diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/video/backlight/Kconfig')
| -rw-r--r-- | ANDROID_3.4.5/drivers/video/backlight/Kconfig | 366 |
1 files changed, 0 insertions, 366 deletions
diff --git a/ANDROID_3.4.5/drivers/video/backlight/Kconfig b/ANDROID_3.4.5/drivers/video/backlight/Kconfig deleted file mode 100644 index af168844..00000000 --- a/ANDROID_3.4.5/drivers/video/backlight/Kconfig +++ /dev/null @@ -1,366 +0,0 @@ -# -# Backlight & LCD drivers configuration -# - -menuconfig BACKLIGHT_LCD_SUPPORT - bool "Backlight & LCD device support" - help - Enable this to be able to choose the drivers for controlling the - backlight and the LCD panel on some platforms, for example on PDAs. - -if BACKLIGHT_LCD_SUPPORT - -# -# LCD -# -config LCD_CLASS_DEVICE - tristate "Lowlevel LCD controls" - default m - help - This framework adds support for low-level control of LCD. - Some framebuffer devices connect to platform-specific LCD modules - in order to have a platform-specific way to control the flat panel - (contrast and applying power to the LCD (not to the backlight!)). - - To have support for your specific LCD panel you will have to - select the proper drivers which depend on this option. - -if LCD_CLASS_DEVICE - -config LCD_CORGI - tristate "LCD Panel support for SHARP corgi/spitz model" - depends on SPI_MASTER && PXA_SHARPSL - help - Say y here to support the LCD panels usually found on SHARP - corgi (C7x0) and spitz (Cxx00) models. - -config LCD_L4F00242T03 - tristate "Epson L4F00242T03 LCD" - depends on SPI_MASTER && GENERIC_GPIO - help - SPI driver for Epson L4F00242T03. This provides basic support - for init and powering the LCD up/down through a sysfs interface. - -config LCD_LMS283GF05 - tristate "Samsung LMS283GF05 LCD" - depends on SPI_MASTER && GENERIC_GPIO - help - SPI driver for Samsung LMS283GF05. This provides basic support - for powering the LCD up/down through a sysfs interface. - -config LCD_LTV350QV - tristate "Samsung LTV350QV LCD Panel" - depends on SPI_MASTER - help - If you have a Samsung LTV350QV LCD panel, say y to include a - power control driver for it. The panel starts up in power - off state, so you need this driver in order to see any - output. - - The LTV350QV panel is present on all ATSTK1000 boards. - -config LCD_ILI9320 - tristate - help - If you have a panel based on the ILI9320 controller chip - then say y to include a power driver for it. - -config LCD_TDO24M - tristate "Toppoly TDO24M and TDO35S LCD Panels support" - depends on SPI_MASTER - help - If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to - include the support for it. - -config LCD_VGG2432A4 - tristate "VGG2432A4 LCM device support" - depends on SPI_MASTER - select LCD_ILI9320 - help - If you have a VGG2432A4 panel based on the ILI9320 controller chip - then say y to include a power driver for it. - -config LCD_PLATFORM - tristate "Platform LCD controls" - help - This driver provides a platform-device registered LCD power - control interface. - -config LCD_TOSA - tristate "Sharp SL-6000 LCD Driver" - depends on SPI && MACH_TOSA - help - If you have an Sharp SL-6000 Zaurus say Y to enable a driver - for its LCD. - -config LCD_HP700 - tristate "HP Jornada 700 series LCD Driver" - depends on SA1100_JORNADA720_SSP && !PREEMPT - default y - help - If you have an HP Jornada 700 series handheld (710/720/728) - say Y to enable LCD control driver. - -config LCD_S6E63M0 - tristate "S6E63M0 AMOLED LCD Driver" - depends on SPI && BACKLIGHT_CLASS_DEVICE - default n - help - If you have an S6E63M0 LCD Panel, say Y to enable its - LCD control driver. - -config LCD_LD9040 - tristate "LD9040 AMOLED LCD Driver" - depends on SPI && BACKLIGHT_CLASS_DEVICE - default n - help - If you have an