journal_get_write_access(handle, bh); - if (err) - goto journal_error; - - if (pde) - pde->rec_len = ext3_rec_len_to_disk( - ext3_rec_len_from_disk(pde->rec_len) + - ext3_rec_len_from_disk(de->rec_len)); - else - de->inode = 0; - dir->i_version++; - BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) { -journal_error: - ext3_std_error(dir->i_sb, err); - return err; - } - return 0; - } - i += ext3_rec_len_from_disk(de->rec_len); - pde = de; - de = ext3_next_entry(de); - } - return -ENOENT; -} - -static int ext3_add_nondir(handle_t *handle, - struct dentry *dentry, struct inode *inode) -{ - int err = ext3_add_entry(handle, dentry, inode); - if (!err) { - ext3_mark_inode_dirty(handle, inode); - d_instantiate(dentry, inode); - unlock_new_inode(inode); - return 0; - } - drop_nlink(inode); - unlock_new_inode(inode); - iput(inode); - return err; -} - -/* - * By the time this is called, we already have created - * the directory cache entry for the new file, but it - * is so far negative - it has no inode. - * - * If the create succeeds, we fill in the inode information - * with d_instantiate(). - */ -static int ext3_create (struct inode * dir, struct dentry * dentry, umode_t mode, - struct nameidata *nd) -{ - handle_t *handle; - struct inode * inode; - int err, retries = 0; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, mode); - err = PTR_ERR(inode); - if (!IS_ERR(inode)) { - inode->i_op = &ext3_file_inode_operations; - inode->i_fop = &ext3_file_operations; - ext3_set_aops(inode); - err = ext3_add_nondir(handle, dentry, inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -static int ext3_mknod (struct inode * dir, struct dentry *dentry, - umode_t mode, dev_t rdev) -{ - handle_t *handle; - struct inode *inode; - int err, retries = 0; - - if (!new_valid_dev(rdev)) - return -EINVAL; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, mode); - err = PTR_ERR(inode); - if (!IS_ERR(inode)) { - init_special_inode(inode, inode->i_mode, rdev); -#ifdef CONFIG_EXT3_FS_XATTR - inode->i_op = &ext3_special_inode_operations; -#endif - err = ext3_add_nondir(handle, dentry, inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -static int ext3_mkdir(struct inode * dir, struct dentry * dentry, umode_t mode) -{ - handle_t *handle; - struct inode * inode; - struct buffer_head * dir_block = NULL; - struct ext3_dir_entry_2 * de; - int err, retries = 0; - - if (dir->i_nlink >= EXT3_LINK_MAX) - return -EMLINK; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, S_IFDIR | mode); - err = PTR_ERR(inode); - if (IS_ERR(inode)) - goto out_stop; - - inode->i_op = &ext3_dir_inode_operations; - inode->i_fop = &ext3_dir_operations; - inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize; - dir_block = ext3_bread (handle, inode, 0, 1, &err); - if (!dir_block) - goto out_clear_inode; - - BUFFER_TRACE(dir_block, "get_write_access"); - err = ext3_journal_get_write_access(handle, dir_block); - if (err) - goto out_clear_inode; - - de = (struct ext3_dir_entry_2 *) dir_block->b_data; - de->inode = cpu_to_le32(inode->i_ino); - de->name_len = 1; - de->rec_len = ext3_rec_len_to_disk(EXT3_DIR_REC_LEN(de->name_len)); - strcpy (de->name, "."); - ext3_set_de_type(dir->i_sb, de, S_IFDIR); - de = ext3_next_entry(de); - de->inode = cpu_to_le32(dir->i_ino); - de->rec_len = ext3_rec_len_to_disk(inode->i_sb->s_blocksize - - EXT3_DIR_REC_LEN(1)); - de->name_len = 2; - strcpy (de->name, ".."); - ext3_set_de_type(dir->i_sb, de, S_IFDIR); - set_nlink(inode, 2); - BUFFER_TRACE(dir_block, "call ext3_journal_dirty_metadata"); - err = ext3_journal_dirty_metadata(handle, dir_block); - if (err) - goto out_clear_inode; - - err = ext3_mark_inode_dirty(handle, inode); - if (!err) - err = ext3_add_entry (handle, dentry, inode); - - if (err) { -out_clear_inode: - clear_nlink(inode); - unlock_new_inode(inode); - ext3_mark_inode_dirty(handle, inode); - iput (inode); - goto out_stop; - } - inc_nlink(dir); - ext3_update_dx_flag(dir); - err = ext3_mark_inode_dirty(handle, dir); - if (err) - goto out_clear_inode; - - d_instantiate(dentry, inode); - unlock_new_inode(inode); -out_stop: - brelse(dir_block); - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -/* - * routine to check that the specified directory is empty (for rmdir) - */ -static int empty_dir (struct inode * inode) -{ - unsigned long offset; - struct buffer_head * bh; - struct ext3_dir_entry_2 * de, * de1; - struct super_block * sb; - int err = 0; - - sb = inode->i_sb; - if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) || - !(bh = ext3_bread (NULL, inode, 0, 0, &err))) { - if (err) - ext3_error(inode->i_sb, __func__, - "error %d reading directory #%lu offset 0", - err, inode->i_ino); - else - ext3_warning(inode->i_sb, __func__, - "bad directory (dir #%lu) - no data block", - inode->i_ino); - return 1; - } - de = (struct ext3_dir_entry_2 *) bh->b_data; - de1 = ext3_next_entry(de); - if (le32_to_cpu(de->inode) != inode->i_ino || - !le32_to_cpu(de1->inode) || - strcmp (".", de->name) || - strcmp ("..", de1->name)) { - ext3_warning (inode->i_sb, "empty_dir", - "bad directory (dir #%lu) - no `.' or `..'", - inode->i_ino); - brelse (bh); - return 1; - } - offset = ext3_rec_len_from_disk(de->rec_len) + - ext3_rec_len_from_disk(de1->rec_len); - de = ext3_next_entry(de1); - while (offset < inode->i_size ) { - if (!bh || - (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { - err = 0; - brelse (bh); - bh = ext3_bread (NULL, inode, - offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err); - if (!bh) { - if (err) - ext3_error(sb, __func__, - "error %d reading directory" - " #%lu offset %lu", - err, inode->i_ino, offset); - offset += sb->s_blocksize; - continue; - } - de = (struct ext3_dir_entry_2 *) bh->b_data; - } - if (!ext3_check_dir_entry("empty_dir", inode, de, bh, offset)) { - de = (struct ext3_dir_entry_2 *)(bh->b_data + - sb->s_blocksize); - offset = (offset | (sb->s_blocksize - 1)) + 1; - continue; - } - if (le32_to_cpu(de->inode)) { - brelse (bh); - return 0; - } - offset += ext3_rec_len_from_disk(de->rec_len); - de = ext3_next_entry(de); - } - brelse (bh); - return 1; -} - -/* ext3_orphan_add() links an unlinked or truncated inode into a list of - * such inodes, starting at the superblock, in case we crash before the - * file is closed/deleted, or in case the inode truncate spans multiple - * transactions and the last transaction is not recovered after a crash. - * - * At filesystem recovery time, we walk this list deleting unlinked - * inodes and truncating linked inodes in ext3_orphan_cleanup(). - */ -int ext3_orphan_add(handle_t *handle, struct inode *inode) -{ - struct super_block *sb = inode->i_sb; - struct ext3_iloc iloc; - int err = 0, rc; - - mutex_lock(&EXT3_SB(sb)->s_orphan_lock); - if (!list_empty(&EXT3_I(inode)->i_orphan)) - goto out_unlock; - - /* Orphan handling is only valid for files with data blocks - * being truncated, or files being unlinked. */ - - /* @@@ FIXME: Observation from aviro: - * I think I can trigger J_ASSERT in ext3_orphan_add(). We block - * here (on s_orphan_lock), so race with ext3_link() which might bump - * ->i_nlink. For, say it, character device. Not a regular file, - * not a directory, not a symlink and ->i_nlink > 0. - * - * tytso, 4/25/2009: I'm not sure how that could happen; - * shouldn't the fs core protect us from these sort of - * unlink()/link() races? - */ - J_ASSERT ((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || - S_ISLNK(inode->i_mode)) || inode->i_nlink == 0); - - BUFFER_TRACE(EXT3_SB(sb)->s_sbh, "get_write_access"); - err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh); - if (err) - goto out_unlock; - - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err) - goto out_unlock; - - /* Insert this inode at the head of the on-disk orphan list... */ - NEXT_ORPHAN(inode) = le32_to_cpu(EXT3_SB(sb)->s_es->s_last_orphan); - EXT3_SB(sb)->s_es->s_last_orphan = cpu_to_le32(inode->i_ino); - err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - rc = ext3_mark_iloc_dirty(handle, inode, &iloc); - if (!err) - err = rc; - - /* Only add to the head of the in-memory list if all the - * previous operations succeeded. If the orphan_add is going to - * fail (possibly taking the journal offline), we can't risk - * leaving the inode on the orphan list: stray orphan-list - * entries can cause panics at unmount time. - * - * This is safe: on error we're going to ignore the orphan list - * anyway on the next recovery. */ - if (!err) - list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); - - jbd_debug(4, "superblock will point to %lu\n", inode->i_ino); - jbd_debug(4, "orphan inode %lu will point to %d\n", - inode->i_ino, NEXT_ORPHAN(inode)); -out_unlock: - mutex_unlock(&EXT3_SB(sb)->s_orphan_lock); - ext3_std_error(inode->i_sb, err); - return err; -} - -/* - * ext3_orphan_del() removes an unlinked or truncated inode from the list - * of such inodes stored on disk, because it is finally being cleaned up. - */ -int ext3_orphan_del(handle_t *handle, struct inode *inode) -{ - struct list_head *prev; - struct ext3_inode_info *ei = EXT3_I(inode); - struct ext3_sb_info *sbi; - unsigned long ino_next; - struct ext3_iloc iloc; - int err = 0; - - mutex_lock(&EXT3_SB(inode->i_sb)->s_orphan_lock); - if (list_empty(&ei->i_orphan)) - goto out; - - ino_next = NEXT_ORPHAN(inode); - prev = ei->i_orphan.prev; - sbi = EXT3_SB(inode->i_sb); - - jbd_debug(4, "remove inode %lu from orphan list\n", inode->i_ino); - - list_del_init(&ei->i_orphan); - - /* If we're on an error path, we may not have a valid - * transaction handle with which to update the orphan list on - * disk, but we still need to remove the inode from the linked - * list in memory. */ - if (!handle) - goto out; - - err = ext3_reserve_inode_write(handle, inode, &iloc); - if (err) - goto out_err; - - if (prev == &sbi->s_orphan) { - jbd_debug(4, "superblock will point to %lu\n", ino_next); - BUFFER_TRACE(sbi->s_sbh, "get_write_access"); - err = ext3_journal_get_write_access(handle, sbi->s_sbh); - if (err) - goto out_brelse; - sbi->s_es->s_last_orphan = cpu_to_le32(ino_next); - err = ext3_journal_dirty_metadata(handle, sbi->s_sbh); - } else { - struct ext3_iloc iloc2; - struct inode *i_prev = - &list_entry(prev, struct ext3_inode_info, i_orphan)->vfs_inode; - - jbd_debug(4, "orphan inode %lu will point to %lu\n", - i_prev->i_ino, ino_next); - err = ext3_reserve_inode_write(handle, i_prev, &iloc2); - if (err) - goto out_brelse; - NEXT_ORPHAN(i_prev) = ino_next; - err = ext3_mark_iloc_dirty(handle, i_prev, &iloc2); - } - if (err) - goto out_brelse; - NEXT_ORPHAN(inode) = 0; - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - -out_err: - ext3_std_error(inode->i_sb, err); -out: - mutex_unlock(&EXT3_SB(inode->i_sb)->s_orphan_lock); - return err; - -out_brelse: - brelse(iloc.bh); - goto out_err; -} - -static int ext3_rmdir (struct inode * dir, struct dentry *dentry) -{ - int retval; - struct inode * inode; - struct buffer_head * bh; - struct ext3_dir_entry_2 * de; - handle_t *handle; - - /* Initialize quotas before so that eventual writes go in - * separate transaction */ - dquot_initialize(dir); - dquot_initialize(dentry->d_inode); - - handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - retval = -ENOENT; - bh = ext3_find_entry(dir, &dentry->d_name, &de); - if (!bh) - goto end_rmdir; - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = dentry->d_inode; - - retval = -EIO; - if (le32_to_cpu(de->inode) != inode->i_ino) - goto end_rmdir; - - retval = -ENOTEMPTY; - if (!empty_dir (inode)) - goto end_rmdir; - - retval = ext3_delete_entry(handle, dir, de, bh); - if (retval) - goto end_rmdir; - if (inode->i_nlink != 2) - ext3_warning (inode->i_sb, "ext3_rmdir", - "empty directory has nlink!=2 (%d)", - inode->i_nlink); - inode->i_version++; - clear_nlink(inode); - /* There's no need to set i_disksize: the fact that i_nlink is - * zero will ensure that the right thing happens during any - * recovery. */ - inode->i_size = 0; - ext3_orphan_add(handle, inode); - inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, inode); - drop_nlink(dir); - ext3_update_dx_flag(dir); - ext3_mark_inode_dirty(handle, dir); - -end_rmdir: - ext3_journal_stop(handle); - brelse (bh); - return retval; -} - -static int ext3_unlink(struct inode * dir, struct dentry *dentry) -{ - int retval; - struct inode * inode; - struct buffer_head * bh; - struct ext3_dir_entry_2 * de; - handle_t *handle; - - trace_ext3_unlink_enter(dir, dentry); - /* Initialize quotas before so that eventual writes go - * in separate transaction */ - dquot_initialize(dir); - dquot_initialize(dentry->d_inode); - - handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - retval = -ENOENT; - bh = ext3_find_entry(dir, &dentry->d_name, &de); - if (!bh) - goto end_unlink; - - inode = dentry->d_inode; - - retval = -EIO; - if (le32_to_cpu(de->inode) != inode->i_ino) - goto end_unlink; - - if (!inode->i_nlink) { - ext3_warning (inode->i_sb, "ext3_unlink", - "Deleting nonexistent file (%lu), %d", - inode->i_ino, inode->i_nlink); - set_nlink(inode, 1); - } - retval = ext3_delete_entry(handle, dir, de, bh); - if (retval) - goto end_unlink; - dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC; - ext3_update_dx_flag(dir); - ext3_mark_inode_dirty(handle, dir); - drop_nlink(inode); - if (!inode->i_nlink) - ext3_orphan_add(handle, inode); - inode->i_ctime = dir->i_ctime; - ext3_mark_inode_dirty(handle, inode); - retval = 0; - -end_unlink: - ext3_journal_stop(handle); - brelse (bh); - trace_ext3_unlink_exit(dentry, retval); - return retval; -} - -static int ext3_symlink (struct inode * dir, - struct dentry *dentry, const char * symname) -{ - handle_t *handle; - struct inode * inode; - int l, err, retries = 0; - int credits; - - l = strlen(symname)+1; - if (l > dir->i_sb->s_blocksize) - return -ENAMETOOLONG; - - dquot_initialize(dir); - - if (l > EXT3_N_BLOCKS * 4) { - /* - * For non-fast symlinks, we just allocate inode and put it on - * orphan list in the first transaction => we need bitmap, - * group descriptor, sb, inode block, quota blocks, and - * possibly selinux xattr blocks. - */ - credits = 4 + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) + - EXT3_XATTR_TRANS_BLOCKS; - } else { - /* - * Fast symlink. We have to add entry to directory - * (EXT3_DATA_TRANS_BLOCKS + EXT3_INDEX_EXTRA_TRANS_BLOCKS), - * allocate new inode (bitmap, group descriptor, inode block, - * quota blocks, sb is already counted in previous macros). - */ - credits = EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 + - EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb); - } -retry: - handle = ext3_journal_start(dir, credits); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode = ext3_new_inode (handle, dir, &dentry->d_name, S_IFLNK|S_IRWXUGO); - err = PTR_ERR(inode); - if (IS_ERR(inode)) - goto out_stop; - - if (l > EXT3_N_BLOCKS * 4) { - inode->i_op = &ext3_symlink_inode_operations; - ext3_set_aops(inode); - /* - * We cannot call page_symlink() with transaction started - * because it calls into ext3_write_begin() which acquires page - * lock which ranks below transaction start (and it can also - * wait for journal commit if we are running out of space). So - * we have to stop transaction now and restart it when symlink - * contents is written. - * - * To keep fs consistent in case of crash, we have to put inode - * to orphan list in the mean time. - */ - drop_nlink(inode); - err = ext3_orphan_add(handle, inode); - ext3_journal_stop(handle); - if (err) - goto err_drop_inode; - err = __page_symlink(inode, symname, l, 1); - if (err) - goto err_drop_inode; - /* - * Now inode is being linked into dir (EXT3_DATA_TRANS_BLOCKS - * + EXT3_INDEX_EXTRA_TRANS_BLOCKS), inode is also modified - */ - handle = ext3_journal_start(dir, - EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 1); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto err_drop_inode; - } - set_nlink(inode, 1); - err = ext3_orphan_del(handle, inode); - if (err) { - ext3_journal_stop(handle); - drop_nlink(inode); - goto err_drop_inode; - } - } else { - inode->i_op = &ext3_fast_symlink_inode_operations; - memcpy((char*)&EXT3_I(inode)->i_data,symname,l); - inode->i_size = l-1; - } - EXT3_I(inode)->i_disksize = inode->i_size; - err = ext3_add_nondir(handle, dentry, inode); -out_stop: - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -err_drop_inode: - unlock_new_inode(inode); - iput(inode); - return err; -} - -static int ext3_link (struct dentry * old_dentry, - struct inode * dir, struct dentry *dentry) -{ - handle_t *handle; - struct inode *inode = old_dentry->d_inode; - int err, retries = 0; - - if (inode->i_nlink >= EXT3_LINK_MAX) - return -EMLINK; - - dquot_initialize(dir); - -retry: - handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(dir)) - handle->h_sync = 1; - - inode->i_ctime = CURRENT_TIME_SEC; - inc_nlink(inode); - ihold(inode); - - err = ext3_add_entry(handle, dentry, inode); - if (!err) { - ext3_mark_inode_dirty(handle, inode); - d_instantiate(dentry, inode); - } else { - drop_nlink(inode); - iput(inode); - } - ext3_journal_stop(handle); - if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries)) - goto retry; - return err; -} - -#define PARENT_INO(buffer) \ - (ext3_next_entry((struct ext3_dir_entry_2 *)(buffer))->inode) - -/* - * Anybody can rename anything with this: the permission checks are left to the - * higher-level routines. - */ -static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry, - struct inode * new_dir,struct dentry *new_dentry) -{ - handle_t *handle; - struct inode * old_inode, * new_inode; - struct buffer_head * old_bh, * new_bh, * dir_bh; - struct ext3_dir_entry_2 * old_de, * new_de; - int retval, flush_file = 0; - - dquot_initialize(old_dir); - dquot_initialize(new_dir); - - old_bh = new_bh = dir_bh = NULL; - - /* Initialize quotas before so that eventual writes go - * in separate transaction */ - if (new_dentry->d_inode) - dquot_initialize(new_dentry->d_inode); - handle = ext3_journal_start(old_dir, 2 * - EXT3_DATA_TRANS_BLOCKS(old_dir->i_sb) + - EXT3_INDEX_EXTRA_TRANS_BLOCKS + 2); - if (IS_ERR(handle)) - return PTR_ERR(handle); - - if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir)) - handle->h_sync = 1; - - old_bh = ext3_find_entry(old_dir, &old_dentry->d_name, &old_de); - /* - * Check for inode number is _not_ due to possible IO errors. - * We might rmdir the source, keep it as pwd of some process - * and merrily kill the link to whatever was created under the - * same name. Goodbye sticky bit ;-< - */ - old_inode = old_dentry->d_inode; - retval = -ENOENT; - if (!old_bh || le32_to_cpu(old_de->inode) != old_inode->i_ino) - goto end_rename; - - new_inode = new_dentry->d_inode; - new_bh = ext3_find_entry(new_dir, &new_dentry->d_name, &new_de); - if (new_bh) { - if (!new_inode) { - brelse (new_bh); - new_bh = NULL; - } - } - if (S_ISDIR(old_inode->i_mode)) { - if (new_inode) { - retval = -ENOTEMPTY; - if (!empty_dir (new_inode)) - goto end_rename; - } - retval = -EIO; - dir_bh = ext3_bread (handle, old_inode, 0, 0, &retval); - if (!dir_bh) - goto end_rename; - if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino) - goto end_rename; - retval = -EMLINK; - if (!new_inode && new_dir!=old_dir && - new_dir->i_nlink >= EXT3_LINK_MAX) - goto end_rename; - } - if (!new_bh) { - retval = ext3_add_entry (handle, new_dentry, old_inode); - if (retval) - goto end_rename; - } else { - BUFFER_TRACE(new_bh, "get write access"); - retval = ext3_journal_get_write_access(handle, new_bh); - if (retval) - goto journal_error; - new_de->inode = cpu_to_le32(old_inode->i_ino); - if (EXT3_HAS_INCOMPAT_FEATURE(new_dir->i_sb, - EXT3_FEATURE_INCOMPAT_FILETYPE)) - new_de->file_type = old_de->file_type; - new_dir->i_version++; - new_dir->i_ctime = new_dir->i_mtime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, new_dir); - BUFFER_TRACE(new_bh, "call ext3_journal_dirty_metadata"); - retval = ext3_journal_dirty_metadata(handle, new_bh); - if (retval) - goto journal_error; - brelse(new_bh); - new_bh = NULL; - } - - /* - * Like most other Unix systems, set the ctime for inodes on a - * rename. - */ - old_inode->i_ctime = CURRENT_TIME_SEC; - ext3_mark_inode_dirty(handle, old_inode); - - /* - * ok, that's it - */ - if (le32_to_cpu(old_de->inode) != old_inode->i_ino || - old_de->name_len != old_dentry->d_name.len || - strncmp(old_de->name, old_dentry->d_name.name, old_de->name_len) || - (retval = ext3_delete_entry(handle, old_dir, - old_de, old_bh)) == -ENOENT) { - /* old_de could have moved from under us during htree split, so - * make sure that we are deleting the right entry. We might - * also be pointing to a stale entry in the unused part of - * old_bh so just checking inum and the name isn't enough. */ - struct buffer_head *old_bh2; - struct ext3_dir_entry_2 *old_de2; - - old_bh2 = ext3_find_entry(old_dir, &old_dentry->d_name, - &old_de2); - if (old_bh2) { - retval = ext3_delete_entry(handle, old_dir, - old_de2, old_bh2); - brelse(old_bh2); - } - } - if (retval) { - ext3_warning(old_dir->i_sb, "ext3_rename", - "Deleting old file (%lu), %d, error=%d", - old_dir->i_ino, old_dir->i_nlink, retval); - } - - if (new_inode) { - drop_nlink(new_inode); - new_inode->i_ctime = CURRENT_TIME_SEC; - } - old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME_SEC; - ext3_update_dx_flag(old_dir); - if (dir_bh) { - BUFFER_TRACE(dir_bh, "get_write_access"); - retval = ext3_journal_get_write_access(handle, dir_bh); - if (retval) - goto journal_error; - PARENT_INO(dir_bh->b_data) = cpu_to_le32(new_dir->i_ino); - BUFFER_TRACE(dir_bh, "call ext3_journal_dirty_metadata"); - retval = ext3_journal_dirty_metadata(handle, dir_bh); - if (retval) { -journal_error: - ext3_std_error(new_dir->i_sb, retval); - goto end_rename; - } - drop_nlink(old_dir); - if (new_inode) { - drop_nlink(new_inode); - } else { - inc_nlink(new_dir); - ext3_update_dx_flag(new_dir); - ext3_mark_inode_dirty(handle, new_dir); - } - } - ext3_mark_inode_dirty(handle, old_dir); - if (new_inode) { - ext3_mark_inode_dirty(handle, new_inode); - if (!new_inode->i_nlink) - ext3_orphan_add(handle, new_inode); - if (ext3_should_writeback_data(new_inode)) - flush_file = 1; - } - retval = 0; - -end_rename: - brelse (dir_bh); - brelse (old_bh); - brelse (new_bh); - ext3_journal_stop(handle); - if (retval == 0 && flush_file) - filemap_flush(old_inode->i_mapping); - return retval; -} - -/* - * directories can handle most operations... - */ -const struct inode_operations ext3_dir_inode_operations = { - .create = ext3_create, - .lookup = ext3_lookup, - .link = ext3_link, - .unlink = ext3_unlink, - .symlink = ext3_symlink, - .mkdir = ext3_mkdir, - .rmdir = ext3_rmdir, - .mknod = ext3_mknod, - .rename = ext3_rename, - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif - .get_acl = ext3_get_acl, -}; - -const struct inode_operations ext3_special_inode_operations = { - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif - .get_acl = ext3_get_acl, -}; diff --git a/ANDROID_3.4.5/fs/ext3/namei.h b/ANDROID_3.4.5/fs/ext3/namei.h deleted file mode 100644 index f2ce2b00..00000000 --- a/ANDROID_3.4.5/fs/ext3/namei.h +++ /dev/null @@ -1,8 +0,0 @@ -/* linux/fs/ext3/namei.h - * - * Copyright (C) 2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * -*/ - -extern struct dentry *ext3_get_parent(struct dentry *child); diff --git a/ANDROID_3.4.5/fs/ext3/resize.c b/ANDROID_3.4.5/fs/ext3/resize.c deleted file mode 100644 index 0f814f34..00000000 --- a/ANDROID_3.4.5/fs/ext3/resize.c +++ /dev/null @@ -1,1117 +0,0 @@ -/* - * linux/fs/ext3/resize.c - * - * Support for resizing an ext3 filesystem while it is mounted. - * - * Copyright (C) 2001, 2002 Andreas Dilger <adilger@clusterfs.com> - * - * This could probably be made into a module, because it is not often in use. - */ - - -#define EXT3FS_DEBUG - -#include "ext3.h" - - -#define outside(b, first, last) ((b) < (first) || (b) >= (last)) -#define inside(b, first, last) ((b) >= (first) && (b) < (last)) - -static int verify_group_input(struct super_block *sb, - struct ext3_new_group_data *input) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - ext3_fsblk_t start = le32_to_cpu(es->s_blocks_count); - ext3_fsblk_t end = start + input->blocks_count; - unsigned group = input->group; - ext3_fsblk_t itend = input->inode_table + sbi->s_itb_per_group; - unsigned overhead = ext3_bg_has_super(sb, group) ? - (1 + ext3_bg_num_gdb(sb, group) + - le16_to_cpu(es->s_reserved_gdt_blocks)) : 0; - ext3_fsblk_t metaend = start + overhead; - struct buffer_head *bh = NULL; - ext3_grpblk_t free_blocks_count; - int err = -EINVAL; - - input->free_blocks_count = free_blocks_count = - input->blocks_count - 2 - overhead - sbi->s_itb_per_group; - - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG "EXT3-fs: adding %s group %u: %u blocks " - "(%d free, %u reserved)\n", - ext3_bg_has_super(sb, input->group) ? "normal" : - "no-super", input->group, input->blocks_count, - free_blocks_count, input->reserved_blocks); - - if (group != sbi->s_groups_count) - ext3_warning(sb, __func__, - "Cannot add at group %u (only %lu groups)", - input->group, sbi->s_groups_count); - else if ((start - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb)) - ext3_warning(sb, __func__, "Last group not full"); - else if (input->reserved_blocks > input->blocks_count / 5) - ext3_warning(sb, __func__, "Reserved blocks too high (%u)", - input->reserved_blocks); - else if (free_blocks_count < 0) - ext3_warning(sb, __func__, "Bad blocks count %u", - input->blocks_count); - else if (!