diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/iwlwifi')
60 files changed, 0 insertions, 43442 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/Kconfig b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/Kconfig deleted file mode 100644 index 2fe62730..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/Kconfig +++ /dev/null @@ -1,138 +0,0 @@ -config IWLWIFI - tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) " - depends on PCI && MAC80211 && HAS_IOMEM - select FW_LOADER - select NEW_LEDS - select LEDS_CLASS - select LEDS_TRIGGERS - select MAC80211_LEDS - ---help--- - Select to build the driver supporting the: - - Intel Wireless WiFi Link Next-Gen AGN - - This option enables support for use with the following hardware: - Intel Wireless WiFi Link 6250AGN Adapter - Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN) - Intel WiFi Link 1000BGN - Intel Wireless WiFi 5150AGN - Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN - Intel 6005 Series Wi-Fi Adapters - Intel 6030 Series Wi-Fi Adapters - Intel Wireless WiFi Link 6150BGN 2 Adapter - Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN) - Intel 2000 Series Wi-Fi Adapters - - - This driver uses the kernel's mac80211 subsystem. - - In order to use this driver, you will need a microcode (uCode) - image for it. You can obtain the microcode from: - - <http://intellinuxwireless.org/>. - - The microcode is typically installed in /lib/firmware. You can - look in the hotplug script /etc/hotplug/firmware.agent to - determine which directory FIRMWARE_DIR is set to when the script - runs. - - If you want to compile the driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read <file:Documentation/kbuild/modules.txt>. The - module will be called iwlwifi. - -menu "Debugging Options" - depends on IWLWIFI - -config IWLWIFI_DEBUG - bool "Enable full debugging output in the iwlwifi driver" - depends on IWLWIFI - ---help--- - This option will enable debug tracing output for the iwlwifi drivers - - This will result in the kernel module being ~100k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/module/iwlwifi/parameters/debug - - This entry will only exist if this option is enabled. - - To set a value, simply echo an 8-byte hex value to the same file: - - % echo 0x43fff > /sys/module/iwlwifi/parameters/debug - - You can find the list of debug mask values in: - drivers/net/wireless/iwlwifi/iwl-debug.h - - If this is your first time using this driver, you should say Y here - as the debug information can assist others in helping you resolve - any problems you may encounter. - -config IWLWIFI_DEBUGFS - bool "iwlwifi debugfs support" - depends on IWLWIFI && MAC80211_DEBUGFS - ---help--- - Enable creation of debugfs files for the iwlwifi drivers. This - is a low-impact option that allows getting insight into the - driver's state at runtime. - -config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE - bool "Experimental uCode support" - depends on IWLWIFI && IWLWIFI_DEBUG - ---help--- - Enable use of experimental ucode for testing and debugging. - -config IWLWIFI_DEVICE_TRACING - bool "iwlwifi device access tracing" - depends on IWLWIFI - depends on EVENT_TRACING - help - Say Y here to trace all commands, including TX frames and IO - accesses, sent to the device. If you say yes, iwlwifi will - register with the ftrace framework for event tracing and dump - all this information to the ringbuffer, you may need to - increase the ringbuffer size. See the ftrace documentation - for more information. - - When tracing is not enabled, this option still has some - (though rather small) overhead. - - If unsure, say Y so we can help you better when problems - occur. -endmenu - -config IWLWIFI_DEVICE_TESTMODE - def_bool y - depends on IWLWIFI - depends on NL80211_TESTMODE - help - This option enables the testmode support for iwlwifi device through - NL80211_TESTMODE. This provide the capabilities of enable user space - validation applications to interacts with the device through the - generic netlink message via NL80211_TESTMODE channel. - -config IWLWIFI_P2P - bool "iwlwifi experimental P2P support" - depends on IWLWIFI - help - This option enables experimental P2P support for some devices - based on microcode support. Since P2P support is still under - development, this option may even enable it for some devices - now that turn out to not support it in the future due to - microcode restrictions. - - To determine if your microcode supports the experimental P2P - offered by this option, check if the driver advertises AP - support when it is loaded. - - Say Y only if you want to experiment with P2P. - -config IWLWIFI_EXPERIMENTAL_MFP - bool "support MFP (802.11w) even if uCode doesn't advertise" - depends on IWLWIFI - help - This option enables experimental MFP (802.11W) support - even if the microcode doesn't advertise it. - - Say Y only if you want to experiment with MFP. diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/Makefile b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/Makefile deleted file mode 100644 index 85d163ed..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# WIFI -obj-$(CONFIG_IWLWIFI) += iwlwifi.o -iwlwifi-objs := iwl-agn.o iwl-agn-rs.o iwl-mac80211.o -iwlwifi-objs += iwl-ucode.o iwl-agn-tx.o iwl-debug.o -iwlwifi-objs += iwl-agn-lib.o iwl-agn-calib.o iwl-io.o -iwlwifi-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-rx.o - -iwlwifi-objs += iwl-core.o iwl-eeprom.o iwl-power.o -iwlwifi-objs += iwl-scan.o iwl-led.o -iwlwifi-objs += iwl-agn-rxon.o -iwlwifi-objs += iwl-5000.o -iwlwifi-objs += iwl-6000.o -iwlwifi-objs += iwl-1000.o -iwlwifi-objs += iwl-2000.o -iwlwifi-objs += iwl-pci.o -iwlwifi-objs += iwl-drv.o -iwlwifi-objs += iwl-notif-wait.o -iwlwifi-objs += iwl-trans-pcie.o iwl-trans-pcie-rx.o iwl-trans-pcie-tx.o - -iwlwifi-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o -iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o -iwlwifi-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += iwl-testmode.o - -CFLAGS_iwl-devtrace.o := -I$(src) - -ccflags-y += -D__CHECK_ENDIAN__ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c deleted file mode 100644 index 8d80e233..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-1000.c +++ /dev/null @@ -1,230 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> -#include <linux/stringify.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-agn-hw.h" -#include "iwl-shared.h" -#include "iwl-cfg.h" -#include "iwl-prph.h" - -/* Highest firmware API version supported */ -#define IWL1000_UCODE_API_MAX 5 -#define IWL100_UCODE_API_MAX 5 - -/* Oldest version we won't warn about */ -#define IWL1000_UCODE_API_OK 5 -#define IWL100_UCODE_API_OK 5 - -/* Lowest firmware API version supported */ -#define IWL1000_UCODE_API_MIN 1 -#define IWL100_UCODE_API_MIN 5 - -#define IWL1000_FW_PRE "iwlwifi-1000-" -#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode" - -#define IWL100_FW_PRE "iwlwifi-100-" -#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode" - - -/* - * For 1000, use advance thermal throttling critical temperature threshold, - * but legacy thermal management implementation for now. - * This is for the reason of 1000 uCode using advance thermal throttling API - * but not implement ct_kill_exit based on ct_kill exit temperature - * so the thermal throttling will still based on legacy thermal throttling - * management. - * The code here need to be modified once 1000 uCode has the advanced thermal - * throttling algorithm in place - */ -static void iwl1000_set_ct_threshold(struct iwl_priv *priv) -{ - /* want Celsius */ - hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; - hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; -} - -/* NIC configuration for 1000 series */ -static void iwl1000_nic_config(struct iwl_priv *priv) -{ - /* set CSR_HW_CONFIG_REG for uCode use */ - iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); - - /* Setting digital SVR for 1000 card to 1.32V */ - /* locking is acquired in iwl_set_bits_mask_prph() function */ - iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG, - APMG_SVR_DIGITAL_VOLTAGE_1_32, - ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK); -} - -static const struct iwl_sensitivity_ranges iwl1000_sensitivity = { - .min_nrg_cck = 95, - .auto_corr_min_ofdm = 90, - .auto_corr_min_ofdm_mrc = 170, - .auto_corr_min_ofdm_x1 = 120, - .auto_corr_min_ofdm_mrc_x1 = 240, - - .auto_corr_max_ofdm = 120, - .auto_corr_max_ofdm_mrc = 210, - .auto_corr_max_ofdm_x1 = 155, - .auto_corr_max_ofdm_mrc_x1 = 290, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 200, - .auto_corr_min_cck_mrc = 170, - .auto_corr_max_cck_mrc = 400, - .nrg_th_cck = 95, - .nrg_th_ofdm = 95, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -static void iwl1000_hw_set_hw_params(struct iwl_priv *priv) -{ - hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ); - - hw_params(priv).tx_chains_num = - num_of_ant(hw_params(priv).valid_tx_ant); - if (cfg(priv)->rx_with_siso_diversity) - hw_params(priv).rx_chains_num = 1; - else - hw_params(priv).rx_chains_num = - num_of_ant(hw_params(priv).valid_rx_ant); - - iwl1000_set_ct_threshold(priv); - - /* Set initial sensitivity parameters */ - hw_params(priv).sens = &iwl1000_sensitivity; -} - -static struct iwl_lib_ops iwl1000_lib = { - .set_hw_params = iwl1000_hw_set_hw_params, - .nic_config = iwl1000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_REG_BAND_24_HT40_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - }, - }, - .temperature = iwlagn_temperature, -}; - -static const struct iwl_base_params iwl1000_base_params = { - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, - .max_ll_items = OTP_MAX_LL_ITEMS_1000, - .shadow_ram_support = false, - .led_compensation = 51, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .max_event_log_size = 128, - .wd_disable = true, -}; - -static const struct iwl_ht_params iwl1000_ht_params = { - .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ - .smps_mode = IEEE80211_SMPS_DYNAMIC, -}; - -#define IWL_DEVICE_1000 \ - .fw_name_pre = IWL1000_FW_PRE, \ - .ucode_api_max = IWL1000_UCODE_API_MAX, \ - .ucode_api_ok = IWL1000_UCODE_API_OK, \ - .ucode_api_min = IWL1000_UCODE_API_MIN, \ - .max_inst_size = IWLAGN_RTC_INST_SIZE, \ - .max_data_size = IWLAGN_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \ - .lib = &iwl1000_lib, \ - .base_params = &iwl1000_base_params, \ - .led_mode = IWL_LED_BLINK - -const struct iwl_cfg iwl1000_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 1000 BGN", - IWL_DEVICE_1000, - .ht_params = &iwl1000_ht_params, -}; - -const struct iwl_cfg iwl1000_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 1000 BG", - IWL_DEVICE_1000, -}; - -#define IWL_DEVICE_100 \ - .fw_name_pre = IWL100_FW_PRE, \ - .ucode_api_max = IWL100_UCODE_API_MAX, \ - .ucode_api_ok = IWL100_UCODE_API_OK, \ - .ucode_api_min = IWL100_UCODE_API_MIN, \ - .max_inst_size = IWLAGN_RTC_INST_SIZE, \ - .max_data_size = IWLAGN_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_1000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION, \ - .lib = &iwl1000_lib, \ - .base_params = &iwl1000_base_params, \ - .led_mode = IWL_LED_RF_STATE, \ - .rx_with_siso_diversity = true - -const struct iwl_cfg iwl100_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 100 BGN", - IWL_DEVICE_100, - .ht_params = &iwl1000_ht_params, -}; - -const struct iwl_cfg iwl100_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 100 BG", - IWL_DEVICE_100, -}; - -MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK)); diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-2000.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-2000.c deleted file mode 100644 index 4da050ff..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-2000.c +++ /dev/null @@ -1,334 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> -#include <linux/stringify.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-agn-hw.h" -#include "iwl-shared.h" -#include "iwl-cfg.h" - -/* Highest firmware API version supported */ -#define IWL2030_UCODE_API_MAX 6 -#define IWL2000_UCODE_API_MAX 6 -#define IWL105_UCODE_API_MAX 6 -#define IWL135_UCODE_API_MAX 6 - -/* Oldest version we won't warn about */ -#define IWL2030_UCODE_API_OK 6 -#define IWL2000_UCODE_API_OK 6 -#define IWL105_UCODE_API_OK 6 -#define IWL135_UCODE_API_OK 6 - -/* Lowest firmware API version supported */ -#define IWL2030_UCODE_API_MIN 5 -#define IWL2000_UCODE_API_MIN 5 -#define IWL105_UCODE_API_MIN 5 -#define IWL135_UCODE_API_MIN 5 - -#define IWL2030_FW_PRE "iwlwifi-2030-" -#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE __stringify(api) ".ucode" - -#define IWL2000_FW_PRE "iwlwifi-2000-" -#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE __stringify(api) ".ucode" - -#define IWL105_FW_PRE "iwlwifi-105-" -#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE __stringify(api) ".ucode" - -#define IWL135_FW_PRE "iwlwifi-135-" -#define IWL135_MODULE_FIRMWARE(api) IWL135_FW_PRE __stringify(api) ".ucode" - -static void iwl2000_set_ct_threshold(struct iwl_priv *priv) -{ - /* want Celsius */ - hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD; - hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; -} - -/* NIC configuration for 2000 series */ -static void iwl2000_nic_config(struct iwl_priv *priv) -{ - iwl_rf_config(priv); - - if (cfg(priv)->iq_invert) - iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, - CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER); -} - -static const struct iwl_sensitivity_ranges iwl2000_sensitivity = { - .min_nrg_cck = 97, - .auto_corr_min_ofdm = 80, - .auto_corr_min_ofdm_mrc = 128, - .auto_corr_min_ofdm_x1 = 105, - .auto_corr_min_ofdm_mrc_x1 = 192, - - .auto_corr_max_ofdm = 145, - .auto_corr_max_ofdm_mrc = 232, - .auto_corr_max_ofdm_x1 = 110, - .auto_corr_max_ofdm_mrc_x1 = 232, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 175, - .auto_corr_min_cck_mrc = 160, - .auto_corr_max_cck_mrc = 310, - .nrg_th_cck = 97, - .nrg_th_ofdm = 100, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -static void iwl2000_hw_set_hw_params(struct iwl_priv *priv) -{ - hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ); - - hw_params(priv).tx_chains_num = - num_of_ant(hw_params(priv).valid_tx_ant); - if (cfg(priv)->rx_with_siso_diversity) - hw_params(priv).rx_chains_num = 1; - else - hw_params(priv).rx_chains_num = - num_of_ant(hw_params(priv).valid_rx_ant); - - iwl2000_set_ct_threshold(priv); - - /* Set initial sensitivity parameters */ - hw_params(priv).sens = &iwl2000_sensitivity; -} - -static struct iwl_lib_ops iwl2000_lib = { - .set_hw_params = iwl2000_hw_set_hw_params, - .nic_config = iwl2000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_6000_REG_BAND_24_HT40_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - }, - .enhanced_txpower = true, - }, - .temperature = iwlagn_temperature, -}; - -static struct iwl_lib_ops iwl2030_lib = { - .set_hw_params = iwl2000_hw_set_hw_params, - .nic_config = iwl2000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_6000_REG_BAND_24_HT40_CHANNELS, - EEPROM_REGULATORY_BAND_NO_HT40, - }, - .enhanced_txpower = true, - }, - .temperature = iwlagn_temperature, -}; - -static const struct iwl_base_params iwl2000_base_params = { - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .pll_cfg_val = 0, - .max_ll_items = OTP_MAX_LL_ITEMS_2x00, - .shadow_ram_support = true, - .led_compensation = 51, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .max_event_log_size = 512, - .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ - .hd_v2 = true, -}; - - -static const struct iwl_base_params iwl2030_base_params = { - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .pll_cfg_val = 0, - .max_ll_items = OTP_MAX_LL_ITEMS_2x00, - .shadow_ram_support = true, - .led_compensation = 57, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_LONG_WD_TIMEOUT, - .max_event_log_size = 512, - .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ - .hd_v2 = true, -}; - -static const struct iwl_ht_params iwl2000_ht_params = { - .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ -}; - -static const struct iwl_bt_params iwl2030_bt_params = { - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .advanced_bt_coexist = true, - .agg_time_limit = BT_AGG_THRESHOLD_DEF, - .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, - .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, - .bt_sco_disable = true, - .bt_session_2 = true, -}; - -#define IWL_DEVICE_2000 \ - .fw_name_pre = IWL2000_FW_PRE, \ - .ucode_api_max = IWL2000_UCODE_API_MAX, \ - .ucode_api_ok = IWL2000_UCODE_API_OK, \ - .ucode_api_min = IWL2000_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ - .lib = &iwl2000_lib, \ - .base_params = &iwl2000_base_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .iq_invert = true \ - -const struct iwl_cfg iwl2000_2bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 2200 BGN", - IWL_DEVICE_2000, - .ht_params = &iwl2000_ht_params, -}; - -const struct iwl_cfg iwl2000_2bgn_d_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 2200D BGN", - IWL_DEVICE_2000, - .ht_params = &iwl2000_ht_params, -}; - -#define IWL_DEVICE_2030 \ - .fw_name_pre = IWL2030_FW_PRE, \ - .ucode_api_max = IWL2030_UCODE_API_MAX, \ - .ucode_api_ok = IWL2030_UCODE_API_OK, \ - .ucode_api_min = IWL2030_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ - .lib = &iwl2030_lib, \ - .base_params = &iwl2030_base_params, \ - .bt_params = &iwl2030_bt_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true, \ - .iq_invert = true \ - -const struct iwl_cfg iwl2030_2bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 2230 BGN", - IWL_DEVICE_2030, - .ht_params = &iwl2000_ht_params, -}; - -#define IWL_DEVICE_105 \ - .fw_name_pre = IWL105_FW_PRE, \ - .ucode_api_max = IWL105_UCODE_API_MAX, \ - .ucode_api_ok = IWL105_UCODE_API_OK, \ - .ucode_api_min = IWL105_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ - .lib = &iwl2000_lib, \ - .base_params = &iwl2000_base_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true, \ - .rx_with_siso_diversity = true, \ - .iq_invert = true \ - -const struct iwl_cfg iwl105_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 105 BGN", - IWL_DEVICE_105, - .ht_params = &iwl2000_ht_params, -}; - -const struct iwl_cfg iwl105_bgn_d_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 105D BGN", - IWL_DEVICE_105, - .ht_params = &iwl2000_ht_params, -}; - -#define IWL_DEVICE_135 \ - .fw_name_pre = IWL135_FW_PRE, \ - .ucode_api_max = IWL135_UCODE_API_MAX, \ - .ucode_api_ok = IWL135_UCODE_API_OK, \ - .ucode_api_min = IWL135_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_2000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ - .lib = &iwl2030_lib, \ - .base_params = &iwl2030_base_params, \ - .bt_params = &iwl2030_bt_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true, \ - .rx_with_siso_diversity = true, \ - .iq_invert = true \ - -const struct iwl_cfg iwl135_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 135 BGN", - IWL_DEVICE_135, - .ht_params = &iwl2000_ht_params, -}; - -MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_OK)); -MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_OK)); -MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_OK)); diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-5000.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-5000.c deleted file mode 100644 index de0920c7..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-5000.c +++ /dev/null @@ -1,420 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> -#include <linux/stringify.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-agn-hw.h" -#include "iwl-trans.h" -#include "iwl-shared.h" -#include "iwl-cfg.h" -#include "iwl-prph.h" - -/* Highest firmware API version supported */ -#define IWL5000_UCODE_API_MAX 5 -#define IWL5150_UCODE_API_MAX 2 - -/* Oldest version we won't warn about */ -#define IWL5000_UCODE_API_OK 5 -#define IWL5150_UCODE_API_OK 2 - -/* Lowest firmware API version supported */ -#define IWL5000_UCODE_API_MIN 1 -#define IWL5150_UCODE_API_MIN 1 - -#define IWL5000_FW_PRE "iwlwifi-5000-" -#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode" - -#define IWL5150_FW_PRE "iwlwifi-5150-" -#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode" - -/* NIC configuration for 5000 series */ -static void iwl5000_nic_config(struct iwl_priv *priv) -{ - iwl_rf_config(priv); - - /* W/A : NIC is stuck in a reset state after Early PCIe power off - * (PCIe power is lost before PERST# is asserted), - * causing ME FW to lose ownership and not being able to obtain it back. - */ - iwl_set_bits_mask_prph(trans(priv), APMG_PS_CTRL_REG, - APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, - ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); -} - -static const struct iwl_sensitivity_ranges iwl5000_sensitivity = { - .min_nrg_cck = 100, - .auto_corr_min_ofdm = 90, - .auto_corr_min_ofdm_mrc = 170, - .auto_corr_min_ofdm_x1 = 105, - .auto_corr_min_ofdm_mrc_x1 = 220, - - .auto_corr_max_ofdm = 120, - .auto_corr_max_ofdm_mrc = 210, - .auto_corr_max_ofdm_x1 = 120, - .auto_corr_max_ofdm_mrc_x1 = 240, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 200, - .auto_corr_min_cck_mrc = 200, - .auto_corr_max_cck_mrc = 400, - .nrg_th_cck = 100, - .nrg_th_ofdm = 100, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -static struct iwl_sensitivity_ranges iwl5150_sensitivity = { - .min_nrg_cck = 95, - .auto_corr_min_ofdm = 90, - .auto_corr_min_ofdm_mrc = 170, - .auto_corr_min_ofdm_x1 = 105, - .auto_corr_min_ofdm_mrc_x1 = 220, - - .auto_corr_max_ofdm = 120, - .auto_corr_max_ofdm_mrc = 210, - /* max = min for performance bug in 5150 DSP */ - .auto_corr_max_ofdm_x1 = 105, - .auto_corr_max_ofdm_mrc_x1 = 220, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 200, - .auto_corr_min_cck_mrc = 170, - .auto_corr_max_cck_mrc = 400, - .nrg_th_cck = 95, - .nrg_th_ofdm = 95, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 390, - .nrg_th_cca = 62, -}; - -#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF (-5) - -static s32 iwl_temp_calib_to_offset(struct iwl_shared *shrd) -{ - u16 temperature, voltage; - __le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(shrd, - EEPROM_KELVIN_TEMPERATURE); - - temperature = le16_to_cpu(temp_calib[0]); - voltage = le16_to_cpu(temp_calib[1]); - - /* offset = temp - volt / coeff */ - return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF); -} - -static void iwl5150_set_ct_threshold(struct iwl_priv *priv) -{ - const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF; - s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) - - iwl_temp_calib_to_offset(priv->shrd); - - hw_params(priv).ct_kill_threshold = threshold * volt2temp_coef; -} - -static void iwl5000_set_ct_threshold(struct iwl_priv *priv) -{ - /* want Celsius */ - hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY; -} - -static void iwl5000_hw_set_hw_params(struct iwl_priv *priv) -{ - hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ) | - BIT(IEEE80211_BAND_5GHZ); - - hw_params(priv).tx_chains_num = - num_of_ant(hw_params(priv).valid_tx_ant); - hw_params(priv).rx_chains_num = - num_of_ant(hw_params(priv).valid_rx_ant); - - iwl5000_set_ct_threshold(priv); - - /* Set initial sensitivity parameters */ - hw_params(priv).sens = &iwl5000_sensitivity; -} - -static void iwl5150_hw_set_hw_params(struct iwl_priv *priv) -{ - hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ) | - BIT(IEEE80211_BAND_5GHZ); - - hw_params(priv).tx_chains_num = - num_of_ant(hw_params(priv).valid_tx_ant); - hw_params(priv).rx_chains_num = - num_of_ant(hw_params(priv).valid_rx_ant); - - iwl5150_set_ct_threshold(priv); - - /* Set initial sensitivity parameters */ - hw_params(priv).sens = &iwl5150_sensitivity; -} - -static void iwl5150_temperature(struct iwl_priv *priv) -{ - u32 vt = 0; - s32 offset = iwl_temp_calib_to_offset(priv->shrd); - - vt = le32_to_cpu(priv->statistics.common.temperature); - vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset; - /* now vt hold the temperature in Kelvin */ - priv->temperature = KELVIN_TO_CELSIUS(vt); - iwl_tt_handler(priv); -} - -static int iwl5000_hw_channel_switch(struct iwl_priv *priv, - struct ieee80211_channel_switch *ch_switch) -{ - /* - * MULTI-FIXME - * See iwlagn_mac_channel_switch. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl5000_channel_switch_cmd cmd; - const struct iwl_channel_info *ch_info; - u32 switch_time_in_usec, ucode_switch_time; - u16 ch; - u32 tsf_low; - u8 switch_count; - u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); - struct ieee80211_vif *vif = ctx->vif; - struct iwl_host_cmd hcmd = { - .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, - .flags = CMD_SYNC, - .data = { &cmd, }, - }; - - cmd.band = priv->band == IEEE80211_BAND_2GHZ; - ch = ch_switch->channel->hw_value; - IWL_DEBUG_11H(priv, "channel switch from %d to %d\n", - ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; - switch_count = ch_switch->count; - tsf_low = ch_switch->timestamp & 0x0ffffffff; - /* - * calculate the ucode channel switch time - * adding TSF as one of the factor for when to switch - */ - if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { - if (switch_count > ((priv->ucode_beacon_time - tsf_low) / - beacon_interval)) { - switch_count -= (priv->ucode_beacon_time - - tsf_low) / beacon_interval; - } else - switch_count = 0; - } - if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); - else { - switch_time_in_usec = - vif->bss_conf.beacon_int * switch_count * TIME_UNIT; - ucode_switch_time = iwl_usecs_to_beacons(priv, - switch_time_in_usec, - beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); - } - IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - ch_info = iwl_get_channel_info(priv, priv->band, ch); - if (ch_info) - cmd.expect_beacon = is_channel_radar(ch_info); - else { - IWL_ERR(priv, "invalid channel switch from %u to %u\n", - ctx->active.channel, ch); - return -EFAULT; - } - - return iwl_dvm_send_cmd(priv, &hcmd); -} - -static struct iwl_lib_ops iwl5000_lib = { - .set_hw_params = iwl5000_hw_set_hw_params, - .set_channel_switch = iwl5000_hw_channel_switch, - .nic_config = iwl5000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_REG_BAND_24_HT40_CHANNELS, - EEPROM_REG_BAND_52_HT40_CHANNELS - }, - }, - .temperature = iwlagn_temperature, -}; - -static struct iwl_lib_ops iwl5150_lib = { - .set_hw_params = iwl5150_hw_set_hw_params, - .set_channel_switch = iwl5000_hw_channel_switch, - .nic_config = iwl5000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_REG_BAND_24_HT40_CHANNELS, - EEPROM_REG_BAND_52_HT40_CHANNELS - }, - }, - .temperature = iwl5150_temperature, -}; - -static const struct iwl_base_params iwl5000_base_params = { - .eeprom_size = IWLAGN_EEPROM_IMG_SIZE, - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, - .led_compensation = 51, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_LONG_WD_TIMEOUT, - .max_event_log_size = 512, - .no_idle_support = true, - .wd_disable = true, -}; - -static const struct iwl_ht_params iwl5000_ht_params = { - .ht_greenfield_support = true, -}; - -#define IWL_DEVICE_5000 \ - .fw_name_pre = IWL5000_FW_PRE, \ - .ucode_api_max = IWL5000_UCODE_API_MAX, \ - .ucode_api_ok = IWL5000_UCODE_API_OK, \ - .ucode_api_min = IWL5000_UCODE_API_MIN, \ - .max_inst_size = IWLAGN_RTC_INST_SIZE, \ - .max_data_size = IWLAGN_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_5000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, \ - .lib = &iwl5000_lib, \ - .base_params = &iwl5000_base_params, \ - .led_mode = IWL_LED_BLINK - -const struct iwl_cfg iwl5300_agn_cfg = { - .name = "Intel(R) Ultimate N WiFi Link 5300 AGN", - IWL_DEVICE_5000, - /* at least EEPROM 0x11A has wrong info */ - .valid_tx_ant = ANT_ABC, /* .cfg overwrite */ - .valid_rx_ant = ANT_ABC, /* .cfg overwrite */ - .ht_params = &iwl5000_ht_params, -}; - -const struct iwl_cfg iwl5100_bgn_cfg = { - .name = "Intel(R) WiFi Link 5100 BGN", - IWL_DEVICE_5000, - .valid_tx_ant = ANT_B, /* .cfg overwrite */ - .valid_rx_ant = ANT_AB, /* .cfg overwrite */ - .ht_params = &iwl5000_ht_params, -}; - -const struct iwl_cfg iwl5100_abg_cfg = { - .name = "Intel(R) WiFi Link 5100 ABG", - IWL_DEVICE_5000, - .valid_tx_ant = ANT_B, /* .cfg overwrite */ - .valid_rx_ant = ANT_AB, /* .cfg overwrite */ -}; - -const struct iwl_cfg iwl5100_agn_cfg = { - .name = "Intel(R) WiFi Link 5100 AGN", - IWL_DEVICE_5000, - .valid_tx_ant = ANT_B, /* .cfg overwrite */ - .valid_rx_ant = ANT_AB, /* .cfg overwrite */ - .ht_params = &iwl5000_ht_params, -}; - -const struct iwl_cfg iwl5350_agn_cfg = { - .name = "Intel(R) WiMAX/WiFi Link 5350 AGN", - .fw_name_pre = IWL5000_FW_PRE, - .ucode_api_max = IWL5000_UCODE_API_MAX, - .ucode_api_ok = IWL5000_UCODE_API_OK, - .ucode_api_min = IWL5000_UCODE_API_MIN, - .max_inst_size = IWLAGN_RTC_INST_SIZE, - .max_data_size = IWLAGN_RTC_DATA_SIZE, - .eeprom_ver = EEPROM_5050_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, - .lib = &iwl5000_lib, - .base_params = &iwl5000_base_params, - .ht_params = &iwl5000_ht_params, - .led_mode = IWL_LED_BLINK, - .internal_wimax_coex = true, -}; - -#define IWL_DEVICE_5150 \ - .fw_name_pre = IWL5150_FW_PRE, \ - .ucode_api_max = IWL5150_UCODE_API_MAX, \ - .ucode_api_ok = IWL5150_UCODE_API_OK, \ - .ucode_api_min = IWL5150_UCODE_API_MIN, \ - .max_inst_size = IWLAGN_RTC_INST_SIZE, \ - .max_data_size = IWLAGN_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_5050_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION, \ - .lib = &iwl5150_lib, \ - .base_params = &iwl5000_base_params, \ - .no_xtal_calib = true, \ - .led_mode = IWL_LED_BLINK, \ - .internal_wimax_coex = true - -const struct iwl_cfg iwl5150_agn_cfg = { - .name = "Intel(R) WiMAX/WiFi Link 5150 AGN", - IWL_DEVICE_5150, - .ht_params = &iwl5000_ht_params, - -}; - -const struct iwl_cfg iwl5150_abg_cfg = { - .name = "Intel(R) WiMAX/WiFi Link 5150 ABG", - IWL_DEVICE_5150, -}; - -MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_OK)); diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-6000.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-6000.c deleted file mode 100644 index c0cfa4e6..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-6000.c +++ /dev/null @@ -1,583 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> -#include <linux/stringify.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-agn-hw.h" -#include "iwl-trans.h" -#include "iwl-shared.h" -#include "iwl-cfg.h" - -/* Highest firmware API version supported */ -#define IWL6000_UCODE_API_MAX 6 -#define IWL6050_UCODE_API_MAX 5 -#define IWL6000G2_UCODE_API_MAX 6 -#define IWL6035_UCODE_API_MAX 6 - -/* Oldest version we won't warn about */ -#define IWL6000_UCODE_API_OK 4 -#define IWL6000G2_UCODE_API_OK 5 -#define IWL6050_UCODE_API_OK 5 -#define IWL6000G2B_UCODE_API_OK 6 -#define IWL6035_UCODE_API_OK 6 - -/* Lowest firmware API version supported */ -#define IWL6000_UCODE_API_MIN 4 -#define IWL6050_UCODE_API_MIN 4 -#define IWL6000G2_UCODE_API_MIN 5 -#define IWL6035_UCODE_API_MIN 6 - -#define IWL6000_FW_PRE "iwlwifi-6000-" -#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode" - -#define IWL6050_FW_PRE "iwlwifi-6050-" -#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode" - -#define IWL6005_FW_PRE "iwlwifi-6000g2a-" -#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode" - -#define IWL6030_FW_PRE "iwlwifi-6000g2b-" -#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode" - -static void iwl6000_set_ct_threshold(struct iwl_priv *priv) -{ - /* want Celsius */ - hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD; - hw_params(priv).ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD; -} - -static void iwl6050_additional_nic_config(struct iwl_priv *priv) -{ - /* Indicate calibration version to uCode. */ - if (iwl_eeprom_calib_version(priv->shrd) >= 6) - iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, - CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); -} - -static void iwl6150_additional_nic_config(struct iwl_priv *priv) -{ - /* Indicate calibration version to uCode. */ - if (iwl_eeprom_calib_version(priv->shrd) >= 6) - iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, - CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6); - iwl_set_bit(trans(priv), CSR_GP_DRIVER_REG, - CSR_GP_DRIVER_REG_BIT_6050_1x2); -} - -static void iwl6000i_additional_nic_config(struct iwl_priv *priv) -{ - /* 2x2 IPA phy type */ - iwl_write32(trans(priv), CSR_GP_DRIVER_REG, - CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA); -} - -/* NIC configuration for 6000 series */ -static void iwl6000_nic_config(struct iwl_priv *priv) -{ - iwl_rf_config(priv); - - /* do additional nic configuration if needed */ - if (cfg(priv)->additional_nic_config) - cfg(priv)->additional_nic_config(priv); -} - -static const struct iwl_sensitivity_ranges iwl6000_sensitivity = { - .min_nrg_cck = 110, - .auto_corr_min_ofdm = 80, - .auto_corr_min_ofdm_mrc = 128, - .auto_corr_min_ofdm_x1 = 105, - .auto_corr_min_ofdm_mrc_x1 = 192, - - .auto_corr_max_ofdm = 145, - .auto_corr_max_ofdm_mrc = 232, - .auto_corr_max_ofdm_x1 = 110, - .auto_corr_max_ofdm_mrc_x1 = 232, - - .auto_corr_min_cck = 125, - .auto_corr_max_cck = 175, - .auto_corr_min_cck_mrc = 160, - .auto_corr_max_cck_mrc = 310, - .nrg_th_cck = 110, - .nrg_th_ofdm = 110, - - .barker_corr_th_min = 190, - .barker_corr_th_min_mrc = 336, - .nrg_th_cca = 62, -}; - -static void iwl6000_hw_set_hw_params(struct iwl_priv *priv) -{ - hw_params(priv).ht40_channel = BIT(IEEE80211_BAND_2GHZ) | - BIT(IEEE80211_BAND_5GHZ); - - hw_params(priv).tx_chains_num = - num_of_ant(hw_params(priv).valid_tx_ant); - if (cfg(priv)->rx_with_siso_diversity) - hw_params(priv).rx_chains_num = 1; - else - hw_params(priv).rx_chains_num = - num_of_ant(hw_params(priv).valid_rx_ant); - - iwl6000_set_ct_threshold(priv); - - /* Set initial sensitivity parameters */ - hw_params(priv).sens = &iwl6000_sensitivity; - -} - -static int iwl6000_hw_channel_switch(struct iwl_priv *priv, - struct ieee80211_channel_switch *ch_switch) -{ - /* - * MULTI-FIXME - * See iwlagn_mac_channel_switch. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl6000_channel_switch_cmd cmd; - const struct iwl_channel_info *ch_info; - u32 switch_time_in_usec, ucode_switch_time; - u16 ch; - u32 tsf_low; - u8 switch_count; - u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); - struct ieee80211_vif *vif = ctx->vif; - struct iwl_host_cmd hcmd = { - .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, - .flags = CMD_SYNC, - .data = { &cmd, }, - }; - - cmd.band = priv->band == IEEE80211_BAND_2GHZ; - ch = ch_switch->channel->hw_value; - IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", - ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; - switch_count = ch_switch->count; - tsf_low = ch_switch->timestamp & 0x0ffffffff; - /* - * calculate the ucode channel switch time - * adding TSF as one of the factor for when to switch - */ - if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { - if (switch_count > ((priv->ucode_beacon_time - tsf_low) / - beacon_interval)) { - switch_count -= (priv->ucode_beacon_time - - tsf_low) / beacon_interval; - } else - switch_count = 0; - } - if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); - else { - switch_time_in_usec = - vif->bss_conf.beacon_int * switch_count * TIME_UNIT; - ucode_switch_time = iwl_usecs_to_beacons(priv, - switch_time_in_usec, - beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); - } - IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - ch_info = iwl_get_channel_info(priv, priv->band, ch); - if (ch_info) - cmd.expect_beacon = is_channel_radar(ch_info); - else { - IWL_ERR(priv, "invalid channel switch from %u to %u\n", - ctx->active.channel, ch); - return -EFAULT; - } - - return iwl_dvm_send_cmd(priv, &hcmd); -} - -static struct iwl_lib_ops iwl6000_lib = { - .set_hw_params = iwl6000_hw_set_hw_params, - .set_channel_switch = iwl6000_hw_channel_switch, - .nic_config = iwl6000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_6000_REG_BAND_24_HT40_CHANNELS, - EEPROM_REG_BAND_52_HT40_CHANNELS - }, - .enhanced_txpower = true, - }, - .temperature = iwlagn_temperature, -}; - -static struct iwl_lib_ops iwl6030_lib = { - .set_hw_params = iwl6000_hw_set_hw_params, - .set_channel_switch = iwl6000_hw_channel_switch, - .nic_config = iwl6000_nic_config, - .eeprom_ops = { - .regulatory_bands = { - EEPROM_REG_BAND_1_CHANNELS, - EEPROM_REG_BAND_2_CHANNELS, - EEPROM_REG_BAND_3_CHANNELS, - EEPROM_REG_BAND_4_CHANNELS, - EEPROM_REG_BAND_5_CHANNELS, - EEPROM_6000_REG_BAND_24_HT40_CHANNELS, - EEPROM_REG_BAND_52_HT40_CHANNELS - }, - .enhanced_txpower = true, - }, - .temperature = iwlagn_temperature, -}; - -static const struct iwl_base_params iwl6000_base_params = { - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .pll_cfg_val = 0, - .max_ll_items = OTP_MAX_LL_ITEMS_6x00, - .shadow_ram_support = true, - .led_compensation = 51, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .max_event_log_size = 512, - .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ -}; - -static const struct iwl_base_params iwl6050_base_params = { - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .pll_cfg_val = 0, - .max_ll_items = OTP_MAX_LL_ITEMS_6x50, - .shadow_ram_support = true, - .led_compensation = 51, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1500, - .wd_timeout = IWL_DEF_WD_TIMEOUT, - .max_event_log_size = 1024, - .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ -}; - -static const struct iwl_base_params iwl6000_g2_base_params = { - .eeprom_size = OTP_LOW_IMAGE_SIZE, - .num_of_queues = IWLAGN_NUM_QUEUES, - .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES, - .pll_cfg_val = 0, - .max_ll_items = OTP_MAX_LL_ITEMS_6x00, - .shadow_ram_support = true, - .led_compensation = 57, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, - .wd_timeout = IWL_LONG_WD_TIMEOUT, - .max_event_log_size = 512, - .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ -}; - -static const struct iwl_ht_params iwl6000_ht_params = { - .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ -}; - -static const struct iwl_bt_params iwl6000_bt_params = { - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .advanced_bt_coexist = true, - .agg_time_limit = BT_AGG_THRESHOLD_DEF, - .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, - .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, - .bt_sco_disable = true, -}; - -#define IWL_DEVICE_6005 \ - .fw_name_pre = IWL6005_FW_PRE, \ - .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ - .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_6005_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \ - .lib = &iwl6000_lib, \ - .base_params = &iwl6000_g2_base_params, \ - .need_temp_offset_calib = true, \ - .led_mode = IWL_LED_RF_STATE - -const struct iwl_cfg iwl6005_2agn_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6205 AGN", - IWL_DEVICE_6005, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6005_2abg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6205 ABG", - IWL_DEVICE_6005, -}; - -const struct iwl_cfg iwl6005_2bg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6205 BG", - IWL_DEVICE_6005, -}; - -const struct iwl_cfg iwl6005_2agn_sff_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6205S AGN", - IWL_DEVICE_6005, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6005_2agn_d_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6205D AGN", - IWL_DEVICE_6005, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6005_2agn_mow1_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6206 AGN", - IWL_DEVICE_6005, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6005_2agn_mow2_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6207 AGN", - IWL_DEVICE_6005, - .ht_params = &iwl6000_ht_params, -}; - -#define IWL_DEVICE_6030 \ - .fw_name_pre = IWL6030_FW_PRE, \ - .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ - .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ - .lib = &iwl6030_lib, \ - .base_params = &iwl6000_g2_base_params, \ - .bt_params = &iwl6000_bt_params, \ - .need_temp_offset_calib = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true \ - -const struct iwl_cfg iwl6030_2agn_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN", - IWL_DEVICE_6030, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6030_2abg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6230 ABG", - IWL_DEVICE_6030, -}; - -const struct iwl_cfg iwl6030_2bgn_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6230 BGN", - IWL_DEVICE_6030, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6030_2bg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6230 BG", - IWL_DEVICE_6030, -}; - -#define IWL_DEVICE_6035 \ - .fw_name_pre = IWL6030_FW_PRE, \ - .ucode_api_max = IWL6035_UCODE_API_MAX, \ - .ucode_api_ok = IWL6035_UCODE_API_OK, \ - .ucode_api_min = IWL6035_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ - .lib = &iwl6030_lib, \ - .base_params = &iwl6000_g2_base_params, \ - .bt_params = &iwl6000_bt_params, \ - .need_temp_offset_calib = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true - -const struct iwl_cfg iwl6035_2agn_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6235 AGN", - IWL_DEVICE_6035, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl1030_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 1030 BGN", - IWL_DEVICE_6030, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl1030_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 1030 BG", - IWL_DEVICE_6030, -}; - -const struct iwl_cfg iwl130_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 130 BGN", - IWL_DEVICE_6030, - .ht_params = &iwl6000_ht_params, - .rx_with_siso_diversity = true, -}; - -const struct iwl_cfg iwl130_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N 130 BG", - IWL_DEVICE_6030, - .rx_with_siso_diversity = true, -}; - -/* - * "i": Internal configuration, use internal Power Amplifier - */ -#define IWL_DEVICE_6000i \ - .fw_name_pre = IWL6000_FW_PRE, \ - .ucode_api_max = IWL6000_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000_UCODE_API_OK, \ - .ucode_api_min = IWL6000_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .valid_tx_ant = ANT_BC, /* .cfg overwrite */ \ - .valid_rx_ant = ANT_BC, /* .cfg overwrite */ \ - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, \ - .lib = &iwl6000_lib, \ - .additional_nic_config = iwl6000i_additional_nic_config,\ - .base_params = &iwl6000_base_params, \ - .led_mode = IWL_LED_BLINK - -const struct iwl_cfg iwl6000i_2agn_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6200 AGN", - IWL_DEVICE_6000i, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6000i_2abg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6200 ABG", - IWL_DEVICE_6000i, -}; - -const struct iwl_cfg iwl6000i_2bg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N 6200 BG", - IWL_DEVICE_6000i, -}; - -#define IWL_DEVICE_6050 \ - .fw_name_pre = IWL6050_FW_PRE, \ - .ucode_api_max = IWL6050_UCODE_API_MAX, \ - .ucode_api_min = IWL6050_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .valid_tx_ant = ANT_AB, /* .cfg overwrite */ \ - .valid_rx_ant = ANT_AB, /* .cfg overwrite */ \ - .lib = &iwl6000_lib, \ - .additional_nic_config = iwl6050_additional_nic_config, \ - .eeprom_ver = EEPROM_6050_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \ - .base_params = &iwl6050_base_params, \ - .led_mode = IWL_LED_BLINK, \ - .internal_wimax_coex = true - -const struct iwl_cfg iwl6050_2agn_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN", - IWL_DEVICE_6050, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6050_2abg_cfg = { - .name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG", - IWL_DEVICE_6050, -}; - -#define IWL_DEVICE_6150 \ - .fw_name_pre = IWL6050_FW_PRE, \ - .ucode_api_max = IWL6050_UCODE_API_MAX, \ - .ucode_api_min = IWL6050_UCODE_API_MIN, \ - .max_inst_size = IWL60_RTC_INST_SIZE, \ - .max_data_size = IWL60_RTC_DATA_SIZE, \ - .lib = &iwl6000_lib, \ - .additional_nic_config = iwl6150_additional_nic_config, \ - .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \ - .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \ - .base_params = &iwl6050_base_params, \ - .led_mode = IWL_LED_BLINK, \ - .internal_wimax_coex = true - -const struct iwl_cfg iwl6150_bgn_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN", - IWL_DEVICE_6150, - .ht_params = &iwl6000_ht_params, -}; - -const struct iwl_cfg iwl6150_bg_cfg = { - .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG", - IWL_DEVICE_6150, -}; - -const struct iwl_cfg iwl6000_3agn_cfg = { - .name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN", - .fw_name_pre = IWL6000_FW_PRE, - .ucode_api_max = IWL6000_UCODE_API_MAX, - .ucode_api_ok = IWL6000_UCODE_API_OK, - .ucode_api_min = IWL6000_UCODE_API_MIN, - .max_inst_size = IWL60_RTC_INST_SIZE, - .max_data_size = IWL60_RTC_DATA_SIZE, - .eeprom_ver = EEPROM_6000_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION, - .lib = &iwl6000_lib, - .base_params = &iwl6000_base_params, - .ht_params = &iwl6000_ht_params, - .led_mode = IWL_LED_BLINK, -}; - -MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK)); diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-calib.c deleted file mode 100644 index 84cbe7bb..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-calib.c +++ /dev/null @@ -1,1113 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#include <linux/slab.h> -#include <net/mac80211.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-agn-calib.h" -#include "iwl-trans.h" -#include "iwl-agn.h" - -/***************************************************************************** - * INIT calibrations framework - *****************************************************************************/ - -/* Opaque calibration results */ -struct iwl_calib_result { - struct list_head list; - size_t cmd_len; - struct iwl_calib_hdr hdr; - /* data follows */ -}; - -struct statistics_general_data { - u32 beacon_silence_rssi_a; - u32 beacon_silence_rssi_b; - u32 beacon_silence_rssi_c; - u32 beacon_energy_a; - u32 beacon_energy_b; - u32 beacon_energy_c; -}; - -int iwl_send_calib_results(struct iwl_priv *priv) -{ - struct iwl_host_cmd hcmd = { - .id = REPLY_PHY_CALIBRATION_CMD, - .flags = CMD_SYNC, - }; - struct iwl_calib_result *res; - - list_for_each_entry(res, &priv->calib_results, list) { - int ret; - - hcmd.len[0] = res->cmd_len; - hcmd.data[0] = &res->hdr; - hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - ret = iwl_dvm_send_cmd(priv, &hcmd); - if (ret) { - IWL_ERR(priv, "Error %d on calib cmd %d\n", - ret, res->hdr.op_code); - return ret; - } - } - - return 0; -} - -int iwl_calib_set(struct iwl_priv *priv, - const struct iwl_calib_hdr *cmd, int len) -{ - struct iwl_calib_result *res, *tmp; - - res = kmalloc(sizeof(*res) + len - sizeof(struct iwl_calib_hdr), - GFP_ATOMIC); - if (!res) - return -ENOMEM; - memcpy(&res->hdr, cmd, len); - res->cmd_len = len; - - list_for_each_entry(tmp, &priv->calib_results, list) { - if (tmp->hdr.op_code == res->hdr.op_code) { - list_replace(&tmp->list, &res->list); - kfree(tmp); - return 0; - } - } - - /* wasn't in list already */ - list_add_tail(&res->list, &priv->calib_results); - - return 0; -} - -void iwl_calib_free_results(struct iwl_priv *priv) -{ - struct iwl_calib_result *res, *tmp; - - list_for_each_entry_safe(res, tmp, &priv->calib_results, list) { - list_del(&res->list); - kfree(res); - } -} - -/***************************************************************************** - * RUNTIME calibrations framework - *****************************************************************************/ - -/* "false alarms" are signals that our DSP tries to lock onto, - * but then determines that they are either noise, or transmissions - * from a distant wireless network (also "noise", really) that get - * "stepped on" by stronger transmissions within our own network. - * This algorithm attempts to set a sensitivity level that is high - * enough to receive all of our own network traffic, but not so - * high that our DSP gets too busy trying to lock onto non-network - * activity/noise. */ -static int iwl_sens_energy_cck(struct iwl_priv *priv, - u32 norm_fa, - u32 rx_enable_time, - struct statistics_general_data *rx_info) -{ - u32 max_nrg_cck = 0; - int i = 0; - u8 max_silence_rssi = 0; - u32 silence_ref = 0; - u8 silence_rssi_a = 0; - u8 silence_rssi_b = 0; - u8 silence_rssi_c = 0; - u32 val; - - /* "false_alarms" values below are cross-multiplications to assess the - * numbers of false alarms within the measured period of actual Rx - * (Rx is off when we're txing), vs the min/max expected false alarms - * (some should be expected if rx is sensitive enough) in a - * hypothetical listening period of 200 time units (TU), 204.8 msec: - * - * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time - * - * */ - u32 false_alarms = norm_fa * 200 * 1024; - u32 max_false_alarms = MAX_FA_CCK * rx_enable_time; - u32 min_false_alarms = MIN_FA_CCK * rx_enable_time; - struct iwl_sensitivity_data *data = NULL; - const struct iwl_sensitivity_ranges *ranges = hw_params(priv).sens; - - data = &(priv->sensitivity_data); - - data->nrg_auto_corr_silence_diff = 0; - - /* Find max silence rssi among all 3 receivers. - * This is background noise, which may include transmissions from other - * networks, measured during silence before our network's beacon */ - silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a & - ALL_BAND_FILTER) >> 8); - silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b & - ALL_BAND_FILTER) >> 8); - silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c & - ALL_BAND_FILTER) >> 8); - - val = max(silence_rssi_b, silence_rssi_c); - max_silence_rssi = max(silence_rssi_a, (u8) val); - - /* Store silence rssi in 20-beacon history table */ - data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi; - data->nrg_silence_idx++; - if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L) - data->nrg_silence_idx = 0; - - /* Find max silence rssi across 20 beacon history */ - for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) { - val = data->nrg_silence_rssi[i]; - silence_ref = max(silence_ref, val); - } - IWL_DEBUG_CALIB(priv, "silence a %u, b %u, c %u, 20-bcn max %u\n", - silence_rssi_a, silence_rssi_b, silence_rssi_c, - silence_ref); - - /* Find max rx energy (min value!) among all 3 receivers, - * measured during beacon frame. - * Save it in 10-beacon history table. */ - i = data->nrg_energy_idx; - val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c); - data->nrg_value[i] = min(rx_info->beacon_energy_a, val); - - data->nrg_energy_idx++; - if (data->nrg_energy_idx >= 10) - data->nrg_energy_idx = 0; - - /* Find min rx energy (max value) across 10 beacon history. - * This is the minimum signal level that we want to receive well. - * Add backoff (margin so we don't miss slightly lower energy frames). - * This establishes an upper bound (min value) for energy threshold. */ - max_nrg_cck = data->nrg_value[0]; - for (i = 1; i < 10; i++) - max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i])); - max_nrg_cck += 6; - - IWL_DEBUG_CALIB(priv, "rx energy a %u, b %u, c %u, 10-bcn max/min %u\n", - rx_info->beacon_energy_a, rx_info->beacon_energy_b, - rx_info->beacon_energy_c, max_nrg_cck - 6); - - /* Count number of consecutive beacons with fewer-than-desired - * false alarms. */ - if (false_alarms < min_false_alarms) - data->num_in_cck_no_fa++; - else - data->num_in_cck_no_fa = 0; - IWL_DEBUG_CALIB(priv, "consecutive bcns with few false alarms = %u\n", - data->num_in_cck_no_fa); - - /* If we got too many false alarms this time, reduce sensitivity */ - if ((false_alarms > max_false_alarms) && - (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) { - IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u\n", - false_alarms, max_false_alarms); - IWL_DEBUG_CALIB(priv, "... reducing sensitivity\n"); - data->nrg_curr_state = IWL_FA_TOO_MANY; - /* Store for "fewer than desired" on later beacon */ - data->nrg_silence_ref = silence_ref; - - /* increase energy threshold (reduce nrg value) - * to decrease sensitivity */ - data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK; - /* Else if we got fewer than desired, increase sensitivity */ - } else if (false_alarms < min_false_alarms) { - data->nrg_curr_state = IWL_FA_TOO_FEW; - - /* Compare silence level with silence level for most recent - * healthy number or too many false alarms */ - data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref - - (s32)silence_ref; - - IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u, silence diff %d\n", - false_alarms, min_false_alarms, - data->nrg_auto_corr_silence_diff); - - /* Increase value to increase sensitivity, but only if: - * 1a) previous beacon did *not* have *too many* false alarms - * 1b) AND there's a significant difference in Rx levels - * from a previous beacon with too many, or healthy # FAs - * OR 2) We've seen a lot of beacons (100) with too few - * false alarms */ - if ((data->nrg_prev_state != IWL_FA_TOO_MANY) && - ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || - (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { - - IWL_DEBUG_CALIB(priv, "... increasing sensitivity\n"); - /* Increase nrg value to increase sensitivity */ - val = data->nrg_th_cck + NRG_STEP_CCK; - data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val); - } else { - IWL_DEBUG_CALIB(priv, "... but not changing sensitivity\n"); - } - - /* Else we got a healthy number of false alarms, keep status quo */ - } else { - IWL_DEBUG_CALIB(priv, " FA in safe zone\n"); - data->nrg_curr_state = IWL_FA_GOOD_RANGE; - - /* Store for use in "fewer than desired" with later beacon */ - data->nrg_silence_ref = silence_ref; - - /* If previous beacon had too many false alarms, - * give it some extra margin by reducing sensitivity again - * (but don't go below measured energy of desired Rx) */ - if (IWL_FA_TOO_MANY == data->nrg_prev_state) { - IWL_DEBUG_CALIB(priv, "... increasing margin\n"); - if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN)) - data->nrg_th_cck -= NRG_MARGIN; - else - data->nrg_th_cck = max_nrg_cck; - } - } - - /* Make sure the energy threshold does not go above the measured - * energy of the desired Rx signals (reduced by backoff margin), - * or else we might start missing Rx frames. - * Lower value is higher energy, so we use max()! - */ - data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck); - IWL_DEBUG_CALIB(priv, "new nrg_th_cck %u\n", data->nrg_th_cck); - - data->nrg_prev_state = data->nrg_curr_state; - - /* Auto-correlation CCK algorithm */ - if (false_alarms > min_false_alarms) { - - /* increase auto_corr values to decrease sensitivity - * so the DSP won't be disturbed by the noise - */ - if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK) - data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1; - else { - val = data->auto_corr_cck + AUTO_CORR_STEP_CCK; - data->auto_corr_cck = - min((u32)ranges->auto_corr_max_cck, val); - } - val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK; - data->auto_corr_cck_mrc = - min((u32)ranges->auto_corr_max_cck_mrc, val); - } else if ((false_alarms < min_false_alarms) && - ((data->nrg_auto_corr_silence_diff > NRG_DIFF) || - (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) { - - /* Decrease auto_corr values to increase sensitivity */ - val = data->auto_corr_cck - AUTO_CORR_STEP_CCK; - data->auto_corr_cck = - max((u32)ranges->auto_corr_min_cck, val); - val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK; - data->auto_corr_cck_mrc = - max((u32)ranges->auto_corr_min_cck_mrc, val); - } - - return 0; -} - - -static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv, - u32 norm_fa, - u32 rx_enable_time) -{ - u32 val; - u32 false_alarms = norm_fa * 200 * 1024; - u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time; - u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time; - struct iwl_sensitivity_data *data = NULL; - const struct iwl_sensitivity_ranges *ranges = hw_params(priv).sens; - - data = &(priv->sensitivity_data); - - /* If we got too many false alarms this time, reduce sensitivity */ - if (false_alarms > max_false_alarms) { - - IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u)\n", - false_alarms, max_false_alarms); - - val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm = - min((u32)ranges->auto_corr_max_ofdm, val); - - val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc = - min((u32)ranges->auto_corr_max_ofdm_mrc, val); - - val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_x1 = - min((u32)ranges->auto_corr_max_ofdm_x1, val); - - val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc_x1 = - min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val); - } - - /* Else if we got fewer than desired, increase sensitivity */ - else if (false_alarms < min_false_alarms) { - - IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u\n", - false_alarms, min_false_alarms); - - val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm = - max((u32)ranges->auto_corr_min_ofdm, val); - - val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc = - max((u32)ranges->auto_corr_min_ofdm_mrc, val); - - val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_x1 = - max((u32)ranges->auto_corr_min_ofdm_x1, val); - - val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM; - data->auto_corr_ofdm_mrc_x1 = - max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val); - } else { - IWL_DEBUG_CALIB(priv, "min FA %u < norm FA %u < max FA %u OK\n", - min_false_alarms, false_alarms, max_false_alarms); - } - return 0; -} - -static void iwl_prepare_legacy_sensitivity_tbl(struct iwl_priv *priv, - struct iwl_sensitivity_data *data, - __le16 *tbl) -{ - tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm); - tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_mrc); - tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_x1); - tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1); - - tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] = - cpu_to_le16((u16)data->auto_corr_cck); - tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16((u16)data->auto_corr_cck_mrc); - - tbl[HD_MIN_ENERGY_CCK_DET_INDEX] = - cpu_to_le16((u16)data->nrg_th_cck); - tbl[HD_MIN_ENERGY_OFDM_DET_INDEX] = - cpu_to_le16((u16)data->nrg_th_ofdm); - - tbl[HD_BARKER_CORR_TH_ADD_MIN_INDEX] = - cpu_to_le16(data->barker_corr_th_min); - tbl[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] = - cpu_to_le16(data->barker_corr_th_min_mrc); - tbl[HD_OFDM_ENERGY_TH_IN_INDEX] = - cpu_to_le16(data->nrg_th_cca); - - IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n", - data->auto_corr_ofdm, data->auto_corr_ofdm_mrc, - data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1, - data->nrg_th_ofdm); - - IWL_DEBUG_CALIB(priv, "cck: ac %u mrc %u thresh %u\n", - data->auto_corr_cck, data->auto_corr_cck_mrc, - data->nrg_th_cck); -} - -/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ -static int iwl_sensitivity_write(struct iwl_priv *priv) -{ - struct iwl_sensitivity_cmd cmd; - struct iwl_sensitivity_data *data = NULL; - struct iwl_host_cmd cmd_out = { - .id = SENSITIVITY_CMD, - .len = { sizeof(struct iwl_sensitivity_cmd), }, - .flags = CMD_ASYNC, - .data = { &cmd, }, - }; - - data = &(priv->sensitivity_data); - - memset(&cmd, 0, sizeof(cmd)); - - iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.table[0]); - - /* Update uCode's "work" table, and copy it to DSP */ - cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; - - /* Don't send command to uCode if nothing has changed */ - if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]), - sizeof(u16)*HD_TABLE_SIZE)) { - IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n"); - return 0; - } - - /* Copy table for comparison next time */ - memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), - sizeof(u16)*HD_TABLE_SIZE); - - return iwl_dvm_send_cmd(priv, &cmd_out); -} - -/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ -static int iwl_enhance_sensitivity_write(struct iwl_priv *priv) -{ - struct iwl_enhance_sensitivity_cmd cmd; - struct iwl_sensitivity_data *data = NULL; - struct iwl_host_cmd cmd_out = { - .id = SENSITIVITY_CMD, - .len = { sizeof(struct iwl_enhance_sensitivity_cmd), }, - .flags = CMD_ASYNC, - .data = { &cmd, }, - }; - - data = &(priv->sensitivity_data); - - memset(&cmd, 0, sizeof(cmd)); - - iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.enhance_table[0]); - - if (cfg(priv)->base_params->hd_v2) { - cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] = - HD_INA_NON_SQUARE_DET_OFDM_DATA_V2; - cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] = - HD_INA_NON_SQUARE_DET_CCK_DATA_V2; - cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] = - HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] = - HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = - HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] = - HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] = - HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] = - HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = - HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] = - HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] = - HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2; - } else { - cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] = - HD_INA_NON_SQUARE_DET_OFDM_DATA_V1; - cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] = - HD_INA_NON_SQUARE_DET_CCK_DATA_V1; - cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] = - HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] = - HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = - HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] = - HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1; - cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] = - HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] = - HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] = - HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] = - HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1; - cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] = - HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1; - } - - /* Update uCode's "work" table, and copy it to DSP */ - cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE; - - /* Don't send command to uCode if nothing has changed */ - if (!memcmp(&cmd.enhance_table[0], &(priv->sensitivity_tbl[0]), - sizeof(u16)*HD_TABLE_SIZE) && - !memcmp(&cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX], - &(priv->enhance_sensitivity_tbl[0]), - sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES)) { - IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n"); - return 0; - } - - /* Copy table for comparison next time */ - memcpy(&(priv->sensitivity_tbl[0]), &(cmd.enhance_table[0]), - sizeof(u16)*HD_TABLE_SIZE); - memcpy(&(priv->enhance_sensitivity_tbl[0]), - &(cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX]), - sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES); - - return iwl_dvm_send_cmd(priv, &cmd_out); -} - -void iwl_init_sensitivity(struct iwl_priv *priv) -{ - int ret = 0; - int i; - struct iwl_sensitivity_data *data = NULL; - const struct iwl_sensitivity_ranges *ranges = hw_params(priv).sens; - - if (priv->disable_sens_cal) - return; - - IWL_DEBUG_CALIB(priv, "Start iwl_init_sensitivity\n"); - - /* Clear driver's sensitivity algo data */ - data = &(priv->sensitivity_data); - - if (ranges == NULL) - return; - - memset(data, 0, sizeof(struct iwl_sensitivity_data)); - - data->num_in_cck_no_fa = 0; - data->nrg_curr_state = IWL_FA_TOO_MANY; - data->nrg_prev_state = IWL_FA_TOO_MANY; - data->nrg_silence_ref = 0; - data->nrg_silence_idx = 0; - data->nrg_energy_idx = 0; - - for (i = 0; i < 10; i++) - data->nrg_value[i] = 0; - - for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) - data->nrg_silence_rssi[i] = 0; - - data->auto_corr_ofdm = ranges->auto_corr_min_ofdm; - data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc; - data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1; - data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1; - data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF; - data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc; - data->nrg_th_cck = ranges->nrg_th_cck; - data->nrg_th_ofdm = ranges->nrg_th_ofdm; - data->barker_corr_th_min = ranges->barker_corr_th_min; - data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc; - data->nrg_th_cca = ranges->nrg_th_cca; - - data->last_bad_plcp_cnt_ofdm = 0; - data->last_fa_cnt_ofdm = 0; - data->last_bad_plcp_cnt_cck = 0; - data->last_fa_cnt_cck = 0; - - if (priv->fw->enhance_sensitivity_table) - ret |= iwl_enhance_sensitivity_write(priv); - else - ret |= iwl_sensitivity_write(priv); - IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret); -} - -void iwl_sensitivity_calibration(struct iwl_priv *priv) -{ - u32 rx_enable_time; - u32 fa_cck; - u32 fa_ofdm; - u32 bad_plcp_cck; - u32 bad_plcp_ofdm; - u32 norm_fa_ofdm; - u32 norm_fa_cck; - struct iwl_sensitivity_data *data = NULL; - struct statistics_rx_non_phy *rx_info; - struct statistics_rx_phy *ofdm, *cck; - struct statistics_general_data statis; - - if (priv->disable_sens_cal) - return; - - data = &(priv->sensitivity_data); - - if (!iwl_is_any_associated(priv)) { - IWL_DEBUG_CALIB(priv, "<< - not associated\n"); - return; - } - - spin_lock_bh(&priv->statistics.lock); - rx_info = &priv->statistics.rx_non_phy; - ofdm = &priv->statistics.rx_ofdm; - cck = &priv->statistics.rx_cck; - if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { - IWL_DEBUG_CALIB(priv, "<< invalid data.\n"); - spin_unlock_bh(&priv->statistics.lock); - return; - } - - /* Extract Statistics: */ - rx_enable_time = le32_to_cpu(rx_info->channel_load); - fa_cck = le32_to_cpu(cck->false_alarm_cnt); - fa_ofdm = le32_to_cpu(ofdm->false_alarm_cnt); - bad_plcp_cck = le32_to_cpu(cck->plcp_err); - bad_plcp_ofdm = le32_to_cpu(ofdm->plcp_err); - - statis.beacon_silence_rssi_a = - le32_to_cpu(rx_info->beacon_silence_rssi_a); - statis.beacon_silence_rssi_b = - le32_to_cpu(rx_info->beacon_silence_rssi_b); - statis.beacon_silence_rssi_c = - le32_to_cpu(rx_info->beacon_silence_rssi_c); - statis.beacon_energy_a = - le32_to_cpu(rx_info->beacon_energy_a); - statis.beacon_energy_b = - le32_to_cpu(rx_info->beacon_energy_b); - statis.beacon_energy_c = - le32_to_cpu(rx_info->beacon_energy_c); - - spin_unlock_bh(&priv->statistics.lock); - - IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time); - - if (!rx_enable_time) { - IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n"); - return; - } - - /* These statistics increase monotonically, and do not reset - * at each beacon. Calculate difference from last value, or just - * use the new statistics value if it has reset or wrapped around. */ - if (data->last_bad_plcp_cnt_cck > bad_plcp_cck) - data->last_bad_plcp_cnt_cck = bad_plcp_cck; - else { - bad_plcp_cck -= data->last_bad_plcp_cnt_cck; - data->last_bad_plcp_cnt_cck += bad_plcp_cck; - } - - if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm) - data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm; - else { - bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm; - data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm; - } - - if (data->last_fa_cnt_ofdm > fa_ofdm) - data->last_fa_cnt_ofdm = fa_ofdm; - else { - fa_ofdm -= data->last_fa_cnt_ofdm; - data->last_fa_cnt_ofdm += fa_ofdm; - } - - if (data->last_fa_cnt_cck > fa_cck) - data->last_fa_cnt_cck = fa_cck; - else { - fa_cck -= data->last_fa_cnt_cck; - data->last_fa_cnt_cck += fa_cck; - } - - /* Total aborted signal locks */ - norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm; - norm_fa_cck = fa_cck + bad_plcp_cck; - - IWL_DEBUG_CALIB(priv, "cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck, - bad_plcp_cck, fa_ofdm, bad_plcp_ofdm); - - iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time); - iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis); - if (priv->fw->enhance_sensitivity_table) - iwl_enhance_sensitivity_write(priv); - else - iwl_sensitivity_write(priv); -} - -static inline u8 find_first_chain(u8 mask) -{ - if (mask & ANT_A) - return CHAIN_A; - if (mask & ANT_B) - return CHAIN_B; - return CHAIN_C; -} - -/** - * Run disconnected antenna algorithm to find out which antennas are - * disconnected. - */ -static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, - struct iwl_chain_noise_data *data) -{ - u32 active_chains = 0; - u32 max_average_sig; - u16 max_average_sig_antenna_i; - u8 num_tx_chains; - u8 first_chain; - u16 i = 0; - - average_sig[0] = data->chain_signal_a / IWL_CAL_NUM_BEACONS; - average_sig[1] = data->chain_signal_b / IWL_CAL_NUM_BEACONS; - average_sig[2] = data->chain_signal_c / IWL_CAL_NUM_BEACONS; - - if (average_sig[0] >= average_sig[1]) { - max_average_sig = average_sig[0]; - max_average_sig_antenna_i = 0; - active_chains = (1 << max_average_sig_antenna_i); - } else { - max_average_sig = average_sig[1]; - max_average_sig_antenna_i = 1; - active_chains = (1 << max_average_sig_antenna_i); - } - - if (average_sig[2] >= max_average_sig) { - max_average_sig = average_sig[2]; - max_average_sig_antenna_i = 2; - active_chains = (1 << max_average_sig_antenna_i); - } - - IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n", - average_sig[0], average_sig[1], average_sig[2]); - IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n", - max_average_sig, max_average_sig_antenna_i); - - /* Compare signal strengths for all 3 receivers. */ - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (i != max_average_sig_antenna_i) { - s32 rssi_delta = (max_average_sig - average_sig[i]); - - /* If signal is very weak, compared with - * strongest, mark it as disconnected. */ - if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS) - data->disconn_array[i] = 1; - else - active_chains |= (1 << i); - IWL_DEBUG_CALIB(priv, "i = %d rssiDelta = %d " - "disconn_array[i] = %d\n", - i, rssi_delta, data->disconn_array[i]); - } - } - - /* - * The above algorithm sometimes fails when the ucode - * reports 0 for all chains. It's not clear why that - * happens to start with, but it is then causing trouble - * because this can make us enable more chains than the - * hardware really has. - * - * To be safe, simply mask out any chains that we know - * are not on the device. - */ - active_chains &= hw_params(priv).valid_rx_ant; - - num_tx_chains = 0; - for (i = 0; i < NUM_RX_CHAINS; i++) { - /* loops on all the bits of - * priv->hw_setting.valid_tx_ant */ - u8 ant_msk = (1 << i); - if (!(hw_params(priv).valid_tx_ant & ant_msk)) - continue; - - num_tx_chains++; - if (data->disconn_array[i] == 0) - /* there is a Tx antenna connected */ - break; - if (num_tx_chains == hw_params(priv).tx_chains_num && - data->disconn_array[i]) { - /* - * If all chains are disconnected - * connect the first valid tx chain - */ - first_chain = - find_first_chain(hw_params(priv).valid_tx_ant); - data->disconn_array[first_chain] = 0; - active_chains |= BIT(first_chain); - IWL_DEBUG_CALIB(priv, - "All Tx chains are disconnected W/A - declare %d as connected\n", - first_chain); - break; - } - } - - if (active_chains != hw_params(priv).valid_rx_ant && - active_chains != priv->chain_noise_data.active_chains) - IWL_DEBUG_CALIB(priv, - "Detected that not all antennas are connected! " - "Connected: %#x, valid: %#x.\n", - active_chains, - hw_params(priv).valid_rx_ant); - - /* Save for use within RXON, TX, SCAN commands, etc. */ - data->active_chains = active_chains; - IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n", - active_chains); -} - -static void iwlagn_gain_computation(struct iwl_priv *priv, - u32 average_noise[NUM_RX_CHAINS], - u8 default_chain) -{ - int i; - s32 delta_g; - struct iwl_chain_noise_data *data = &priv->chain_noise_data; - - /* - * Find Gain Code for the chains based on "default chain" - */ - for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) { - if ((data->disconn_array[i])) { - data->delta_gain_code[i] = 0; - continue; - } - - delta_g = (cfg(priv)->base_params->chain_noise_scale * - ((s32)average_noise[default_chain] - - (s32)average_noise[i])) / 1500; - - /* bound gain by 2 bits value max, 3rd bit is sign */ - data->delta_gain_code[i] = - min(abs(delta_g), - (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE); - - if (delta_g < 0) - /* - * set negative sign ... - * note to Intel developers: This is uCode API format, - * not the format of any internal device registers. - * Do not change this format for e.g. 6050 or similar - * devices. Change format only if more resolution - * (i.e. more than 2 bits magnitude) is needed. - */ - data->delta_gain_code[i] |= (1 << 2); - } - - IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d ANT_C = %d\n", - data->delta_gain_code[1], data->delta_gain_code[2]); - - if (!data->radio_write) { - struct iwl_calib_chain_noise_gain_cmd cmd; - - memset(&cmd, 0, sizeof(cmd)); - - iwl_set_calib_hdr(&cmd.hdr, - priv->phy_calib_chain_noise_gain_cmd); - cmd.delta_gain_1 = data->delta_gain_code[1]; - cmd.delta_gain_2 = data->delta_gain_code[2]; - iwl_dvm_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD, - CMD_ASYNC, sizeof(cmd), &cmd); - - data->radio_write = 1; - data->state = IWL_CHAIN_NOISE_CALIBRATED; - } -} - -/* - * Accumulate 16 beacons of signal and noise statistics for each of - * 3 receivers/antennas/rx-chains, then figure out: - * 1) Which antennas are connected. - * 2) Differential rx gain settings to balance the 3 receivers. - */ -void iwl_chain_noise_calibration(struct iwl_priv *priv) -{ - struct iwl_chain_noise_data *data = NULL; - - u32 chain_noise_a; - u32 chain_noise_b; - u32 chain_noise_c; - u32 chain_sig_a; - u32 chain_sig_b; - u32 chain_sig_c; - u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE}; - u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE; - u16 min_average_noise_antenna_i = INITIALIZATION_VALUE; - u16 i = 0; - u16 rxon_chnum = INITIALIZATION_VALUE; - u16 stat_chnum = INITIALIZATION_VALUE; - u8 rxon_band24; - u8 stat_band24; - struct statistics_rx_non_phy *rx_info; - - /* - * MULTI-FIXME: - * When we support multiple interfaces on different channels, - * this must be modified/fixed. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (priv->disable_chain_noise_cal) - return; - - data = &(priv->chain_noise_data); - - /* - * Accumulate just the first "chain_noise_num_beacons" after - * the first association, then we're done forever. - */ - if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) { - if (data->state == IWL_CHAIN_NOISE_ALIVE) - IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n"); - return; - } - - spin_lock_bh(&priv->statistics.lock); - - rx_info = &priv->statistics.rx_non_phy; - - if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) { - IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n"); - spin_unlock_bh(&priv->statistics.lock); - return; - } - - rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK); - rxon_chnum = le16_to_cpu(ctx->staging.channel); - stat_band24 = - !!(priv->statistics.flag & STATISTICS_REPLY_FLG_BAND_24G_MSK); - stat_chnum = le32_to_cpu(priv->statistics.flag) >> 16; - - /* Make sure we accumulate data for just the associated channel - * (even if scanning). */ - if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) { - IWL_DEBUG_CALIB(priv, "Stats not from chan=%d, band24=%d\n", - rxon_chnum, rxon_band24); - spin_unlock_bh(&priv->statistics.lock); - return; - } - - /* - * Accumulate beacon statistics values across - * "chain_noise_num_beacons" - */ - chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) & - IN_BAND_FILTER; - chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) & - IN_BAND_FILTER; - chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) & - IN_BAND_FILTER; - - chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER; - chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER; - chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER; - - spin_unlock_bh(&priv->statistics.lock); - - data->beacon_count++; - - data->chain_noise_a = (chain_noise_a + data->chain_noise_a); - data->chain_noise_b = (chain_noise_b + data->chain_noise_b); - data->chain_noise_c = (chain_noise_c + data->chain_noise_c); - - data->chain_signal_a = (chain_sig_a + data->chain_signal_a); - data->chain_signal_b = (chain_sig_b + data->chain_signal_b); - data->chain_signal_c = (chain_sig_c + data->chain_signal_c); - - IWL_DEBUG_CALIB(priv, "chan=%d, band24=%d, beacon=%d\n", - rxon_chnum, rxon_band24, data->beacon_count); - IWL_DEBUG_CALIB(priv, "chain_sig: a %d b %d c %d\n", - chain_sig_a, chain_sig_b, chain_sig_c); - IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n", - chain_noise_a, chain_noise_b, chain_noise_c); - - /* If this is the "chain_noise_num_beacons", determine: - * 1) Disconnected antennas (using signal strengths) - * 2) Differential gain (using silence noise) to balance receivers */ - if (data->beacon_count != IWL_CAL_NUM_BEACONS) - return; - - /* Analyze signal for disconnected antenna */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - /* Disable disconnected antenna algorithm for advanced - bt coex, assuming valid antennas are connected */ - data->active_chains = hw_params(priv).valid_rx_ant; - for (i = 0; i < NUM_RX_CHAINS; i++) - if (!(data->active_chains & (1<<i))) - data->disconn_array[i] = 1; - } else - iwl_find_disconn_antenna(priv, average_sig, data); - - /* Analyze noise for rx balance */ - average_noise[0] = data->chain_noise_a / IWL_CAL_NUM_BEACONS; - average_noise[1] = data->chain_noise_b / IWL_CAL_NUM_BEACONS; - average_noise[2] = data->chain_noise_c / IWL_CAL_NUM_BEACONS; - - for (i = 0; i < NUM_RX_CHAINS; i++) { - if (!(data->disconn_array[i]) && - (average_noise[i] <= min_average_noise)) { - /* This means that chain i is active and has - * lower noise values so far: */ - min_average_noise = average_noise[i]; - min_average_noise_antenna_i = i; - } - } - - IWL_DEBUG_CALIB(priv, "average_noise: a %d b %d c %d\n", - average_noise[0], average_noise[1], - average_noise[2]); - - IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n", - min_average_noise, min_average_noise_antenna_i); - - iwlagn_gain_computation(priv, average_noise, - find_first_chain(hw_params(priv).valid_rx_ant)); - - /* Some power changes may have been made during the calibration. - * Update and commit the RXON - */ - iwl_update_chain_flags(priv); - - data->state = IWL_CHAIN_NOISE_DONE; - iwl_power_update_mode(priv, false); -} - -void iwl_reset_run_time_calib(struct iwl_priv *priv) -{ - int i; - memset(&(priv->sensitivity_data), 0, - sizeof(struct iwl_sensitivity_data)); - memset(&(priv->chain_noise_data), 0, - sizeof(struct iwl_chain_noise_data)); - for (i = 0; i < NUM_RX_CHAINS; i++) - priv->chain_noise_data.delta_gain_code[i] = - CHAIN_NOISE_DELTA_GAIN_INIT_VAL; - - /* Ask for statistics now, the uCode will send notification - * periodically after association */ - iwl_send_statistics_request(priv, CMD_ASYNC, true); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-calib.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-calib.h deleted file mode 100644 index 9ed66833..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-calib.h +++ /dev/null @@ -1,75 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ -#ifndef __iwl_calib_h__ -#define __iwl_calib_h__ - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-commands.h" - -void iwl_chain_noise_calibration(struct iwl_priv *priv); -void iwl_sensitivity_calibration(struct iwl_priv *priv); - -void iwl_init_sensitivity(struct iwl_priv *priv); -void iwl_reset_run_time_calib(struct iwl_priv *priv); - -#endif /* __iwl_calib_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-hw.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-hw.h deleted file mode 100644 index d0ec0abd..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-hw.h +++ /dev/null @@ -1,111 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-agn-hw.h) only for hardware-related definitions. - */ - -#ifndef __iwl_agn_hw_h__ -#define __iwl_agn_hw_h__ - -#define IWLAGN_RTC_INST_LOWER_BOUND (0x000000) -#define IWLAGN_RTC_INST_UPPER_BOUND (0x020000) - -#define IWLAGN_RTC_DATA_LOWER_BOUND (0x800000) -#define IWLAGN_RTC_DATA_UPPER_BOUND (0x80C000) - -#define IWLAGN_RTC_INST_SIZE (IWLAGN_RTC_INST_UPPER_BOUND - \ - IWLAGN_RTC_INST_LOWER_BOUND) -#define IWLAGN_RTC_DATA_SIZE (IWLAGN_RTC_DATA_UPPER_BOUND - \ - IWLAGN_RTC_DATA_LOWER_BOUND) - -#define IWL60_RTC_INST_LOWER_BOUND (0x000000) -#define IWL60_RTC_INST_UPPER_BOUND (0x040000) -#define IWL60_RTC_DATA_LOWER_BOUND (0x800000) -#define IWL60_RTC_DATA_UPPER_BOUND (0x814000) -#define IWL60_RTC_INST_SIZE \ - (IWL60_RTC_INST_UPPER_BOUND - IWL60_RTC_INST_LOWER_BOUND) -#define IWL60_RTC_DATA_SIZE \ - (IWL60_RTC_DATA_UPPER_BOUND - IWL60_RTC_DATA_LOWER_BOUND) - -/* RSSI to dBm */ -#define IWLAGN_RSSI_OFFSET 44 - -#define IWLAGN_DEFAULT_TX_RETRY 15 -#define IWLAGN_MGMT_DFAULT_RETRY_LIMIT 3 -#define IWLAGN_RTS_DFAULT_RETRY_LIMIT 60 -#define IWLAGN_BAR_DFAULT_RETRY_LIMIT 60 -#define IWLAGN_LOW_RETRY_LIMIT 7 - -/* Limit range of txpower output target to be between these values */ -#define IWLAGN_TX_POWER_TARGET_POWER_MIN (0) /* 0 dBm: 1 milliwatt */ -#define IWLAGN_TX_POWER_TARGET_POWER_MAX (16) /* 16 dBm */ - -/* EEPROM */ -#define IWLAGN_EEPROM_IMG_SIZE 2048 - -#define IWLAGN_CMD_FIFO_NUM 7 -#define IWLAGN_NUM_QUEUES 20 -#define IWLAGN_NUM_AMPDU_QUEUES 9 -#define IWLAGN_FIRST_AMPDU_QUEUE 11 - -#endif /* __iwl_agn_hw_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-lib.c deleted file mode 100644 index 56f41c94..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-lib.c +++ /dev/null @@ -1,1329 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/etherdevice.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-hw.h" -#include "iwl-agn.h" -#include "iwl-trans.h" -#include "iwl-shared.h" - -int iwlagn_hw_valid_rtc_data_addr(u32 addr) -{ - return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) && - (addr < IWLAGN_RTC_DATA_UPPER_BOUND); -} - -int iwlagn_send_tx_power(struct iwl_priv *priv) -{ - struct iwlagn_tx_power_dbm_cmd tx_power_cmd; - u8 tx_ant_cfg_cmd; - - if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status), - "TX Power requested while scanning!\n")) - return -EAGAIN; - - /* half dBm need to multiply */ - tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); - - if (priv->tx_power_lmt_in_half_dbm && - priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) { - /* - * For the newer devices which using enhanced/extend tx power - * table in EEPROM, the format is in half dBm. driver need to - * convert to dBm format before report to mac80211. - * By doing so, there is a possibility of 1/2 dBm resolution - * lost. driver will perform "round-up" operation before - * reporting, but it will cause 1/2 dBm tx power over the - * regulatory limit. Perform the checking here, if the - * "tx_power_user_lmt" is higher than EEPROM value (in - * half-dBm format), lower the tx power based on EEPROM - */ - tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm; - } - tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED; - tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO; - - if (IWL_UCODE_API(priv->fw->ucode_ver) == 1) - tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1; - else - tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD; - - return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, CMD_SYNC, - sizeof(tx_power_cmd), &tx_power_cmd); -} - -void iwlagn_temperature(struct iwl_priv *priv) -{ - lockdep_assert_held(&priv->statistics.lock); - - /* store temperature from correct statistics (in Celsius) */ - priv->temperature = le32_to_cpu(priv->statistics.common.temperature); - iwl_tt_handler(priv); -} - -u16 iwl_eeprom_calib_version(struct iwl_shared *shrd) -{ - struct iwl_eeprom_calib_hdr *hdr; - - hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(shrd, - EEPROM_CALIB_ALL); - return hdr->version; - -} - -/* - * EEPROM - */ -static u32 eeprom_indirect_address(const struct iwl_shared *shrd, u32 address) -{ - u16 offset = 0; - - if ((address & INDIRECT_ADDRESS) == 0) - return address; - - switch (address & INDIRECT_TYPE_MSK) { - case INDIRECT_HOST: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_HOST); - break; - case INDIRECT_GENERAL: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_GENERAL); - break; - case INDIRECT_REGULATORY: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_REGULATORY); - break; - case INDIRECT_TXP_LIMIT: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_TXP_LIMIT); - break; - case INDIRECT_TXP_LIMIT_SIZE: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_TXP_LIMIT_SIZE); - break; - case INDIRECT_CALIBRATION: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_CALIBRATION); - break; - case INDIRECT_PROCESS_ADJST: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_PROCESS_ADJST); - break; - case INDIRECT_OTHERS: - offset = iwl_eeprom_query16(shrd, EEPROM_LINK_OTHERS); - break; - default: - IWL_ERR(shrd->trans, "illegal indirect type: 0x%X\n", - address & INDIRECT_TYPE_MSK); - break; - } - - /* translate the offset from words to byte */ - return (address & ADDRESS_MSK) + (offset << 1); -} - -const u8 *iwl_eeprom_query_addr(const struct iwl_shared *shrd, size_t offset) -{ - u32 address = eeprom_indirect_address(shrd, offset); - BUG_ON(address >= shrd->cfg->base_params->eeprom_size); - return &shrd->eeprom[address]; -} - -struct iwl_mod_params iwlagn_mod_params = { - .amsdu_size_8K = 1, - .restart_fw = 1, - .plcp_check = true, - .bt_coex_active = true, - .no_sleep_autoadjust = true, - .power_level = IWL_POWER_INDEX_1, - .bt_ch_announce = true, - .wanted_ucode_alternative = 1, - .auto_agg = true, - /* the rest are 0 by default */ -}; - -int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) -{ - int idx = 0; - int band_offset = 0; - - /* HT rate format: mac80211 wants an MCS number, which is just LSB */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = (rate_n_flags & 0xff); - return idx; - /* Legacy rate format, search for match in table */ - } else { - if (band == IEEE80211_BAND_5GHZ) - band_offset = IWL_FIRST_OFDM_RATE; - for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) - if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) - return idx - band_offset; - } - - return -1; -} - -int iwlagn_manage_ibss_station(struct iwl_priv *priv, - struct ieee80211_vif *vif, bool add) -{ - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - - if (add) - return iwlagn_add_bssid_station(priv, vif_priv->ctx, - vif->bss_conf.bssid, - &vif_priv->ibss_bssid_sta_id); - return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id, - vif->bss_conf.bssid); -} - -/** - * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode - * - * pre-requirements: - * 1. acquire mutex before calling - * 2. make sure rf is on and not in exit state - */ -int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control) -{ - struct iwl_txfifo_flush_cmd flush_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_TXFIFO_FLUSH, - .len = { sizeof(struct iwl_txfifo_flush_cmd), }, - .flags = CMD_SYNC, - .data = { &flush_cmd, }, - }; - - might_sleep(); - - memset(&flush_cmd, 0, sizeof(flush_cmd)); - if (flush_control & BIT(IWL_RXON_CTX_BSS)) - flush_cmd.fifo_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK | - IWL_SCD_BE_MSK | IWL_SCD_BK_MSK | - IWL_SCD_MGMT_MSK; - if ((flush_control & BIT(IWL_RXON_CTX_PAN)) && - (priv->shrd->valid_contexts != BIT(IWL_RXON_CTX_BSS))) - flush_cmd.fifo_control |= IWL_PAN_SCD_VO_MSK | - IWL_PAN_SCD_VI_MSK | IWL_PAN_SCD_BE_MSK | - IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK | - IWL_PAN_SCD_MULTICAST_MSK; - - if (hw_params(priv).sku & EEPROM_SKU_CAP_11N_ENABLE) - flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK; - - IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n", - flush_cmd.fifo_control); - flush_cmd.flush_control = cpu_to_le16(flush_control); - - return iwl_dvm_send_cmd(priv, &cmd); -} - -void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control) -{ - mutex_lock(&priv->mutex); - ieee80211_stop_queues(priv->hw); - if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) { - IWL_ERR(priv, "flush request fail\n"); - goto done; - } - IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n"); - iwl_trans_wait_tx_queue_empty(trans(priv)); -done: - ieee80211_wake_queues(priv->hw); - mutex_unlock(&priv->mutex); -} - -/* - * BT coex - */ -/* - * Macros to access the lookup table. - * - * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req, -* wifi_prio, wifi_txrx and wifi_sh_ant_req. - * - * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH - * - * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits - * one after another in 32-bit registers, and "registers" 0 through 7 contain - * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order). - * - * These macros encode that format. - */ -#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \ - wifi_txrx, wifi_sh_ant_req) \ - (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \ - (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6)) - -#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \ - lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f))) -#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \ - bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)))) -#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \ - bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)) -#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req) \ - LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \ - bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)) - -#define LUT_WLAN_KILL_OP(lut, op, val) \ - lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e))) -#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)))) -#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) -#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) - -#define LUT_ANT_SWITCH_OP(lut, op, val) \ - lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1))) -#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, \ - wifi_sh_ant_req)))) -#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) -#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ - wifi_prio, wifi_txrx, wifi_sh_ant_req) \ - LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ - wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) - -static const __le32 iwlagn_def_3w_lookup[12] = { - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaeaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xcc00ff28), - cpu_to_le32(0x0000aaaa), - cpu_to_le32(0xcc00aaaa), - cpu_to_le32(0x0000aaaa), - cpu_to_le32(0xc0004000), - cpu_to_le32(0x00004000), - cpu_to_le32(0xf0005000), - cpu_to_le32(0xf0005000), -}; - -static const __le32 iwlagn_concurrent_lookup[12] = { - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0xaaaaaaaa), - cpu_to_le32(0x00000000), - cpu_to_le32(0x00000000), - cpu_to_le32(0x00000000), - cpu_to_le32(0x00000000), -}; - -void iwlagn_send_advance_bt_config(struct iwl_priv *priv) -{ - struct iwl_basic_bt_cmd basic = { - .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT, - .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT, - .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT, - .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT, - }; - struct iwl6000_bt_cmd bt_cmd_6000; - struct iwl2000_bt_cmd bt_cmd_2000; - int ret; - - BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) != - sizeof(basic.bt3_lookup_table)); - - if (cfg(priv)->bt_params) { - if (cfg(priv)->bt_params->bt_session_2) { - bt_cmd_2000.prio_boost = cpu_to_le32( - cfg(priv)->bt_params->bt_prio_boost); - bt_cmd_2000.tx_prio_boost = 0; - bt_cmd_2000.rx_prio_boost = 0; - } else { - bt_cmd_6000.prio_boost = - cfg(priv)->bt_params->bt_prio_boost; - bt_cmd_6000.tx_prio_boost = 0; - bt_cmd_6000.rx_prio_boost = 0; - } - } else { - IWL_ERR(priv, "failed to construct BT Coex Config\n"); - return; - } - - basic.kill_ack_mask = priv->kill_ack_mask; - basic.kill_cts_mask = priv->kill_cts_mask; - basic.valid = priv->bt_valid; - - /* - * Configure BT coex mode to "no coexistence" when the - * user disabled BT coexistence, we have no interface - * (might be in monitor mode), or the interface is in - * IBSS mode (no proper uCode support for coex then). - */ - if (!iwlagn_mod_params.bt_coex_active || - priv->iw_mode == NL80211_IFTYPE_ADHOC) { - basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED; - } else { - basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W << - IWLAGN_BT_FLAG_COEX_MODE_SHIFT; - - if (!priv->bt_enable_pspoll) - basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; - else - basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE; - - if (priv->bt_ch_announce) - basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION; - IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags); - } - priv->bt_enable_flag = basic.flags; - if (priv->bt_full_concurrent) - memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup, - sizeof(iwlagn_concurrent_lookup)); - else - memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup, - sizeof(iwlagn_def_3w_lookup)); - - IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n", - basic.flags ? "active" : "disabled", - priv->bt_full_concurrent ? - "full concurrency" : "3-wire"); - - if (cfg(priv)->bt_params->bt_session_2) { - memcpy(&bt_cmd_2000.basic, &basic, - sizeof(basic)); - ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, - CMD_SYNC, sizeof(bt_cmd_2000), &bt_cmd_2000); - } else { - memcpy(&bt_cmd_6000.basic, &basic, - sizeof(basic)); - ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, - CMD_SYNC, sizeof(bt_cmd_6000), &bt_cmd_6000); - } - if (ret) - IWL_ERR(priv, "failed to send BT Coex Config\n"); - -} - -void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena) -{ - struct iwl_rxon_context *ctx, *found_ctx = NULL; - bool found_ap = false; - - lockdep_assert_held(&priv->mutex); - - /* Check whether AP or GO mode is active. */ - if (rssi_ena) { - for_each_context(priv, ctx) { - if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP && - iwl_is_associated_ctx(ctx)) { - found_ap = true; - break; - } - } - } - - /* - * If disable was received or If GO/AP mode, disable RSSI - * measurements. - */ - if (!rssi_ena || found_ap) { - if (priv->cur_rssi_ctx) { - ctx = priv->cur_rssi_ctx; - ieee80211_disable_rssi_reports(ctx->vif); - priv->cur_rssi_ctx = NULL; - } - return; - } - - /* - * If rssi measurements need to be enabled, consider all cases now. - * Figure out how many contexts are active. - */ - for_each_context(priv, ctx) { - if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION && - iwl_is_associated_ctx(ctx)) { - found_ctx = ctx; - break; - } - } - - /* - * rssi monitor already enabled for the correct interface...nothing - * to do. - */ - if (found_ctx == priv->cur_rssi_ctx) - return; - - /* - * Figure out if rssi monitor is currently enabled, and needs - * to be changed. If rssi monitor is already enabled, disable - * it first else just enable rssi measurements on the - * interface found above. - */ - if (priv->cur_rssi_ctx) { - ctx = priv->cur_rssi_ctx; - if (ctx->vif) - ieee80211_disable_rssi_reports(ctx->vif); - } - - priv->cur_rssi_ctx = found_ctx; - - if (!found_ctx) - return; - - ieee80211_enable_rssi_reports(found_ctx->vif, - IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD, - IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD); -} - -static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg) -{ - return BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3 >> - BT_UART_MSG_FRAME3SCOESCO_POS; -} - -static void iwlagn_bt_traffic_change_work(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_traffic_change_work); - struct iwl_rxon_context *ctx; - int smps_request = -1; - - if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { - /* bt coex disabled */ - return; - } - - /* - * Note: bt_traffic_load can be overridden by scan complete and - * coex profile notifications. Ignore that since only bad consequence - * can be not matching debug print with actual state. - */ - IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n", - priv->bt_traffic_load); - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - if (priv->bt_status) - smps_request = IEEE80211_SMPS_DYNAMIC; - else - smps_request = IEEE80211_SMPS_AUTOMATIC; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - smps_request = IEEE80211_SMPS_DYNAMIC; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - smps_request = IEEE80211_SMPS_STATIC; - break; - default: - IWL_ERR(priv, "Invalid BT traffic load: %d\n", - priv->bt_traffic_load); - break; - } - - mutex_lock(&priv->mutex); - - /* - * We can not send command to firmware while scanning. When the scan - * complete we will schedule this work again. We do check with mutex - * locked to prevent new scan request to arrive. We do not check - * STATUS_SCANNING to avoid race when queue_work two times from - * different notifications, but quit and not perform any work at all. - */ - if (test_bit(STATUS_SCAN_HW, &priv->status)) - goto out; - - iwl_update_chain_flags(priv); - - if (smps_request != -1) { - priv->current_ht_config.smps = smps_request; - for_each_context(priv, ctx) { - if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) - ieee80211_request_smps(ctx->vif, smps_request); - } - } - - /* - * Dynamic PS poll related functionality. Adjust RSSI measurements if - * necessary. - */ - iwlagn_bt_coex_rssi_monitor(priv); -out: - mutex_unlock(&priv->mutex); -} - -/* - * If BT sco traffic, and RSSI monitor is enabled, move measurements to the - * correct interface or disable it if this is the last interface to be - * removed. - */ -void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv) -{ - if (priv->bt_is_sco && - priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS) - iwlagn_bt_adjust_rssi_monitor(priv, true); - else - iwlagn_bt_adjust_rssi_monitor(priv, false); -} - -static void iwlagn_print_uartmsg(struct iwl_priv *priv, - struct iwl_bt_uart_msg *uart_msg) -{ - IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, " - "Update Req = 0x%X", - (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >> - BT_UART_MSG_FRAME1MSGTYPE_POS, - (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >> - BT_UART_MSG_FRAME1SSN_POS, - (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >> - BT_UART_MSG_FRAME1UPDATEREQ_POS); - - IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, " - "Chl_SeqN = 0x%X, In band = 0x%X", - (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2OPENCONNECTIONS_POS, - (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2TRAFFICLOAD_POS, - (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2CHLSEQN_POS, - (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >> - BT_UART_MSG_FRAME2INBAND_POS); - - IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, " - "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X", - (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3SCOESCO_POS, - (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3SNIFF_POS, - (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3A2DP_POS, - (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3ACL_POS, - (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3MASTER_POS, - (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >> - BT_UART_MSG_FRAME3OBEX_POS); - - IWL_DEBUG_COEX(priv, "Idle duration = 0x%X", - (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >> - BT_UART_MSG_FRAME4IDLEDURATION_POS); - - IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, " - "eSCO Retransmissions = 0x%X", - (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >> - BT_UART_MSG_FRAME5TXACTIVITY_POS, - (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >> - BT_UART_MSG_FRAME5RXACTIVITY_POS, - (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >> - BT_UART_MSG_FRAME5ESCORETRANSMIT_POS); - - IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X", - (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >> - BT_UART_MSG_FRAME6SNIFFINTERVAL_POS, - (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >> - BT_UART_MSG_FRAME6DISCOVERABLE_POS); - - IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = " - "0x%X, Inquiry = 0x%X, Connectable = 0x%X", - (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7SNIFFACTIVITY_POS, - (BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7PAGE_POS, - (BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7INQUIRY_POS, - (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >> - BT_UART_MSG_FRAME7CONNECTABLE_POS); -} - -static void iwlagn_set_kill_msk(struct iwl_priv *priv, - struct iwl_bt_uart_msg *uart_msg) -{ - u8 kill_msk; - static const __le32 bt_kill_ack_msg[2] = { - IWLAGN_BT_KILL_ACK_MASK_DEFAULT, - IWLAGN_BT_KILL_ACK_CTS_MASK_SCO }; - static const __le32 bt_kill_cts_msg[2] = { - IWLAGN_BT_KILL_CTS_MASK_DEFAULT, - IWLAGN_BT_KILL_ACK_CTS_MASK_SCO }; - - kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) - ? 1 : 0; - if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] || - priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) { - priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK; - priv->kill_ack_mask = bt_kill_ack_msg[kill_msk]; - priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK; - priv->kill_cts_mask = bt_kill_cts_msg[kill_msk]; - - /* schedule to send runtime bt_config */ - queue_work(priv->workqueue, &priv->bt_runtime_config); - } -} - -int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data; - struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg; - - if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) { - /* bt coex disabled */ - return 0; - } - - IWL_DEBUG_COEX(priv, "BT Coex notification:\n"); - IWL_DEBUG_COEX(priv, " status: %d\n", coex->bt_status); - IWL_DEBUG_COEX(priv, " traffic load: %d\n", coex->bt_traffic_load); - IWL_DEBUG_COEX(priv, " CI compliance: %d\n", - coex->bt_ci_compliance); - iwlagn_print_uartmsg(priv, uart_msg); - - priv->last_bt_traffic_load = priv->bt_traffic_load; - priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg); - - if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { - if (priv->bt_status != coex->bt_status || - priv->last_bt_traffic_load != coex->bt_traffic_load) { - if (coex->bt_status) { - /* BT on */ - if (!priv->bt_ch_announce) - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_HIGH; - else - priv->bt_traffic_load = - coex->bt_traffic_load; - } else { - /* BT off */ - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_NONE; - } - priv->bt_status = coex->bt_status; - queue_work(priv->workqueue, - &priv->bt_traffic_change_work); - } - } - - iwlagn_set_kill_msk(priv, uart_msg); - - /* FIXME: based on notification, adjust the prio_boost */ - - priv->bt_ci_compliance = coex->bt_ci_compliance; - return 0; -} - -void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv) -{ - priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] = - iwlagn_bt_coex_profile_notif; -} - -void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv) -{ - INIT_WORK(&priv->bt_traffic_change_work, - iwlagn_bt_traffic_change_work); -} - -void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv) -{ - cancel_work_sync(&priv->bt_traffic_change_work); -} - -static bool is_single_rx_stream(struct iwl_priv *priv) -{ - return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || - priv->current_ht_config.single_chain_sufficient; -} - -#define IWL_NUM_RX_CHAINS_MULTIPLE 3 -#define IWL_NUM_RX_CHAINS_SINGLE 2 -#define IWL_NUM_IDLE_CHAINS_DUAL 2 -#define IWL_NUM_IDLE_CHAINS_SINGLE 1 - -/* - * Determine how many receiver/antenna chains to use. - * - * More provides better reception via diversity. Fewer saves power - * at the expense of throughput, but only when not in powersave to - * start with. - * - * MIMO (dual stream) requires at least 2, but works better with 3. - * This does not determine *which* chains to use, just how many. - */ -static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) -{ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist && - (priv->bt_full_concurrent || - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { - /* - * only use chain 'A' in bt high traffic load or - * full concurrency mode - */ - return IWL_NUM_RX_CHAINS_SINGLE; - } - /* # of Rx chains to use when expecting MIMO. */ - if (is_single_rx_stream(priv)) - return IWL_NUM_RX_CHAINS_SINGLE; - else - return IWL_NUM_RX_CHAINS_MULTIPLE; -} - -/* - * When we are in power saving mode, unless device support spatial - * multiplexing power save, use the active count for rx chain count. - */ -static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) -{ - /* # Rx chains when idling, depending on SMPS mode */ - switch (priv->current_ht_config.smps) { - case IEEE80211_SMPS_STATIC: - case IEEE80211_SMPS_DYNAMIC: - return IWL_NUM_IDLE_CHAINS_SINGLE; - case IEEE80211_SMPS_AUTOMATIC: - case IEEE80211_SMPS_OFF: - return active_cnt; - default: - WARN(1, "invalid SMPS mode %d", - priv->current_ht_config.smps); - return active_cnt; - } -} - -/* up to 4 chains */ -static u8 iwl_count_chain_bitmap(u32 chain_bitmap) -{ - u8 res; - res = (chain_bitmap & BIT(0)) >> 0; - res += (chain_bitmap & BIT(1)) >> 1; - res += (chain_bitmap & BIT(2)) >> 2; - res += (chain_bitmap & BIT(3)) >> 3; - return res; -} - -/** - * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image - * - * Selects how many and which Rx receivers/antennas/chains to use. - * This should not be used for scan command ... it puts data in wrong place. - */ -void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - bool is_single = is_single_rx_stream(priv); - bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->shrd->status); - u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; - u32 active_chains; - u16 rx_chain; - - /* Tell uCode which antennas are actually connected. - * Before first association, we assume all antennas are connected. - * Just after first association, iwl_chain_noise_calibration() - * checks which antennas actually *are* connected. */ - if (priv->chain_noise_data.active_chains) - active_chains = priv->chain_noise_data.active_chains; - else - active_chains = hw_params(priv).valid_rx_ant; - - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist && - (priv->bt_full_concurrent || - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { - /* - * only use chain 'A' in bt high traffic load or - * full concurrency mode - */ - active_chains = first_antenna(active_chains); - } - - rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; - - /* How many receivers should we use? */ - active_rx_cnt = iwl_get_active_rx_chain_count(priv); - idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); - - - /* correct rx chain count according hw settings - * and chain noise calibration - */ - valid_rx_cnt = iwl_count_chain_bitmap(active_chains); - if (valid_rx_cnt < active_rx_cnt) - active_rx_cnt = valid_rx_cnt; - - if (valid_rx_cnt < idle_rx_cnt) - idle_rx_cnt = valid_rx_cnt; - - rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; - rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; - - ctx->staging.rx_chain = cpu_to_le16(rx_chain); - - if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) - ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; - else - ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - - IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", - ctx->staging.rx_chain, - active_rx_cnt, idle_rx_cnt); - - WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || - active_rx_cnt < idle_rx_cnt); -} - -u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) -{ - int i; - u8 ind = ant; - - if (priv->band == IEEE80211_BAND_2GHZ && - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) - return 0; - - for (i = 0; i < RATE_ANT_NUM - 1; i++) { - ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; - if (valid & BIT(ind)) - return ind; - } - return ant; -} - -#ifdef CONFIG_PM_SLEEP -static void iwlagn_convert_p1k(u16 *p1k, __le16 *out) -{ - int i; - - for (i = 0; i < IWLAGN_P1K_SIZE; i++) - out[i] = cpu_to_le16(p1k[i]); -} - -struct wowlan_key_data { - struct iwl_rxon_context *ctx; - struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc; - struct iwlagn_wowlan_tkip_params_cmd *tkip; - const u8 *bssid; - bool error, use_rsc_tsc, use_tkip; -}; - - -static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key, - void *_data) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct wowlan_key_data *data = _data; - struct iwl_rxon_context *ctx = data->ctx; - struct aes_sc *aes_sc, *aes_tx_sc = NULL; - struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL; - struct iwlagn_p1k_cache *rx_p1ks; - u8 *rx_mic_key; - struct ieee80211_key_seq seq; - u32 cur_rx_iv32 = 0; - u16 p1k[IWLAGN_P1K_SIZE]; - int ret, i; - - mutex_lock(&priv->mutex); - - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && - !sta && !ctx->key_mapping_keys) - ret = iwl_set_default_wep_key(priv, ctx, key); - else - ret = iwl_set_dynamic_key(priv, ctx, key, sta); - - if (ret) { - IWL_ERR(priv, "Error setting key during suspend!\n"); - data->error = true; - } - - switch (key->cipher) { - case WLAN_CIPHER_SUITE_TKIP: - if (sta) { - tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc; - tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc; - - rx_p1ks = data->tkip->rx_uni; - - ieee80211_get_key_tx_seq(key, &seq); - tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16); - tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32); - - ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k); - iwlagn_convert_p1k(p1k, data->tkip->tx.p1k); - - memcpy(data->tkip->mic_keys.tx, - &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY], - IWLAGN_MIC_KEY_SIZE); - - rx_mic_key = data->tkip->mic_keys.rx_unicast; - } else { - tkip_sc = - data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc; - rx_p1ks = data->tkip->rx_multi; - rx_mic_key = data->tkip->mic_keys.rx_mcast; - } - - /* - * For non-QoS this relies on the fact that both the uCode and - * mac80211 use TID 0 (as they need to to avoid replay attacks) - * for checking the IV in the frames. - */ - for (i = 0; i < IWLAGN_NUM_RSC; i++) { - ieee80211_get_key_rx_seq(key, i, &seq); - tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16); - tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32); - /* wrapping isn't allowed, AP must rekey */ - if (seq.tkip.iv32 > cur_rx_iv32) - cur_rx_iv32 = seq.tkip.iv32; - } - - ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k); - iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k); - ieee80211_get_tkip_rx_p1k(key, data->bssid, - cur_rx_iv32 + 1, p1k); - iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k); - - memcpy(rx_mic_key, - &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY], - IWLAGN_MIC_KEY_SIZE); - - data->use_tkip = true; - data->use_rsc_tsc = true; - break; - case WLAN_CIPHER_SUITE_CCMP: - if (sta) { - u8 *pn = seq.ccmp.pn; - - aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc; - aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc; - - ieee80211_get_key_tx_seq(key, &seq); - aes_tx_sc->pn = cpu_to_le64( - (u64)pn[5] | - ((u64)pn[4] << 8) | - ((u64)pn[3] << 16) | - ((u64)pn[2] << 24) | - ((u64)pn[1] << 32) | - ((u64)pn[0] << 40)); - } else - aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc; - - /* - * For non-QoS this relies on the fact that both the uCode and - * mac80211 use TID 0 for checking the IV in the frames. - */ - for (i = 0; i < IWLAGN_NUM_RSC; i++) { - u8 *pn = seq.ccmp.pn; - - ieee80211_get_key_rx_seq(key, i, &seq); - aes_sc->pn = cpu_to_le64( - (u64)pn[5] | - ((u64)pn[4] << 8) | - ((u64)pn[3] << 16) | - ((u64)pn[2] << 24) | - ((u64)pn[1] << 32) | - ((u64)pn[0] << 40)); - } - data->use_rsc_tsc = true; - break; - } - - mutex_unlock(&priv->mutex); -} - -int iwlagn_send_patterns(struct iwl_priv *priv, - struct cfg80211_wowlan *wowlan) -{ - struct iwlagn_wowlan_patterns_cmd *pattern_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_WOWLAN_PATTERNS, - .dataflags[0] = IWL_HCMD_DFL_NOCOPY, - .flags = CMD_SYNC, - }; - int i, err; - - if (!wowlan->n_patterns) - return 0; - - cmd.len[0] = sizeof(*pattern_cmd) + - wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern); - - pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL); - if (!pattern_cmd) - return -ENOMEM; - - pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns); - - for (i = 0; i < wowlan->n_patterns; i++) { - int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); - - memcpy(&pattern_cmd->patterns[i].mask, - wowlan->patterns[i].mask, mask_len); - memcpy(&pattern_cmd->patterns[i].pattern, - wowlan->patterns[i].pattern, - wowlan->patterns[i].pattern_len); - pattern_cmd->patterns[i].mask_size = mask_len; - pattern_cmd->patterns[i].pattern_size = - wowlan->patterns[i].pattern_len; - } - - cmd.data[0] = pattern_cmd; - err = iwl_dvm_send_cmd(priv, &cmd); - kfree(pattern_cmd); - return err; -} - -int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan) -{ - struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd; - struct iwl_rxon_cmd rxon; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd; - struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {}; - struct iwlagn_d3_config_cmd d3_cfg_cmd = {}; - struct wowlan_key_data key_data = { - .ctx = ctx, - .bssid = ctx->active.bssid_addr, - .use_rsc_tsc = false, - .tkip = &tkip_cmd, - .use_tkip = false, - }; - int ret, i; - u16 seq; - - key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL); - if (!key_data.rsc_tsc) - return -ENOMEM; - - memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd)); - - /* - * We know the last used seqno, and the uCode expects to know that - * one, it will increment before TX. - */ - seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ; - wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq); - - /* - * For QoS counters, we store the one to use next, so subtract 0x10 - * since the uCode will add 0x10 before using the value. - */ - for (i = 0; i < IWL_MAX_TID_COUNT; i++) { - seq = priv->tid_data[IWL_AP_ID][i].seq_number; - seq -= 0x10; - wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq); - } - - if (wowlan->disconnect) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS | - IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE); - if (wowlan->magic_pkt) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET); - if (wowlan->gtk_rekey_failure) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL); - if (wowlan->eap_identity_req) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ); - if (wowlan->four_way_handshake) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE); - if (wowlan->n_patterns) - wakeup_filter_cmd.enabled |= - cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH); - - if (wowlan->rfkill_release) - d3_cfg_cmd.wakeup_flags |= - cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL); - - iwl_scan_cancel_timeout(priv, 200); - - memcpy(&rxon, &ctx->active, sizeof(rxon)); - - priv->ucode_loaded = false; - iwl_trans_stop_device(trans(priv)); - - priv->wowlan = true; - - ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN); - if (ret) - goto out; - - /* now configure WoWLAN ucode */ - ret = iwl_alive_start(priv); - if (ret) - goto out; - - memcpy(&ctx->staging, &rxon, sizeof(rxon)); - ret = iwlagn_commit_rxon(priv, ctx); - if (ret) - goto out; - - ret = iwl_power_update_mode(priv, true); - if (ret) - goto out; - - if (!iwlagn_mod_params.sw_crypto) { - /* mark all keys clear */ - priv->ucode_key_table = 0; - ctx->key_mapping_keys = 0; - - /* - * This needs to be unlocked due to lock ordering - * constraints. Since we're in the suspend path - * that isn't really a problem though. - */ - mutex_unlock(&priv->mutex); - ieee80211_iter_keys(priv->hw, ctx->vif, - iwlagn_wowlan_program_keys, - &key_data); - mutex_lock(&priv->mutex); - if (key_data.error) { - ret = -EIO; - goto out; - } - - if (key_data.use_rsc_tsc) { - struct iwl_host_cmd rsc_tsc_cmd = { - .id = REPLY_WOWLAN_TSC_RSC_PARAMS, - .flags = CMD_SYNC, - .data[0] = key_data.rsc_tsc, - .dataflags[0] = IWL_HCMD_DFL_NOCOPY, - .len[0] = sizeof(*key_data.rsc_tsc), - }; - - ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd); - if (ret) - goto out; - } - - if (key_data.use_tkip) { - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_WOWLAN_TKIP_PARAMS, - CMD_SYNC, sizeof(tkip_cmd), - &tkip_cmd); - if (ret) - goto out; - } - - if (priv->have_rekey_data) { - memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd)); - memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN); - kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN); - memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN); - kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN); - kek_kck_cmd.replay_ctr = priv->replay_ctr; - - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_WOWLAN_KEK_KCK_MATERIAL, - CMD_SYNC, sizeof(kek_kck_cmd), - &kek_kck_cmd); - if (ret) - goto out; - } - } - - ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, CMD_SYNC, - sizeof(d3_cfg_cmd), &d3_cfg_cmd); - if (ret) - goto out; - - ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER, - CMD_SYNC, sizeof(wakeup_filter_cmd), - &wakeup_filter_cmd); - if (ret) - goto out; - - ret = iwlagn_send_patterns(priv, wowlan); - out: - kfree(key_data.rsc_tsc); - return ret; -} -#endif - -int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) -{ - if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) { - IWL_WARN(priv, "Not sending command - %s KILL\n", - iwl_is_rfkill(priv) ? "RF" : "CT"); - return -EIO; - } - - /* - * Synchronous commands from this op-mode must hold - * the mutex, this ensures we don't try to send two - * (or more) synchronous commands at a time. - */ - if (cmd->flags & CMD_SYNC) - lockdep_assert_held(&priv->mutex); - - if (priv->ucode_owner == IWL_OWNERSHIP_TM && - !(cmd->flags & CMD_ON_DEMAND)) { - IWL_DEBUG_HC(priv, "tm own the uCode, no regular hcmd send\n"); - return -EIO; - } - - return iwl_trans_send_cmd(trans(priv), cmd); -} - -int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id, - u32 flags, u16 len, const void *data) -{ - struct iwl_host_cmd cmd = { - .id = id, - .len = { len, }, - .data = { data, }, - .flags = flags, - }; - - return iwl_dvm_send_cmd(priv, &cmd); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rs.c deleted file mode 100644 index da2be3e0..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ /dev/null @@ -1,3361 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <net/mac80211.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> - -#include <linux/workqueue.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-agn.h" -#include "iwl-op-mode.h" - -#define RS_NAME "iwl-agn-rs" - -#define NUM_TRY_BEFORE_ANT_TOGGLE 1 -#define IWL_NUMBER_TRY 1 -#define IWL_HT_NUMBER_TRY 3 - -#define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ -#define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ -#define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ - -/* max allowed rate miss before sync LQ cmd */ -#define IWL_MISSED_RATE_MAX 15 -/* max time to accum history 2 seconds */ -#define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ) - -static u8 rs_ht_to_legacy[] = { - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX -}; - -static const u8 ant_toggle_lookup[] = { - /*ANT_NONE -> */ ANT_NONE, - /*ANT_A -> */ ANT_B, - /*ANT_B -> */ ANT_C, - /*ANT_AB -> */ ANT_BC, - /*ANT_C -> */ ANT_A, - /*ANT_AC -> */ ANT_AB, - /*ANT_BC -> */ ANT_AC, - /*ANT_ABC -> */ ANT_ABC, -}; - -#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \ - [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ - IWL_RATE_SISO_##s##M_PLCP, \ - IWL_RATE_MIMO2_##s##M_PLCP,\ - IWL_RATE_MIMO3_##s##M_PLCP,\ - IWL_RATE_##r##M_IEEE, \ - IWL_RATE_##ip##M_INDEX, \ - IWL_RATE_##in##M_INDEX, \ - IWL_RATE_##rp##M_INDEX, \ - IWL_RATE_##rn##M_INDEX, \ - IWL_RATE_##pp##M_INDEX, \ - IWL_RATE_##np##M_INDEX } - -/* - * Parameter order: - * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate - * - * If there isn't a valid next or previous rate then INV is used which - * maps to IWL_RATE_INVALID - * - */ -const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { - IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */ - IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */ - IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */ - IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */ - IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */ - IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */ - IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */ - IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */ - IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */ - IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */ - IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */ - IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ - IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ - /* FIXME:RS: ^^ should be INV (legacy) */ -}; - -static inline u8 rs_extract_rate(u32 rate_n_flags) -{ - return (u8)(rate_n_flags & RATE_MCS_RATE_MSK); -} - -static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) -{ - int idx = 0; - - /* HT rate format */ - if (rate_n_flags & RATE_MCS_HT_MSK) { - idx = rs_extract_rate(rate_n_flags); - - if (idx >= IWL_RATE_MIMO3_6M_PLCP) - idx = idx - IWL_RATE_MIMO3_6M_PLCP; - else if (idx >= IWL_RATE_MIMO2_6M_PLCP) - idx = idx - IWL_RATE_MIMO2_6M_PLCP; - - idx += IWL_FIRST_OFDM_RATE; - /* skip 9M not supported in ht*/ - if (idx >= IWL_RATE_9M_INDEX) - idx += 1; - if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) - return idx; - - /* legacy rate format, search for match in table */ - } else { - for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) - if (iwl_rates[idx].plcp == - rs_extract_rate(rate_n_flags)) - return idx; - } - - return -1; -} - -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct sk_buff *skb, - struct ieee80211_sta *sta, - struct iwl_lq_sta *lq_sta); -static void rs_fill_link_cmd(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, u32 rate_n_flags); -static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); - - -#ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index); -#else -static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{} -#endif - -/** - * The following tables contain the expected throughput metrics for all rates - * - * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits - * - * where invalid entries are zeros. - * - * CCK rates are only valid in legacy table and will only be used in G - * (2.4 GHz) band. - */ - -static s32 expected_tpt_legacy[IWL_RATE_COUNT] = { - 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0 -}; - -static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202}, /* Norm */ - {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210}, /* SGI */ - {0, 0, 0, 0, 47, 0, 91, 133, 171, 242, 305, 334, 362}, /* AGG */ - {0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */ -}; - -static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */ - {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */ - {0, 0, 0, 0, 94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */ - {0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */ - {0, 0, 0, 0, 81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */ - {0, 0, 0, 0, 89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */ - {0, 0, 0, 0, 97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/ -}; - -static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */ - {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */ - {0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */ - {0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */ - {0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */ - {0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */ - {0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */ -}; - -static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = { - {0, 0, 0, 0, 152, 0, 211, 239, 255, 279, 290, 294, 297}, /* Norm */ - {0, 0, 0, 0, 160, 0, 219, 245, 261, 284, 294, 297, 300}, /* SGI */ - {0, 0, 0, 0, 254, 0, 443, 584, 695, 868, 984, 1030, 1070}, /* AGG */ - {0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */ -}; - -/* mbps, mcs */ -static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { - { "1", "BPSK DSSS"}, - { "2", "QPSK DSSS"}, - {"5.5", "BPSK CCK"}, - { "11", "QPSK CCK"}, - { "6", "BPSK 1/2"}, - { "9", "BPSK 1/2"}, - { "12", "QPSK 1/2"}, - { "18", "QPSK 3/4"}, - { "24", "16QAM 1/2"}, - { "36", "16QAM 3/4"}, - { "48", "64QAM 2/3"}, - { "54", "64QAM 3/4"}, - { "60", "64QAM 5/6"}, -}; - -#define MCS_INDEX_PER_STREAM (8) - -static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) -{ - window->data = 0; - window->success_counter = 0; - window->success_ratio = IWL_INVALID_VALUE; - window->counter = 0; - window->average_tpt = IWL_INVALID_VALUE; - window->stamp = 0; -} - -static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) -{ - return (ant_type & valid_antenna) == ant_type; -} - -/* - * removes the old data from the statistics. All data that is older than - * TID_MAX_TIME_DIFF, will be deleted. - */ -static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) -{ - /* The oldest age we want to keep */ - u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; - - while (tl->queue_count && - (tl->time_stamp < oldest_time)) { - tl->total -= tl->packet_count[tl->head]; - tl->packet_count[tl->head] = 0; - tl->time_stamp += TID_QUEUE_CELL_SPACING; - tl->queue_count--; - tl->head++; - if (tl->head >= TID_QUEUE_MAX_SIZE) - tl->head = 0; - } -} - -/* - * increment traffic load value for tid and also remove - * any old values if passed the certain time period - */ -static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, - struct ieee80211_hdr *hdr) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl_traffic_load *tl = NULL; - u8 tid; - - if (ieee80211_is_data_qos(hdr->frame_control)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & 0xf; - } else - return IWL_MAX_TID_COUNT; - - if (unlikely(tid >= IWL_MAX_TID_COUNT)) - return IWL_MAX_TID_COUNT; - - tl = &lq_data->load[tid]; - - curr_time -= curr_time % TID_ROUND_VALUE; - - /* Happens only for the first packet. Initialize the data */ - if (!(tl->queue_count)) { - tl->total = 1; - tl->time_stamp = curr_time; - tl->queue_count = 1; - tl->head = 0; - tl->packet_count[0] = 1; - return IWL_MAX_TID_COUNT; - } - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - index = (tl->head + index) % TID_QUEUE_MAX_SIZE; - tl->packet_count[index] = tl->packet_count[index] + 1; - tl->total = tl->total + 1; - - if ((index + 1) > tl->queue_count) - tl->queue_count = index + 1; - - return tid; -} - -#ifdef CONFIG_MAC80211_DEBUGFS -/** - * Program the device to use fixed rate for frame transmit - * This is for debugging/testing only - * once the device start use fixed rate, we need to reload the module - * to being back the normal operation. - */ -static void rs_program_fix_rate(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta) -{ - struct iwl_station_priv *sta_priv = - container_of(lq_sta, struct iwl_station_priv, lq_sta); - struct iwl_rxon_context *ctx = sta_priv->ctx; - - lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ - lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - lq_sta->active_mimo3_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ - -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE - /* testmode has higher priority to overwirte the fixed rate */ - if (priv->tm_fixed_rate) - lq_sta->dbg_fixed_rate = priv->tm_fixed_rate; -#endif - - IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n", - lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); - - if (lq_sta->dbg_fixed_rate) { - rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate); - iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC, - false); - } -} -#endif - -/* - get the traffic load value for tid -*/ -static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) -{ - u32 curr_time = jiffies_to_msecs(jiffies); - u32 time_diff; - s32 index; - struct iwl_traffic_load *tl = NULL; - - if (tid >= IWL_MAX_TID_COUNT) - return 0; - - tl = &(lq_data->load[tid]); - - curr_time -= curr_time % TID_ROUND_VALUE; - - if (!(tl->queue_count)) - return 0; - - time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time); - index = time_diff / TID_QUEUE_CELL_SPACING; - - /* The history is too long: remove data that is older than */ - /* TID_MAX_TIME_DIFF */ - if (index >= TID_QUEUE_MAX_SIZE) - rs_tl_rm_old_stats(tl, curr_time); - - return tl->total; -} - -static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, - struct iwl_lq_sta *lq_data, u8 tid, - struct ieee80211_sta *sta) -{ - int ret = -EAGAIN; - u32 load; - - /* - * Don't create TX aggregation sessions when in high - * BT traffic, as they would just be disrupted by BT. - */ - if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) { - IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n", - priv->bt_traffic_load); - return ret; - } - - load = rs_tl_get_load(lq_data, tid); - - if ((iwlagn_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) { - IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n", - sta->addr, tid); - ret = ieee80211_start_tx_ba_session(sta, tid, 5000); - if (ret == -EAGAIN) { - /* - * driver and mac80211 is out of sync - * this might be cause by reloading firmware - * stop the tx ba session here - */ - IWL_ERR(priv, "Fail start Tx agg on tid: %d\n", - tid); - ieee80211_stop_tx_ba_session(sta, tid); - } - } else { - IWL_DEBUG_HT(priv, "Aggregation not enabled for tid %d " - "because load = %u\n", tid, load); - } - return ret; -} - -static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, - struct iwl_lq_sta *lq_data, - struct ieee80211_sta *sta) -{ - if (tid < IWL_MAX_TID_COUNT) - rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); - else - IWL_ERR(priv, "tid exceeds max TID count: %d/%d\n", - tid, IWL_MAX_TID_COUNT); -} - -static inline int get_num_of_ant_from_rate(u32 rate_n_flags) -{ - return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_C_MSK); -} - -/* - * Static function to get the expected throughput from an iwl_scale_tbl_info - * that wraps a NULL pointer check - */ -static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) -{ - if (tbl->expected_tpt) - return tbl->expected_tpt[rs_index]; - return 0; -} - -/** - * rs_collect_tx_data - Update the success/failure sliding window - * - * We keep a sliding window of the last 62 packets transmitted - * at this rate. window->data contains the bitmask of successful - * packets. - */ -static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl, - int scale_index, int attempts, int successes) -{ - struct iwl_rate_scale_data *window = NULL; - static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); - s32 fail_count, tpt; - - if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) - return -EINVAL; - - /* Select window for current tx bit rate */ - window = &(tbl->win[scale_index]); - - /* Get expected throughput */ - tpt = get_expected_tpt(tbl, scale_index); - - /* - * Keep track of only the latest 62 tx frame attempts in this rate's - * history window; anything older isn't really relevant any more. - * If we have filled up the sliding window, drop the oldest attempt; - * if the oldest attempt (highest bit in bitmap) shows "success", - * subtract "1" from the success counter (this is the main reason - * we keep these bitmaps!). - */ - while (attempts > 0) { - if (window->counter >= IWL_RATE_MAX_WINDOW) { - - /* remove earliest */ - window->counter = IWL_RATE_MAX_WINDOW - 1; - - if (window->data & mask) { - window->data &= ~mask; - window->success_counter--; - } - } - - /* Increment frames-attempted counter */ - window->counter++; - - /* Shift bitmap by one frame to throw away oldest history */ - window->data <<= 1; - - /* Mark the most recent #successes attempts as successful */ - if (successes > 0) { - window->success_counter++; - window->data |= 0x1; - successes--; - } - - attempts--; - } - - /* Calculate current success ratio, avoid divide-by-0! */ - if (window->counter > 0) - window->success_ratio = 128 * (100 * window->success_counter) - / window->counter; - else - window->success_ratio = IWL_INVALID_VALUE; - - fail_count = window->counter - window->success_counter; - - /* Calculate average throughput, if we have enough history. */ - if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || - (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) - window->average_tpt = (window->success_ratio * tpt + 64) / 128; - else - window->average_tpt = IWL_INVALID_VALUE; - - /* Tag this window as having been updated */ - window->stamp = jiffies; - - return 0; -} - -/* - * Fill uCode API rate_n_flags field, based on "search" or "active" table. - */ -/* FIXME:RS:remove this function and put the flags statically in the table */ -static u32 rate_n_flags_from_tbl(struct iwl_priv *priv, - struct iwl_scale_tbl_info *tbl, - int index, u8 use_green) -{ - u32 rate_n_flags = 0; - - if (is_legacy(tbl->lq_type)) { - rate_n_flags = iwl_rates[index].plcp; - if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) - rate_n_flags |= RATE_MCS_CCK_MSK; - - } else if (is_Ht(tbl->lq_type)) { - if (index > IWL_LAST_OFDM_RATE) { - IWL_ERR(priv, "Invalid HT rate index %d\n", index); - index = IWL_LAST_OFDM_RATE; - } - rate_n_flags = RATE_MCS_HT_MSK; - - if (is_siso(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_siso; - else if (is_mimo2(tbl->lq_type)) - rate_n_flags |= iwl_rates[index].plcp_mimo2; - else - rate_n_flags |= iwl_rates[index].plcp_mimo3; - } else { - IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type); - } - - rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & - RATE_MCS_ANT_ABC_MSK); - - if (is_Ht(tbl->lq_type)) { - if (tbl->is_ht40) { - if (tbl->is_dup) - rate_n_flags |= RATE_MCS_DUP_MSK; - else - rate_n_flags |= RATE_MCS_HT40_MSK; - } - if (tbl->is_SGI) - rate_n_flags |= RATE_MCS_SGI_MSK; - - if (use_green) { - rate_n_flags |= RATE_MCS_GF_MSK; - if (is_siso(tbl->lq_type) && tbl->is_SGI) { - rate_n_flags &= ~RATE_MCS_SGI_MSK; - IWL_ERR(priv, "GF was set with SGI:SISO\n"); - } - } - } - return rate_n_flags; -} - -/* - * Interpret uCode API's rate_n_flags format, - * fill "search" or "active" tx mode table. - */ -static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, - enum ieee80211_band band, - struct iwl_scale_tbl_info *tbl, - int *rate_idx) -{ - u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); - u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); - u8 mcs; - - memset(tbl, 0, sizeof(struct iwl_scale_tbl_info)); - *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); - - if (*rate_idx == IWL_RATE_INVALID) { - *rate_idx = -1; - return -EINVAL; - } - tbl->is_SGI = 0; /* default legacy setup */ - tbl->is_ht40 = 0; - tbl->is_dup = 0; - tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); - tbl->lq_type = LQ_NONE; - tbl->max_search = IWL_MAX_SEARCH; - - /* legacy rate format */ - if (!(rate_n_flags & RATE_MCS_HT_MSK)) { - if (num_of_ant == 1) { - if (band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - } - /* HT rate format */ - } else { - if (rate_n_flags & RATE_MCS_SGI_MSK) - tbl->is_SGI = 1; - - if ((rate_n_flags & RATE_MCS_HT40_MSK) || - (rate_n_flags & RATE_MCS_DUP_MSK)) - tbl->is_ht40 = 1; - - if (rate_n_flags & RATE_MCS_DUP_MSK) - tbl->is_dup = 1; - - mcs = rs_extract_rate(rate_n_flags); - - /* SISO */ - if (mcs <= IWL_RATE_SISO_60M_PLCP) { - if (num_of_ant == 1) - tbl->lq_type = LQ_SISO; /*else NONE*/ - /* MIMO2 */ - } else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) { - if (num_of_ant == 2) - tbl->lq_type = LQ_MIMO2; - /* MIMO3 */ - } else { - if (num_of_ant == 3) { - tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; - tbl->lq_type = LQ_MIMO3; - } - } - } - return 0; -} - -/* switch to another antenna/antennas and return 1 */ -/* if no other valid antenna found, return 0 */ -static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, - struct iwl_scale_tbl_info *tbl) -{ - u8 new_ant_type; - - if (!tbl->ant_type || tbl->ant_type > ANT_ABC) - return 0; - - if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) - return 0; - - new_ant_type = ant_toggle_lookup[tbl->ant_type]; - - while ((new_ant_type != tbl->ant_type) && - !rs_is_valid_ant(valid_ant, new_ant_type)) - new_ant_type = ant_toggle_lookup[new_ant_type]; - - if (new_ant_type == tbl->ant_type) - return 0; - - tbl->ant_type = new_ant_type; - *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; - *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; - return 1; -} - -/** - * Green-field mode is valid if the station supports it and - * there are no non-GF stations present in the BSS. - */ -static bool rs_use_green(struct ieee80211_sta *sta) -{ - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) && - !