LD9040 Panel, say Y to enable its - control driver. - -config LCD_AMS369FG06 - tristate "AMS369FG06 AMOLED LCD Driver" - depends on SPI && BACKLIGHT_CLASS_DEVICE - default n - help - If you have an AMS369FG06 AMOLED Panel, say Y to enable its - LCD control driver. - -endif # LCD_CLASS_DEVICE - -# -# Backlight -# -config BACKLIGHT_CLASS_DEVICE - tristate "Lowlevel Backlight controls" - default m - help - This framework adds support for low-level control of the LCD - backlight. This includes support for brightness and power. - - To have support for your specific LCD panel you will have to - select the proper drivers which depend on this option. - -if BACKLIGHT_CLASS_DEVICE - -config BACKLIGHT_ATMEL_LCDC - bool "Atmel LCDC Contrast-as-Backlight control" - depends on FB_ATMEL - default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK - help - This provides a backlight control internal to the Atmel LCDC - driver. If the LCD "contrast control" on your board is wired - so it controls the backlight brightness, select this option to - export this as a PWM-based backlight control. - - If in doubt, it's safe to enable this option; it doesn't kick - in unless the board's description says it's wired that way. - -config BACKLIGHT_ATMEL_PWM - tristate "Atmel PWM backlight control" - depends on ATMEL_PWM - help - Say Y here if you want to use the PWM peripheral in Atmel AT91 and - AVR32 devices. This driver will need additional platform data to know - which PWM instance to use and how to configure it. - - To compile this driver as a module, choose M here: the module will be - called atmel-pwm-bl. - -config BACKLIGHT_EP93XX - tristate "Cirrus EP93xx Backlight Driver" - depends on FB_EP93XX - help - If you have a LCD backlight connected to the BRIGHT output of - the EP93xx, say Y here to enable this driver. - - To compile this driver as a module, choose M here: the module will - be called ep93xx_bl. - -config BACKLIGHT_GENERIC - tristate "Generic (aka Sharp Corgi) Backlight Driver" - default y - help - Say y to enable the generic platform backlight driver previously - known as the Corgi backlight driver. If you have a Sharp Zaurus - SL-C7xx, SL-Cxx00 or SL-6000x say y. - -config BACKLIGHT_LOCOMO - tristate "Sharp LOCOMO LCD/Backlight Driver" - depends on SHARP_LOCOMO - default y - help - If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to - enable the LCD/backlight driver. - -config BACKLIGHT_OMAP1 - tristate "OMAP1 PWL-based LCD Backlight" - depends on ARCH_OMAP1 - default y - help - This driver controls the LCD backlight level and power for - the PWL module of OMAP1 processors. Say Y if your board - uses this hardware. - -config BACKLIGHT_HP680 - tristate "HP Jornada 680 Backlight Driver" - depends on SH_HP6XX - default y - help - If you have a HP Jornada 680, say y to enable the - backlight driver. - -config BACKLIGHT_HP700 - tristate "HP Jornada 700 series Backlight Driver" - depends on SA1100_JORNADA720_SSP && !PREEMPT - default y - help - If you have an HP Jornada 700 series, - say Y to include backlight control driver. - -config BACKLIGHT_PROGEAR - tristate "Frontpath ProGear Backlight Driver" - depends on PCI && X86 - help - If you have a Frontpath ProGear say Y to enable the - backlight driver. - -config BACKLIGHT_CARILLO_RANCH - tristate "Intel Carillo Ranch Backlight Driver" - depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 - help - If you have a Intel LE80578 (Carillo Ranch) say Y to enable the - backlight driver. - -config BACKLIGHT_PWM - tristate "Generic PWM based Backlight Driver" - depends on HAVE_PWM - help - If you have a LCD backlight adjustable by PWM, say Y to enable - this driver. - -config BACKLIGHT_DA903X - tristate "Backlight Driver for DA9030/DA9034 