(bh = sb_bread(sb, end - 1))) - ext3_warning(sb, __func__, - "Cannot read last block ("E3FSBLK")", - end - 1); - else if (outside(input->block_bitmap, start, end)) - ext3_warning(sb, __func__, - "Block bitmap not in group (block %u)", - input->block_bitmap); - else if (outside(input->inode_bitmap, start, end)) - ext3_warning(sb, __func__, - "Inode bitmap not in group (block %u)", - input->inode_bitmap); - else if (outside(input->inode_table, start, end) || - outside(itend - 1, start, end)) - ext3_warning(sb, __func__, - "Inode table not in group (blocks %u-"E3FSBLK")", - input->inode_table, itend - 1); - else if (input->inode_bitmap == input->block_bitmap) - ext3_warning(sb, __func__, - "Block bitmap same as inode bitmap (%u)", - input->block_bitmap); - else if (inside(input->block_bitmap, input->inode_table, itend)) - ext3_warning(sb, __func__, - "Block bitmap (%u) in inode table (%u-"E3FSBLK")", - input->block_bitmap, input->inode_table, itend-1); - else if (inside(input->inode_bitmap, input->inode_table, itend)) - ext3_warning(sb, __func__, - "Inode bitmap (%u) in inode table (%u-"E3FSBLK")", - input->inode_bitmap, input->inode_table, itend-1); - else if (inside(input->block_bitmap, start, metaend)) - ext3_warning(sb, __func__, - "Block bitmap (%u) in GDT table" - " ("E3FSBLK"-"E3FSBLK")", - input->block_bitmap, start, metaend - 1); - else if (inside(input->inode_bitmap, start, metaend)) - ext3_warning(sb, __func__, - "Inode bitmap (%u) in GDT table" - " ("E3FSBLK"-"E3FSBLK")", - input->inode_bitmap, start, metaend - 1); - else if (inside(input->inode_table, start, metaend) || - inside(itend - 1, start, metaend)) - ext3_warning(sb, __func__, - "Inode table (%u-"E3FSBLK") overlaps" - "GDT table ("E3FSBLK"-"E3FSBLK")", - input->inode_table, itend - 1, start, metaend - 1); - else - err = 0; - brelse(bh); - - return err; -} - -static struct buffer_head *bclean(handle_t *handle, struct super_block *sb, - ext3_fsblk_t blk) -{ - struct buffer_head *bh; - int err; - - bh = sb_getblk(sb, blk); - if (!bh) - return ERR_PTR(-EIO); - if ((err = ext3_journal_get_write_access(handle, bh))) { - brelse(bh); - bh = ERR_PTR(err); - } else { - lock_buffer(bh); - memset(bh->b_data, 0, sb->s_blocksize); - set_buffer_uptodate(bh); - unlock_buffer(bh); - } - - return bh; -} - -/* - * To avoid calling the atomic setbit hundreds or thousands of times, we only - * need to use it within a single byte (to ensure we get endianness right). - * We can use memset for the rest of the bitmap as there are no other users. - */ -static void mark_bitmap_end(int start_bit, int end_bit, char *bitmap) -{ - int i; - - if (start_bit >= end_bit) - return; - - ext3_debug("mark end bits +%d through +%d used\n", start_bit, end_bit); - for (i = start_bit; i < ((start_bit + 7) & ~7UL); i++) - ext3_set_bit(i, bitmap); - if (i < end_bit) - memset(bitmap + (i >> 3), 0xff, (end_bit - i) >> 3); -} - -/* - * If we have fewer than thresh credits, extend by EXT3_MAX_TRANS_DATA. - * If that fails, restart the transaction & regain write access for the - * buffer head which is used for block_bitmap modifications. - */ -static int extend_or_restart_transaction(handle_t *handle, int thresh, - struct buffer_head *bh) -{ - int err; - - if (handle->h_buffer_credits >= thresh) - return 0; - - err = ext3_journal_extend(handle, EXT3_MAX_TRANS_DATA); - if (err < 0) - return err; - if (err) { - err = ext3_journal_restart(handle, EXT3_MAX_TRANS_DATA); - if (err) - return err; - err = ext3_journal_get_write_access(handle, bh); - if (err) - return err; - } - - return 0; -} - -/* - * Set up the block and inode bitmaps, and the inode table for the new group. - * This doesn't need to be part of the main transaction, since we are only - * changing blocks outside the actual filesystem. We still do journaling to - * ensure the recovery is correct in case of a failure just after resize. - * If any part of this fails, we simply abort the resize. - */ -static int setup_new_group_blocks(struct super_block *sb, - struct ext3_new_group_data *input) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - ext3_fsblk_t start = ext3_group_first_block_no(sb, input->group); - int reserved_gdb = ext3_bg_has_super(sb, input->group) ? - le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) : 0; - unsigned long gdblocks = ext3_bg_num_gdb(sb, input->group); - struct buffer_head *bh; - handle_t *handle; - ext3_fsblk_t block; - ext3_grpblk_t bit; - int i; - int err = 0, err2; - - /* This transaction may be extended/restarted along the way */ - handle = ext3_journal_start_sb(sb, EXT3_MAX_TRANS_DATA); - - if (IS_ERR(handle)) - return PTR_ERR(handle); - - mutex_lock(&sbi->s_resize_lock); - if (input->group != sbi->s_groups_count) { - err = -EBUSY; - goto exit_journal; - } - - if (IS_ERR(bh = bclean(handle, sb, input->block_bitmap))) { - err = PTR_ERR(bh); - goto exit_journal; - } - - if (ext3_bg_has_super(sb, input->group)) { - ext3_debug("mark backup superblock %#04lx (+0)\n", start); - ext3_set_bit(0, bh->b_data); - } - - /* Copy all of the GDT blocks into the backup in this group */ - for (i = 0, bit = 1, block = start + 1; - i < gdblocks; i++, block++, bit++) { - struct buffer_head *gdb; - - ext3_debug("update backup group %#04lx (+%d)\n", block, bit); - - err = extend_or_restart_transaction(handle, 1, bh); - if (err) - goto exit_bh; - - gdb = sb_getblk(sb, block); - if (!gdb) { - err = -EIO; - goto exit_bh; - } - if ((err = ext3_journal_get_write_access(handle, gdb))) { - brelse(gdb); - goto exit_bh; - } - lock_buffer(gdb); - memcpy(gdb->b_data, sbi->s_group_desc[i]->b_data, gdb->b_size); - set_buffer_uptodate(gdb); - unlock_buffer(gdb); - err = ext3_journal_dirty_metadata(handle, gdb); - if (err) { - brelse(gdb); - goto exit_bh; - } - ext3_set_bit(bit, bh->b_data); - brelse(gdb); - } - - /* Zero out all of the reserved backup group descriptor table blocks */ - for (i = 0, bit = gdblocks + 1, block = start + bit; - i < reserved_gdb; i++, block++, bit++) { - struct buffer_head *gdb; - - ext3_debug("clear reserved block %#04lx (+%d)\n", block, bit); - - err = extend_or_restart_transaction(handle, 1, bh); - if (err) - goto exit_bh; - - if (IS_ERR(gdb = bclean(handle, sb, block))) { - err = PTR_ERR(gdb); - goto exit_bh; - } - err = ext3_journal_dirty_metadata(handle, gdb); - if (err) { - brelse(gdb); - goto exit_bh; - } - ext3_set_bit(bit, bh->b_data); - brelse(gdb); - } - ext3_debug("mark block bitmap %#04x (+%ld)\n", input->block_bitmap, - input->block_bitmap - start); - ext3_set_bit(input->block_bitmap - start, bh->b_data); - ext3_debug("mark inode bitmap %#04x (+%ld)\n", input->inode_bitmap, - input->inode_bitmap - start); - ext3_set_bit(input->inode_bitmap - start, bh->b_data); - - /* Zero out all of the inode table blocks */ - for (i = 0, block = input->inode_table, bit = block - start; - i < sbi->s_itb_per_group; i++, bit++, block++) { - struct buffer_head *it; - - ext3_debug("clear inode block %#04lx (+%d)\n", block, bit); - - err = extend_or_restart_transaction(handle, 1, bh); - if (err) - goto exit_bh; - - if (IS_ERR(it = bclean(handle, sb, block))) { - err = PTR_ERR(it); - goto exit_bh; - } - err = ext3_journal_dirty_metadata(handle, it); - if (err) { - brelse(it); - goto exit_bh; - } - brelse(it); - ext3_set_bit(bit, bh->b_data); - } - - err = extend_or_restart_transaction(handle, 2, bh); - if (err) - goto exit_bh; - - mark_bitmap_end(input->blocks_count, EXT3_BLOCKS_PER_GROUP(sb), - bh->b_data); - err = ext3_journal_dirty_metadata(handle, bh); - if (err) - goto exit_bh; - brelse(bh); - - /* Mark unused entries in inode bitmap used */ - ext3_debug("clear inode bitmap %#04x (+%ld)\n", - input->inode_bitmap, input->inode_bitmap - start); - if (IS_ERR(bh = bclean(handle, sb, input->inode_bitmap))) { - err = PTR_ERR(bh); - goto exit_journal; - } - - mark_bitmap_end(EXT3_INODES_PER_GROUP(sb), EXT3_BLOCKS_PER_GROUP(sb), - bh->b_data); - err = ext3_journal_dirty_metadata(handle, bh); -exit_bh: - brelse(bh); - -exit_journal: - mutex_unlock(&sbi->s_resize_lock); - if ((err2 = ext3_journal_stop(handle)) && !err) - err = err2; - - return err; -} - -/* - * Iterate through the groups which hold BACKUP superblock/GDT copies in an - * ext3 filesystem. The counters should be initialized to 1, 5, and 7 before - * calling this for the first time. In a sparse filesystem it will be the - * sequence of powers of 3, 5, and 7: 1, 3, 5, 7, 9, 25, 27, 49, 81, ... - * For a non-sparse filesystem it will be every group: 1, 2, 3, 4, ... - */ -static unsigned ext3_list_backups(struct super_block *sb, unsigned *three, - unsigned *five, unsigned *seven) -{ - unsigned *min = three; - int mult = 3; - unsigned ret; - - if (!EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)) { - ret = *min; - *min += 1; - return ret; - } - - if (*five < *min) { - min = five; - mult = 5; - } - if (*seven < *min) { - min = seven; - mult = 7; - } - - ret = *min; - *min *= mult; - - return ret; -} - -/* - * Check that all of the backup GDT blocks are held in the primary GDT block. - * It is assumed that they are stored in group order. Returns the number of - * groups in current filesystem that have BACKUPS, or -ve error code. - */ -static int verify_reserved_gdb(struct super_block *sb, - struct buffer_head *primary) -{ - const ext3_fsblk_t blk = primary->b_blocknr; - const unsigned long end = EXT3_SB(sb)->s_groups_count; - unsigned three = 1; - unsigned five = 5; - unsigned seven = 7; - unsigned grp; - __le32 *p = (__le32 *)primary->b_data; - int gdbackups = 0; - - while ((grp = ext3_list_backups(sb, &three, &five, &seven)) < end) { - if (le32_to_cpu(*p++) != grp * EXT3_BLOCKS_PER_GROUP(sb) + blk){ - ext3_warning(sb, __func__, - "reserved GDT "E3FSBLK - " missing grp %d ("E3FSBLK")", - blk, grp, - grp * EXT3_BLOCKS_PER_GROUP(sb) + blk); - return -EINVAL; - } - if (++gdbackups > EXT3_ADDR_PER_BLOCK(sb)) - return -EFBIG; - } - - return gdbackups; -} - -/* - * Called when we need to bring a reserved group descriptor table block into - * use from the resize inode. The primary copy of the new GDT block currently - * is an indirect block (under the double indirect block in the resize inode). - * The new backup GDT blocks will be stored as leaf blocks in this indirect - * block, in group order. Even though we know all the block numbers we need, - * we check to ensure that the resize inode has actually reserved these blocks. - * - * Don't need to update the block bitmaps because the blocks are still in use. - * - * We get all of the error cases out of the way, so that we are sure to not - * fail once we start modifying the data on disk, because JBD has no rollback. - */ -static int add_new_gdb(handle_t *handle, struct inode *inode, - struct ext3_new_group_data *input, - struct buffer_head **primary) -{ - struct super_block *sb = inode->i_sb; - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - unsigned long gdb_num = input->group / EXT3_DESC_PER_BLOCK(sb); - ext3_fsblk_t gdblock = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + gdb_num; - struct buffer_head **o_group_desc, **n_group_desc; - struct buffer_head *dind; - int gdbackups; - struct ext3_iloc iloc; - __le32 *data; - int err; - - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG - "EXT3-fs: ext3_add_new_gdb: adding group block %lu\n", - gdb_num); - - /* - * If we are not using the primary superblock/GDT copy don't resize, - * because the user tools have no way of handling this. Probably a - * bad time to do it anyways. - */ - if (EXT3_SB(sb)->s_sbh->b_blocknr != - le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block)) { - ext3_warning(sb, __func__, - "won't resize using backup superblock at %llu", - (unsigned long long)EXT3_SB(sb)->s_sbh->b_blocknr); - return -EPERM; - } - - *primary = sb_bread(sb, gdblock); - if (!*primary) - return -EIO; - - if ((gdbackups = verify_reserved_gdb(sb, *primary)) < 0) { - err = gdbackups; - goto exit_bh; - } - - data = EXT3_I(inode)->i_data + EXT3_DIND_BLOCK; - dind = sb_bread(sb, le32_to_cpu(*data)); - if (!dind) { - err = -EIO; - goto exit_bh; - } - - data = (__le32 *)dind->b_data; - if (le32_to_cpu(data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)]) != gdblock) { - ext3_warning(sb, __func__, - "new group %u GDT block "E3FSBLK" not reserved", - input->group, gdblock); - err = -EINVAL; - goto exit_dind; - } - - if ((err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh))) - goto exit_dind; - - if ((err = ext3_journal_get_write_access(handle, *primary))) - goto exit_sbh; - - if ((err = ext3_journal_get_write_access(handle, dind))) - goto exit_primary; - - /* ext3_reserve_inode_write() gets a reference on the iloc */ - if ((err = ext3_reserve_inode_write(handle, inode, &iloc))) - goto exit_dindj; - - n_group_desc = kmalloc((gdb_num + 1) * sizeof(struct buffer_head *), - GFP_NOFS); - if (!n_group_desc) { - err = -ENOMEM; - ext3_warning (sb, __func__, - "not enough memory for %lu groups", gdb_num + 1); - goto exit_inode; - } - - /* - * Finally, we have all of the possible failures behind us... - * - * Remove new GDT block from inode double-indirect block and clear out - * the new GDT block for use (which also "frees" the backup GDT blocks - * from the reserved inode). We don't need to change the bitmaps for - * these blocks, because they are marked as in-use from being in the - * reserved inode, and will become GDT blocks (primary and backup). - */ - data[gdb_num % EXT3_ADDR_PER_BLOCK(sb)] = 0; - err = ext3_journal_dirty_metadata(handle, dind); - if (err) - goto exit_group_desc; - brelse(dind); - dind = NULL; - inode->i_blocks -= (gdbackups + 1) * sb->s_blocksize >> 9; - err = ext3_mark_iloc_dirty(handle, inode, &iloc); - if (err) - goto exit_group_desc; - memset((*primary)->b_data, 0, sb->s_blocksize); - err = ext3_journal_dirty_metadata(handle, *primary); - if (err) - goto exit_group_desc; - - o_group_desc = EXT3_SB(sb)->s_group_desc; - memcpy(n_group_desc, o_group_desc, - EXT3_SB(sb)->s_gdb_count * sizeof(struct buffer_head *)); - n_group_desc[gdb_num] = *primary; - EXT3_SB(sb)->s_group_desc = n_group_desc; - EXT3_SB(sb)->s_gdb_count++; - kfree(o_group_desc); - - le16_add_cpu(&es->s_reserved_gdt_blocks, -1); - err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - if (err) - goto exit_inode; - - return 0; - -exit_group_desc: - kfree(n_group_desc); -exit_inode: - //ext3_journal_release_buffer(handle, iloc.bh); - brelse(iloc.bh); -exit_dindj: - //ext3_journal_release_buffer(handle, dind); -exit_primary: - //ext3_journal_release_buffer(handle, *primary); -exit_sbh: - //ext3_journal_release_buffer(handle, *primary); -exit_dind: - brelse(dind); -exit_bh: - brelse(*primary); - - ext3_debug("leaving with error %d\n", err); - return err; -} - -/* - * Called when we are adding a new group which has a backup copy of each of - * the GDT blocks (i.e. sparse group) and there are reserved GDT blocks. - * We need to add these reserved backup GDT blocks to the resize inode, so - * that they are kept for future resizing and not allocated to files. - * - * Each reserved backup GDT block will go into a different indirect block. - * The indirect blocks are actually the primary reserved GDT blocks, - * so we know in advance what their block numbers are. We only get the - * double-indirect block to verify it is pointing to the primary reserved - * GDT blocks so we don't overwrite a data block by accident. The reserved - * backup GDT blocks are stored in their reserved primary GDT block. - */ -static int reserve_backup_gdb(handle_t *handle, struct inode *inode, - struct ext3_new_group_data *input) -{ - struct super_block *sb = inode->i_sb; - int reserved_gdb =le16_to_cpu(EXT3_SB(sb)->s_es->s_reserved_gdt_blocks); - struct buffer_head **primary; - struct buffer_head *dind; - struct ext3_iloc iloc; - ext3_fsblk_t blk; - __le32 *data, *end; - int gdbackups = 0; - int res, i; - int err; - - primary = kmalloc(reserved_gdb * sizeof(*primary), GFP_NOFS); - if (!primary) - return -ENOMEM; - - data = EXT3_I(inode)->i_data + EXT3_DIND_BLOCK; - dind = sb_bread(sb, le32_to_cpu(*data)); - if (!dind) { - err = -EIO; - goto exit_free; - } - - blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count; - data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count % - EXT3_ADDR_PER_BLOCK(sb)); - end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb); - - /* Get each reserved primary GDT block and verify it holds backups */ - for (res = 0; res < reserved_gdb; res++, blk++) { - if (le32_to_cpu(*data) != blk) { - ext3_warning(sb, __func__, - "reserved block "E3FSBLK - " not at offset %ld", - blk, - (long)(data - (__le32 *)dind->b_data)); - err = -EINVAL; - goto exit_bh; - } - primary[res] = sb_bread(sb, blk); - if (!primary[res]) { - err = -EIO; - goto exit_bh; - } - if ((gdbackups = verify_reserved_gdb(sb, primary[res])) < 0) { - brelse(primary[res]); - err = gdbackups; - goto exit_bh; - } - if (++data >= end) - data = (__le32 *)dind->b_data; - } - - for (i = 0; i < reserved_gdb; i++) { - if ((err = ext3_journal_get_write_access(handle, primary[i]))) { - /* - int j; - for (j = 0; j < i; j++) - ext3_journal_release_buffer(handle, primary[j]); - */ - goto exit_bh; - } - } - - if ((err = ext3_reserve_inode_write(handle, inode, &iloc))) - goto exit_bh; - - /* - * Finally we can add each of the reserved backup GDT blocks from - * the new group to its reserved primary GDT block. - */ - blk = input->group * EXT3_BLOCKS_PER_GROUP(sb); - for (i = 0; i < reserved_gdb; i++) { - int err2; - data = (__le32 *)primary[i]->b_data; - /* printk("reserving backup %lu[%u] = %lu\n", - primary[i]->b_blocknr, gdbackups, - blk + primary[i]->b_blocknr); */ - data[gdbackups] = cpu_to_le32(blk + primary[i]->b_blocknr); - err2 = ext3_journal_dirty_metadata(handle, primary[i]); - if (!err) - err = err2; - } - inode->i_blocks += reserved_gdb * sb->s_blocksize >> 9; - ext3_mark_iloc_dirty(handle, inode, &iloc); - -exit_bh: - while (--res >= 0) - brelse(primary[res]); - brelse(dind); - -exit_free: - kfree(primary); - - return err; -} - -/* - * Update the backup copies of the ext3 metadata. These don't need to be part - * of the main resize transaction, because e2fsck will re-write them if there - * is a problem (basically only OOM will cause a problem). However, we - * _should_ update the backups if possible, in case the primary gets trashed - * for some reason and we need to run e2fsck from a backup superblock. The - * important part is that the new block and inode counts are in the backup - * superblocks, and the location of the new group metadata in the GDT backups. - * - * We do not need take the s_resize_lock for this, because these - * blocks are not otherwise touched by the filesystem code when it is - * mounted. We don't need to worry about last changing from - * sbi->s_groups_count, because the worst that can happen is that we - * do not copy the full number of backups at this time. The resize - * which changed s_groups_count will backup again. - */ -static void update_backups(struct super_block *sb, - int blk_off, char *data, int size) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - const unsigned long last = sbi->s_groups_count; - const int bpg = EXT3_BLOCKS_PER_GROUP(sb); - unsigned three = 1; - unsigned five = 5; - unsigned seven = 7; - unsigned group; - int rest = sb->s_blocksize - size; - handle_t *handle; - int err = 0, err2; - - handle = ext3_journal_start_sb(sb, EXT3_MAX_TRANS_DATA); - if (IS_ERR(handle)) { - group = 1; - err = PTR_ERR(handle); - goto exit_err; - } - - while ((group = ext3_list_backups(sb, &three, &five, &seven)) < last) { - struct buffer_head *bh; - - /* Out of journal space, and can't get more - abort - so sad */ - if (handle->h_buffer_credits == 0 && - ext3_journal_extend(handle, EXT3_MAX_TRANS_DATA) && - (err = ext3_journal_restart(handle, EXT3_MAX_TRANS_DATA))) - break; - - bh = sb_getblk(sb, group * bpg + blk_off); - if (!bh) { - err = -EIO; - break; - } - ext3_debug("update metadata backup %#04lx\n", - (unsigned long)bh->b_blocknr); - if ((err = ext3_journal_get_write_access(handle, bh))) { - brelse(bh); - break; - } - lock_buffer(bh); - memcpy(bh->b_data, data, size); - if (rest) - memset(bh->b_data + size, 0, rest); - set_buffer_uptodate(bh); - unlock_buffer(bh); - err = ext3_journal_dirty_metadata(handle, bh); - brelse(bh); - if (err) - break; - } - if ((err2 = ext3_journal_stop(handle)) && !err) - err = err2; - - /* - * Ugh! Need to have e2fsck write the backup copies. It is too - * late to revert the resize, we shouldn't fail just because of - * the backup copies (they are only needed in case of corruption). - * - * However, if we got here we have a journal problem too, so we - * can't really start a transaction to mark the superblock. - * Chicken out and just set the flag on the hope it will be written - * to disk, and if not - we will simply wait until next fsck. - */ -exit_err: - if (err) { - ext3_warning(sb, __func__, - "can't update backup for group %d (err %d), " - "forcing fsck on next reboot", group, err); - sbi->s_mount_state &= ~EXT3_VALID_FS; - sbi->s_es->s_state &= cpu_to_le16(~EXT3_VALID_FS); - mark_buffer_dirty(sbi->s_sbh); - } -} - -/* Add group descriptor data to an existing or new group descriptor block. - * Ensure we handle all possible error conditions _before_ we start modifying - * the filesystem, because we cannot abort the transaction and not have it - * write the data to disk. - * - * If we are on a GDT block boundary, we need to get the reserved GDT block. - * Otherwise, we may need to add backup GDT blocks for a sparse group. - * - * We only need to hold the superblock lock while we are actually adding - * in the new group's counts to the superblock. Prior to that we have - * not really "added" the group at all. We re-check that we are still - * adding in the last group in case things have changed since verifying. - */ -int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - int reserved_gdb = ext3_bg_has_super(sb, input->group) ? - le16_to_cpu(es->s_reserved_gdt_blocks) : 0; - struct buffer_head *primary = NULL; - struct ext3_group_desc *gdp; - struct inode *inode = NULL; - handle_t *handle; - int gdb_off, gdb_num; - int err, err2; - - gdb_num = input->group / EXT3_DESC_PER_BLOCK(sb); - gdb_off = input->group % EXT3_DESC_PER_BLOCK(sb); - - if (gdb_off == 0 && !EXT3_HAS_RO_COMPAT_FEATURE(sb, - EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)) { - ext3_warning(sb, __func__, - "Can't resize non-sparse filesystem further"); - return -EPERM; - } - - if (le32_to_cpu(es->s_blocks_count) + input->blocks_count < - le32_to_cpu(es->s_blocks_count)) { - ext3_warning(sb, __func__, "blocks_count overflow\n"); - return -EINVAL; - } - - if (le32_to_cpu(es->s_inodes_count) + EXT3_INODES_PER_GROUP(sb) < - le32_to_cpu(es->s_inodes_count)) { - ext3_warning(sb, __func__, "inodes_count overflow\n"); - return -EINVAL; - } - - if (reserved_gdb || gdb_off == 0) { - if (!EXT3_HAS_COMPAT_FEATURE(sb, - EXT3_FEATURE_COMPAT_RESIZE_INODE) - || !le16_to_cpu(es->s_reserved_gdt_blocks)) { - ext3_warning(sb, __func__, - "No reserved GDT blocks, can't resize"); - return -EPERM; - } - inode = ext3_iget(sb, EXT3_RESIZE_INO); - if (IS_ERR(inode)) { - ext3_warning(sb, __func__, - "Error opening resize inode"); - return PTR_ERR(inode); - } - } - - if ((err = verify_group_input(sb, input))) - goto exit_put; - - if ((err = setup_new_group_blocks(sb, input))) - goto exit_put; - - /* - * We will always be modifying at least the superblock and a GDT - * block. If we are adding a group past the last current GDT block, - * we will also modify the inode and the dindirect block. If we - * are adding a group with superblock/GDT backups we will also - * modify each of the reserved GDT dindirect blocks. - */ - handle = ext3_journal_start_sb(sb, - ext3_bg_has_super(sb, input->group) ? - 3 + reserved_gdb : 4); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - goto exit_put; - } - - mutex_lock(&sbi->s_resize_lock); - if (input->group != sbi->s_groups_count) { - ext3_warning(sb, __func__, - "multiple resizers run on filesystem!"); - err = -EBUSY; - goto exit_journal; - } - - if ((err = ext3_journal_get_write_access(handle, sbi->s_sbh))) - goto exit_journal; - - /* - * We will only either add reserved group blocks to a backup group - * or remove reserved blocks for the first group in a new group block. - * Doing both would be mean more complex code, and sane people don't - * use non-sparse filesystems anymore. This is already checked above. - */ - if (gdb_off) { - primary = sbi->s_group_desc[gdb_num]; - if ((err = ext3_journal_get_write_access(handle, primary))) - goto exit_journal; - - if (reserved_gdb && ext3_bg_num_gdb(sb, input->group) && - (err = reserve_backup_gdb(handle, inode, input))) - goto exit_journal; - } else if ((err = add_new_gdb(handle, inode, input, &primary))) - goto exit_journal; - - /* - * OK, now we've set up the new group. Time to make it active. - * - * We do not lock all allocations via s_resize_lock - * so we have to be safe wrt. concurrent accesses the group - * data. So we need to be careful to set all of the relevant - * group descriptor data etc. *before* we enable the group. - * - * The key field here is sbi->s_groups_count: as long as - * that retains its old value, nobody is going to access the new - * group. - * - * So first we update all the descriptor metadata for the new - * group; then we update the total disk blocks count; then we - * update the groups count to enable the group; then finally we - * update the free space counts so that the system can start - * using the new disk blocks. - */ - - /* Update group descriptor block for new group */ - gdp = (struct ext3_group_desc *)primary->b_data + gdb_off; - - gdp->bg_block_bitmap = cpu_to_le32(input->block_bitmap); - gdp->bg_inode_bitmap = cpu_to_le32(input->inode_bitmap); - gdp->bg_inode_table = cpu_to_le32(input->inode_table); - gdp->bg_free_blocks_count = cpu_to_le16(input->free_blocks_count); - gdp->bg_free_inodes_count = cpu_to_le16(EXT3_INODES_PER_GROUP(sb)); - - /* - * Make the new blocks and inodes valid next. We do this before - * increasing the group count so that once the group is enabled, - * all of its blocks and inodes are already valid. - * - * We always allocate group-by-group, then block-by-block or - * inode-by-inode within a group, so enabling these - * blocks/inodes before the group is live won't actually let us - * allocate the new space yet. - */ - le32_add_cpu(&es->s_blocks_count, input->blocks_count); - le32_add_cpu(&es->s_inodes_count, EXT3_INODES_PER_GROUP(sb)); - - /* - * We need to protect s_groups_count against other CPUs seeing - * inconsistent state in the superblock. - * - * The precise rules we use are: - * - * * Writers of s_groups_count *must* hold s_resize_lock - * AND - * * Writers must perform a smp_wmb() after updating all dependent - * data and before modifying the groups count - * - * * Readers must hold s_resize_lock over the access - * OR - * * Readers must perform an smp_rmb() after reading the groups count - * and before reading any dependent data. - * - * NB. These rules can be relaxed when checking the group count - * while freeing data, as we can only allocate from a block - * group after serialising against the group count, and we can - * only then free after serialising in turn against that - * allocation. - */ - smp_wmb(); - - /* Update the global fs size fields */ - sbi->s_groups_count++; - - err = ext3_journal_dirty_metadata(handle, primary); - if (err) - goto exit_journal; - - /* Update the reserved block counts only once the new group is - * active. */ - le32_add_cpu(&es->s_r_blocks_count, input->reserved_blocks); - - /* Update the free space counts */ - percpu_counter_add(&sbi->s_freeblocks_counter, - input->free_blocks_count); - percpu_counter_add(&sbi->s_freeinodes_counter, - EXT3_INODES_PER_GROUP(sb)); - - err = ext3_journal_dirty_metadata(handle, sbi->s_sbh); - -exit_journal: - mutex_unlock(&sbi->s_resize_lock); - if ((err2 = ext3_journal_stop(handle)) && !err) - err = err2; - if (!err) { - update_backups(sb, sbi->s_sbh->b_blocknr, (char *)es, - sizeof(struct ext3_super_block)); - update_backups(sb, primary->b_blocknr, primary->b_data, - primary->b_size); - } -exit_put: - iput(inode); - return err; -} /* ext3_group_add */ - -/* Extend the filesystem to the new number of blocks specified. This entry - * point is only used to extend the current filesystem to the end of the last - * existing group. It can be accessed via ioctl, or by "remount,resize=<size>" - * for emergencies (because it has no dependencies on reserved blocks). - * - * If we _really_ wanted, we could use default values to call ext3_group_add() - * allow the "remount" trick to work for arbitrary resizing, assuming enough - * GDT blocks are reserved to grow to the desired size. - */ -int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es, - ext3_fsblk_t n_blocks_count) -{ - ext3_fsblk_t o_blocks_count; - ext3_grpblk_t last; - ext3_grpblk_t add; - struct buffer_head * bh; - handle_t *handle; - int err; - unsigned long freed_blocks; - - /* We don't need to worry about locking wrt other resizers just - * yet: we're going to revalidate es->s_blocks_count after - * taking the s_resize_lock below. */ - o_blocks_count = le32_to_cpu(es->s_blocks_count); - - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK - " up to "E3FSBLK" blocks\n", - o_blocks_count, n_blocks_count); - - if (n_blocks_count == 0 || n_blocks_count == o_blocks_count) - return 0; - - if (n_blocks_count > (sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) { - printk(KERN_ERR "EXT3-fs: filesystem on %s:" - " too large to resize to "E3FSBLK" blocks safely\n", - sb->s_id, n_blocks_count); - if (sizeof(sector_t) < 8) - ext3_warning(sb, __func__, - "CONFIG_LBDAF not enabled\n"); - return -EINVAL; - } - - if (n_blocks_count < o_blocks_count) { - ext3_warning(sb, __func__, - "can't shrink FS - resize aborted"); - return -EBUSY; - } - - /* Handle the remaining blocks in the last group only. */ - last = (o_blocks_count - le32_to_cpu(es->s_first_data_block)) % - EXT3_BLOCKS_PER_GROUP(sb); - - if (last == 0) { - ext3_warning(sb, __func__, - "need to use ext2online to resize further"); - return -EPERM; - } - - add = EXT3_BLOCKS_PER_GROUP(sb) - last; - - if (o_blocks_count + add < o_blocks_count) { - ext3_warning(sb, __func__, "blocks_count overflow"); - return -EINVAL; - } - - if (o_blocks_count + add > n_blocks_count) - add = n_blocks_count - o_blocks_count; - - if (o_blocks_count + add < n_blocks_count) - ext3_warning(sb, __func__, - "will only finish group ("E3FSBLK - " blocks, %u new)", - o_blocks_count + add, add); - - /* See if the device is actually as big as what was requested */ - bh = sb_bread(sb, o_blocks_count + add -1); - if (!bh) { - ext3_warning(sb, __func__, - "can't read last block, resize aborted"); - return -ENOSPC; - } - brelse(bh); - - /* We will update the superblock, one block bitmap, and - * one group descriptor via ext3_free_blocks(). - */ - handle = ext3_journal_start_sb(sb, 3); - if (IS_ERR(handle)) { - err = PTR_ERR(handle); - ext3_warning(sb, __func__, "error %d on journal start",err); - goto exit_put; - } - - mutex_lock(&EXT3_SB(sb)->s_resize_lock); - if (o_blocks_count != le32_to_cpu(es->s_blocks_count)) { - ext3_warning(sb, __func__, - "multiple resizers run on filesystem!"); - mutex_unlock(&EXT3_SB(sb)->s_resize_lock); - ext3_journal_stop(handle); - err = -EBUSY; - goto exit_put; - } - - if ((err = ext3_journal_get_write_access(handle, - EXT3_SB(sb)->s_sbh))) { - ext3_warning(sb, __func__, - "error %d on journal write access", err); - mutex_unlock(&EXT3_SB(sb)->s_resize_lock); - ext3_journal_stop(handle); - goto exit_put; - } - es->s_blocks_count = cpu_to_le32(o_blocks_count + add); - err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - mutex_unlock(&EXT3_SB(sb)->s_resize_lock); - if (err) { - ext3_warning(sb, __func__, - "error %d on journal dirty metadata", err); - ext3_journal_stop(handle); - goto exit_put; - } - ext3_debug("freeing blocks "E3FSBLK" through "E3FSBLK"\n", - o_blocks_count, o_blocks_count + add); - ext3_free_blocks_sb(handle, sb, o_blocks_count, add, &freed_blocks); - ext3_debug("freed blocks "E3FSBLK" through "E3FSBLK"\n", - o_blocks_count, o_blocks_count + add); - if ((err = ext3_journal_stop(handle))) - goto exit_put; - if (test_opt(sb, DEBUG)) - printk(KERN_DEBUG "EXT3-fs: extended group to %u blocks\n", - le32_to_cpu(es->s_blocks_count)); - update_backups(sb, EXT3_SB(sb)->s_sbh->b_blocknr, (char *)es, - sizeof(struct ext3_super_block)); -exit_put: - return err; -} /* ext3_group_extend */ diff --git a/ANDROID_3.4.5/fs/ext3/super.c b/ANDROID_3.4.5/fs/ext3/super.c deleted file mode 100644 index cf0b5921..00000000 --- a/ANDROID_3.4.5/fs/ext3/super.c +++ /dev/null @@ -1,3088 +0,0 @@ -/* - * linux/fs/ext3/super.c - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/inode.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Big-endian to little-endian byte-swapping/bitmaps by - * David S. Miller (davem@caip.rutgers.edu), 1995 - */ - -#include <linux/module.h> -#include <linux/blkdev.h> -#include <linux/parser.h> -#include <linux/exportfs.h> -#include <linux/statfs.h> -#include <linux/random.h> -#include <linux/mount.h> -#include <linux/quotaops.h> -#include <linux/seq_file.h> -#include <linux/log2.h> -#include <linux/cleancache.h> - -#include <asm/uaccess.h> - -#define CREATE_TRACE_POINTS - -#include "ext3.h" -#include "xattr.h" -#include "acl.h" -#include "namei.h" - -#ifdef CONFIG_EXT3_DEFAULTS_TO_ORDERED - #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_ORDERED_DATA -#else - #define EXT3_MOUNT_DEFAULT_DATA_MODE EXT3_MOUNT_WRITEBACK_DATA -#endif - -static int ext3_load_journal(struct super_block *, struct ext3_super_block *, - unsigned long journal_devnum); -static int ext3_create_journal(struct super_block *, struct ext3_super_block *, - unsigned int); -static int ext3_commit_super(struct super_block *sb, - struct ext3_super_block *es, - int sync); -static void ext3_mark_recovery_complete(struct super_block * sb, - struct ext3_super_block * es); -static void ext3_clear_journal_err(struct super_block * sb, - struct ext3_super_block * es); -static int ext3_sync_fs(struct super_block *sb, int wait); -static const char *ext3_decode_error(struct super_block * sb, int errno, - char nbuf[16]); -static int ext3_remount (struct super_block * sb, int * flags, char * data); -static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf); -static int ext3_unfreeze(struct super_block *sb); -static int ext3_freeze(struct super_block *sb); - -/* - * Wrappers for journal_start/end. - * - * The only special thing we need to do here is to make sure that all - * journal_end calls result in the superblock being marked dirty, so - * that sync() will call the filesystem's write_super callback if - * appropriate. - */ -handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) -{ - journal_t *journal; - - if (sb->s_flags & MS_RDONLY) - return ERR_PTR(-EROFS); - - /* Special case here: if the journal has aborted behind our - * backs (eg. EIO in the commit thread), then we still need to - * take the FS itself readonly cleanly. */ - journal = EXT3_SB(sb)->s_journal; - if (is_journal_aborted(journal)) { - ext3_abort(sb, __func__, - "Detected aborted journal"); - return ERR_PTR(-EROFS); - } - - return journal_start(journal, nblocks); -} - -/* - * The only special thing we need to do here is to make sure that all - * journal_stop calls result in the superblock being marked dirty, so - * that sync() will call the filesystem's write_super callback if - * appropriate. - */ -int __ext3_journal_stop(const char *where, handle_t *handle) -{ - struct super_block *sb; - int err; - int rc; - - sb = handle->h_transaction->t_journal->j_private; - err = handle->h_err; - rc = journal_stop(handle); - - if (!err) - err = rc; - if (err) - __ext3_std_error(sb, where, err); - return err; -} - -void ext3_journal_abort_handle(const char *caller, const char *err_fn, - struct buffer_head *bh, handle_t *handle, int err) -{ - char nbuf[16]; - const char *errstr = ext3_decode_error(NULL, err, nbuf); - - if (bh) - BUFFER_TRACE(bh, "abort"); - - if (!handle->h_err) - handle->h_err = err; - - if (is_handle_aborted(handle)) - return; - - printk(KERN_ERR "EXT3-fs: %s: aborting transaction: %s in %s\n", - caller, errstr, err_fn); - - journal_abort_handle(handle); -} - -void ext3_msg(struct super_block *sb, const char *prefix, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk("%sEXT3-fs (%s): %pV\n", prefix, sb->s_id, &vaf); - - va_end(args); -} - -/* Deal with the reporting of failure conditions on a filesystem such as - * inconsistencies detected or read IO failures. - * - * On ext2, we can store the error state of the filesystem in the - * superblock. That is not possible on ext3, because we may have other - * write ordering constraints on the superblock which prevent us from - * writing it out straight away; and given that the journal is about to - * be aborted, we can't rely on the current, or future, transactions to - * write out the superblock safely. - * - * We'll just use the journal_abort() error code to record an error in - * the journal instead. On recovery, the journal will complain about - * that error until we've noted it down and cleared it. - */ - -static void ext3_handle_error(struct super_block *sb) -{ - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - - EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; - es->s_state |= cpu_to_le16(EXT3_ERROR_FS); - - if (sb->s_flags & MS_RDONLY) - return; - - if (!test_opt (sb, ERRORS_CONT)) { - journal_t *journal = EXT3_SB(sb)->s_journal; - - set_opt(EXT3_SB(sb)->s_mount_opt, ABORT); - if (journal) - journal_abort(journal, -EIO); - } - if (test_opt (sb, ERRORS_RO)) { - ext3_msg(sb, KERN_CRIT, - "error: remounting filesystem read-only"); - sb->s_flags |= MS_RDONLY; - } - ext3_commit_super(sb, es, 1); - if (test_opt(sb, ERRORS_PANIC)) - panic("EXT3-fs (%s): panic forced after error\n", - sb->s_id); -} - -void ext3_error(struct super_block *sb, const char *function, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk(KERN_CRIT "EXT3-fs error (device %s): %s: %pV\n", - sb->s_id, function, &vaf); - - va_end(args); - - ext3_handle_error(sb); -} - -static const char *ext3_decode_error(struct super_block * sb, int errno, - char nbuf[16]) -{ - char *errstr = NULL; - - switch (errno) { - case -EIO: - errstr = "IO failure"; - break; - case -ENOMEM: - errstr = "Out of memory"; - break; - case -EROFS: - if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT) - errstr = "Journal has aborted"; - else - errstr = "Readonly filesystem"; - break; - default: - /* If the caller passed in an extra buffer for unknown - * errors, textualise them now. Else we just return - * NULL. */ - if (nbuf) { - /* Check for truncated error codes... */ - if (snprintf(nbuf, 16, "error %d", -errno) >= 0) - errstr = nbuf; - } - break; - } - - return errstr; -} - -/* __ext3_std_error decodes expected errors from journaling functions - * automatically and invokes the appropriate error response. */ - -void __ext3_std_error (struct super_block * sb, const char * function, - int errno) -{ - char nbuf[16]; - const char *errstr; - - /* Special case: if the error is EROFS, and we're not already - * inside a transaction, then there's really no point in logging - * an error. */ - if (errno == -EROFS && journal_current_handle() == NULL && - (sb->s_flags & MS_RDONLY)) - return; - - errstr = ext3_decode_error(sb, errno, nbuf); - ext3_msg(sb, KERN_CRIT, "error in %s: %s", function, errstr); - - ext3_handle_error(sb); -} - -/* - * ext3_abort is a much stronger failure handler than ext3_error. The - * abort function may be used to deal with unrecoverable failures such - * as journal IO errors or ENOMEM at a critical moment in log management. - * - * We unconditionally force the filesystem into an ABORT|READONLY state, - * unless the error response on the fs has been set to panic in which - * case we take the easy way out and panic immediately. - */ - -void ext3_abort(struct super_block *sb, const char *function, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk(KERN_CRIT "EXT3-fs (%s): error: %s: %pV\n", - sb->s_id, function, &vaf); - - va_end(args); - - if (test_opt(sb, ERRORS_PANIC)) - panic("EXT3-fs: panic from previous error\n"); - - if (sb->s_flags & MS_RDONLY) - return; - - ext3_msg(sb, KERN_CRIT, - "error: remounting filesystem read-only"); - EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; - sb->s_flags |= MS_RDONLY; - set_opt(EXT3_SB(sb)->s_mount_opt, ABORT); - if (EXT3_SB(sb)->s_journal) - journal_abort(EXT3_SB(sb)->s_journal, -EIO); -} - -void ext3_warning(struct super_block *sb, const char *function, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - - printk(KERN_WARNING "EXT3-fs (%s): warning: %s: %pV\n", - sb->s_id, function, &vaf); - - va_end(args); -} - -void ext3_update_dynamic_rev(struct super_block *sb) -{ - struct ext3_super_block *es = EXT3_SB(sb)->s_es; - - if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV) - return; - - ext3_msg(sb, KERN_WARNING, - "warning: updating to rev %d because of " - "new feature flag, running e2fsck is recommended", - EXT3_DYNAMIC_REV); - - es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO); - es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE); - es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV); - /* leave es->s_feature_*compat flags alone */ - /* es->s_uuid will be set by e2fsck if empty */ - - /* - * The rest of the superblock fields should be zero, and if not it - * means they are likely already in use, so leave them alone. We - * can leave it up to e2fsck to clean up any inconsistencies there. - */ -} - -/* - * Open the external journal device - */ -static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb) -{ - struct block_device *bdev; - char b[BDEVNAME_SIZE]; - - bdev = blkdev_get_by_dev(dev, FMODE_READ|FMODE_WRITE|FMODE_EXCL, sb); - if (IS_ERR(bdev)) - goto fail; - return bdev; - -fail: - ext3_msg(sb, "error: failed to open journal device %s: %ld", - __bdevname(dev, b), PTR_ERR(bdev)); - - return NULL; -} - -/* - * Release the journal device - */ -static int ext3_blkdev_put(struct block_device *bdev) -{ - return blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL); -} - -static int ext3_blkdev_remove(struct ext3_sb_info *sbi) -{ - struct block_device *bdev; - int ret = -ENODEV; - - bdev = sbi->journal_bdev; - if (bdev) { - ret = ext3_blkdev_put(bdev); - sbi->journal_bdev = NULL; - } - return ret; -} - -static inline struct inode *orphan_list_entry(struct list_head *l) -{ - return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode; -} - -static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi) -{ - struct list_head *l; - - ext3_msg(sb, KERN_ERR, "error: sb orphan head is %d", - le32_to_cpu(sbi->s_es->s_last_orphan)); - - ext3_msg(sb, KERN_ERR, "sb_info orphan list:"); - list_for_each(l, &sbi->s_orphan) { - struct inode *inode = orphan_list_entry(l); - ext3_msg(sb, KERN_ERR, " " - "inode %s:%lu at %p: mode %o, nlink %d, next %d\n", - inode->i_sb->s_id, inode->i_ino, inode, - inode->i_mode, inode->i_nlink, - NEXT_ORPHAN(inode)); - } -} - -static void ext3_put_super (struct super_block * sb) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - int i, err; - - dquot_disable(sb, -1, DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED); - ext3_xattr_put_super(sb); - err = journal_destroy(sbi->s_journal); - sbi->s_journal = NULL; - if (err < 0) - ext3_abort(sb, __func__, "Couldn't clean up the journal"); - - if (!(sb->s_flags & MS_RDONLY)) { - EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - es->s_state = cpu_to_le16(sbi->s_mount_state); - BUFFER_TRACE(sbi->s_sbh, "marking dirty"); - mark_buffer_dirty(sbi->s_sbh); - ext3_commit_super(sb, es, 1); - } - - for (i = 0; i < sbi->s_gdb_count; i++) - brelse(sbi->s_group_desc[i]); - kfree(sbi->s_group_desc); - percpu_counter_destroy(&sbi->s_freeblocks_counter); - percpu_counter_destroy(&sbi->s_freeinodes_counter); - percpu_counter_destroy(&sbi->s_dirs_counter); - brelse(sbi->s_sbh); -#ifdef CONFIG_QUOTA - for (i = 0; i < MAXQUOTAS; i++) - kfree(sbi->s_qf_names[i]); -#endif - - /* Debugging code just in case the in-memory inode orphan list - * isn't empty. The on-disk one can be non-empty if we've - * detected an error and taken the fs readonly, but the - * in-memory list had better be clean by this point. */ - if (!list_empty(&sbi->s_orphan)) - dump_orphan_list(sb, sbi); - J_ASSERT(list_empty(&sbi->s_orphan)); - - invalidate_bdev(sb->s_bdev); - if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) { - /* - * Invalidate the journal device's buffers. We don't want them - * floating about in memory - the physical journal device may - * hotswapped, and it breaks the `ro-after' testing code. - */ - sync_blockdev(sbi->journal_bdev); - invalidate_bdev(sbi->journal_bdev); - ext3_blkdev_remove(sbi); - } - sb->s_fs_info = NULL; - kfree(sbi->s_blockgroup_lock); - kfree(sbi); -} - -static struct kmem_cache *ext3_inode_cachep; - -/* - * Called inside transaction, so use GFP_NOFS - */ -static struct inode *ext3_alloc_inode(struct super_block *sb) -{ - struct ext3_inode_info *ei; - - ei = kmem_cache_alloc(ext3_inode_cachep, GFP_NOFS); - if (!ei) - return NULL; - ei->i_block_alloc_info = NULL; - ei->vfs_inode.i_version = 1; - atomic_set(&ei->i_datasync_tid, 0); - atomic_set(&ei->i_sync_tid, 0); - return &ei->vfs_inode; -} - -static int ext3_drop_inode(struct inode *inode) -{ - int drop = generic_drop_inode(inode); - - trace_ext3_drop_inode(inode, drop); - return drop; -} - -static void ext3_i_callback(struct rcu_head *head) -{ - struct inode *inode = container_of(head, struct inode, i_rcu); - kmem_cache_free(ext3_inode_cachep, EXT3_I(inode)); -} - -static void ext3_destroy_inode(struct inode *inode) -{ - if (!list_empty(&(EXT3_I(inode)->i_orphan))) { - printk("EXT3 Inode %p: orphan list check failed!