(ctx->ht.non_gf_sta_present); -} - -/** - * rs_get_supported_rates - get the available rates - * - * if management frame or broadcast frame only return - * basic available rates. - * - */ -static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, - struct ieee80211_hdr *hdr, - enum iwl_table_type rate_type) -{ - if (is_legacy(rate_type)) { - return lq_sta->active_legacy_rate; - } else { - if (is_siso(rate_type)) - return lq_sta->active_siso_rate; - else if (is_mimo2(rate_type)) - return lq_sta->active_mimo2_rate; - else - return lq_sta->active_mimo3_rate; - } -} - -static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, - int rate_type) -{ - u8 high = IWL_RATE_INVALID; - u8 low = IWL_RATE_INVALID; - - /* 802.11A or ht walks to the next literal adjacent rate in - * the rate table */ - if (is_a_band(rate_type) || !is_legacy(rate_type)) { - int i; - u32 mask; - - /* Find the previous rate that is in the rate mask */ - i = index - 1; - for (mask = (1 << i); i >= 0; i--, mask >>= 1) { - if (rate_mask & mask) { - low = i; - break; - } - } - - /* Find the next rate that is in the rate mask */ - i = index + 1; - for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { - if (rate_mask & mask) { - high = i; - break; - } - } - - return (high << 8) | low; - } - - low = index; - while (low != IWL_RATE_INVALID) { - low = iwl_rates[low].prev_rs; - if (low == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << low)) - break; - IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low); - } - - high = index; - while (high != IWL_RATE_INVALID) { - high = iwl_rates[high].next_rs; - if (high == IWL_RATE_INVALID) - break; - if (rate_mask & (1 << high)) - break; - IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high); - } - - return (high << 8) | low; -} - -static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, - u8 scale_index, u8 ht_possible) -{ - s32 low; - u16 rate_mask; - u16 high_low; - u8 switch_to_legacy = 0; - u8 is_green = lq_sta->is_green; - struct iwl_priv *priv = lq_sta->drv; - - /* check if we need to switch from HT to legacy rates. - * assumption is that mandatory rates (1Mbps or 6Mbps) - * are always supported (spec demand) */ - if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { - switch_to_legacy = 1; - scale_index = rs_ht_to_legacy[scale_index]; - if (lq_sta->band == IEEE80211_BAND_5GHZ) - tbl->lq_type = LQ_A; - else - tbl->lq_type = LQ_G; - - if (num_of_ant(tbl->ant_type) > 1) - tbl->ant_type = - first_antenna(hw_params(priv).valid_tx_ant); - - tbl->is_ht40 = 0; - tbl->is_SGI = 0; - tbl->max_search = IWL_MAX_SEARCH; - } - - rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); - - /* Mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - /* supp_rates has no CCK bits in A mode */ - if (lq_sta->band == IEEE80211_BAND_5GHZ) - rate_mask = (u16)(rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_mask = (u16)(rate_mask & lq_sta->supp_rates); - } - - /* If we switched from HT to legacy, check current rate */ - if (switch_to_legacy && (rate_mask & (1 << scale_index))) { - low = scale_index; - goto out; - } - - high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, - tbl->lq_type); - low = high_low & 0xff; - - if (low == IWL_RATE_INVALID) - low = scale_index; - -out: - return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green); -} - -/* - * Simple function to compare two rate scale table types - */ -static bool table_type_matches(struct iwl_scale_tbl_info *a, - struct iwl_scale_tbl_info *b) -{ - return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) && - (a->is_SGI == b->is_SGI); -} - -static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct iwl_lq_sta *lq_sta) -{ - struct iwl_scale_tbl_info *tbl; - bool full_concurrent = priv->bt_full_concurrent; - - if (priv->bt_ant_couple_ok) { - /* - * Is there a need to switch between - * full concurrency and 3-wire? - */ - if (priv->bt_ci_compliance && priv->bt_ant_couple_ok) - full_concurrent = true; - else - full_concurrent = false; - } - if ((priv->bt_traffic_load != priv->last_bt_traffic_load) || - (priv->bt_full_concurrent != full_concurrent)) { - priv->bt_full_concurrent = full_concurrent; - priv->last_bt_traffic_load = priv->bt_traffic_load; - - /* Update uCode's rate table. */ - tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - - queue_work(priv->workqueue, &priv->bt_full_concurrency); - } -} - -/* - * mac80211 sends us Tx status - */ -static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta, - struct sk_buff *skb) -{ - int legacy_success; - int retries; - int rs_index, mac_index, i; - struct iwl_lq_sta *lq_sta = priv_sta; - struct iwl_link_quality_cmd *table; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct iwl_op_mode *op_mode = (struct iwl_op_mode *)priv_r; - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - enum mac80211_rate_control_flags mac_flags; - u32 tx_rate; - struct iwl_scale_tbl_info tbl_type; - struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n"); - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (!lq_sta) { - IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n"); - return; - } else if (!lq_sta->drv) { - IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); - return; - } - - if (!ieee80211_is_data(hdr->frame_control) || - info->flags & IEEE80211_TX_CTL_NO_ACK) - return; - - /* This packet was aggregated but doesn't carry status info */ - if ((info->flags & IEEE80211_TX_CTL_AMPDU) && - !(info->flags & IEEE80211_TX_STAT_AMPDU)) - return; - - /* - * Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - table = &lq_sta->lq; - tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); - if (priv->band == IEEE80211_BAND_5GHZ) - rs_index -= IWL_FIRST_OFDM_RATE; - mac_flags = info->status.rates[0].flags; - mac_index = info->status.rates[0].idx; - /* For HT packets, map MCS to PLCP */ - if (mac_flags & IEEE80211_TX_RC_MCS) { - mac_index &= RATE_MCS_CODE_MSK; /* Remove # of streams */ - if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) - mac_index++; - /* - * mac80211 HT index is always zero-indexed; we need to move - * HT OFDM rates after CCK rates in 2.4 GHz band - */ - if (priv->band == IEEE80211_BAND_2GHZ) - mac_index += IWL_FIRST_OFDM_RATE; - } - /* Here we actually compare this rate to the latest LQ command */ - if ((mac_index < 0) || - (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) || - (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) || - (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) || - (tbl_type.ant_type != info->antenna_sel_tx) || - (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) || - (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) || - (rs_index != mac_index)) { - IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate); - /* - * Since rates mis-match, the last LQ command may have failed. - * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with - * ... driver. - */ - lq_sta->missed_rate_counter++; - if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) { - lq_sta->missed_rate_counter = 0; - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - } - /* Regardless, ignore this status info for outdated rate */ - return; - } else - /* Rate did match, so reset the missed_rate_counter */ - lq_sta->missed_rate_counter = 0; - - /* Figure out if rate scale algorithm is in active or search table */ - if (table_type_matches(&tbl_type, - &(lq_sta->lq_info[lq_sta->active_tbl]))) { - curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - } else if (table_type_matches(&tbl_type, - &lq_sta->lq_info[1 - lq_sta->active_tbl])) { - curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - } else { - IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n"); - tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n", - tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); - tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n", - tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); - IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n", - tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI); - /* - * no matching table found, let's by-pass the data collection - * and continue to perform rate scale to find the rate table - */ - rs_stay_in_table(lq_sta, true); - goto done; - } - - /* - * Updating the frame history depends on whether packets were - * aggregated. - * - * For aggregation, all packets were transmitted at the same rate, the - * first index into rate scale table. - */ - if (info->flags & IEEE80211_TX_STAT_AMPDU) { - tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, - &rs_index); - rs_collect_tx_data(curr_tbl, rs_index, - info->status.ampdu_len, - info->status.ampdu_ack_len); - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->stay_in_tbl) { - lq_sta->total_success += info->status.ampdu_ack_len; - lq_sta->total_failed += (info->status.ampdu_len - - info->status.ampdu_ack_len); - } - } else { - /* - * For legacy, update frame history with for each Tx retry. - */ - retries = info->status.rates[0].count - 1; - /* HW doesn't send more than 15 retries */ - retries = min(retries, 15); - - /* The last transmission may have been successful */ - legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); - /* Collect data for each rate used during failed TX attempts */ - for (i = 0; i <= retries; ++i) { - tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags); - rs_get_tbl_info_from_mcs(tx_rate, priv->band, - &tbl_type, &rs_index); - /* - * Only collect stats if retried rate is in the same RS - * table as active/search. - */ - if (table_type_matches(&tbl_type, curr_tbl)) - tmp_tbl = curr_tbl; - else if (table_type_matches(&tbl_type, other_tbl)) - tmp_tbl = other_tbl; - else - continue; - rs_collect_tx_data(tmp_tbl, rs_index, 1, - i < retries ? 0 : legacy_success); - } - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->stay_in_tbl) { - lq_sta->total_success += legacy_success; - lq_sta->total_failed += retries + (1 - legacy_success); - } - } - /* The last TX rate is cached in lq_sta; it's set in if/else above */ - lq_sta->last_rate_n_flags = tx_rate; -done: - /* See if there's a better rate or modulation mode to try. */ - if (sta && sta->supp_rates[sband->band]) - rs_rate_scale_perform(priv, skb, sta, lq_sta); - -#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_TESTMODE) - if ((priv->tm_fixed_rate) && - (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate)) - rs_program_fix_rate(priv, lq_sta); -#endif - if (cfg(priv)->bt_params && cfg(priv)->bt_params->advanced_bt_coexist) - rs_bt_update_lq(priv, ctx, lq_sta); -} - -/* - * Begin a period of staying with a selected modulation mode. - * Set "stay_in_tbl" flag to prevent any mode switches. - * Set frame tx success limits according to legacy vs. high-throughput, - * and reset overall (spanning all rates) tx success history statistics. - * These control how long we stay using same modulation mode before - * searching for a new mode. - */ -static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, - struct iwl_lq_sta *lq_sta) -{ - IWL_DEBUG_RATE(priv, "we are staying in the same table\n"); - lq_sta->stay_in_tbl = 1; /* only place this gets set */ - if (is_legacy) { - lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; - } else { - lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; - lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; - lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; - } - lq_sta->table_count = 0; - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = jiffies; - lq_sta->action_counter = 0; -} - -/* - * Find correct throughput table for given mode of modulation - */ -static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl) -{ - /* Used to choose among HT tables */ - s32 (*ht_tbl_pointer)[IWL_RATE_COUNT]; - - /* Check for invalid LQ type */ - if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) { - tbl->expected_tpt = expected_tpt_legacy; - return; - } - - /* Legacy rates have only one table */ - if (is_legacy(tbl->lq_type)) { - tbl->expected_tpt = expected_tpt_legacy; - return; - } - - /* Choose among many HT tables depending on number of streams - * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation - * status */ - if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) - ht_tbl_pointer = expected_tpt_siso20MHz; - else if (is_siso(tbl->lq_type)) - ht_tbl_pointer = expected_tpt_siso40MHz; - else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) - ht_tbl_pointer = expected_tpt_mimo2_20MHz; - else if (is_mimo2(tbl->lq_type)) - ht_tbl_pointer = expected_tpt_mimo2_40MHz; - else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup)) - ht_tbl_pointer = expected_tpt_mimo3_20MHz; - else /* if (is_mimo3(tbl->lq_type)) <-- must be true */ - ht_tbl_pointer = expected_tpt_mimo3_40MHz; - - if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ - tbl->expected_tpt = ht_tbl_pointer[0]; - else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */ - tbl->expected_tpt = ht_tbl_pointer[1]; - else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */ - tbl->expected_tpt = ht_tbl_pointer[2]; - else /* AGG+SGI */ - tbl->expected_tpt = ht_tbl_pointer[3]; -} - -/* - * Find starting rate for new "search" high-throughput mode of modulation. - * Goal is to find lowest expected rate (under perfect conditions) that is - * above the current measured throughput of "active" mode, to give new mode - * a fair chance to prove itself without too many challenges. - * - * This gets called when transitioning to more aggressive modulation - * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive - * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need - * to decrease to match "active" throughput. When moving from MIMO to SISO, - * bit rate will typically need to increase, but not if performance was bad. - */ -static s32 rs_get_best_rate(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, /* "search" */ - u16 rate_mask, s8 index) -{ - /* "active" values */ - struct iwl_scale_tbl_info *active_tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - s32 active_sr = active_tbl->win[index].success_ratio; - s32 active_tpt = active_tbl->expected_tpt[index]; - - /* expected "search" throughput */ - s32 *tpt_tbl = tbl->expected_tpt; - - s32 new_rate, high, low, start_hi; - u16 high_low; - s8 rate = index; - - new_rate = high = low = start_hi = IWL_RATE_INVALID; - - for (; ;) { - high_low = rs_get_adjacent_rate(priv, rate, rate_mask, - tbl->lq_type); - - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* - * Lower the "search" bit rate, to give new "search" mode - * approximately the same throughput as "active" if: - * - * 1) "Active" mode has been working modestly well (but not - * great), and expected "search" throughput (under perfect - * conditions) at candidate rate is above the actual - * measured "active" throughput (but less than expected - * "active" throughput under perfect conditions). - * OR - * 2) "Active" mode has been working perfectly or very well - * and expected "search" throughput (under perfect - * conditions) at candidate rate is above expected - * "active" throughput (under perfect conditions). - */ - if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && - ((active_sr > IWL_RATE_DECREASE_TH) && - (active_sr <= IWL_RATE_HIGH_TH) && - (tpt_tbl[rate] <= active_tpt))) || - ((active_sr >= IWL_RATE_SCALE_SWITCH) && - (tpt_tbl[rate] > active_tpt))) { - - /* (2nd or later pass) - * If we've already tried to raise the rate, and are - * now trying to lower it, use the higher rate. */ - if (start_hi != IWL_RATE_INVALID) { - new_rate = start_hi; - break; - } - - new_rate = rate; - - /* Loop again with lower rate */ - if (low != IWL_RATE_INVALID) - rate = low; - - /* Lower rate not available, use the original */ - else - break; - - /* Else try to raise the "search" rate to match "active" */ - } else { - /* (2nd or later pass) - * If we've already tried to lower the rate, and are - * now trying to raise it, use the lower rate. */ - if (new_rate != IWL_RATE_INVALID) - break; - - /* Loop again with higher rate */ - else if (high != IWL_RATE_INVALID) { - start_hi = high; - rate = high; - - /* Higher rate not available, use the original */ - } else { - new_rate = rate; - break; - } - } - } - - return new_rate; -} - -/* - * Set up search table for MIMO2 - */ -static int rs_switch_to_mimo2(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) - return -1; - - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (hw_params(priv).tx_chains_num < 2) - return -1; - - IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n"); - - tbl->lq_type = LQ_MIMO2; - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - tbl->max_search = IWL_MAX_SEARCH; - rate_mask = lq_sta->active_mimo2_rate; - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); - - IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Set up search table for MIMO3 - */ -static int rs_switch_to_mimo3(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - s32 rate; - s8 is_green = lq_sta->is_green; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) - return -1; - - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) - return -1; - - /* Need both Tx chains/antennas to support MIMO */ - if (hw_params(priv).tx_chains_num < 3) - return -1; - - IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n"); - - tbl->lq_type = LQ_MIMO3; - tbl->is_dup = lq_sta->is_dup; - tbl->action = 0; - tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; - rate_mask = lq_sta->active_mimo3_rate; - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - rs_set_expected_tpt_table(lq_sta, tbl); - - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n", - rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); - - IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Set up search table for SISO - */ -static int rs_switch_to_siso(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - struct iwl_scale_tbl_info *tbl, int index) -{ - u16 rate_mask; - u8 is_green = lq_sta->is_green; - s32 rate; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) - return -1; - - IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n"); - - tbl->is_dup = lq_sta->is_dup; - tbl->lq_type = LQ_SISO; - tbl->action = 0; - tbl->max_search = IWL_MAX_SEARCH; - rate_mask = lq_sta->active_siso_rate; - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - tbl->is_ht40 = 1; - else - tbl->is_ht40 = 0; - - if (is_green) - tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/ - - rs_set_expected_tpt_table(lq_sta, tbl); - rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index); - - IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask); - if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { - IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n", - rate, rate_mask); - return -1; - } - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green); - IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n", - tbl->current_rate, is_green); - return 0; -} - -/* - * Try to switch to new modulation mode from legacy - */ -static int rs_move_legacy_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, - int index) -{ - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = hw_params(priv).valid_tx_ant; - u8 tx_chains_num = hw_params(priv).tx_chains_num; - int ret = 0; - u8 update_search_tbl_counter = 0; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2) - tbl->action = IWL_LEGACY_SWITCH_SISO; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - valid_tx_ant = - first_antenna(hw_params(priv).valid_tx_ant); - if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 && - tbl->action != IWL_LEGACY_SWITCH_SISO) - tbl->action = IWL_LEGACY_SWITCH_SISO; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if (!iwl_ht_enabled(priv)) - /* stay in Legacy */ - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && - tbl->action > IWL_LEGACY_SWITCH_SISO) - tbl->action = IWL_LEGACY_SWITCH_SISO; - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent) { - if (!iwl_ht_enabled(priv)) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) - tbl->action = IWL_LEGACY_SWITCH_SISO; - valid_tx_ant = - first_antenna(hw_params(priv).valid_tx_ant); - } - - start_action = tbl->action; - for (; ;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_LEGACY_SWITCH_ANTENNA1: - case IWL_LEGACY_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n"); - - if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 && - tx_chains_num <= 1) || - (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 && - tx_chains_num <= 2)) - break; - - /* Don't change antenna if success has been great */ - if (window->success_ratio >= IWL_RS_GOOD_RATIO && - !priv->bt_full_concurrent && - priv->bt_traffic_load == - IWL_BT_COEX_TRAFFIC_LOAD_NONE) - break; - - /* Set up search table to try other antenna */ - memcpy(search_tbl, tbl, sz); - - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - update_search_tbl_counter = 1; - rs_set_expected_tpt_table(lq_sta, search_tbl); - goto out; - } - break; - case IWL_LEGACY_SWITCH_SISO: - IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n"); - - /* Set up search table to try SISO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - - break; - case IWL_LEGACY_SWITCH_MIMO2_AB: - case IWL_LEGACY_SWITCH_MIMO2_AC: - case IWL_LEGACY_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n"); - - /* Set up search table to try MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - break; - - case IWL_LEGACY_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n"); - - /* Set up search table to try MIMO3 */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) { - lq_sta->action_counter = 0; - goto out; - } - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - - } - search_tbl->lq_type = LQ_NONE; - return 0; - -out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) - tbl->action = IWL_LEGACY_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - return 0; - -} - -/* - * Try to switch to new modulation mode from SISO - */ -static int rs_move_siso_to_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, int index) -{ - u8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = hw_params(priv).valid_tx_ant; - u8 tx_chains_num = hw_params(priv).tx_chains_num; - u8 update_search_tbl_counter = 0; - int ret; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_SISO_SWITCH_ANTENNA2) - tbl->action = IWL_SISO_SWITCH_MIMO2_AB; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - valid_tx_ant = - first_antenna(hw_params(priv).valid_tx_ant); - if (tbl->action != IWL_SISO_SWITCH_ANTENNA1) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE && - tbl->action > IWL_SISO_SWITCH_ANTENNA2) { - /* stay in SISO */ - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - } - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent) { - valid_tx_ant = - first_antenna(hw_params(priv).valid_tx_ant); - if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - } - - start_action = tbl->action; - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_SISO_SWITCH_ANTENNA1: - case IWL_SISO_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n"); - if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 && - tx_chains_num <= 1) || - (tbl->action == IWL_SISO_SWITCH_ANTENNA2 && - tx_chains_num <= 2)) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO && - !priv->bt_full_concurrent && - priv->bt_traffic_load == - IWL_BT_COEX_TRAFFIC_LOAD_NONE) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - update_search_tbl_counter = 1; - goto out; - } - break; - case IWL_SISO_SWITCH_MIMO2_AB: - case IWL_SISO_SWITCH_MIMO2_AC: - case IWL_SISO_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - - if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - break; - case IWL_SISO_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n"); - - memcpy(search_tbl, tbl, sz); - if (is_green) { - if (!tbl->is_SGI) - break; - else - IWL_ERR(priv, - "SGI was set in GF+SISO\n"); - } - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(priv, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - case IWL_SISO_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - break; - } - tbl->action++; - if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC) - tbl->action = IWL_SISO_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; -} - -/* - * Try to switch to new modulation mode from MIMO2 - */ -static int rs_move_mimo2_to_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = hw_params(priv).valid_tx_ant; - u8 tx_chains_num = hw_params(priv).tx_chains_num; - u8 update_search_tbl_counter = 0; - int ret; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - if (tbl->action != IWL_MIMO2_SWITCH_SISO_A) - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_MIMO2_SWITCH_SISO_B || - tbl->action == IWL_MIMO2_SWITCH_SISO_C) - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && - (tbl->action < IWL_MIMO2_SWITCH_SISO_A || - tbl->action > IWL_MIMO2_SWITCH_SISO_C)) { - /* switch in SISO */ - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - } - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent && - (tbl->action < IWL_MIMO2_SWITCH_SISO_A || - tbl->action > IWL_MIMO2_SWITCH_SISO_C)) - tbl->action = IWL_MIMO2_SWITCH_SISO_A; - - start_action = tbl->action; - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO2_SWITCH_ANTENNA1: - case IWL_MIMO2_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n"); - - if (tx_chains_num <= 2) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) { - update_search_tbl_counter = 1; - goto out; - } - break; - case IWL_MIMO2_SWITCH_SISO_A: - case IWL_MIMO2_SWITCH_SISO_B: - case IWL_MIMO2_SWITCH_SISO_C: - IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) - search_tbl->ant_type = ANT_A; - else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) - search_tbl->ant_type = ANT_B; - else - search_tbl->ant_type = ANT_C; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO2_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n"); - - /* Set up new search table for MIMO2 */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(priv, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - - case IWL_MIMO2_SWITCH_MIMO3_ABC: - IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n"); - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - search_tbl->ant_type = ANT_ABC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - } - tbl->action++; - if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) - tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC) - tbl->action = IWL_MIMO2_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; - -} - -/* - * Try to switch to new modulation mode from MIMO3 - */ -static int rs_move_mimo3_to_other(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, - struct ieee80211_conf *conf, - struct ieee80211_sta *sta, int index) -{ - s8 is_green = lq_sta->is_green; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl_rate_scale_data *window = &(tbl->win[index]); - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - u32 sz = (sizeof(struct iwl_scale_tbl_info) - - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); - u8 start_action; - u8 valid_tx_ant = hw_params(priv).valid_tx_ant; - u8 tx_chains_num = hw_params(priv).tx_chains_num; - int ret; - u8 update_search_tbl_counter = 0; - - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - /* nothing */ - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - /* avoid antenna B and MIMO */ - if (tbl->action != IWL_MIMO3_SWITCH_SISO_A) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - /* avoid antenna B unless MIMO */ - if (tbl->action == IWL_MIMO3_SWITCH_SISO_B || - tbl->action == IWL_MIMO3_SWITCH_SISO_C) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - break; - default: - IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load); - break; - } - - if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) && - (tbl->action < IWL_MIMO3_SWITCH_SISO_A || - tbl->action > IWL_MIMO3_SWITCH_SISO_C)) { - /* switch in SISO */ - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - } - - /* configure as 1x1 if bt full concurrency */ - if (priv->bt_full_concurrent && - (tbl->action < IWL_MIMO3_SWITCH_SISO_A || - tbl->action > IWL_MIMO3_SWITCH_SISO_C)) - tbl->action = IWL_MIMO3_SWITCH_SISO_A; - - start_action = tbl->action; - for (;;) { - lq_sta->action_counter++; - switch (tbl->action) { - case IWL_MIMO3_SWITCH_ANTENNA1: - case IWL_MIMO3_SWITCH_ANTENNA2: - IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n"); - - if (tx_chains_num <= 3) - break; - - if (window->success_ratio >= IWL_RS_GOOD_RATIO) - break; - - memcpy(search_tbl, tbl, sz); - if (rs_toggle_antenna(valid_tx_ant, - &search_tbl->current_rate, search_tbl)) - goto out; - break; - case IWL_MIMO3_SWITCH_SISO_A: - case IWL_MIMO3_SWITCH_SISO_B: - case IWL_MIMO3_SWITCH_SISO_C: - IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n"); - - /* Set up new search table for SISO */ - memcpy(search_tbl, tbl, sz); - - if (tbl->action == IWL_MIMO3_SWITCH_SISO_A) - search_tbl->ant_type = ANT_A; - else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B) - search_tbl->ant_type = ANT_B; - else - search_tbl->ant_type = ANT_C; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_siso(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO3_SWITCH_MIMO2_AB: - case IWL_MIMO3_SWITCH_MIMO2_AC: - case IWL_MIMO3_SWITCH_MIMO2_BC: - IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n"); - - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = 0; - if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB) - search_tbl->ant_type = ANT_AB; - else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC) - search_tbl->ant_type = ANT_AC; - else - search_tbl->ant_type = ANT_BC; - - if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) - break; - - ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta, - search_tbl, index); - if (!ret) - goto out; - - break; - - case IWL_MIMO3_SWITCH_GI: - if (!tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_20)) - break; - if (tbl->is_ht40 && !(ht_cap->cap & - IEEE80211_HT_CAP_SGI_40)) - break; - - IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n"); - - /* Set up new search table for MIMO */ - memcpy(search_tbl, tbl, sz); - search_tbl->is_SGI = !tbl->is_SGI; - rs_set_expected_tpt_table(lq_sta, search_tbl); - /* - * If active table already uses the fastest possible - * modulation (dual stream with short guard interval), - * and it's working well, there's no need to look - * for a better type of modulation! - */ - if (tbl->is_SGI) { - s32 tpt = lq_sta->last_tpt / 100; - if (tpt >= search_tbl->expected_tpt[index]) - break; - } - search_tbl->current_rate = - rate_n_flags_from_tbl(priv, search_tbl, - index, is_green); - update_search_tbl_counter = 1; - goto out; - } - tbl->action++; - if (tbl->action > IWL_MIMO3_SWITCH_GI) - tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; - - if (tbl->action == start_action) - break; - } - search_tbl->lq_type = LQ_NONE; - return 0; - out: - lq_sta->search_better_tbl = 1; - tbl->action++; - if (tbl->action > IWL_MIMO3_SWITCH_GI) - tbl->action = IWL_MIMO3_SWITCH_ANTENNA1; - if (update_search_tbl_counter) - search_tbl->action = tbl->action; - - return 0; - -} - -/* - * Check whether we should continue using same modulation mode, or - * begin search for a new mode, based on: - * 1) # tx successes or failures while using this mode - * 2) # times calling this function - * 3) elapsed time in this mode (not used, for now) - */ -static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) -{ - struct iwl_scale_tbl_info *tbl; - int i; - int active_tbl; - int flush_interval_passed = 0; - struct iwl_priv *priv; - - priv = lq_sta->drv; - active_tbl = lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - /* If we've been disallowing search, see if we should now allow it */ - if (lq_sta->stay_in_tbl) { - - /* Elapsed time using current modulation mode */ - if (lq_sta->flush_timer) - flush_interval_passed = - time_after(jiffies, - (unsigned long)(lq_sta->flush_timer + - IWL_RATE_SCALE_FLUSH_INTVL)); - - /* - * Check if we should allow search for new modulation mode. - * If many frames have failed or succeeded, or we've used - * this same modulation for a long time, allow search, and - * reset history stats that keep track of whether we should - * allow a new search. Also (below) reset all bitmaps and - * stats in active history. - */ - if (force_search || - (lq_sta->total_failed > lq_sta->max_failure_limit) || - (lq_sta->total_success > lq_sta->max_success_limit) || - ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) - && (flush_interval_passed))) { - IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n:", - lq_sta->total_failed, - lq_sta->total_success, - flush_interval_passed); - - /* Allow search for new mode */ - lq_sta->stay_in_tbl = 0; /* only place reset */ - lq_sta->total_failed = 0; - lq_sta->total_success = 0; - lq_sta->flush_timer = 0; - - /* - * Else if we've used this modulation mode enough repetitions - * (regardless of elapsed time or success/failure), reset - * history bitmaps and rate-specific stats for all rates in - * active table. - */ - } else { - lq_sta->table_count++; - if (lq_sta->table_count >= - lq_sta->table_count_limit) { - lq_sta->table_count = 0; - - IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n"); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window( - &(tbl->win[i])); - } - } - - /* If transitioning to allow "search", reset all history - * bitmaps and stats in active table (this will become the new - * "search" table). */ - if (!lq_sta->stay_in_tbl) { - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - } - } -} - -/* - * setup rate table in uCode - */ -static void rs_update_rate_tbl(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct iwl_lq_sta *lq_sta, - struct iwl_scale_tbl_info *tbl, - int index, u8 is_green) -{ - u32 rate; - - /* Update uCode's rate table. */ - rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); - rs_fill_link_cmd(priv, lq_sta, rate); - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); -} - -/* - * Do rate scaling and search for new modulation mode. - */ -static void rs_rate_scale_perform(struct iwl_priv *priv, - struct sk_buff *skb, - struct ieee80211_sta *sta, - struct iwl_lq_sta *lq_sta) -{ - struct ieee80211_hw *hw = priv->hw; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - int low = IWL_RATE_INVALID; - int high = IWL_RATE_INVALID; - int index; - int i; - struct iwl_rate_scale_data *window = NULL; - int current_tpt = IWL_INVALID_VALUE; - int low_tpt = IWL_INVALID_VALUE; - int high_tpt = IWL_INVALID_VALUE; - u32 fail_count; - s8 scale_action = 0; - u16 rate_mask; - u8 update_lq = 0; - struct iwl_scale_tbl_info *tbl, *tbl1; - u16 rate_scale_index_msk = 0; - u8 is_green = 0; - u8 active_tbl = 0; - u8 done_search = 0; - u16 high_low; - s32 sr; - u8 tid = IWL_MAX_TID_COUNT; - struct iwl_tid_data *tid_data; - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_rxon_context *ctx = sta_priv->ctx; - - IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n"); - - /* Send management frames and NO_ACK data using lowest rate. */ - /* TODO: this could probably be improved.. */ - if (!ieee80211_is_data(hdr->frame_control) || - info->flags & IEEE80211_TX_CTL_NO_ACK) - return; - - lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; - - tid = rs_tl_add_packet(lq_sta, hdr); - if ((tid != IWL_MAX_TID_COUNT) && - (lq_sta->tx_agg_tid_en & (1 << tid))) { - tid_data = &priv->tid_data[lq_sta->lq.sta_id][tid]; - if (tid_data->agg.state == IWL_AGG_OFF) - lq_sta->is_agg = 0; - else - lq_sta->is_agg = 1; - } else - lq_sta->is_agg = 0; - - /* - * Select rate-scale / modulation-mode table to work with in - * the rest of this function: "search" if searching for better - * modulation mode, or "active" if doing rate scaling within a mode. - */ - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - if (is_legacy(tbl->lq_type)) - lq_sta->is_green = 0; - else - lq_sta->is_green = rs_use_green(sta); - is_green = lq_sta->is_green; - - /* current tx rate */ - index = lq_sta->last_txrate_idx; - - IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index, - tbl->lq_type); - - /* rates available for this association, and for modulation mode */ - rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); - - IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask); - - /* mask with station rate restriction */ - if (is_legacy(tbl->lq_type)) { - if (lq_sta->band == IEEE80211_BAND_5GHZ) - /* supp_rates has no CCK bits in A mode */ - rate_scale_index_msk = (u16) (rate_mask & - (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); - else - rate_scale_index_msk = (u16) (rate_mask & - lq_sta->supp_rates); - - } else - rate_scale_index_msk = rate_mask; - - if (!rate_scale_index_msk) - rate_scale_index_msk = rate_mask; - - if (!((1 << index) & rate_scale_index_msk)) { - IWL_ERR(priv, "Current Rate is not valid\n"); - if (lq_sta->search_better_tbl) { - /* revert to active table if search table is not valid*/ - tbl->lq_type = LQ_NONE; - lq_sta->search_better_tbl = 0; - tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - /* get "active" rate info */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - rs_update_rate_tbl(priv, ctx, lq_sta, tbl, - index, is_green); - } - return; - } - - /* Get expected throughput table and history window for current rate */ - if (!tbl->expected_tpt) { - IWL_ERR(priv, "tbl->expected_tpt is NULL\n"); - return; - } - - /* force user max rate if set by user */ - if ((lq_sta->max_rate_idx != -1) && - (lq_sta->max_rate_idx < index)) { - index = lq_sta->max_rate_idx; - update_lq = 1; - window = &(tbl->win[index]); - goto lq_update; - } - - window = &(tbl->win[index]); - - /* - * If there is not enough history to calculate actual average - * throughput, keep analyzing results of more tx frames, without - * changing rate or mode (bypass most of the rest of this function). - * Set up new rate table in uCode only if old rate is not supported - * in current association (use new rate found above). - */ - fail_count = window->counter - window->success_counter; - if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && - (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { - IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d " - "for index %d\n", - window->success_counter, window->counter, index); - - /* Can't calculate this yet; not enough history */ - window->average_tpt = IWL_INVALID_VALUE; - - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta, false); - - goto out; - } - /* Else we have enough samples; calculate estimate of - * actual average throughput */ - if (window->average_tpt != ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128)) { - IWL_ERR(priv, "expected_tpt should have been calculated by now\n"); - window->average_tpt = ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128); - } - - /* If we are searching for better modulation mode, check success. */ - if (lq_sta->search_better_tbl && - (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) { - /* If good success, continue using the "search" mode; - * no need to send new link quality command, since we're - * continuing to use the setup that we've been trying. */ - if (window->average_tpt > lq_sta->last_tpt) { - - IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - if (!is_legacy(tbl->lq_type)) - lq_sta->enable_counter = 1; - - /* Swap tables; "search" becomes "active" */ - lq_sta->active_tbl = active_tbl; - current_tpt = window->average_tpt; - - /* Else poor success; go back to mode in "active" table */ - } else { - - IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE " - "suc=%d cur-tpt=%d old-tpt=%d\n", - window->success_ratio, - window->average_tpt, - lq_sta->last_tpt); - - /* Nullify "search" table */ - tbl->lq_type = LQ_NONE; - - /* Revert to "active" table */ - active_tbl = lq_sta->active_tbl; - tbl = &(lq_sta->lq_info[active_tbl]); - - /* Revert to "active" rate and throughput info */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - current_tpt = lq_sta->last_tpt; - - /* Need to set up a new rate table in uCode */ - update_lq = 1; - } - - /* Either way, we've made a decision; modulation mode - * search is done, allow rate adjustment next time. */ - lq_sta->search_better_tbl = 0; - done_search = 1; /* Don't switch modes below! */ - goto lq_update; - } - - /* (Else) not in search of better modulation mode, try for better - * starting rate, while staying in this mode. */ - high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk, - tbl->lq_type); - low = high_low & 0xff; - high = (high_low >> 8) & 0xff; - - /* If user set max rate, dont allow higher than user constrain */ - if ((lq_sta->max_rate_idx != -1) && - (lq_sta->max_rate_idx < high)) - high = IWL_RATE_INVALID; - - sr = window->success_ratio; - - /* Collect measured throughputs for current and adjacent rates */ - current_tpt = window->average_tpt; - if (low != IWL_RATE_INVALID) - low_tpt = tbl->win[low].average_tpt; - if (high != IWL_RATE_INVALID) - high_tpt = tbl->win[high].average_tpt; - - scale_action = 0; - - /* Too many failures, decrease rate */ - if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { - IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); - scale_action = -1; - - /* No throughput measured yet for adjacent rates; try increase. */ - } else if ((low_tpt == IWL_INVALID_VALUE) && - (high_tpt == IWL_INVALID_VALUE)) { - - if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) - scale_action = 1; - else if (low != IWL_RATE_INVALID) - scale_action = 0; - } - - /* Both adjacent throughputs are measured, but neither one has better - * throughput; we're using the best rate, don't change it! */ - else if ((low_tpt != IWL_INVALID_VALUE) && - (high_tpt != IWL_INVALID_VALUE) && - (low_tpt < current_tpt) && - (high_tpt < current_tpt)) - scale_action = 0; - - /* At least one adjacent rate's throughput is measured, - * and may have better performance. */ - else { - /* Higher adjacent rate's throughput is measured */ - if (high_tpt != IWL_INVALID_VALUE) { - /* Higher rate has better throughput */ - if (high_tpt > current_tpt && - sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } else { - scale_action = 0; - } - - /* Lower adjacent rate's throughput is measured */ - } else if (low_tpt != IWL_INVALID_VALUE) { - /* Lower rate has better throughput */ - if (low_tpt > current_tpt) { - IWL_DEBUG_RATE(priv, - "decrease rate because of low tpt\n"); - scale_action = -1; - } else if (sr >= IWL_RATE_INCREASE_TH) { - scale_action = 1; - } - } - } - - /* Sanity check; asked for decrease, but success rate or throughput - * has been good at old rate. Don't change it. */ - if ((scale_action == -1) && (low != IWL_RATE_INVALID) && - ((sr > IWL_RATE_HIGH_TH) || - (current_tpt > (100 * tbl->expected_tpt[low])))) - scale_action = 0; - if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type)) - scale_action = -1; - if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) - scale_action = -1; - - if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { - if (lq_sta->last_bt_traffic > priv->bt_traffic_load) { - /* - * don't set scale_action, don't want to scale up if - * the rate scale doesn't otherwise think that is a - * good idea. - */ - } else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) { - scale_action = -1; - } - } - lq_sta->last_bt_traffic = priv->bt_traffic_load; - - if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && - (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) { - /* search for a new modulation */ - rs_stay_in_table(lq_sta, true); - goto lq_update; - } - - switch (scale_action) { - case -1: - /* Decrease starting rate, update uCode's rate table */ - if (low != IWL_RATE_INVALID) { - update_lq = 1; - index = low; - } - - break; - case 1: - /* Increase starting rate, update uCode's rate table */ - if (high != IWL_RATE_INVALID) { - update_lq = 1; - index = high; - } - - break; - case 0: - /* No change */ - default: - break; - } - - IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d " - "high %d type %d\n", - index, scale_action, low, high, tbl->lq_type); - -lq_update: - /* Replace uCode's rate table for the destination station. */ - if (update_lq) - rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green); - - if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) { - /* Should we stay with this modulation mode, - * or search for a new one? */ - rs_stay_in_table(lq_sta, false); - } - /* - * Search for new modulation mode if we're: - * 1) Not changing rates right now - * 2) Not just finishing up a search - * 3) Allowing a new search - */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { - /* Save current throughput to compare with "search" throughput*/ - lq_sta->last_tpt = current_tpt; - - /* Select a new "search" modulation mode to try. - * If one is found, set up the new "search" table. */ - if (is_legacy(tbl->lq_type)) - rs_move_legacy_other(priv, lq_sta, conf, sta, index); - else if (is_siso(tbl->lq_type)) - rs_move_siso_to_other(priv, lq_sta, conf, sta, index); - else if (is_mimo2(tbl->lq_type)) - rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index); - else - rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index); - - /* If new "search" mode was selected, set up in uCode table */ - if (lq_sta->search_better_tbl) { - /* Access the "search" table, clear its history. */ - tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(tbl->win[i])); - - /* Use new "search" start rate */ - index = iwl_hwrate_to_plcp_idx(tbl->current_rate); - - IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n", - tbl->current_rate, index); - rs_fill_link_cmd(priv, lq_sta, tbl->current_rate); - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false); - } else - done_search = 1; - } - - if (done_search && !lq_sta->stay_in_tbl) { - /* If the "active" (non-search) mode was legacy, - * and we've tried switching antennas, - * but we haven't been able to try HT modes (not available), - * stay with best antenna legacy modulation for a while - * before next round of mode comparisons. */ - tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); - if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) && - lq_sta->action_counter > tbl1->max_search) { - IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n"); - rs_set_stay_in_table(priv, 1, lq_sta); - } - - /* If we're in an HT mode, and all 3 mode switch actions - * have been tried and compared, stay in this best modulation - * mode for a while before next round of mode comparisons. */ - if (lq_sta->enable_counter && - (lq_sta->action_counter >= tbl1->max_search) && - iwl_ht_enabled(priv)) { - if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && - (lq_sta->tx_agg_tid_en & (1 << tid)) && - (tid != IWL_MAX_TID_COUNT)) { - u8 sta_id = lq_sta->lq.sta_id; - tid_data = &priv->tid_data[sta_id][tid]; - if (tid_data->agg.state == IWL_AGG_OFF) { - IWL_DEBUG_RATE(priv, - "try to aggregate tid %d\n", - tid); - rs_tl_turn_on_agg(priv, tid, - lq_sta, sta); - } - } - rs_set_stay_in_table(priv, 0, lq_sta); - } - } - -out: - tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green); - lq_sta->last_txrate_idx = index; -} - -/** - * rs_initialize_lq - Initialize a station's hardware rate table - * - * The uCode's station table contains a table of fallback rates - * for automatic fallback during transmission. - * - * NOTE: This sets up a default set of values. These will be replaced later - * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of - * rc80211_simple. - * - * NOTE: Run REPLY_ADD_STA command to set up station table entry, before - * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, - * which requires station table entry to exist). - */ -static void rs_initialize_lq(struct iwl_priv *priv, - struct ieee80211_sta *sta, - struct iwl_lq_sta *lq_sta) -{ - struct iwl_scale_tbl_info *tbl; - int rate_idx; - int i; - u32 rate; - u8 use_green = rs_use_green(sta); - u8 active_tbl = 0; - u8 valid_tx_ant; - struct iwl_station_priv *sta_priv; - struct iwl_rxon_context *ctx; - - if (!sta || !lq_sta) - return; - - sta_priv = (void *)sta->drv_priv; - ctx = sta_priv->ctx; - - i = lq_sta->last_txrate_idx; - - valid_tx_ant = hw_params(priv).valid_tx_ant; - - if (!lq_sta->search_better_tbl) - active_tbl = lq_sta->active_tbl; - else - active_tbl = 1 - lq_sta->active_tbl; - - tbl = &(lq_sta->lq_info[active_tbl]); - - if ((i < 0) || (i >= IWL_RATE_COUNT)) - i = 0; - - rate = iwl_rates[i].plcp; - tbl->ant_type = first_antenna(valid_tx_ant); - rate |= tbl->ant_type << RATE_MCS_ANT_POS; - - if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) - rate |= RATE_MCS_CCK_MSK; - - rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx); - if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) - rs_toggle_antenna(valid_tx_ant, &rate, tbl); - - rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green); - tbl->current_rate = rate; - rs_set_expected_tpt_table(lq_sta, tbl); - rs_fill_link_cmd(NULL, lq_sta, rate); - priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq; - iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true); -} - -static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, - struct ieee80211_tx_rate_control *txrc) -{ - - struct sk_buff *skb = txrc->skb; - struct ieee80211_supported_band *sband = txrc->sband; - struct iwl_op_mode *op_mode __maybe_unused = - (struct iwl_op_mode *)priv_r; - struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl_lq_sta *lq_sta = priv_sta; - int rate_idx; - - IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n"); - - /* Get max rate if user set max rate */ - if (lq_sta) { - lq_sta->max_rate_idx = txrc->max_rate_idx; - if ((sband->band == IEEE80211_BAND_5GHZ) && - (lq_sta->max_rate_idx != -1)) - lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE; - if ((lq_sta->max_rate_idx < 0) || - (lq_sta->max_rate_idx >= IWL_RATE_COUNT)) - lq_sta->max_rate_idx = -1; - } - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (lq_sta && !lq_sta->drv) { - IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n"); - priv_sta = NULL; - } - - /* Send management frames and NO_ACK data using lowest rate. */ - if (rate_control_send_low(sta, priv_sta, txrc)) - return; - - rate_idx = lq_sta->last_txrate_idx; - - if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) { - rate_idx -= IWL_FIRST_OFDM_RATE; - /* 6M and 9M shared same MCS index */ - rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0; - if (rs_extract_rate(lq_sta->last_rate_n_flags) >= - IWL_RATE_MIMO3_6M_PLCP) - rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM); - else if (rs_extract_rate(lq_sta->last_rate_n_flags) >= - IWL_RATE_MIMO2_6M_PLCP) - rate_idx = rate_idx + MCS_INDEX_PER_STREAM; - info->control.rates[0].flags = IEEE80211_TX_RC_MCS; - if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI; - if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA; - if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK) - info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD; - } else { - /* Check for invalid rates */ - if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) || - ((sband->band == IEEE80211_BAND_5GHZ) && - (rate_idx < IWL_FIRST_OFDM_RATE))) - rate_idx = rate_lowest_index(sband, sta); - /* On valid 5 GHz rate, adjust index */ - else if (sband->band == IEEE80211_BAND_5GHZ) - rate_idx -= IWL_FIRST_OFDM_RATE; - info->control.rates[0].flags = 0; - } - info->control.rates[0].idx = rate_idx; - -} - -static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, - gfp_t gfp) -{ - struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv; - struct iwl_op_mode *op_mode __maybe_unused = - (struct iwl_op_mode *)priv_rate; - struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode); - - IWL_DEBUG_RATE(priv, "create station rate scale window\n"); - - return &sta_priv->lq_sta; -} - -/* - * Called after adding a new station to initialize rate scaling - */ -void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id) -{ - int i, j; - struct ieee80211_hw *hw = priv->hw; - struct ieee80211_conf *conf = &priv->hw->conf; - struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; - struct iwl_station_priv *sta_priv; - struct iwl_lq_sta *lq_sta; - struct ieee80211_supported_band *sband; - - sta_priv = (struct iwl_station_priv *) sta->drv_priv; - lq_sta = &sta_priv->lq_sta; - sband = hw->wiphy->bands[conf->channel->band]; - - - lq_sta->lq.sta_id = sta_id; - - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); - - lq_sta->flush_timer = 0; - lq_sta->supp_rates = sta->supp_rates[sband->band]; - for (j = 0; j < LQ_SIZE; j++) - for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); - - IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n", - sta_id); - /* TODO: what is a good starting rate for STA? About middle? Maybe not - * the lowest or the highest rate.. Could consider using RSSI from - * previous packets? Need to have IEEE 802.1X auth succeed immediately - * after assoc.. */ - - lq_sta->is_dup = 0; - lq_sta->max_rate_idx = -1; - lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX; - lq_sta->is_green = rs_use_green(sta); - lq_sta->active_legacy_rate = priv->active_rate & ~(0x1000); - lq_sta->band = priv->band; - /* - * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), - * supp_rates[] does not; shift to convert format, force 9 MBits off. - */ - lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; - lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; - lq_sta->active_siso_rate &= ~((u16)0x2); - lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; - - /* Same here */ - lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; - lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; - lq_sta->active_mimo2_rate &= ~((u16)0x2); - lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; - - lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1; - lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1; - lq_sta->active_mimo3_rate &= ~((u16)0x2); - lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; - - IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n", - lq_sta->active_siso_rate, - lq_sta->active_mimo2_rate, - lq_sta->active_mimo3_rate); - - /* These values will be overridden later */ - lq_sta->lq.general_params.single_stream_ant_msk = - first_antenna(hw_params(priv).valid_tx_ant); - lq_sta->lq.general_params.dual_stream_ant_msk = - hw_params(priv).valid_tx_ant & - ~first_antenna(hw_params(priv).valid_tx_ant); - if (!lq_sta->lq.general_params.dual_stream_ant_msk) { - lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB; - } else if (num_of_ant(hw_params(priv).valid_tx_ant) == 2) { - lq_sta->lq.general_params.dual_stream_ant_msk = - hw_params(priv).valid_tx_ant; - } - - /* as default allow aggregation for all tids */ - lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; - lq_sta->drv = priv; - - /* Set last_txrate_idx to lowest rate */ - lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); - if (sband->band == IEEE80211_BAND_5GHZ) - lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; - lq_sta->is_agg = 0; -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE - priv->tm_fixed_rate = 0; -#endif -#ifdef CONFIG_MAC80211_DEBUGFS - lq_sta->dbg_fixed_rate = 0; -#endif - - rs_initialize_lq(priv, sta, lq_sta); -} - -static void rs_fill_link_cmd(struct iwl_priv *priv, - struct iwl_lq_sta *lq_sta, u32 new_rate) -{ - struct iwl_scale_tbl_info tbl_type; - int index = 0; - int rate_idx; - int repeat_rate = 0; - u8 ant_toggle_cnt = 0; - u8 use_ht_possible = 1; - u8 valid_tx_ant = 0; - struct iwl_station_priv *sta_priv = - container_of(lq_sta, struct iwl_station_priv, lq_sta); - struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq; - - /* Override starting rate (index 0) if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Interpret new_rate (rate_n_flags) */ - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, - &tbl_type, &rate_idx); - - if (priv && priv->bt_full_concurrent) { - /* 1x1 only */ - tbl_type.ant_type = - first_antenna(hw_params(priv).valid_tx_ant); - } - - /* How many times should we repeat the initial rate? */ - if (is_legacy(tbl_type.lq_type)) { - ant_toggle_cnt = 1; - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = min(IWL_HT_NUMBER_TRY, - LINK_QUAL_AGG_DISABLE_START_DEF - 1); - } - - lq_cmd->general_params.mimo_delimiter = - is_mimo(tbl_type.lq_type) ? 1 : 0; - - /* Fill 1st table entry (index 0) */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - if (num_of_ant(tbl_type.ant_type) == 1) { - lq_cmd->general_params.single_stream_ant_msk = - tbl_type.ant_type; - } else if (num_of_ant(tbl_type.ant_type) == 2) { - lq_cmd->general_params.dual_stream_ant_msk = - tbl_type.ant_type; - } /* otherwise we don't modify the existing value */ - - index++; - repeat_rate--; - if (priv) { - if (priv->bt_full_concurrent) - valid_tx_ant = ANT_A; - else - valid_tx_ant = hw_params(priv).valid_tx_ant; - } - - /* Fill rest of rate table */ - while (index < LINK_QUAL_MAX_RETRY_NUM) { - /* Repeat initial/next rate. - * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. - * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ - while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; - } - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = - cpu_to_le32(new_rate); - repeat_rate--; - index++; - } - - rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, - &rate_idx); - - if (priv && priv->bt_full_concurrent) { - /* 1x1 only */ - tbl_type.ant_type = - first_antenna(hw_params(priv).valid_tx_ant); - } - - /* Indicate to uCode which entries might be MIMO. - * If initial rate was MIMO, this will finally end up - * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ - if (is_mimo(tbl_type.lq_type)) - lq_cmd->general_params.mimo_delimiter = index; - - /* Get next rate */ - new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, - use_ht_possible); - - /* How many times should we repeat the next rate? */ - if (is_legacy(tbl_type.lq_type)) { - if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) - ant_toggle_cnt++; - else if (priv && - rs_toggle_antenna(valid_tx_ant, - &new_rate, &tbl_type)) - ant_toggle_cnt = 1; - - repeat_rate = IWL_NUMBER_TRY; - } else { - repeat_rate = IWL_HT_NUMBER_TRY; - } - - /* Don't allow HT rates after next pass. - * rs_get_lower_rate() will change type to LQ_A or LQ_G. */ - use_ht_possible = 0; - - /* Override next rate if needed for debug purposes */ - rs_dbgfs_set_mcs(lq_sta, &new_rate, index); - - /* Fill next table entry */ - lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate); - - index++; - repeat_rate--; - } - - lq_cmd->agg_params.agg_frame_cnt_limit = - sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF; - lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; - - lq_cmd->agg_params.agg_time_limit = - cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); - /* - * overwrite if needed, pass aggregation time limit - * to uCode in uSec - */ - if (priv && cfg(priv)->bt_params && - cfg(priv)->bt_params->agg_time_limit && - priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) - lq_cmd->agg_params.agg_time_limit = - cpu_to_le16(cfg(priv)->bt_params->agg_time_limit); -} - -static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) -{ - return hw->priv; -} -/* rate scale requires free function to be implemented */ -static void rs_free(void *priv_rate) -{ - return; -} - -static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta, - void *priv_sta) -{ - struct iwl_op_mode *op_mode __maybe_unused = priv_r; - struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode); - - IWL_DEBUG_RATE(priv, "enter\n"); - IWL_DEBUG_RATE(priv, "leave\n"); -} - -#ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, - u32 *rate_n_flags, int index) -{ - struct iwl_priv *priv; - u8 valid_tx_ant; - u8 ant_sel_tx; - - priv = lq_sta->drv; - valid_tx_ant = hw_params(priv).valid_tx_ant; - if (lq_sta->dbg_fixed_rate) { - ant_sel_tx = - ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) - >> RATE_MCS_ANT_POS); - if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { - *rate_n_flags = lq_sta->dbg_fixed_rate; - IWL_DEBUG_RATE(priv, "Fixed rate ON\n"); - } else { - lq_sta->dbg_fixed_rate = 0; - IWL_ERR(priv, - "Invalid antenna selection 0x%X, Valid is 0x%X\n", - ant_sel_tx, valid_tx_ant); - IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); - } - } else { - IWL_DEBUG_RATE(priv, "Fixed rate OFF\n"); - } -} - -static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - char buf[64]; - size_t buf_size; - u32 parsed_rate; - - - priv = lq_sta->drv; - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%x", &parsed_rate) == 1) - lq_sta->dbg_fixed_rate = parsed_rate; - else - lq_sta->dbg_fixed_rate = 0; - - rs_program_fix_rate(priv, lq_sta); - - return count; -} - -static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char *buff; - int desc = 0; - int i = 0; - int index = 0; - ssize_t ret; - - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_priv *priv; - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - - priv = lq_sta->drv; - buff = kmalloc(1024, GFP_KERNEL); - if (!buff) - return -ENOMEM; - - desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); - desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", - lq_sta->total_failed, lq_sta->total_success, - lq_sta->active_legacy_rate); - desc += sprintf(buff+desc, "fixed rate 0x%X\n", - lq_sta->dbg_fixed_rate); - desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", - (hw_params(priv).valid_tx_ant & ANT_A) ? "ANT_A," : "", - (hw_params(priv).valid_tx_ant & ANT_B) ? "ANT_B," : "", - (hw_params(priv).valid_tx_ant & ANT_C) ? "ANT_C" : ""); - desc += sprintf(buff+desc, "lq type %s\n", - (is_legacy(tbl->lq_type)) ? "legacy" : "HT"); - if (is_Ht(tbl->lq_type)) { - desc += sprintf(buff+desc, " %s", - (is_siso(tbl->lq_type)) ? "SISO" : - ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3")); - desc += sprintf(buff+desc, " %s", - (tbl->is_ht40) ? "40MHz" : "20MHz"); - desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "", - (lq_sta->is_green) ? "GF enabled" : "", - (lq_sta->is_agg) ? "AGG on" : ""); - } - desc += sprintf(buff+desc, "last tx rate=0x%X\n", - lq_sta->last_rate_n_flags); - desc += sprintf(buff+desc, "general:" - "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", - lq_sta->lq.general_params.flags, - lq_sta->lq.general_params.mimo_delimiter, - lq_sta->lq.general_params.single_stream_ant_msk, - lq_sta->lq.general_params.dual_stream_ant_msk); - - desc += sprintf(buff+desc, "agg:" - "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", - le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit), - lq_sta->lq.agg_params.agg_dis_start_th, - lq_sta->lq.agg_params.agg_frame_cnt_limit); - - desc += sprintf(buff+desc, - "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", - lq_sta->lq.general_params.start_rate_index[0], - lq_sta->lq.general_params.start_rate_index[1], - lq_sta->lq.general_params.start_rate_index[2], - lq_sta->lq.general_params.start_rate_index[3]); - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { - index = iwl_hwrate_to_plcp_idx( - le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags)); - if (is_legacy(tbl->lq_type)) { - desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), - iwl_rate_mcs[index].mbps); - } else { - desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n", - i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags), - iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs); - } - } - - ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); - kfree(buff); - return ret; -} - -static const struct file_operations rs_sta_dbgfs_scale_table_ops = { - .write = rs_sta_dbgfs_scale_table_write, - .read = rs_sta_dbgfs_scale_table_read, - .open = simple_open, - .llseek = default_llseek, -}; -static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char *buff; - int desc = 0; - int i, j; - ssize_t ret; - - struct iwl_lq_sta *lq_sta = file->private_data; - - buff = kmalloc(1024, GFP_KERNEL); - if (!buff) - return -ENOMEM; - - for (i = 0; i < LQ_SIZE; i++) { - desc += sprintf(buff+desc, - "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n" - "rate=0x%X\n", - lq_sta->active_tbl == i ? "*" : "x", - lq_sta->lq_info[i].lq_type, - lq_sta->lq_info[i].is_SGI, - lq_sta->lq_info[i].is_ht40, - lq_sta->lq_info[i].is_dup, - lq_sta->is_green, - lq_sta->lq_info[i].current_rate); - for (j = 0; j < IWL_RATE_COUNT; j++) { - desc += sprintf(buff+desc, - "counter=%d success=%d %%=%d\n", - lq_sta->lq_info[i].win[j].counter, - lq_sta->lq_info[i].win[j].success_counter, - lq_sta->lq_info[i].win[j].success_ratio); - } - } - ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); - kfree(buff); - return ret; -} - -static const struct file_operations rs_sta_dbgfs_stats_table_ops = { - .read = rs_sta_dbgfs_stats_table_read, - .open = simple_open, - .llseek = default_llseek, -}; - -static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - struct iwl_lq_sta *lq_sta = file->private_data; - struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; - char buff[120]; - int desc = 0; - - if (is_Ht(tbl->lq_type)) - desc += sprintf(buff+desc, - "Bit Rate= %d Mb/s\n", - tbl->expected_tpt[lq_sta->last_txrate_idx]); - else - desc += sprintf(buff+desc, - "Bit Rate= %d Mb/s\n", - iwl_rates[lq_sta->last_txrate_idx].ieee >> 1); - - return simple_read_from_buffer(user_buf, count, ppos, buff, desc); -} - -static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = { - .read = rs_sta_dbgfs_rate_scale_data_read, - .open = simple_open, - .llseek = default_llseek, -}; - -static void rs_add_debugfs(void *priv, void *priv_sta, - struct dentry *dir) -{ - struct iwl_lq_sta *lq_sta = priv_sta; - lq_sta->rs_sta_dbgfs_scale_table_file = - debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, - lq_sta, &rs_sta_dbgfs_scale_table_ops); - lq_sta->rs_sta_dbgfs_stats_table_file = - debugfs_create_file("rate_stats_table", S_IRUSR, dir, - lq_sta, &rs_sta_dbgfs_stats_table_ops); - lq_sta->rs_sta_dbgfs_rate_scale_data_file = - debugfs_create_file("rate_scale_data", S_IRUSR, dir, - lq_sta, &rs_sta_dbgfs_rate_scale_data_ops); - lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = - debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, - &lq_sta->tx_agg_tid_en); - -} - -static void rs_remove_debugfs(void *priv, void *priv_sta) -{ - struct iwl_lq_sta *lq_sta = priv_sta; - debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file); - debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); -} -#endif - -/* - * Initialization of rate scaling information is done by driver after - * the station is added. Since mac80211 calls this function before a - * station is added we ignore it. - */ -static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband, - struct ieee80211_sta *sta, void *priv_sta) -{ -} -static struct rate_control_ops rs_ops = { - .module = NULL, - .name = RS_NAME, - .tx_status = rs_tx_status, - .get_rate = rs_get_rate, - .rate_init = rs_rate_init_stub, - .alloc = rs_alloc, - .free = rs_free, - .alloc_sta = rs_alloc_sta, - .free_sta = rs_free_sta, -#ifdef CONFIG_MAC80211_DEBUGFS - .add_sta_debugfs = rs_add_debugfs, - .remove_sta_debugfs = rs_remove_debugfs, -#endif -}; - -int iwlagn_rate_control_register(void) -{ - return ieee80211_rate_control_register(&rs_ops); -} - -void iwlagn_rate_control_unregister(void) -{ - ieee80211_rate_control_unregister(&rs_ops); -} - diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rs.h deleted file mode 100644 index 203b1c13..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rs.h +++ /dev/null @@ -1,466 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_agn_rs_h__ -#define __iwl_agn_rs_h__ - -#include <net/mac80211.h> - -#include "iwl-commands.h" - -struct iwl_rate_info { - u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ - u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ - u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ - u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ - u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ - u8 prev_ieee; /* previous rate in IEEE speeds */ - u8 next_ieee; /* next rate in IEEE speeds */ - u8 prev_rs; /* previous rate used in rs algo */ - u8 next_rs; /* next rate used in rs algo */ - u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ - u8 next_rs_tgg; /* next rate used in TGG rs algo */ -}; - -/* - * These serve as indexes into - * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; - */ -enum { - IWL_RATE_1M_INDEX = 0, - IWL_RATE_2M_INDEX, - IWL_RATE_5M_INDEX, - IWL_RATE_11M_INDEX, - IWL_RATE_6M_INDEX, - IWL_RATE_9M_INDEX, - IWL_RATE_12M_INDEX, - IWL_RATE_18M_INDEX, - IWL_RATE_24M_INDEX, - IWL_RATE_36M_INDEX, - IWL_RATE_48M_INDEX, - IWL_RATE_54M_INDEX, - IWL_RATE_60M_INDEX, - IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/ - IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */ - IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, - IWL_RATE_INVALID = IWL_RATE_COUNT, -}; - -enum { - IWL_RATE_6M_INDEX_TABLE = 0, - IWL_RATE_9M_INDEX_TABLE, - IWL_RATE_12M_INDEX_TABLE, - IWL_RATE_18M_INDEX_TABLE, - IWL_RATE_24M_INDEX_TABLE, - IWL_RATE_36M_INDEX_TABLE, - IWL_RATE_48M_INDEX_TABLE, - IWL_RATE_54M_INDEX_TABLE, - IWL_RATE_1M_INDEX_TABLE, - IWL_RATE_2M_INDEX_TABLE, - IWL_RATE_5M_INDEX_TABLE, - IWL_RATE_11M_INDEX_TABLE, - IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1, -}; - -enum { - IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX, - IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX, - IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX, - IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX, -}; - -/* #define vs. enum to keep from defaulting to 'large integer' */ -#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) -#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) -#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) -#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) -#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) -#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) -#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) -#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) -#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) -#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) -#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) -#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) -#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) - -/* uCode API values for legacy bit rates, both OFDM and CCK */ -enum { - IWL_RATE_6M_PLCP = 13, - IWL_RATE_9M_PLCP = 15, - IWL_RATE_12M_PLCP = 5, - IWL_RATE_18M_PLCP = 7, - IWL_RATE_24M_PLCP = 9, - IWL_RATE_36M_PLCP = 11, - IWL_RATE_48M_PLCP = 1, - IWL_RATE_54M_PLCP = 3, - IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/ - IWL_RATE_1M_PLCP = 10, - IWL_RATE_2M_PLCP = 20, - IWL_RATE_5M_PLCP = 55, - IWL_RATE_11M_PLCP = 110, - /*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */ - /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ -}; - -/* uCode API values for OFDM high-throughput (HT) bit rates */ -enum { - IWL_RATE_SISO_6M_PLCP = 0, - IWL_RATE_SISO_12M_PLCP = 1, - IWL_RATE_SISO_18M_PLCP = 2, - IWL_RATE_SISO_24M_PLCP = 3, - IWL_RATE_SISO_36M_PLCP = 4, - IWL_RATE_SISO_48M_PLCP = 5, - IWL_RATE_SISO_54M_PLCP = 6, - IWL_RATE_SISO_60M_PLCP = 7, - IWL_RATE_MIMO2_6M_PLCP = 0x8, - IWL_RATE_MIMO2_12M_PLCP = 0x9, - IWL_RATE_MIMO2_18M_PLCP = 0xa, - IWL_RATE_MIMO2_24M_PLCP = 0xb, - IWL_RATE_MIMO2_36M_PLCP = 0xc, - IWL_RATE_MIMO2_48M_PLCP = 0xd, - IWL_RATE_MIMO2_54M_PLCP = 0xe, - IWL_RATE_MIMO2_60M_PLCP = 0xf, - IWL_RATE_MIMO3_6M_PLCP = 0x10, - IWL_RATE_MIMO3_12M_PLCP = 0x11, - IWL_RATE_MIMO3_18M_PLCP = 0x12, - IWL_RATE_MIMO3_24M_PLCP = 0x13, - IWL_RATE_MIMO3_36M_PLCP = 0x14, - IWL_RATE_MIMO3_48M_PLCP = 0x15, - IWL_RATE_MIMO3_54M_PLCP = 0x16, - IWL_RATE_MIMO3_60M_PLCP = 0x17, - IWL_RATE_SISO_INVM_PLCP, - IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, - IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, -}; - -/* MAC header values for bit rates */ -enum { - IWL_RATE_6M_IEEE = 12, - IWL_RATE_9M_IEEE = 18, - IWL_RATE_12M_IEEE = 24, - IWL_RATE_18M_IEEE = 36, - IWL_RATE_24M_IEEE = 48, - IWL_RATE_36M_IEEE = 72, - IWL_RATE_48M_IEEE = 96, - IWL_RATE_54M_IEEE = 108, - IWL_RATE_60M_IEEE = 120, - IWL_RATE_1M_IEEE = 2, - IWL_RATE_2M_IEEE = 4, - IWL_RATE_5M_IEEE = 11, - IWL_RATE_11M_IEEE = 22, -}; - -#define IWL_CCK_BASIC_RATES_MASK \ - (IWL_RATE_1M_MASK | \ - IWL_RATE_2M_MASK) - -#define IWL_CCK_RATES_MASK \ - (IWL_CCK_BASIC_RATES_MASK | \ - IWL_RATE_5M_MASK | \ - IWL_RATE_11M_MASK) - -#define IWL_OFDM_BASIC_RATES_MASK \ - (IWL_RATE_6M_MASK | \ - IWL_RATE_12M_MASK | \ - IWL_RATE_24M_MASK) - -#define IWL_OFDM_RATES_MASK \ - (IWL_OFDM_BASIC_RATES_MASK | \ - IWL_RATE_9M_MASK | \ - IWL_RATE_18M_MASK | \ - IWL_RATE_36M_MASK | \ - IWL_RATE_48M_MASK | \ - IWL_RATE_54M_MASK) - -#define IWL_BASIC_RATES_MASK \ - (IWL_OFDM_BASIC_RATES_MASK | \ - IWL_CCK_BASIC_RATES_MASK) - -#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) - -#define IWL_INVALID_VALUE -1 - -#define IWL_MIN_RSSI_VAL -100 -#define IWL_MAX_RSSI_VAL 0 - -/* These values specify how many Tx frame attempts before - * searching for a new modulation mode */ -#define IWL_LEGACY_FAILURE_LIMIT 160 -#define IWL_LEGACY_SUCCESS_LIMIT 480 -#define IWL_LEGACY_TABLE_COUNT 160 - -#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 -#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 -#define IWL_NONE_LEGACY_TABLE_COUNT 1500 - -/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ -#define IWL_RS_GOOD_RATIO 12800 /* 100% */ -#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ -#define IWL_RATE_HIGH_TH 10880 /* 85% */ -#define IWL_RATE_INCREASE_TH 6400 /* 50% */ -#define IWL_RATE_DECREASE_TH 1920 /* 15% */ - -/* possible actions when in legacy mode */ -#define IWL_LEGACY_SWITCH_ANTENNA1 0 -#define IWL_LEGACY_SWITCH_ANTENNA2 1 -#define IWL_LEGACY_SWITCH_SISO 2 -#define IWL_LEGACY_SWITCH_MIMO2_AB 3 -#define IWL_LEGACY_SWITCH_MIMO2_AC 4 -#define IWL_LEGACY_SWITCH_MIMO2_BC 5 -#define IWL_LEGACY_SWITCH_MIMO3_ABC 6 - -/* possible actions when in siso mode */ -#define IWL_SISO_SWITCH_ANTENNA1 0 -#define IWL_SISO_SWITCH_ANTENNA2 1 -#define IWL_SISO_SWITCH_MIMO2_AB 2 -#define IWL_SISO_SWITCH_MIMO2_AC 3 -#define IWL_SISO_SWITCH_MIMO2_BC 4 -#define IWL_SISO_SWITCH_GI 5 -#define IWL_SISO_SWITCH_MIMO3_ABC 6 - - -/* possible actions when in mimo mode */ -#define IWL_MIMO2_SWITCH_ANTENNA1 0 -#define IWL_MIMO2_SWITCH_ANTENNA2 1 -#define IWL_MIMO2_SWITCH_SISO_A 2 -#define IWL_MIMO2_SWITCH_SISO_B 3 -#define IWL_MIMO2_SWITCH_SISO_C 4 -#define IWL_MIMO2_SWITCH_GI 5 -#define IWL_MIMO2_SWITCH_MIMO3_ABC 6 - - -/* possible actions when in mimo3 mode */ -#define IWL_MIMO3_SWITCH_ANTENNA1 0 -#define IWL_MIMO3_SWITCH_ANTENNA2 1 -#define IWL_MIMO3_SWITCH_SISO_A 2 -#define IWL_MIMO3_SWITCH_SISO_B 3 -#define IWL_MIMO3_SWITCH_SISO_C 4 -#define IWL_MIMO3_SWITCH_MIMO2_AB 5 -#define IWL_MIMO3_SWITCH_MIMO2_AC 6 -#define IWL_MIMO3_SWITCH_MIMO2_BC 7 -#define IWL_MIMO3_SWITCH_GI 8 - - -#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI -#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC - -/*FIXME:RS:add possible actions for MIMO3*/ - -#define IWL_ACTION_LIMIT 3 /* # possible actions */ - -#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ - -/* load per tid defines for A-MPDU activation */ -#define IWL_AGG_TPT_THREHOLD 0 -#define IWL_AGG_LOAD_THRESHOLD 10 -#define IWL_AGG_ALL_TID 0xff -#define TID_QUEUE_CELL_SPACING 50 /*mS */ -#define TID_QUEUE_MAX_SIZE 20 -#define TID_ROUND_VALUE 5 /* mS */ - -#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) -#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) - -extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT]; - -enum iwl_table_type { - LQ_NONE, - LQ_G, /* legacy types */ - LQ_A, - LQ_SISO, /* high-throughput types */ - LQ_MIMO2, - LQ_MIMO3, - LQ_MAX, -}; - -#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) -#define is_siso(tbl) ((tbl) == LQ_SISO) -#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) -#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) -#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) -#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) -#define is_a_band(tbl) ((tbl) == LQ_A) -#define is_g_and(tbl) ((tbl) == LQ_G) - -#define ANT_NONE 0x0 -#define ANT_A BIT(0) -#define ANT_B BIT(1) -#define ANT_AB (ANT_A | ANT_B) -#define ANT_C BIT(2) -#define ANT_AC (ANT_A | ANT_C) -#define ANT_BC (ANT_B | ANT_C) -#define ANT_ABC (ANT_AB | ANT_C) - -#define IWL_MAX_MCS_DISPLAY_SIZE 12 - -struct iwl_rate_mcs_info { - char mbps[IWL_MAX_MCS_DISPLAY_SIZE]; - char mcs[IWL_MAX_MCS_DISPLAY_SIZE]; -}; - -/** - * struct iwl_rate_scale_data -- tx success history for one rate - */ -struct iwl_rate_scale_data { - u64 data; /* bitmap of successful frames */ - s32 success_counter; /* number of frames successful */ - s32 success_ratio; /* per-cent * 128 */ - s32 counter; /* number of frames attempted */ - s32 average_tpt; /* success ratio * expected throughput */ - unsigned long stamp; -}; - -/** - * struct iwl_scale_tbl_info -- tx params and success history for all rates - * - * There are two of these in struct iwl_lq_sta, - * one for "active", and one for "search". - */ -struct iwl_scale_tbl_info { - enum iwl_table_type lq_type; - u8 ant_type; - u8 is_SGI; /* 1 = short guard interval */ - u8 is_ht40; /* 1 = 40 MHz channel width */ - u8 is_dup; /* 1 = duplicated data streams */ - u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ - u8 max_search; /* maximun number of tables we can search */ - s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ - u32 current_rate; /* rate_n_flags, uCode API format */ - struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ -}; - -struct iwl_traffic_load { - unsigned long time_stamp; /* age of the oldest statistics */ - u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time - * slice */ - u32 total; /* total num of packets during the - * last TID_MAX_TIME_DIFF */ - u8 queue_count; /* number of queues that has - * been used since the last cleanup */ - u8 head; /* start of the circular buffer */ -}; - -/** - * struct iwl_lq_sta -- driver's rate scaling private structure - * - * Pointer to this gets passed back and forth between driver and mac80211. - */ -struct iwl_lq_sta { - u8 active_tbl; /* index of active table, range 0-1 */ - u8 enable_counter; /* indicates HT mode */ - u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ - u8 search_better_tbl; /* 1: currently trying alternate mode */ - s32 last_tpt; - - /* The following determine when to search for a new mode */ - u32 table_count_limit; - u32 max_failure_limit; /* # failed frames before new search */ - u32 max_success_limit; /* # successful frames before new search */ - u32 table_count; - u32 total_failed; /* total failed frames, any/all rates */ - u32 total_success; /* total successful frames, any/all rates */ - u64 flush_timer; /* time staying in mode before new search */ - - u8 action_counter; /* # mode-switch actions tried */ - u8 is_green; - u8 is_dup; - enum ieee80211_band band; - - /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ - u32 supp_rates; - u16 active_legacy_rate; - u16 active_siso_rate; - u16 active_mimo2_rate; - u16 active_mimo3_rate; - s8 max_rate_idx; /* Max rate set by user */ - u8 missed_rate_counter; - - struct iwl_link_quality_cmd lq; - struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ - struct iwl_traffic_load load[IWL_MAX_TID_COUNT]; - u8 tx_agg_tid_en; -#ifdef CONFIG_MAC80211_DEBUGFS - struct dentry *rs_sta_dbgfs_scale_table_file; - struct dentry *rs_sta_dbgfs_stats_table_file; - struct dentry *rs_sta_dbgfs_rate_scale_data_file; - struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; - u32 dbg_fixed_rate; -#endif - struct iwl_priv *drv; - - /* used to be in sta_info */ - int last_txrate_idx; - /* last tx rate_n_flags */ - u32 last_rate_n_flags; - /* packets destined for this STA are aggregated */ - u8 is_agg; - /* BT traffic this sta was last updated in */ - u8 last_bt_traffic; -}; - -static inline u8 num_of_ant(u8 mask) -{ - return !!((mask) & ANT_A) + - !!((mask) & ANT_B) + - !!((mask) & ANT_C); -} - -static inline u8 first_antenna(u8 mask) -{ - if (mask & ANT_A) - return ANT_A; - if (mask & ANT_B) - return ANT_B; - return ANT_C; -} - - -/* Initialize station's rate scaling information after adding station */ -extern void iwl_rs_rate_init(struct iwl_priv *priv, - struct ieee80211_sta *sta, u8 sta_id); - -/** - * iwl_rate_control_register - Register the rate control algorithm callbacks - * - * Since the rate control algorithm is hardware specific, there is no need - * or reason to place it as a stand alone module. The driver can call - * iwl_rate_control_register in order to register the rate control callbacks - * with the mac80211 subsystem. This should be performed prior to calling - * ieee80211_register_hw - * - */ -extern int iwlagn_rate_control_register(void); - -/** - * iwl_rate_control_unregister - Unregister the rate control callbacks - * - * This should be called after calling ieee80211_unregister_hw, but before - * the driver is unloaded. - */ -extern void iwlagn_rate_control_unregister(void); - -#endif /* __iwl_agn__rs__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rx.c deleted file mode 100644 index 22474608..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rx.c +++ /dev/null @@ -1,1201 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portionhelp of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/etherdevice.h> -#include <linux/slab.h> -#include <linux/sched.h> -#include <net/mac80211.h> -#include <asm/unaligned.h> -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" -#include "iwl-shared.h" - -const char *get_cmd_string(u8 cmd) -{ - switch (cmd) { - IWL_CMD(REPLY_ALIVE); - IWL_CMD(REPLY_ERROR); - IWL_CMD(REPLY_ECHO); - IWL_CMD(REPLY_RXON); - IWL_CMD(REPLY_RXON_ASSOC); - IWL_CMD(REPLY_QOS_PARAM); - IWL_CMD(REPLY_RXON_TIMING); - IWL_CMD(REPLY_ADD_STA); - IWL_CMD(REPLY_REMOVE_STA); - IWL_CMD(REPLY_REMOVE_ALL_STA); - IWL_CMD(REPLY_TXFIFO_FLUSH); - IWL_CMD(REPLY_WEPKEY); - IWL_CMD(REPLY_TX); - IWL_CMD(REPLY_LEDS_CMD); - IWL_CMD(REPLY_TX_LINK_QUALITY_CMD); - IWL_CMD(COEX_PRIORITY_TABLE_CMD); - IWL_CMD(COEX_MEDIUM_NOTIFICATION); - IWL_CMD(COEX_EVENT_CMD); - IWL_CMD(REPLY_QUIET_CMD); - IWL_CMD(REPLY_CHANNEL_SWITCH); - IWL_CMD(CHANNEL_SWITCH_NOTIFICATION); - IWL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD); - IWL_CMD(SPECTRUM_MEASURE_NOTIFICATION); - IWL_CMD(POWER_TABLE_CMD); - IWL_CMD(PM_SLEEP_NOTIFICATION); - IWL_CMD(PM_DEBUG_STATISTIC_NOTIFIC); - IWL_CMD(REPLY_SCAN_CMD); - IWL_CMD(REPLY_SCAN_ABORT_CMD); - IWL_CMD(SCAN_START_NOTIFICATION); - IWL_CMD(SCAN_RESULTS_NOTIFICATION); - IWL_CMD(SCAN_COMPLETE_NOTIFICATION); - IWL_CMD(BEACON_NOTIFICATION); - IWL_CMD(REPLY_TX_BEACON); - IWL_CMD(WHO_IS_AWAKE_NOTIFICATION); - IWL_CMD(QUIET_NOTIFICATION); - IWL_CMD(REPLY_TX_PWR_TABLE_CMD); - IWL_CMD(MEASURE_ABORT_NOTIFICATION); - IWL_CMD(REPLY_BT_CONFIG); - IWL_CMD(REPLY_STATISTICS_CMD); - IWL_CMD(STATISTICS_NOTIFICATION); - IWL_CMD(REPLY_CARD_STATE_CMD); - IWL_CMD(CARD_STATE_NOTIFICATION); - IWL_CMD(MISSED_BEACONS_NOTIFICATION); - IWL_CMD(REPLY_CT_KILL_CONFIG_CMD); - IWL_CMD(SENSITIVITY_CMD); - IWL_CMD(REPLY_PHY_CALIBRATION_CMD); - IWL_CMD(REPLY_RX_PHY_CMD); - IWL_CMD(REPLY_RX_MPDU_CMD); - IWL_CMD(REPLY_RX); - IWL_CMD(REPLY_COMPRESSED_BA); - IWL_CMD(CALIBRATION_CFG_CMD); - IWL_CMD(CALIBRATION_RES_NOTIFICATION); - IWL_CMD(CALIBRATION_COMPLETE_NOTIFICATION); - IWL_CMD(REPLY_TX_POWER_DBM_CMD); - IWL_CMD(TEMPERATURE_NOTIFICATION); - IWL_CMD(TX_ANT_CONFIGURATION_CMD); - IWL_CMD(REPLY_BT_COEX_PROFILE_NOTIF); - IWL_CMD(REPLY_BT_COEX_PRIO_TABLE); - IWL_CMD(REPLY_BT_COEX_PROT_ENV); - IWL_CMD(REPLY_WIPAN_PARAMS); - IWL_CMD(REPLY_WIPAN_RXON); - IWL_CMD(REPLY_WIPAN_RXON_TIMING); - IWL_CMD(REPLY_WIPAN_RXON_ASSOC); - IWL_CMD(REPLY_WIPAN_QOS_PARAM); - IWL_CMD(REPLY_WIPAN_WEPKEY); - IWL_CMD(REPLY_WIPAN_P2P_CHANNEL_SWITCH); - IWL_CMD(REPLY_WIPAN_NOA_NOTIFICATION); - IWL_CMD(REPLY_WIPAN_DEACTIVATION_COMPLETE); - IWL_CMD(REPLY_WOWLAN_PATTERNS); - IWL_CMD(REPLY_WOWLAN_WAKEUP_FILTER); - IWL_CMD(REPLY_WOWLAN_TSC_RSC_PARAMS); - IWL_CMD(REPLY_WOWLAN_TKIP_PARAMS); - IWL_CMD(REPLY_WOWLAN_KEK_KCK_MATERIAL); - IWL_CMD(REPLY_WOWLAN_GET_STATUS); - IWL_CMD(REPLY_D3_CONFIG); - default: - return "UNKNOWN"; - - } -} - -/****************************************************************************** - * - * Generic RX handler implementations - * - ******************************************************************************/ - -static int iwlagn_rx_reply_error(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_error_resp *err_resp = (void *)pkt->data; - - IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) " - "seq 0x%04X ser 0x%08X\n", - le32_to_cpu(err_resp->error_type), - get_cmd_string(err_resp->cmd_id), - err_resp->cmd_id, - le16_to_cpu(err_resp->bad_cmd_seq_num), - le32_to_cpu(err_resp->error_info)); - return 0; -} - -static int iwlagn_rx_csa(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_csa_notification *csa = (void *)pkt->data; - /* - * MULTI-FIXME - * See iwlagn_mac_channel_switch. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl_rxon_cmd *rxon = (void *)&ctx->active; - - if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) - return 0; - - if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { - rxon->channel = csa->channel; - ctx->staging.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - iwl_chswitch_done(priv, true); - } else { - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", - le16_to_cpu(csa->channel)); - iwl_chswitch_done(priv, false); - } - return 0; -} - - -static int iwlagn_rx_spectrum_measure_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_spectrum_notification *report = (void *)pkt->data; - - if (!report->state) { - IWL_DEBUG_11H(priv, - "Spectrum Measure Notification: Start\n"); - return 0; - } - - memcpy(&priv->measure_report, report, sizeof(*report)); - priv->measurement_status |= MEASUREMENT_READY; - return 0; -} - -static int iwlagn_rx_pm_sleep_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_sleep_notification *sleep = (void *)pkt->data; - IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n", - sleep->pm_sleep_mode, sleep->pm_wakeup_src); -#endif - return 0; -} - -static int iwlagn_rx_pm_debug_statistics_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u32 __maybe_unused len = - le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled " - "notification for %s:\n", len, - get_cmd_string(pkt->hdr.cmd)); - iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->data, len); - return 0; -} - -static int iwlagn_rx_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwlagn_beacon_notif *beacon = (void *)pkt->data; -#ifdef CONFIG_IWLWIFI_DEBUG - u16 status = le16_to_cpu(beacon->beacon_notify_hdr.status.status); - u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags); - - IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d " - "tsf:0x%.8x%.8x rate:%d\n", - status & TX_STATUS_MSK, - beacon->beacon_notify_hdr.failure_frame, - le32_to_cpu(beacon->ibss_mgr_status), - le32_to_cpu(beacon->high_tsf), - le32_to_cpu(beacon->low_tsf), rate); -#endif - - priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status); - - return 0; -} - -/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */ -#define ACK_CNT_RATIO (50) -#define BA_TIMEOUT_CNT (5) -#define BA_TIMEOUT_MAX (16) - -/** - * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries. - * - * When the ACK count ratio is low and aggregated BA timeout retries exceeding - * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal - * operation state. - */ -static bool iwlagn_good_ack_health(struct iwl_priv *priv, - struct statistics_tx *cur) -{ - int actual_delta, expected_delta, ba_timeout_delta; - struct statistics_tx *old; - - if (priv->agg_tids_count) - return true; - - lockdep_assert_held(&priv->statistics.lock); - - old = &priv->statistics.tx; - - actual_delta = le32_to_cpu(cur->actual_ack_cnt) - - le32_to_cpu(old->actual_ack_cnt); - expected_delta = le32_to_cpu(cur->expected_ack_cnt) - - le32_to_cpu(old->expected_ack_cnt); - - /* Values should not be negative, but we do not trust the firmware */ - if (actual_delta <= 0 || expected_delta <= 0) - return true; - - ba_timeout_delta = le32_to_cpu(cur->agg.ba_timeout) - - le32_to_cpu(old->agg.ba_timeout); - - if ((actual_delta * 100 / expected_delta) < ACK_CNT_RATIO && - ba_timeout_delta > BA_TIMEOUT_CNT) { - IWL_DEBUG_RADIO(priv, - "deltas: actual %d expected %d ba_timeout %d\n", - actual_delta, expected_delta, ba_timeout_delta); - -#ifdef CONFIG_IWLWIFI_DEBUGFS - /* - * This is ifdef'ed on DEBUGFS because otherwise the - * statistics aren't available. If DEBUGFS is set but - * DEBUG is not, these will just compile out. - */ - IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta %d\n", - priv->delta_stats.tx.rx_detected_cnt); - IWL_DEBUG_RADIO(priv, - "ack_or_ba_timeout_collision delta %d\n", - priv->delta_stats.tx.ack_or_ba_timeout_collision); -#endif - - if (ba_timeout_delta >= BA_TIMEOUT_MAX) - return false; - } - - return true; -} - -/** - * iwl_good_plcp_health - checks for plcp error. - * - * When the plcp error is exceeding the thresholds, reset the radio - * to improve the throughput. - */ -static bool iwlagn_good_plcp_health(struct iwl_priv *priv, - struct statistics_rx_phy *cur_ofdm, - struct statistics_rx_ht_phy *cur_ofdm_ht, - unsigned int msecs) -{ - int delta; - int threshold = priv->plcp_delta_threshold; - - if (threshold == IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) { - IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n"); - return true; - } - - delta = le32_to_cpu(cur_ofdm->plcp_err) - - le32_to_cpu(priv->statistics.rx_ofdm.plcp_err) + - le32_to_cpu(cur_ofdm_ht->plcp_err) - - le32_to_cpu(priv->statistics.rx_ofdm_ht.plcp_err); - - /* Can be negative if firmware reset statistics */ - if (delta <= 0) - return true; - - if ((delta * 100 / msecs) > threshold) { - IWL_DEBUG_RADIO(priv, - "plcp health threshold %u delta %d msecs %u\n", - threshold, delta, msecs); - return false; - } - - return true; -} - -static void iwlagn_recover_from_statistics(struct iwl_priv *priv, - struct statistics_rx_phy *cur_ofdm, - struct statistics_rx_ht_phy *cur_ofdm_ht, - struct statistics_tx *tx, - unsigned long stamp) -{ - unsigned int msecs; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - msecs = jiffies_to_msecs(stamp - priv->rx_statistics_jiffies); - - /* Only gather statistics and update time stamp when not associated */ - if (!iwl_is_any_associated(priv)) - return; - - /* Do not check/recover when do not have enough statistics data */ - if (msecs < 99) - return; - - if (iwlagn_mod_params.ack_check && !iwlagn_good_ack_health(priv, tx)) { - IWL_ERR(priv, "low ack count detected, restart firmware\n"); - if (!iwl_force_reset(priv, IWL_FW_RESET, false)) - return; - } - - if (iwlagn_mod_params.plcp_check && - !iwlagn_good_plcp_health(priv, cur_ofdm, cur_ofdm_ht, msecs)) - iwl_force_reset(priv, IWL_RF_RESET, false); -} - -/* Calculate noise level, based on measurements during network silence just - * before arriving beacon. This measurement can be done only if we know - * exactly when to expect beacons, therefore only when we're associated. */ -static void iwlagn_rx_calc_noise(struct iwl_priv *priv) -{ - struct statistics_rx_non_phy *rx_info; - int num_active_rx = 0; - int total_silence = 0; - int bcn_silence_a, bcn_silence_b, bcn_silence_c; - int last_rx_noise; - - rx_info = &priv->statistics.rx_non_phy; - - bcn_silence_a = - le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER; - bcn_silence_b = - le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER; - bcn_silence_c = - le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER; - - if (bcn_silence_a) { - total_silence += bcn_silence_a; - num_active_rx++; - } - if (bcn_silence_b) { - total_silence += bcn_silence_b; - num_active_rx++; - } - if (bcn_silence_c) { - total_silence += bcn_silence_c; - num_active_rx++; - } - - /* Average among active antennas */ - if (num_active_rx) - last_rx_noise = (total_silence / num_active_rx) - 107; - else - last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; - - IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n", - bcn_silence_a, bcn_silence_b, bcn_silence_c, - last_rx_noise); -} - -#ifdef CONFIG_IWLWIFI_DEBUGFS -/* - * based on the assumption of all statistics counter are in DWORD - * FIXME: This function is for debugging, do not deal with - * the case of counters roll-over. - */ -static void accum_stats(__le32 *prev, __le32 *cur, __le32 *delta, - __le32 *max_delta, __le32 *accum, int size) -{ - int i; - - for (i = 0; - i < size / sizeof(__le32); - i++, prev++, cur++, delta++, max_delta++, accum++) { - if (le32_to_cpu(*cur) > le32_to_cpu(*prev)) { - *delta = cpu_to_le32( - le32_to_cpu(*cur) - le32_to_cpu(*prev)); - le32_add_cpu(accum, le32_to_cpu(*delta)); - if (le32_to_cpu(*delta) > le32_to_cpu(*max_delta)) - *max_delta = *delta; - } - } -} - -static void -iwlagn_accumulative_statistics(struct iwl_priv *priv, - struct statistics_general_common *common, - struct statistics_rx_non_phy *rx_non_phy, - struct statistics_rx_phy *rx_ofdm, - struct statistics_rx_ht_phy *rx_ofdm_ht, - struct statistics_rx_phy *rx_cck, - struct statistics_tx *tx, - struct statistics_bt_activity *bt_activity) -{ -#define ACCUM(_name) \ - accum_stats((__le32 *)&priv->statistics._name, \ - (__le32 *)_name, \ - (__le32 *)&priv->delta_stats._name, \ - (__le32 *)&priv->max_delta_stats._name, \ - (__le32 *)&priv->accum_stats._name, \ - sizeof(*_name)); - - ACCUM(common); - ACCUM(rx_non_phy); - ACCUM(rx_ofdm); - ACCUM(rx_ofdm_ht); - ACCUM(rx_cck); - ACCUM(tx); - if (bt_activity) - ACCUM(bt_activity); -#undef ACCUM -} -#else -static inline void -iwlagn_accumulative_statistics(struct iwl_priv *priv, - struct statistics_general_common *common, - struct statistics_rx_non_phy *rx_non_phy, - struct statistics_rx_phy *rx_ofdm, - struct statistics_rx_ht_phy *rx_ofdm_ht, - struct statistics_rx_phy *rx_cck, - struct statistics_tx *tx, - struct statistics_bt_activity *bt_activity) -{ -} -#endif - -static int iwlagn_rx_statistics(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - unsigned long stamp = jiffies; - const int reg_recalib_period = 60; - int change; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - __le32 *flag; - struct statistics_general_common *common; - struct statistics_rx_non_phy *rx_non_phy; - struct statistics_rx_phy *rx_ofdm; - struct statistics_rx_ht_phy *rx_ofdm_ht; - struct statistics_rx_phy *rx_cck; - struct statistics_tx *tx; - struct statistics_bt_activity *bt_activity; - - len -= sizeof(struct iwl_cmd_header); /* skip header */ - - IWL_DEBUG_RX(priv, "Statistics notification received (%d bytes).\n", - len); - - spin_lock(&priv->statistics.lock); - - if (len == sizeof(struct iwl_bt_notif_statistics)) { - struct iwl_bt_notif_statistics *stats; - stats = (void *)&pkt->data; - flag = &stats->flag; - common = &stats->general.common; - rx_non_phy = &stats->rx.general.common; - rx_ofdm = &stats->rx.ofdm; - rx_ofdm_ht = &stats->rx.ofdm_ht; - rx_cck = &stats->rx.cck; - tx = &stats->tx; - bt_activity = &stats->general.activity; - -#ifdef CONFIG_IWLWIFI_DEBUGFS - /* handle this exception directly */ - priv->statistics.num_bt_kills = stats->rx.general.num_bt_kills; - le32_add_cpu(&priv->statistics.accum_num_bt_kills, - le32_to_cpu(stats->rx.general.num_bt_kills)); -#endif - } else if (len == sizeof(struct iwl_notif_statistics)) { - struct iwl_notif_statistics *stats; - stats = (void *)&pkt->data; - flag = &stats->flag; - common = &stats->general.common; - rx_non_phy = &stats->rx.general; - rx_ofdm = &stats->rx.ofdm; - rx_ofdm_ht = &stats->rx.ofdm_ht; - rx_cck = &stats->rx.cck; - tx = &stats->tx; - bt_activity = NULL; - } else { - WARN_ONCE(1, "len %d doesn't match BT (%zu) or normal (%zu)\n", - len, sizeof(struct iwl_bt_notif_statistics), - sizeof(struct iwl_notif_statistics)); - spin_unlock(&priv->statistics.lock); - return 0; - } - - change = common->temperature != priv->statistics.common.temperature || - (*flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK) != - (priv->statistics.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK); - - iwlagn_accumulative_statistics(priv, common, rx_non_phy, rx_ofdm, - rx_ofdm_ht, rx_cck, tx, bt_activity); - - iwlagn_recover_from_statistics(priv, rx_ofdm, rx_ofdm_ht, tx, stamp); - - priv->statistics.flag = *flag; - memcpy(&priv->statistics.common, common, sizeof(*common)); - memcpy(&priv->statistics.rx_non_phy, rx_non_phy, sizeof(*rx_non_phy)); - memcpy(&priv->statistics.rx_ofdm, rx_ofdm, sizeof(*rx_ofdm)); - memcpy(&priv->statistics.rx_ofdm_ht, rx_ofdm_ht, sizeof(*rx_ofdm_ht)); - memcpy(&priv->statistics.rx_cck, rx_cck, sizeof(*rx_cck)); - memcpy(&priv->statistics.tx, tx, sizeof(*tx)); -#ifdef CONFIG_IWLWIFI_DEBUGFS - if (bt_activity) - memcpy(&priv->statistics.bt_activity, bt_activity, - sizeof(*bt_activity)); -#endif - - priv->rx_statistics_jiffies = stamp; - - set_bit(STATUS_STATISTICS, &priv->status); - - /* Reschedule the statistics timer to occur in - * reg_recalib_period seconds to ensure we get a - * thermal update even if the uCode doesn't give - * us one */ - mod_timer(&priv->statistics_periodic, jiffies + - msecs_to_jiffies(reg_recalib_period * 1000)); - - if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) && - (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) { - iwlagn_rx_calc_noise(priv); - queue_work(priv->workqueue, &priv->run_time_calib_work); - } - if (cfg(priv)->lib->temperature && change) - cfg(priv)->lib->temperature(priv); - - spin_unlock(&priv->statistics.lock); - - return 0; -} - -static int iwlagn_rx_reply_statistics(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_notif_statistics *stats = (void *)pkt->data; - - if (le32_to_cpu(stats->flag) & UCODE_STATISTICS_CLEAR_MSK) { -#ifdef CONFIG_IWLWIFI_DEBUGFS - memset(&priv->accum_stats, 0, - sizeof(priv->accum_stats)); - memset(&priv->delta_stats, 0, - sizeof(priv->delta_stats)); - memset(&priv->max_delta_stats, 0, - sizeof(priv->max_delta_stats)); -#endif - IWL_DEBUG_RX(priv, "Statistics have been cleared\n"); - } - iwlagn_rx_statistics(priv, rxb, cmd); - return 0; -} - -/* Handle notification from uCode that card's power state is changing - * due to software, hardware, or critical temperature RFKILL */ -static int iwlagn_rx_card_state_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_card_state_notif *card_state_notif = (void *)pkt->data; - u32 flags = le32_to_cpu(card_state_notif->flags); - unsigned long status = priv->status; - - IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n", - (flags & HW_CARD_DISABLED) ? "Kill" : "On", - (flags & SW_CARD_DISABLED) ? "Kill" : "On", - (flags & CT_CARD_DISABLED) ? - "Reached" : "Not reached"); - - if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | - CT_CARD_DISABLED)) { - - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - iwl_write_direct32(trans(priv), HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - - if (!(flags & RXON_CARD_DISABLED)) { - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - iwl_write_direct32(trans(priv), HBUS_TARG_MBX_C, - HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED); - } - if (flags & CT_CARD_DISABLED) - iwl_tt_enter_ct_kill(priv); - } - if (!(flags & CT_CARD_DISABLED)) - iwl_tt_exit_ct_kill(priv); - - if (flags & HW_CARD_DISABLED) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - - if (!(flags & RXON_CARD_DISABLED)) - iwl_scan_cancel(priv); - - if ((test_bit(STATUS_RF_KILL_HW, &status) != - test_bit(STATUS_RF_KILL_HW, &priv->status))) - wiphy_rfkill_set_hw_state(priv->hw->wiphy, - test_bit(STATUS_RF_KILL_HW, &priv->status)); - else - wake_up(&trans(priv)->wait_command_queue); - return 0; -} - -static int iwlagn_rx_missed_beacon_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) - -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_missed_beacon_notif *missed_beacon = (void *)pkt->data; - - if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) > - priv->missed_beacon_threshold) { - IWL_DEBUG_CALIB(priv, - "missed bcn cnsq %d totl %d rcd %d expctd %d\n", - le32_to_cpu(missed_beacon->consecutive_missed_beacons), - le32_to_cpu(missed_beacon->total_missed_becons), - le32_to_cpu(missed_beacon->num_recvd_beacons), - le32_to_cpu(missed_beacon->num_expected_beacons)); - if (!test_bit(STATUS_SCANNING, &priv->status)) - iwl_init_sensitivity(priv); - } - return 0; -} - -/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). - * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ -static int iwlagn_rx_reply_rx_phy(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - - priv->last_phy_res_valid = true; - memcpy(&priv->last_phy_res, pkt->data, - sizeof(struct iwl_rx_phy_res)); - return 0; -} - -/* - * returns non-zero if packet should be dropped - */ -static int iwlagn_set_decrypted_flag(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - u32 decrypt_res, - struct ieee80211_rx_status *stats) -{ - u16 fc = le16_to_cpu(hdr->frame_control); - - /* - * All contexts have the same setting here due to it being - * a module parameter, so OK to check any context. - */ - if (priv->contexts[IWL_RXON_CTX_BSS].active.filter_flags & - RXON_FILTER_DIS_DECRYPT_MSK) - return 0; - - if (!(fc & IEEE80211_FCTL_PROTECTED)) - return 0; - - IWL_DEBUG_RX(priv, "decrypt_res:0x%x\n", decrypt_res); - switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) { - case RX_RES_STATUS_SEC_TYPE_TKIP: - /* The uCode has got a bad phase 1 Key, pushes the packet. - * Decryption will be done in SW. */ - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_BAD_KEY_TTAK) - break; - - case RX_RES_STATUS_SEC_TYPE_WEP: - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_BAD_ICV_MIC) { - /* bad ICV, the packet is destroyed since the - * decryption is inplace, drop it */ - IWL_DEBUG_RX(priv, "Packet destroyed\n"); - return -1; - } - case RX_RES_STATUS_SEC_TYPE_CCMP: - if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) == - RX_RES_STATUS_DECRYPT_OK) { - IWL_DEBUG_RX(priv, "hw decrypt successfully!!!\n"); - stats->flag |= RX_FLAG_DECRYPTED; - } - break; - - default: - break; - } - return 0; -} - -static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - u16 len, - u32 ampdu_status, - struct iwl_rx_cmd_buffer *rxb, - struct ieee80211_rx_status *stats) -{ - struct sk_buff *skb; - __le16 fc = hdr->frame_control; - struct iwl_rxon_context *ctx; - unsigned int hdrlen, fraglen; - - /* We only process data packets if the interface is open */ - if (unlikely(!priv->is_open)) { - IWL_DEBUG_DROP_LIMIT(priv, - "Dropping packet while interface is not open.\n"); - return; - } - - /* In case of HW accelerated crypto and bad decryption, drop */ - if (!iwlagn_mod_params.sw_crypto && - iwlagn_set_decrypted_flag(priv, hdr, ampdu_status, stats)) - return; - - /* Dont use dev_alloc_skb(), we'll have enough headroom once - * ieee80211_hdr pulled. - */ - skb = alloc_skb(128, GFP_ATOMIC); - if (!skb) { - IWL_ERR(priv, "alloc_skb failed\n"); - return; - } - hdrlen = min_t(unsigned int, len, skb_tailroom(skb)); - memcpy(skb_put(skb, hdrlen), hdr, hdrlen); - fraglen = len - hdrlen; - - if (fraglen) { - int offset = (void *)hdr + hdrlen - rxb_addr(rxb); - - skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset, - fraglen, rxb->truesize); - } - iwl_update_stats(priv, false, fc, len); - - /* - * Wake any queues that were stopped due to a passive channel tx - * failure. This can happen because the regulatory enforcement in - * the device waits for a beacon before allowing transmission, - * sometimes even after already having transmitted frames for the - * association because the new RXON may reset the information. - */ - if (unlikely(ieee80211_is_beacon(fc) && priv->passive_no_rx)) { - for_each_context(priv, ctx) { - if (compare_ether_addr(hdr->addr3, - ctx->active.bssid_addr)) - continue; - iwlagn_lift_passive_no_rx(priv); - } - } - - memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); - - ieee80211_rx(priv->hw, skb); -} - -static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) -{ - u32 decrypt_out = 0; - - if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == - RX_RES_STATUS_STATION_FOUND) - decrypt_out |= (RX_RES_STATUS_STATION_FOUND | - RX_RES_STATUS_NO_STATION_INFO_MISMATCH); - - decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); - - /* packet was not encrypted */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_NONE) - return decrypt_out; - - /* packet was encrypted with unknown alg */ - if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == - RX_RES_STATUS_SEC_TYPE_ERR) - return decrypt_out; - - /* decryption was not done in HW */ - if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != - RX_MPDU_RES_STATUS_DEC_DONE_MSK) - return decrypt_out; - - switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { - - case RX_RES_STATUS_SEC_TYPE_CCMP: - /* alg is CCM: check MIC only */ - if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) - /* Bad MIC */ - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - - break; - - case RX_RES_STATUS_SEC_TYPE_TKIP: - if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { - /* Bad TTAK */ - decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; - break; - } - /* fall through if TTAK OK */ - default: - if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) - decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; - else - decrypt_out |= RX_RES_STATUS_DECRYPT_OK; - break; - } - - IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n", - decrypt_in, decrypt_out); - - return decrypt_out; -} - -/* Calc max signal level (dBm) among 3 possible receivers */ -static int iwlagn_calc_rssi(struct iwl_priv *priv, - struct iwl_rx_phy_res *rx_resp) -{ - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host - */ - struct iwlagn_non_cfg_phy *ncphy = - (struct iwlagn_non_cfg_phy *)rx_resp->non_cfg_phy_buf; - u32 val, rssi_a, rssi_b, rssi_c, max_rssi; - u8 agc; - - val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_AGC_IDX]); - agc = (val & IWLAGN_OFDM_AGC_MSK) >> IWLAGN_OFDM_AGC_BIT_POS; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. - */ - val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_AB_IDX]); - rssi_a = (val & IWLAGN_OFDM_RSSI_INBAND_A_BITMSK) >> - IWLAGN_OFDM_RSSI_A_BIT_POS; - rssi_b = (val & IWLAGN_OFDM_RSSI_INBAND_B_BITMSK) >> - IWLAGN_OFDM_RSSI_B_BIT_POS; - val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_C_IDX]); - rssi_c = (val & IWLAGN_OFDM_RSSI_INBAND_C_BITMSK) >> - IWLAGN_OFDM_RSSI_C_BIT_POS; - - max_rssi = max_t(u32, rssi_a, rssi_b); - max_rssi = max_t(u32, max_rssi, rssi_c); - - IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", - rssi_a, rssi_b, rssi_c, max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc - IWLAGN_RSSI_OFFSET; -} - -/* Called for REPLY_RX (legacy ABG frames), or - * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ -static int iwlagn_rx_reply_rx(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct ieee80211_hdr *header; - struct ieee80211_rx_status rx_status; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_rx_phy_res *phy_res; - __le32 rx_pkt_status; - struct iwl_rx_mpdu_res_start *amsdu; - u32 len; - u32 ampdu_status; - u32 rate_n_flags; - - /** - * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently. - * REPLY_RX: physical layer info is in this buffer - * REPLY_RX_MPDU_CMD: physical layer info was sent in separate - * command and cached in priv->last_phy_res - * - * Here we set up local variables depending on which command is - * received. - */ - if (pkt->hdr.cmd == REPLY_RX) { - phy_res = (struct iwl_rx_phy_res *)pkt->data; - header = (struct ieee80211_hdr *)(pkt->data + sizeof(*phy_res) - + phy_res->cfg_phy_cnt); - - len = le16_to_cpu(phy_res->byte_count); - rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*phy_res) + - phy_res->cfg_phy_cnt + len); - ampdu_status = le32_to_cpu(rx_pkt_status); - } else { - if (!priv->last_phy_res_valid) { - IWL_ERR(priv, "MPDU frame without cached PHY data\n"); - return 0; - } - phy_res = &priv->last_phy_res; - amsdu = (struct iwl_rx_mpdu_res_start *)pkt->data; - header = (struct ieee80211_hdr *)(pkt->data + sizeof(*amsdu)); - len = le16_to_cpu(amsdu->byte_count); - rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*amsdu) + len); - ampdu_status = iwlagn_translate_rx_status(priv, - le32_to_cpu(rx_pkt_status)); - } - - if ((unlikely(phy_res->cfg_phy_cnt > 20))) { - IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", - phy_res->cfg_phy_cnt); - return 0; - } - - if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || - !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { - IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", - le32_to_cpu(rx_pkt_status)); - return 0; - } - - /* This will be used in several places later */ - rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); - - /* rx_status carries information about the packet to mac80211 */ - rx_status.mactime = le64_to_cpu(phy_res->timestamp); - rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - rx_status.freq = - ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), - rx_status.band); - rx_status.rate_idx = - iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); - rx_status.flag = 0; - - /* TSF isn't reliable. In order to allow smooth user experience, - * this W/A doesn't propagate it to the mac80211 */ - /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ - - priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); - - /* Find max signal strength (dBm) among 3 antenna/receiver chains */ - rx_status.signal = iwlagn_calc_rssi(priv, phy_res); - - iwl_dbg_log_rx_data_frame(priv, len, header); - IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n", - rx_status.signal, (unsigned long long)rx_status.mactime); - - /* - * "antenna number" - * - * It seems that the antenna field in the phy flags value - * is actually a bit field. This is undefined by radiotap, - * it wants an actual antenna number but I always get "7" - * for most legacy frames I receive indicating that the - * same frame was received on all three RX chains. - * - * I think this field should be removed in favor of a - * new 802.11n radiotap field "RX chains" that is defined - * as a bitmask. - */ - rx_status.antenna = - (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) - >> RX_RES_PHY_FLAGS_ANTENNA_POS; - - /* set the preamble flag if appropriate */ - if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) - rx_status.flag |= RX_FLAG_SHORTPRE; - - /* Set up the HT phy flags */ - if (rate_n_flags & RATE_MCS_HT_MSK) - rx_status.flag |= RX_FLAG_HT; - if (rate_n_flags & RATE_MCS_HT40_MSK) - rx_status.flag |= RX_FLAG_40MHZ; - if (rate_n_flags & RATE_MCS_SGI_MSK) - rx_status.flag |= RX_FLAG_SHORT_GI; - - iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status, - rxb, &rx_status); - return 0; -} - -static int iwlagn_rx_noa_notification(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_wipan_noa_data *new_data, *old_data; - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_wipan_noa_notification *noa_notif = (void *)pkt->data; - - /* no condition -- we're in softirq */ - old_data = rcu_dereference_protected(priv->noa_data, true); - - if (noa_notif->noa_active) { - u32 len = le16_to_cpu(noa_notif->noa_attribute.length); - u32 copylen = len; - - /* EID, len, OUI, subtype */ - len += 1 + 1 + 3 + 1; - /* P2P id, P2P length */ - len += 1 + 2; - copylen += 1 + 2; - - new_data = kmalloc(sizeof(*new_data) + len, GFP_ATOMIC); - if (new_data) { - new_data->length = len; - new_data->data[0] = WLAN_EID_VENDOR_SPECIFIC; - new_data->data[1] = len - 2; /* not counting EID, len */ - new_data->data[2] = (WLAN_OUI_WFA >> 16) & 0xff; - new_data->data[3] = (WLAN_OUI_WFA >> 8) & 0xff; - new_data->data[4] = (WLAN_OUI_WFA >> 0) & 0xff; - new_data->data[5] = WLAN_OUI_TYPE_WFA_P2P; - memcpy(&new_data->data[6], &noa_notif->noa_attribute, - copylen); - } - } else - new_data = NULL; - - rcu_assign_pointer(priv->noa_data, new_data); - - if (old_data) - kfree_rcu(old_data, rcu_head); - - return 0; -} - -/** - * iwl_setup_rx_handlers - Initialize Rx handler callbacks - * - * Setup the RX handlers for each of the reply types sent from the uCode - * to the host. - */ -void iwl_setup_rx_handlers(struct iwl_priv *priv) -{ - int (**handlers)(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); - - handlers = priv->rx_handlers; - - handlers[REPLY_ERROR] = iwlagn_rx_reply_error; - handlers[CHANNEL_SWITCH_NOTIFICATION] = iwlagn_rx_csa; - handlers[SPECTRUM_MEASURE_NOTIFICATION] = - iwlagn_rx_spectrum_measure_notif; - handlers[PM_SLEEP_NOTIFICATION] = iwlagn_rx_pm_sleep_notif; - handlers[PM_DEBUG_STATISTIC_NOTIFIC] = - iwlagn_rx_pm_debug_statistics_notif; - handlers[BEACON_NOTIFICATION] = iwlagn_rx_beacon_notif; - handlers[REPLY_ADD_STA] = iwl_add_sta_callback; - - handlers[REPLY_WIPAN_NOA_NOTIFICATION] = iwlagn_rx_noa_notification; - - /* - * The same handler is used for both the REPLY to a discrete - * statistics request from the host as well as for the periodic - * statistics notifications (after received beacons) from the uCode. - */ - handlers[REPLY_STATISTICS_CMD] = iwlagn_rx_reply_statistics; - handlers[STATISTICS_NOTIFICATION] = iwlagn_rx_statistics; - - iwl_setup_rx_scan_handlers(priv); - - handlers[CARD_STATE_NOTIFICATION] = iwlagn_rx_card_state_notif; - handlers[MISSED_BEACONS_NOTIFICATION] = - iwlagn_rx_missed_beacon_notif; - - /* Rx handlers */ - handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy; - handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx; - - /* block ack */ - handlers[REPLY_COMPRESSED_BA] = - iwlagn_rx_reply_compressed_ba; - - /* init calibration handlers */ - priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] = - iwlagn_rx_calib_result; - priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx; - - /* set up notification wait support */ - iwl_notification_wait_init(&priv->notif_wait); - - /* Set up BT Rx handlers */ - if (cfg(priv)->bt_params) - iwlagn_bt_rx_handler_setup(priv); -} - -int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - void (*pre_rx_handler)(struct iwl_priv *, - struct iwl_rx_cmd_buffer *); - int err = 0; - - /* - * Do the notification wait before RX handlers so - * even if the RX handler consumes the RXB we have - * access to it in the notification wait entry. - */ - iwl_notification_wait_notify(&priv->notif_wait, pkt); - - /* RX data may be forwarded to userspace (using pre_rx_handler) in one - * of two cases: the first, that the user owns the uCode through - * testmode - in such case the pre_rx_handler is set and no further - * processing takes place. The other case is when the user want to - * monitor the rx w/o affecting the regular flow - the pre_rx_handler - * will be set but the ownership flag != IWL_OWNERSHIP_TM and the flow - * continues. - * We need to use ACCESS_ONCE to prevent a case where the handler - * changes between the check and the call. - */ - pre_rx_handler = ACCESS_ONCE(priv->pre_rx_handler); - if (pre_rx_handler) - pre_rx_handler(priv, rxb); - if (priv->ucode_owner != IWL_OWNERSHIP_TM) { - /* Based on type of command response or notification, - * handle those that need handling via function in - * rx_handlers table. See iwl_setup_rx_handlers() */ - if (priv->rx_handlers[pkt->hdr.cmd]) { - priv->rx_handlers_stats[pkt->hdr.cmd]++; - err = priv->rx_handlers[pkt->hdr.cmd] (priv, rxb, cmd); - } else { - /* No handling needed */ - IWL_DEBUG_RX(priv, - "No handler needed for %s, 0x%02x\n", - get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - } - } - return err; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c deleted file mode 100644 index 2e1a3179..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ /dev/null @@ -1,953 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include "iwl-dev.h" -#include "iwl-agn.h" -#include "iwl-core.h" -#include "iwl-agn-calib.h" -#include "iwl-trans.h" -#include "iwl-shared.h" - -static int iwlagn_disable_bss(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct iwl_rxon_cmd *send) -{ - __le32 old_filter = send->filter_flags; - int ret; - - send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, - CMD_SYNC, sizeof(*send), send); - - send->filter_flags = old_filter; - - if (ret) - IWL_DEBUG_QUIET_RFKILL(priv, - "Error clearing ASSOC_MSK on BSS (%d)\n", ret); - - return ret; -} - -static int iwlagn_disable_pan(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct iwl_rxon_cmd *send) -{ - struct iwl_notification_wait disable_wait; - __le32 old_filter = send->filter_flags; - u8 old_dev_type = send->dev_type; - int ret; - - iwl_init_notification_wait(&priv->notif_wait, &disable_wait, - REPLY_WIPAN_DEACTIVATION_COMPLETE, - NULL, NULL); - - send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - send->dev_type = RXON_DEV_TYPE_P2P; - ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, - CMD_SYNC, sizeof(*send), send); - - send->filter_flags = old_filter; - send->dev_type = old_dev_type; - - if (ret) { - IWL_ERR(priv, "Error disabling PAN (%d)\n", ret); - iwl_remove_notification(&priv->notif_wait, &disable_wait); - } else { - ret = iwl_wait_notification(&priv->notif_wait, - &disable_wait, HZ); - if (ret) - IWL_ERR(priv, "Timed out waiting for PAN disable\n"); - } - - return ret; -} - -static int iwlagn_disconn_pan(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct iwl_rxon_cmd *send) -{ - __le32 old_filter = send->filter_flags; - int ret; - - send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC, - sizeof(*send), send); - - send->filter_flags = old_filter; - - return ret; -} - -static void iwlagn_update_qos(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int ret; - - if (!ctx->is_active) - return; - - ctx->qos_data.def_qos_parm.qos_flags = 0; - - if (ctx->qos_data.qos_active) - ctx->qos_data.def_qos_parm.qos_flags |= - QOS_PARAM_FLG_UPDATE_EDCA_MSK; - - if (ctx->ht.enabled) - ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; - - IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", - ctx->qos_data.qos_active, - ctx->qos_data.def_qos_parm.qos_flags); - - ret = iwl_dvm_send_cmd_pdu(priv, ctx->qos_cmd, CMD_SYNC, - sizeof(struct iwl_qosparam_cmd), - &ctx->qos_data.def_qos_parm); - if (ret) - IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n"); -} - -static int iwlagn_update_beacon(struct iwl_priv *priv, - struct ieee80211_vif *vif) -{ - lockdep_assert_held(&priv->mutex); - - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif); - if (!priv->beacon_skb) - return -ENOMEM; - return iwlagn_send_beacon_cmd(priv); -} - -static int iwlagn_send_rxon_assoc(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int ret = 0; - struct iwl_rxon_assoc_cmd rxon_assoc; - const struct iwl_rxon_cmd *rxon1 = &ctx->staging; - const struct iwl_rxon_cmd *rxon2 = &ctx->active; - - if ((rxon1->flags == rxon2->flags) && - (rxon1->filter_flags == rxon2->filter_flags) && - (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && - (rxon1->ofdm_ht_single_stream_basic_rates == - rxon2->ofdm_ht_single_stream_basic_rates) && - (rxon1->ofdm_ht_dual_stream_basic_rates == - rxon2->ofdm_ht_dual_stream_basic_rates) && - (rxon1->ofdm_ht_triple_stream_basic_rates == - rxon2->ofdm_ht_triple_stream_basic_rates) && - (rxon1->acquisition_data == rxon2->acquisition_data) && - (rxon1->rx_chain == rxon2->rx_chain) && - (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { - IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n"); - return 0; - } - - rxon_assoc.flags = ctx->staging.flags; - rxon_assoc.filter_flags = ctx->staging.filter_flags; - rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; - rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; - rxon_assoc.reserved1 = 0; - rxon_assoc.reserved2 = 0; - rxon_assoc.reserved3 = 0; - rxon_assoc.ofdm_ht_single_stream_basic_rates = - ctx->staging.ofdm_ht_single_stream_basic_rates; - rxon_assoc.ofdm_ht_dual_stream_basic_rates = - ctx->staging.ofdm_ht_dual_stream_basic_rates; - rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain; - rxon_assoc.ofdm_ht_triple_stream_basic_rates = - ctx->staging.ofdm_ht_triple_stream_basic_rates; - rxon_assoc.acquisition_data = ctx->staging.acquisition_data; - - ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_assoc_cmd, - CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc); - return ret; -} - -static int iwlagn_rxon_disconn(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int ret; - struct iwl_rxon_cmd *active = (void *)&ctx->active; - - if (ctx->ctxid == IWL_RXON_CTX_BSS) { - ret = iwlagn_disable_bss(priv, ctx, &ctx->staging); - } else { - ret = iwlagn_disable_pan(priv, ctx, &ctx->staging); - if (ret) - return ret; - if (ctx->vif) { - ret = iwl_send_rxon_timing(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); - return ret; - } - ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging); - } - } - if (ret) - return ret; - - /* - * Un-assoc RXON clears the station table and WEP - * keys, so we have to restore those afterwards. - */ - iwl_clear_ucode_stations(priv, ctx); - /* update -- might need P2P now */ - iwl_update_bcast_station(priv, ctx); - iwl_restore_stations(priv, ctx); - ret = iwl_restore_default_wep_keys(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); - return ret; - } - - memcpy(active, &ctx->staging, sizeof(*active)); - return 0; -} - -static int iwlagn_rxon_connect(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int ret; - struct iwl_rxon_cmd *active = (void *)&ctx->active; - - /* RXON timing must be before associated RXON */ - if (ctx->ctxid == IWL_RXON_CTX_BSS) { - ret = iwl_send_rxon_timing(priv, ctx); - if (ret) { - IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); - return ret; - } - } - /* QoS info may be cleared by previous un-assoc RXON */ - iwlagn_update_qos(priv, ctx); - - /* - * We'll run into this code path when beaconing is - * enabled, but then we also need to send the beacon - * to the device. - */ - if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) { - ret = iwlagn_update_beacon(priv, ctx->vif); - if (ret) { - IWL_ERR(priv, - "Error sending required beacon (%d)!\n", - ret); - return ret; - } - } - - priv->start_calib = 0; - /* - * Apply the new configuration. - * - * Associated RXON doesn't clear the station table in uCode, - * so we don't need to restore stations etc. after this. - */ - ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC, - sizeof(struct iwl_rxon_cmd), &ctx->staging); - if (ret) { - IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); - return ret; - } - memcpy(active, &ctx->staging, sizeof(*active)); - - /* IBSS beacon needs to be sent after setting assoc */ - if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC)) - if (iwlagn_update_beacon(priv, ctx->vif)) - IWL_ERR(priv, "Error sending IBSS beacon\n"); - iwl_init_sensitivity(priv); - - /* - * If we issue a new RXON command which required a tune then - * we must send a new TXPOWER command or we won't be able to - * Tx any frames. - * - * It's expected we set power here if channel is changing. - */ - ret = iwl_set_tx_power(priv, priv->tx_power_next, true); - if (ret) { - IWL_ERR(priv, "Error sending TX power (%d)\n", ret); - return ret; - } - - if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION && - cfg(priv)->ht_params && cfg(priv)->ht_params->smps_mode) - ieee80211_request_smps(ctx->vif, - cfg(priv)->ht_params->smps_mode); - - return 0; -} - -int iwlagn_set_pan_params(struct iwl_priv *priv) -{ - struct iwl_wipan_params_cmd cmd; - struct iwl_rxon_context *ctx_bss, *ctx_pan; - int slot0 = 300, slot1 = 0; - int ret; - - if (priv->shrd->valid_contexts == BIT(IWL_RXON_CTX_BSS)) - return 0; - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - - lockdep_assert_held(&priv->mutex); - - ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS]; - ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN]; - - /* - * If the PAN context is inactive, then we don't need - * to update the PAN parameters, the last thing we'll - * have done before it goes inactive is making the PAN - * parameters be WLAN-only. - */ - if (!ctx_pan->is_active) - return 0; - - memset(&cmd, 0, sizeof(cmd)); - - /* only 2 slots are currently allowed */ - cmd.num_slots = 2; - - cmd.slots[0].type = 0; /* BSS */ - cmd.slots[1].type = 1; /* PAN */ - - if (priv->hw_roc_setup) { - /* both contexts must be used for this to happen */ - slot1 = IWL_MIN_SLOT_TIME; - slot0 = 3000; - } else if (ctx_bss->vif && ctx_pan->vif) { - int bcnint = ctx_pan->beacon_int; - int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1; - - /* should be set, but seems unused?? */ - cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE); - - if (ctx_pan->vif->type == NL80211_IFTYPE_AP && - bcnint && - bcnint != ctx_bss->beacon_int) { - IWL_ERR(priv, - "beacon intervals don't match (%d, %d)\n", - ctx_bss->beacon_int, ctx_pan->beacon_int); - } else - bcnint = max_t(int, bcnint, - ctx_bss->beacon_int); - if (!bcnint) - bcnint = DEFAULT_BEACON_INTERVAL; - slot0 = bcnint / 2; - slot1 = bcnint - slot0; - - if (test_bit(STATUS_SCAN_HW, &priv->status) || - (!ctx_bss->vif->bss_conf.idle && - !ctx_bss->vif->bss_conf.assoc)) { - slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; - slot1 = IWL_MIN_SLOT_TIME; - } else if (!ctx_pan->vif->bss_conf.idle && - !ctx_pan->vif->bss_conf.assoc) { - slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; - slot0 = IWL_MIN_SLOT_TIME; - } - } else if (ctx_pan->vif) { - slot0 = 0; - slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) * - ctx_pan->beacon_int; - slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1); - - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME; - slot1 = IWL_MIN_SLOT_TIME; - } - } - - cmd.slots[0].width = cpu_to_le16(slot0); - cmd.slots[1].width = cpu_to_le16(slot1); - - ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, CMD_SYNC, - sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret); - - return ret; -} - -/** - * iwlagn_commit_rxon - commit staging_rxon to hardware - * - * The RXON command in staging_rxon is committed to the hardware and - * the active_rxon structure is updated with the new data. This - * function correctly transitions out of the RXON_ASSOC_MSK state if - * a HW tune is required based on the RXON structure changes. - * - * The connect/disconnect flow should be as the following: - * - * 1. make sure send RXON command with association bit unset if not connect - * this should include the channel and the band for the candidate - * to be connected to - * 2. Add Station before RXON association with the AP - * 3. RXON_timing has to send before RXON for connection - * 4. full RXON command - associated bit set - * 5. use RXON_ASSOC command to update any flags changes - */ -int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - /* cast away the const for active_rxon in this function */ - struct iwl_rxon_cmd *active = (void *)&ctx->active; - bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); - int ret; - - lockdep_assert_held(&priv->mutex); - - if (!iwl_is_alive(priv)) - return -EBUSY; - - /* This function hardcodes a bunch of dual-mode assumptions */ - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - - if (!ctx->is_active) - return 0; - - /* always get timestamp with Rx frame */ - ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; - - /* - * force CTS-to-self frames protection if RTS-CTS is not preferred - * one aggregation protection method - */ - if (!hw_params(priv).use_rts_for_aggregation) - ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; - - if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || - !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) - ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - iwl_print_rx_config_cmd(priv, ctx->ctxid); - ret = iwl_check_rxon_cmd(priv, ctx); - if (ret) { - IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); - return -EINVAL; - } - - /* - * receive commit_rxon request - * abort any previous channel switch if still in process - */ - if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && - (priv->switch_channel != ctx->staging.channel)) { - IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_channel)); - iwl_chswitch_done(priv, false); - } - - /* - * If we don't need to send a full RXON, we can use - * iwl_rxon_assoc_cmd which is used to reconfigure filter - * and other flags for the current radio configuration. - */ - if (!iwl_full_rxon_required(priv, ctx)) { - ret = iwlagn_send_rxon_assoc(priv, ctx); - if (ret) { - IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); - return ret; - } - - memcpy(active, &ctx->staging, sizeof(*active)); - /* - * We do not commit tx power settings while channel changing, - * do it now if after settings changed. - */ - iwl_set_tx_power(priv, priv->tx_power_next, false); - - /* make sure we are in the right PS state */ - iwl_power_update_mode(priv, true); - - return 0; - } - - iwl_set_rxon_hwcrypto(priv, ctx, !iwlagn_mod_params.sw_crypto); - - IWL_DEBUG_INFO(priv, - "Going to commit RXON\n" - " * with%s RXON_FILTER_ASSOC_MSK\n" - " * channel = %d\n" - " * bssid = %pM\n", - (new_assoc ? "" : "out"), - le16_to_cpu(ctx->staging.channel), - ctx->staging.bssid_addr); - - /* - * Always clear associated first, but with the correct config. - * This is required as for example station addition for the - * AP station must be done after the BSSID is set to correctly - * set up filters in the device. - */ - ret = iwlagn_rxon_disconn(priv, ctx); - if (ret) - return ret; - - ret = iwlagn_set_pan_params(priv); - if (ret) - return ret; - - if (new_assoc) - return iwlagn_rxon_connect(priv, ctx); - - return 0; -} - -void iwlagn_config_ht40(struct ieee80211_conf *conf, - struct iwl_rxon_context *ctx) -{ - if (conf_is_ht40_minus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_BELOW; - ctx->ht.is_40mhz = true; - } else if (conf_is_ht40_plus(conf)) { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_ABOVE; - ctx->ht.is_40mhz = true; - } else { - ctx->ht.extension_chan_offset = - IEEE80211_HT_PARAM_CHA_SEC_NONE; - ctx->ht.is_40mhz = false; - } -} - -int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = conf->channel; - const struct iwl_channel_info *ch_info; - int ret = 0; - - IWL_DEBUG_MAC80211(priv, "enter: changed %#x", changed); - - mutex_lock(&priv->mutex); - - if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) { - IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); - goto out; - } - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - goto out; - } - - if (changed & (IEEE80211_CONF_CHANGE_SMPS | - IEEE80211_CONF_CHANGE_CHANNEL)) { - /* mac80211 uses static for non-HT which is what we want */ - priv->current_ht_config.smps = conf->smps_mode; - - /* - * Recalculate chain counts. - * - * If monitor mode is enabled then mac80211 will - * set up the SM PS mode to OFF if an HT channel is - * configured. - */ - for_each_context(priv, ctx) - iwlagn_set_rxon_chain(priv, ctx); - } - - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - ch_info = iwl_get_channel_info(priv, channel->band, - channel->hw_value); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); - ret = -EINVAL; - goto out; - } - - for_each_context(priv, ctx) { - /* Configure HT40 channels */ - if (ctx->ht.enabled != conf_is_ht(conf)) - ctx->ht.enabled = conf_is_ht(conf); - - if (ctx->ht.enabled) { - /* if HT40 is used, it should not change - * after associated except channel switch */ - if (!ctx->ht.is_40mhz || - !iwl_is_associated_ctx(ctx)) - iwlagn_config_ht40(conf, ctx); - } else - ctx->ht.is_40mhz = false; - - /* - * Default to no protection. Protection mode will - * later be set from BSS config in iwl_ht_conf - */ - ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; - - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if (le16_to_cpu(ctx->staging.channel) != - channel->hw_value) - ctx->staging.flags = 0; - - iwl_set_rxon_channel(priv, channel, ctx); - iwl_set_rxon_ht(priv, &priv->current_ht_config); - - iwl_set_flags_for_band(priv, ctx, channel->band, - ctx->vif); - } - - iwl_update_bcast_stations(priv); - - /* - * The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists. - */ - iwl_set_rate(priv); - } - - if (changed & (IEEE80211_CONF_CHANGE_PS | - IEEE80211_CONF_CHANGE_IDLE)) { - ret = iwl_power_update_mode(priv, false); - if (ret) - IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); - } - - if (changed & IEEE80211_CONF_CHANGE_POWER) { - IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", - priv->tx_power_user_lmt, conf->power_level); - - iwl_set_tx_power(priv, conf->power_level, false); - } - - for_each_context(priv, ctx) { - if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) - continue; - iwlagn_commit_rxon(priv, ctx); - } - out: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static void iwlagn_check_needed_chains(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_bss_conf *bss_conf) -{ - struct ieee80211_vif *vif = ctx->vif; - struct iwl_rxon_context *tmp; - struct ieee80211_sta *sta; - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - struct ieee80211_sta_ht_cap *ht_cap; - bool need_multiple; - - lockdep_assert_held(&priv->mutex); - - switch (vif->type) { - case NL80211_IFTYPE_STATION: - rcu_read_lock(); - sta = ieee80211_find_sta(vif, bss_conf->bssid); - if (!sta) { - /* - * If at all, this can only happen through a race - * when the AP disconnects us while we're still - * setting up the connection, in that case mac80211 - * will soon tell us about that. - */ - need_multiple = false; - rcu_read_unlock(); - break; - } - - ht_cap = &sta->ht_cap; - - need_multiple = true; - - /* - * If the peer advertises no support for receiving 2 and 3 - * stream MCS rates, it can't be transmitting them either. - */ - if (ht_cap->mcs.rx_mask[1] == 0 && - ht_cap->mcs.rx_mask[2] == 0) { - need_multiple = false; - } else if (!(ht_cap->mcs.tx_params & - IEEE80211_HT_MCS_TX_DEFINED)) { - /* If it can't TX MCS at all ... */ - need_multiple = false; - } else if (ht_cap->mcs.tx_params & - IEEE80211_HT_MCS_TX_RX_DIFF) { - int maxstreams; - - /* - * But if it can receive them, it might still not - * be able to transmit them, which is what we need - * to check here -- so check the number of streams - * it advertises for TX (if different from RX). - */ - - maxstreams = (ht_cap->mcs.tx_params & - IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK); - maxstreams >>= - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; - maxstreams += 1; - - if (maxstreams <= 1) - need_multiple = false; - } - - rcu_read_unlock(); - break; - case NL80211_IFTYPE_ADHOC: - /* currently */ - need_multiple = false; - break; - default: - /* only AP really */ - need_multiple = true; - break; - } - - ctx->ht_need_multiple_chains = need_multiple; - - if (!need_multiple) { - /* check all contexts */ - for_each_context(priv, tmp) { - if (!tmp->vif) - continue; - if (tmp->ht_need_multiple_chains) { - need_multiple = true; - break; - } - } - } - - ht_conf->single_chain_sufficient = !need_multiple; -} - -static void iwlagn_chain_noise_reset(struct iwl_priv *priv) -{ - struct iwl_chain_noise_data *data = &priv->chain_noise_data; - int ret; - - if ((data->state == IWL_CHAIN_NOISE_ALIVE) && - iwl_is_any_associated(priv)) { - struct iwl_calib_chain_noise_reset_cmd cmd; - - /* clear data for chain noise calibration algorithm */ - data->chain_noise_a = 0; - data->chain_noise_b = 0; - data->chain_noise_c = 0; - data->chain_signal_a = 0; - data->chain_signal_b = 0; - data->chain_signal_c = 0; - data->beacon_count = 0; - - memset(&cmd, 0, sizeof(cmd)); - iwl_set_calib_hdr(&cmd.hdr, - priv->phy_calib_chain_noise_reset_cmd); - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_PHY_CALIBRATION_CMD, - CMD_SYNC, sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, - "Could not send REPLY_PHY_CALIBRATION_CMD\n"); - data->state = IWL_CHAIN_NOISE_ACCUMULATE; - IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); - } -} - -void iwlagn_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - int ret; - bool force = false; - - mutex_lock(&priv->mutex); - - if (unlikely(!iwl_is_ready(priv))) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - mutex_unlock(&priv->mutex); - return; - } - - if (unlikely(!ctx->vif)) { - IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n"); - mutex_unlock(&priv->mutex); - return; - } - - if (changes & BSS_CHANGED_BEACON_INT) - force = true; - - if (changes & BSS_CHANGED_QOS) { - ctx->qos_data.qos_active = bss_conf->qos; - iwlagn_update_qos(priv, ctx); - } - - ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); - if (vif->bss_conf.use_short_preamble) - ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - - if (changes & BSS_CHANGED_ASSOC) { - if (bss_conf->assoc) { - priv->timestamp = bss_conf->last_tsf; - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - } else { - /* - * If we disassociate while there are pending - * frames, just wake up the queues and let the - * frames "escape" ... This shouldn't really - * be happening to start with, but we should - * not get stuck in this case either since it - * can happen if userspace gets confused. - */ - iwlagn_lift_passive_no_rx(priv); - - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - if (ctx->ctxid == IWL_RXON_CTX_BSS) - priv->have_rekey_data = false; - } - - iwlagn_bt_coex_rssi_monitor(priv); - } - - if (ctx->ht.enabled) { - ctx->ht.protection = bss_conf->ht_operation_mode & - IEEE80211_HT_OP_MODE_PROTECTION; - ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode & - IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); - iwlagn_check_needed_chains(priv, ctx, bss_conf); - iwl_set_rxon_ht(priv, &priv->current_ht_config); - } - - iwlagn_set_rxon_chain(priv, ctx); - - if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) - ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; - - if (bss_conf->use_cts_prot) - ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; - else - ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN; - - memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); - - if (vif->type == NL80211_IFTYPE_AP || - vif->type == NL80211_IFTYPE_ADHOC) { - if (vif->bss_conf.enable_beacon) { - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - priv->beacon_ctx = ctx; - } else { - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - priv->beacon_ctx = NULL; - } - } - - /* - * If the ucode decides to do beacon filtering before - * association, it will lose beacons that are needed - * before sending frames out on passive channels. This - * causes association failures on those channels. Enable - * receiving beacons in such cases. - */ - - if (vif->type == NL80211_IFTYPE_STATION) { - if (!bss_conf->assoc) - ctx->staging.filter_flags |= RXON_FILTER_BCON_AWARE_MSK; - else - ctx->staging.filter_flags &= - ~RXON_FILTER_BCON_AWARE_MSK; - } - - if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) - iwlagn_commit_rxon(priv, ctx); - - if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) { - /* - * The chain noise calibration will enable PM upon - * completion. If calibration has already been run - * then we need to enable power management here. - */ - if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) - iwl_power_update_mode(priv, false); - - /* Enable RX differential gain and sensitivity calibrations */ - if (!priv->disable_chain_noise_cal) - iwlagn_chain_noise_reset(priv); - priv->start_calib = 1; - } - - if (changes & BSS_CHANGED_IBSS) { - ret = iwlagn_manage_ibss_station(priv, vif, - bss_conf->ibss_joined); - if (ret) - IWL_ERR(priv, "failed to %s IBSS station %pM\n", - bss_conf->ibss_joined ? "add" : "remove", - bss_conf->bssid); - } - - if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC && - priv->beacon_ctx) { - if (iwlagn_update_beacon(priv, vif)) - IWL_ERR(priv, "Error sending IBSS beacon\n"); - } - - mutex_unlock(&priv->mutex); -} - -void iwlagn_post_scan(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - /* - * We do not commit power settings while scan is pending, - * do it now if the settings changed. - */ - iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false); - iwl_set_tx_power(priv, priv->tx_power_next, false); - - /* - * Since setting the RXON may have been deferred while - * performing the scan, fire one off if needed - */ - for_each_context(priv, ctx) - if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) - iwlagn_commit_rxon(priv, ctx); - - iwlagn_set_pan_params(priv); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-sta.c deleted file mode 100644 index bef3f242..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-sta.c +++ /dev/null @@ -1,1456 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/etherdevice.h> -#include <net/mac80211.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-agn.h" -#include "iwl-trans.h" - -static int iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id) -{ - lockdep_assert_held(&priv->sta_lock); - - if (sta_id >= IWLAGN_STATION_COUNT) { - IWL_ERR(priv, "invalid sta_id %u", sta_id); - return -EINVAL; - } - if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) - IWL_ERR(priv, "ACTIVATE a non DRIVER active station id %u " - "addr %pM\n", - sta_id, priv->stations[sta_id].sta.sta.addr); - - if (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) { - IWL_DEBUG_ASSOC(priv, - "STA id %u addr %pM already present in uCode " - "(according to driver)\n", - sta_id, priv->stations[sta_id].sta.sta.addr); - } else { - priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE; - IWL_DEBUG_ASSOC(priv, "Added STA id %u addr %pM to uCode\n", - sta_id, priv->stations[sta_id].sta.sta.addr); - } - return 0; -} - -static int iwl_process_add_sta_resp(struct iwl_priv *priv, - struct iwl_addsta_cmd *addsta, - struct iwl_rx_packet *pkt) -{ - struct iwl_add_sta_resp *add_sta_resp = (void *)pkt->data; - u8 sta_id = addsta->sta.sta_id; - int ret = -EIO; - - if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n", - pkt->hdr.flags); - return ret; - } - - IWL_DEBUG_INFO(priv, "Processing response for adding station %u\n", - sta_id); - - spin_lock(&priv->sta_lock); - - switch (add_sta_resp->status) { - case ADD_STA_SUCCESS_MSK: - IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n"); - ret = iwl_sta_ucode_activate(priv, sta_id); - break; - case ADD_STA_NO_ROOM_IN_TABLE: - IWL_ERR(priv, "Adding station %d failed, no room in table.