using WLED" - depends on PMIC_DA903X - help - If you have a LCD backlight connected to the WLED output of DA9030 - or DA9034 WLED output, say Y here to enable this driver. - -config BACKLIGHT_DA9052 - tristate "Dialog DA9052/DA9053 WLED" - depends on PMIC_DA9052 - help - Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. - -config BACKLIGHT_MAX8925 - tristate "Backlight driver for MAX8925" - depends on MFD_MAX8925 - help - If you have a LCD backlight connected to the WLED output of MAX8925 - WLED output, say Y here to enable this driver. - -config BACKLIGHT_APPLE - tristate "Apple Backlight Driver" - depends on X86 && ACPI - help - If you have an Intel-based Apple say Y to enable a driver for its - backlight. - -config BACKLIGHT_TOSA - tristate "Sharp SL-6000 Backlight Driver" - depends on I2C && MACH_TOSA && LCD_TOSA - help - If you have an Sharp SL-6000 Zaurus say Y to enable a driver - for its backlight - -config BACKLIGHT_SAHARA - tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" - depends on X86 - help - If you have a Tabletkiosk Sahara Touch-iT, say y to enable the - backlight driver. - -config BACKLIGHT_WM831X - tristate "WM831x PMIC Backlight Driver" - depends on MFD_WM831X - help - If you have a backlight driven by the ISINK and DCDC of a - WM831x PMIC say y to enable the backlight driver for it. - -config BACKLIGHT_ADP5520 - tristate "Backlight Driver for ADP5520/ADP5501 using WLED" - depends on PMIC_ADP5520 - help - If you have a LCD backlight connected to the BST/BL_SNK output of - ADP5520 or ADP5501, say Y here to enable this driver. - - To compile this driver as a module, choose M here: the module will - be called adp5520_bl. - -config BACKLIGHT_ADP8860 - tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED" - depends on BACKLIGHT_CLASS_DEVICE && I2C - select NEW_LEDS - select LEDS_CLASS - help - If you have a LCD backlight connected to the ADP8860, ADP8861 or - ADP8863 say Y here to enable this driver. - - To compile this driver as a module, choose M here: the module will - be called adp8860_bl. - -config BACKLIGHT_ADP8870 - tristate "Backlight Driver for ADP8870 using WLED" - depends on BACKLIGHT_CLASS_DEVICE && I2C - select NEW_LEDS - select LEDS_CLASS - help - If you have a LCD backlight connected to the ADP8870, - say Y here to enable this driver. - - To compile this driver as a module, choose M here: the module will - be called adp8870_bl. - -config BACKLIGHT_88PM860X - tristate "Backlight Driver for 88PM8606 using WLED" - depends on MFD_88PM860X - help - Say Y to enable the backlight driver for Marvell 88PM8606. - -config BACKLIGHT_PCF50633 - tristate "Backlight driver for NXP PCF50633 MFD" - depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633 - help - If you have a backlight driven by a NXP PCF50633 MFD, say Y here to - enable its driver. - -config BACKLIGHT_AAT2870 - tristate "AnalogicTech AAT2870 Backlight" - depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE - help - If you have a AnalogicTech AAT2870 say Y to enable the - backlight driver. - -config BACKLIGHT_LP855X - tristate "Backlight driver for TI LP855X" - depends on BACKLIGHT_CLASS_DEVICE && I2C - help - This supports TI LP8550, LP8551, LP8552, LP8553 and LP8556 - backlight driver. - -config BACKLIGHT_OT200 - tristate "Backlight driver for ot200 visualisation device" - depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535 - help - To compile this driver as a module, choose M here: the module will be - called ot200_bl. - -config BACKLIGHT_PANDORA - tristate "Backlight driver for Pandora console" - depends on TWL4030_CORE - help - If you have a Pandora console, say Y to enable the - backlight driver. - -endif # BACKLIGHT_CLASS_DEVICE - -endif # BACKLIGHT_LCD_SUPPORT |