\n", - EXT3_I(inode)); - print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4, - EXT3_I(inode), sizeof(struct ext3_inode_info), - false); - dump_stack(); - } - call_rcu(&inode->i_rcu, ext3_i_callback); -} - -static void init_once(void *foo) -{ - struct ext3_inode_info *ei = (struct ext3_inode_info *) foo; - - INIT_LIST_HEAD(&ei->i_orphan); -#ifdef CONFIG_EXT3_FS_XATTR - init_rwsem(&ei->xattr_sem); -#endif - mutex_init(&ei->truncate_mutex); - inode_init_once(&ei->vfs_inode); -} - -static int init_inodecache(void) -{ - ext3_inode_cachep = kmem_cache_create("ext3_inode_cache", - sizeof(struct ext3_inode_info), - 0, (SLAB_RECLAIM_ACCOUNT| - SLAB_MEM_SPREAD), - init_once); - if (ext3_inode_cachep == NULL) - return -ENOMEM; - return 0; -} - -static void destroy_inodecache(void) -{ - kmem_cache_destroy(ext3_inode_cachep); -} - -static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb) -{ -#if defined(CONFIG_QUOTA) - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (sbi->s_jquota_fmt) { - char *fmtname = ""; - - switch (sbi->s_jquota_fmt) { - case QFMT_VFS_OLD: - fmtname = "vfsold"; - break; - case QFMT_VFS_V0: - fmtname = "vfsv0"; - break; - case QFMT_VFS_V1: - fmtname = "vfsv1"; - break; - } - seq_printf(seq, ",jqfmt=%s", fmtname); - } - - if (sbi->s_qf_names[USRQUOTA]) - seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]); - - if (sbi->s_qf_names[GRPQUOTA]) - seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]); - - if (test_opt(sb, USRQUOTA)) - seq_puts(seq, ",usrquota"); - - if (test_opt(sb, GRPQUOTA)) - seq_puts(seq, ",grpquota"); -#endif -} - -static char *data_mode_string(unsigned long mode) -{ - switch (mode) { - case EXT3_MOUNT_JOURNAL_DATA: - return "journal"; - case EXT3_MOUNT_ORDERED_DATA: - return "ordered"; - case EXT3_MOUNT_WRITEBACK_DATA: - return "writeback"; - } - return "unknown"; -} - -/* - * Show an option if - * - it's set to a non-default value OR - * - if the per-sb default is different from the global default - */ -static int ext3_show_options(struct seq_file *seq, struct dentry *root) -{ - struct super_block *sb = root->d_sb; - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - unsigned long def_mount_opts; - - def_mount_opts = le32_to_cpu(es->s_default_mount_opts); - - if (sbi->s_sb_block != 1) - seq_printf(seq, ",sb=%lu", sbi->s_sb_block); - if (test_opt(sb, MINIX_DF)) - seq_puts(seq, ",minixdf"); - if (test_opt(sb, GRPID)) - seq_puts(seq, ",grpid"); - if (!test_opt(sb, GRPID) && (def_mount_opts & EXT3_DEFM_BSDGROUPS)) - seq_puts(seq, ",nogrpid"); - if (sbi->s_resuid != EXT3_DEF_RESUID || - le16_to_cpu(es->s_def_resuid) != EXT3_DEF_RESUID) { - seq_printf(seq, ",resuid=%u", sbi->s_resuid); - } - if (sbi->s_resgid != EXT3_DEF_RESGID || - le16_to_cpu(es->s_def_resgid) != EXT3_DEF_RESGID) { - seq_printf(seq, ",resgid=%u", sbi->s_resgid); - } - if (test_opt(sb, ERRORS_RO)) { - int def_errors = le16_to_cpu(es->s_errors); - - if (def_errors == EXT3_ERRORS_PANIC || - def_errors == EXT3_ERRORS_CONTINUE) { - seq_puts(seq, ",errors=remount-ro"); - } - } - if (test_opt(sb, ERRORS_CONT)) - seq_puts(seq, ",errors=continue"); - if (test_opt(sb, ERRORS_PANIC)) - seq_puts(seq, ",errors=panic"); - if (test_opt(sb, NO_UID32)) - seq_puts(seq, ",nouid32"); - if (test_opt(sb, DEBUG)) - seq_puts(seq, ",debug"); -#ifdef CONFIG_EXT3_FS_XATTR - if (test_opt(sb, XATTR_USER)) - seq_puts(seq, ",user_xattr"); - if (!test_opt(sb, XATTR_USER) && - (def_mount_opts & EXT3_DEFM_XATTR_USER)) { - seq_puts(seq, ",nouser_xattr"); - } -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - if (test_opt(sb, POSIX_ACL)) - seq_puts(seq, ",acl"); - if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT3_DEFM_ACL)) - seq_puts(seq, ",noacl"); -#endif - if (!test_opt(sb, RESERVATION)) - seq_puts(seq, ",noreservation"); - if (sbi->s_commit_interval) { - seq_printf(seq, ",commit=%u", - (unsigned) (sbi->s_commit_interval / HZ)); - } - - /* - * Always display barrier state so it's clear what the status is. - */ - seq_puts(seq, ",barrier="); - seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0"); - seq_printf(seq, ",data=%s", data_mode_string(test_opt(sb, DATA_FLAGS))); - if (test_opt(sb, DATA_ERR_ABORT)) - seq_puts(seq, ",data_err=abort"); - - if (test_opt(sb, NOLOAD)) - seq_puts(seq, ",norecovery"); - - ext3_show_quota_options(seq, sb); - - return 0; -} - - -static struct inode *ext3_nfs_get_inode(struct super_block *sb, - u64 ino, u32 generation) -{ - struct inode *inode; - - if (ino < EXT3_FIRST_INO(sb) && ino != EXT3_ROOT_INO) - return ERR_PTR(-ESTALE); - if (ino > le32_to_cpu(EXT3_SB(sb)->s_es->s_inodes_count)) - return ERR_PTR(-ESTALE); - - /* iget isn't really right if the inode is currently unallocated!! - * - * ext3_read_inode will return a bad_inode if the inode had been - * deleted, so we should be safe. - * - * Currently we don't know the generation for parent directory, so - * a generation of 0 means "accept any" - */ - inode = ext3_iget(sb, ino); - if (IS_ERR(inode)) - return ERR_CAST(inode); - if (generation && inode->i_generation != generation) { - iput(inode); - return ERR_PTR(-ESTALE); - } - - return inode; -} - -static struct dentry *ext3_fh_to_dentry(struct super_block *sb, struct fid *fid, - int fh_len, int fh_type) -{ - return generic_fh_to_dentry(sb, fid, fh_len, fh_type, - ext3_nfs_get_inode); -} - -static struct dentry *ext3_fh_to_parent(struct super_block *sb, struct fid *fid, - int fh_len, int fh_type) -{ - return generic_fh_to_parent(sb, fid, fh_len, fh_type, - ext3_nfs_get_inode); -} - -/* - * Try to release metadata pages (indirect blocks, directories) which are - * mapped via the block device. Since these pages could have journal heads - * which would prevent try_to_free_buffers() from freeing them, we must use - * jbd layer's try_to_free_buffers() function to release them. - */ -static int bdev_try_to_free_page(struct super_block *sb, struct page *page, - gfp_t wait) -{ - journal_t *journal = EXT3_SB(sb)->s_journal; - - WARN_ON(PageChecked(page)); - if (!page_has_buffers(page)) - return 0; - if (journal) - return journal_try_to_free_buffers(journal, page, - wait & ~__GFP_WAIT); - return try_to_free_buffers(page); -} - -#ifdef CONFIG_QUOTA -#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group") -#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) - -static int ext3_write_dquot(struct dquot *dquot); -static int ext3_acquire_dquot(struct dquot *dquot); -static int ext3_release_dquot(struct dquot *dquot); -static int ext3_mark_dquot_dirty(struct dquot *dquot); -static int ext3_write_info(struct super_block *sb, int type); -static int ext3_quota_on(struct super_block *sb, int type, int format_id, - struct path *path); -static int ext3_quota_on_mount(struct super_block *sb, int type); -static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, - size_t len, loff_t off); -static ssize_t ext3_quota_write(struct super_block *sb, int type, - const char *data, size_t len, loff_t off); - -static const struct dquot_operations ext3_quota_operations = { - .write_dquot = ext3_write_dquot, - .acquire_dquot = ext3_acquire_dquot, - .release_dquot = ext3_release_dquot, - .mark_dirty = ext3_mark_dquot_dirty, - .write_info = ext3_write_info, - .alloc_dquot = dquot_alloc, - .destroy_dquot = dquot_destroy, -}; - -static const struct quotactl_ops ext3_qctl_operations = { - .quota_on = ext3_quota_on, - .quota_off = dquot_quota_off, - .quota_sync = dquot_quota_sync, - .get_info = dquot_get_dqinfo, - .set_info = dquot_set_dqinfo, - .get_dqblk = dquot_get_dqblk, - .set_dqblk = dquot_set_dqblk -}; -#endif - -static const struct super_operations ext3_sops = { - .alloc_inode = ext3_alloc_inode, - .destroy_inode = ext3_destroy_inode, - .write_inode = ext3_write_inode, - .dirty_inode = ext3_dirty_inode, - .drop_inode = ext3_drop_inode, - .evict_inode = ext3_evict_inode, - .put_super = ext3_put_super, - .sync_fs = ext3_sync_fs, - .freeze_fs = ext3_freeze, - .unfreeze_fs = ext3_unfreeze, - .statfs = ext3_statfs, - .remount_fs = ext3_remount, - .show_options = ext3_show_options, -#ifdef CONFIG_QUOTA - .quota_read = ext3_quota_read, - .quota_write = ext3_quota_write, -#endif - .bdev_try_to_free_page = bdev_try_to_free_page, -}; - -static const struct export_operations ext3_export_ops = { - .fh_to_dentry = ext3_fh_to_dentry, - .fh_to_parent = ext3_fh_to_parent, - .get_parent = ext3_get_parent, -}; - -enum { - Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid, - Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro, - Opt_nouid32, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov, - Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, - Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh, - Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev, - Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, - Opt_data_err_abort, Opt_data_err_ignore, - Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, - Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota, - Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, - Opt_resize, Opt_usrquota, Opt_grpquota -}; - -static const match_table_t tokens = { - {Opt_bsd_df, "bsddf"}, - {Opt_minix_df, "minixdf"}, - {Opt_grpid, "grpid"}, - {Opt_grpid, "bsdgroups"}, - {Opt_nogrpid, "nogrpid"}, - {Opt_nogrpid, "sysvgroups"}, - {Opt_resgid, "resgid=%u"}, - {Opt_resuid, "resuid=%u"}, - {Opt_sb, "sb=%u"}, - {Opt_err_cont, "errors=continue"}, - {Opt_err_panic, "errors=panic"}, - {Opt_err_ro, "errors=remount-ro"}, - {Opt_nouid32, "nouid32"}, - {Opt_nocheck, "nocheck"}, - {Opt_nocheck, "check=none"}, - {Opt_debug, "debug"}, - {Opt_oldalloc, "oldalloc"}, - {Opt_orlov, "orlov"}, - {Opt_user_xattr, "user_xattr"}, - {Opt_nouser_xattr, "nouser_xattr"}, - {Opt_acl, "acl"}, - {Opt_noacl, "noacl"}, - {Opt_reservation, "reservation"}, - {Opt_noreservation, "noreservation"}, - {Opt_noload, "noload"}, - {Opt_noload, "norecovery"}, - {Opt_nobh, "nobh"}, - {Opt_bh, "bh"}, - {Opt_commit, "commit=%u"}, - {Opt_journal_update, "journal=update"}, - {Opt_journal_inum, "journal=%u"}, - {Opt_journal_dev, "journal_dev=%u"}, - {Opt_abort, "abort"}, - {Opt_data_journal, "data=journal"}, - {Opt_data_ordered, "data=ordered"}, - {Opt_data_writeback, "data=writeback"}, - {Opt_data_err_abort, "data_err=abort"}, - {Opt_data_err_ignore, "data_err=ignore"}, - {Opt_offusrjquota, "usrjquota="}, - {Opt_usrjquota, "usrjquota=%s"}, - {Opt_offgrpjquota, "grpjquota="}, - {Opt_grpjquota, "grpjquota=%s"}, - {Opt_jqfmt_vfsold, "jqfmt=vfsold"}, - {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"}, - {Opt_jqfmt_vfsv1, "jqfmt=vfsv1"}, - {Opt_grpquota, "grpquota"}, - {Opt_noquota, "noquota"}, - {Opt_quota, "quota"}, - {Opt_usrquota, "usrquota"}, - {Opt_barrier, "barrier=%u"}, - {Opt_barrier, "barrier"}, - {Opt_nobarrier, "nobarrier"}, - {Opt_resize, "resize"}, - {Opt_err, NULL}, -}; - -static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb) -{ - ext3_fsblk_t sb_block; - char *options = (char *) *data; - - if (!options || strncmp(options, "sb=", 3) != 0) - return 1; /* Default location */ - options += 3; - /*todo: use simple_strtoll with >32bit ext3 */ - sb_block = simple_strtoul(options, &options, 0); - if (*options && *options != ',') { - ext3_msg(sb, "error: invalid sb specification: %s", - (char *) *data); - return 1; - } - if (*options == ',') - options++; - *data = (void *) options; - return sb_block; -} - -#ifdef CONFIG_QUOTA -static int set_qf_name(struct super_block *sb, int qtype, substring_t *args) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - char *qname; - - if (sb_any_quota_loaded(sb) && - !sbi->s_qf_names[qtype]) { - ext3_msg(sb, KERN_ERR, - "Cannot change journaled " - "quota options when quota turned on"); - return 0; - } - qname = match_strdup(args); - if (!qname) { - ext3_msg(sb, KERN_ERR, - "Not enough memory for storing quotafile name"); - return 0; - } - if (sbi->s_qf_names[qtype] && - strcmp(sbi->s_qf_names[qtype], qname)) { - ext3_msg(sb, KERN_ERR, - "%s quota file already specified", QTYPE2NAME(qtype)); - kfree(qname); - return 0; - } - sbi->s_qf_names[qtype] = qname; - if (strchr(sbi->s_qf_names[qtype], '/')) { - ext3_msg(sb, KERN_ERR, - "quotafile must be on filesystem root"); - kfree(sbi->s_qf_names[qtype]); - sbi->s_qf_names[qtype] = NULL; - return 0; - } - set_opt(sbi->s_mount_opt, QUOTA); - return 1; -} - -static int clear_qf_name(struct super_block *sb, int qtype) { - - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (sb_any_quota_loaded(sb) && - sbi->s_qf_names[qtype]) { - ext3_msg(sb, KERN_ERR, "Cannot change journaled quota options" - " when quota turned on"); - return 0; - } - /* - * The space will be released later when all options are confirmed - * to be correct - */ - sbi->s_qf_names[qtype] = NULL; - return 1; -} -#endif - -static int parse_options (char *options, struct super_block *sb, - unsigned int *inum, unsigned long *journal_devnum, - ext3_fsblk_t *n_blocks_count, int is_remount) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - char * p; - substring_t args[MAX_OPT_ARGS]; - int data_opt = 0; - int option; -#ifdef CONFIG_QUOTA - int qfmt; -#endif - - if (!options) - return 1; - - while ((p = strsep (&options, ",")) != NULL) { - int token; - if (!*p) - continue; - /* - * Initialize args struct so we know whether arg was - * found; some options take optional arguments. - */ - args[0].to = args[0].from = 0; - token = match_token(p, tokens, args); - switch (token) { - case Opt_bsd_df: - clear_opt (sbi->s_mount_opt, MINIX_DF); - break; - case Opt_minix_df: - set_opt (sbi->s_mount_opt, MINIX_DF); - break; - case Opt_grpid: - set_opt (sbi->s_mount_opt, GRPID); - break; - case Opt_nogrpid: - clear_opt (sbi->s_mount_opt, GRPID); - break; - case Opt_resuid: - if (match_int(&args[0], &option)) - return 0; - sbi->s_resuid = option; - break; - case Opt_resgid: - if (match_int(&args[0], &option)) - return 0; - sbi->s_resgid = option; - break; - case Opt_sb: - /* handled by get_sb_block() instead of here */ - /* *sb_block = match_int(&args[0]); */ - break; - case Opt_err_panic: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_RO); - set_opt (sbi->s_mount_opt, ERRORS_PANIC); - break; - case Opt_err_ro: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_RO); - break; - case Opt_err_cont: - clear_opt (sbi->s_mount_opt, ERRORS_RO); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_CONT); - break; - case Opt_nouid32: - set_opt (sbi->s_mount_opt, NO_UID32); - break; - case Opt_nocheck: - clear_opt (sbi->s_mount_opt, CHECK); - break; - case Opt_debug: - set_opt (sbi->s_mount_opt, DEBUG); - break; - case Opt_oldalloc: - ext3_msg(sb, KERN_WARNING, - "Ignoring deprecated oldalloc option"); - break; - case Opt_orlov: - ext3_msg(sb, KERN_WARNING, - "Ignoring deprecated orlov option"); - break; -#ifdef CONFIG_EXT3_FS_XATTR - case Opt_user_xattr: - set_opt (sbi->s_mount_opt, XATTR_USER); - break; - case Opt_nouser_xattr: - clear_opt (sbi->s_mount_opt, XATTR_USER); - break; -#else - case Opt_user_xattr: - case Opt_nouser_xattr: - ext3_msg(sb, KERN_INFO, - "(no)user_xattr options not supported"); - break; -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - case Opt_acl: - set_opt(sbi->s_mount_opt, POSIX_ACL); - break; - case Opt_noacl: - clear_opt(sbi->s_mount_opt, POSIX_ACL); - break; -#else - case Opt_acl: - case Opt_noacl: - ext3_msg(sb, KERN_INFO, - "(no)acl options not supported"); - break; -#endif - case Opt_reservation: - set_opt(sbi->s_mount_opt, RESERVATION); - break; - case Opt_noreservation: - clear_opt(sbi->s_mount_opt, RESERVATION); - break; - case Opt_journal_update: - /* @@@ FIXME */ - /* Eventually we will want to be able to create - a journal file here. For now, only allow the - user to specify an existing inode to be the - journal file. */ - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - set_opt (sbi->s_mount_opt, UPDATE_JOURNAL); - break; - case Opt_journal_inum: - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - if (match_int(&args[0], &option)) - return 0; - *inum = option; - break; - case Opt_journal_dev: - if (is_remount) { - ext3_msg(sb, KERN_ERR, "error: cannot specify " - "journal on remount"); - return 0; - } - if (match_int(&args[0], &option)) - return 0; - *journal_devnum = option; - break; - case Opt_noload: - set_opt (sbi->s_mount_opt, NOLOAD); - break; - case Opt_commit: - if (match_int(&args[0], &option)) - return 0; - if (option < 0) - return 0; - if (option == 0) - option = JBD_DEFAULT_MAX_COMMIT_AGE; - sbi->s_commit_interval = HZ * option; - break; - case Opt_data_journal: - data_opt = EXT3_MOUNT_JOURNAL_DATA; - goto datacheck; - case Opt_data_ordered: - data_opt = EXT3_MOUNT_ORDERED_DATA; - goto datacheck; - case Opt_data_writeback: - data_opt = EXT3_MOUNT_WRITEBACK_DATA; - datacheck: - if (is_remount) { - if (test_opt(sb, DATA_FLAGS) == data_opt) - break; - ext3_msg(sb, KERN_ERR, - "error: cannot change " - "data mode on remount. The filesystem " - "is mounted in data=%s mode and you " - "try to remount it in data=%s mode.", - data_mode_string(test_opt(sb, - DATA_FLAGS)), - data_mode_string(data_opt)); - return 0; - } else { - clear_opt(sbi->s_mount_opt, DATA_FLAGS); - sbi->s_mount_opt |= data_opt; - } - break; - case Opt_data_err_abort: - set_opt(sbi->s_mount_opt, DATA_ERR_ABORT); - break; - case Opt_data_err_ignore: - clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT); - break; -#ifdef CONFIG_QUOTA - case Opt_usrjquota: - if (!set_qf_name(sb, USRQUOTA, &args[0])) - return 0; - break; - case Opt_grpjquota: - if (!set_qf_name(sb, GRPQUOTA, &args[0])) - return 0; - break; - case Opt_offusrjquota: - if (!clear_qf_name(sb, USRQUOTA)) - return 0; - break; - case Opt_offgrpjquota: - if (!clear_qf_name(sb, GRPQUOTA)) - return 0; - break; - case Opt_jqfmt_vfsold: - qfmt = QFMT_VFS_OLD; - goto set_qf_format; - case Opt_jqfmt_vfsv0: - qfmt = QFMT_VFS_V0; - goto set_qf_format; - case Opt_jqfmt_vfsv1: - qfmt = QFMT_VFS_V1; -set_qf_format: - if (sb_any_quota_loaded(sb) && - sbi->s_jquota_fmt != qfmt) { - ext3_msg(sb, KERN_ERR, "error: cannot change " - "journaled quota options when " - "quota turned on."); - return 0; - } - sbi->s_jquota_fmt = qfmt; - break; - case Opt_quota: - case Opt_usrquota: - set_opt(sbi->s_mount_opt, QUOTA); - set_opt(sbi->s_mount_opt, USRQUOTA); - break; - case Opt_grpquota: - set_opt(sbi->s_mount_opt, QUOTA); - set_opt(sbi->s_mount_opt, GRPQUOTA); - break; - case Opt_noquota: - if (sb_any_quota_loaded(sb)) { - ext3_msg(sb, KERN_ERR, "error: cannot change " - "quota options when quota turned on."); - return 0; - } - clear_opt(sbi->s_mount_opt, QUOTA); - clear_opt(sbi->s_mount_opt, USRQUOTA); - clear_opt(sbi->s_mount_opt, GRPQUOTA); - break; -#else - case Opt_quota: - case Opt_usrquota: - case Opt_grpquota: - ext3_msg(sb, KERN_ERR, - "error: quota options not supported."); - break; - case Opt_usrjquota: - case Opt_grpjquota: - case Opt_offusrjquota: - case Opt_offgrpjquota: - case Opt_jqfmt_vfsold: - case Opt_jqfmt_vfsv0: - case Opt_jqfmt_vfsv1: - ext3_msg(sb, KERN_ERR, - "error: journaled quota options not " - "supported."); - break; - case Opt_noquota: - break; -#endif - case Opt_abort: - set_opt(sbi->s_mount_opt, ABORT); - break; - case Opt_nobarrier: - clear_opt(sbi->s_mount_opt, BARRIER); - break; - case Opt_barrier: - if (args[0].from) { - if (match_int(&args[0], &option)) - return 0; - } else - option = 1; /* No argument, default to 1 */ - if (option) - set_opt(sbi->s_mount_opt, BARRIER); - else - clear_opt(sbi->s_mount_opt, BARRIER); - break; - case Opt_ignore: - break; - case Opt_resize: - if (!is_remount) { - ext3_msg(sb, KERN_ERR, - "error: resize option only available " - "for remount"); - return 0; - } - if (match_int(&args[0], &option) != 0) - return 0; - *n_blocks_count = option; - break; - case Opt_nobh: - ext3_msg(sb, KERN_WARNING, - "warning: ignoring deprecated nobh option"); - break; - case Opt_bh: - ext3_msg(sb, KERN_WARNING, - "warning: ignoring deprecated bh option"); - break; - default: - ext3_msg(sb, KERN_ERR, - "error: unrecognized mount option \"%s\" " - "or missing value", p); - return 0; - } - } -#ifdef CONFIG_QUOTA - if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) { - if (test_opt(sb, USRQUOTA) && sbi->s_qf_names[USRQUOTA]) - clear_opt(sbi->s_mount_opt, USRQUOTA); - if (test_opt(sb, GRPQUOTA) && sbi->s_qf_names[GRPQUOTA]) - clear_opt(sbi->s_mount_opt, GRPQUOTA); - - if (test_opt(sb, GRPQUOTA) || test_opt(sb, USRQUOTA)) { - ext3_msg(sb, KERN_ERR, "error: old and new quota " - "format mixing."); - return 0; - } - - if (!sbi->s_jquota_fmt) { - ext3_msg(sb, KERN_ERR, "error: journaled quota format " - "not specified."); - return 0; - } - } else { - if (sbi->s_jquota_fmt) { - ext3_msg(sb, KERN_ERR, "error: journaled quota format " - "specified with no journaling " - "enabled."); - return 0; - } - } -#endif - return 1; -} - -static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es, - int read_only) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - int res = 0; - - if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) { - ext3_msg(sb, KERN_ERR, - "error: revision level too high, " - "forcing read-only mode"); - res = MS_RDONLY; - } - if (read_only) - return res; - if (!