\n", - sta_id); - break; - case ADD_STA_NO_BLOCK_ACK_RESOURCE: - IWL_ERR(priv, "Adding station %d failed, no block ack " - "resource.\n", sta_id); - break; - case ADD_STA_MODIFY_NON_EXIST_STA: - IWL_ERR(priv, "Attempting to modify non-existing station %d\n", - sta_id); - break; - default: - IWL_DEBUG_ASSOC(priv, "Received REPLY_ADD_STA:(0x%08X)\n", - add_sta_resp->status); - break; - } - - IWL_DEBUG_INFO(priv, "%s station id %u addr %pM\n", - priv->stations[sta_id].sta.mode == - STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", - sta_id, priv->stations[sta_id].sta.sta.addr); - - /* - * XXX: The MAC address in the command buffer is often changed from - * the original sent to the device. That is, the MAC address - * written to the command buffer often is not the same MAC address - * read from the command buffer when the command returns. This - * issue has not yet been resolved and this debugging is left to - * observe the problem. - */ - IWL_DEBUG_INFO(priv, "%s station according to cmd buffer %pM\n", - priv->stations[sta_id].sta.mode == - STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", - addsta->sta.addr); - spin_unlock(&priv->sta_lock); - - return ret; -} - -int iwl_add_sta_callback(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_addsta_cmd *addsta = - (struct iwl_addsta_cmd *) cmd->payload; - - return iwl_process_add_sta_resp(priv, addsta, pkt); -} - -int iwl_send_add_sta(struct iwl_priv *priv, - struct iwl_addsta_cmd *sta, u8 flags) -{ - int ret = 0; - struct iwl_host_cmd cmd = { - .id = REPLY_ADD_STA, - .flags = flags, - .data = { sta, }, - .len = { sizeof(*sta), }, - }; - u8 sta_id __maybe_unused = sta->sta.sta_id; - - IWL_DEBUG_INFO(priv, "Adding sta %u (%pM) %ssynchronously\n", - sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : ""); - - if (!(flags & CMD_ASYNC)) { - cmd.flags |= CMD_WANT_SKB; - might_sleep(); - } - - ret = iwl_dvm_send_cmd(priv, &cmd); - - if (ret || (flags & CMD_ASYNC)) - return ret; - /*else the command was successfully sent in SYNC mode, need to free - * the reply page */ - - iwl_free_resp(&cmd); - - if (cmd.handler_status) - IWL_ERR(priv, "%s - error in the CMD response %d", __func__, - cmd.handler_status); - - return cmd.handler_status; -} - -static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, - struct ieee80211_sta *sta, - struct iwl_rxon_context *ctx, - __le32 *flags, __le32 *mask) -{ - struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; - u8 mimo_ps_mode; - - *mask = STA_FLG_RTS_MIMO_PROT_MSK | - STA_FLG_MIMO_DIS_MSK | - STA_FLG_HT40_EN_MSK | - STA_FLG_MAX_AGG_SIZE_MSK | - STA_FLG_AGG_MPDU_DENSITY_MSK; - *flags = 0; - - if (!sta || !sta_ht_inf->ht_supported) - return; - - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; - - IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n", - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? - "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? - "dynamic" : "disabled"); - - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: - *flags |= STA_FLG_MIMO_DIS_MSK; - break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: - *flags |= STA_FLG_RTS_MIMO_PROT_MSK; - break; - case WLAN_HT_CAP_SM_PS_DISABLED: - break; - default: - IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode); - break; - } - - *flags |= cpu_to_le32( - (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS); - - *flags |= cpu_to_le32( - (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); - - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) - *flags |= STA_FLG_HT40_EN_MSK; -} - -int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta *sta) -{ - u8 sta_id = iwl_sta_id(sta); - __le32 flags, mask; - struct iwl_addsta_cmd cmd; - - if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION)) - return -EINVAL; - - iwl_sta_calc_ht_flags(priv, sta, ctx, &flags, &mask); - - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].sta.station_flags &= ~mask; - priv->stations[sta_id].sta.station_flags |= flags; - spin_unlock_bh(&priv->sta_lock); - - memset(&cmd, 0, sizeof(cmd)); - cmd.mode = STA_CONTROL_MODIFY_MSK; - cmd.station_flags_msk = mask; - cmd.station_flags = flags; - cmd.sta.sta_id = sta_id; - - return iwl_send_add_sta(priv, &cmd, CMD_SYNC); -} - -static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, - struct ieee80211_sta *sta, - struct iwl_rxon_context *ctx) -{ - __le32 flags, mask; - - iwl_sta_calc_ht_flags(priv, sta, ctx, &flags, &mask); - - lockdep_assert_held(&priv->sta_lock); - priv->stations[index].sta.station_flags &= ~mask; - priv->stations[index].sta.station_flags |= flags; -} - -/** - * iwl_prep_station - Prepare station information for addition - * - * should be called with sta_lock held - */ -u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - const u8 *addr, bool is_ap, struct ieee80211_sta *sta) -{ - struct iwl_station_entry *station; - int i; - u8 sta_id = IWL_INVALID_STATION; - - if (is_ap) - sta_id = ctx->ap_sta_id; - else if (is_broadcast_ether_addr(addr)) - sta_id = ctx->bcast_sta_id; - else - for (i = IWL_STA_ID; i < IWLAGN_STATION_COUNT; i++) { - if (!compare_ether_addr(priv->stations[i].sta.sta.addr, - addr)) { - sta_id = i; - break; - } - - if (!priv->stations[i].used && - sta_id == IWL_INVALID_STATION) - sta_id = i; - } - - /* - * These two conditions have the same outcome, but keep them - * separate - */ - if (unlikely(sta_id == IWL_INVALID_STATION)) - return sta_id; - - /* - * uCode is not able to deal with multiple requests to add a - * station. Keep track if one is in progress so that we do not send - * another. - */ - if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) { - IWL_DEBUG_INFO(priv, "STA %d already in process of being " - "added.\n", sta_id); - return sta_id; - } - - if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) && - (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) && - !compare_ether_addr(priv->stations[sta_id].sta.sta.addr, addr)) { - IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not " - "adding again.\n", sta_id, addr); - return sta_id; - } - - station = &priv->stations[sta_id]; - station->used = IWL_STA_DRIVER_ACTIVE; - IWL_DEBUG_ASSOC(priv, "Add STA to driver ID %d: %pM\n", - sta_id, addr); - priv->num_stations++; - - /* Set up the REPLY_ADD_STA command to send to device */ - memset(&station->sta, 0, sizeof(struct iwl_addsta_cmd)); - memcpy(station->sta.sta.addr, addr, ETH_ALEN); - station->sta.mode = 0; - station->sta.sta.sta_id = sta_id; - station->sta.station_flags = ctx->station_flags; - station->ctxid = ctx->ctxid; - - if (sta) { - struct iwl_station_priv *sta_priv; - - sta_priv = (void *)sta->drv_priv; - sta_priv->ctx = ctx; - } - - /* - * OK to call unconditionally, since local stations (IBSS BSSID - * STA and broadcast STA) pass in a NULL sta, and mac80211 - * doesn't allow HT IBSS. - */ - iwl_set_ht_add_station(priv, sta_id, sta, ctx); - - return sta_id; - -} - -#define STA_WAIT_TIMEOUT (HZ/2) - -/** - * iwl_add_station_common - - */ -int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - const u8 *addr, bool is_ap, - struct ieee80211_sta *sta, u8 *sta_id_r) -{ - int ret = 0; - u8 sta_id; - struct iwl_addsta_cmd sta_cmd; - - *sta_id_r = 0; - spin_lock_bh(&priv->sta_lock); - sta_id = iwl_prep_station(priv, ctx, addr, is_ap, sta); - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Unable to prepare station %pM for addition\n", - addr); - spin_unlock_bh(&priv->sta_lock); - return -EINVAL; - } - - /* - * uCode is not able to deal with multiple requests to add a - * station. Keep track if one is in progress so that we do not send - * another. - */ - if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) { - IWL_DEBUG_INFO(priv, "STA %d already in process of being " - "added.\n", sta_id); - spin_unlock_bh(&priv->sta_lock); - return -EEXIST; - } - - if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) && - (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) { - IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not " - "adding again.\n", sta_id, addr); - spin_unlock_bh(&priv->sta_lock); - return -EEXIST; - } - - priv->stations[sta_id].used |= IWL_STA_UCODE_INPROGRESS; - memcpy(&sta_cmd, &priv->stations[sta_id].sta, - sizeof(struct iwl_addsta_cmd)); - spin_unlock_bh(&priv->sta_lock); - - /* Add station to device's station table */ - ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); - if (ret) { - spin_lock_bh(&priv->sta_lock); - IWL_ERR(priv, "Adding station %pM failed.\n", - priv->stations[sta_id].sta.sta.addr); - priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; - priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; - spin_unlock_bh(&priv->sta_lock); - } - *sta_id_r = sta_id; - return ret; -} - -/** - * iwl_sta_ucode_deactivate - deactivate ucode status for a station - */ -static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, u8 sta_id) -{ - lockdep_assert_held(&priv->sta_lock); - - /* Ucode must be active and driver must be non active */ - if ((priv->stations[sta_id].used & - (IWL_STA_UCODE_ACTIVE | IWL_STA_DRIVER_ACTIVE)) != - IWL_STA_UCODE_ACTIVE) - IWL_ERR(priv, "removed non active STA %u\n", sta_id); - - priv->stations[sta_id].used &= ~IWL_STA_UCODE_ACTIVE; - - memset(&priv->stations[sta_id], 0, sizeof(struct iwl_station_entry)); - IWL_DEBUG_ASSOC(priv, "Removed STA %u\n", sta_id); -} - -static int iwl_send_remove_station(struct iwl_priv *priv, - const u8 *addr, int sta_id, - bool temporary) -{ - struct iwl_rx_packet *pkt; - int ret; - struct iwl_rem_sta_cmd rm_sta_cmd; - - struct iwl_host_cmd cmd = { - .id = REPLY_REMOVE_STA, - .len = { sizeof(struct iwl_rem_sta_cmd), }, - .flags = CMD_SYNC, - .data = { &rm_sta_cmd, }, - }; - - memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd)); - rm_sta_cmd.num_sta = 1; - memcpy(&rm_sta_cmd.addr, addr, ETH_ALEN); - - cmd.flags |= CMD_WANT_SKB; - - ret = iwl_dvm_send_cmd(priv, &cmd); - - if (ret) - return ret; - - pkt = cmd.resp_pkt; - if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) { - IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n", - pkt->hdr.flags); - ret = -EIO; - } - - if (!ret) { - struct iwl_rem_sta_resp *rem_sta_resp = (void *)pkt->data; - switch (rem_sta_resp->status) { - case REM_STA_SUCCESS_MSK: - if (!temporary) { - spin_lock_bh(&priv->sta_lock); - iwl_sta_ucode_deactivate(priv, sta_id); - spin_unlock_bh(&priv->sta_lock); - } - IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n"); - break; - default: - ret = -EIO; - IWL_ERR(priv, "REPLY_REMOVE_STA failed\n"); - break; - } - } - iwl_free_resp(&cmd); - - return ret; -} - -/** - * iwl_remove_station - Remove driver's knowledge of station. - */ -int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id, - const u8 *addr) -{ - u8 tid; - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_INFO(priv, - "Unable to remove station %pM, device not ready.\n", - addr); - /* - * It is typical for stations to be removed when we are - * going down. Return success since device will be down - * soon anyway - */ - return 0; - } - - IWL_DEBUG_ASSOC(priv, "Removing STA from driver:%d %pM\n", - sta_id, addr); - - if (WARN_ON(sta_id == IWL_INVALID_STATION)) - return -EINVAL; - - spin_lock_bh(&priv->sta_lock); - - if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) { - IWL_DEBUG_INFO(priv, "Removing %pM but non DRIVER active\n", - addr); - goto out_err; - } - - if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) { - IWL_DEBUG_INFO(priv, "Removing %pM but non UCODE active\n", - addr); - goto out_err; - } - - if (priv->stations[sta_id].used & IWL_STA_LOCAL) { - kfree(priv->stations[sta_id].lq); - priv->stations[sta_id].lq = NULL; - } - - for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) - memset(&priv->tid_data[sta_id][tid], 0, - sizeof(priv->tid_data[sta_id][tid])); - - priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; - - priv->num_stations--; - - if (WARN_ON(priv->num_stations < 0)) - priv->num_stations = 0; - - spin_unlock_bh(&priv->sta_lock); - - return iwl_send_remove_station(priv, addr, sta_id, false); -out_err: - spin_unlock_bh(&priv->sta_lock); - return -EINVAL; -} - -void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id, - const u8 *addr) -{ - u8 tid; - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_INFO(priv, - "Unable to remove station %pM, device not ready.\n", - addr); - return; - } - - IWL_DEBUG_ASSOC(priv, "Deactivating STA: %pM (%d)\n", addr, sta_id); - - if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION)) - return; - - spin_lock_bh(&priv->sta_lock); - - WARN_ON_ONCE(!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)); - - for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++) - memset(&priv->tid_data[sta_id][tid], 0, - sizeof(priv->tid_data[sta_id][tid])); - - priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE; - - priv->num_stations--; - - if (WARN_ON_ONCE(priv->num_stations < 0)) - priv->num_stations = 0; - - spin_unlock_bh(&priv->sta_lock); -} - -/** - * iwl_clear_ucode_stations - clear ucode station table bits - * - * This function clears all the bits in the driver indicating - * which stations are active in the ucode. Call when something - * other than explicit station management would cause this in - * the ucode, e.g. unassociated RXON. - */ -void iwl_clear_ucode_stations(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - int i; - bool cleared = false; - - IWL_DEBUG_INFO(priv, "Clearing ucode stations in driver\n"); - - spin_lock_bh(&priv->sta_lock); - for (i = 0; i < IWLAGN_STATION_COUNT; i++) { - if (ctx && ctx->ctxid != priv->stations[i].ctxid) - continue; - - if (priv->stations[i].used & IWL_STA_UCODE_ACTIVE) { - IWL_DEBUG_INFO(priv, - "Clearing ucode active for station %d\n", i); - priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE; - cleared = true; - } - } - spin_unlock_bh(&priv->sta_lock); - - if (!cleared) - IWL_DEBUG_INFO(priv, - "No active stations found to be cleared\n"); -} - -/** - * iwl_restore_stations() - Restore driver known stations to device - * - * All stations considered active by driver, but not present in ucode, is - * restored. - * - * Function sleeps. - */ -void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - struct iwl_addsta_cmd sta_cmd; - struct iwl_link_quality_cmd lq; - int i; - bool found = false; - int ret; - bool send_lq; - - if (!iwl_is_ready(priv)) { - IWL_DEBUG_INFO(priv, - "Not ready yet, not restoring any stations.\n"); - return; - } - - IWL_DEBUG_ASSOC(priv, "Restoring all known stations ... start.\n"); - spin_lock_bh(&priv->sta_lock); - for (i = 0; i < IWLAGN_STATION_COUNT; i++) { - if (ctx->ctxid != priv->stations[i].ctxid) - continue; - if ((priv->stations[i].used & IWL_STA_DRIVER_ACTIVE) && - !(priv->stations[i].used & IWL_STA_UCODE_ACTIVE)) { - IWL_DEBUG_ASSOC(priv, "Restoring sta %pM\n", - priv->stations[i].sta.sta.addr); - priv->stations[i].sta.mode = 0; - priv->stations[i].used |= IWL_STA_UCODE_INPROGRESS; - found = true; - } - } - - for (i = 0; i < IWLAGN_STATION_COUNT; i++) { - if ((priv->stations[i].used & IWL_STA_UCODE_INPROGRESS)) { - memcpy(&sta_cmd, &priv->stations[i].sta, - sizeof(struct iwl_addsta_cmd)); - send_lq = false; - if (priv->stations[i].lq) { - if (priv->wowlan) - iwl_sta_fill_lq(priv, ctx, i, &lq); - else - memcpy(&lq, priv->stations[i].lq, - sizeof(struct iwl_link_quality_cmd)); - send_lq = true; - } - spin_unlock_bh(&priv->sta_lock); - ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); - if (ret) { - spin_lock_bh(&priv->sta_lock); - IWL_ERR(priv, "Adding station %pM failed.\n", - priv->stations[i].sta.sta.addr); - priv->stations[i].used &= - ~IWL_STA_DRIVER_ACTIVE; - priv->stations[i].used &= - ~IWL_STA_UCODE_INPROGRESS; - spin_unlock_bh(&priv->sta_lock); - } - /* - * Rate scaling has already been initialized, send - * current LQ command - */ - if (send_lq) - iwl_send_lq_cmd(priv, ctx, &lq, - CMD_SYNC, true); - spin_lock_bh(&priv->sta_lock); - priv->stations[i].used &= ~IWL_STA_UCODE_INPROGRESS; - } - } - - spin_unlock_bh(&priv->sta_lock); - if (!found) - IWL_DEBUG_INFO(priv, "Restoring all known stations .... " - "no stations to be restored.\n"); - else - IWL_DEBUG_INFO(priv, "Restoring all known stations .... " - "complete.\n"); -} - -int iwl_get_free_ucode_key_offset(struct iwl_priv *priv) -{ - int i; - - for (i = 0; i < priv->sta_key_max_num; i++) - if (!test_and_set_bit(i, &priv->ucode_key_table)) - return i; - - return WEP_INVALID_OFFSET; -} - -void iwl_dealloc_bcast_stations(struct iwl_priv *priv) -{ - int i; - - spin_lock_bh(&priv->sta_lock); - for (i = 0; i < IWLAGN_STATION_COUNT; i++) { - if (!(priv->stations[i].used & IWL_STA_BCAST)) - continue; - - priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE; - priv->num_stations--; - if (WARN_ON(priv->num_stations < 0)) - priv->num_stations = 0; - kfree(priv->stations[i].lq); - priv->stations[i].lq = NULL; - } - spin_unlock_bh(&priv->sta_lock); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -static void iwl_dump_lq_cmd(struct iwl_priv *priv, - struct iwl_link_quality_cmd *lq) -{ - int i; - IWL_DEBUG_RATE(priv, "lq station id 0x%x\n", lq->sta_id); - IWL_DEBUG_RATE(priv, "lq ant 0x%X 0x%X\n", - lq->general_params.single_stream_ant_msk, - lq->general_params.dual_stream_ant_msk); - - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) - IWL_DEBUG_RATE(priv, "lq index %d 0x%X\n", - i, lq->rs_table[i].rate_n_flags); -} -#else -static inline void iwl_dump_lq_cmd(struct iwl_priv *priv, - struct iwl_link_quality_cmd *lq) -{ -} -#endif - -/** - * is_lq_table_valid() - Test one aspect of LQ cmd for validity - * - * It sometimes happens when a HT rate has been in use and we - * loose connectivity with AP then mac80211 will first tell us that the - * current channel is not HT anymore before removing the station. In such a - * scenario the RXON flags will be updated to indicate we are not - * communicating HT anymore, but the LQ command may still contain HT rates. - * Test for this to prevent driver from sending LQ command between the time - * RXON flags are updated and when LQ command is updated. - */ -static bool is_lq_table_valid(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct iwl_link_quality_cmd *lq) -{ - int i; - - if (ctx->ht.enabled) - return true; - - IWL_DEBUG_INFO(priv, "Channel %u is not an HT channel\n", - ctx->active.channel); - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { - if (le32_to_cpu(lq->rs_table[i].rate_n_flags) & - RATE_MCS_HT_MSK) { - IWL_DEBUG_INFO(priv, - "index %d of LQ expects HT channel\n", - i); - return false; - } - } - return true; -} - -/** - * iwl_send_lq_cmd() - Send link quality command - * @init: This command is sent as part of station initialization right - * after station has been added. - * - * The link quality command is sent as the last step of station creation. - * This is the special case in which init is set and we call a callback in - * this case to clear the state indicating that station creation is in - * progress. - */ -int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct iwl_link_quality_cmd *lq, u8 flags, bool init) -{ - int ret = 0; - struct iwl_host_cmd cmd = { - .id = REPLY_TX_LINK_QUALITY_CMD, - .len = { sizeof(struct iwl_link_quality_cmd), }, - .flags = flags, - .data = { lq, }, - }; - - if (WARN_ON(lq->sta_id == IWL_INVALID_STATION)) - return -EINVAL; - - - spin_lock_bh(&priv->sta_lock); - if (!(priv->stations[lq->sta_id].used & IWL_STA_DRIVER_ACTIVE)) { - spin_unlock_bh(&priv->sta_lock); - return -EINVAL; - } - spin_unlock_bh(&priv->sta_lock); - - iwl_dump_lq_cmd(priv, lq); - if (WARN_ON(init && (cmd.flags & CMD_ASYNC))) - return -EINVAL; - - if (is_lq_table_valid(priv, ctx, lq)) - ret = iwl_dvm_send_cmd(priv, &cmd); - else - ret = -EINVAL; - - if (cmd.flags & CMD_ASYNC) - return ret; - - if (init) { - IWL_DEBUG_INFO(priv, "init LQ command complete, " - "clearing sta addition status for sta %d\n", - lq->sta_id); - spin_lock_bh(&priv->sta_lock); - priv->stations[lq->sta_id].used &= ~IWL_STA_UCODE_INPROGRESS; - spin_unlock_bh(&priv->sta_lock); - } - return ret; -} - - -void iwl_sta_fill_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - u8 sta_id, struct iwl_link_quality_cmd *link_cmd) -{ - int i, r; - u32 rate_flags = 0; - __le32 rate_n_flags; - - lockdep_assert_held(&priv->mutex); - - memset(link_cmd, 0, sizeof(*link_cmd)); - - /* Set up the rate scaling to start at selected rate, fall back - * all the way down to 1M in IEEE order, and then spin on 1M */ - if (priv->band == IEEE80211_BAND_5GHZ) - r = IWL_RATE_6M_INDEX; - else if (ctx && ctx->vif && ctx->vif->p2p) - r = IWL_RATE_6M_INDEX; - else - r = IWL_RATE_1M_INDEX; - - if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - rate_flags |= first_antenna(hw_params(priv).valid_tx_ant) << - RATE_MCS_ANT_POS; - rate_n_flags = iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags); - for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) - link_cmd->rs_table[i].rate_n_flags = rate_n_flags; - - link_cmd->general_params.single_stream_ant_msk = - first_antenna(hw_params(priv).valid_tx_ant); - - link_cmd->general_params.dual_stream_ant_msk = - hw_params(priv).valid_tx_ant & - ~first_antenna(hw_params(priv).valid_tx_ant); - if (!link_cmd->general_params.dual_stream_ant_msk) { - link_cmd->general_params.dual_stream_ant_msk = ANT_AB; - } else if (num_of_ant(hw_params(priv).valid_tx_ant) == 2) { - link_cmd->general_params.dual_stream_ant_msk = - hw_params(priv).valid_tx_ant; - } - - link_cmd->agg_params.agg_dis_start_th = - LINK_QUAL_AGG_DISABLE_START_DEF; - link_cmd->agg_params.agg_time_limit = - cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); - - link_cmd->sta_id = sta_id; -} - -static struct iwl_link_quality_cmd * -iwl_sta_alloc_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - u8 sta_id) -{ - struct iwl_link_quality_cmd *link_cmd; - - link_cmd = kzalloc(sizeof(struct iwl_link_quality_cmd), GFP_KERNEL); - if (!link_cmd) { - IWL_ERR(priv, "Unable to allocate memory for LQ cmd.\n"); - return NULL; - } - - iwl_sta_fill_lq(priv, ctx, sta_id, link_cmd); - - return link_cmd; -} - -/* - * iwlagn_add_bssid_station - Add the special IBSS BSSID station - * - * Function sleeps. - */ -int iwlagn_add_bssid_station(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - const u8 *addr, u8 *sta_id_r) -{ - int ret; - u8 sta_id; - struct iwl_link_quality_cmd *link_cmd; - - if (sta_id_r) - *sta_id_r = IWL_INVALID_STATION; - - ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM\n", addr); - return ret; - } - - if (sta_id_r) - *sta_id_r = sta_id; - - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].used |= IWL_STA_LOCAL; - spin_unlock_bh(&priv->sta_lock); - - /* Set up default rate scaling table in device's station table */ - link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id); - if (!link_cmd) { - IWL_ERR(priv, - "Unable to initialize rate scaling for station %pM.\n", - addr); - return -ENOMEM; - } - - ret = iwl_send_lq_cmd(priv, ctx, link_cmd, CMD_SYNC, true); - if (ret) - IWL_ERR(priv, "Link quality command failed (%d)\n", ret); - - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].lq = link_cmd; - spin_unlock_bh(&priv->sta_lock); - - return 0; -} - -/* - * static WEP keys - * - * For each context, the device has a table of 4 static WEP keys - * (one for each key index) that is updated with the following - * commands. - */ - -static int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - bool send_if_empty) -{ - int i, not_empty = 0; - u8 buff[sizeof(struct iwl_wep_cmd) + - sizeof(struct iwl_wep_key) * WEP_KEYS_MAX]; - struct iwl_wep_cmd *wep_cmd = (struct iwl_wep_cmd *)buff; - size_t cmd_size = sizeof(struct iwl_wep_cmd); - struct iwl_host_cmd cmd = { - .id = ctx->wep_key_cmd, - .data = { wep_cmd, }, - .flags = CMD_SYNC, - }; - - might_sleep(); - - memset(wep_cmd, 0, cmd_size + - (sizeof(struct iwl_wep_key) * WEP_KEYS_MAX)); - - for (i = 0; i < WEP_KEYS_MAX ; i++) { - wep_cmd->key[i].key_index = i; - if (ctx->wep_keys[i].key_size) { - wep_cmd->key[i].key_offset = i; - not_empty = 1; - } else { - wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET; - } - - wep_cmd->key[i].key_size = ctx->wep_keys[i].key_size; - memcpy(&wep_cmd->key[i].key[3], ctx->wep_keys[i].key, - ctx->wep_keys[i].key_size); - } - - wep_cmd->global_key_type = WEP_KEY_WEP_TYPE; - wep_cmd->num_keys = WEP_KEYS_MAX; - - cmd_size += sizeof(struct iwl_wep_key) * WEP_KEYS_MAX; - - cmd.len[0] = cmd_size; - - if (not_empty || send_if_empty) - return iwl_dvm_send_cmd(priv, &cmd); - else - return 0; -} - -int iwl_restore_default_wep_keys(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - lockdep_assert_held(&priv->mutex); - - return iwl_send_static_wepkey_cmd(priv, ctx, false); -} - -int iwl_remove_default_wep_key(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *keyconf) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n", - keyconf->keyidx); - - memset(&ctx->wep_keys[keyconf->keyidx], 0, sizeof(ctx->wep_keys[0])); - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_WEP(priv, - "Not sending REPLY_WEPKEY command due to RFKILL.\n"); - /* but keys in device are clear anyway so return success */ - return 0; - } - ret = iwl_send_static_wepkey_cmd(priv, ctx, 1); - IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n", - keyconf->keyidx, ret); - - return ret; -} - -int iwl_set_default_wep_key(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *keyconf) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - if (keyconf->keylen != WEP_KEY_LEN_128 && - keyconf->keylen != WEP_KEY_LEN_64) { - IWL_DEBUG_WEP(priv, - "Bad WEP key length %d\n", keyconf->keylen); - return -EINVAL; - } - - keyconf->hw_key_idx = IWLAGN_HW_KEY_DEFAULT; - - ctx->wep_keys[keyconf->keyidx].key_size = keyconf->keylen; - memcpy(&ctx->wep_keys[keyconf->keyidx].key, &keyconf->key, - keyconf->keylen); - - ret = iwl_send_static_wepkey_cmd(priv, ctx, false); - IWL_DEBUG_WEP(priv, "Set default WEP key: len=%d idx=%d ret=%d\n", - keyconf->keylen, keyconf->keyidx, ret); - - return ret; -} - -/* - * dynamic (per-station) keys - * - * The dynamic keys are a little more complicated. The device has - * a key cache of up to STA_KEY_MAX_NUM/STA_KEY_MAX_NUM_PAN keys. - * These are linked to stations by a table that contains an index - * into the key table for each station/key index/{mcast,unicast}, - * i.e. it's basically an array of pointers like this: - * key_offset_t key_mapping[NUM_STATIONS][4][2]; - * (it really works differently, but you can think of it as such) - * - * The key uploading and linking happens in the same command, the - * add station command with STA_MODIFY_KEY_MASK. - */ - -static u8 iwlagn_key_sta_id(struct iwl_priv *priv, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - - if (sta) - return iwl_sta_id(sta); - - /* - * The device expects GTKs for station interfaces to be - * installed as GTKs for the AP station. If we have no - * station ID, then use the ap_sta_id in that case. - */ - if (vif->type == NL80211_IFTYPE_STATION && vif_priv->ctx) - return vif_priv->ctx->ap_sta_id; - - return IWL_INVALID_STATION; -} - -static int iwlagn_send_sta_key(struct iwl_priv *priv, - struct ieee80211_key_conf *keyconf, - u8 sta_id, u32 tkip_iv32, u16 *tkip_p1k, - u32 cmd_flags) -{ - __le16 key_flags; - struct iwl_addsta_cmd sta_cmd; - int i; - - spin_lock_bh(&priv->sta_lock); - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd)); - spin_unlock_bh(&priv->sta_lock); - - key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags |= STA_KEY_FLG_MAP_KEY_MSK; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - key_flags |= STA_KEY_FLG_CCMP; - memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen); - break; - case WLAN_CIPHER_SUITE_TKIP: - key_flags |= STA_KEY_FLG_TKIP; - sta_cmd.key.tkip_rx_tsc_byte2 = tkip_iv32; - for (i = 0; i < 5; i++) - sta_cmd.key.tkip_rx_ttak[i] = cpu_to_le16(tkip_p1k[i]); - memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen); - break; - case WLAN_CIPHER_SUITE_WEP104: - key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; - /* fall through */ - case WLAN_CIPHER_SUITE_WEP40: - key_flags |= STA_KEY_FLG_WEP; - memcpy(&sta_cmd.key.key[3], keyconf->key, keyconf->keylen); - break; - default: - WARN_ON(1); - return -EINVAL; - } - - if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) - key_flags |= STA_KEY_MULTICAST_MSK; - - /* key pointer (offset) */ - sta_cmd.key.key_offset = keyconf->hw_key_idx; - - sta_cmd.key.key_flags = key_flags; - sta_cmd.mode = STA_CONTROL_MODIFY_MSK; - sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; - - return iwl_send_add_sta(priv, &sta_cmd, cmd_flags); -} - -void iwl_update_tkip_key(struct iwl_priv *priv, - struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, u32 iv32, u16 *phase1key) -{ - u8 sta_id = iwlagn_key_sta_id(priv, vif, sta); - - if (sta_id == IWL_INVALID_STATION) - return; - - if (iwl_scan_cancel(priv)) { - /* cancel scan failed, just live w/ bad key and rely - briefly on SW decryption */ - return; - } - - iwlagn_send_sta_key(priv, keyconf, sta_id, - iv32, phase1key, CMD_ASYNC); -} - -int iwl_remove_dynamic_key(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta) -{ - struct iwl_addsta_cmd sta_cmd; - u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); - __le16 key_flags; - - /* if station isn't there, neither is the key */ - if (sta_id == IWL_INVALID_STATION) - return -ENOENT; - - spin_lock_bh(&priv->sta_lock); - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd)); - if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) - sta_id = IWL_INVALID_STATION; - spin_unlock_bh(&priv->sta_lock); - - if (sta_id == IWL_INVALID_STATION) - return 0; - - lockdep_assert_held(&priv->mutex); - - ctx->key_mapping_keys--; - - IWL_DEBUG_WEP(priv, "Remove dynamic key: idx=%d sta=%d\n", - keyconf->keyidx, sta_id); - - if (!test_and_clear_bit(keyconf->hw_key_idx, &priv->ucode_key_table)) - IWL_ERR(priv, "offset %d not used in uCode key table.\n", - keyconf->hw_key_idx); - - key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC | - STA_KEY_FLG_INVALID; - - if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE)) - key_flags |= STA_KEY_MULTICAST_MSK; - - sta_cmd.key.key_flags = key_flags; - sta_cmd.key.key_offset = keyconf->hw_key_idx; - sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK; - sta_cmd.mode = STA_CONTROL_MODIFY_MSK; - - return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); -} - -int iwl_set_dynamic_key(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta) -{ - struct ieee80211_key_seq seq; - u16 p1k[5]; - int ret; - u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta); - const u8 *addr; - - if (sta_id == IWL_INVALID_STATION) - return -EINVAL; - - lockdep_assert_held(&priv->mutex); - - keyconf->hw_key_idx = iwl_get_free_ucode_key_offset(priv); - if (keyconf->hw_key_idx == WEP_INVALID_OFFSET) - return -ENOSPC; - - ctx->key_mapping_keys++; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_TKIP: - if (sta) - addr = sta->addr; - else /* station mode case only */ - addr = ctx->active.bssid_addr; - - /* pre-fill phase 1 key into device cache */ - ieee80211_get_key_rx_seq(keyconf, 0, &seq); - ieee80211_get_tkip_rx_p1k(keyconf, addr, seq.tkip.iv32, p1k); - ret = iwlagn_send_sta_key(priv, keyconf, sta_id, - seq.tkip.iv32, p1k, CMD_SYNC); - break; - case WLAN_CIPHER_SUITE_CCMP: - case WLAN_CIPHER_SUITE_WEP40: - case WLAN_CIPHER_SUITE_WEP104: - ret = iwlagn_send_sta_key(priv, keyconf, sta_id, - 0, NULL, CMD_SYNC); - break; - default: - IWL_ERR(priv, "Unknown cipher %x\n", keyconf->cipher); - ret = -EINVAL; - } - - if (ret) { - ctx->key_mapping_keys--; - clear_bit(keyconf->hw_key_idx, &priv->ucode_key_table); - } - - IWL_DEBUG_WEP(priv, "Set dynamic key: cipher=%x len=%d idx=%d sta=%pM ret=%d\n", - keyconf->cipher, keyconf->keylen, keyconf->keyidx, - sta ? sta->addr : NULL, ret); - - return ret; -} - -/** - * iwlagn_alloc_bcast_station - add broadcast station into driver's station table. - * - * This adds the broadcast station into the driver's station table - * and marks it driver active, so that it will be restored to the - * device at the next best time. - */ -int iwlagn_alloc_bcast_station(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - struct iwl_link_quality_cmd *link_cmd; - u8 sta_id; - - spin_lock_bh(&priv->sta_lock); - sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL); - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Unable to prepare broadcast station\n"); - spin_unlock_bh(&priv->sta_lock); - - return -EINVAL; - } - - priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE; - priv->stations[sta_id].used |= IWL_STA_BCAST; - spin_unlock_bh(&priv->sta_lock); - - link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id); - if (!link_cmd) { - IWL_ERR(priv, - "Unable to initialize rate scaling for bcast station.\n"); - return -ENOMEM; - } - - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].lq = link_cmd; - spin_unlock_bh(&priv->sta_lock); - - return 0; -} - -/** - * iwl_update_bcast_station - update broadcast station's LQ command - * - * Only used by iwlagn. Placed here to have all bcast station management - * code together. - */ -int iwl_update_bcast_station(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - struct iwl_link_quality_cmd *link_cmd; - u8 sta_id = ctx->bcast_sta_id; - - link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id); - if (!link_cmd) { - IWL_ERR(priv, "Unable to initialize rate scaling for bcast station.\n"); - return -ENOMEM; - } - - spin_lock_bh(&priv->sta_lock); - if (priv->stations[sta_id].lq) - kfree(priv->stations[sta_id].lq); - else - IWL_DEBUG_INFO(priv, "Bcast station rate scaling has not been initialized yet.\n"); - priv->stations[sta_id].lq = link_cmd; - spin_unlock_bh(&priv->sta_lock); - - return 0; -} - -int iwl_update_bcast_stations(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - int ret = 0; - - for_each_context(priv, ctx) { - ret = iwl_update_bcast_station(priv, ctx); - if (ret) - break; - } - - return ret; -} - -/** - * iwl_sta_tx_modify_enable_tid - Enable Tx for this TID in station table - */ -int iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid) -{ - struct iwl_addsta_cmd sta_cmd; - - lockdep_assert_held(&priv->mutex); - - /* Remove "disable" flag, to enable Tx for this TID */ - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX; - priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid)); - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); - spin_unlock_bh(&priv->sta_lock); - - return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); -} - -int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta, - int tid, u16 ssn) -{ - int sta_id; - struct iwl_addsta_cmd sta_cmd; - - lockdep_assert_held(&priv->mutex); - - sta_id = iwl_sta_id(sta); - if (sta_id == IWL_INVALID_STATION) - return -ENXIO; - - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].sta.station_flags_msk = 0; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK; - priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid; - priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn); - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); - spin_unlock_bh(&priv->sta_lock); - - return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); -} - -int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta, - int tid) -{ - int sta_id; - struct iwl_addsta_cmd sta_cmd; - - lockdep_assert_held(&priv->mutex); - - sta_id = iwl_sta_id(sta); - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); - return -ENXIO; - } - - spin_lock_bh(&priv->sta_lock); - priv->stations[sta_id].sta.station_flags_msk = 0; - priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK; - priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid; - priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; - memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd)); - spin_unlock_bh(&priv->sta_lock); - - return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC); -} - - - -void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt) -{ - struct iwl_addsta_cmd cmd = { - .mode = STA_CONTROL_MODIFY_MSK, - .station_flags = STA_FLG_PWR_SAVE_MSK, - .station_flags_msk = STA_FLG_PWR_SAVE_MSK, - .sta.sta_id = sta_id, - .sta.modify_mask = STA_MODIFY_SLEEP_TX_COUNT_MSK, - .sleep_tx_count = cpu_to_le16(cnt), - }; - - iwl_send_add_sta(priv, &cmd, CMD_ASYNC); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tt.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tt.c deleted file mode 100644 index baaf5ba2..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tt.c +++ /dev/null @@ -1,696 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include <net/mac80211.h> - -#include "iwl-agn.h" -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-commands.h" -#include "iwl-debug.h" -#include "iwl-agn-tt.h" - -/* default Thermal Throttling transaction table - * Current state | Throttling Down | Throttling Up - *============================================================================= - * Condition Nxt State Condition Nxt State Condition Nxt State - *----------------------------------------------------------------------------- - * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A - * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0 - * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1 - * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0 - *============================================================================= - */ -static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = { - {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104}, - {IWL_TI_1, 105, CT_KILL_THRESHOLD - 1}, - {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX} -}; -static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = { - {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95}, - {IWL_TI_2, 110, CT_KILL_THRESHOLD - 1}, - {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX} -}; -static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = { - {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100}, - {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}, - {IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX} -}; -static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = { - {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD}, - {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}, - {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX} -}; - -/* Advance Thermal Throttling default restriction table */ -static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = { - {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true }, - {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true }, - {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false }, - {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false } -}; - -bool iwl_tt_is_low_power_state(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - - if (tt->state >= IWL_TI_1) - return true; - return false; -} - -u8 iwl_tt_current_power_mode(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - - return tt->tt_power_mode; -} - -bool iwl_ht_enabled(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - struct iwl_tt_restriction *restriction; - - if (!priv->thermal_throttle.advanced_tt) - return true; - restriction = tt->restriction + tt->state; - return restriction->is_ht; -} - -static bool iwl_within_ct_kill_margin(struct iwl_priv *priv) -{ - s32 temp = priv->temperature; /* degrees CELSIUS except specified */ - bool within_margin = false; - - if (!priv->thermal_throttle.advanced_tt) - within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >= - CT_KILL_THRESHOLD_LEGACY) ? true : false; - else - within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >= - CT_KILL_THRESHOLD) ? true : false; - return within_margin; -} - -bool iwl_check_for_ct_kill(struct iwl_priv *priv) -{ - bool is_ct_kill = false; - - if (iwl_within_ct_kill_margin(priv)) { - iwl_tt_enter_ct_kill(priv); - is_ct_kill = true; - } - return is_ct_kill; -} - -enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - struct iwl_tt_restriction *restriction; - - if (!priv->thermal_throttle.advanced_tt) - return IWL_ANT_OK_MULTI; - restriction = tt->restriction + tt->state; - return restriction->tx_stream; -} - -enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - struct iwl_tt_restriction *restriction; - - if (!priv->thermal_throttle.advanced_tt) - return IWL_ANT_OK_MULTI; - restriction = tt->restriction + tt->state; - return restriction->rx_stream; -} - -#define CT_KILL_EXIT_DURATION (5) /* 5 seconds duration */ -#define CT_KILL_WAITING_DURATION (300) /* 300ms duration */ - -/* - * toggle the bit to wake up uCode and check the temperature - * if the temperature is below CT, uCode will stay awake and send card - * state notification with CT_KILL bit clear to inform Thermal Throttling - * Management to change state. Otherwise, uCode will go back to sleep - * without doing anything, driver should continue the 5 seconds timer - * to wake up uCode for temperature check until temperature drop below CT - */ -static void iwl_tt_check_exit_ct_kill(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - unsigned long flags; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (tt->state == IWL_TI_CT_KILL) { - if (priv->thermal_throttle.ct_kill_toggle) { - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - priv->thermal_throttle.ct_kill_toggle = false; - } else { - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - priv->thermal_throttle.ct_kill_toggle = true; - } - iwl_read32(trans(priv), CSR_UCODE_DRV_GP1); - spin_lock_irqsave(&trans(priv)->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans(priv)))) - iwl_release_nic_access(trans(priv)); - spin_unlock_irqrestore(&trans(priv)->reg_lock, flags); - - /* Reschedule the ct_kill timer to occur in - * CT_KILL_EXIT_DURATION seconds to ensure we get a - * thermal update */ - IWL_DEBUG_TEMP(priv, "schedule ct_kill exit timer\n"); - mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, - jiffies + CT_KILL_EXIT_DURATION * HZ); - } -} - -static void iwl_perform_ct_kill_task(struct iwl_priv *priv, - bool stop) -{ - if (stop) { - IWL_DEBUG_TEMP(priv, "Stop all queues\n"); - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - IWL_DEBUG_TEMP(priv, - "Schedule 5 seconds CT_KILL Timer\n"); - mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, - jiffies + CT_KILL_EXIT_DURATION * HZ); - } else { - IWL_DEBUG_TEMP(priv, "Wake all queues\n"); - if (priv->mac80211_registered) - ieee80211_wake_queues(priv->hw); - } -} - -static void iwl_tt_ready_for_ct_kill(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* temperature timer expired, ready to go into CT_KILL state */ - if (tt->state != IWL_TI_CT_KILL) { - IWL_DEBUG_TEMP(priv, "entering CT_KILL state when " - "temperature timer expired\n"); - tt->state = IWL_TI_CT_KILL; - set_bit(STATUS_CT_KILL, &priv->status); - iwl_perform_ct_kill_task(priv, true); - } -} - -static void iwl_prepare_ct_kill_task(struct iwl_priv *priv) -{ - IWL_DEBUG_TEMP(priv, "Prepare to enter IWL_TI_CT_KILL\n"); - /* make request to retrieve statistics information */ - iwl_send_statistics_request(priv, CMD_SYNC, false); - /* Reschedule the ct_kill wait timer */ - mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm, - jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION)); -} - -#define IWL_MINIMAL_POWER_THRESHOLD (CT_KILL_THRESHOLD_LEGACY) -#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2 (100) -#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1 (90) - -/* - * Legacy thermal throttling - * 1) Avoid NIC destruction due to high temperatures - * Chip will identify dangerously high temperatures that can - * harm the device and will power down - * 2) Avoid the NIC power down due to high temperature - * Throttle early enough to lower the power consumption before - * drastic steps are needed - */ -static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - enum iwl_tt_state old_state; - -#ifdef CONFIG_IWLWIFI_DEBUG - if ((tt->tt_previous_temp) && - (temp > tt->tt_previous_temp) && - ((temp - tt->tt_previous_temp) > - IWL_TT_INCREASE_MARGIN)) { - IWL_DEBUG_TEMP(priv, - "Temperature increase %d degree Celsius\n", - (temp - tt->tt_previous_temp)); - } -#endif - old_state = tt->state; - /* in Celsius */ - if (temp >= IWL_MINIMAL_POWER_THRESHOLD) - tt->state = IWL_TI_CT_KILL; - else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2) - tt->state = IWL_TI_2; - else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1) - tt->state = IWL_TI_1; - else - tt->state = IWL_TI_0; - -#ifdef CONFIG_IWLWIFI_DEBUG - tt->tt_previous_temp = temp; -#endif - /* stop ct_kill_waiting_tm timer */ - del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm); - if (tt->state != old_state) { - switch (tt->state) { - case IWL_TI_0: - /* - * When the system is ready to go back to IWL_TI_0 - * we only have to call iwl_power_update_mode() to - * do so. - */ - break; - case IWL_TI_1: - tt->tt_power_mode = IWL_POWER_INDEX_3; - break; - case IWL_TI_2: - tt->tt_power_mode = IWL_POWER_INDEX_4; - break; - default: - tt->tt_power_mode = IWL_POWER_INDEX_5; - break; - } - mutex_lock(&priv->mutex); - if (old_state == IWL_TI_CT_KILL) - clear_bit(STATUS_CT_KILL, &priv->status); - if (tt->state != IWL_TI_CT_KILL && - iwl_power_update_mode(priv, true)) { - /* TT state not updated - * try again during next temperature read - */ - if (old_state == IWL_TI_CT_KILL) - set_bit(STATUS_CT_KILL, &priv->status); - tt->state = old_state; - IWL_ERR(priv, "Cannot update power mode, " - "TT state not updated\n"); - } else { - if (tt->state == IWL_TI_CT_KILL) { - if (force) { - set_bit(STATUS_CT_KILL, &priv->status); - iwl_perform_ct_kill_task(priv, true); - } else { - iwl_prepare_ct_kill_task(priv); - tt->state = old_state; - } - } else if (old_state == IWL_TI_CT_KILL && - tt->state != IWL_TI_CT_KILL) - iwl_perform_ct_kill_task(priv, false); - IWL_DEBUG_TEMP(priv, "Temperature state changed %u\n", - tt->state); - IWL_DEBUG_TEMP(priv, "Power Index change to %u\n", - tt->tt_power_mode); - } - mutex_unlock(&priv->mutex); - } -} - -/* - * Advance thermal throttling - * 1) Avoid NIC destruction due to high temperatures - * Chip will identify dangerously high temperatures that can - * harm the device and will power down - * 2) Avoid the NIC power down due to high temperature - * Throttle early enough to lower the power consumption before - * drastic steps are needed - * Actions include relaxing the power down sleep thresholds and - * decreasing the number of TX streams - * 3) Avoid throughput performance impact as much as possible - * - *============================================================================= - * Condition Nxt State Condition Nxt State Condition Nxt State - *----------------------------------------------------------------------------- - * IWL_TI_0 T >= 114 CT_KILL 114>T>=105 TI_1 N/A N/A - * IWL_TI_1 T >= 114 CT_KILL 114>T>=110 TI_2 T<=95 TI_0 - * IWL_TI_2 T >= 114 CT_KILL T<=100 TI_1 - * IWL_CT_KILL N/A N/A N/A N/A T<=95 TI_0 - *============================================================================= - */ -static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - int i; - bool changed = false; - enum iwl_tt_state old_state; - struct iwl_tt_trans *transaction; - - old_state = tt->state; - for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) { - /* based on the current TT state, - * find the curresponding transaction table - * each table has (IWL_TI_STATE_MAX - 1) entries - * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1)) - * will advance to the correct table. - * then based on the current temperature - * find the next state need to transaction to - * go through all the possible (IWL_TI_STATE_MAX - 1) entries - * in the current table to see if transaction is needed - */ - transaction = tt->transaction + - ((old_state * (IWL_TI_STATE_MAX - 1)) + i); - if (temp >= transaction->tt_low && - temp <= transaction->tt_high) { -#ifdef CONFIG_IWLWIFI_DEBUG - if ((tt->tt_previous_temp) && - (temp > tt->tt_previous_temp) && - ((temp - tt->tt_previous_temp) > - IWL_TT_INCREASE_MARGIN)) { - IWL_DEBUG_TEMP(priv, - "Temperature increase %d " - "degree Celsius\n", - (temp - tt->tt_previous_temp)); - } - tt->tt_previous_temp = temp; -#endif - if (old_state != - transaction->next_state) { - changed = true; - tt->state = - transaction->next_state; - } - break; - } - } - /* stop ct_kill_waiting_tm timer */ - del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm); - if (changed) { - if (tt->state >= IWL_TI_1) { - /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */ - tt->tt_power_mode = IWL_POWER_INDEX_5; - - if (!iwl_ht_enabled(priv)) { - struct iwl_rxon_context *ctx; - - for_each_context(priv, ctx) { - struct iwl_rxon_cmd *rxon; - - rxon = &ctx->staging; - - /* disable HT */ - rxon->flags &= ~( - RXON_FLG_CHANNEL_MODE_MSK | - RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | - RXON_FLG_HT40_PROT_MSK | - RXON_FLG_HT_PROT_MSK); - } - } else { - /* check HT capability and set - * according to the system HT capability - * in case get disabled before */ - iwl_set_rxon_ht(priv, &priv->current_ht_config); - } - - } else { - /* - * restore system power setting -- it will be - * recalculated automatically. - */ - - /* check HT capability and set - * according to the system HT capability - * in case get disabled before */ - iwl_set_rxon_ht(priv, &priv->current_ht_config); - } - mutex_lock(&priv->mutex); - if (old_state == IWL_TI_CT_KILL) - clear_bit(STATUS_CT_KILL, &priv->status); - if (tt->state != IWL_TI_CT_KILL && - iwl_power_update_mode(priv, true)) { - /* TT state not updated - * try again during next temperature read - */ - IWL_ERR(priv, "Cannot update power mode, " - "TT state not updated\n"); - if (old_state == IWL_TI_CT_KILL) - set_bit(STATUS_CT_KILL, &priv->status); - tt->state = old_state; - } else { - IWL_DEBUG_TEMP(priv, - "Thermal Throttling to new state: %u\n", - tt->state); - if (old_state != IWL_TI_CT_KILL && - tt->state == IWL_TI_CT_KILL) { - if (force) { - IWL_DEBUG_TEMP(priv, - "Enter IWL_TI_CT_KILL\n"); - set_bit(STATUS_CT_KILL, &priv->status); - iwl_perform_ct_kill_task(priv, true); - } else { - iwl_prepare_ct_kill_task(priv); - tt->state = old_state; - } - } else if (old_state == IWL_TI_CT_KILL && - tt->state != IWL_TI_CT_KILL) { - IWL_DEBUG_TEMP(priv, "Exit IWL_TI_CT_KILL\n"); - iwl_perform_ct_kill_task(priv, false); - } - } - mutex_unlock(&priv->mutex); - } -} - -/* Card State Notification indicated reach critical temperature - * if PSP not enable, no Thermal Throttling function will be performed - * just set the GP1 bit to acknowledge the event - * otherwise, go into IWL_TI_CT_KILL state - * since Card State Notification will not provide any temperature reading - * for Legacy mode - * so just pass the CT_KILL temperature to iwl_legacy_tt_handler() - * for advance mode - * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state - */ -static void iwl_bg_ct_enter(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter); - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!iwl_is_ready(priv)) - return; - - if (tt->state != IWL_TI_CT_KILL) { - IWL_ERR(priv, "Device reached critical temperature " - "- ucode going to sleep!\n"); - if (!priv->thermal_throttle.advanced_tt) - iwl_legacy_tt_handler(priv, - IWL_MINIMAL_POWER_THRESHOLD, - true); - else - iwl_advance_tt_handler(priv, - CT_KILL_THRESHOLD + 1, true); - } -} - -/* Card State Notification indicated out of critical temperature - * since Card State Notification will not provide any temperature reading - * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature - * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state - */ -static void iwl_bg_ct_exit(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit); - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!iwl_is_ready(priv)) - return; - - /* stop ct_kill_exit_tm timer */ - del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm); - - if (tt->state == IWL_TI_CT_KILL) { - IWL_ERR(priv, - "Device temperature below critical" - "- ucode awake!\n"); - /* - * exit from CT_KILL state - * reset the current temperature reading - */ - priv->temperature = 0; - if (!priv->thermal_throttle.advanced_tt) - iwl_legacy_tt_handler(priv, - IWL_REDUCED_PERFORMANCE_THRESHOLD_2, - true); - else - iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD, - true); - } -} - -void iwl_tt_enter_ct_kill(struct iwl_priv *priv) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - IWL_DEBUG_TEMP(priv, "Queueing critical temperature enter.\n"); - queue_work(priv->workqueue, &priv->ct_enter); -} - -void iwl_tt_exit_ct_kill(struct iwl_priv *priv) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - IWL_DEBUG_TEMP(priv, "Queueing critical temperature exit.\n"); - queue_work(priv->workqueue, &priv->ct_exit); -} - -static void iwl_bg_tt_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work); - s32 temp = priv->temperature; /* degrees CELSIUS except specified */ - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!priv->thermal_throttle.advanced_tt) - iwl_legacy_tt_handler(priv, temp, false); - else - iwl_advance_tt_handler(priv, temp, false); -} - -void iwl_tt_handler(struct iwl_priv *priv) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - IWL_DEBUG_TEMP(priv, "Queueing thermal throttling work.\n"); - queue_work(priv->workqueue, &priv->tt_work); -} - -/* Thermal throttling initialization - * For advance thermal throttling: - * Initialize Thermal Index and temperature threshold table - * Initialize thermal throttling restriction table - */ -void iwl_tt_initialize(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1); - struct iwl_tt_trans *transaction; - - IWL_DEBUG_TEMP(priv, "Initialize Thermal Throttling\n"); - - memset(tt, 0, sizeof(struct iwl_tt_mgmt)); - - tt->state = IWL_TI_0; - init_timer(&priv->thermal_throttle.ct_kill_exit_tm); - priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv; - priv->thermal_throttle.ct_kill_exit_tm.function = - iwl_tt_check_exit_ct_kill; - init_timer(&priv->thermal_throttle.ct_kill_waiting_tm); - priv->thermal_throttle.ct_kill_waiting_tm.data = - (unsigned long)priv; - priv->thermal_throttle.ct_kill_waiting_tm.function = - iwl_tt_ready_for_ct_kill; - /* setup deferred ct kill work */ - INIT_WORK(&priv->tt_work, iwl_bg_tt_work); - INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter); - INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit); - - if (cfg(priv)->base_params->adv_thermal_throttle) { - IWL_DEBUG_TEMP(priv, "Advanced Thermal Throttling\n"); - tt->restriction = kcalloc(IWL_TI_STATE_MAX, - sizeof(struct iwl_tt_restriction), - GFP_KERNEL); - tt->transaction = kcalloc(IWL_TI_STATE_MAX * - (IWL_TI_STATE_MAX - 1), - sizeof(struct iwl_tt_trans), - GFP_KERNEL); - if (!tt->restriction || !tt->transaction) { - IWL_ERR(priv, "Fallback to Legacy Throttling\n"); - priv->thermal_throttle.advanced_tt = false; - kfree(tt->restriction); - tt->restriction = NULL; - kfree(tt->transaction); - tt->transaction = NULL; - } else { - transaction = tt->transaction + - (IWL_TI_0 * (IWL_TI_STATE_MAX - 1)); - memcpy(transaction, &tt_range_0[0], size); - transaction = tt->transaction + - (IWL_TI_1 * (IWL_TI_STATE_MAX - 1)); - memcpy(transaction, &tt_range_1[0], size); - transaction = tt->transaction + - (IWL_TI_2 * (IWL_TI_STATE_MAX - 1)); - memcpy(transaction, &tt_range_2[0], size); - transaction = tt->transaction + - (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1)); - memcpy(transaction, &tt_range_3[0], size); - size = sizeof(struct iwl_tt_restriction) * - IWL_TI_STATE_MAX; - memcpy(tt->restriction, - &restriction_range[0], size); - priv->thermal_throttle.advanced_tt = true; - } - } else { - IWL_DEBUG_TEMP(priv, "Legacy Thermal Throttling\n"); - priv->thermal_throttle.advanced_tt = false; - } -} - -/* cleanup thermal throttling management related memory and timer */ -void iwl_tt_exit(struct iwl_priv *priv) -{ - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - - /* stop ct_kill_exit_tm timer if activated */ - del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm); - /* stop ct_kill_waiting_tm timer if activated */ - del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm); - cancel_work_sync(&priv->tt_work); - cancel_work_sync(&priv->ct_enter); - cancel_work_sync(&priv->ct_exit); - - if (priv->thermal_throttle.advanced_tt) { - /* free advance thermal throttling memory */ - kfree(tt->restriction); - tt->restriction = NULL; - kfree(tt->transaction); - tt->transaction = NULL; - } -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tt.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tt.h deleted file mode 100644 index 86bbf475..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tt.h +++ /dev/null @@ -1,128 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ -#ifndef __iwl_tt_setting_h__ -#define __iwl_tt_setting_h__ - -#include "iwl-commands.h" - -#define IWL_ABSOLUTE_ZERO 0 -#define IWL_ABSOLUTE_MAX 0xFFFFFFFF -#define IWL_TT_INCREASE_MARGIN 5 -#define IWL_TT_CT_KILL_MARGIN 3 - -enum iwl_antenna_ok { - IWL_ANT_OK_NONE, - IWL_ANT_OK_SINGLE, - IWL_ANT_OK_MULTI, -}; - -/* Thermal Throttling State Machine states */ -enum iwl_tt_state { - IWL_TI_0, /* normal temperature, system power state */ - IWL_TI_1, /* high temperature detect, low power state */ - IWL_TI_2, /* higher temperature detected, lower power state */ - IWL_TI_CT_KILL, /* critical temperature detected, lowest power state */ - IWL_TI_STATE_MAX -}; - -/** - * struct iwl_tt_restriction - Thermal Throttling restriction table - * @tx_stream: number of tx stream allowed - * @is_ht: ht enable/disable - * @rx_stream: number of rx stream allowed - * - * This table is used by advance thermal throttling management - * based on the current thermal throttling state, and determines - * the number of tx/rx streams and the status of HT operation. - */ -struct iwl_tt_restriction { - enum iwl_antenna_ok tx_stream; - enum iwl_antenna_ok rx_stream; - bool is_ht; -}; - -/** - * struct iwl_tt_trans - Thermal Throttling transaction table - * @next_state: next thermal throttling mode - * @tt_low: low temperature threshold to change state - * @tt_high: high temperature threshold to change state - * - * This is used by the advanced thermal throttling algorithm - * to determine the next thermal state to go based on the - * current temperature. - */ -struct iwl_tt_trans { - enum iwl_tt_state next_state; - u32 tt_low; - u32 tt_high; -}; - -/** - * struct iwl_tt_mgnt - Thermal Throttling Management structure - * @advanced_tt: advanced thermal throttle required - * @state: current Thermal Throttling state - * @tt_power_mode: Thermal Throttling power mode index - * being used to set power level when - * when thermal throttling state != IWL_TI_0 - * the tt_power_mode should set to different - * power mode based on the current tt state - * @tt_previous_temperature: last measured temperature - * @iwl_tt_restriction: ptr to restriction tbl, used by advance - * thermal throttling to determine how many tx/rx streams - * should be used in tt state; and can HT be enabled or not - * @iwl_tt_trans: ptr to adv trans table, used by advance thermal throttling - * state transaction - * @ct_kill_toggle: used to toggle the CSR bit when checking uCode temperature - * @ct_kill_exit_tm: timer to exit thermal kill - */ -struct iwl_tt_mgmt { - enum iwl_tt_state state; - bool advanced_tt; - u8 tt_power_mode; - bool ct_kill_toggle; -#ifdef CONFIG_IWLWIFI_DEBUG - s32 tt_previous_temp; -#endif - struct iwl_tt_restriction *restriction; - struct iwl_tt_trans *transaction; - struct timer_list ct_kill_exit_tm; - struct timer_list ct_kill_waiting_tm; -}; - -u8 iwl_tt_current_power_mode(struct iwl_priv *priv); -bool iwl_tt_is_low_power_state(struct iwl_priv *priv); -bool iwl_ht_enabled(struct iwl_priv *priv); -enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv); -enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv); -void iwl_tt_enter_ct_kill(struct iwl_priv *priv); -void iwl_tt_exit_ct_kill(struct iwl_priv *priv); -void iwl_tt_handler(struct iwl_priv *priv); -void iwl_tt_initialize(struct iwl_priv *priv); -void iwl_tt_exit(struct iwl_priv *priv); - -#endif /* __iwl_tt_setting_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tx.c deleted file mode 100644 index 34adedc7..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ /dev/null @@ -1,1258 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ieee80211.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-hw.h" -#include "iwl-agn.h" -#include "iwl-trans.h" - -static void iwlagn_tx_cmd_protection(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - __le16 fc, __le32 *tx_flags) -{ - if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS || - info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT || - info->flags & IEEE80211_TX_CTL_AMPDU) - *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; -} - -/* - * handle build REPLY_TX command notification. - */ -static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, - struct sk_buff *skb, - struct iwl_tx_cmd *tx_cmd, - struct ieee80211_tx_info *info, - struct ieee80211_hdr *hdr, u8 sta_id) -{ - __le16 fc = hdr->frame_control; - __le32 tx_flags = tx_cmd->tx_flags; - - tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) - tx_flags |= TX_CMD_FLG_ACK_MSK; - else - tx_flags &= ~TX_CMD_FLG_ACK_MSK; - - if (ieee80211_is_probe_resp(fc)) - tx_flags |= TX_CMD_FLG_TSF_MSK; - else if (ieee80211_is_back_req(fc)) - tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; - else if (info->band == IEEE80211_BAND_2GHZ && - cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist && - (ieee80211_is_auth(fc) || ieee80211_is_assoc_req(fc) || - ieee80211_is_reassoc_req(fc) || - skb->protocol == cpu_to_be16(ETH_P_PAE))) - tx_flags |= TX_CMD_FLG_IGNORE_BT; - - - tx_cmd->sta_id = sta_id; - if (ieee80211_has_morefrags(fc)) - tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK; - - if (ieee80211_is_data_qos(fc)) { - u8 *qc = ieee80211_get_qos_ctl(hdr); - tx_cmd->tid_tspec = qc[0] & 0xf; - tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } else { - tx_cmd->tid_tspec = IWL_TID_NON_QOS; - if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) - tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK; - else - tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK; - } - - iwlagn_tx_cmd_protection(priv, info, fc, &tx_flags); - - tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK); - if (ieee80211_is_mgmt(fc)) { - if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc)) - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3); - else - tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2); - } else { - tx_cmd->timeout.pm_frame_timeout = 0; - } - - tx_cmd->driver_txop = 0; - tx_cmd->tx_flags = tx_flags; - tx_cmd->next_frame_len = 0; -} - -static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv, - struct iwl_tx_cmd *tx_cmd, - struct ieee80211_tx_info *info, - __le16 fc) -{ - u32 rate_flags; - int rate_idx; - u8 rts_retry_limit; - u8 data_retry_limit; - u8 rate_plcp; - - if (priv->wowlan) { - rts_retry_limit = IWLAGN_LOW_RETRY_LIMIT; - data_retry_limit = IWLAGN_LOW_RETRY_LIMIT; - } else { - /* Set retry limit on RTS packets */ - rts_retry_limit = IWLAGN_RTS_DFAULT_RETRY_LIMIT; - - /* Set retry limit on DATA packets and Probe Responses*/ - if (ieee80211_is_probe_resp(fc)) { - data_retry_limit = IWLAGN_MGMT_DFAULT_RETRY_LIMIT; - rts_retry_limit = - min(data_retry_limit, rts_retry_limit); - } else if (ieee80211_is_back_req(fc)) - data_retry_limit = IWLAGN_BAR_DFAULT_RETRY_LIMIT; - else - data_retry_limit = IWLAGN_DEFAULT_TX_RETRY; - } - - tx_cmd->data_retry_limit = data_retry_limit; - tx_cmd->rts_retry_limit = rts_retry_limit; - - /* DATA packets will use the uCode station table for rate/antenna - * selection */ - if (ieee80211_is_data(fc)) { - tx_cmd->initial_rate_index = 0; - tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE - if (priv->tm_fixed_rate) { - /* - * rate overwrite by testmode - * we not only send lq command to change rate - * we also re-enforce per data pkt base. - */ - tx_cmd->tx_flags &= ~TX_CMD_FLG_STA_RATE_MSK; - memcpy(&tx_cmd->rate_n_flags, &priv->tm_fixed_rate, - sizeof(tx_cmd->rate_n_flags)); - } -#endif - return; - } else if (ieee80211_is_back_req(fc)) - tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK; - - /** - * If the current TX rate stored in mac80211 has the MCS bit set, it's - * not really a TX rate. Thus, we use the lowest supported rate for - * this band. Also use the lowest supported rate if the stored rate - * index is invalid. - */ - rate_idx = info->control.rates[0].idx; - if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS || - (rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY)) - rate_idx = rate_lowest_index(&priv->bands[info->band], - info->control.sta); - /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ - if (info->band == IEEE80211_BAND_5GHZ) - rate_idx += IWL_FIRST_OFDM_RATE; - /* Get PLCP rate for tx_cmd->rate_n_flags */ - rate_plcp = iwl_rates[rate_idx].plcp; - /* Zero out flags for this packet */ - rate_flags = 0; - - /* Set CCK flag as needed */ - if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE)) - rate_flags |= RATE_MCS_CCK_MSK; - - /* Set up antennas */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist && - priv->bt_full_concurrent) { - /* operated as 1x1 in full concurrency mode */ - priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, - first_antenna(hw_params(priv).valid_tx_ant)); - } else - priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, - hw_params(priv).valid_tx_ant); - rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant); - - /* Set the rate in the TX cmd */ - tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags); -} - -static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - struct iwl_tx_cmd *tx_cmd, - struct sk_buff *skb_frag) -{ - struct ieee80211_key_conf *keyconf = info->control.hw_key; - - switch (keyconf->cipher) { - case WLAN_CIPHER_SUITE_CCMP: - tx_cmd->sec_ctl = TX_CMD_SEC_CCM; - memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); - if (info->flags & IEEE80211_TX_CTL_AMPDU) - tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; - IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); - break; - - case WLAN_CIPHER_SUITE_TKIP: - tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; - ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); - IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n"); - break; - - case WLAN_CIPHER_SUITE_WEP104: - tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128; - /* fall through */ - case WLAN_CIPHER_SUITE_WEP40: - tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP | - (keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT); - - memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen); - - IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption " - "with key %d\n", keyconf->keyidx); - break; - - default: - IWL_ERR(priv, "Unknown encode cipher %x\n", keyconf->cipher); - break; - } -} - -/** - * iwl_sta_id_or_broadcast - return sta_id or broadcast sta - * @context: the current context - * @sta: mac80211 station - * - * In certain circumstances mac80211 passes a station pointer - * that may be %NULL, for example during TX or key setup. In - * that case, we need to use the broadcast station, so this - * inline wraps that pattern. - */ -static int iwl_sta_id_or_broadcast(struct iwl_rxon_context *context, - struct ieee80211_sta *sta) -{ - int sta_id; - - if (!sta) - return context->bcast_sta_id; - - sta_id = iwl_sta_id(sta); - - /* - * mac80211 should not be passing a partially - * initialised station! - */ - WARN_ON(sta_id == IWL_INVALID_STATION); - - return sta_id; -} - -/* - * start REPLY_TX command process - */ -int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) -{ - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl_station_priv *sta_priv = NULL; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl_device_cmd *dev_cmd = NULL; - struct iwl_tx_cmd *tx_cmd; - __le16 fc; - u8 hdr_len; - u16 len, seq_number = 0; - u8 sta_id, tid = IWL_MAX_TID_COUNT; - bool is_agg = false; - - if (info->control.vif) - ctx = iwl_rxon_ctx_from_vif(info->control.vif); - - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n"); - goto drop_unlock_priv; - } - - fc = hdr->frame_control; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (ieee80211_is_auth(fc)) - IWL_DEBUG_TX(priv, "Sending AUTH frame\n"); - else if (ieee80211_is_assoc_req(fc)) - IWL_DEBUG_TX(priv, "Sending ASSOC frame\n"); - else if (ieee80211_is_reassoc_req(fc)) - IWL_DEBUG_TX(priv, "Sending REASSOC frame\n"); -#endif - - if (unlikely(ieee80211_is_probe_resp(fc))) { - struct iwl_wipan_noa_data *noa_data = - rcu_dereference(priv->noa_data); - - if (noa_data && - pskb_expand_head(skb, 0, noa_data->length, - GFP_ATOMIC) == 0) { - memcpy(skb_put(skb, noa_data->length), - noa_data->data, noa_data->length); - hdr = (struct ieee80211_hdr *)skb->data; - } - } - - hdr_len = ieee80211_hdrlen(fc); - - /* For management frames use broadcast id to do not break aggregation */ - if (!ieee80211_is_data(fc)) - sta_id = ctx->bcast_sta_id; - else { - /* Find index into station table for destination station */ - sta_id = iwl_sta_id_or_broadcast(ctx, info->control.sta); - if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", - hdr->addr1); - goto drop_unlock_priv; - } - } - - IWL_DEBUG_TX(priv, "station Id %d\n", sta_id); - - if (info->control.sta) - sta_priv = (void *)info->control.sta->drv_priv; - - if (sta_priv && sta_priv->asleep && - (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { - /* - * This sends an asynchronous command to the device, - * but we can rely on it being processed before the - * next frame is processed -- and the next frame to - * this station is the one that will consume this - * counter. - * For now set the counter to just 1 since we do not - * support uAPSD yet. - * - * FIXME: If we get two non-bufferable frames one - * after the other, we might only send out one of - * them because this is racy. - */ - iwl_sta_modify_sleep_tx_count(priv, sta_id, 1); - } - - if (info->flags & IEEE80211_TX_CTL_AMPDU) - is_agg = true; - - dev_cmd = kmem_cache_alloc(iwl_tx_cmd_pool, GFP_ATOMIC); - - if (unlikely(!dev_cmd)) - goto drop_unlock_priv; - - memset(dev_cmd, 0, sizeof(*dev_cmd)); - tx_cmd = (struct iwl_tx_cmd *) dev_cmd->payload; - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx_cmd->len = cpu_to_le16(len); - - if (info->control.hw_key) - iwlagn_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb); - - /* TODO need this for burst mode later on */ - iwlagn_tx_cmd_build_basic(priv, skb, tx_cmd, info, hdr, sta_id); - iwl_dbg_log_tx_data_frame(priv, len, hdr); - - iwlagn_tx_cmd_build_rate(priv, tx_cmd, info, fc); - - iwl_update_stats(priv, true, fc, len); - - memset(&info->status, 0, sizeof(info->status)); - - info->driver_data[0] = ctx; - info->driver_data[1] = dev_cmd; - - spin_lock(&priv->sta_lock); - - if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc)) { - u8 *qc = NULL; - struct iwl_tid_data *tid_data; - qc = ieee80211_get_qos_ctl(hdr); - tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; - if (WARN_ON_ONCE(tid >= IWL_MAX_TID_COUNT)) - goto drop_unlock_sta; - tid_data = &priv->tid_data[sta_id][tid]; - - /* aggregation is on for this <sta,tid> */ - if (info->flags & IEEE80211_TX_CTL_AMPDU && - tid_data->agg.state != IWL_AGG_ON) { - IWL_ERR(priv, "TX_CTL_AMPDU while not in AGG:" - " Tx flags = 0x%08x, agg.state = %d", - info->flags, tid_data->agg.state); - IWL_ERR(priv, "sta_id = %d, tid = %d seq_num = %d", - sta_id, tid, SEQ_TO_SN(tid_data->seq_number)); - goto drop_unlock_sta; - } - - /* We can receive packets from the stack in IWL_AGG_{ON,OFF} - * only. Check this here. - */ - if (WARN_ONCE(tid_data->agg.state != IWL_AGG_ON && - tid_data->agg.state != IWL_AGG_OFF, - "Tx while agg.state = %d", tid_data->agg.state)) - goto drop_unlock_sta; - - seq_number = tid_data->seq_number; - seq_number &= IEEE80211_SCTL_SEQ; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(seq_number); - seq_number += 0x10; - } - - /* Copy MAC header from skb into command buffer */ - memcpy(tx_cmd->hdr, hdr, hdr_len); - - if (iwl_trans_tx(trans(priv), skb, dev_cmd, ctx->ctxid, sta_id, tid)) - goto drop_unlock_sta; - - if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc) && - !ieee80211_has_morefrags(fc)) - priv->tid_data[sta_id][tid].seq_number = seq_number; - - spin_unlock(&priv->sta_lock); - - /* - * Avoid atomic ops if it isn't an associated client. - * Also, if this is a packet for aggregation, don't - * increase the counter because the ucode will stop - * aggregation queues when their respective station - * goes to sleep. - */ - if (sta_priv && sta_priv->client && !is_agg) - atomic_inc(&sta_priv->pending_frames); - - return 0; - -drop_unlock_sta: - if (dev_cmd) - kmem_cache_free(iwl_tx_cmd_pool, dev_cmd); - spin_unlock(&priv->sta_lock); -drop_unlock_priv: - return -1; -} - -int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid) -{ - struct iwl_tid_data *tid_data; - int sta_id; - - sta_id = iwl_sta_id(sta); - - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); - return -ENXIO; - } - - spin_lock_bh(&priv->sta_lock); - - tid_data = &priv->tid_data[sta_id][tid]; - - switch (priv->tid_data[sta_id][tid].agg.state) { - case IWL_EMPTYING_HW_QUEUE_ADDBA: - /* - * This can happen if the peer stops aggregation - * again before we've had a chance to drain the - * queue we selected previously, i.e. before the - * session was really started completely. - */ - IWL_DEBUG_HT(priv, "AGG stop before setup done\n"); - goto turn_off; - case IWL_AGG_ON: - break; - default: - IWL_WARN(priv, "Stopping AGG while state not ON " - "or starting for %d on %d (%d)\n", sta_id, tid, - priv->tid_data[sta_id][tid].agg.state); - spin_unlock_bh(&priv->sta_lock); - return 0; - } - - tid_data->agg.ssn = SEQ_TO_SN(tid_data->seq_number); - - /* There are still packets for this RA / TID in the HW */ - if (tid_data->agg.ssn != tid_data->next_reclaimed) { - IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, " - "next_recl = %d", - tid_data->agg.ssn, - tid_data->next_reclaimed); - priv->tid_data[sta_id][tid].agg.state = - IWL_EMPTYING_HW_QUEUE_DELBA; - spin_unlock_bh(&priv->sta_lock); - return 0; - } - - IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d", - tid_data->agg.ssn); -turn_off: - priv->tid_data[sta_id][tid].agg.state = IWL_AGG_OFF; - - spin_unlock_bh(&priv->sta_lock); - - iwl_trans_tx_agg_disable(trans(priv), sta_id, tid); - - ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); - - return 0; -} - -int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid, u16 *ssn) -{ - struct iwl_tid_data *tid_data; - int sta_id; - int ret; - - IWL_DEBUG_HT(priv, "TX AGG request on ra = %pM tid = %d\n", - sta->addr, tid); - - sta_id = iwl_sta_id(sta); - if (sta_id == IWL_INVALID_STATION) { - IWL_ERR(priv, "Start AGG on invalid station\n"); - return -ENXIO; - } - if (unlikely(tid >= IWL_MAX_TID_COUNT)) - return -EINVAL; - - if (priv->tid_data[sta_id][tid].agg.state != IWL_AGG_OFF) { - IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n"); - return -ENXIO; - } - - ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid); - if (ret) - return ret; - - spin_lock_bh(&priv->sta_lock); - - tid_data = &priv->tid_data[sta_id][tid]; - tid_data->agg.ssn = SEQ_TO_SN(tid_data->seq_number); - - *ssn = tid_data->agg.ssn; - - ret = iwl_trans_tx_agg_alloc(trans(priv), sta_id, tid); - if (ret) { - spin_unlock_bh(&priv->sta_lock); - return ret; - } - - if (*ssn == tid_data->next_reclaimed) { - IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d", - tid_data->agg.ssn); - tid_data->agg.state = IWL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); - } else { - IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, " - "next_reclaimed = %d", - tid_data->agg.ssn, - tid_data->next_reclaimed); - tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA; - } - - spin_unlock_bh(&priv->sta_lock); - - return ret; -} - -int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid, u8 buf_size) -{ - struct iwl_station_priv *sta_priv = (void *) sta->drv_priv; - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - u16 ssn; - - buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF); - - spin_lock_bh(&priv->sta_lock); - ssn = priv->tid_data[sta_priv->sta_id][tid].agg.ssn; - spin_unlock_bh(&priv->sta_lock); - - iwl_trans_tx_agg_setup(trans(priv), ctx->ctxid, sta_priv->sta_id, tid, - buf_size, ssn); - - /* - * If the limit is 0, then it wasn't initialised yet, - * use the default. We can do that since we take the - * minimum below, and we don't want to go above our - * default due to hardware restrictions. - */ - if (sta_priv->max_agg_bufsize == 0) - sta_priv->max_agg_bufsize = - LINK_QUAL_AGG_FRAME_LIMIT_DEF; - - /* - * Even though in theory the peer could have different - * aggregation reorder buffer sizes for different sessions, - * our ucode doesn't allow for that and has a global limit - * for each station. Therefore, use the minimum of all the - * aggregation sessions and our default value. - */ - sta_priv->max_agg_bufsize = - min(sta_priv->max_agg_bufsize, buf_size); - - if (hw_params(priv).use_rts_for_aggregation) { - /* - * switch to RTS/CTS if it is the prefer protection - * method for HT traffic - */ - - sta_priv->lq_sta.lq.general_params.flags |= - LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; - } - priv->agg_tids_count++; - IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", - priv->agg_tids_count); - - sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit = - sta_priv->max_agg_bufsize; - - IWL_DEBUG_HT(priv, "Tx aggregation enabled on ra = %pM tid = %d\n", - sta->addr, tid); - - return iwl_send_lq_cmd(priv, ctx, - &sta_priv->lq_sta.lq, CMD_ASYNC, false); -} - -static void iwlagn_check_ratid_empty(struct iwl_priv *priv, int sta_id, u8 tid) -{ - struct iwl_tid_data *tid_data = &priv->tid_data[sta_id][tid]; - enum iwl_rxon_context_id ctx; - struct ieee80211_vif *vif; - u8 *addr; - - lockdep_assert_held(&priv->sta_lock); - - addr = priv->stations[sta_id].sta.sta.addr; - ctx = priv->stations[sta_id].ctxid; - vif = priv->contexts[ctx].vif; - - switch (priv->tid_data[sta_id][tid].agg.state) { - case IWL_EMPTYING_HW_QUEUE_DELBA: - /* There are no packets for this RA / TID in the HW any more */ - if (tid_data->agg.ssn == tid_data->next_reclaimed) { - IWL_DEBUG_TX_QUEUES(priv, - "Can continue DELBA flow ssn = next_recl =" - " %d", tid_data->next_reclaimed); - iwl_trans_tx_agg_disable(trans(priv), sta_id, tid); - tid_data->agg.state = IWL_AGG_OFF; - ieee80211_stop_tx_ba_cb_irqsafe(vif, addr, tid); - } - break; - case IWL_EMPTYING_HW_QUEUE_ADDBA: - /* There are no packets for this RA / TID in the HW any more */ - if (tid_data->agg.ssn == tid_data->next_reclaimed) { - IWL_DEBUG_TX_QUEUES(priv, - "Can continue ADDBA flow ssn = next_recl =" - " %d", tid_data->next_reclaimed); - tid_data->agg.state = IWL_AGG_ON; - ieee80211_start_tx_ba_cb_irqsafe(vif, addr, tid); - } - break; - default: - break; - } -} - -static void iwlagn_non_agg_tx_status(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - const u8 *addr1) -{ - struct ieee80211_sta *sta; - struct iwl_station_priv *sta_priv; - - rcu_read_lock(); - sta = ieee80211_find_sta(ctx->vif, addr1); - if (sta) { - sta_priv = (void *)sta->drv_priv; - /* avoid atomic ops if this isn't a client */ - if (sta_priv->client && - atomic_dec_return(&sta_priv->pending_frames) == 0) - ieee80211_sta_block_awake(priv->hw, sta, false); - } - rcu_read_unlock(); -} - -/** - * translate ucode response to mac80211 tx status control values - */ -static void iwlagn_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, - struct ieee80211_tx_info *info) -{ - struct ieee80211_tx_rate *r = &info->control.rates[0]; - - info->antenna_sel_tx = - ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); - if (rate_n_flags & RATE_MCS_HT_MSK) - r->flags |= IEEE80211_TX_RC_MCS; - if (rate_n_flags & RATE_MCS_GF_MSK) - r->flags |= IEEE80211_TX_RC_GREEN_FIELD; - if (rate_n_flags & RATE_MCS_HT40_MSK) - r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; - if (rate_n_flags & RATE_MCS_DUP_MSK) - r->flags |= IEEE80211_TX_RC_DUP_DATA; - if (rate_n_flags & RATE_MCS_SGI_MSK) - r->flags |= IEEE80211_TX_RC_SHORT_GI; - r->idx = iwlagn_hwrate_to_mac80211_idx(rate_n_flags, info->band); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -const char *iwl_get_tx_fail_reason(u32 status) -{ -#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x -#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x - - switch (status & TX_STATUS_MSK) { - case TX_STATUS_SUCCESS: - return "SUCCESS"; - TX_STATUS_POSTPONE(DELAY); - TX_STATUS_POSTPONE(FEW_BYTES); - TX_STATUS_POSTPONE(BT_PRIO); - TX_STATUS_POSTPONE(QUIET_PERIOD); - TX_STATUS_POSTPONE(CALC_TTAK); - TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY); - TX_STATUS_FAIL(SHORT_LIMIT); - TX_STATUS_FAIL(LONG_LIMIT); - TX_STATUS_FAIL(FIFO_UNDERRUN); - TX_STATUS_FAIL(DRAIN_FLOW); - TX_STATUS_FAIL(RFKILL_FLUSH); - TX_STATUS_FAIL(LIFE_EXPIRE); - TX_STATUS_FAIL(DEST_PS); - TX_STATUS_FAIL(HOST_ABORTED); - TX_STATUS_FAIL(BT_RETRY); - TX_STATUS_FAIL(STA_INVALID); - TX_STATUS_FAIL(FRAG_DROPPED); - TX_STATUS_FAIL(TID_DISABLE); - TX_STATUS_FAIL(FIFO_FLUSHED); - TX_STATUS_FAIL(INSUFFICIENT_CF_POLL); - TX_STATUS_FAIL(PASSIVE_NO_RX); - TX_STATUS_FAIL(NO_BEACON_ON_RADAR); - } - - return "UNKNOWN"; - -#undef TX_STATUS_FAIL -#undef TX_STATUS_POSTPONE -} -#endif /* CONFIG_IWLWIFI_DEBUG */ - -static void iwlagn_count_agg_tx_err_status(struct iwl_priv *priv, u16 status) -{ - status &= AGG_TX_STATUS_MSK; - - switch (status) { - case AGG_TX_STATE_UNDERRUN_MSK: - priv->reply_agg_tx_stats.underrun++; - break; - case AGG_TX_STATE_BT_PRIO_MSK: - priv->reply_agg_tx_stats.bt_prio++; - break; - case AGG_TX_STATE_FEW_BYTES_MSK: - priv->reply_agg_tx_stats.few_bytes++; - break; - case AGG_TX_STATE_ABORT_MSK: - priv->reply_agg_tx_stats.abort++; - break; - case AGG_TX_STATE_LAST_SENT_TTL_MSK: - priv->reply_agg_tx_stats.last_sent_ttl++; - break; - case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK: - priv->reply_agg_tx_stats.last_sent_try++; - break; - case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK: - priv->reply_agg_tx_stats.last_sent_bt_kill++; - break; - case AGG_TX_STATE_SCD_QUERY_MSK: - priv->reply_agg_tx_stats.scd_query++; - break; - case AGG_TX_STATE_TEST_BAD_CRC32_MSK: - priv->reply_agg_tx_stats.bad_crc32++; - break; - case AGG_TX_STATE_RESPONSE_MSK: - priv->reply_agg_tx_stats.response++; - break; - case AGG_TX_STATE_DUMP_TX_MSK: - priv->reply_agg_tx_stats.dump_tx++; - break; - case AGG_TX_STATE_DELAY_TX_MSK: - priv->reply_agg_tx_stats.delay_tx++; - break; - default: - priv->reply_agg_tx_stats.unknown++; - break; - } -} - -static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, - struct iwlagn_tx_resp *tx_resp) -{ - struct agg_tx_status *frame_status = &tx_resp->status; - int tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >> - IWLAGN_TX_RES_TID_POS; - int sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> - IWLAGN_TX_RES_RA_POS; - struct iwl_ht_agg *agg = &priv->tid_data[sta_id][tid].agg; - u32 status = le16_to_cpu(tx_resp->status.status); - int i; - - WARN_ON(tid == IWL_TID_NON_QOS); - - if (agg->wait_for_ba) - IWL_DEBUG_TX_REPLY(priv, - "got tx response w/o block-ack\n"); - - agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags); - agg->wait_for_ba = (tx_resp->frame_count > 1); - - /* - * If the BT kill count is non-zero, we'll get this - * notification again. - */ - if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 && - cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - IWL_DEBUG_COEX(priv, "receive reply tx w/ bt_kill\n"); - } - - if (tx_resp->frame_count == 1) - return; - - /* Construct bit-map of pending frames within Tx window */ - for (i = 0; i < tx_resp->frame_count; i++) { - u16 fstatus = le16_to_cpu(frame_status[i].status); - - if (status & AGG_TX_STATUS_MSK) - iwlagn_count_agg_tx_err_status(priv, fstatus); - - if (status & (AGG_TX_STATE_FEW_BYTES_MSK | - AGG_TX_STATE_ABORT_MSK)) - continue; - - IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), " - "try-count (0x%08x)\n", - iwl_get_agg_tx_fail_reason(fstatus), - fstatus & AGG_TX_STATUS_MSK, - fstatus & AGG_TX_TRY_MSK); - } -} - -#ifdef CONFIG_IWLWIFI_DEBUG -#define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x - -const char *iwl_get_agg_tx_fail_reason(u16 status) -{ - status &= AGG_TX_STATUS_MSK; - switch (status) { - case AGG_TX_STATE_TRANSMITTED: - return "SUCCESS"; - AGG_TX_STATE_FAIL(UNDERRUN_MSK); - AGG_TX_STATE_FAIL(BT_PRIO_MSK); - AGG_TX_STATE_FAIL(FEW_BYTES_MSK); - AGG_TX_STATE_FAIL(ABORT_MSK); - AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK); - AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK); - AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK); - AGG_TX_STATE_FAIL(SCD_QUERY_MSK); - AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK); - AGG_TX_STATE_FAIL(RESPONSE_MSK); - AGG_TX_STATE_FAIL(DUMP_TX_MSK); - AGG_TX_STATE_FAIL(DELAY_TX_MSK); - } - - return "UNKNOWN"; -} -#endif /* CONFIG_IWLWIFI_DEBUG */ - -static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp) -{ - return le32_to_cpup((__le32 *)&tx_resp->status + - tx_resp->frame_count) & MAX_SN; -} - -static void iwlagn_count_tx_err_status(struct iwl_priv *priv, u16 status) -{ - status &= TX_STATUS_MSK; - - switch (status) { - case TX_STATUS_POSTPONE_DELAY: - priv->reply_tx_stats.pp_delay++; - break; - case TX_STATUS_POSTPONE_FEW_BYTES: - priv->reply_tx_stats.pp_few_bytes++; - break; - case TX_STATUS_POSTPONE_BT_PRIO: - priv->reply_tx_stats.pp_bt_prio++; - break; - case TX_STATUS_POSTPONE_QUIET_PERIOD: - priv->reply_tx_stats.pp_quiet_period++; - break; - case TX_STATUS_POSTPONE_CALC_TTAK: - priv->reply_tx_stats.pp_calc_ttak++; - break; - case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY: - priv->reply_tx_stats.int_crossed_retry++; - break; - case TX_STATUS_FAIL_SHORT_LIMIT: - priv->reply_tx_stats.short_limit++; - break; - case TX_STATUS_FAIL_LONG_LIMIT: - priv->reply_tx_stats.long_limit++; - break; - case TX_STATUS_FAIL_FIFO_UNDERRUN: - priv->reply_tx_stats.fifo_underrun++; - break; - case TX_STATUS_FAIL_DRAIN_FLOW: - priv->reply_tx_stats.drain_flow++; - break; - case TX_STATUS_FAIL_RFKILL_FLUSH: - priv->reply_tx_stats.rfkill_flush++; - break; - case TX_STATUS_FAIL_LIFE_EXPIRE: - priv->reply_tx_stats.life_expire++; - break; - case TX_STATUS_FAIL_DEST_PS: - priv->reply_tx_stats.dest_ps++; - break; - case TX_STATUS_FAIL_HOST_ABORTED: - priv->reply_tx_stats.host_abort++; - break; - case TX_STATUS_FAIL_BT_RETRY: - priv->reply_tx_stats.bt_retry++; - break; - case TX_STATUS_FAIL_STA_INVALID: - priv->reply_tx_stats.sta_invalid++; - break; - case TX_STATUS_FAIL_FRAG_DROPPED: - priv->reply_tx_stats.frag_drop++; - break; - case TX_STATUS_FAIL_TID_DISABLE: - priv->reply_tx_stats.tid_disable++; - break; - case TX_STATUS_FAIL_FIFO_FLUSHED: - priv->reply_tx_stats.fifo_flush++; - break; - case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL: - priv->reply_tx_stats.insuff_cf_poll++; - break; - case TX_STATUS_FAIL_PASSIVE_NO_RX: - priv->reply_tx_stats.fail_hw_drop++; - break; - case TX_STATUS_FAIL_NO_BEACON_ON_RADAR: - priv->reply_tx_stats.sta_color_mismatch++; - break; - default: - priv->reply_tx_stats.unknown++; - break; - } -} - -static void iwlagn_set_tx_status(struct iwl_priv *priv, - struct ieee80211_tx_info *info, - struct iwlagn_tx_resp *tx_resp, - bool is_agg) -{ - u16 status = le16_to_cpu(tx_resp->status.status); - - info->status.rates[0].count = tx_resp->failure_frame + 1; - if (is_agg) - info->flags &= ~IEEE80211_TX_CTL_AMPDU; - info->flags |= iwl_tx_status_to_mac80211(status); - iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), - info); - if (!iwl_is_tx_success(status)) - iwlagn_count_tx_err_status(priv, status); -} - -static void iwl_check_abort_status(struct iwl_priv *priv, - u8 frame_count, u32 status) -{ - if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { - IWL_ERR(priv, "Tx flush command to flush out all frames\n"); - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) - queue_work(priv->workqueue, &priv->tx_flush); - } -} - -int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int cmd_index __maybe_unused = SEQ_TO_INDEX(sequence); - struct iwlagn_tx_resp *tx_resp = (void *)pkt->data; - struct ieee80211_hdr *hdr; - u32 status = le16_to_cpu(tx_resp->status.status); - u16 ssn = iwlagn_get_scd_ssn(tx_resp); - int tid; - int sta_id; - int freed; - struct ieee80211_tx_info *info; - struct sk_buff_head skbs; - struct sk_buff *skb; - struct iwl_rxon_context *ctx; - bool is_agg = (txq_id >= IWLAGN_FIRST_AMPDU_QUEUE); - - tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >> - IWLAGN_TX_RES_TID_POS; - sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >> - IWLAGN_TX_RES_RA_POS; - - spin_lock(&priv->sta_lock); - - if (is_agg) - iwl_rx_reply_tx_agg(priv, tx_resp); - - __skb_queue_head_init(&skbs); - - if (tx_resp->frame_count == 1) { - u16 next_reclaimed = le16_to_cpu(tx_resp->seq_ctl); - next_reclaimed = SEQ_TO_SN(next_reclaimed + 0x10); - - if (is_agg) { - /* If this is an aggregation queue, we can rely on the - * ssn since the wifi sequence number corresponds to - * the index in the TFD ring (%256). - * The seq_ctl is the sequence control of the packet - * to which this Tx response relates. But if there is a - * hole in the bitmap of the BA we received, this Tx - * response may allow to reclaim the hole and all the - * subsequent packets that were already acked. - * In that case, seq_ctl != ssn, and the next packet - * to be reclaimed will be ssn and not seq_ctl. - */ - next_reclaimed = ssn; - } - - if (tid != IWL_TID_NON_QOS) { - priv->tid_data[sta_id][tid].next_reclaimed = - next_reclaimed; - IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d", - next_reclaimed); - } - - /*we can free until ssn % q.n_bd not inclusive */ - WARN_ON(iwl_trans_reclaim(trans(priv), sta_id, tid, - txq_id, ssn, &skbs)); - iwlagn_check_ratid_empty(priv, sta_id, tid); - freed = 0; - - /* process frames */ - skb_queue_walk(&skbs, skb) { - hdr = (struct ieee80211_hdr *)skb->data; - - if (!ieee80211_is_data_qos(hdr->frame_control)) - priv->last_seq_ctl = tx_resp->seq_ctl; - - info = IEEE80211_SKB_CB(skb); - ctx = info->driver_data[0]; - kmem_cache_free(iwl_tx_cmd_pool, - (info->driver_data[1])); - - memset(&info->status, 0, sizeof(info->status)); - - if (status == TX_STATUS_FAIL_PASSIVE_NO_RX && - iwl_is_associated_ctx(ctx) && ctx->vif && - ctx->vif->type == NL80211_IFTYPE_STATION) { - /* block and stop all queues */ - priv->passive_no_rx = true; - IWL_DEBUG_TX_QUEUES(priv, "stop all queues: " - "passive channel"); - ieee80211_stop_queues(priv->hw); - - IWL_DEBUG_TX_REPLY(priv, - "TXQ %d status %s (0x%08x) " - "rate_n_flags 0x%x retries %d\n", - txq_id, - iwl_get_tx_fail_reason(status), - status, - le32_to_cpu(tx_resp->rate_n_flags), - tx_resp->failure_frame); - - IWL_DEBUG_TX_REPLY(priv, - "FrameCnt = %d, idx=%d\n", - tx_resp->frame_count, cmd_index); - } - - /* check if BAR is needed */ - if (is_agg && !iwl_is_tx_success(status)) - info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - iwlagn_set_tx_status(priv, IEEE80211_SKB_CB(skb), - tx_resp, is_agg); - if (!is_agg) - iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1); - - freed++; - } - - WARN_ON(!is_agg && freed != 1); - } - - iwl_check_abort_status(priv, tx_resp->frame_count, status); - spin_unlock(&priv->sta_lock); - - while (!skb_queue_empty(&skbs)) { - skb = __skb_dequeue(&skbs); - ieee80211_tx_status(priv->hw, skb); - } - - return 0; -} - -/** - * iwlagn_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA - * - * Handles block-acknowledge notification from device, which reports success - * of frames sent via aggregation. - */ -int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_compressed_ba_resp *ba_resp = (void *)pkt->data; - struct iwl_ht_agg *agg; - struct sk_buff_head reclaimed_skbs; - struct ieee80211_tx_info *info; - struct ieee80211_hdr *hdr; - struct sk_buff *skb; - int sta_id; - int tid; - int freed; - - /* "flow" corresponds to Tx queue */ - u16 scd_flow = le16_to_cpu(ba_resp->scd_flow); - - /* "ssn" is start of block-ack Tx window, corresponds to index - * (in Tx queue's circular buffer) of first TFD/frame in window */ - u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn); - - if (scd_flow >= cfg(priv)->base_params->num_of_queues) { - IWL_ERR(priv, - "BUG_ON scd_flow is bigger than number of queues\n"); - return 0; - } - - sta_id = ba_resp->sta_id; - tid = ba_resp->tid; - agg = &priv->tid_data[sta_id][tid].agg; - - spin_lock(&priv->sta_lock); - - if (unlikely(!agg->wait_for_ba)) { - if (unlikely(ba_resp->bitmap)) - IWL_ERR(priv, "Received BA when not expected\n"); - spin_unlock(&priv->sta_lock); - return 0; - } - - __skb_queue_head_init(&reclaimed_skbs); - - /* Release all TFDs before the SSN, i.e. all TFDs in front of - * block-ack window (we assume that they've been successfully - * transmitted ... if not, it's too late anyway). */ - if (iwl_trans_reclaim(trans(priv), sta_id, tid, scd_flow, - ba_resp_scd_ssn, &reclaimed_skbs)) { - spin_unlock(&priv->sta_lock); - return 0; - } - - IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, " - "sta_id = %d\n", - agg->wait_for_ba, - (u8 *) &ba_resp->sta_addr_lo32, - ba_resp->sta_id); - IWL_DEBUG_TX_REPLY(priv, "TID = %d, SeqCtl = %d, bitmap = 0x%llx, " - "scd_flow = %d, scd_ssn = %d\n", - ba_resp->tid, le16_to_cpu(ba_resp->seq_ctl), - (unsigned long long)le64_to_cpu(ba_resp->bitmap), - scd_flow, ba_resp_scd_ssn); - - /* Mark that the expected block-ack response arrived */ - agg->wait_for_ba = false; - - /* Sanity check values reported by uCode */ - if (ba_resp->txed_2_done > ba_resp->txed) { - IWL_DEBUG_TX_REPLY(priv, - "bogus sent(%d) and ack(%d) count\n", - ba_resp->txed, ba_resp->txed_2_done); - /* - * set txed_2_done = txed, - * so it won't impact rate scale - */ - ba_resp->txed = ba_resp->txed_2_done; - } - IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n", - ba_resp->txed, ba_resp->txed_2_done); - - priv->tid_data[sta_id][tid].next_reclaimed = ba_resp_scd_ssn; - - iwlagn_check_ratid_empty(priv, sta_id, tid); - freed = 0; - - skb_queue_walk(&reclaimed_skbs, skb) { - hdr = (struct ieee80211_hdr *)skb->data; - - if (ieee80211_is_data_qos(hdr->frame_control)) - freed++; - else - WARN_ON_ONCE(1); - - info = IEEE80211_SKB_CB(skb); - kmem_cache_free(iwl_tx_cmd_pool, (info->driver_data[1])); - - if (freed == 1) { - /* this is the first skb we deliver in this batch */ - /* put the rate scaling data there */ - info = IEEE80211_SKB_CB(skb); - memset(&info->status, 0, sizeof(info->status)); - info->flags |= IEEE80211_TX_STAT_ACK; - info->flags |= IEEE80211_TX_STAT_AMPDU; - info->status.ampdu_ack_len = ba_resp->txed_2_done; - info->status.ampdu_len = ba_resp->txed; - iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, - info); - } - } - - spin_unlock(&priv->sta_lock); - - while (!skb_queue_empty(&reclaimed_skbs)) { - skb = __skb_dequeue(&reclaimed_skbs); - ieee80211_tx_status(priv->hw, skb); - } - - return 0; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c deleted file mode 100644 index 2a9a16f9..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.c +++ /dev/null @@ -1,1636 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/mac80211.h> - -#include <asm/div64.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" -#include "iwl-shared.h" -#include "iwl-trans.h" -#include "iwl-op-mode.h" - -/****************************************************************************** - * - * module boiler plate - * - ******************************************************************************/ - -/* - * module name, copyright, version, etc. - */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" - -#ifdef CONFIG_IWLWIFI_DEBUG -#define VD "d" -#else -#define VD -#endif - -#define DRV_VERSION IWLWIFI_VERSION VD - - -MODULE_DESCRIPTION(DRV_DESCRIPTION); -MODULE_VERSION(DRV_VERSION); -MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("iwlagn"); - -void iwl_update_chain_flags(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - for_each_context(priv, ctx) { - iwlagn_set_rxon_chain(priv, ctx); - if (ctx->active.rx_chain != ctx->staging.rx_chain) - iwlagn_commit_rxon(priv, ctx); - } -} - -/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */ -static void iwl_set_beacon_tim(struct iwl_priv *priv, - struct iwl_tx_beacon_cmd *tx_beacon_cmd, - u8 *beacon, u32 frame_size) -{ - u16 tim_idx; - struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon; - - /* - * The index is relative to frame start but we start looking at the - * variable-length part of the beacon. - */ - tim_idx = mgmt->u.beacon.variable - beacon; - - /* Parse variable-length elements of beacon to find WLAN_EID_TIM */ - while ((tim_idx < (frame_size - 2)) && - (beacon[tim_idx] != WLAN_EID_TIM)) - tim_idx += beacon[tim_idx+1] + 2; - - /* If TIM field was found, set variables */ - if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) { - tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx); - tx_beacon_cmd->tim_size = beacon[tim_idx+1]; - } else - IWL_WARN(priv, "Unable to find TIM Element in beacon\n"); -} - -int iwlagn_send_beacon_cmd(struct iwl_priv *priv) -{ - struct iwl_tx_beacon_cmd *tx_beacon_cmd; - struct iwl_host_cmd cmd = { - .id = REPLY_TX_BEACON, - .flags = CMD_SYNC, - }; - struct ieee80211_tx_info *info; - u32 frame_size; - u32 rate_flags; - u32 rate; - - /* - * We have to set up the TX command, the TX Beacon command, and the - * beacon contents. - */ - - lockdep_assert_held(&priv->mutex); - - if (!priv->beacon_ctx) { - IWL_ERR(priv, "trying to build beacon w/o beacon context!\n"); - return 0; - } - - if (WARN_ON(!priv->beacon_skb)) - return -EINVAL; - - /* Allocate beacon command */ - if (!priv->beacon_cmd) - priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL); - tx_beacon_cmd = priv->beacon_cmd; - if (!tx_beacon_cmd) - return -ENOMEM; - - frame_size = priv->beacon_skb->len; - - /* Set up TX command fields */ - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK; - - /* Set up TX beacon command fields */ - iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data, - frame_size); - - /* Set up packet rate and flags */ - info = IEEE80211_SKB_CB(priv->beacon_skb); - - /* - * Let's set up the rate at least somewhat correctly; - * it will currently not actually be used by the uCode, - * it uses the broadcast station's rate instead. - */ - if (info->control.rates[0].idx < 0 || - info->control.rates[0].flags & IEEE80211_TX_RC_MCS) - rate = 0; - else - rate = info->control.rates[0].idx; - - priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, - hw_params(priv).valid_tx_ant); - rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant); - - /* In mac80211, rates for 5 GHz start at 0 */ - if (info->band == IEEE80211_BAND_5GHZ) - rate += IWL_FIRST_OFDM_RATE; - else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE) - rate_flags |= RATE_MCS_CCK_MSK; - - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, rate_flags); - - /* Submit command */ - cmd.len[0] = sizeof(*tx_beacon_cmd); - cmd.data[0] = tx_beacon_cmd; - cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - cmd.len[1] = frame_size; - cmd.data[1] = priv->beacon_skb->data; - cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY; - - return iwl_dvm_send_cmd(priv, &cmd); -} - -static void iwl_bg_beacon_update(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, beacon_update); - struct sk_buff *beacon; - - mutex_lock(&priv->mutex); - if (!priv->beacon_ctx) { - IWL_ERR(priv, "updating beacon w/o beacon context!\n"); - goto out; - } - - if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) { - /* - * The ucode will send beacon notifications even in - * IBSS mode, but we don't want to process them. But - * we need to defer the type check to here due to - * requiring locking around the beacon_ctx access. - */ - goto out; - } - - /* Pull updated AP beacon from mac80211. will fail if not in AP mode */ - beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif); - if (!beacon) { - IWL_ERR(priv, "update beacon failed -- keeping old\n"); - goto out; - } - - /* new beacon skb is allocated every time; dispose previous.*/ - dev_kfree_skb(priv->beacon_skb); - - priv->beacon_skb = beacon; - - iwlagn_send_beacon_cmd(priv); - out: - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_bt_runtime_config(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_runtime_config); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - iwlagn_send_advance_bt_config(priv); -} - -static void iwl_bg_bt_full_concurrency(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, bt_full_concurrency); - struct iwl_rxon_context *ctx; - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - goto out; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - goto out; - - IWL_DEBUG_INFO(priv, "BT coex in %s mode\n", - priv->bt_full_concurrent ? - "full concurrency" : "3-wire"); - - /* - * LQ & RXON updated cmds must be sent before BT Config cmd - * to avoid 3-wire collisions - */ - for_each_context(priv, ctx) { - iwlagn_set_rxon_chain(priv, ctx); - iwlagn_commit_rxon(priv, ctx); - } - - iwlagn_send_advance_bt_config(priv); -out: - mutex_unlock(&priv->mutex); -} - -/** - * iwl_bg_statistics_periodic - Timer callback to queue statistics - * - * This callback is provided in order to send a statistics request. - * - * This timer function is continually reset to execute within - * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION - * was received. We need to ensure we receive the statistics in order - * to update the temperature used for calibrating the TXPOWER. - */ -static void iwl_bg_statistics_periodic(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* dont send host command if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - iwl_send_statistics_request(priv, CMD_ASYNC, false); -} - - -static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, - u32 start_idx, u32 num_events, - u32 capacity, u32 mode) -{ - u32 i; - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (mode == 0) - ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32)); - else - ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32)); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&trans(priv)->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(trans(priv)))) { - spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags); - return; - } - - /* Set starting address; reads will auto-increment */ - iwl_write32(trans(priv), HBUS_TARG_MEM_RADDR, ptr); - - /* - * Refuse to read more than would have fit into the log from - * the current start_idx. This used to happen due to the race - * described below, but now WARN because the code below should - * prevent it from happening here. - */ - if (WARN_ON(num_events > capacity - start_idx)) - num_events = capacity - start_idx; - - /* - * "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. - */ - for (i = 0; i < num_events; i++) { - ev = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - time = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - if (mode == 0) { - trace_iwlwifi_dev_ucode_cont_event( - trans(priv)->dev, 0, time, ev); - } else { - data = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - trace_iwlwifi_dev_ucode_cont_event( - trans(priv)->dev, time, data, ev); - } - } - /* Allow device to power down */ - iwl_release_nic_access(trans(priv)); - spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags); -} - -static void iwl_continuous_event_trace(struct iwl_priv *priv) -{ - u32 capacity; /* event log capacity in # entries */ - struct { - u32 capacity; - u32 mode; - u32 wrap_counter; - u32 write_counter; - } __packed read; - u32 base; /* SRAM byte address of event log header */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - - base = priv->shrd->device_pointers.log_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - iwl_read_targ_mem_words(trans(priv), base, &read, sizeof(read)); - - capacity = read.capacity; - mode = read.mode; - num_wraps = read.wrap_counter; - next_entry = read.write_counter; - } else - return; - - /* - * Unfortunately, the uCode doesn't use temporary variables. - * Therefore, it can happen that we read next_entry == capacity, - * which really means next_entry == 0. - */ - if (unlikely(next_entry == capacity)) - next_entry = 0; - /* - * Additionally, the uCode increases the write pointer before - * the wraps counter, so if the write pointer is smaller than - * the old write pointer (wrap occurred) but we read that no - * wrap occurred, we actually read between the next_entry and - * num_wraps update (this does happen in practice!!) -- take - * that into account by increasing num_wraps. - */ - if (unlikely(next_entry < priv->event_log.next_entry && - num_wraps == priv->event_log.num_wraps)) - num_wraps++; - - if (num_wraps == priv->event_log.num_wraps) { - iwl_print_cont_event_trace( - priv, base, priv->event_log.next_entry, - next_entry - priv->event_log.next_entry, - capacity, mode); - - priv->event_log.non_wraps_count++; - } else { - if (num_wraps - priv->event_log.num_wraps > 1) - priv->event_log.wraps_more_count++; - else - priv->event_log.wraps_once_count++; - - trace_iwlwifi_dev_ucode_wrap_event(trans(priv)->dev, - num_wraps - priv->event_log.num_wraps, - next_entry, priv->event_log.next_entry); - - if (next_entry < priv->event_log.next_entry) { - iwl_print_cont_event_trace( - priv, base, priv->event_log.next_entry, - capacity - priv->event_log.next_entry, - capacity, mode); - - iwl_print_cont_event_trace( - priv, base, 0, next_entry, capacity, mode); - } else { - iwl_print_cont_event_trace( - priv, base, next_entry, - capacity - next_entry, - capacity, mode); - - iwl_print_cont_event_trace( - priv, base, 0, next_entry, capacity, mode); - } - } - - priv->event_log.num_wraps = num_wraps; - priv->event_log.next_entry = next_entry; -} - -/** - * iwl_bg_ucode_trace - Timer callback to log ucode event - * - * The timer is continually set to execute every - * UCODE_TRACE_PERIOD milliseconds after the last timer expired - * this function is to perform continuous uCode event logging operation - * if enabled - */ -static void iwl_bg_ucode_trace(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (priv->event_log.ucode_trace) { - iwl_continuous_event_trace(priv); - /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */ - mod_timer(&priv->ucode_trace, - jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD)); - } -} - -static void iwl_bg_tx_flush(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, tx_flush); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - /* do nothing if rf-kill is on */ - if (!iwl_is_ready_rf(priv)) - return; - - IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n"); - iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); -} - -static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags) -{ - int i; - - /* - * The default context is always valid, - * the PAN context depends on uCode. - */ - priv->shrd->valid_contexts = BIT(IWL_RXON_CTX_BSS); - if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) - priv->shrd->valid_contexts |= BIT(IWL_RXON_CTX_PAN); - - for (i = 0; i < NUM_IWL_RXON_CTX; i++) - priv->contexts[i].ctxid = i; - - priv->contexts[IWL_RXON_CTX_BSS].always_active = true; - priv->contexts[IWL_RXON_CTX_BSS].is_active = true; - priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON; - priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID; - priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY; - priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID; - priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes = - BIT(NL80211_IFTYPE_ADHOC); - priv->contexts[IWL_RXON_CTX_BSS].interface_modes = - BIT(NL80211_IFTYPE_STATION); - priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP; - priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS; - priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS; - priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS; - - priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON; - priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd = - REPLY_WIPAN_RXON_TIMING; - priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd = - REPLY_WIPAN_RXON_ASSOC; - priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM; - priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN; - priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY; - priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID; - priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION; - priv->contexts[IWL_RXON_CTX_PAN].interface_modes = - BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP); - - if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P) - priv->contexts[IWL_RXON_CTX_PAN].interface_modes |= - BIT(NL80211_IFTYPE_P2P_CLIENT) | - BIT(NL80211_IFTYPE_P2P_GO); - - priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP; - priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA; - priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P; - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); -} - -static void iwl_rf_kill_ct_config(struct iwl_priv *priv) -{ - struct iwl_ct_kill_config cmd; - struct iwl_ct_kill_throttling_config adv_cmd; - int ret = 0; - - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); - - priv->thermal_throttle.ct_kill_toggle = false; - - if (cfg(priv)->base_params->support_ct_kill_exit) { - adv_cmd.critical_temperature_enter = - cpu_to_le32(hw_params(priv).ct_kill_threshold); - adv_cmd.critical_temperature_exit = - cpu_to_le32(hw_params(priv).ct_kill_exit_threshold); - - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_CT_KILL_CONFIG_CMD, - CMD_SYNC, sizeof(adv_cmd), &adv_cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, critical temperature enter is %d," - "exit is %d\n", - hw_params(priv).ct_kill_threshold, - hw_params(priv).ct_kill_exit_threshold); - } else { - cmd.critical_temperature_R = - cpu_to_le32(hw_params(priv).ct_kill_threshold); - - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_CT_KILL_CONFIG_CMD, - CMD_SYNC, sizeof(cmd), &cmd); - if (ret) - IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); - else - IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " - "succeeded, " - "critical temperature is %d\n", - hw_params(priv).ct_kill_threshold); - } -} - -static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg) -{ - struct iwl_calib_cfg_cmd calib_cfg_cmd; - struct iwl_host_cmd cmd = { - .id = CALIBRATION_CFG_CMD, - .len = { sizeof(struct iwl_calib_cfg_cmd), }, - .data = { &calib_cfg_cmd, }, - }; - - memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); - calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg); - - return iwl_dvm_send_cmd(priv, &cmd); -} - - -static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant) -{ - struct iwl_tx_ant_config_cmd tx_ant_cmd = { - .valid = cpu_to_le32(valid_tx_ant), - }; - - if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) { - IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant); - return iwl_dvm_send_cmd_pdu(priv, - TX_ANT_CONFIGURATION_CMD, - CMD_SYNC, - sizeof(struct iwl_tx_ant_config_cmd), - &tx_ant_cmd); - } else { - IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n"); - return -EOPNOTSUPP; - } -} - -/** - * iwl_alive_start - called after REPLY_ALIVE notification received - * from protocol/runtime uCode (initialization uCode's - * Alive gets handled by iwl_init_alive_start()). - */ -int iwl_alive_start(struct iwl_priv *priv) -{ - int ret = 0; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - IWL_DEBUG_INFO(priv, "Runtime Alive received.\n"); - - /* After the ALIVE response, we can send host commands to the uCode */ - set_bit(STATUS_ALIVE, &priv->status); - - /* Enable watchdog to monitor the driver tx queues */ - iwl_setup_watchdog(priv); - - if (iwl_is_rfkill(priv)) - return -ERFKILL; - - if (priv->event_log.ucode_trace) { - /* start collecting data now */ - mod_timer(&priv->ucode_trace, jiffies); - } - - /* download priority table before any calibration request */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - /* Configure Bluetooth device coexistence support */ - if (cfg(priv)->bt_params->bt_sco_disable) - priv->bt_enable_pspoll = false; - else - priv->bt_enable_pspoll = true; - - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - iwlagn_send_advance_bt_config(priv); - priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS; - priv->cur_rssi_ctx = NULL; - - iwl_send_prio_tbl(priv); - - /* FIXME: w/a to force change uCode BT state machine */ - ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - } else { - /* - * default is 2-wire BT coexexistence support - */ - iwl_send_bt_config(priv); - } - - /* - * Perform runtime calibrations, including DC calibration. - */ - iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX); - - ieee80211_wake_queues(priv->hw); - - priv->active_rate = IWL_RATES_MASK; - - /* Configure Tx antenna selection based on H/W config */ - iwlagn_send_tx_ant_config(priv, hw_params(priv).valid_tx_ant); - - if (iwl_is_associated_ctx(ctx) && !priv->wowlan) { - struct iwl_rxon_cmd *active_rxon = - (struct iwl_rxon_cmd *)&ctx->active; - /* apply any changes in staging */ - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; - active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; - } else { - struct iwl_rxon_context *tmp; - /* Initialize our rx_config data */ - for_each_context(priv, tmp) - iwl_connection_init_rx_config(priv, tmp); - - iwlagn_set_rxon_chain(priv, ctx); - } - - if (!priv->wowlan) { - /* WoWLAN ucode will not reply in the same way, skip it */ - iwl_reset_run_time_calib(priv); - } - - set_bit(STATUS_READY, &priv->status); - - /* Configure the adapter for unassociated operation */ - ret = iwlagn_commit_rxon(priv, ctx); - if (ret) - return ret; - - /* At this point, the NIC is initialized and operational */ - iwl_rf_kill_ct_config(priv); - - IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n"); - - return iwl_power_update_mode(priv, true); -} - -/** - * iwl_clear_driver_stations - clear knowledge of all stations from driver - * @priv: iwl priv struct - * - * This is called during iwl_down() to make sure that in the case - * we're coming there from a hardware restart mac80211 will be - * able to reconfigure stations -- if we're getting there in the - * normal down flow then the stations will already be cleared. - */ -static void iwl_clear_driver_stations(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - - spin_lock_bh(&priv->sta_lock); - memset(priv->stations, 0, sizeof(priv->stations)); - priv->num_stations = 0; - - priv->ucode_key_table = 0; - - for_each_context(priv, ctx) { - /* - * Remove all key information that is not stored as part - * of station information since mac80211 may not have had - * a chance to remove all the keys. When device is - * reconfigured by mac80211 after an error all keys will - * be reconfigured. - */ - memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys)); - ctx->key_mapping_keys = 0; - } - - spin_unlock_bh(&priv->sta_lock); -} - -void iwl_down(struct iwl_priv *priv) -{ - int exit_pending; - - IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n"); - - lockdep_assert_held(&priv->mutex); - - iwl_scan_cancel_timeout(priv, 200); - - /* - * If active, scanning won't cancel it, so say it expired. - * No race since we hold the mutex here and a new one - * can't come in at this time. - */ - ieee80211_remain_on_channel_expired(priv->hw); - - exit_pending = - test_and_set_bit(STATUS_EXIT_PENDING, &priv->status); - - /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set - * to prevent rearm timer */ - del_timer_sync(&priv->watchdog); - - iwl_clear_ucode_stations(priv, NULL); - iwl_dealloc_bcast_stations(priv); - iwl_clear_driver_stations(priv); - - /* reset BT coex data */ - priv->bt_status = 0; - priv->cur_rssi_ctx = NULL; - priv->bt_is_sco = 0; - if (cfg(priv)->bt_params) - priv->bt_traffic_load = - cfg(priv)->bt_params->bt_init_traffic_load; - else - priv->bt_traffic_load = 0; - priv->bt_full_concurrent = false; - priv->bt_ci_compliance = 0; - - /* Wipe out the EXIT_PENDING status bit if we are not actually - * exiting the module */ - if (!exit_pending) - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - if (priv->mac80211_registered) - ieee80211_stop_queues(priv->hw); - - priv->ucode_loaded = false; - iwl_trans_stop_device(trans(priv)); - - /* Clear out all status bits but a few that are stable across reset */ - priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) << - STATUS_RF_KILL_HW | - test_bit(STATUS_GEO_CONFIGURED, &priv->status) << - STATUS_GEO_CONFIGURED | - test_bit(STATUS_EXIT_PENDING, &priv->status) << - STATUS_EXIT_PENDING; - priv->shrd->status &= - test_bit(STATUS_FW_ERROR, &priv->shrd->status) << - STATUS_FW_ERROR; - - dev_kfree_skb(priv->beacon_skb); - priv->beacon_skb = NULL; -} - -/***************************************************************************** - * - * Workqueue callbacks - * - *****************************************************************************/ - -static void iwl_bg_run_time_calib_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - run_time_calib_work); - - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) { - mutex_unlock(&priv->mutex); - return; - } - - if (priv->start_calib) { - iwl_chain_noise_calibration(priv); - iwl_sensitivity_calibration(priv); - } - - mutex_unlock(&priv->mutex); -} - -void iwlagn_prepare_restart(struct iwl_priv *priv) -{ - bool bt_full_concurrent; - u8 bt_ci_compliance; - u8 bt_load; - u8 bt_status; - bool bt_is_sco; - - lockdep_assert_held(&priv->mutex); - - priv->is_open = 0; - - /* - * __iwl_down() will clear the BT status variables, - * which is correct, but when we restart we really - * want to keep them so restore them afterwards. - * - * The restart process will later pick them up and - * re-configure the hw when we reconfigure the BT - * command. - */ - bt_full_concurrent = priv->bt_full_concurrent; - bt_ci_compliance = priv->bt_ci_compliance; - bt_load = priv->bt_traffic_load; - bt_status = priv->bt_status; - bt_is_sco = priv->bt_is_sco; - - iwl_down(priv); - - priv->bt_full_concurrent = bt_full_concurrent; - priv->bt_ci_compliance = bt_ci_compliance; - priv->bt_traffic_load = bt_load; - priv->bt_status = bt_status; - priv->bt_is_sco = bt_is_sco; -} - -static void iwl_bg_restart(struct work_struct *data) -{ - struct iwl_priv *priv = container_of(data, struct iwl_priv, restart); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) { - mutex_lock(&priv->mutex); - iwlagn_prepare_restart(priv); - mutex_unlock(&priv->mutex); - iwl_cancel_deferred_work(priv); - ieee80211_restart_hw(priv->hw); - } else { - WARN_ON(1); - } -} - - - - -void iwlagn_disable_roc(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; - - lockdep_assert_held(&priv->mutex); - - if (!priv->hw_roc_setup) - return; - - ctx->staging.dev_type = RXON_DEV_TYPE_P2P; - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; - - priv->hw_roc_channel = NULL; - - memset(ctx->staging.node_addr, 0, ETH_ALEN); - - iwlagn_commit_rxon(priv, ctx); - - ctx->is_active = false; - priv->hw_roc_setup = false; -} - -static void iwlagn_disable_roc_work(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, - hw_roc_disable_work.work); - - mutex_lock(&priv->mutex); - iwlagn_disable_roc(priv); - mutex_unlock(&priv->mutex); -} - -/***************************************************************************** - * - * driver setup and teardown - * - *****************************************************************************/ - -static void iwl_setup_deferred_work(struct iwl_priv *priv) -{ - priv->workqueue = create_singlethread_workqueue(DRV_NAME); - - INIT_WORK(&priv->restart, iwl_bg_restart); - INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update); - INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work); - INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush); - INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency); - INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config); - INIT_DELAYED_WORK(&priv->hw_roc_disable_work, - iwlagn_disable_roc_work); - - iwl_setup_scan_deferred_work(priv); - - if (cfg(priv)->bt_params) - iwlagn_bt_setup_deferred_work(priv); - - init_timer(&priv->statistics_periodic); - priv->statistics_periodic.data = (unsigned long)priv; - priv->statistics_periodic.function = iwl_bg_statistics_periodic; - - init_timer(&priv->ucode_trace); - priv->ucode_trace.data = (unsigned long)priv; - priv->ucode_trace.function = iwl_bg_ucode_trace; - - init_timer(&priv->watchdog); - priv->watchdog.data = (unsigned long)priv; - priv->watchdog.function = iwl_bg_watchdog; -} - -void iwl_cancel_deferred_work(struct iwl_priv *priv) -{ - if (cfg(priv)->bt_params) - iwlagn_bt_cancel_deferred_work(priv); - - cancel_work_sync(&priv->run_time_calib_work); - cancel_work_sync(&priv->beacon_update); - - iwl_cancel_scan_deferred_work(priv); - - cancel_work_sync(&priv->bt_full_concurrency); - cancel_work_sync(&priv->bt_runtime_config); - cancel_delayed_work_sync(&priv->hw_roc_disable_work); - - del_timer_sync(&priv->statistics_periodic); - del_timer_sync(&priv->ucode_trace); -} - -static void iwl_init_hw_rates(struct ieee80211_rate *rates) -{ - int i; - - for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { - rates[i].bitrate = iwl_rates[i].ieee * 5; - rates[i].hw_value = i; /* Rate scaling will work on indexes */ - rates[i].hw_value_short = i; - rates[i].flags = 0; - if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { - /* - * If CCK != 1M then set short preamble rate flag. - */ - rates[i].flags |= - (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? - 0 : IEEE80211_RATE_SHORT_PREAMBLE; - } - } -} - -static int iwl_init_drv(struct iwl_priv *priv) -{ - int ret; - - spin_lock_init(&priv->sta_lock); - - mutex_init(&priv->mutex); - - INIT_LIST_HEAD(&priv->calib_results); - - priv->ieee_channels = NULL; - priv->ieee_rates = NULL; - priv->band = IEEE80211_BAND_2GHZ; - - priv->plcp_delta_threshold = - cfg(priv)->base_params->plcp_delta_threshold; - - priv->iw_mode = NL80211_IFTYPE_STATION; - priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; - priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF; - priv->agg_tids_count = 0; - - priv->ucode_owner = IWL_OWNERSHIP_DRIVER; - - /* initialize force reset */ - priv->force_reset[IWL_RF_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_RF_RESET; - priv->force_reset[IWL_FW_RESET].reset_duration = - IWL_DELAY_NEXT_FORCE_FW_RELOAD; - - priv->rx_statistics_jiffies = jiffies; - - /* Choose which receivers/antennas to use */ - iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]); - - iwl_init_scan_params(priv); - - /* init bt coex */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; - priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; - priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; - priv->bt_on_thresh = BT_ON_THRESHOLD_DEF; - priv->bt_duration = BT_DURATION_LIMIT_DEF; - priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF; - } - - ret = iwl_init_channel_map(priv); - if (ret) { - IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); - goto err; - } - - ret = iwl_init_geos(priv); - if (ret) { - IWL_ERR(priv, "initializing geos failed: %d\n", ret); - goto err_free_channel_map; - } - iwl_init_hw_rates(priv->ieee_rates); - - return 0; - -err_free_channel_map: - iwl_free_channel_map(priv); -err: - return ret; -} - -static void iwl_uninit_drv(struct iwl_priv *priv) -{ - iwl_free_geos(priv); - iwl_free_channel_map(priv); - kfree(priv->scan_cmd); - kfree(priv->beacon_cmd); - kfree(rcu_dereference_raw(priv->noa_data)); - iwl_calib_free_results(priv); -#ifdef CONFIG_IWLWIFI_DEBUGFS - kfree(priv->wowlan_sram); -#endif -} - -/* Size of one Rx buffer in host DRAM */ -#define IWL_RX_BUF_SIZE_4K (4 * 1024) -#define IWL_RX_BUF_SIZE_8K (8 * 1024) - -static void iwl_set_hw_params(struct iwl_priv *priv) -{ - if (cfg(priv)->ht_params) - hw_params(priv).use_rts_for_aggregation = - cfg(priv)->ht_params->use_rts_for_aggregation; - - if (iwlagn_mod_params.amsdu_size_8K) - hw_params(priv).rx_page_order = - get_order(IWL_RX_BUF_SIZE_8K); - else - hw_params(priv).rx_page_order = - get_order(IWL_RX_BUF_SIZE_4K); - - if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_ALL) - hw_params(priv).sku &= ~EEPROM_SKU_CAP_11N_ENABLE; - - hw_params(priv).num_ampdu_queues = - cfg(priv)->base_params->num_of_ampdu_queues; - hw_params(priv).wd_timeout = cfg(priv)->base_params->wd_timeout; - - /* Device-specific setup */ - cfg(priv)->lib->set_hw_params(priv); -} - - - -static void iwl_debug_config(struct iwl_priv *priv) -{ - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUG " -#ifdef CONFIG_IWLWIFI_DEBUG - "enabled\n"); -#else - "disabled\n"); -#endif - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUGFS " -#ifdef CONFIG_IWLWIFI_DEBUGFS - "enabled\n"); -#else - "disabled\n"); -#endif - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TRACING " -#ifdef CONFIG_IWLWIFI_DEVICE_TRACING - "enabled\n"); -#else - "disabled\n"); -#endif - - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TESTMODE " -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE - "enabled\n"); -#else - "disabled\n"); -#endif - dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_P2P " -#ifdef CONFIG_IWLWIFI_P2P - "enabled\n"); -#else - "disabled\n"); -#endif -} - -static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, - const struct iwl_fw *fw) -{ - int err = 0; - struct iwl_priv *priv; - struct ieee80211_hw *hw; - struct iwl_op_mode *op_mode; - u16 num_mac; - u32 ucode_flags; - struct iwl_trans_config trans_cfg; - static const u8 no_reclaim_cmds[] = { - REPLY_RX_PHY_CMD, - REPLY_RX, - REPLY_RX_MPDU_CMD, - REPLY_COMPRESSED_BA, - STATISTICS_NOTIFICATION, - REPLY_TX, - }; - - /************************ - * 1. Allocating HW data - ************************/ - hw = iwl_alloc_all(); - if (!hw) { - pr_err("%s: Cannot allocate network device\n", - cfg(trans)->name); - err = -ENOMEM; - goto out; - } - - op_mode = hw->priv; - op_mode->ops = &iwl_dvm_ops; - priv = IWL_OP_MODE_GET_DVM(op_mode); - priv->shrd = trans->shrd; - priv->fw = fw; - /* TODO: remove fw from shared data later */ - priv->shrd->fw = fw; - - /* - * Populate the state variables that the transport layer needs - * to know about. - */ - trans_cfg.op_mode = op_mode; - trans_cfg.no_reclaim_cmds = no_reclaim_cmds; - trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds); - - ucode_flags = fw->ucode_capa.flags; - -#ifndef CONFIG_IWLWIFI_P2P - ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; -#endif - - if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) { - priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN; - trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM; - } else { - priv->sta_key_max_num = STA_KEY_MAX_NUM; - trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; - } - - /* Configure transport layer */ - iwl_trans_configure(trans(priv), &trans_cfg); - - /* At this point both hw and priv are allocated. */ - - SET_IEEE80211_DEV(priv->hw, trans(priv)->dev); - - /* show what debugging capabilities we have */ - iwl_debug_config(priv); - - IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n"); - - /* is antenna coupling more than 35dB ? */ - priv->bt_ant_couple_ok = - (iwlagn_mod_params.ant_coupling > - IWL_BT_ANTENNA_COUPLING_THRESHOLD) ? - true : false; - - /* enable/disable bt channel inhibition */ - priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce; - IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n", - (priv->bt_ch_announce) ? "On" : "Off"); - - if (iwl_alloc_traffic_mem(priv)) - IWL_ERR(priv, "Not enough memory to generate traffic log\n"); - - /* these spin locks will be used in apm_ops.init and EEPROM access - * we should init now - */ - spin_lock_init(&trans(priv)->reg_lock); - spin_lock_init(&priv->statistics.lock); - - /*********************** - * 2. Read REV register - ***********************/ - IWL_INFO(priv, "Detected %s, REV=0x%X\n", - cfg(priv)->name, trans(priv)->hw_rev); - - err = iwl_trans_start_hw(trans(priv)); - if (err) - goto out_free_traffic_mem; - - /***************** - * 3. Read EEPROM - *****************/ - err = iwl_eeprom_init(trans(priv), trans(priv)->hw_rev); - /* Reset chip to save power until we load uCode during "up". */ - iwl_trans_stop_hw(trans(priv)); - if (err) { - IWL_ERR(priv, "Unable to init EEPROM\n"); - goto out_free_traffic_mem; - } - err = iwl_eeprom_check_version(priv); - if (err) - goto out_free_eeprom; - - err = iwl_eeprom_init_hw_params(priv); - if (err) - goto out_free_eeprom; - - /* extract MAC Address */ - iwl_eeprom_get_mac(priv->shrd, priv->addresses[0].addr); - IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr); - priv->hw->wiphy->addresses = priv->addresses; - priv->hw->wiphy->n_addresses = 1; - num_mac = iwl_eeprom_query16(priv->shrd, EEPROM_NUM_MAC_ADDRESS); - if (num_mac > 1) { - memcpy(priv->addresses[1].addr, priv->addresses[0].addr, - ETH_ALEN); - priv->addresses[1].addr[5]++; - priv->hw->wiphy->n_addresses++; - } - - /************************ - * 4. Setup HW constants - ************************/ - iwl_set_hw_params(priv); - - if (!(hw_params(priv).sku & EEPROM_SKU_CAP_IPAN_ENABLE)) { - IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN"); - ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; - /* - * if not PAN, then don't support P2P -- might be a uCode - * packaging bug or due to the eeprom check above - */ - ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P; - priv->sta_key_max_num = STA_KEY_MAX_NUM; - trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM; - - /* Configure transport layer again*/ - iwl_trans_configure(trans(priv), &trans_cfg); - } - - /******************* - * 5. Setup priv - *******************/ - - err = iwl_init_drv(priv); - if (err) - goto out_free_eeprom; - /* At this point both hw and priv are initialized. */ - - /******************** - * 6. Setup services - ********************/ - iwl_setup_deferred_work(priv); - iwl_setup_rx_handlers(priv); - iwl_testmode_init(priv); - - iwl_power_initialize(priv); - iwl_tt_initialize(priv); - - snprintf(priv->hw->wiphy->fw_version, - sizeof(priv->hw->wiphy->fw_version), - "%s", fw->fw_version); - - priv->new_scan_threshold_behaviour = - !!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN); - - priv->phy_calib_chain_noise_reset_cmd = - fw->ucode_capa.standard_phy_calibration_size; - priv->phy_calib_chain_noise_gain_cmd = - fw->ucode_capa.standard_phy_calibration_size + 1; - - /* initialize all valid contexts */ - iwl_init_context(priv, ucode_flags); - - /************************************************** - * This is still part of probe() in a sense... - * - * 7. Setup and register with mac80211 and debugfs - **************************************************/ - err = iwlagn_mac_setup_register(priv, &fw->ucode_capa); - if (err) - goto out_destroy_workqueue; - - err = iwl_dbgfs_register(priv, DRV_NAME); - if (err) - IWL_ERR(priv, - "failed to create debugfs files. Ignoring error: %d\n", - err); - - return op_mode; - -out_destroy_workqueue: - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_uninit_drv(priv); -out_free_eeprom: - iwl_eeprom_free(priv->shrd); -out_free_traffic_mem: - iwl_free_traffic_mem(priv); - ieee80211_free_hw(priv->hw); -out: - op_mode = NULL; - return op_mode; -} - -static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n"); - - iwl_dbgfs_unregister(priv); - - iwl_testmode_cleanup(priv); - iwlagn_mac_unregister(priv); - - iwl_tt_exit(priv); - - /*This will stop the queues, move the device to low power state */ - priv->ucode_loaded = false; - iwl_trans_stop_device(trans(priv)); - - iwl_eeprom_free(priv->shrd); - - /*netif_stop_queue(dev); */ - flush_workqueue(priv->workqueue); - - /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes - * priv->workqueue... so we can't take down the workqueue - * until now... */ - destroy_workqueue(priv->workqueue); - priv->workqueue = NULL; - iwl_free_traffic_mem(priv); - - iwl_uninit_drv(priv); - - dev_kfree_skb(priv->beacon_skb); - - ieee80211_free_hw(priv->hw); -} - -static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - if (!iwl_check_for_ct_kill(priv)) { - IWL_ERR(priv, "Restarting adapter queue is full\n"); - iwl_nic_error(op_mode); - } -} - -static void iwl_nic_config(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - cfg(priv)->lib->nic_config(priv); -} - -static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, u8 ac) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - set_bit(ac, &priv->transport_queue_stop); - ieee80211_stop_queue(priv->hw, ac); -} - -static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, u8 ac) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - clear_bit(ac, &priv->transport_queue_stop); - - if (!priv->passive_no_rx) - ieee80211_wake_queue(priv->hw, ac); -} - -void iwlagn_lift_passive_no_rx(struct iwl_priv *priv) -{ - int ac; - - if (!priv->passive_no_rx) - return; - - for (ac = IEEE80211_AC_VO; ac < IEEE80211_NUM_ACS; ac++) { - if (!test_bit(ac, &priv->transport_queue_stop)) { - IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d"); - ieee80211_wake_queue(priv->hw, ac); - } else { - IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d"); - } - } - - priv->passive_no_rx = false; -} - -const struct iwl_op_mode_ops iwl_dvm_ops = { - .start = iwl_op_mode_dvm_start, - .stop = iwl_op_mode_dvm_stop, - .rx = iwl_rx_dispatch, - .queue_full = iwl_stop_sw_queue, - .queue_not_full = iwl_wake_sw_queue, - .hw_rf_kill = iwl_set_hw_rfkill_state, - .free_skb = iwl_free_skb, - .nic_error = iwl_nic_error, - .cmd_queue_full = iwl_cmd_queue_full, - .nic_config = iwl_nic_config, -}; - -/***************************************************************************** - * - * driver and module entry point - * - *****************************************************************************/ - -struct kmem_cache *iwl_tx_cmd_pool; - -static int __init iwl_init(void) -{ - - int ret; - pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n"); - pr_info(DRV_COPYRIGHT "\n"); - - iwl_tx_cmd_pool = kmem_cache_create("iwl_dev_cmd", - sizeof(struct iwl_device_cmd), - sizeof(void *), 0, NULL); - if (!iwl_tx_cmd_pool) - return -ENOMEM; - - ret = iwlagn_rate_control_register(); - if (ret) { - pr_err("Unable to register rate control algorithm: %d\n", ret); - goto error_rc_register; - } - - ret = iwl_pci_register_driver(); - if (ret) - goto error_pci_register; - return ret; - -error_pci_register: - iwlagn_rate_control_unregister(); -error_rc_register: - kmem_cache_destroy(iwl_tx_cmd_pool); - return ret; -} - -static void __exit iwl_exit(void) -{ - iwl_pci_unregister_driver(); - iwlagn_rate_control_unregister(); - kmem_cache_destroy(iwl_tx_cmd_pool); -} - -module_exit(iwl_exit); -module_init(iwl_init); - -#ifdef CONFIG_IWLWIFI_DEBUG -module_param_named(debug, iwlagn_mod_params.debug_level, uint, - S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "debug output mask"); -#endif - -module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); -module_param_named(11n_disable, iwlagn_mod_params.disable_11n, uint, S_IRUGO); -MODULE_PARM_DESC(11n_disable, - "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX"); -module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K, - int, S_IRUGO); -MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size"); -module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO); -MODULE_PARM_DESC(fw_restart, "restart firmware in case of error"); - -module_param_named(ucode_alternative, - iwlagn_mod_params.wanted_ucode_alternative, - int, S_IRUGO); -MODULE_PARM_DESC(ucode_alternative, - "specify ucode alternative to use from ucode file"); - -module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling, - int, S_IRUGO); -MODULE_PARM_DESC(antenna_coupling, - "specify antenna coupling in dB (defualt: 0 dB)"); - -module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce, - bool, S_IRUGO); -MODULE_PARM_DESC(bt_ch_inhibition, - "Enable BT channel inhibition (default: enable)"); - -module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO); -MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])"); - -module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO); -MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])"); - -module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO); -MODULE_PARM_DESC(wd_disable, - "Disable stuck queue watchdog timer 0=system default, " - "1=disable, 2=enable (default: 0)"); - -/* - * set bt_coex_active to true, uCode will do kill/defer - * every time the priority line is asserted (BT is sending signals on the - * priority line in the PCIx). - * set bt_coex_active to false, uCode will ignore the BT activity and - * perform the normal operation - * - * User might experience transmit issue on some platform due to WiFi/BT - * co-exist problem. The possible behaviors are: - * Able to scan and finding all the available AP - * Not able to associate with any AP - * On those platforms, WiFi communication can be restored by set - * "bt_coex_active" module parameter to "false" - * - * default: bt_coex_active = true (BT_COEX_ENABLE) - */ -module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active, - bool, S_IRUGO); -MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)"); - -module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO); -MODULE_PARM_DESC(led_mode, "0=system default, " - "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)"); - -module_param_named(power_save, iwlagn_mod_params.power_save, - bool, S_IRUGO); -MODULE_PARM_DESC(power_save, - "enable WiFi power management (default: disable)"); - -module_param_named(power_level, iwlagn_mod_params.power_level, - int, S_IRUGO); -MODULE_PARM_DESC(power_level, - "default power save level (range from 1 - 5, default: 1)"); - -module_param_named(auto_agg, iwlagn_mod_params.auto_agg, - bool, S_IRUGO); -MODULE_PARM_DESC(auto_agg, - "enable agg w/o check traffic load (default: enable)"); - -/* - * For now, keep using power level 1 instead of automatically - * adjusting ... - */ -module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust, - bool, S_IRUGO); -MODULE_PARM_DESC(no_sleep_autoadjust, - "don't automatically adjust sleep level " - "according to maximum network latency (default: true)"); diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.h deleted file mode 100644 index 3780a03f..