diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/rtl8188E_8192E/include/autoconf.h')
| -rwxr-xr-x | ANDROID_3.4.5/drivers/net/wireless/rtl8188E_8192E/include/autoconf.h | 405 |
1 files changed, 0 insertions, 405 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/rtl8188E_8192E/include/autoconf.h b/ANDROID_3.4.5/drivers/net/wireless/rtl8188E_8192E/include/autoconf.h deleted file mode 100755 index 52765d16..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/rtl8188E_8192E/include/autoconf.h +++ /dev/null @@ -1,405 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * - ******************************************************************************/ -//***** temporarily flag ******* - -//#define CONFIG_DISABLE_ODM -#define CONFIG_ODM_REFRESH_RAMASK -#define CONFIG_PHY_SETTING_WITH_ODM -//for FPGA VERIFICATION config -#define RTL8188E_FPGA_TRUE_PHY_VERIFICATION 0 - -//***** temporarily flag ******* -/* - * Public General Config - */ -#define AUTOCONF_INCLUDED -#define RTL871X_MODULE_NAME "88EU" -#define DRV_NAME "rtl8188eu" - -#define CONFIG_USB_HCI - -#define CONFIG_RTL8188E - -#define PLATFORM_LINUX - -#define CONFIG_IOCTL_CFG80211 1 - -#if defined( CONFIG_PLATFORM_ARM_SUNxI) || defined(CONFIG_PLATFORM_ACTIONS_ATM702X) - #ifndef CONFIG_IOCTL_CFG80211 - #define CONFIG_IOCTL_CFG80211 - #endif -#endif - -#ifdef CONFIG_IOCTL_CFG80211 - #define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */ - #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER - //#define CONFIG_DEBUG_CFG80211 - //#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2 - #define CONFIG_SET_SCAN_DENY_TIMER - -#endif - -/* - * Internal General Config - */ - -//#define CONFIG_H2CLBK - -#define CONFIG_EMBEDDED_FWIMG -//#define CONFIG_FILE_FWIMG - -#define CONFIG_XMIT_ACK -#ifdef CONFIG_XMIT_ACK - #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK -#endif -#define CONFIG_80211N_HT - -#define CONFIG_RECV_REORDERING_CTRL - -//#define CONFIG_TCP_CSUM_OFFLOAD_RX - -//#define CONFIG_DRVEXT_MODULE - - #define CONFIG_SUPPORT_USB_INT - #ifdef CONFIG_SUPPORT_USB_INT -//#define CONFIG_USB_INTERRUPT_IN_PIPE -#endif - -//#ifndef CONFIG_MP_INCLUDED - #define CONFIG_IPS - #ifdef CONFIG_IPS - //#define CONFIG_IPS_LEVEL_2 //enable this to set default IPS mode to IPS_LEVEL_2 - #endif - #define SUPPORT_HW_RFOFF_DETECTED - - #define CONFIG_LPS - #if defined(CONFIG_LPS) && defined(CONFIG_SUPPORT_USB_INT) - - - //#define CONFIG_LPS_LCLK - #endif - - #ifdef CONFIG_LPS_LCLK - #define CONFIG_XMIT_THREAD_MODE - #endif - - //befor link - #define CONFIG_ANTENNA_DIVERSITY - - //after link - #ifdef CONFIG_ANTENNA_DIVERSITY - #define CONFIG_HW_ANTENNA_DIVERSITY - #endif - - - #define CONFIG_CONCURRENT_MODE 1 - #ifdef CONFIG_CONCURRENT_MODE - //#define CONFIG_HWPORT_SWAP //Port0->Sec , Port1 -> Pri - #define CONFIG_TSF_RESET_OFFLOAD // For 2 PORT TSF SYNC. - #endif - - #define CONFIG_IOL -//#else //#ifndef CONFIG_MP_INCLUDED - -//#endif //#ifndef CONFIG_MP_INCLUDED - -#define CONFIG_AP_MODE -#ifdef CONFIG_AP_MODE - //#define CONFIG_INTERRUPT_BASED_TXBCN // Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs - #if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN) - #undef CONFIG_INTERRUPT_BASED_TXBCN - #endif - #ifdef CONFIG_INTERRUPT_BASED_TXBCN - //#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT - #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR - #endif - - #define CONFIG_NATIVEAP_MLME - #ifndef CONFIG_NATIVEAP_MLME - #define CONFIG_HOSTAPD_MLME - #endif - #define CONFIG_FIND_BEST_CHANNEL - //#define CONFIG_NO_WIRELESS_HANDLERS -#endif - -#define CONFIG_P2P -#ifdef CONFIG_P2P - //The CONFIG_WFD is for supporting the Wi-Fi display - #define CONFIG_WFD - - #ifndef CONFIG_WIFI_TEST - #define CONFIG_P2P_REMOVE_GROUP_INFO - #endif - //#define CONFIG_DBG_P2P - - #define CONFIG_P2P_PS - #define CONFIG_P2P_IPS -#endif - -// Added by Kurt 20110511 -//#define CONFIG_TDLS -#ifdef CONFIG_TDLS -// #ifndef CONFIG_WFD -// #define CONFIG_WFD -// #endif -// #define CONFIG_TDLS_AUTOSETUP -// #define CONFIG_TDLS_AUTOCHECKALIVE -#endif - - -#define CONFIG_SKB_COPY //for amsdu - -//#define CONFIG_LED -#ifdef CONFIG_LED - #define CONFIG_SW_LED - #ifdef CONFIG_SW_LED - //#define CONFIG_LED_HANDLED_BY_CMD_THREAD - #endif -#endif // CONFIG_LED - -#ifdef CONFIG_IOL - #define CONFIG_IOL_NEW_GENERATION - #define CONFIG_IOL_READ_EFUSE_MAP - //#define DBG_IOL_READ_EFUSE_MAP - //#define CONFIG_IOL_LLT - #define CONFIG_IOL_EFUSE_PATCH - //#define CONFIG_IOL_IOREG_CFG - //#define CONFIG_IOL_IOREG_CFG_DBG -#endif - - -#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface -#define CONFIG_GLOBAL_UI_PID - -#define CONFIG_LAYER2_ROAMING -#define CONFIG_LAYER2_ROAMING_RESUME -//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general... -//#define CONFIG_RESUME_IN_WORKQUEUE -//#define CONFIG_SET_SCAN_DENY_TIMER -#define CONFIG_LONG_DELAY_ISSUE -#define CONFIG_NEW_SIGNAL_STAT_PROCESS -//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm -#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */ - -#define CONFIG_BR_EXT // Enable NAT2.5 support for STA mode interface with a L2 Bridge -#ifdef CONFIG_BR_EXT -#define CONFIG_BR_EXT_BRNAME "br0" -#endif // CONFIG_BR_EXT - -#define CONFIG_TX_MCAST2UNI // Support IP multicast->unicast -#define CONFIG_CHECK_AC_LIFETIME // Check packet lifetime of 4 ACs. - - -/* - * Interface Related Config - */ - -#ifndef CONFIG_MINIMAL_MEMORY_USAGE - #define CONFIG_USB_TX_AGGREGATION - #define CONFIG_USB_RX_AGGREGATION -#endif - -#define CONFIG_PREALLOC_RECV_SKB -//#define CONFIG_REDUCE_USB_TX_INT // Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. -//#define CONFIG_EASY_REPLACEMENT - -/* - * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now! - */ -//#define CONFIG_USE_USB_BUFFER_ALLOC_TX // Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. -//#define CONFIG_USE_USB_BUFFER_ALLOC_RX // For RX path -#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX -#undef CONFIG_PREALLOC_RECV_SKB -#endif - -#ifdef CONFIG_PLATFORM_ARM_SUNxI - #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX - #define CONFIG_USE_USB_BUFFER_ALLOC_TX - #endif -#endif - -/* - * USB VENDOR REQ BUFFER ALLOCATION METHOD - * if not set we'll use function local variable (stack memory) - */ -//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE -#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC - -#define CONFIG_USB_VENDOR_REQ_MUTEX -#define CONFIG_VENDOR_REQ_RETRY - -//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ - - -/* - * HAL Related Config - */ - -#define RTL8188E_RX_PACKET_INCLUDE_CRC 0 - -#define SUPPORTED_BLOCK_IO - - -//#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 - -#define CONFIG_OUT_EP_WIFI_MODE 0 - -#define ENABLE_USB_DROP_INCORRECT_OUT 0 - - -//#define RTL8192CU_ADHOC_WORKAROUND_SETTING - -#define DISABLE_BB_RF 0 - -//#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0 - -#ifdef CONFIG_MP_INCLUDED - #define MP_DRIVER 1 - #define CONFIG_MP_IWPRIV_SUPPORT - //#undef CONFIG_USB_TX_AGGREGATION - //#undef CONFIG_USB_RX_AGGREGATION -#else - #define MP_DRIVER 0 -#endif - - -/* - * Platform Related Config - */ -#ifdef CONFIG_PLATFORM_MN10300 - #define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV - #define CONFIG_USE_USB_BUFFER_ALLOC_RX - - #if defined (CONFIG_SW_ANTENNA_DIVERSITY) - #undef CONFIG_SW_ANTENNA_DIVERSITY - #define CONFIG_HW_ANTENNA_DIVERSITY - #endif - - #if defined (CONFIG_POWER_SAVING) - #undef CONFIG_POWER_SAVING - #endif - -#endif//CONFIG_PLATFORM_MN10300 - - - -#ifdef CONFIG_PLATFORM_TI_DM365 -#define CONFIG_USE_USB_BUFFER_ALLOC_RX -#endif - - -#if defined(CONFIG_PLATFORM_ACTIONS_ATM702X) - #ifdef CONFIG_USB_TX_AGGREGATION - #undef CONFIG_USB_TX_AGGREGATION - #endif - #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX - #define CONFIG_USE_USB_BUFFER_ALLOC_TX - #endif - #ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX - #define CONFIG_USE_USB_BUFFER_ALLOC_RX - #endif -#endif - - -/* - * Outsource Related Config - */ - -#define RTL8192CE_SUPPORT 0 -#define RTL8192CU_SUPPORT 0 -#define RTL8192C_SUPPORT (RTL8192CE_SUPPORT|RTL8192CU_SUPPORT) - -#define RTL8192DE_SUPPORT 0 -#define RTL8192DU_SUPPORT 0 -#define RTL8192D_SUPPORT (RTL8192DE_SUPPORT|RTL8192DU_SUPPORT) - -#define RTL8723AU_SUPPORT 0 -#define RTL8723AS_SUPPORT 0 -#define RTL8723AE_SUPPORT 0 -#define RTL8723A_SUPPORT (RTL8723AU_SUPPORT|RTL8723AS_SUPPORT|RTL8723AE_SUPPORT) - -#define RTL8723_FPGA_VERIFICATION 0 - -#define RTL8188EE_SUPPORT 0 -#define RTL8188EU_SUPPORT 1 -#define RTL8188ES_SUPPORT 0 -#define RTL8188E_SUPPORT (RTL8188EE_SUPPORT|RTL8188EU_SUPPORT|RTL8188ES_SUPPORT) -#define RTL8188E_FOR_TEST_CHIP 0 -//#if (RTL8188E_SUPPORT==1) -#define RATE_ADAPTIVE_SUPPORT 1 -#define POWER_TRAINING_ACTIVE 1 - -//#endif - -#ifdef CONFIG_USB_TX_AGGREGATION -//#define CONFIG_TX_EARLY_MODE -#endif - -#ifdef CONFIG_TX_EARLY_MODE -#define RTL8188E_EARLY_MODE_PKT_NUM_10 0 -#endif - -#define CONFIG_80211D - -#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR - -/* - * Debug Related Config - */ -#define DBG 0 - -//#define CONFIG_DEBUG /* DBG_871X, etc... */ -//#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */ - -#define CONFIG_PROC_DEBUG - -#define DBG_CONFIG_ERROR_DETECT -//#define DBG_CONFIG_ERROR_DETECT_INT -#define DBG_CONFIG_ERROR_RESET - -//#define DBG_IO -//#define DBG_DELAY_OS -//#define DBG_MEM_ALLOC -//#define DBG_IOCTL - -//#define DBG_TX -//#define DBG_XMIT_BUF -//#define DBG_XMIT_BUF_EXT -//#define DBG_TX_DROP_FRAME - -//#define DBG_RX_DROP_FRAME -//#define DBG_RX_SEQ -//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING -//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap" - - - -//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE -//#define DBG_ROAMING_TEST - -//#define DBG_HAL_INIT_PROFILING - -//#define DBG_MEMORY_LEAK - -//TX use 1 urb -//#define CONFIG_SINGLE_XMIT_BUF -//RX use 1 urb -//#define CONFIG_SINGLE_RECV_BUF - |