(sbi->s_mount_state & EXT3_VALID_FS)) - ext3_msg(sb, KERN_WARNING, - "warning: mounting unchecked fs, " - "running e2fsck is recommended"); - else if ((sbi->s_mount_state & EXT3_ERROR_FS)) - ext3_msg(sb, KERN_WARNING, - "warning: mounting fs with errors, " - "running e2fsck is recommended"); - else if ((__s16) le16_to_cpu(es->s_max_mnt_count) > 0 && - le16_to_cpu(es->s_mnt_count) >= - le16_to_cpu(es->s_max_mnt_count)) - ext3_msg(sb, KERN_WARNING, - "warning: maximal mount count reached, " - "running e2fsck is recommended"); - else if (le32_to_cpu(es->s_checkinterval) && - (le32_to_cpu(es->s_lastcheck) + - le32_to_cpu(es->s_checkinterval) <= get_seconds())) - ext3_msg(sb, KERN_WARNING, - "warning: checktime reached, " - "running e2fsck is recommended"); -#if 0 - /* @@@ We _will_ want to clear the valid bit if we find - inconsistencies, to force a fsck at reboot. But for - a plain journaled filesystem we can keep it set as - valid forever! :) */ - es->s_state &= cpu_to_le16(~EXT3_VALID_FS); -#endif - if (!le16_to_cpu(es->s_max_mnt_count)) - es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT); - le16_add_cpu(&es->s_mnt_count, 1); - es->s_mtime = cpu_to_le32(get_seconds()); - ext3_update_dynamic_rev(sb); - EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - - ext3_commit_super(sb, es, 1); - if (test_opt(sb, DEBUG)) - ext3_msg(sb, KERN_INFO, "[bs=%lu, gc=%lu, " - "bpg=%lu, ipg=%lu, mo=%04lx]", - sb->s_blocksize, - sbi->s_groups_count, - EXT3_BLOCKS_PER_GROUP(sb), - EXT3_INODES_PER_GROUP(sb), - sbi->s_mount_opt); - - if (EXT3_SB(sb)->s_journal->j_inode == NULL) { - char b[BDEVNAME_SIZE]; - ext3_msg(sb, KERN_INFO, "using external journal on %s", - bdevname(EXT3_SB(sb)->s_journal->j_dev, b)); - } else { - ext3_msg(sb, KERN_INFO, "using internal journal"); - } - cleancache_init_fs(sb); - return res; -} - -/* Called at mount-time, super-block is locked */ -static int ext3_check_descriptors(struct super_block *sb) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - int i; - - ext3_debug ("Checking group descriptors"); - - for (i = 0; i < sbi->s_groups_count; i++) { - struct ext3_group_desc *gdp = ext3_get_group_desc(sb, i, NULL); - ext3_fsblk_t first_block = ext3_group_first_block_no(sb, i); - ext3_fsblk_t last_block; - - if (i == sbi->s_groups_count - 1) - last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1; - else - last_block = first_block + - (EXT3_BLOCKS_PER_GROUP(sb) - 1); - - if (le32_to_cpu(gdp->bg_block_bitmap) < first_block || - le32_to_cpu(gdp->bg_block_bitmap) > last_block) - { - ext3_error (sb, "ext3_check_descriptors", - "Block bitmap for group %d" - " not in group (block %lu)!", - i, (unsigned long) - le32_to_cpu(gdp->bg_block_bitmap)); - return 0; - } - if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block || - le32_to_cpu(gdp->bg_inode_bitmap) > last_block) - { - ext3_error (sb, "ext3_check_descriptors", - "Inode bitmap for group %d" - " not in group (block %lu)!", - i, (unsigned long) - le32_to_cpu(gdp->bg_inode_bitmap)); - return 0; - } - if (le32_to_cpu(gdp->bg_inode_table) < first_block || - le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group - 1 > - last_block) - { - ext3_error (sb, "ext3_check_descriptors", - "Inode table for group %d" - " not in group (block %lu)!", - i, (unsigned long) - le32_to_cpu(gdp->bg_inode_table)); - return 0; - } - } - - sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb)); - sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb)); - return 1; -} - - -/* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at - * the superblock) which were deleted from all directories, but held open by - * a process at the time of a crash. We walk the list and try to delete these - * inodes at recovery time (only with a read-write filesystem). - * - * In order to keep the orphan inode chain consistent during traversal (in - * case of crash during recovery), we link each inode into the superblock - * orphan list_head and handle it the same way as an inode deletion during - * normal operation (which journals the operations for us). - * - * We only do an iget() and an iput() on each inode, which is very safe if we - * accidentally point at an in-use or already deleted inode. The worst that - * can happen in this case is that we get a "bit already cleared" message from - * ext3_free_inode(). The only reason we would point at a wrong inode is if - * e2fsck was run on this filesystem, and it must have already done the orphan - * inode cleanup for us, so we can safely abort without any further action. - */ -static void ext3_orphan_cleanup (struct super_block * sb, - struct ext3_super_block * es) -{ - unsigned int s_flags = sb->s_flags; - int nr_orphans = 0, nr_truncates = 0; -#ifdef CONFIG_QUOTA - int i; -#endif - if (!es->s_last_orphan) { - jbd_debug(4, "no orphan inodes to clean up\n"); - return; - } - - if (bdev_read_only(sb->s_bdev)) { - ext3_msg(sb, KERN_ERR, "error: write access " - "unavailable, skipping orphan cleanup."); - return; - } - - /* Check if feature set allows readwrite operations */ - if (EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP)) { - ext3_msg(sb, KERN_INFO, "Skipping orphan cleanup due to " - "unknown ROCOMPAT features"); - return; - } - - if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) { - if (es->s_last_orphan) - jbd_debug(1, "Errors on filesystem, " - "clearing orphan list.\n"); - es->s_last_orphan = 0; - jbd_debug(1, "Skipping orphan recovery on fs with errors.\n"); - return; - } - - if (s_flags & MS_RDONLY) { - ext3_msg(sb, KERN_INFO, "orphan cleanup on readonly fs"); - sb->s_flags &= ~MS_RDONLY; - } -#ifdef CONFIG_QUOTA - /* Needed for iput() to work correctly and not trash data */ - sb->s_flags |= MS_ACTIVE; - /* Turn on quotas so that they are updated correctly */ - for (i = 0; i < MAXQUOTAS; i++) { - if (EXT3_SB(sb)->s_qf_names[i]) { - int ret = ext3_quota_on_mount(sb, i); - if (ret < 0) - ext3_msg(sb, KERN_ERR, - "error: cannot turn on journaled " - "quota: %d", ret); - } - } -#endif - - while (es->s_last_orphan) { - struct inode *inode; - - inode = ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan)); - if (IS_ERR(inode)) { - es->s_last_orphan = 0; - break; - } - - list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); - dquot_initialize(inode); - if (inode->i_nlink) { - printk(KERN_DEBUG - "%s: truncating inode %lu to %Ld bytes\n", - __func__, inode->i_ino, inode->i_size); - jbd_debug(2, "truncating inode %lu to %Ld bytes\n", - inode->i_ino, inode->i_size); - ext3_truncate(inode); - nr_truncates++; - } else { - printk(KERN_DEBUG - "%s: deleting unreferenced inode %lu\n", - __func__, inode->i_ino); - jbd_debug(2, "deleting unreferenced inode %lu\n", - inode->i_ino); - nr_orphans++; - } - iput(inode); /* The delete magic happens here! */ - } - -#define PLURAL(x) (x), ((x)==1) ? "" : "s" - - if (nr_orphans) - ext3_msg(sb, KERN_INFO, "%d orphan inode%s deleted", - PLURAL(nr_orphans)); - if (nr_truncates) - ext3_msg(sb, KERN_INFO, "%d truncate%s cleaned up", - PLURAL(nr_truncates)); -#ifdef CONFIG_QUOTA - /* Turn quotas off */ - for (i = 0; i < MAXQUOTAS; i++) { - if (sb_dqopt(sb)->files[i]) - dquot_quota_off(sb, i); - } -#endif - sb->s_flags = s_flags; /* Restore MS_RDONLY status */ -} - -/* - * Maximal file size. There is a direct, and {,double-,triple-}indirect - * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. - * We need to be 1 filesystem block less than the 2^32 sector limit. - */ -static loff_t ext3_max_size(int bits) -{ - loff_t res = EXT3_NDIR_BLOCKS; - int meta_blocks; - loff_t upper_limit; - - /* This is calculated to be the largest file size for a - * dense, file such that the total number of - * sectors in the file, including data and all indirect blocks, - * does not exceed 2^32 -1 - * __u32 i_blocks representing the total number of - * 512 bytes blocks of the file - */ - upper_limit = (1LL << 32) - 1; - - /* total blocks in file system block size */ - upper_limit >>= (bits - 9); - - - /* indirect blocks */ - meta_blocks = 1; - /* double indirect blocks */ - meta_blocks += 1 + (1LL << (bits-2)); - /* tripple indirect blocks */ - meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2))); - - upper_limit -= meta_blocks; - upper_limit <<= bits; - - res += 1LL << (bits-2); - res += 1LL << (2*(bits-2)); - res += 1LL << (3*(bits-2)); - res <<= bits; - if (res > upper_limit) - res = upper_limit; - - if (res > MAX_LFS_FILESIZE) - res = MAX_LFS_FILESIZE; - - return res; -} - -static ext3_fsblk_t descriptor_loc(struct super_block *sb, - ext3_fsblk_t logic_sb_block, - int nr) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - unsigned long bg, first_meta_bg; - int has_super = 0; - - first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg); - - if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) || - nr < first_meta_bg) - return (logic_sb_block + nr + 1); - bg = sbi->s_desc_per_block * nr; - if (ext3_bg_has_super(sb, bg)) - has_super = 1; - return (has_super + ext3_group_first_block_no(sb, bg)); -} - - -static int ext3_fill_super (struct super_block *sb, void *data, int silent) -{ - struct buffer_head * bh; - struct ext3_super_block *es = NULL; - struct ext3_sb_info *sbi; - ext3_fsblk_t block; - ext3_fsblk_t sb_block = get_sb_block(&data, sb); - ext3_fsblk_t logic_sb_block; - unsigned long offset = 0; - unsigned int journal_inum = 0; - unsigned long journal_devnum = 0; - unsigned long def_mount_opts; - struct inode *root; - int blocksize; - int hblock; - int db_count; - int i; - int needs_recovery; - int ret = -EINVAL; - __le32 features; - int err; - - sbi = kzalloc(sizeof(*sbi), GFP_KERNEL); - if (!sbi) - return -ENOMEM; - - sbi->s_blockgroup_lock = - kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL); - if (!sbi->s_blockgroup_lock) { - kfree(sbi); - return -ENOMEM; - } - sb->s_fs_info = sbi; - sbi->s_mount_opt = 0; - sbi->s_resuid = EXT3_DEF_RESUID; - sbi->s_resgid = EXT3_DEF_RESGID; - sbi->s_sb_block = sb_block; - - blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE); - if (!blocksize) { - ext3_msg(sb, KERN_ERR, "error: unable to set blocksize"); - goto out_fail; - } - - /* - * The ext3 superblock will not be buffer aligned for other than 1kB - * block sizes. We need to calculate the offset from buffer start. - */ - if (blocksize != EXT3_MIN_BLOCK_SIZE) { - logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; - offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; - } else { - logic_sb_block = sb_block; - } - - if (!(bh = sb_bread(sb, logic_sb_block))) { - ext3_msg(sb, KERN_ERR, "error: unable to read superblock"); - goto out_fail; - } - /* - * Note: s_es must be initialized as soon as possible because - * some ext3 macro-instructions depend on its value - */ - es = (struct ext3_super_block *) (bh->b_data + offset); - sbi->s_es = es; - sb->s_magic = le16_to_cpu(es->s_magic); - if (sb->s_magic != EXT3_SUPER_MAGIC) - goto cantfind_ext3; - - /* Set defaults before we parse the mount options */ - def_mount_opts = le32_to_cpu(es->s_default_mount_opts); - if (def_mount_opts & EXT3_DEFM_DEBUG) - set_opt(sbi->s_mount_opt, DEBUG); - if (def_mount_opts & EXT3_DEFM_BSDGROUPS) - set_opt(sbi->s_mount_opt, GRPID); - if (def_mount_opts & EXT3_DEFM_UID16) - set_opt(sbi->s_mount_opt, NO_UID32); -#ifdef CONFIG_EXT3_FS_XATTR - if (def_mount_opts & EXT3_DEFM_XATTR_USER) - set_opt(sbi->s_mount_opt, XATTR_USER); -#endif -#ifdef CONFIG_EXT3_FS_POSIX_ACL - if (def_mount_opts & EXT3_DEFM_ACL) - set_opt(sbi->s_mount_opt, POSIX_ACL); -#endif - if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA) - set_opt(sbi->s_mount_opt, JOURNAL_DATA); - else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED) - set_opt(sbi->s_mount_opt, ORDERED_DATA); - else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK) - set_opt(sbi->s_mount_opt, WRITEBACK_DATA); - - if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC) - set_opt(sbi->s_mount_opt, ERRORS_PANIC); - else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_CONTINUE) - set_opt(sbi->s_mount_opt, ERRORS_CONT); - else - set_opt(sbi->s_mount_opt, ERRORS_RO); - - sbi->s_resuid = le16_to_cpu(es->s_def_resuid); - sbi->s_resgid = le16_to_cpu(es->s_def_resgid); - - /* enable barriers by default */ - set_opt(sbi->s_mount_opt, BARRIER); - set_opt(sbi->s_mount_opt, RESERVATION); - - if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum, - NULL, 0)) - goto failed_mount; - - sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | - (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0); - - if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV && - (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) || - EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) || - EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U))) - ext3_msg(sb, KERN_WARNING, - "warning: feature flags set on rev 0 fs, " - "running e2fsck is recommended"); - /* - * Check feature flags regardless of the revision level, since we - * previously didn't change the revision level when setting the flags, - * so there is a chance incompat flags are set on a rev 0 filesystem. - */ - features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP); - if (features) { - ext3_msg(sb, KERN_ERR, - "error: couldn't mount because of unsupported " - "optional features (%x)", le32_to_cpu(features)); - goto failed_mount; - } - features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP); - if (!(sb->s_flags & MS_RDONLY) && features) { - ext3_msg(sb, KERN_ERR, - "error: couldn't mount RDWR because of unsupported " - "optional features (%x)", le32_to_cpu(features)); - goto failed_mount; - } - blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size); - - if (blocksize < EXT3_MIN_BLOCK_SIZE || - blocksize > EXT3_MAX_BLOCK_SIZE) { - ext3_msg(sb, KERN_ERR, - "error: couldn't mount because of unsupported " - "filesystem blocksize %d", blocksize); - goto failed_mount; - } - - hblock = bdev_logical_block_size(sb->s_bdev); - if (sb->s_blocksize != blocksize) { - /* - * Make sure the blocksize for the filesystem is larger - * than the hardware sectorsize for the machine. - */ - if (blocksize < hblock) { - ext3_msg(sb, KERN_ERR, - "error: fsblocksize %d too small for " - "hardware sectorsize %d", blocksize, hblock); - goto failed_mount; - } - - brelse (bh); - if (!sb_set_blocksize(sb, blocksize)) { - ext3_msg(sb, KERN_ERR, - "error: bad blocksize %d", blocksize); - goto out_fail; - } - logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; - offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; - bh = sb_bread(sb, logic_sb_block); - if (!bh) { - ext3_msg(sb, KERN_ERR, - "error: can't read superblock on 2nd try"); - goto failed_mount; - } - es = (struct ext3_super_block *)(bh->b_data + offset); - sbi->s_es = es; - if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) { - ext3_msg(sb, KERN_ERR, - "error: magic mismatch"); - goto failed_mount; - } - } - - sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits); - - if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) { - sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE; - sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO; - } else { - sbi->s_inode_size = le16_to_cpu(es->s_inode_size); - sbi->s_first_ino = le32_to_cpu(es->s_first_ino); - if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) || - (!is_power_of_2(sbi->s_inode_size)) || - (sbi->s_inode_size > blocksize)) { - ext3_msg(sb, KERN_ERR, - "error: unsupported inode size: %d", - sbi->s_inode_size); - goto failed_mount; - } - } - sbi->s_frag_size = EXT3_MIN_FRAG_SIZE << - le32_to_cpu(es->s_log_frag_size); - if (blocksize != sbi->s_frag_size) { - ext3_msg(sb, KERN_ERR, - "error: fragsize %lu != blocksize %u (unsupported)", - sbi->s_frag_size, blocksize); - goto failed_mount; - } - sbi->s_frags_per_block = 1; - sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); - sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); - sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); - if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0) - goto cantfind_ext3; - sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb); - if (sbi->s_inodes_per_block == 0) - goto cantfind_ext3; - sbi->s_itb_per_group = sbi->s_inodes_per_group / - sbi->s_inodes_per_block; - sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc); - sbi->s_sbh = bh; - sbi->s_mount_state = le16_to_cpu(es->s_state); - sbi->s_addr_per_block_bits = ilog2(EXT3_ADDR_PER_BLOCK(sb)); - sbi->s_desc_per_block_bits = ilog2(EXT3_DESC_PER_BLOCK(sb)); - for (i=0; i < 4; i++) - sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); - sbi->s_def_hash_version = es->s_def_hash_version; - i = le32_to_cpu(es->s_flags); - if (i & EXT2_FLAGS_UNSIGNED_HASH) - sbi->s_hash_unsigned = 3; - else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) { -#ifdef __CHAR_UNSIGNED__ - es->s_flags |= cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH); - sbi->s_hash_unsigned = 3; -#else - es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH); -#endif - } - - if (sbi->s_blocks_per_group > blocksize * 8) { - ext3_msg(sb, KERN_ERR, - "#blocks per group too big: %lu", - sbi->s_blocks_per_group); - goto failed_mount; - } - if (sbi->s_frags_per_group > blocksize * 8) { - ext3_msg(sb, KERN_ERR, - "error: #fragments per group too big: %lu", - sbi->s_frags_per_group); - goto failed_mount; - } - if (sbi->s_inodes_per_group > blocksize * 8) { - ext3_msg(sb, KERN_ERR, - "error: #inodes per group too big: %lu", - sbi->s_inodes_per_group); - goto failed_mount; - } - - err = generic_check_addressable(sb->s_blocksize_bits, - le32_to_cpu(es->s_blocks_count)); - if (err) { - ext3_msg(sb, KERN_ERR, - "error: filesystem is too large to mount safely"); - if (sizeof(sector_t) < 8) - ext3_msg(sb, KERN_ERR, - "error: CONFIG_LBDAF not enabled"); - ret = err; - goto failed_mount; - } - - if (EXT3_BLOCKS_PER_GROUP(sb) == 0) - goto cantfind_ext3; - sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) - - le32_to_cpu(es->s_first_data_block) - 1) - / EXT3_BLOCKS_PER_GROUP(sb)) + 1; - db_count = DIV_ROUND_UP(sbi->s_groups_count, EXT3_DESC_PER_BLOCK(sb)); - sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), - GFP_KERNEL); - if (sbi->s_group_desc == NULL) { - ext3_msg(sb, KERN_ERR, - "error: not enough memory"); - ret = -ENOMEM; - goto failed_mount; - } - - bgl_lock_init(sbi->s_blockgroup_lock); - - for (i = 0; i < db_count; i++) { - block = descriptor_loc(sb, logic_sb_block, i); - sbi->s_group_desc[i] = sb_bread(sb, block); - if (!sbi->s_group_desc[i]) { - ext3_msg(sb, KERN_ERR, - "error: can't read group descriptor %d", i); - db_count = i; - goto failed_mount2; - } - } - if (!ext3_check_descriptors (sb)) { - ext3_msg(sb, KERN_ERR, - "error: group descriptors corrupted"); - goto failed_mount2; - } - sbi->s_gdb_count = db_count; - get_random_bytes(&sbi->s_next_generation, sizeof(u32)); - spin_lock_init(&sbi->s_next_gen_lock); - - /* per fileystem reservation list head & lock */ - spin_lock_init(&sbi->s_rsv_window_lock); - sbi->s_rsv_window_root = RB_ROOT; - /* Add a single, static dummy reservation to the start of the - * reservation window list --- it gives us a placeholder for - * append-at-start-of-list which makes the allocation logic - * _much_ simpler. */ - sbi->s_rsv_window_head.rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - sbi->s_rsv_window_head.rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; - sbi->s_rsv_window_head.rsv_alloc_hit = 0; - sbi->s_rsv_window_head.rsv_goal_size = 0; - ext3_rsv_window_add(sb, &sbi->s_rsv_window_head); - - /* - * set up enough so that it can read an inode - */ - sb->s_op = &ext3_sops; - sb->s_export_op = &ext3_export_ops; - sb->s_xattr = ext3_xattr_handlers; -#ifdef CONFIG_QUOTA - sb->s_qcop = &ext3_qctl_operations; - sb->dq_op = &ext3_quota_operations; -#endif - memcpy(sb->s_uuid, es->s_uuid, sizeof(es->s_uuid)); - INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ - mutex_init(&sbi->s_orphan_lock); - mutex_init(&sbi->s_resize_lock); - - sb->s_root = NULL; - - needs_recovery = (es->s_last_orphan != 0 || - EXT3_HAS_INCOMPAT_FEATURE(sb, - EXT3_FEATURE_INCOMPAT_RECOVER)); - - /* - * The first inode we look at is the journal inode. Don't try - * root first: it may be modified in the journal! - */ - if (!test_opt(sb, NOLOAD) && - EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) { - if (ext3_load_journal(sb, es, journal_devnum)) - goto failed_mount2; - } else if (journal_inum) { - if (ext3_create_journal(sb, es, journal_inum)) - goto failed_mount2; - } else { - if (!silent) - ext3_msg(sb, KERN_ERR, - "error: no journal found. " - "mounting ext3 over ext2?"); - goto failed_mount2; - } - err = percpu_counter_init(&sbi->s_freeblocks_counter, - ext3_count_free_blocks(sb)); - if (!err) { - err = percpu_counter_init(&sbi->s_freeinodes_counter, - ext3_count_free_inodes(sb)); - } - if (!err) { - err = percpu_counter_init(&sbi->s_dirs_counter, - ext3_count_dirs(sb)); - } - if (err) { - ext3_msg(sb, KERN_ERR, "error: insufficient memory"); - ret = err; - goto failed_mount3; - } - - /* We have now updated the journal if required, so we can - * validate the data journaling mode. */ - switch (test_opt(sb, DATA_FLAGS)) { - case 0: - /* No mode set, assume a default based on the journal - capabilities: ORDERED_DATA if the journal can - cope, else JOURNAL_DATA */ - if (journal_check_available_features - (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) - set_opt(sbi->s_mount_opt, DEFAULT_DATA_MODE); - else - set_opt(sbi->s_mount_opt, JOURNAL_DATA); - break; - - case EXT3_MOUNT_ORDERED_DATA: - case EXT3_MOUNT_WRITEBACK_DATA: - if (!journal_check_available_features - (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) { - ext3_msg(sb, KERN_ERR, - "error: journal does not support " - "requested data journaling mode"); - goto failed_mount3; - } - default: - break; - } - - /* - * The journal_load will have done any necessary log recovery, - * so we can safely mount the rest of the filesystem now. - */ - - root = ext3_iget(sb, EXT3_ROOT_INO); - if (IS_ERR(root)) { - ext3_msg(sb, KERN_ERR, "error: get root inode failed"); - ret = PTR_ERR(root); - goto failed_mount3; - } - if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) { - iput(root); - ext3_msg(sb, KERN_ERR, "error: corrupt root inode, run e2fsck"); - goto failed_mount3; - } - sb->s_root = d_make_root(root); - if (!sb->s_root) { - ext3_msg(sb, KERN_ERR, "error: get root dentry failed"); - ret = -ENOMEM; - goto failed_mount3; - } - - ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY); - - EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS; - ext3_orphan_cleanup(sb, es); - EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS; - if (needs_recovery) { - ext3_mark_recovery_complete(sb, es); - ext3_msg(sb, KERN_INFO, "recovery complete"); - } - ext3_msg(sb, KERN_INFO, "mounted filesystem with %s data mode", - test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal": - test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered": - "writeback"); - - return 0; - -cantfind_ext3: - if (!silent) - ext3_msg(sb, KERN_INFO, - "error: can't find ext3 filesystem on dev %s.", - sb->s_id); - goto failed_mount; - -failed_mount3: - percpu_counter_destroy(&sbi->s_freeblocks_counter); - percpu_counter_destroy(&sbi->s_freeinodes_counter); - percpu_counter_destroy(&sbi->s_dirs_counter); - journal_destroy(sbi->s_journal); -failed_mount2: - for (i = 0; i < db_count; i++) - brelse(sbi->s_group_desc[i]); - kfree(sbi->s_group_desc); -failed_mount: -#ifdef CONFIG_QUOTA - for (i = 0; i < MAXQUOTAS; i++) - kfree(sbi->s_qf_names[i]); -#endif - ext3_blkdev_remove(sbi); - brelse(bh); -out_fail: - sb->s_fs_info = NULL; - kfree(sbi->s_blockgroup_lock); - kfree(sbi); - return ret; -} - -/* - * Setup any per-fs journal parameters now. We'll do this both on - * initial mount, once the journal has been initialised but before we've - * done any recovery; and again on any subsequent remount. - */ -static void ext3_init_journal_params(struct super_block *sb, journal_t *journal) -{ - struct ext3_sb_info *sbi = EXT3_SB(sb); - - if (sbi->s_commit_interval) - journal->j_commit_interval = sbi->s_commit_interval; - /* We could also set up an ext3-specific default for the commit - * interval here, but for now we'll just fall back to the jbd - * default. */ - - spin_lock(&journal->j_state_lock); - if (test_opt(sb, BARRIER)) - journal->j_flags |= JFS_BARRIER; - else - journal->j_flags &= ~JFS_BARRIER; - if (test_opt(sb, DATA_ERR_ABORT)) - journal->j_flags |= JFS_ABORT_ON_SYNCDATA_ERR; - else - journal->j_flags &= ~JFS_ABORT_ON_SYNCDATA_ERR; - spin_unlock(&journal->j_state_lock); -} - -static journal_t *ext3_get_journal(struct super_block *sb, - unsigned int journal_inum) -{ - struct inode *journal_inode; - journal_t *journal; - - /* First, test for the existence of a valid inode on disk. Bad - * things happen if we iget() an unused inode, as the subsequent - * iput() will try to delete it. */ - - journal_inode = ext3_iget(sb, journal_inum); - if (IS_ERR(journal_inode)) { - ext3_msg(sb, KERN_ERR, "error: no journal found"); - return NULL; - } - if (!journal_inode->i_nlink) { - make_bad_inode(journal_inode); - iput(journal_inode); - ext3_msg(sb, KERN_ERR, "error: journal inode is deleted"); - return NULL; - } - - jbd_debug(2, "Journal inode found at %p: %Ld bytes\n", - journal_inode, journal_inode->i_size); - if (!S_ISREG(journal_inode->i_mode)) { - ext3_msg(sb, KERN_ERR, "error: invalid journal inode"); - iput(journal_inode); - return NULL; - } - - journal = journal_init_inode(journal_inode); - if (!journal) { - ext3_msg(sb, KERN_ERR, "error: could not load journal inode"); - iput(journal_inode); - return NULL; - } - journal->j_private = sb; - ext3_init_journal_params(sb, journal); - return journal; -} - -static journal_t *ext3_get_dev_journal(struct super_block *sb, - dev_t j_dev) -{ - struct buffer_head * bh; - journal_t *journal; - ext3_fsblk_t start; - ext3_fsblk_t len; - int hblock, blocksize; - ext3_fsblk_t sb_block; - unsigned long offset; - struct ext3_super_block * es; - struct block_device *bdev; - - bdev = ext3_blkdev_get(j_dev, sb); - if (bdev == NULL) - return NULL; - - blocksize = sb->s_blocksize; - hblock = bdev_logical_block_size(bdev); - if (blocksize < hblock) { - ext3_msg(sb, KERN_ERR, - "error: blocksize too small for journal device"); - goto out_bdev; - } - - sb_block = EXT3_MIN_BLOCK_SIZE / blocksize; - offset = EXT3_MIN_BLOCK_SIZE % blocksize; - set_blocksize(bdev, blocksize); - if (!