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-agn.h +++ /dev/null @@ -1,409 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_agn_h__ -#define __iwl_agn_h__ - -#include "iwl-dev.h" - -struct iwl_ucode_capabilities; - -extern struct ieee80211_ops iwlagn_hw_ops; - -static inline void iwl_set_calib_hdr(struct iwl_calib_hdr *hdr, u8 cmd) -{ - hdr->op_code = cmd; - hdr->first_group = 0; - hdr->groups_num = 1; - hdr->data_valid = 1; -} - -void iwl_down(struct iwl_priv *priv); -void iwl_cancel_deferred_work(struct iwl_priv *priv); -void iwlagn_prepare_restart(struct iwl_priv *priv); -void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb); -int __must_check iwl_rx_dispatch(struct iwl_op_mode *op_mode, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); -void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state); -void iwl_nic_error(struct iwl_op_mode *op_mode); - -bool iwl_check_for_ct_kill(struct iwl_priv *priv); - -void iwlagn_lift_passive_no_rx(struct iwl_priv *priv); - -/* MAC80211 */ -struct ieee80211_hw *iwl_alloc_all(void); -int iwlagn_mac_setup_register(struct iwl_priv *priv, - const struct iwl_ucode_capabilities *capa); -void iwlagn_mac_unregister(struct iwl_priv *priv); - -/* commands */ -int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd); -int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id, - u32 flags, u16 len, const void *data); - -/* RXON */ -int iwlagn_set_pan_params(struct iwl_priv *priv); -int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx); -void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx); -int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed); -void iwlagn_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changes); -void iwlagn_config_ht40(struct ieee80211_conf *conf, - struct iwl_rxon_context *ctx); - -/* uCode */ -int iwlagn_rx_calib_result(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); -int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type); -void iwl_send_prio_tbl(struct iwl_priv *priv); -int iwl_init_alive_start(struct iwl_priv *priv); -int iwl_run_init_ucode(struct iwl_priv *priv); -int iwl_load_ucode_wait_alive(struct iwl_priv *priv, - enum iwl_ucode_type ucode_type); -int iwl_send_calib_results(struct iwl_priv *priv); -int iwl_calib_set(struct iwl_priv *priv, - const struct iwl_calib_hdr *cmd, int len); -void iwl_calib_free_results(struct iwl_priv *priv); - -/* lib */ -int iwlagn_send_tx_power(struct iwl_priv *priv); -void iwlagn_temperature(struct iwl_priv *priv); -u16 iwl_eeprom_calib_version(struct iwl_shared *shrd); -int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control); -void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control); -int iwlagn_send_beacon_cmd(struct iwl_priv *priv); -#ifdef CONFIG_PM_SLEEP -int iwlagn_send_patterns(struct iwl_priv *priv, - struct cfg80211_wowlan *wowlan); -int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan); -#endif - -/* rx */ -int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band); -void iwl_setup_rx_handlers(struct iwl_priv *priv); - - -/* tx */ -int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb); -int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid, u16 *ssn); -int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid, u8 buf_size); -int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, - struct ieee80211_sta *sta, u16 tid); -int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); -int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); - -static inline u32 iwl_tx_status_to_mac80211(u32 status) -{ - status &= TX_STATUS_MSK; - - switch (status) { - case TX_STATUS_SUCCESS: - case TX_STATUS_DIRECT_DONE: - return IEEE80211_TX_STAT_ACK; - case TX_STATUS_FAIL_DEST_PS: - case TX_STATUS_FAIL_PASSIVE_NO_RX: - return IEEE80211_TX_STAT_TX_FILTERED; - default: - return 0; - } -} - -static inline bool iwl_is_tx_success(u32 status) -{ - status &= TX_STATUS_MSK; - return (status == TX_STATUS_SUCCESS) || - (status == TX_STATUS_DIRECT_DONE); -} - -u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx, u8 valid); - -/* scan */ -void iwlagn_post_scan(struct iwl_priv *priv); -void iwlagn_disable_roc(struct iwl_priv *priv); - -/* bt coex */ -void iwlagn_send_advance_bt_config(struct iwl_priv *priv); -int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); -void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv); -void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv); -void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv); -void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv); -void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena); - -#ifdef CONFIG_IWLWIFI_DEBUG -const char *iwl_get_tx_fail_reason(u32 status); -const char *iwl_get_agg_tx_fail_reason(u16 status); -#else -static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; } -static inline const char *iwl_get_agg_tx_fail_reason(u16 status) { return ""; } -#endif - - -/* station management */ -int iwlagn_manage_ibss_station(struct iwl_priv *priv, - struct ieee80211_vif *vif, bool add); -#define IWL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */ -#define IWL_STA_UCODE_ACTIVE BIT(1) /* ucode entry is active */ -#define IWL_STA_UCODE_INPROGRESS BIT(2) /* ucode entry is in process of - being activated */ -#define IWL_STA_LOCAL BIT(3) /* station state not directed by mac80211; - (this is for the IBSS BSSID stations) */ -#define IWL_STA_BCAST BIT(4) /* this station is the special bcast station */ - - -void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx); -void iwl_clear_ucode_stations(struct iwl_priv *priv, - struct iwl_rxon_context *ctx); -void iwl_dealloc_bcast_stations(struct iwl_priv *priv); -int iwl_get_free_ucode_key_offset(struct iwl_priv *priv); -int iwl_send_add_sta(struct iwl_priv *priv, - struct iwl_addsta_cmd *sta, u8 flags); -int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - const u8 *addr, bool is_ap, - struct ieee80211_sta *sta, u8 *sta_id_r); -int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id, - const u8 *addr); -void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id, - const u8 *addr); -u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - const u8 *addr, bool is_ap, struct ieee80211_sta *sta); - -void iwl_sta_fill_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - u8 sta_id, struct iwl_link_quality_cmd *link_cmd); -int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct iwl_link_quality_cmd *lq, u8 flags, bool init); -int iwl_add_sta_callback(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); -int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta *sta); - - -static inline int iwl_sta_id(struct ieee80211_sta *sta) -{ - if (WARN_ON(!sta)) - return IWL_INVALID_STATION; - - return ((struct iwl_station_priv *)sta->drv_priv)->sta_id; -} - -int iwlagn_alloc_bcast_station(struct iwl_priv *priv, - struct iwl_rxon_context *ctx); -int iwlagn_add_bssid_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - const u8 *addr, u8 *sta_id_r); -int iwl_remove_default_wep_key(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *key); -int iwl_set_default_wep_key(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *key); -int iwl_restore_default_wep_keys(struct iwl_priv *priv, - struct iwl_rxon_context *ctx); -int iwl_set_dynamic_key(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *key, - struct ieee80211_sta *sta); -int iwl_remove_dynamic_key(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_key_conf *key, - struct ieee80211_sta *sta); -void iwl_update_tkip_key(struct iwl_priv *priv, - struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); -int iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid); -int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta, - int tid, u16 ssn); -int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta, - int tid); -void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt); -int iwl_update_bcast_station(struct iwl_priv *priv, - struct iwl_rxon_context *ctx); -int iwl_update_bcast_stations(struct iwl_priv *priv); - -/* rate */ -static inline u32 iwl_ant_idx_to_flags(u8 ant_idx) -{ - return BIT(ant_idx) << RATE_MCS_ANT_POS; -} - -static inline u8 iwl_hw_get_rate(__le32 rate_n_flags) -{ - return le32_to_cpu(rate_n_flags) & RATE_MCS_RATE_MSK; -} - -static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags) -{ - return cpu_to_le32(flags|(u32)rate); -} - -/* eeprom */ -void iwl_eeprom_get_mac(const struct iwl_shared *shrd, u8 *mac); - -extern int iwl_alive_start(struct iwl_priv *priv); -/* svtool */ -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE -extern int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, - int len); -extern int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct netlink_callback *cb, - void *data, int len); -extern void iwl_testmode_init(struct iwl_priv *priv); -extern void iwl_testmode_cleanup(struct iwl_priv *priv); -#else -static inline -int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len) -{ - return -ENOSYS; -} -static inline -int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb, - struct netlink_callback *cb, - void *data, int len) -{ - return -ENOSYS; -} -static inline -void iwl_testmode_init(struct iwl_priv *priv) -{ -} -static inline -void iwl_testmode_cleanup(struct iwl_priv *priv) -{ -} -#endif - -#ifdef CONFIG_IWLWIFI_DEBUG -void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid); -#else -static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid) -{ -} -#endif - -/* status checks */ - -static inline int iwl_is_ready(struct iwl_priv *priv) -{ - /* The adapter is 'ready' if READY and GEO_CONFIGURED bits are - * set but EXIT_PENDING is not */ - return test_bit(STATUS_READY, &priv->status) && - test_bit(STATUS_GEO_CONFIGURED, &priv->status) && - !test_bit(STATUS_EXIT_PENDING, &priv->status); -} - -static inline int iwl_is_alive(struct iwl_priv *priv) -{ - return test_bit(STATUS_ALIVE, &priv->status); -} - -static inline int iwl_is_rfkill(struct iwl_priv *priv) -{ - return test_bit(STATUS_RF_KILL_HW, &priv->status); -} - -static inline int iwl_is_ctkill(struct iwl_priv *priv) -{ - return test_bit(STATUS_CT_KILL, &priv->status); -} - -static inline int iwl_is_ready_rf(struct iwl_priv *priv) -{ - if (iwl_is_rfkill(priv)) - return 0; - - return iwl_is_ready(priv); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -#define IWL_DEBUG_QUIET_RFKILL(m, fmt, args...) \ -do { \ - if (!iwl_is_rfkill((m))) \ - IWL_ERR(m, fmt, ##args); \ - else \ - __iwl_err(trans(m)->dev, true, \ - !iwl_have_debug_level(IWL_DL_RADIO), \ - fmt, ##args); \ -} while (0) -#else -#define IWL_DEBUG_QUIET_RFKILL(m, fmt, args...) \ -do { \ - if (!iwl_is_rfkill((m))) \ - IWL_ERR(m, fmt, ##args); \ - else \ - __iwl_err(trans(m)->dev, true, true, fmt, ##args); \ -} while (0) -#endif /* CONFIG_IWLWIFI_DEBUG */ - -#endif /* __iwl_agn_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-cfg.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-cfg.h deleted file mode 100644 index 82152311..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-cfg.h +++ /dev/null @@ -1,113 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_pci_h__ -#define __iwl_pci_h__ - - -/* - * This file declares the config structures for all devices. - */ - -extern const struct iwl_cfg iwl5300_agn_cfg; -extern const struct iwl_cfg iwl5100_agn_cfg; -extern const struct iwl_cfg iwl5350_agn_cfg; -extern const struct iwl_cfg iwl5100_bgn_cfg; -extern const struct iwl_cfg iwl5100_abg_cfg; -extern const struct iwl_cfg iwl5150_agn_cfg; -extern const struct iwl_cfg iwl5150_abg_cfg; -extern const struct iwl_cfg iwl6005_2agn_cfg; -extern const struct iwl_cfg iwl6005_2abg_cfg; -extern const struct iwl_cfg iwl6005_2bg_cfg; -extern const struct iwl_cfg iwl6005_2agn_sff_cfg; -extern const struct iwl_cfg iwl6005_2agn_d_cfg; -extern const struct iwl_cfg iwl6005_2agn_mow1_cfg; -extern const struct iwl_cfg iwl6005_2agn_mow2_cfg; -extern const struct iwl_cfg iwl1030_bgn_cfg; -extern const struct iwl_cfg iwl1030_bg_cfg; -extern const struct iwl_cfg iwl6030_2agn_cfg; -extern const struct iwl_cfg iwl6030_2abg_cfg; -extern const struct iwl_cfg iwl6030_2bgn_cfg; -extern const struct iwl_cfg iwl6030_2bg_cfg; -extern const struct iwl_cfg iwl6000i_2agn_cfg; -extern const struct iwl_cfg iwl6000i_2abg_cfg; -extern const struct iwl_cfg iwl6000i_2bg_cfg; -extern const struct iwl_cfg iwl6000_3agn_cfg; -extern const struct iwl_cfg iwl6050_2agn_cfg; -extern const struct iwl_cfg iwl6050_2abg_cfg; -extern const struct iwl_cfg iwl6150_bgn_cfg; -extern const struct iwl_cfg iwl6150_bg_cfg; -extern const struct iwl_cfg iwl1000_bgn_cfg; -extern const struct iwl_cfg iwl1000_bg_cfg; -extern const struct iwl_cfg iwl100_bgn_cfg; -extern const struct iwl_cfg iwl100_bg_cfg; -extern const struct iwl_cfg iwl130_bgn_cfg; -extern const struct iwl_cfg iwl130_bg_cfg; -extern const struct iwl_cfg iwl2000_2bgn_cfg; -extern const struct iwl_cfg iwl2000_2bgn_d_cfg; -extern const struct iwl_cfg iwl2030_2bgn_cfg; -extern const struct iwl_cfg iwl6035_2agn_cfg; -extern const struct iwl_cfg iwl105_bgn_cfg; -extern const struct iwl_cfg iwl105_bgn_d_cfg; -extern const struct iwl_cfg iwl135_bgn_cfg; - -#endif /* __iwl_pci_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-commands.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-commands.h deleted file mode 100644 index 9ed73e51..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-commands.h +++ /dev/null @@ -1,3943 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -/* - * Please use this file (iwl-commands.h) only for uCode API definitions. - * Please use iwl-xxxx-hw.h for hardware-related definitions. - * Please use iwl-dev.h for driver implementation definitions. - */ - -#ifndef __iwl_commands_h__ -#define __iwl_commands_h__ - -#include <linux/ieee80211.h> -#include <linux/types.h> - - -enum { - REPLY_ALIVE = 0x1, - REPLY_ERROR = 0x2, - REPLY_ECHO = 0x3, /* test command */ - - /* RXON and QOS commands */ - REPLY_RXON = 0x10, - REPLY_RXON_ASSOC = 0x11, - REPLY_QOS_PARAM = 0x13, - REPLY_RXON_TIMING = 0x14, - - /* Multi-Station support */ - REPLY_ADD_STA = 0x18, - REPLY_REMOVE_STA = 0x19, - REPLY_REMOVE_ALL_STA = 0x1a, /* not used */ - REPLY_TXFIFO_FLUSH = 0x1e, - - /* Security */ - REPLY_WEPKEY = 0x20, - - /* RX, TX, LEDs */ - REPLY_TX = 0x1c, - REPLY_LEDS_CMD = 0x48, - REPLY_TX_LINK_QUALITY_CMD = 0x4e, - - /* WiMAX coexistence */ - COEX_PRIORITY_TABLE_CMD = 0x5a, - COEX_MEDIUM_NOTIFICATION = 0x5b, - COEX_EVENT_CMD = 0x5c, - - /* Calibration */ - TEMPERATURE_NOTIFICATION = 0x62, - CALIBRATION_CFG_CMD = 0x65, - CALIBRATION_RES_NOTIFICATION = 0x66, - CALIBRATION_COMPLETE_NOTIFICATION = 0x67, - - /* 802.11h related */ - REPLY_QUIET_CMD = 0x71, /* not used */ - REPLY_CHANNEL_SWITCH = 0x72, - CHANNEL_SWITCH_NOTIFICATION = 0x73, - REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74, - SPECTRUM_MEASURE_NOTIFICATION = 0x75, - - /* Power Management */ - POWER_TABLE_CMD = 0x77, - PM_SLEEP_NOTIFICATION = 0x7A, - PM_DEBUG_STATISTIC_NOTIFIC = 0x7B, - - /* Scan commands and notifications */ - REPLY_SCAN_CMD = 0x80, - REPLY_SCAN_ABORT_CMD = 0x81, - SCAN_START_NOTIFICATION = 0x82, - SCAN_RESULTS_NOTIFICATION = 0x83, - SCAN_COMPLETE_NOTIFICATION = 0x84, - - /* IBSS/AP commands */ - BEACON_NOTIFICATION = 0x90, - REPLY_TX_BEACON = 0x91, - WHO_IS_AWAKE_NOTIFICATION = 0x94, /* not used */ - - /* Miscellaneous commands */ - REPLY_TX_POWER_DBM_CMD = 0x95, - QUIET_NOTIFICATION = 0x96, /* not used */ - REPLY_TX_PWR_TABLE_CMD = 0x97, - REPLY_TX_POWER_DBM_CMD_V1 = 0x98, /* old version of API */ - TX_ANT_CONFIGURATION_CMD = 0x98, - MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - - /* Bluetooth device coexistence config command */ - REPLY_BT_CONFIG = 0x9b, - - /* Statistics */ - REPLY_STATISTICS_CMD = 0x9c, - STATISTICS_NOTIFICATION = 0x9d, - - /* RF-KILL commands and notifications */ - REPLY_CARD_STATE_CMD = 0xa0, - CARD_STATE_NOTIFICATION = 0xa1, - - /* Missed beacons notification */ - MISSED_BEACONS_NOTIFICATION = 0xa2, - - REPLY_CT_KILL_CONFIG_CMD = 0xa4, - SENSITIVITY_CMD = 0xa8, - REPLY_PHY_CALIBRATION_CMD = 0xb0, - REPLY_RX_PHY_CMD = 0xc0, - REPLY_RX_MPDU_CMD = 0xc1, - REPLY_RX = 0xc3, - REPLY_COMPRESSED_BA = 0xc5, - - /* BT Coex */ - REPLY_BT_COEX_PRIO_TABLE = 0xcc, - REPLY_BT_COEX_PROT_ENV = 0xcd, - REPLY_BT_COEX_PROFILE_NOTIF = 0xce, - - /* PAN commands */ - REPLY_WIPAN_PARAMS = 0xb2, - REPLY_WIPAN_RXON = 0xb3, /* use REPLY_RXON structure */ - REPLY_WIPAN_RXON_TIMING = 0xb4, /* use REPLY_RXON_TIMING structure */ - REPLY_WIPAN_RXON_ASSOC = 0xb6, /* use REPLY_RXON_ASSOC structure */ - REPLY_WIPAN_QOS_PARAM = 0xb7, /* use REPLY_QOS_PARAM structure */ - REPLY_WIPAN_WEPKEY = 0xb8, /* use REPLY_WEPKEY structure */ - REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9, - REPLY_WIPAN_NOA_NOTIFICATION = 0xbc, - REPLY_WIPAN_DEACTIVATION_COMPLETE = 0xbd, - - REPLY_WOWLAN_PATTERNS = 0xe0, - REPLY_WOWLAN_WAKEUP_FILTER = 0xe1, - REPLY_WOWLAN_TSC_RSC_PARAMS = 0xe2, - REPLY_WOWLAN_TKIP_PARAMS = 0xe3, - REPLY_WOWLAN_KEK_KCK_MATERIAL = 0xe4, - REPLY_WOWLAN_GET_STATUS = 0xe5, - REPLY_D3_CONFIG = 0xd3, - - REPLY_MAX = 0xff -}; - -/****************************************************************************** - * (0) - * Commonly used structures and definitions: - * Command header, rate_n_flags, txpower - * - *****************************************************************************/ - -/* iwl_cmd_header flags value */ -#define IWL_CMD_FAILED_MSK 0x40 - -/** - * iwlagn rate_n_flags bit fields - * - * rate_n_flags format is used in following iwlagn commands: - * REPLY_RX (response only) - * REPLY_RX_MPDU (response only) - * REPLY_TX (both command and response) - * REPLY_TX_LINK_QUALITY_CMD - * - * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"): - * 2-0: 0) 6 Mbps - * 1) 12 Mbps - * 2) 18 Mbps - * 3) 24 Mbps - * 4) 36 Mbps - * 5) 48 Mbps - * 6) 54 Mbps - * 7) 60 Mbps - * - * 4-3: 0) Single stream (SISO) - * 1) Dual stream (MIMO) - * 2) Triple stream (MIMO) - * - * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data - * - * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"): - * 3-0: 0xD) 6 Mbps - * 0xF) 9 Mbps - * 0x5) 12 Mbps - * 0x7) 18 Mbps - * 0x9) 24 Mbps - * 0xB) 36 Mbps - * 0x1) 48 Mbps - * 0x3) 54 Mbps - * - * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"): - * 6-0: 10) 1 Mbps - * 20) 2 Mbps - * 55) 5.5 Mbps - * 110) 11 Mbps - */ -#define RATE_MCS_CODE_MSK 0x7 -#define RATE_MCS_SPATIAL_POS 3 -#define RATE_MCS_SPATIAL_MSK 0x18 -#define RATE_MCS_HT_DUP_POS 5 -#define RATE_MCS_HT_DUP_MSK 0x20 -/* Both legacy and HT use bits 7:0 as the CCK/OFDM rate or HT MCS */ -#define RATE_MCS_RATE_MSK 0xff - -/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ -#define RATE_MCS_FLAGS_POS 8 -#define RATE_MCS_HT_POS 8 -#define RATE_MCS_HT_MSK 0x100 - -/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ -#define RATE_MCS_CCK_POS 9 -#define RATE_MCS_CCK_MSK 0x200 - -/* Bit 10: (1) Use Green Field preamble */ -#define RATE_MCS_GF_POS 10 -#define RATE_MCS_GF_MSK 0x400 - -/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */ -#define RATE_MCS_HT40_POS 11 -#define RATE_MCS_HT40_MSK 0x800 - -/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */ -#define RATE_MCS_DUP_POS 12 -#define RATE_MCS_DUP_MSK 0x1000 - -/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ -#define RATE_MCS_SGI_POS 13 -#define RATE_MCS_SGI_MSK 0x2000 - -/** - * rate_n_flags Tx antenna masks - * 4965 has 2 transmitters - * 5100 has 1 transmitter B - * 5150 has 1 transmitter A - * 5300 has 3 transmitters - * 5350 has 3 transmitters - * bit14:16 - */ -#define RATE_MCS_ANT_POS 14 -#define RATE_MCS_ANT_A_MSK 0x04000 -#define RATE_MCS_ANT_B_MSK 0x08000 -#define RATE_MCS_ANT_C_MSK 0x10000 -#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK) -#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK) -#define RATE_ANT_NUM 3 - -#define POWER_TABLE_NUM_ENTRIES 33 -#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 -#define POWER_TABLE_CCK_ENTRY 32 - -#define IWL_PWR_NUM_HT_OFDM_ENTRIES 24 -#define IWL_PWR_CCK_ENTRIES 2 - -/** - * struct tx_power_dual_stream - * - * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH - * - * Same format as iwl_tx_power_dual_stream, but __le32 - */ -struct tx_power_dual_stream { - __le32 dw; -} __packed; - -/** - * Command REPLY_TX_POWER_DBM_CMD = 0x98 - * struct iwlagn_tx_power_dbm_cmd - */ -#define IWLAGN_TX_POWER_AUTO 0x7f -#define IWLAGN_TX_POWER_NO_CLOSED (0x1 << 6) - -struct iwlagn_tx_power_dbm_cmd { - s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ - u8 flags; - s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */ - u8 reserved; -} __packed; - -/** - * Command TX_ANT_CONFIGURATION_CMD = 0x98 - * This command is used to configure valid Tx antenna. - * By default uCode concludes the valid antenna according to the radio flavor. - * This command enables the driver to override/modify this conclusion. - */ -struct iwl_tx_ant_config_cmd { - __le32 valid; -} __packed; - -/****************************************************************************** - * (0a) - * Alive and Error Commands & Responses: - * - *****************************************************************************/ - -#define UCODE_VALID_OK cpu_to_le32(0x1) - -/** - * REPLY_ALIVE = 0x1 (response only, not a command) - * - * uCode issues this "alive" notification once the runtime image is ready - * to receive commands from the driver. This is the *second* "alive" - * notification that the driver will receive after rebooting uCode; - * this "alive" is indicated by subtype field != 9. - * - * See comments documenting "BSM" (bootstrap state machine). - * - * This response includes two pointers to structures within the device's - * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: - * - * 1) log_event_table_ptr indicates base of the event log. This traces - * a 256-entry history of uCode execution within a circular buffer. - * Its header format is: - * - * __le32 log_size; log capacity (in number of entries) - * __le32 type; (1) timestamp with each entry, (0) no timestamp - * __le32 wraps; # times uCode has wrapped to top of circular buffer - * __le32 write_index; next circular buffer entry that uCode would fill - * - * The header is followed by the circular buffer of log entries. Entries - * with timestamps have the following format: - * - * __le32 event_id; range 0 - 1500 - * __le32 timestamp; low 32 bits of TSF (of network, if associated) - * __le32 data; event_id-specific data value - * - * Entries without timestamps contain only event_id and data. - * - * - * 2) error_event_table_ptr indicates base of the error log. This contains - * information about any uCode error that occurs. For agn, the format - * of the error log is defined by struct iwl_error_event_table. - * - * The Linux driver can print both logs to the system log when a uCode error - * occurs. - */ - -/* - * Note: This structure is read from the device with IO accesses, - * and the reading already does the endian conversion. As it is - * read with u32-sized accesses, any members with a different size - * need to be ordered correctly though! - */ -struct iwl_error_event_table { - u32 valid; /* (nonzero) valid, (0) log is empty */ - u32 error_id; /* type of error */ - u32 pc; /* program counter */ - u32 blink1; /* branch link */ - u32 blink2; /* branch link */ - u32 ilink1; /* interrupt link */ - u32 ilink2; /* interrupt link */ - u32 data1; /* error-specific data */ - u32 data2; /* error-specific data */ - u32 line; /* source code line of error */ - u32 bcon_time; /* beacon timer */ - u32 tsf_low; /* network timestamp function timer */ - u32 tsf_hi; /* network timestamp function timer */ - u32 gp1; /* GP1 timer register */ - u32 gp2; /* GP2 timer register */ - u32 gp3; /* GP3 timer register */ - u32 ucode_ver; /* uCode version */ - u32 hw_ver; /* HW Silicon version */ - u32 brd_ver; /* HW board version */ - u32 log_pc; /* log program counter */ - u32 frame_ptr; /* frame pointer */ - u32 stack_ptr; /* stack pointer */ - u32 hcmd; /* last host command header */ - u32 isr0; /* isr status register LMPM_NIC_ISR0: - * rxtx_flag */ - u32 isr1; /* isr status register LMPM_NIC_ISR1: - * host_flag */ - u32 isr2; /* isr status register LMPM_NIC_ISR2: - * enc_flag */ - u32 isr3; /* isr status register LMPM_NIC_ISR3: - * time_flag */ - u32 isr4; /* isr status register LMPM_NIC_ISR4: - * wico interrupt */ - u32 isr_pref; /* isr status register LMPM_NIC_PREF_STAT */ - u32 wait_event; /* wait event() caller address */ - u32 l2p_control; /* L2pControlField */ - u32 l2p_duration; /* L2pDurationField */ - u32 l2p_mhvalid; /* L2pMhValidBits */ - u32 l2p_addr_match; /* L2pAddrMatchStat */ - u32 lmpm_pmg_sel; /* indicate which clocks are turned on - * (LMPM_PMG_SEL) */ - u32 u_timestamp; /* indicate when the date and time of the - * compilation */ - u32 flow_handler; /* FH read/write pointers, RX credit */ -} __packed; - -struct iwl_alive_resp { - u8 ucode_minor; - u8 ucode_major; - __le16 reserved1; - u8 sw_rev[8]; - u8 ver_type; - u8 ver_subtype; /* not "9" for runtime alive */ - __le16 reserved2; - __le32 log_event_table_ptr; /* SRAM address for event log */ - __le32 error_event_table_ptr; /* SRAM address for error log */ - __le32 timestamp; - __le32 is_valid; -} __packed; - -/* - * REPLY_ERROR = 0x2 (response only, not a command) - */ -struct iwl_error_resp { - __le32 error_type; - u8 cmd_id; - u8 reserved1; - __le16 bad_cmd_seq_num; - __le32 error_info; - __le64 timestamp; -} __packed; - -/****************************************************************************** - * (1) - * RXON Commands & Responses: - * - *****************************************************************************/ - -/* - * Rx config defines & structure - */ -/* rx_config device types */ -enum { - RXON_DEV_TYPE_AP = 1, - RXON_DEV_TYPE_ESS = 3, - RXON_DEV_TYPE_IBSS = 4, - RXON_DEV_TYPE_SNIFFER = 6, - RXON_DEV_TYPE_CP = 7, - RXON_DEV_TYPE_2STA = 8, - RXON_DEV_TYPE_P2P = 9, -}; - - -#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0) -#define RXON_RX_CHAIN_DRIVER_FORCE_POS (0) -#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1) -#define RXON_RX_CHAIN_VALID_POS (1) -#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4) -#define RXON_RX_CHAIN_FORCE_SEL_POS (4) -#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7) -#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7) -#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10) -#define RXON_RX_CHAIN_CNT_POS (10) -#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12) -#define RXON_RX_CHAIN_MIMO_CNT_POS (12) -#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14) -#define RXON_RX_CHAIN_MIMO_FORCE_POS (14) - -/* rx_config flags */ -/* band & modulation selection */ -#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0) -#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1) -/* auto detection enable */ -#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2) -/* TGg protection when tx */ -#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3) -/* cck short slot & preamble */ -#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4) -#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5) -/* antenna selection */ -#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7) -#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00) -#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8) -#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9) -/* radar detection enable */ -#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12) -#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13) -/* rx response to host with 8-byte TSF -* (according to ON_AIR deassertion) */ -#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15) - - -/* HT flags */ -#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22) -#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22) - -#define RXON_FLG_HT_OPERATING_MODE_POS (23) - -#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23) -#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23) - -#define RXON_FLG_CHANNEL_MODE_POS (25) -#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25) - -/* channel mode */ -enum { - CHANNEL_MODE_LEGACY = 0, - CHANNEL_MODE_PURE_40 = 1, - CHANNEL_MODE_MIXED = 2, - CHANNEL_MODE_RESERVED = 3, -}; -#define RXON_FLG_CHANNEL_MODE_LEGACY cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS) -#define RXON_FLG_CHANNEL_MODE_PURE_40 cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS) -#define RXON_FLG_CHANNEL_MODE_MIXED cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS) - -/* CTS to self (if spec allows) flag */ -#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30) - -/* rx_config filter flags */ -/* accept all data frames */ -#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0) -/* pass control & management to host */ -#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1) -/* accept multi-cast */ -#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2) -/* don't decrypt uni-cast frames */ -#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3) -/* don't decrypt multi-cast frames */ -#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4) -/* STA is associated */ -#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5) -/* transfer to host non bssid beacons in associated state */ -#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6) - -/** - * REPLY_RXON = 0x10 (command, has simple generic response) - * - * RXON tunes the radio tuner to a service channel, and sets up a number - * of parameters that are used primarily for Rx, but also for Tx operations. - * - * NOTE: When tuning to a new channel, driver must set the - * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent - * info within the device, including the station tables, tx retry - * rate tables, and txpower tables. Driver must build a new station - * table and txpower table before transmitting anything on the RXON - * channel. - * - * NOTE: All RXONs wipe clean the internal txpower table. Driver must - * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10), - * regardless of whether RXON_FILTER_ASSOC_MSK is set. - */ - -struct iwl_rxon_cmd { - u8 node_addr[6]; - __le16 reserved1; - u8 bssid_addr[6]; - __le16 reserved2; - u8 wlap_bssid_addr[6]; - __le16 reserved3; - u8 dev_type; - u8 air_propagation; - __le16 rx_chain; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - __le16 assoc_id; - __le32 flags; - __le32 filter_flags; - __le16 channel; - u8 ofdm_ht_single_stream_basic_rates; - u8 ofdm_ht_dual_stream_basic_rates; - u8 ofdm_ht_triple_stream_basic_rates; - u8 reserved5; - __le16 acquisition_data; - __le16 reserved6; -} __packed; - -/* - * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response) - */ -struct iwl_rxon_assoc_cmd { - __le32 flags; - __le32 filter_flags; - u8 ofdm_basic_rates; - u8 cck_basic_rates; - __le16 reserved1; - u8 ofdm_ht_single_stream_basic_rates; - u8 ofdm_ht_dual_stream_basic_rates; - u8 ofdm_ht_triple_stream_basic_rates; - u8 reserved2; - __le16 rx_chain_select_flags; - __le16 acquisition_data; - __le32 reserved3; -} __packed; - -#define IWL_CONN_MAX_LISTEN_INTERVAL 10 -#define IWL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */ - -/* - * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) - */ -struct iwl_rxon_time_cmd { - __le64 timestamp; - __le16 beacon_interval; - __le16 atim_window; - __le32 beacon_init_val; - __le16 listen_interval; - u8 dtim_period; - u8 delta_cp_bss_tbtts; -} __packed; - -/* - * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response) - */ -/** - * struct iwl5000_channel_switch_cmd - * @band: 0- 5.2GHz, 1- 2.4GHz - * @expect_beacon: 0- resume transmits after channel switch - * 1- wait for beacon to resume transmits - * @channel: new channel number - * @rxon_flags: Rx on flags - * @rxon_filter_flags: filtering parameters - * @switch_time: switch time in extended beacon format - * @reserved: reserved bytes - */ -struct iwl5000_channel_switch_cmd { - u8 band; - u8 expect_beacon; - __le16 channel; - __le32 rxon_flags; - __le32 rxon_filter_flags; - __le32 switch_time; - __le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES]; -} __packed; - -/** - * struct iwl6000_channel_switch_cmd - * @band: 0- 5.2GHz, 1- 2.4GHz - * @expect_beacon: 0- resume transmits after channel switch - * 1- wait for beacon to resume transmits - * @channel: new channel number - * @rxon_flags: Rx on flags - * @rxon_filter_flags: filtering parameters - * @switch_time: switch time in extended beacon format - * @reserved: reserved bytes - */ -struct iwl6000_channel_switch_cmd { - u8 band; - u8 expect_beacon; - __le16 channel; - __le32 rxon_flags; - __le32 rxon_filter_flags; - __le32 switch_time; - __le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES]; -} __packed; - -/* - * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command) - */ -struct iwl_csa_notification { - __le16 band; - __le16 channel; - __le32 status; /* 0 - OK, 1 - fail */ -} __packed; - -/****************************************************************************** - * (2) - * Quality-of-Service (QOS) Commands & Responses: - * - *****************************************************************************/ - -/** - * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM - * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd - * - * @cw_min: Contention window, start value in numbers of slots. - * Should be a power-of-2, minus 1. Device's default is 0x0f. - * @cw_max: Contention window, max value in numbers of slots. - * Should be a power-of-2, minus 1. Device's default is 0x3f. - * @aifsn: Number of slots in Arbitration Interframe Space (before - * performing random backoff timing prior to Tx). Device default 1. - * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0. - * - * Device will automatically increase contention window by (2*CW) + 1 for each - * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW - * value, to cap the CW value. - */ -struct iwl_ac_qos { - __le16 cw_min; - __le16 cw_max; - u8 aifsn; - u8 reserved1; - __le16 edca_txop; -} __packed; - -/* QoS flags defines */ -#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01) -#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02) -#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10) - -/* Number of Access Categories (AC) (EDCA), queues 0..3 */ -#define AC_NUM 4 - -/* - * REPLY_QOS_PARAM = 0x13 (command, has simple generic response) - * - * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs - * 0: Background, 1: Best Effort, 2: Video, 3: Voice. - */ -struct iwl_qosparam_cmd { - __le32 qos_flags; - struct iwl_ac_qos ac[AC_NUM]; -} __packed; - -/****************************************************************************** - * (3) - * Add/Modify Stations Commands & Responses: - * - *****************************************************************************/ -/* - * Multi station support - */ - -/* Special, dedicated locations within device's station table */ -#define IWL_AP_ID 0 -#define IWL_AP_ID_PAN 1 -#define IWL_STA_ID 2 -#define IWLAGN_PAN_BCAST_ID 14 -#define IWLAGN_BROADCAST_ID 15 -#define IWLAGN_STATION_COUNT 16 - -#define IWL_INVALID_STATION 255 -#define IWL_MAX_TID_COUNT 8 -#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT - -#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2) -#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8) -#define STA_FLG_PAN_STATION cpu_to_le32(1 << 13) -#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17) -#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18) -#define STA_FLG_MAX_AGG_SIZE_POS (19) -#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19) -#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21) -#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22) -#define STA_FLG_AGG_MPDU_DENSITY_POS (23) -#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23) - -/* Use in mode field. 1: modify existing entry, 0: add new station entry */ -#define STA_CONTROL_MODIFY_MSK 0x01 - -/* key flags __le16*/ -#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007) -#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000) -#define STA_KEY_FLG_WEP cpu_to_le16(0x0001) -#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002) -#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003) - -#define STA_KEY_FLG_KEYID_POS 8 -#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800) -/* wep key is either from global key (0) or from station info array (1) */ -#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008) - -/* wep key in STA: 5-bytes (0) or 13-bytes (1) */ -#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000) -#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000) -#define STA_KEY_MAX_NUM 8 -#define STA_KEY_MAX_NUM_PAN 16 -/* must not match WEP_INVALID_OFFSET */ -#define IWLAGN_HW_KEY_DEFAULT 0xfe - -/* Flags indicate whether to modify vs. don't change various station params */ -#define STA_MODIFY_KEY_MASK 0x01 -#define STA_MODIFY_TID_DISABLE_TX 0x02 -#define STA_MODIFY_TX_RATE_MSK 0x04 -#define STA_MODIFY_ADDBA_TID_MSK 0x08 -#define STA_MODIFY_DELBA_TID_MSK 0x10 -#define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20 - -/* Receiver address (actually, Rx station's index into station table), - * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */ -#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid)) - -/* agn */ -struct iwl_keyinfo { - __le16 key_flags; - u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */ - u8 reserved1; - __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */ - u8 key_offset; - u8 reserved2; - u8 key[16]; /* 16-byte unicast decryption key */ - __le64 tx_secur_seq_cnt; - __le64 hw_tkip_mic_rx_key; - __le64 hw_tkip_mic_tx_key; -} __packed; - -/** - * struct sta_id_modify - * @addr[ETH_ALEN]: station's MAC address - * @sta_id: index of station in uCode's station table - * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change - * - * Driver selects unused table index when adding new station, - * or the index to a pre-existing station entry when modifying that station. - * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP). - * - * modify_mask flags select which parameters to modify vs. leave alone. - */ -struct sta_id_modify { - u8 addr[ETH_ALEN]; - __le16 reserved1; - u8 sta_id; - u8 modify_mask; - __le16 reserved2; -} __packed; - -/* - * REPLY_ADD_STA = 0x18 (command) - * - * The device contains an internal table of per-station information, - * with info on security keys, aggregation parameters, and Tx rates for - * initial Tx attempt and any retries (agn devices uses - * REPLY_TX_LINK_QUALITY_CMD, - * - * REPLY_ADD_STA sets up the table entry for one station, either creating - * a new entry, or modifying a pre-existing one. - * - * NOTE: RXON command (without "associated" bit set) wipes the station table - * clean. Moving into RF_KILL state does this also. Driver must set up - * new station table before transmitting anything on the RXON channel - * (except active scans or active measurements; those commands carry - * their own txpower/rate setup data). - * - * When getting started on a new channel, driver must set up the - * IWL_BROADCAST_ID entry (last entry in the table). For a client - * station in a BSS, once an AP is selected, driver sets up the AP STA - * in the IWL_AP_ID entry (1st entry in the table). BROADCAST and AP - * are all that are needed for a BSS client station. If the device is - * used as AP, or in an IBSS network, driver must set up station table - * entries for all STAs in network, starting with index IWL_STA_ID. - */ - -struct iwl_addsta_cmd { - u8 mode; /* 1: modify existing, 0: add new station */ - u8 reserved[3]; - struct sta_id_modify sta; - struct iwl_keyinfo key; - __le32 station_flags; /* STA_FLG_* */ - __le32 station_flags_msk; /* STA_FLG_* */ - - /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID) - * corresponding to bit (e.g. bit 5 controls TID 5). - * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */ - __le16 tid_disable_tx; - __le16 legacy_reserved; - - /* TID for which to add block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - u8 add_immediate_ba_tid; - - /* TID for which to remove block-ack support. - * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */ - u8 remove_immediate_ba_tid; - - /* Starting Sequence Number for added block-ack support. - * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */ - __le16 add_immediate_ba_ssn; - - /* - * Number of packets OK to transmit to station even though - * it is asleep -- used to synchronise PS-poll and u-APSD - * responses while ucode keeps track of STA sleep state. - */ - __le16 sleep_tx_count; - - __le16 reserved2; -} __packed; - - -#define ADD_STA_SUCCESS_MSK 0x1 -#define ADD_STA_NO_ROOM_IN_TABLE 0x2 -#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4 -#define ADD_STA_MODIFY_NON_EXIST_STA 0x8 -/* - * REPLY_ADD_STA = 0x18 (response) - */ -struct iwl_add_sta_resp { - u8 status; /* ADD_STA_* */ -} __packed; - -#define REM_STA_SUCCESS_MSK 0x1 -/* - * REPLY_REM_STA = 0x19 (response) - */ -struct iwl_rem_sta_resp { - u8 status; -} __packed; - -/* - * REPLY_REM_STA = 0x19 (command) - */ -struct iwl_rem_sta_cmd { - u8 num_sta; /* number of removed stations */ - u8 reserved[3]; - u8 addr[ETH_ALEN]; /* MAC addr of the first station */ - u8 reserved2[2]; -} __packed; - - -/* WiFi queues mask */ -#define IWL_SCD_BK_MSK cpu_to_le32(BIT(0)) -#define IWL_SCD_BE_MSK cpu_to_le32(BIT(1)) -#define IWL_SCD_VI_MSK cpu_to_le32(BIT(2)) -#define IWL_SCD_VO_MSK cpu_to_le32(BIT(3)) -#define IWL_SCD_MGMT_MSK cpu_to_le32(BIT(3)) - -/* PAN queues mask */ -#define IWL_PAN_SCD_BK_MSK cpu_to_le32(BIT(4)) -#define IWL_PAN_SCD_BE_MSK cpu_to_le32(BIT(5)) -#define IWL_PAN_SCD_VI_MSK cpu_to_le32(BIT(6)) -#define IWL_PAN_SCD_VO_MSK cpu_to_le32(BIT(7)) -#define IWL_PAN_SCD_MGMT_MSK cpu_to_le32(BIT(7)) -#define IWL_PAN_SCD_MULTICAST_MSK cpu_to_le32(BIT(8)) - -#define IWL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00) - -#define IWL_DROP_SINGLE 0 -#define IWL_DROP_ALL (BIT(IWL_RXON_CTX_BSS) | BIT(IWL_RXON_CTX_PAN)) - -/* - * REPLY_TXFIFO_FLUSH = 0x1e(command and response) - * - * When using full FIFO flush this command checks the scheduler HW block WR/RD - * pointers to check if all the frames were transferred by DMA into the - * relevant TX FIFO queue. Only when the DMA is finished and the queue is - * empty the command can finish. - * This command is used to flush the TXFIFO from transmit commands, it may - * operate on single or multiple queues, the command queue can't be flushed by - * this command. The command response is returned when all the queue flush - * operations are done. Each TX command flushed return response with the FLUSH - * status set in the TX response status. When FIFO flush operation is used, - * the flush operation ends when both the scheduler DMA done and TXFIFO empty - * are set. - * - * @fifo_control: bit mask for which queues to flush - * @flush_control: flush controls - * 0: Dump single MSDU - * 1: Dump multiple MSDU according to PS, INVALID STA, TTL, TID disable. - * 2: Dump all FIFO - */ -struct iwl_txfifo_flush_cmd { - __le32 fifo_control; - __le16 flush_control; - __le16 reserved; -} __packed; - -/* - * REPLY_WEP_KEY = 0x20 - */ -struct iwl_wep_key { - u8 key_index; - u8 key_offset; - u8 reserved1[2]; - u8 key_size; - u8 reserved2[3]; - u8 key[16]; -} __packed; - -struct iwl_wep_cmd { - u8 num_keys; - u8 global_key_type; - u8 flags; - u8 reserved; - struct iwl_wep_key key[0]; -} __packed; - -#define WEP_KEY_WEP_TYPE 1 -#define WEP_KEYS_MAX 4 -#define WEP_INVALID_OFFSET 0xff -#define WEP_KEY_LEN_64 5 -#define WEP_KEY_LEN_128 13 - -/****************************************************************************** - * (4) - * Rx Responses: - * - *****************************************************************************/ - -#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0) -#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1) - -#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0) -#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1) -#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2) -#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3) -#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0 -#define RX_RES_PHY_FLAGS_ANTENNA_POS 4 - -#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8) -#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8) -#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8) -#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8) -#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8) -#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8) - -#define RX_RES_STATUS_STATION_FOUND (1<<6) -#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7) - -#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11) -#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11) -#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11) -#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11) -#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11) - -#define RX_MPDU_RES_STATUS_ICV_OK (0x20) -#define RX_MPDU_RES_STATUS_MIC_OK (0x40) -#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7) -#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800) - - -#define IWLAGN_RX_RES_PHY_CNT 8 -#define IWLAGN_RX_RES_AGC_IDX 1 -#define IWLAGN_RX_RES_RSSI_AB_IDX 2 -#define IWLAGN_RX_RES_RSSI_C_IDX 3 -#define IWLAGN_OFDM_AGC_MSK 0xfe00 -#define IWLAGN_OFDM_AGC_BIT_POS 9 -#define IWLAGN_OFDM_RSSI_INBAND_A_BITMSK 0x00ff -#define IWLAGN_OFDM_RSSI_ALLBAND_A_BITMSK 0xff00 -#define IWLAGN_OFDM_RSSI_A_BIT_POS 0 -#define IWLAGN_OFDM_RSSI_INBAND_B_BITMSK 0xff0000 -#define IWLAGN_OFDM_RSSI_ALLBAND_B_BITMSK 0xff000000 -#define IWLAGN_OFDM_RSSI_B_BIT_POS 16 -#define IWLAGN_OFDM_RSSI_INBAND_C_BITMSK 0x00ff -#define IWLAGN_OFDM_RSSI_ALLBAND_C_BITMSK 0xff00 -#define IWLAGN_OFDM_RSSI_C_BIT_POS 0 - -struct iwlagn_non_cfg_phy { - __le32 non_cfg_phy[IWLAGN_RX_RES_PHY_CNT]; /* up to 8 phy entries */ -} __packed; - - -/* - * REPLY_RX = 0xc3 (response only, not a command) - * Used only for legacy (non 11n) frames. - */ -struct iwl_rx_phy_res { - u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ - u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ - u8 stat_id; /* configurable DSP phy data set ID */ - u8 reserved1; - __le64 timestamp; /* TSF at on air rise */ - __le32 beacon_time_stamp; /* beacon at on-air rise */ - __le16 phy_flags; /* general phy flags: band, modulation, ... */ - __le16 channel; /* channel number */ - u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ - __le32 rate_n_flags; /* RATE_MCS_* */ - __le16 byte_count; /* frame's byte-count */ - __le16 frame_time; /* frame's time on the air */ -} __packed; - -struct iwl_rx_mpdu_res_start { - __le16 byte_count; - __le16 reserved; -} __packed; - - -/****************************************************************************** - * (5) - * Tx Commands & Responses: - * - * Driver must place each REPLY_TX command into one of the prioritized Tx - * queues in host DRAM, shared between driver and device (see comments for - * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode - * are preparing to transmit, the device pulls the Tx command over the PCI - * bus via one of the device's Tx DMA channels, to fill an internal FIFO - * from which data will be transmitted. - * - * uCode handles all timing and protocol related to control frames - * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler - * handle reception of block-acks; uCode updates the host driver via - * REPLY_COMPRESSED_BA. - * - * uCode handles retrying Tx when an ACK is expected but not received. - * This includes trying lower data rates than the one requested in the Tx - * command, as set up by the REPLY_TX_LINK_QUALITY_CMD (agn). - * - * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD. - * This command must be executed after every RXON command, before Tx can occur. - *****************************************************************************/ - -/* REPLY_TX Tx flags field */ - -/* - * 1: Use RTS/CTS protocol or CTS-to-self if spec allows it - * before this frame. if CTS-to-self required check - * RXON_FLG_SELF_CTS_EN status. - */ -#define TX_CMD_FLG_PROT_REQUIRE_MSK cpu_to_le32(1 << 0) - -/* 1: Expect ACK from receiving station - * 0: Don't expect ACK (MAC header's duration field s/b 0) - * Set this for unicast frames, but not broadcast/multicast. */ -#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3) - -/* For agn devices: - * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD). - * Tx command's initial_rate_index indicates first rate to try; - * uCode walks through table for additional Tx attempts. - * 0: Use Tx rate/MCS from Tx command's rate_n_flags field. - * This rate will be used for all Tx attempts; it will not be scaled. */ -#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4) - -/* 1: Expect immediate block-ack. - * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */ -#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6) - -/* Tx antenna selection field; reserved (0) for agn devices. */ -#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00) - -/* 1: Ignore Bluetooth priority for this frame. - * 0: Delay Tx until Bluetooth device is done (normal usage). */ -#define TX_CMD_FLG_IGNORE_BT cpu_to_le32(1 << 12) - -/* 1: uCode overrides sequence control field in MAC header. - * 0: Driver provides sequence control field in MAC header. - * Set this for management frames, non-QOS data frames, non-unicast frames, - * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */ -#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13) - -/* 1: This frame is non-last MPDU; more fragments are coming. - * 0: Last fragment, or not using fragmentation. */ -#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14) - -/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame. - * 0: No TSF required in outgoing frame. - * Set this for transmitting beacons and probe responses. */ -#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16) - -/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword - * alignment of frame's payload data field. - * 0: No pad - * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4 - * field (but not both). Driver must align frame data (i.e. data following - * MAC header) to DWORD boundary. */ -#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20) - -/* accelerate aggregation support - * 0 - no CCMP encryption; 1 - CCMP encryption */ -#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22) - -/* HCCA-AP - disable duration overwriting. */ -#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25) - - -/* - * TX command security control - */ -#define TX_CMD_SEC_WEP 0x01 -#define TX_CMD_SEC_CCM 0x02 -#define TX_CMD_SEC_TKIP 0x03 -#define TX_CMD_SEC_MSK 0x03 -#define TX_CMD_SEC_SHIFT 6 -#define TX_CMD_SEC_KEY128 0x08 - -/* - * security overhead sizes - */ -#define WEP_IV_LEN 4 -#define WEP_ICV_LEN 4 -#define CCMP_MIC_LEN 8 -#define TKIP_ICV_LEN 4 - -/* - * REPLY_TX = 0x1c (command) - */ - -/* - * 4965 uCode updates these Tx attempt count values in host DRAM. - * Used for managing Tx retries when expecting block-acks. - * Driver should set these fields to 0. - */ -struct iwl_dram_scratch { - u8 try_cnt; /* Tx attempts */ - u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */ - __le16 reserved; -} __packed; - -struct iwl_tx_cmd { - /* - * MPDU byte count: - * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size, - * + 8 byte IV for CCM or TKIP (not used for WEP) - * + Data payload - * + 8-byte MIC (not used for CCM/WEP) - * NOTE: Does not include Tx command bytes, post-MAC pad bytes, - * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i - * Range: 14-2342 bytes. - */ - __le16 len; - - /* - * MPDU or MSDU byte count for next frame. - * Used for fragmentation and bursting, but not 11n aggregation. - * Same as "len", but for next frame. Set to 0 if not applicable. - */ - __le16 next_frame_len; - - __le32 tx_flags; /* TX_CMD_FLG_* */ - - /* uCode may modify this field of the Tx command (in host DRAM!). - * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */ - struct iwl_dram_scratch scratch; - - /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */ - __le32 rate_n_flags; /* RATE_MCS_* */ - - /* Index of destination station in uCode's station table */ - u8 sta_id; - - /* Type of security encryption: CCM or TKIP */ - u8 sec_ctl; /* TX_CMD_SEC_* */ - - /* - * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial - * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for - * data frames, this field may be used to selectively reduce initial - * rate (via non-0 value) for special frames (e.g. management), while - * still supporting rate scaling for all frames. - */ - u8 initial_rate_index; - u8 reserved; - u8 key[16]; - __le16 next_frame_flags; - __le16 reserved2; - union { - __le32 life_time; - __le32 attempt; - } stop_time; - - /* Host DRAM physical address pointer to "scratch" in this command. - * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */ - __le32 dram_lsb_ptr; - u8 dram_msb_ptr; - - u8 rts_retry_limit; /*byte 50 */ - u8 data_retry_limit; /*byte 51 */ - u8 tid_tspec; - union { - __le16 pm_frame_timeout; - __le16 attempt_duration; - } timeout; - - /* - * Duration of EDCA burst Tx Opportunity, in 32-usec units. - * Set this if txop time is not specified by HCCA protocol (e.g. by AP). - */ - __le16 driver_txop; - - /* - * MAC header goes here, followed by 2 bytes padding if MAC header - * length is 26 or 30 bytes, followed by payload data - */ - u8 payload[0]; - struct ieee80211_hdr hdr[0]; -} __packed; - -/* - * TX command response is sent after *agn* transmission attempts. - * - * both postpone and abort status are expected behavior from uCode. there is - * no special operation required from driver; except for RFKILL_FLUSH, - * which required tx flush host command to flush all the tx frames in queues - */ -enum { - TX_STATUS_SUCCESS = 0x01, - TX_STATUS_DIRECT_DONE = 0x02, - /* postpone TX */ - TX_STATUS_POSTPONE_DELAY = 0x40, - TX_STATUS_POSTPONE_FEW_BYTES = 0x41, - TX_STATUS_POSTPONE_BT_PRIO = 0x42, - TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43, - TX_STATUS_POSTPONE_CALC_TTAK = 0x44, - /* abort TX */ - TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81, - TX_STATUS_FAIL_SHORT_LIMIT = 0x82, - TX_STATUS_FAIL_LONG_LIMIT = 0x83, - TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84, - TX_STATUS_FAIL_DRAIN_FLOW = 0x85, - TX_STATUS_FAIL_RFKILL_FLUSH = 0x86, - TX_STATUS_FAIL_LIFE_EXPIRE = 0x87, - TX_STATUS_FAIL_DEST_PS = 0x88, - TX_STATUS_FAIL_HOST_ABORTED = 0x89, - TX_STATUS_FAIL_BT_RETRY = 0x8a, - TX_STATUS_FAIL_STA_INVALID = 0x8b, - TX_STATUS_FAIL_FRAG_DROPPED = 0x8c, - TX_STATUS_FAIL_TID_DISABLE = 0x8d, - TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e, - TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f, - TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90, - TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91, -}; - -#define TX_PACKET_MODE_REGULAR 0x0000 -#define TX_PACKET_MODE_BURST_SEQ 0x0100 -#define TX_PACKET_MODE_BURST_FIRST 0x0200 - -enum { - TX_POWER_PA_NOT_ACTIVE = 0x0, -}; - -enum { - TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */ - TX_STATUS_DELAY_MSK = 0x00000040, - TX_STATUS_ABORT_MSK = 0x00000080, - TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */ - TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */ - TX_RESERVED = 0x00780000, /* bits 19:22 */ - TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */ - TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */ -}; - -/* ******************************* - * TX aggregation status - ******************************* */ - -enum { - AGG_TX_STATE_TRANSMITTED = 0x00, - AGG_TX_STATE_UNDERRUN_MSK = 0x01, - AGG_TX_STATE_BT_PRIO_MSK = 0x02, - AGG_TX_STATE_FEW_BYTES_MSK = 0x04, - AGG_TX_STATE_ABORT_MSK = 0x08, - AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10, - AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20, - AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40, - AGG_TX_STATE_SCD_QUERY_MSK = 0x80, - AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100, - AGG_TX_STATE_RESPONSE_MSK = 0x1ff, - AGG_TX_STATE_DUMP_TX_MSK = 0x200, - AGG_TX_STATE_DELAY_TX_MSK = 0x400 -}; - -#define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */ -#define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */ - -#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \ - AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \ - AGG_TX_STATE_LAST_SENT_BT_KILL_MSK) - -/* # tx attempts for first frame in aggregation */ -#define AGG_TX_STATE_TRY_CNT_POS 12 -#define AGG_TX_STATE_TRY_CNT_MSK 0xf000 - -/* Command ID and sequence number of Tx command for this frame */ -#define AGG_TX_STATE_SEQ_NUM_POS 16 -#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000 - -/* - * REPLY_TX = 0x1c (response) - * - * This response may be in one of two slightly different formats, indicated - * by the frame_count field: - * - * 1) No aggregation (frame_count == 1). This reports Tx results for - * a single frame. Multiple attempts, at various bit rates, may have - * been made for this frame. - * - * 2) Aggregation (frame_count > 1). This reports Tx results for - * 2 or more frames that used block-acknowledge. All frames were - * transmitted at same rate. Rate scaling may have been used if first - * frame in this new agg block failed in previous agg block(s). - * - * Note that, for aggregation, ACK (block-ack) status is not delivered here; - * block-ack has not been received by the time the agn device records - * this status. - * This status relates to reasons the tx might have been blocked or aborted - * within the sending station (this agn device), rather than whether it was - * received successfully by the destination station. - */ -struct agg_tx_status { - __le16 status; - __le16 sequence; -} __packed; - -/* - * definitions for initial rate index field - * bits [3:0] initial rate index - * bits [6:4] rate table color, used for the initial rate - * bit-7 invalid rate indication - * i.e. rate was not chosen from rate table - * or rate table color was changed during frame retries - * refer tlc rate info - */ - -#define IWL50_TX_RES_INIT_RATE_INDEX_POS 0 -#define IWL50_TX_RES_INIT_RATE_INDEX_MSK 0x0f -#define IWL50_TX_RES_RATE_TABLE_COLOR_POS 4 -#define IWL50_TX_RES_RATE_TABLE_COLOR_MSK 0x70 -#define IWL50_TX_RES_INV_RATE_INDEX_MSK 0x80 - -/* refer to ra_tid */ -#define IWLAGN_TX_RES_TID_POS 0 -#define IWLAGN_TX_RES_TID_MSK 0x0f -#define IWLAGN_TX_RES_RA_POS 4 -#define IWLAGN_TX_RES_RA_MSK 0xf0 - -struct iwlagn_tx_resp { - u8 frame_count; /* 1 no aggregation, >1 aggregation */ - u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */ - u8 failure_rts; /* # failures due to unsuccessful RTS */ - u8 failure_frame; /* # failures due to no ACK (unused for agg) */ - - /* For non-agg: Rate at which frame was successful. - * For agg: Rate at which all frames were transmitted. */ - __le32 rate_n_flags; /* RATE_MCS_* */ - - /* For non-agg: RTS + CTS + frame tx attempts time + ACK. - * For agg: RTS + CTS + aggregation tx time + block-ack time. */ - __le16 wireless_media_time; /* uSecs */ - - u8 pa_status; /* RF power amplifier measurement (not used) */ - u8 pa_integ_res_a[3]; - u8 pa_integ_res_b[3]; - u8 pa_integ_res_C[3]; - - __le32 tfd_info; - __le16 seq_ctl; - __le16 byte_cnt; - u8 tlc_info; - u8 ra_tid; /* tid (0:3), sta_id (4:7) */ - __le16 frame_ctrl; - /* - * For non-agg: frame status TX_STATUS_* - * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status - * fields follow this one, up to frame_count. - * Bit fields: - * 11- 0: AGG_TX_STATE_* status code - * 15-12: Retry count for 1st frame in aggregation (retries - * occur if tx failed for this frame when it was a - * member of a previous aggregation block). If rate - * scaling is used, retry count indicates the rate - * table entry used for all frames in the new agg. - * 31-16: Sequence # for this frame's Tx cmd (not SSN!) - */ - struct agg_tx_status status; /* TX status (in aggregation - - * status of 1st frame) */ -} __packed; -/* - * REPLY_COMPRESSED_BA = 0xc5 (response only, not a command) - * - * Reports Block-Acknowledge from recipient station - */ -struct iwl_compressed_ba_resp { - __le32 sta_addr_lo32; - __le16 sta_addr_hi16; - __le16 reserved; - - /* Index of recipient (BA-sending) station in uCode's station table */ - u8 sta_id; - u8 tid; - __le16 seq_ctl; - __le64 bitmap; - __le16 scd_flow; - __le16 scd_ssn; - u8 txed; /* number of frames sent */ - u8 txed_2_done; /* number of frames acked */ -} __packed; - -/* - * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response) - * - */ - -/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */ -#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0) - -/* # of EDCA prioritized tx fifos */ -#define LINK_QUAL_AC_NUM AC_NUM - -/* # entries in rate scale table to support Tx retries */ -#define LINK_QUAL_MAX_RETRY_NUM 16 - -/* Tx antenna selection values */ -#define LINK_QUAL_ANT_A_MSK (1 << 0) -#define LINK_QUAL_ANT_B_MSK (1 << 1) -#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK) - - -/** - * struct iwl_link_qual_general_params - * - * Used in REPLY_TX_LINK_QUALITY_CMD - */ -struct iwl_link_qual_general_params { - u8 flags; - - /* No entries at or above this (driver chosen) index contain MIMO */ - u8 mimo_delimiter; - - /* Best single antenna to use for single stream (legacy, SISO). */ - u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */ - - /* Best antennas to use for MIMO (unused for 4965, assumes both). */ - u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */ - - /* - * If driver needs to use different initial rates for different - * EDCA QOS access categories (as implemented by tx fifos 0-3), - * this table will set that up, by indicating the indexes in the - * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start. - * Otherwise, driver should set all entries to 0. - * - * Entry usage: - * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice - * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3. - */ - u8 start_rate_index[LINK_QUAL_AC_NUM]; -} __packed; - -#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ -#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000) -#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100) - -#define LINK_QUAL_AGG_DISABLE_START_DEF (3) -#define LINK_QUAL_AGG_DISABLE_START_MAX (255) -#define LINK_QUAL_AGG_DISABLE_START_MIN (0) - -#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63) -#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) -#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) - -/** - * struct iwl_link_qual_agg_params - * - * Used in REPLY_TX_LINK_QUALITY_CMD - */ -struct iwl_link_qual_agg_params { - - /* - *Maximum number of uSec in aggregation. - * default set to 4000 (4 milliseconds) if not configured in .cfg - */ - __le16 agg_time_limit; - - /* - * Number of Tx retries allowed for a frame, before that frame will - * no longer be considered for the start of an aggregation sequence - * (scheduler will then try to tx it as single frame). - * Driver should set this to 3. - */ - u8 agg_dis_start_th; - - /* - * Maximum number of frames in aggregation. - * 0 = no limit (default). 1 = no aggregation. - * Other values = max # frames in aggregation. - */ - u8 agg_frame_cnt_limit; - - __le32 reserved; -} __packed; - -/* - * REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response) - * - * For agn devices - * - * Each station in the agn device's internal station table has its own table - * of 16 - * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when - * an ACK is not received. This command replaces the entire table for - * one station. - * - * NOTE: Station must already be in agn device's station table. - * Use REPLY_ADD_STA. - * - * The rate scaling procedures described below work well. Of course, other - * procedures are possible, and may work better for particular environments. - * - * - * FILLING THE RATE TABLE - * - * Given a particular initial rate and mode, as determined by the rate - * scaling algorithm described below, the Linux driver uses the following - * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the - * Link Quality command: - * - * - * 1) If using High-throughput (HT) (SISO or MIMO) initial rate: - * a) Use this same initial rate for first 3 entries. - * b) Find next lower available rate using same mode (SISO or MIMO), - * use for next 3 entries. If no lower rate available, switch to - * legacy mode (no HT40 channel, no MIMO, no short guard interval). - * c) If using MIMO, set command's mimo_delimiter to number of entries - * using MIMO (3 or 6). - * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel, - * no MIMO, no short guard interval), at the next lower bit rate - * (e.g. if second HT bit rate was 54, try 48 legacy), and follow - * legacy procedure for remaining table entries. - * - * 2) If using legacy initial rate: - * a) Use the initial rate for only one entry. - * b) For each following entry, reduce the rate to next lower available - * rate, until reaching the lowest available rate. - * c) When reducing rate, also switch antenna selection. - * d) Once lowest available rate is reached, repeat this rate until - * rate table is filled (16 entries), switching antenna each entry. - * - * - * ACCUMULATING HISTORY - * - * The rate scaling algorithm for agn devices, as implemented in Linux driver, - * uses two sets of frame Tx success history: One for the current/active - * modulation mode, and one for a speculative/search mode that is being - * attempted. If the speculative mode turns out to be more effective (i.e. - * actual transfer rate is better), then the driver continues to use the - * speculative mode as the new current active mode. - * - * Each history set contains, separately for each possible rate, data for a - * sliding window of the 62 most recent tx attempts at that rate. The data - * includes a shifting bitmap of success(1)/failure(0), and sums of successful - * and attempted frames, from which the driver can additionally calculate a - * success ratio (success / attempted) and number of failures - * (attempted - success), and control the size of the window (attempted). - * The driver uses the bit map to remove successes from the success sum, as - * the oldest tx attempts fall out of the window. - * - * When the agn device makes multiple tx attempts for a given frame, each - * attempt might be at a different rate, and have different modulation - * characteristics (e.g. antenna, fat channel, short guard interval), as set - * up in the rate scaling table in the Link Quality command. The driver must - * determine which rate table entry was used for each tx attempt, to determine - * which rate-specific history to update, and record only those attempts that - * match the modulation characteristics of the history set. - * - * When using block-ack (aggregation), all frames are transmitted at the same - * rate, since there is no per-attempt acknowledgment from the destination - * station. The Tx response struct iwl_tx_resp indicates the Tx rate in - * rate_n_flags field. After receiving a block-ack, the driver can update - * history for the entire block all at once. - * - * - * FINDING BEST STARTING RATE: - * - * When working with a selected initial modulation mode (see below), the - * driver attempts to find a best initial rate. The initial rate is the - * first entry in the Link Quality command's rate table. - * - * 1) Calculate actual throughput (success ratio * expected throughput, see - * table below) for current initial rate. Do this only if enough frames - * have been attempted to make the value meaningful: at least 6 failed - * tx attempts, or at least 8 successes. If not enough, don't try rate - * scaling yet. - * - * 2) Find available rates adjacent to current initial rate. Available means: - * a) supported by hardware && - * b) supported by association && - * c) within any constraints selected by user - * - * 3) Gather measured throughputs for adjacent rates. These might not have - * enough history to calculate a throughput. That's okay, we might try - * using one of them anyway! - * - * 4) Try decreasing rate if, for current rate: - * a) success ratio is < 15% || - * b) lower adjacent rate has better measured throughput || - * c) higher adjacent rate has worse throughput, and lower is unmeasured - * - * As a sanity check, if decrease was determined above, leave rate - * unchanged if: - * a) lower rate unavailable - * b) success ratio at current rate > 85% (very good) - * c) current measured throughput is better than expected throughput - * of lower rate (under perfect 100% tx conditions, see table below) - * - * 5) Try increasing rate if, for current rate: - * a) success ratio is < 15% || - * b) both adjacent rates' throughputs are unmeasured (try it!) || - * b) higher adjacent rate has better measured throughput || - * c) lower adjacent rate has worse throughput, and higher is unmeasured - * - * As a sanity check, if increase was determined above, leave rate - * unchanged if: - * a) success ratio at current rate < 70%. This is not particularly - * good performance; higher rate is sure to have poorer success. - * - * 6) Re-evaluate the rate after each tx frame. If working with block- - * acknowledge, history and statistics may be calculated for the entire - * block (including prior history that fits within the history windows), - * before re-evaluation. - * - * FINDING BEST STARTING MODULATION MODE: - * - * After working with a modulation mode for a "while" (and doing rate scaling), - * the driver searches for a new initial mode in an attempt to improve - * throughput. The "while" is measured by numbers of attempted frames: - * - * For legacy mode, search for new mode after: - * 480 successful frames, or 160 failed frames - * For high-throughput modes (SISO or MIMO), search for new mode after: - * 4500 successful frames, or 400 failed frames - * - * Mode switch possibilities are (3 for each mode): - * - * For legacy: - * Change antenna, try SISO (if HT association), try MIMO (if HT association) - * For SISO: - * Change antenna, try MIMO, try shortened guard interval (SGI) - * For MIMO: - * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI) - * - * When trying a new mode, use the same bit rate as the old/current mode when - * trying antenna switches and shortened guard interval. When switching to - * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate - * for which the expected throughput (under perfect conditions) is about the - * same or slightly better than the actual measured throughput delivered by - * the old/current mode. - * - * Actual throughput can be estimated by multiplying the expected throughput - * by the success ratio (successful / attempted tx frames). Frame size is - * not considered in this calculation; it assumes that frame size will average - * out to be fairly consistent over several samples. The following are - * metric values for expected throughput assuming 100% success ratio. - * Only G band has support for CCK rates: - * - * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60 - * - * G: 7 13 35 58 40 57 72 98 121 154 177 186 186 - * A: 0 0 0 0 40 57 72 98 121 154 177 186 186 - * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202 - * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211 - * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251 - * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257 - * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257 - * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264 - * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289 - * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293 - * - * After the new mode has been tried for a short while (minimum of 6 failed - * frames or 8 successful frames), compare success ratio and actual throughput - * estimate of the new mode with the old. If either is better with the new - * mode, continue to use the new mode. - * - * Continue comparing modes until all 3 possibilities have been tried. - * If moving from legacy to HT, try all 3 possibilities from the new HT - * mode. After trying all 3, a best mode is found. Continue to use this mode - * for the longer "while" described above (e.g. 480 successful frames for - * legacy), and then repeat the search process. - * - */ -struct iwl_link_quality_cmd { - - /* Index of destination/recipient station in uCode's station table */ - u8 sta_id; - u8 reserved1; - __le16 control; /* not used */ - struct iwl_link_qual_general_params general_params; - struct iwl_link_qual_agg_params agg_params; - - /* - * Rate info; when using rate-scaling, Tx command's initial_rate_index - * specifies 1st Tx rate attempted, via index into this table. - * agn devices works its way through table when retrying Tx. - */ - struct { - __le32 rate_n_flags; /* RATE_MCS_*, IWL_RATE_* */ - } rs_table[LINK_QUAL_MAX_RETRY_NUM]; - __le32 reserved2; -} __packed; - -/* - * BT configuration enable flags: - * bit 0 - 1: BT channel announcement enabled - * 0: disable - * bit 1 - 1: priority of BT device enabled - * 0: disable - * bit 2 - 1: BT 2 wire support enabled - * 0: disable - */ -#define BT_COEX_DISABLE (0x0) -#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0) -#define BT_ENABLE_PRIORITY BIT(1) -#define BT_ENABLE_2_WIRE BIT(2) - -#define BT_COEX_DISABLE (0x0) -#define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY) - -#define BT_LEAD_TIME_MIN (0x0) -#define BT_LEAD_TIME_DEF (0x1E) -#define BT_LEAD_TIME_MAX (0xFF) - -#define BT_MAX_KILL_MIN (0x1) -#define BT_MAX_KILL_DEF (0x5) -#define BT_MAX_KILL_MAX (0xFF) - -#define BT_DURATION_LIMIT_DEF 625 -#define BT_DURATION_LIMIT_MAX 1250 -#define BT_DURATION_LIMIT_MIN 625 - -#define BT_ON_THRESHOLD_DEF 4 -#define BT_ON_THRESHOLD_MAX 1000 -#define BT_ON_THRESHOLD_MIN 1 - -#define BT_FRAG_THRESHOLD_DEF 0 -#define BT_FRAG_THRESHOLD_MAX 0 -#define BT_FRAG_THRESHOLD_MIN 0 - -#define BT_AGG_THRESHOLD_DEF 1200 -#define BT_AGG_THRESHOLD_MAX 8000 -#define BT_AGG_THRESHOLD_MIN 400 - -/* - * REPLY_BT_CONFIG = 0x9b (command, has simple generic response) - * - * agn devices support hardware handshake with Bluetooth device on - * same platform. Bluetooth device alerts wireless device when it will Tx; - * wireless device can delay or kill its own Tx to accommodate. - */ -struct iwl_bt_cmd { - u8 flags; - u8 lead_time; - u8 max_kill; - u8 reserved; - __le32 kill_ack_mask; - __le32 kill_cts_mask; -} __packed; - -#define IWLAGN_BT_FLAG_CHANNEL_INHIBITION BIT(0) - -#define IWLAGN_BT_FLAG_COEX_MODE_MASK (BIT(3)|BIT(4)|BIT(5)) -#define IWLAGN_BT_FLAG_COEX_MODE_SHIFT 3 -#define IWLAGN_BT_FLAG_COEX_MODE_DISABLED 0 -#define IWLAGN_BT_FLAG_COEX_MODE_LEGACY_2W 1 -#define IWLAGN_BT_FLAG_COEX_MODE_3W 2 -#define IWLAGN_BT_FLAG_COEX_MODE_4W 3 - -#define IWLAGN_BT_FLAG_UCODE_DEFAULT BIT(6) -/* Disable Sync PSPoll on SCO/eSCO */ -#define IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE BIT(7) - -#define IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD -75 /* dBm */ -#define IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD -65 /* dBm */ - -#define IWLAGN_BT_PRIO_BOOST_MAX 0xFF -#define IWLAGN_BT_PRIO_BOOST_MIN 0x00 -#define IWLAGN_BT_PRIO_BOOST_DEFAULT 0xF0 - -#define IWLAGN_BT_MAX_KILL_DEFAULT 5 - -#define IWLAGN_BT3_T7_DEFAULT 1 - -#define IWLAGN_BT_KILL_ACK_MASK_DEFAULT cpu_to_le32(0xffff0000) -#define IWLAGN_BT_KILL_CTS_MASK_DEFAULT cpu_to_le32(0xffff0000) -#define IWLAGN_BT_KILL_ACK_CTS_MASK_SCO cpu_to_le32(0xffffffff) - -#define IWLAGN_BT3_PRIO_SAMPLE_DEFAULT 2 - -#define IWLAGN_BT3_T2_DEFAULT 0xc - -#define IWLAGN_BT_VALID_ENABLE_FLAGS cpu_to_le16(BIT(0)) -#define IWLAGN_BT_VALID_BOOST cpu_to_le16(BIT(1)) -#define IWLAGN_BT_VALID_MAX_KILL cpu_to_le16(BIT(2)) -#define IWLAGN_BT_VALID_3W_TIMERS cpu_to_le16(BIT(3)) -#define IWLAGN_BT_VALID_KILL_ACK_MASK cpu_to_le16(BIT(4)) -#define IWLAGN_BT_VALID_KILL_CTS_MASK cpu_to_le16(BIT(5)) -#define IWLAGN_BT_VALID_BT4_TIMES cpu_to_le16(BIT(6)) -#define IWLAGN_BT_VALID_3W_LUT cpu_to_le16(BIT(7)) - -#define IWLAGN_BT_ALL_VALID_MSK (IWLAGN_BT_VALID_ENABLE_FLAGS | \ - IWLAGN_BT_VALID_BOOST | \ - IWLAGN_BT_VALID_MAX_KILL | \ - IWLAGN_BT_VALID_3W_TIMERS | \ - IWLAGN_BT_VALID_KILL_ACK_MASK | \ - IWLAGN_BT_VALID_KILL_CTS_MASK | \ - IWLAGN_BT_VALID_BT4_TIMES | \ - IWLAGN_BT_VALID_3W_LUT) - -struct iwl_basic_bt_cmd { - u8 flags; - u8 ledtime; /* unused */ - u8 max_kill; - u8 bt3_timer_t7_value; - __le32 kill_ack_mask; - __le32 kill_cts_mask; - u8 bt3_prio_sample_time; - u8 bt3_timer_t2_value; - __le16 bt4_reaction_time; /* unused */ - __le32 bt3_lookup_table[12]; - __le16 bt4_decision_time; /* unused */ - __le16 valid; -}; - -struct iwl6000_bt_cmd { - struct iwl_basic_bt_cmd basic; - u8 prio_boost; - /* - * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask - * if configure the following patterns - */ - u8 tx_prio_boost; /* SW boost of WiFi tx priority */ - __le16 rx_prio_boost; /* SW boost of WiFi rx priority */ -}; - -struct iwl2000_bt_cmd { - struct iwl_basic_bt_cmd basic; - __le32 prio_boost; - /* - * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask - * if configure the following patterns - */ - u8 reserved; - u8 tx_prio_boost; /* SW boost of WiFi tx priority */ - __le16 rx_prio_boost; /* SW boost of WiFi rx priority */ -}; - -#define IWLAGN_BT_SCO_ACTIVE cpu_to_le32(BIT(0)) - -struct iwlagn_bt_sco_cmd { - __le32 flags; -}; - -/****************************************************************************** - * (6) - * Spectrum Management (802.11h) Commands, Responses, Notifications: - * - *****************************************************************************/ - -/* - * Spectrum Management - */ -#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \ - RXON_FILTER_CTL2HOST_MSK | \ - RXON_FILTER_ACCEPT_GRP_MSK | \ - RXON_FILTER_DIS_DECRYPT_MSK | \ - RXON_FILTER_DIS_GRP_DECRYPT_MSK | \ - RXON_FILTER_ASSOC_MSK | \ - RXON_FILTER_BCON_AWARE_MSK) - -struct iwl_measure_channel { - __le32 duration; /* measurement duration in extended beacon - * format */ - u8 channel; /* channel to measure */ - u8 type; /* see enum iwl_measure_type */ - __le16 reserved; -} __packed; - -/* - * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command) - */ -struct iwl_spectrum_cmd { - __le16 len; /* number of bytes starting from token */ - u8 token; /* token id */ - u8 id; /* measurement id -- 0 or 1 */ - u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */ - u8 periodic; /* 1 = periodic */ - __le16 path_loss_timeout; - __le32 start_time; /* start time in extended beacon format */ - __le32 reserved2; - __le32 flags; /* rxon flags */ - __le32 filter_flags; /* rxon filter flags */ - __le16 channel_count; /* minimum 1, maximum 10 */ - __le16 reserved3; - struct iwl_measure_channel channels[10]; -} __packed; - -/* - * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response) - */ -struct iwl_spectrum_resp { - u8 token; - u8 id; /* id of the prior command replaced, or 0xff */ - __le16 status; /* 0 - command will be handled - * 1 - cannot handle (conflicts with another - * measurement) */ -} __packed; - -enum iwl_measurement_state { - IWL_MEASUREMENT_START = 0, - IWL_MEASUREMENT_STOP = 1, -}; - -enum iwl_measurement_status { - IWL_MEASUREMENT_OK = 0, - IWL_MEASUREMENT_CONCURRENT = 1, - IWL_MEASUREMENT_CSA_CONFLICT = 2, - IWL_MEASUREMENT_TGH_CONFLICT = 3, - /* 4-5 reserved */ - IWL_MEASUREMENT_STOPPED = 6, - IWL_MEASUREMENT_TIMEOUT = 7, - IWL_MEASUREMENT_PERIODIC_FAILED = 8, -}; - -#define NUM_ELEMENTS_IN_HISTOGRAM 8 - -struct iwl_measurement_histogram { - __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */ - __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */ -} __packed; - -/* clear channel availability counters */ -struct iwl_measurement_cca_counters { - __le32 ofdm; - __le32 cck; -} __packed; - -enum iwl_measure_type { - IWL_MEASURE_BASIC = (1 << 0), - IWL_MEASURE_CHANNEL_LOAD = (1 << 1), - IWL_MEASURE_HISTOGRAM_RPI = (1 << 2), - IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3), - IWL_MEASURE_FRAME = (1 << 4), - /* bits 5:6 are reserved */ - IWL_MEASURE_IDLE = (1 << 7), -}; - -/* - * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command) - */ -struct iwl_spectrum_notification { - u8 id; /* measurement id -- 0 or 1 */ - u8 token; - u8 channel_index; /* index in measurement channel list */ - u8 state; /* 0 - start, 1 - stop */ - __le32 start_time; /* lower 32-bits of TSF */ - u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */ - u8 channel; - u8 type; /* see enum iwl_measurement_type */ - u8 reserved1; - /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only - * valid if applicable for measurement type requested. */ - __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */ - __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */ - __le32 cca_time; /* channel load time in usecs */ - u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 - - * unidentified */ - u8 reserved2[3]; - struct iwl_measurement_histogram histogram; - __le32 stop_time; /* lower 32-bits of TSF */ - __le32 status; /* see iwl_measurement_status */ -} __packed; - -/****************************************************************************** - * (7) - * Power Management Commands, Responses, Notifications: - * - *****************************************************************************/ - -/** - * struct iwl_powertable_cmd - Power Table Command - * @flags: See below: - * - * POWER_TABLE_CMD = 0x77 (command, has simple generic response) - * - * PM allow: - * bit 0 - '0' Driver not allow power management - * '1' Driver allow PM (use rest of parameters) - * - * uCode send sleep notifications: - * bit 1 - '0' Don't send sleep notification - * '1' send sleep notification (SEND_PM_NOTIFICATION) - * - * Sleep over DTIM - * bit 2 - '0' PM have to walk up every DTIM - * '1' PM could sleep over DTIM till listen Interval. - * - * PCI power managed - * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1) - * '1' !(PCI_CFG_LINK_CTRL & 0x1) - * - * Fast PD - * bit 4 - '1' Put radio to sleep when receiving frame for others - * - * Force sleep Modes - * bit 31/30- '00' use both mac/xtal sleeps - * '01' force Mac sleep - * '10' force xtal sleep - * '11' Illegal set - * - * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then - * ucode assume sleep over DTIM is allowed and we don't need to wake up - * for every DTIM. - */ -#define IWL_POWER_VEC_SIZE 5 - -#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0)) -#define IWL_POWER_POWER_SAVE_ENA_MSK cpu_to_le16(BIT(0)) -#define IWL_POWER_POWER_MANAGEMENT_ENA_MSK cpu_to_le16(BIT(1)) -#define IWL_POWER_SLEEP_OVER_DTIM_MSK cpu_to_le16(BIT(2)) -#define IWL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3)) -#define IWL_POWER_FAST_PD cpu_to_le16(BIT(4)) -#define IWL_POWER_BEACON_FILTERING cpu_to_le16(BIT(5)) -#define IWL_POWER_SHADOW_REG_ENA cpu_to_le16(BIT(6)) -#define IWL_POWER_CT_KILL_SET cpu_to_le16(BIT(7)) -#define IWL_POWER_BT_SCO_ENA cpu_to_le16(BIT(8)) -#define IWL_POWER_ADVANCE_PM_ENA_MSK cpu_to_le16(BIT(9)) - -struct iwl_powertable_cmd { - __le16 flags; - u8 keep_alive_seconds; - u8 debug_flags; - __le32 rx_data_timeout; - __le32 tx_data_timeout; - __le32 sleep_interval[IWL_POWER_VEC_SIZE]; - __le32 keep_alive_beacons; -} __packed; - -/* - * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command) - * all devices identical. - */ -struct iwl_sleep_notification { - u8 pm_sleep_mode; - u8 pm_wakeup_src; - __le16 reserved; - __le32 sleep_time; - __le32 tsf_low; - __le32 bcon_timer; -} __packed; - -/* Sleep states. all devices identical. */ -enum { - IWL_PM_NO_SLEEP = 0, - IWL_PM_SLP_MAC = 1, - IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2, - IWL_PM_SLP_FULL_MAC_CARD_STATE = 3, - IWL_PM_SLP_PHY = 4, - IWL_PM_SLP_REPENT = 5, - IWL_PM_WAKEUP_BY_TIMER = 6, - IWL_PM_WAKEUP_BY_DRIVER = 7, - IWL_PM_WAKEUP_BY_RFKILL = 8, - /* 3 reserved */ - IWL_PM_NUM_OF_MODES = 12, -}; - -/* - * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response) - */ -#define CARD_STATE_CMD_DISABLE 0x00 /* Put card to sleep */ -#define CARD_STATE_CMD_ENABLE 0x01 /* Wake up card */ -#define CARD_STATE_CMD_HALT 0x02 /* Power down permanently */ -struct iwl_card_state_cmd { - __le32 status; /* CARD_STATE_CMD_* request new power state */ -} __packed; - -/* - * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command) - */ -struct iwl_card_state_notif { - __le32 flags; -} __packed; - -#define HW_CARD_DISABLED 0x01 -#define SW_CARD_DISABLED 0x02 -#define CT_CARD_DISABLED 0x04 -#define RXON_CARD_DISABLED 0x10 - -struct iwl_ct_kill_config { - __le32 reserved; - __le32 critical_temperature_M; - __le32 critical_temperature_R; -} __packed; - -/* 1000, and 6x00 */ -struct iwl_ct_kill_throttling_config { - __le32 critical_temperature_exit; - __le32 reserved; - __le32 critical_temperature_enter; -} __packed; - -/****************************************************************************** - * (8) - * Scan Commands, Responses, Notifications: - * - *****************************************************************************/ - -#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0) -#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1) - -/** - * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table - * - * One for each channel in the scan list. - * Each channel can independently select: - * 1) SSID for directed active scans - * 2) Txpower setting (for rate specified within Tx command) - * 3) How long to stay on-channel (behavior may be modified by quiet_time, - * quiet_plcp_th, good_CRC_th) - * - * To avoid uCode errors, make sure the following are true (see comments - * under struct iwl_scan_cmd about max_out_time and quiet_time): - * 1) If using passive_dwell (i.e. passive_dwell != 0): - * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0) - * 2) quiet_time <= active_dwell - * 3) If restricting off-channel time (i.e. max_out_time !=0): - * passive_dwell < max_out_time - * active_dwell < max_out_time - */ - -struct iwl_scan_channel { - /* - * type is defined as: - * 0:0 1 = active, 0 = passive - * 1:20 SSID direct bit map; if a bit is set, then corresponding - * SSID IE is transmitted in probe request. - * 21:31 reserved - */ - __le32 type; - __le16 channel; /* band is selected by iwl_scan_cmd "flags" field */ - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ - __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ - __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ -} __packed; - -/* set number of direct probes __le32 type */ -#define IWL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1)))) - -/** - * struct iwl_ssid_ie - directed scan network information element - * - * Up to 20 of these may appear in REPLY_SCAN_CMD, - * selected by "type" bit field in struct iwl_scan_channel; - * each channel may select different ssids from among the 20 entries. - * SSID IEs get transmitted in reverse order of entry. - */ -struct iwl_ssid_ie { - u8 id; - u8 len; - u8 ssid[32]; -} __packed; - -#define PROBE_OPTION_MAX 20 -#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF) -#define IWL_GOOD_CRC_TH_DISABLED 0 -#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) -#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff) -#define IWL_MAX_SCAN_SIZE 1024 -#define IWL_MAX_CMD_SIZE 4096 - -/* - * REPLY_SCAN_CMD = 0x80 (command) - * - * The hardware scan command is very powerful; the driver can set it up to - * maintain (relatively) normal network traffic while doing a scan in the - * background. The max_out_time and suspend_time control the ratio of how - * long the device stays on an associated network channel ("service channel") - * vs. how long it's away from the service channel, i.e. tuned to other channels - * for scanning. - * - * max_out_time is the max time off-channel (in usec), and suspend_time - * is how long (in "extended beacon" format) that the scan is "suspended" - * after returning to the service channel. That is, suspend_time is the - * time that we stay on the service channel, doing normal work, between - * scan segments. The driver may set these parameters differently to support - * scanning when associated vs. not associated, and light vs. heavy traffic - * loads when associated. - * - * After receiving this command, the device's scan engine does the following; - * - * 1) Sends SCAN_START notification to driver - * 2) Checks to see if it has time to do scan for one channel - * 3) Sends NULL packet, with power-save (PS) bit set to 1, - * to tell AP that we're going off-channel - * 4) Tunes to first channel in scan list, does active or passive scan - * 5) Sends SCAN_RESULT notification to driver - * 6) Checks to see if it has time to do scan on *next* channel in list - * 7) Repeats 4-6 until it no longer has time to scan the next channel - * before max_out_time expires - * 8) Returns to service channel - * 9) Sends NULL packet with PS=0 to tell AP that we're back - * 10) Stays on service channel until suspend_time expires - * 11) Repeats entire process 2-10 until list is complete - * 12) Sends SCAN_COMPLETE notification - * - * For fast, efficient scans, the scan command also has support for staying on - * a channel for just a short time, if doing active scanning and getting no - * responses to the transmitted probe request. This time is controlled by - * quiet_time, and the number of received packets below which a channel is - * considered "quiet" is controlled by quiet_plcp_threshold. - * - * For active scanning on channels that have regulatory restrictions against - * blindly transmitting, the scan can listen before transmitting, to make sure - * that there is already legitimate activity on the channel. If enough - * packets are cleanly received on the channel (controlled by good_CRC_th, - * typical value 1), the scan engine starts transmitting probe requests. - * - * Driver must use separate scan commands for 2.4 vs. 5 GHz bands. - * - * To avoid uCode errors, see timing restrictions described under - * struct iwl_scan_channel. - */ - -enum iwl_scan_flags { - /* BIT(0) currently unused */ - IWL_SCAN_FLAGS_ACTION_FRAME_TX = BIT(1), - /* bits 2-7 reserved */ -}; - -struct iwl_scan_cmd { - __le16 len; - u8 scan_flags; /* scan flags: see enum iwl_scan_flags */ - u8 channel_count; /* # channels in channel list */ - __le16 quiet_time; /* dwell only this # millisecs on quiet channel - * (only for active scan) */ - __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */ - __le16 good_CRC_th; /* passive -> active promotion threshold */ - __le16 rx_chain; /* RXON_RX_CHAIN_* */ - __le32 max_out_time; /* max usec to be away from associated (service) - * channel */ - __le32 suspend_time; /* pause scan this long (in "extended beacon - * format") when returning to service chnl: - */ - __le32 flags; /* RXON_FLG_* */ - __le32 filter_flags; /* RXON_FILTER_* */ - - /* For active scans (set to all-0s for passive scans). - * Does not include payload. Must specify Tx rate; no rate scaling. */ - struct iwl_tx_cmd tx_cmd; - - /* For directed active scans (set to all-0s otherwise) */ - struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX]; - - /* - * Probe request frame, followed by channel list. - * - * Size of probe request frame is specified by byte count in tx_cmd. - * Channel list follows immediately after probe request frame. - * Number of channels in list is specified by channel_count. - * Each channel in list is of type: - * - * struct iwl_scan_channel channels[0]; - * - * NOTE: Only one band of channels can be scanned per pass. You - * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait - * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION) - * before requesting another scan. - */ - u8 data[0]; -} __packed; - -/* Can abort will notify by complete notification with abort status. */ -#define CAN_ABORT_STATUS cpu_to_le32(0x1) -/* complete notification statuses */ -#define ABORT_STATUS 0x2 - -/* - * REPLY_SCAN_CMD = 0x80 (response) - */ -struct iwl_scanreq_notification { - __le32 status; /* 1: okay, 2: cannot fulfill request */ -} __packed; - -/* - * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command) - */ -struct iwl_scanstart_notification { - __le32 tsf_low; - __le32 tsf_high; - __le32 beacon_timer; - u8 channel; - u8 band; - u8 reserved[2]; - __le32 status; -} __packed; - -#define SCAN_OWNER_STATUS 0x1 -#define MEASURE_OWNER_STATUS 0x2 - -#define IWL_PROBE_STATUS_OK 0 -#define IWL_PROBE_STATUS_TX_FAILED BIT(0) -/* error statuses combined with TX_FAILED */ -#define IWL_PROBE_STATUS_FAIL_TTL BIT(1) -#define IWL_PROBE_STATUS_FAIL_BT BIT(2) - -#define NUMBER_OF_STATISTICS 1 /* first __le32 is good CRC */ -/* - * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command) - */ -struct iwl_scanresults_notification { - u8 channel; - u8 band; - u8 probe_status; - u8 num_probe_not_sent; /* not enough time to send */ - __le32 tsf_low; - __le32 tsf_high; - __le32 statistics[NUMBER_OF_STATISTICS]; -} __packed; - -/* - * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command) - */ -struct iwl_scancomplete_notification { - u8 scanned_channels; - u8 status; - u8 bt_status; /* BT On/Off status */ - u8 last_channel; - __le32 tsf_low; - __le32 tsf_high; -} __packed; - - -/****************************************************************************** - * (9) - * IBSS/AP Commands and Notifications: - * - *****************************************************************************/ - -enum iwl_ibss_manager { - IWL_NOT_IBSS_MANAGER = 0, - IWL_IBSS_MANAGER = 1, -}; - -/* - * BEACON_NOTIFICATION = 0x90 (notification only, not a command) - */ - -struct iwlagn_beacon_notif { - struct iwlagn_tx_resp beacon_notify_hdr; - __le32 low_tsf; - __le32 high_tsf; - __le32 ibss_mgr_status; -} __packed; - -/* - * REPLY_TX_BEACON = 0x91 (command, has simple generic response) - */ - -struct iwl_tx_beacon_cmd { - struct iwl_tx_cmd tx; - __le16 tim_idx; - u8 tim_size; - u8 reserved1; - struct ieee80211_hdr frame[0]; /* beacon frame */ -} __packed; - -/****************************************************************************** - * (10) - * Statistics Commands and Notifications: - * - *****************************************************************************/ - -#define IWL_TEMP_CONVERT 260 - -#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 -#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 -#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 - -/* Used for passing to driver number of successes and failures per rate */ -struct rate_histogram { - union { - __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; - __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; - __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; - } success; - union { - __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS]; - __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS]; - __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS]; - } failed; -} __packed; - -/* statistics command response */ - -struct statistics_dbg { - __le32 burst_check; - __le32 burst_count; - __le32 wait_for_silence_timeout_cnt; - __le32 reserved[3]; -} __packed; - -struct statistics_rx_phy { - __le32 ina_cnt; - __le32 fina_cnt; - __le32 plcp_err; - __le32 crc32_err; - __le32 overrun_err; - __le32 early_overrun_err; - __le32 crc32_good; - __le32 false_alarm_cnt; - __le32 fina_sync_err_cnt; - __le32 sfd_timeout; - __le32 fina_timeout; - __le32 unresponded_rts; - __le32 rxe_frame_limit_overrun; - __le32 sent_ack_cnt; - __le32 sent_cts_cnt; - __le32 sent_ba_rsp_cnt; - __le32 dsp_self_kill; - __le32 mh_format_err; - __le32 re_acq_main_rssi_sum; - __le32 reserved3; -} __packed; - -struct statistics_rx_ht_phy { - __le32 plcp_err; - __le32 overrun_err; - __le32 early_overrun_err; - __le32 crc32_good; - __le32 crc32_err; - __le32 mh_format_err; - __le32 agg_crc32_good; - __le32 agg_mpdu_cnt; - __le32 agg_cnt; - __le32 unsupport_mcs; -} __packed; - -#define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1) - -struct statistics_rx_non_phy { - __le32 bogus_cts; /* CTS received when not expecting CTS */ - __le32 bogus_ack; /* ACK received when not expecting ACK */ - __le32 non_bssid_frames; /* number of frames with BSSID that - * doesn't belong to the STA BSSID */ - __le32 filtered_frames; /* count frames that were dumped in the - * filtering process */ - __le32 non_channel_beacons; /* beacons with our bss id but not on - * our serving channel */ - __le32 channel_beacons; /* beacons with our bss id and in our - * serving channel */ - __le32 num_missed_bcon; /* number of missed beacons */ - __le32 adc_rx_saturation_time; /* count in 0.8us units the time the - * ADC was in saturation */ - __le32 ina_detection_search_time;/* total time (in 0.8us) searched - * for INA */ - __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */ - __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */ - __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */ - __le32 interference_data_flag; /* flag for interference data - * availability. 1 when data is - * available. */ - __le32 channel_load; /* counts RX Enable time in uSec */ - __le32 dsp_false_alarms; /* DSP false alarm (both OFDM - * and CCK) counter */ - __le32 beacon_rssi_a; - __le32 beacon_rssi_b; - __le32 beacon_rssi_c; - __le32 beacon_energy_a; - __le32 beacon_energy_b; - __le32 beacon_energy_c; -} __packed; - -struct statistics_rx_non_phy_bt { - struct statistics_rx_non_phy common; - /* additional stats for bt */ - __le32 num_bt_kills; - __le32 reserved[2]; -} __packed; - -struct statistics_rx { - struct statistics_rx_phy ofdm; - struct statistics_rx_phy cck; - struct statistics_rx_non_phy general; - struct statistics_rx_ht_phy ofdm_ht; -} __packed; - -struct statistics_rx_bt { - struct statistics_rx_phy ofdm; - struct statistics_rx_phy cck; - struct statistics_rx_non_phy_bt general; - struct statistics_rx_ht_phy ofdm_ht; -} __packed; - -/** - * struct statistics_tx_power - current tx power - * - * @ant_a: current tx power on chain a in 1/2 dB step - * @ant_b: current tx power on chain b in 1/2 dB step - * @ant_c: current tx power on chain c in 1/2 dB step - */ -struct statistics_tx_power { - u8 ant_a; - u8 ant_b; - u8 ant_c; - u8 reserved; -} __packed; - -struct statistics_tx_non_phy_agg { - __le32 ba_timeout; - __le32 ba_reschedule_frames; - __le32 scd_query_agg_frame_cnt; - __le32 scd_query_no_agg; - __le32 scd_query_agg; - __le32 scd_query_mismatch; - __le32 frame_not_ready; - __le32 underrun; - __le32 bt_prio_kill; - __le32 rx_ba_rsp_cnt; -} __packed; - -struct statistics_tx { - __le32 preamble_cnt; - __le32 rx_detected_cnt; - __le32 bt_prio_defer_cnt; - __le32 bt_prio_kill_cnt; - __le32 few_bytes_cnt; - __le32 cts_timeout; - __le32 ack_timeout; - __le32 expected_ack_cnt; - __le32 actual_ack_cnt; - __le32 dump_msdu_cnt; - __le32 burst_abort_next_frame_mismatch_cnt; - __le32 burst_abort_missing_next_frame_cnt; - __le32 cts_timeout_collision; - __le32 ack_or_ba_timeout_collision; - struct statistics_tx_non_phy_agg agg; - /* - * "tx_power" are optional parameters provided by uCode, - * 6000 series is the only device provide the information, - * Those are reserved fields for all the other devices - */ - struct statistics_tx_power tx_power; - __le32 reserved1; -} __packed; - - -struct statistics_div { - __le32 tx_on_a; - __le32 tx_on_b; - __le32 exec_time; - __le32 probe_time; - __le32 reserved1; - __le32 reserved2; -} __packed; - -struct statistics_general_common { - __le32 temperature; /* radio temperature */ - __le32 temperature_m; /* radio voltage */ - struct statistics_dbg dbg; - __le32 sleep_time; - __le32 slots_out; - __le32 slots_idle; - __le32 ttl_timestamp; - struct statistics_div div; - __le32 rx_enable_counter; - /* - * num_of_sos_states: - * count the number of times we have to re-tune - * in order to get out of bad PHY status - */ - __le32 num_of_sos_states; -} __packed; - -struct statistics_bt_activity { - /* Tx statistics */ - __le32 hi_priority_tx_req_cnt; - __le32 hi_priority_tx_denied_cnt; - __le32 lo_priority_tx_req_cnt; - __le32 lo_priority_tx_denied_cnt; - /* Rx statistics */ - __le32 hi_priority_rx_req_cnt; - __le32 hi_priority_rx_denied_cnt; - __le32 lo_priority_rx_req_cnt; - __le32 lo_priority_rx_denied_cnt; -} __packed; - -struct statistics_general { - struct statistics_general_common common; - __le32 reserved2; - __le32 reserved3; -} __packed; - -struct statistics_general_bt { - struct statistics_general_common common; - struct statistics_bt_activity activity; - __le32 reserved2; - __le32 reserved3; -} __packed; - -#define UCODE_STATISTICS_CLEAR_MSK (0x1 << 0) -#define UCODE_STATISTICS_FREQUENCY_MSK (0x1 << 1) -#define UCODE_STATISTICS_NARROW_BAND_MSK (0x1 << 2) - -/* - * REPLY_STATISTICS_CMD = 0x9c, - * all devices identical. - * - * This command triggers an immediate response containing uCode statistics. - * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below. - * - * If the CLEAR_STATS configuration flag is set, uCode will clear its - * internal copy of the statistics (counters) after issuing the response. - * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below). - * - * If the DISABLE_NOTIF configuration flag is set, uCode will not issue - * STATISTICS_NOTIFICATIONs after received beacons (see below). This flag - * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself. - */ -#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */ -#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */ -struct iwl_statistics_cmd { - __le32 configuration_flags; /* IWL_STATS_CONF_* */ -} __packed; - -/* - * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command) - * - * By default, uCode issues this notification after receiving a beacon - * while associated. To disable this behavior, set DISABLE_NOTIF flag in the - * REPLY_STATISTICS_CMD 0x9c, above. - * - * Statistics counters continue to increment beacon after beacon, but are - * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD - * 0x9c with CLEAR_STATS bit set (see above). - * - * uCode also issues this notification during scans. uCode clears statistics - * appropriately so that each notification contains statistics for only the - * one channel that has just been scanned. - */ -#define STATISTICS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2) -#define STATISTICS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8) - -struct iwl_notif_statistics { - __le32 flag; - struct statistics_rx rx; - struct statistics_tx tx; - struct statistics_general general; -} __packed; - -struct iwl_bt_notif_statistics { - __le32 flag; - struct statistics_rx_bt rx; - struct statistics_tx tx; - struct statistics_general_bt general; -} __packed; - -/* - * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command) - * - * uCode send MISSED_BEACONS_NOTIFICATION to driver when detect beacon missed - * in regardless of how many missed beacons, which mean when driver receive the - * notification, inside the command, it can find all the beacons information - * which include number of total missed beacons, number of consecutive missed - * beacons, number of beacons received and number of beacons expected to - * receive. - * - * If uCode detected consecutive_missed_beacons > 5, it will reset the radio - * in order to bring the radio/PHY back to working state; which has no relation - * to when driver will perform sensitivity calibration. - * - * Driver should set it own missed_beacon_threshold to decide when to perform - * sensitivity calibration based on number of consecutive missed beacons in - * order to improve overall performance, especially in noisy environment. - * - */ - -#define IWL_MISSED_BEACON_THRESHOLD_MIN (1) -#define IWL_MISSED_BEACON_THRESHOLD_DEF (5) -#define IWL_MISSED_BEACON_THRESHOLD_MAX IWL_MISSED_BEACON_THRESHOLD_DEF - -struct iwl_missed_beacon_notif { - __le32 consecutive_missed_beacons; - __le32 total_missed_becons; - __le32 num_expected_beacons; - __le32 num_recvd_beacons; -} __packed; - - -/****************************************************************************** - * (11) - * Rx Calibration Commands: - * - * With the uCode used for open source drivers, most Tx calibration (except - * for Tx Power) and most Rx calibration is done by uCode during the - * "initialize" phase of uCode boot. Driver must calibrate only: - * - * 1) Tx power (depends on temperature), described elsewhere - * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas) - * 3) Receiver sensitivity (to optimize signal detection) - * - *****************************************************************************/ - -/** - * SENSITIVITY_CMD = 0xa8 (command, has simple generic response) - * - * This command sets up the Rx signal detector for a sensitivity level that - * is high enough to lock onto all signals within the associated network, - * but low enough to ignore signals that are below a certain threshold, so as - * not to have too many "false alarms". False alarms are signals that the - * Rx DSP tries to lock onto, but then discards after determining that they - * are noise. - * - * The optimum number of false alarms is between 5 and 50 per 200 TUs - * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e. - * time listening, not transmitting). Driver must adjust sensitivity so that - * the ratio of actual false alarms to actual Rx time falls within this range. - * - * While associated, uCode delivers STATISTICS_NOTIFICATIONs after each - * received beacon. These provide information to the driver to analyze the - * sensitivity. Don't analyze statistics that come in from scanning, or any - * other non-associated-network source. Pertinent statistics include: - * - * From "general" statistics (struct statistics_rx_non_phy): - * - * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level) - * Measure of energy of desired signal. Used for establishing a level - * below which the device does not detect signals. - * - * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB) - * Measure of background noise in silent period after beacon. - * - * channel_load - * uSecs of actual Rx time during beacon period (varies according to - * how much time was spent transmitting). - * - * From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately: - * - * false_alarm_cnt - * Signal locks abandoned early (before phy-level header). - * - * plcp_err - * Signal locks abandoned late (during phy-level header). - * - * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from - * beacon to beacon, i.e. each value is an accumulation of all errors - * before and including the latest beacon. Values will wrap around to 0 - * after counting up to 2^32 - 1. Driver must differentiate vs. - * previous beacon's values to determine # false alarms in the current - * beacon period. - * - * Total number of false alarms = false_alarms + plcp_errs - * - * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd - * (notice that the start points for OFDM are at or close to settings for - * maximum sensitivity): - * - * START / MIN / MAX - * HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX 90 / 85 / 120 - * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX 170 / 170 / 210 - * HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX 105 / 105 / 140 - * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX 220 / 220 / 270 - * - * If actual rate of OFDM false alarms (+ plcp_errors) is too high - * (greater than 50 for each 204.8 msecs listening), reduce sensitivity - * by *adding* 1 to all 4 of the table entries above, up to the max for - * each entry. Conversely, if false alarm rate is too low (less than 5 - * for each 204.8 msecs listening), *subtract* 1 from each entry to - * increase sensitivity. - * - * For CCK sensitivity, keep track of the following: - * - * 1). 20-beacon history of maximum background noise, indicated by - * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the - * 3 receivers. For any given beacon, the "silence reference" is - * the maximum of last 60 samples (20 beacons * 3 receivers). - * - * 2). 10-beacon history of strongest signal level, as indicated - * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers, - * i.e. the strength of the signal through the best receiver at the - * moment. These measurements are "upside down", with lower values - * for stronger signals, so max energy will be *minimum* value. - * - * Then for any given beacon, the driver must determine the *weakest* - * of the strongest signals; this is the minimum level that needs to be - * successfully detected, when using the best receiver at the moment. - * "Max cck energy" is the maximum (higher value means lower energy!) - * of the last 10 minima. Once this is determined, driver must add - * a little margin by adding "6" to it. - * - * 3). Number of consecutive beacon periods with too few false alarms. - * Reset this to 0 at the first beacon period that falls within the - * "good" range (5 to 50 false alarms per 204.8 milliseconds rx). - * - * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd - * (notice that the start points for CCK are at maximum sensitivity): - * - * START / MIN / MAX - * HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX 125 / 125 / 200 - * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX 200 / 200 / 400 - * HD_MIN_ENERGY_CCK_DET_INDEX 100 / 0 / 100 - * - * If actual rate of CCK false alarms (+ plcp_errors) is too high - * (greater than 50 for each 204.8 msecs listening), method for reducing - * sensitivity is: - * - * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, - * up to max 400. - * - * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160, - * sensitivity has been reduced a significant amount; bring it up to - * a moderate 161. Otherwise, *add* 3, up to max 200. - * - * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160, - * sensitivity has been reduced only a moderate or small amount; - * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX, - * down to min 0. Otherwise (if gain has been significantly reduced), - * don't change the HD_MIN_ENERGY_CCK_DET_INDEX value. - * - * b) Save a snapshot of the "silence reference". - * - * If actual rate of CCK false alarms (+ plcp_errors) is too low - * (less than 5 for each 204.8 msecs listening), method for increasing - * sensitivity is used only if: - * - * 1a) Previous beacon did not have too many false alarms - * 1b) AND difference between previous "silence reference" and current - * "silence reference" (prev - current) is 2 or more, - * OR 2) 100 or more consecutive beacon periods have had rate of - * less than 5 false alarms per 204.8 milliseconds rx time. - * - * Method for increasing sensitivity: - * - * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX, - * down to min 125. - * - * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX, - * down to min 200. - * - * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100. - * - * If actual rate of CCK false alarms (+ plcp_errors) is within good range - * (between 5 and 50 for each 204.8 msecs listening): - * - * 1) Save a snapshot of the silence reference. - * - * 2) If previous beacon had too many CCK false alarms (+ plcp_errors), - * give some extra margin to energy threshold by *subtracting* 8 - * from value in HD_MIN_ENERGY_CCK_DET_INDEX. - * - * For all cases (too few, too many, good range), make sure that the CCK - * detection threshold (energy) is below the energy level for robust - * detection over the past 10 beacon periods, the "Max cck energy". - * Lower values mean higher energy; this means making sure that the value - * in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy". - * - */ - -/* - * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd) - */ -#define HD_TABLE_SIZE (11) /* number of entries */ -#define HD_MIN_ENERGY_CCK_DET_INDEX (0) /* table indexes */ -#define HD_MIN_ENERGY_OFDM_DET_INDEX (1) -#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX (2) -#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX (3) -#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX (4) -#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX (5) -#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX (6) -#define HD_BARKER_CORR_TH_ADD_MIN_INDEX (7) -#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX (8) -#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9) -#define HD_OFDM_ENERGY_TH_IN_INDEX (10) - -/* - * Additional table entries in enhance SENSITIVITY_CMD - */ -#define HD_INA_NON_SQUARE_DET_OFDM_INDEX (11) -#define HD_INA_NON_SQUARE_DET_CCK_INDEX (12) -#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX (13) -#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX (14) -#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (15) -#define HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX (16) -#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX (17) -#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX (18) -#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (19) -#define HD_CCK_NON_SQUARE_DET_SLOPE_INDEX (20) -#define HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX (21) -#define HD_RESERVED (22) - -/* number of entries for enhanced tbl */ -#define ENHANCE_HD_TABLE_SIZE (23) - -/* number of additional entries for enhanced tbl */ -#define ENHANCE_HD_TABLE_ENTRIES (ENHANCE_HD_TABLE_SIZE - HD_TABLE_SIZE) - -#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V1 cpu_to_le16(0) -#define HD_INA_NON_SQUARE_DET_CCK_DATA_V1 cpu_to_le16(0) -#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1 cpu_to_le16(0) -#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1 cpu_to_le16(668) -#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1 cpu_to_le16(4) -#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1 cpu_to_le16(486) -#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1 cpu_to_le16(37) -#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1 cpu_to_le16(853) -#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1 cpu_to_le16(4) -#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1 cpu_to_le16(476) -#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1 cpu_to_le16(99) - -#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V2 cpu_to_le16(1) -#define HD_INA_NON_SQUARE_DET_CCK_DATA_V2 cpu_to_le16(1) -#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2 cpu_to_le16(1) -#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2 cpu_to_le16(600) -#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2 cpu_to_le16(40) -#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2 cpu_to_le16(486) -#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2 cpu_to_le16(45) -#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2 cpu_to_le16(853) -#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2 cpu_to_le16(60) -#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2 cpu_to_le16(476) -#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2 cpu_to_le16(99) - - -/* Control field in struct iwl_sensitivity_cmd */ -#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0) -#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1) - -/** - * struct iwl_sensitivity_cmd - * @control: (1) updates working table, (0) updates default table - * @table: energy threshold values, use HD_* as index into table - * - * Always use "1" in "control" to update uCode's working table and DSP. - */ -struct iwl_sensitivity_cmd { - __le16 control; /* always use "1" */ - __le16 table[HD_TABLE_SIZE]; /* use HD_* as index */ -} __packed; - -/* - * - */ -struct iwl_enhance_sensitivity_cmd { - __le16 control; /* always use "1" */ - __le16 enhance_table[ENHANCE_HD_TABLE_SIZE]; /* use HD_* as index */ -} __packed; - - -/** - * REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response) - * - * This command sets the relative gains of agn device's 3 radio receiver chains. - * - * After the first association, driver should accumulate signal and noise - * statistics from the STATISTICS_NOTIFICATIONs that follow the first 20 - * beacons from the associated network (don't collect statistics that come - * in from scanning, or any other non-network source). - * - * DISCONNECTED ANTENNA: - * - * Driver should determine which antennas are actually connected, by comparing - * average beacon signal levels for the 3 Rx chains. Accumulate (add) the - * following values over 20 beacons, one accumulator for each of the chains - * a/b/c, from struct statistics_rx_non_phy: - * - * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB) - * - * Find the strongest signal from among a/b/c. Compare the other two to the - * strongest. If any signal is more than 15 dB (times 20, unless you - * divide the accumulated values by 20) below the strongest, the driver - * considers that antenna to be disconnected, and should not try to use that - * antenna/chain for Rx or Tx. If both A and B seem to be disconnected, - * driver should declare the stronger one as connected, and attempt to use it - * (A and B are the only 2 Tx chains!). - * - * - * RX BALANCE: - * - * Driver should balance the 3 receivers (but just the ones that are connected - * to antennas, see above) for gain, by comparing the average signal levels - * detected during the silence after each beacon (background noise). - * Accumulate (add) the following values over 20 beacons, one accumulator for - * each of the chains a/b/c, from struct statistics_rx_non_phy: - * - * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB) - * - * Find the weakest background noise level from among a/b/c. This Rx chain - * will be the reference, with 0 gain adjustment. Attenuate other channels by - * finding noise difference: - * - * (accum_noise[i] - accum_noise[reference]) / 30 - * - * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB. - * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the - * driver should limit the difference results to a range of 0-3 (0-4.5 dB), - * and set bit 2 to indicate "reduce gain". The value for the reference - * (weakest) chain should be "0". - * - * diff_gain_[abc] bit fields: - * 2: (1) reduce gain, (0) increase gain - * 1-0: amount of gain, units of 1.5 dB - */ - -/* Phy calibration command for series */ -enum { - IWL_PHY_CALIBRATE_DC_CMD = 8, - IWL_PHY_CALIBRATE_LO_CMD = 9, - IWL_PHY_CALIBRATE_TX_IQ_CMD = 11, - IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD = 15, - IWL_PHY_CALIBRATE_BASE_BAND_CMD = 16, - IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD = 17, - IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD = 18, -}; - -/* This enum defines the bitmap of various calibrations to enable in both - * init ucode and runtime ucode through CALIBRATION_CFG_CMD. - */ -enum iwl_ucode_calib_cfg { - IWL_CALIB_CFG_RX_BB_IDX = BIT(0), - IWL_CALIB_CFG_DC_IDX = BIT(1), - IWL_CALIB_CFG_LO_IDX = BIT(2), - IWL_CALIB_CFG_TX_IQ_IDX = BIT(3), - IWL_CALIB_CFG_RX_IQ_IDX = BIT(4), - IWL_CALIB_CFG_NOISE_IDX = BIT(5), - IWL_CALIB_CFG_CRYSTAL_IDX = BIT(6), - IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(7), - IWL_CALIB_CFG_PAPD_IDX = BIT(8), - IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(9), - IWL_CALIB_CFG_TX_PWR_IDX = BIT(10), -}; - -#define IWL_CALIB_INIT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \ - IWL_CALIB_CFG_DC_IDX | \ - IWL_CALIB_CFG_LO_IDX | \ - IWL_CALIB_CFG_TX_IQ_IDX | \ - IWL_CALIB_CFG_RX_IQ_IDX | \ - IWL_CALIB_CFG_CRYSTAL_IDX) - -#define IWL_CALIB_RT_CFG_ALL cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX | \ - IWL_CALIB_CFG_DC_IDX | \ - IWL_CALIB_CFG_LO_IDX | \ - IWL_CALIB_CFG_TX_IQ_IDX | \ - IWL_CALIB_CFG_RX_IQ_IDX | \ - IWL_CALIB_CFG_TEMPERATURE_IDX | \ - IWL_CALIB_CFG_PAPD_IDX | \ - IWL_CALIB_CFG_TX_PWR_IDX | \ - IWL_CALIB_CFG_CRYSTAL_IDX) - -#define IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK cpu_to_le32(BIT(0)) - -struct iwl_calib_cfg_elmnt_s { - __le32 is_enable; - __le32 start; - __le32 send_res; - __le32 apply_res; - __le32 reserved; -} __packed; - -struct iwl_calib_cfg_status_s { - struct iwl_calib_cfg_elmnt_s once; - struct iwl_calib_cfg_elmnt_s perd; - __le32 flags; -} __packed; - -struct iwl_calib_cfg_cmd { - struct iwl_calib_cfg_status_s ucd_calib_cfg; - struct iwl_calib_cfg_status_s drv_calib_cfg; - __le32 reserved1; -} __packed; - -struct iwl_calib_hdr { - u8 op_code; - u8 first_group; - u8 groups_num; - u8 data_valid; -} __packed; - -struct iwl_calib_cmd { - struct iwl_calib_hdr hdr; - u8 data[0]; -} __packed; - -struct iwl_calib_xtal_freq_cmd { - struct iwl_calib_hdr hdr; - u8 cap_pin1; - u8 cap_pin2; - u8 pad[2]; -} __packed; - -#define DEFAULT_RADIO_SENSOR_OFFSET cpu_to_le16(2700) -struct iwl_calib_temperature_offset_cmd { - struct iwl_calib_hdr hdr; - __le16 radio_sensor_offset; - __le16 reserved; -} __packed; - -struct iwl_calib_temperature_offset_v2_cmd { - struct iwl_calib_hdr hdr; - __le16 radio_sensor_offset_high; - __le16 radio_sensor_offset_low; - __le16 burntVoltageRef; - __le16 reserved; -} __packed; - -/* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */ -struct iwl_calib_chain_noise_reset_cmd { - struct iwl_calib_hdr hdr; - u8 data[0]; -}; - -/* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */ -struct iwl_calib_chain_noise_gain_cmd { - struct iwl_calib_hdr hdr; - u8 delta_gain_1; - u8 delta_gain_2; - u8 pad[2]; -} __packed; - -/****************************************************************************** - * (12) - * Miscellaneous Commands: - * - *****************************************************************************/ - -/* - * LEDs Command & Response - * REPLY_LEDS_CMD = 0x48 (command, has simple generic response) - * - * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field), - * this command turns it on or off, or sets up a periodic blinking cycle. - */ -struct iwl_led_cmd { - __le32 interval; /* "interval" in uSec */ - u8 id; /* 1: Activity, 2: Link, 3: Tech */ - u8 off; /* # intervals off while blinking; - * "0", with >0 "on" value, turns LED on */ - u8 on; /* # intervals on while blinking; - * "0", regardless of "off", turns LED off */ - u8 reserved; -} __packed; - -/* - * station priority table entries - * also used as potential "events" value for both - * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD - */ - -/* - * COEX events entry flag masks - * RP - Requested Priority - * WP - Win Medium Priority: priority assigned when the contention has been won - */ -#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG (0x1) -#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG (0x2) -#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG (0x4) - -#define COEX_CU_UNASSOC_IDLE_RP 4 -#define COEX_CU_UNASSOC_MANUAL_SCAN_RP 4 -#define COEX_CU_UNASSOC_AUTO_SCAN_RP 4 -#define COEX_CU_CALIBRATION_RP 4 -#define COEX_CU_PERIODIC_CALIBRATION_RP 4 -#define COEX_CU_CONNECTION_ESTAB_RP 4 -#define COEX_CU_ASSOCIATED_IDLE_RP 4 -#define COEX_CU_ASSOC_MANUAL_SCAN_RP 4 -#define COEX_CU_ASSOC_AUTO_SCAN_RP 4 -#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP 4 -#define COEX_CU_RF_ON_RP 6 -#define COEX_CU_RF_OFF_RP 4 -#define COEX_CU_STAND_ALONE_DEBUG_RP 6 -#define COEX_CU_IPAN_ASSOC_LEVEL_RP 4 -#define COEX_CU_RSRVD1_RP 4 -#define COEX_CU_RSRVD2_RP 4 - -#define COEX_CU_UNASSOC_IDLE_WP 3 -#define COEX_CU_UNASSOC_MANUAL_SCAN_WP 3 -#define COEX_CU_UNASSOC_AUTO_SCAN_WP 3 -#define COEX_CU_CALIBRATION_WP 3 -#define COEX_CU_PERIODIC_CALIBRATION_WP 3 -#define COEX_CU_CONNECTION_ESTAB_WP 3 -#define COEX_CU_ASSOCIATED_IDLE_WP 3 -#define COEX_CU_ASSOC_MANUAL_SCAN_WP 3 -#define COEX_CU_ASSOC_AUTO_SCAN_WP 3 -#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP 3 -#define COEX_CU_RF_ON_WP 3 -#define COEX_CU_RF_OFF_WP 3 -#define COEX_CU_STAND_ALONE_DEBUG_WP 6 -#define COEX_CU_IPAN_ASSOC_LEVEL_WP 3 -#define COEX_CU_RSRVD1_WP 3 -#define COEX_CU_RSRVD2_WP 3 - -#define COEX_UNASSOC_IDLE_FLAGS 0 -#define COEX_UNASSOC_MANUAL_SCAN_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) -#define COEX_UNASSOC_AUTO_SCAN_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) -#define COEX_CALIBRATION_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) -#define COEX_PERIODIC_CALIBRATION_FLAGS 0 -/* - * COEX_CONNECTION_ESTAB: - * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. - */ -#define COEX_CONNECTION_ESTAB_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ - COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) -#define COEX_ASSOCIATED_IDLE_FLAGS 0 -#define COEX_ASSOC_MANUAL_SCAN_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) -#define COEX_ASSOC_AUTO_SCAN_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) -#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS 0 -#define COEX_RF_ON_FLAGS 0 -#define COEX_RF_OFF_FLAGS 0 -#define COEX_STAND_ALONE_DEBUG_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG) -#define COEX_IPAN_ASSOC_LEVEL_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ - COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) -#define COEX_RSRVD1_FLAGS 0 -#define COEX_RSRVD2_FLAGS 0 -/* - * COEX_CU_RF_ON is the event wrapping all radio ownership. - * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network. - */ -#define COEX_CU_RF_ON_FLAGS \ - (COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG | \ - COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG | \ - COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG) - - -enum { - /* un-association part */ - COEX_UNASSOC_IDLE = 0, - COEX_UNASSOC_MANUAL_SCAN = 1, - COEX_UNASSOC_AUTO_SCAN = 2, - /* calibration */ - COEX_CALIBRATION = 3, - COEX_PERIODIC_CALIBRATION = 4, - /* connection */ - COEX_CONNECTION_ESTAB = 5, - /* association part */ - COEX_ASSOCIATED_IDLE = 6, - COEX_ASSOC_MANUAL_SCAN = 7, - COEX_ASSOC_AUTO_SCAN = 8, - COEX_ASSOC_ACTIVE_LEVEL = 9, - /* RF ON/OFF */ - COEX_RF_ON = 10, - COEX_RF_OFF = 11, - COEX_STAND_ALONE_DEBUG = 12, - /* IPAN */ - COEX_IPAN_ASSOC_LEVEL = 13, - /* reserved */ - COEX_RSRVD1 = 14, - COEX_RSRVD2 = 15, - COEX_NUM_OF_EVENTS = 16 -}; - -/* - * Coexistence WIFI/WIMAX Command - * COEX_PRIORITY_TABLE_CMD = 0x5a - * - */ -struct iwl_wimax_coex_event_entry { - u8 request_prio; - u8 win_medium_prio; - u8 reserved; - u8 flags; -} __packed; - -/* COEX flag masks */ - -/* Station table is valid */ -#define COEX_FLAGS_STA_TABLE_VALID_MSK (0x1) -/* UnMask wake up src at unassociated sleep */ -#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK (0x4) -/* UnMask wake up src at associated sleep */ -#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK (0x8) -/* Enable CoEx feature. */ -#define COEX_FLAGS_COEX_ENABLE_MSK (0x80) - -struct iwl_wimax_coex_cmd { - u8 flags; - u8 reserved[3]; - struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS]; -} __packed; - -/* - * Coexistence MEDIUM NOTIFICATION - * COEX_MEDIUM_NOTIFICATION = 0x5b - * - * notification from uCode to host to indicate medium changes - * - */ -/* - * status field - * bit 0 - 2: medium status - * bit 3: medium change indication - * bit 4 - 31: reserved - */ -/* status option values, (0 - 2 bits) */ -#define COEX_MEDIUM_BUSY (0x0) /* radio belongs to WiMAX */ -#define COEX_MEDIUM_ACTIVE (0x1) /* radio belongs to WiFi */ -#define COEX_MEDIUM_PRE_RELEASE (0x2) /* received radio release */ -#define COEX_MEDIUM_MSK (0x7) - -/* send notification status (1 bit) */ -#define COEX_MEDIUM_CHANGED (0x8) -#define COEX_MEDIUM_CHANGED_MSK (0x8) -#define COEX_MEDIUM_SHIFT (3) - -struct iwl_coex_medium_notification { - __le32 status; - __le32 events; -} __packed; - -/* - * Coexistence EVENT Command - * COEX_EVENT_CMD = 0x5c - * - * send from host to uCode for coex event request. - */ -/* flags options */ -#define COEX_EVENT_REQUEST_MSK (0x1) - -struct iwl_coex_event_cmd { - u8 flags; - u8 event; - __le16 reserved; -} __packed; - -struct iwl_coex_event_resp { - __le32 status; -} __packed; - - -/****************************************************************************** - * Bluetooth Coexistence commands - * - *****************************************************************************/ - -/* - * BT Status notification - * REPLY_BT_COEX_PROFILE_NOTIF = 0xce - */ -enum iwl_bt_coex_profile_traffic_load { - IWL_BT_COEX_TRAFFIC_LOAD_NONE = 0, - IWL_BT_COEX_TRAFFIC_LOAD_LOW = 1, - IWL_BT_COEX_TRAFFIC_LOAD_HIGH = 2, - IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS = 3, -/* - * There are no more even though below is a u8, the - * indication from the BT device only has two bits. - */ -}; - -#define BT_SESSION_ACTIVITY_1_UART_MSG 0x1 -#define BT_SESSION_ACTIVITY_2_UART_MSG 0x2 - -/* BT UART message - Share Part (BT -> WiFi) */ -#define BT_UART_MSG_FRAME1MSGTYPE_POS (0) -#define BT_UART_MSG_FRAME1MSGTYPE_MSK \ - (0x7 << BT_UART_MSG_FRAME1MSGTYPE_POS) -#define BT_UART_MSG_FRAME1SSN_POS (3) -#define BT_UART_MSG_FRAME1SSN_MSK \ - (0x3 << BT_UART_MSG_FRAME1SSN_POS) -#define BT_UART_MSG_FRAME1UPDATEREQ_POS (5) -#define BT_UART_MSG_FRAME1UPDATEREQ_MSK \ - (0x1 << BT_UART_MSG_FRAME1UPDATEREQ_POS) -#define BT_UART_MSG_FRAME1RESERVED_POS (6) -#define BT_UART_MSG_FRAME1RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME1RESERVED_POS) - -#define BT_UART_MSG_FRAME2OPENCONNECTIONS_POS (0) -#define BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK \ - (0x3 << BT_UART_MSG_FRAME2OPENCONNECTIONS_POS) -#define BT_UART_MSG_FRAME2TRAFFICLOAD_POS (2) -#define BT_UART_MSG_FRAME2TRAFFICLOAD_MSK \ - (0x3 << BT_UART_MSG_FRAME2TRAFFICLOAD_POS) -#define BT_UART_MSG_FRAME2CHLSEQN_POS (4) -#define BT_UART_MSG_FRAME2CHLSEQN_MSK \ - (0x1 << BT_UART_MSG_FRAME2CHLSEQN_POS) -#define BT_UART_MSG_FRAME2INBAND_POS (5) -#define BT_UART_MSG_FRAME2INBAND_MSK \ - (0x1 << BT_UART_MSG_FRAME2INBAND_POS) -#define BT_UART_MSG_FRAME2RESERVED_POS (6) -#define BT_UART_MSG_FRAME2RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME2RESERVED_POS) - -#define BT_UART_MSG_FRAME3SCOESCO_POS (0) -#define BT_UART_MSG_FRAME3SCOESCO_MSK \ - (0x1 << BT_UART_MSG_FRAME3SCOESCO_POS) -#define BT_UART_MSG_FRAME3SNIFF_POS (1) -#define BT_UART_MSG_FRAME3SNIFF_MSK \ - (0x1 << BT_UART_MSG_FRAME3SNIFF_POS) -#define BT_UART_MSG_FRAME3A2DP_POS (2) -#define BT_UART_MSG_FRAME3A2DP_MSK \ - (0x1 << BT_UART_MSG_FRAME3A2DP_POS) -#define BT_UART_MSG_FRAME3ACL_POS (3) -#define BT_UART_MSG_FRAME3ACL_MSK \ - (0x1 << BT_UART_MSG_FRAME3ACL_POS) -#define BT_UART_MSG_FRAME3MASTER_POS (4) -#define BT_UART_MSG_FRAME3MASTER_MSK \ - (0x1 << BT_UART_MSG_FRAME3MASTER_POS) -#define BT_UART_MSG_FRAME3OBEX_POS (5) -#define BT_UART_MSG_FRAME3OBEX_MSK \ - (0x1 << BT_UART_MSG_FRAME3OBEX_POS) -#define BT_UART_MSG_FRAME3RESERVED_POS (6) -#define BT_UART_MSG_FRAME3RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME3RESERVED_POS) - -#define BT_UART_MSG_FRAME4IDLEDURATION_POS (0) -#define BT_UART_MSG_FRAME4IDLEDURATION_MSK \ - (0x3F << BT_UART_MSG_FRAME4IDLEDURATION_POS) -#define BT_UART_MSG_FRAME4RESERVED_POS (6) -#define BT_UART_MSG_FRAME4RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME4RESERVED_POS) - -#define BT_UART_MSG_FRAME5TXACTIVITY_POS (0) -#define BT_UART_MSG_FRAME5TXACTIVITY_MSK \ - (0x3 << BT_UART_MSG_FRAME5TXACTIVITY_POS) -#define BT_UART_MSG_FRAME5RXACTIVITY_POS (2) -#define BT_UART_MSG_FRAME5RXACTIVITY_MSK \ - (0x3 << BT_UART_MSG_FRAME5RXACTIVITY_POS) -#define BT_UART_MSG_FRAME5ESCORETRANSMIT_POS (4) -#define BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK \ - (0x3 << BT_UART_MSG_FRAME5ESCORETRANSMIT_POS) -#define BT_UART_MSG_FRAME5RESERVED_POS (6) -#define BT_UART_MSG_FRAME5RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME5RESERVED_POS) - -#define BT_UART_MSG_FRAME6SNIFFINTERVAL_POS (0) -#define BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK \ - (0x1F << BT_UART_MSG_FRAME6SNIFFINTERVAL_POS) -#define BT_UART_MSG_FRAME6DISCOVERABLE_POS (5) -#define BT_UART_MSG_FRAME6DISCOVERABLE_MSK \ - (0x1 << BT_UART_MSG_FRAME6DISCOVERABLE_POS) -#define BT_UART_MSG_FRAME6RESERVED_POS (6) -#define BT_UART_MSG_FRAME6RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME6RESERVED_POS) - -#define BT_UART_MSG_FRAME7SNIFFACTIVITY_POS (0) -#define BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK \ - (0x7 << BT_UART_MSG_FRAME7SNIFFACTIVITY_POS) -#define BT_UART_MSG_FRAME7PAGE_POS (3) -#define BT_UART_MSG_FRAME7PAGE_MSK \ - (0x1 << BT_UART_MSG_FRAME7PAGE_POS) -#define BT_UART_MSG_FRAME7INQUIRY_POS (4) -#define BT_UART_MSG_FRAME7INQUIRY_MSK \ - (0x1 << BT_UART_MSG_FRAME7INQUIRY_POS) -#define BT_UART_MSG_FRAME7CONNECTABLE_POS (5) -#define BT_UART_MSG_FRAME7CONNECTABLE_MSK \ - (0x1 << BT_UART_MSG_FRAME7CONNECTABLE_POS) -#define BT_UART_MSG_FRAME7RESERVED_POS (6) -#define BT_UART_MSG_FRAME7RESERVED_MSK \ - (0x3 << BT_UART_MSG_FRAME7RESERVED_POS) - -/* BT Session Activity 2 UART message (BT -> WiFi) */ -#define BT_UART_MSG_2_FRAME1RESERVED1_POS (5) -#define BT_UART_MSG_2_FRAME1RESERVED1_MSK \ - (0x1<<BT_UART_MSG_2_FRAME1RESERVED1_POS) -#define BT_UART_MSG_2_FRAME1RESERVED2_POS (6) -#define BT_UART_MSG_2_FRAME1RESERVED2_MSK \ - (0x3<<BT_UART_MSG_2_FRAME1RESERVED2_POS) - -#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS (0) -#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_MSK \ - (0x3F<<BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS) -#define BT_UART_MSG_2_FRAME2RESERVED_POS (6) -#define BT_UART_MSG_2_FRAME2RESERVED_MSK \ - (0x3<<BT_UART_MSG_2_FRAME2RESERVED_POS) - -#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS (0) -#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_MSK \ - (0xF<<BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS) -#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS (4) -#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_MSK \ - (0x1<<BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS) -#define BT_UART_MSG_2_FRAME3LEMASTER_POS (5) -#define BT_UART_MSG_2_FRAME3LEMASTER_MSK \ - (0x1<<BT_UART_MSG_2_FRAME3LEMASTER_POS) -#define BT_UART_MSG_2_FRAME3RESERVED_POS (6) -#define BT_UART_MSG_2_FRAME3RESERVED_MSK \ - (0x3<<BT_UART_MSG_2_FRAME3RESERVED_POS) - -#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS (0) -#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_MSK \ - (0xF<<BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS) -#define BT_UART_MSG_2_FRAME4NUMLECONN_POS (4) -#define BT_UART_MSG_2_FRAME4NUMLECONN_MSK \ - (0x3<<BT_UART_MSG_2_FRAME4NUMLECONN_POS) -#define BT_UART_MSG_2_FRAME4RESERVED_POS (6) -#define BT_UART_MSG_2_FRAME4RESERVED_MSK \ - (0x3<<BT_UART_MSG_2_FRAME4RESERVED_POS) - -#define BT_UART_MSG_2_FRAME5BTMINRSSI_POS (0) -#define BT_UART_MSG_2_FRAME5BTMINRSSI_MSK \ - (0xF<<BT_UART_MSG_2_FRAME5BTMINRSSI_POS) -#define BT_UART_MSG_2_FRAME5LESCANINITMODE_POS (4) -#define BT_UART_MSG_2_FRAME5LESCANINITMODE_MSK \ - (0x1<<BT_UART_MSG_2_FRAME5LESCANINITMODE_POS) -#define BT_UART_MSG_2_FRAME5LEADVERMODE_POS (5) -#define BT_UART_MSG_2_FRAME5LEADVERMODE_MSK \ - (0x1<<BT_UART_MSG_2_FRAME5LEADVERMODE_POS) -#define BT_UART_MSG_2_FRAME5RESERVED_POS (6) -#define BT_UART_MSG_2_FRAME5RESERVED_MSK \ - (0x3<<BT_UART_MSG_2_FRAME5RESERVED_POS) - -#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS (0) -#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_MSK \ - (0x1F<<BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS) -#define BT_UART_MSG_2_FRAME6RFU_POS (5) -#define BT_UART_MSG_2_FRAME6RFU_MSK \ - (0x1<<BT_UART_MSG_2_FRAME6RFU_POS) -#define BT_UART_MSG_2_FRAME6RESERVED_POS (6) -#define BT_UART_MSG_2_FRAME6RESERVED_MSK \ - (0x3<<BT_UART_MSG_2_FRAME6RESERVED_POS) - -#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS (0) -#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_MSK \ - (0x7<<BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS) -#define BT_UART_MSG_2_FRAME7LEPROFILE1_POS (3) -#define BT_UART_MSG_2_FRAME7LEPROFILE1_MSK \ - (0x1<<BT_UART_MSG_2_FRAME7LEPROFILE1_POS) -#define BT_UART_MSG_2_FRAME7LEPROFILE2_POS (4) -#define BT_UART_MSG_2_FRAME7LEPROFILE2_MSK \ - (0x1<<BT_UART_MSG_2_FRAME7LEPROFILE2_POS) -#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS (5) -#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_MSK \ - (0x1<<BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS) -#define BT_UART_MSG_2_FRAME7RESERVED_POS (6) -#define BT_UART_MSG_2_FRAME7RESERVED_MSK \ - (0x3<<BT_UART_MSG_2_FRAME7RESERVED_POS) - - -struct iwl_bt_uart_msg { - u8 header; - u8 frame1; - u8 frame2; - u8 frame3; - u8 frame4; - u8 frame5; - u8 frame6; - u8 frame7; -} __attribute__((packed)); - -struct iwl_bt_coex_profile_notif { - struct iwl_bt_uart_msg last_bt_uart_msg; - u8 bt_status; /* 0 - off, 1 - on */ - u8 bt_traffic_load; /* 0 .. 3? */ - u8 bt_ci_compliance; /* 0 - not complied, 1 - complied */ - u8 reserved; -} __attribute__((packed)); - -#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS 0 -#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_MSK 0x1 -#define IWL_BT_COEX_PRIO_TBL_PRIO_POS 1 -#define IWL_BT_COEX_PRIO_TBL_PRIO_MASK 0x0e -#define IWL_BT_COEX_PRIO_TBL_RESERVED_POS 4 -#define IWL_BT_COEX_PRIO_TBL_RESERVED_MASK 0xf0 -#define IWL_BT_COEX_PRIO_TBL_PRIO_SHIFT 1 - -/* - * BT Coexistence Priority table - * REPLY_BT_COEX_PRIO_TABLE = 0xcc - */ -enum bt_coex_prio_table_events { - BT_COEX_PRIO_TBL_EVT_INIT_CALIB1 = 0, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2 = 1, - BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1 = 2, - BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2 = 3, /* DC calib */ - BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1 = 4, - BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2 = 5, - BT_COEX_PRIO_TBL_EVT_DTIM = 6, - BT_COEX_PRIO_TBL_EVT_SCAN52 = 7, - BT_COEX_PRIO_TBL_EVT_SCAN24 = 8, - BT_COEX_PRIO_TBL_EVT_RESERVED0 = 9, - BT_COEX_PRIO_TBL_EVT_RESERVED1 = 10, - BT_COEX_PRIO_TBL_EVT_RESERVED2 = 11, - BT_COEX_PRIO_TBL_EVT_RESERVED3 = 12, - BT_COEX_PRIO_TBL_EVT_RESERVED4 = 13, - BT_COEX_PRIO_TBL_EVT_RESERVED5 = 14, - BT_COEX_PRIO_TBL_EVT_RESERVED6 = 15, - /* BT_COEX_PRIO_TBL_EVT_MAX should always be last */ - BT_COEX_PRIO_TBL_EVT_MAX, -}; - -enum bt_coex_prio_table_priorities { - BT_COEX_PRIO_TBL_DISABLED = 0, - BT_COEX_PRIO_TBL_PRIO_LOW = 1, - BT_COEX_PRIO_TBL_PRIO_HIGH = 2, - BT_COEX_PRIO_TBL_PRIO_BYPASS = 3, - BT_COEX_PRIO_TBL_PRIO_COEX_OFF = 4, - BT_COEX_PRIO_TBL_PRIO_COEX_ON = 5, - BT_COEX_PRIO_TBL_PRIO_RSRVD1 = 6, - BT_COEX_PRIO_TBL_PRIO_RSRVD2 = 7, - BT_COEX_PRIO_TBL_MAX, -}; - -struct iwl_bt_coex_prio_table_cmd { - u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX]; -} __attribute__((packed)); - -#define IWL_BT_COEX_ENV_CLOSE 0 -#define IWL_BT_COEX_ENV_OPEN 1 -/* - * BT Protection Envelope - * REPLY_BT_COEX_PROT_ENV = 0xcd - */ -struct iwl_bt_coex_prot_env_cmd { - u8 action; /* 0 = closed, 1 = open */ - u8 type; /* 0 .. 15 */ - u8 reserved[2]; -} __attribute__((packed)); - -/* - * REPLY_D3_CONFIG - */ -enum iwlagn_d3_wakeup_filters { - IWLAGN_D3_WAKEUP_RFKILL = BIT(0), - IWLAGN_D3_WAKEUP_SYSASSERT = BIT(1), -}; - -struct iwlagn_d3_config_cmd { - __le32 min_sleep_time; - __le32 wakeup_flags; -} __packed; - -/* - * REPLY_WOWLAN_PATTERNS - */ -#define IWLAGN_WOWLAN_MIN_PATTERN_LEN 16 -#define IWLAGN_WOWLAN_MAX_PATTERN_LEN 128 - -struct iwlagn_wowlan_pattern { - u8 mask[IWLAGN_WOWLAN_MAX_PATTERN_LEN / 8]; - u8 pattern[IWLAGN_WOWLAN_MAX_PATTERN_LEN]; - u8 mask_size; - u8 pattern_size; - __le16 reserved; -} __packed; - -#define IWLAGN_WOWLAN_MAX_PATTERNS 20 - -struct iwlagn_wowlan_patterns_cmd { - __le32 n_patterns; - struct iwlagn_wowlan_pattern patterns[]; -} __packed; - -/* - * REPLY_WOWLAN_WAKEUP_FILTER - */ -enum iwlagn_wowlan_wakeup_filters { - IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET = BIT(0), - IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH = BIT(1), - IWLAGN_WOWLAN_WAKEUP_BEACON_MISS = BIT(2), - IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE = BIT(3), - IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL = BIT(4), - IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ = BIT(5), - IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE = BIT(6), - IWLAGN_WOWLAN_WAKEUP_ALWAYS = BIT(7), - IWLAGN_WOWLAN_WAKEUP_ENABLE_NET_DETECT = BIT(8), -}; - -struct iwlagn_wowlan_wakeup_filter_cmd { - __le32 enabled; - __le16 non_qos_seq; - __le16 reserved; - __le16 qos_seq[8]; -}; - -/* - * REPLY_WOWLAN_TSC_RSC_PARAMS - */ -#define IWLAGN_NUM_RSC 16 - -struct tkip_sc { - __le16 iv16; - __le16 pad; - __le32 iv32; -} __packed; - -struct iwlagn_tkip_rsc_tsc { - struct tkip_sc unicast_rsc[IWLAGN_NUM_RSC]; - struct tkip_sc multicast_rsc[IWLAGN_NUM_RSC]; - struct tkip_sc tsc; -} __packed; - -struct aes_sc { - __le64 pn; -} __packed; - -struct iwlagn_aes_rsc_tsc { - struct aes_sc unicast_rsc[IWLAGN_NUM_RSC]; - struct aes_sc multicast_rsc[IWLAGN_NUM_RSC]; - struct aes_sc tsc; -} __packed; - -union iwlagn_all_tsc_rsc { - struct iwlagn_tkip_rsc_tsc tkip; - struct iwlagn_aes_rsc_tsc aes; -}; - -struct iwlagn_wowlan_rsc_tsc_params_cmd { - union iwlagn_all_tsc_rsc all_tsc_rsc; -} __packed; - -/* - * REPLY_WOWLAN_TKIP_PARAMS - */ -#define IWLAGN_MIC_KEY_SIZE 8 -#define IWLAGN_P1K_SIZE 5 -struct iwlagn_mic_keys { - u8 tx[IWLAGN_MIC_KEY_SIZE]; - u8 rx_unicast[IWLAGN_MIC_KEY_SIZE]; - u8 rx_mcast[IWLAGN_MIC_KEY_SIZE]; -} __packed; - -struct iwlagn_p1k_cache { - __le16 p1k[IWLAGN_P1K_SIZE]; -} __packed; - -#define IWLAGN_NUM_RX_P1K_CACHE 2 - -struct iwlagn_wowlan_tkip_params_cmd { - struct iwlagn_mic_keys mic_keys; - struct iwlagn_p1k_cache tx; - struct iwlagn_p1k_cache rx_uni[IWLAGN_NUM_RX_P1K_CACHE]; - struct iwlagn_p1k_cache rx_multi[IWLAGN_NUM_RX_P1K_CACHE]; -} __packed; - -/* - * REPLY_WOWLAN_KEK_KCK_MATERIAL - */ - -#define IWLAGN_KCK_MAX_SIZE 32 -#define IWLAGN_KEK_MAX_SIZE 32 - -struct iwlagn_wowlan_kek_kck_material_cmd { - u8 kck[IWLAGN_KCK_MAX_SIZE]; - u8 kek[IWLAGN_KEK_MAX_SIZE]; - __le16 kck_len; - __le16 kek_len; - __le64 replay_ctr; -} __packed; - -/* - * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification) - */ - -/* - * Minimum slot time in TU - */ -#define IWL_MIN_SLOT_TIME 20 - -/** - * struct iwl_wipan_slot - * @width: Time in TU - * @type: - * 0 - BSS - * 1 - PAN - */ -struct iwl_wipan_slot { - __le16 width; - u8 type; - u8 reserved; -} __packed; - -#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_CTS BIT(1) /* reserved */ -#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_QUIET BIT(2) /* reserved */ -#define IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE BIT(3) /* reserved */ -#define IWL_WIPAN_PARAMS_FLG_FILTER_BEACON_NOTIF BIT(4) -#define IWL_WIPAN_PARAMS_FLG_FULL_SLOTTED_MODE BIT(5) - -/** - * struct iwl_wipan_params_cmd - * @flags: - * bit0: reserved - * bit1: CP leave channel with CTS - * bit2: CP leave channel qith Quiet - * bit3: slotted mode - * 1 - work in slotted mode - * 0 - work in non slotted mode - * bit4: filter beacon notification - * bit5: full tx slotted mode. if this flag is set, - * uCode will perform leaving channel methods in context switch - * also when working in same channel mode - * @num_slots: 1 - 10 - */ -struct iwl_wipan_params_cmd { - __le16 flags; - u8 reserved; - u8 num_slots; - struct iwl_wipan_slot slots[10]; -} __packed; - -/* - * REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9 - * - * TODO: Figure out what this is used for, - * it can only switch between 2.4 GHz - * channels!! - */ - -struct iwl_wipan_p2p_channel_switch_cmd { - __le16 channel; - __le16 reserved; -}; - -/* - * REPLY_WIPAN_NOA_NOTIFICATION = 0xbc - * - * This is used by the device to notify us of the - * NoA schedule it determined so we can forward it - * to userspace for inclusion in probe responses. - * - * In beacons, the NoA schedule is simply appended - * to the frame we give the device. - */ - -struct iwl_wipan_noa_descriptor { - u8 count; - __le32 duration; - __le32 interval; - __le32 starttime; -} __packed; - -struct iwl_wipan_noa_attribute { - u8 id; - __le16 length; - u8 index; - u8 ct_window; - struct iwl_wipan_noa_descriptor descr0, descr1; - u8 reserved; -} __packed; - -struct iwl_wipan_noa_notification { - u32 noa_active; - struct iwl_wipan_noa_attribute noa_attribute; -} __packed; - -#endif /* __iwl_commands_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-core.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-core.c deleted file mode 100644 index 46490d3b..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-core.c +++ /dev/null @@ -1,1480 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/etherdevice.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-debug.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-power.h" -#include "iwl-shared.h" -#include "iwl-agn.h" -#include "iwl-trans.h" - -const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; - -#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ -#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ -static void iwl_init_ht_hw_capab(const struct iwl_priv *priv, - struct ieee80211_sta_ht_cap *ht_info, - enum ieee80211_band band) -{ - u16 max_bit_rate = 0; - u8 rx_chains_num = hw_params(priv).rx_chains_num; - u8 tx_chains_num = hw_params(priv).tx_chains_num; - - ht_info->cap = 0; - memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); - - ht_info->ht_supported = true; - - if (cfg(priv)->ht_params && - cfg(priv)->ht_params->ht_greenfield_support) - ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; - ht_info->cap |= IEEE80211_HT_CAP_SGI_20; - max_bit_rate = MAX_BIT_RATE_20_MHZ; - if (hw_params(priv).ht40_channel & BIT(band)) { - ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - ht_info->cap |= IEEE80211_HT_CAP_SGI_40; - ht_info->mcs.rx_mask[4] = 0x01; - max_bit_rate = MAX_BIT_RATE_40_MHZ; - } - - if (iwlagn_mod_params.amsdu_size_8K) - ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; - - ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; - ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; - - ht_info->mcs.rx_mask[0] = 0xFF; - if (rx_chains_num >= 2) - ht_info->mcs.rx_mask[1] = 0xFF; - if (rx_chains_num >= 3) - ht_info->mcs.rx_mask[2] = 0xFF; - - /* Highest supported Rx data rate */ - max_bit_rate *= rx_chains_num; - WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK); - ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate); - - /* Tx MCS capabilities */ - ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; - if (tx_chains_num != rx_chains_num) { - ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; - ht_info->mcs.tx_params |= ((tx_chains_num - 1) << - IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); - } -} - -/** - * iwl_init_geos - Initialize mac80211's geo/channel info based from eeprom - */ -int iwl_init_geos(struct iwl_priv *priv) -{ - struct iwl_channel_info *ch; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *channels; - struct ieee80211_channel *geo_ch; - struct ieee80211_rate *rates; - int i = 0; - s8 max_tx_power = IWLAGN_TX_POWER_TARGET_POWER_MIN; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || - priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { - IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n"); - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - return 0; - } - - channels = kcalloc(priv->channel_count, - sizeof(struct ieee80211_channel), GFP_KERNEL); - if (!channels) - return -ENOMEM; - - rates = kcalloc(IWL_RATE_COUNT_LEGACY, sizeof(struct ieee80211_rate), - GFP_KERNEL); - if (!rates) { - kfree(channels); - return -ENOMEM; - } - - /* 5.2GHz channels start after the 2.4GHz channels */ - sband = &priv->bands[IEEE80211_BAND_5GHZ]; - sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; - /* just OFDM */ - sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; - sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE; - - if (hw_params(priv).sku & EEPROM_SKU_CAP_11N_ENABLE) - iwl_init_ht_hw_capab(priv, &sband->ht_cap, - IEEE80211_BAND_5GHZ); - - sband = &priv->bands[IEEE80211_BAND_2GHZ]; - sband->channels = channels; - /* OFDM & CCK */ - sband->bitrates = rates; - sband->n_bitrates = IWL_RATE_COUNT_LEGACY; - - if (hw_params(priv).sku & EEPROM_SKU_CAP_11N_ENABLE) - iwl_init_ht_hw_capab(priv, &sband->ht_cap, - IEEE80211_BAND_2GHZ); - - priv->ieee_channels = channels; - priv->ieee_rates = rates; - - for (i = 0; i < priv->channel_count; i++) { - ch = &priv->channel_info[i]; - - /* FIXME: might be removed if scan is OK */ - if (!is_channel_valid(ch)) - continue; - - sband = &priv->bands[ch->band]; - - geo_ch = &sband->channels[sband->n_channels++]; - - geo_ch->center_freq = - ieee80211_channel_to_frequency(ch->channel, ch->band); - geo_ch->max_power = ch->max_power_avg; - geo_ch->max_antenna_gain = 0xff; - geo_ch->hw_value = ch->channel; - - if (is_channel_valid(ch)) { - if (!(ch->flags & EEPROM_CHANNEL_IBSS)) - geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; - - if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) - geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; - - if (ch->flags & EEPROM_CHANNEL_RADAR) - geo_ch->flags |= IEEE80211_CHAN_RADAR; - - geo_ch->flags |= ch->ht40_extension_channel; - - if (ch->max_power_avg > max_tx_power) - max_tx_power = ch->max_power_avg; - } else { - geo_ch->flags |= IEEE80211_CHAN_DISABLED; - } - - IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", - ch->channel, geo_ch->center_freq, - is_channel_a_band(ch) ? "5.2" : "2.4", - geo_ch->flags & IEEE80211_CHAN_DISABLED ? - "restricted" : "valid", - geo_ch->flags); - } - - priv->tx_power_device_lmt = max_tx_power; - priv->tx_power_user_lmt = max_tx_power; - priv->tx_power_next = max_tx_power; - - if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && - hw_params(priv).sku & EEPROM_SKU_CAP_BAND_52GHZ) { - IWL_INFO(priv, "Incorrectly detected BG card as ABG. " - "Please send your %s to maintainer.\n", - trans(priv)->hw_id_str); - hw_params(priv).sku &= ~EEPROM_SKU_CAP_BAND_52GHZ; - } - - IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n", - priv->bands[IEEE80211_BAND_2GHZ].n_channels, - priv->bands[IEEE80211_BAND_5GHZ].n_channels); - - set_bit(STATUS_GEO_CONFIGURED, &priv->status); - - return 0; -} - -/* - * iwl_free_geos - undo allocations in iwl_init_geos - */ -void iwl_free_geos(struct iwl_priv *priv) -{ - kfree(priv->ieee_channels); - kfree(priv->ieee_rates); - clear_bit(STATUS_GEO_CONFIGURED, &priv->status); -} - -static bool iwl_is_channel_extension(struct iwl_priv *priv, - enum ieee80211_band band, - u16 channel, u8 extension_chan_offset) -{ - const struct iwl_channel_info *ch_info; - - ch_info = iwl_get_channel_info(priv, band, channel); - if (!is_channel_valid(ch_info)) - return false; - - if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) - return !(ch_info->ht40_extension_channel & - IEEE80211_CHAN_NO_HT40PLUS); - else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) - return !(ch_info->ht40_extension_channel & - IEEE80211_CHAN_NO_HT40MINUS); - - return false; -} - -bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap) -{ - if (!ctx->ht.enabled || !ctx->ht.is_40mhz) - return false; - - /* - * We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40 - * the bit will not set if it is pure 40MHz case - */ - if (ht_cap && !ht_cap->ht_supported) - return false; - -#ifdef CONFIG_IWLWIFI_DEBUGFS - if (priv->disable_ht40) - return false; -#endif - - return iwl_is_channel_extension(priv, priv->band, - le16_to_cpu(ctx->staging.channel), - ctx->ht.extension_chan_offset); -} - -static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) -{ - u16 new_val; - u16 beacon_factor; - - /* - * If mac80211 hasn't given us a beacon interval, program - * the default into the device (not checking this here - * would cause the adjustment below to return the maximum - * value, which may break PAN.) - */ - if (!beacon_val) - return DEFAULT_BEACON_INTERVAL; - - /* - * If the beacon interval we obtained from the peer - * is too large, we'll have to wake up more often - * (and in IBSS case, we'll beacon too much) - * - * For example, if max_beacon_val is 4096, and the - * requested beacon interval is 7000, we'll have to - * use 3500 to be able to wake up on the beacons. - * - * This could badly influence beacon detection stats. - */ - - beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; - new_val = beacon_val / beacon_factor; - - if (!new_val) - new_val = max_beacon_val; - - return new_val; -} - -int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - u64 tsf; - s32 interval_tm, rem; - struct ieee80211_conf *conf = NULL; - u16 beacon_int; - struct ieee80211_vif *vif = ctx->vif; - - conf = &priv->hw->conf; - - lockdep_assert_held(&priv->mutex); - - memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd)); - - ctx->timing.timestamp = cpu_to_le64(priv->timestamp); - ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval); - - beacon_int = vif ? vif->bss_conf.beacon_int : 0; - - /* - * TODO: For IBSS we need to get atim_window from mac80211, - * for now just always use 0 - */ - ctx->timing.atim_window = 0; - - if (ctx->ctxid == IWL_RXON_CTX_PAN && - (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) && - iwl_is_associated(priv, IWL_RXON_CTX_BSS) && - priv->contexts[IWL_RXON_CTX_BSS].vif && - priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) { - ctx->timing.beacon_interval = - priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval; - beacon_int = le16_to_cpu(ctx->timing.beacon_interval); - } else if (ctx->ctxid == IWL_RXON_CTX_BSS && - iwl_is_associated(priv, IWL_RXON_CTX_PAN) && - priv->contexts[IWL_RXON_CTX_PAN].vif && - priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int && - (!iwl_is_associated_ctx(ctx) || !ctx->vif || - !ctx->vif->bss_conf.beacon_int)) { - ctx->timing.beacon_interval = - priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval; - beacon_int = le16_to_cpu(ctx->timing.beacon_interval); - } else { - beacon_int = iwl_adjust_beacon_interval(beacon_int, - IWL_MAX_UCODE_BEACON_INTERVAL * TIME_UNIT); - ctx->timing.beacon_interval = cpu_to_le16(beacon_int); - } - - ctx->beacon_int = beacon_int; - - tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */ - interval_tm = beacon_int * TIME_UNIT; - rem = do_div(tsf, interval_tm); - ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem); - - ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1; - - IWL_DEBUG_ASSOC(priv, - "beacon interval %d beacon timer %d beacon tim %d\n", - le16_to_cpu(ctx->timing.beacon_interval), - le32_to_cpu(ctx->timing.beacon_init_val), - le16_to_cpu(ctx->timing.atim_window)); - - return iwl_dvm_send_cmd_pdu(priv, ctx->rxon_timing_cmd, - CMD_SYNC, sizeof(ctx->timing), &ctx->timing); -} - -void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - int hw_decrypt) -{ - struct iwl_rxon_cmd *rxon = &ctx->staging; - - if (hw_decrypt) - rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; - else - rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; - -} - -/* validate RXON structure is valid */ -int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - struct iwl_rxon_cmd *rxon = &ctx->staging; - u32 errors = 0; - - if (rxon->flags & RXON_FLG_BAND_24G_MSK) { - if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) { - IWL_WARN(priv, "check 2.4G: wrong narrow\n"); - errors |= BIT(0); - } - if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) { - IWL_WARN(priv, "check 2.4G: wrong radar\n"); - errors |= BIT(1); - } - } else { - if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) { - IWL_WARN(priv, "check 5.2G: not short slot!\n"); - errors |= BIT(2); - } - if (rxon->flags & RXON_FLG_CCK_MSK) { - IWL_WARN(priv, "check 5.2G: CCK!\n"); - errors |= BIT(3); - } - } - if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) { - IWL_WARN(priv, "mac/bssid mcast!\n"); - errors |= BIT(4); - } - - /* make sure basic rates 6Mbps and 1Mbps are supported */ - if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 && - (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) { - IWL_WARN(priv, "neither 1 nor 6 are basic\n"); - errors |= BIT(5); - } - - if (le16_to_cpu(rxon->assoc_id) > 2007) { - IWL_WARN(priv, "aid > 2007\n"); - errors |= BIT(6); - } - - if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) { - IWL_WARN(priv, "CCK and short slot\n"); - errors |= BIT(7); - } - - if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) - == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) { - IWL_WARN(priv, "CCK and auto detect"); - errors |= BIT(8); - } - - if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | - RXON_FLG_TGG_PROTECT_MSK)) == - RXON_FLG_TGG_PROTECT_MSK) { - IWL_WARN(priv, "TGg but no auto-detect\n"); - errors |= BIT(9); - } - - if (rxon->channel == 0) { - IWL_WARN(priv, "zero channel is invalid\n"); - errors |= BIT(10); - } - - WARN(errors, "Invalid RXON (%#x), channel %d", - errors, le16_to_cpu(rxon->channel)); - - return errors ? -EINVAL : 0; -} - -/** - * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed - * @priv: staging_rxon is compared to active_rxon - * - * If the RXON structure is changing enough to require a new tune, - * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that - * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. - */ -int iwl_full_rxon_required(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - const struct iwl_rxon_cmd *staging = &ctx->staging; - const struct iwl_rxon_cmd *active = &ctx->active; - -#define CHK(cond) \ - if ((cond)) { \ - IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n"); \ - return 1; \ - } - -#define CHK_NEQ(c1, c2) \ - if ((c1) != (c2)) { \ - IWL_DEBUG_INFO(priv, "need full RXON - " \ - #c1 " != " #c2 " - %d != %d\n", \ - (c1), (c2)); \ - return 1; \ - } - - /* These items are only settable from the full RXON command */ - CHK(!iwl_is_associated_ctx(ctx)); - CHK(compare_ether_addr(staging->bssid_addr, active->bssid_addr)); - CHK(compare_ether_addr(staging->node_addr, active->node_addr)); - CHK(compare_ether_addr(staging->wlap_bssid_addr, - active->wlap_bssid_addr)); - CHK_NEQ(staging->dev_type, active->dev_type); - CHK_NEQ(staging->channel, active->channel); - CHK_NEQ(staging->air_propagation, active->air_propagation); - CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates, - active->ofdm_ht_single_stream_basic_rates); - CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates, - active->ofdm_ht_dual_stream_basic_rates); - CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates, - active->ofdm_ht_triple_stream_basic_rates); - CHK_NEQ(staging->assoc_id, active->assoc_id); - - /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can - * be updated with the RXON_ASSOC command -- however only some - * flag transitions are allowed using RXON_ASSOC */ - - /* Check if we are not switching bands */ - CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK, - active->flags & RXON_FLG_BAND_24G_MSK); - - /* Check if we are switching association toggle */ - CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK, - active->filter_flags & RXON_FILTER_ASSOC_MSK); - -#undef CHK -#undef CHK_NEQ - - return 0; -} - -static void _iwl_set_rxon_ht(struct iwl_priv *priv, - struct iwl_ht_config *ht_conf, - struct iwl_rxon_context *ctx) -{ - struct iwl_rxon_cmd *rxon = &ctx->staging; - - if (!ctx->ht.enabled) { - rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | - RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | - RXON_FLG_HT40_PROT_MSK | - RXON_FLG_HT_PROT_MSK); - return; - } - - /* FIXME: if the definition of ht.protection changed, the "translation" - * will be needed for rxon->flags - */ - rxon->flags |= cpu_to_le32(ctx->ht.protection << RXON_FLG_HT_OPERATING_MODE_POS); - - /* Set up channel bandwidth: - * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ - /* clear the HT channel mode before set the mode */ - rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | - RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); - if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) { - /* pure ht40 */ - if (ctx->ht.protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { - rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; - /* Note: control channel is opposite of extension channel */ - switch (ctx->ht.extension_chan_offset) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - break; - } - } else { - /* Note: control channel is opposite of extension channel */ - switch (ctx->ht.extension_chan_offset) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); - rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; - rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; - break; - case IEEE80211_HT_PARAM_CHA_SEC_NONE: - default: - /* channel location only valid if in Mixed mode */ - IWL_ERR(priv, "invalid extension channel offset\n"); - break; - } - } - } else { - rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; - } - - iwlagn_set_rxon_chain(priv, ctx); - - IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X " - "extension channel offset 0x%x\n", - le32_to_cpu(rxon->flags), ctx->ht.protection, - ctx->ht.extension_chan_offset); -} - -void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf) -{ - struct iwl_rxon_context *ctx; - - for_each_context(priv, ctx) - _iwl_set_rxon_ht(priv, ht_conf, ctx); -} - -/* Return valid, unused, channel for a passive scan to reset the RF */ -u8 iwl_get_single_channel_number(struct iwl_priv *priv, - enum ieee80211_band band) -{ - const struct iwl_channel_info *ch_info; - int i; - u8 channel = 0; - u8 min, max; - struct iwl_rxon_context *ctx; - - if (band == IEEE80211_BAND_5GHZ) { - min = 14; - max = priv->channel_count; - } else { - min = 0; - max = 14; - } - - for (i = min; i < max; i++) { - bool busy = false; - - for_each_context(priv, ctx) { - busy = priv->channel_info[i].channel == - le16_to_cpu(ctx->staging.channel); - if (busy) - break; - } - - if (busy) - continue; - - channel = priv->channel_info[i].channel; - ch_info = iwl_get_channel_info(priv, band, channel); - if (is_channel_valid(ch_info)) - break; - } - - return channel; -} - -/** - * iwl_set_rxon_channel - Set the band and channel values in staging RXON - * @ch: requested channel as a pointer to struct ieee80211_channel - - * NOTE: Does not commit to the hardware; it sets appropriate bit fields - * in the staging RXON flag structure based on the ch->band - */ -void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, - struct iwl_rxon_context *ctx) -{ - enum ieee80211_band band = ch->band; - u16 channel = ch->hw_value; - - if ((le16_to_cpu(ctx->staging.channel) == channel) && - (priv->band == band)) - return; - - ctx->staging.channel = cpu_to_le16(channel); - if (band == IEEE80211_BAND_5GHZ) - ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK; - else - ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; - - priv->band = band; - - IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band); - -} - -void iwl_set_flags_for_band(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - enum ieee80211_band band, - struct ieee80211_vif *vif) -{ - if (band == IEEE80211_BAND_5GHZ) { - ctx->staging.flags &= - ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK - | RXON_FLG_CCK_MSK); - ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; - } else { - /* Copied from iwl_post_associate() */ - if (vif && vif->bss_conf.use_short_slot) - ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; - else - ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; - - ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; - ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK; - ctx->staging.flags &= ~RXON_FLG_CCK_MSK; - } -} - -/* - * initialize rxon structure with default values from eeprom - */ -void iwl_connection_init_rx_config(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - const struct iwl_channel_info *ch_info; - - memset(&ctx->staging, 0, sizeof(ctx->staging)); - - if (!ctx->vif) { - ctx->staging.dev_type = ctx->unused_devtype; - } else switch (ctx->vif->type) { - case NL80211_IFTYPE_AP: - ctx->staging.dev_type = ctx->ap_devtype; - break; - - case NL80211_IFTYPE_STATION: - ctx->staging.dev_type = ctx->station_devtype; - ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - break; - - case NL80211_IFTYPE_ADHOC: - ctx->staging.dev_type = ctx->ibss_devtype; - ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; - ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | - RXON_FILTER_ACCEPT_GRP_MSK; - break; - - default: - IWL_ERR(priv, "Unsupported interface type %d\n", - ctx->vif->type); - break; - } - -#if 0 - /* TODO: Figure out when short_preamble would be set and cache from - * that */ - if (!hw_to_local(priv->hw)->short_preamble) - ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; - else - ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; -#endif - - ch_info = iwl_get_channel_info(priv, priv->band, - le16_to_cpu(ctx->active.channel)); - - if (!ch_info) - ch_info = &priv->channel_info[0]; - - ctx->staging.channel = cpu_to_le16(ch_info->channel); - priv->band = ch_info->band; - - iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif); - - ctx->staging.ofdm_basic_rates = - (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - ctx->staging.cck_basic_rates = - (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - /* clear both MIX and PURE40 mode flag */ - ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED | - RXON_FLG_CHANNEL_MODE_PURE_40); - if (ctx->vif) - memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN); - - ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff; - ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff; - ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff; -} - -void iwl_set_rate(struct iwl_priv *priv) -{ - const struct ieee80211_supported_band *hw = NULL; - struct ieee80211_rate *rate; - struct iwl_rxon_context *ctx; - int i; - - hw = iwl_get_hw_mode(priv, priv->band); - if (!hw) { - IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n"); - return; - } - - priv->active_rate = 0; - - for (i = 0; i < hw->n_bitrates; i++) { - rate = &(hw->bitrates[i]); - if (rate->hw_value < IWL_RATE_COUNT_LEGACY) - priv->active_rate |= (1 << rate->hw_value); - } - - IWL_DEBUG_RATE(priv, "Set active_rate = %0x\n", priv->active_rate); - - for_each_context(priv, ctx) { - ctx->staging.cck_basic_rates = - (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; - - ctx->staging.ofdm_basic_rates = - (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; - } -} - -void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) -{ - /* - * MULTI-FIXME - * See iwlagn_mac_channel_switch. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) - ieee80211_chswitch_done(ctx->vif, is_success); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -void iwl_print_rx_config_cmd(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid) -{ - struct iwl_rxon_context *ctx = &priv->contexts[ctxid]; - struct iwl_rxon_cmd *rxon = &ctx->staging; - - IWL_DEBUG_RADIO(priv, "RX CONFIG:\n"); - iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); - IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); - IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); - IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n", - le32_to_cpu(rxon->filter_flags)); - IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type); - IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n", - rxon->ofdm_basic_rates); - IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); - IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr); - IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); - IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); -} -#endif - -static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand) -{ - unsigned int reload_msec; - unsigned long reload_jiffies; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_FW_ERRORS)) - iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS); -#endif - - /* uCode is no longer loaded. */ - priv->ucode_loaded = false; - - /* Set the FW error flag -- cleared on iwl_down */ - set_bit(STATUS_FW_ERROR, &priv->shrd->status); - - /* Cancel currently queued command. */ - clear_bit(STATUS_HCMD_ACTIVE, &priv->shrd->status); - - iwl_abort_notification_waits(&priv->notif_wait); - - /* Keep the restart process from trying to send host - * commands by clearing the ready bit */ - clear_bit(STATUS_READY, &priv->status); - - wake_up(&trans(priv)->wait_command_queue); - - if (!ondemand) { - /* - * If firmware keep reloading, then it indicate something - * serious wrong and firmware having problem to recover - * from it. Instead of keep trying which will fill the syslog - * and hang the system, let's just stop it - */ - reload_jiffies = jiffies; - reload_msec = jiffies_to_msecs((long) reload_jiffies - - (long) priv->reload_jiffies); - priv->reload_jiffies = reload_jiffies; - if (reload_msec <= IWL_MIN_RELOAD_DURATION) { - priv->reload_count++; - if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) { - IWL_ERR(priv, "BUG_ON, Stop restarting\n"); - return; - } - } else - priv->reload_count = 0; - } - - if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { - if (iwlagn_mod_params.restart_fw) { - IWL_DEBUG_FW_ERRORS(priv, - "Restarting adapter due to uCode error.\n"); - queue_work(priv->workqueue, &priv->restart); - } else - IWL_DEBUG_FW_ERRORS(priv, - "Detected FW error, but not restarting\n"); - } -} - -int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) -{ - int ret; - s8 prev_tx_power; - bool defer; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - - lockdep_assert_held(&priv->mutex); - - if (priv->tx_power_user_lmt == tx_power && !force) - return 0; - - if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) { - IWL_WARN(priv, - "Requested user TXPOWER %d below lower limit %d.\n", - tx_power, - IWLAGN_TX_POWER_TARGET_POWER_MIN); - return -EINVAL; - } - - if (tx_power > priv->tx_power_device_lmt) { - IWL_WARN(priv, - "Requested user TXPOWER %d above upper limit %d.\n", - tx_power, priv->tx_power_device_lmt); - return -EINVAL; - } - - if (!iwl_is_ready_rf(priv)) - return -EIO; - - /* scan complete and commit_rxon use tx_power_next value, - * it always need to be updated for newest request */ - priv->tx_power_next = tx_power; - - /* do not set tx power when scanning or channel changing */ - defer = test_bit(STATUS_SCANNING, &priv->status) || - memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)); - if (defer && !force) { - IWL_DEBUG_INFO(priv, "Deferring tx power set\n"); - return 0; - } - - prev_tx_power = priv->tx_power_user_lmt; - priv->tx_power_user_lmt = tx_power; - - ret = iwlagn_send_tx_power(priv); - - /* if fail to set tx_power, restore the orig. tx power */ - if (ret) { - priv->tx_power_user_lmt = prev_tx_power; - priv->tx_power_next = prev_tx_power; - } - return ret; -} - -void iwl_send_bt_config(struct iwl_priv *priv) -{ - struct iwl_bt_cmd bt_cmd = { - .lead_time = BT_LEAD_TIME_DEF, - .max_kill = BT_MAX_KILL_DEF, - .kill_ack_mask = 0, - .kill_cts_mask = 0, - }; - - if (!iwlagn_mod_params.bt_coex_active) - bt_cmd.flags = BT_COEX_DISABLE; - else - bt_cmd.flags = BT_COEX_ENABLE; - - priv->bt_enable_flag = bt_cmd.flags; - IWL_DEBUG_INFO(priv, "BT coex %s\n", - (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active"); - - if (iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, - CMD_SYNC, sizeof(struct iwl_bt_cmd), &bt_cmd)) - IWL_ERR(priv, "failed to send BT Coex Config\n"); -} - -int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear) -{ - struct iwl_statistics_cmd statistics_cmd = { - .configuration_flags = - clear ? IWL_STATS_CONF_CLEAR_STATS : 0, - }; - - if (flags & CMD_ASYNC) - return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, - CMD_ASYNC, - sizeof(struct iwl_statistics_cmd), - &statistics_cmd); - else - return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD, - CMD_SYNC, - sizeof(struct iwl_statistics_cmd), - &statistics_cmd); -} - - - - -#ifdef CONFIG_IWLWIFI_DEBUGFS - -#define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES) - -void iwl_reset_traffic_log(struct iwl_priv *priv) -{ - priv->tx_traffic_idx = 0; - priv->rx_traffic_idx = 0; - if (priv->tx_traffic) - memset(priv->tx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); - if (priv->rx_traffic) - memset(priv->rx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); -} - -int iwl_alloc_traffic_mem(struct iwl_priv *priv) -{ - u32 traffic_size = IWL_TRAFFIC_DUMP_SIZE; - - if (iwl_have_debug_level(IWL_DL_TX)) { - if (!priv->tx_traffic) { - priv->tx_traffic = - kzalloc(traffic_size, GFP_KERNEL); - if (!priv->tx_traffic) - return -ENOMEM; - } - } - if (iwl_have_debug_level(IWL_DL_RX)) { - if (!priv->rx_traffic) { - priv->rx_traffic = - kzalloc(traffic_size, GFP_KERNEL); - if (!priv->rx_traffic) - return -ENOMEM; - } - } - iwl_reset_traffic_log(priv); - return 0; -} - -void iwl_free_traffic_mem(struct iwl_priv *priv) -{ - kfree(priv->tx_traffic); - priv->tx_traffic = NULL; - - kfree(priv->rx_traffic); - priv->rx_traffic = NULL; -} - -void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header) -{ - __le16 fc; - u16 len; - - if (likely(!iwl_have_debug_level(IWL_DL_TX))) - return; - - if (!priv->tx_traffic) - return; - - fc = header->frame_control; - if (ieee80211_is_data(fc)) { - len = (length > IWL_TRAFFIC_ENTRY_SIZE) - ? IWL_TRAFFIC_ENTRY_SIZE : length; - memcpy((priv->tx_traffic + - (priv->tx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), - header, len); - priv->tx_traffic_idx = - (priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; - } -} - -void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header) -{ - __le16 fc; - u16 len; - - if (likely(!iwl_have_debug_level(IWL_DL_RX))) - return; - - if (!priv->rx_traffic) - return; - - fc = header->frame_control; - if (ieee80211_is_data(fc)) { - len = (length > IWL_TRAFFIC_ENTRY_SIZE) - ? IWL_TRAFFIC_ENTRY_SIZE : length; - memcpy((priv->rx_traffic + - (priv->rx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), - header, len); - priv->rx_traffic_idx = - (priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; - } -} - -const char *get_mgmt_string(int cmd) -{ - switch (cmd) { - IWL_CMD(MANAGEMENT_ASSOC_REQ); - IWL_CMD(MANAGEMENT_ASSOC_RESP); - IWL_CMD(MANAGEMENT_REASSOC_REQ); - IWL_CMD(MANAGEMENT_REASSOC_RESP); - IWL_CMD(MANAGEMENT_PROBE_REQ); - IWL_CMD(MANAGEMENT_PROBE_RESP); - IWL_CMD(MANAGEMENT_BEACON); - IWL_CMD(MANAGEMENT_ATIM); - IWL_CMD(MANAGEMENT_DISASSOC); - IWL_CMD(MANAGEMENT_AUTH); - IWL_CMD(MANAGEMENT_DEAUTH); - IWL_CMD(MANAGEMENT_ACTION); - default: - return "UNKNOWN"; - - } -} - -const char *get_ctrl_string(int cmd) -{ - switch (cmd) { - IWL_CMD(CONTROL_BACK_REQ); - IWL_CMD(CONTROL_BACK); - IWL_CMD(CONTROL_PSPOLL); - IWL_CMD(CONTROL_RTS); - IWL_CMD(CONTROL_CTS); - IWL_CMD(CONTROL_ACK); - IWL_CMD(CONTROL_CFEND); - IWL_CMD(CONTROL_CFENDACK); - default: - return "UNKNOWN"; - - } -} - -void iwl_clear_traffic_stats(struct iwl_priv *priv) -{ - memset(&priv->tx_stats, 0, sizeof(struct traffic_stats)); - memset(&priv->rx_stats, 0, sizeof(struct traffic_stats)); -} - -/* - * if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will - * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass. - * Use debugFs to display the rx/rx_statistics - * if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL - * information will be recorded, but DATA pkt still will be recorded - * for the reason of iwl_led.c need to control the led blinking based on - * number of tx and rx data. - * - */ -void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len) -{ - struct traffic_stats *stats; - - if (is_tx) - stats = &priv->tx_stats; - else - stats = &priv->rx_stats; - - if (ieee80211_is_mgmt(fc)) { - switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { - case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): - stats->mgmt[MANAGEMENT_ASSOC_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP): - stats->mgmt[MANAGEMENT_ASSOC_RESP]++; - break; - case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): - stats->mgmt[MANAGEMENT_REASSOC_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP): - stats->mgmt[MANAGEMENT_REASSOC_RESP]++; - break; - case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): - stats->mgmt[MANAGEMENT_PROBE_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP): - stats->mgmt[MANAGEMENT_PROBE_RESP]++; - break; - case cpu_to_le16(IEEE80211_STYPE_BEACON): - stats->mgmt[MANAGEMENT_BEACON]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ATIM): - stats->mgmt[MANAGEMENT_ATIM]++; - break; - case cpu_to_le16(IEEE80211_STYPE_DISASSOC): - stats->mgmt[MANAGEMENT_DISASSOC]++; - break; - case cpu_to_le16(IEEE80211_STYPE_AUTH): - stats->mgmt[MANAGEMENT_AUTH]++; - break; - case cpu_to_le16(IEEE80211_STYPE_DEAUTH): - stats->mgmt[MANAGEMENT_DEAUTH]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ACTION): - stats->mgmt[MANAGEMENT_ACTION]++; - break; - } - } else if (ieee80211_is_ctl(fc)) { - switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { - case cpu_to_le16(IEEE80211_STYPE_BACK_REQ): - stats->ctrl[CONTROL_BACK_REQ]++; - break; - case cpu_to_le16(IEEE80211_STYPE_BACK): - stats->ctrl[CONTROL_BACK]++; - break; - case cpu_to_le16(IEEE80211_STYPE_PSPOLL): - stats->ctrl[CONTROL_PSPOLL]++; - break; - case cpu_to_le16(IEEE80211_STYPE_RTS): - stats->ctrl[CONTROL_RTS]++; - break; - case cpu_to_le16(IEEE80211_STYPE_CTS): - stats->ctrl[CONTROL_CTS]++; - break; - case cpu_to_le16(IEEE80211_STYPE_ACK): - stats->ctrl[CONTROL_ACK]++; - break; - case cpu_to_le16(IEEE80211_STYPE_CFEND): - stats->ctrl[CONTROL_CFEND]++; - break; - case cpu_to_le16(IEEE80211_STYPE_CFENDACK): - stats->ctrl[CONTROL_CFENDACK]++; - break; - } - } else { - /* data */ - stats->data_cnt++; - stats->data_bytes += len; - } -} -#endif - -static void iwl_force_rf_reset(struct iwl_priv *priv) -{ - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (!iwl_is_any_associated(priv)) { - IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n"); - return; - } - /* - * There is no easy and better way to force reset the radio, - * the only known method is switching channel which will force to - * reset and tune the radio. - * Use internal short scan (single channel) operation to should - * achieve this objective. - * Driver should reset the radio when number of consecutive missed - * beacon, or any other uCode error condition detected. - */ - IWL_DEBUG_INFO(priv, "perform radio reset.\n"); - iwl_internal_short_hw_scan(priv); -} - - -int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) -{ - struct iwl_force_reset *force_reset; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return -EINVAL; - - if (mode >= IWL_MAX_FORCE_RESET) { - IWL_DEBUG_INFO(priv, "invalid reset request.\n"); - return -EINVAL; - } - force_reset = &priv->force_reset[mode]; - force_reset->reset_request_count++; - if (!external) { - if (force_reset->last_force_reset_jiffies && - time_after(force_reset->last_force_reset_jiffies + - force_reset->reset_duration, jiffies)) { - IWL_DEBUG_INFO(priv, "force reset rejected\n"); - force_reset->reset_reject_count++; - return -EAGAIN; - } - } - force_reset->reset_success_count++; - force_reset->last_force_reset_jiffies = jiffies; - IWL_DEBUG_INFO(priv, "perform force reset (%d)\n", mode); - switch (mode) { - case IWL_RF_RESET: - iwl_force_rf_reset(priv); - break; - case IWL_FW_RESET: - /* - * if the request is from external(ex: debugfs), - * then always perform the request in regardless the module - * parameter setting - * if the request is from internal (uCode error or driver - * detect failure), then fw_restart module parameter - * need to be check before performing firmware reload - */ - if (!external && !iwlagn_mod_params.restart_fw) { - IWL_DEBUG_INFO(priv, "Cancel firmware reload based on " - "module parameter setting\n"); - break; - } - IWL_ERR(priv, "On demand firmware reload\n"); - iwlagn_fw_error(priv, true); - break; - } - return 0; -} - - -int iwl_cmd_echo_test(struct iwl_priv *priv) -{ - int ret; - struct iwl_host_cmd cmd = { - .id = REPLY_ECHO, - .len = { 0 }, - .flags = CMD_SYNC, - }; - - ret = iwl_dvm_send_cmd(priv, &cmd); - if (ret) - IWL_ERR(priv, "echo testing fail: 0X%x\n", ret); - else - IWL_DEBUG_INFO(priv, "echo testing pass\n"); - return ret; -} - -static inline int iwl_check_stuck_queue(struct iwl_priv *priv, int txq) -{ - if (iwl_trans_check_stuck_queue(trans(priv), txq)) { - int ret; - ret = iwl_force_reset(priv, IWL_FW_RESET, false); - return (ret == -EAGAIN) ? 0 : 1; - } - return 0; -} - -/* - * Making watchdog tick be a quarter of timeout assure we will - * discover the queue hung between timeout and 1.25*timeout - */ -#define IWL_WD_TICK(timeout) ((timeout) / 4) - -/* - * Watchdog timer callback, we check each tx queue for stuck, if if hung - * we reset the firmware. If everything is fine just rearm the timer. - */ -void iwl_bg_watchdog(unsigned long data) -{ - struct iwl_priv *priv = (struct iwl_priv *)data; - int cnt; - unsigned long timeout; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) - return; - - if (iwl_is_rfkill(priv)) - return; - - timeout = hw_params(priv).wd_timeout; - if (timeout == 0) - return; - - /* monitor and check for stuck queues */ - for (cnt = 0; cnt < cfg(priv)->base_params->num_of_queues; cnt++) - if (iwl_check_stuck_queue(priv, cnt)) - return; - - mod_timer(&priv->watchdog, jiffies + - msecs_to_jiffies(IWL_WD_TICK(timeout))); -} - -void iwl_setup_watchdog(struct iwl_priv *priv) -{ - unsigned int timeout = hw_params(priv).wd_timeout; - - if (!iwlagn_mod_params.wd_disable) { - /* use system default */ - if (timeout && !cfg(priv)->base_params->wd_disable) - mod_timer(&priv->watchdog, - jiffies + - msecs_to_jiffies(IWL_WD_TICK(timeout))); - else - del_timer(&priv->watchdog); - } else { - /* module parameter overwrite default configuration */ - if (timeout && iwlagn_mod_params.wd_disable == 2) - mod_timer(&priv->watchdog, - jiffies + - msecs_to_jiffies(IWL_WD_TICK(timeout))); - else - del_timer(&priv->watchdog); - } -} - -/** - * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time - * @priv -- pointer to iwl_priv data structure - * @tsf_bits -- number of bits need to shift for masking) - */ -static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv, - u16 tsf_bits) -{ - return (1 << tsf_bits) - 1; -} - -/** - * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time - * @priv -- pointer to iwl_priv data structure - * @tsf_bits -- number of bits need to shift for masking) - */ -static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv, - u16 tsf_bits) -{ - return ((1 << (32 - tsf_bits)) - 1) << tsf_bits; -} - -/* - * extended beacon time format - * time in usec will be changed into a 32-bit value in extended:internal format - * the extended part is the beacon counts - * the internal part is the time in usec within one beacon interval - */ -u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval) -{ - u32 quot; - u32 rem; - u32 interval = beacon_interval * TIME_UNIT; - - if (!interval || !usec) - return 0; - - quot = (usec / interval) & - (iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >> - IWLAGN_EXT_BEACON_TIME_POS); - rem = (usec % interval) & iwl_beacon_time_mask_low(priv, - IWLAGN_EXT_BEACON_TIME_POS); - - return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem; -} - -/* base is usually what we get from ucode with each received frame, - * the same as HW timer counter counting down - */ -__le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, - u32 addon, u32 beacon_interval) -{ - u32 base_low = base & iwl_beacon_time_mask_low(priv, - IWLAGN_EXT_BEACON_TIME_POS); - u32 addon_low = addon & iwl_beacon_time_mask_low(priv, - IWLAGN_EXT_BEACON_TIME_POS); - u32 interval = beacon_interval * TIME_UNIT; - u32 res = (base & iwl_beacon_time_mask_high(priv, - IWLAGN_EXT_BEACON_TIME_POS)) + - (addon & iwl_beacon_time_mask_high(priv, - IWLAGN_EXT_BEACON_TIME_POS)); - - if (base_low > addon_low) - res += base_low - addon_low; - else if (base_low < addon_low) { - res += interval + base_low - addon_low; - res += (1 << IWLAGN_EXT_BEACON_TIME_POS); - } else - res += (1 << IWLAGN_EXT_BEACON_TIME_POS); - - return cpu_to_le32(res); -} - -void iwl_nic_error(struct iwl_op_mode *op_mode) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - iwlagn_fw_error(priv, false); -} - -void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state) -{ - struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode); - - if (state) - set_bit(STATUS_RF_KILL_HW, &priv->status); - else - clear_bit(STATUS_RF_KILL_HW, &priv->status); - - wiphy_rfkill_set_hw_state(priv->hw->wiphy, state); -} - -void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) -{ - struct ieee80211_tx_info *info; - - info = IEEE80211_SKB_CB(skb); - kmem_cache_free(iwl_tx_cmd_pool, (info->driver_data[1])); - dev_kfree_skb_any(skb); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-core.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-core.h deleted file mode 100644 index 635eb685..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-core.h +++ /dev/null @@ -1,234 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_core_h__ -#define __iwl_core_h__ - -#include "iwl-dev.h" -#include "iwl-io.h" - -/************************ - * forward declarations * - ************************/ -struct iwl_host_cmd; -struct iwl_cmd; - -#define TIME_UNIT 1024 - -struct iwl_lib_ops { - /* set hw dependent parameters */ - void (*set_hw_params)(struct iwl_priv *priv); - int (*set_channel_switch)(struct iwl_priv *priv, - struct ieee80211_channel_switch *ch_switch); - /* device specific configuration */ - void (*nic_config)(struct iwl_priv *priv); - - /* eeprom operations (as defined in iwl-eeprom.h) */ - struct iwl_eeprom_ops eeprom_ops; - - /* temperature */ - void (*temperature)(struct iwl_priv *priv); -}; - -/*************************** - * L i b * - ***************************/ - -void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - int hw_decrypt); -int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx); -int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx); -void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, - struct iwl_rxon_context *ctx); -void iwl_set_flags_for_band(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - enum ieee80211_band band, - struct ieee80211_vif *vif); -u8 iwl_get_single_channel_number(struct iwl_priv *priv, - enum ieee80211_band band); -void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf); -bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, - struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap); -void iwl_connection_init_rx_config(struct iwl_priv *priv, - struct iwl_rxon_context *ctx); -void iwl_set_rate(struct iwl_priv *priv); -int iwl_cmd_echo_test(struct iwl_priv *priv); -#ifdef CONFIG_IWLWIFI_DEBUGFS -int iwl_alloc_traffic_mem(struct iwl_priv *priv); -void iwl_free_traffic_mem(struct iwl_priv *priv); -void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header); -void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header); -const char *get_mgmt_string(int cmd); -const char *get_ctrl_string(int cmd); -void iwl_clear_traffic_stats(struct iwl_priv *priv); -void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, - u16 len); -void iwl_reset_traffic_log(struct iwl_priv *priv); - -#else -static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv) -{ - return 0; -} -static inline void iwl_free_traffic_mem(struct iwl_priv *priv) -{ -} -static inline void iwl_reset_traffic_log(struct iwl_priv *priv) -{ -} -static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header) -{ -} -static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, - u16 length, struct ieee80211_hdr *header) -{ -} -static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx, - __le16 fc, u16 len) -{ -} -#endif - -/***************************************************** -* RX -******************************************************/ -void iwl_chswitch_done(struct iwl_priv *priv, bool is_success); - -void iwl_setup_watchdog(struct iwl_priv *priv); -/***************************************************** - * TX power - ****************************************************/ -int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force); - -/******************************************************************************* - * Scanning - ******************************************************************************/ -void iwl_init_scan_params(struct iwl_priv *priv); -int iwl_scan_cancel(struct iwl_priv *priv); -void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); -void iwl_force_scan_end(struct iwl_priv *priv); -void iwl_internal_short_hw_scan(struct iwl_priv *priv); -int iwl_force_reset(struct iwl_priv *priv, int mode, bool external); -void iwl_setup_rx_scan_handlers(struct iwl_priv *priv); -void iwl_setup_scan_deferred_work(struct iwl_priv *priv); -void iwl_cancel_scan_deferred_work(struct iwl_priv *priv); -int __must_check iwl_scan_initiate(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum iwl_scan_type scan_type, - enum ieee80211_band band); - -/* For faster active scanning, scan will move to the next channel if fewer than - * PLCP_QUIET_THRESH packets are heard on this channel within - * ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell - * time if it's a quiet channel (nothing responded to our probe, and there's - * no other traffic). - * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */ -#define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */ -#define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */ - -#define IWL_SCAN_CHECK_WATCHDOG (HZ * 7) - -/* traffic log definitions */ -#define IWL_TRAFFIC_ENTRIES (256) -#define IWL_TRAFFIC_ENTRY_SIZE (64) - -/***************************************************** - * S e n d i n g H o s t C o m m a n d s * - *****************************************************/ - -void iwl_bg_watchdog(unsigned long data); -u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval); -__le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base, - u32 addon, u32 beacon_interval); - - -/***************************************************** -* GEOS -******************************************************/ -int iwl_init_geos(struct iwl_priv *priv); -void iwl_free_geos(struct iwl_priv *priv); - -extern void iwl_send_bt_config(struct iwl_priv *priv); -extern int iwl_send_statistics_request(struct iwl_priv *priv, - u8 flags, bool clear); - -int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx); - -static inline const struct ieee80211_supported_band *iwl_get_hw_mode( - struct iwl_priv *priv, enum ieee80211_band band) -{ - return priv->hw->wiphy->bands[band]; -} - -static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv) -{ - return cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist; -} - -extern bool bt_siso_mode; - -#endif /* __iwl_core_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-csr.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-csr.h deleted file mode 100644 index 5f96ce10..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-csr.h +++ /dev/null @@ -1,460 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_csr_h__ -#define __iwl_csr_h__ -/* - * CSR (control and status registers) - * - * CSR registers are mapped directly into PCI bus space, and are accessible - * whenever platform supplies power to device, even when device is in - * low power states due to driver-invoked device resets - * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes. - * - * Use iwl_write32() and iwl_read32() family to access these registers; - * these provide simple PCI bus access, without waking up the MAC. - * Do not use iwl_write_direct32() family for these registers; - * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ. - * The MAC (uCode processor, etc.) does not need to be powered up for accessing - * the CSR registers. - * - * NOTE: Device does need to be awake in order to read this memory - * via CSR_EEPROM and CSR_OTP registers - */ -#define CSR_BASE (0x000) - -#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */ -#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */ -#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */ -#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */ -#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/ -#define CSR_GPIO_IN (CSR_BASE+0x018) /* read external chip pins */ -#define CSR_RESET (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/ -#define CSR_GP_CNTRL (CSR_BASE+0x024) - -/* 2nd byte of CSR_INT_COALESCING, not accessible via iwl_write32()! */ -#define CSR_INT_PERIODIC_REG (CSR_BASE+0x005) - -/* - * Hardware revision info - * Bit fields: - * 31-8: Reserved - * 7-4: Type of device: see CSR_HW_REV_TYPE_xxx definitions - * 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D - * 1-0: "Dash" (-) value, as in A-1, etc. - * - * NOTE: Revision step affects calculation of CCK txpower for 4965. - * NOTE: See also CSR_HW_REV_WA_REG (work-around for bug in 4965). - */ -#define CSR_HW_REV (CSR_BASE+0x028) - -/* - * EEPROM and OTP (one-time-programmable) memory reads - * - * NOTE: Device must be awake, initialized via apm_ops.init(), - * in order to read. - */ -#define CSR_EEPROM_REG (CSR_BASE+0x02c) -#define CSR_EEPROM_GP (CSR_BASE+0x030) -#define CSR_OTP_GP_REG (CSR_BASE+0x034) - -#define CSR_GIO_REG (CSR_BASE+0x03C) -#define CSR_GP_UCODE_REG (CSR_BASE+0x048) -#define CSR_GP_DRIVER_REG (CSR_BASE+0x050) - -/* - * UCODE-DRIVER GP (general purpose) mailbox registers. - * SET/CLR registers set/clear bit(s) if "1" is written. - */ -#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054) -#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058) -#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c) -#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060) - -#define CSR_LED_REG (CSR_BASE+0x094) -#define CSR_DRAM_INT_TBL_REG (CSR_BASE+0x0A0) -#define CSR_MAC_SHADOW_REG_CTRL (CSR_BASE+0x0A8) /* 6000 and up */ - - -/* GIO Chicken Bits (PCI Express bus link power management) */ -#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100) - -/* Analog phase-lock-loop configuration */ -#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c) - -/* - * CSR Hardware Revision Workaround Register. Indicates hardware rev; - * "step" determines CCK backoff for txpower calculation. Used for 4965 only. - * See also CSR_HW_REV register. - * Bit fields: - * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step - * 1-0: "Dash" (-) value, as in C-1, etc. - */ -#define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) - -#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) -#define CSR_DBG_LINK_PWR_MGMT_REG (CSR_BASE+0x250) - -/* Bits for CSR_HW_IF_CONFIG_REG */ -#define CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x00000C00) -#define CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100) -#define CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200) - -#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) -#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) -#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */ -#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */ -#define CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */ - -#define CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/ -#define CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/ - -/* interrupt flags in INTA, set by uCode or hardware (e.g. dma), - * acknowledged (reset) by host writing "1" to flagged bits. */ -#define CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */ -#define CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */ -#define CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */ -#define CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */ -#define CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */ -#define CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */ -#define CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */ -#define CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */ -#define CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */ -#define CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */ -#define CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */ - -#define CSR_INI_SET_MASK (CSR_INT_BIT_FH_RX | \ - CSR_INT_BIT_HW_ERR | \ - CSR_INT_BIT_FH_TX | \ - CSR_INT_BIT_SW_ERR | \ - CSR_INT_BIT_RF_KILL | \ - CSR_INT_BIT_SW_RX | \ - CSR_INT_BIT_WAKEUP | \ - CSR_INT_BIT_ALIVE) - -/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */ -#define CSR_FH_INT_BIT_ERR (1 << 31) /* Error */ -#define CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */ -#define CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */ -#define CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */ -#define CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */ -#define CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */ - -#define CSR_FH_INT_RX_MASK (CSR_FH_INT_BIT_HI_PRIOR | \ - CSR_FH_INT_BIT_RX_CHNL1 | \ - CSR_FH_INT_BIT_RX_CHNL0) - -#define CSR_FH_INT_TX_MASK (CSR_FH_INT_BIT_TX_CHNL1 | \ - CSR_FH_INT_BIT_TX_CHNL0) - -/* GPIO */ -#define CSR_GPIO_IN_BIT_AUX_POWER (0x00000200) -#define CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000) -#define CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200) - -/* RESET */ -#define CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001) -#define CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002) -#define CSR_RESET_REG_FLAG_SW_RESET (0x00000080) -#define CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100) -#define CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200) -#define CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000) - -/* - * GP (general purpose) CONTROL REGISTER - * Bit fields: - * 27: HW_RF_KILL_SW - * Indicates state of (platform's) hardware RF-Kill switch - * 26-24: POWER_SAVE_TYPE - * Indicates current power-saving mode: - * 000 -- No power saving - * 001 -- MAC power-down - * 010 -- PHY (radio) power-down - * 011 -- Error - * 9-6: SYS_CONFIG - * Indicates current system configuration, reflecting pins on chip - * as forced high/low by device circuit board. - * 4: GOING_TO_SLEEP - * Indicates MAC is entering a power-saving sleep power-down. - * Not a good time to access device-internal resources. - * 3: MAC_ACCESS_REQ - * Host sets this to request and maintain MAC wakeup, to allow host - * access to device-internal resources. Host must wait for - * MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR - * device registers. - * 2: INIT_DONE - * Host sets this to put device into fully operational D0 power mode. - * Host resets this after SW_RESET to put device into low power mode. - * 0: MAC_CLOCK_READY - * Indicates MAC (ucode processor, etc.) is powered up and can run. - * Internal resources are accessible. - * NOTE: This does not indicate that the processor is actually running. - * NOTE: This does not indicate that device has completed - * init or post-power-down restore of internal SRAM memory. - * Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that - * SRAM is restored and uCode is in normal operation mode. - * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and - * do not need to save/restore it. - * NOTE: After device reset, this bit remains "0" until host sets - * INIT_DONE - */ -#define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001) -#define CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004) -#define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008) -#define CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010) - -#define CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001) - -#define CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000) -#define CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000) -#define CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000) - - -/* HW REV */ -#define CSR_HW_REV_TYPE_MSK (0x00001F0) -#define CSR_HW_REV_TYPE_5300 (0x0000020) -#define CSR_HW_REV_TYPE_5350 (0x0000030) -#define CSR_HW_REV_TYPE_5100 (0x0000050) -#define CSR_HW_REV_TYPE_5150 (0x0000040) -#define CSR_HW_REV_TYPE_1000 (0x0000060) -#define CSR_HW_REV_TYPE_6x00 (0x0000070) -#define CSR_HW_REV_TYPE_6x50 (0x0000080) -#define CSR_HW_REV_TYPE_6150 (0x0000084) -#define CSR_HW_REV_TYPE_6x05 (0x00000B0) -#define CSR_HW_REV_TYPE_6x30 CSR_HW_REV_TYPE_6x05 -#define CSR_HW_REV_TYPE_6x35 CSR_HW_REV_TYPE_6x05 -#define CSR_HW_REV_TYPE_2x30 (0x00000C0) -#define CSR_HW_REV_TYPE_2x00 (0x0000100) -#define CSR_HW_REV_TYPE_105 (0x0000110) -#define CSR_HW_REV_TYPE_135 (0x0000120) -#define CSR_HW_REV_TYPE_NONE (0x00001F0) - -/* EEPROM REG */ -#define CSR_EEPROM_REG_READ_VALID_MSK (0x00000001) -#define CSR_EEPROM_REG_BIT_CMD (0x00000002) -#define CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC) -#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) - -/* EEPROM GP */ -#define CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */ -#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) -#define CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP (0x00000000) -#define CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP (0x00000001) -#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002) -#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004) - -/* One-time-programmable memory general purpose reg */ -#define CSR_OTP_GP_REG_DEVICE_SELECT (0x00010000) /* 0 - EEPROM, 1 - OTP */ -#define CSR_OTP_GP_REG_OTP_ACCESS_MODE (0x00020000) /* 0 - absolute, 1 - relative */ -#define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK (0x00100000) /* bit 20 */ -#define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK (0x00200000) /* bit 21 */ - -/* GP REG */ -#define CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */ -#define CSR_GP_REG_NO_POWER_SAVE (0x00000000) -#define CSR_GP_REG_MAC_POWER_SAVE (0x01000000) -#define CSR_GP_REG_PHY_POWER_SAVE (0x02000000) -#define CSR_GP_REG_POWER_SAVE_ERROR (0x03000000) - - -/* CSR GIO */ -#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002) - -/* - * UCODE-DRIVER GP (general purpose) mailbox register 1 - * Host driver and uCode write and/or read this register to communicate with - * each other. - * Bit fields: - * 4: UCODE_DISABLE - * Host sets this to request permanent halt of uCode, same as - * sending CARD_STATE command with "halt" bit set. - * 3: CT_KILL_EXIT - * Host sets this to request exit from CT_KILL state, i.e. host thinks - * device temperature is low enough to continue normal operation. - * 2: CMD_BLOCKED - * Host sets this during RF KILL power-down sequence (HW, SW, CT KILL) - * to release uCode to clear all Tx and command queues, enter - * unassociated mode, and power down. - * NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit. - * 1: SW_BIT_RFKILL - * Host sets this when issuing CARD_STATE command to request - * device sleep. - * 0: MAC_SLEEP - * uCode sets this when preparing a power-saving power-down. - * uCode resets this when power-up is complete and SRAM is sane. - * NOTE: device saves internal SRAM data to host when powering down, - * and must restore this data after powering back up. - * MAC_SLEEP is the best indication that restore is complete. - * Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and - * do not need to save/restore it. - */ -#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001) -#define CSR_UCODE_SW_BIT_RFKILL (0x00000002) -#define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004) -#define CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008) -#define CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020) - -/* GP Driver */ -#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003) -#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000) -#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001) -#define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002) -#define CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6 (0x00000004) -#define CSR_GP_DRIVER_REG_BIT_6050_1x2 (0x00000008) - -#define CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER (0x00000080) - -/* GIO Chicken Bits (PCI Express bus link power management) */ -#define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000) -#define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000) - -/* LED */ -#define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) -#define CSR_LED_REG_TRUN_ON (0x78) -#define CSR_LED_REG_TRUN_OFF (0x38) - -/* ANA_PLL */ -#define CSR50_ANA_PLL_CFG_VAL (0x00880300) - -/* HPET MEM debug */ -#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) - -/* DRAM INT TABLE */ -#define CSR_DRAM_INT_TBL_ENABLE (1 << 31) -#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27) - -/* - * HBUS (Host-side Bus) - * - * HBUS registers are mapped directly into PCI bus space, but are used - * to indirectly access device's internal memory or registers that - * may be powered-down. - * - * Use iwl_write_direct32()/iwl_read_direct32() family for these registers; - * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ - * to make sure the MAC (uCode processor, etc.) is powered up for accessing - * internal resources. - * - * Do not use iwl_write32()/iwl_read32() family to access these registers; - * these provide only simple PCI bus access, without waking up the MAC. - */ -#define HBUS_BASE (0x400) - -/* - * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM - * structures, error log, event log, verifying uCode load). - * First write to address register, then read from or write to data register - * to complete the job. Once the address register is set up, accesses to - * data registers auto-increment the address by one dword. - * Bit usage for address registers (read or write): - * 0-31: memory address within device - */ -#define HBUS_TARG_MEM_RADDR (HBUS_BASE+0x00c) -#define HBUS_TARG_MEM_WADDR (HBUS_BASE+0x010) -#define HBUS_TARG_MEM_WDAT (HBUS_BASE+0x018) -#define HBUS_TARG_MEM_RDAT (HBUS_BASE+0x01c) - -/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */ -#define HBUS_TARG_MBX_C (HBUS_BASE+0x030) -#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004) - -/* - * Registers for accessing device's internal peripheral registers - * (e.g. SCD, BSM, etc.). First write to address register, - * then read from or write to data register to complete the job. - * Bit usage for address registers (read or write): - * 0-15: register address (offset) within device - * 24-25: (# bytes - 1) to read or write (e.g. 3 for dword) - */ -#define HBUS_TARG_PRPH_WADDR (HBUS_BASE+0x044) -#define HBUS_TARG_PRPH_RADDR (HBUS_BASE+0x048) -#define HBUS_TARG_PRPH_WDAT (HBUS_BASE+0x04c) -#define HBUS_TARG_PRPH_RDAT (HBUS_BASE+0x050) - -/* - * Per-Tx-queue write pointer (index, really!) - * Indicates index to next TFD that driver will fill (1 past latest filled). - * Bit usage: - * 0-7: queue write index - * 11-8: queue selector - */ -#define HBUS_TARG_WRPTR (HBUS_BASE+0x060) - -/********************************************************** - * CSR values - **********************************************************/ - /* - * host interrupt timeout value - * used with setting interrupt coalescing timer - * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit - * - * default interrupt coalescing timer is 64 x 32 = 2048 usecs - * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs - */ -#define IWL_HOST_INT_TIMEOUT_MAX (0xFF) -#define IWL_HOST_INT_TIMEOUT_DEF (0x40) -#define IWL_HOST_INT_TIMEOUT_MIN (0x0) -#define IWL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) -#define IWL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) -#define IWL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) - -#endif /* !__iwl_csr_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debug.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debug.c deleted file mode 100644 index 059efabd..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debug.c +++ /dev/null @@ -1,127 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ - -#include <linux/interrupt.h> -#include "iwl-debug.h" - -#define __iwl_fn(fn) \ -void __iwl_ ##fn(struct device *dev, const char *fmt, ...) \ -{ \ - struct va_format vaf = { \ - .fmt = fmt, \ - }; \ - va_list args; \ - \ - va_start(args, fmt); \ - vaf.va = &args; \ - dev_ ##fn(dev, "%pV", &vaf); \ - trace_iwlwifi_ ##fn(&vaf); \ - va_end(args); \ -} - -__iwl_fn(warn) -__iwl_fn(info) -__iwl_fn(crit) - -void __iwl_err(struct device *dev, bool rfkill_prefix, bool trace_only, - const char *fmt, ...) -{ - struct va_format vaf = { - .fmt = fmt, - }; - va_list args; - - va_start(args, fmt); - vaf.va = &args; - if (!trace_only) { - if (rfkill_prefix) - dev_err(dev, "(RFKILL) %pV", &vaf); - else - dev_err(dev, "%pV", &vaf); - } - trace_iwlwifi_err(&vaf); - va_end(args); -} - -#if defined(CONFIG_IWLWIFI_DEBUG) || defined(CONFIG_IWLWIFI_DEVICE_TRACING) -void __iwl_dbg(struct device *dev, - u32 level, bool limit, const char *function, - const char *fmt, ...) -{ - struct va_format vaf = { - .fmt = fmt, - }; - va_list args; - - va_start(args, fmt); - vaf.va = &args; -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(level) && - (!limit || net_ratelimit())) - dev_err(dev, "%c %s %pV", in_interrupt() ? 'I' : 'U', - function, &vaf); -#endif - trace_iwlwifi_dbg(level, in_interrupt(), function, &vaf); - va_end(args); -} -#endif diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debug.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debug.h deleted file mode 100644 index a6b32a11..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debug.h +++ /dev/null @@ -1,192 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_debug_h__ -#define __iwl_debug_h__ - -#include "iwl-shared.h" -#include "iwl-devtrace.h" - -struct iwl_priv; - -void __iwl_err(struct device *dev, bool rfkill_prefix, bool only_trace, - const char *fmt, ...); -void __iwl_warn(struct device *dev, const char *fmt, ...); -void __iwl_info(struct device *dev, const char *fmt, ...); -void __iwl_crit(struct device *dev, const char *fmt, ...); - -/* No matter what is m (priv, bus, trans), this will work */ -#define IWL_ERR(m, f, a...) __iwl_err(trans(m)->dev, false, false, f, ## a) -#define IWL_WARN(m, f, a...) __iwl_warn(trans(m)->dev, f, ## a) -#define IWL_INFO(m, f, a...) __iwl_info(trans(m)->dev, f, ## a) -#define IWL_CRIT(m, f, a...) __iwl_crit(trans(m)->dev, f, ## a) - -#if defined(CONFIG_IWLWIFI_DEBUG) || defined(CONFIG_IWLWIFI_DEVICE_TRACING) -void __iwl_dbg(struct device *dev, - u32 level, bool limit, const char *function, - const char *fmt, ...); -#else -static inline void -__iwl_dbg(struct device *dev, - u32 level, bool limit, const char *function, - const char *fmt, ...) -{} -#endif - -#define iwl_print_hex_error(m, p, len) \ -do { \ - print_hex_dump(KERN_ERR, "iwl data: ", \ - DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \ -} while (0) - -#define IWL_DEBUG(m, level, fmt, args...) \ - __iwl_dbg(trans(m)->dev, level, false, __func__, fmt, ##args) -#define IWL_DEBUG_LIMIT(m, level, fmt, args...) \ - __iwl_dbg(trans(m)->dev, level, true, __func__, fmt, ##args) - -#ifdef CONFIG_IWLWIFI_DEBUG -#define iwl_print_hex_dump(m, level, p, len) \ -do { \ - if (iwl_have_debug_level(level)) \ - print_hex_dump(KERN_DEBUG, "iwl data: ", \ - DUMP_PREFIX_OFFSET, 16, 1, p, len, 1); \ -} while (0) -#else -#define iwl_print_hex_dump(m, level, p, len) -#endif /* CONFIG_IWLWIFI_DEBUG */ - -#ifdef CONFIG_IWLWIFI_DEBUGFS -int iwl_dbgfs_register(struct iwl_priv *priv, const char *name); -void iwl_dbgfs_unregister(struct iwl_priv *priv); -#else -static inline int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) -{ - return 0; -} -static inline void iwl_dbgfs_unregister(struct iwl_priv *priv) -{ -} -#endif /* CONFIG_IWLWIFI_DEBUGFS */ - -/* - * To use the debug system: - * - * If you are defining a new debug classification, simply add it to the #define - * list here in the form of - * - * #define IWL_DL_xxxx VALUE - * - * where xxxx should be the name of the classification (for example, WEP). - * - * You then need to either add a IWL_xxxx_DEBUG() macro definition for your - * classification, or use IWL_DEBUG(IWL_DL_xxxx, ...) whenever you want - * to send output to that classification. - * - * The active debug levels can be accessed via files - * - * /sys/module/iwlwifi/parameters/debug - * when CONFIG_IWLWIFI_DEBUG=y. - * - * /sys/kernel/debug/phy0/iwlwifi/debug/debug_level - * when CONFIG_IWLWIFI_DEBUGFS=y. - * - */ - -/* 0x0000000F - 0x00000001 */ -#define IWL_DL_INFO 0x00000001 -#define IWL_DL_MAC80211 0x00000002 -#define IWL_DL_HCMD 0x00000004 -#define IWL_DL_STATE 0x00000008 -/* 0x000000F0 - 0x00000010 */ -#define IWL_DL_EEPROM 0x00000040 -#define IWL_DL_RADIO 0x00000080 -/* 0x00000F00 - 0x00000100 */ -#define IWL_DL_POWER 0x00000100 -#define IWL_DL_TEMP 0x00000200 -#define IWL_DL_SCAN 0x00000800 -/* 0x0000F000 - 0x00001000 */ -#define IWL_DL_ASSOC 0x00001000 -#define IWL_DL_DROP 0x00002000 -#define IWL_DL_COEX 0x00008000 -/* 0x000F0000 - 0x00010000 */ -#define IWL_DL_FW 0x00010000 -#define IWL_DL_RF_KILL 0x00020000 -#define IWL_DL_FW_ERRORS 0x00040000 -#define IWL_DL_LED 0x00080000 -/* 0x00F00000 - 0x00100000 */ -#define IWL_DL_RATE 0x00100000 -#define IWL_DL_CALIB 0x00200000 -#define IWL_DL_WEP 0x00400000 -#define IWL_DL_TX 0x00800000 -/* 0x0F000000 - 0x01000000 */ -#define IWL_DL_RX 0x01000000 -#define IWL_DL_ISR 0x02000000 -#define IWL_DL_HT 0x04000000 -/* 0xF0000000 - 0x10000000 */ -#define IWL_DL_11H 0x10000000 -#define IWL_DL_STATS 0x20000000 -#define IWL_DL_TX_REPLY 0x40000000 -#define IWL_DL_TX_QUEUES 0x80000000 - -#define IWL_DEBUG_INFO(p, f, a...) IWL_DEBUG(p, IWL_DL_INFO, f, ## a) -#define IWL_DEBUG_MAC80211(p, f, a...) IWL_DEBUG(p, IWL_DL_MAC80211, f, ## a) -#define IWL_DEBUG_TEMP(p, f, a...) IWL_DEBUG(p, IWL_DL_TEMP, f, ## a) -#define IWL_DEBUG_SCAN(p, f, a...) IWL_DEBUG(p, IWL_DL_SCAN, f, ## a) -#define IWL_DEBUG_RX(p, f, a...) IWL_DEBUG(p, IWL_DL_RX, f, ## a) -#define IWL_DEBUG_TX(p, f, a...) IWL_DEBUG(p, IWL_DL_TX, f, ## a) -#define IWL_DEBUG_ISR(p, f, a...) IWL_DEBUG(p, IWL_DL_ISR, f, ## a) -#define IWL_DEBUG_LED(p, f, a...) IWL_DEBUG(p, IWL_DL_LED, f, ## a) -#define IWL_DEBUG_WEP(p, f, a...) IWL_DEBUG(p, IWL_DL_WEP, f, ## a) -#define IWL_DEBUG_HC(p, f, a...) IWL_DEBUG(p, IWL_DL_HCMD, f, ## a) -#define IWL_DEBUG_EEPROM(p, f, a...) IWL_DEBUG(p, IWL_DL_EEPROM, f, ## a) -#define IWL_DEBUG_CALIB(p, f, a...) IWL_DEBUG(p, IWL_DL_CALIB, f, ## a) -#define IWL_DEBUG_FW(p, f, a...) IWL_DEBUG(p, IWL_DL_FW, f, ## a) -#define IWL_DEBUG_RF_KILL(p, f, a...) IWL_DEBUG(p, IWL_DL_RF_KILL, f, ## a) -#define IWL_DEBUG_FW_ERRORS(p, f, a...) IWL_DEBUG(p, IWL_DL_FW_ERRORS, f, ## a) -#define IWL_DEBUG_DROP(p, f, a...) IWL_DEBUG(p, IWL_DL_DROP, f, ## a) -#define IWL_DEBUG_DROP_LIMIT(p, f, a...) \ - IWL_DEBUG_LIMIT(p, IWL_DL_DROP, f, ## a) -#define IWL_DEBUG_COEX(p, f, a...) IWL_DEBUG(p, IWL_DL_COEX, f, ## a) -#define IWL_DEBUG_RATE(p, f, a...) IWL_DEBUG(p, IWL_DL_RATE, f, ## a) -#define IWL_DEBUG_RATE_LIMIT(p, f, a...) \ - IWL_DEBUG_LIMIT(p, IWL_DL_RATE, f, ## a) -#define IWL_DEBUG_ASSOC(p, f, a...) \ - IWL_DEBUG(p, IWL_DL_ASSOC | IWL_DL_INFO, f, ## a) -#define IWL_DEBUG_ASSOC_LIMIT(p, f, a...) \ - IWL_DEBUG_LIMIT(p, IWL_DL_ASSOC | IWL_DL_INFO, f, ## a) -#define IWL_DEBUG_HT(p, f, a...) IWL_DEBUG(p, IWL_DL_HT, f, ## a) -#define IWL_DEBUG_STATS(p, f, a...) IWL_DEBUG(p, IWL_DL_STATS, f, ## a) -#define IWL_DEBUG_STATS_LIMIT(p, f, a...) \ - IWL_DEBUG_LIMIT(p, IWL_DL_STATS, f, ## a) -#define IWL_DEBUG_TX_REPLY(p, f, a...) IWL_DEBUG(p, IWL_DL_TX_REPLY, f, ## a) -#define IWL_DEBUG_TX_QUEUES(p, f, a...) IWL_DEBUG(p, IWL_DL_TX_QUEUES, f, ## a) -#define IWL_DEBUG_RADIO(p, f, a...) IWL_DEBUG(p, IWL_DL_RADIO, f, ## a) -#define IWL_DEBUG_POWER(p, f, a...) IWL_DEBUG(p, IWL_DL_POWER, f, ## a) -#define IWL_DEBUG_11H(p, f, a...) IWL_DEBUG(p, IWL_DL_11H, f, ## a) - -#endif diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debugfs.c deleted file mode 100644 index 2bbaebd9..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ /dev/null @@ -1,2592 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/debugfs.h> - -#include <linux/ieee80211.h> -#include <net/mac80211.h> - - -#include "iwl-dev.h" -#include "iwl-debug.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" - -/* create and remove of files */ -#define DEBUGFS_ADD_FILE(name, parent, mode) do { \ - if (!debugfs_create_file(#name, mode, parent, priv, \ - &iwl_dbgfs_##name##_ops)) \ - goto err; \ -} while (0) - -#define DEBUGFS_ADD_BOOL(name, parent, ptr) do { \ - struct dentry *__tmp; \ - __tmp = debugfs_create_bool(#name, S_IWUSR | S_IRUSR, \ - parent, ptr); \ - if (IS_ERR(__tmp) || !__tmp) \ - goto err; \ -} while (0) - -#define DEBUGFS_ADD_X32(name, parent, ptr) do { \ - struct dentry *__tmp; \ - __tmp = debugfs_create_x32(#name, S_IWUSR | S_IRUSR, \ - parent, ptr); \ - if (IS_ERR(__tmp) || !__tmp) \ - goto err; \ -} while (0) - -#define DEBUGFS_ADD_U32(name, parent, ptr, mode) do { \ - struct dentry *__tmp; \ - __tmp = debugfs_create_u32(#name, mode, \ - parent, ptr); \ - if (IS_ERR(__tmp) || !__tmp) \ - goto err; \ -} while (0) - -/* file operation */ -#define DEBUGFS_READ_FUNC(name) \ -static ssize_t iwl_dbgfs_##name##_read(struct file *file, \ - char __user *user_buf, \ - size_t count, loff_t *ppos); - -#define DEBUGFS_WRITE_FUNC(name) \ -static ssize_t iwl_dbgfs_##name##_write(struct file *file, \ - const char __user *user_buf, \ - size_t count, loff_t *ppos); - - -#define DEBUGFS_READ_FILE_OPS(name) \ - DEBUGFS_READ_FUNC(name); \ -static const struct file_operations iwl_dbgfs_##name##_ops = { \ - .read = iwl_dbgfs_##name##_read, \ - .open = simple_open, \ - .llseek = generic_file_llseek, \ -}; - -#define DEBUGFS_WRITE_FILE_OPS(name) \ - DEBUGFS_WRITE_FUNC(name); \ -static const struct file_operations iwl_dbgfs_##name##_ops = { \ - .write = iwl_dbgfs_##name##_write, \ - .open = simple_open, \ - .llseek = generic_file_llseek, \ -}; - - -#define DEBUGFS_READ_WRITE_FILE_OPS(name) \ - DEBUGFS_READ_FUNC(name); \ - DEBUGFS_WRITE_FUNC(name); \ -static const struct file_operations iwl_dbgfs_##name##_ops = { \ - .write = iwl_dbgfs_##name##_write, \ - .read = iwl_dbgfs_##name##_read, \ - .open = simple_open, \ - .llseek = generic_file_llseek, \ -}; - -static ssize_t iwl_dbgfs_tx_statistics_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char *buf; - int pos = 0; - - int cnt; - ssize_t ret; - const size_t bufsz = 100 + - sizeof(char) * 50 * (MANAGEMENT_MAX + CONTROL_MAX); - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - pos += scnprintf(buf + pos, bufsz - pos, "Management:\n"); - for (cnt = 0; cnt < MANAGEMENT_MAX; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, - "\t%25s\t\t: %u\n", - get_mgmt_string(cnt), - priv->tx_stats.mgmt[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "Control\n"); - for (cnt = 0; cnt < CONTROL_MAX; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, - "\t%25s\t\t: %u\n", - get_ctrl_string(cnt), - priv->tx_stats.ctrl[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "Data:\n"); - pos += scnprintf(buf + pos, bufsz - pos, "\tcnt: %u\n", - priv->tx_stats.data_cnt); - pos += scnprintf(buf + pos, bufsz - pos, "\tbytes: %llu\n", - priv->tx_stats.data_bytes); - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_clear_traffic_statistics_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - u32 clear_flag; - char buf[8]; - int buf_size; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%x", &clear_flag) != 1) - return -EFAULT; - iwl_clear_traffic_stats(priv); - - return count; -} - -static ssize_t iwl_dbgfs_rx_statistics_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char *buf; - int pos = 0; - int cnt; - ssize_t ret; - const size_t bufsz = 100 + - sizeof(char) * 50 * (MANAGEMENT_MAX + CONTROL_MAX); - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - pos += scnprintf(buf + pos, bufsz - pos, "Management:\n"); - for (cnt = 0; cnt < MANAGEMENT_MAX; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, - "\t%25s\t\t: %u\n", - get_mgmt_string(cnt), - priv->rx_stats.mgmt[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "Control:\n"); - for (cnt = 0; cnt < CONTROL_MAX; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, - "\t%25s\t\t: %u\n", - get_ctrl_string(cnt), - priv->rx_stats.ctrl[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "Data:\n"); - pos += scnprintf(buf + pos, bufsz - pos, "\tcnt: %u\n", - priv->rx_stats.data_cnt); - pos += scnprintf(buf + pos, bufsz - pos, "\tbytes: %llu\n", - priv->rx_stats.data_bytes); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_sram_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - u32 val = 0; - char *buf; - ssize_t ret; - int i = 0; - bool device_format = false; - int offset = 0; - int len = 0; - int pos = 0; - int sram; - struct iwl_priv *priv = file->private_data; - const struct fw_img *img; - size_t bufsz; - - /* default is to dump the entire data segment */ - if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) { - priv->dbgfs_sram_offset = 0x800000; - if (!priv->ucode_loaded) { - IWL_ERR(priv, "No uCode has been loadded.\n"); - return -EINVAL; - } - img = &priv->fw->img[priv->shrd->ucode_type]; - priv->dbgfs_sram_len = img->sec[IWL_UCODE_SECTION_DATA].len; - } - len = priv->dbgfs_sram_len; - - if (len == -4) { - device_format = true; - len = 4; - } - - bufsz = 50 + len * 4; - buf = kmalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - pos += scnprintf(buf + pos, bufsz - pos, "sram_len: 0x%x\n", - len); - pos += scnprintf(buf + pos, bufsz - pos, "sram_offset: 0x%x\n", - priv->dbgfs_sram_offset); - - /* adjust sram address since reads are only on even u32 boundaries */ - offset = priv->dbgfs_sram_offset & 0x3; - sram = priv->dbgfs_sram_offset & ~0x3; - - /* read the first u32 from sram */ - val = iwl_read_targ_mem(trans(priv), sram); - - for (; len; len--) { - /* put the address at the start of every line */ - if (i == 0) - pos += scnprintf(buf + pos, bufsz - pos, - "%08X: ", sram + offset); - - if (device_format) - pos += scnprintf(buf + pos, bufsz - pos, - "%02x", (val >> (8 * (3 - offset))) & 0xff); - else - pos += scnprintf(buf + pos, bufsz - pos, - "%02x ", (val >> (8 * offset)) & 0xff); - - /* if all bytes processed, read the next u32 from sram */ - if (++offset == 4) { - sram += 4; - offset = 0; - val = iwl_read_targ_mem(trans(priv), sram); - } - - /* put in extra spaces and split lines for human readability */ - if (++i == 16) { - i = 0; - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - } else if (!(i & 7)) { - pos += scnprintf(buf + pos, bufsz - pos, " "); - } else if (!(i & 3)) { - pos += scnprintf(buf + pos, bufsz - pos, " "); - } - } - if (i) - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_sram_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[64]; - int buf_size; - u32 offset, len; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%x,%x", &offset, &len) == 2) { - priv->dbgfs_sram_offset = offset; - priv->dbgfs_sram_len = len; - } else if (sscanf(buf, "%x", &offset) == 1) { - priv->dbgfs_sram_offset = offset; - priv->dbgfs_sram_len = -4; - } else { - priv->dbgfs_sram_offset = 0; - priv->dbgfs_sram_len = 0; - } - - return count; -} - -static ssize_t iwl_dbgfs_wowlan_sram_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - const struct fw_img *img = &priv->fw->img[IWL_UCODE_WOWLAN]; - - if (!priv->wowlan_sram) - return -ENODATA; - - return simple_read_from_buffer(user_buf, count, ppos, - priv->wowlan_sram, - img->sec[IWL_UCODE_SECTION_DATA].len); -} -static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - struct iwl_station_entry *station; - struct iwl_tid_data *tid_data; - char *buf; - int i, j, pos = 0; - ssize_t ret; - /* Add 30 for initial string */ - const size_t bufsz = 30 + sizeof(char) * 500 * (priv->num_stations); - - buf = kmalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n", - priv->num_stations); - - for (i = 0; i < IWLAGN_STATION_COUNT; i++) { - station = &priv->stations[i]; - if (!station->used) - continue; - pos += scnprintf(buf + pos, bufsz - pos, - "station %d - addr: %pM, flags: %#x\n", - i, station->sta.sta.addr, - station->sta.station_flags_msk); - pos += scnprintf(buf + pos, bufsz - pos, - "TID\tseq_num\trate_n_flags\n"); - - for (j = 0; j < IWL_MAX_TID_COUNT; j++) { - tid_data = &priv->tid_data[i][j]; - pos += scnprintf(buf + pos, bufsz - pos, - "%d:\t%#x\t%#x", - j, tid_data->seq_number, - tid_data->agg.rate_n_flags); - - if (tid_data->agg.wait_for_ba) - pos += scnprintf(buf + pos, bufsz - pos, - " - waitforba"); - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - } - - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - } - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_nvm_read(struct file *file, - char __user *user_buf, - size_t count, - loff_t *ppos) -{ - ssize_t ret; - struct iwl_priv *priv = file->private_data; - int pos = 0, ofs = 0, buf_size = 0; - const u8 *ptr; - char *buf; - u16 eeprom_ver; - size_t eeprom_len = cfg(priv)->base_params->eeprom_size; - buf_size = 4 * eeprom_len + 256; - - if (eeprom_len % 16) { - IWL_ERR(priv, "NVM size is not multiple of 16.\n"); - return -ENODATA; - } - - ptr = priv->shrd->eeprom; - if (!ptr) { - IWL_ERR(priv, "Invalid EEPROM/OTP memory\n"); - return -ENOMEM; - } - - /* 4 characters for byte 0xYY */ - buf = kzalloc(buf_size, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - eeprom_ver = iwl_eeprom_query16(priv->shrd, EEPROM_VERSION); - pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s, " - "version: 0x%x\n", - (trans(priv)->nvm_device_type == NVM_DEVICE_TYPE_OTP) - ? "OTP" : "EEPROM", eeprom_ver); - for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) { - pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs); - hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos, - buf_size - pos, 0); - pos += strlen(buf + pos); - if (buf_size - pos > 0) - buf[pos++] = '\n'; - } - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - struct ieee80211_channel *channels = NULL; - const struct ieee80211_supported_band *supp_band = NULL; - int pos = 0, i, bufsz = PAGE_SIZE; - char *buf; - ssize_t ret; - - if (!test_bit(STATUS_GEO_CONFIGURED, &priv->status)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ); - if (supp_band) { - channels = supp_band->channels; - - pos += scnprintf(buf + pos, bufsz - pos, - "Displaying %d channels in 2.4GHz band 802.11bg):\n", - supp_band->n_channels); - - for (i = 0; i < supp_band->n_channels; i++) - pos += scnprintf(buf + pos, bufsz - pos, - "%d: %ddBm: BSS%s%s, %s.\n", - channels[i].hw_value, - channels[i].max_power, - channels[i].flags & IEEE80211_CHAN_RADAR ? - " (IEEE 802.11h required)" : "", - ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) - || (channels[i].flags & - IEEE80211_CHAN_RADAR)) ? "" : - ", IBSS", - channels[i].flags & - IEEE80211_CHAN_PASSIVE_SCAN ? - "passive only" : "active/passive"); - } - supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ); - if (supp_band) { - channels = supp_band->channels; - - pos += scnprintf(buf + pos, bufsz - pos, - "Displaying %d channels in 5.2GHz band (802.11a)\n", - supp_band->n_channels); - - for (i = 0; i < supp_band->n_channels; i++) - pos += scnprintf(buf + pos, bufsz - pos, - "%d: %ddBm: BSS%s%s, %s.\n", - channels[i].hw_value, - channels[i].max_power, - channels[i].flags & IEEE80211_CHAN_RADAR ? - " (IEEE 802.11h required)" : "", - ((channels[i].flags & IEEE80211_CHAN_NO_IBSS) - || (channels[i].flags & - IEEE80211_CHAN_RADAR)) ? "" : - ", IBSS", - channels[i].flags & - IEEE80211_CHAN_PASSIVE_SCAN ? - "passive only" : "active/passive"); - } - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_status_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char buf[512]; - int pos = 0; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_ACTIVE:\t %d\n", - test_bit(STATUS_HCMD_ACTIVE, &priv->shrd->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n", - test_bit(STATUS_RF_KILL_HW, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n", - test_bit(STATUS_CT_KILL, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n", - test_bit(STATUS_ALIVE, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n", - test_bit(STATUS_READY, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_GEO_CONFIGURED:\t %d\n", - test_bit(STATUS_GEO_CONFIGURED, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n", - test_bit(STATUS_EXIT_PENDING, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n", - test_bit(STATUS_STATISTICS, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n", - test_bit(STATUS_SCANNING, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n", - test_bit(STATUS_SCAN_ABORTING, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n", - test_bit(STATUS_SCAN_HW, &priv->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n", - test_bit(STATUS_POWER_PMI, &priv->shrd->status)); - pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n", - test_bit(STATUS_FW_ERROR, &priv->shrd->status)); - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_rx_handlers_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - - int pos = 0; - int cnt = 0; - char *buf; - int bufsz = 24 * 64; /* 24 items * 64 char per item */ - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - for (cnt = 0; cnt < REPLY_MAX; cnt++) { - if (priv->rx_handlers_stats[cnt] > 0) - pos += scnprintf(buf + pos, bufsz - pos, - "\tRx handler[%36s]:\t\t %u\n", - get_cmd_string(cnt), - priv->rx_handlers_stats[cnt]); - } - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_rx_handlers_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - - char buf[8]; - int buf_size; - u32 reset_flag; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%x", &reset_flag) != 1) - return -EFAULT; - if (reset_flag == 0) - memset(&priv->rx_handlers_stats[0], 0, - sizeof(priv->rx_handlers_stats)); - - return count; -} - -static ssize_t iwl_dbgfs_qos_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - struct iwl_rxon_context *ctx; - int pos = 0, i; - char buf[256 * NUM_IWL_RXON_CTX]; - const size_t bufsz = sizeof(buf); - - for_each_context(priv, ctx) { - pos += scnprintf(buf + pos, bufsz - pos, "context %d:\n", - ctx->ctxid); - for (i = 0; i < AC_NUM; i++) { - pos += scnprintf(buf + pos, bufsz - pos, - "\tcw_min\tcw_max\taifsn\ttxop\n"); - pos += scnprintf(buf + pos, bufsz - pos, - "AC[%d]\t%u\t%u\t%u\t%u\n", i, - ctx->qos_data.def_qos_parm.ac[i].cw_min, - ctx->qos_data.def_qos_parm.ac[i].cw_max, - ctx->qos_data.def_qos_parm.ac[i].aifsn, - ctx->qos_data.def_qos_parm.ac[i].edca_txop); - } - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - } - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - struct iwl_tt_mgmt *tt = &priv->thermal_throttle; - struct iwl_tt_restriction *restriction; - char buf[100]; - int pos = 0; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, - "Thermal Throttling Mode: %s\n", - tt->advanced_tt ? "Advance" : "Legacy"); - pos += scnprintf(buf + pos, bufsz - pos, - "Thermal Throttling State: %d\n", - tt->state); - if (tt->advanced_tt) { - restriction = tt->restriction + tt->state; - pos += scnprintf(buf + pos, bufsz - pos, - "Tx mode: %d\n", - restriction->tx_stream); - pos += scnprintf(buf + pos, bufsz - pos, - "Rx mode: %d\n", - restriction->rx_stream); - pos += scnprintf(buf + pos, bufsz - pos, - "HT mode: %d\n", - restriction->is_ht); - } - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_disable_ht40_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int ht40; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &ht40) != 1) - return -EFAULT; - if (!iwl_is_any_associated(priv)) - priv->disable_ht40 = ht40 ? true : false; - else { - IWL_ERR(priv, "Sta associated with AP - " - "Change to 40MHz channel support is not allowed\n"); - return -EINVAL; - } - - return count; -} - -static ssize_t iwl_dbgfs_disable_ht40_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[100]; - int pos = 0; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, - "11n 40MHz Mode: %s\n", - priv->disable_ht40 ? "Disabled" : "Enabled"); - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_temperature_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int pos = 0; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, "%d\n", priv->temperature); - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - - -static ssize_t iwl_dbgfs_sleep_level_override_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int value; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - if (sscanf(buf, "%d", &value) != 1) - return -EINVAL; - - /* - * Our users expect 0 to be "CAM", but 0 isn't actually - * valid here. However, let's not confuse them and present - * IWL_POWER_INDEX_1 as "1", not "0". - */ - if (value == 0) - return -EINVAL; - else if (value > 0) - value -= 1; - - if (value != -1 && (value < 0 || value >= IWL_POWER_NUM)) - return -EINVAL; - - if (!iwl_is_ready_rf(priv)) - return -EAGAIN; - - priv->power_data.debug_sleep_level_override = value; - - mutex_lock(&priv->mutex); - iwl_power_update_mode(priv, true); - mutex_unlock(&priv->mutex); - - return count; -} - -static ssize_t iwl_dbgfs_sleep_level_override_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[10]; - int pos, value; - const size_t bufsz = sizeof(buf); - - /* see the write function */ - value = priv->power_data.debug_sleep_level_override; - if (value >= 0) - value += 1; - - pos = scnprintf(buf, bufsz, "%d\n", value); - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_current_sleep_command_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[200]; - int pos = 0, i; - const size_t bufsz = sizeof(buf); - struct iwl_powertable_cmd *cmd = &priv->power_data.sleep_cmd; - - pos += scnprintf(buf + pos, bufsz - pos, - "flags: %#.2x\n", le16_to_cpu(cmd->flags)); - pos += scnprintf(buf + pos, bufsz - pos, - "RX/TX timeout: %d/%d usec\n", - le32_to_cpu(cmd->rx_data_timeout), - le32_to_cpu(cmd->tx_data_timeout)); - for (i = 0; i < IWL_POWER_VEC_SIZE; i++) - pos += scnprintf(buf + pos, bufsz - pos, - "sleep_interval[%d]: %d\n", i, - le32_to_cpu(cmd->sleep_interval[i])); - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -DEBUGFS_READ_WRITE_FILE_OPS(sram); -DEBUGFS_READ_FILE_OPS(wowlan_sram); -DEBUGFS_READ_FILE_OPS(nvm); -DEBUGFS_READ_FILE_OPS(stations); -DEBUGFS_READ_FILE_OPS(channels); -DEBUGFS_READ_FILE_OPS(status); -DEBUGFS_READ_WRITE_FILE_OPS(rx_handlers); -DEBUGFS_READ_FILE_OPS(qos); -DEBUGFS_READ_FILE_OPS(thermal_throttling); -DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40); -DEBUGFS_READ_FILE_OPS(temperature); -DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override); -DEBUGFS_READ_FILE_OPS(current_sleep_command); - -static ssize_t iwl_dbgfs_traffic_log_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0, ofs = 0; - int cnt = 0, entry; - - char *buf; - int bufsz = ((IWL_TRAFFIC_ENTRIES * IWL_TRAFFIC_ENTRY_SIZE * 64) * 2) + - (cfg(priv)->base_params->num_of_queues * 32 * 8) + 400; - const u8 *ptr; - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate buffer\n"); - return -ENOMEM; - } - if (priv->tx_traffic && iwl_have_debug_level(IWL_DL_TX)) { - ptr = priv->tx_traffic; - pos += scnprintf(buf + pos, bufsz - pos, - "Tx Traffic idx: %u\n", priv->tx_traffic_idx); - for (cnt = 0, ofs = 0; cnt < IWL_TRAFFIC_ENTRIES; cnt++) { - for (entry = 0; entry < IWL_TRAFFIC_ENTRY_SIZE / 16; - entry++, ofs += 16) { - pos += scnprintf(buf + pos, bufsz - pos, - "0x%.4x ", ofs); - hex_dump_to_buffer(ptr + ofs, 16, 16, 2, - buf + pos, bufsz - pos, 0); - pos += strlen(buf + pos); - if (bufsz - pos > 0) - buf[pos++] = '\n'; - } - } - } - - if (priv->rx_traffic && iwl_have_debug_level(IWL_DL_RX)) { - ptr = priv->rx_traffic; - pos += scnprintf(buf + pos, bufsz - pos, - "Rx Traffic idx: %u\n", priv->rx_traffic_idx); - for (cnt = 0, ofs = 0; cnt < IWL_TRAFFIC_ENTRIES; cnt++) { - for (entry = 0; entry < IWL_TRAFFIC_ENTRY_SIZE / 16; - entry++, ofs += 16) { - pos += scnprintf(buf + pos, bufsz - pos, - "0x%.4x ", ofs); - hex_dump_to_buffer(ptr + ofs, 16, 16, 2, - buf + pos, bufsz - pos, 0); - pos += strlen(buf + pos); - if (bufsz - pos > 0) - buf[pos++] = '\n'; - } - } - } - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_traffic_log_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int traffic_log; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &traffic_log) != 1) - return -EFAULT; - if (traffic_log == 0) - iwl_reset_traffic_log(priv); - - return count; -} - -static const char *fmt_value = " %-30s %10u\n"; -static const char *fmt_hex = " %-30s 0x%02X\n"; -static const char *fmt_table = " %-30s %10u %10u %10u %10u\n"; -static const char *fmt_header = - "%-32s current cumulative delta max\n"; - -static int iwl_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz) -{ - int p = 0; - u32 flag; - - lockdep_assert_held(&priv->statistics.lock); - - flag = le32_to_cpu(priv->statistics.flag); - - p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n", flag); - if (flag & UCODE_STATISTICS_CLEAR_MSK) - p += scnprintf(buf + p, bufsz - p, - "\tStatistics have been cleared\n"); - p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n", - (flag & UCODE_STATISTICS_FREQUENCY_MSK) - ? "2.4 GHz" : "5.2 GHz"); - p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n", - (flag & UCODE_STATISTICS_NARROW_BAND_MSK) - ? "enabled" : "disabled"); - - return p; -} - -static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0; - char *buf; - int bufsz = sizeof(struct statistics_rx_phy) * 40 + - sizeof(struct statistics_rx_non_phy) * 40 + - sizeof(struct statistics_rx_ht_phy) * 40 + 400; - ssize_t ret; - struct statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm; - struct statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck; - struct statistics_rx_non_phy *general, *accum_general; - struct statistics_rx_non_phy *delta_general, *max_general; - struct statistics_rx_ht_phy *ht, *accum_ht, *delta_ht, *max_ht; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* - * the statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - spin_lock_bh(&priv->statistics.lock); - ofdm = &priv->statistics.rx_ofdm; - cck = &priv->statistics.rx_cck; - general = &priv->statistics.rx_non_phy; - ht = &priv->statistics.rx_ofdm_ht; - accum_ofdm = &priv->accum_stats.rx_ofdm; - accum_cck = &priv->accum_stats.rx_cck; - accum_general = &priv->accum_stats.rx_non_phy; - accum_ht = &priv->accum_stats.rx_ofdm_ht; - delta_ofdm = &priv->delta_stats.rx_ofdm; - delta_cck = &priv->delta_stats.rx_cck; - delta_general = &priv->delta_stats.rx_non_phy; - delta_ht = &priv->delta_stats.rx_ofdm_ht; - max_ofdm = &priv->max_delta_stats.rx_ofdm; - max_cck = &priv->max_delta_stats.rx_cck; - max_general = &priv->max_delta_stats.rx_non_phy; - max_ht = &priv->max_delta_stats.rx_ofdm_ht; - - pos += iwl_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_header, "Statistics_Rx - OFDM:"); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "ina_cnt:", - le32_to_cpu(ofdm->ina_cnt), - accum_ofdm->ina_cnt, - delta_ofdm->ina_cnt, max_ofdm->ina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "fina_cnt:", - le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt, - delta_ofdm->fina_cnt, max_ofdm->fina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "plcp_err:", - le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err, - delta_ofdm->plcp_err, max_ofdm->plcp_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "crc32_err:", - le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err, - delta_ofdm->crc32_err, max_ofdm->crc32_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "overrun_err:", - le32_to_cpu(ofdm->overrun_err), - accum_ofdm->overrun_err, delta_ofdm->overrun_err, - max_ofdm->overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "early_overrun_err:", - le32_to_cpu(ofdm->early_overrun_err), - accum_ofdm->early_overrun_err, - delta_ofdm->early_overrun_err, - max_ofdm->early_overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "crc32_good:", - le32_to_cpu(ofdm->crc32_good), - accum_ofdm->crc32_good, delta_ofdm->crc32_good, - max_ofdm->crc32_good); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "false_alarm_cnt:", - le32_to_cpu(ofdm->false_alarm_cnt), - accum_ofdm->false_alarm_cnt, - delta_ofdm->false_alarm_cnt, - max_ofdm->false_alarm_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "fina_sync_err_cnt:", - le32_to_cpu(ofdm->fina_sync_err_cnt), - accum_ofdm->fina_sync_err_cnt, - delta_ofdm->fina_sync_err_cnt, - max_ofdm->fina_sync_err_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sfd_timeout:", - le32_to_cpu(ofdm->sfd_timeout), - accum_ofdm->sfd_timeout, delta_ofdm->sfd_timeout, - max_ofdm->sfd_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "fina_timeout:", - le32_to_cpu(ofdm->fina_timeout), - accum_ofdm->fina_timeout, delta_ofdm->fina_timeout, - max_ofdm->fina_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "unresponded_rts:", - le32_to_cpu(ofdm->unresponded_rts), - accum_ofdm->unresponded_rts, - delta_ofdm->unresponded_rts, - max_ofdm->unresponded_rts); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "rxe_frame_lmt_ovrun:", - le32_to_cpu(ofdm->rxe_frame_limit_overrun), - accum_ofdm->rxe_frame_limit_overrun, - delta_ofdm->rxe_frame_limit_overrun, - max_ofdm->rxe_frame_limit_overrun); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sent_ack_cnt:", - le32_to_cpu(ofdm->sent_ack_cnt), - accum_ofdm->sent_ack_cnt, delta_ofdm->sent_ack_cnt, - max_ofdm->sent_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sent_cts_cnt:", - le32_to_cpu(ofdm->sent_cts_cnt), - accum_ofdm->sent_cts_cnt, delta_ofdm->sent_cts_cnt, - max_ofdm->sent_cts_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sent_ba_rsp_cnt:", - le32_to_cpu(ofdm->sent_ba_rsp_cnt), - accum_ofdm->sent_ba_rsp_cnt, - delta_ofdm->sent_ba_rsp_cnt, - max_ofdm->sent_ba_rsp_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "dsp_self_kill:", - le32_to_cpu(ofdm->dsp_self_kill), - accum_ofdm->dsp_self_kill, - delta_ofdm->dsp_self_kill, - max_ofdm->dsp_self_kill); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "mh_format_err:", - le32_to_cpu(ofdm->mh_format_err), - accum_ofdm->mh_format_err, - delta_ofdm->mh_format_err, - max_ofdm->mh_format_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "re_acq_main_rssi_sum:", - le32_to_cpu(ofdm->re_acq_main_rssi_sum), - accum_ofdm->re_acq_main_rssi_sum, - delta_ofdm->re_acq_main_rssi_sum, - max_ofdm->re_acq_main_rssi_sum); - - pos += scnprintf(buf + pos, bufsz - pos, - fmt_header, "Statistics_Rx - CCK:"); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "ina_cnt:", - le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt, - delta_cck->ina_cnt, max_cck->ina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "fina_cnt:", - le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt, - delta_cck->fina_cnt, max_cck->fina_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "plcp_err:", - le32_to_cpu(cck->plcp_err), accum_cck->plcp_err, - delta_cck->plcp_err, max_cck->plcp_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "crc32_err:", - le32_to_cpu(cck->crc32_err), accum_cck->crc32_err, - delta_cck->crc32_err, max_cck->crc32_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "overrun_err:", - le32_to_cpu(cck->overrun_err), - accum_cck->overrun_err, delta_cck->overrun_err, - max_cck->overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "early_overrun_err:", - le32_to_cpu(cck->early_overrun_err), - accum_cck->early_overrun_err, - delta_cck->early_overrun_err, - max_cck->early_overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "crc32_good:", - le32_to_cpu(cck->crc32_good), accum_cck->crc32_good, - delta_cck->crc32_good, max_cck->crc32_good); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "false_alarm_cnt:", - le32_to_cpu(cck->false_alarm_cnt), - accum_cck->false_alarm_cnt, - delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "fina_sync_err_cnt:", - le32_to_cpu(cck->fina_sync_err_cnt), - accum_cck->fina_sync_err_cnt, - delta_cck->fina_sync_err_cnt, - max_cck->fina_sync_err_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sfd_timeout:", - le32_to_cpu(cck->sfd_timeout), - accum_cck->sfd_timeout, delta_cck->sfd_timeout, - max_cck->sfd_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "fina_timeout:", - le32_to_cpu(cck->fina_timeout), - accum_cck->fina_timeout, delta_cck->fina_timeout, - max_cck->fina_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "unresponded_rts:", - le32_to_cpu(cck->unresponded_rts), - accum_cck->unresponded_rts, delta_cck->unresponded_rts, - max_cck->unresponded_rts); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "rxe_frame_lmt_ovrun:", - le32_to_cpu(cck->rxe_frame_limit_overrun), - accum_cck->rxe_frame_limit_overrun, - delta_cck->rxe_frame_limit_overrun, - max_cck->rxe_frame_limit_overrun); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sent_ack_cnt:", - le32_to_cpu(cck->sent_ack_cnt), - accum_cck->sent_ack_cnt, delta_cck->sent_ack_cnt, - max_cck->sent_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sent_cts_cnt:", - le32_to_cpu(cck->sent_cts_cnt), - accum_cck->sent_cts_cnt, delta_cck->sent_cts_cnt, - max_cck->sent_cts_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sent_ba_rsp_cnt:", - le32_to_cpu(cck->sent_ba_rsp_cnt), - accum_cck->sent_ba_rsp_cnt, - delta_cck->sent_ba_rsp_cnt, - max_cck->sent_ba_rsp_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "dsp_self_kill:", - le32_to_cpu(cck->dsp_self_kill), - accum_cck->dsp_self_kill, delta_cck->dsp_self_kill, - max_cck->dsp_self_kill); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "mh_format_err:", - le32_to_cpu(cck->mh_format_err), - accum_cck->mh_format_err, delta_cck->mh_format_err, - max_cck->mh_format_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "re_acq_main_rssi_sum:", - le32_to_cpu(cck->re_acq_main_rssi_sum), - accum_cck->re_acq_main_rssi_sum, - delta_cck->re_acq_main_rssi_sum, - max_cck->re_acq_main_rssi_sum); - - pos += scnprintf(buf + pos, bufsz - pos, - fmt_header, "Statistics_Rx - GENERAL:"); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "bogus_cts:", - le32_to_cpu(general->bogus_cts), - accum_general->bogus_cts, delta_general->bogus_cts, - max_general->bogus_cts); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "bogus_ack:", - le32_to_cpu(general->bogus_ack), - accum_general->bogus_ack, delta_general->bogus_ack, - max_general->bogus_ack); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "non_bssid_frames:", - le32_to_cpu(general->non_bssid_frames), - accum_general->non_bssid_frames, - delta_general->non_bssid_frames, - max_general->non_bssid_frames); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "filtered_frames:", - le32_to_cpu(general->filtered_frames), - accum_general->filtered_frames, - delta_general->filtered_frames, - max_general->filtered_frames); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "non_channel_beacons:", - le32_to_cpu(general->non_channel_beacons), - accum_general->non_channel_beacons, - delta_general->non_channel_beacons, - max_general->non_channel_beacons); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "channel_beacons:", - le32_to_cpu(general->channel_beacons), - accum_general->channel_beacons, - delta_general->channel_beacons, - max_general->channel_beacons); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "num_missed_bcon:", - le32_to_cpu(general->num_missed_bcon), - accum_general->num_missed_bcon, - delta_general->num_missed_bcon, - max_general->num_missed_bcon); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "adc_rx_saturation_time:", - le32_to_cpu(general->adc_rx_saturation_time), - accum_general->adc_rx_saturation_time, - delta_general->adc_rx_saturation_time, - max_general->adc_rx_saturation_time); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "ina_detect_search_tm:", - le32_to_cpu(general->ina_detection_search_time), - accum_general->ina_detection_search_time, - delta_general->ina_detection_search_time, - max_general->ina_detection_search_time); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_silence_rssi_a:", - le32_to_cpu(general->beacon_silence_rssi_a), - accum_general->beacon_silence_rssi_a, - delta_general->beacon_silence_rssi_a, - max_general->beacon_silence_rssi_a); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_silence_rssi_b:", - le32_to_cpu(general->beacon_silence_rssi_b), - accum_general->beacon_silence_rssi_b, - delta_general->beacon_silence_rssi_b, - max_general->beacon_silence_rssi_b); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_silence_rssi_c:", - le32_to_cpu(general->beacon_silence_rssi_c), - accum_general->beacon_silence_rssi_c, - delta_general->beacon_silence_rssi_c, - max_general->beacon_silence_rssi_c); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "interference_data_flag:", - le32_to_cpu(general->interference_data_flag), - accum_general->interference_data_flag, - delta_general->interference_data_flag, - max_general->interference_data_flag); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "channel_load:", - le32_to_cpu(general->channel_load), - accum_general->channel_load, - delta_general->channel_load, - max_general->channel_load); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "dsp_false_alarms:", - le32_to_cpu(general->dsp_false_alarms), - accum_general->dsp_false_alarms, - delta_general->dsp_false_alarms, - max_general->dsp_false_alarms); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_rssi_a:", - le32_to_cpu(general->beacon_rssi_a), - accum_general->beacon_rssi_a, - delta_general->beacon_rssi_a, - max_general->beacon_rssi_a); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_rssi_b:", - le32_to_cpu(general->beacon_rssi_b), - accum_general->beacon_rssi_b, - delta_general->beacon_rssi_b, - max_general->beacon_rssi_b); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_rssi_c:", - le32_to_cpu(general->beacon_rssi_c), - accum_general->beacon_rssi_c, - delta_general->beacon_rssi_c, - max_general->beacon_rssi_c); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_energy_a:", - le32_to_cpu(general->beacon_energy_a), - accum_general->beacon_energy_a, - delta_general->beacon_energy_a, - max_general->beacon_energy_a); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_energy_b:", - le32_to_cpu(general->beacon_energy_b), - accum_general->beacon_energy_b, - delta_general->beacon_energy_b, - max_general->beacon_energy_b); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "beacon_energy_c:", - le32_to_cpu(general->beacon_energy_c), - accum_general->beacon_energy_c, - delta_general->beacon_energy_c, - max_general->beacon_energy_c); - - pos += scnprintf(buf + pos, bufsz - pos, - fmt_header, "Statistics_Rx - OFDM_HT:"); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "plcp_err:", - le32_to_cpu(ht->plcp_err), accum_ht->plcp_err, - delta_ht->plcp_err, max_ht->plcp_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "overrun_err:", - le32_to_cpu(ht->overrun_err), accum_ht->overrun_err, - delta_ht->overrun_err, max_ht->overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "early_overrun_err:", - le32_to_cpu(ht->early_overrun_err), - accum_ht->early_overrun_err, - delta_ht->early_overrun_err, - max_ht->early_overrun_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "crc32_good:", - le32_to_cpu(ht->crc32_good), accum_ht->crc32_good, - delta_ht->crc32_good, max_ht->crc32_good); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "crc32_err:", - le32_to_cpu(ht->crc32_err), accum_ht->crc32_err, - delta_ht->crc32_err, max_ht->crc32_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "mh_format_err:", - le32_to_cpu(ht->mh_format_err), - accum_ht->mh_format_err, - delta_ht->mh_format_err, max_ht->mh_format_err); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg_crc32_good:", - le32_to_cpu(ht->agg_crc32_good), - accum_ht->agg_crc32_good, - delta_ht->agg_crc32_good, max_ht->agg_crc32_good); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg_mpdu_cnt:", - le32_to_cpu(ht->agg_mpdu_cnt), - accum_ht->agg_mpdu_cnt, - delta_ht->agg_mpdu_cnt, max_ht->agg_mpdu_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg_cnt:", - le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt, - delta_ht->agg_cnt, max_ht->agg_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "unsupport_mcs:", - le32_to_cpu(ht->unsupport_mcs), - accum_ht->unsupport_mcs, - delta_ht->unsupport_mcs, max_ht->unsupport_mcs); - - spin_unlock_bh(&priv->statistics.lock); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0; - char *buf; - int bufsz = (sizeof(struct statistics_tx) * 48) + 250; - ssize_t ret; - struct statistics_tx *tx, *accum_tx, *delta_tx, *max_tx; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* the statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - spin_lock_bh(&priv->statistics.lock); - - tx = &priv->statistics.tx; - accum_tx = &priv->accum_stats.tx; - delta_tx = &priv->delta_stats.tx; - max_tx = &priv->max_delta_stats.tx; - - pos += iwl_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_header, "Statistics_Tx:"); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "preamble:", - le32_to_cpu(tx->preamble_cnt), - accum_tx->preamble_cnt, - delta_tx->preamble_cnt, max_tx->preamble_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "rx_detected_cnt:", - le32_to_cpu(tx->rx_detected_cnt), - accum_tx->rx_detected_cnt, - delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "bt_prio_defer_cnt:", - le32_to_cpu(tx->bt_prio_defer_cnt), - accum_tx->bt_prio_defer_cnt, - delta_tx->bt_prio_defer_cnt, - max_tx->bt_prio_defer_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "bt_prio_kill_cnt:", - le32_to_cpu(tx->bt_prio_kill_cnt), - accum_tx->bt_prio_kill_cnt, - delta_tx->bt_prio_kill_cnt, - max_tx->bt_prio_kill_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "few_bytes_cnt:", - le32_to_cpu(tx->few_bytes_cnt), - accum_tx->few_bytes_cnt, - delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "cts_timeout:", - le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout, - delta_tx->cts_timeout, max_tx->cts_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "ack_timeout:", - le32_to_cpu(tx->ack_timeout), - accum_tx->ack_timeout, - delta_tx->ack_timeout, max_tx->ack_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "expected_ack_cnt:", - le32_to_cpu(tx->expected_ack_cnt), - accum_tx->expected_ack_cnt, - delta_tx->expected_ack_cnt, - max_tx->expected_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "actual_ack_cnt:", - le32_to_cpu(tx->actual_ack_cnt), - accum_tx->actual_ack_cnt, - delta_tx->actual_ack_cnt, - max_tx->actual_ack_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "dump_msdu_cnt:", - le32_to_cpu(tx->dump_msdu_cnt), - accum_tx->dump_msdu_cnt, - delta_tx->dump_msdu_cnt, - max_tx->dump_msdu_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "abort_nxt_frame_mismatch:", - le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt), - accum_tx->burst_abort_next_frame_mismatch_cnt, - delta_tx->burst_abort_next_frame_mismatch_cnt, - max_tx->burst_abort_next_frame_mismatch_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "abort_missing_nxt_frame:", - le32_to_cpu(tx->burst_abort_missing_next_frame_cnt), - accum_tx->burst_abort_missing_next_frame_cnt, - delta_tx->burst_abort_missing_next_frame_cnt, - max_tx->burst_abort_missing_next_frame_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "cts_timeout_collision:", - le32_to_cpu(tx->cts_timeout_collision), - accum_tx->cts_timeout_collision, - delta_tx->cts_timeout_collision, - max_tx->cts_timeout_collision); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "ack_ba_timeout_collision:", - le32_to_cpu(tx->ack_or_ba_timeout_collision), - accum_tx->ack_or_ba_timeout_collision, - delta_tx->ack_or_ba_timeout_collision, - max_tx->ack_or_ba_timeout_collision); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg ba_timeout:", - le32_to_cpu(tx->agg.ba_timeout), - accum_tx->agg.ba_timeout, - delta_tx->agg.ba_timeout, - max_tx->agg.ba_timeout); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg ba_resched_frames:", - le32_to_cpu(tx->agg.ba_reschedule_frames), - accum_tx->agg.ba_reschedule_frames, - delta_tx->agg.ba_reschedule_frames, - max_tx->agg.ba_reschedule_frames); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg scd_query_agg_frame:", - le32_to_cpu(tx->agg.scd_query_agg_frame_cnt), - accum_tx->agg.scd_query_agg_frame_cnt, - delta_tx->agg.scd_query_agg_frame_cnt, - max_tx->agg.scd_query_agg_frame_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg scd_query_no_agg:", - le32_to_cpu(tx->agg.scd_query_no_agg), - accum_tx->agg.scd_query_no_agg, - delta_tx->agg.scd_query_no_agg, - max_tx->agg.scd_query_no_agg); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg scd_query_agg:", - le32_to_cpu(tx->agg.scd_query_agg), - accum_tx->agg.scd_query_agg, - delta_tx->agg.scd_query_agg, - max_tx->agg.scd_query_agg); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg scd_query_mismatch:", - le32_to_cpu(tx->agg.scd_query_mismatch), - accum_tx->agg.scd_query_mismatch, - delta_tx->agg.scd_query_mismatch, - max_tx->agg.scd_query_mismatch); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg frame_not_ready:", - le32_to_cpu(tx->agg.frame_not_ready), - accum_tx->agg.frame_not_ready, - delta_tx->agg.frame_not_ready, - max_tx->agg.frame_not_ready); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg underrun:", - le32_to_cpu(tx->agg.underrun), - accum_tx->agg.underrun, - delta_tx->agg.underrun, max_tx->agg.underrun); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg bt_prio_kill:", - le32_to_cpu(tx->agg.bt_prio_kill), - accum_tx->agg.bt_prio_kill, - delta_tx->agg.bt_prio_kill, - max_tx->agg.bt_prio_kill); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "agg rx_ba_rsp_cnt:", - le32_to_cpu(tx->agg.rx_ba_rsp_cnt), - accum_tx->agg.rx_ba_rsp_cnt, - delta_tx->agg.rx_ba_rsp_cnt, - max_tx->agg.rx_ba_rsp_cnt); - - if (tx->tx_power.ant_a || tx->tx_power.ant_b || tx->tx_power.ant_c) { - pos += scnprintf(buf + pos, bufsz - pos, - "tx power: (1/2 dB step)\n"); - if ((hw_params(priv).valid_tx_ant & ANT_A) && - tx->tx_power.ant_a) - pos += scnprintf(buf + pos, bufsz - pos, - fmt_hex, "antenna A:", - tx->tx_power.ant_a); - if ((hw_params(priv).valid_tx_ant & ANT_B) && - tx->tx_power.ant_b) - pos += scnprintf(buf + pos, bufsz - pos, - fmt_hex, "antenna B:", - tx->tx_power.ant_b); - if ((hw_params(priv).valid_tx_ant & ANT_C) && - tx->tx_power.ant_c) - pos += scnprintf(buf + pos, bufsz - pos, - fmt_hex, "antenna C:", - tx->tx_power.ant_c); - } - - spin_unlock_bh(&priv->statistics.lock); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int pos = 0; - char *buf; - int bufsz = sizeof(struct statistics_general) * 10 + 300; - ssize_t ret; - struct statistics_general_common *general, *accum_general; - struct statistics_general_common *delta_general, *max_general; - struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg; - struct statistics_div *div, *accum_div, *delta_div, *max_div; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* the statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - - spin_lock_bh(&priv->statistics.lock); - - general = &priv->statistics.common; - dbg = &priv->statistics.common.dbg; - div = &priv->statistics.common.div; - accum_general = &priv->accum_stats.common; - accum_dbg = &priv->accum_stats.common.dbg; - accum_div = &priv->accum_stats.common.div; - delta_general = &priv->delta_stats.common; - max_general = &priv->max_delta_stats.common; - delta_dbg = &priv->delta_stats.common.dbg; - max_dbg = &priv->max_delta_stats.common.dbg; - delta_div = &priv->delta_stats.common.div; - max_div = &priv->max_delta_stats.common.div; - - pos += iwl_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_header, "Statistics_General:"); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_value, "temperature:", - le32_to_cpu(general->temperature)); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_value, "temperature_m:", - le32_to_cpu(general->temperature_m)); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_value, "ttl_timestamp:", - le32_to_cpu(general->ttl_timestamp)); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "burst_check:", - le32_to_cpu(dbg->burst_check), - accum_dbg->burst_check, - delta_dbg->burst_check, max_dbg->burst_check); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "burst_count:", - le32_to_cpu(dbg->burst_count), - accum_dbg->burst_count, - delta_dbg->burst_count, max_dbg->burst_count); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "wait_for_silence_timeout_count:", - le32_to_cpu(dbg->wait_for_silence_timeout_cnt), - accum_dbg->wait_for_silence_timeout_cnt, - delta_dbg->wait_for_silence_timeout_cnt, - max_dbg->wait_for_silence_timeout_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "sleep_time:", - le32_to_cpu(general->sleep_time), - accum_general->sleep_time, - delta_general->sleep_time, max_general->sleep_time); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "slots_out:", - le32_to_cpu(general->slots_out), - accum_general->slots_out, - delta_general->slots_out, max_general->slots_out); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "slots_idle:", - le32_to_cpu(general->slots_idle), - accum_general->slots_idle, - delta_general->slots_idle, max_general->slots_idle); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "tx_on_a:", - le32_to_cpu(div->tx_on_a), accum_div->tx_on_a, - delta_div->tx_on_a, max_div->tx_on_a); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "tx_on_b:", - le32_to_cpu(div->tx_on_b), accum_div->tx_on_b, - delta_div->tx_on_b, max_div->tx_on_b); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "exec_time:", - le32_to_cpu(div->exec_time), accum_div->exec_time, - delta_div->exec_time, max_div->exec_time); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "probe_time:", - le32_to_cpu(div->probe_time), accum_div->probe_time, - delta_div->probe_time, max_div->probe_time); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "rx_enable_counter:", - le32_to_cpu(general->rx_enable_counter), - accum_general->rx_enable_counter, - delta_general->rx_enable_counter, - max_general->rx_enable_counter); - pos += scnprintf(buf + pos, bufsz - pos, - fmt_table, "num_of_sos_states:", - le32_to_cpu(general->num_of_sos_states), - accum_general->num_of_sos_states, - delta_general->num_of_sos_states, - max_general->num_of_sos_states); - - spin_unlock_bh(&priv->statistics.lock); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_ucode_bt_stats_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = (struct iwl_priv *)file->private_data; - int pos = 0; - char *buf; - int bufsz = (sizeof(struct statistics_bt_activity) * 24) + 200; - ssize_t ret; - struct statistics_bt_activity *bt, *accum_bt; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - if (!priv->bt_enable_flag) - return -EINVAL; - - /* make request to uCode to retrieve statistics information */ - mutex_lock(&priv->mutex); - ret = iwl_send_statistics_request(priv, CMD_SYNC, false); - mutex_unlock(&priv->mutex); - - if (ret) { - IWL_ERR(priv, - "Error sending statistics request: %zd\n", ret); - return -EAGAIN; - } - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - /* - * the statistic information display here is based on - * the last statistics notification from uCode - * might not reflect the current uCode activity - */ - - spin_lock_bh(&priv->statistics.lock); - - bt = &priv->statistics.bt_activity; - accum_bt = &priv->accum_stats.bt_activity; - - pos += iwl_statistics_flag(priv, buf, bufsz); - pos += scnprintf(buf + pos, bufsz - pos, "Statistics_BT:\n"); - pos += scnprintf(buf + pos, bufsz - pos, - "\t\t\tcurrent\t\t\taccumulative\n"); - pos += scnprintf(buf + pos, bufsz - pos, - "hi_priority_tx_req_cnt:\t\t%u\t\t\t%u\n", - le32_to_cpu(bt->hi_priority_tx_req_cnt), - accum_bt->hi_priority_tx_req_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "hi_priority_tx_denied_cnt:\t%u\t\t\t%u\n", - le32_to_cpu(bt->hi_priority_tx_denied_cnt), - accum_bt->hi_priority_tx_denied_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "lo_priority_tx_req_cnt:\t\t%u\t\t\t%u\n", - le32_to_cpu(bt->lo_priority_tx_req_cnt), - accum_bt->lo_priority_tx_req_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n", - le32_to_cpu(bt->lo_priority_tx_denied_cnt), - accum_bt->lo_priority_tx_denied_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "hi_priority_rx_req_cnt:\t\t%u\t\t\t%u\n", - le32_to_cpu(bt->hi_priority_rx_req_cnt), - accum_bt->hi_priority_rx_req_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "hi_priority_rx_denied_cnt:\t%u\t\t\t%u\n", - le32_to_cpu(bt->hi_priority_rx_denied_cnt), - accum_bt->hi_priority_rx_denied_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "lo_priority_rx_req_cnt:\t\t%u\t\t\t%u\n", - le32_to_cpu(bt->lo_priority_rx_req_cnt), - accum_bt->lo_priority_rx_req_cnt); - pos += scnprintf(buf + pos, bufsz - pos, - "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n", - le32_to_cpu(bt->lo_priority_rx_denied_cnt), - accum_bt->lo_priority_rx_denied_cnt); - - pos += scnprintf(buf + pos, bufsz - pos, - "(rx)num_bt_kills:\t\t%u\t\t\t%u\n", - le32_to_cpu(priv->statistics.num_bt_kills), - priv->statistics.accum_num_bt_kills); - - spin_unlock_bh(&priv->statistics.lock); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_reply_tx_error_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = (struct iwl_priv *)file->private_data; - int pos = 0; - char *buf; - int bufsz = (sizeof(struct reply_tx_error_statistics) * 24) + - (sizeof(struct reply_agg_tx_error_statistics) * 24) + 200; - ssize_t ret; - - if (!iwl_is_alive(priv)) - return -EAGAIN; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - pos += scnprintf(buf + pos, bufsz - pos, "Statistics_TX_Error:\n"); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_DELAY), - priv->reply_tx_stats.pp_delay); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_FEW_BYTES), - priv->reply_tx_stats.pp_few_bytes); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_BT_PRIO), - priv->reply_tx_stats.pp_bt_prio); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_QUIET_PERIOD), - priv->reply_tx_stats.pp_quiet_period); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_CALC_TTAK), - priv->reply_tx_stats.pp_calc_ttak); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_tx_fail_reason( - TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY), - priv->reply_tx_stats.int_crossed_retry); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_SHORT_LIMIT), - priv->reply_tx_stats.short_limit); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_LONG_LIMIT), - priv->reply_tx_stats.long_limit); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_UNDERRUN), - priv->reply_tx_stats.fifo_underrun); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_DRAIN_FLOW), - priv->reply_tx_stats.drain_flow); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_RFKILL_FLUSH), - priv->reply_tx_stats.rfkill_flush); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_LIFE_EXPIRE), - priv->reply_tx_stats.life_expire); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_DEST_PS), - priv->reply_tx_stats.dest_ps); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_HOST_ABORTED), - priv->reply_tx_stats.host_abort); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_BT_RETRY), - priv->reply_tx_stats.pp_delay); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_STA_INVALID), - priv->reply_tx_stats.sta_invalid); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_FRAG_DROPPED), - priv->reply_tx_stats.frag_drop); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_TID_DISABLE), - priv->reply_tx_stats.tid_disable); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_FLUSHED), - priv->reply_tx_stats.fifo_flush); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_tx_fail_reason( - TX_STATUS_FAIL_INSUFFICIENT_CF_POLL), - priv->reply_tx_stats.insuff_cf_poll); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_tx_fail_reason(TX_STATUS_FAIL_PASSIVE_NO_RX), - priv->reply_tx_stats.fail_hw_drop); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_tx_fail_reason( - TX_STATUS_FAIL_NO_BEACON_ON_RADAR), - priv->reply_tx_stats.sta_color_mismatch); - pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n", - priv->reply_tx_stats.unknown); - - pos += scnprintf(buf + pos, bufsz - pos, - "\nStatistics_Agg_TX_Error:\n"); - - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_UNDERRUN_MSK), - priv->reply_agg_tx_stats.underrun); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_BT_PRIO_MSK), - priv->reply_agg_tx_stats.bt_prio); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_FEW_BYTES_MSK), - priv->reply_agg_tx_stats.few_bytes); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_ABORT_MSK), - priv->reply_agg_tx_stats.abort); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_agg_tx_fail_reason( - AGG_TX_STATE_LAST_SENT_TTL_MSK), - priv->reply_agg_tx_stats.last_sent_ttl); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_agg_tx_fail_reason( - AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK), - priv->reply_agg_tx_stats.last_sent_try); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_agg_tx_fail_reason( - AGG_TX_STATE_LAST_SENT_BT_KILL_MSK), - priv->reply_agg_tx_stats.last_sent_bt_kill); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_SCD_QUERY_MSK), - priv->reply_agg_tx_stats.scd_query); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n", - iwl_get_agg_tx_fail_reason( - AGG_TX_STATE_TEST_BAD_CRC32_MSK), - priv->reply_agg_tx_stats.bad_crc32); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_RESPONSE_MSK), - priv->reply_agg_tx_stats.response); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DUMP_TX_MSK), - priv->reply_agg_tx_stats.dump_tx); - pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n", - iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DELAY_TX_MSK), - priv->reply_agg_tx_stats.delay_tx); - pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n", - priv->reply_agg_tx_stats.unknown); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_sensitivity_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int pos = 0; - int cnt = 0; - char *buf; - int bufsz = sizeof(struct iwl_sensitivity_data) * 4 + 100; - ssize_t ret; - struct iwl_sensitivity_data *data; - - data = &priv->sensitivity_data; - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm:\t\t\t %u\n", - data->auto_corr_ofdm); - pos += scnprintf(buf + pos, bufsz - pos, - "auto_corr_ofdm_mrc:\t\t %u\n", - data->auto_corr_ofdm_mrc); - pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm_x1:\t\t %u\n", - data->auto_corr_ofdm_x1); - pos += scnprintf(buf + pos, bufsz - pos, - "auto_corr_ofdm_mrc_x1:\t\t %u\n", - data->auto_corr_ofdm_mrc_x1); - pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck:\t\t\t %u\n", - data->auto_corr_cck); - pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck_mrc:\t\t %u\n", - data->auto_corr_cck_mrc); - pos += scnprintf(buf + pos, bufsz - pos, - "last_bad_plcp_cnt_ofdm:\t\t %u\n", - data->last_bad_plcp_cnt_ofdm); - pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_ofdm:\t\t %u\n", - data->last_fa_cnt_ofdm); - pos += scnprintf(buf + pos, bufsz - pos, - "last_bad_plcp_cnt_cck:\t\t %u\n", - data->last_bad_plcp_cnt_cck); - pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_cck:\t\t %u\n", - data->last_fa_cnt_cck); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_curr_state:\t\t\t %u\n", - data->nrg_curr_state); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_prev_state:\t\t\t %u\n", - data->nrg_prev_state); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_value:\t\t\t"); - for (cnt = 0; cnt < 10; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, " %u", - data->nrg_value[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_rssi:\t\t"); - for (cnt = 0; cnt < NRG_NUM_PREV_STAT_L; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, " %u", - data->nrg_silence_rssi[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_ref:\t\t %u\n", - data->nrg_silence_ref); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_energy_idx:\t\t\t %u\n", - data->nrg_energy_idx); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_idx:\t\t %u\n", - data->nrg_silence_idx); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_cck:\t\t\t %u\n", - data->nrg_th_cck); - pos += scnprintf(buf + pos, bufsz - pos, - "nrg_auto_corr_silence_diff:\t %u\n", - data->nrg_auto_corr_silence_diff); - pos += scnprintf(buf + pos, bufsz - pos, "num_in_cck_no_fa:\t\t %u\n", - data->num_in_cck_no_fa); - pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_ofdm:\t\t\t %u\n", - data->nrg_th_ofdm); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - - -static ssize_t iwl_dbgfs_chain_noise_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int pos = 0; - int cnt = 0; - char *buf; - int bufsz = sizeof(struct iwl_chain_noise_data) * 4 + 100; - ssize_t ret; - struct iwl_chain_noise_data *data; - - data = &priv->chain_noise_data; - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(priv, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - pos += scnprintf(buf + pos, bufsz - pos, "active_chains:\t\t\t %u\n", - data->active_chains); - pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_a:\t\t\t %u\n", - data->chain_noise_a); - pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_b:\t\t\t %u\n", - data->chain_noise_b); - pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_c:\t\t\t %u\n", - data->chain_noise_c); - pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_a:\t\t\t %u\n", - data->chain_signal_a); - pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_b:\t\t\t %u\n", - data->chain_signal_b); - pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_c:\t\t\t %u\n", - data->chain_signal_c); - pos += scnprintf(buf + pos, bufsz - pos, "beacon_count:\t\t\t %u\n", - data->beacon_count); - - pos += scnprintf(buf + pos, bufsz - pos, "disconn_array:\t\t\t"); - for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, " %u", - data->disconn_array[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - pos += scnprintf(buf + pos, bufsz - pos, "delta_gain_code:\t\t"); - for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) { - pos += scnprintf(buf + pos, bufsz - pos, " %u", - data->delta_gain_code[cnt]); - } - pos += scnprintf(buf + pos, bufsz - pos, "\n"); - pos += scnprintf(buf + pos, bufsz - pos, "radio_write:\t\t\t %u\n", - data->radio_write); - pos += scnprintf(buf + pos, bufsz - pos, "state:\t\t\t\t %u\n", - data->state); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_power_save_status_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[60]; - int pos = 0; - const size_t bufsz = sizeof(buf); - u32 pwrsave_status; - - pwrsave_status = iwl_read32(trans(priv), CSR_GP_CNTRL) & - CSR_GP_REG_POWER_SAVE_STATUS_MSK; - - pos += scnprintf(buf + pos, bufsz - pos, "Power Save Status: "); - pos += scnprintf(buf + pos, bufsz - pos, "%s\n", - (pwrsave_status == CSR_GP_REG_NO_POWER_SAVE) ? "none" : - (pwrsave_status == CSR_GP_REG_MAC_POWER_SAVE) ? "MAC" : - (pwrsave_status == CSR_GP_REG_PHY_POWER_SAVE) ? "PHY" : - "error"); - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_clear_ucode_statistics_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int clear; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &clear) != 1) - return -EFAULT; - - /* make request to uCode to retrieve statistics information */ - mutex_lock(&priv->mutex); - iwl_send_statistics_request(priv, CMD_SYNC, true); - mutex_unlock(&priv->mutex); - - return count; -} - -static ssize_t iwl_dbgfs_ucode_tracing_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int pos = 0; - char buf[128]; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, "ucode trace timer is %s\n", - priv->event_log.ucode_trace ? "On" : "Off"); - pos += scnprintf(buf + pos, bufsz - pos, "non_wraps_count:\t\t %u\n", - priv->event_log.non_wraps_count); - pos += scnprintf(buf + pos, bufsz - pos, "wraps_once_count:\t\t %u\n", - priv->event_log.wraps_once_count); - pos += scnprintf(buf + pos, bufsz - pos, "wraps_more_count:\t\t %u\n", - priv->event_log.wraps_more_count); - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_ucode_tracing_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int trace; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &trace) != 1) - return -EFAULT; - - if (trace) { - priv->event_log.ucode_trace = true; - if (iwl_is_alive(priv)) { - /* start collecting data now */ - mod_timer(&priv->ucode_trace, jiffies); - } - } else { - priv->event_log.ucode_trace = false; - del_timer_sync(&priv->ucode_trace); - } - - return count; -} - -static ssize_t iwl_dbgfs_rxon_flags_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int len = 0; - char buf[20]; - - len = sprintf(buf, "0x%04X\n", - le32_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.flags)); - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t iwl_dbgfs_rxon_filter_flags_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int len = 0; - char buf[20]; - - len = sprintf(buf, "0x%04X\n", - le32_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.filter_flags)); - return simple_read_from_buffer(user_buf, count, ppos, buf, len); -} - -static ssize_t iwl_dbgfs_missed_beacon_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int pos = 0; - char buf[12]; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, "%d\n", - priv->missed_beacon_threshold); - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_missed_beacon_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int missed; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &missed) != 1) - return -EINVAL; - - if (missed < IWL_MISSED_BEACON_THRESHOLD_MIN || - missed > IWL_MISSED_BEACON_THRESHOLD_MAX) - priv->missed_beacon_threshold = - IWL_MISSED_BEACON_THRESHOLD_DEF; - else - priv->missed_beacon_threshold = missed; - - return count; -} - -static ssize_t iwl_dbgfs_plcp_delta_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - int pos = 0; - char buf[12]; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, "%u\n", - priv->plcp_delta_threshold); - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_plcp_delta_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int plcp; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &plcp) != 1) - return -EINVAL; - if ((plcp < IWL_MAX_PLCP_ERR_THRESHOLD_MIN) || - (plcp > IWL_MAX_PLCP_ERR_THRESHOLD_MAX)) - priv->plcp_delta_threshold = - IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE; - else - priv->plcp_delta_threshold = plcp; - return count; -} - -static ssize_t iwl_dbgfs_force_reset_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - int i, pos = 0; - char buf[300]; - const size_t bufsz = sizeof(buf); - struct iwl_force_reset *force_reset; - - for (i = 0; i < IWL_MAX_FORCE_RESET; i++) { - force_reset = &priv->force_reset[i]; - pos += scnprintf(buf + pos, bufsz - pos, - "Force reset method %d\n", i); - pos += scnprintf(buf + pos, bufsz - pos, - "\tnumber of reset request: %d\n", - force_reset->reset_request_count); - pos += scnprintf(buf + pos, bufsz - pos, - "\tnumber of reset request success: %d\n", - force_reset->reset_success_count); - pos += scnprintf(buf + pos, bufsz - pos, - "\tnumber of reset request reject: %d\n", - force_reset->reset_reject_count); - pos += scnprintf(buf + pos, bufsz - pos, - "\treset duration: %lu\n", - force_reset->reset_duration); - } - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_force_reset_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int reset, ret; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &reset) != 1) - return -EINVAL; - switch (reset) { - case IWL_RF_RESET: - case IWL_FW_RESET: - ret = iwl_force_reset(priv, reset, true); - break; - default: - return -EINVAL; - } - return ret ? ret : count; -} - -static ssize_t iwl_dbgfs_txfifo_flush_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int flush; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &flush) != 1) - return -EINVAL; - - if (iwl_is_rfkill(priv)) - return -EFAULT; - - iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL); - - return count; -} - -static ssize_t iwl_dbgfs_wd_timeout_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int timeout; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &timeout) != 1) - return -EINVAL; - if (timeout < 0 || timeout > IWL_MAX_WD_TIMEOUT) - timeout = IWL_DEF_WD_TIMEOUT; - - hw_params(priv).wd_timeout = timeout; - iwl_setup_watchdog(priv); - return count; -} - -static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = (struct iwl_priv *)file->private_data; - int pos = 0; - char buf[200]; - const size_t bufsz = sizeof(buf); - - if (!priv->bt_enable_flag) { - pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n"); - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); - } - pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n", - priv->bt_enable_flag); - pos += scnprintf(buf + pos, bufsz - pos, "BT in %s mode\n", - priv->bt_full_concurrent ? "full concurrency" : "3-wire"); - pos += scnprintf(buf + pos, bufsz - pos, "BT status: %s, " - "last traffic notif: %d\n", - priv->bt_status ? "On" : "Off", priv->last_bt_traffic_load); - pos += scnprintf(buf + pos, bufsz - pos, "ch_announcement: %d, " - "kill_ack_mask: %x, kill_cts_mask: %x\n", - priv->bt_ch_announce, priv->kill_ack_mask, - priv->kill_cts_mask); - - pos += scnprintf(buf + pos, bufsz - pos, "bluetooth traffic load: "); - switch (priv->bt_traffic_load) { - case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: - pos += scnprintf(buf + pos, bufsz - pos, "Continuous\n"); - break; - case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: - pos += scnprintf(buf + pos, bufsz - pos, "High\n"); - break; - case IWL_BT_COEX_TRAFFIC_LOAD_LOW: - pos += scnprintf(buf + pos, bufsz - pos, "Low\n"); - break; - case IWL_BT_COEX_TRAFFIC_LOAD_NONE: - default: - pos += scnprintf(buf + pos, bufsz - pos, "None\n"); - break; - } - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_protection_mode_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = (struct iwl_priv *)file->private_data; - - int pos = 0; - char buf[40]; - const size_t bufsz = sizeof(buf); - - if (cfg(priv)->ht_params) - pos += scnprintf(buf + pos, bufsz - pos, - "use %s for aggregation\n", - (hw_params(priv).use_rts_for_aggregation) ? - "rts/cts" : "cts-to-self"); - else - pos += scnprintf(buf + pos, bufsz - pos, "N/A"); - - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -static ssize_t iwl_dbgfs_protection_mode_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - int rts; - - if (!cfg(priv)->ht_params) - return -EINVAL; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &rts) != 1) - return -EINVAL; - if (rts) - hw_params(priv).use_rts_for_aggregation = true; - else - hw_params(priv).use_rts_for_aggregation = false; - return count; -} - -static ssize_t iwl_dbgfs_echo_test_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_priv *priv = file->private_data; - char buf[8]; - int buf_size; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - iwl_cmd_echo_test(priv); - return count; -} - -DEBUGFS_READ_FILE_OPS(rx_statistics); -DEBUGFS_READ_FILE_OPS(tx_statistics); -DEBUGFS_READ_WRITE_FILE_OPS(traffic_log); -DEBUGFS_READ_FILE_OPS(ucode_rx_stats); -DEBUGFS_READ_FILE_OPS(ucode_tx_stats); -DEBUGFS_READ_FILE_OPS(ucode_general_stats); -DEBUGFS_READ_FILE_OPS(sensitivity); -DEBUGFS_READ_FILE_OPS(chain_noise); -DEBUGFS_READ_FILE_OPS(power_save_status); -DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics); -DEBUGFS_WRITE_FILE_OPS(clear_traffic_statistics); -DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing); -DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon); -DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta); -DEBUGFS_READ_WRITE_FILE_OPS(force_reset); -DEBUGFS_READ_FILE_OPS(rxon_flags); -DEBUGFS_READ_FILE_OPS(rxon_filter_flags); -DEBUGFS_WRITE_FILE_OPS(txfifo_flush); -DEBUGFS_READ_FILE_OPS(ucode_bt_stats); -DEBUGFS_WRITE_FILE_OPS(wd_timeout); -DEBUGFS_READ_FILE_OPS(bt_traffic); -DEBUGFS_READ_WRITE_FILE_OPS(protection_mode); -DEBUGFS_READ_FILE_OPS(reply_tx_error); -DEBUGFS_WRITE_FILE_OPS(echo_test); - -/* - * Create the debugfs files and directories - * - */ -int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) -{ - struct dentry *phyd = priv->hw->wiphy->debugfsdir; - struct dentry *dir_drv, *dir_data, *dir_rf, *dir_debug; - - dir_drv = debugfs_create_dir(name, phyd); - if (!dir_drv) - return -ENOMEM; - - priv->debugfs_dir = dir_drv; - - dir_data = debugfs_create_dir("data", dir_drv); - if (!dir_data) - goto err; - dir_rf = debugfs_create_dir("rf", dir_drv); - if (!dir_rf) - goto err; - dir_debug = debugfs_create_dir("debug", dir_drv); - if (!dir_debug) - goto err; - - DEBUGFS_ADD_FILE(nvm, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(sram, dir_data, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(wowlan_sram, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(stations, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(channels, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(status, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(rx_handlers, dir_data, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(qos, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(sleep_level_override, dir_data, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(current_sleep_command, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(thermal_throttling, dir_data, S_IRUSR); - DEBUGFS_ADD_FILE(disable_ht40, dir_data, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(temperature, dir_data, S_IRUSR); - - DEBUGFS_ADD_FILE(rx_statistics, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(tx_statistics, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(traffic_log, dir_debug, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(power_save_status, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(clear_ucode_statistics, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(clear_traffic_statistics, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(missed_beacon, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(plcp_delta, dir_debug, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(force_reset, dir_debug, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(ucode_rx_stats, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(ucode_general_stats, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(txfifo_flush, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(protection_mode, dir_debug, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(ucode_tracing, dir_debug, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(ucode_bt_stats, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(reply_tx_error, dir_debug, S_IRUSR); - DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(wd_timeout, dir_debug, S_IWUSR); - DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR); - if (iwl_advanced_bt_coexist(priv)) - DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR); - - DEBUGFS_ADD_BOOL(disable_sensitivity, dir_rf, - &priv->disable_sens_cal); - DEBUGFS_ADD_BOOL(disable_chain_noise, dir_rf, - &priv->disable_chain_noise_cal); - - if (iwl_trans_dbgfs_register(trans(priv), dir_debug)) - goto err; - return 0; - -err: - IWL_ERR(priv, "Can't create the debugfs directory\n"); - iwl_dbgfs_unregister(priv); - return -ENOMEM; -} - -/** - * Remove the debugfs files and directories - * - */ -void iwl_dbgfs_unregister(struct iwl_priv *priv) -{ - if (!priv->debugfs_dir) - return; - - debugfs_remove_recursive(priv->debugfs_dir); - priv->debugfs_dir = NULL; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-dev.