(bh = __bread(bdev, sb_block, blocksize))) { - ext3_msg(sb, KERN_ERR, "error: couldn't read superblock of " - "external journal"); - goto out_bdev; - } - - es = (struct ext3_super_block *) (bh->b_data + offset); - if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) || - !(le32_to_cpu(es->s_feature_incompat) & - EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) { - ext3_msg(sb, KERN_ERR, "error: external journal has " - "bad superblock"); - brelse(bh); - goto out_bdev; - } - - if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) { - ext3_msg(sb, KERN_ERR, "error: journal UUID does not match"); - brelse(bh); - goto out_bdev; - } - - len = le32_to_cpu(es->s_blocks_count); - start = sb_block + 1; - brelse(bh); /* we're done with the superblock */ - - journal = journal_init_dev(bdev, sb->s_bdev, - start, len, blocksize); - if (!journal) { - ext3_msg(sb, KERN_ERR, - "error: failed to create device journal"); - goto out_bdev; - } - journal->j_private = sb; - if (!bh_uptodate_or_lock(journal->j_sb_buffer)) { - if (bh_submit_read(journal->j_sb_buffer)) { - ext3_msg(sb, KERN_ERR, "I/O error on journal device"); - goto out_journal; - } - } - if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) { - ext3_msg(sb, KERN_ERR, - "error: external journal has more than one " - "user (unsupported) - %d", - be32_to_cpu(journal->j_superblock->s_nr_users)); - goto out_journal; - } - EXT3_SB(sb)->journal_bdev = bdev; - ext3_init_journal_params(sb, journal); - return journal; -out_journal: - journal_destroy(journal); -out_bdev: - ext3_blkdev_put(bdev); - return NULL; -} - -static int ext3_load_journal(struct super_block *sb, - struct ext3_super_block *es, - unsigned long journal_devnum) -{ - journal_t *journal; - unsigned int journal_inum = le32_to_cpu(es->s_journal_inum); - dev_t journal_dev; - int err = 0; - int really_read_only; - - if (journal_devnum && - journal_devnum != le32_to_cpu(es->s_journal_dev)) { - ext3_msg(sb, KERN_INFO, "external journal device major/minor " - "numbers have changed"); - journal_dev = new_decode_dev(journal_devnum); - } else - journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev)); - - really_read_only = bdev_read_only(sb->s_bdev); - - /* - * Are we loading a blank journal or performing recovery after a - * crash? For recovery, we need to check in advance whether we - * can get read-write access to the device. - */ - - if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) { - if (sb->s_flags & MS_RDONLY) { - ext3_msg(sb, KERN_INFO, - "recovery required on readonly filesystem"); - if (really_read_only) { - ext3_msg(sb, KERN_ERR, "error: write access " - "unavailable, cannot proceed"); - return -EROFS; - } - ext3_msg(sb, KERN_INFO, - "write access will be enabled during recovery"); - } - } - - if (journal_inum && journal_dev) { - ext3_msg(sb, KERN_ERR, "error: filesystem has both journal " - "and inode journals"); - return -EINVAL; - } - - if (journal_inum) { - if (!(journal = ext3_get_journal(sb, journal_inum))) - return -EINVAL; - } else { - if (!(journal = ext3_get_dev_journal(sb, journal_dev))) - return -EINVAL; - } - - if (!(journal->j_flags & JFS_BARRIER)) - printk(KERN_INFO "EXT3-fs: barriers not enabled\n"); - - if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) { - err = journal_update_format(journal); - if (err) { - ext3_msg(sb, KERN_ERR, "error updating journal"); - journal_destroy(journal); - return err; - } - } - - if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) - err = journal_wipe(journal, !really_read_only); - if (!err) - err = journal_load(journal); - - if (err) { - ext3_msg(sb, KERN_ERR, "error loading journal"); - journal_destroy(journal); - return err; - } - - EXT3_SB(sb)->s_journal = journal; - ext3_clear_journal_err(sb, es); - - if (!really_read_only && journal_devnum && - journal_devnum != le32_to_cpu(es->s_journal_dev)) { - es->s_journal_dev = cpu_to_le32(journal_devnum); - - /* Make sure we flush the recovery flag to disk. */ - ext3_commit_super(sb, es, 1); - } - - return 0; -} - -static int ext3_create_journal(struct super_block *sb, - struct ext3_super_block *es, - unsigned int journal_inum) -{ - journal_t *journal; - int err; - - if (sb->s_flags & MS_RDONLY) { - ext3_msg(sb, KERN_ERR, - "error: readonly filesystem when trying to " - "create journal"); - return -EROFS; - } - - journal = ext3_get_journal(sb, journal_inum); - if (!journal) - return -EINVAL; - - ext3_msg(sb, KERN_INFO, "creating new journal on inode %u", - journal_inum); - - err = journal_create(journal); - if (err) { - ext3_msg(sb, KERN_ERR, "error creating journal"); - journal_destroy(journal); - return -EIO; - } - - EXT3_SB(sb)->s_journal = journal; - - ext3_update_dynamic_rev(sb); - EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL); - - es->s_journal_inum = cpu_to_le32(journal_inum); - - /* Make sure we flush the recovery flag to disk. */ - ext3_commit_super(sb, es, 1); - - return 0; -} - -static int ext3_commit_super(struct super_block *sb, - struct ext3_super_block *es, - int sync) -{ - struct buffer_head *sbh = EXT3_SB(sb)->s_sbh; - int error = 0; - - if (!sbh) - return error; - - if (buffer_write_io_error(sbh)) { - /* - * Oh, dear. A previous attempt to write the - * superblock failed. This could happen because the - * USB device was yanked out. Or it could happen to - * be a transient write error and maybe the block will - * be remapped. Nothing we can do but to retry the - * write and hope for the best. - */ - ext3_msg(sb, KERN_ERR, "previous I/O error to " - "superblock detected"); - clear_buffer_write_io_error(sbh); - set_buffer_uptodate(sbh); - } - /* - * If the file system is mounted read-only, don't update the - * superblock write time. This avoids updating the superblock - * write time when we are mounting the root file system - * read/only but we need to replay the journal; at that point, - * for people who are east of GMT and who make their clock - * tick in localtime for Windows bug-for-bug compatibility, - * the clock is set in the future, and this will cause e2fsck - * to complain and force a full file system check. - */ - if (!(sb->s_flags & MS_RDONLY)) - es->s_wtime = cpu_to_le32(get_seconds()); - es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb)); - es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb)); - BUFFER_TRACE(sbh, "marking dirty"); - mark_buffer_dirty(sbh); - if (sync) { - error = sync_dirty_buffer(sbh); - if (buffer_write_io_error(sbh)) { - ext3_msg(sb, KERN_ERR, "I/O error while writing " - "superblock"); - clear_buffer_write_io_error(sbh); - set_buffer_uptodate(sbh); - } - } - return error; -} - - -/* - * Have we just finished recovery? If so, and if we are mounting (or - * remounting) the filesystem readonly, then we will end up with a - * consistent fs on disk. Record that fact. - */ -static void ext3_mark_recovery_complete(struct super_block * sb, - struct ext3_super_block * es) -{ - journal_t *journal = EXT3_SB(sb)->s_journal; - - journal_lock_updates(journal); - if (journal_flush(journal) < 0) - goto out; - - if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && - sb->s_flags & MS_RDONLY) { - EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - ext3_commit_super(sb, es, 1); - } - -out: - journal_unlock_updates(journal); -} - -/* - * If we are mounting (or read-write remounting) a filesystem whose journal - * has recorded an error from a previous lifetime, move that error to the - * main filesystem now. - */ -static void ext3_clear_journal_err(struct super_block *sb, - struct ext3_super_block *es) -{ - journal_t *journal; - int j_errno; - const char *errstr; - - journal = EXT3_SB(sb)->s_journal; - - /* - * Now check for any error status which may have been recorded in the - * journal by a prior ext3_error() or ext3_abort() - */ - - j_errno = journal_errno(journal); - if (j_errno) { - char nbuf[16]; - - errstr = ext3_decode_error(sb, j_errno, nbuf); - ext3_warning(sb, __func__, "Filesystem error recorded " - "from previous mount: %s", errstr); - ext3_warning(sb, __func__, "Marking fs in need of " - "filesystem check."); - - EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; - es->s_state |= cpu_to_le16(EXT3_ERROR_FS); - ext3_commit_super (sb, es, 1); - - journal_clear_err(journal); - } -} - -/* - * Force the running and committing transactions to commit, - * and wait on the commit. - */ -int ext3_force_commit(struct super_block *sb) -{ - journal_t *journal; - int ret; - - if (sb->s_flags & MS_RDONLY) - return 0; - - journal = EXT3_SB(sb)->s_journal; - ret = ext3_journal_force_commit(journal); - return ret; -} - -static int ext3_sync_fs(struct super_block *sb, int wait) -{ - tid_t target; - - trace_ext3_sync_fs(sb, wait); - if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) { - if (wait) - log_wait_commit(EXT3_SB(sb)->s_journal, target); - } - return 0; -} - -/* - * LVM calls this function before a (read-only) snapshot is created. This - * gives us a chance to flush the journal completely and mark the fs clean. - */ -static int ext3_freeze(struct super_block *sb) -{ - int error = 0; - journal_t *journal; - - if (!(sb->s_flags & MS_RDONLY)) { - journal = EXT3_SB(sb)->s_journal; - - /* Now we set up the journal barrier. */ - journal_lock_updates(journal); - - /* - * We don't want to clear needs_recovery flag when we failed - * to flush the journal. - */ - error = journal_flush(journal); - if (error < 0) - goto out; - - /* Journal blocked and flushed, clear needs_recovery flag. */ - EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - error = ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); - if (error) - goto out; - } - return 0; - -out: - journal_unlock_updates(journal); - return error; -} - -/* - * Called by LVM after the snapshot is done. We need to reset the RECOVER - * flag here, even though the filesystem is not technically dirty yet. - */ -static int ext3_unfreeze(struct super_block *sb) -{ - if (!(sb->s_flags & MS_RDONLY)) { - lock_super(sb); - /* Reser the needs_recovery flag before the fs is unlocked. */ - EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); - ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); - unlock_super(sb); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - } - return 0; -} - -static int ext3_remount (struct super_block * sb, int * flags, char * data) -{ - struct ext3_super_block * es; - struct ext3_sb_info *sbi = EXT3_SB(sb); - ext3_fsblk_t n_blocks_count = 0; - unsigned long old_sb_flags; - struct ext3_mount_options old_opts; - int enable_quota = 0; - int err; -#ifdef CONFIG_QUOTA - int i; -#endif - - /* Store the original options */ - lock_super(sb); - old_sb_flags = sb->s_flags; - old_opts.s_mount_opt = sbi->s_mount_opt; - old_opts.s_resuid = sbi->s_resuid; - old_opts.s_resgid = sbi->s_resgid; - old_opts.s_commit_interval = sbi->s_commit_interval; -#ifdef CONFIG_QUOTA - old_opts.s_jquota_fmt = sbi->s_jquota_fmt; - for (i = 0; i < MAXQUOTAS; i++) - old_opts.s_qf_names[i] = sbi->s_qf_names[i]; -#endif - - /* - * Allow the "check" option to be passed as a remount option. - */ - if (!parse_options(data, sb, NULL, NULL, &n_blocks_count, 1)) { - err = -EINVAL; - goto restore_opts; - } - - if (test_opt(sb, ABORT)) - ext3_abort(sb, __func__, "Abort forced by user"); - - sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | - (test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0); - - es = sbi->s_es; - - ext3_init_journal_params(sb, sbi->s_journal); - - if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) || - n_blocks_count > le32_to_cpu(es->s_blocks_count)) { - if (test_opt(sb, ABORT)) { - err = -EROFS; - goto restore_opts; - } - - if (*flags & MS_RDONLY) { - err = dquot_suspend(sb, -1); - if (err < 0) - goto restore_opts; - - /* - * First of all, the unconditional stuff we have to do - * to disable replay of the journal when we next remount - */ - sb->s_flags |= MS_RDONLY; - - /* - * OK, test if we are remounting a valid rw partition - * readonly, and if so set the rdonly flag and then - * mark the partition as valid again. - */ - if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) && - (sbi->s_mount_state & EXT3_VALID_FS)) - es->s_state = cpu_to_le16(sbi->s_mount_state); - - ext3_mark_recovery_complete(sb, es); - } else { - __le32 ret; - if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb, - ~EXT3_FEATURE_RO_COMPAT_SUPP))) { - ext3_msg(sb, KERN_WARNING, - "warning: couldn't remount RDWR " - "because of unsupported optional " - "features (%x)", le32_to_cpu(ret)); - err = -EROFS; - goto restore_opts; - } - - /* - * If we have an unprocessed orphan list hanging - * around from a previously readonly bdev mount, - * require a full umount & mount for now. - */ - if (es->s_last_orphan) { - ext3_msg(sb, KERN_WARNING, "warning: couldn't " - "remount RDWR because of unprocessed " - "orphan inode list. Please " - "umount & mount instead."); - err = -EINVAL; - goto restore_opts; - } - - /* - * Mounting a RDONLY partition read-write, so reread - * and store the current valid flag. (It may have - * been changed by e2fsck since we originally mounted - * the partition.) - */ - ext3_clear_journal_err(sb, es); - sbi->s_mount_state = le16_to_cpu(es->s_state); - if ((err = ext3_group_extend(sb, es, n_blocks_count))) - goto restore_opts; - if (!ext3_setup_super (sb, es, 0)) - sb->s_flags &= ~MS_RDONLY; - enable_quota = 1; - } - } -#ifdef CONFIG_QUOTA - /* Release old quota file names */ - for (i = 0; i < MAXQUOTAS; i++) - if (old_opts.s_qf_names[i] && - old_opts.s_qf_names[i] != sbi->s_qf_names[i]) - kfree(old_opts.s_qf_names[i]); -#endif - unlock_super(sb); - - if (enable_quota) - dquot_resume(sb, -1); - return 0; -restore_opts: - sb->s_flags = old_sb_flags; - sbi->s_mount_opt = old_opts.s_mount_opt; - sbi->s_resuid = old_opts.s_resuid; - sbi->s_resgid = old_opts.s_resgid; - sbi->s_commit_interval = old_opts.s_commit_interval; -#ifdef CONFIG_QUOTA - sbi->s_jquota_fmt = old_opts.s_jquota_fmt; - for (i = 0; i < MAXQUOTAS; i++) { - if (sbi->s_qf_names[i] && - old_opts.s_qf_names[i] != sbi->s_qf_names[i]) - kfree(sbi->s_qf_names[i]); - sbi->s_qf_names[i] = old_opts.s_qf_names[i]; - } -#endif - unlock_super(sb); - return err; -} - -static int ext3_statfs (struct dentry * dentry, struct kstatfs * buf) -{ - struct super_block *sb = dentry->d_sb; - struct ext3_sb_info *sbi = EXT3_SB(sb); - struct ext3_super_block *es = sbi->s_es; - u64 fsid; - - if (test_opt(sb, MINIX_DF)) { - sbi->s_overhead_last = 0; - } else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) { - unsigned long ngroups = sbi->s_groups_count, i; - ext3_fsblk_t overhead = 0; - smp_rmb(); - - /* - * Compute the overhead (FS structures). This is constant - * for a given filesystem unless the number of block groups - * changes so we cache the previous value until it does. - */ - - /* - * All of the blocks before first_data_block are - * overhead - */ - overhead = le32_to_cpu(es->s_first_data_block); - - /* - * Add the overhead attributed to the superblock and - * block group descriptors. If the sparse superblocks - * feature is turned on, then not all groups have this. - */ - for (i = 0; i < ngroups; i++) { - overhead += ext3_bg_has_super(sb, i) + - ext3_bg_num_gdb(sb, i); - cond_resched(); - } - - /* - * Every block group has an inode bitmap, a block - * bitmap, and an inode table. - */ - overhead += ngroups * (2 + sbi->s_itb_per_group); - sbi->s_overhead_last = overhead; - smp_wmb(); - sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count); - } - - buf->f_type = EXT3_SUPER_MAGIC; - buf->f_bsize = sb->s_blocksize; - buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last; - buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter); - buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count); - if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count)) - buf->f_bavail = 0; - buf->f_files = le32_to_cpu(es->s_inodes_count); - buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter); - buf->f_namelen = EXT3_NAME_LEN; - fsid = le64_to_cpup((void *)es->s_uuid) ^ - le64_to_cpup((void *)es->s_uuid + sizeof(u64)); - buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL; - buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL; - return 0; -} - -/* Helper function for writing quotas on sync - we need to start transaction before quota file - * is locked for write. Otherwise the are possible deadlocks: - * Process 1 Process 2 - * ext3_create() quota_sync() - * journal_start() write_dquot() - * dquot_initialize() down(dqio_mutex) - * down(dqio_mutex) journal_start() - * - */ - -#ifdef CONFIG_QUOTA - -static inline struct inode *dquot_to_inode(struct dquot *dquot) -{ - return sb_dqopt(dquot->dq_sb)->files[dquot->dq_type]; -} - -static int ext3_write_dquot(struct dquot *dquot) -{ - int ret, err; - handle_t *handle; - struct inode *inode; - - inode = dquot_to_inode(dquot); - handle = ext3_journal_start(inode, - EXT3_QUOTA_TRANS_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - ret = dquot_commit(dquot); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -static int ext3_acquire_dquot(struct dquot *dquot) -{ - int ret, err; - handle_t *handle; - - handle = ext3_journal_start(dquot_to_inode(dquot), - EXT3_QUOTA_INIT_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) - return PTR_ERR(handle); - ret = dquot_acquire(dquot); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -static int ext3_release_dquot(struct dquot *dquot) -{ - int ret, err; - handle_t *handle; - - handle = ext3_journal_start(dquot_to_inode(dquot), - EXT3_QUOTA_DEL_BLOCKS(dquot->dq_sb)); - if (IS_ERR(handle)) { - /* Release dquot anyway to avoid endless cycle in dqput() */ - dquot_release(dquot); - return PTR_ERR(handle); - } - ret = dquot_release(dquot); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -static int ext3_mark_dquot_dirty(struct dquot *dquot) -{ - /* Are we journaling quotas? */ - if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] || - EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) { - dquot_mark_dquot_dirty(dquot); - return ext3_write_dquot(dquot); - } else { - return dquot_mark_dquot_dirty(dquot); - } -} - -static int ext3_write_info(struct super_block *sb, int type) -{ - int ret, err; - handle_t *handle; - - /* Data block + inode block */ - handle = ext3_journal_start(sb->s_root->d_inode, 2); - if (IS_ERR(handle)) - return PTR_ERR(handle); - ret = dquot_commit_info(sb, type); - err = ext3_journal_stop(handle); - if (!ret) - ret = err; - return ret; -} - -/* - * Turn on quotas during mount time - we need to find - * the quota file and such... - */ -static int ext3_quota_on_mount(struct super_block *sb, int type) -{ - return dquot_quota_on_mount(sb, EXT3_SB(sb)->s_qf_names[type], - EXT3_SB(sb)->s_jquota_fmt, type); -} - -/* - * Standard function to be called on quota_on - */ -static int ext3_quota_on(struct super_block *sb, int type, int format_id, - struct path *path) -{ - int err; - - if (!test_opt(sb, QUOTA)) - return -EINVAL; - - /* Quotafile not on the same filesystem? */ - if (path->dentry->d_sb != sb) - return -EXDEV; - /* Journaling quota? */ - if (EXT3_SB(sb)->s_qf_names[type]) { - /* Quotafile not of fs root? */ - if (path->dentry->d_parent != sb->s_root) - ext3_msg(sb, KERN_WARNING, - "warning: Quota file not on filesystem root. " - "Journaled quota will not work."); - } - - /* - * When we journal data on quota file, we have to flush journal to see - * all updates to the file when we bypass pagecache... - */ - if (ext3_should_journal_data(path->dentry->d_inode)) { - /* - * We don't need to lock updates but journal_flush() could - * otherwise be livelocked... - */ - journal_lock_updates(EXT3_SB(sb)->s_journal); - err = journal_flush(EXT3_SB(sb)->s_journal); - journal_unlock_updates(EXT3_SB(sb)->s_journal); - if (err) - return err; - } - - return dquot_quota_on(sb, type, format_id, path); -} - -/* Read data from quotafile - avoid pagecache and such because we cannot afford - * acquiring the locks... As quota files are never truncated and quota code - * itself serializes the operations (and no one else should touch the files) - * we don't have to be afraid of races */ -static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, - size_t len, loff_t off) -{ - struct inode *inode = sb_dqopt(sb)->files[type]; - sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); - int err = 0; - int offset = off & (sb->s_blocksize - 1); - int tocopy; - size_t toread; - struct buffer_head *bh; - loff_t i_size = i_size_read(inode); - - if (off > i_size) - return 0; - if (off+len > i_size) - len = i_size-off; - toread = len; - while (toread > 0) { - tocopy = sb->s_blocksize - offset < toread ? - sb->s_blocksize - offset : toread; - bh = ext3_bread(NULL, inode, blk, 0, &err); - if (err) - return err; - if (!bh) /* A hole? */ - memset(data, 0, tocopy); - else - memcpy(data, bh->b_data+offset, tocopy); - brelse(bh); - offset = 0; - toread -= tocopy; - data += tocopy; - blk++; - } - return len; -} - -/* Write to quotafile (we know the transaction is already started and has - * enough credits) */ -static ssize_t ext3_quota_write(struct super_block *sb, int type, - const char *data, size_t len, loff_t off) -{ - struct inode *inode = sb_dqopt(sb)->files[type]; - sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); - int err = 0; - int offset = off & (sb->s_blocksize - 1); - int journal_quota = EXT3_SB(sb)->s_qf_names[type] != NULL; - struct buffer_head *bh; - handle_t *handle = journal_current_handle(); - - if (!handle) { - ext3_msg(sb, KERN_WARNING, - "warning: quota write (off=%llu, len=%llu)" - " cancelled because transaction is not started.", - (unsigned long long)off, (unsigned long long)len); - return -EIO; - } - - /* - * Since we account only one data block in transaction credits, - * then it is impossible to cross a block boundary. - */ - if (sb->s_blocksize - offset < len) { - ext3_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)" - " cancelled because not block aligned", - (unsigned long long)off, (unsigned long long)len); - return -EIO; - } - mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); - bh = ext3_bread(handle, inode, blk, 1, &err); - if (!bh) - goto out; - if (journal_quota) { - err = ext3_journal_get_write_access(handle, bh); - if (err) { - brelse(bh); - goto out; - } - } - lock_buffer(bh); - memcpy(bh->b_data+offset, data, len); - flush_dcache_page(bh->b_page); - unlock_buffer(bh); - if (journal_quota) - err = ext3_journal_dirty_metadata(handle, bh); - else { - /* Always do at least ordered writes for quotas */ - err = ext3_journal_dirty_data(handle, bh); - mark_buffer_dirty(bh); - } - brelse(bh); -out: - if (err) { - mutex_unlock(&inode->i_mutex); - return err; - } - if (inode->i_size < off + len) { - i_size_write(inode, off + len); - EXT3_I(inode)->i_disksize = inode->i_size; - } - inode->i_version++; - inode->i_mtime = inode->i_ctime = CURRENT_TIME; - ext3_mark_inode_dirty(handle, inode); - mutex_unlock(&inode->i_mutex); - return len; -} - -#endif - -static struct dentry *ext3_mount(struct file_system_type *fs_type, - int flags, const char *dev_name, void *data) -{ - return mount_bdev(fs_type, flags, dev_name, data, ext3_fill_super); -} - -static struct file_system_type ext3_fs_type = { - .owner = THIS_MODULE, - .name = "ext3", - .mount = ext3_mount, - .kill_sb = kill_block_super, - .fs_flags = FS_REQUIRES_DEV, -}; - -static int __init init_ext3_fs(void) -{ - int err = init_ext3_xattr(); - if (err) - return err; - err = init_inodecache(); - if (err) - goto out1; - err = register_filesystem(&ext3_fs_type); - if (err) - goto out; - return 0; -out: - destroy_inodecache(); -out1: - exit_ext3_xattr(); - return err; -} - -static void __exit exit_ext3_fs(void) -{ - unregister_filesystem(&ext3_fs_type); - destroy_inodecache(); - exit_ext3_xattr(); -} - -MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); -MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions"); -MODULE_LICENSE("GPL"); -module_init(init_ext3_fs) -module_exit(exit_ext3_fs) diff --git a/ANDROID_3.4.5/fs/ext3/symlink.c b/ANDROID_3.4.5/fs/ext3/symlink.c deleted file mode 100644 index 6b01c3ea..00000000 --- a/ANDROID_3.4.5/fs/ext3/symlink.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/fs/ext3/symlink.c - * - * Only fast symlinks left here - the rest is done by generic code. AV, 1999 - * - * Copyright (C) 1992, 1993, 1994, 1995 - * Remy Card (card@masi.ibp.fr) - * Laboratoire MASI - Institut Blaise Pascal - * Universite Pierre et Marie Curie (Paris VI) - * - * from - * - * linux/fs/minix/symlink.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * ext3 symlink handling code - */ - -#include <linux/namei.h> -#include "ext3.h" -#include "xattr.h" - -static void * ext3_follow_link(struct dentry *dentry, struct nameidata *nd) -{ - struct ext3_inode_info *ei = EXT3_I(dentry->d_inode); - nd_set_link(nd, (char*)ei->i_data); - return NULL; -} - -const struct inode_operations ext3_symlink_inode_operations = { - .readlink = generic_readlink, - .follow_link = page_follow_link_light, - .put_link = page_put_link, - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif -}; - -const struct inode_operations ext3_fast_symlink_inode_operations = { - .readlink = generic_readlink, - .follow_link = ext3_follow_link, - .setattr = ext3_setattr, -#ifdef CONFIG_EXT3_FS_XATTR - .setxattr = generic_setxattr, - .getxattr = generic_getxattr, - .listxattr = ext3_listxattr, - .removexattr = generic_removexattr, -#endif -}; diff --git a/ANDROID_3.4.5/fs/ext3/xattr.c b/ANDROID_3.4.5/fs/ext3/xattr.c deleted file mode 100644 index d22ebb7a..00000000 --- a/ANDROID_3.4.5/fs/ext3/xattr.c +++ /dev/null @@ -1,1331 +0,0 @@ -/* - * linux/fs/ext3/xattr.c - * - * Copyright (C) 2001-2003 Andreas Gruenbacher, <agruen@suse.de> - * - * Fix by Harrison Xing <harrison@mountainviewdata.com>. - * Ext3 code with a lot of help from Eric Jarman <ejarman@acm.org>. - * Extended attributes for symlinks and special files added per - * suggestion of Luka Renko <luka.renko@hermes.si>. - * xattr consolidation Copyright (c) 2004 James Morris <jmorris@redhat.com>, - * Red Hat Inc. - * ea-in-inode support by Alex Tomas <alex@clusterfs.com> aka bzzz - * and Andreas Gruenbacher <agruen@suse.de>. - */ - -/* - * Extended attributes are stored directly in inodes (on file systems with - * inodes bigger than 128 bytes) and on additional disk blocks. The i_file_acl - * field contains the block number if an inode uses an additional block. All - * attributes must fit in the inode and one additional block. Blocks that - * contain the identical set of attributes may be shared among several inodes. - * Identical blocks are detected by keeping a cache of blocks that have - * recently been accessed. - * - * The attributes in inodes and on blocks have a different header; the entries - * are stored in the same format: - * - * +------------------+ - * | header | - * | entry 1 | | - * | entry 2 | | growing downwards - * | entry 3 | v - * | four null bytes | - * | . . . | - * | value 1 | ^ - * | value 3 | | growing upwards - * | value 2 | | - * +------------------+ - * - * The header is followed by multiple entry descriptors. In disk blocks, the - * entry descriptors are kept sorted. In inodes, they are unsorted. The - * attribute values are aligned to the end of the block in no specific order. - * - * Locking strategy - * ---------------- - * EXT3_I(inode)->i_file_acl is protected by EXT3_I(inode)->xattr_sem. - * EA blocks are only changed if they are exclusive to an inode, so - * holding xattr_sem also means that nothing but the EA block's reference - * count can change. Multiple writers to the same block are synchronized - * by the buffer lock. - */ - -#include "ext3.h" -#include <linux/mbcache.h> -#include <linux/quotaops.h> -#include "xattr.h" -#include "acl.h" - -#define BHDR(bh) ((struct ext3_xattr_header *)((bh)->b_data)) -#define ENTRY(ptr) ((struct ext3_xattr_entry *)(ptr)) -#define BFIRST(bh) ENTRY(BHDR(bh)+1) -#define IS_LAST_ENTRY(entry) (*(__u32 *)(entry) == 0) - -#define IHDR(inode, raw_inode) \ - ((struct ext3_xattr_ibody_header *) \ - ((void *)raw_inode + \ - EXT3_GOOD_OLD_INODE_SIZE + \ - EXT3_I(inode)->i_extra_isize)) -#define IFIRST(hdr) ((struct ext3_xattr_entry *)((hdr)+1)) - -#ifdef EXT3_XATTR_DEBUG -# define ea_idebug(inode, f...) do { \ - printk(KERN_DEBUG "inode %s:%lu: ", \ - inode->i_sb->s_id, inode->i_ino); \ - printk(f); \ - printk("\n"); \ - } while (0) -# define ea_bdebug(bh, f...) do { \ - char b[BDEVNAME_SIZE]; \ - printk(KERN_DEBUG "block %s:%lu: ", \ - bdevname(bh->b_bdev, b), \ - (unsigned long) bh->b_blocknr); \ - printk(f); \ - printk("\n"); \ - } while (0) -#else -# define ea_idebug(f...) -# define ea_bdebug(f...) -#endif - -static void ext3_xattr_cache_insert(struct buffer_head *); -static struct buffer_head *ext3_xattr_cache_find(struct inode *, - struct ext3_xattr_header *, - struct mb_cache_entry **); -static void ext3_xattr_rehash(struct ext3_xattr_header *, - struct ext3_xattr_entry *); -static int ext3_xattr_list(struct dentry *dentry, char *buffer, - size_t buffer_size); - -static struct mb_cache *ext3_xattr_cache; - -static const struct xattr_handler *ext3_xattr_handler_map[] = { - [EXT3_XATTR_INDEX_USER] = &ext3_xattr_user_handler, -#ifdef CONFIG_EXT3_FS_POSIX_ACL - [EXT3_XATTR_INDEX_POSIX_ACL_ACCESS] = &ext3_xattr_acl_access_handler, - [EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT] = &ext3_xattr_acl_default_handler, -#endif - [EXT3_XATTR_INDEX_TRUSTED] = &ext3_xattr_trusted_handler, -#ifdef CONFIG_EXT3_FS_SECURITY - [EXT3_XATTR_INDEX_SECURITY] = &ext3_xattr_security_handler, -#endif -}; - -const struct xattr_handler *ext3_xattr_handlers[] = { - &ext3_xattr_user_handler, - &ext3_xattr_trusted_handler, -#ifdef CONFIG_EXT3_FS_POSIX_ACL - &ext3_xattr_acl_access_handler, - &ext3_xattr_acl_default_handler, -#endif -#ifdef CONFIG_EXT3_FS_SECURITY - &ext3_xattr_security_handler, -#endif - NULL -}; - -static inline const struct xattr_handler * -ext3_xattr_handler(int name_index) -{ - const struct xattr_handler *handler = NULL; - - if (name_index > 0 && name_index < ARRAY_SIZE(ext3_xattr_handler_map)) - handler = ext3_xattr_handler_map[name_index]; - return handler; -} - -/* - * Inode operation listxattr() - * - * dentry->d_inode->i_mutex: don't care - */ -ssize_t -ext3_listxattr(struct dentry *dentry, char *buffer, size_t size) -{ - return ext3_xattr_list(dentry, buffer, size); -} - -static int -ext3_xattr_check_names(struct ext3_xattr_entry *entry, void *end) -{ - while (!IS_LAST_ENTRY(entry)) { - struct ext3_xattr_entry *next = EXT3_XATTR_NEXT(entry); - if ((void *)next >= end) - return -EIO; - entry = next; - } - return 0; -} - -static inline int -ext3_xattr_check_block(struct buffer_head *bh) -{ - int error; - - if (BHDR(bh)->h_magic != cpu_to_le32(EXT3_XATTR_MAGIC) || - BHDR(bh)->h_blocks != cpu_to_le32(1)) - return -EIO; - error = ext3_xattr_check_names(BFIRST(bh), bh->b_data + bh->b_size); - return error; -} - -static inline int -ext3_xattr_check_entry(struct ext3_xattr_entry *entry, size_t size) -{ - size_t value_size = le32_to_cpu(entry->e_value_size); - - if (entry->e_value_block != 0 || value_size > size || - le16_to_cpu(entry->e_value_offs) + value_size > size) - return -EIO; - return 0; -} - -static int -ext3_xattr_find_entry(struct ext3_xattr_entry **pentry, int name_index, - const char *name, size_t size, int sorted) -{ - struct ext3_xattr_entry *entry; - size_t name_len; - int cmp = 1; - - if (name == NULL) - return -EINVAL; - name_len = strlen(name); - entry = *pentry; - for (; !IS_LAST_ENTRY(entry); entry = EXT3_XATTR_NEXT(entry)) { - cmp = name_index - entry->e_name_index; - if (!cmp) - cmp = name_len - entry->e_name_len; - if (!cmp) - cmp = memcmp(name, entry->e_name, name_len); - if (cmp <= 0 && (sorted || cmp == 0)) - break; - } - *pentry = entry; - if (!cmp && ext3_xattr_check_entry(entry, size)) - return -EIO; - return cmp ? -ENODATA : 0; -} - -static int -ext3_xattr_block_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t buffer_size) -{ - struct buffer_head *bh = NULL; - struct ext3_xattr_entry *entry; - size_t size; - int error; - - ea_idebug(inode, "name=%d.%s, buffer=%p, buffer_size=%ld", - name_index, name, buffer, (long)buffer_size); - - error = -ENODATA; - if (!EXT3_I(inode)->i_file_acl) - goto cleanup; - ea_idebug(inode, "reading block %u", EXT3_I(inode)->i_file_acl); - bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl); - if (!bh) - goto cleanup; - ea_bdebug(bh, "b_count=%d, refcount=%d", - atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount)); - if (ext3_xattr_check_block(bh)) { -bad_block: ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - error = -EIO; - goto cleanup; - } - ext3_xattr_cache_insert(bh); - entry = BFIRST(bh); - error = ext3_xattr_find_entry(&entry, name_index, name, bh->b_size, 1); - if (error == -EIO) - goto bad_block; - if (error) - goto cleanup; - size = le32_to_cpu(entry->e_value_size); - if (buffer) { - error = -ERANGE; - if (size > buffer_size) - goto cleanup; - memcpy(buffer, bh->b_data + le16_to_cpu(entry->e_value_offs), - size); - } - error = size; - -cleanup: - brelse(bh); - return error; -} - -static int -ext3_xattr_ibody_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t buffer_size) -{ - struct ext3_xattr_ibody_header *header; - struct ext3_xattr_entry *entry; - struct ext3_inode *raw_inode; - struct ext3_iloc iloc; - size_t size; - void *end; - int error; - - if (!ext3_test_inode_state(inode, EXT3_STATE_XATTR)) - return -ENODATA; - error = ext3_get_inode_loc(inode, &iloc); - if (error) - return error; - raw_inode = ext3_raw_inode(&iloc); - header = IHDR(inode, raw_inode); - entry = IFIRST(header); - end = (void *)raw_inode + EXT3_SB(inode->i_sb)->s_inode_size; - error = ext3_xattr_check_names(entry, end); - if (error) - goto cleanup; - error = ext3_xattr_find_entry(&entry, name_index, name, - end - (void *)entry, 0); - if (error) - goto cleanup; - size = le32_to_cpu(entry->e_value_size); - if (buffer) { - error = -ERANGE; - if (size > buffer_size) - goto cleanup; - memcpy(buffer, (void *)IFIRST(header) + - le16_to_cpu(entry->e_value_offs), size); - } - error = size; - -cleanup: - brelse(iloc.bh); - return error; -} - -/* - * ext3_xattr_get() - * - * Copy an extended attribute into the buffer - * provided, or compute the buffer size required. - * Buffer is NULL to compute the size of the buffer required. - * - * Returns a negative error number on failure, or the number of bytes - * used / required on success. - */ -int -ext3_xattr_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t buffer_size) -{ - int error; - - down_read(&EXT3_I(inode)->xattr_sem); - error = ext3_xattr_ibody_get(inode, name_index, name, buffer, - buffer_size); - if (error == -ENODATA) - error = ext3_xattr_block_get(inode, name_index, name, buffer, - buffer_size); - up_read(&EXT3_I(inode)->xattr_sem); - return error; -} - -static int -ext3_xattr_list_entries(struct dentry *dentry, struct ext3_xattr_entry *entry, - char *buffer, size_t buffer_size) -{ - size_t rest = buffer_size; - - for (; !IS_LAST_ENTRY(entry); entry = EXT3_XATTR_NEXT(entry)) { - const struct xattr_handler *handler = - ext3_xattr_handler(entry->e_name_index); - - if (handler) { - size_t size = handler->list(dentry, buffer, rest, - entry->e_name, - entry->e_name_len, - handler->flags); - if (buffer) { - if (size > rest) - return -ERANGE; - buffer += size; - } - rest -= size; - } - } - return buffer_size - rest; -} - -static int -ext3_xattr_block_list(struct dentry *dentry, char *buffer, size_t buffer_size) -{ - struct inode *inode = dentry->d_inode; - struct buffer_head *bh = NULL; - int error; - - ea_idebug(inode, "buffer=%p, buffer_size=%ld", - buffer, (long)buffer_size); - - error = 0; - if (!EXT3_I(inode)->i_file_acl) - goto cleanup; - ea_idebug(inode, "reading block %u", EXT3_I(inode)->i_file_acl); - bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl); - error = -EIO; - if (!bh) - goto cleanup; - ea_bdebug(bh, "b_count=%d, refcount=%d", - atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount)); - if (ext3_xattr_check_block(bh)) { - ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - error = -EIO; - goto cleanup; - } - ext3_xattr_cache_insert(bh); - error = ext3_xattr_list_entries(dentry, BFIRST(bh), buffer, buffer_size); - -cleanup: - brelse(bh); - - return error; -} - -static int -ext3_xattr_ibody_list(struct dentry *dentry, char *buffer, size_t buffer_size) -{ - struct inode *inode = dentry->d_inode; - struct ext3_xattr_ibody_header *header; - struct ext3_inode *raw_inode; - struct ext3_iloc iloc; - void *end; - int error; - - if (!ext3_test_inode_state(inode, EXT3_STATE_XATTR)) - return 0; - error = ext3_get_inode_loc(inode, &iloc); - if (error) - return error; - raw_inode = ext3_raw_inode(&iloc); - header = IHDR(inode, raw_inode); - end = (void *)raw_inode + EXT3_SB(inode->i_sb)->s_inode_size; - error = ext3_xattr_check_names(IFIRST(header), end); - if (error) - goto cleanup; - error = ext3_xattr_list_entries(dentry, IFIRST(header), - buffer, buffer_size); - -cleanup: - brelse(iloc.bh); - return error; -} - -/* - * ext3_xattr_list() - * - * Copy a list of attribute names into the buffer - * provided, or compute the buffer size required. - * Buffer is NULL to compute the size of the buffer required. - * - * Returns a negative error number on failure, or the number of bytes - * used / required on success. - */ -static int -ext3_xattr_list(struct dentry *dentry, char *buffer, size_t buffer_size) -{ - int i_error, b_error; - - down_read(&EXT3_I(dentry->d_inode)->xattr_sem); - i_error = ext3_xattr_ibody_list(dentry, buffer, buffer_size); - if (i_error < 0) { - b_error = 0; - } else { - if (buffer) { - buffer += i_error; - buffer_size -= i_error; - } - b_error = ext3_xattr_block_list(dentry, buffer, buffer_size); - if (b_error < 0) - i_error = 0; - } - up_read(&EXT3_I(dentry->d_inode)->xattr_sem); - return i_error + b_error; -} - -/* - * If the EXT3_FEATURE_COMPAT_EXT_ATTR feature of this file system is - * not set, set it. - */ -static void ext3_xattr_update_super_block(handle_t *handle, - struct super_block *sb) -{ - if (EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_EXT_ATTR)) - return; - - if (ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh) == 0) { - EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_EXT_ATTR); - ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh); - } -} - -/* - * Release the xattr block BH: If the reference count is > 1, decrement - * it; otherwise free the block. - */ -static void -ext3_xattr_release_block(handle_t *handle, struct inode *inode, - struct buffer_head *bh) -{ - struct mb_cache_entry *ce = NULL; - int error = 0; - - ce = mb_cache_entry_get(ext3_xattr_cache, bh->b_bdev, bh->b_blocknr); - error = ext3_journal_get_write_access(handle, bh); - if (error) - goto out; - - lock_buffer(bh); - - if (BHDR(bh)->h_refcount == cpu_to_le32(1)) { - ea_bdebug(bh, "refcount now=0; freeing"); - if (ce) - mb_cache_entry_free(ce); - ext3_free_blocks(handle, inode, bh->b_blocknr, 1); - get_bh(bh); - ext3_forget(handle, 1, inode, bh, bh->b_blocknr); - } else { - le32_add_cpu(&BHDR(bh)->h_refcount, -1); - error = ext3_journal_dirty_metadata(handle, bh); - if (IS_SYNC(inode)) - handle->h_sync = 1; - dquot_free_block(inode, 1); - ea_bdebug(bh, "refcount now=%d; releasing", - le32_to_cpu(BHDR(bh)->h_refcount)); - if (ce) - mb_cache_entry_release(ce); - } - unlock_buffer(bh); -out: - ext3_std_error(inode->i_sb, error); - return; -} - -struct ext3_xattr_info { - int name_index; - const char *name; - const void *value; - size_t value_len; -}; - -struct ext3_xattr_search { - struct ext3_xattr_entry *first; - void *base; - void *end; - struct ext3_xattr_entry *here; - int not_found; -}; - -static int -ext3_xattr_set_entry(struct ext3_xattr_info *i, struct ext3_xattr_search *s) -{ - struct ext3_xattr_entry *last; - size_t free, min_offs = s->end - s->base, name_len = strlen(i->name); - - /* Compute min_offs and last. */ - last = s->first; - for (; !IS_LAST_ENTRY(last); last = EXT3_XATTR_NEXT(last)) { - if (!last->e_value_block && last->e_value_size) { - size_t offs = le16_to_cpu(last->e_value_offs); - if (offs < min_offs) - min_offs = offs; - } - } - free = min_offs - ((void *)last - s->base) - sizeof(__u32); - if (!s->not_found) { - if (!s->here->e_value_block && s->here->e_value_size) { - size_t size = le32_to_cpu(s->here->e_value_size); - free += EXT3_XATTR_SIZE(size); - } - free += EXT3_XATTR_LEN(name_len); - } - if (i->value) { - if (free < EXT3_XATTR_SIZE(i->value_len) || - free < EXT3_XATTR_LEN(name_len) + - EXT3_XATTR_SIZE(i->value_len)) - return -ENOSPC; - } - - if (i->value && s->not_found) { - /* Insert the new name. */ - size_t size = EXT3_XATTR_LEN(name_len); - size_t rest = (void *)last - (void *)s->here + sizeof(__u32); - memmove((void *)s->here + size, s->here, rest); - memset(s->here, 0, size); - s->here->e_name_index = i->name_index; - s->here->e_name_len = name_len; - memcpy(s->here->e_name, i->name, name_len); - } else { - if (!s->here->e_value_block && s->here->e_value_size) { - void *first_val = s->base + min_offs; - size_t offs = le16_to_cpu(s->here->e_value_offs); - void *val = s->base + offs; - size_t size = EXT3_XATTR_SIZE( - le32_to_cpu(s->here->e_value_size)); - - if (i->value && size == EXT3_XATTR_SIZE(i->value_len)) { - /* The old and the new value have the same - size. Just replace. */ - s->here->e_value_size = - cpu_to_le32(i->value_len); - memset(val + size - EXT3_XATTR_PAD, 0, - EXT3_XATTR_PAD); /* Clear pad bytes. */ - memcpy(val, i->value, i->value_len); - return 0; - } - - /* Remove the old value. */ - memmove(first_val + size, first_val, val - first_val); - memset(first_val, 0, size); - s->here->e_value_size = 0; - s->here->e_value_offs = 0; - min_offs += size; - - /* Adjust all value offsets. */ - last = s->first; - while (!IS_LAST_ENTRY(last)) { - size_t o = le16_to_cpu(last->e_value_offs); - if (!last->e_value_block && - last->e_value_size && o < offs) - last->e_value_offs = - cpu_to_le16(o + size); - last = EXT3_XATTR_NEXT(last); - } - } - if (!i->value) { - /* Remove the old name. */ - size_t size = EXT3_XATTR_LEN(name_len); - last = ENTRY((void *)last - size); - memmove(s->here, (void *)s->here + size, - (void *)last - (void *)s->here + sizeof(__u32)); - memset(last, 0, size); - } - } - - if (i->value) { - /* Insert the new value. */ - s->here->e_value_size = cpu_to_le32(i->value_len); - if (i->value_len) { - size_t size = EXT3_XATTR_SIZE(i->value_len); - void *val = s->base + min_offs - size; - s->here->e_value_offs = cpu_to_le16(min_offs - size); - memset(val + size - EXT3_XATTR_PAD, 0, - EXT3_XATTR_PAD); /* Clear the pad bytes. */ - memcpy(val, i->value, i->value_len); - } - } - return 0; -} - -struct ext3_xattr_block_find { - struct ext3_xattr_search s; - struct buffer_head *bh; -}; - -static int -ext3_xattr_block_find(struct inode *inode, struct ext3_xattr_info *i, - struct ext3_xattr_block_find *bs) -{ - struct super_block *sb = inode->i_sb; - int error; - - ea_idebug(inode, "name=%d.%s, value=%p, value_len=%ld", - i->name_index, i->name, i->value, (long)i->value_len); - - if (EXT3_I(inode)->i_file_acl) { - /* The inode already has an extended attribute block. */ - bs->bh = sb_bread(sb, EXT3_I(inode)->i_file_acl); - error = -EIO; - if (!bs->bh) - goto cleanup; - ea_bdebug(bs->bh, "b_count=%d, refcount=%d", - atomic_read(&(bs->bh->b_count)), - le32_to_cpu(BHDR(bs->bh)->h_refcount)); - if (ext3_xattr_check_block(bs->bh)) { - ext3_error(sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - error = -EIO; - goto cleanup; - } - /* Find the named attribute. */ - bs->s.base = BHDR(bs->bh); - bs->s.first = BFIRST(bs->bh); - bs->s.end = bs->bh->b_data + bs->bh->b_size; - bs->s.here = bs->s.first; - error = ext3_xattr_find_entry(&bs->s.here, i->name_index, - i->name, bs->bh->b_size, 1); - if (error && error != -ENODATA) - goto cleanup; - bs->s.not_found = error; - } - error = 0; - -cleanup: - return error; -} - -static int -ext3_xattr_block_set(handle_t *handle, struct inode *inode, - struct ext3_xattr_info *i, - struct ext3_xattr_block_find *bs) -{ - struct super_block *sb = inode->i_sb; - struct buffer_head *new_bh = NULL; - struct ext3_xattr_search *s = &bs->s; - struct mb_cache_entry *ce = NULL; - int error = 0; - -#define header(x) ((struct ext3_xattr_header *)(x)) - - if (i->value && i->value_len > sb->s_blocksize) - return -ENOSPC; - if (s->base) { - ce = mb_cache_entry_get(ext3_xattr_cache, bs->bh->b_bdev, - bs->bh->b_blocknr); - error = ext3_journal_get_write_access(handle, bs->bh); - if (error) - goto cleanup; - lock_buffer(bs->bh); - - if (header(s->base)->h_refcount == cpu_to_le32(1)) { - if (ce) { - mb_cache_entry_free(ce); - ce = NULL; - } - ea_bdebug(bs->bh, "modifying in-place"); - error = ext3_xattr_set_entry(i, s); - if (!error) { - if (!IS_LAST_ENTRY(s->first)) - ext3_xattr_rehash(header(s->base), - s->here); - ext3_xattr_cache_insert(bs->bh); - } - unlock_buffer(bs->bh); - if (error == -EIO) - goto bad_block; - if (!error) - error = ext3_journal_dirty_metadata(handle, - bs->bh); - if (error) - goto cleanup; - goto inserted; - } else { - int offset = (char *)s->here - bs->bh->b_data; - - unlock_buffer(bs->bh); - journal_release_buffer(handle, bs->bh); - - if (ce) { - mb_cache_entry_release(ce); - ce = NULL; - } - ea_bdebug(bs->bh, "cloning"); - s->base = kmalloc(bs->bh->b_size, GFP_NOFS); - error = -ENOMEM; - if (s->base == NULL) - goto cleanup; - memcpy(s->base, BHDR(bs->bh), bs->bh->b_size); - s->first = ENTRY(header(s->base)+1); - header(s->base)->h_refcount = cpu_to_le32(1); - s->here = ENTRY(s->base + offset); - s->end = s->base + bs->bh->b_size; - } - } else { - /* Allocate a buffer where we construct the new block. */ - s->base = kzalloc(sb->s_blocksize, GFP_NOFS); - /* assert(header == s->base) */ - error = -ENOMEM; - if (s->base == NULL) - goto cleanup; - header(s->base)->h_magic = cpu_to_le32(EXT3_XATTR_MAGIC); - header(s->base)->h_blocks = cpu_to_le32(1); - header(s->base)->h_refcount = cpu_to_le32(1); - s->first = ENTRY(header(s->base)+1); - s->here = ENTRY(header(s->base)+1); - s->end = s->base + sb->s_blocksize; - } - - error = ext3_xattr_set_entry(i, s); - if (error == -EIO) - goto bad_block; - if (error) - goto cleanup; - if (!IS_LAST_ENTRY(s->first)) - ext3_xattr_rehash(header(s->base), s->here); - -inserted: - if (!IS_LAST_ENTRY(s->first)) { - new_bh = ext3_xattr_cache_find(inode, header(s->base), &ce); - if (new_bh) { - /* We found an identical block in the cache. */ - if (new_bh == bs->bh) - ea_bdebug(new_bh, "keeping"); - else { - /* The old block is released after updating - the inode. */ - error = dquot_alloc_block(inode, 1); - if (error) - goto cleanup; - error = ext3_journal_get_write_access(handle, - new_bh); - if (error) - goto cleanup_dquot; - lock_buffer(new_bh); - le32_add_cpu(&BHDR(new_bh)->h_refcount, 1); - ea_bdebug(new_bh, "reusing; refcount now=%d", - le32_to_cpu(BHDR(new_bh)->h_refcount)); - unlock_buffer(new_bh); - error = ext3_journal_dirty_metadata(handle, - new_bh); - if (error) - goto cleanup_dquot; - } - mb_cache_entry_release(ce); - ce = NULL; - } else if (bs->bh && s->base == bs->bh->b_data) { - /* We were modifying this block in-place. */ - ea_bdebug(bs->bh, "keeping this block"); - new_bh = bs->bh; - get_bh(new_bh); - } else { - /* We need to allocate a new block */ - ext3_fsblk_t goal = ext3_group_first_block_no(sb, - EXT3_I(inode)->i_block_group); - ext3_fsblk_t block; - - /* - * Protect us agaist concurrent allocations to the - * same inode from ext3_..._writepage(). Reservation - * code does not expect racing allocations. - */ - mutex_lock(&EXT3_I(inode)->truncate_mutex); - block = ext3_new_block(handle, inode, goal, &error); - mutex_unlock(&EXT3_I(inode)->truncate_mutex); - if (error) - goto cleanup; - ea_idebug(inode, "creating block %d", block); - - new_bh = sb_getblk(sb, block); - if (!new_bh) { -getblk_failed: - ext3_free_blocks(handle, inode, block, 1); - error = -EIO; - goto cleanup; - } - lock_buffer(new_bh); - error = ext3_journal_get_create_access(handle, new_bh); - if (error) { - unlock_buffer(new_bh); - goto getblk_failed; - } - memcpy(new_bh->b_data, s->base, new_bh->b_size); - set_buffer_uptodate(new_bh); - unlock_buffer(new_bh); - ext3_xattr_cache_insert(new_bh); - error = ext3_journal_dirty_metadata(handle, new_bh); - if (error) - goto cleanup; - } - } - - /* Update the inode. */ - EXT3_I(inode)->i_file_acl = new_bh ? new_bh->b_blocknr : 0; - - /* Drop the previous xattr block. */ - if (bs->bh && bs->bh != new_bh) - ext3_xattr_release_block(handle, inode, bs->bh); - error = 0; - -cleanup: - if (ce) - mb_cache_entry_release(ce); - brelse(new_bh); - if (!