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-dev.h deleted file mode 100644 index 16956b77..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-dev.h +++ /dev/null @@ -1,1055 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -/* - * Please use this file (iwl-dev.h) for driver implementation definitions. - * Please use iwl-commands.h for uCode API definitions. - */ - -#ifndef __iwl_dev_h__ -#define __iwl_dev_h__ - -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/wait.h> -#include <linux/leds.h> -#include <linux/slab.h> -#include <linux/mutex.h> - -#include "iwl-eeprom.h" -#include "iwl-csr.h" -#include "iwl-debug.h" -#include "iwl-agn-hw.h" -#include "iwl-led.h" -#include "iwl-power.h" -#include "iwl-agn-rs.h" -#include "iwl-agn-tt.h" -#include "iwl-trans.h" -#include "iwl-shared.h" -#include "iwl-op-mode.h" -#include "iwl-notif-wait.h" - -struct iwl_tx_queue; - -/* CT-KILL constants */ -#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ -#define CT_KILL_THRESHOLD 114 /* in Celsius */ -#define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */ - -/* Default noise level to report when noise measurement is not available. - * This may be because we're: - * 1) Not associated no beacon statistics being sent to driver) - * 2) Scanning (noise measurement does not apply to associated channel) - * Use default noise value of -127 ... this is below the range of measurable - * Rx dBm for all agn devices, so it can indicate "unmeasurable" to user. - * Also, -127 works better than 0 when averaging frames with/without - * noise info (e.g. averaging might be done in app); measured dBm values are - * always negative ... using a negative value as the default keeps all - * averages within an s8's (used in some apps) range of negative values. */ -#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) - -/* - * RTS threshold here is total size [2347] minus 4 FCS bytes - * Per spec: - * a value of 0 means RTS on all data/management packets - * a value > max MSDU size means no RTS - * else RTS for data/management frames where MPDU is larger - * than RTS value. - */ -#define DEFAULT_RTS_THRESHOLD 2347U -#define MIN_RTS_THRESHOLD 0U -#define MAX_RTS_THRESHOLD 2347U -#define MAX_MSDU_SIZE 2304U -#define MAX_MPDU_SIZE 2346U -#define DEFAULT_BEACON_INTERVAL 200U -#define DEFAULT_SHORT_RETRY_LIMIT 7U -#define DEFAULT_LONG_RETRY_LIMIT 4U - -#define IWL_NUM_SCAN_RATES (2) - -/* - * One for each channel, holds all channel setup data - * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant - * with one another! - */ -struct iwl_channel_info { - struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ - struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for - * HT40 channel */ - - u8 channel; /* channel number */ - u8 flags; /* flags copied from EEPROM */ - s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ - s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ - s8 min_power; /* always 0 */ - s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ - - u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ - u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ - enum ieee80211_band band; - - /* HT40 channel info */ - s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ - u8 ht40_flags; /* flags copied from EEPROM */ - u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ -}; - -/* - * Minimum number of queues. MAX_NUM is defined in hw specific files. - * Set the minimum to accommodate - * - 4 standard TX queues - * - the command queue - * - 4 PAN TX queues - * - the PAN multicast queue, and - * - the AUX (TX during scan dwell) queue. - */ -#define IWL_MIN_NUM_QUEUES 11 - -/* - * Command queue depends on iPAN support. - */ -#define IWL_DEFAULT_CMD_QUEUE_NUM 4 -#define IWL_IPAN_CMD_QUEUE_NUM 9 - -#define IEEE80211_DATA_LEN 2304 -#define IEEE80211_4ADDR_LEN 30 -#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) - -#define SUP_RATE_11A_MAX_NUM_CHANNELS 8 -#define SUP_RATE_11B_MAX_NUM_CHANNELS 4 -#define SUP_RATE_11G_MAX_NUM_CHANNELS 12 - -#define IWL_SUPPORTED_RATES_IE_LEN 8 - -#define IWL_INVALID_RATE 0xFF -#define IWL_INVALID_VALUE -1 - -union iwl_ht_rate_supp { - u16 rates; - struct { - u8 siso_rate; - u8 mimo_rate; - }; -}; - -#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0) -#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1) -#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2) -#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3) -#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K -#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K -#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K - -/* - * Maximal MPDU density for TX aggregation - * 4 - 2us density - * 5 - 4us density - * 6 - 8us density - * 7 - 16us density - */ -#define CFG_HT_MPDU_DENSITY_2USEC (0x4) -#define CFG_HT_MPDU_DENSITY_4USEC (0x5) -#define CFG_HT_MPDU_DENSITY_8USEC (0x6) -#define CFG_HT_MPDU_DENSITY_16USEC (0x7) -#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC -#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC -#define CFG_HT_MPDU_DENSITY_MIN (0x1) - -struct iwl_ht_config { - bool single_chain_sufficient; - enum ieee80211_smps_mode smps; /* current smps mode */ -}; - -/* QoS structures */ -struct iwl_qos_info { - int qos_active; - struct iwl_qosparam_cmd def_qos_parm; -}; - -/** - * enum iwl_agg_state - * - * The state machine of the BA agreement establishment / tear down. - * These states relate to a specific RA / TID. - * - * @IWL_AGG_OFF: aggregation is not used - * @IWL_AGG_ON: aggregation session is up - * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the - * HW queue to be empty from packets for this RA /TID. - * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the - * HW queue to be empty from packets for this RA /TID. - */ -enum iwl_agg_state { - IWL_AGG_OFF = 0, - IWL_AGG_ON, - IWL_EMPTYING_HW_QUEUE_ADDBA, - IWL_EMPTYING_HW_QUEUE_DELBA, -}; - -/** - * struct iwl_ht_agg - aggregation state machine - - * This structs holds the states for the BA agreement establishment and tear - * down. It also holds the state during the BA session itself. This struct is - * duplicated for each RA / TID. - - * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the - * Tx response (REPLY_TX), and the block ack notification - * (REPLY_COMPRESSED_BA). - * @state: state of the BA agreement establishment / tear down. - * @txq_id: Tx queue used by the BA session - used by the transport layer. - * Needed by the upper layer for debugfs only. - * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or - * the first packet to be sent in legacy HW queue in Tx AGG stop flow. - * Basically when next_reclaimed reaches ssn, we can tell mac80211 that - * we are ready to finish the Tx AGG stop / start flow. - * @wait_for_ba: Expect block-ack before next Tx reply - */ -struct iwl_ht_agg { - u32 rate_n_flags; - enum iwl_agg_state state; - u16 txq_id; - u16 ssn; - bool wait_for_ba; -}; - -/** - * struct iwl_tid_data - one for each RA / TID - - * This structs holds the states for each RA / TID. - - * @seq_number: the next WiFi sequence number to use - * @next_reclaimed: the WiFi sequence number of the next packet to be acked. - * This is basically (last acked packet++). - * @agg: aggregation state machine - */ -struct iwl_tid_data { - u16 seq_number; - u16 next_reclaimed; - struct iwl_ht_agg agg; -}; - -/* - * Structure should be accessed with sta_lock held. When station addition - * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only - * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock - * held. - */ -struct iwl_station_entry { - struct iwl_addsta_cmd sta; - u8 used, ctxid; - struct iwl_link_quality_cmd *lq; -}; - -/* - * iwl_station_priv: Driver's private station information - * - * When mac80211 creates a station it reserves some space (hw->sta_data_size) - * in the structure for use by driver. This structure is places in that - * space. - */ -struct iwl_station_priv { - struct iwl_rxon_context *ctx; - struct iwl_lq_sta lq_sta; - atomic_t pending_frames; - bool client; - bool asleep; - u8 max_agg_bufsize; - u8 sta_id; -}; - -/** - * struct iwl_vif_priv - driver's private per-interface information - * - * When mac80211 allocates a virtual interface, it can allocate - * space for us to put data into. - */ -struct iwl_vif_priv { - struct iwl_rxon_context *ctx; - u8 ibss_bssid_sta_id; -}; - -struct iwl_sensitivity_ranges { - u16 min_nrg_cck; - - u16 nrg_th_cck; - u16 nrg_th_ofdm; - - u16 auto_corr_min_ofdm; - u16 auto_corr_min_ofdm_mrc; - u16 auto_corr_min_ofdm_x1; - u16 auto_corr_min_ofdm_mrc_x1; - - u16 auto_corr_max_ofdm; - u16 auto_corr_max_ofdm_mrc; - u16 auto_corr_max_ofdm_x1; - u16 auto_corr_max_ofdm_mrc_x1; - - u16 auto_corr_max_cck; - u16 auto_corr_max_cck_mrc; - u16 auto_corr_min_cck; - u16 auto_corr_min_cck_mrc; - - u16 barker_corr_th_min; - u16 barker_corr_th_min_mrc; - u16 nrg_th_cca; -}; - - -#define KELVIN_TO_CELSIUS(x) ((x)-273) -#define CELSIUS_TO_KELVIN(x) ((x)+273) - - -/****************************************************************************** - * - * Functions implemented in core module which are forward declared here - * for use by iwl-[4-5].c - * - * NOTE: The implementation of these functions are not hardware specific - * which is why they are in the core module files. - * - * Naming convention -- - * iwl_ <-- Is part of iwlwifi - * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) - * - ****************************************************************************/ -extern void iwl_update_chain_flags(struct iwl_priv *priv); -extern const u8 iwl_bcast_addr[ETH_ALEN]; - -#define IWL_OPERATION_MODE_AUTO 0 -#define IWL_OPERATION_MODE_HT_ONLY 1 -#define IWL_OPERATION_MODE_MIXED 2 -#define IWL_OPERATION_MODE_20MHZ 3 - -#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 - -/* Sensitivity and chain noise calibration */ -#define INITIALIZATION_VALUE 0xFFFF -#define IWL_CAL_NUM_BEACONS 16 -#define MAXIMUM_ALLOWED_PATHLOSS 15 - -#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 - -#define MAX_FA_OFDM 50 -#define MIN_FA_OFDM 5 -#define MAX_FA_CCK 50 -#define MIN_FA_CCK 5 - -#define AUTO_CORR_STEP_OFDM 1 - -#define AUTO_CORR_STEP_CCK 3 -#define AUTO_CORR_MAX_TH_CCK 160 - -#define NRG_DIFF 2 -#define NRG_STEP_CCK 2 -#define NRG_MARGIN 8 -#define MAX_NUMBER_CCK_NO_FA 100 - -#define AUTO_CORR_CCK_MIN_VAL_DEF (125) - -#define CHAIN_A 0 -#define CHAIN_B 1 -#define CHAIN_C 2 -#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 -#define ALL_BAND_FILTER 0xFF00 -#define IN_BAND_FILTER 0xFF -#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF - -#define NRG_NUM_PREV_STAT_L 20 -#define NUM_RX_CHAINS 3 - -enum iwlagn_false_alarm_state { - IWL_FA_TOO_MANY = 0, - IWL_FA_TOO_FEW = 1, - IWL_FA_GOOD_RANGE = 2, -}; - -enum iwlagn_chain_noise_state { - IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ - IWL_CHAIN_NOISE_ACCUMULATE, - IWL_CHAIN_NOISE_CALIBRATED, - IWL_CHAIN_NOISE_DONE, -}; - -/* Sensitivity calib data */ -struct iwl_sensitivity_data { - u32 auto_corr_ofdm; - u32 auto_corr_ofdm_mrc; - u32 auto_corr_ofdm_x1; - u32 auto_corr_ofdm_mrc_x1; - u32 auto_corr_cck; - u32 auto_corr_cck_mrc; - - u32 last_bad_plcp_cnt_ofdm; - u32 last_fa_cnt_ofdm; - u32 last_bad_plcp_cnt_cck; - u32 last_fa_cnt_cck; - - u32 nrg_curr_state; - u32 nrg_prev_state; - u32 nrg_value[10]; - u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; - u32 nrg_silence_ref; - u32 nrg_energy_idx; - u32 nrg_silence_idx; - u32 nrg_th_cck; - s32 nrg_auto_corr_silence_diff; - u32 num_in_cck_no_fa; - u32 nrg_th_ofdm; - - u16 barker_corr_th_min; - u16 barker_corr_th_min_mrc; - u16 nrg_th_cca; -}; - -/* Chain noise (differential Rx gain) calib data */ -struct iwl_chain_noise_data { - u32 active_chains; - u32 chain_noise_a; - u32 chain_noise_b; - u32 chain_noise_c; - u32 chain_signal_a; - u32 chain_signal_b; - u32 chain_signal_c; - u16 beacon_count; - u8 disconn_array[NUM_RX_CHAINS]; - u8 delta_gain_code[NUM_RX_CHAINS]; - u8 radio_write; - u8 state; -}; - -enum { - MEASUREMENT_READY = (1 << 0), - MEASUREMENT_ACTIVE = (1 << 1), -}; - -enum iwl_nvm_type { - NVM_DEVICE_TYPE_EEPROM = 0, - NVM_DEVICE_TYPE_OTP, -}; - -/* - * Two types of OTP memory access modes - * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode, - * based on physical memory addressing - * IWL_OTP_ACCESS_RELATIVE - relative address mode, - * based on logical memory addressing - */ -enum iwl_access_mode { - IWL_OTP_ACCESS_ABSOLUTE, - IWL_OTP_ACCESS_RELATIVE, -}; - -/* reply_tx_statistics (for _agn devices) */ -struct reply_tx_error_statistics { - u32 pp_delay; - u32 pp_few_bytes; - u32 pp_bt_prio; - u32 pp_quiet_period; - u32 pp_calc_ttak; - u32 int_crossed_retry; - u32 short_limit; - u32 long_limit; - u32 fifo_underrun; - u32 drain_flow; - u32 rfkill_flush; - u32 life_expire; - u32 dest_ps; - u32 host_abort; - u32 bt_retry; - u32 sta_invalid; - u32 frag_drop; - u32 tid_disable; - u32 fifo_flush; - u32 insuff_cf_poll; - u32 fail_hw_drop; - u32 sta_color_mismatch; - u32 unknown; -}; - -/* reply_agg_tx_statistics (for _agn devices) */ -struct reply_agg_tx_error_statistics { - u32 underrun; - u32 bt_prio; - u32 few_bytes; - u32 abort; - u32 last_sent_ttl; - u32 last_sent_try; - u32 last_sent_bt_kill; - u32 scd_query; - u32 bad_crc32; - u32 response; - u32 dump_tx; - u32 delay_tx; - u32 unknown; -}; - -/* management statistics */ -enum iwl_mgmt_stats { - MANAGEMENT_ASSOC_REQ = 0, - MANAGEMENT_ASSOC_RESP, - MANAGEMENT_REASSOC_REQ, - MANAGEMENT_REASSOC_RESP, - MANAGEMENT_PROBE_REQ, - MANAGEMENT_PROBE_RESP, - MANAGEMENT_BEACON, - MANAGEMENT_ATIM, - MANAGEMENT_DISASSOC, - MANAGEMENT_AUTH, - MANAGEMENT_DEAUTH, - MANAGEMENT_ACTION, - MANAGEMENT_MAX, -}; -/* control statistics */ -enum iwl_ctrl_stats { - CONTROL_BACK_REQ = 0, - CONTROL_BACK, - CONTROL_PSPOLL, - CONTROL_RTS, - CONTROL_CTS, - CONTROL_ACK, - CONTROL_CFEND, - CONTROL_CFENDACK, - CONTROL_MAX, -}; - -struct traffic_stats { -#ifdef CONFIG_IWLWIFI_DEBUGFS - u32 mgmt[MANAGEMENT_MAX]; - u32 ctrl[CONTROL_MAX]; - u32 data_cnt; - u64 data_bytes; -#endif -}; - -/* - * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds - * to perform continuous uCode event logging operation if enabled - */ -#define UCODE_TRACE_PERIOD (10) - -/* - * iwl_event_log: current uCode event log position - * - * @ucode_trace: enable/disable ucode continuous trace timer - * @num_wraps: how many times the event buffer wraps - * @next_entry: the entry just before the next one that uCode would fill - * @non_wraps_count: counter for no wrap detected when dump ucode events - * @wraps_once_count: counter for wrap once detected when dump ucode events - * @wraps_more_count: counter for wrap more than once detected - * when dump ucode events - */ -struct iwl_event_log { - bool ucode_trace; - u32 num_wraps; - u32 next_entry; - int non_wraps_count; - int wraps_once_count; - int wraps_more_count; -}; - -/* - * This is the threshold value of plcp error rate per 100mSecs. It is - * used to set and check for the validity of plcp_delta. - */ -#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN (1) -#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF (50) -#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF (100) -#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200) -#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX (255) -#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE (0) - -#define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3) -#define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) - -/* TX queue watchdog timeouts in mSecs */ -#define IWL_DEF_WD_TIMEOUT (2000) -#define IWL_LONG_WD_TIMEOUT (10000) -#define IWL_MAX_WD_TIMEOUT (120000) - -/* BT Antenna Coupling Threshold (dB) */ -#define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35) - -/* Firmware reload counter and Timestamp */ -#define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */ -#define IWL_MAX_CONTINUE_RELOAD_CNT 4 - - -enum iwl_reset { - IWL_RF_RESET = 0, - IWL_FW_RESET, - IWL_MAX_FORCE_RESET, -}; - -struct iwl_force_reset { - int reset_request_count; - int reset_success_count; - int reset_reject_count; - unsigned long reset_duration; - unsigned long last_force_reset_jiffies; -}; - -/* extend beacon time format bit shifting */ -/* - * for _agn devices - * bits 31:22 - extended - * bits 21:0 - interval - */ -#define IWLAGN_EXT_BEACON_TIME_POS 22 - -struct iwl_rxon_context { - struct ieee80211_vif *vif; - - /* - * We could use the vif to indicate active, but we - * also need it to be active during disabling when - * we already removed the vif for type setting. - */ - bool always_active, is_active; - - bool ht_need_multiple_chains; - - enum iwl_rxon_context_id ctxid; - - u32 interface_modes, exclusive_interface_modes; - u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype; - - /* - * We declare this const so it can only be - * changed via explicit cast within the - * routines that actually update the physical - * hardware. - */ - const struct iwl_rxon_cmd active; - struct iwl_rxon_cmd staging; - - struct iwl_rxon_time_cmd timing; - - struct iwl_qos_info qos_data; - - u8 bcast_sta_id, ap_sta_id; - - u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd; - u8 qos_cmd; - u8 wep_key_cmd; - - struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; - u8 key_mapping_keys; - - __le32 station_flags; - - int beacon_int; - - struct { - bool non_gf_sta_present; - u8 protection; - bool enabled, is_40mhz; - u8 extension_chan_offset; - } ht; -}; - -enum iwl_scan_type { - IWL_SCAN_NORMAL, - IWL_SCAN_RADIO_RESET, - IWL_SCAN_ROC, -}; - -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE -struct iwl_testmode_trace { - u32 buff_size; - u32 total_size; - u32 num_chunks; - u8 *cpu_addr; - u8 *trace_addr; - dma_addr_t dma_addr; - bool trace_enabled; -}; -struct iwl_testmode_mem { - u32 buff_size; - u32 num_chunks; - u8 *buff_addr; - bool read_in_progress; -}; -#endif - -struct iwl_wipan_noa_data { - struct rcu_head rcu_head; - u32 length; - u8 data[]; -}; - -#define IWL_OP_MODE_GET_DVM(_iwl_op_mode) \ - ((struct iwl_priv *) ((_iwl_op_mode)->op_mode_specific)) - -#define IWL_MAC80211_GET_DVM(_hw) \ - ((struct iwl_priv *) ((struct iwl_op_mode *) \ - (_hw)->priv)->op_mode_specific) - -struct iwl_priv { - - /*data shared among all the driver's layers */ - struct iwl_shared *shrd; - const struct iwl_fw *fw; - unsigned long status; - - spinlock_t sta_lock; - struct mutex mutex; - - unsigned long transport_queue_stop; - bool passive_no_rx; - - /* ieee device used by generic ieee processing code */ - struct ieee80211_hw *hw; - struct ieee80211_channel *ieee_channels; - struct ieee80211_rate *ieee_rates; - - struct list_head calib_results; - - struct workqueue_struct *workqueue; - - enum ieee80211_band band; - - void (*pre_rx_handler)(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb); - int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); - - struct iwl_notif_wait_data notif_wait; - - struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; - - /* spectrum measurement report caching */ - struct iwl_spectrum_notification measure_report; - u8 measurement_status; - -#define IWL_OWNERSHIP_DRIVER 0 -#define IWL_OWNERSHIP_TM 1 - u8 ucode_owner; - - /* ucode beacon time */ - u32 ucode_beacon_time; - int missed_beacon_threshold; - - /* track IBSS manager (last beacon) status */ - u32 ibss_manager; - - /* jiffies when last recovery from statistics was performed */ - unsigned long rx_statistics_jiffies; - - /*counters */ - u32 rx_handlers_stats[REPLY_MAX]; - - /* force reset */ - struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET]; - - /* firmware reload counter and timestamp */ - unsigned long reload_jiffies; - int reload_count; - bool ucode_loaded; - bool init_ucode_run; /* Don't run init uCode again */ - - /* we allocate array of iwl_channel_info for NIC's valid channels. - * Access via channel # using indirect index array */ - struct iwl_channel_info *channel_info; /* channel info array */ - u8 channel_count; /* # of channels */ - - u8 plcp_delta_threshold; - - /* thermal calibration */ - s32 temperature; /* Celsius */ - s32 last_temperature; - - struct iwl_wipan_noa_data __rcu *noa_data; - - /* Scan related variables */ - unsigned long scan_start; - unsigned long scan_start_tsf; - void *scan_cmd; - enum ieee80211_band scan_band; - struct cfg80211_scan_request *scan_request; - struct ieee80211_vif *scan_vif; - enum iwl_scan_type scan_type; - u8 scan_tx_ant[IEEE80211_NUM_BANDS]; - u8 mgmt_tx_ant; - - /* max number of station keys */ - u8 sta_key_max_num; - - bool new_scan_threshold_behaviour; - - bool wowlan; - - /* EEPROM MAC addresses */ - struct mac_address addresses[2]; - - struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; - - __le16 switch_channel; - - u16 active_rate; - - u8 start_calib; - struct iwl_sensitivity_data sensitivity_data; - struct iwl_chain_noise_data chain_noise_data; - __le16 sensitivity_tbl[HD_TABLE_SIZE]; - __le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES]; - - struct iwl_ht_config current_ht_config; - - /* Rate scaling data */ - u8 retry_rate; - - int activity_timer_active; - - /* counts mgmt, ctl, and data packets */ - struct traffic_stats tx_stats; - struct traffic_stats rx_stats; - - struct iwl_power_mgr power_data; - struct iwl_tt_mgmt thermal_throttle; - - /* station table variables */ - int num_stations; - struct iwl_station_entry stations[IWLAGN_STATION_COUNT]; - unsigned long ucode_key_table; - struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT]; - - u8 mac80211_registered; - - /* Indication if ieee80211_ops->open has been called */ - u8 is_open; - - enum nl80211_iftype iw_mode; - - /* Last Rx'd beacon timestamp */ - u64 timestamp; - - struct { - __le32 flag; - struct statistics_general_common common; - struct statistics_rx_non_phy rx_non_phy; - struct statistics_rx_phy rx_ofdm; - struct statistics_rx_ht_phy rx_ofdm_ht; - struct statistics_rx_phy rx_cck; - struct statistics_tx tx; -#ifdef CONFIG_IWLWIFI_DEBUGFS - struct statistics_bt_activity bt_activity; - __le32 num_bt_kills, accum_num_bt_kills; -#endif - spinlock_t lock; - } statistics; -#ifdef CONFIG_IWLWIFI_DEBUGFS - struct { - struct statistics_general_common common; - struct statistics_rx_non_phy rx_non_phy; - struct statistics_rx_phy rx_ofdm; - struct statistics_rx_ht_phy rx_ofdm_ht; - struct statistics_rx_phy rx_cck; - struct statistics_tx tx; - struct statistics_bt_activity bt_activity; - } accum_stats, delta_stats, max_delta_stats; -#endif - - /* - * reporting the number of tids has AGG on. 0 means - * no AGGREGATION - */ - u8 agg_tids_count; - - struct iwl_rx_phy_res last_phy_res; - bool last_phy_res_valid; - - /* - * chain noise reset and gain commands are the - * two extra calibration commands follows the standard - * phy calibration commands - */ - u8 phy_calib_chain_noise_reset_cmd; - u8 phy_calib_chain_noise_gain_cmd; - - /* counts reply_tx error */ - struct reply_tx_error_statistics reply_tx_stats; - struct reply_agg_tx_error_statistics reply_agg_tx_stats; - - /* remain-on-channel offload support */ - struct ieee80211_channel *hw_roc_channel; - struct delayed_work hw_roc_disable_work; - enum nl80211_channel_type hw_roc_chantype; - int hw_roc_duration; - bool hw_roc_setup, hw_roc_start_notified; - - /* bt coex */ - u8 bt_enable_flag; - u8 bt_status; - u8 bt_traffic_load, last_bt_traffic_load; - bool bt_ch_announce; - bool bt_full_concurrent; - bool bt_ant_couple_ok; - __le32 kill_ack_mask; - __le32 kill_cts_mask; - __le16 bt_valid; - u16 bt_on_thresh; - u16 bt_duration; - u16 dynamic_frag_thresh; - u8 bt_ci_compliance; - struct work_struct bt_traffic_change_work; - bool bt_enable_pspoll; - struct iwl_rxon_context *cur_rssi_ctx; - bool bt_is_sco; - - struct work_struct restart; - struct work_struct scan_completed; - struct work_struct abort_scan; - - struct work_struct beacon_update; - struct iwl_rxon_context *beacon_ctx; - struct sk_buff *beacon_skb; - void *beacon_cmd; - - struct work_struct tt_work; - struct work_struct ct_enter; - struct work_struct ct_exit; - struct work_struct start_internal_scan; - struct work_struct tx_flush; - struct work_struct bt_full_concurrency; - struct work_struct bt_runtime_config; - - struct delayed_work scan_check; - - /* TX Power */ - s8 tx_power_user_lmt; - s8 tx_power_device_lmt; - s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */ - s8 tx_power_next; - -#ifdef CONFIG_IWLWIFI_DEBUGFS - /* debugfs */ - u16 tx_traffic_idx; - u16 rx_traffic_idx; - u8 *tx_traffic; - u8 *rx_traffic; - struct dentry *debugfs_dir; - u32 dbgfs_sram_offset, dbgfs_sram_len; - bool disable_ht40; - void *wowlan_sram; -#endif /* CONFIG_IWLWIFI_DEBUGFS */ - - struct work_struct txpower_work; - u32 disable_sens_cal; - u32 disable_chain_noise_cal; - struct work_struct run_time_calib_work; - struct timer_list statistics_periodic; - struct timer_list ucode_trace; - struct timer_list watchdog; - - struct iwl_event_log event_log; - - struct led_classdev led; - unsigned long blink_on, blink_off; - bool led_registered; -#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE - struct iwl_testmode_trace testmode_trace; - struct iwl_testmode_mem testmode_mem; - u32 tm_fixed_rate; -#endif - - /* WoWLAN GTK rekey data */ - u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN]; - __le64 replay_ctr; - __le16 last_seq_ctl; - bool have_rekey_data; -}; /*iwl_priv */ - -extern struct kmem_cache *iwl_tx_cmd_pool; -extern struct iwl_mod_params iwlagn_mod_params; - -static inline struct iwl_rxon_context * -iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif) -{ - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - - return vif_priv->ctx; -} - -#define for_each_context(priv, ctx) \ - for (ctx = &priv->contexts[IWL_RXON_CTX_BSS]; \ - ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \ - if (priv->shrd->valid_contexts & BIT(ctx->ctxid)) - -static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx) -{ - return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; -} - -static inline int iwl_is_associated(struct iwl_priv *priv, - enum iwl_rxon_context_id ctxid) -{ - return iwl_is_associated_ctx(&priv->contexts[ctxid]); -} - -static inline int iwl_is_any_associated(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - for_each_context(priv, ctx) - if (iwl_is_associated_ctx(ctx)) - return true; - return false; -} - -static inline int is_channel_valid(const struct iwl_channel_info *ch_info) -{ - if (ch_info == NULL) - return 0; - return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; -} - -static inline int is_channel_radar(const struct iwl_channel_info *ch_info) -{ - return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; -} - -static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info) -{ - return ch_info->band == IEEE80211_BAND_5GHZ; -} - -static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info) -{ - return ch_info->band == IEEE80211_BAND_2GHZ; -} - -static inline int is_channel_passive(const struct iwl_channel_info *ch) -{ - return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; -} - -static inline int is_channel_ibss(const struct iwl_channel_info *ch) -{ - return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; -} - -#endif /* __iwl_dev_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-devtrace.c deleted file mode 100644 index 91f45e71..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-devtrace.c +++ /dev/null @@ -1,45 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2009 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/module.h> - -/* sparse doesn't like tracepoint macros */ -#ifndef __CHECKER__ -#include "iwl-trans.h" - -#define CREATE_TRACE_POINTS -#include "iwl-devtrace.h" - -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_iowrite8); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ioread32); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_iowrite32); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_rx); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_tx); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_event); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_error); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_cont_event); -EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_wrap_event); -#endif diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-devtrace.h deleted file mode 100644 index 06203d6a..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-devtrace.h +++ /dev/null @@ -1,394 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2009 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ) -#define __IWLWIFI_DEVICE_TRACE - -#include <linux/tracepoint.h> - - -#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING) || defined(__CHECKER__) -#undef TRACE_EVENT -#define TRACE_EVENT(name, proto, ...) \ -static inline void trace_ ## name(proto) {} -#undef DECLARE_EVENT_CLASS -#define DECLARE_EVENT_CLASS(...) -#undef DEFINE_EVENT -#define DEFINE_EVENT(evt_class, name, proto, ...) \ -static inline void trace_ ## name(proto) {} -#endif - -#define DEV_ENTRY __string(dev, dev_name(dev)) -#define DEV_ASSIGN __assign_str(dev, dev_name(dev)) - -#undef TRACE_SYSTEM -#define TRACE_SYSTEM iwlwifi_io - -TRACE_EVENT(iwlwifi_dev_ioread32, - TP_PROTO(const struct device *dev, u32 offs, u32 val), - TP_ARGS(dev, offs, val), - TP_STRUCT__entry( - DEV_ENTRY - __field(u32, offs) - __field(u32, val) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->offs = offs; - __entry->val = val; - ), - TP_printk("[%s] read io[%#x] = %#x", - __get_str(dev), __entry->offs, __entry->val) -); - -TRACE_EVENT(iwlwifi_dev_iowrite8, - TP_PROTO(const struct device *dev, u32 offs, u8 val), - TP_ARGS(dev, offs, val), - TP_STRUCT__entry( - DEV_ENTRY - __field(u32, offs) - __field(u8, val) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->offs = offs; - __entry->val = val; - ), - TP_printk("[%s] write io[%#x] = %#x)", - __get_str(dev), __entry->offs, __entry->val) -); - -TRACE_EVENT(iwlwifi_dev_iowrite32, - TP_PROTO(const struct device *dev, u32 offs, u32 val), - TP_ARGS(dev, offs, val), - TP_STRUCT__entry( - DEV_ENTRY - __field(u32, offs) - __field(u32, val) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->offs = offs; - __entry->val = val; - ), - TP_printk("[%s] write io[%#x] = %#x)", - __get_str(dev), __entry->offs, __entry->val) -); - -TRACE_EVENT(iwlwifi_dev_irq, - TP_PROTO(const struct device *dev), - TP_ARGS(dev), - TP_STRUCT__entry( - DEV_ENTRY - ), - TP_fast_assign( - DEV_ASSIGN; - ), - /* TP_printk("") doesn't compile */ - TP_printk("%d", 0) -); - -TRACE_EVENT(iwlwifi_dev_ict_read, - TP_PROTO(const struct device *dev, u32 index, u32 value), - TP_ARGS(dev, index, value), - TP_STRUCT__entry( - DEV_ENTRY - __field(u32, index) - __field(u32, value) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->index = index; - __entry->value = value; - ), - TP_printk("[%s] read ict[%d] = %#.8x", - __get_str(dev), __entry->index, __entry->value) -); - -#undef TRACE_SYSTEM -#define TRACE_SYSTEM iwlwifi_ucode - -TRACE_EVENT(iwlwifi_dev_ucode_cont_event, - TP_PROTO(const struct device *dev, u32 time, u32 data, u32 ev), - TP_ARGS(dev, time, data, ev), - TP_STRUCT__entry( - DEV_ENTRY - - __field(u32, time) - __field(u32, data) - __field(u32, ev) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->time = time; - __entry->data = data; - __entry->ev = ev; - ), - TP_printk("[%s] EVT_LOGT:%010u:0x%08x:%04u", - __get_str(dev), __entry->time, __entry->data, __entry->ev) -); - -TRACE_EVENT(iwlwifi_dev_ucode_wrap_event, - TP_PROTO(const struct device *dev, u32 wraps, u32 n_entry, u32 p_entry), - TP_ARGS(dev, wraps, n_entry, p_entry), - TP_STRUCT__entry( - DEV_ENTRY - - __field(u32, wraps) - __field(u32, n_entry) - __field(u32, p_entry) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->wraps = wraps; - __entry->n_entry = n_entry; - __entry->p_entry = p_entry; - ), - TP_printk("[%s] wraps=#%02d n=0x%X p=0x%X", - __get_str(dev), __entry->wraps, __entry->n_entry, - __entry->p_entry) -); - -#undef TRACE_SYSTEM -#define TRACE_SYSTEM iwlwifi_msg - -#define MAX_MSG_LEN 100 - -DECLARE_EVENT_CLASS(iwlwifi_msg_event, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf), - TP_STRUCT__entry( - __dynamic_array(char, msg, MAX_MSG_LEN) - ), - TP_fast_assign( - WARN_ON_ONCE(vsnprintf(__get_dynamic_array(msg), - MAX_MSG_LEN, vaf->fmt, - *vaf->va) >= MAX_MSG_LEN); - ), - TP_printk("%s", (char *)__get_dynamic_array(msg)) -); - -DEFINE_EVENT(iwlwifi_msg_event, iwlwifi_err, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - -DEFINE_EVENT(iwlwifi_msg_event, iwlwifi_warn, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - -DEFINE_EVENT(iwlwifi_msg_event, iwlwifi_info, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - -DEFINE_EVENT(iwlwifi_msg_event, iwlwifi_crit, - TP_PROTO(struct va_format *vaf), - TP_ARGS(vaf) -); - -TRACE_EVENT(iwlwifi_dbg, - TP_PROTO(u32 level, bool in_interrupt, const char *function, - struct va_format *vaf), - TP_ARGS(level, in_interrupt, function, vaf), - TP_STRUCT__entry( - __field(u32, level) - __field(u8, in_interrupt) - __string(function, function) - __dynamic_array(char, msg, MAX_MSG_LEN) - ), - TP_fast_assign( - __entry->level = level; - __entry->in_interrupt = in_interrupt; - __assign_str(function, function); - WARN_ON_ONCE(vsnprintf(__get_dynamic_array(msg), - MAX_MSG_LEN, vaf->fmt, - *vaf->va) >= MAX_MSG_LEN); - ), - TP_printk("%s", (char *)__get_dynamic_array(msg)) -); - -#undef TRACE_SYSTEM -#define TRACE_SYSTEM iwlwifi - -TRACE_EVENT(iwlwifi_dev_hcmd, - TP_PROTO(const struct device *dev, u32 flags, - const void *hcmd0, size_t len0, - const void *hcmd1, size_t len1, - const void *hcmd2, size_t len2), - TP_ARGS(dev, flags, hcmd0, len0, hcmd1, len1, hcmd2, len2), - TP_STRUCT__entry( - DEV_ENTRY - __dynamic_array(u8, hcmd0, len0) - __dynamic_array(u8, hcmd1, len1) - __dynamic_array(u8, hcmd2, len2) - __field(u32, flags) - ), - TP_fast_assign( - DEV_ASSIGN; - memcpy(__get_dynamic_array(hcmd0), hcmd0, len0); - memcpy(__get_dynamic_array(hcmd1), hcmd1, len1); - memcpy(__get_dynamic_array(hcmd2), hcmd2, len2); - __entry->flags = flags; - ), - TP_printk("[%s] hcmd %#.2x (%ssync)", - __get_str(dev), ((u8 *)__get_dynamic_array(hcmd0))[0], - __entry->flags & CMD_ASYNC ? "a" : "") -); - -TRACE_EVENT(iwlwifi_dev_rx, - TP_PROTO(const struct device *dev, void *rxbuf, size_t len), - TP_ARGS(dev, rxbuf, len), - TP_STRUCT__entry( - DEV_ENTRY - __dynamic_array(u8, rxbuf, len) - ), - TP_fast_assign( - DEV_ASSIGN; - memcpy(__get_dynamic_array(rxbuf), rxbuf, len); - ), - TP_printk("[%s] RX cmd %#.2x", - __get_str(dev), ((u8 *)__get_dynamic_array(rxbuf))[4]) -); - -TRACE_EVENT(iwlwifi_dev_tx, - TP_PROTO(const struct device *dev, void *tfd, size_t tfdlen, - void *buf0, size_t buf0_len, - void *buf1, size_t buf1_len), - TP_ARGS(dev, tfd, tfdlen, buf0, buf0_len, buf1, buf1_len), - TP_STRUCT__entry( - DEV_ENTRY - - __field(size_t, framelen) - __dynamic_array(u8, tfd, tfdlen) - - /* - * Do not insert between or below these items, - * we want to keep the frame together (except - * for the possible padding). - */ - __dynamic_array(u8, buf0, buf0_len) - __dynamic_array(u8, buf1, buf1_len) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->framelen = buf0_len + buf1_len; - memcpy(__get_dynamic_array(tfd), tfd, tfdlen); - memcpy(__get_dynamic_array(buf0), buf0, buf0_len); - memcpy(__get_dynamic_array(buf1), buf1, buf1_len); - ), - TP_printk("[%s] TX %.2x (%zu bytes)", - __get_str(dev), ((u8 *)__get_dynamic_array(buf0))[0], - __entry->framelen) -); - -TRACE_EVENT(iwlwifi_dev_ucode_error, - TP_PROTO(const struct device *dev, u32 desc, u32 tsf_low, - u32 data1, u32 data2, u32 line, u32 blink1, - u32 blink2, u32 ilink1, u32 ilink2, u32 bcon_time, - u32 gp1, u32 gp2, u32 gp3, u32 ucode_ver, u32 hw_ver, - u32 brd_ver), - TP_ARGS(dev, desc, tsf_low, data1, data2, line, - blink1, blink2, ilink1, ilink2, bcon_time, gp1, gp2, - gp3, ucode_ver, hw_ver, brd_ver), - TP_STRUCT__entry( - DEV_ENTRY - __field(u32, desc) - __field(u32, tsf_low) - __field(u32, data1) - __field(u32, data2) - __field(u32, line) - __field(u32, blink1) - __field(u32, blink2) - __field(u32, ilink1) - __field(u32, ilink2) - __field(u32, bcon_time) - __field(u32, gp1) - __field(u32, gp2) - __field(u32, gp3) - __field(u32, ucode_ver) - __field(u32, hw_ver) - __field(u32, brd_ver) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->desc = desc; - __entry->tsf_low = tsf_low; - __entry->data1 = data1; - __entry->data2 = data2; - __entry->line = line; - __entry->blink1 = blink1; - __entry->blink2 = blink2; - __entry->ilink1 = ilink1; - __entry->ilink2 = ilink2; - __entry->bcon_time = bcon_time; - __entry->gp1 = gp1; - __entry->gp2 = gp2; - __entry->gp3 = gp3; - __entry->ucode_ver = ucode_ver; - __entry->hw_ver = hw_ver; - __entry->brd_ver = brd_ver; - ), - TP_printk("[%s] #%02d %010u data 0x%08X 0x%08X line %u, " - "blink 0x%05X 0x%05X ilink 0x%05X 0x%05X " - "bcon_tm %010u gp 0x%08X 0x%08X 0x%08X uCode 0x%08X " - "hw 0x%08X brd 0x%08X", - __get_str(dev), __entry->desc, __entry->tsf_low, - __entry->data1, - __entry->data2, __entry->line, __entry->blink1, - __entry->blink2, __entry->ilink1, __entry->ilink2, - __entry->bcon_time, __entry->gp1, __entry->gp2, - __entry->gp3, __entry->ucode_ver, __entry->hw_ver, - __entry->brd_ver) -); - -TRACE_EVENT(iwlwifi_dev_ucode_event, - TP_PROTO(const struct device *dev, u32 time, u32 data, u32 ev), - TP_ARGS(dev, time, data, ev), - TP_STRUCT__entry( - DEV_ENTRY - - __field(u32, time) - __field(u32, data) - __field(u32, ev) - ), - TP_fast_assign( - DEV_ASSIGN; - __entry->time = time; - __entry->data = data; - __entry->ev = ev; - ), - TP_printk("[%s] EVT_LOGT:%010u:0x%08x:%04u", - __get_str(dev), __entry->time, __entry->data, __entry->ev) -); -#endif /* __IWLWIFI_DEVICE_TRACE */ - -#undef TRACE_INCLUDE_PATH -#define TRACE_INCLUDE_PATH . -#undef TRACE_INCLUDE_FILE -#define TRACE_INCLUDE_FILE iwl-devtrace -#include <trace/define_trace.h> diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-drv.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-drv.c deleted file mode 100644 index 6f312c77..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-drv.c +++ /dev/null @@ -1,993 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#include <linux/completion.h> -#include <linux/dma-mapping.h> -#include <linux/firmware.h> -#include <linux/module.h> - -#include "iwl-drv.h" -#include "iwl-trans.h" -#include "iwl-shared.h" -#include "iwl-op-mode.h" -#include "iwl-agn-hw.h" - -/* private includes */ -#include "iwl-fw-file.h" - -/** - * struct iwl_drv - drv common data - * @fw: the iwl_fw structure - * @shrd: pointer to common shared structure - * @op_mode: the running op_mode - * @fw_index: firmware revision to try loading - * @firmware_name: composite filename of ucode file to load - * @request_firmware_complete: the firmware has been obtained from user space - */ -struct iwl_drv { - struct iwl_fw fw; - - struct iwl_shared *shrd; - struct iwl_op_mode *op_mode; - - int fw_index; /* firmware we're trying to load */ - char firmware_name[25]; /* name of firmware file to load */ - - struct completion request_firmware_complete; -}; - - - -/* - * struct fw_sec: Just for the image parsing proccess. - * For the fw storage we are using struct fw_desc. - */ -struct fw_sec { - const void *data; /* the sec data */ - size_t size; /* section size */ - u32 offset; /* offset of writing in the device */ -}; - -static void iwl_free_fw_desc(struct iwl_drv *drv, struct fw_desc *desc) -{ - if (desc->v_addr) - dma_free_coherent(trans(drv)->dev, desc->len, - desc->v_addr, desc->p_addr); - desc->v_addr = NULL; - desc->len = 0; -} - -static void iwl_free_fw_img(struct iwl_drv *drv, struct fw_img *img) -{ - int i; - for (i = 0; i < IWL_UCODE_SECTION_MAX; i++) - iwl_free_fw_desc(drv, &img->sec[i]); -} - -static void iwl_dealloc_ucode(struct iwl_drv *drv) -{ - int i; - for (i = 0; i < IWL_UCODE_TYPE_MAX; i++) - iwl_free_fw_img(drv, drv->fw.img + i); -} - -static int iwl_alloc_fw_desc(struct iwl_drv *drv, struct fw_desc *desc, - struct fw_sec *sec) -{ - if (!sec || !sec->size) { - desc->v_addr = NULL; - return -EINVAL; - } - - desc->v_addr = dma_alloc_coherent(trans(drv)->dev, sec->size, - &desc->p_addr, GFP_KERNEL); - if (!desc->v_addr) - return -ENOMEM; - - desc->len = sec->size; - desc->offset = sec->offset; - memcpy(desc->v_addr, sec->data, sec->size); - return 0; -} - -static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context); - -#define UCODE_EXPERIMENTAL_INDEX 100 -#define UCODE_EXPERIMENTAL_TAG "exp" - -static int iwl_request_firmware(struct iwl_drv *drv, bool first) -{ - const struct iwl_cfg *cfg = cfg(drv); - const char *name_pre = cfg->fw_name_pre; - char tag[8]; - - if (first) { -#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE - drv->fw_index = UCODE_EXPERIMENTAL_INDEX; - strcpy(tag, UCODE_EXPERIMENTAL_TAG); - } else if (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) { -#endif - drv->fw_index = cfg->ucode_api_max; - sprintf(tag, "%d", drv->fw_index); - } else { - drv->fw_index--; - sprintf(tag, "%d", drv->fw_index); - } - - if (drv->fw_index < cfg->ucode_api_min) { - IWL_ERR(drv, "no suitable firmware found!\n"); - return -ENOENT; - } - - sprintf(drv->firmware_name, "%s%s%s", name_pre, tag, ".ucode"); - - IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n", - (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? "EXPERIMENTAL " : "", - drv->firmware_name); - - return request_firmware_nowait(THIS_MODULE, 1, drv->firmware_name, - trans(drv)->dev, - GFP_KERNEL, drv, iwl_ucode_callback); -} - -struct fw_img_parsing { - struct fw_sec sec[IWL_UCODE_SECTION_MAX]; - int sec_counter; -}; - -/* - * struct fw_sec_parsing: to extract fw section and it's offset from tlv - */ -struct fw_sec_parsing { - __le32 offset; - const u8 data[]; -} __packed; - -/** - * struct iwl_tlv_calib_data - parse the default calib data from TLV - * - * @ucode_type: the uCode to which the following default calib relates. - * @calib: default calibrations. - */ -struct iwl_tlv_calib_data { - __le32 ucode_type; - __le64 calib; -} __packed; - -struct iwl_firmware_pieces { - struct fw_img_parsing img[IWL_UCODE_TYPE_MAX]; - - u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; - u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; -}; - -/* - * These functions are just to extract uCode section data from the pieces - * structure. - */ -static struct fw_sec *get_sec(struct iwl_firmware_pieces *pieces, - enum iwl_ucode_type type, - int sec) -{ - return &pieces->img[type].sec[sec]; -} - -static void set_sec_data(struct iwl_firmware_pieces *pieces, - enum iwl_ucode_type type, - int sec, - const void *data) -{ - pieces->img[type].sec[sec].data = data; -} - -static void set_sec_size(struct iwl_firmware_pieces *pieces, - enum iwl_ucode_type type, - int sec, - size_t size) -{ - pieces->img[type].sec[sec].size = size; -} - -static size_t get_sec_size(struct iwl_firmware_pieces *pieces, - enum iwl_ucode_type type, - int sec) -{ - return pieces->img[type].sec[sec].size; -} - -static void set_sec_offset(struct iwl_firmware_pieces *pieces, - enum iwl_ucode_type type, - int sec, - u32 offset) -{ - pieces->img[type].sec[sec].offset = offset; -} - -/* - * Gets uCode section from tlv. - */ -static int iwl_store_ucode_sec(struct iwl_firmware_pieces *pieces, - const void *data, enum iwl_ucode_type type, - int size) -{ - struct fw_img_parsing *img; - struct fw_sec *sec; - struct fw_sec_parsing *sec_parse; - - if (WARN_ON(!pieces || !data || type >= IWL_UCODE_TYPE_MAX)) - return -1; - - sec_parse = (struct fw_sec_parsing *)data; - - img = &pieces->img[type]; - sec = &img->sec[img->sec_counter]; - - sec->offset = le32_to_cpu(sec_parse->offset); - sec->data = sec_parse->data; - - ++img->sec_counter; - - return 0; -} - -static int iwl_set_default_calib(struct iwl_drv *drv, const u8 *data) -{ - struct iwl_tlv_calib_data *def_calib = - (struct iwl_tlv_calib_data *)data; - u32 ucode_type = le32_to_cpu(def_calib->ucode_type); - if (ucode_type >= IWL_UCODE_TYPE_MAX) { - IWL_ERR(drv, "Wrong ucode_type %u for default calibration.\n", - ucode_type); - return -EINVAL; - } - drv->fw.default_calib[ucode_type] = le64_to_cpu(def_calib->calib); - return 0; -} - -static int iwl_parse_v1_v2_firmware(struct iwl_drv *drv, - const struct firmware *ucode_raw, - struct iwl_firmware_pieces *pieces) -{ - struct iwl_ucode_header *ucode = (void *)ucode_raw->data; - u32 api_ver, hdr_size, build; - char buildstr[25]; - const u8 *src; - - drv->fw.ucode_ver = le32_to_cpu(ucode->ver); - api_ver = IWL_UCODE_API(drv->fw.ucode_ver); - - switch (api_ver) { - default: - hdr_size = 28; - if (ucode_raw->size < hdr_size) { - IWL_ERR(drv, "File size too small!\n"); - return -EINVAL; - } - build = le32_to_cpu(ucode->u.v2.build); - set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, - le32_to_cpu(ucode->u.v2.inst_size)); - set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, - le32_to_cpu(ucode->u.v2.data_size)); - set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, - le32_to_cpu(ucode->u.v2.init_size)); - set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, - le32_to_cpu(ucode->u.v2.init_data_size)); - src = ucode->u.v2.data; - break; - case 0: - case 1: - case 2: - hdr_size = 24; - if (ucode_raw->size < hdr_size) { - IWL_ERR(drv, "File size too small!\n"); - return -EINVAL; - } - build = 0; - set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, - le32_to_cpu(ucode->u.v1.inst_size)); - set_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, - le32_to_cpu(ucode->u.v1.data_size)); - set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, - le32_to_cpu(ucode->u.v1.init_size)); - set_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, - le32_to_cpu(ucode->u.v1.init_data_size)); - src = ucode->u.v1.data; - break; - } - - if (build) - sprintf(buildstr, " build %u%s", build, - (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? " (EXP)" : ""); - else - buildstr[0] = '\0'; - - snprintf(drv->fw.fw_version, - sizeof(drv->fw.fw_version), - "%u.%u.%u.%u%s", - IWL_UCODE_MAJOR(drv->fw.ucode_ver), - IWL_UCODE_MINOR(drv->fw.ucode_ver), - IWL_UCODE_API(drv->fw.ucode_ver), - IWL_UCODE_SERIAL(drv->fw.ucode_ver), - buildstr); - - /* Verify size of file vs. image size info in file's header */ - - if (ucode_raw->size != hdr_size + - get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) + - get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) + - get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) + - get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)) { - - IWL_ERR(drv, - "uCode file size %d does not match expected size\n", - (int)ucode_raw->size); - return -EINVAL; - } - - - set_sec_data(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, src); - src += get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST); - set_sec_offset(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST, - IWLAGN_RTC_INST_LOWER_BOUND); - set_sec_data(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, src); - src += get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA); - set_sec_offset(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA, - IWLAGN_RTC_DATA_LOWER_BOUND); - set_sec_data(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, src); - src += get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST); - set_sec_offset(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST, - IWLAGN_RTC_INST_LOWER_BOUND); - set_sec_data(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, src); - src += get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA); - set_sec_offset(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA, - IWLAGN_RTC_DATA_LOWER_BOUND); - return 0; -} - -static int iwl_parse_tlv_firmware(struct iwl_drv *drv, - const struct firmware *ucode_raw, - struct iwl_firmware_pieces *pieces, - struct iwl_ucode_capabilities *capa) -{ - struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data; - struct iwl_ucode_tlv *tlv; - size_t len = ucode_raw->size; - const u8 *data; - int wanted_alternative = iwlagn_mod_params.wanted_ucode_alternative; - int tmp; - u64 alternatives; - u32 tlv_len; - enum iwl_ucode_tlv_type tlv_type; - const u8 *tlv_data; - char buildstr[25]; - u32 build; - - if (len < sizeof(*ucode)) { - IWL_ERR(drv, "uCode has invalid length: %zd\n", len); - return -EINVAL; - } - - if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) { - IWL_ERR(drv, "invalid uCode magic: 0X%x\n", - le32_to_cpu(ucode->magic)); - return -EINVAL; - } - - /* - * Check which alternatives are present, and "downgrade" - * when the chosen alternative is not present, warning - * the user when that happens. Some files may not have - * any alternatives, so don't warn in that case. - */ - alternatives = le64_to_cpu(ucode->alternatives); - tmp = wanted_alternative; - if (wanted_alternative > 63) - wanted_alternative = 63; - while (wanted_alternative && !(alternatives & BIT(wanted_alternative))) - wanted_alternative--; - if (wanted_alternative && wanted_alternative != tmp) - IWL_WARN(drv, - "uCode alternative %d not available, choosing %d\n", - tmp, wanted_alternative); - - drv->fw.ucode_ver = le32_to_cpu(ucode->ver); - build = le32_to_cpu(ucode->build); - - if (build) - sprintf(buildstr, " build %u%s", build, - (drv->fw_index == UCODE_EXPERIMENTAL_INDEX) - ? " (EXP)" : ""); - else - buildstr[0] = '\0'; - - snprintf(drv->fw.fw_version, - sizeof(drv->fw.fw_version), - "%u.%u.%u.%u%s", - IWL_UCODE_MAJOR(drv->fw.ucode_ver), - IWL_UCODE_MINOR(drv->fw.ucode_ver), - IWL_UCODE_API(drv->fw.ucode_ver), - IWL_UCODE_SERIAL(drv->fw.ucode_ver), - buildstr); - - data = ucode->data; - - len -= sizeof(*ucode); - - while (len >= sizeof(*tlv)) { - u16 tlv_alt; - - len -= sizeof(*tlv); - tlv = (void *)data; - - tlv_len = le32_to_cpu(tlv->length); - tlv_type = le16_to_cpu(tlv->type); - tlv_alt = le16_to_cpu(tlv->alternative); - tlv_data = tlv->data; - - if (len < tlv_len) { - IWL_ERR(drv, "invalid TLV len: %zd/%u\n", - len, tlv_len); - return -EINVAL; - } - len -= ALIGN(tlv_len, 4); - data += sizeof(*tlv) + ALIGN(tlv_len, 4); - - /* - * Alternative 0 is always valid. - * - * Skip alternative TLVs that are not selected. - */ - if (tlv_alt != 0 && tlv_alt != wanted_alternative) - continue; - - switch (tlv_type) { - case IWL_UCODE_TLV_INST: - set_sec_data(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST, tlv_data); - set_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST, tlv_len); - set_sec_offset(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST, - IWLAGN_RTC_INST_LOWER_BOUND); - break; - case IWL_UCODE_TLV_DATA: - set_sec_data(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA, tlv_data); - set_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA, tlv_len); - set_sec_offset(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA, - IWLAGN_RTC_DATA_LOWER_BOUND); - break; - case IWL_UCODE_TLV_INIT: - set_sec_data(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_INST, tlv_data); - set_sec_size(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_INST, tlv_len); - set_sec_offset(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_INST, - IWLAGN_RTC_INST_LOWER_BOUND); - break; - case IWL_UCODE_TLV_INIT_DATA: - set_sec_data(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_DATA, tlv_data); - set_sec_size(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_DATA, tlv_len); - set_sec_offset(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_DATA, - IWLAGN_RTC_DATA_LOWER_BOUND); - break; - case IWL_UCODE_TLV_BOOT: - IWL_ERR(drv, "Found unexpected BOOT ucode\n"); - break; - case IWL_UCODE_TLV_PROBE_MAX_LEN: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - capa->max_probe_length = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_PAN: - if (tlv_len) - goto invalid_tlv_len; - capa->flags |= IWL_UCODE_TLV_FLAGS_PAN; - break; - case IWL_UCODE_TLV_FLAGS: - /* must be at least one u32 */ - if (tlv_len < sizeof(u32)) - goto invalid_tlv_len; - /* and a proper number of u32s */ - if (tlv_len % sizeof(u32)) - goto invalid_tlv_len; - /* - * This driver only reads the first u32 as - * right now no more features are defined, - * if that changes then either the driver - * will not work with the new firmware, or - * it'll not take advantage of new features. - */ - capa->flags = le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_EVTLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_evtlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_EVTLOG_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_evtlog_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_INIT_ERRLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->init_errlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_EVTLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_evtlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_evtlog_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_RUNT_ERRLOG_PTR: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - pieces->inst_errlog_ptr = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_ENHANCE_SENS_TBL: - if (tlv_len) - goto invalid_tlv_len; - drv->fw.enhance_sensitivity_table = true; - break; - case IWL_UCODE_TLV_WOWLAN_INST: - set_sec_data(pieces, IWL_UCODE_WOWLAN, - IWL_UCODE_SECTION_INST, tlv_data); - set_sec_size(pieces, IWL_UCODE_WOWLAN, - IWL_UCODE_SECTION_INST, tlv_len); - set_sec_offset(pieces, IWL_UCODE_WOWLAN, - IWL_UCODE_SECTION_INST, - IWLAGN_RTC_INST_LOWER_BOUND); - break; - case IWL_UCODE_TLV_WOWLAN_DATA: - set_sec_data(pieces, IWL_UCODE_WOWLAN, - IWL_UCODE_SECTION_DATA, tlv_data); - set_sec_size(pieces, IWL_UCODE_WOWLAN, - IWL_UCODE_SECTION_DATA, tlv_len); - set_sec_offset(pieces, IWL_UCODE_WOWLAN, - IWL_UCODE_SECTION_DATA, - IWLAGN_RTC_DATA_LOWER_BOUND); - break; - case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - capa->standard_phy_calibration_size = - le32_to_cpup((__le32 *)tlv_data); - break; - case IWL_UCODE_TLV_SEC_RT: - iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_REGULAR, - tlv_len); - drv->fw.mvm_fw = true; - break; - case IWL_UCODE_TLV_SEC_INIT: - iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_INIT, - tlv_len); - drv->fw.mvm_fw = true; - break; - case IWL_UCODE_TLV_SEC_WOWLAN: - iwl_store_ucode_sec(pieces, tlv_data, IWL_UCODE_WOWLAN, - tlv_len); - drv->fw.mvm_fw = true; - break; - case IWL_UCODE_TLV_DEF_CALIB: - if (tlv_len != sizeof(struct iwl_tlv_calib_data)) - goto invalid_tlv_len; - if (iwl_set_default_calib(drv, tlv_data)) - goto tlv_error; - break; - case IWL_UCODE_TLV_PHY_SKU: - if (tlv_len != sizeof(u32)) - goto invalid_tlv_len; - drv->fw.phy_config = le32_to_cpup((__le32 *)tlv_data); - break; - default: - IWL_DEBUG_INFO(drv, "unknown TLV: %d\n", tlv_type); - break; - } - } - - if (len) { - IWL_ERR(drv, "invalid TLV after parsing: %zd\n", len); - iwl_print_hex_dump(drv, IWL_DL_FW, (u8 *)data, len); - return -EINVAL; - } - - return 0; - - invalid_tlv_len: - IWL_ERR(drv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len); - tlv_error: - iwl_print_hex_dump(drv, IWL_DL_FW, tlv_data, tlv_len); - - return -EINVAL; -} - -static int alloc_pci_desc(struct iwl_drv *drv, - struct iwl_firmware_pieces *pieces, - enum iwl_ucode_type type) -{ - int i; - for (i = 0; - i < IWL_UCODE_SECTION_MAX && get_sec_size(pieces, type, i); - i++) - if (iwl_alloc_fw_desc(drv, &(drv->fw.img[type].sec[i]), - get_sec(pieces, type, i))) - return -1; - return 0; -} - -static int validate_sec_sizes(struct iwl_drv *drv, - struct iwl_firmware_pieces *pieces, - const struct iwl_cfg *cfg) -{ - IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n", - get_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n", - get_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA)); - IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n", - get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n", - get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)); - - /* Verify that uCode images will fit in card's SRAM. */ - if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) > - cfg->max_inst_size) { - IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n", - get_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST)); - return -1; - } - - if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) > - cfg->max_data_size) { - IWL_ERR(drv, "uCode data len %Zd too large to fit in\n", - get_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA)); - return -1; - } - - if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) > - cfg->max_inst_size) { - IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n", - get_sec_size(pieces, IWL_UCODE_INIT, - IWL_UCODE_SECTION_INST)); - return -1; - } - - if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) > - cfg->max_data_size) { - IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n", - get_sec_size(pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA)); - return -1; - } - return 0; -} - - -/** - * iwl_ucode_callback - callback when firmware was loaded - * - * If loaded successfully, copies the firmware into buffers - * for the card to fetch (via DMA). - */ -static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context) -{ - struct iwl_drv *drv = context; - const struct iwl_cfg *cfg = cfg(drv); - struct iwl_fw *fw = &drv->fw; - struct iwl_ucode_header *ucode; - int err; - struct iwl_firmware_pieces pieces; - const unsigned int api_max = cfg->ucode_api_max; - unsigned int api_ok = cfg->ucode_api_ok; - const unsigned int api_min = cfg->ucode_api_min; - u32 api_ver; - int i; - - fw->ucode_capa.max_probe_length = 200; - fw->ucode_capa.standard_phy_calibration_size = - IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE; - - if (!api_ok) - api_ok = api_max; - - memset(&pieces, 0, sizeof(pieces)); - - if (!ucode_raw) { - if (drv->fw_index <= api_ok) - IWL_ERR(drv, - "request for firmware file '%s' failed.\n", - drv->firmware_name); - goto try_again; - } - - IWL_DEBUG_INFO(drv, "Loaded firmware file '%s' (%zd bytes).\n", - drv->firmware_name, ucode_raw->size); - - /* Make sure that we got at least the API version number */ - if (ucode_raw->size < 4) { - IWL_ERR(drv, "File size way too small!\n"); - goto try_again; - } - - /* Data from ucode file: header followed by uCode images */ - ucode = (struct iwl_ucode_header *)ucode_raw->data; - - if (ucode->ver) - err = iwl_parse_v1_v2_firmware(drv, ucode_raw, &pieces); - else - err = iwl_parse_tlv_firmware(drv, ucode_raw, &pieces, - &fw->ucode_capa); - - if (err) - goto try_again; - - api_ver = IWL_UCODE_API(drv->fw.ucode_ver); - - /* - * api_ver should match the api version forming part of the - * firmware filename ... but we don't check for that and only rely - * on the API version read from firmware header from here on forward - */ - /* no api version check required for experimental uCode */ - if (drv->fw_index != UCODE_EXPERIMENTAL_INDEX) { - if (api_ver < api_min || api_ver > api_max) { - IWL_ERR(drv, - "Driver unable to support your firmware API. " - "Driver supports v%u, firmware is v%u.\n", - api_max, api_ver); - goto try_again; - } - - if (api_ver < api_ok) { - if (api_ok != api_max) - IWL_ERR(drv, "Firmware has old API version, " - "expected v%u through v%u, got v%u.\n", - api_ok, api_max, api_ver); - else - IWL_ERR(drv, "Firmware has old API version, " - "expected v%u, got v%u.\n", - api_max, api_ver); - IWL_ERR(drv, "New firmware can be obtained from " - "http://www.intellinuxwireless.org/.\n"); - } - } - - IWL_INFO(drv, "loaded firmware version %s", drv->fw.fw_version); - - /* - * For any of the failures below (before allocating pci memory) - * we will try to load a version with a smaller API -- maybe the - * user just got a corrupted version of the latest API. - */ - - IWL_DEBUG_INFO(drv, "f/w package hdr ucode version raw = 0x%x\n", - drv->fw.ucode_ver); - IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n", - get_sec_size(&pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n", - get_sec_size(&pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA)); - IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n", - get_sec_size(&pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n", - get_sec_size(&pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)); - - /* Verify that uCode images will fit in card's SRAM */ - if (get_sec_size(&pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) > - cfg->max_inst_size) { - IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n", - get_sec_size(&pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_INST)); - goto try_again; - } - - if (get_sec_size(&pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) > - cfg->max_data_size) { - IWL_ERR(drv, "uCode data len %Zd too large to fit in\n", - get_sec_size(&pieces, IWL_UCODE_REGULAR, - IWL_UCODE_SECTION_DATA)); - goto try_again; - } - - /* - * In mvm uCode there is no difference between data and instructions - * sections. - */ - if (!fw->mvm_fw && validate_sec_sizes(drv, &pieces, cfg)) - goto try_again; - - /* Allocate ucode buffers for card's bus-master loading ... */ - - /* Runtime instructions and 2 copies of data: - * 1) unmodified from disk - * 2) backup cache for save/restore during power-downs */ - for (i = 0; i < IWL_UCODE_TYPE_MAX; i++) - if (alloc_pci_desc(drv, &pieces, i)) - goto err_pci_alloc; - - /* Now that we can no longer fail, copy information */ - - /* - * The (size - 16) / 12 formula is based on the information recorded - * for each event, which is of mode 1 (including timestamp) for all - * new microcodes that include this information. - */ - fw->init_evtlog_ptr = pieces.init_evtlog_ptr; - if (pieces.init_evtlog_size) - fw->init_evtlog_size = (pieces.init_evtlog_size - 16)/12; - else - fw->init_evtlog_size = - cfg->base_params->max_event_log_size; - fw->init_errlog_ptr = pieces.init_errlog_ptr; - fw->inst_evtlog_ptr = pieces.inst_evtlog_ptr; - if (pieces.inst_evtlog_size) - fw->inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12; - else - fw->inst_evtlog_size = - cfg->base_params->max_event_log_size; - fw->inst_errlog_ptr = pieces.inst_errlog_ptr; - - /* - * figure out the offset of chain noise reset and gain commands - * base on the size of standard phy calibration commands table size - */ - if (fw->ucode_capa.standard_phy_calibration_size > - IWL_MAX_PHY_CALIBRATE_TBL_SIZE) - fw->ucode_capa.standard_phy_calibration_size = - IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE; - - /* We have our copies now, allow OS release its copies */ - release_firmware(ucode_raw); - complete(&drv->request_firmware_complete); - - drv->op_mode = iwl_dvm_ops.start(drv->shrd->trans, &drv->fw); - - if (!drv->op_mode) - goto out_unbind; - - return; - - try_again: - /* try next, if any */ - release_firmware(ucode_raw); - if (iwl_request_firmware(drv, false)) - goto out_unbind; - return; - - err_pci_alloc: - IWL_ERR(drv, "failed to allocate pci memory\n"); - iwl_dealloc_ucode(drv); - release_firmware(ucode_raw); - out_unbind: - complete(&drv->request_firmware_complete); - device_release_driver(trans(drv)->dev); -} - -int iwl_drv_start(struct iwl_shared *shrd, - struct iwl_trans *trans, const struct iwl_cfg *cfg) -{ - struct iwl_drv *drv; - int ret; - - shrd->cfg = cfg; - - drv = kzalloc(sizeof(*drv), GFP_KERNEL); - if (!drv) { - dev_printk(KERN_ERR, trans->dev, "Couldn't allocate iwl_drv"); - return -ENOMEM; - } - drv->shrd = shrd; - shrd->drv = drv; - - init_completion(&drv->request_firmware_complete); - - ret = iwl_request_firmware(drv, true); - - if (ret) { - dev_printk(KERN_ERR, trans->dev, "Couldn't request the fw"); - kfree(drv); - shrd->drv = NULL; - } - - return ret; -} - -void iwl_drv_stop(struct iwl_shared *shrd) -{ - struct iwl_drv *drv = shrd->drv; - - wait_for_completion(&drv->request_firmware_complete); - - /* op_mode can be NULL if its start failed */ - if (drv->op_mode) - iwl_op_mode_stop(drv->op_mode); - - iwl_dealloc_ucode(drv); - - kfree(drv); - shrd->drv = NULL; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-drv.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-drv.h deleted file mode 100644 index 3b771c1d..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-drv.h +++ /dev/null @@ -1,123 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_drv_h__ -#define __iwl_drv_h__ - -#include "iwl-shared.h" - -/** - * DOC: Driver system flows - drv component - * - * This component implements the system flows such as bus enumeration, bus - * removal. Bus dependent parts of system flows (such as iwl_pci_probe) are in - * bus specific files (transport files). This is the code that is common among - * different buses. - * - * This component is also in charge of managing the several implementations of - * the wifi flows: it will allow to have several fw API implementation. These - * different implementations will differ in the way they implement mac80211's - * handlers too. - - * The init flow wrt to the drv component looks like this: - * 1) The bus specific component is called from module_init - * 2) The bus specific component registers the bus driver - * 3) The bus driver calls the probe function - * 4) The bus specific component configures the bus - * 5) The bus specific component calls to the drv bus agnostic part - * (iwl_drv_start) - * 6) iwl_drv_start fetches the fw ASYNC, iwl_ucode_callback - * 7) iwl_ucode_callback parses the fw file - * 8) iwl_ucode_callback starts the wifi implementation to matches the fw - */ - -/** - * iwl_drv_start - start the drv - * - * @shrd: the shrd area - * @trans_ops: the ops of the transport - * @cfg: device specific constants / virtual functions - * - * TODO: review the parameters given to this function - * - * starts the driver: fetches the firmware. This should be called by bus - * specific system flows implementations. For example, the bus specific probe - * function should do bus related operations only, and then call to this - * function. - */ -int iwl_drv_start(struct iwl_shared *shrd, - struct iwl_trans *trans, const struct iwl_cfg *cfg); - -/** - * iwl_drv_stop - stop the drv - * - * @shrd: the shrd area - * - * TODO: review the parameters given to this function - * - * Stop the driver. This should be called by bus specific system flows - * implementations. For example, the bus specific remove function should first - * call this function and then do the bus related operations only. - */ -void iwl_drv_stop(struct iwl_shared *shrd); - -#endif /* __iwl_drv_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-eeprom.c deleted file mode 100644 index 79dddc48..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ /dev/null @@ -1,1094 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include <net/mac80211.h> - -#include "iwl-commands.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-debug.h" -#include "iwl-agn.h" -#include "iwl-eeprom.h" -#include "iwl-io.h" -#include "iwl-prph.h" - -/************************** EEPROM BANDS **************************** - * - * The iwl_eeprom_band definitions below provide the mapping from the - * EEPROM contents to the specific channel number supported for each - * band. - * - * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3 - * definition below maps to physical channel 42 in the 5.2GHz spectrum. - * The specific geography and calibration information for that channel - * is contained in the eeprom map itself. - * - * During init, we copy the eeprom information and channel map - * information into priv->channel_info_24/52 and priv->channel_map_24/52 - * - * channel_map_24/52 provides the index in the channel_info array for a - * given channel. We have to have two separate maps as there is channel - * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and - * band_2 - * - * A value of 0xff stored in the channel_map indicates that the channel - * is not supported by the hardware at all. - * - * A value of 0xfe in the channel_map indicates that the channel is not - * valid for Tx with the current hardware. This means that - * while the system can tune and receive on a given channel, it may not - * be able to associate or transmit any frames on that - * channel. There is no corresponding channel information for that - * entry. - * - *********************************************************************/ - -/* 2.4 GHz */ -const u8 iwl_eeprom_band_1[14] = { - 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 -}; - -/* 5.2 GHz bands */ -static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */ - 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 -}; - -static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */ - 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 -}; - -static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */ - 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 -}; - -static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */ - 145, 149, 153, 157, 161, 165 -}; - -static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */ - 1, 2, 3, 4, 5, 6, 7 -}; - -static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */ - 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 -}; - -/****************************************************************************** - * - * generic NVM functions - * -******************************************************************************/ - -/* - * The device's EEPROM semaphore prevents conflicts between driver and uCode - * when accessing the EEPROM; each access is a series of pulses to/from the - * EEPROM chip, not a single event, so even reads could conflict if they - * weren't arbitrated by the semaphore. - */ - -#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ -#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ - -static int iwl_eeprom_acquire_semaphore(struct iwl_trans *trans) -{ - u16 count; - int ret; - - for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) { - /* Request semaphore */ - iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); - - /* See if we got it */ - ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, - EEPROM_SEM_TIMEOUT); - if (ret >= 0) { - IWL_DEBUG_EEPROM(trans, - "Acquired semaphore after %d tries.\n", - count+1); - return ret; - } - } - - return ret; -} - -static void iwl_eeprom_release_semaphore(struct iwl_trans *trans) -{ - iwl_clear_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); - -} - -static int iwl_eeprom_verify_signature(struct iwl_trans *trans) -{ - u32 gp = iwl_read32(trans, CSR_EEPROM_GP) & - CSR_EEPROM_GP_VALID_MSK; - int ret = 0; - - IWL_DEBUG_EEPROM(trans, "EEPROM signature=0x%08x\n", gp); - switch (gp) { - case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP: - if (trans->nvm_device_type != NVM_DEVICE_TYPE_OTP) { - IWL_ERR(trans, "EEPROM with bad signature: 0x%08x\n", - gp); - ret = -ENOENT; - } - break; - case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K: - case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K: - if (trans->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) { - IWL_ERR(trans, "OTP with bad signature: 0x%08x\n", gp); - ret = -ENOENT; - } - break; - case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP: - default: - IWL_ERR(trans, "bad EEPROM/OTP signature, type=%s, " - "EEPROM_GP=0x%08x\n", - (trans->nvm_device_type == NVM_DEVICE_TYPE_OTP) - ? "OTP" : "EEPROM", gp); - ret = -ENOENT; - break; - } - return ret; -} - -u16 iwl_eeprom_query16(const struct iwl_shared *shrd, size_t offset) -{ - if (!shrd->eeprom) - return 0; - return (u16)shrd->eeprom[offset] | ((u16)shrd->eeprom[offset + 1] << 8); -} - -int iwl_eeprom_check_version(struct iwl_priv *priv) -{ - u16 eeprom_ver; - u16 calib_ver; - - eeprom_ver = iwl_eeprom_query16(priv->shrd, EEPROM_VERSION); - calib_ver = iwl_eeprom_calib_version(priv->shrd); - - if (eeprom_ver < cfg(priv)->eeprom_ver || - calib_ver < cfg(priv)->eeprom_calib_ver) - goto err; - - IWL_INFO(priv, "device EEPROM VER=0x%x, CALIB=0x%x\n", - eeprom_ver, calib_ver); - - return 0; -err: - IWL_ERR(priv, "Unsupported (too old) EEPROM VER=0x%x < 0x%x " - "CALIB=0x%x < 0x%x\n", - eeprom_ver, cfg(priv)->eeprom_ver, - calib_ver, cfg(priv)->eeprom_calib_ver); - return -EINVAL; - -} - -int iwl_eeprom_init_hw_params(struct iwl_priv *priv) -{ - struct iwl_shared *shrd = priv->shrd; - u16 radio_cfg; - - hw_params(priv).sku = iwl_eeprom_query16(shrd, EEPROM_SKU_CAP); - if (hw_params(priv).sku & EEPROM_SKU_CAP_11N_ENABLE && - !cfg(priv)->ht_params) { - IWL_ERR(priv, "Invalid 11n configuration\n"); - return -EINVAL; - } - - if (!hw_params(priv).sku) { - IWL_ERR(priv, "Invalid device sku\n"); - return -EINVAL; - } - - IWL_INFO(priv, "Device SKU: 0x%X\n", hw_params(priv).sku); - - radio_cfg = iwl_eeprom_query16(shrd, EEPROM_RADIO_CONFIG); - - hw_params(priv).valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg); - hw_params(priv).valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg); - - /* check overrides (some devices have wrong EEPROM) */ - if (cfg(priv)->valid_tx_ant) - hw_params(priv).valid_tx_ant = cfg(priv)->valid_tx_ant; - if (cfg(priv)->valid_rx_ant) - hw_params(priv).valid_rx_ant = cfg(priv)->valid_rx_ant; - - if (!hw_params(priv).valid_tx_ant || !hw_params(priv).valid_rx_ant) { - IWL_ERR(priv, "Invalid chain (0x%X, 0x%X)\n", - hw_params(priv).valid_tx_ant, - hw_params(priv).valid_rx_ant); - return -EINVAL; - } - - IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n", - hw_params(priv).valid_tx_ant, hw_params(priv).valid_rx_ant); - - return 0; -} - -void iwl_eeprom_get_mac(const struct iwl_shared *shrd, u8 *mac) -{ - const u8 *addr = iwl_eeprom_query_addr(shrd, - EEPROM_MAC_ADDRESS); - memcpy(mac, addr, ETH_ALEN); -} - -/****************************************************************************** - * - * OTP related functions - * -******************************************************************************/ - -static void iwl_set_otp_access(struct iwl_trans *trans, - enum iwl_access_mode mode) -{ - iwl_read32(trans, CSR_OTP_GP_REG); - - if (mode == IWL_OTP_ACCESS_ABSOLUTE) - iwl_clear_bit(trans, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_OTP_ACCESS_MODE); - else - iwl_set_bit(trans, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_OTP_ACCESS_MODE); -} - -static int iwl_get_nvm_type(struct iwl_trans *trans, u32 hw_rev) -{ - u32 otpgp; - int nvm_type; - - /* OTP only valid for CP/PP and after */ - switch (hw_rev & CSR_HW_REV_TYPE_MSK) { - case CSR_HW_REV_TYPE_NONE: - IWL_ERR(trans, "Unknown hardware type\n"); - return -ENOENT; - case CSR_HW_REV_TYPE_5300: - case CSR_HW_REV_TYPE_5350: - case CSR_HW_REV_TYPE_5100: - case CSR_HW_REV_TYPE_5150: - nvm_type = NVM_DEVICE_TYPE_EEPROM; - break; - default: - otpgp = iwl_read32(trans, CSR_OTP_GP_REG); - if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT) - nvm_type = NVM_DEVICE_TYPE_OTP; - else - nvm_type = NVM_DEVICE_TYPE_EEPROM; - break; - } - return nvm_type; -} - -static int iwl_init_otp_access(struct iwl_trans *trans) -{ - int ret; - - /* Enable 40MHz radio clock */ - iwl_write32(trans, CSR_GP_CNTRL, - iwl_read32(trans, CSR_GP_CNTRL) | - CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - /* wait for clock to be ready */ - ret = iwl_poll_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - 25000); - if (ret < 0) - IWL_ERR(trans, "Time out access OTP\n"); - else { - iwl_set_bits_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - udelay(5); - iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_RESET_REQ); - - /* - * CSR auto clock gate disable bit - - * this is only applicable for HW with OTP shadow RAM - */ - if (cfg(trans)->base_params->shadow_ram_support) - iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG, - CSR_RESET_LINK_PWR_MGMT_DISABLED); - } - return ret; -} - -static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr, - __le16 *eeprom_data) -{ - int ret = 0; - u32 r; - u32 otpgp; - - iwl_write32(trans, CSR_EEPROM_REG, - CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); - ret = iwl_poll_bit(trans, CSR_EEPROM_REG, - CSR_EEPROM_REG_READ_VALID_MSK, - CSR_EEPROM_REG_READ_VALID_MSK, - IWL_EEPROM_ACCESS_TIMEOUT); - if (ret < 0) { - IWL_ERR(trans, "Time out reading OTP[%d]\n", addr); - return ret; - } - r = iwl_read32(trans, CSR_EEPROM_REG); - /* check for ECC errors: */ - otpgp = iwl_read32(trans, CSR_OTP_GP_REG); - if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) { - /* stop in this case */ - /* set the uncorrectable OTP ECC bit for acknowledgement */ - iwl_set_bit(trans, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); - IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n"); - return -EINVAL; - } - if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) { - /* continue in this case */ - /* set the correctable OTP ECC bit for acknowledgement */ - iwl_set_bit(trans, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); - IWL_ERR(trans, "Correctable OTP ECC error, continue read\n"); - } - *eeprom_data = cpu_to_le16(r >> 16); - return 0; -} - -/* - * iwl_is_otp_empty: check for empty OTP - */ -static bool iwl_is_otp_empty(struct iwl_trans *trans) -{ - u16 next_link_addr = 0; - __le16 link_value; - bool is_empty = false; - - /* locate the beginning of OTP link list */ - if (!iwl_read_otp_word(trans, next_link_addr, &link_value)) { - if (!link_value) { - IWL_ERR(trans, "OTP is empty\n"); - is_empty = true; - } - } else { - IWL_ERR(trans, "Unable to read first block of OTP list.\n"); - is_empty = true; - } - - return is_empty; -} - - -/* - * iwl_find_otp_image: find EEPROM image in OTP - * finding the OTP block that contains the EEPROM image. - * the last valid block on the link list (the block _before_ the last block) - * is the block we should read and used to configure the device. - * If all the available OTP blocks are full, the last block will be the block - * we should read and used to configure the device. - * only perform this operation if shadow RAM is disabled - */ -static int iwl_find_otp_image(struct iwl_trans *trans, - u16 *validblockaddr) -{ - u16 next_link_addr = 0, valid_addr; - __le16 link_value = 0; - int usedblocks = 0; - - /* set addressing mode to absolute to traverse the link list */ - iwl_set_otp_access(trans, IWL_OTP_ACCESS_ABSOLUTE); - - /* checking for empty OTP or error */ - if (iwl_is_otp_empty(trans)) - return -EINVAL; - - /* - * start traverse link list - * until reach the max number of OTP blocks - * different devices have different number of OTP blocks - */ - do { - /* save current valid block address - * check for more block on the link list - */ - valid_addr = next_link_addr; - next_link_addr = le16_to_cpu(link_value) * sizeof(u16); - IWL_DEBUG_EEPROM(trans, "OTP blocks %d addr 0x%x\n", - usedblocks, next_link_addr); - if (iwl_read_otp_word(trans, next_link_addr, &link_value)) - return -EINVAL; - if (!link_value) { - /* - * reach the end of link list, return success and - * set address point to the starting address - * of the image - */ - *validblockaddr = valid_addr; - /* skip first 2 bytes (link list pointer) */ - *validblockaddr += 2; - return 0; - } - /* more in the link list, continue */ - usedblocks++; - } while (usedblocks <= cfg(trans)->base_params->max_ll_items); - - /* OTP has no valid blocks */ - IWL_DEBUG_EEPROM(trans, "OTP has no valid blocks\n"); - return -EINVAL; -} - -/****************************************************************************** - * - * Tx Power related functions - * -******************************************************************************/ -/** - * iwl_get_max_txpower_avg - get the highest tx power from all chains. - * find the highest tx power from all chains for the channel - */ -static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, - struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, - int element, s8 *max_txpower_in_half_dbm) -{ - s8 max_txpower_avg = 0; /* (dBm) */ - - /* Take the highest tx power from any valid chains */ - if ((hw_params(priv).valid_tx_ant & ANT_A) && - (enhanced_txpower[element].chain_a_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].chain_a_max; - if ((hw_params(priv).valid_tx_ant & ANT_B) && - (enhanced_txpower[element].chain_b_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].chain_b_max; - if ((hw_params(priv).valid_tx_ant & ANT_C) && - (enhanced_txpower[element].chain_c_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].chain_c_max; - if (((hw_params(priv).valid_tx_ant == ANT_AB) | - (hw_params(priv).valid_tx_ant == ANT_BC) | - (hw_params(priv).valid_tx_ant == ANT_AC)) && - (enhanced_txpower[element].mimo2_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].mimo2_max; - if ((hw_params(priv).valid_tx_ant == ANT_ABC) && - (enhanced_txpower[element].mimo3_max > max_txpower_avg)) - max_txpower_avg = enhanced_txpower[element].mimo3_max; - - /* - * max. tx power in EEPROM is in 1/2 dBm format - * convert from 1/2 dBm to dBm (round-up convert) - * but we also do not want to loss 1/2 dBm resolution which - * will impact performance - */ - *max_txpower_in_half_dbm = max_txpower_avg; - return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1); -} - -static void -iwl_eeprom_enh_txp_read_element(struct iwl_priv *priv, - struct iwl_eeprom_enhanced_txpwr *txp, - s8 max_txpower_avg) -{ - int ch_idx; - bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ; - enum ieee80211_band band; - - band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ? - IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ; - - for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) { - struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx]; - - /* update matching channel or from common data only */ - if (txp->channel != 0 && ch_info->channel != txp->channel) - continue; - - /* update matching band only */ - if (band != ch_info->band) - continue; - - if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) { - ch_info->max_power_avg = max_txpower_avg; - ch_info->curr_txpow = max_txpower_avg; - ch_info->scan_power = max_txpower_avg; - } - - if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg) - ch_info->ht40_max_power_avg = max_txpower_avg; - } -} - -#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT) -#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr) -#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE) - -#define TXP_CHECK_AND_PRINT(x) ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) \ - ? # x " " : "") - -static void iwl_eeprom_enhanced_txpower(struct iwl_priv *priv) -{ - struct iwl_shared *shrd = priv->shrd; - struct iwl_eeprom_enhanced_txpwr *txp_array, *txp; - int idx, entries; - __le16 *txp_len; - s8 max_txp_avg, max_txp_avg_halfdbm; - - BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8); - - /* the length is in 16-bit words, but we want entries */ - txp_len = (__le16 *) iwl_eeprom_query_addr(shrd, EEPROM_TXP_SZ_OFFS); - entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN; - - txp_array = (void *) iwl_eeprom_query_addr(shrd, EEPROM_TXP_OFFS); - - for (idx = 0; idx < entries; idx++) { - txp = &txp_array[idx]; - /* skip invalid entries */ - if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID)) - continue; - - IWL_DEBUG_EEPROM(priv, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n", - (txp->channel && (txp->flags & - IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ? - "Common " : (txp->channel) ? - "Channel" : "Common", - (txp->channel), - TXP_CHECK_AND_PRINT(VALID), - TXP_CHECK_AND_PRINT(BAND_52G), - TXP_CHECK_AND_PRINT(OFDM), - TXP_CHECK_AND_PRINT(40MHZ), - TXP_CHECK_AND_PRINT(HT_AP), - TXP_CHECK_AND_PRINT(RES1), - TXP_CHECK_AND_PRINT(RES2), - TXP_CHECK_AND_PRINT(COMMON_TYPE), - txp->flags); - IWL_DEBUG_EEPROM(priv, "\t\t chain_A: 0x%02x " - "chain_B: 0X%02x chain_C: 0X%02x\n", - txp->chain_a_max, txp->chain_b_max, - txp->chain_c_max); - IWL_DEBUG_EEPROM(priv, "\t\t MIMO2: 0x%02x " - "MIMO3: 0x%02x High 20_on_40: 0x%02x " - "Low 20_on_40: 0x%02x\n", - txp->mimo2_max, txp->mimo3_max, - ((txp->delta_20_in_40 & 0xf0) >> 4), - (txp->delta_20_in_40 & 0x0f)); - - max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx, - &max_txp_avg_halfdbm); - - /* - * Update the user limit values values to the highest - * power supported by any channel - */ - if (max_txp_avg > priv->tx_power_user_lmt) - priv->tx_power_user_lmt = max_txp_avg; - if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm) - priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm; - - iwl_eeprom_enh_txp_read_element(priv, txp, max_txp_avg); - } -} - -/** - * iwl_eeprom_init - read EEPROM contents - * - * Load the EEPROM contents from adapter into shrd->eeprom - * - * NOTE: This routine uses the non-debug IO access functions. - */ -int iwl_eeprom_init(struct iwl_trans *trans, u32 hw_rev) -{ - __le16 *e; - u32 gp = iwl_read32(trans, CSR_EEPROM_GP); - int sz; - int ret; - u16 addr; - u16 validblockaddr = 0; - u16 cache_addr = 0; - - trans->nvm_device_type = iwl_get_nvm_type(trans, hw_rev); - if (trans->nvm_device_type == -ENOENT) - return -ENOENT; - /* allocate eeprom */ - sz = cfg(trans)->base_params->eeprom_size; - IWL_DEBUG_EEPROM(trans, "NVM size = %d\n", sz); - trans->shrd->eeprom = kzalloc(sz, GFP_KERNEL); - if (!trans->shrd->eeprom) { - ret = -ENOMEM; - goto alloc_err; - } - e = (__le16 *)trans->shrd->eeprom; - - ret = iwl_eeprom_verify_signature(trans); - if (ret < 0) { - IWL_ERR(trans, "EEPROM not found, EEPROM_GP=0x%08x\n", gp); - ret = -ENOENT; - goto err; - } - - /* Make sure driver (instead of uCode) is allowed to read EEPROM */ - ret = iwl_eeprom_acquire_semaphore(trans); - if (ret < 0) { - IWL_ERR(trans, "Failed to acquire EEPROM semaphore.\n"); - ret = -ENOENT; - goto err; - } - - if (trans->nvm_device_type == NVM_DEVICE_TYPE_OTP) { - - ret = iwl_init_otp_access(trans); - if (ret) { - IWL_ERR(trans, "Failed to initialize OTP access.\n"); - ret = -ENOENT; - goto done; - } - iwl_write32(trans, CSR_EEPROM_GP, - iwl_read32(trans, CSR_EEPROM_GP) & - ~CSR_EEPROM_GP_IF_OWNER_MSK); - - iwl_set_bit(trans, CSR_OTP_GP_REG, - CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK | - CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); - /* traversing the linked list if no shadow ram supported */ - if (!cfg(trans)->base_params->shadow_ram_support) { - if (iwl_find_otp_image(trans, &validblockaddr)) { - ret = -ENOENT; - goto done; - } - } - for (addr = validblockaddr; addr < validblockaddr + sz; - addr += sizeof(u16)) { - __le16 eeprom_data; - - ret = iwl_read_otp_word(trans, addr, &eeprom_data); - if (ret) - goto done; - e[cache_addr / 2] = eeprom_data; - cache_addr += sizeof(u16); - } - } else { - /* eeprom is an array of 16bit values */ - for (addr = 0; addr < sz; addr += sizeof(u16)) { - u32 r; - - iwl_write32(trans, CSR_EEPROM_REG, - CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); - - ret = iwl_poll_bit(trans, CSR_EEPROM_REG, - CSR_EEPROM_REG_READ_VALID_MSK, - CSR_EEPROM_REG_READ_VALID_MSK, - IWL_EEPROM_ACCESS_TIMEOUT); - if (ret < 0) { - IWL_ERR(trans, - "Time out reading EEPROM[%d]\n", addr); - goto done; - } - r = iwl_read32(trans, CSR_EEPROM_REG); - e[addr / 2] = cpu_to_le16(r >> 16); - } - } - - IWL_DEBUG_EEPROM(trans, "NVM Type: %s, version: 0x%x\n", - (trans->nvm_device_type == NVM_DEVICE_TYPE_OTP) - ? "OTP" : "EEPROM", - iwl_eeprom_query16(trans->shrd, EEPROM_VERSION)); - - ret = 0; -done: - iwl_eeprom_release_semaphore(trans); - -err: - if (ret) - iwl_eeprom_free(trans->shrd); -alloc_err: - return ret; -} - -void iwl_eeprom_free(struct iwl_shared *shrd) -{ - kfree(shrd->eeprom); - shrd->eeprom = NULL; -} - -static void iwl_init_band_reference(const struct iwl_priv *priv, - int eep_band, int *eeprom_ch_count, - const struct iwl_eeprom_channel **eeprom_ch_info, - const u8 **eeprom_ch_index) -{ - struct iwl_shared *shrd = priv->shrd; - u32 offset = cfg(priv)->lib-> - eeprom_ops.regulatory_bands[eep_band - 1]; - switch (eep_band) { - case 1: /* 2.4GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_1; - break; - case 2: /* 4.9GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_2; - break; - case 3: /* 5.2GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_3; - break; - case 4: /* 5.5GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_4; - break; - case 5: /* 5.7GHz band */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_5; - break; - case 6: /* 2.4GHz ht40 channels */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_6; - break; - case 7: /* 5 GHz ht40 channels */ - *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); - *eeprom_ch_info = (struct iwl_eeprom_channel *) - iwl_eeprom_query_addr(shrd, offset); - *eeprom_ch_index = iwl_eeprom_band_7; - break; - default: - BUG(); - return; - } -} - -#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \ - ? # x " " : "") -/** - * iwl_mod_ht40_chan_info - Copy ht40 channel info into driver's priv. - * - * Does not set up a command, or touch hardware. - */ -static int iwl_mod_ht40_chan_info(struct iwl_priv *priv, - enum ieee80211_band band, u16 channel, - const struct iwl_eeprom_channel *eeprom_ch, - u8 clear_ht40_extension_channel) -{ - struct iwl_channel_info *ch_info; - - ch_info = (struct iwl_channel_info *) - iwl_get_channel_info(priv, band, channel); - - if (!is_channel_valid(ch_info)) - return -1; - - IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):" - " Ad-Hoc %ssupported\n", - ch_info->channel, - is_channel_a_band(ch_info) ? - "5.2" : "2.4", - CHECK_AND_PRINT(IBSS), - CHECK_AND_PRINT(ACTIVE), - CHECK_AND_PRINT(RADAR), - CHECK_AND_PRINT(WIDE), - CHECK_AND_PRINT(DFS), - eeprom_ch->flags, - eeprom_ch->max_power_avg, - ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) - && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? - "" : "not "); - - ch_info->ht40_eeprom = *eeprom_ch; - ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg; - ch_info->ht40_flags = eeprom_ch->flags; - if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) - ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel; - - return 0; -} - -#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \ - ? # x " " : "") - -/** - * iwl_init_channel_map - Set up driver's info for all possible channels - */ -int iwl_init_channel_map(struct iwl_priv *priv) -{ - int eeprom_ch_count = 0; - const u8 *eeprom_ch_index = NULL; - const struct iwl_eeprom_channel *eeprom_ch_info = NULL; - int band, ch; - struct iwl_channel_info *ch_info; - - if (priv->channel_count) { - IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n"); - return 0; - } - - IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n"); - - priv->channel_count = - ARRAY_SIZE(iwl_eeprom_band_1) + - ARRAY_SIZE(iwl_eeprom_band_2) + - ARRAY_SIZE(iwl_eeprom_band_3) + - ARRAY_SIZE(iwl_eeprom_band_4) + - ARRAY_SIZE(iwl_eeprom_band_5); - - IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n", - priv->channel_count); - - priv->channel_info = kcalloc(priv->channel_count, - sizeof(struct iwl_channel_info), - GFP_KERNEL); - if (!priv->channel_info) { - IWL_ERR(priv, "Could not allocate channel_info\n"); - priv->channel_count = 0; - return -ENOMEM; - } - - ch_info = priv->channel_info; - - /* Loop through the 5 EEPROM bands adding them in order to the - * channel map we maintain (that contains additional information than - * what just in the EEPROM) */ - for (band = 1; band <= 5; band++) { - - iwl_init_band_reference(priv, band, &eeprom_ch_count, - &eeprom_ch_info, &eeprom_ch_index); - - /* Loop through each band adding each of the channels */ - for (ch = 0; ch < eeprom_ch_count; ch++) { - ch_info->channel = eeprom_ch_index[ch]; - ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ : - IEEE80211_BAND_5GHZ; - - /* permanently store EEPROM's channel regulatory flags - * and max power in channel info database. */ - ch_info->eeprom = eeprom_ch_info[ch]; - - /* Copy the run-time flags so they are there even on - * invalid channels */ - ch_info->flags = eeprom_ch_info[ch].flags; - /* First write that ht40 is not enabled, and then enable - * one by one */ - ch_info->ht40_extension_channel = - IEEE80211_CHAN_NO_HT40; - - if (!(is_channel_valid(ch_info))) { - IWL_DEBUG_EEPROM(priv, - "Ch. %d Flags %x [%sGHz] - " - "No traffic\n", - ch_info->channel, - ch_info->flags, - is_channel_a_band(ch_info) ? - "5.2" : "2.4"); - ch_info++; - continue; - } - - /* Initialize regulatory-based run-time data */ - ch_info->max_power_avg = ch_info->curr_txpow = - eeprom_ch_info[ch].max_power_avg; - ch_info->scan_power = eeprom_ch_info[ch].max_power_avg; - ch_info->min_power = 0; - - IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] " - "%s%s%s%s%s%s(0x%02x %ddBm):" - " Ad-Hoc %ssupported\n", - ch_info->channel, - is_channel_a_band(ch_info) ? - "5.2" : "2.4", - CHECK_AND_PRINT_I(VALID), - CHECK_AND_PRINT_I(IBSS), - CHECK_AND_PRINT_I(ACTIVE), - CHECK_AND_PRINT_I(RADAR), - CHECK_AND_PRINT_I(WIDE), - CHECK_AND_PRINT_I(DFS), - eeprom_ch_info[ch].flags, - eeprom_ch_info[ch].max_power_avg, - ((eeprom_ch_info[ch]. - flags & EEPROM_CHANNEL_IBSS) - && !(eeprom_ch_info[ch]. - flags & EEPROM_CHANNEL_RADAR)) - ? "" : "not "); - - ch_info++; - } - } - - /* Check if we do have HT40 channels */ - if (cfg(priv)->lib->eeprom_ops.regulatory_bands[5] == - EEPROM_REGULATORY_BAND_NO_HT40 && - cfg(priv)->lib->eeprom_ops.regulatory_bands[6] == - EEPROM_REGULATORY_BAND_NO_HT40) - return 0; - - /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */ - for (band = 6; band <= 7; band++) { - enum ieee80211_band ieeeband; - - iwl_init_band_reference(priv, band, &eeprom_ch_count, - &eeprom_ch_info, &eeprom_ch_index); - - /* EEPROM band 6 is 2.4, band 7 is 5 GHz */ - ieeeband = - (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; - - /* Loop through each band adding each of the channels */ - for (ch = 0; ch < eeprom_ch_count; ch++) { - /* Set up driver's info for lower half */ - iwl_mod_ht40_chan_info(priv, ieeeband, - eeprom_ch_index[ch], - &eeprom_ch_info[ch], - IEEE80211_CHAN_NO_HT40PLUS); - - /* Set up driver's info for upper half */ - iwl_mod_ht40_chan_info(priv, ieeeband, - eeprom_ch_index[ch] + 4, - &eeprom_ch_info[ch], - IEEE80211_CHAN_NO_HT40MINUS); - } - } - - /* for newer device (6000 series and up) - * EEPROM contain enhanced tx power information - * driver need to process addition information - * to determine the max channel tx power limits - */ - if (cfg(priv)->lib->eeprom_ops.enhanced_txpower) - iwl_eeprom_enhanced_txpower(priv); - - return 0; -} - -/* - * iwl_free_channel_map - undo allocations in iwl_init_channel_map - */ -void iwl_free_channel_map(struct iwl_priv *priv) -{ - kfree(priv->channel_info); - priv->channel_count = 0; -} - -/** - * iwl_get_channel_info - Find driver's private channel info - * - * Based on band and channel number. - */ -const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv, - enum ieee80211_band band, u16 channel) -{ - int i; - - switch (band) { - case IEEE80211_BAND_5GHZ: - for (i = 14; i < priv->channel_count; i++) { - if (priv->channel_info[i].channel == channel) - return &priv->channel_info[i]; - } - break; - case IEEE80211_BAND_2GHZ: - if (channel >= 1 && channel <= 14) - return &priv->channel_info[channel - 1]; - break; - default: - BUG(); - } - - return NULL; -} - -void iwl_rf_config(struct iwl_priv *priv) -{ - u16 radio_cfg; - - radio_cfg = iwl_eeprom_query16(priv->shrd, EEPROM_RADIO_CONFIG); - - /* write radio config values to register */ - if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) { - iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG, - EEPROM_RF_CFG_TYPE_MSK(radio_cfg) | - EEPROM_RF_CFG_STEP_MSK(radio_cfg) | - EEPROM_RF_CFG_DASH_MSK(radio_cfg)); - IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n", - EEPROM_RF_CFG_TYPE_MSK(radio_cfg), - EEPROM_RF_CFG_STEP_MSK(radio_cfg), - EEPROM_RF_CFG_DASH_MSK(radio_cfg)); - } else - WARN_ON(1); - - /* set CSR_HW_CONFIG_REG for uCode use */ - iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | - CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-eeprom.h deleted file mode 100644 index e4a75834..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-eeprom.h +++ /dev/null @@ -1,322 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_eeprom_h__ -#define __iwl_eeprom_h__ - -#include <net/mac80211.h> - -struct iwl_priv; -struct iwl_shared; -struct iwl_trans; - -/* - * EEPROM access time values: - * - * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. - * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). - * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. - * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. - */ -#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ - -#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ -#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ - - -/* - * Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags. - * - * IBSS and/or AP operation is allowed *only* on those channels with - * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because - * RADAR detection is not supported by the 4965 driver, but is a - * requirement for establishing a new network for legal operation on channels - * requiring RADAR detection or restricting ACTIVE scanning. - * - * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. - * It only indicates that 20 MHz channel use is supported; HT40 channel - * usage is indicated by a separate set of regulatory flags for each - * HT40 channel pair. - * - * NOTE: Using a channel inappropriately will result in a uCode error! - */ -#define IWL_NUM_TX_CALIB_GROUPS 5 -enum { - EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */ - EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */ - /* Bit 2 Reserved */ - EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ - EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ - EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ - /* Bit 6 Reserved (was Narrow Channel) */ - EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ -}; - -/* SKU Capabilities */ -#define EEPROM_SKU_CAP_BAND_24GHZ (1 << 4) -#define EEPROM_SKU_CAP_BAND_52GHZ (1 << 5) -#define EEPROM_SKU_CAP_11N_ENABLE (1 << 6) -#define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7) -#define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8) - -/* *regulatory* channel data format in eeprom, one for each channel. - * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ -struct iwl_eeprom_channel { - u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ - s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ -} __packed; - -enum iwl_eeprom_enhanced_txpwr_flags { - IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), - IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), - IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), - IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), - IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), - IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), - IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), - IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), -}; - -/** - * iwl_eeprom_enhanced_txpwr structure - * This structure presents the enhanced regulatory tx power limit layout - * in eeprom image - * Enhanced regulatory tx power portion of eeprom image can be broken down - * into individual structures; each one is 8 bytes in size and contain the - * following information - * @flags: entry flags - * @channel: channel number - * @chain_a_max_pwr: chain a max power in 1/2 dBm - * @chain_b_max_pwr: chain b max power in 1/2 dBm - * @chain_c_max_pwr: chain c max power in 1/2 dBm - * @delta_20_in_40: 20-in-40 deltas (hi/lo) - * @mimo2_max_pwr: mimo2 max power in 1/2 dBm - * @mimo3_max_pwr: mimo3 max power in 1/2 dBm - * - */ -struct iwl_eeprom_enhanced_txpwr { - u8 flags; - u8 channel; - s8 chain_a_max; - s8 chain_b_max; - s8 chain_c_max; - u8 delta_20_in_40; - s8 mimo2_max; - s8 mimo3_max; -} __packed; - -/* calibration */ -struct iwl_eeprom_calib_hdr { - u8 version; - u8 pa_type; - __le16 voltage; -} __packed; - -#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) -#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL) - -/* temperature */ -#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL) -#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL) - - -/* agn links */ -#define EEPROM_LINK_HOST (2*0x64) -#define EEPROM_LINK_GENERAL (2*0x65) -#define EEPROM_LINK_REGULATORY (2*0x66) -#define EEPROM_LINK_CALIBRATION (2*0x67) -#define EEPROM_LINK_PROCESS_ADJST (2*0x68) -#define EEPROM_LINK_OTHERS (2*0x69) -#define EEPROM_LINK_TXP_LIMIT (2*0x6a) -#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) - -/* agn regulatory - indirect access */ -#define EEPROM_REG_BAND_1_CHANNELS ((0x08)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */ -#define EEPROM_REG_BAND_2_CHANNELS ((0x26)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */ -#define EEPROM_REG_BAND_3_CHANNELS ((0x42)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ -#define EEPROM_REG_BAND_4_CHANNELS ((0x5C)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ -#define EEPROM_REG_BAND_5_CHANNELS ((0x74)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ -#define EEPROM_REG_BAND_24_HT40_CHANNELS ((0x82)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ -#define EEPROM_REG_BAND_52_HT40_CHANNELS ((0x92)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ - -/* 6000 regulatory - indirect access */ -#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\ - | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ - -/* 5000 Specific */ -#define EEPROM_5000_TX_POWER_VERSION (4) -#define EEPROM_5000_EEPROM_VERSION (0x11A) - -/* 5050 Specific */ -#define EEPROM_5050_TX_POWER_VERSION (4) -#define EEPROM_5050_EEPROM_VERSION (0x21E) - -/* 1000 Specific */ -#define EEPROM_1000_TX_POWER_VERSION (4) -#define EEPROM_1000_EEPROM_VERSION (0x15C) - -/* 6x00 Specific */ -#define EEPROM_6000_TX_POWER_VERSION (4) -#define EEPROM_6000_EEPROM_VERSION (0x423) - -/* 6x50 Specific */ -#define EEPROM_6050_TX_POWER_VERSION (4) -#define EEPROM_6050_EEPROM_VERSION (0x532) - -/* 6150 Specific */ -#define EEPROM_6150_TX_POWER_VERSION (6) -#define EEPROM_6150_EEPROM_VERSION (0x553) - -/* 6x05 Specific */ -#define EEPROM_6005_TX_POWER_VERSION (6) -#define EEPROM_6005_EEPROM_VERSION (0x709) - -/* 6x30 Specific */ -#define EEPROM_6030_TX_POWER_VERSION (6) -#define EEPROM_6030_EEPROM_VERSION (0x709) - -/* 2x00 Specific */ -#define EEPROM_2000_TX_POWER_VERSION (6) -#define EEPROM_2000_EEPROM_VERSION (0x805) - -/* 6x35 Specific */ -#define EEPROM_6035_TX_POWER_VERSION (6) -#define EEPROM_6035_EEPROM_VERSION (0x753) - - -/* OTP */ -/* lower blocks contain EEPROM image and calibration data */ -#define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ -/* high blocks contain PAPD data */ -#define OTP_HIGH_IMAGE_SIZE_6x00 (6 * 512 * sizeof(u16)) /* 6 KB */ -#define OTP_HIGH_IMAGE_SIZE_1000 (0x200 * sizeof(u16)) /* 1024 bytes */ -#define OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */ -#define OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */ -#define OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */ -#define OTP_MAX_LL_ITEMS_2x00 (4) /* OTP blocks for 2x00 */ - -/* 2.4 GHz */ -extern const u8 iwl_eeprom_band_1[14]; - -#define ADDRESS_MSK 0x0000FFFF -#define INDIRECT_TYPE_MSK 0x000F0000 -#define INDIRECT_HOST 0x00010000 -#define INDIRECT_GENERAL 0x00020000 -#define INDIRECT_REGULATORY 0x00030000 -#define INDIRECT_CALIBRATION 0x00040000 -#define INDIRECT_PROCESS_ADJST 0x00050000 -#define INDIRECT_OTHERS 0x00060000 -#define INDIRECT_TXP_LIMIT 0x00070000 -#define INDIRECT_TXP_LIMIT_SIZE 0x00080000 -#define INDIRECT_ADDRESS 0x00100000 - -/* General */ -#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ -#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */ -#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ -#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ -#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ -#define EEPROM_VERSION (2*0x44) /* 2 bytes */ -#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ -#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ -#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ -#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ - -/* The following masks are to be applied on EEPROM_RADIO_CONFIG */ -#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ -#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ -#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ -#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ -#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ -#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ - -#define EEPROM_RF_CONFIG_TYPE_MAX 0x3 - -#define EEPROM_REGULATORY_BAND_NO_HT40 (0) - -struct iwl_eeprom_ops { - const u32 regulatory_bands[7]; - bool enhanced_txpower; -}; - - -int iwl_eeprom_init(struct iwl_trans *trans, u32 hw_rev); -void iwl_eeprom_free(struct iwl_shared *shrd); -int iwl_eeprom_check_version(struct iwl_priv *priv); -int iwl_eeprom_init_hw_params(struct iwl_priv *priv); -const u8 *iwl_eeprom_query_addr(const struct iwl_shared *shrd, size_t offset); -u16 iwl_eeprom_query16(const struct iwl_shared *shrd, size_t offset); -int iwl_init_channel_map(struct iwl_priv *priv); -void iwl_free_channel_map(struct iwl_priv *priv); -const struct iwl_channel_info *iwl_get_channel_info( - const struct iwl_priv *priv, - enum ieee80211_band band, u16 channel); -void iwl_rf_config(struct iwl_priv *priv); - -#endif /* __iwl_eeprom_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fh.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fh.h deleted file mode 100644 index 74bce97a..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fh.h +++ /dev/null @@ -1,533 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_fh_h__ -#define __iwl_fh_h__ - -#include <linux/types.h> - -/****************************/ -/* Flow Handler Definitions */ -/****************************/ - -/** - * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) - * Addresses are offsets from device's PCI hardware base address. - */ -#define FH_MEM_LOWER_BOUND (0x1000) -#define FH_MEM_UPPER_BOUND (0x2000) - -/** - * Keep-Warm (KW) buffer base address. - * - * Driver must allocate a 4KByte buffer that is for keeping the - * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency - * DRAM access when doing Txing or Rxing. The dummy accesses prevent host - * from going into a power-savings mode that would cause higher DRAM latency, - * and possible data over/under-runs, before all Tx/Rx is complete. - * - * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) - * of the buffer, which must be 4K aligned. Once this is set up, the device - * automatically invokes keep-warm accesses when normal accesses might not - * be sufficient to maintain fast DRAM response. - * - * Bit fields: - * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned - */ -#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) - - -/** - * TFD Circular Buffers Base (CBBC) addresses - * - * Device has 16 base pointer registers, one for each of 16 host-DRAM-resident - * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs) - * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 - * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte - * aligned (address bits 0-7 must be 0). - * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers - * for them are in different places. - * - * Bit fields in each pointer register: - * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned - */ -#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) -#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) -#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) -#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) - -/* Find TFD CB base pointer for given queue */ -static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) -{ - if (chnl < 16) - return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; - if (chnl < 20) - return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); - WARN_ON_ONCE(chnl >= 32); - return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); -} - - -/** - * Rx SRAM Control and Status Registers (RSCSR) - * - * These registers provide handshake between driver and device for the Rx queue - * (this queue handles *all* command responses, notifications, Rx data, etc. - * sent from uCode to host driver). Unlike Tx, there is only one Rx - * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can - * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer - * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1 - * mapping between RBDs and RBs. - * - * Driver must allocate host DRAM memory for the following, and set the - * physical address of each into device registers: - * - * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256 - * entries (although any power of 2, up to 4096, is selectable by driver). - * Each entry (1 dword) points to a receive buffer (RB) of consistent size - * (typically 4K, although 8K or 16K are also selectable by driver). - * Driver sets up RB size and number of RBDs in the CB via Rx config - * register FH_MEM_RCSR_CHNL0_CONFIG_REG. - * - * Bit fields within one RBD: - * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned - * - * Driver sets physical address [35:8] of base of RBD circular buffer - * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. - * - * 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers - * (RBs) have been filled, via a "write pointer", actually the index of - * the RB's corresponding RBD within the circular buffer. Driver sets - * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. - * - * Bit fields in lower dword of Rx status buffer (upper dword not used - * by driver: - * 31-12: Not used by driver - * 11- 0: Index of last filled Rx buffer descriptor - * (device writes, driver reads this value) - * - * As the driver prepares Receive Buffers (RBs) for device to fill, driver must - * enter pointers to these RBs into contiguous RBD circular buffer entries, - * and update the device's "write" index register, - * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. - * - * This "write" index corresponds to the *next* RBD that the driver will make - * available, i.e. one RBD past the tail of the ready-to-fill RBDs within - * the circular buffer. This value should initially be 0 (before preparing any - * RBs), should be 8 after preparing the first 8 RBs (for example), and must - * wrap back to 0 at the end of the circular buffer (but don't wrap before - * "read" index has advanced past 1! See below). - * NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8. - * - * As the device fills RBs (referenced from contiguous RBDs within the circular - * buffer), it updates the Rx status buffer in host DRAM, 2) described above, - * to tell the driver the index of the latest filled RBD. The driver must - * read this "read" index from DRAM after receiving an Rx interrupt from device - * - * The driver must also internally keep track of a third index, which is the - * next RBD to process. When receiving an Rx interrupt, driver should process - * all filled but unprocessed RBs up to, but not including, the RB - * corresponding to the "read" index. For example, if "read" index becomes "1", - * driver may process the RB pointed to by RBD 0. Depending on volume of - * traffic, there may be many RBs to process. - * - * If read index == write index, device thinks there is no room to put new data. - * Due to this, the maximum number of filled RBs is 255, instead of 256. To - * be safe, make sure that there is a gap of at least 2 RBDs between "write" - * and "read" indexes; that is, make sure that there are no more than 254 - * buffers waiting to be filled. - */ -#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) -#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) - -/** - * Physical base address of 8-byte Rx Status buffer. - * Bit fields: - * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. - */ -#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) - -/** - * Physical base address of Rx Buffer Descriptor Circular Buffer. - * Bit fields: - * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. - */ -#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) - -/** - * Rx write pointer (index, really!). - * Bit fields: - * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. - * NOTE: For 256-entry circular buffer, use only bits [7:0]. - */ -#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) -#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) - - -/** - * Rx Config/Status Registers (RCSR) - * Rx Config Reg for channel 0 (only channel used) - * - * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for - * normal operation (see bit fields). - * - * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. - * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for - * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. - * - * Bit fields: - * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29-24: reserved - * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal), - * min "5" for 32 RBDs, max "12" for 4096 RBDs. - * 19-18: reserved - * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K, - * '10' 12K, '11' 16K. - * 15-14: reserved - * 13-12: IRQ destination; '00' none, '01' host driver (normal operation) - * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec) - * typical value 0x10 (about 1/2 msec) - * 3- 0: reserved - */ -#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) -#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) - -#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) - -#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ -#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ -#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ - -#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) -#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) -#define RX_RB_TIMEOUT (0x10) - -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) - -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) - -#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) - -/** - * Rx Shared Status Registers (RSSR) - * - * After stopping Rx DMA channel (writing 0 to - * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll - * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. - * - * Bit fields: - * 24: 1 = Channel 0 is idle - * - * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV - * contain default values that should not be altered by the driver. - */ -#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) -#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) - -#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) -#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) -#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ - (FH_MEM_RSSR_LOWER_BOUND + 0x008) - -#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) - -#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 - -/* TFDB Area - TFDs buffer table */ -#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) -#define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900) -#define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958) -#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) -#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) - -/** - * Transmit DMA Channel Control/Status Registers (TCSR) - * - * Device has one configuration register for each of 8 Tx DMA/FIFO channels - * supported in hardware (don't confuse these with the 16 Tx queues in DRAM, - * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. - * - * To use a Tx DMA channel, driver must initialize its - * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: - * - * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL - * - * All other bits should be 0. - * - * Bit fields: - * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame, - * '10' operate normally - * 29- 4: Reserved, set to "0" - * 3: Enable internal DMA requests (1, normal operation), disable (0) - * 2- 0: Reserved, set to "0" - */ -#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) -#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) - -/* Find Control/Status reg for given Tx DMA/FIFO channel */ -#define FH_TCSR_CHNL_NUM (8) - -/* TCSR: tx_config register values */ -#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ - (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) -#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ - (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) -#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ - (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) - -#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) - -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) - -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) - -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) - -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) - -#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) - -#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) - -/** - * Tx Shared Status Registers (TSSR) - * - * After stopping Tx DMA channel (writing 0 to - * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll - * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle - * (channel's buffers empty | no pending requests). - * - * Bit fields: - * 31-24: 1 = Channel buffers empty (channel 7:0) - * 23-16: 1 = No pending requests (channel 7:0) - */ -#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) -#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) - -#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) - -/** - * Bit fields for TSSR(Tx Shared Status & Control) error status register: - * 31: Indicates an address error when accessed to internal memory - * uCode/driver must write "1" in order to clear this flag - * 30: Indicates that Host did not send the expected number of dwords to FH - * uCode/driver must write "1" in order to clear this flag - * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA - * command was received from the scheduler while the TRB was already full - * with previous command - * uCode/driver must write "1" in order to clear this flag - * 7-0: Each status bit indicates a channel's TxCredit error. When an error - * bit is set, it indicates that the FH has received a full indication - * from the RTC TxFIFO and the current value of the TxCredit counter was - * not equal to zero. This mean that the credit mechanism was not - * synchronized to the TxFIFO status - * uCode/driver must write "1" in order to clear this flag - */ -#define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018) - -#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) - -/* Tx service channels */ -#define FH_SRVC_CHNL (9) -#define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8) -#define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ - (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) - -#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98) -/* Instruct FH to increment the retry count of a packet when - * it is brought from the memory to TX-FIFO - */ -#define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) - -#define RX_QUEUE_SIZE 256 -#define RX_QUEUE_MASK 255 -#define RX_QUEUE_SIZE_LOG 8 - -/* - * RX related structures and functions - */ -#define RX_FREE_BUFFERS 64 -#define RX_LOW_WATERMARK 8 - -/** - * struct iwl_rb_status - reseve buffer status - * host memory mapped FH registers - * @closed_rb_num [0:11] - Indicates the index of the RB which was closed - * @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed - * @finished_rb_num [0:11] - Indicates the index of the current RB - * in which the last frame was written to - * @finished_fr_num [0:11] - Indicates the index of the RX Frame - * which was transferred - */ -struct iwl_rb_status { - __le16 closed_rb_num; - __le16 closed_fr_num; - __le16 finished_rb_num; - __le16 finished_fr_nam; - __le32 __unused; -} __packed; - - -#define TFD_QUEUE_SIZE_MAX (256) -#define TFD_QUEUE_SIZE_BC_DUP (64) -#define TFD_QUEUE_BC_SIZE (TFD_QUEUE_SIZE_MAX + TFD_QUEUE_SIZE_BC_DUP) -#define IWL_TX_DMA_MASK DMA_BIT_MASK(36) -#define IWL_NUM_OF_TBS 20 - -static inline u8 iwl_get_dma_hi_addr(dma_addr_t addr) -{ - return (sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0) & 0xF; -} -/** - * struct iwl_tfd_tb transmit buffer descriptor within transmit frame descriptor - * - * This structure contains dma address and length of transmission address - * - * @lo: low [31:0] portion of the dma address of TX buffer - * every even is unaligned on 16 bit boundary - * @hi_n_len 0-3 [35:32] portion of dma - * 4-15 length of the tx buffer - */ -struct iwl_tfd_tb { - __le32 lo; - __le16 hi_n_len; -} __packed; - -/** - * struct iwl_tfd - * - * Transmit Frame Descriptor (TFD) - * - * @ __reserved1[3] reserved - * @ num_tbs 0-4 number of active tbs - * 5 reserved - * 6-7 padding (not used) - * @ tbs[20] transmit frame buffer descriptors - * @ __pad padding - * - * Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM. - * Both driver and device share these circular buffers, each of which must be - * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes - * - * Driver must indicate the physical address of the base of each - * circular buffer via the FH_MEM_CBBC_QUEUE registers. - * - * Each TFD contains pointer/size information for up to 20 data buffers - * in host DRAM. These buffers collectively contain the (one) frame described - * by the TFD. Each buffer must be a single contiguous block of memory within - * itself, but buffers may be scattered in host DRAM. Each buffer has max size - * of (4K - 4). The concatenates all of a TFD's buffers into a single - * Tx frame, up to 8 KBytes in size. - * - * A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx. - */ -struct iwl_tfd { - u8 __reserved1[3]; - u8 num_tbs; - struct iwl_tfd_tb tbs[IWL_NUM_OF_TBS]; - __le32 __pad; -} __packed; - -/* Keep Warm Size */ -#define IWL_KW_SIZE 0x1000 /* 4k */ - -/* Fixed (non-configurable) rx data from phy */ - -/** - * struct iwlagn_schedq_bc_tbl scheduler byte count table - * base physical address provided by SCD_DRAM_BASE_ADDR - * @tfd_offset 0-12 - tx command byte count - * 12-16 - station index - */ -struct iwlagn_scd_bc_tbl { - __le16 tfd_offset[TFD_QUEUE_BC_SIZE]; -} __packed; - -#endif /* !__iwl_fh_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fw-file.h deleted file mode 100644 index c924ccb9..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ /dev/null @@ -1,165 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_fw_file_h__ -#define __iwl_fw_file_h__ - -#include <linux/netdevice.h> - -/* v1/v2 uCode file layout */ -struct iwl_ucode_header { - __le32 ver; /* major/minor/API/serial */ - union { - struct { - __le32 inst_size; /* bytes of runtime code */ - __le32 data_size; /* bytes of runtime data */ - __le32 init_size; /* bytes of init code */ - __le32 init_data_size; /* bytes of init data */ - __le32 boot_size; /* bytes of bootstrap code */ - u8 data[0]; /* in same order as sizes */ - } v1; - struct { - __le32 build; /* build number */ - __le32 inst_size; /* bytes of runtime code */ - __le32 data_size; /* bytes of runtime data */ - __le32 init_size; /* bytes of init code */ - __le32 init_data_size; /* bytes of init data */ - __le32 boot_size; /* bytes of bootstrap code */ - u8 data[0]; /* in same order as sizes */ - } v2; - } u; -}; - -/* - * new TLV uCode file layout - * - * The new TLV file format contains TLVs, that each specify - * some piece of data. To facilitate "groups", for example - * different instruction image with different capabilities, - * bundled with the same init image, an alternative mechanism - * is provided: - * When the alternative field is 0, that means that the item - * is always valid. When it is non-zero, then it is only - * valid in conjunction with items of the same alternative, - * in which case the driver (user) selects one alternative - * to use. - */ - -enum iwl_ucode_tlv_type { - IWL_UCODE_TLV_INVALID = 0, /* unused */ - IWL_UCODE_TLV_INST = 1, - IWL_UCODE_TLV_DATA = 2, - IWL_UCODE_TLV_INIT = 3, - IWL_UCODE_TLV_INIT_DATA = 4, - IWL_UCODE_TLV_BOOT = 5, - IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */ - IWL_UCODE_TLV_PAN = 7, - IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8, - IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, - IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10, - IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11, - IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, - IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, - IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, - IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, - IWL_UCODE_TLV_WOWLAN_INST = 16, - IWL_UCODE_TLV_WOWLAN_DATA = 17, - IWL_UCODE_TLV_FLAGS = 18, - IWL_UCODE_TLV_SEC_RT = 19, - IWL_UCODE_TLV_SEC_INIT = 20, - IWL_UCODE_TLV_SEC_WOWLAN = 21, - IWL_UCODE_TLV_DEF_CALIB = 22, - IWL_UCODE_TLV_PHY_SKU = 23, -}; - -struct iwl_ucode_tlv { - __le16 type; /* see above */ - __le16 alternative; /* see comment */ - __le32 length; /* not including type/length fields */ - u8 data[0]; -}; - -#define IWL_TLV_UCODE_MAGIC 0x0a4c5749 - -struct iwl_tlv_ucode_header { - /* - * The TLV style ucode header is distinguished from - * the v1/v2 style header by first four bytes being - * zero, as such is an invalid combination of - * major/minor/API/serial versions. - */ - __le32 zero; - __le32 magic; - u8 human_readable[64]; - __le32 ver; /* major/minor/API/serial */ - __le32 build; - __le64 alternatives; /* bitmask of valid alternatives */ - /* - * The data contained herein has a TLV layout, - * see above for the TLV header and types. - * Note that each TLV is padded to a length - * that is a multiple of 4 for alignment. - */ - u8 data[0]; -}; - -#endif /* __iwl_fw_file_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fw.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fw.h deleted file mode 100644 index 8e36bdc1..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-fw.h +++ /dev/null @@ -1,177 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_fw_h__ -#define __iwl_fw_h__ -#include <linux/types.h> - -/** - * enum iwl_ucode_tlv_flag - ucode API flags - * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously - * was a separate TLV but moved here to save space. - * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, - * treats good CRC threshold as a boolean - * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). - * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. - */ -enum iwl_ucode_tlv_flag { - IWL_UCODE_TLV_FLAGS_PAN = BIT(0), - IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), - IWL_UCODE_TLV_FLAGS_MFP = BIT(2), - IWL_UCODE_TLV_FLAGS_P2P = BIT(3), -}; - -/* The default calibrate table size if not specified by firmware file */ -#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 -#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 -#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 - -/** - * enum iwl_ucode_type - * - * The type of ucode. - * - * @IWL_UCODE_REGULAR: Normal runtime ucode - * @IWL_UCODE_INIT: Initial ucode - * @IWL_UCODE_WOWLAN: Wake on Wireless enabled ucode - */ -enum iwl_ucode_type { - IWL_UCODE_REGULAR, - IWL_UCODE_INIT, - IWL_UCODE_WOWLAN, - IWL_UCODE_TYPE_MAX, -}; - -/* - * enumeration of ucode section. - * This enumeration is used for legacy tlv style (before 16.0 uCode). - */ -enum iwl_ucode_sec { - IWL_UCODE_SECTION_INST, - IWL_UCODE_SECTION_DATA, -}; -/* - * For 16.0 uCode and above, there is no differentiation between sections, - * just an offset to the HW address. - */ -#define IWL_UCODE_SECTION_MAX 4 - -struct iwl_ucode_capabilities { - u32 max_probe_length; - u32 standard_phy_calibration_size; - u32 flags; -}; - -/* one for each uCode image (inst/data, init/runtime/wowlan) */ -struct fw_desc { - dma_addr_t p_addr; /* hardware address */ - void *v_addr; /* software address */ - u32 len; /* size in bytes */ - u32 offset; /* offset in the device */ -}; - -struct fw_img { - struct fw_desc sec[IWL_UCODE_SECTION_MAX]; -}; - -/* uCode version contains 4 values: Major/Minor/API/Serial */ -#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) -#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) -#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) -#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) - -/** - * struct iwl_fw - variables associated with the firmware - * - * @ucode_ver: ucode version from the ucode file - * @fw_version: firmware version string - * @img: ucode image like ucode_rt, ucode_init, ucode_wowlan. - * @ucode_capa: capabilities parsed from the ucode file. - * @enhance_sensitivity_table: device can do enhanced sensitivity. - * @init_evtlog_ptr: event log offset for init ucode. - * @init_evtlog_size: event log size for init ucode. - * @init_errlog_ptr: error log offfset for init ucode. - * @inst_evtlog_ptr: event log offset for runtime ucode. - * @inst_evtlog_size: event log size for runtime ucode. - * @inst_errlog_ptr: error log offfset for runtime ucode. - */ -struct iwl_fw { - u32 ucode_ver; - - char fw_version[ETHTOOL_BUSINFO_LEN]; - - /* ucode images */ - struct fw_img img[IWL_UCODE_TYPE_MAX]; - - struct iwl_ucode_capabilities ucode_capa; - bool enhance_sensitivity_table; - - u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr; - u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr; - - u64 default_calib[IWL_UCODE_TYPE_MAX]; - u32 phy_config; - - bool mvm_fw; -}; - -#endif /* __iwl_fw_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-io.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-io.c deleted file mode 100644 index 081dd34d..