(bs->bh && s->base == bs->bh->b_data)) - kfree(s->base); - - return error; - -cleanup_dquot: - dquot_free_block(inode, 1); - goto cleanup; - -bad_block: - ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - goto cleanup; - -#undef header -} - -struct ext3_xattr_ibody_find { - struct ext3_xattr_search s; - struct ext3_iloc iloc; -}; - -static int -ext3_xattr_ibody_find(struct inode *inode, struct ext3_xattr_info *i, - struct ext3_xattr_ibody_find *is) -{ - struct ext3_xattr_ibody_header *header; - struct ext3_inode *raw_inode; - int error; - - if (EXT3_I(inode)->i_extra_isize == 0) - return 0; - raw_inode = ext3_raw_inode(&is->iloc); - header = IHDR(inode, raw_inode); - is->s.base = is->s.first = IFIRST(header); - is->s.here = is->s.first; - is->s.end = (void *)raw_inode + EXT3_SB(inode->i_sb)->s_inode_size; - if (ext3_test_inode_state(inode, EXT3_STATE_XATTR)) { - error = ext3_xattr_check_names(IFIRST(header), is->s.end); - if (error) - return error; - /* Find the named attribute. */ - error = ext3_xattr_find_entry(&is->s.here, i->name_index, - i->name, is->s.end - - (void *)is->s.base, 0); - if (error && error != -ENODATA) - return error; - is->s.not_found = error; - } - return 0; -} - -static int -ext3_xattr_ibody_set(handle_t *handle, struct inode *inode, - struct ext3_xattr_info *i, - struct ext3_xattr_ibody_find *is) -{ - struct ext3_xattr_ibody_header *header; - struct ext3_xattr_search *s = &is->s; - int error; - - if (EXT3_I(inode)->i_extra_isize == 0) - return -ENOSPC; - error = ext3_xattr_set_entry(i, s); - if (error) - return error; - header = IHDR(inode, ext3_raw_inode(&is->iloc)); - if (!IS_LAST_ENTRY(s->first)) { - header->h_magic = cpu_to_le32(EXT3_XATTR_MAGIC); - ext3_set_inode_state(inode, EXT3_STATE_XATTR); - } else { - header->h_magic = cpu_to_le32(0); - ext3_clear_inode_state(inode, EXT3_STATE_XATTR); - } - return 0; -} - -/* - * ext3_xattr_set_handle() - * - * Create, replace or remove an extended attribute for this inode. Value - * is NULL to remove an existing extended attribute, and non-NULL to - * either replace an existing extended attribute, or create a new extended - * attribute. The flags XATTR_REPLACE and XATTR_CREATE - * specify that an extended attribute must exist and must not exist - * previous to the call, respectively. - * - * Returns 0, or a negative error number on failure. - */ -int -ext3_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index, - const char *name, const void *value, size_t value_len, - int flags) -{ - struct ext3_xattr_info i = { - .name_index = name_index, - .name = name, - .value = value, - .value_len = value_len, - - }; - struct ext3_xattr_ibody_find is = { - .s = { .not_found = -ENODATA, }, - }; - struct ext3_xattr_block_find bs = { - .s = { .not_found = -ENODATA, }, - }; - int error; - - if (!name) - return -EINVAL; - if (strlen(name) > 255) - return -ERANGE; - down_write(&EXT3_I(inode)->xattr_sem); - error = ext3_get_inode_loc(inode, &is.iloc); - if (error) - goto cleanup; - - error = ext3_journal_get_write_access(handle, is.iloc.bh); - if (error) - goto cleanup; - - if (ext3_test_inode_state(inode, EXT3_STATE_NEW)) { - struct ext3_inode *raw_inode = ext3_raw_inode(&is.iloc); - memset(raw_inode, 0, EXT3_SB(inode->i_sb)->s_inode_size); - ext3_clear_inode_state(inode, EXT3_STATE_NEW); - } - - error = ext3_xattr_ibody_find(inode, &i, &is); - if (error) - goto cleanup; - if (is.s.not_found) - error = ext3_xattr_block_find(inode, &i, &bs); - if (error) - goto cleanup; - if (is.s.not_found && bs.s.not_found) { - error = -ENODATA; - if (flags & XATTR_REPLACE) - goto cleanup; - error = 0; - if (!value) - goto cleanup; - } else { - error = -EEXIST; - if (flags & XATTR_CREATE) - goto cleanup; - } - if (!value) { - if (!is.s.not_found) - error = ext3_xattr_ibody_set(handle, inode, &i, &is); - else if (!bs.s.not_found) - error = ext3_xattr_block_set(handle, inode, &i, &bs); - } else { - error = ext3_xattr_ibody_set(handle, inode, &i, &is); - if (!error && !bs.s.not_found) { - i.value = NULL; - error = ext3_xattr_block_set(handle, inode, &i, &bs); - } else if (error == -ENOSPC) { - if (EXT3_I(inode)->i_file_acl && !bs.s.base) { - error = ext3_xattr_block_find(inode, &i, &bs); - if (error) - goto cleanup; - } - error = ext3_xattr_block_set(handle, inode, &i, &bs); - if (error) - goto cleanup; - if (!is.s.not_found) { - i.value = NULL; - error = ext3_xattr_ibody_set(handle, inode, &i, - &is); - } - } - } - if (!error) { - ext3_xattr_update_super_block(handle, inode->i_sb); - inode->i_ctime = CURRENT_TIME_SEC; - error = ext3_mark_iloc_dirty(handle, inode, &is.iloc); - /* - * The bh is consumed by ext3_mark_iloc_dirty, even with - * error != 0. - */ - is.iloc.bh = NULL; - if (IS_SYNC(inode)) - handle->h_sync = 1; - } - -cleanup: - brelse(is.iloc.bh); - brelse(bs.bh); - up_write(&EXT3_I(inode)->xattr_sem); - return error; -} - -/* - * ext3_xattr_set() - * - * Like ext3_xattr_set_handle, but start from an inode. This extended - * attribute modification is a filesystem transaction by itself. - * - * Returns 0, or a negative error number on failure. - */ -int -ext3_xattr_set(struct inode *inode, int name_index, const char *name, - const void *value, size_t value_len, int flags) -{ - handle_t *handle; - int error, retries = 0; - -retry: - handle = ext3_journal_start(inode, EXT3_DATA_TRANS_BLOCKS(inode->i_sb)); - if (IS_ERR(handle)) { - error = PTR_ERR(handle); - } else { - int error2; - - error = ext3_xattr_set_handle(handle, inode, name_index, name, - value, value_len, flags); - error2 = ext3_journal_stop(handle); - if (error == -ENOSPC && - ext3_should_retry_alloc(inode->i_sb, &retries)) - goto retry; - if (error == 0) - error = error2; - } - - return error; -} - -/* - * ext3_xattr_delete_inode() - * - * Free extended attribute resources associated with this inode. This - * is called immediately before an inode is freed. We have exclusive - * access to the inode. - */ -void -ext3_xattr_delete_inode(handle_t *handle, struct inode *inode) -{ - struct buffer_head *bh = NULL; - - if (!EXT3_I(inode)->i_file_acl) - goto cleanup; - bh = sb_bread(inode->i_sb, EXT3_I(inode)->i_file_acl); - if (!bh) { - ext3_error(inode->i_sb, __func__, - "inode %lu: block "E3FSBLK" read error", inode->i_ino, - EXT3_I(inode)->i_file_acl); - goto cleanup; - } - if (BHDR(bh)->h_magic != cpu_to_le32(EXT3_XATTR_MAGIC) || - BHDR(bh)->h_blocks != cpu_to_le32(1)) { - ext3_error(inode->i_sb, __func__, - "inode %lu: bad block "E3FSBLK, inode->i_ino, - EXT3_I(inode)->i_file_acl); - goto cleanup; - } - ext3_xattr_release_block(handle, inode, bh); - EXT3_I(inode)->i_file_acl = 0; - -cleanup: - brelse(bh); -} - -/* - * ext3_xattr_put_super() - * - * This is called when a file system is unmounted. - */ -void -ext3_xattr_put_super(struct super_block *sb) -{ - mb_cache_shrink(sb->s_bdev); -} - -/* - * ext3_xattr_cache_insert() - * - * Create a new entry in the extended attribute cache, and insert - * it unless such an entry is already in the cache. - * - * Returns 0, or a negative error number on failure. - */ -static void -ext3_xattr_cache_insert(struct buffer_head *bh) -{ - __u32 hash = le32_to_cpu(BHDR(bh)->h_hash); - struct mb_cache_entry *ce; - int error; - - ce = mb_cache_entry_alloc(ext3_xattr_cache, GFP_NOFS); - if (!ce) { - ea_bdebug(bh, "out of memory"); - return; - } - error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash); - if (error) { - mb_cache_entry_free(ce); - if (error == -EBUSY) { - ea_bdebug(bh, "already in cache"); - error = 0; - } - } else { - ea_bdebug(bh, "inserting [%x]", (int)hash); - mb_cache_entry_release(ce); - } -} - -/* - * ext3_xattr_cmp() - * - * Compare two extended attribute blocks for equality. - * - * Returns 0 if the blocks are equal, 1 if they differ, and - * a negative error number on errors. - */ -static int -ext3_xattr_cmp(struct ext3_xattr_header *header1, - struct ext3_xattr_header *header2) -{ - struct ext3_xattr_entry *entry1, *entry2; - - entry1 = ENTRY(header1+1); - entry2 = ENTRY(header2+1); - while (!IS_LAST_ENTRY(entry1)) { - if (IS_LAST_ENTRY(entry2)) - return 1; - if (entry1->e_hash != entry2->e_hash || - entry1->e_name_index != entry2->e_name_index || - entry1->e_name_len != entry2->e_name_len || - entry1->e_value_size != entry2->e_value_size || - memcmp(entry1->e_name, entry2->e_name, entry1->e_name_len)) - return 1; - if (entry1->e_value_block != 0 || entry2->e_value_block != 0) - return -EIO; - if (memcmp((char *)header1 + le16_to_cpu(entry1->e_value_offs), - (char *)header2 + le16_to_cpu(entry2->e_value_offs), - le32_to_cpu(entry1->e_value_size))) - return 1; - - entry1 = EXT3_XATTR_NEXT(entry1); - entry2 = EXT3_XATTR_NEXT(entry2); - } - if (!IS_LAST_ENTRY(entry2)) - return 1; - return 0; -} - -/* - * ext3_xattr_cache_find() - * - * Find an identical extended attribute block. - * - * Returns a pointer to the block found, or NULL if such a block was - * not found or an error occurred. - */ -static struct buffer_head * -ext3_xattr_cache_find(struct inode *inode, struct ext3_xattr_header *header, - struct mb_cache_entry **pce) -{ - __u32 hash = le32_to_cpu(header->h_hash); - struct mb_cache_entry *ce; - - if (!header->h_hash) - return NULL; /* never share */ - ea_idebug(inode, "looking for cached blocks [%x]", (int)hash); -again: - ce = mb_cache_entry_find_first(ext3_xattr_cache, inode->i_sb->s_bdev, - hash); - while (ce) { - struct buffer_head *bh; - - if (IS_ERR(ce)) { - if (PTR_ERR(ce) == -EAGAIN) - goto again; - break; - } - bh = sb_bread(inode->i_sb, ce->e_block); - if (!bh) { - ext3_error(inode->i_sb, __func__, - "inode %lu: block %lu read error", - inode->i_ino, (unsigned long) ce->e_block); - } else if (le32_to_cpu(BHDR(bh)->h_refcount) >= - EXT3_XATTR_REFCOUNT_MAX) { - ea_idebug(inode, "block %lu refcount %d>=%d", - (unsigned long) ce->e_block, - le32_to_cpu(BHDR(bh)->h_refcount), - EXT3_XATTR_REFCOUNT_MAX); - } else if (ext3_xattr_cmp(header, BHDR(bh)) == 0) { - *pce = ce; - return bh; - } - brelse(bh); - ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash); - } - return NULL; -} - -#define NAME_HASH_SHIFT 5 -#define VALUE_HASH_SHIFT 16 - -/* - * ext3_xattr_hash_entry() - * - * Compute the hash of an extended attribute. - */ -static inline void ext3_xattr_hash_entry(struct ext3_xattr_header *header, - struct ext3_xattr_entry *entry) -{ - __u32 hash = 0; - char *name = entry->e_name; - int n; - - for (n=0; n < entry->e_name_len; n++) { - hash = (hash << NAME_HASH_SHIFT) ^ - (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^ - *name++; - } - - if (entry->e_value_block == 0 && entry->e_value_size != 0) { - __le32 *value = (__le32 *)((char *)header + - le16_to_cpu(entry->e_value_offs)); - for (n = (le32_to_cpu(entry->e_value_size) + - EXT3_XATTR_ROUND) >> EXT3_XATTR_PAD_BITS; n; n--) { - hash = (hash << VALUE_HASH_SHIFT) ^ - (hash >> (8*sizeof(hash) - VALUE_HASH_SHIFT)) ^ - le32_to_cpu(*value++); - } - } - entry->e_hash = cpu_to_le32(hash); -} - -#undef NAME_HASH_SHIFT -#undef VALUE_HASH_SHIFT - -#define BLOCK_HASH_SHIFT 16 - -/* - * ext3_xattr_rehash() - * - * Re-compute the extended attribute hash value after an entry has changed. - */ -static void ext3_xattr_rehash(struct ext3_xattr_header *header, - struct ext3_xattr_entry *entry) -{ - struct ext3_xattr_entry *here; - __u32 hash = 0; - - ext3_xattr_hash_entry(header, entry); - here = ENTRY(header+1); - while (!IS_LAST_ENTRY(here)) { - if (!here->e_hash) { - /* Block is not shared if an entry's hash value == 0 */ - hash = 0; - break; - } - hash = (hash << BLOCK_HASH_SHIFT) ^ - (hash >> (8*sizeof(hash) - BLOCK_HASH_SHIFT)) ^ - le32_to_cpu(here->e_hash); - here = EXT3_XATTR_NEXT(here); - } - header->h_hash = cpu_to_le32(hash); -} - -#undef BLOCK_HASH_SHIFT - -int __init -init_ext3_xattr(void) -{ - ext3_xattr_cache = mb_cache_create("ext3_xattr", 6); - if (!ext3_xattr_cache) - return -ENOMEM; - return 0; -} - -void -exit_ext3_xattr(void) -{ - if (ext3_xattr_cache) - mb_cache_destroy(ext3_xattr_cache); - ext3_xattr_cache = NULL; -} diff --git a/ANDROID_3.4.5/fs/ext3/xattr.h b/ANDROID_3.4.5/fs/ext3/xattr.h deleted file mode 100644 index 2be4f69b..00000000 --- a/ANDROID_3.4.5/fs/ext3/xattr.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - File: fs/ext3/xattr.h - - On-disk format of extended attributes for the ext3 filesystem. - - (C) 2001 Andreas Gruenbacher, <a.gruenbacher@computer.org> -*/ - -#include <linux/xattr.h> - -/* Magic value in attribute blocks */ -#define EXT3_XATTR_MAGIC 0xEA020000 - -/* Maximum number of references to one attribute block */ -#define EXT3_XATTR_REFCOUNT_MAX 1024 - -/* Name indexes */ -#define EXT3_XATTR_INDEX_USER 1 -#define EXT3_XATTR_INDEX_POSIX_ACL_ACCESS 2 -#define EXT3_XATTR_INDEX_POSIX_ACL_DEFAULT 3 -#define EXT3_XATTR_INDEX_TRUSTED 4 -#define EXT3_XATTR_INDEX_LUSTRE 5 -#define EXT3_XATTR_INDEX_SECURITY 6 - -struct ext3_xattr_header { - __le32 h_magic; /* magic number for identification */ - __le32 h_refcount; /* reference count */ - __le32 h_blocks; /* number of disk blocks used */ - __le32 h_hash; /* hash value of all attributes */ - __u32 h_reserved[4]; /* zero right now */ -}; - -struct ext3_xattr_ibody_header { - __le32 h_magic; /* magic number for identification */ -}; - -struct ext3_xattr_entry { - __u8 e_name_len; /* length of name */ - __u8 e_name_index; /* attribute name index */ - __le16 e_value_offs; /* offset in disk block of value */ - __le32 e_value_block; /* disk block attribute is stored on (n/i) */ - __le32 e_value_size; /* size of attribute value */ - __le32 e_hash; /* hash value of name and value */ - char e_name[0]; /* attribute name */ -}; - -#define EXT3_XATTR_PAD_BITS 2 -#define EXT3_XATTR_PAD (1<<EXT3_XATTR_PAD_BITS) -#define EXT3_XATTR_ROUND (EXT3_XATTR_PAD-1) -#define EXT3_XATTR_LEN(name_len) \ - (((name_len) + EXT3_XATTR_ROUND + \ - sizeof(struct ext3_xattr_entry)) & ~EXT3_XATTR_ROUND) -#define EXT3_XATTR_NEXT(entry) \ - ( (struct ext3_xattr_entry *)( \ - (char *)(entry) + EXT3_XATTR_LEN((entry)->e_name_len)) ) -#define EXT3_XATTR_SIZE(size) \ - (((size) + EXT3_XATTR_ROUND) & ~EXT3_XATTR_ROUND) - -# ifdef CONFIG_EXT3_FS_XATTR - -extern const struct xattr_handler ext3_xattr_user_handler; -extern const struct xattr_handler ext3_xattr_trusted_handler; -extern const struct xattr_handler ext3_xattr_acl_access_handler; -extern const struct xattr_handler ext3_xattr_acl_default_handler; -extern const struct xattr_handler ext3_xattr_security_handler; - -extern ssize_t ext3_listxattr(struct dentry *, char *, size_t); - -extern int ext3_xattr_get(struct inode *, int, const char *, void *, size_t); -extern int ext3_xattr_set(struct inode *, int, const char *, const void *, size_t, int); -extern int ext3_xattr_set_handle(handle_t *, struct inode *, int, const char *, const void *, size_t, int); - -extern void ext3_xattr_delete_inode(handle_t *, struct inode *); -extern void ext3_xattr_put_super(struct super_block *); - -extern int init_ext3_xattr(void); -extern void exit_ext3_xattr(void); - -extern const struct xattr_handler *ext3_xattr_handlers[]; - -# else /* CONFIG_EXT3_FS_XATTR */ - -static inline int -ext3_xattr_get(struct inode *inode, int name_index, const char *name, - void *buffer, size_t size, int flags) -{ - return -EOPNOTSUPP; -} - -static inline int -ext3_xattr_set(struct inode *inode, int name_index, const char *name, - const void *value, size_t size, int flags) -{ - return -EOPNOTSUPP; -} - -static inline int -ext3_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index, - const char *name, const void *value, size_t size, int flags) -{ - return -EOPNOTSUPP; -} - -static inline void -ext3_xattr_delete_inode(handle_t *handle, struct inode *inode) -{ -} - -static inline void -ext3_xattr_put_super(struct super_block *sb) -{ -} - -static inline int -init_ext3_xattr(void) -{ - return 0; -} - -static inline void -exit_ext3_xattr(void) -{ -} - -#define ext3_xattr_handlers NULL - -# endif /* CONFIG_EXT3_FS_XATTR */ - -#ifdef CONFIG_EXT3_FS_SECURITY -extern int ext3_init_security(handle_t *handle, struct inode *inode, - struct inode *dir, const struct qstr *qstr); -#else -static inline int ext3_init_security(handle_t *handle, struct inode *inode, - struct inode *dir, const struct qstr *qstr) -{ - return 0; -} -#endif diff --git a/ANDROID_3.4.5/fs/ext3/xattr_security.c b/ANDROID_3.4.5/fs/ext3/xattr_security.c deleted file mode 100644 index 3387664a..00000000 --- a/ANDROID_3.4.5/fs/ext3/xattr_security.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * linux/fs/ext3/xattr_security.c - * Handler for storing security labels as extended attributes. - */ - -#include <linux/security.h> -#include "ext3.h" -#include "xattr.h" - -static size_t -ext3_xattr_security_list(struct dentry *dentry, char *list, size_t list_size, - const char *name, size_t name_len, int type) -{ - const size_t prefix_len = XATTR_SECURITY_PREFIX_LEN; - const size_t total_len = prefix_len + name_len + 1; - - - if (list && total_len <= list_size) { - memcpy(list, XATTR_SECURITY_PREFIX, prefix_len); - memcpy(list+prefix_len, name, name_len); - list[prefix_len + name_len] = '\0'; - } - return total_len; -} - -static int -ext3_xattr_security_get(struct dentry *dentry, const char *name, - void *buffer, size_t size, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_get(dentry->d_inode, EXT3_XATTR_INDEX_SECURITY, - name, buffer, size); -} - -static int -ext3_xattr_security_set(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_set(dentry->d_inode, EXT3_XATTR_INDEX_SECURITY, - name, value, size, flags); -} - -int ext3_initxattrs(struct inode *inode, const struct xattr *xattr_array, - void *fs_info) -{ - const struct xattr *xattr; - handle_t *handle = fs_info; - int err = 0; - - for (xattr = xattr_array; xattr->name != NULL; xattr++) { - err = ext3_xattr_set_handle(handle, inode, - EXT3_XATTR_INDEX_SECURITY, - xattr->name, xattr->value, - xattr->value_len, 0); - if (err < 0) - break; - } - return err; -} - -int -ext3_init_security(handle_t *handle, struct inode *inode, struct inode *dir, - const struct qstr *qstr) -{ - return security_inode_init_security(inode, dir, qstr, - &ext3_initxattrs, handle); -} - -const struct xattr_handler ext3_xattr_security_handler = { - .prefix = XATTR_SECURITY_PREFIX, - .list = ext3_xattr_security_list, - .get = ext3_xattr_security_get, - .set = ext3_xattr_security_set, -}; diff --git a/ANDROID_3.4.5/fs/ext3/xattr_trusted.c b/ANDROID_3.4.5/fs/ext3/xattr_trusted.c deleted file mode 100644 index d75727cc..00000000 --- a/ANDROID_3.4.5/fs/ext3/xattr_trusted.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * linux/fs/ext3/xattr_trusted.c - * Handler for trusted extended attributes. - * - * Copyright (C) 2003 by Andreas Gruenbacher, <a.gruenbacher@computer.org> - */ - -#include "ext3.h" -#include "xattr.h" - -static size_t -ext3_xattr_trusted_list(struct dentry *dentry, char *list, size_t list_size, - const char *name, size_t name_len, int type) -{ - const size_t prefix_len = XATTR_TRUSTED_PREFIX_LEN; - const size_t total_len = prefix_len + name_len + 1; - - if (!capable(CAP_SYS_ADMIN)) - return 0; - - if (list && total_len <= list_size) { - memcpy(list, XATTR_TRUSTED_PREFIX, prefix_len); - memcpy(list+prefix_len, name, name_len); - list[prefix_len + name_len] = '\0'; - } - return total_len; -} - -static int -ext3_xattr_trusted_get(struct dentry *dentry, const char *name, - void *buffer, size_t size, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_get(dentry->d_inode, EXT3_XATTR_INDEX_TRUSTED, - name, buffer, size); -} - -static int -ext3_xattr_trusted_set(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - return ext3_xattr_set(dentry->d_inode, EXT3_XATTR_INDEX_TRUSTED, name, - value, size, flags); -} - -const struct xattr_handler ext3_xattr_trusted_handler = { - .prefix = XATTR_TRUSTED_PREFIX, - .list = ext3_xattr_trusted_list, - .get = ext3_xattr_trusted_get, - .set = ext3_xattr_trusted_set, -}; diff --git a/ANDROID_3.4.5/fs/ext3/xattr_user.c b/ANDROID_3.4.5/fs/ext3/xattr_user.c deleted file mode 100644 index 5612af35..00000000 --- a/ANDROID_3.4.5/fs/ext3/xattr_user.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * linux/fs/ext3/xattr_user.c - * Handler for extended user attributes. - * - * Copyright (C) 2001 by Andreas Gruenbacher, <a.gruenbacher@computer.org> - */ - -#include "ext3.h" -#include "xattr.h" - -static size_t -ext3_xattr_user_list(struct dentry *dentry, char *list, size_t list_size, - const char *name, size_t name_len, int type) -{ - const size_t prefix_len = XATTR_USER_PREFIX_LEN; - const size_t total_len = prefix_len + name_len + 1; - - if (!test_opt(dentry->d_sb, XATTR_USER)) - return 0; - - if (list && total_len <= list_size) { - memcpy(list, XATTR_USER_PREFIX, prefix_len); - memcpy(list+prefix_len, name, name_len); - list[prefix_len + name_len] = '\0'; - } - return total_len; -} - -static int -ext3_xattr_user_get(struct dentry *dentry, const char *name, void *buffer, - size_t size, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - if (!test_opt(dentry->d_sb, XATTR_USER)) - return -EOPNOTSUPP; - return ext3_xattr_get(dentry->d_inode, EXT3_XATTR_INDEX_USER, - name, buffer, size); -} - -static int -ext3_xattr_user_set(struct dentry *dentry, const char *name, - const void *value, size_t size, int flags, int type) -{ - if (strcmp(name, "") == 0) - return -EINVAL; - if (!test_opt(dentry->d_sb, XATTR_USER)) - return -EOPNOTSUPP; - return ext3_xattr_set(dentry->d_inode, EXT3_XATTR_INDEX_USER, - name, value, size, flags); -} - -const struct xattr_handler ext3_xattr_user_handler = { - .prefix = XATTR_USER_PREFIX, - .list = ext3_xattr_user_list, - .get = ext3_xattr_user_get, - .set = ext3_xattr_user_set, -}; |