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-io.c +++ /dev/null @@ -1,317 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/delay.h> -#include <linux/device.h> - -#include "iwl-io.h" -#include"iwl-csr.h" -#include "iwl-debug.h" - -#define IWL_POLL_INTERVAL 10 /* microseconds */ - -static inline void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - iwl_write32(trans, reg, iwl_read32(trans, reg) | mask); -} - -static inline void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - iwl_write32(trans, reg, iwl_read32(trans, reg) & ~mask); -} - -void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - __iwl_set_bit(trans, reg, mask); - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - __iwl_clear_bit(trans, reg, mask); - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -int iwl_poll_bit(struct iwl_trans *trans, u32 addr, - u32 bits, u32 mask, int timeout) -{ - int t = 0; - - do { - if ((iwl_read32(trans, addr) & mask) == (bits & mask)) - return t; - udelay(IWL_POLL_INTERVAL); - t += IWL_POLL_INTERVAL; - } while (t < timeout); - - return -ETIMEDOUT; -} - -int iwl_grab_nic_access_silent(struct iwl_trans *trans) -{ - int ret; - - lockdep_assert_held(&trans->reg_lock); - - /* this bit wakes up the NIC */ - __iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - /* - * These bits say the device is running, and should keep running for - * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), - * but they do not indicate that embedded SRAM is restored yet; - * 3945 and 4965 have volatile SRAM, and must save/restore contents - * to/from host DRAM when sleeping/waking for power-saving. - * Each direction takes approximately 1/4 millisecond; with this - * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a - * series of register accesses are expected (e.g. reading Event Log), - * to keep device from sleeping. - * - * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that - * SRAM is okay/restored. We don't check that here because this call - * is just for hardware register access; but GP1 MAC_SLEEP check is a - * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). - * - * 5000 series and later (including 1000 series) have non-volatile SRAM, - * and do not save/restore SRAM when power cycling. - */ - ret = iwl_poll_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, - (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | - CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000); - if (ret < 0) { - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI); - return -EIO; - } - - return 0; -} - -bool iwl_grab_nic_access(struct iwl_trans *trans) -{ - int ret = iwl_grab_nic_access_silent(trans); - if (unlikely(ret)) { - u32 val = iwl_read32(trans, CSR_GP_CNTRL); - WARN_ONCE(1, "Timeout waiting for hardware access " - "(CSR_GP_CNTRL 0x%08x)\n", val); - return false; - } - - return true; -} - -void iwl_release_nic_access(struct iwl_trans *trans) -{ - lockdep_assert_held(&trans->reg_lock); - __iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - /* - * Above we read the CSR_GP_CNTRL register, which will flush - * any previous writes, but we need the write that clears the - * MAC_ACCESS_REQ bit to be performed before any other writes - * scheduled on different CPUs (after we drop reg_lock). - */ - mmiowb(); -} - -u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg) -{ - u32 value; - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); - value = iwl_read32(trans, reg); - iwl_release_nic_access(trans); - spin_unlock_irqrestore(&trans->reg_lock, flags); - - return value; -} - -void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - iwl_write32(trans, reg, value); - iwl_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -int iwl_poll_direct_bit(struct iwl_trans *trans, u32 addr, u32 mask, - int timeout) -{ - int t = 0; - - do { - if ((iwl_read_direct32(trans, addr) & mask) == mask) - return t; - udelay(IWL_POLL_INTERVAL); - t += IWL_POLL_INTERVAL; - } while (t < timeout); - - return -ETIMEDOUT; -} - -static inline u32 __iwl_read_prph(struct iwl_trans *trans, u32 reg) -{ - iwl_write32(trans, HBUS_TARG_PRPH_RADDR, reg | (3 << 24)); - return iwl_read32(trans, HBUS_TARG_PRPH_RDAT); -} - -static inline void __iwl_write_prph(struct iwl_trans *trans, u32 addr, u32 val) -{ - iwl_write32(trans, HBUS_TARG_PRPH_WADDR, - ((addr & 0x0000FFFF) | (3 << 24))); - iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); -} - -u32 iwl_read_prph(struct iwl_trans *trans, u32 reg) -{ - unsigned long flags; - u32 val; - - spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); - val = __iwl_read_prph(trans, reg); - iwl_release_nic_access(trans); - spin_unlock_irqrestore(&trans->reg_lock, flags); - return val; -} - -void iwl_write_prph(struct iwl_trans *trans, u32 addr, u32 val) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - __iwl_write_prph(trans, addr, val); - iwl_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -void iwl_set_bits_prph(struct iwl_trans *trans, u32 reg, u32 mask) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - __iwl_write_prph(trans, reg, - __iwl_read_prph(trans, reg) | mask); - iwl_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 reg, - u32 bits, u32 mask) -{ - unsigned long flags; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - __iwl_write_prph(trans, reg, - (__iwl_read_prph(trans, reg) & mask) | bits); - iwl_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -void iwl_clear_bits_prph(struct iwl_trans *trans, u32 reg, u32 mask) -{ - unsigned long flags; - u32 val; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - val = __iwl_read_prph(trans, reg); - __iwl_write_prph(trans, reg, (val & ~mask)); - iwl_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -void _iwl_read_targ_mem_words(struct iwl_trans *trans, u32 addr, - void *buf, int words) -{ - unsigned long flags; - int offs; - u32 *vals = buf; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); - for (offs = 0; offs < words; offs++) - vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} - -u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr) -{ - u32 value; - - _iwl_read_targ_mem_words(trans, addr, &value, 1); - - return value; -} - -int _iwl_write_targ_mem_words(struct iwl_trans *trans, u32 addr, - void *buf, int words) -{ - unsigned long flags; - int offs, result = 0; - u32 *vals = buf; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { - iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); - for (offs = 0; offs < words; offs++) - iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); - iwl_release_nic_access(trans); - } else - result = -EBUSY; - spin_unlock_irqrestore(&trans->reg_lock, flags); - - return result; -} - -int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val) -{ - return _iwl_write_targ_mem_words(trans, addr, &val, 1); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-io.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-io.h deleted file mode 100644 index 09b85676..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-io.h +++ /dev/null @@ -1,93 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_io_h__ -#define __iwl_io_h__ - -#include "iwl-devtrace.h" -#include "iwl-shared.h" -#include "iwl-trans.h" - -static inline void iwl_write8(struct iwl_trans *trans, u32 ofs, u8 val) -{ - trace_iwlwifi_dev_iowrite8(trans->dev, ofs, val); - iwl_trans_write8(trans, ofs, val); -} - -static inline void iwl_write32(struct iwl_trans *trans, u32 ofs, u32 val) -{ - trace_iwlwifi_dev_iowrite32(trans->dev, ofs, val); - iwl_trans_write32(trans, ofs, val); -} - -static inline u32 iwl_read32(struct iwl_trans *trans, u32 ofs) -{ - u32 val = iwl_trans_read32(trans, ofs); - trace_iwlwifi_dev_ioread32(trans->dev, ofs, val); - return val; -} - -void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); -void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); - -int iwl_poll_bit(struct iwl_trans *trans, u32 addr, - u32 bits, u32 mask, int timeout); -int iwl_poll_direct_bit(struct iwl_trans *trans, u32 addr, u32 mask, - int timeout); - -int iwl_grab_nic_access_silent(struct iwl_trans *trans); -bool iwl_grab_nic_access(struct iwl_trans *trans); -void iwl_release_nic_access(struct iwl_trans *trans); - -u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg); -void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value); - - -u32 iwl_read_prph(struct iwl_trans *trans, u32 reg); -void iwl_write_prph(struct iwl_trans *trans, u32 addr, u32 val); -void iwl_set_bits_prph(struct iwl_trans *trans, u32 reg, u32 mask); -void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 reg, - u32 bits, u32 mask); -void iwl_clear_bits_prph(struct iwl_trans *trans, u32 reg, u32 mask); - -void _iwl_read_targ_mem_words(struct iwl_trans *trans, u32 addr, - void *buf, int words); - -#define iwl_read_targ_mem_words(trans, addr, buf, bufsize) \ - do { \ - BUILD_BUG_ON((bufsize) % sizeof(u32)); \ - _iwl_read_targ_mem_words(trans, addr, buf, \ - (bufsize) / sizeof(u32));\ - } while (0) - -int _iwl_write_targ_mem_words(struct iwl_trans *trans, u32 addr, - void *buf, int words); - -u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr); -int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val); -#endif diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-led.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-led.c deleted file mode 100644 index 1993a2b7..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-led.c +++ /dev/null @@ -1,226 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include <linux/etherdevice.h> -#include <asm/unaligned.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-agn.h" -#include "iwl-io.h" -#include "iwl-trans.h" -#include "iwl-shared.h" - -/* Throughput OFF time(ms) ON time (ms) - * >300 25 25 - * >200 to 300 40 40 - * >100 to 200 55 55 - * >70 to 100 65 65 - * >50 to 70 75 75 - * >20 to 50 85 85 - * >10 to 20 95 95 - * >5 to 10 110 110 - * >1 to 5 130 130 - * >0 to 1 167 167 - * <=0 SOLID ON - */ -static const struct ieee80211_tpt_blink iwl_blink[] = { - { .throughput = 0, .blink_time = 334 }, - { .throughput = 1 * 1024 - 1, .blink_time = 260 }, - { .throughput = 5 * 1024 - 1, .blink_time = 220 }, - { .throughput = 10 * 1024 - 1, .blink_time = 190 }, - { .throughput = 20 * 1024 - 1, .blink_time = 170 }, - { .throughput = 50 * 1024 - 1, .blink_time = 150 }, - { .throughput = 70 * 1024 - 1, .blink_time = 130 }, - { .throughput = 100 * 1024 - 1, .blink_time = 110 }, - { .throughput = 200 * 1024 - 1, .blink_time = 80 }, - { .throughput = 300 * 1024 - 1, .blink_time = 50 }, -}; - -/* Set led register off */ -void iwlagn_led_enable(struct iwl_priv *priv) -{ - iwl_write32(trans(priv), CSR_LED_REG, CSR_LED_REG_TRUN_ON); -} - -/* - * Adjust led blink rate to compensate on a MAC Clock difference on every HW - * Led blink rate analysis showed an average deviation of 20% on 5000 series - * and up. - * Need to compensate on the led on/off time per HW according to the deviation - * to achieve the desired led frequency - * The calculation is: (100-averageDeviation)/100 * blinkTime - * For code efficiency the calculation will be: - * compensation = (100 - averageDeviation) * 64 / 100 - * NewBlinkTime = (compensation * BlinkTime) / 64 - */ -static inline u8 iwl_blink_compensation(struct iwl_priv *priv, - u8 time, u16 compensation) -{ - if (!compensation) { - IWL_ERR(priv, "undefined blink compensation: " - "use pre-defined blinking time\n"); - return time; - } - - return (u8)((time * compensation) >> 6); -} - -static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_LEDS_CMD, - .len = { sizeof(struct iwl_led_cmd), }, - .data = { led_cmd, }, - .flags = CMD_ASYNC, - }; - u32 reg; - - reg = iwl_read32(trans(priv), CSR_LED_REG); - if (reg != (reg & CSR_LED_BSM_CTRL_MSK)) - iwl_write32(trans(priv), CSR_LED_REG, - reg & CSR_LED_BSM_CTRL_MSK); - - return iwl_dvm_send_cmd(priv, &cmd); -} - -/* Set led pattern command */ -static int iwl_led_cmd(struct iwl_priv *priv, - unsigned long on, - unsigned long off) -{ - struct iwl_led_cmd led_cmd = { - .id = IWL_LED_LINK, - .interval = IWL_DEF_LED_INTRVL - }; - int ret; - - if (!test_bit(STATUS_READY, &priv->status)) - return -EBUSY; - - if (priv->blink_on == on && priv->blink_off == off) - return 0; - - if (off == 0) { - /* led is SOLID_ON */ - on = IWL_LED_SOLID; - } - - IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n", - cfg(priv)->base_params->led_compensation); - led_cmd.on = iwl_blink_compensation(priv, on, - cfg(priv)->base_params->led_compensation); - led_cmd.off = iwl_blink_compensation(priv, off, - cfg(priv)->base_params->led_compensation); - - ret = iwl_send_led_cmd(priv, &led_cmd); - if (!ret) { - priv->blink_on = on; - priv->blink_off = off; - } - return ret; -} - -static void iwl_led_brightness_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led); - unsigned long on = 0; - - if (brightness > 0) - on = IWL_LED_SOLID; - - iwl_led_cmd(priv, on, 0); -} - -static int iwl_led_blink_set(struct led_classdev *led_cdev, - unsigned long *delay_on, - unsigned long *delay_off) -{ - struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led); - - return iwl_led_cmd(priv, *delay_on, *delay_off); -} - -void iwl_leds_init(struct iwl_priv *priv) -{ - int mode = iwlagn_mod_params.led_mode; - int ret; - - if (mode == IWL_LED_DISABLE) { - IWL_INFO(priv, "Led disabled\n"); - return; - } - if (mode == IWL_LED_DEFAULT) - mode = cfg(priv)->led_mode; - - priv->led.name = kasprintf(GFP_KERNEL, "%s-led", - wiphy_name(priv->hw->wiphy)); - priv->led.brightness_set = iwl_led_brightness_set; - priv->led.blink_set = iwl_led_blink_set; - priv->led.max_brightness = 1; - - switch (mode) { - case IWL_LED_DEFAULT: - WARN_ON(1); - break; - case IWL_LED_BLINK: - priv->led.default_trigger = - ieee80211_create_tpt_led_trigger(priv->hw, - IEEE80211_TPT_LEDTRIG_FL_CONNECTED, - iwl_blink, ARRAY_SIZE(iwl_blink)); - break; - case IWL_LED_RF_STATE: - priv->led.default_trigger = - ieee80211_get_radio_led_name(priv->hw); - break; - } - - ret = led_classdev_register(trans(priv)->dev, &priv->led); - if (ret) { - kfree(priv->led.name); - return; - } - - priv->led_registered = true; -} - -void iwl_leds_exit(struct iwl_priv *priv) -{ - if (!priv->led_registered) - return; - - led_classdev_unregister(&priv->led); - kfree(priv->led.name); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-led.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-led.h deleted file mode 100644 index b02a8531..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-led.h +++ /dev/null @@ -1,43 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#ifndef __iwl_leds_h__ -#define __iwl_leds_h__ - - -struct iwl_priv; - -#define IWL_LED_SOLID 11 -#define IWL_DEF_LED_INTRVL cpu_to_le32(1000) - -#define IWL_LED_ACTIVITY (0<<1) -#define IWL_LED_LINK (1<<1) - -void iwlagn_led_enable(struct iwl_priv *priv); -void iwl_leds_init(struct iwl_priv *priv); -void iwl_leds_exit(struct iwl_priv *priv); - -#endif /* __iwl_leds_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-mac80211.c deleted file mode 100644 index e0e6c674..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ /dev/null @@ -1,1615 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_arp.h> - -#include <net/mac80211.h> - -#include <asm/div64.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-calib.h" -#include "iwl-agn.h" -#include "iwl-shared.h" -#include "iwl-trans.h" -#include "iwl-op-mode.h" - -/***************************************************************************** - * - * mac80211 entry point functions - * - *****************************************************************************/ - -static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = { - { - .max = 1, - .types = BIT(NL80211_IFTYPE_STATION), - }, - { - .max = 1, - .types = BIT(NL80211_IFTYPE_AP), - }, -}; - -static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = { - { - .max = 2, - .types = BIT(NL80211_IFTYPE_STATION), - }, -}; - -static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = { - { - .max = 1, - .types = BIT(NL80211_IFTYPE_STATION), - }, - { - .max = 1, - .types = BIT(NL80211_IFTYPE_P2P_GO) | - BIT(NL80211_IFTYPE_AP), - }, -}; - -static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = { - { - .max = 2, - .types = BIT(NL80211_IFTYPE_STATION), - }, - { - .max = 1, - .types = BIT(NL80211_IFTYPE_P2P_CLIENT), - }, -}; - -static const struct ieee80211_iface_combination -iwlagn_iface_combinations_dualmode[] = { - { .num_different_channels = 1, - .max_interfaces = 2, - .beacon_int_infra_match = true, - .limits = iwlagn_sta_ap_limits, - .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits), - }, - { .num_different_channels = 1, - .max_interfaces = 2, - .limits = iwlagn_2sta_limits, - .n_limits = ARRAY_SIZE(iwlagn_2sta_limits), - }, -}; - -static const struct ieee80211_iface_combination -iwlagn_iface_combinations_p2p[] = { - { .num_different_channels = 1, - .max_interfaces = 2, - .beacon_int_infra_match = true, - .limits = iwlagn_p2p_sta_go_limits, - .n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits), - }, - { .num_different_channels = 1, - .max_interfaces = 2, - .limits = iwlagn_p2p_2sta_limits, - .n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits), - }, -}; - -/* - * Not a mac80211 entry point function, but it fits in with all the - * other mac80211 functions grouped here. - */ -int iwlagn_mac_setup_register(struct iwl_priv *priv, - const struct iwl_ucode_capabilities *capa) -{ - int ret; - struct ieee80211_hw *hw = priv->hw; - struct iwl_rxon_context *ctx; - - hw->rate_control_algorithm = "iwl-agn-rs"; - - /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_NEED_DTIM_PERIOD | - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; - - /* - * Including the following line will crash some AP's. This - * workaround removes the stimulus which causes the crash until - * the AP software can be fixed. - hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; - */ - - hw->flags |= IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_SUPPORTS_DYNAMIC_PS; - - if (hw_params(priv).sku & EEPROM_SKU_CAP_11N_ENABLE) - hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | - IEEE80211_HW_SUPPORTS_STATIC_SMPS; - -#ifndef CONFIG_IWLWIFI_EXPERIMENTAL_MFP - /* enable 11w if the uCode advertise */ - if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP) -#endif /* !CONFIG_IWLWIFI_EXPERIMENTAL_MFP */ - hw->flags |= IEEE80211_HW_MFP_CAPABLE; - - hw->sta_data_size = sizeof(struct iwl_station_priv); - hw->vif_data_size = sizeof(struct iwl_vif_priv); - - for_each_context(priv, ctx) { - hw->wiphy->interface_modes |= ctx->interface_modes; - hw->wiphy->interface_modes |= ctx->exclusive_interface_modes; - } - - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - - if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) { - hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p; - hw->wiphy->n_iface_combinations = - ARRAY_SIZE(iwlagn_iface_combinations_p2p); - } else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { - hw->wiphy->iface_combinations = - iwlagn_iface_combinations_dualmode; - hw->wiphy->n_iface_combinations = - ARRAY_SIZE(iwlagn_iface_combinations_dualmode); - } - - hw->wiphy->max_remain_on_channel_duration = 1000; - - hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY | - WIPHY_FLAG_DISABLE_BEACON_HINTS | - WIPHY_FLAG_IBSS_RSN; - -#ifdef CONFIG_PM_SLEEP - if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && - trans(priv)->ops->wowlan_suspend && - device_can_wakeup(trans(priv)->dev)) { - hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | - WIPHY_WOWLAN_DISCONNECT | - WIPHY_WOWLAN_EAP_IDENTITY_REQ | - WIPHY_WOWLAN_RFKILL_RELEASE; - if (!iwlagn_mod_params.sw_crypto) - hw->wiphy->wowlan.flags |= - WIPHY_WOWLAN_SUPPORTS_GTK_REKEY | - WIPHY_WOWLAN_GTK_REKEY_FAILURE; - - hw->wiphy->wowlan.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS; - hw->wiphy->wowlan.pattern_min_len = - IWLAGN_WOWLAN_MIN_PATTERN_LEN; - hw->wiphy->wowlan.pattern_max_len = - IWLAGN_WOWLAN_MAX_PATTERN_LEN; - } -#endif - - if (iwlagn_mod_params.power_save) - hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT; - else - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; - /* we create the 802.11 header and a zero-length SSID element */ - hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2; - - /* Default value; 4 EDCA QOS priorities */ - hw->queues = 4; - - hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; - - if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &priv->bands[IEEE80211_BAND_2GHZ]; - if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) - priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &priv->bands[IEEE80211_BAND_5GHZ]; - - hw->wiphy->hw_version = trans(priv)->hw_id; - - iwl_leds_init(priv); - - ret = ieee80211_register_hw(priv->hw); - if (ret) { - IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); - iwl_leds_exit(priv); - return ret; - } - priv->mac80211_registered = 1; - - return 0; -} - -void iwlagn_mac_unregister(struct iwl_priv *priv) -{ - if (!priv->mac80211_registered) - return; - iwl_leds_exit(priv); - ieee80211_unregister_hw(priv->hw); - priv->mac80211_registered = 0; -} - -static int __iwl_up(struct iwl_priv *priv) -{ - struct iwl_rxon_context *ctx; - int ret; - - lockdep_assert_held(&priv->mutex); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_WARN(priv, "Exit pending; will not bring the NIC up\n"); - return -EIO; - } - - for_each_context(priv, ctx) { - ret = iwlagn_alloc_bcast_station(priv, ctx); - if (ret) { - iwl_dealloc_bcast_stations(priv); - return ret; - } - } - - ret = iwl_run_init_ucode(priv); - if (ret) { - IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret); - goto error; - } - - ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR); - if (ret) { - IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret); - goto error; - } - - ret = iwl_alive_start(priv); - if (ret) - goto error; - return 0; - - error: - set_bit(STATUS_EXIT_PENDING, &priv->status); - iwl_down(priv); - clear_bit(STATUS_EXIT_PENDING, &priv->status); - - IWL_ERR(priv, "Unable to initialize device.\n"); - return ret; -} - -static int iwlagn_mac_start(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - /* we should be verifying the device is ready to be opened */ - mutex_lock(&priv->mutex); - ret = __iwl_up(priv); - mutex_unlock(&priv->mutex); - if (ret) - return ret; - - IWL_DEBUG_INFO(priv, "Start UP work done.\n"); - - /* Now we should be done, and the READY bit should be set. */ - if (WARN_ON(!test_bit(STATUS_READY, &priv->status))) - ret = -EIO; - - iwlagn_led_enable(priv); - - priv->is_open = 1; - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; -} - -static void iwlagn_mac_stop(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!priv->is_open) - return; - - priv->is_open = 0; - - mutex_lock(&priv->mutex); - iwl_down(priv); - mutex_unlock(&priv->mutex); - - iwl_cancel_deferred_work(priv); - - flush_workqueue(priv->workqueue); - - /* User space software may expect getting rfkill changes - * even if interface is down, trans->down will leave the RF - * kill interrupt enabled - */ - iwl_trans_stop_hw(trans(priv)); - - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct cfg80211_gtk_rekey_data *data) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - if (iwlagn_mod_params.sw_crypto) - return; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - - if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif) - goto out; - - memcpy(priv->kek, data->kek, NL80211_KEK_LEN); - memcpy(priv->kck, data->kck, NL80211_KCK_LEN); - priv->replay_ctr = - cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr)); - priv->have_rekey_data = true; - - out: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -#ifdef CONFIG_PM_SLEEP - -static int iwlagn_mac_suspend(struct ieee80211_hw *hw, - struct cfg80211_wowlan *wowlan) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - int ret; - - if (WARN_ON(!wowlan)) - return -EINVAL; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - - /* Don't attempt WoWLAN when not associated, tear down instead. */ - if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION || - !iwl_is_associated_ctx(ctx)) { - ret = 1; - goto out; - } - - ret = iwlagn_suspend(priv, wowlan); - if (ret) - goto error; - - device_set_wakeup_enable(trans(priv)->dev, true); - - iwl_trans_wowlan_suspend(trans(priv)); - - goto out; - - error: - priv->wowlan = false; - iwlagn_prepare_restart(priv); - ieee80211_restart_hw(priv->hw); - out: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static int iwlagn_mac_resume(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct ieee80211_vif *vif; - unsigned long flags; - u32 base, status = 0xffffffff; - int ret = -EIO; - const struct fw_img *img; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - - iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - - base = priv->shrd->device_pointers.error_event_table; - if (iwlagn_hw_valid_rtc_data_addr(base)) { - spin_lock_irqsave(&trans(priv)->reg_lock, flags); - ret = iwl_grab_nic_access_silent(trans(priv)); - if (likely(ret == 0)) { - iwl_write32(trans(priv), HBUS_TARG_MEM_RADDR, base); - status = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(trans(priv)); - } - spin_unlock_irqrestore(&trans(priv)->reg_lock, flags); - -#ifdef CONFIG_IWLWIFI_DEBUGFS - if (ret == 0) { - img = &(priv->fw->img[IWL_UCODE_WOWLAN]); - if (!priv->wowlan_sram) { - priv->wowlan_sram = - kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len, - GFP_KERNEL); - } - - if (priv->wowlan_sram) - _iwl_read_targ_mem_words( - trans(priv), 0x800000, - priv->wowlan_sram, - img->sec[IWL_UCODE_SECTION_DATA].len / 4); - } -#endif - } - - /* we'll clear ctx->vif during iwlagn_prepare_restart() */ - vif = ctx->vif; - - priv->wowlan = false; - - device_set_wakeup_enable(trans(priv)->dev, false); - - iwlagn_prepare_restart(priv); - - memset((void *)&ctx->active, 0, sizeof(ctx->active)); - iwl_connection_init_rx_config(priv, ctx); - iwlagn_set_rxon_chain(priv, ctx); - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - ieee80211_resume_disconnect(vif); - - return 1; -} - -#endif - -static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - - if (iwlagn_tx_skb(priv, skb)) - dev_kfree_skb_any(skb); -} - -static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, - struct ieee80211_sta *sta, - u32 iv32, u16 *phase1key) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key); -} - -static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *ctx = vif_priv->ctx; - int ret; - bool is_default_wep_key = false; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (iwlagn_mod_params.sw_crypto) { - IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n"); - return -EOPNOTSUPP; - } - - switch (key->cipher) { - case WLAN_CIPHER_SUITE_TKIP: - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - /* fall through */ - case WLAN_CIPHER_SUITE_CCMP: - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - break; - default: - break; - } - - /* - * We could program these keys into the hardware as well, but we - * don't expect much multicast traffic in IBSS and having keys - * for more stations is probably more useful. - * - * Mark key TX-only and return 0. - */ - if (vif->type == NL80211_IFTYPE_ADHOC && - !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { - key->hw_key_idx = WEP_INVALID_OFFSET; - return 0; - } - - /* If they key was TX-only, accept deletion */ - if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET) - return 0; - - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 100); - - BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT); - - /* - * If we are getting WEP group key and we didn't receive any key mapping - * so far, we are in legacy wep mode (group key only), otherwise we are - * in 1X mode. - * In legacy wep mode, we use another host command to the uCode. - */ - if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 || - key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) { - if (cmd == SET_KEY) - is_default_wep_key = !ctx->key_mapping_keys; - else - is_default_wep_key = - key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT; - } - - - switch (cmd) { - case SET_KEY: - if (is_default_wep_key) { - ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key); - break; - } - ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta); - if (ret) { - /* - * can't add key for RX, but we don't need it - * in the device for TX so still return 0 - */ - ret = 0; - key->hw_key_idx = WEP_INVALID_OFFSET; - } - - IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n"); - break; - case DISABLE_KEY: - if (is_default_wep_key) - ret = iwl_remove_default_wep_key(priv, ctx, key); - else - ret = iwl_remove_dynamic_key(priv, ctx, key, sta); - - IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n"); - break; - default: - ret = -EINVAL; - } - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum ieee80211_ampdu_mlme_action action, - struct ieee80211_sta *sta, u16 tid, u16 *ssn, - u8 buf_size) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int ret = -EINVAL; - struct iwl_station_priv *sta_priv = (void *) sta->drv_priv; - - IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", - sta->addr, tid); - - if (!(hw_params(priv).sku & EEPROM_SKU_CAP_11N_ENABLE)) - return -EACCES; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - - switch (action) { - case IEEE80211_AMPDU_RX_START: - if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG) - break; - IWL_DEBUG_HT(priv, "start Rx\n"); - ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn); - break; - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT(priv, "stop Rx\n"); - ret = iwl_sta_rx_agg_stop(priv, sta, tid); - break; - case IEEE80211_AMPDU_TX_START: - if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG) - break; - IWL_DEBUG_HT(priv, "start Tx\n"); - ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); - break; - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT(priv, "stop Tx\n"); - ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); - if ((ret == 0) && (priv->agg_tids_count > 0)) { - priv->agg_tids_count--; - IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n", - priv->agg_tids_count); - } - if (!priv->agg_tids_count && - hw_params(priv).use_rts_for_aggregation) { - /* - * switch off RTS/CTS if it was previously enabled - */ - sta_priv->lq_sta.lq.general_params.flags &= - ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK; - iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif), - &sta_priv->lq_sta.lq, CMD_ASYNC, false); - } - break; - case IEEE80211_AMPDU_TX_OPERATIONAL: - ret = iwlagn_tx_agg_oper(priv, vif, sta, tid, buf_size); - break; - } - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - return ret; -} - -static int iwlagn_mac_sta_add(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - bool is_ap = vif->type == NL80211_IFTYPE_STATION; - int ret; - u8 sta_id; - - IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n", - sta->addr); - sta_priv->sta_id = IWL_INVALID_STATION; - - atomic_set(&sta_priv->pending_frames, 0); - if (vif->type == NL80211_IFTYPE_AP) - sta_priv->client = true; - - ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr, - is_ap, sta, &sta_id); - if (ret) { - IWL_ERR(priv, "Unable to add station %pM (%d)\n", - sta->addr, ret); - /* Should we return success if return code is EEXIST ? */ - return ret; - } - - sta_priv->sta_id = sta_id; - - return 0; -} - -static int iwlagn_mac_sta_remove(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - int ret; - - IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n", sta->addr); - - if (vif->type == NL80211_IFTYPE_STATION) { - /* - * Station will be removed from device when the RXON - * is set to unassociated -- just deactivate it here - * to avoid re-programming it. - */ - ret = 0; - iwl_deactivate_station(priv, sta_priv->sta_id, sta->addr); - } else { - ret = iwl_remove_station(priv, sta_priv->sta_id, sta->addr); - if (ret) - IWL_DEBUG_QUIET_RFKILL(priv, - "Error removing station %pM\n", sta->addr); - } - return ret; -} - -static int iwlagn_mac_sta_state(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - enum ieee80211_sta_state old_state, - enum ieee80211_sta_state new_state) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - enum { - NONE, ADD, REMOVE, HT_RATE_INIT, ADD_RATE_INIT, - } op = NONE; - int ret; - - IWL_DEBUG_MAC80211(priv, "station %pM state change %d->%d\n", - sta->addr, old_state, new_state); - - mutex_lock(&priv->mutex); - if (vif->type == NL80211_IFTYPE_STATION) { - if (old_state == IEEE80211_STA_NOTEXIST && - new_state == IEEE80211_STA_NONE) - op = ADD; - else if (old_state == IEEE80211_STA_NONE && - new_state == IEEE80211_STA_NOTEXIST) - op = REMOVE; - else if (old_state == IEEE80211_STA_AUTH && - new_state == IEEE80211_STA_ASSOC) - op = HT_RATE_INIT; - } else { - if (old_state == IEEE80211_STA_AUTH && - new_state == IEEE80211_STA_ASSOC) - op = ADD_RATE_INIT; - else if (old_state == IEEE80211_STA_ASSOC && - new_state == IEEE80211_STA_AUTH) - op = REMOVE; - } - - switch (op) { - case ADD: - ret = iwlagn_mac_sta_add(hw, vif, sta); - if (ret) - break; - /* - * Clear the in-progress flag, the AP station entry was added - * but we'll initialize LQ only when we've associated (which - * would also clear the in-progress flag). This is necessary - * in case we never initialize LQ because association fails. - */ - spin_lock_bh(&priv->sta_lock); - priv->stations[iwl_sta_id(sta)].used &= - ~IWL_STA_UCODE_INPROGRESS; - spin_unlock_bh(&priv->sta_lock); - break; - case REMOVE: - ret = iwlagn_mac_sta_remove(hw, vif, sta); - break; - case ADD_RATE_INIT: - ret = iwlagn_mac_sta_add(hw, vif, sta); - if (ret) - break; - /* Initialize rate scaling */ - IWL_DEBUG_INFO(priv, - "Initializing rate scaling for station %pM\n", - sta->addr); - iwl_rs_rate_init(priv, sta, iwl_sta_id(sta)); - ret = 0; - break; - case HT_RATE_INIT: - /* Initialize rate scaling */ - ret = iwl_sta_update_ht(priv, vif_priv->ctx, sta); - if (ret) - break; - IWL_DEBUG_INFO(priv, - "Initializing rate scaling for station %pM\n", - sta->addr); - iwl_rs_rate_init(priv, sta, iwl_sta_id(sta)); - ret = 0; - break; - default: - ret = 0; - break; - } - - /* - * mac80211 might WARN if we fail, but due the way we - * (badly) handle hard rfkill, we might fail here - */ - if (iwl_is_rfkill(priv)) - ret = 0; - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return ret; -} - -static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, - struct ieee80211_channel_switch *ch_switch) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - const struct iwl_channel_info *ch_info; - struct ieee80211_conf *conf = &hw->conf; - struct ieee80211_channel *channel = ch_switch->channel; - struct iwl_ht_config *ht_conf = &priv->current_ht_config; - /* - * MULTI-FIXME - * When we add support for multiple interfaces, we need to - * revisit this. The channel switch command in the device - * only affects the BSS context, but what does that really - * mean? And what if we get a CSA on the second interface? - * This needs a lot of work. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u16 ch; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - mutex_lock(&priv->mutex); - - if (iwl_is_rfkill(priv)) - goto out; - - if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status) || - test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) - goto out; - - if (!iwl_is_associated_ctx(ctx)) - goto out; - - if (!cfg(priv)->lib->set_channel_switch) - goto out; - - ch = channel->hw_value; - if (le16_to_cpu(ctx->active.channel) == ch) - goto out; - - ch_info = iwl_get_channel_info(priv, channel->band, ch); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "invalid channel\n"); - goto out; - } - - priv->current_ht_config.smps = conf->smps_mode; - - /* Configure HT40 channels */ - ctx->ht.enabled = conf_is_ht(conf); - if (ctx->ht.enabled) - iwlagn_config_ht40(conf, ctx); - else - ctx->ht.is_40mhz = false; - - if ((le16_to_cpu(ctx->staging.channel) != ch)) - ctx->staging.flags = 0; - - iwl_set_rxon_channel(priv, channel, ctx); - iwl_set_rxon_ht(priv, ht_conf); - iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif); - - iwl_set_rate(priv); - /* - * at this point, staging_rxon has the - * configuration for channel switch - */ - set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); - priv->switch_channel = cpu_to_le16(ch); - if (cfg(priv)->lib->set_channel_switch(priv, ch_switch)) { - clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); - priv->switch_channel = 0; - ieee80211_chswitch_done(ctx->vif, false); - } - -out: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static void iwlagn_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - __le32 filter_or = 0, filter_nand = 0; - struct iwl_rxon_context *ctx; - -#define CHK(test, flag) do { \ - if (*total_flags & (test)) \ - filter_or |= (flag); \ - else \ - filter_nand |= (flag); \ - } while (0) - - IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", - changed_flags, *total_flags); - - CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK); - /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */ - CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK); - CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK); - -#undef CHK - - mutex_lock(&priv->mutex); - - for_each_context(priv, ctx) { - ctx->staging.filter_flags &= ~filter_nand; - ctx->staging.filter_flags |= filter_or; - - /* - * Not committing directly because hardware can perform a scan, - * but we'll eventually commit the filter flags change anyway. - */ - } - - mutex_unlock(&priv->mutex); - - /* - * Receiving all multicast frames is always enabled by the - * default flags setup in iwl_connection_init_rx_config() - * since we currently do not support programming multicast - * filters into the device. - */ - *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | - FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; -} - -static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (test_bit(STATUS_EXIT_PENDING, &priv->status)) { - IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n"); - goto done; - } - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n"); - goto done; - } - - /* - * mac80211 will not push any more frames for transmit - * until the flush is completed - */ - if (drop) { - IWL_DEBUG_MAC80211(priv, "send flush command\n"); - if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) { - IWL_ERR(priv, "flush request fail\n"); - goto done; - } - } - IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n"); - iwl_trans_wait_tx_queue_empty(trans(priv)); -done: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw, - struct ieee80211_channel *channel, - enum nl80211_channel_type channel_type, - int duration) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN]; - int err = 0; - - if (!(priv->shrd->valid_contexts & BIT(IWL_RXON_CTX_PAN))) - return -EOPNOTSUPP; - - if (!(ctx->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT))) - return -EOPNOTSUPP; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - err = -EBUSY; - goto out; - } - - priv->hw_roc_channel = channel; - priv->hw_roc_chantype = channel_type; - /* convert from ms to TU */ - priv->hw_roc_duration = DIV_ROUND_UP(1000 * duration, 1024); - priv->hw_roc_start_notified = false; - cancel_delayed_work(&priv->hw_roc_disable_work); - - if (!ctx->is_active) { - static const struct iwl_qos_info default_qos_data = { - .def_qos_parm = { - .ac[0] = { - .cw_min = cpu_to_le16(3), - .cw_max = cpu_to_le16(7), - .aifsn = 2, - .edca_txop = cpu_to_le16(1504), - }, - .ac[1] = { - .cw_min = cpu_to_le16(7), - .cw_max = cpu_to_le16(15), - .aifsn = 2, - .edca_txop = cpu_to_le16(3008), - }, - .ac[2] = { - .cw_min = cpu_to_le16(15), - .cw_max = cpu_to_le16(1023), - .aifsn = 3, - }, - .ac[3] = { - .cw_min = cpu_to_le16(15), - .cw_max = cpu_to_le16(1023), - .aifsn = 7, - }, - }, - }; - - ctx->is_active = true; - ctx->qos_data = default_qos_data; - ctx->staging.dev_type = RXON_DEV_TYPE_P2P; - memcpy(ctx->staging.node_addr, - priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr, - ETH_ALEN); - memcpy(ctx->staging.bssid_addr, - priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr, - ETH_ALEN); - err = iwlagn_commit_rxon(priv, ctx); - if (err) - goto out; - ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK | - RXON_FILTER_PROMISC_MSK | - RXON_FILTER_CTL2HOST_MSK; - - err = iwlagn_commit_rxon(priv, ctx); - if (err) { - iwlagn_disable_roc(priv); - goto out; - } - priv->hw_roc_setup = true; - } - - err = iwl_scan_initiate(priv, ctx->vif, IWL_SCAN_ROC, channel->band); - if (err) - iwlagn_disable_roc(priv); - - out: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return err; -} - -static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - if (!(priv->shrd->valid_contexts & BIT(IWL_RXON_CTX_PAN))) - return -EOPNOTSUPP; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, priv->hw_roc_duration); - iwlagn_disable_roc(priv); - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return 0; -} - -static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw, - enum ieee80211_rssi_event rssi_event) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - IWL_DEBUG_MAC80211(priv, "enter\n"); - mutex_lock(&priv->mutex); - - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - if (rssi_event == RSSI_EVENT_LOW) - priv->bt_enable_pspoll = true; - else if (rssi_event == RSSI_EVENT_HIGH) - priv->bt_enable_pspoll = false; - - iwlagn_send_advance_bt_config(priv); - } else { - IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled," - "ignoring RSSI callback\n"); - } - - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -static int iwlagn_mac_set_tim(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, bool set) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - queue_work(priv->workqueue, &priv->beacon_update); - - return 0; -} - -static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, u16 queue, - const struct ieee80211_tx_queue_params *params) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *ctx = vif_priv->ctx; - int q; - - if (WARN_ON(!ctx)) - return -EINVAL; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (!iwl_is_ready_rf(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); - return -EIO; - } - - if (queue >= AC_NUM) { - IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue); - return 0; - } - - q = AC_NUM - 1 - queue; - - mutex_lock(&priv->mutex); - - ctx->qos_data.def_qos_parm.ac[q].cw_min = - cpu_to_le16(params->cw_min); - ctx->qos_data.def_qos_parm.ac[q].cw_max = - cpu_to_le16(params->cw_max); - ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; - ctx->qos_data.def_qos_parm.ac[q].edca_txop = - cpu_to_le16((params->txop * 32)); - - ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0; - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - return 0; -} - -static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - - return priv->ibss_manager == IWL_IBSS_MANAGER; -} - -static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx) -{ - iwl_connection_init_rx_config(priv, ctx); - - iwlagn_set_rxon_chain(priv, ctx); - - return iwlagn_commit_rxon(priv, ctx); -} - -static int iwl_setup_interface(struct iwl_priv *priv, - struct iwl_rxon_context *ctx) -{ - struct ieee80211_vif *vif = ctx->vif; - int err; - - lockdep_assert_held(&priv->mutex); - - /* - * This variable will be correct only when there's just - * a single context, but all code using it is for hardware - * that supports only one context. - */ - priv->iw_mode = vif->type; - - ctx->is_active = true; - - err = iwl_set_mode(priv, ctx); - if (err) { - if (!ctx->always_active) - ctx->is_active = false; - return err; - } - - if (cfg(priv)->bt_params && cfg(priv)->bt_params->advanced_bt_coexist && - vif->type == NL80211_IFTYPE_ADHOC) { - /* - * pretend to have high BT traffic as long as we - * are operating in IBSS mode, as this will cause - * the rate scaling etc. to behave as intended. - */ - priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH; - } - - return 0; -} - -static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; - struct iwl_rxon_context *tmp, *ctx = NULL; - int err; - enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); - bool reset = false; - - IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", - viftype, vif->addr); - - cancel_delayed_work_sync(&priv->hw_roc_disable_work); - - mutex_lock(&priv->mutex); - - iwlagn_disable_roc(priv); - - if (!iwl_is_ready_rf(priv)) { - IWL_WARN(priv, "Try to add interface when device not ready\n"); - err = -EINVAL; - goto out; - } - - for_each_context(priv, tmp) { - u32 possible_modes = - tmp->interface_modes | tmp->exclusive_interface_modes; - - if (tmp->vif) { - /* On reset we need to add the same interface again */ - if (tmp->vif == vif) { - reset = true; - ctx = tmp; - break; - } - - /* check if this busy context is exclusive */ - if (tmp->exclusive_interface_modes & - BIT(tmp->vif->type)) { - err = -EINVAL; - goto out; - } - continue; - } - - if (!(possible_modes & BIT(viftype))) - continue; - - /* have maybe usable context w/o interface */ - ctx = tmp; - break; - } - - if (!ctx) { - err = -EOPNOTSUPP; - goto out; - } - - vif_priv->ctx = ctx; - ctx->vif = vif; - - err = iwl_setup_interface(priv, ctx); - if (!err || reset) - goto out; - - ctx->vif = NULL; - priv->iw_mode = NL80211_IFTYPE_STATION; - out: - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - return err; -} - -static void iwl_teardown_interface(struct iwl_priv *priv, - struct ieee80211_vif *vif, - bool mode_change) -{ - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - - lockdep_assert_held(&priv->mutex); - - if (priv->scan_vif == vif) { - iwl_scan_cancel_timeout(priv, 200); - iwl_force_scan_end(priv); - } - - if (!mode_change) { - iwl_set_mode(priv, ctx); - if (!ctx->always_active) - ctx->is_active = false; - } - - /* - * When removing the IBSS interface, overwrite the - * BT traffic load with the stored one from the last - * notification, if any. If this is a device that - * doesn't implement this, this has no effect since - * both values are the same and zero. - */ - if (vif->type == NL80211_IFTYPE_ADHOC) - priv->bt_traffic_load = priv->last_bt_traffic_load; -} - -static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - mutex_lock(&priv->mutex); - - if (WARN_ON(ctx->vif != vif)) { - struct iwl_rxon_context *tmp; - IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif); - for_each_context(priv, tmp) - IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n", - tmp->ctxid, tmp, tmp->vif); - } - ctx->vif = NULL; - - iwl_teardown_interface(priv, vif, false); - - mutex_unlock(&priv->mutex); - - IWL_DEBUG_MAC80211(priv, "leave\n"); - -} - -static int iwlagn_mac_change_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum nl80211_iftype newtype, bool newp2p) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl_rxon_context *tmp; - enum nl80211_iftype newviftype = newtype; - u32 interface_modes; - int err; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - newtype = ieee80211_iftype_p2p(newtype, newp2p); - - mutex_lock(&priv->mutex); - - if (!ctx->vif || !iwl_is_ready_rf(priv)) { - /* - * Huh? But wait ... this can maybe happen when - * we're in the middle of a firmware restart! - */ - err = -EBUSY; - goto out; - } - - interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; - - if (!(interface_modes & BIT(newtype))) { - err = -EBUSY; - goto out; - } - - /* - * Refuse a change that should be done by moving from the PAN - * context to the BSS context instead, if the BSS context is - * available and can support the new interface type. - */ - if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif && - (bss_ctx->interface_modes & BIT(newtype) || - bss_ctx->exclusive_interface_modes & BIT(newtype))) { - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - err = -EBUSY; - goto out; - } - - if (ctx->exclusive_interface_modes & BIT(newtype)) { - for_each_context(priv, tmp) { - if (ctx == tmp) - continue; - - if (!tmp->vif) - continue; - - /* - * The current mode switch would be exclusive, but - * another context is active ... refuse the switch. - */ - err = -EBUSY; - goto out; - } - } - - /* success */ - iwl_teardown_interface(priv, vif, true); - vif->type = newviftype; - vif->p2p = newp2p; - err = iwl_setup_interface(priv, ctx); - WARN_ON(err); - /* - * We've switched internally, but submitting to the - * device may have failed for some reason. Mask this - * error, because otherwise mac80211 will not switch - * (and set the interface type back) and we'll be - * out of sync with it. - */ - err = 0; - - out: - mutex_unlock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return err; -} - -static int iwlagn_mac_hw_scan(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct cfg80211_scan_request *req) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int ret; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - if (req->n_channels == 0) - return -EINVAL; - - mutex_lock(&priv->mutex); - - /* - * If an internal scan is in progress, just set - * up the scan_request as per above. - */ - if (priv->scan_type != IWL_SCAN_NORMAL) { - IWL_DEBUG_SCAN(priv, - "SCAN request during internal scan - defer\n"); - priv->scan_request = req; - priv->scan_vif = vif; - ret = 0; - } else { - priv->scan_request = req; - priv->scan_vif = vif; - /* - * mac80211 will only ask for one band at a time - * so using channels[0] here is ok - */ - ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL, - req->channels[0]->band); - if (ret) { - priv->scan_request = NULL; - priv->scan_vif = NULL; - } - } - - IWL_DEBUG_MAC80211(priv, "leave\n"); - - mutex_unlock(&priv->mutex); - - return ret; -} - -static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) -{ - struct iwl_addsta_cmd cmd = { - .mode = STA_CONTROL_MODIFY_MSK, - .station_flags_msk = STA_FLG_PWR_SAVE_MSK, - .sta.sta_id = sta_id, - }; - - iwl_send_add_sta(priv, &cmd, CMD_ASYNC); -} - -static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum sta_notify_cmd cmd, - struct ieee80211_sta *sta) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_station_priv *sta_priv = (void *)sta->drv_priv; - int sta_id; - - IWL_DEBUG_MAC80211(priv, "enter\n"); - - switch (cmd) { - case STA_NOTIFY_SLEEP: - WARN_ON(!sta_priv->client); - sta_priv->asleep = true; - if (atomic_read(&sta_priv->pending_frames) > 0) - ieee80211_sta_block_awake(hw, sta, true); - break; - case STA_NOTIFY_AWAKE: - WARN_ON(!sta_priv->client); - if (!sta_priv->asleep) - break; - sta_priv->asleep = false; - sta_id = iwl_sta_id(sta); - if (sta_id != IWL_INVALID_STATION) - iwl_sta_modify_ps_wake(priv, sta_id); - break; - default: - break; - } - IWL_DEBUG_MAC80211(priv, "leave\n"); -} - -struct ieee80211_ops iwlagn_hw_ops = { - .tx = iwlagn_mac_tx, - .start = iwlagn_mac_start, - .stop = iwlagn_mac_stop, -#ifdef CONFIG_PM_SLEEP - .suspend = iwlagn_mac_suspend, - .resume = iwlagn_mac_resume, -#endif - .add_interface = iwlagn_mac_add_interface, - .remove_interface = iwlagn_mac_remove_interface, - .change_interface = iwlagn_mac_change_interface, - .config = iwlagn_mac_config, - .configure_filter = iwlagn_configure_filter, - .set_key = iwlagn_mac_set_key, - .update_tkip_key = iwlagn_mac_update_tkip_key, - .set_rekey_data = iwlagn_mac_set_rekey_data, - .conf_tx = iwlagn_mac_conf_tx, - .bss_info_changed = iwlagn_bss_info_changed, - .ampdu_action = iwlagn_mac_ampdu_action, - .hw_scan = iwlagn_mac_hw_scan, - .sta_notify = iwlagn_mac_sta_notify, - .sta_state = iwlagn_mac_sta_state, - .channel_switch = iwlagn_mac_channel_switch, - .flush = iwlagn_mac_flush, - .tx_last_beacon = iwlagn_mac_tx_last_beacon, - .remain_on_channel = iwlagn_mac_remain_on_channel, - .cancel_remain_on_channel = iwlagn_mac_cancel_remain_on_channel, - .rssi_callback = iwlagn_mac_rssi_callback, - CFG80211_TESTMODE_CMD(iwlagn_mac_testmode_cmd) - CFG80211_TESTMODE_DUMP(iwlagn_mac_testmode_dump) - .set_tim = iwlagn_mac_set_tim, -}; - -/* This function both allocates and initializes hw and priv. */ -struct ieee80211_hw *iwl_alloc_all(void) -{ - struct iwl_priv *priv; - struct iwl_op_mode *op_mode; - /* mac80211 allocates memory for this device instance, including - * space for this driver's private structure */ - struct ieee80211_hw *hw; - - hw = ieee80211_alloc_hw(sizeof(struct iwl_priv) + - sizeof(struct iwl_op_mode), &iwlagn_hw_ops); - if (!hw) - goto out; - - op_mode = hw->priv; - priv = IWL_OP_MODE_GET_DVM(op_mode); - priv->hw = hw; - -out: - return hw; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-notif-wait.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-notif-wait.c deleted file mode 100644 index 88dc4a0f..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-notif-wait.c +++ /dev/null @@ -1,157 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#include <linux/sched.h> - -#include "iwl-notif-wait.h" - - -void iwl_notification_wait_init(struct iwl_notif_wait_data *notif_wait) -{ - spin_lock_init(¬if_wait->notif_wait_lock); - INIT_LIST_HEAD(¬if_wait->notif_waits); - init_waitqueue_head(¬if_wait->notif_waitq); -} - -void iwl_notification_wait_notify(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt) -{ - if (!list_empty(¬if_wait->notif_waits)) { - struct iwl_notification_wait *w; - - spin_lock(¬if_wait->notif_wait_lock); - list_for_each_entry(w, ¬if_wait->notif_waits, list) { - if (w->cmd != pkt->hdr.cmd) - continue; - w->triggered = true; - if (w->fn) - w->fn(notif_wait, pkt, w->fn_data); - } - spin_unlock(¬if_wait->notif_wait_lock); - - wake_up_all(¬if_wait->notif_waitq); - } -} - -void iwl_abort_notification_waits(struct iwl_notif_wait_data *notif_wait) -{ - unsigned long flags; - struct iwl_notification_wait *wait_entry; - - spin_lock_irqsave(¬if_wait->notif_wait_lock, flags); - list_for_each_entry(wait_entry, ¬if_wait->notif_waits, list) - wait_entry->aborted = true; - spin_unlock_irqrestore(¬if_wait->notif_wait_lock, flags); - - wake_up_all(¬if_wait->notif_waitq); -} - - -void -iwl_init_notification_wait(struct iwl_notif_wait_data *notif_wait, - struct iwl_notification_wait *wait_entry, - u8 cmd, - void (*fn)(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt, void *data), - void *fn_data) -{ - wait_entry->fn = fn; - wait_entry->fn_data = fn_data; - wait_entry->cmd = cmd; - wait_entry->triggered = false; - wait_entry->aborted = false; - - spin_lock_bh(¬if_wait->notif_wait_lock); - list_add(&wait_entry->list, ¬if_wait->notif_waits); - spin_unlock_bh(¬if_wait->notif_wait_lock); -} - -int iwl_wait_notification(struct iwl_notif_wait_data *notif_wait, - struct iwl_notification_wait *wait_entry, - unsigned long timeout) -{ - int ret; - - ret = wait_event_timeout(notif_wait->notif_waitq, - wait_entry->triggered || wait_entry->aborted, - timeout); - - spin_lock_bh(¬if_wait->notif_wait_lock); - list_del(&wait_entry->list); - spin_unlock_bh(¬if_wait->notif_wait_lock); - - if (wait_entry->aborted) - return -EIO; - - /* return value is always >= 0 */ - if (ret <= 0) - return -ETIMEDOUT; - return 0; -} - -void iwl_remove_notification(struct iwl_notif_wait_data *notif_wait, - struct iwl_notification_wait *wait_entry) -{ - spin_lock_bh(¬if_wait->notif_wait_lock); - list_del(&wait_entry->list); - spin_unlock_bh(¬if_wait->notif_wait_lock); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-notif-wait.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-notif-wait.h deleted file mode 100644 index 5e8af957..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-notif-wait.h +++ /dev/null @@ -1,129 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_notif_wait_h__ -#define __iwl_notif_wait_h__ - -#include <linux/wait.h> - -#include "iwl-trans.h" - -struct iwl_notif_wait_data { - struct list_head notif_waits; - spinlock_t notif_wait_lock; - wait_queue_head_t notif_waitq; -}; - -/** - * struct iwl_notification_wait - notification wait entry - * @list: list head for global list - * @fn: function called with the notification - * @cmd: command ID - * - * This structure is not used directly, to wait for a - * notification declare it on the stack, and call - * iwlagn_init_notification_wait() with appropriate - * parameters. Then do whatever will cause the ucode - * to notify the driver, and to wait for that then - * call iwlagn_wait_notification(). - * - * Each notification is one-shot. If at some point we - * need to support multi-shot notifications (which - * can't be allocated on the stack) we need to modify - * the code for them. - */ -struct iwl_notification_wait { - struct list_head list; - - void (*fn)(struct iwl_notif_wait_data *notif_data, - struct iwl_rx_packet *pkt, void *data); - void *fn_data; - - u8 cmd; - bool triggered, aborted; -}; - - -/* caller functions */ -void iwl_notification_wait_init(struct iwl_notif_wait_data *notif_data); -void iwl_notification_wait_notify(struct iwl_notif_wait_data *notif_data, - struct iwl_rx_packet *pkt); -void iwl_abort_notification_waits(struct iwl_notif_wait_data *notif_data); - -/* user functions */ -void __acquires(wait_entry) -iwl_init_notification_wait(struct iwl_notif_wait_data *notif_data, - struct iwl_notification_wait *wait_entry, - u8 cmd, - void (*fn)(struct iwl_notif_wait_data *notif_data, - struct iwl_rx_packet *pkt, void *data), - void *fn_data); - -int __must_check __releases(wait_entry) -iwl_wait_notification(struct iwl_notif_wait_data *notif_data, - struct iwl_notification_wait *wait_entry, - unsigned long timeout); - -void __releases(wait_entry) -iwl_remove_notification(struct iwl_notif_wait_data *notif_data, - struct iwl_notification_wait *wait_entry); - -#endif /* __iwl_notif_wait_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-op-mode.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-op-mode.h deleted file mode 100644 index 6ea4163f..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-op-mode.h +++ /dev/null @@ -1,216 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_op_mode_h__ -#define __iwl_op_mode_h__ - -struct iwl_op_mode; -struct iwl_trans; -struct sk_buff; -struct iwl_device_cmd; -struct iwl_rx_cmd_buffer; -struct iwl_fw; - -/** - * DOC: Operational mode - what is it ? - * - * The operational mode (a.k.a. op_mode) is the layer that implements - * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses - * the transport API to access the HW. The op_mode doesn't need to know how the - * underlying HW works, since the transport layer takes care of that. - * - * There can be several op_mode: i.e. different fw APIs will require two - * different op_modes. This is why the op_mode is virtualized. - */ - -/** - * DOC: Life cycle of the Operational mode - * - * The operational mode has a very simple life cycle. - * - * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the - * capabilities advertized by the fw file (in TLV format). - * 2) The driver layer starts the op_mode (ops->start) - * 3) The op_mode registers registers mac80211 - * 4) The op_mode is governed by mac80211 - * 5) The driver layer stops the op_mode - */ - -/** - * struct iwl_op_mode_ops - op_mode specific operations - * - * The op_mode exports its ops so that external components can start it and - * interact with it. The driver layer typically calls the start and stop - * handlers, the transport layer calls the others. - * - * All the handlers MUST be implemented - * - * @start: start the op_mode. The transport layer is already allocated. - * May sleep - * @stop: stop the op_mode. Must free all the memory allocated. - * May sleep - * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the - * HCMD the this Rx responds to. - * Must be atomic. - * @queue_full: notifies that a HW queue is full. Ac is the ac of the queue - * Must be atomic - * @queue_not_full: notifies that a HW queue is not full any more. - * Ac is the ac of the queue. Must be atomic - * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that - * the radio is killed. Must be atomic. - * @free_skb: allows the transport layer to free skbs that haven't been - * reclaimed by the op_mode. This can happen when the driver is freed and - * there are Tx packets pending in the transport layer. - * Must be atomic - * @nic_error: error notification. Must be atomic - * @cmd_queue_full: Called when the command queue gets full. Must be atomic. - * @nic_config: configure NIC, called before firmware is started. - * May sleep - */ -struct iwl_op_mode_ops { - struct iwl_op_mode *(*start)(struct iwl_trans *trans, - const struct iwl_fw *fw); - void (*stop)(struct iwl_op_mode *op_mode); - int (*rx)(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd); - void (*queue_full)(struct iwl_op_mode *op_mode, u8 ac); - void (*queue_not_full)(struct iwl_op_mode *op_mode, u8 ac); - void (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state); - void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb); - void (*nic_error)(struct iwl_op_mode *op_mode); - void (*cmd_queue_full)(struct iwl_op_mode *op_mode); - void (*nic_config)(struct iwl_op_mode *op_mode); -}; - -/** - * struct iwl_op_mode - operational mode - * - * This holds an implementation of the mac80211 / fw API. - * - * @ops - pointer to its own ops - */ -struct iwl_op_mode { - const struct iwl_op_mode_ops *ops; - const struct iwl_trans *trans; - - char op_mode_specific[0] __aligned(sizeof(void *)); -}; - -static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode) -{ - might_sleep(); - - op_mode->ops->stop(op_mode); -} - -static inline int iwl_op_mode_rx(struct iwl_op_mode *op_mode, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - return op_mode->ops->rx(op_mode, rxb, cmd); -} - -static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode, u8 ac) -{ - op_mode->ops->queue_full(op_mode, ac); -} - -static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, - u8 ac) -{ - op_mode->ops->queue_not_full(op_mode, ac); -} - -static inline void iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, - bool state) -{ - op_mode->ops->hw_rf_kill(op_mode, state); -} - -static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode, - struct sk_buff *skb) -{ - op_mode->ops->free_skb(op_mode, skb); -} - -static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode) -{ - op_mode->ops->nic_error(op_mode); -} - -static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode) -{ - op_mode->ops->cmd_queue_full(op_mode); -} - -static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) -{ - might_sleep(); - op_mode->ops->nic_config(op_mode); -} - -/***************************************************** -* Op mode layers implementations -******************************************************/ -extern const struct iwl_op_mode_ops iwl_dvm_ops; - -#endif /* __iwl_op_mode_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-pci.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-pci.c deleted file mode 100644 index c5e339ee..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-pci.c +++ /dev/null @@ -1,384 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/pci-aspm.h> - -#include "iwl-io.h" -#include "iwl-shared.h" -#include "iwl-trans.h" -#include "iwl-csr.h" -#include "iwl-cfg.h" -#include "iwl-drv.h" -#include "iwl-trans.h" - -#define IWL_PCI_DEVICE(dev, subdev, cfg) \ - .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \ - .subvendor = PCI_ANY_ID, .subdevice = (subdev), \ - .driver_data = (kernel_ulong_t)&(cfg) - -/* Hardware specific file defines the PCI IDs table for that hardware module */ -static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { - {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */ - -/* 5300 Series WiFi */ - {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */ - -/* 5350 Series WiFi/WiMax */ - {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */ - -/* 5150 Series Wifi/WiMax */ - {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */ - - {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */ - {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */ - {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */ - -/* 6x00 Series */ - {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)}, - {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)}, - {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)}, - {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)}, - {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)}, - {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)}, - -/* 6x05 Series */ - {IWL_PCI_DEVICE(0x0082, 0x1301, iwl6005_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1306, iwl6005_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1307, iwl6005_2bg_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1321, iwl6005_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1326, iwl6005_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0085, 0x1311, iwl6005_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0085, 0x1316, iwl6005_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0xC020, iwl6005_2agn_sff_cfg)}, - {IWL_PCI_DEVICE(0x0085, 0xC220, iwl6005_2agn_sff_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x4820, iwl6005_2agn_d_cfg)}, - {IWL_PCI_DEVICE(0x0082, 0x1304, iwl6005_2agn_mow1_cfg)},/* low 5GHz active */ - {IWL_PCI_DEVICE(0x0082, 0x1305, iwl6005_2agn_mow2_cfg)},/* high 5GHz active */ - -/* 6x30 Series */ - {IWL_PCI_DEVICE(0x008A, 0x5305, iwl1030_bgn_cfg)}, - {IWL_PCI_DEVICE(0x008A, 0x5307, iwl1030_bg_cfg)}, - {IWL_PCI_DEVICE(0x008A, 0x5325, iwl1030_bgn_cfg)}, - {IWL_PCI_DEVICE(0x008A, 0x5327, iwl1030_bg_cfg)}, - {IWL_PCI_DEVICE(0x008B, 0x5315, iwl1030_bgn_cfg)}, - {IWL_PCI_DEVICE(0x008B, 0x5317, iwl1030_bg_cfg)}, - {IWL_PCI_DEVICE(0x0090, 0x5211, iwl6030_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0090, 0x5215, iwl6030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0090, 0x5216, iwl6030_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5201, iwl6030_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5205, iwl6030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5206, iwl6030_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5207, iwl6030_2bg_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5221, iwl6030_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5225, iwl6030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0091, 0x5226, iwl6030_2abg_cfg)}, - -/* 6x50 WiFi/WiMax Series */ - {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)}, - {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)}, - {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)}, - -/* 6150 WiFi/WiMax Series */ - {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)}, - -/* 1000 Series WiFi */ - {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)}, - {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)}, - -/* 100 Series WiFi */ - {IWL_PCI_DEVICE(0x08AE, 0x1005, iwl100_bgn_cfg)}, - {IWL_PCI_DEVICE(0x08AE, 0x1007, iwl100_bg_cfg)}, - {IWL_PCI_DEVICE(0x08AF, 0x1015, iwl100_bgn_cfg)}, - {IWL_PCI_DEVICE(0x08AF, 0x1017, iwl100_bg_cfg)}, - {IWL_PCI_DEVICE(0x08AE, 0x1025, iwl100_bgn_cfg)}, - {IWL_PCI_DEVICE(0x08AE, 0x1027, iwl100_bg_cfg)}, - -/* 130 Series WiFi */ - {IWL_PCI_DEVICE(0x0896, 0x5005, iwl130_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0896, 0x5007, iwl130_bg_cfg)}, - {IWL_PCI_DEVICE(0x0897, 0x5015, iwl130_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0897, 0x5017, iwl130_bg_cfg)}, - {IWL_PCI_DEVICE(0x0896, 0x5025, iwl130_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0896, 0x5027, iwl130_bg_cfg)}, - -/* 2x00 Series */ - {IWL_PCI_DEVICE(0x0890, 0x4022, iwl2000_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0891, 0x4222, iwl2000_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0890, 0x4422, iwl2000_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0890, 0x4822, iwl2000_2bgn_d_cfg)}, - -/* 2x30 Series */ - {IWL_PCI_DEVICE(0x0887, 0x4062, iwl2030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0888, 0x4262, iwl2030_2bgn_cfg)}, - {IWL_PCI_DEVICE(0x0887, 0x4462, iwl2030_2bgn_cfg)}, - -/* 6x35 Series */ - {IWL_PCI_DEVICE(0x088E, 0x4060, iwl6035_2agn_cfg)}, - {IWL_PCI_DEVICE(0x088F, 0x4260, iwl6035_2agn_cfg)}, - {IWL_PCI_DEVICE(0x088E, 0x4460, iwl6035_2agn_cfg)}, - {IWL_PCI_DEVICE(0x088E, 0x4860, iwl6035_2agn_cfg)}, - -/* 105 Series */ - {IWL_PCI_DEVICE(0x0894, 0x0022, iwl105_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0895, 0x0222, iwl105_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0894, 0x0422, iwl105_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0894, 0x0822, iwl105_bgn_d_cfg)}, - -/* 135 Series */ - {IWL_PCI_DEVICE(0x0892, 0x0062, iwl135_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0893, 0x0262, iwl135_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0892, 0x0462, iwl135_bgn_cfg)}, - - {0} -}; -MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); - -/* PCI registers */ -#define PCI_CFG_RETRY_TIMEOUT 0x041 - -static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - const struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data); - struct iwl_shared *shrd; - struct iwl_trans *iwl_trans; - int err; - - shrd = kzalloc(sizeof(*iwl_trans->shrd), GFP_KERNEL); - if (!shrd) { - dev_printk(KERN_ERR, &pdev->dev, - "Couldn't allocate iwl_shared"); - err = -ENOMEM; - goto out_free_bus; - } - -#ifdef CONFIG_IWLWIFI_IDI - iwl_trans = iwl_trans_idi_alloc(shrd, pdev, ent); -#else - iwl_trans = iwl_trans_pcie_alloc(shrd, pdev, ent); -#endif - if (iwl_trans == NULL) { - err = -ENOMEM; - goto out_free_bus; - } - - shrd->trans = iwl_trans; - pci_set_drvdata(pdev, iwl_trans); - - err = iwl_drv_start(shrd, iwl_trans, cfg); - if (err) - goto out_free_trans; - - return 0; - -out_free_trans: - iwl_trans_free(iwl_trans); - pci_set_drvdata(pdev, NULL); -out_free_bus: - kfree(shrd); - return err; -} - -static void __devexit iwl_pci_remove(struct pci_dev *pdev) -{ - struct iwl_trans *iwl_trans = pci_get_drvdata(pdev); - struct iwl_shared *shrd = iwl_trans->shrd; - - iwl_drv_stop(shrd); - iwl_trans_free(shrd->trans); - - pci_set_drvdata(pdev, NULL); - - kfree(shrd); -} - -#ifdef CONFIG_PM_SLEEP - -static int iwl_pci_suspend(struct device *device) -{ - struct pci_dev *pdev = to_pci_dev(device); - struct iwl_trans *iwl_trans = pci_get_drvdata(pdev); - - /* Before you put code here, think about WoWLAN. You cannot check here - * whether WoWLAN is enabled or not, and your code will run even if - * WoWLAN is enabled - don't kill the NIC, someone may need it in Sx. - */ - - return iwl_trans_suspend(iwl_trans); -} - -static int iwl_pci_resume(struct device *device) -{ - struct pci_dev *pdev = to_pci_dev(device); - struct iwl_trans *iwl_trans = pci_get_drvdata(pdev); - - /* Before you put code here, think about WoWLAN. You cannot check here - * whether WoWLAN is enabled or not, and your code will run even if - * WoWLAN is enabled - the NIC may be alive. - */ - - /* - * We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - - return iwl_trans_resume(iwl_trans); -} - -static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume); - -#define IWL_PM_OPS (&iwl_dev_pm_ops) - -#else - -#define IWL_PM_OPS NULL - -#endif - -static struct pci_driver iwl_pci_driver = { - .name = DRV_NAME, - .id_table = iwl_hw_card_ids, - .probe = iwl_pci_probe, - .remove = __devexit_p(iwl_pci_remove), - .driver.pm = IWL_PM_OPS, -}; - -int __must_check iwl_pci_register_driver(void) -{ - int ret; - ret = pci_register_driver(&iwl_pci_driver); - if (ret) - pr_err("Unable to initialize PCI module\n"); - - return ret; -} - -void iwl_pci_unregister_driver(void) -{ - pci_unregister_driver(&iwl_pci_driver); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-power.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-power.c deleted file mode 100644 index 958d9d09..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-power.c +++ /dev/null @@ -1,445 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-agn.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-commands.h" -#include "iwl-debug.h" -#include "iwl-power.h" -#include "iwl-trans.h" -#include "iwl-shared.h" - -/* - * Setting power level allows the card to go to sleep when not busy. - * - * We calculate a sleep command based on the required latency, which - * we get from mac80211. In order to handle thermal throttling, we can - * also use pre-defined power levels. - */ - -/* - * This defines the old power levels. They are still used by default - * (level 1) and for thermal throttle (levels 3 through 5) - */ - -struct iwl_power_vec_entry { - struct iwl_powertable_cmd cmd; - u8 no_dtim; /* number of skip dtim */ -}; - -#define IWL_DTIM_RANGE_0_MAX 2 -#define IWL_DTIM_RANGE_1_MAX 10 - -#define NOSLP cpu_to_le16(0), 0, 0 -#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0 -#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK | \ - IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \ - IWL_POWER_ADVANCE_PM_ENA_MSK) -#define ASLP_TOUT(T) cpu_to_le32(T) -#define TU_TO_USEC 1024 -#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC) -#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \ - cpu_to_le32(X1), \ - cpu_to_le32(X2), \ - cpu_to_le32(X3), \ - cpu_to_le32(X4)} -/* default power management (not Tx power) table values */ -/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */ -/* DTIM 0 - 2 */ -static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = { - {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0}, - {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, - {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0}, - {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1}, - {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2} -}; - - -/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ -/* DTIM 3 - 10 */ -static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = { - {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, - {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, - {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0}, - {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1}, - {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2} -}; - -/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ -/* DTIM 11 - */ -static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = { - {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, - {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, - {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, - {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0}, - {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} -}; - -/* advance power management */ -/* DTIM 0 - 2 */ -static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = { - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} -}; - - -/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */ -/* DTIM 3 - 10 */ -static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = { - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2} -}; - -/* for DTIM period > IWL_DTIM_RANGE_1_MAX */ -/* DTIM 11 - */ -static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = { - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0}, - {{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50), - SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2} -}; - -static void iwl_static_sleep_cmd(struct iwl_priv *priv, - struct iwl_powertable_cmd *cmd, - enum iwl_power_level lvl, int period) -{ - const struct iwl_power_vec_entry *table; - int max_sleep[IWL_POWER_VEC_SIZE] = { 0 }; - int i; - u8 skip; - u32 slp_itrvl; - - if (cfg(priv)->adv_pm) { - table = apm_range_2; - if (period <= IWL_DTIM_RANGE_1_MAX) - table = apm_range_1; - if (period <= IWL_DTIM_RANGE_0_MAX) - table = apm_range_0; - } else { - table = range_2; - if (period <= IWL_DTIM_RANGE_1_MAX) - table = range_1; - if (period <= IWL_DTIM_RANGE_0_MAX) - table = range_0; - } - - if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM)) - memset(cmd, 0, sizeof(*cmd)); - else - *cmd = table[lvl].cmd; - - if (period == 0) { - skip = 0; - period = 1; - for (i = 0; i < IWL_POWER_VEC_SIZE; i++) - max_sleep[i] = 1; - - } else { - skip = table[lvl].no_dtim; - for (i = 0; i < IWL_POWER_VEC_SIZE; i++) - max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]); - max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1; - } - - slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); - /* figure out the listen interval based on dtim period and skip */ - if (slp_itrvl == 0xFF) - cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = - cpu_to_le32(period * (skip + 1)); - - slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); - if (slp_itrvl > period) - cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = - cpu_to_le32((slp_itrvl / period) * period); - - if (skip) - cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK; - else - cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK; - - if (cfg(priv)->base_params->shadow_reg_enable) - cmd->flags |= IWL_POWER_SHADOW_REG_ENA; - else - cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA; - - if (iwl_advanced_bt_coexist(priv)) { - if (!cfg(priv)->bt_params->bt_sco_disable) - cmd->flags |= IWL_POWER_BT_SCO_ENA; - else - cmd->flags &= ~IWL_POWER_BT_SCO_ENA; - } - - - slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]); - if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL) - cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] = - cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL); - - /* enforce max sleep interval */ - for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) { - if (le32_to_cpu(cmd->sleep_interval[i]) > - (max_sleep[i] * period)) - cmd->sleep_interval[i] = - cpu_to_le32(max_sleep[i] * period); - if (i != (IWL_POWER_VEC_SIZE - 1)) { - if (le32_to_cpu(cmd->sleep_interval[i]) > - le32_to_cpu(cmd->sleep_interval[i+1])) - cmd->sleep_interval[i] = - cmd->sleep_interval[i+1]; - } - } - - if (priv->power_data.bus_pm) - cmd->flags |= IWL_POWER_PCI_PM_MSK; - else - cmd->flags &= ~IWL_POWER_PCI_PM_MSK; - - IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n", - skip, period); - IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1); -} - -static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv, - struct iwl_powertable_cmd *cmd) -{ - memset(cmd, 0, sizeof(*cmd)); - - if (priv->power_data.bus_pm) - cmd->flags |= IWL_POWER_PCI_PM_MSK; - - IWL_DEBUG_POWER(priv, "Sleep command for CAM\n"); -} - -static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv, - struct iwl_powertable_cmd *cmd, - int dynps_ms, int wakeup_period) -{ - /* - * These are the original power level 3 sleep successions. The - * device may behave better with such succession and was also - * only tested with that. Just like the original sleep commands, - * also adjust the succession here to the wakeup_period below. - * The ranges are the same as for the sleep commands, 0-2, 3-9 - * and >10, which is selected based on the DTIM interval for - * the sleep index but here we use the wakeup period since that - * is what we need to do for the latency requirements. - */ - static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 }; - static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 }; - static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF }; - const u8 *slp_succ = slp_succ_r0; - int i; - - if (wakeup_period > IWL_DTIM_RANGE_0_MAX) - slp_succ = slp_succ_r1; - if (wakeup_period > IWL_DTIM_RANGE_1_MAX) - slp_succ = slp_succ_r2; - - memset(cmd, 0, sizeof(*cmd)); - - cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK | - IWL_POWER_FAST_PD; /* no use seeing frames for others */ - - if (priv->power_data.bus_pm) - cmd->flags |= IWL_POWER_PCI_PM_MSK; - - if (cfg(priv)->base_params->shadow_reg_enable) - cmd->flags |= IWL_POWER_SHADOW_REG_ENA; - else - cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA; - - if (iwl_advanced_bt_coexist(priv)) { - if (!cfg(priv)->bt_params->bt_sco_disable) - cmd->flags |= IWL_POWER_BT_SCO_ENA; - else - cmd->flags &= ~IWL_POWER_BT_SCO_ENA; - } - - cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms); - cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms); - - for (i = 0; i < IWL_POWER_VEC_SIZE; i++) - cmd->sleep_interval[i] = - cpu_to_le32(min_t(int, slp_succ[i], wakeup_period)); - - IWL_DEBUG_POWER(priv, "Automatic sleep command\n"); -} - -static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd) -{ - IWL_DEBUG_POWER(priv, "Sending power/sleep command\n"); - IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags); - IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout)); - IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout)); - IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n", - le32_to_cpu(cmd->sleep_interval[0]), - le32_to_cpu(cmd->sleep_interval[1]), - le32_to_cpu(cmd->sleep_interval[2]), - le32_to_cpu(cmd->sleep_interval[3]), - le32_to_cpu(cmd->sleep_interval[4])); - - return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, CMD_SYNC, - sizeof(struct iwl_powertable_cmd), cmd); -} - -static void iwl_power_build_cmd(struct iwl_priv *priv, - struct iwl_powertable_cmd *cmd) -{ - bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS; - int dtimper; - - dtimper = priv->hw->conf.ps_dtim_period ?: 1; - - if (priv->wowlan) - iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper); - else if (!cfg(priv)->base_params->no_idle_support && - priv->hw->conf.flags & IEEE80211_CONF_IDLE) - iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20); - else if (iwl_tt_is_low_power_state(priv)) { - /* in thermal throttling low power state */ - iwl_static_sleep_cmd(priv, cmd, - iwl_tt_current_power_mode(priv), dtimper); - } else if (!enabled) - iwl_power_sleep_cam_cmd(priv, cmd); - else if (priv->power_data.debug_sleep_level_override >= 0) - iwl_static_sleep_cmd(priv, cmd, - priv->power_data.debug_sleep_level_override, - dtimper); - else if (iwlagn_mod_params.no_sleep_autoadjust) { - if (iwlagn_mod_params.power_level > IWL_POWER_INDEX_1 && - iwlagn_mod_params.power_level <= IWL_POWER_INDEX_5) - iwl_static_sleep_cmd(priv, cmd, - iwlagn_mod_params.power_level, dtimper); - else - iwl_static_sleep_cmd(priv, cmd, - IWL_POWER_INDEX_1, dtimper); - } else - iwl_power_fill_sleep_cmd(priv, cmd, - priv->hw->conf.dynamic_ps_timeout, - priv->hw->conf.max_sleep_period); -} - -int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, - bool force) -{ - int ret; - bool update_chains; - - lockdep_assert_held(&priv->mutex); - - /* Don't update the RX chain when chain noise calibration is running */ - update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE || - priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE; - - if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force) - return 0; - - if (!iwl_is_ready_rf(priv)) - return -EIO; - - /* scan complete use sleep_power_next, need to be updated */ - memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd)); - if (test_bit(STATUS_SCANNING, &priv->status) && !force) { - IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n"); - return 0; - } - - if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK) - set_bit(STATUS_POWER_PMI, &priv->shrd->status); - - ret = iwl_set_power(priv, cmd); - if (!ret) { - if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)) - clear_bit(STATUS_POWER_PMI, &priv->shrd->status); - - if (update_chains) - iwl_update_chain_flags(priv); - else - IWL_DEBUG_POWER(priv, - "Cannot update the power, chain noise " - "calibration running: %d\n", - priv->chain_noise_data.state); - - memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)); - } else - IWL_ERR(priv, "set power fail, ret = %d", ret); - - return ret; -} - -int iwl_power_update_mode(struct iwl_priv *priv, bool force) -{ - struct iwl_powertable_cmd cmd; - - iwl_power_build_cmd(priv, &cmd); - return iwl_power_set_mode(priv, &cmd, force); -} - -/* initialize to default */ -void iwl_power_initialize(struct iwl_priv *priv) -{ - priv->power_data.bus_pm = trans(priv)->pm_support; - - priv->power_data.debug_sleep_level_override = -1; - - memset(&priv->power_data.sleep_cmd, 0, - sizeof(priv->power_data.sleep_cmd)); -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-power.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-power.h deleted file mode 100644 index 07a19fce..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-power.h +++ /dev/null @@ -1,56 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ -#ifndef __iwl_power_setting_h__ -#define __iwl_power_setting_h__ - -#include "iwl-commands.h" - -enum iwl_power_level { - IWL_POWER_INDEX_1, - IWL_POWER_INDEX_2, - IWL_POWER_INDEX_3, - IWL_POWER_INDEX_4, - IWL_POWER_INDEX_5, - IWL_POWER_NUM -}; - -struct iwl_power_mgr { - struct iwl_powertable_cmd sleep_cmd; - struct iwl_powertable_cmd sleep_cmd_next; - int debug_sleep_level_override; - bool bus_pm; -}; - -int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd, - bool force); -int iwl_power_update_mode(struct iwl_priv *priv, bool force); -void iwl_power_initialize(struct iwl_priv *priv); - -extern bool no_sleep_autoadjust; - -#endif /* __iwl_power_setting_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-prph.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-prph.h deleted file mode 100644 index dfd54662..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-prph.h +++ /dev/null @@ -1,257 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - *****************************************************************************/ - -#ifndef __iwl_prph_h__ -#define __iwl_prph_h__ - -/* - * Registers in this file are internal, not PCI bus memory mapped. - * Driver accesses these via HBUS_TARG_PRPH_* registers. - */ -#define PRPH_BASE (0x00000) -#define PRPH_END (0xFFFFF) - -/* APMG (power management) constants */ -#define APMG_BASE (PRPH_BASE + 0x3000) -#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000) -#define APMG_CLK_EN_REG (APMG_BASE + 0x0004) -#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008) -#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c) -#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010) -#define APMG_RFKILL_REG (APMG_BASE + 0x0014) -#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c) -#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020) -#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058) -#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C) - -#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001) -#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) -#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) - -#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) -#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) -#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) -#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */ -#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060) - -#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) - -/** - * Tx Scheduler - * - * The Tx Scheduler selects the next frame to be transmitted, choosing TFDs - * (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in - * host DRAM. It steers each frame's Tx command (which contains the frame - * data) into one of up to 7 prioritized Tx DMA FIFO channels within the - * device. A queue maps to only one (selectable by driver) Tx DMA channel, - * but one DMA channel may take input from several queues. - * - * Tx DMA FIFOs have dedicated purposes. - * - * For 5000 series and up, they are used differently - * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c): - * - * 0 -- EDCA BK (background) frames, lowest priority - * 1 -- EDCA BE (best effort) frames, normal priority - * 2 -- EDCA VI (video) frames, higher priority - * 3 -- EDCA VO (voice) and management frames, highest priority - * 4 -- unused - * 5 -- unused - * 6 -- unused - * 7 -- Commands - * - * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6. - * In addition, driver can map the remaining queues to Tx DMA/FIFO - * channels 0-3 to support 11n aggregation via EDCA DMA channels. - * - * The driver sets up each queue to work in one of two modes: - * - * 1) Scheduler-Ack, in which the scheduler automatically supports a - * block-ack (BA) window of up to 64 TFDs. In this mode, each queue - * contains TFDs for a unique combination of Recipient Address (RA) - * and Traffic Identifier (TID), that is, traffic of a given - * Quality-Of-Service (QOS) priority, destined for a single station. - * - * In scheduler-ack mode, the scheduler keeps track of the Tx status of - * each frame within the BA window, including whether it's been transmitted, - * and whether it's been acknowledged by the receiving station. The device - * automatically processes block-acks received from the receiving STA, - * and reschedules un-acked frames to be retransmitted (successful - * Tx completion may end up being out-of-order). - * - * The driver must maintain the queue's Byte Count table in host DRAM - * for this mode. - * This mode does not support fragmentation. - * - * 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order. - * The device may automatically retry Tx, but will retry only one frame - * at a time, until receiving ACK from receiving station, or reaching - * retry limit and giving up. - * - * The command queue (#4/#9) must use this mode! - * This mode does not require use of the Byte Count table in host DRAM. - * - * Driver controls scheduler operation via 3 means: - * 1) Scheduler registers - * 2) Shared scheduler data base in internal SRAM - * 3) Shared data in host DRAM - * - * Initialization: - * - * When loading, driver should allocate memory for: - * 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs. - * 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory - * (1024 bytes for each queue). - * - * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4/#9, the command queue, otherwise - * the driver can't issue commands!): - */ -#define SCD_MEM_LOWER_BOUND (0x0000) - -/** - * Max Tx window size is the max number of contiguous TFDs that the scheduler - * can keep track of at one time when creating block-ack chains of frames. - * Note that "64" matches the number of ack bits in a block-ack packet. - */ -#define SCD_WIN_SIZE 64 -#define SCD_FRAME_LIMIT 64 - -#define SCD_TXFIFO_POS_TID (0) -#define SCD_TXFIFO_POS_RA (4) -#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF) - -/* agn SCD */ -#define SCD_QUEUE_STTS_REG_POS_TXF (0) -#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3) -#define SCD_QUEUE_STTS_REG_POS_WSL (4) -#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19) -#define SCD_QUEUE_STTS_REG_MSK (0x00FF0000) - -#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8) -#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00) -#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24) -#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000) -#define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0) -#define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16) -#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000) - -/* Context Data */ -#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600) -#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0) - -/* Tx status */ -#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0) -#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0) - -/* Translation Data */ -#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0) -#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808) - -#define SCD_CONTEXT_QUEUE_OFFSET(x)\ - (SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8)) - -#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \ - ((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc) - -#define SCD_BASE (PRPH_BASE + 0xa02c00) - -#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0) -#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8) -#define SCD_AIT (SCD_BASE + 0x0c) -#define SCD_TXFACT (SCD_BASE + 0x10) -#define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) -#define SCD_CHAINEXT_EN (SCD_BASE + 0x244) -#define SCD_AGGR_SEL (SCD_BASE + 0x248) -#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) - -static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl) -{ - if (chnl < 20) - return SCD_BASE + 0x18 + chnl * 4; - WARN_ON_ONCE(chnl >= 32); - return SCD_BASE + 0x284 + (chnl - 20) * 4; -} - -static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl) -{ - if (chnl < 20) - return SCD_BASE + 0x68 + chnl * 4; - WARN_ON_ONCE(chnl >= 32); - return SCD_BASE + 0x2B4 + (chnl - 20) * 4; -} - -static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) -{ - if (chnl < 20) - return SCD_BASE + 0x10c + chnl * 4; - WARN_ON_ONCE(chnl >= 32); - return SCD_BASE + 0x384 + (chnl - 20) * 4; -} - -/*********************** END TX SCHEDULER *************************************/ - -#endif /* __iwl_prph_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-scan.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-scan.c deleted file mode 100644 index 902efe4b..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-scan.c +++ /dev/null @@ -1,1096 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - *****************************************************************************/ -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/etherdevice.h> -#include <net/mac80211.h> - -#include "iwl-eeprom.h" -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-trans.h" - -/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after - * sending probe req. This should be set long enough to hear probe responses - * from more than one AP. */ -#define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */ -#define IWL_ACTIVE_DWELL_TIME_52 (20) - -#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3) -#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2) - -/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel. - * Must be set longer than active dwell time. - * For the most reliable scan, set > AP beacon interval (typically 100msec). */ -#define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */ -#define IWL_PASSIVE_DWELL_TIME_52 (10) -#define IWL_PASSIVE_DWELL_BASE (100) -#define IWL_CHANNEL_TUNE_TIME 5 - -static int iwl_send_scan_abort(struct iwl_priv *priv) -{ - int ret; - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_ABORT_CMD, - .flags = CMD_SYNC | CMD_WANT_SKB, - }; - __le32 *status; - - /* Exit instantly with error when device is not ready - * to receive scan abort command or it does not perform - * hardware scan currently */ - if (!test_bit(STATUS_READY, &priv->status) || - !test_bit(STATUS_GEO_CONFIGURED, &priv->status) || - !test_bit(STATUS_SCAN_HW, &priv->status) || - test_bit(STATUS_FW_ERROR, &priv->shrd->status)) - return -EIO; - - ret = iwl_dvm_send_cmd(priv, &cmd); - if (ret) - return ret; - - status = (void *)cmd.resp_pkt->data; - if (*status != CAN_ABORT_STATUS) { - /* The scan abort will return 1 for success or - * 2 for "failure". A failure condition can be - * due to simply not being in an active scan which - * can occur if we send the scan abort before we - * the microcode has notified us that a scan is - * completed. */ - IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", - le32_to_cpu(*status)); - ret = -EIO; - } - - iwl_free_resp(&cmd); - return ret; -} - -static void iwl_complete_scan(struct iwl_priv *priv, bool aborted) -{ - /* check if scan was requested from mac80211 */ - if (priv->scan_request) { - IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n"); - ieee80211_scan_completed(priv->hw, aborted); - } - - if (priv->scan_type == IWL_SCAN_ROC) { - ieee80211_remain_on_channel_expired(priv->hw); - priv->hw_roc_channel = NULL; - schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ); - } - - priv->scan_type = IWL_SCAN_NORMAL; - priv->scan_vif = NULL; - priv->scan_request = NULL; -} - -static void iwl_process_scan_complete(struct iwl_priv *priv) -{ - bool aborted; - - lockdep_assert_held(&priv->mutex); - - if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->status)) - return; - - IWL_DEBUG_SCAN(priv, "Completed scan.\n"); - - cancel_delayed_work(&priv->scan_check); - - aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status); - if (aborted) - IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n"); - - if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already completed.\n"); - goto out_settings; - } - - if (priv->scan_type == IWL_SCAN_ROC) { - ieee80211_remain_on_channel_expired(priv->hw); - priv->hw_roc_channel = NULL; - schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ); - } - - if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) { - int err; - - /* Check if mac80211 requested scan during our internal scan */ - if (priv->scan_request == NULL) - goto out_complete; - - /* If so request a new scan */ - err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL, - priv->scan_request->channels[0]->band); - if (err) { - IWL_DEBUG_SCAN(priv, - "failed to initiate pending scan: %d\n", err); - aborted = true; - goto out_complete; - } - - return; - } - -out_complete: - iwl_complete_scan(priv, aborted); - -out_settings: - /* Can we still talk to firmware ? */ - if (!iwl_is_ready_rf(priv)) - return; - - iwlagn_post_scan(priv); -} - -void iwl_force_scan_end(struct iwl_priv *priv) -{ - lockdep_assert_held(&priv->mutex); - - if (!test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n"); - return; - } - - IWL_DEBUG_SCAN(priv, "Forcing scan end\n"); - clear_bit(STATUS_SCANNING, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - clear_bit(STATUS_SCAN_ABORTING, &priv->status); - clear_bit(STATUS_SCAN_COMPLETE, &priv->status); - iwl_complete_scan(priv, true); -} - -static void iwl_do_scan_abort(struct iwl_priv *priv) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - if (!test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n"); - return; - } - - if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan abort in progress\n"); - return; - } - - ret = iwl_send_scan_abort(priv); - if (ret) { - IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret); - iwl_force_scan_end(priv); - } else - IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n"); -} - -/** - * iwl_scan_cancel - Cancel any currently executing HW scan - */ -int iwl_scan_cancel(struct iwl_priv *priv) -{ - IWL_DEBUG_SCAN(priv, "Queuing abort scan\n"); - queue_work(priv->workqueue, &priv->abort_scan); - return 0; -} - -/** - * iwl_scan_cancel_timeout - Cancel any currently executing HW scan - * @ms: amount of time to wait (in milliseconds) for scan to abort - * - */ -void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(ms); - - lockdep_assert_held(&priv->mutex); - - IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n"); - - iwl_do_scan_abort(priv); - - while (time_before_eq(jiffies, timeout)) { - if (!test_bit(STATUS_SCAN_HW, &priv->status)) - goto finished; - msleep(20); - } - - return; - - finished: - /* - * Now STATUS_SCAN_HW is clear. This means that the - * device finished, but the background work is going - * to execute at best as soon as we release the mutex. - * Since we need to be able to issue a new scan right - * after this function returns, run the complete here. - * The STATUS_SCAN_COMPLETE bit will then be cleared - * and prevent the background work from "completing" - * a possible new scan. - */ - iwl_process_scan_complete(priv); -} - -/* Service response to REPLY_SCAN_CMD (0x80) */ -static int iwl_rx_reply_scan(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanreq_notification *notif = (void *)pkt->data; - - IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status); -#endif - return 0; -} - -/* Service SCAN_START_NOTIFICATION (0x82) */ -static int iwl_rx_scan_start_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanstart_notification *notif = (void *)pkt->data; - - priv->scan_start_tsf = le32_to_cpu(notif->tsf_low); - IWL_DEBUG_SCAN(priv, "Scan start: " - "%d [802.11%s] " - "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", - notif->channel, - notif->band ? "bg" : "a", - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - notif->status, notif->beacon_timer); - - if (priv->scan_type == IWL_SCAN_ROC && - !priv->hw_roc_start_notified) { - ieee80211_ready_on_channel(priv->hw); - priv->hw_roc_start_notified = true; - } - - return 0; -} - -/* Service SCAN_RESULTS_NOTIFICATION (0x83) */ -static int iwl_rx_scan_results_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ -#ifdef CONFIG_IWLWIFI_DEBUG - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scanresults_notification *notif = (void *)pkt->data; - - IWL_DEBUG_SCAN(priv, "Scan ch.res: " - "%d [802.11%s] " - "probe status: %u:%u " - "(TSF: 0x%08X:%08X) - %d " - "elapsed=%lu usec\n", - notif->channel, - notif->band ? "bg" : "a", - notif->probe_status, notif->num_probe_not_sent, - le32_to_cpu(notif->tsf_high), - le32_to_cpu(notif->tsf_low), - le32_to_cpu(notif->statistics[0]), - le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf); -#endif - return 0; -} - -/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */ -static int iwl_rx_scan_complete_notif(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scancomplete_notification *scan_notif = (void *)pkt->data; - - IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n", - scan_notif->scanned_channels, - scan_notif->tsf_low, - scan_notif->tsf_high, scan_notif->status); - - IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n", - (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2", - jiffies_to_msecs(jiffies - priv->scan_start)); - - /* - * When aborting, we run the scan completed background work inline - * and the background work must then do nothing. The SCAN_COMPLETE - * bit helps implement that logic and thus needs to be set before - * queueing the work. Also, since the scan abort waits for SCAN_HW - * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW - * to avoid a race there. - */ - set_bit(STATUS_SCAN_COMPLETE, &priv->status); - clear_bit(STATUS_SCAN_HW, &priv->status); - queue_work(priv->workqueue, &priv->scan_completed); - - if (priv->iw_mode != NL80211_IFTYPE_ADHOC && - iwl_advanced_bt_coexist(priv) && - priv->bt_status != scan_notif->bt_status) { - if (scan_notif->bt_status) { - /* BT on */ - if (!priv->bt_ch_announce) - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_HIGH; - /* - * otherwise, no traffic load information provided - * no changes made - */ - } else { - /* BT off */ - priv->bt_traffic_load = - IWL_BT_COEX_TRAFFIC_LOAD_NONE; - } - priv->bt_status = scan_notif->bt_status; - queue_work(priv->workqueue, - &priv->bt_traffic_change_work); - } - return 0; -} - -void iwl_setup_rx_scan_handlers(struct iwl_priv *priv) -{ - /* scan handlers */ - priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan; - priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif; - priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] = - iwl_rx_scan_results_notif; - priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] = - iwl_rx_scan_complete_notif; -} - -static u16 iwl_get_active_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band, u8 n_probes) -{ - if (band == IEEE80211_BAND_5GHZ) - return IWL_ACTIVE_DWELL_TIME_52 + - IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1); - else - return IWL_ACTIVE_DWELL_TIME_24 + - IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1); -} - -static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time) -{ - struct iwl_rxon_context *ctx; - - /* - * If we're associated, we clamp the dwell time 98% - * of the smallest beacon interval (minus 2 * channel - * tune time) - */ - for_each_context(priv, ctx) { - u16 value; - - switch (ctx->staging.dev_type) { - case RXON_DEV_TYPE_P2P: - /* no timing constraints */ - continue; - case RXON_DEV_TYPE_ESS: - default: - /* timing constraints if associated */ - if (!iwl_is_associated_ctx(ctx)) - continue; - break; - case RXON_DEV_TYPE_CP: - case RXON_DEV_TYPE_2STA: - /* - * These seem to always have timers for TBTT - * active in uCode even when not associated yet. - */ - break; - } - - value = ctx->beacon_int; - if (!value) - value = IWL_PASSIVE_DWELL_BASE; - value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2; - dwell_time = min(value, dwell_time); - } - - return dwell_time; -} - -static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv, - enum ieee80211_band band) -{ - u16 passive = (band == IEEE80211_BAND_2GHZ) ? - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 : - IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52; - - return iwl_limit_dwell(priv, passive); -} - -static int iwl_get_single_channel_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - struct iwl_scan_channel *scan_ch) -{ - const struct ieee80211_supported_band *sband; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added = 0; - u16 channel = 0; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) { - IWL_ERR(priv, "invalid band\n"); - return added; - } - - active_dwell = iwl_get_active_dwell_time(priv, band, 0); - passive_dwell = iwl_get_passive_dwell_time(priv, band); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - channel = iwl_get_single_channel_number(priv, band); - if (channel) { - scan_ch->channel = cpu_to_le16(channel); - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - added++; - } else - IWL_ERR(priv, "no valid channel found\n"); - return added; -} - -static int iwl_get_channels_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - u8 is_active, u8 n_probes, - struct iwl_scan_channel *scan_ch) -{ - struct ieee80211_channel *chan; - const struct ieee80211_supported_band *sband; - const struct iwl_channel_info *ch_info; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added, i; - u16 channel; - - sband = iwl_get_hw_mode(priv, band); - if (!sband) - return 0; - - active_dwell = iwl_get_active_dwell_time(priv, band, n_probes); - passive_dwell = iwl_get_passive_dwell_time(priv, band); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - - for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { - chan = priv->scan_request->channels[i]; - - if (chan->band != band) - continue; - - channel = chan->hw_value; - scan_ch->channel = cpu_to_le16(channel); - - ch_info = iwl_get_channel_info(priv, band, channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN(priv, - "Channel %d is INVALID for this band.\n", - channel); - continue; - } - - if (!is_active || is_channel_passive(ch_info) || - (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - - if (n_probes) - scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); - - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); - - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - if (band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - - IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", - channel, le32_to_cpu(scan_ch->type), - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - "ACTIVE" : "PASSIVE", - (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? - active_dwell : passive_dwell); - - scan_ch++; - added++; - } - - IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); - return added; -} - -/** - * iwl_fill_probe_req - fill in all required fields and IE for probe request - */ - -static u16 iwl_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta, - const u8 *ies, int ie_len, int left) -{ - int len = 0; - u8 *pos = NULL; - - /* Make sure there is enough space for the probe request, - * two mandatory IEs and the data */ - left -= 24; - if (left < 0) - return 0; - - frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); - memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); - memcpy(frame->sa, ta, ETH_ALEN); - memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); - frame->seq_ctrl = 0; - - len += 24; - - /* ...next IE... */ - pos = &frame->u.probe_req.variable[0]; - - /* fill in our indirect SSID IE */ - left -= 2; - if (left < 0) - return 0; - *pos++ = WLAN_EID_SSID; - *pos++ = 0; - - len += 2; - - if (WARN_ON(left < ie_len)) - return len; - - if (ies && ie_len) { - memcpy(pos, ies, ie_len); - len += ie_len; - } - - return (u16)len; -} - -static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) -{ - struct iwl_host_cmd cmd = { - .id = REPLY_SCAN_CMD, - .len = { sizeof(struct iwl_scan_cmd), }, - .flags = CMD_SYNC, - }; - struct iwl_scan_cmd *scan; - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - u32 rate_flags = 0; - u16 cmd_len = 0; - u16 rx_chain = 0; - enum ieee80211_band band; - u8 n_probes = 0; - u8 rx_ant = hw_params(priv).valid_rx_ant; - u8 rate; - bool is_active = false; - int chan_mod; - u8 active_chains; - u8 scan_tx_antennas = hw_params(priv).valid_tx_ant; - int ret; - - lockdep_assert_held(&priv->mutex); - - if (vif) - ctx = iwl_rxon_ctx_from_vif(vif); - - if (!priv->scan_cmd) { - priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) + - IWL_MAX_SCAN_SIZE, GFP_KERNEL); - if (!priv->scan_cmd) { - IWL_DEBUG_SCAN(priv, - "fail to allocate memory for scan\n"); - return -ENOMEM; - } - } - scan = priv->scan_cmd; - memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); - - scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; - scan->quiet_time = IWL_ACTIVE_QUIET_TIME; - - if (priv->scan_type != IWL_SCAN_ROC && - iwl_is_any_associated(priv)) { - u16 interval = 0; - u32 extra; - u32 suspend_time = 100; - u32 scan_suspend_time = 100; - - IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); - switch (priv->scan_type) { - case IWL_SCAN_ROC: - WARN_ON(1); - break; - case IWL_SCAN_RADIO_RESET: - interval = 0; - break; - case IWL_SCAN_NORMAL: - interval = vif->bss_conf.beacon_int; - break; - } - - scan->suspend_time = 0; - scan->max_out_time = cpu_to_le32(200 * 1024); - if (!interval) - interval = suspend_time; - - extra = (suspend_time / interval) << 22; - scan_suspend_time = (extra | - ((suspend_time % interval) * 1024)); - scan->suspend_time = cpu_to_le32(scan_suspend_time); - IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", - scan_suspend_time, interval); - } else if (priv->scan_type == IWL_SCAN_ROC) { - scan->suspend_time = 0; - scan->max_out_time = 0; - scan->quiet_time = 0; - scan->quiet_plcp_th = 0; - } - - switch (priv->scan_type) { - case IWL_SCAN_RADIO_RESET: - IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); - break; - case IWL_SCAN_NORMAL: - if (priv->scan_request->n_ssids) { - int i, p = 0; - IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); - for (i = 0; i < priv->scan_request->n_ssids; i++) { - /* always does wildcard anyway */ - if (!priv->scan_request->ssids[i].ssid_len) - continue; - scan->direct_scan[p].id = WLAN_EID_SSID; - scan->direct_scan[p].len = - priv->scan_request->ssids[i].ssid_len; - memcpy(scan->direct_scan[p].ssid, - priv->scan_request->ssids[i].ssid, - priv->scan_request->ssids[i].ssid_len); - n_probes++; - p++; - } - is_active = true; - } else - IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); - break; - case IWL_SCAN_ROC: - IWL_DEBUG_SCAN(priv, "Start ROC scan.\n"); - break; - } - - scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; - scan->tx_cmd.sta_id = ctx->bcast_sta_id; - scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - switch (priv->scan_band) { - case IEEE80211_BAND_2GHZ: - scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - chan_mod = le32_to_cpu( - priv->contexts[IWL_RXON_CTX_BSS].active.flags & - RXON_FLG_CHANNEL_MODE_MSK) - >> RXON_FLG_CHANNEL_MODE_POS; - if ((priv->scan_request && priv->scan_request->no_cck) || - chan_mod == CHANNEL_MODE_PURE_40) { - rate = IWL_RATE_6M_PLCP; - } else { - rate = IWL_RATE_1M_PLCP; - rate_flags = RATE_MCS_CCK_MSK; - } - /* - * Internal scans are passive, so we can indiscriminately set - * the BT ignore flag on 2.4 GHz since it applies to TX only. - */ - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) - scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT; - break; - case IEEE80211_BAND_5GHZ: - rate = IWL_RATE_6M_PLCP; - break; - default: - IWL_WARN(priv, "Invalid scan band\n"); - return -EIO; - } - - /* - * If active scanning is requested but a certain channel is - * marked passive, we can do active scanning if we detect - * transmissions. - * - * There is an issue with some firmware versions that triggers - * a sysassert on a "good CRC threshold" of zero (== disabled), - * on a radar channel even though this means that we should NOT - * send probes. - * - * The "good CRC threshold" is the number of frames that we - * need to receive during our dwell time on a channel before - * sending out probes -- setting this to a huge value will - * mean we never reach it, but at the same time work around - * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER - * here instead of IWL_GOOD_CRC_TH_DISABLED. - * - * This was fixed in later versions along with some other - * scan changes, and the threshold behaves as a flag in those - * versions. - */ - if (priv->new_scan_threshold_behaviour) - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_DISABLED; - else - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : - IWL_GOOD_CRC_TH_NEVER; - - band = priv->scan_band; - - if (cfg(priv)->scan_rx_antennas[band]) - rx_ant = cfg(priv)->scan_rx_antennas[band]; - - if (band == IEEE80211_BAND_2GHZ && - cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - /* transmit 2.4 GHz probes only on first antenna */ - scan_tx_antennas = first_antenna(scan_tx_antennas); - } - - priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, - priv->scan_tx_ant[band], - scan_tx_antennas); - rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]); - scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags); - - /* In power save mode use one chain, otherwise use all chains */ - if (test_bit(STATUS_POWER_PMI, &priv->shrd->status)) { - /* rx_ant has been set to all valid chains previously */ - active_chains = rx_ant & - ((u8)(priv->chain_noise_data.active_chains)); - if (!active_chains) - active_chains = rx_ant; - - IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", - priv->chain_noise_data.active_chains); - - rx_ant = first_antenna(active_chains); - } - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist && - priv->bt_full_concurrent) { - /* operated as 1x1 in full concurrency mode */ - rx_ant = first_antenna(rx_ant); - } - - /* MIMO is not used here, but value is required */ - rx_chain |= - hw_params(priv).valid_rx_ant << RXON_RX_CHAIN_VALID_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; - rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; - rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; - scan->rx_chain = cpu_to_le16(rx_chain); - switch (priv->scan_type) { - case IWL_SCAN_NORMAL: - cmd_len = iwl_fill_probe_req( - (struct ieee80211_mgmt *)scan->data, - vif->addr, - priv->scan_request->ie, - priv->scan_request->ie_len, - IWL_MAX_SCAN_SIZE - sizeof(*scan)); - break; - case IWL_SCAN_RADIO_RESET: - case IWL_SCAN_ROC: - /* use bcast addr, will not be transmitted but must be valid */ - cmd_len = iwl_fill_probe_req( - (struct ieee80211_mgmt *)scan->data, - iwl_bcast_addr, NULL, 0, - IWL_MAX_SCAN_SIZE - sizeof(*scan)); - break; - default: - BUG(); - } - scan->tx_cmd.len = cpu_to_le16(cmd_len); - - scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | - RXON_FILTER_BCON_AWARE_MSK); - - switch (priv->scan_type) { - case IWL_SCAN_RADIO_RESET: - scan->channel_count = - iwl_get_single_channel_for_scan(priv, vif, band, - (void *)&scan->data[cmd_len]); - break; - case IWL_SCAN_NORMAL: - scan->channel_count = - iwl_get_channels_for_scan(priv, vif, band, - is_active, n_probes, - (void *)&scan->data[cmd_len]); - break; - case IWL_SCAN_ROC: { - struct iwl_scan_channel *scan_ch; - int n_chan, i; - u16 dwell; - - dwell = iwl_limit_dwell(priv, priv->hw_roc_duration); - n_chan = DIV_ROUND_UP(priv->hw_roc_duration, dwell); - - scan->channel_count = n_chan; - - scan_ch = (void *)&scan->data[cmd_len]; - - for (i = 0; i < n_chan; i++) { - scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - scan_ch->channel = - cpu_to_le16(priv->hw_roc_channel->hw_value); - - if (i == n_chan - 1) - dwell = priv->hw_roc_duration - i * dwell; - - scan_ch->active_dwell = - scan_ch->passive_dwell = cpu_to_le16(dwell); - - /* Set txpower levels to defaults */ - scan_ch->dsp_atten = 110; - - /* NOTE: if we were doing 6Mb OFDM for scans we'd use - * power level: - * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; - */ - if (priv->hw_roc_channel->band == IEEE80211_BAND_5GHZ) - scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; - else - scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - - scan_ch++; - } - } - - break; - } - - if (scan->channel_count == 0) { - IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); - return -EIO; - } - - cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) + - scan->channel_count * sizeof(struct iwl_scan_channel); - cmd.data[0] = scan; - cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - scan->len = cpu_to_le16(cmd.len[0]); - - /* set scan bit here for PAN params */ - set_bit(STATUS_SCAN_HW, &priv->status); - - ret = iwlagn_set_pan_params(priv); - if (ret) - return ret; - - ret = iwl_dvm_send_cmd(priv, &cmd); - if (ret) { - clear_bit(STATUS_SCAN_HW, &priv->status); - iwlagn_set_pan_params(priv); - } - - return ret; -} - -void iwl_init_scan_params(struct iwl_priv *priv) -{ - u8 ant_idx = fls(hw_params(priv).valid_tx_ant) - 1; - if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx; - if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) - priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx; -} - -int __must_check iwl_scan_initiate(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum iwl_scan_type scan_type, - enum ieee80211_band band) -{ - int ret; - - lockdep_assert_held(&priv->mutex); - - cancel_delayed_work(&priv->scan_check); - - if (!iwl_is_ready_rf(priv)) { - IWL_WARN(priv, "Request scan called when driver not ready.\n"); - return -EIO; - } - - if (test_bit(STATUS_SCAN_HW, &priv->status)) { - IWL_DEBUG_SCAN(priv, - "Multiple concurrent scan requests in parallel.\n"); - return -EBUSY; - } - - if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n"); - return -EBUSY; - } - - IWL_DEBUG_SCAN(priv, "Starting %sscan...\n", - scan_type == IWL_SCAN_NORMAL ? "" : - scan_type == IWL_SCAN_ROC ? "remain-on-channel " : - "internal short "); - - set_bit(STATUS_SCANNING, &priv->status); - priv->scan_type = scan_type; - priv->scan_start = jiffies; - priv->scan_band = band; - - ret = iwlagn_request_scan(priv, vif); - if (ret) { - clear_bit(STATUS_SCANNING, &priv->status); - priv->scan_type = IWL_SCAN_NORMAL; - return ret; - } - - queue_delayed_work(priv->workqueue, &priv->scan_check, - IWL_SCAN_CHECK_WATCHDOG); - - return 0; -} - - -/* - * internal short scan, this function should only been called while associated. - * It will reset and tune the radio to prevent possible RF related problem - */ -void iwl_internal_short_hw_scan(struct iwl_priv *priv) -{ - queue_work(priv->workqueue, &priv->start_internal_scan); -} - -static void iwl_bg_start_internal_scan(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, start_internal_scan); - - IWL_DEBUG_SCAN(priv, "Start internal scan\n"); - - mutex_lock(&priv->mutex); - - if (priv->scan_type == IWL_SCAN_RADIO_RESET) { - IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n"); - goto unlock; - } - - if (test_bit(STATUS_SCANNING, &priv->status)) { - IWL_DEBUG_SCAN(priv, "Scan already in progress.\n"); - goto unlock; - } - - if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band)) - IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n"); - unlock: - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_scan_check(struct work_struct *data) -{ - struct iwl_priv *priv = - container_of(data, struct iwl_priv, scan_check.work); - - IWL_DEBUG_SCAN(priv, "Scan check work\n"); - - /* Since we are here firmware does not finish scan and - * most likely is in bad shape, so we don't bother to - * send abort command, just force scan complete to mac80211 */ - mutex_lock(&priv->mutex); - iwl_force_scan_end(priv); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_abort_scan(struct work_struct *work) -{ - struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan); - - IWL_DEBUG_SCAN(priv, "Abort scan work\n"); - - /* We keep scan_check work queued in case when firmware will not - * report back scan completed notification */ - mutex_lock(&priv->mutex); - iwl_scan_cancel_timeout(priv, 200); - mutex_unlock(&priv->mutex); -} - -static void iwl_bg_scan_completed(struct work_struct *work) -{ - struct iwl_priv *priv = - container_of(work, struct iwl_priv, scan_completed); - - mutex_lock(&priv->mutex); - iwl_process_scan_complete(priv); - mutex_unlock(&priv->mutex); -} - -void iwl_setup_scan_deferred_work(struct iwl_priv *priv) -{ - INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed); - INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan); - INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan); - INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check); -} - -void iwl_cancel_scan_deferred_work(struct iwl_priv *priv) -{ - cancel_work_sync(&priv->start_internal_scan); - cancel_work_sync(&priv->abort_scan); - cancel_work_sync(&priv->scan_completed); - - if (cancel_delayed_work_sync(&priv->scan_check)) { - mutex_lock(&priv->mutex); - iwl_force_scan_end(priv); - mutex_unlock(&priv->mutex); - } -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h deleted file mode 100644 index b515d657..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-shared.h +++ /dev/null @@ -1,435 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_shared_h__ -#define __iwl_shared_h__ - -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/gfp.h> -#include <net/mac80211.h> - -#include "iwl-commands.h" -#include "iwl-fw.h" - -/** - * DOC: shared area - role and goal - * - * The shared area contains all the data exported by the upper layer to the - * other layers. Since the bus and transport layer shouldn't dereference - * iwl_priv, all the data needed by the upper layer and the transport / bus - * layer must be here. - * The shared area also holds pointer to all the other layers. This allows a - * layer to call a function from another layer. - * - * NOTE: All the layers hold a pointer to the shared area which must be shrd. - * A few macros assume that (_m)->shrd points to the shared area no matter - * what _m is. - * - * gets notifications about enumeration, suspend, resume. - * For the moment, the bus layer is not a linux kernel module as itself, and - * the module_init function of the driver must call the bus specific - * registration functions. These functions are listed at the end of this file. - * For the moment, there is only one implementation of this interface: PCI-e. - * This implementation is iwl-pci.c - */ - -struct iwl_priv; -struct iwl_trans; -struct iwl_sensitivity_ranges; -struct iwl_trans_ops; - -#define DRV_NAME "iwlwifi" -#define IWLWIFI_VERSION "in-tree:" -#define DRV_COPYRIGHT "Copyright(c) 2003-2012 Intel Corporation" -#define DRV_AUTHOR "<ilw@linux.intel.com>" - -extern struct iwl_mod_params iwlagn_mod_params; - -#define IWL_DISABLE_HT_ALL BIT(0) -#define IWL_DISABLE_HT_TXAGG BIT(1) -#define IWL_DISABLE_HT_RXAGG BIT(2) - -/** - * struct iwl_mod_params - * - * Holds the module parameters - * - * @sw_crypto: using hardware encryption, default = 0 - * @disable_11n: disable 11n capabilities, default = 0, - * use IWL_DISABLE_HT_* constants - * @amsdu_size_8K: enable 8K amsdu size, default = 1 - * @antenna: both antennas (use diversity), default = 0 - * @restart_fw: restart firmware, default = 1 - * @plcp_check: enable plcp health check, default = true - * @ack_check: disable ack health check, default = false - * @wd_disable: enable stuck queue check, default = 0 - * @bt_coex_active: enable bt coex, default = true - * @led_mode: system default, default = 0 - * @no_sleep_autoadjust: disable autoadjust, default = true - * @power_save: disable power save, default = false - * @power_level: power level, default = 1 - * @debug_level: levels are IWL_DL_* - * @ant_coupling: antenna coupling in dB, default = 0 - * @bt_ch_announce: BT channel inhibition, default = enable - * @wanted_ucode_alternative: ucode alternative to use, default = 1 - * @auto_agg: enable agg. without check, default = true - */ -struct iwl_mod_params { - int sw_crypto; - unsigned int disable_11n; - int amsdu_size_8K; - int antenna; - int restart_fw; - bool plcp_check; - bool ack_check; - int wd_disable; - bool bt_coex_active; - int led_mode; - bool no_sleep_autoadjust; - bool power_save; - int power_level; - u32 debug_level; - int ant_coupling; - bool bt_ch_announce; - int wanted_ucode_alternative; - bool auto_agg; -}; - -/** - * struct iwl_hw_params - * - * Holds the module parameters - * - * @num_ampdu_queues: num of ampdu queues - * @tx_chains_num: Number of TX chains - * @rx_chains_num: Number of RX chains - * @valid_tx_ant: usable antennas for TX - * @valid_rx_ant: usable antennas for RX - * @ht40_channel: is 40MHz width possible: BIT(IEEE80211_BAND_XXX) - * @sku: sku read from EEPROM - * @rx_page_order: Rx buffer page order - * @ct_kill_threshold: temperature threshold - in hw dependent unit - * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit - * relevant for 1000, 6000 and up - * @wd_timeout: TX queues watchdog timeout - * @struct iwl_sensitivity_ranges: range of sensitivity values - * @use_rts_for_aggregation: use rts/cts protection for HT traffic - */ -struct iwl_hw_params { - u8 num_ampdu_queues; - u8 tx_chains_num; - u8 rx_chains_num; - u8 valid_tx_ant; - u8 valid_rx_ant; - u8 ht40_channel; - bool use_rts_for_aggregation; - u16 sku; - u32 rx_page_order; - u32 ct_kill_threshold; - u32 ct_kill_exit_threshold; - unsigned int wd_timeout; - - const struct iwl_sensitivity_ranges *sens; -}; - -/* - * LED mode - * IWL_LED_DEFAULT: use device default - * IWL_LED_RF_STATE: turn LED on/off based on RF state - * LED ON = RF ON - * LED OFF = RF OFF - * IWL_LED_BLINK: adjust led blink rate based on blink table - * IWL_LED_DISABLE: led disabled - */ -enum iwl_led_mode { - IWL_LED_DEFAULT, - IWL_LED_RF_STATE, - IWL_LED_BLINK, - IWL_LED_DISABLE, -}; - -/* - * @max_ll_items: max number of OTP blocks - * @shadow_ram_support: shadow support for OTP memory - * @led_compensation: compensate on the led on/off time per HW according - * to the deviation to achieve the desired led frequency. - * The detail algorithm is described in iwl-led.c - * @chain_noise_num_beacons: number of beacons used to compute chain noise - * @adv_thermal_throttle: support advance thermal throttle - * @support_ct_kill_exit: support ct kill exit condition - * @support_wimax_coexist: support wimax/wifi co-exist - * @plcp_delta_threshold: plcp error rate threshold used to trigger - * radio tuning when there is a high receiving plcp error rate - * @chain_noise_scale: default chain noise scale used for gain computation - * @wd_timeout: TX queues watchdog timeout - * @max_event_log_size: size of event log buffer size for ucode event logging - * @shadow_reg_enable: HW shadhow register bit - * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up - * @no_idle_support: do not support idle mode - * wd_disable: disable watchdog timer - */ -struct iwl_base_params { - int eeprom_size; - int num_of_queues; /* def: HW dependent */ - int num_of_ampdu_queues;/* def: HW dependent */ - /* for iwl_apm_init() */ - u32 pll_cfg_val; - - const u16 max_ll_items; - const bool shadow_ram_support; - u16 led_compensation; - bool adv_thermal_throttle; - bool support_ct_kill_exit; - const bool support_wimax_coexist; - u8 plcp_delta_threshold; - s32 chain_noise_scale; - unsigned int wd_timeout; - u32 max_event_log_size; - const bool shadow_reg_enable; - const bool hd_v2; - const bool no_idle_support; - const bool wd_disable; -}; - -/* - * @advanced_bt_coexist: support advanced bt coexist - * @bt_init_traffic_load: specify initial bt traffic load - * @bt_prio_boost: default bt priority boost value - * @agg_time_limit: maximum number of uSec in aggregation - * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode - */ -struct iwl_bt_params { - bool advanced_bt_coexist; - u8 bt_init_traffic_load; - u8 bt_prio_boost; - u16 agg_time_limit; - bool bt_sco_disable; - bool bt_session_2; -}; -/* - * @use_rts_for_aggregation: use rts/cts protection for HT traffic - */ -struct iwl_ht_params { - const bool ht_greenfield_support; /* if used set to true */ - bool use_rts_for_aggregation; - enum ieee80211_smps_mode smps_mode; -}; - -/** - * struct iwl_cfg - * @name: Offical name of the device - * @fw_name_pre: Firmware filename prefix. The api version and extension - * (.ucode) will be added to filename before loading from disk. The - * filename is constructed as fw_name_pre<api>.ucode. - * @ucode_api_max: Highest version of uCode API supported by driver. - * @ucode_api_ok: oldest version of the uCode API that is OK to load - * without a warning, for use in transitions - * @ucode_api_min: Lowest version of uCode API supported by driver. - * @max_inst_size: The maximal length of the fw inst section - * @max_data_size: The maximal length of the fw data section - * @valid_tx_ant: valid transmit antenna - * @valid_rx_ant: valid receive antenna - * @eeprom_ver: EEPROM version - * @eeprom_calib_ver: EEPROM calibration version - * @lib: pointer to the lib ops - * @additional_nic_config: additional nic configuration - * @base_params: pointer to basic parameters - * @ht_params: point to ht patameters - * @bt_params: pointer to bt parameters - * @need_temp_offset_calib: need to perform temperature offset calibration - * @no_xtal_calib: some devices do not need crystal calibration data, - * don't send it to those - * @scan_rx_antennas: available antenna for scan operation - * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) - * @adv_pm: advance power management - * @rx_with_siso_diversity: 1x1 device with rx antenna diversity - * @internal_wimax_coex: internal wifi/wimax combo device - * @iq_invert: I/Q inversion - * @temp_offset_v2: support v2 of temperature offset calibration - * - * We enable the driver to be backward compatible wrt API version. The - * driver specifies which APIs it supports (with @ucode_api_max being the - * highest and @ucode_api_min the lowest). Firmware will only be loaded if - * it has a supported API version. - * - * The ideal usage of this infrastructure is to treat a new ucode API - * release as a new hardware revision. - */ -struct iwl_cfg { - /* params specific to an individual device within a device family */ - const char *name; - const char *fw_name_pre; - const unsigned int ucode_api_max; - const unsigned int ucode_api_ok; - const unsigned int ucode_api_min; - const u32 max_data_size; - const u32 max_inst_size; - u8 valid_tx_ant; - u8 valid_rx_ant; - u16 eeprom_ver; - u16 eeprom_calib_ver; - const struct iwl_lib_ops *lib; - void (*additional_nic_config)(struct iwl_priv *priv); - /* params not likely to change within a device family */ - const struct iwl_base_params *base_params; - /* params likely to change within a device family */ - const struct iwl_ht_params *ht_params; - const struct iwl_bt_params *bt_params; - const bool need_temp_offset_calib; /* if used set to true */ - const bool no_xtal_calib; - u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; - enum iwl_led_mode led_mode; - const bool adv_pm; - const bool rx_with_siso_diversity; - const bool internal_wimax_coex; - const bool iq_invert; - const bool temp_offset_v2; -}; - -/** - * struct iwl_shared - shared fields for all the layers of the driver - * - * @status: STATUS_* - * @wowlan: are we running wowlan uCode - * @valid_contexts: microcode/device supports multiple contexts - * @bus: pointer to the bus layer data - * @cfg: see struct iwl_cfg - * @priv: pointer to the upper layer data - * @trans: pointer to the transport layer data - * @nic: pointer to the nic data - * @hw_params: see struct iwl_hw_params - * @lock: protect general shared data - * @eeprom: pointer to the eeprom/OTP image - * @ucode_type: indicator of loaded ucode image - * @device_pointers: pointers to ucode event tables - */ -struct iwl_shared { - unsigned long status; - u8 valid_contexts; - - const struct iwl_cfg *cfg; - struct iwl_trans *trans; - void *drv; - struct iwl_hw_params hw_params; - const struct iwl_fw *fw; - - /* eeprom -- this is in the card's little endian byte order */ - u8 *eeprom; - - /* ucode related variables */ - enum iwl_ucode_type ucode_type; - - struct { - u32 error_event_table; - u32 log_event_table; - } device_pointers; - -}; - -/*Whatever _m is (iwl_trans, iwl_priv, these macros will work */ -#define cfg(_m) ((_m)->shrd->cfg) -#define trans(_m) ((_m)->shrd->trans) -#define hw_params(_m) ((_m)->shrd->hw_params) - -static inline bool iwl_have_debug_level(u32 level) -{ - return iwlagn_mod_params.debug_level & level; -} - -enum iwl_rxon_context_id { - IWL_RXON_CTX_BSS, - IWL_RXON_CTX_PAN, - - NUM_IWL_RXON_CTX -}; - -int iwlagn_hw_valid_rtc_data_addr(u32 addr); -const char *get_cmd_string(u8 cmd); - -#define IWL_CMD(x) case x: return #x - -/***************************************************** -* DRIVER STATUS FUNCTIONS -******************************************************/ -#define STATUS_HCMD_ACTIVE 0 /* host command in progress */ -/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */ -#define STATUS_INT_ENABLED 2 -#define STATUS_RF_KILL_HW 3 -#define STATUS_CT_KILL 4 -#define STATUS_INIT 5 -#define STATUS_ALIVE 6 -#define STATUS_READY 7 -#define STATUS_TEMPERATURE 8 -#define STATUS_GEO_CONFIGURED 9 -#define STATUS_EXIT_PENDING 10 -#define STATUS_STATISTICS 12 -#define STATUS_SCANNING 13 -#define STATUS_SCAN_ABORTING 14 -#define STATUS_SCAN_HW 15 -#define STATUS_POWER_PMI 16 -#define STATUS_FW_ERROR 17 -#define STATUS_DEVICE_ENABLED 18 -#define STATUS_CHANNEL_SWITCH_PENDING 19 -#define STATUS_SCAN_COMPLETE 20 - -#endif /* #__iwl_shared_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-testmode.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-testmode.c deleted file mode 100644 index 76f7f925..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-testmode.c +++ /dev/null @@ -1,1101 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/dma-mapping.h> -#include <net/net_namespace.h> -#include <linux/netdevice.h> -#include <net/cfg80211.h> -#include <net/mac80211.h> -#include <net/netlink.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-debug.h" -#include "iwl-io.h" -#include "iwl-agn.h" -#include "iwl-testmode.h" -#include "iwl-trans.h" -#include "iwl-fh.h" -#include "iwl-prph.h" - - -/* Periphery registers absolute lower bound. This is used in order to - * differentiate registery access through HBUS_TARG_PRPH_* and - * HBUS_TARG_MEM_* accesses. - */ -#define IWL_TM_ABS_PRPH_START (0xA00000) - -/* The TLVs used in the gnl message policy between the kernel module and - * user space application. iwl_testmode_gnl_msg_policy is to be carried - * through the NL80211_CMD_TESTMODE channel regulated by nl80211. - * See iwl-testmode.h - */ -static -struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = { - [IWL_TM_ATTR_COMMAND] = { .type = NLA_U32, }, - - [IWL_TM_ATTR_UCODE_CMD_ID] = { .type = NLA_U8, }, - [IWL_TM_ATTR_UCODE_CMD_DATA] = { .type = NLA_UNSPEC, }, - - [IWL_TM_ATTR_REG_OFFSET] = { .type = NLA_U32, }, - [IWL_TM_ATTR_REG_VALUE8] = { .type = NLA_U8, }, - [IWL_TM_ATTR_REG_VALUE32] = { .type = NLA_U32, }, - - [IWL_TM_ATTR_SYNC_RSP] = { .type = NLA_UNSPEC, }, - [IWL_TM_ATTR_UCODE_RX_PKT] = { .type = NLA_UNSPEC, }, - - [IWL_TM_ATTR_EEPROM] = { .type = NLA_UNSPEC, }, - - [IWL_TM_ATTR_TRACE_ADDR] = { .type = NLA_UNSPEC, }, - [IWL_TM_ATTR_TRACE_DUMP] = { .type = NLA_UNSPEC, }, - [IWL_TM_ATTR_TRACE_SIZE] = { .type = NLA_U32, }, - - [IWL_TM_ATTR_FIXRATE] = { .type = NLA_U32, }, - - [IWL_TM_ATTR_UCODE_OWNER] = { .type = NLA_U8, }, - - [IWL_TM_ATTR_MEM_ADDR] = { .type = NLA_U32, }, - [IWL_TM_ATTR_BUFFER_SIZE] = { .type = NLA_U32, }, - [IWL_TM_ATTR_BUFFER_DUMP] = { .type = NLA_UNSPEC, }, - - [IWL_TM_ATTR_FW_VERSION] = { .type = NLA_U32, }, - [IWL_TM_ATTR_DEVICE_ID] = { .type = NLA_U32, }, - [IWL_TM_ATTR_FW_TYPE] = { .type = NLA_U32, }, - [IWL_TM_ATTR_FW_INST_SIZE] = { .type = NLA_U32, }, - [IWL_TM_ATTR_FW_DATA_SIZE] = { .type = NLA_U32, }, - - [IWL_TM_ATTR_ENABLE_NOTIFICATION] = {.type = NLA_FLAG, }, -}; - -/* - * See the struct iwl_rx_packet in iwl-commands.h for the format of the - * received events from the device - */ -static inline int get_event_length(struct iwl_rx_cmd_buffer *rxb) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - if (pkt) - return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - else - return 0; -} - - -/* - * This function multicasts the spontaneous messages from the device to the - * user space. It is invoked whenever there is a received messages - * from the device. This function is called within the ISR of the rx handlers - * in iwlagn driver. - * - * The parsing of the message content is left to the user space application, - * The message content is treated as unattacked raw data and is encapsulated - * with IWL_TM_ATTR_UCODE_RX_PKT multicasting to the user space. - * - * @priv: the instance of iwlwifi device - * @rxb: pointer to rx data content received by the ISR - * - * See the message policies and TLVs in iwl_testmode_gnl_msg_policy[]. - * For the messages multicasting to the user application, the mandatory - * TLV fields are : - * IWL_TM_ATTR_COMMAND must be IWL_TM_CMD_DEV2APP_UCODE_RX_PKT - * IWL_TM_ATTR_UCODE_RX_PKT for carrying the message content - */ - -static void iwl_testmode_ucode_rx_pkt(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb) -{ - struct ieee80211_hw *hw = priv->hw; - struct sk_buff *skb; - void *data; - int length; - - data = (void *)rxb_addr(rxb); - length = get_event_length(rxb); - - if (!data || length == 0) - return; - - skb = cfg80211_testmode_alloc_event_skb(hw->wiphy, 20 + length, - GFP_ATOMIC); - if (skb == NULL) { - IWL_ERR(priv, - "Run out of memory for messages to user space ?\n"); - return; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, IWL_TM_CMD_DEV2APP_UCODE_RX_PKT); - /* the length doesn't include len_n_flags field, so add it manually */ - NLA_PUT(skb, IWL_TM_ATTR_UCODE_RX_PKT, length + sizeof(__le32), data); - cfg80211_testmode_event(skb, GFP_ATOMIC); - return; - -nla_put_failure: - kfree_skb(skb); - IWL_ERR(priv, "Ouch, overran buffer, check allocation!\n"); -} - -void iwl_testmode_init(struct iwl_priv *priv) -{ - priv->pre_rx_handler = NULL; - priv->testmode_trace.trace_enabled = false; - priv->testmode_mem.read_in_progress = false; -} - -static void iwl_mem_cleanup(struct iwl_priv *priv) -{ - if (priv->testmode_mem.read_in_progress) { - kfree(priv->testmode_mem.buff_addr); - priv->testmode_mem.buff_addr = NULL; - priv->testmode_mem.buff_size = 0; - priv->testmode_mem.num_chunks = 0; - priv->testmode_mem.read_in_progress = false; - } -} - -static void iwl_trace_cleanup(struct iwl_priv *priv) -{ - if (priv->testmode_trace.trace_enabled) { - if (priv->testmode_trace.cpu_addr && - priv->testmode_trace.dma_addr) - dma_free_coherent(trans(priv)->dev, - priv->testmode_trace.total_size, - priv->testmode_trace.cpu_addr, - priv->testmode_trace.dma_addr); - priv->testmode_trace.trace_enabled = false; - priv->testmode_trace.cpu_addr = NULL; - priv->testmode_trace.trace_addr = NULL; - priv->testmode_trace.dma_addr = 0; - priv->testmode_trace.buff_size = 0; - priv->testmode_trace.total_size = 0; - } -} - - -void iwl_testmode_cleanup(struct iwl_priv *priv) -{ - iwl_trace_cleanup(priv); - iwl_mem_cleanup(priv); -} - - -/* - * This function handles the user application commands to the ucode. - * - * It retrieves the mandatory fields IWL_TM_ATTR_UCODE_CMD_ID and - * IWL_TM_ATTR_UCODE_CMD_DATA and calls to the handler to send the - * host command to the ucode. - * - * If any mandatory field is missing, -ENOMSG is replied to the user space - * application; otherwise, waits for the host command to be sent and checks - * the return code. In case or error, it is returned, otherwise a reply is - * allocated and the reply RX packet - * is returned. - * - * @hw: ieee80211_hw object that represents the device - * @tb: gnl message fields from the user space - */ -static int iwl_testmode_ucode(struct ieee80211_hw *hw, struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_host_cmd cmd; - struct iwl_rx_packet *pkt; - struct sk_buff *skb; - void *reply_buf; - u32 reply_len; - int ret; - bool cmd_want_skb; - - memset(&cmd, 0, sizeof(struct iwl_host_cmd)); - - if (!tb[IWL_TM_ATTR_UCODE_CMD_ID] || - !tb[IWL_TM_ATTR_UCODE_CMD_DATA]) { - IWL_ERR(priv, "Missing ucode command mandatory fields\n"); - return -ENOMSG; - } - - cmd.flags = CMD_ON_DEMAND | CMD_SYNC; - cmd_want_skb = nla_get_flag(tb[IWL_TM_ATTR_UCODE_CMD_SKB]); - if (cmd_want_skb) - cmd.flags |= CMD_WANT_SKB; - - cmd.id = nla_get_u8(tb[IWL_TM_ATTR_UCODE_CMD_ID]); - cmd.data[0] = nla_data(tb[IWL_TM_ATTR_UCODE_CMD_DATA]); - cmd.len[0] = nla_len(tb[IWL_TM_ATTR_UCODE_CMD_DATA]); - cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY; - IWL_DEBUG_INFO(priv, "testmode ucode command ID 0x%x, flags 0x%x," - " len %d\n", cmd.id, cmd.flags, cmd.len[0]); - - ret = iwl_dvm_send_cmd(priv, &cmd); - if (ret) { - IWL_ERR(priv, "Failed to send hcmd\n"); - return ret; - } - if (!cmd_want_skb) - return ret; - - /* Handling return of SKB to the user */ - pkt = cmd.resp_pkt; - if (!pkt) { - IWL_ERR(priv, "HCMD received a null response packet\n"); - return ret; - } - - reply_len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, reply_len + 20); - reply_buf = kmalloc(reply_len, GFP_KERNEL); - if (!skb || !reply_buf) { - kfree_skb(skb); - kfree(reply_buf); - return -ENOMEM; - } - - /* The reply is in a page, that we cannot send to user space. */ - memcpy(reply_buf, &(pkt->hdr), reply_len); - iwl_free_resp(&cmd); - - NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, IWL_TM_CMD_DEV2APP_UCODE_RX_PKT); - NLA_PUT(skb, IWL_TM_ATTR_UCODE_RX_PKT, reply_len, reply_buf); - return cfg80211_testmode_reply(skb); - -nla_put_failure: - IWL_DEBUG_INFO(priv, "Failed creating NL attributes\n"); - return -ENOMSG; -} - - -/* - * This function handles the user application commands for register access. - * - * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the - * handlers respectively. - * - * If it's an unknown commdn ID, -ENOSYS is returned; or -ENOMSG if the - * mandatory fields(IWL_TM_ATTR_REG_OFFSET,IWL_TM_ATTR_REG_VALUE32, - * IWL_TM_ATTR_REG_VALUE8) are missing; Otherwise 0 is replied indicating - * the success of the command execution. - * - * If IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_READ32, the register read - * value is returned with IWL_TM_ATTR_REG_VALUE32. - * - * @hw: ieee80211_hw object that represents the device - * @tb: gnl message fields from the user space - */ -static int iwl_testmode_reg(struct ieee80211_hw *hw, struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - u32 ofs, val32, cmd; - u8 val8; - struct sk_buff *skb; - int status = 0; - - if (!tb[IWL_TM_ATTR_REG_OFFSET]) { - IWL_ERR(priv, "Missing register offset\n"); - return -ENOMSG; - } - ofs = nla_get_u32(tb[IWL_TM_ATTR_REG_OFFSET]); - IWL_INFO(priv, "testmode register access command offset 0x%x\n", ofs); - - /* Allow access only to FH/CSR/HBUS in direct mode. - Since we don't have the upper bounds for the CSR and HBUS segments, - we will use only the upper bound of FH for sanity check. */ - cmd = nla_get_u32(tb[IWL_TM_ATTR_COMMAND]); - if ((cmd == IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32 || - cmd == IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32 || - cmd == IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8) && - (ofs >= FH_MEM_UPPER_BOUND)) { - IWL_ERR(priv, "offset out of segment (0x0 - 0x%x)\n", - FH_MEM_UPPER_BOUND); - return -EINVAL; - } - - switch (cmd) { - case IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32: - val32 = iwl_read_direct32(trans(priv), ofs); - IWL_INFO(priv, "32bit value to read 0x%x\n", val32); - - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - return -ENOMEM; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_REG_VALUE32, val32); - status = cfg80211_testmode_reply(skb); - if (status < 0) - IWL_ERR(priv, "Error sending msg : %d\n", status); - break; - case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32: - if (!tb[IWL_TM_ATTR_REG_VALUE32]) { - IWL_ERR(priv, "Missing value to write\n"); - return -ENOMSG; - } else { - val32 = nla_get_u32(tb[IWL_TM_ATTR_REG_VALUE32]); - IWL_INFO(priv, "32bit value to write 0x%x\n", val32); - iwl_write_direct32(trans(priv), ofs, val32); - } - break; - case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8: - if (!tb[IWL_TM_ATTR_REG_VALUE8]) { - IWL_ERR(priv, "Missing value to write\n"); - return -ENOMSG; - } else { - val8 = nla_get_u8(tb[IWL_TM_ATTR_REG_VALUE8]); - IWL_INFO(priv, "8bit value to write 0x%x\n", val8); - iwl_write8(trans(priv), ofs, val8); - } - break; - default: - IWL_ERR(priv, "Unknown testmode register command ID\n"); - return -ENOSYS; - } - - return status; - -nla_put_failure: - kfree_skb(skb); - return -EMSGSIZE; -} - - -static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv) -{ - struct iwl_notification_wait calib_wait; - int ret; - - iwl_init_notification_wait(&priv->notif_wait, &calib_wait, - CALIBRATION_COMPLETE_NOTIFICATION, - NULL, NULL); - ret = iwl_init_alive_start(priv); - if (ret) { - IWL_ERR(priv, "Fail init calibration: %d\n", ret); - goto cfg_init_calib_error; - } - - ret = iwl_wait_notification(&priv->notif_wait, &calib_wait, 2 * HZ); - if (ret) - IWL_ERR(priv, "Error detecting" - " CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret); - return ret; - -cfg_init_calib_error: - iwl_remove_notification(&priv->notif_wait, &calib_wait); - return ret; -} - -/* - * This function handles the user application commands for driver. - * - * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the - * handlers respectively. - * - * If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned - * value of the actual command execution is replied to the user application. - * - * If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP - * is used for carry the message while IWL_TM_ATTR_COMMAND must set to - * IWL_TM_CMD_DEV2APP_SYNC_RSP. - * - * @hw: ieee80211_hw object that represents the device - * @tb: gnl message fields from the user space - */ -static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_trans *trans = trans(priv); - struct sk_buff *skb; - unsigned char *rsp_data_ptr = NULL; - int status = 0, rsp_data_len = 0; - u32 devid, inst_size = 0, data_size = 0; - const struct fw_img *img; - - switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) { - case IWL_TM_CMD_APP2DEV_GET_DEVICENAME: - rsp_data_ptr = (unsigned char *)cfg(priv)->name; - rsp_data_len = strlen(cfg(priv)->name); - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, - rsp_data_len + 20); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - return -ENOMEM; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, - IWL_TM_CMD_DEV2APP_SYNC_RSP); - NLA_PUT(skb, IWL_TM_ATTR_SYNC_RSP, - rsp_data_len, rsp_data_ptr); - status = cfg80211_testmode_reply(skb); - if (status < 0) - IWL_ERR(priv, "Error sending msg : %d\n", status); - break; - - case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW: - status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT); - if (status) - IWL_ERR(priv, "Error loading init ucode: %d\n", status); - break; - - case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB: - iwl_testmode_cfg_init_calib(priv); - priv->ucode_loaded = false; - iwl_trans_stop_device(trans); - break; - - case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW: - status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR); - if (status) { - IWL_ERR(priv, - "Error loading runtime ucode: %d\n", status); - break; - } - status = iwl_alive_start(priv); - if (status) - IWL_ERR(priv, - "Error starting the device: %d\n", status); - break; - - case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: - iwl_scan_cancel_timeout(priv, 200); - priv->ucode_loaded = false; - iwl_trans_stop_device(trans); - status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN); - if (status) { - IWL_ERR(priv, - "Error loading WOWLAN ucode: %d\n", status); - break; - } - status = iwl_alive_start(priv); - if (status) - IWL_ERR(priv, - "Error starting the device: %d\n", status); - break; - - case IWL_TM_CMD_APP2DEV_GET_EEPROM: - if (priv->shrd->eeprom) { - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, - cfg(priv)->base_params->eeprom_size + 20); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - return -ENOMEM; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_COMMAND, - IWL_TM_CMD_DEV2APP_EEPROM_RSP); - NLA_PUT(skb, IWL_TM_ATTR_EEPROM, - cfg(priv)->base_params->eeprom_size, - priv->shrd->eeprom); - status = cfg80211_testmode_reply(skb); - if (status < 0) - IWL_ERR(priv, "Error sending msg : %d\n", - status); - } else - return -EFAULT; - break; - - case IWL_TM_CMD_APP2DEV_FIXRATE_REQ: - if (!tb[IWL_TM_ATTR_FIXRATE]) { - IWL_ERR(priv, "Missing fixrate setting\n"); - return -ENOMSG; - } - priv->tm_fixed_rate = nla_get_u32(tb[IWL_TM_ATTR_FIXRATE]); - break; - - case IWL_TM_CMD_APP2DEV_GET_FW_VERSION: - IWL_INFO(priv, "uCode version raw: 0x%x\n", - priv->fw->ucode_ver); - - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - return -ENOMEM; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_FW_VERSION, - priv->fw->ucode_ver); - status = cfg80211_testmode_reply(skb); - if (status < 0) - IWL_ERR(priv, "Error sending msg : %d\n", status); - break; - - case IWL_TM_CMD_APP2DEV_GET_DEVICE_ID: - devid = trans(priv)->hw_id; - IWL_INFO(priv, "hw version: 0x%x\n", devid); - - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - return -ENOMEM; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_DEVICE_ID, devid); - status = cfg80211_testmode_reply(skb); - if (status < 0) - IWL_ERR(priv, "Error sending msg : %d\n", status); - break; - - case IWL_TM_CMD_APP2DEV_GET_FW_INFO: - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20 + 8); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - return -ENOMEM; - } - if (!priv->ucode_loaded) { - IWL_ERR(priv, "No uCode has not been loaded\n"); - return -EINVAL; - } else { - img = &priv->fw->img[priv->shrd->ucode_type]; - inst_size = img->sec[IWL_UCODE_SECTION_INST].len; - data_size = img->sec[IWL_UCODE_SECTION_DATA].len; - } - NLA_PUT_U32(skb, IWL_TM_ATTR_FW_TYPE, priv->shrd->ucode_type); - NLA_PUT_U32(skb, IWL_TM_ATTR_FW_INST_SIZE, inst_size); - NLA_PUT_U32(skb, IWL_TM_ATTR_FW_DATA_SIZE, data_size); - status = cfg80211_testmode_reply(skb); - if (status < 0) - IWL_ERR(priv, "Error sending msg : %d\n", status); - break; - - default: - IWL_ERR(priv, "Unknown testmode driver command ID\n"); - return -ENOSYS; - } - return status; - -nla_put_failure: - kfree_skb(skb); - return -EMSGSIZE; -} - - -/* - * This function handles the user application commands for uCode trace - * - * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the - * handlers respectively. - * - * If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned - * value of the actual command execution is replied to the user application. - * - * @hw: ieee80211_hw object that represents the device - * @tb: gnl message fields from the user space - */ -static int iwl_testmode_trace(struct ieee80211_hw *hw, struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct sk_buff *skb; - int status = 0; - struct device *dev = trans(priv)->dev; - - switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) { - case IWL_TM_CMD_APP2DEV_BEGIN_TRACE: - if (priv->testmode_trace.trace_enabled) - return -EBUSY; - - if (!tb[IWL_TM_ATTR_TRACE_SIZE]) - priv->testmode_trace.buff_size = TRACE_BUFF_SIZE_DEF; - else - priv->testmode_trace.buff_size = - nla_get_u32(tb[IWL_TM_ATTR_TRACE_SIZE]); - if (!priv->testmode_trace.buff_size) - return -EINVAL; - if (priv->testmode_trace.buff_size < TRACE_BUFF_SIZE_MIN || - priv->testmode_trace.buff_size > TRACE_BUFF_SIZE_MAX) - return -EINVAL; - - priv->testmode_trace.total_size = - priv->testmode_trace.buff_size + TRACE_BUFF_PADD; - priv->testmode_trace.cpu_addr = - dma_alloc_coherent(dev, - priv->testmode_trace.total_size, - &priv->testmode_trace.dma_addr, - GFP_KERNEL); - if (!priv->testmode_trace.cpu_addr) - return -ENOMEM; - priv->testmode_trace.trace_enabled = true; - priv->testmode_trace.trace_addr = (u8 *)PTR_ALIGN( - priv->testmode_trace.cpu_addr, 0x100); - memset(priv->testmode_trace.trace_addr, 0x03B, - priv->testmode_trace.buff_size); - skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, - sizeof(priv->testmode_trace.dma_addr) + 20); - if (!skb) { - IWL_ERR(priv, "Memory allocation fail\n"); - iwl_trace_cleanup(priv); - return -ENOMEM; - } - NLA_PUT(skb, IWL_TM_ATTR_TRACE_ADDR, - sizeof(priv->testmode_trace.dma_addr), - (u64 *)&priv->testmode_trace.dma_addr); - status = cfg80211_testmode_reply(skb); - if (status < 0) { - IWL_ERR(priv, "Error sending msg : %d\n", status); - } - priv->testmode_trace.num_chunks = - DIV_ROUND_UP(priv->testmode_trace.buff_size, - DUMP_CHUNK_SIZE); - break; - - case IWL_TM_CMD_APP2DEV_END_TRACE: - iwl_trace_cleanup(priv); - break; - default: - IWL_ERR(priv, "Unknown testmode mem command ID\n"); - return -ENOSYS; - } - return status; - -nla_put_failure: - kfree_skb(skb); - if (nla_get_u32(tb[IWL_TM_ATTR_COMMAND]) == - IWL_TM_CMD_APP2DEV_BEGIN_TRACE) - iwl_trace_cleanup(priv); - return -EMSGSIZE; -} - -static int iwl_testmode_trace_dump(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct netlink_callback *cb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int idx, length; - - if (priv->testmode_trace.trace_enabled && - priv->testmode_trace.trace_addr) { - idx = cb->args[4]; - if (idx >= priv->testmode_trace.num_chunks) - return -ENOENT; - length = DUMP_CHUNK_SIZE; - if (((idx + 1) == priv->testmode_trace.num_chunks) && - (priv->testmode_trace.buff_size % DUMP_CHUNK_SIZE)) - length = priv->testmode_trace.buff_size % - DUMP_CHUNK_SIZE; - - NLA_PUT(skb, IWL_TM_ATTR_TRACE_DUMP, length, - priv->testmode_trace.trace_addr + - (DUMP_CHUNK_SIZE * idx)); - idx++; - cb->args[4] = idx; - return 0; - } else - return -EFAULT; - - nla_put_failure: - return -ENOBUFS; -} - -/* - * This function handles the user application switch ucode ownership. - * - * It retrieves the mandatory fields IWL_TM_ATTR_UCODE_OWNER and - * decide who the current owner of the uCode - * - * If the current owner is OWNERSHIP_TM, then the only host command - * can deliver to uCode is from testmode, all the other host commands - * will dropped. - * - * default driver is the owner of uCode in normal operational mode - * - * @hw: ieee80211_hw object that represents the device - * @tb: gnl message fields from the user space - */ -static int iwl_testmode_ownership(struct ieee80211_hw *hw, struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - u8 owner; - - if (!tb[IWL_TM_ATTR_UCODE_OWNER]) { - IWL_ERR(priv, "Missing ucode owner\n"); - return -ENOMSG; - } - - owner = nla_get_u8(tb[IWL_TM_ATTR_UCODE_OWNER]); - if (owner == IWL_OWNERSHIP_DRIVER) { - priv->ucode_owner = owner; - priv->pre_rx_handler = NULL; - } else if (owner == IWL_OWNERSHIP_TM) { - priv->pre_rx_handler = iwl_testmode_ucode_rx_pkt; - priv->ucode_owner = owner; - } else { - IWL_ERR(priv, "Invalid owner\n"); - return -EINVAL; - } - return 0; -} - -static int iwl_testmode_indirect_read(struct iwl_priv *priv, u32 addr, u32 size) -{ - struct iwl_trans *trans = trans(priv); - unsigned long flags; - int i; - - if (size & 0x3) - return -EINVAL; - priv->testmode_mem.buff_size = size; - priv->testmode_mem.buff_addr = - kmalloc(priv->testmode_mem.buff_size, GFP_KERNEL); - if (priv->testmode_mem.buff_addr == NULL) - return -ENOMEM; - - /* Hard-coded periphery absolute address */ - if (IWL_TM_ABS_PRPH_START <= addr && - addr < IWL_TM_ABS_PRPH_START + PRPH_END) { - spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); - iwl_write32(trans, HBUS_TARG_PRPH_RADDR, - addr | (3 << 24)); - for (i = 0; i < size; i += 4) - *(u32 *)(priv->testmode_mem.buff_addr + i) = - iwl_read32(trans, HBUS_TARG_PRPH_RDAT); - iwl_release_nic_access(trans); - spin_unlock_irqrestore(&trans->reg_lock, flags); - } else { /* target memory (SRAM) */ - _iwl_read_targ_mem_words(trans, addr, - priv->testmode_mem.buff_addr, - priv->testmode_mem.buff_size / 4); - } - - priv->testmode_mem.num_chunks = - DIV_ROUND_UP(priv->testmode_mem.buff_size, DUMP_CHUNK_SIZE); - priv->testmode_mem.read_in_progress = true; - return 0; - -} - -static int iwl_testmode_indirect_write(struct iwl_priv *priv, u32 addr, - u32 size, unsigned char *buf) -{ - struct iwl_trans *trans = trans(priv); - u32 val, i; - unsigned long flags; - - if (IWL_TM_ABS_PRPH_START <= addr && - addr < IWL_TM_ABS_PRPH_START + PRPH_END) { - /* Periphery writes can be 1-3 bytes long, or DWORDs */ - if (size < 4) { - memcpy(&val, buf, size); - spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); - iwl_write32(trans, HBUS_TARG_PRPH_WADDR, - (addr & 0x0000FFFF) | - ((size - 1) << 24)); - iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); - iwl_release_nic_access(trans); - /* needed after consecutive writes w/o read */ - mmiowb(); - spin_unlock_irqrestore(&trans->reg_lock, flags); - } else { - if (size % 4) - return -EINVAL; - for (i = 0; i < size; i += 4) - iwl_write_prph(trans, addr+i, - *(u32 *)(buf+i)); - } - } else if (iwlagn_hw_valid_rtc_data_addr(addr) || - (IWLAGN_RTC_INST_LOWER_BOUND <= addr && - addr < IWLAGN_RTC_INST_UPPER_BOUND)) { - _iwl_write_targ_mem_words(trans, addr, buf, size/4); - } else - return -EINVAL; - return 0; -} - -/* - * This function handles the user application commands for SRAM data dump - * - * It retrieves the mandatory fields IWL_TM_ATTR_SRAM_ADDR and - * IWL_TM_ATTR_SRAM_SIZE to decide the memory area for SRAM data reading - * - * Several error will be retured, -EBUSY if the SRAM data retrieved by - * previous command has not been delivered to userspace, or -ENOMSG if - * the mandatory fields (IWL_TM_ATTR_SRAM_ADDR,IWL_TM_ATTR_SRAM_SIZE) - * are missing, or -ENOMEM if the buffer allocation fails. - * - * Otherwise 0 is replied indicating the success of the SRAM reading. - * - * @hw: ieee80211_hw object that represents the device - * @tb: gnl message fields from the user space - */ -static int iwl_testmode_indirect_mem(struct ieee80211_hw *hw, - struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - u32 addr, size, cmd; - unsigned char *buf; - - /* Both read and write should be blocked, for atomicity */ - if (priv->testmode_mem.read_in_progress) - return -EBUSY; - - cmd = nla_get_u32(tb[IWL_TM_ATTR_COMMAND]); - if (!tb[IWL_TM_ATTR_MEM_ADDR]) { - IWL_ERR(priv, "Error finding memory offset address\n"); - return -ENOMSG; - } - addr = nla_get_u32(tb[IWL_TM_ATTR_MEM_ADDR]); - if (!tb[IWL_TM_ATTR_BUFFER_SIZE]) { - IWL_ERR(priv, "Error finding size for memory reading\n"); - return -ENOMSG; - } - size = nla_get_u32(tb[IWL_TM_ATTR_BUFFER_SIZE]); - - if (cmd == IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ) - return iwl_testmode_indirect_read(priv, addr, size); - else { - if (!tb[IWL_TM_ATTR_BUFFER_DUMP]) - return -EINVAL; - buf = (unsigned char *) nla_data(tb[IWL_TM_ATTR_BUFFER_DUMP]); - return iwl_testmode_indirect_write(priv, addr, size, buf); - } -} - -static int iwl_testmode_buffer_dump(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct netlink_callback *cb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int idx, length; - - if (priv->testmode_mem.read_in_progress) { - idx = cb->args[4]; - if (idx >= priv->testmode_mem.num_chunks) { - iwl_mem_cleanup(priv); - return -ENOENT; - } - length = DUMP_CHUNK_SIZE; - if (((idx + 1) == priv->testmode_mem.num_chunks) && - (priv->testmode_mem.buff_size % DUMP_CHUNK_SIZE)) - length = priv->testmode_mem.buff_size % - DUMP_CHUNK_SIZE; - - NLA_PUT(skb, IWL_TM_ATTR_BUFFER_DUMP, length, - priv->testmode_mem.buff_addr + - (DUMP_CHUNK_SIZE * idx)); - idx++; - cb->args[4] = idx; - return 0; - } else - return -EFAULT; - - nla_put_failure: - return -ENOBUFS; -} - -static int iwl_testmode_notifications(struct ieee80211_hw *hw, - struct nlattr **tb) -{ - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - bool enable; - - enable = nla_get_flag(tb[IWL_TM_ATTR_ENABLE_NOTIFICATION]); - if (enable) - priv->pre_rx_handler = iwl_testmode_ucode_rx_pkt; - else - priv->pre_rx_handler = NULL; - return 0; -} - - -/* The testmode gnl message handler that takes the gnl message from the - * user space and parses it per the policy iwl_testmode_gnl_msg_policy, then - * invoke the corresponding handlers. - * - * This function is invoked when there is user space application sending - * gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated - * by nl80211. - * - * It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before - * dispatching it to the corresponding handler. - * - * If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application; - * -ENOSYS is replied to the user application if the command is unknown; - * Otherwise, the command is dispatched to the respective handler. - * - * @hw: ieee80211_hw object that represents the device - * @data: pointer to user space message - * @len: length in byte of @data - */ -int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len) -{ - struct nlattr *tb[IWL_TM_ATTR_MAX]; - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int result; - - result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len, - iwl_testmode_gnl_msg_policy); - if (result != 0) { - IWL_ERR(priv, "Error parsing the gnl message : %d\n", result); - return result; - } - - /* IWL_TM_ATTR_COMMAND is absolutely mandatory */ - if (!tb[IWL_TM_ATTR_COMMAND]) { - IWL_ERR(priv, "Missing testmode command type\n"); - return -ENOMSG; - } - /* in case multiple accesses to the device happens */ - mutex_lock(&priv->mutex); - - switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) { - case IWL_TM_CMD_APP2DEV_UCODE: - IWL_DEBUG_INFO(priv, "testmode cmd to uCode\n"); - result = iwl_testmode_ucode(hw, tb); - break; - case IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32: - case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32: - case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8: - IWL_DEBUG_INFO(priv, "testmode cmd to register\n"); - result = iwl_testmode_reg(hw, tb); - break; - case IWL_TM_CMD_APP2DEV_GET_DEVICENAME: - case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW: - case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB: - case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW: - case IWL_TM_CMD_APP2DEV_GET_EEPROM: - case IWL_TM_CMD_APP2DEV_FIXRATE_REQ: - case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: - case IWL_TM_CMD_APP2DEV_GET_FW_VERSION: - case IWL_TM_CMD_APP2DEV_GET_DEVICE_ID: - case IWL_TM_CMD_APP2DEV_GET_FW_INFO: - IWL_DEBUG_INFO(priv, "testmode cmd to driver\n"); - result = iwl_testmode_driver(hw, tb); - break; - - case IWL_TM_CMD_APP2DEV_BEGIN_TRACE: - case IWL_TM_CMD_APP2DEV_END_TRACE: - case IWL_TM_CMD_APP2DEV_READ_TRACE: - IWL_DEBUG_INFO(priv, "testmode uCode trace cmd to driver\n"); - result = iwl_testmode_trace(hw, tb); - break; - - case IWL_TM_CMD_APP2DEV_OWNERSHIP: - IWL_DEBUG_INFO(priv, "testmode change uCode ownership\n"); - result = iwl_testmode_ownership(hw, tb); - break; - - case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ: - case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE: - IWL_DEBUG_INFO(priv, "testmode indirect memory cmd " - "to driver\n"); - result = iwl_testmode_indirect_mem(hw, tb); - break; - - case IWL_TM_CMD_APP2DEV_NOTIFICATIONS: - IWL_DEBUG_INFO(priv, "testmode notifications cmd " - "to driver\n"); - result = iwl_testmode_notifications(hw, tb); - break; - - default: - IWL_ERR(priv, "Unknown testmode command\n"); - result = -ENOSYS; - break; - } - - mutex_unlock(&priv->mutex); - return result; -} - -int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb, - struct netlink_callback *cb, - void *data, int len) -{ - struct nlattr *tb[IWL_TM_ATTR_MAX]; - struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - int result; - u32 cmd; - - if (cb->args[3]) { - /* offset by 1 since commands start at 0 */ - cmd = cb->args[3] - 1; - } else { - result = nla_parse(tb, IWL_TM_ATTR_MAX - 1, data, len, - iwl_testmode_gnl_msg_policy); - if (result) { - IWL_ERR(priv, - "Error parsing the gnl message : %d\n", result); - return result; - } - - /* IWL_TM_ATTR_COMMAND is absolutely mandatory */ - if (!tb[IWL_TM_ATTR_COMMAND]) { - IWL_ERR(priv, "Missing testmode command type\n"); - return -ENOMSG; - } - cmd = nla_get_u32(tb[IWL_TM_ATTR_COMMAND]); - cb->args[3] = cmd + 1; - } - - /* in case multiple accesses to the device happens */ - mutex_lock(&priv->mutex); - switch (cmd) { - case IWL_TM_CMD_APP2DEV_READ_TRACE: - IWL_DEBUG_INFO(priv, "uCode trace cmd to driver\n"); - result = iwl_testmode_trace_dump(hw, skb, cb); - break; - case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP: - IWL_DEBUG_INFO(priv, "testmode sram dump cmd to driver\n"); - result = iwl_testmode_buffer_dump(hw, skb, cb); - break; - default: - result = -EINVAL; - break; - } - - mutex_unlock(&priv->mutex); - return result; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-testmode.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-testmode.h deleted file mode 100644 index 6ba211b0..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-testmode.h +++ /dev/null @@ -1,309 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __IWL_TESTMODE_H__ -#define __IWL_TESTMODE_H__ - -#include <linux/types.h> - - -/* - * Commands from user space to kernel space(IWL_TM_CMD_ID_APP2DEV_XX) and - * from and kernel space to user space(IWL_TM_CMD_ID_DEV2APP_XX). - * The command ID is carried with IWL_TM_ATTR_COMMAND. - * - * @IWL_TM_CMD_APP2DEV_UCODE: - * commands from user application to the uCode, - * the actual uCode host command ID is carried with - * IWL_TM_ATTR_UCODE_CMD_ID - * - * @IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32: - * @IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32: - * @IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8: - * commands from user applicaiton to access register - * - * @IWL_TM_CMD_APP2DEV_GET_DEVICENAME: retrieve device name - * @IWL_TM_CMD_APP2DEV_LOAD_INIT_FW: load initial uCode image - * @IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB: perform calibration - * @IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW: load runtime uCode image - * @IWL_TM_CMD_APP2DEV_GET_EEPROM: request EEPROM data - * @IWL_TM_CMD_APP2DEV_FIXRATE_REQ: set fix MCS - * commands fom user space for pure driver level operations - * - * @IWL_TM_CMD_APP2DEV_BEGIN_TRACE: - * @IWL_TM_CMD_APP2DEV_END_TRACE: - * @IWL_TM_CMD_APP2DEV_READ_TRACE: - * commands fom user space for uCode trace operations - * - * @IWL_TM_CMD_DEV2APP_SYNC_RSP: - * commands from kernel space to carry the synchronous response - * to user application - * @IWL_TM_CMD_DEV2APP_UCODE_RX_PKT: - * commands from kernel space to multicast the spontaneous messages - * to user application, or reply of host commands - * @IWL_TM_CMD_DEV2APP_EEPROM_RSP: - * commands from kernel space to carry the eeprom response - * to user application - * - * @IWL_TM_CMD_APP2DEV_OWNERSHIP: - * commands from user application to own change the ownership of the uCode - * if application has the ownership, the only host command from - * testmode will deliver to uCode. Default owner is driver - * - * @IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: load Wake On Wireless LAN uCode image - * @IWL_TM_CMD_APP2DEV_GET_FW_VERSION: retrieve uCode version - * @IWL_TM_CMD_APP2DEV_GET_DEVICE_ID: retrieve ID information in device - * @IWL_TM_CMD_APP2DEV_GET_FW_INFO: - * retrieve information of existing loaded uCode image - * - * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ: - * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP: - * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE: - * Commands to read/write data from periphery or SRAM memory ranges. - * Fore reading, a READ command is sent from the userspace and the data - * is returned when the user calls a DUMP command. - * For writing, only a WRITE command is used. - * @IWL_TM_CMD_APP2DEV_NOTIFICATIONS: - * Command to enable/disable notifications (currently RX packets) from the - * driver to userspace. - */ -enum iwl_tm_cmd_t { - IWL_TM_CMD_APP2DEV_UCODE = 1, - IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32 = 2, - IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32 = 3, - IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8 = 4, - IWL_TM_CMD_APP2DEV_GET_DEVICENAME = 5, - IWL_TM_CMD_APP2DEV_LOAD_INIT_FW = 6, - IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB = 7, - IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW = 8, - IWL_TM_CMD_APP2DEV_GET_EEPROM = 9, - IWL_TM_CMD_APP2DEV_FIXRATE_REQ = 10, - IWL_TM_CMD_APP2DEV_BEGIN_TRACE = 11, - IWL_TM_CMD_APP2DEV_END_TRACE = 12, - IWL_TM_CMD_APP2DEV_READ_TRACE = 13, - IWL_TM_CMD_DEV2APP_SYNC_RSP = 14, - IWL_TM_CMD_DEV2APP_UCODE_RX_PKT = 15, - IWL_TM_CMD_DEV2APP_EEPROM_RSP = 16, - IWL_TM_CMD_APP2DEV_OWNERSHIP = 17, - RESERVED_18 = 18, - RESERVED_19 = 19, - RESERVED_20 = 20, - RESERVED_21 = 21, - IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW = 22, - IWL_TM_CMD_APP2DEV_GET_FW_VERSION = 23, - IWL_TM_CMD_APP2DEV_GET_DEVICE_ID = 24, - IWL_TM_CMD_APP2DEV_GET_FW_INFO = 25, - IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ = 26, - IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP = 27, - IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE = 28, - IWL_TM_CMD_APP2DEV_NOTIFICATIONS = 29, - IWL_TM_CMD_MAX = 30, -}; - -/* - * Atrribute filed in testmode command - * See enum iwl_tm_cmd_t. - * - * @IWL_TM_ATTR_NOT_APPLICABLE: - * The attribute is not applicable or invalid - * @IWL_TM_ATTR_COMMAND: - * From user space to kernel space: - * the command either destines to ucode, driver, or register; - * From kernel space to user space: - * the command either carries synchronous response, - * or the spontaneous message multicast from the device; - * - * @IWL_TM_ATTR_UCODE_CMD_ID: - * @IWL_TM_ATTR_UCODE_CMD_DATA: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE, - * The mandatory fields are : - * IWL_TM_ATTR_UCODE_CMD_ID for recognizable command ID; - * IWL_TM_ATTR_UCODE_CMD_DATA for the actual command payload - * to the ucode - * - * @IWL_TM_ATTR_REG_OFFSET: - * @IWL_TM_ATTR_REG_VALUE8: - * @IWL_TM_ATTR_REG_VALUE32: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_XXX, - * The mandatory fields are: - * IWL_TM_ATTR_REG_OFFSET for the offset of the target register; - * IWL_TM_ATTR_REG_VALUE8 or IWL_TM_ATTR_REG_VALUE32 for value - * - * @IWL_TM_ATTR_SYNC_RSP: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_SYNC_RSP, - * The mandatory fields are: - * IWL_TM_ATTR_SYNC_RSP for the data content responding to the user - * application command - * - * @IWL_TM_ATTR_UCODE_RX_PKT: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_UCODE_RX_PKT, - * The mandatory fields are: - * IWL_TM_ATTR_UCODE_RX_PKT for the data content multicast to the user - * application - * - * @IWL_TM_ATTR_EEPROM: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_EEPROM, - * The mandatory fields are: - * IWL_TM_ATTR_EEPROM for the data content responging to the user - * application - * - * @IWL_TM_ATTR_TRACE_ADDR: - * @IWL_TM_ATTR_TRACE_SIZE: - * @IWL_TM_ATTR_TRACE_DUMP: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_XXX_TRACE, - * The mandatory fields are: - * IWL_TM_ATTR_MEM_TRACE_ADDR for the trace address - * IWL_TM_ATTR_MEM_TRACE_SIZE for the trace buffer size - * IWL_TM_ATTR_MEM_TRACE_DUMP for the trace dump - * - * @IWL_TM_ATTR_FIXRATE: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_FIXRATE_REQ, - * The mandatory fields are: - * IWL_TM_ATTR_FIXRATE for the fixed rate - * - * @IWL_TM_ATTR_UCODE_OWNER: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_OWNERSHIP, - * The mandatory fields are: - * IWL_TM_ATTR_UCODE_OWNER for the new owner - * - * @IWL_TM_ATTR_MEM_ADDR: - * @IWL_TM_ATTR_BUFFER_SIZE: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ - * or IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE. - * The mandatory fields are: - * IWL_TM_ATTR_MEM_ADDR for the address in SRAM/periphery to read/write - * IWL_TM_ATTR_BUFFER_SIZE for the buffer size of data to read/write. - * - * @IWL_TM_ATTR_BUFFER_DUMP: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP, - * IWL_TM_ATTR_BUFFER_DUMP is used for the data that was read. - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE, - * this attribute contains the data to write. - * - * @IWL_TM_ATTR_FW_VERSION: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_FW_VERSION, - * IWL_TM_ATTR_FW_VERSION for the uCode version - * - * @IWL_TM_ATTR_DEVICE_ID: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_DEVICE_ID, - * IWL_TM_ATTR_DEVICE_ID for the device ID information - * - * @IWL_TM_ATTR_FW_TYPE: - * @IWL_TM_ATTR_FW_INST_SIZE: - * @IWL_TM_ATTR_FW_DATA_SIZE: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_FW_INFO, - * The mandatory fields are: - * IWL_TM_ATTR_FW_TYPE for the uCode type (INIT/RUNTIME/...) - * IWL_TM_ATTR_FW_INST_SIZE for the size of instruction section - * IWL_TM_ATTR_FW_DATA_SIZE for the size of data section - * - * @IWL_TM_ATTR_UCODE_CMD_SKB: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE this flag - * indicates that the user wants to receive the response of the command - * in a reply SKB. If it's not present, the response is not returned. - * @IWL_TM_ATTR_ENABLE_NOTIFICATIONS: - * When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_NOTIFICATIONS, this - * flag enables (if present) or disables (if not) the forwarding - * to userspace. - */ -enum iwl_tm_attr_t { - IWL_TM_ATTR_NOT_APPLICABLE = 0, - IWL_TM_ATTR_COMMAND = 1, - IWL_TM_ATTR_UCODE_CMD_ID = 2, - IWL_TM_ATTR_UCODE_CMD_DATA = 3, - IWL_TM_ATTR_REG_OFFSET = 4, - IWL_TM_ATTR_REG_VALUE8 = 5, - IWL_TM_ATTR_REG_VALUE32 = 6, - IWL_TM_ATTR_SYNC_RSP = 7, - IWL_TM_ATTR_UCODE_RX_PKT = 8, - IWL_TM_ATTR_EEPROM = 9, - IWL_TM_ATTR_TRACE_ADDR = 10, - IWL_TM_ATTR_TRACE_SIZE = 11, - IWL_TM_ATTR_TRACE_DUMP = 12, - IWL_TM_ATTR_FIXRATE = 13, - IWL_TM_ATTR_UCODE_OWNER = 14, - IWL_TM_ATTR_MEM_ADDR = 15, - IWL_TM_ATTR_BUFFER_SIZE = 16, - IWL_TM_ATTR_BUFFER_DUMP = 17, - IWL_TM_ATTR_FW_VERSION = 18, - IWL_TM_ATTR_DEVICE_ID = 19, - IWL_TM_ATTR_FW_TYPE = 20, - IWL_TM_ATTR_FW_INST_SIZE = 21, - IWL_TM_ATTR_FW_DATA_SIZE = 22, - IWL_TM_ATTR_UCODE_CMD_SKB = 23, - IWL_TM_ATTR_ENABLE_NOTIFICATION = 24, - IWL_TM_ATTR_MAX = 25, -}; - -/* uCode trace buffer */ -#define TRACE_BUFF_SIZE_MAX 0x200000 -#define TRACE_BUFF_SIZE_MIN 0x20000 -#define TRACE_BUFF_SIZE_DEF TRACE_BUFF_SIZE_MIN -#define TRACE_BUFF_PADD 0x2000 - -/* Maximum data size of each dump it packet */ -#define DUMP_CHUNK_SIZE (PAGE_SIZE - 1024) - -/* Address offset of data segment in SRAM */ -#define SRAM_DATA_SEG_OFFSET 0x800000 - -#endif diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h deleted file mode 100644 index 3b844b79..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-int.h +++ /dev/null @@ -1,505 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#ifndef __iwl_trans_int_pcie_h__ -#define __iwl_trans_int_pcie_h__ - -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/skbuff.h> -#include <linux/wait.h> -#include <linux/pci.h> - -#include "iwl-fh.h" -#include "iwl-csr.h" -#include "iwl-shared.h" -#include "iwl-trans.h" -#include "iwl-debug.h" -#include "iwl-io.h" -#include "iwl-op-mode.h" - -struct iwl_tx_queue; -struct iwl_queue; -struct iwl_host_cmd; - -/*This file includes the declaration that are internal to the - * trans_pcie layer */ - -struct iwl_rx_mem_buffer { - dma_addr_t page_dma; - struct page *page; - struct list_head list; -}; - -/** - * struct isr_statistics - interrupt statistics - * - */ -struct isr_statistics { - u32 hw; - u32 sw; - u32 err_code; - u32 sch; - u32 alive; - u32 rfkill; - u32 ctkill; - u32 wakeup; - u32 rx; - u32 tx; - u32 unhandled; -}; - -/** - * struct iwl_rx_queue - Rx queue - * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) - * @bd_dma: bus address of buffer of receive buffer descriptors (rbd) - * @pool: - * @queue: - * @read: Shared index to newest available Rx buffer - * @write: Shared index to oldest written Rx packet - * @free_count: Number of pre-allocated buffers in rx_free - * @write_actual: - * @rx_free: list of free SKBs for use - * @rx_used: List of Rx buffers with no SKB - * @need_update: flag to indicate we need to update read/write index - * @rb_stts: driver's pointer to receive buffer status - * @rb_stts_dma: bus address of receive buffer status - * @lock: - * - * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers - */ -struct iwl_rx_queue { - __le32 *bd; - dma_addr_t bd_dma; - struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; - struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE]; - u32 read; - u32 write; - u32 free_count; - u32 write_actual; - struct list_head rx_free; - struct list_head rx_used; - int need_update; - struct iwl_rb_status *rb_stts; - dma_addr_t rb_stts_dma; - spinlock_t lock; -}; - -struct iwl_dma_ptr { - dma_addr_t dma; - void *addr; - size_t size; -}; - -/** - * iwl_queue_inc_wrap - increment queue index, wrap back to beginning - * @index -- current index - * @n_bd -- total number of entries in queue (must be power of 2) - */ -static inline int iwl_queue_inc_wrap(int index, int n_bd) -{ - return ++index & (n_bd - 1); -} - -/** - * iwl_queue_dec_wrap - decrement queue index, wrap back to end - * @index -- current index - * @n_bd -- total number of entries in queue (must be power of 2) - */ -static inline int iwl_queue_dec_wrap(int index, int n_bd) -{ - return --index & (n_bd - 1); -} - -/* - * This queue number is required for proper operation - * because the ucode will stop/start the scheduler as - * required. - */ -#define IWL_IPAN_MCAST_QUEUE 8 - -struct iwl_cmd_meta { - /* only for SYNC commands, iff the reply skb is wanted */ - struct iwl_host_cmd *source; - - u32 flags; - - DEFINE_DMA_UNMAP_ADDR(mapping); - DEFINE_DMA_UNMAP_LEN(len); -}; - -/* - * Generic queue structure - * - * Contains common data for Rx and Tx queues. - * - * Note the difference between n_bd and n_window: the hardware - * always assumes 256 descriptors, so n_bd is always 256 (unless - * there might be HW changes in the future). For the normal TX - * queues, n_window, which is the size of the software queue data - * is also 256; however, for the command queue, n_window is only - * 32 since we don't need so many commands pending. Since the HW - * still uses 256 BDs for DMA though, n_bd stays 256. As a result, - * the software buffers (in the variables @meta, @txb in struct - * iwl_tx_queue) only have 32 entries, while the HW buffers (@tfds - * in the same struct) have 256. - * This means that we end up with the following: - * HW entries: | 0 | ... | N * 32 | ... | N * 32 + 31 | ... | 255 | - * SW entries: | 0 | ... | 31 | - * where N is a number between 0 and 7. This means that the SW - * data is a window overlayed over the HW queue. - */ -struct iwl_queue { - int n_bd; /* number of BDs in this queue */ - int write_ptr; /* 1-st empty entry (index) host_w*/ - int read_ptr; /* last used entry (index) host_r*/ - /* use for monitoring and recovering the stuck queue */ - dma_addr_t dma_addr; /* physical addr for BD's */ - int n_window; /* safe queue window */ - u32 id; - int low_mark; /* low watermark, resume queue if free - * space more than this */ - int high_mark; /* high watermark, stop queue if free - * space less than this */ -}; - -/** - * struct iwl_tx_queue - Tx Queue for DMA - * @q: generic Rx/Tx queue descriptor - * @bd: base of circular buffer of TFDs - * @cmd: array of command/TX buffer pointers - * @meta: array of meta data for each command/tx buffer - * @dma_addr_cmd: physical address of cmd/tx buffer array - * @txb: array of per-TFD driver data - * lock: queue lock - * @time_stamp: time (in jiffies) of last read_ptr change - * @need_update: indicates need to update read/write index - * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled - * @sta_id: valid if sched_retry is set - * @tid: valid if sched_retry is set - * - * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame - * descriptors) and required locking structures. - */ -#define TFD_TX_CMD_SLOTS 256 -#define TFD_CMD_SLOTS 32 - -struct iwl_tx_queue { - struct iwl_queue q; - struct iwl_tfd *tfds; - struct iwl_device_cmd **cmd; - struct iwl_cmd_meta *meta; - struct sk_buff **skbs; - spinlock_t lock; - unsigned long time_stamp; - u8 need_update; - u8 sched_retry; - u8 active; - u8 swq_id; - - u16 sta_id; - u16 tid; -}; - -/** - * struct iwl_trans_pcie - PCIe transport specific data - * @rxq: all the RX queue data - * @rx_replenish: work that will be called when buffers need to be allocated - * @trans: pointer to the generic transport area - * @irq - the irq number for the device - * @irq_requested: true when the irq has been requested - * @scd_base_addr: scheduler sram base address in SRAM - * @scd_bc_tbls: pointer to the byte count table of the scheduler - * @kw: keep warm address - * @ac_to_fifo: to what fifo is a specifc AC mapped ? - * @ac_to_queue: to what tx queue is a specifc AC mapped ? - * @mcast_queue: - * @txq: Tx DMA processing queues - * @txq_ctx_active_msk: what queue is active - * queue_stopped: tracks what queue is stopped - * queue_stop_count: tracks what SW queue is stopped - * @pci_dev: basic pci-network driver stuff - * @hw_base: pci hardware address support - * @ucode_write_complete: indicates that the ucode has been copied. - * @ucode_write_waitq: wait queue for uCode load - * @status - transport specific status flags - * @cmd_queue - command queue number - */ -struct iwl_trans_pcie { - struct iwl_rx_queue rxq; - struct work_struct rx_replenish; - struct iwl_trans *trans; - - /* INT ICT Table */ - __le32 *ict_tbl; - dma_addr_t ict_tbl_dma; - int ict_index; - u32 inta; - bool use_ict; - bool irq_requested; - struct tasklet_struct irq_tasklet; - struct isr_statistics isr_stats; - - unsigned int irq; - spinlock_t irq_lock; - u32 inta_mask; - u32 scd_base_addr; - struct iwl_dma_ptr scd_bc_tbls; - struct iwl_dma_ptr kw; - - const u8 *ac_to_fifo[NUM_IWL_RXON_CTX]; - const u8 *ac_to_queue[NUM_IWL_RXON_CTX]; - u8 mcast_queue[NUM_IWL_RXON_CTX]; - u8 agg_txq[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT]; - - struct iwl_tx_queue *txq; - unsigned long txq_ctx_active_msk; -#define IWL_MAX_HW_QUEUES 32 - unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)]; - atomic_t queue_stop_count[4]; - - /* PCI bus related data */ - struct pci_dev *pci_dev; - void __iomem *hw_base; - - bool ucode_write_complete; - wait_queue_head_t ucode_write_waitq; - unsigned long status; - u8 cmd_queue; - u8 n_no_reclaim_cmds; - u8 no_reclaim_cmds[MAX_NO_RECLAIM_CMDS]; -}; - -#define IWL_TRANS_GET_PCIE_TRANS(_iwl_trans) \ - ((struct iwl_trans_pcie *) ((_iwl_trans)->trans_specific)) - -/***************************************************** -* RX -******************************************************/ -void iwl_bg_rx_replenish(struct work_struct *data); -void iwl_irq_tasklet(struct iwl_trans *trans); -void iwlagn_rx_replenish(struct iwl_trans *trans); -void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans, - struct iwl_rx_queue *q); - -/***************************************************** -* ICT -******************************************************/ -void iwl_reset_ict(struct iwl_trans *trans); -void iwl_disable_ict(struct iwl_trans *trans); -int iwl_alloc_isr_ict(struct iwl_trans *trans); -void iwl_free_isr_ict(struct iwl_trans *trans); -irqreturn_t iwl_isr_ict(int irq, void *data); - -/***************************************************** -* TX / HCMD -******************************************************/ -void iwl_txq_update_write_ptr(struct iwl_trans *trans, - struct iwl_tx_queue *txq); -int iwlagn_txq_attach_buf_to_tfd(struct iwl_trans *trans, - struct iwl_tx_queue *txq, - dma_addr_t addr, u16 len, u8 reset); -int iwl_queue_init(struct iwl_queue *q, int count, int slots_num, u32 id); -int iwl_trans_pcie_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd); -void iwl_tx_cmd_complete(struct iwl_trans *trans, - struct iwl_rx_cmd_buffer *rxb, int handler_status); -void iwl_trans_txq_update_byte_cnt_tbl(struct iwl_trans *trans, - struct iwl_tx_queue *txq, - u16 byte_cnt); -int iwl_trans_pcie_tx_agg_disable(struct iwl_trans *trans, - int sta_id, int tid); -void iwl_trans_set_wr_ptrs(struct iwl_trans *trans, int txq_id, u32 index); -void iwl_trans_tx_queue_set_status(struct iwl_trans *trans, - struct iwl_tx_queue *txq, - int tx_fifo_id, int scd_retry); -int iwl_trans_pcie_tx_agg_alloc(struct iwl_trans *trans, int sta_id, int tid); -void iwl_trans_pcie_tx_agg_setup(struct iwl_trans *trans, - enum iwl_rxon_context_id ctx, - int sta_id, int tid, int frame_limit, u16 ssn); -void iwlagn_txq_free_tfd(struct iwl_trans *trans, struct iwl_tx_queue *txq, - enum dma_data_direction dma_dir); -int iwl_tx_queue_reclaim(struct iwl_trans *trans, int txq_id, int index, - struct sk_buff_head *skbs); -int iwl_queue_space(const struct iwl_queue *q); - -/***************************************************** -* Error handling -******************************************************/ -int iwl_dump_nic_event_log(struct iwl_trans *trans, bool full_log, - char **buf, bool display); -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display); -void iwl_dump_csr(struct iwl_trans *trans); - -/***************************************************** -* Helpers -******************************************************/ -static inline void iwl_disable_interrupts(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - clear_bit(STATUS_INT_ENABLED, &trans_pcie->status); - - /* disable interrupts from uCode/NIC to host */ - iwl_write32(trans, CSR_INT_MASK, 0x00000000); - - /* acknowledge/clear/reset any interrupts still pending - * from uCode or flow handler (Rx/Tx DMA) */ - iwl_write32(trans, CSR_INT, 0xffffffff); - iwl_write32(trans, CSR_FH_INT_STATUS, 0xffffffff); - IWL_DEBUG_ISR(trans, "Disabled interrupts\n"); -} - -static inline void iwl_enable_interrupts(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - IWL_DEBUG_ISR(trans, "Enabling interrupts\n"); - set_bit(STATUS_INT_ENABLED, &trans_pcie->status); - iwl_write32(trans, CSR_INT_MASK, trans_pcie->inta_mask); -} - -static inline void iwl_enable_rfkill_int(struct iwl_trans *trans) -{ - IWL_DEBUG_ISR(trans, "Enabling rfkill interrupt\n"); - iwl_write32(trans, CSR_INT_MASK, CSR_INT_BIT_RF_KILL); -} - -/* - * we have 8 bits used like this: - * - * 7 6 5 4 3 2 1 0 - * | | | | | | | | - * | | | | | | +-+-------- AC queue (0-3) - * | | | | | | - * | +-+-+-+-+------------ HW queue ID - * | - * +---------------------- unused - */ -static inline void iwl_set_swq_id(struct iwl_tx_queue *txq, u8 ac, u8 hwq) -{ - BUG_ON(ac > 3); /* only have 2 bits */ - BUG_ON(hwq > 31); /* only use 5 bits */ - - txq->swq_id = (hwq << 2) | ac; -} - -static inline u8 iwl_get_queue_ac(struct iwl_tx_queue *txq) -{ - return txq->swq_id & 0x3; -} - -static inline void iwl_wake_queue(struct iwl_trans *trans, - struct iwl_tx_queue *txq) -{ - u8 queue = txq->swq_id; - u8 ac = queue & 3; - u8 hwq = (queue >> 2) & 0x1f; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - if (test_and_clear_bit(hwq, trans_pcie->queue_stopped)) { - if (atomic_dec_return(&trans_pcie->queue_stop_count[ac]) <= 0) { - iwl_op_mode_queue_not_full(trans->op_mode, ac); - IWL_DEBUG_TX_QUEUES(trans, "Wake hwq %d ac %d", - hwq, ac); - } else { - IWL_DEBUG_TX_QUEUES(trans, - "Don't wake hwq %d ac %d stop count %d", - hwq, ac, - atomic_read(&trans_pcie->queue_stop_count[ac])); - } - } -} - -static inline void iwl_stop_queue(struct iwl_trans *trans, - struct iwl_tx_queue *txq) -{ - u8 queue = txq->swq_id; - u8 ac = queue & 3; - u8 hwq = (queue >> 2) & 0x1f; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - if (!test_and_set_bit(hwq, trans_pcie->queue_stopped)) { - if (atomic_inc_return(&trans_pcie->queue_stop_count[ac]) > 0) { - iwl_op_mode_queue_full(trans->op_mode, ac); - IWL_DEBUG_TX_QUEUES(trans, - "Stop hwq %d ac %d stop count %d", - hwq, ac, - atomic_read(&trans_pcie->queue_stop_count[ac])); - } else { - IWL_DEBUG_TX_QUEUES(trans, - "Don't stop hwq %d ac %d stop count %d", - hwq, ac, - atomic_read(&trans_pcie->queue_stop_count[ac])); - } - } else { - IWL_DEBUG_TX_QUEUES(trans, "stop hwq %d, but it is stopped", - hwq); - } -} - -static inline void iwl_txq_ctx_activate(struct iwl_trans_pcie *trans_pcie, - int txq_id) -{ - set_bit(txq_id, &trans_pcie->txq_ctx_active_msk); -} - -static inline void iwl_txq_ctx_deactivate(struct iwl_trans_pcie *trans_pcie, - int txq_id) -{ - clear_bit(txq_id, &trans_pcie->txq_ctx_active_msk); -} - -static inline int iwl_queue_used(const struct iwl_queue *q, int i) -{ - return q->write_ptr >= q->read_ptr ? - (i >= q->read_ptr && i < q->write_ptr) : - !(i < q->read_ptr && i >= q->write_ptr); -} - -static inline u8 get_cmd_index(struct iwl_queue *q, u32 index) -{ - return index & (q->n_window - 1); -} - -#define IWL_TX_FIFO_BK 0 /* shared */ -#define IWL_TX_FIFO_BE 1 -#define IWL_TX_FIFO_VI 2 /* shared */ -#define IWL_TX_FIFO_VO 3 -#define IWL_TX_FIFO_BK_IPAN IWL_TX_FIFO_BK -#define IWL_TX_FIFO_BE_IPAN 4 -#define IWL_TX_FIFO_VI_IPAN IWL_TX_FIFO_VI -#define IWL_TX_FIFO_VO_IPAN 5 -/* re-uses the VO FIFO, uCode will properly flush/schedule */ -#define IWL_TX_FIFO_AUX 5 -#define IWL_TX_FIFO_UNUSED -1 - -/* AUX (TX during scan dwell) queue */ -#define IWL_AUX_QUEUE 10 - -#endif /* __iwl_trans_int_pcie_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c deleted file mode 100644 index aa7aea16..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +++ /dev/null @@ -1,1433 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/sched.h> -#include <linux/wait.h> -#include <linux/gfp.h> - -#include "iwl-prph.h" -#include "iwl-io.h" -#include "iwl-trans-pcie-int.h" -#include "iwl-op-mode.h" - -#ifdef CONFIG_IWLWIFI_IDI -#include "iwl-amfh.h" -#endif - -/****************************************************************************** - * - * RX path functions - * - ******************************************************************************/ - -/* - * Rx theory of operation - * - * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs), - * each of which point to Receive Buffers to be filled by the NIC. These get - * used not only for Rx frames, but for any command response or notification - * from the NIC. The driver and NIC manage the Rx buffers by means - * of indexes into the circular buffer. - * - * Rx Queue Indexes - * The host/firmware share two index registers for managing the Rx buffers. - * - * The READ index maps to the first position that the firmware may be writing - * to -- the driver can read up to (but not including) this position and get - * good data. - * The READ index is managed by the firmware once the card is enabled. - * - * The WRITE index maps to the last position the driver has read from -- the - * position preceding WRITE is the last slot the firmware can place a packet. - * - * The queue is empty (no good data) if WRITE = READ - 1, and is full if - * WRITE = READ. - * - * During initialization, the host sets up the READ queue position to the first - * INDEX position, and WRITE to the last (READ - 1 wrapped) - * - * When the firmware places a packet in a buffer, it will advance the READ index - * and fire the RX interrupt. The driver can then query the READ index and - * process as many packets as possible, moving the WRITE index forward as it - * resets the Rx queue buffers with new memory. - * - * The management in the driver is as follows: - * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When - * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled - * to replenish the iwl->rxq->rx_free. - * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the - * iwl->rxq is replenished and the READ INDEX is updated (updating the - * 'processed' and 'read' driver indexes as well) - * + A received packet is processed and handed to the kernel network stack, - * detached from the iwl->rxq. The driver 'processed' index is updated. - * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free - * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ - * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there - * were enough free buffers and RX_STALLED is set it is cleared. - * - * - * Driver sequence: - * - * iwl_rx_queue_alloc() Allocates rx_free - * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls - * iwl_rx_queue_restock - * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx - * queue, updates firmware pointers, and updates - * the WRITE index. If insufficient rx_free buffers - * are available, schedules iwl_rx_replenish - * - * -- enable interrupts -- - * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the - * READ INDEX, detaching the SKB from the pool. - * Moves the packet buffer from queue to rx_used. - * Calls iwl_rx_queue_restock to refill any empty - * slots. - * ... - * - */ - -/** - * iwl_rx_queue_space - Return number of free slots available in queue. - */ -static int iwl_rx_queue_space(const struct iwl_rx_queue *q) -{ - int s = q->read - q->write; - if (s <= 0) - s += RX_QUEUE_SIZE; - /* keep some buffer to not confuse full and empty queue */ - s -= 2; - if (s < 0) - s = 0; - return s; -} - -/** - * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue - */ -void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans, - struct iwl_rx_queue *q) -{ - unsigned long flags; - u32 reg; - - spin_lock_irqsave(&q->lock, flags); - - if (q->need_update == 0) - goto exit_unlock; - - if (cfg(trans)->base_params->shadow_reg_enable) { - /* shadow register enabled */ - /* Device expects a multiple of 8 */ - q->write_actual = (q->write & ~0x7); - iwl_write32(trans, FH_RSCSR_CHNL0_WPTR, q->write_actual); - } else { - /* If power-saving is in use, make sure device is awake */ - if (test_bit(STATUS_POWER_PMI, &trans->shrd->status)) { - reg = iwl_read32(trans, CSR_UCODE_DRV_GP1); - - if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - IWL_DEBUG_INFO(trans, - "Rx queue requesting wakeup," - " GP1 = 0x%x\n", reg); - iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - goto exit_unlock; - } - - q->write_actual = (q->write & ~0x7); - iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR, - q->write_actual); - - /* Else device is assumed to be awake */ - } else { - /* Device expects a multiple of 8 */ - q->write_actual = (q->write & ~0x7); - iwl_write_direct32(trans, FH_RSCSR_CHNL0_WPTR, - q->write_actual); - } - } - q->need_update = 0; - - exit_unlock: - spin_unlock_irqrestore(&q->lock, flags); -} - -/** - * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr - */ -static inline __le32 iwlagn_dma_addr2rbd_ptr(dma_addr_t dma_addr) -{ - return cpu_to_le32((u32)(dma_addr >> 8)); -} - -/** - * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool - * - * If there are slots in the RX queue that need to be restocked, - * and we have free pre-allocated buffers, fill the ranks as much - * as we can, pulling from rx_free. - * - * This moves the 'write' index forward to catch up with 'processed', and - * also updates the memory address in the firmware to reference the new - * target buffer. - */ -static void iwlagn_rx_queue_restock(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - unsigned long flags; - - spin_lock_irqsave(&rxq->lock, flags); - while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) { - /* The overwritten rxb must be a used one */ - rxb = rxq->queue[rxq->write]; - BUG_ON(rxb && rxb->page); - - /* Get next free Rx buffer, remove from free list */ - element = rxq->rx_free.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - /* Point to Rx buffer via next RBD in circular buffer */ - rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(rxb->page_dma); - rxq->queue[rxq->write] = rxb; - rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; - rxq->free_count--; - } - spin_unlock_irqrestore(&rxq->lock, flags); - /* If the pre-allocated buffer pool is dropping low, schedule to - * refill it */ - if (rxq->free_count <= RX_LOW_WATERMARK) - schedule_work(&trans_pcie->rx_replenish); - - - /* If we've added more space for the firmware to place data, tell it. - * Increment device's write pointer in multiples of 8. */ - if (rxq->write_actual != (rxq->write & ~0x7)) { - spin_lock_irqsave(&rxq->lock, flags); - rxq->need_update = 1; - spin_unlock_irqrestore(&rxq->lock, flags); - iwl_rx_queue_update_write_ptr(trans, rxq); - } -} - -/** - * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free - * - * When moving to rx_free an SKB is allocated for the slot. - * - * Also restock the Rx queue via iwl_rx_queue_restock. - * This is called as a scheduled work item (except for during initialization) - */ -static void iwlagn_rx_allocate(struct iwl_trans *trans, gfp_t priority) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct list_head *element; - struct iwl_rx_mem_buffer *rxb; - struct page *page; - unsigned long flags; - gfp_t gfp_mask = priority; - - while (1) { - spin_lock_irqsave(&rxq->lock, flags); - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - return; - } - spin_unlock_irqrestore(&rxq->lock, flags); - - if (rxq->free_count > RX_LOW_WATERMARK) - gfp_mask |= __GFP_NOWARN; - - if (hw_params(trans).rx_page_order > 0) - gfp_mask |= __GFP_COMP; - - /* Alloc a new receive buffer */ - page = alloc_pages(gfp_mask, - hw_params(trans).rx_page_order); - if (!page) { - if (net_ratelimit()) - IWL_DEBUG_INFO(trans, "alloc_pages failed, " - "order: %d\n", - hw_params(trans).rx_page_order); - - if ((rxq->free_count <= RX_LOW_WATERMARK) && - net_ratelimit()) - IWL_CRIT(trans, "Failed to alloc_pages with %s." - "Only %u free buffers remaining.\n", - priority == GFP_ATOMIC ? - "GFP_ATOMIC" : "GFP_KERNEL", - rxq->free_count); - /* We don't reschedule replenish work here -- we will - * call the restock method and if it still needs - * more buffers it will schedule replenish */ - return; - } - - spin_lock_irqsave(&rxq->lock, flags); - - if (list_empty(&rxq->rx_used)) { - spin_unlock_irqrestore(&rxq->lock, flags); - __free_pages(page, hw_params(trans).rx_page_order); - return; - } - element = rxq->rx_used.next; - rxb = list_entry(element, struct iwl_rx_mem_buffer, list); - list_del(element); - - spin_unlock_irqrestore(&rxq->lock, flags); - - BUG_ON(rxb->page); - rxb->page = page; - /* Get physical address of the RB */ - rxb->page_dma = dma_map_page(trans->dev, page, 0, - PAGE_SIZE << hw_params(trans).rx_page_order, - DMA_FROM_DEVICE); - /* dma address must be no more than 36 bits */ - BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); - /* and also 256 byte aligned! */ - BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); - - spin_lock_irqsave(&rxq->lock, flags); - - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - - spin_unlock_irqrestore(&rxq->lock, flags); - } -} - -void iwlagn_rx_replenish(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - unsigned long flags; - - iwlagn_rx_allocate(trans, GFP_KERNEL); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwlagn_rx_queue_restock(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -static void iwlagn_rx_replenish_now(struct iwl_trans *trans) -{ - iwlagn_rx_allocate(trans, GFP_ATOMIC); - - iwlagn_rx_queue_restock(trans); -} - -void iwl_bg_rx_replenish(struct work_struct *data) -{ - struct iwl_trans_pcie *trans_pcie = - container_of(data, struct iwl_trans_pcie, rx_replenish); - - iwlagn_rx_replenish(trans_pcie->trans); -} - -static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, - struct iwl_rx_mem_buffer *rxb) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct iwl_tx_queue *txq = &trans_pcie->txq[trans_pcie->cmd_queue]; - struct iwl_device_cmd *cmd; - unsigned long flags; - int len, err; - u16 sequence; - struct iwl_rx_cmd_buffer rxcb; - struct iwl_rx_packet *pkt; - bool reclaim; - int index, cmd_index; - - if (WARN_ON(!rxb)) - return; - - rxcb.truesize = PAGE_SIZE << hw_params(trans).rx_page_order; - dma_unmap_page(trans->dev, rxb->page_dma, - rxcb.truesize, - DMA_FROM_DEVICE); - - rxcb._page = rxb->page; - pkt = rxb_addr(&rxcb); - - IWL_DEBUG_RX(trans, "%s, 0x%02x\n", - get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd); - - - len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - len += sizeof(u32); /* account for status word */ - trace_iwlwifi_dev_rx(trans->dev, pkt, len); - - /* Reclaim a command buffer only if this packet is a response - * to a (driver-originated) command. - * If the packet (e.g. Rx frame) originated from uCode, - * there is no command buffer to reclaim. - * Ucode should set SEQ_RX_FRAME bit if ucode-originated, - * but apparently a few don't get set; catch them here. */ - reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME); - if (reclaim) { - int i; - - for (i = 0; i < trans_pcie->n_no_reclaim_cmds; i++) { - if (trans_pcie->no_reclaim_cmds[i] == pkt->hdr.cmd) { - reclaim = false; - break; - } - } - } - - sequence = le16_to_cpu(pkt->hdr.sequence); - index = SEQ_TO_INDEX(sequence); - cmd_index = get_cmd_index(&txq->q, index); - - if (reclaim) - cmd = txq->cmd[cmd_index]; - else - cmd = NULL; - - err = iwl_op_mode_rx(trans->op_mode, &rxcb, cmd); - - /* - * XXX: After here, we should always check rxcb._page - * against NULL before touching it or its virtual - * memory (pkt). Because some rx_handler might have - * already taken or freed the pages. - */ - - if (reclaim) { - /* Invoke any callbacks, transfer the buffer to caller, - * and fire off the (possibly) blocking - * iwl_trans_send_cmd() - * as we reclaim the driver command queue */ - if (rxcb._page) - iwl_tx_cmd_complete(trans, &rxcb, err); - else - IWL_WARN(trans, "Claim null rxb?\n"); - } - - /* page was stolen from us */ - if (rxcb._page == NULL) - rxb->page = NULL; - - /* Reuse the page if possible. For notification packets and - * SKBs that fail to Rx correctly, add them back into the - * rx_free list for reuse later. */ - spin_lock_irqsave(&rxq->lock, flags); - if (rxb->page != NULL) { - rxb->page_dma = - dma_map_page(trans->dev, rxb->page, 0, - PAGE_SIZE << hw_params(trans).rx_page_order, - DMA_FROM_DEVICE); - list_add_tail(&rxb->list, &rxq->rx_free); - rxq->free_count++; - } else - list_add_tail(&rxb->list, &rxq->rx_used); - spin_unlock_irqrestore(&rxq->lock, flags); -} - -/** - * iwl_rx_handle - Main entry function for receiving responses from uCode - * - * Uses the priv->rx_handlers callback function array to invoke - * the appropriate handlers, including command responses, - * frame-received notifications, and other notifications. - */ -static void iwl_rx_handle(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - u32 r, i; - u8 fill_rx = 0; - u32 count = 8; - int total_empty; - - /* uCode's read index (stored in shared DRAM) indicates the last Rx - * buffer that the driver may process (last buffer filled by ucode). */ - r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF; - i = rxq->read; - - /* Rx interrupt, but nothing sent from uCode */ - if (i == r) - IWL_DEBUG_RX(trans, "r = %d, i = %d\n", r, i); - - /* calculate total frames need to be restock after handling RX */ - total_empty = r - rxq->write_actual; - if (total_empty < 0) - total_empty += RX_QUEUE_SIZE; - - if (total_empty > (RX_QUEUE_SIZE / 2)) - fill_rx = 1; - - while (i != r) { - struct iwl_rx_mem_buffer *rxb; - - rxb = rxq->queue[i]; - rxq->queue[i] = NULL; - - IWL_DEBUG_RX(trans, "rxbuf: r = %d, i = %d (%p)\n", rxb); - - iwl_rx_handle_rxbuf(trans, rxb); - - i = (i + 1) & RX_QUEUE_MASK; - /* If there are a lot of unused frames, - * restock the Rx queue so ucode wont assert. */ - if (fill_rx) { - count++; - if (count >= 8) { - rxq->read = i; - iwlagn_rx_replenish_now(trans); - count = 0; - } - } - } - - /* Backtrack one entry */ - rxq->read = i; - if (fill_rx) - iwlagn_rx_replenish_now(trans); - else - iwlagn_rx_queue_restock(trans); -} - -static const char * const desc_lookup_text[] = { - "OK", - "FAIL", - "BAD_PARAM", - "BAD_CHECKSUM", - "NMI_INTERRUPT_WDG", - "SYSASSERT", - "FATAL_ERROR", - "BAD_COMMAND", - "HW_ERROR_TUNE_LOCK", - "HW_ERROR_TEMPERATURE", - "ILLEGAL_CHAN_FREQ", - "VCC_NOT_STABLE", - "FH_ERROR", - "NMI_INTERRUPT_HOST", - "NMI_INTERRUPT_ACTION_PT", - "NMI_INTERRUPT_UNKNOWN", - "UCODE_VERSION_MISMATCH", - "HW_ERROR_ABS_LOCK", - "HW_ERROR_CAL_LOCK_FAIL", - "NMI_INTERRUPT_INST_ACTION_PT", - "NMI_INTERRUPT_DATA_ACTION_PT", - "NMI_TRM_HW_ER", - "NMI_INTERRUPT_TRM", - "NMI_INTERRUPT_BREAK_POINT", - "DEBUG_0", - "DEBUG_1", - "DEBUG_2", - "DEBUG_3", -}; - -static struct { char *name; u8 num; } advanced_lookup[] = { - { "NMI_INTERRUPT_WDG", 0x34 }, - { "SYSASSERT", 0x35 }, - { "UCODE_VERSION_MISMATCH", 0x37 }, - { "BAD_COMMAND", 0x38 }, - { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C }, - { "FATAL_ERROR", 0x3D }, - { "NMI_TRM_HW_ERR", 0x46 }, - { "NMI_INTERRUPT_TRM", 0x4C }, - { "NMI_INTERRUPT_BREAK_POINT", 0x54 }, - { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C }, - { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 }, - { "NMI_INTERRUPT_HOST", 0x66 }, - { "NMI_INTERRUPT_ACTION_PT", 0x7C }, - { "NMI_INTERRUPT_UNKNOWN", 0x84 }, - { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 }, - { "ADVANCED_SYSASSERT", 0 }, -}; - -static const char *desc_lookup(u32 num) -{ - int i; - int max = ARRAY_SIZE(desc_lookup_text); - - if (num < max) - return desc_lookup_text[num]; - - max = ARRAY_SIZE(advanced_lookup) - 1; - for (i = 0; i < max; i++) { - if (advanced_lookup[i].num == num) - break; - } - return advanced_lookup[i].name; -} - -#define ERROR_START_OFFSET (1 * sizeof(u32)) -#define ERROR_ELEM_SIZE (7 * sizeof(u32)) - -static void iwl_dump_nic_error_log(struct iwl_trans *trans) -{ - u32 base; - struct iwl_error_event_table table; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - base = trans->shrd->device_pointers.error_event_table; - if (trans->shrd->ucode_type == IWL_UCODE_INIT) { - if (!base) - base = trans->shrd->fw->init_errlog_ptr; - } else { - if (!base) - base = trans->shrd->fw->inst_errlog_ptr; - } - - if (!iwlagn_hw_valid_rtc_data_addr(base)) { - IWL_ERR(trans, - "Not valid error log pointer 0x%08X for %s uCode\n", - base, - (trans->shrd->ucode_type == IWL_UCODE_INIT) - ? "Init" : "RT"); - return; - } - - iwl_read_targ_mem_words(trans, base, &table, sizeof(table)); - - if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) { - IWL_ERR(trans, "Start IWL Error Log Dump:\n"); - IWL_ERR(trans, "Status: 0x%08lX, count: %d\n", - trans->shrd->status, table.valid); - } - - trans_pcie->isr_stats.err_code = table.error_id; - - trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low, - table.data1, table.data2, table.line, - table.blink1, table.blink2, table.ilink1, - table.ilink2, table.bcon_time, table.gp1, - table.gp2, table.gp3, table.ucode_ver, - table.hw_ver, table.brd_ver); - IWL_ERR(trans, "0x%08X | %-28s\n", table.error_id, - desc_lookup(table.error_id)); - IWL_ERR(trans, "0x%08X | uPc\n", table.pc); - IWL_ERR(trans, "0x%08X | branchlink1\n", table.blink1); - IWL_ERR(trans, "0x%08X | branchlink2\n", table.blink2); - IWL_ERR(trans, "0x%08X | interruptlink1\n", table.ilink1); - IWL_ERR(trans, "0x%08X | interruptlink2\n", table.ilink2); - IWL_ERR(trans, "0x%08X | data1\n", table.data1); - IWL_ERR(trans, "0x%08X | data2\n", table.data2); - IWL_ERR(trans, "0x%08X | line\n", table.line); - IWL_ERR(trans, "0x%08X | beacon time\n", table.bcon_time); - IWL_ERR(trans, "0x%08X | tsf low\n", table.tsf_low); - IWL_ERR(trans, "0x%08X | tsf hi\n", table.tsf_hi); - IWL_ERR(trans, "0x%08X | time gp1\n", table.gp1); - IWL_ERR(trans, "0x%08X | time gp2\n", table.gp2); - IWL_ERR(trans, "0x%08X | time gp3\n", table.gp3); - IWL_ERR(trans, "0x%08X | uCode version\n", table.ucode_ver); - IWL_ERR(trans, "0x%08X | hw version\n", table.hw_ver); - IWL_ERR(trans, "0x%08X | board version\n", table.brd_ver); - IWL_ERR(trans, "0x%08X | hcmd\n", table.hcmd); - - IWL_ERR(trans, "0x%08X | isr0\n", table.isr0); - IWL_ERR(trans, "0x%08X | isr1\n", table.isr1); - IWL_ERR(trans, "0x%08X | isr2\n", table.isr2); - IWL_ERR(trans, "0x%08X | isr3\n", table.isr3); - IWL_ERR(trans, "0x%08X | isr4\n", table.isr4); - IWL_ERR(trans, "0x%08X | isr_pref\n", table.isr_pref); - IWL_ERR(trans, "0x%08X | wait_event\n", table.wait_event); - IWL_ERR(trans, "0x%08X | l2p_control\n", table.l2p_control); - IWL_ERR(trans, "0x%08X | l2p_duration\n", table.l2p_duration); - IWL_ERR(trans, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid); - IWL_ERR(trans, "0x%08X | l2p_addr_match\n", table.l2p_addr_match); - IWL_ERR(trans, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel); - IWL_ERR(trans, "0x%08X | timestamp\n", table.u_timestamp); - IWL_ERR(trans, "0x%08X | flow_handler\n", table.flow_handler); -} - -/** - * iwl_irq_handle_error - called for HW or SW error interrupt from card - */ -static void iwl_irq_handle_error(struct iwl_trans *trans) -{ - /* W/A for WiFi/WiMAX coex and WiMAX own the RF */ - if (cfg(trans)->internal_wimax_coex && - (!(iwl_read_prph(trans, APMG_CLK_CTRL_REG) & - APMS_CLK_VAL_MRB_FUNC_MODE) || - (iwl_read_prph(trans, APMG_PS_CTRL_REG) & - APMG_PS_CTRL_VAL_RESET_REQ))) { - /* - * Keep the restart process from trying to send host - * commands by clearing the ready bit. - */ - clear_bit(STATUS_READY, &trans->shrd->status); - clear_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status); - wake_up(&trans->wait_command_queue); - IWL_ERR(trans, "RF is used by WiMAX\n"); - return; - } - - IWL_ERR(trans, "Loaded firmware version: %s\n", - trans->shrd->fw->fw_version); - - iwl_dump_nic_error_log(trans); - iwl_dump_csr(trans); - iwl_dump_fh(trans, NULL, false); - iwl_dump_nic_event_log(trans, false, NULL, false); - - iwl_op_mode_nic_error(trans->op_mode); -} - -#define EVENT_START_OFFSET (4 * sizeof(u32)) - -/** - * iwl_print_event_log - Dump error event log to syslog - * - */ -static int iwl_print_event_log(struct iwl_trans *trans, u32 start_idx, - u32 num_events, u32 mode, - int pos, char **buf, size_t bufsz) -{ - u32 i; - u32 base; /* SRAM byte address of event log header */ - u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ - u32 ptr; /* SRAM byte address of log data */ - u32 ev, time, data; /* event log data */ - unsigned long reg_flags; - - if (num_events == 0) - return pos; - - base = trans->shrd->device_pointers.log_event_table; - if (trans->shrd->ucode_type == IWL_UCODE_INIT) { - if (!base) - base = trans->shrd->fw->init_evtlog_ptr; - } else { - if (!base) - base = trans->shrd->fw->inst_evtlog_ptr; - } - - if (mode == 0) - event_size = 2 * sizeof(u32); - else - event_size = 3 * sizeof(u32); - - ptr = base + EVENT_START_OFFSET + (start_idx * event_size); - - /* Make sure device is powered up for SRAM reads */ - spin_lock_irqsave(&trans->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(trans))) - goto out_unlock; - - /* Set starting address; reads will auto-increment */ - iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr); - - /* "time" is actually "data" for mode 0 (no timestamp). - * place event id # at far right for easier visual parsing. */ - for (i = 0; i < num_events; i++) { - ev = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - time = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - if (mode == 0) { - /* data, ev */ - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "EVT_LOG:0x%08x:%04u\n", - time, ev); - } else { - trace_iwlwifi_dev_ucode_event(trans->dev, 0, - time, ev); - IWL_ERR(trans, "EVT_LOG:0x%08x:%04u\n", - time, ev); - } - } else { - data = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - if (bufsz) { - pos += scnprintf(*buf + pos, bufsz - pos, - "EVT_LOGT:%010u:0x%08x:%04u\n", - time, data, ev); - } else { - IWL_ERR(trans, "EVT_LOGT:%010u:0x%08x:%04u\n", - time, data, ev); - trace_iwlwifi_dev_ucode_event(trans->dev, time, - data, ev); - } - } - } - - /* Allow device to power down */ - iwl_release_nic_access(trans); -out_unlock: - spin_unlock_irqrestore(&trans->reg_lock, reg_flags); - return pos; -} - -/** - * iwl_print_last_event_logs - Dump the newest # of event log to syslog - */ -static int iwl_print_last_event_logs(struct iwl_trans *trans, u32 capacity, - u32 num_wraps, u32 next_entry, - u32 size, u32 mode, - int pos, char **buf, size_t bufsz) -{ - /* - * display the newest DEFAULT_LOG_ENTRIES entries - * i.e the entries just before the next ont that uCode would fill. - */ - if (num_wraps) { - if (next_entry < size) { - pos = iwl_print_event_log(trans, - capacity - (size - next_entry), - size - next_entry, mode, - pos, buf, bufsz); - pos = iwl_print_event_log(trans, 0, - next_entry, mode, - pos, buf, bufsz); - } else - pos = iwl_print_event_log(trans, next_entry - size, - size, mode, pos, buf, bufsz); - } else { - if (next_entry < size) { - pos = iwl_print_event_log(trans, 0, next_entry, - mode, pos, buf, bufsz); - } else { - pos = iwl_print_event_log(trans, next_entry - size, - size, mode, pos, buf, bufsz); - } - } - return pos; -} - -#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20) - -int iwl_dump_nic_event_log(struct iwl_trans *trans, bool full_log, - char **buf, bool display) -{ - u32 base; /* SRAM byte address of event log header */ - u32 capacity; /* event log capacity in # entries */ - u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */ - u32 num_wraps; /* # times uCode wrapped to top of log */ - u32 next_entry; /* index of next entry to be written by uCode */ - u32 size; /* # entries that we'll print */ - u32 logsize; - int pos = 0; - size_t bufsz = 0; - - base = trans->shrd->device_pointers.log_event_table; - if (trans->shrd->ucode_type == IWL_UCODE_INIT) { - logsize = trans->shrd->fw->init_evtlog_size; - if (!base) - base = trans->shrd->fw->init_evtlog_ptr; - } else { - logsize = trans->shrd->fw->inst_evtlog_size; - if (!base) - base = trans->shrd->fw->inst_evtlog_ptr; - } - - if (!iwlagn_hw_valid_rtc_data_addr(base)) { - IWL_ERR(trans, - "Invalid event log pointer 0x%08X for %s uCode\n", - base, - (trans->shrd->ucode_type == IWL_UCODE_INIT) - ? "Init" : "RT"); - return -EINVAL; - } - - /* event log header */ - capacity = iwl_read_targ_mem(trans, base); - mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32))); - - if (capacity > logsize) { - IWL_ERR(trans, "Log capacity %d is bogus, limit to %d " - "entries\n", capacity, logsize); - capacity = logsize; - } - - if (next_entry > logsize) { - IWL_ERR(trans, "Log write index %d is bogus, limit to %d\n", - next_entry, logsize); - next_entry = logsize; - } - - size = num_wraps ? capacity : next_entry; - - /* bail out if nothing in log */ - if (size == 0) { - IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n"); - return pos; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log) - size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; -#else - size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES) - ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size; -#endif - IWL_ERR(trans, "Start IWL Event Log Dump: display last %u entries\n", - size); - -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - if (full_log) - bufsz = capacity * 48; - else - bufsz = size * 48; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - } - if (iwl_have_debug_level(IWL_DL_FW_ERRORS) || full_log) { - /* - * if uCode has wrapped back to top of log, - * start at the oldest entry, - * i.e the next one that uCode would fill. - */ - if (num_wraps) - pos = iwl_print_event_log(trans, next_entry, - capacity - next_entry, mode, - pos, buf, bufsz); - /* (then/else) start at top of log */ - pos = iwl_print_event_log(trans, 0, - next_entry, mode, pos, buf, bufsz); - } else - pos = iwl_print_last_event_logs(trans, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#else - pos = iwl_print_last_event_logs(trans, capacity, num_wraps, - next_entry, size, mode, - pos, buf, bufsz); -#endif - return pos; -} - -/* tasklet for iwlagn interrupt */ -void iwl_irq_tasklet(struct iwl_trans *trans) -{ - u32 inta = 0; - u32 handled = 0; - unsigned long flags; - u32 i; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_mask; -#endif - - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct isr_statistics *isr_stats = &trans_pcie->isr_stats; - - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Ack/clear/reset pending uCode interrupts. - * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS, - */ - /* There is a hardware bug in the interrupt mask function that some - * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if - * they are disabled in the CSR_INT_MASK register. Furthermore the - * ICT interrupt handling mechanism has another bug that might cause - * these unmasked interrupts fail to be detected. We workaround the - * hardware bugs here by ACKing all the possible interrupts so that - * interrupt coalescing can still be achieved. - */ - iwl_write32(trans, CSR_INT, - trans_pcie->inta | ~trans_pcie->inta_mask); - - inta = trans_pcie->inta; - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_ISR)) { - /* just for debug */ - inta_mask = iwl_read32(trans, CSR_INT_MASK); - IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n ", - inta, inta_mask); - } -#endif - - /* saved interrupt in inta variable now we can reset trans_pcie->inta */ - trans_pcie->inta = 0; - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - /* Now service all interrupt bits discovered above. */ - if (inta & CSR_INT_BIT_HW_ERR) { - IWL_ERR(trans, "Hardware error detected. Restarting.\n"); - - /* Tell the device to stop sending interrupts */ - iwl_disable_interrupts(trans); - - isr_stats->hw++; - iwl_irq_handle_error(trans); - - handled |= CSR_INT_BIT_HW_ERR; - - return; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_ISR)) { - /* NIC fires this, but we don't use it, redundant with WAKEUP */ - if (inta & CSR_INT_BIT_SCD) { - IWL_DEBUG_ISR(trans, "Scheduler finished to transmit " - "the frame/frames.\n"); - isr_stats->sch++; - } - - /* Alive notification via Rx interrupt will do the real work */ - if (inta & CSR_INT_BIT_ALIVE) { - IWL_DEBUG_ISR(trans, "Alive interrupt\n"); - isr_stats->alive++; - } - } -#endif - /* Safely ignore these bits for debug checks below */ - inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE); - - /* HW RF KILL switch toggled */ - if (inta & CSR_INT_BIT_RF_KILL) { - bool hw_rfkill; - - hw_rfkill = !(iwl_read32(trans, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); - IWL_WARN(trans, "RF_KILL bit toggled to %s.\n", - hw_rfkill ? "disable radio" : "enable radio"); - - isr_stats->rfkill++; - - iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - - handled |= CSR_INT_BIT_RF_KILL; - } - - /* Chip got too hot and stopped itself */ - if (inta & CSR_INT_BIT_CT_KILL) { - IWL_ERR(trans, "Microcode CT kill error detected.\n"); - isr_stats->ctkill++; - handled |= CSR_INT_BIT_CT_KILL; - } - - /* Error detected by uCode */ - if (inta & CSR_INT_BIT_SW_ERR) { - IWL_ERR(trans, "Microcode SW error detected. " - " Restarting 0x%X.\n", inta); - isr_stats->sw++; - iwl_irq_handle_error(trans); - handled |= CSR_INT_BIT_SW_ERR; - } - - /* uCode wakes up after power-down sleep */ - if (inta & CSR_INT_BIT_WAKEUP) { - IWL_DEBUG_ISR(trans, "Wakeup interrupt\n"); - iwl_rx_queue_update_write_ptr(trans, &trans_pcie->rxq); - for (i = 0; i < cfg(trans)->base_params->num_of_queues; i++) - iwl_txq_update_write_ptr(trans, - &trans_pcie->txq[i]); - - isr_stats->wakeup++; - - handled |= CSR_INT_BIT_WAKEUP; - } - - /* All uCode command responses, including Tx command responses, - * Rx "responses" (frame-received notification), and other - * notifications from uCode come through here*/ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX | - CSR_INT_BIT_RX_PERIODIC)) { - IWL_DEBUG_ISR(trans, "Rx interrupt\n"); - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) { - handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX); - iwl_write32(trans, CSR_FH_INT_STATUS, - CSR_FH_INT_RX_MASK); - } - if (inta & CSR_INT_BIT_RX_PERIODIC) { - handled |= CSR_INT_BIT_RX_PERIODIC; - iwl_write32(trans, - CSR_INT, CSR_INT_BIT_RX_PERIODIC); - } - /* Sending RX interrupt require many steps to be done in the - * the device: - * 1- write interrupt to current index in ICT table. - * 2- dma RX frame. - * 3- update RX shared data to indicate last write index. - * 4- send interrupt. - * This could lead to RX race, driver could receive RX interrupt - * but the shared data changes does not reflect this; - * periodic interrupt will detect any dangling Rx activity. - */ - - /* Disable periodic interrupt; we use it as just a one-shot. */ - iwl_write8(trans, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_DIS); -#ifdef CONFIG_IWLWIFI_IDI - iwl_amfh_rx_handler(); -#else - iwl_rx_handle(trans); -#endif - /* - * Enable periodic interrupt in 8 msec only if we received - * real RX interrupt (instead of just periodic int), to catch - * any dangling Rx interrupt. If it was just the periodic - * interrupt, there was no dangling Rx activity, and no need - * to extend the periodic interrupt; one-shot is enough. - */ - if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) - iwl_write8(trans, CSR_INT_PERIODIC_REG, - CSR_INT_PERIODIC_ENA); - - isr_stats->rx++; - } - - /* This "Tx" DMA channel is used only for loading uCode */ - if (inta & CSR_INT_BIT_FH_TX) { - iwl_write32(trans, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK); - IWL_DEBUG_ISR(trans, "uCode load interrupt\n"); - isr_stats->tx++; - handled |= CSR_INT_BIT_FH_TX; - /* Wake up uCode load routine, now that load is complete */ - trans_pcie->ucode_write_complete = true; - wake_up(&trans_pcie->ucode_write_waitq); - } - - if (inta & ~handled) { - IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled); - isr_stats->unhandled++; - } - - if (inta & ~(trans_pcie->inta_mask)) { - IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n", - inta & ~trans_pcie->inta_mask); - } - - /* Re-enable all interrupts */ - /* only Re-enable if disabled by irq */ - if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status)) - iwl_enable_interrupts(trans); - /* Re-enable RF_KILL if it occurred */ - else if (handled & CSR_INT_BIT_RF_KILL) - iwl_enable_rfkill_int(trans); -} - -/****************************************************************************** - * - * ICT functions - * - ******************************************************************************/ - -/* a device (PCI-E) page is 4096 bytes long */ -#define ICT_SHIFT 12 -#define ICT_SIZE (1 << ICT_SHIFT) -#define ICT_COUNT (ICT_SIZE / sizeof(u32)) - -/* Free dram table */ -void iwl_free_isr_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - if (trans_pcie->ict_tbl) { - dma_free_coherent(trans->dev, ICT_SIZE, - trans_pcie->ict_tbl, - trans_pcie->ict_tbl_dma); - trans_pcie->ict_tbl = NULL; - trans_pcie->ict_tbl_dma = 0; - } -} - - -/* - * allocate dram shared table, it is an aligned memory - * block of ICT_SIZE. - * also reset all data related to ICT table interrupt. - */ -int iwl_alloc_isr_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - trans_pcie->ict_tbl = - dma_alloc_coherent(trans->dev, ICT_SIZE, - &trans_pcie->ict_tbl_dma, - GFP_KERNEL); - if (!trans_pcie->ict_tbl) - return -ENOMEM; - - /* just an API sanity check ... it is guaranteed to be aligned */ - if (WARN_ON(trans_pcie->ict_tbl_dma & (ICT_SIZE - 1))) { - iwl_free_isr_ict(trans); - return -EINVAL; - } - - IWL_DEBUG_ISR(trans, "ict dma addr %Lx\n", - (unsigned long long)trans_pcie->ict_tbl_dma); - - IWL_DEBUG_ISR(trans, "ict vir addr %p\n", trans_pcie->ict_tbl); - - /* reset table and index to all 0 */ - memset(trans_pcie->ict_tbl, 0, ICT_SIZE); - trans_pcie->ict_index = 0; - - /* add periodic RX interrupt */ - trans_pcie->inta_mask |= CSR_INT_BIT_RX_PERIODIC; - return 0; -} - -/* Device is going up inform it about using ICT interrupt table, - * also we need to tell the driver to start using ICT interrupt. - */ -void iwl_reset_ict(struct iwl_trans *trans) -{ - u32 val; - unsigned long flags; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - if (!trans_pcie->ict_tbl) - return; - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwl_disable_interrupts(trans); - - memset(trans_pcie->ict_tbl, 0, ICT_SIZE); - - val = trans_pcie->ict_tbl_dma >> ICT_SHIFT; - - val |= CSR_DRAM_INT_TBL_ENABLE; - val |= CSR_DRAM_INIT_TBL_WRAP_CHECK; - - IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%x\n", val); - - iwl_write32(trans, CSR_DRAM_INT_TBL_REG, val); - trans_pcie->use_ict = true; - trans_pcie->ict_index = 0; - iwl_write32(trans, CSR_INT, trans_pcie->inta_mask); - iwl_enable_interrupts(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -/* Device is going down disable ict interrupt usage */ -void iwl_disable_ict(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - unsigned long flags; - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - trans_pcie->use_ict = false; - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -static irqreturn_t iwl_isr(int irq, void *data) -{ - struct iwl_trans *trans = data; - struct iwl_trans_pcie *trans_pcie; - u32 inta, inta_mask; - unsigned long flags; -#ifdef CONFIG_IWLWIFI_DEBUG - u32 inta_fh; -#endif - if (!trans) - return IRQ_NONE; - - trace_iwlwifi_dev_irq(trans->dev); - - trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. */ - inta_mask = iwl_read32(trans, CSR_INT_MASK); /* just for debug */ - iwl_write32(trans, CSR_INT_MASK, 0x00000000); - - /* Discover which interrupts are active/pending */ - inta = iwl_read32(trans, CSR_INT); - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - if (!inta) { - IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); - goto none; - } - - if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { - /* Hardware disappeared. It might have already raised - * an interrupt */ - IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta); - goto unplugged; - } - -#ifdef CONFIG_IWLWIFI_DEBUG - if (iwl_have_debug_level(IWL_DL_ISR)) { - inta_fh = iwl_read32(trans, CSR_FH_INT_STATUS); - IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x, " - "fh 0x%08x\n", inta, inta_mask, inta_fh); - } -#endif - - trans_pcie->inta |= inta; - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - unplugged: - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. */ - /* only Re-enable if disabled by irq and no schedules tasklet. */ - if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_NONE; -} - -/* interrupt handler using ict table, with this interrupt driver will - * stop using INTA register to get device's interrupt, reading this register - * is expensive, device will write interrupts in ICT dram table, increment - * index then will fire interrupt to driver, driver will OR all ICT table - * entries from current index up to table entry with 0 value. the result is - * the interrupt we need to service, driver will set the entries back to 0 and - * set index. - */ -irqreturn_t iwl_isr_ict(int irq, void *data) -{ - struct iwl_trans *trans = data; - struct iwl_trans_pcie *trans_pcie; - u32 inta, inta_mask; - u32 val = 0; - u32 read; - unsigned long flags; - - if (!trans) - return IRQ_NONE; - - trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - /* dram interrupt table not set yet, - * use legacy interrupt. - */ - if (!trans_pcie->use_ict) - return iwl_isr(irq, data); - - trace_iwlwifi_dev_irq(trans->dev); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Disable (but don't clear!) interrupts here to avoid - * back-to-back ISRs and sporadic interrupts from our NIC. - * If we have something to service, the tasklet will re-enable ints. - * If we *don't* have something, we'll re-enable before leaving here. - */ - inta_mask = iwl_read32(trans, CSR_INT_MASK); /* just for debug */ - iwl_write32(trans, CSR_INT_MASK, 0x00000000); - - - /* Ignore interrupt if there's nothing in NIC to service. - * This may be due to IRQ shared with another device, - * or due to sporadic interrupts thrown from our NIC. */ - read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); - trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, read); - if (!read) { - IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n"); - goto none; - } - - /* - * Collect all entries up to the first 0, starting from ict_index; - * note we already read at ict_index. - */ - do { - val |= read; - IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n", - trans_pcie->ict_index, read); - trans_pcie->ict_tbl[trans_pcie->ict_index] = 0; - trans_pcie->ict_index = - iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT); - - read = le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]); - trace_iwlwifi_dev_ict_read(trans->dev, trans_pcie->ict_index, - read); - } while (read); - - /* We should not get this value, just ignore it. */ - if (val == 0xffffffff) - val = 0; - - /* - * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit - * (bit 15 before shifting it to 31) to clear when using interrupt - * coalescing. fortunately, bits 18 and 19 stay set when this happens - * so we use them to decide on the real state of the Rx bit. - * In order words, bit 15 is set if bit 18 or bit 19 are set. - */ - if (val & 0xC0000) - val |= 0x8000; - - inta = (0xff & val) | ((0xff00 & val) << 16); - IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n", - inta, inta_mask, val); - - inta &= trans_pcie->inta_mask; - trans_pcie->inta |= inta; - - /* iwl_irq_tasklet() will service interrupts and re-enable them */ - if (likely(inta)) - tasklet_schedule(&trans_pcie->irq_tasklet); - else if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) { - /* Allow interrupt if was disabled by this handler and - * no tasklet was schedules, We should not enable interrupt, - * tasklet will enable it. - */ - iwl_enable_interrupts(trans); - } - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_HANDLED; - - none: - /* re-enable interrupts here since we don't have anything to service. - * only Re-enable if disabled by irq. - */ - if (test_bit(STATUS_INT_ENABLED, &trans_pcie->status) && - !trans_pcie->inta) - iwl_enable_interrupts(trans); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - return IRQ_NONE; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c deleted file mode 100644 index d7964b12..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c +++ /dev/null @@ -1,1113 +0,0 @@ -/****************************************************************************** - * - * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. - * - * Portions of this file are derived from the ipw3945 project, as well - * as portions of the ieee80211 subsystem header files. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * The full GNU General Public License is included in this distribution in the - * file called LICENSE. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ -#include <linux/etherdevice.h> -#include <linux/slab.h> -#include <linux/sched.h> - -#include "iwl-debug.h" -#include "iwl-csr.h" -#include "iwl-prph.h" -#include "iwl-io.h" -#include "iwl-agn-hw.h" -#include "iwl-op-mode.h" -#include "iwl-trans-pcie-int.h" - -#define IWL_TX_CRC_SIZE 4 -#define IWL_TX_DELIMITER_SIZE 4 - -/* - * mac80211 queues, ACs, hardware queues, FIFOs. - * - * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues - * - * Mac80211 uses the following numbers, which we get as from it - * by way of skb_get_queue_mapping(skb): - * - * VO 0 - * VI 1 - * BE 2 - * BK 3 - * - * - * Regular (not A-MPDU) frames are put into hardware queues corresponding - * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their - * own queue per aggregation session (RA/TID combination), such queues are - * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In - * order to map frames to the right queue, we also need an AC->hw queue - * mapping. This is implemented here. - * - * Due to the way hw queues are set up (by the hw specific code), the AC->hw - * queue mapping is the identity mapping. - */ - -static const u8 tid_to_ac[] = { - IEEE80211_AC_BE, - IEEE80211_AC_BK, - IEEE80211_AC_BK, - IEEE80211_AC_BE, - IEEE80211_AC_VI, - IEEE80211_AC_VI, - IEEE80211_AC_VO, - IEEE80211_AC_VO -}; - - -/** - * iwl_trans_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array - */ -void iwl_trans_txq_update_byte_cnt_tbl(struct iwl_trans *trans, - struct iwl_tx_queue *txq, - u16 byte_cnt) -{ - struct iwlagn_scd_bc_tbl *scd_bc_tbl; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - int write_ptr = txq->q.write_ptr; - int txq_id = txq->q.id; - u8 sec_ctl = 0; - u8 sta_id = 0; - u16 len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; - __le16 bc_ent; - struct iwl_tx_cmd *tx_cmd = - (struct iwl_tx_cmd *) txq->cmd[txq->q.write_ptr]->payload; - - scd_bc_tbl = trans_pcie->scd_bc_tbls.addr; - - WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX); - - sta_id = tx_cmd->sta_id; - sec_ctl = tx_cmd->sec_ctl; - - switch (sec_ctl & TX_CMD_SEC_MSK) { - case TX_CMD_SEC_CCM: - len += CCMP_MIC_LEN; - break; - case TX_CMD_SEC_TKIP: - len += TKIP_ICV_LEN; - break; - case TX_CMD_SEC_WEP: - len += WEP_IV_LEN + WEP_ICV_LEN; - break; - } - - bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12)); - - scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; - - if (write_ptr < TFD_QUEUE_SIZE_BC_DUP) - scd_bc_tbl[txq_id]. - tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent; -} - -/** - * iwl_txq_update_write_ptr - Send new write index to hardware - */ -void iwl_txq_update_write_ptr(struct iwl_trans *trans, struct iwl_tx_queue *txq) -{ - u32 reg = 0; - int txq_id = txq->q.id; - - if (txq->need_update == 0) - return; - - if (cfg(trans)->base_params->shadow_reg_enable) { - /* shadow register enabled */ - iwl_write32(trans, HBUS_TARG_WRPTR, - txq->q.write_ptr | (txq_id << 8)); - } else { - /* if we're trying to save power */ - if (test_bit(STATUS_POWER_PMI, &trans->shrd->status)) { - /* wake up nic if it's powered down ... - * uCode will wake up, and interrupt us again, so next - * time we'll skip this part. */ - reg = iwl_read32(trans, CSR_UCODE_DRV_GP1); - - if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) { - IWL_DEBUG_INFO(trans, - "Tx queue %d requesting wakeup," - " GP1 = 0x%x\n", txq_id, reg); - iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - return; - } - - iwl_write_direct32(trans, HBUS_TARG_WRPTR, - txq->q.write_ptr | (txq_id << 8)); - - /* - * else not in power-save mode, - * uCode will never sleep when we're - * trying to tx (during RFKILL, we're not trying to tx). - */ - } else - iwl_write32(trans, HBUS_TARG_WRPTR, - txq->q.write_ptr | (txq_id << 8)); - } - txq->need_update = 0; -} - -static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx) -{ - struct iwl_tfd_tb *tb = &tfd->tbs[idx]; - - dma_addr_t addr = get_unaligned_le32(&tb->lo); - if (sizeof(dma_addr_t) > sizeof(u32)) - addr |= - ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16; - - return addr; -} - -static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx) -{ - struct iwl_tfd_tb *tb = &tfd->tbs[idx]; - - return le16_to_cpu(tb->hi_n_len) >> 4; -} - -static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx, - dma_addr_t addr, u16 len) -{ - struct iwl_tfd_tb *tb = &tfd->tbs[idx]; - u16 hi_n_len = len << 4; - - put_unaligned_le32(addr, &tb->lo); - if (sizeof(dma_addr_t) > sizeof(u32)) - hi_n_len |= ((addr >> 16) >> 16) & 0xF; - - tb->hi_n_len = cpu_to_le16(hi_n_len); - - tfd->num_tbs = idx + 1; -} - -static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) -{ - return tfd->num_tbs & 0x1f; -} - -static void iwlagn_unmap_tfd(struct iwl_trans *trans, struct iwl_cmd_meta *meta, - struct iwl_tfd *tfd, enum dma_data_direction dma_dir) -{ - int i; - int num_tbs; - - /* Sanity check on number of chunks */ - num_tbs = iwl_tfd_get_num_tbs(tfd); - - if (num_tbs >= IWL_NUM_OF_TBS) { - IWL_ERR(trans, "Too many chunks: %i\n", num_tbs); - /* @todo issue fatal error, it is quite serious situation */ - return; - } - - /* Unmap tx_cmd */ - if (num_tbs) - dma_unmap_single(trans->dev, - dma_unmap_addr(meta, mapping), - dma_unmap_len(meta, len), - DMA_BIDIRECTIONAL); - - /* Unmap chunks, if any. */ - for (i = 1; i < num_tbs; i++) - dma_unmap_single(trans->dev, iwl_tfd_tb_get_addr(tfd, i), - iwl_tfd_tb_get_len(tfd, i), dma_dir); - - tfd->num_tbs = 0; -} - -/** - * iwlagn_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr] - * @trans - transport private data - * @txq - tx queue - * @dma_dir - the direction of the DMA mapping - * - * Does NOT advance any TFD circular buffer read/write indexes - * Does NOT free the TFD itself (which is within circular buffer) - */ -void iwlagn_txq_free_tfd(struct iwl_trans *trans, struct iwl_tx_queue *txq, - enum dma_data_direction dma_dir) -{ - struct iwl_tfd *tfd_tmp = txq->tfds; - - /* rd_ptr is bounded by n_bd and idx is bounded by n_window */ - int rd_ptr = txq->q.read_ptr; - int idx = get_cmd_index(&txq->q, rd_ptr); - - lockdep_assert_held(&txq->lock); - - /* We have only q->n_window txq->entries, but we use q->n_bd tfds */ - iwlagn_unmap_tfd(trans, &txq->meta[idx], &tfd_tmp[rd_ptr], dma_dir); - - /* free SKB */ - if (txq->skbs) { - struct sk_buff *skb; - - skb = txq->skbs[idx]; - - /* Can be called from irqs-disabled context - * If skb is not NULL, it means that the whole queue is being - * freed and that the queue is not empty - free the skb - */ - if (skb) { - iwl_op_mode_free_skb(trans->op_mode, skb); - txq->skbs[idx] = NULL; - } - } -} - -int iwlagn_txq_attach_buf_to_tfd(struct iwl_trans *trans, - struct iwl_tx_queue *txq, - dma_addr_t addr, u16 len, - u8 reset) -{ - struct iwl_queue *q; - struct iwl_tfd *tfd, *tfd_tmp; - u32 num_tbs; - - q = &txq->q; - tfd_tmp = txq->tfds; - tfd = &tfd_tmp[q->write_ptr]; - - if (reset) - memset(tfd, 0, sizeof(*tfd)); - - num_tbs = iwl_tfd_get_num_tbs(tfd); - - /* Each TFD can point to a maximum 20 Tx buffers */ - if (num_tbs >= IWL_NUM_OF_TBS) { - IWL_ERR(trans, "Error can not send more than %d chunks\n", - IWL_NUM_OF_TBS); - return -EINVAL; - } - - if (WARN_ON(addr & ~DMA_BIT_MASK(36))) - return -EINVAL; - - if (unlikely(addr & ~IWL_TX_DMA_MASK)) - IWL_ERR(trans, "Unaligned address = %llx\n", - (unsigned long long)addr); - - iwl_tfd_set_tb(tfd, num_tbs, addr, len); - - return 0; -} - -/*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** - * DMA services - * - * Theory of operation - * - * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer - * of buffer descriptors, each of which points to one or more data buffers for - * the device to read from or fill. Driver and device exchange status of each - * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty - * entries in each circular buffer, to protect against confusing empty and full - * queue states. - * - * The device reads or writes the data in the queues via the device's several - * DMA/FIFO channels. Each queue is mapped to a single DMA channel. - * - * For Tx queue, there are low mark and high mark limits. If, after queuing - * the packet for Tx, free space become < low mark, Tx queue stopped. When - * reclaiming packets (on 'tx done IRQ), if free space become > high mark, - * Tx queue resumed. - * - ***************************************************/ - -int iwl_queue_space(const struct iwl_queue *q) -{ - int s = q->read_ptr - q->write_ptr; - - if (q->read_ptr > q->write_ptr) - s -= q->n_bd; - - if (s <= 0) - s += q->n_window; - /* keep some reserve to not confuse empty and full situations */ - s -= 2; - if (s < 0) - s = 0; - return s; -} - -/** - * iwl_queue_init - Initialize queue's high/low-water and read/write indexes - */ -int iwl_queue_init(struct iwl_queue *q, int count, int slots_num, u32 id) -{ - q->n_bd = count; - q->n_window = slots_num; - q->id = id; - - /* count must be power-of-two size, otherwise iwl_queue_inc_wrap - * and iwl_queue_dec_wrap are broken. */ - if (WARN_ON(!is_power_of_2(count))) - return -EINVAL; - - /* slots_num must be power-of-two size, otherwise - * get_cmd_index is broken. */ - if (WARN_ON(!is_power_of_2(slots_num))) - return -EINVAL; - - q->low_mark = q->n_window / 4; - if (q->low_mark < 4) - q->low_mark = 4; - - q->high_mark = q->n_window / 8; - if (q->high_mark < 2) - q->high_mark = 2; - - q->write_ptr = q->read_ptr = 0; - - return 0; -} - -static void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_trans *trans, - struct iwl_tx_queue *txq) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwlagn_scd_bc_tbl *scd_bc_tbl = trans_pcie->scd_bc_tbls.addr; - int txq_id = txq->q.id; - int read_ptr = txq->q.read_ptr; - u8 sta_id = 0; - __le16 bc_ent; - struct iwl_tx_cmd *tx_cmd = - (struct iwl_tx_cmd *) txq->cmd[txq->q.read_ptr]->payload; - - WARN_ON(read_ptr >= TFD_QUEUE_SIZE_MAX); - - if (txq_id != trans_pcie->cmd_queue) - sta_id = tx_cmd->sta_id; - - bc_ent = cpu_to_le16(1 | (sta_id << 12)); - scd_bc_tbl[txq_id].tfd_offset[read_ptr] = bc_ent; - - if (read_ptr < TFD_QUEUE_SIZE_BC_DUP) - scd_bc_tbl[txq_id]. - tfd_offset[TFD_QUEUE_SIZE_MAX + read_ptr] = bc_ent; -} - -static int iwlagn_tx_queue_set_q2ratid(struct iwl_trans *trans, u16 ra_tid, - u16 txq_id) -{ - u32 tbl_dw_addr; - u32 tbl_dw; - u16 scd_q2ratid; - - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - scd_q2ratid = ra_tid & SCD_QUEUE_RA_TID_MAP_RATID_MSK; - - tbl_dw_addr = trans_pcie->scd_base_addr + - SCD_TRANS_TBL_OFFSET_QUEUE(txq_id); - - tbl_dw = iwl_read_targ_mem(trans, tbl_dw_addr); - - if (txq_id & 0x1) - tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); - else - tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); - - iwl_write_targ_mem(trans, tbl_dw_addr, tbl_dw); - - return 0; -} - -static void iwlagn_tx_queue_stop_scheduler(struct iwl_trans *trans, u16 txq_id) -{ - /* Simply stop the queue, but don't change any configuration; - * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */ - iwl_write_prph(trans, - SCD_QUEUE_STATUS_BITS(txq_id), - (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)| - (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN)); -} - -void iwl_trans_set_wr_ptrs(struct iwl_trans *trans, - int txq_id, u32 index) -{ - IWL_DEBUG_TX_QUEUES(trans, "Q %d WrPtr: %d", txq_id, index & 0xff); - iwl_write_direct32(trans, HBUS_TARG_WRPTR, - (index & 0xff) | (txq_id << 8)); - iwl_write_prph(trans, SCD_QUEUE_RDPTR(txq_id), index); -} - -void iwl_trans_tx_queue_set_status(struct iwl_trans *trans, - struct iwl_tx_queue *txq, - int tx_fifo_id, int scd_retry) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int txq_id = txq->q.id; - int active = - test_bit(txq_id, &trans_pcie->txq_ctx_active_msk) ? 1 : 0; - - iwl_write_prph(trans, SCD_QUEUE_STATUS_BITS(txq_id), - (active << SCD_QUEUE_STTS_REG_POS_ACTIVE) | - (tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) | - (1 << SCD_QUEUE_STTS_REG_POS_WSL) | - SCD_QUEUE_STTS_REG_MSK); - - txq->sched_retry = scd_retry; - - if (active) - IWL_DEBUG_TX_QUEUES(trans, "Activate %s Queue %d on FIFO %d\n", - scd_retry ? "BA" : "AC/CMD", txq_id, tx_fifo_id); - else - IWL_DEBUG_TX_QUEUES(trans, "Deactivate %s Queue %d\n", - scd_retry ? "BA" : "AC/CMD", txq_id); -} - -static inline int get_ac_from_tid(u16 tid) -{ - if (likely(tid < ARRAY_SIZE(tid_to_ac))) - return tid_to_ac[tid]; - - /* no support for TIDs 8-15 yet */ - return -EINVAL; -} - -static inline int get_fifo_from_tid(struct iwl_trans_pcie *trans_pcie, - u8 ctx, u16 tid) -{ - const u8 *ac_to_fifo = trans_pcie->ac_to_fifo[ctx]; - if (likely(tid < ARRAY_SIZE(tid_to_ac))) - return ac_to_fifo[tid_to_ac[tid]]; - - /* no support for TIDs 8-15 yet */ - return -EINVAL; -} - -static inline bool is_agg_txqid_valid(struct iwl_trans *trans, int txq_id) -{ - if (txq_id < IWLAGN_FIRST_AMPDU_QUEUE) - return false; - return txq_id < (IWLAGN_FIRST_AMPDU_QUEUE + - hw_params(trans).num_ampdu_queues); -} - -void iwl_trans_pcie_tx_agg_setup(struct iwl_trans *trans, - enum iwl_rxon_context_id ctx, int sta_id, - int tid, int frame_limit, u16 ssn) -{ - int tx_fifo, txq_id; - u16 ra_tid; - unsigned long flags; - - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - if (WARN_ON(sta_id == IWL_INVALID_STATION)) - return; - if (WARN_ON(tid >= IWL_MAX_TID_COUNT)) - return; - - tx_fifo = get_fifo_from_tid(trans_pcie, ctx, tid); - if (WARN_ON(tx_fifo < 0)) { - IWL_ERR(trans, "txq_agg_setup, bad fifo: %d\n", tx_fifo); - return; - } - - txq_id = trans_pcie->agg_txq[sta_id][tid]; - if (WARN_ON_ONCE(!is_agg_txqid_valid(trans, txq_id))) { - IWL_ERR(trans, - "queue number out of range: %d, must be %d to %d\n", - txq_id, IWLAGN_FIRST_AMPDU_QUEUE, - IWLAGN_FIRST_AMPDU_QUEUE + - hw_params(trans).num_ampdu_queues - 1); - return; - } - - ra_tid = BUILD_RAxTID(sta_id, tid); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Stop this Tx queue before configuring it */ - iwlagn_tx_queue_stop_scheduler(trans, txq_id); - - /* Map receiver-address / traffic-ID to this queue */ - iwlagn_tx_queue_set_q2ratid(trans, ra_tid, txq_id); - - /* Set this queue as a chain-building queue */ - iwl_set_bits_prph(trans, SCD_QUEUECHAIN_SEL, (1<<txq_id)); - - /* enable aggregations for the queue */ - iwl_set_bits_prph(trans, SCD_AGGR_SEL, (1<<txq_id)); - - /* Place first TFD at index corresponding to start sequence number. - * Assumes that ssn_idx is valid (!= 0xFFF) */ - trans_pcie->txq[txq_id].q.read_ptr = (ssn & 0xff); - trans_pcie->txq[txq_id].q.write_ptr = (ssn & 0xff); - iwl_trans_set_wr_ptrs(trans, txq_id, ssn); - - /* Set up Tx window size and frame limit for this queue */ - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(txq_id) + - sizeof(u32), - ((frame_limit << - SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) | - ((frame_limit << - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK)); - - iwl_set_bits_prph(trans, SCD_INTERRUPT_MASK, (1 << txq_id)); - - /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */ - iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[txq_id], - tx_fifo, 1); - - trans_pcie->txq[txq_id].sta_id = sta_id; - trans_pcie->txq[txq_id].tid = tid; - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); -} - -/* - * Find first available (lowest unused) Tx Queue, mark it "active". - * Called only when finding queue for aggregation. - * Should never return anything < 7, because they should already - * be in use as EDCA AC (0-3), Command (4), reserved (5, 6) - */ -static int iwlagn_txq_ctx_activate_free(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int txq_id; - - for (txq_id = 0; txq_id < cfg(trans)->base_params->num_of_queues; - txq_id++) - if (!test_and_set_bit(txq_id, - &trans_pcie->txq_ctx_active_msk)) - return txq_id; - return -1; -} - -int iwl_trans_pcie_tx_agg_alloc(struct iwl_trans *trans, - int sta_id, int tid) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int txq_id; - - txq_id = iwlagn_txq_ctx_activate_free(trans); - if (txq_id == -1) { - IWL_ERR(trans, "No free aggregation queue available\n"); - return -ENXIO; - } - - trans_pcie->agg_txq[sta_id][tid] = txq_id; - iwl_set_swq_id(&trans_pcie->txq[txq_id], get_ac_from_tid(tid), txq_id); - - return 0; -} - -int iwl_trans_pcie_tx_agg_disable(struct iwl_trans *trans, int sta_id, int tid) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u8 txq_id = trans_pcie->agg_txq[sta_id][tid]; - - if (WARN_ON_ONCE(!is_agg_txqid_valid(trans, txq_id))) { - IWL_ERR(trans, - "queue number out of range: %d, must be %d to %d\n", - txq_id, IWLAGN_FIRST_AMPDU_QUEUE, - IWLAGN_FIRST_AMPDU_QUEUE + - hw_params(trans).num_ampdu_queues - 1); - return -EINVAL; - } - - iwlagn_tx_queue_stop_scheduler(trans, txq_id); - - iwl_clear_bits_prph(trans, SCD_AGGR_SEL, (1 << txq_id)); - - trans_pcie->agg_txq[sta_id][tid] = 0; - trans_pcie->txq[txq_id].q.read_ptr = 0; - trans_pcie->txq[txq_id].q.write_ptr = 0; - /* supposes that ssn_idx is valid (!= 0xFFF) */ - iwl_trans_set_wr_ptrs(trans, txq_id, 0); - - iwl_clear_bits_prph(trans, SCD_INTERRUPT_MASK, (1 << txq_id)); - iwl_txq_ctx_deactivate(trans_pcie, txq_id); - iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[txq_id], 0, 0); - return 0; -} - -/*************** HOST COMMAND QUEUE FUNCTIONS *****/ - -/** - * iwl_enqueue_hcmd - enqueue a uCode command - * @priv: device private data point - * @cmd: a point to the ucode command structure - * - * The function returns < 0 values to indicate the operation is - * failed. On success, it turns the index (> 0) of command in the - * command queue. - */ -static int iwl_enqueue_hcmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[trans_pcie->cmd_queue]; - struct iwl_queue *q = &txq->q; - struct iwl_device_cmd *out_cmd; - struct iwl_cmd_meta *out_meta; - dma_addr_t phys_addr; - u32 idx; - u16 copy_size, cmd_size; - bool had_nocopy = false; - int i; - u8 *cmd_dest; -#ifdef CONFIG_IWLWIFI_DEVICE_TRACING - const void *trace_bufs[IWL_MAX_CMD_TFDS + 1] = {}; - int trace_lens[IWL_MAX_CMD_TFDS + 1] = {}; - int trace_idx; -#endif - - if (test_bit(STATUS_FW_ERROR, &trans->shrd->status)) { - IWL_WARN(trans, "fw recovery, no hcmd send\n"); - return -EIO; - } - - copy_size = sizeof(out_cmd->hdr); - cmd_size = sizeof(out_cmd->hdr); - - /* need one for the header if the first is NOCOPY */ - BUILD_BUG_ON(IWL_MAX_CMD_TFDS > IWL_NUM_OF_TBS - 1); - - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { - if (!cmd->len[i]) - continue; - if (cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY) { - had_nocopy = true; - } else { - /* NOCOPY must not be followed by normal! */ - if (WARN_ON(had_nocopy)) - return -EINVAL; - copy_size += cmd->len[i]; - } - cmd_size += cmd->len[i]; - } - - /* - * If any of the command structures end up being larger than - * the TFD_MAX_PAYLOAD_SIZE and they aren't dynamically - * allocated into separate TFDs, then we will need to - * increase the size of the buffers. - */ - if (WARN_ON(copy_size > TFD_MAX_PAYLOAD_SIZE)) - return -EINVAL; - - spin_lock_bh(&txq->lock); - - if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) { - spin_unlock_bh(&txq->lock); - - IWL_ERR(trans, "No space in command queue\n"); - iwl_op_mode_cmd_queue_full(trans->op_mode); - return -ENOSPC; - } - - idx = get_cmd_index(q, q->write_ptr); - out_cmd = txq->cmd[idx]; - out_meta = &txq->meta[idx]; - - memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */ - if (cmd->flags & CMD_WANT_SKB) - out_meta->source = cmd; - - /* set up the header */ - - out_cmd->hdr.cmd = cmd->id; - out_cmd->hdr.flags = 0; - out_cmd->hdr.sequence = - cpu_to_le16(QUEUE_TO_SEQ(trans_pcie->cmd_queue) | - INDEX_TO_SEQ(q->write_ptr)); - - /* and copy the data that needs to be copied */ - - cmd_dest = out_cmd->payload; - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { - if (!cmd->len[i]) - continue; - if (cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY) - break; - memcpy(cmd_dest, cmd->data[i], cmd->len[i]); - cmd_dest += cmd->len[i]; - } - - IWL_DEBUG_HC(trans, "Sending command %s (#%x), seq: 0x%04X, " - "%d bytes at %d[%d]:%d\n", - get_cmd_string(out_cmd->hdr.cmd), - out_cmd->hdr.cmd, - le16_to_cpu(out_cmd->hdr.sequence), cmd_size, - q->write_ptr, idx, trans_pcie->cmd_queue); - - phys_addr = dma_map_single(trans->dev, &out_cmd->hdr, copy_size, - DMA_BIDIRECTIONAL); - if (unlikely(dma_mapping_error(trans->dev, phys_addr))) { - idx = -ENOMEM; - goto out; - } - - dma_unmap_addr_set(out_meta, mapping, phys_addr); - dma_unmap_len_set(out_meta, len, copy_size); - - iwlagn_txq_attach_buf_to_tfd(trans, txq, - phys_addr, copy_size, 1); -#ifdef CONFIG_IWLWIFI_DEVICE_TRACING - trace_bufs[0] = &out_cmd->hdr; - trace_lens[0] = copy_size; - trace_idx = 1; -#endif - - for (i = 0; i < IWL_MAX_CMD_TFDS; i++) { - if (!cmd->len[i]) - continue; - if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY)) - continue; - phys_addr = dma_map_single(trans->dev, - (void *)cmd->data[i], - cmd->len[i], DMA_BIDIRECTIONAL); - if (dma_mapping_error(trans->dev, phys_addr)) { - iwlagn_unmap_tfd(trans, out_meta, - &txq->tfds[q->write_ptr], - DMA_BIDIRECTIONAL); - idx = -ENOMEM; - goto out; - } - - iwlagn_txq_attach_buf_to_tfd(trans, txq, phys_addr, - cmd->len[i], 0); -#ifdef CONFIG_IWLWIFI_DEVICE_TRACING - trace_bufs[trace_idx] = cmd->data[i]; - trace_lens[trace_idx] = cmd->len[i]; - trace_idx++; -#endif - } - - out_meta->flags = cmd->flags; - - txq->need_update = 1; - - /* check that tracing gets all possible blocks */ - BUILD_BUG_ON(IWL_MAX_CMD_TFDS + 1 != 3); -#ifdef CONFIG_IWLWIFI_DEVICE_TRACING - trace_iwlwifi_dev_hcmd(trans->dev, cmd->flags, - trace_bufs[0], trace_lens[0], - trace_bufs[1], trace_lens[1], - trace_bufs[2], trace_lens[2]); -#endif - - /* Increment and update queue's write index */ - q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); - iwl_txq_update_write_ptr(trans, txq); - - out: - spin_unlock_bh(&txq->lock); - return idx; -} - -/** - * iwl_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd - * - * When FW advances 'R' index, all entries between old and new 'R' index - * need to be reclaimed. As result, some free space forms. If there is - * enough free space (> low mark), wake the stack that feeds us. - */ -static void iwl_hcmd_queue_reclaim(struct iwl_trans *trans, int txq_id, - int idx) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[txq_id]; - struct iwl_queue *q = &txq->q; - int nfreed = 0; - - lockdep_assert_held(&txq->lock); - - if ((idx >= q->n_bd) || (iwl_queue_used(q, idx) == 0)) { - IWL_ERR(trans, "%s: Read index for DMA queue txq id (%d), " - "index %d is out of range [0-%d] %d %d.\n", __func__, - txq_id, idx, q->n_bd, q->write_ptr, q->read_ptr); - return; - } - - for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx; - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { - - if (nfreed++ > 0) { - IWL_ERR(trans, "HCMD skipped: index (%d) %d %d\n", idx, - q->write_ptr, q->read_ptr); - iwl_op_mode_nic_error(trans->op_mode); - } - - } -} - -/** - * iwl_tx_cmd_complete - Pull unused buffers off the queue and reclaim them - * @rxb: Rx buffer to reclaim - * @handler_status: return value of the handler of the command - * (put in setup_rx_handlers) - * - * If an Rx buffer has an async callback associated with it the callback - * will be executed. The attached skb (if present) will only be freed - * if the callback returns 1 - */ -void iwl_tx_cmd_complete(struct iwl_trans *trans, struct iwl_rx_cmd_buffer *rxb, - int handler_status) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - u16 sequence = le16_to_cpu(pkt->hdr.sequence); - int txq_id = SEQ_TO_QUEUE(sequence); - int index = SEQ_TO_INDEX(sequence); - int cmd_index; - struct iwl_device_cmd *cmd; - struct iwl_cmd_meta *meta; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[trans_pcie->cmd_queue]; - - /* If a Tx command is being handled and it isn't in the actual - * command queue then there a command routing bug has been introduced - * in the queue management code. */ - if (WARN(txq_id != trans_pcie->cmd_queue, - "wrong command queue %d (should be %d), sequence 0x%X readp=%d writep=%d\n", - txq_id, trans_pcie->cmd_queue, sequence, - trans_pcie->txq[trans_pcie->cmd_queue].q.read_ptr, - trans_pcie->txq[trans_pcie->cmd_queue].q.write_ptr)) { - iwl_print_hex_error(trans, pkt, 32); - return; - } - - spin_lock(&txq->lock); - - cmd_index = get_cmd_index(&txq->q, index); - cmd = txq->cmd[cmd_index]; - meta = &txq->meta[cmd_index]; - - txq->time_stamp = jiffies; - - iwlagn_unmap_tfd(trans, meta, &txq->tfds[index], - DMA_BIDIRECTIONAL); - - /* Input error checking is done when commands are added to queue. */ - if (meta->flags & CMD_WANT_SKB) { - struct page *p = rxb_steal_page(rxb); - - meta->source->resp_pkt = pkt; - meta->source->_rx_page_addr = (unsigned long)page_address(p); - meta->source->_rx_page_order = hw_params(trans).rx_page_order; - meta->source->handler_status = handler_status; - } - - iwl_hcmd_queue_reclaim(trans, txq_id, index); - - if (!(meta->flags & CMD_ASYNC)) { - if (!test_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status)) { - IWL_WARN(trans, - "HCMD_ACTIVE already clear for command %s\n", - get_cmd_string(cmd->hdr.cmd)); - } - clear_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status); - IWL_DEBUG_INFO(trans, "Clearing HCMD_ACTIVE for command %s\n", - get_cmd_string(cmd->hdr.cmd)); - wake_up(&trans->wait_command_queue); - } - - meta->flags = 0; - - spin_unlock(&txq->lock); -} - -#define HOST_COMPLETE_TIMEOUT (2 * HZ) - -static int iwl_send_cmd_async(struct iwl_trans *trans, struct iwl_host_cmd *cmd) -{ - int ret; - - /* An asynchronous command can not expect an SKB to be set. */ - if (WARN_ON(cmd->flags & CMD_WANT_SKB)) - return -EINVAL; - - - ret = iwl_enqueue_hcmd(trans, cmd); - if (ret < 0) { - IWL_ERR(trans, - "Error sending %s: enqueue_hcmd failed: %d\n", - get_cmd_string(cmd->id), ret); - return ret; - } - return 0; -} - -static int iwl_send_cmd_sync(struct iwl_trans *trans, struct iwl_host_cmd *cmd) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int cmd_idx; - int ret; - - IWL_DEBUG_INFO(trans, "Attempting to send sync command %s\n", - get_cmd_string(cmd->id)); - - if (test_bit(STATUS_FW_ERROR, &trans->shrd->status)) { - IWL_ERR(trans, "Command %s failed: FW Error\n", - get_cmd_string(cmd->id)); - return -EIO; - } - - if (WARN_ON(test_and_set_bit(STATUS_HCMD_ACTIVE, - &trans->shrd->status))) { - IWL_ERR(trans, "Command %s: a command is already active!\n", - get_cmd_string(cmd->id)); - return -EIO; - } - - IWL_DEBUG_INFO(trans, "Setting HCMD_ACTIVE for command %s\n", - get_cmd_string(cmd->id)); - - cmd_idx = iwl_enqueue_hcmd(trans, cmd); - if (cmd_idx < 0) { - ret = cmd_idx; - clear_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status); - IWL_ERR(trans, - "Error sending %s: enqueue_hcmd failed: %d\n", - get_cmd_string(cmd->id), ret); - return ret; - } - - ret = wait_event_timeout(trans->wait_command_queue, - !test_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status), - HOST_COMPLETE_TIMEOUT); - if (!ret) { - if (test_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status)) { - struct iwl_tx_queue *txq = - &trans_pcie->txq[trans_pcie->cmd_queue]; - struct iwl_queue *q = &txq->q; - - IWL_ERR(trans, - "Error sending %s: time out after %dms.\n", - get_cmd_string(cmd->id), - jiffies_to_msecs(HOST_COMPLETE_TIMEOUT)); - - IWL_ERR(trans, - "Current CMD queue read_ptr %d write_ptr %d\n", - q->read_ptr, q->write_ptr); - - clear_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status); - IWL_DEBUG_INFO(trans, "Clearing HCMD_ACTIVE for command" - "%s\n", get_cmd_string(cmd->id)); - ret = -ETIMEDOUT; - goto cancel; - } - } - - if ((cmd->flags & CMD_WANT_SKB) && !cmd->resp_pkt) { - IWL_ERR(trans, "Error: Response NULL in '%s'\n", - get_cmd_string(cmd->id)); - ret = -EIO; - goto cancel; - } - - return 0; - -cancel: - if (cmd->flags & CMD_WANT_SKB) { - /* - * Cancel the CMD_WANT_SKB flag for the cmd in the - * TX cmd queue. Otherwise in case the cmd comes - * in later, it will possibly set an invalid - * address (cmd->meta.source). - */ - trans_pcie->txq[trans_pcie->cmd_queue].meta[cmd_idx].flags &= - ~CMD_WANT_SKB; - } - - if (cmd->resp_pkt) { - iwl_free_resp(cmd); - cmd->resp_pkt = NULL; - } - - return ret; -} - -int iwl_trans_pcie_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd) -{ - if (cmd->flags & CMD_ASYNC) - return iwl_send_cmd_async(trans, cmd); - - return iwl_send_cmd_sync(trans, cmd); -} - -/* Frees buffers until index _not_ inclusive */ -int iwl_tx_queue_reclaim(struct iwl_trans *trans, int txq_id, int index, - struct sk_buff_head *skbs) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[txq_id]; - struct iwl_queue *q = &txq->q; - int last_to_free; - int freed = 0; - - /* This function is not meant to release cmd queue*/ - if (WARN_ON(txq_id == trans_pcie->cmd_queue)) - return 0; - - lockdep_assert_held(&txq->lock); - - /*Since we free until index _not_ inclusive, the one before index is - * the last we will free. This one must be used */ - last_to_free = iwl_queue_dec_wrap(index, q->n_bd); - - if ((index >= q->n_bd) || - (iwl_queue_used(q, last_to_free) == 0)) { - IWL_ERR(trans, "%s: Read index for DMA queue txq id (%d), " - "last_to_free %d is out of range [0-%d] %d %d.\n", - __func__, txq_id, last_to_free, q->n_bd, - q->write_ptr, q->read_ptr); - return 0; - } - - if (WARN_ON(!skb_queue_empty(skbs))) - return 0; - - for (; - q->read_ptr != index; - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) { - - if (WARN_ON_ONCE(txq->skbs[txq->q.read_ptr] == NULL)) - continue; - - __skb_queue_tail(skbs, txq->skbs[txq->q.read_ptr]); - - txq->skbs[txq->q.read_ptr] = NULL; - - iwlagn_txq_inval_byte_cnt_tbl(trans, txq); - - iwlagn_txq_free_tfd(trans, txq, DMA_TO_DEVICE); - freed++; - } - return freed; -} diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c deleted file mode 100644 index 8741048e..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ /dev/null @@ -1,2348 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#include <linux/pci.h> -#include <linux/pci-aspm.h> -#include <linux/interrupt.h> -#include <linux/debugfs.h> -#include <linux/sched.h> -#include <linux/bitops.h> -#include <linux/gfp.h> - -#include "iwl-trans.h" -#include "iwl-trans-pcie-int.h" -#include "iwl-csr.h" -#include "iwl-prph.h" -#include "iwl-shared.h" -#include "iwl-eeprom.h" -#include "iwl-agn-hw.h" - -#define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo)))) - -#define SCD_QUEUECHAIN_SEL_ALL(trans, trans_pcie) \ - (((1<<cfg(trans)->base_params->num_of_queues) - 1) &\ - (~(1<<(trans_pcie)->cmd_queue))) - -static int iwl_trans_rx_alloc(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - struct device *dev = trans->dev; - - memset(&trans_pcie->rxq, 0, sizeof(trans_pcie->rxq)); - - spin_lock_init(&rxq->lock); - - if (WARN_ON(rxq->bd || rxq->rb_stts)) - return -EINVAL; - - /* Allocate the circular buffer of Read Buffer Descriptors (RBDs) */ - rxq->bd = dma_zalloc_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE, - &rxq->bd_dma, GFP_KERNEL); - if (!rxq->bd) - goto err_bd; - - /*Allocate the driver's pointer to receive buffer status */ - rxq->rb_stts = dma_zalloc_coherent(dev, sizeof(*rxq->rb_stts), - &rxq->rb_stts_dma, GFP_KERNEL); - if (!rxq->rb_stts) - goto err_rb_stts; - - return 0; - -err_rb_stts: - dma_free_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE, - rxq->bd, rxq->bd_dma); - memset(&rxq->bd_dma, 0, sizeof(rxq->bd_dma)); - rxq->bd = NULL; -err_bd: - return -ENOMEM; -} - -static void iwl_trans_rxq_free_rx_bufs(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - int i; - - /* Fill the rx_used queue with _all_ of the Rx buffers */ - for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { - /* In the reset function, these buffers may have been allocated - * to an SKB, so we need to unmap and free potential storage */ - if (rxq->pool[i].page != NULL) { - dma_unmap_page(trans->dev, rxq->pool[i].page_dma, - PAGE_SIZE << hw_params(trans).rx_page_order, - DMA_FROM_DEVICE); - __free_pages(rxq->pool[i].page, - hw_params(trans).rx_page_order); - rxq->pool[i].page = NULL; - } - list_add_tail(&rxq->pool[i].list, &rxq->rx_used); - } -} - -static void iwl_trans_rx_hw_init(struct iwl_trans *trans, - struct iwl_rx_queue *rxq) -{ - u32 rb_size; - const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ - u32 rb_timeout = RX_RB_TIMEOUT; /* FIXME: RX_RB_TIMEOUT for all devices? */ - - if (iwlagn_mod_params.amsdu_size_8K) - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; - else - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; - - /* Stop Rx DMA */ - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - - /* Reset driver's Rx queue write index */ - iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); - - /* Tell device where to find RBD circular buffer in DRAM */ - iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_BASE_REG, - (u32)(rxq->bd_dma >> 8)); - - /* Tell device where in DRAM to update its Rx status */ - iwl_write_direct32(trans, FH_RSCSR_CHNL0_STTS_WPTR_REG, - rxq->rb_stts_dma >> 4); - - /* Enable Rx DMA - * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in - * the credit mechanism in 5000 HW RX FIFO - * Direct rx interrupts to hosts - * Rx buffer size 4 or 8k - * RB timeout 0x10 - * 256 RBDs - */ - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | - rb_size| - (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| - (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); - - /* Set interrupt coalescing timer to default (2048 usecs) */ - iwl_write8(trans, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); -} - -static int iwl_rx_init(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - - int i, err; - unsigned long flags; - - if (!rxq->bd) { - err = iwl_trans_rx_alloc(trans); - if (err) - return err; - } - - spin_lock_irqsave(&rxq->lock, flags); - INIT_LIST_HEAD(&rxq->rx_free); - INIT_LIST_HEAD(&rxq->rx_used); - - iwl_trans_rxq_free_rx_bufs(trans); - - for (i = 0; i < RX_QUEUE_SIZE; i++) - rxq->queue[i] = NULL; - - /* Set us so that we have processed and used all buffers, but have - * not restocked the Rx queue with fresh buffers */ - rxq->read = rxq->write = 0; - rxq->write_actual = 0; - rxq->free_count = 0; - spin_unlock_irqrestore(&rxq->lock, flags); - - iwlagn_rx_replenish(trans); - - iwl_trans_rx_hw_init(trans, rxq); - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - rxq->need_update = 1; - iwl_rx_queue_update_write_ptr(trans, rxq); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - return 0; -} - -static void iwl_trans_pcie_rx_free(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - - unsigned long flags; - - /*if rxq->bd is NULL, it means that nothing has been allocated, - * exit now */ - if (!rxq->bd) { - IWL_DEBUG_INFO(trans, "Free NULL rx context\n"); - return; - } - - spin_lock_irqsave(&rxq->lock, flags); - iwl_trans_rxq_free_rx_bufs(trans); - spin_unlock_irqrestore(&rxq->lock, flags); - - dma_free_coherent(trans->dev, sizeof(__le32) * RX_QUEUE_SIZE, - rxq->bd, rxq->bd_dma); - memset(&rxq->bd_dma, 0, sizeof(rxq->bd_dma)); - rxq->bd = NULL; - - if (rxq->rb_stts) - dma_free_coherent(trans->dev, - sizeof(struct iwl_rb_status), - rxq->rb_stts, rxq->rb_stts_dma); - else - IWL_DEBUG_INFO(trans, "Free rxq->rb_stts which is NULL\n"); - memset(&rxq->rb_stts_dma, 0, sizeof(rxq->rb_stts_dma)); - rxq->rb_stts = NULL; -} - -static int iwl_trans_rx_stop(struct iwl_trans *trans) -{ - - /* stop Rx DMA */ - iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - return iwl_poll_direct_bit(trans, FH_MEM_RSSR_RX_STATUS_REG, - FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); -} - -static inline int iwlagn_alloc_dma_ptr(struct iwl_trans *trans, - struct iwl_dma_ptr *ptr, size_t size) -{ - if (WARN_ON(ptr->addr)) - return -EINVAL; - - ptr->addr = dma_alloc_coherent(trans->dev, size, - &ptr->dma, GFP_KERNEL); - if (!ptr->addr) - return -ENOMEM; - ptr->size = size; - return 0; -} - -static inline void iwlagn_free_dma_ptr(struct iwl_trans *trans, - struct iwl_dma_ptr *ptr) -{ - if (unlikely(!ptr->addr)) - return; - - dma_free_coherent(trans->dev, ptr->size, ptr->addr, ptr->dma); - memset(ptr, 0, sizeof(*ptr)); -} - -static int iwl_trans_txq_alloc(struct iwl_trans *trans, - struct iwl_tx_queue *txq, int slots_num, - u32 txq_id) -{ - size_t tfd_sz = sizeof(struct iwl_tfd) * TFD_QUEUE_SIZE_MAX; - int i; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - if (WARN_ON(txq->meta || txq->cmd || txq->skbs || txq->tfds)) - return -EINVAL; - - txq->q.n_window = slots_num; - - txq->meta = kcalloc(slots_num, sizeof(txq->meta[0]), GFP_KERNEL); - txq->cmd = kcalloc(slots_num, sizeof(txq->cmd[0]), GFP_KERNEL); - - if (!txq->meta || !txq->cmd) - goto error; - - if (txq_id == trans_pcie->cmd_queue) - for (i = 0; i < slots_num; i++) { - txq->cmd[i] = kmalloc(sizeof(struct iwl_device_cmd), - GFP_KERNEL); - if (!txq->cmd[i]) - goto error; - } - - /* Alloc driver data array and TFD circular buffer */ - /* Driver private data, only for Tx (not command) queues, - * not shared with device. */ - if (txq_id != trans_pcie->cmd_queue) { - txq->skbs = kcalloc(TFD_QUEUE_SIZE_MAX, sizeof(txq->skbs[0]), - GFP_KERNEL); - if (!txq->skbs) { - IWL_ERR(trans, "kmalloc for auxiliary BD " - "structures failed\n"); - goto error; - } - } else { - txq->skbs = NULL; - } - - /* Circular buffer of transmit frame descriptors (TFDs), - * shared with device */ - txq->tfds = dma_alloc_coherent(trans->dev, tfd_sz, - &txq->q.dma_addr, GFP_KERNEL); - if (!txq->tfds) { - IWL_ERR(trans, "dma_alloc_coherent(%zd) failed\n", tfd_sz); - goto error; - } - txq->q.id = txq_id; - - return 0; -error: - kfree(txq->skbs); - txq->skbs = NULL; - /* since txq->cmd has been zeroed, - * all non allocated cmd[i] will be NULL */ - if (txq->cmd && txq_id == trans_pcie->cmd_queue) - for (i = 0; i < slots_num; i++) - kfree(txq->cmd[i]); - kfree(txq->meta); - kfree(txq->cmd); - txq->meta = NULL; - txq->cmd = NULL; - - return -ENOMEM; - -} - -static int iwl_trans_txq_init(struct iwl_trans *trans, struct iwl_tx_queue *txq, - int slots_num, u32 txq_id) -{ - int ret; - - txq->need_update = 0; - memset(txq->meta, 0, sizeof(txq->meta[0]) * slots_num); - - /* - * For the default queues 0-3, set up the swq_id - * already -- all others need to get one later - * (if they need one at all). - */ - if (txq_id < 4) - iwl_set_swq_id(txq, txq_id, txq_id); - - /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise - * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */ - BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1)); - - /* Initialize queue's high/low-water marks, and head/tail indexes */ - ret = iwl_queue_init(&txq->q, TFD_QUEUE_SIZE_MAX, slots_num, - txq_id); - if (ret) - return ret; - - spin_lock_init(&txq->lock); - - /* - * Tell nic where to find circular buffer of Tx Frame Descriptors for - * given Tx queue, and enable the DMA channel used for that queue. - * Circular buffer (TFD queue in DRAM) physical base address */ - iwl_write_direct32(trans, FH_MEM_CBBC_QUEUE(txq_id), - txq->q.dma_addr >> 8); - - return 0; -} - -/** - * iwl_tx_queue_unmap - Unmap any remaining DMA mappings and free skb's - */ -static void iwl_tx_queue_unmap(struct iwl_trans *trans, int txq_id) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[txq_id]; - struct iwl_queue *q = &txq->q; - enum dma_data_direction dma_dir; - - if (!q->n_bd) - return; - - /* In the command queue, all the TBs are mapped as BIDI - * so unmap them as such. - */ - if (txq_id == trans_pcie->cmd_queue) - dma_dir = DMA_BIDIRECTIONAL; - else - dma_dir = DMA_TO_DEVICE; - - spin_lock_bh(&txq->lock); - while (q->write_ptr != q->read_ptr) { - iwlagn_txq_free_tfd(trans, txq, dma_dir); - q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd); - } - spin_unlock_bh(&txq->lock); -} - -/** - * iwl_tx_queue_free - Deallocate DMA queue. - * @txq: Transmit queue to deallocate. - * - * Empty queue by removing and destroying all BD's. - * Free all buffers. - * 0-fill, but do not free "txq" descriptor structure. - */ -static void iwl_tx_queue_free(struct iwl_trans *trans, int txq_id) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[txq_id]; - struct device *dev = trans->dev; - int i; - if (WARN_ON(!txq)) - return; - - iwl_tx_queue_unmap(trans, txq_id); - - /* De-alloc array of command/tx buffers */ - - if (txq_id == trans_pcie->cmd_queue) - for (i = 0; i < txq->q.n_window; i++) - kfree(txq->cmd[i]); - - /* De-alloc circular buffer of TFDs */ - if (txq->q.n_bd) { - dma_free_coherent(dev, sizeof(struct iwl_tfd) * - txq->q.n_bd, txq->tfds, txq->q.dma_addr); - memset(&txq->q.dma_addr, 0, sizeof(txq->q.dma_addr)); - } - - /* De-alloc array of per-TFD driver data */ - kfree(txq->skbs); - txq->skbs = NULL; - - /* deallocate arrays */ - kfree(txq->cmd); - kfree(txq->meta); - txq->cmd = NULL; - txq->meta = NULL; - - /* 0-fill queue descriptor structure */ - memset(txq, 0, sizeof(*txq)); -} - -/** - * iwl_trans_tx_free - Free TXQ Context - * - * Destroy all TX DMA queues and structures - */ -static void iwl_trans_pcie_tx_free(struct iwl_trans *trans) -{ - int txq_id; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - /* Tx queues */ - if (trans_pcie->txq) { - for (txq_id = 0; - txq_id < cfg(trans)->base_params->num_of_queues; txq_id++) - iwl_tx_queue_free(trans, txq_id); - } - - kfree(trans_pcie->txq); - trans_pcie->txq = NULL; - - iwlagn_free_dma_ptr(trans, &trans_pcie->kw); - - iwlagn_free_dma_ptr(trans, &trans_pcie->scd_bc_tbls); -} - -/** - * iwl_trans_tx_alloc - allocate TX context - * Allocate all Tx DMA structures and initialize them - * - * @param priv - * @return error code - */ -static int iwl_trans_tx_alloc(struct iwl_trans *trans) -{ - int ret; - int txq_id, slots_num; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - u16 scd_bc_tbls_size = cfg(trans)->base_params->num_of_queues * - sizeof(struct iwlagn_scd_bc_tbl); - - /*It is not allowed to alloc twice, so warn when this happens. - * We cannot rely on the previous allocation, so free and fail */ - if (WARN_ON(trans_pcie->txq)) { - ret = -EINVAL; - goto error; - } - - ret = iwlagn_alloc_dma_ptr(trans, &trans_pcie->scd_bc_tbls, - scd_bc_tbls_size); - if (ret) { - IWL_ERR(trans, "Scheduler BC Table allocation failed\n"); - goto error; - } - - /* Alloc keep-warm buffer */ - ret = iwlagn_alloc_dma_ptr(trans, &trans_pcie->kw, IWL_KW_SIZE); - if (ret) { - IWL_ERR(trans, "Keep Warm allocation failed\n"); - goto error; - } - - trans_pcie->txq = kcalloc(cfg(trans)->base_params->num_of_queues, - sizeof(struct iwl_tx_queue), GFP_KERNEL); - if (!trans_pcie->txq) { - IWL_ERR(trans, "Not enough memory for txq\n"); - ret = ENOMEM; - goto error; - } - - /* Alloc and init all Tx queues, including the command queue (#4/#9) */ - for (txq_id = 0; txq_id < cfg(trans)->base_params->num_of_queues; - txq_id++) { - slots_num = (txq_id == trans_pcie->cmd_queue) ? - TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; - ret = iwl_trans_txq_alloc(trans, &trans_pcie->txq[txq_id], - slots_num, txq_id); - if (ret) { - IWL_ERR(trans, "Tx %d queue alloc failed\n", txq_id); - goto error; - } - } - - return 0; - -error: - iwl_trans_pcie_tx_free(trans); - - return ret; -} -static int iwl_tx_init(struct iwl_trans *trans) -{ - int ret; - int txq_id, slots_num; - unsigned long flags; - bool alloc = false; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - if (!trans_pcie->txq) { - ret = iwl_trans_tx_alloc(trans); - if (ret) - goto error; - alloc = true; - } - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - /* Turn off all Tx DMA fifos */ - iwl_write_prph(trans, SCD_TXFACT, 0); - - /* Tell NIC where to find the "keep warm" buffer */ - iwl_write_direct32(trans, FH_KW_MEM_ADDR_REG, - trans_pcie->kw.dma >> 4); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - /* Alloc and init all Tx queues, including the command queue (#4/#9) */ - for (txq_id = 0; txq_id < cfg(trans)->base_params->num_of_queues; - txq_id++) { - slots_num = (txq_id == trans_pcie->cmd_queue) ? - TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; - ret = iwl_trans_txq_init(trans, &trans_pcie->txq[txq_id], - slots_num, txq_id); - if (ret) { - IWL_ERR(trans, "Tx %d queue init failed\n", txq_id); - goto error; - } - } - - return 0; -error: - /*Upon error, free only if we allocated something */ - if (alloc) - iwl_trans_pcie_tx_free(trans); - return ret; -} - -static void iwl_set_pwr_vmain(struct iwl_trans *trans) -{ -/* - * (for documentation purposes) - * to set power to V_AUX, do: - - if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) - iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - */ - - iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); -} - -/* PCI registers */ -#define PCI_CFG_RETRY_TIMEOUT 0x041 -#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01 -#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02 - -static u16 iwl_pciexp_link_ctrl(struct iwl_trans *trans) -{ - int pos; - u16 pci_lnk_ctl; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - struct pci_dev *pci_dev = trans_pcie->pci_dev; - - pos = pci_pcie_cap(pci_dev); - pci_read_config_word(pci_dev, pos + PCI_EXP_LNKCTL, &pci_lnk_ctl); - return pci_lnk_ctl; -} - -static void iwl_apm_config(struct iwl_trans *trans) -{ - /* - * HW bug W/A for instability in PCIe bus L0S->L1 transition. - * Check if BIOS (or OS) enabled L1-ASPM on this device. - * If so (likely), disable L0S, so device moves directly L0->L1; - * costs negligible amount of power savings. - * If not (unlikely), enable L0S, so there is at least some - * power savings, even without L1. - */ - u16 lctl = iwl_pciexp_link_ctrl(trans); - - if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == - PCI_CFG_LINK_CTRL_VAL_L1_EN) { - /* L1-ASPM enabled; disable(!) L0S */ - iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - dev_printk(KERN_INFO, trans->dev, - "L1 Enabled; Disabling L0S\n"); - } else { - /* L1-ASPM disabled; enable(!) L0S */ - iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED); - dev_printk(KERN_INFO, trans->dev, - "L1 Disabled; Enabling L0S\n"); - } - trans->pm_support = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN); -} - -/* - * Start up NIC's basic functionality after it has been reset - * (e.g. after platform boot, or shutdown via iwl_apm_stop()) - * NOTE: This does not load uCode nor start the embedded processor - */ -static int iwl_apm_init(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int ret = 0; - IWL_DEBUG_INFO(trans, "Init card's basic functions\n"); - - /* - * Use "set_bit" below rather than "write", to preserve any hardware - * bits already set by default after reset. - */ - - /* Disable L0S exit timer (platform NMI Work/Around) */ - iwl_set_bit(trans, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - /* - * Disable L0s without affecting L1; - * don't wait for ICH L0s (ICH bug W/A) - */ - iwl_set_bit(trans, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); - - /* Set FH wait threshold to maximum (HW error during stress W/A) */ - iwl_set_bit(trans, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); - - /* - * Enable HAP INTA (interrupt from management bus) to - * wake device's PCI Express link L1a -> L0s - */ - iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); - - iwl_apm_config(trans); - - /* Configure analog phase-lock-loop before activating to D0A */ - if (cfg(trans)->base_params->pll_cfg_val) - iwl_set_bit(trans, CSR_ANA_PLL_CFG, - cfg(trans)->base_params->pll_cfg_val); - - /* - * Set "initialization complete" bit to move adapter from - * D0U* --> D0A* (powered-up active) state. - */ - iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - - /* - * Wait for clock stabilization; once stabilized, access to - * device-internal resources is supported, e.g. iwl_write_prph() - * and accesses to uCode SRAM. - */ - ret = iwl_poll_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (ret < 0) { - IWL_DEBUG_INFO(trans, "Failed to init the card\n"); - goto out; - } - - /* - * Enable DMA clock and wait for it to stabilize. - * - * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits - * do not disable clocks. This preserves any hardware bits already - * set by default in "CLK_CTRL_REG" after reset. - */ - iwl_write_prph(trans, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT); - udelay(20); - - /* Disable L1-Active */ - iwl_set_bits_prph(trans, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); - - set_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status); - -out: - return ret; -} - -static int iwl_apm_stop_master(struct iwl_trans *trans) -{ - int ret = 0; - - /* stop device's busmaster DMA activity */ - iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); - - ret = iwl_poll_bit(trans, CSR_RESET, - CSR_RESET_REG_FLAG_MASTER_DISABLED, - CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); - if (ret) - IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n"); - - IWL_DEBUG_INFO(trans, "stop master\n"); - - return ret; -} - -static void iwl_apm_stop(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - IWL_DEBUG_INFO(trans, "Stop card, put in low power state\n"); - - clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status); - - /* Stop device's DMA activity */ - iwl_apm_stop_master(trans); - - /* Reset the entire device */ - iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); - - udelay(10); - - /* - * Clear "initialization complete" bit to move adapter from - * D0A* (powered-up Active) --> D0U* (Uninitialized) state. - */ - iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_INIT_DONE); -} - -static int iwl_nic_init(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - unsigned long flags; - - /* nic_init */ - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwl_apm_init(trans); - - /* Set interrupt coalescing calibration timer to default (512 usecs) */ - iwl_write8(trans, CSR_INT_COALESCING, - IWL_HOST_INT_CALIB_TIMEOUT_DEF); - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - iwl_set_pwr_vmain(trans); - - iwl_op_mode_nic_config(trans->op_mode); - -#ifndef CONFIG_IWLWIFI_IDI - /* Allocate the RX queue, or reset if it is already allocated */ - iwl_rx_init(trans); -#endif - - /* Allocate or reset and init all Tx and Command queues */ - if (iwl_tx_init(trans)) - return -ENOMEM; - - if (cfg(trans)->base_params->shadow_reg_enable) { - /* enable shadow regs in HW */ - iwl_set_bit(trans, CSR_MAC_SHADOW_REG_CTRL, - 0x800FFFFF); - } - - return 0; -} - -#define HW_READY_TIMEOUT (50) - -/* Note: returns poll_bit return value, which is >= 0 if success */ -static int iwl_set_hw_ready(struct iwl_trans *trans) -{ - int ret; - - iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY); - - /* See if we got it */ - ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, - CSR_HW_IF_CONFIG_REG_BIT_NIC_READY, - HW_READY_TIMEOUT); - - IWL_DEBUG_INFO(trans, "hardware%s ready\n", ret < 0 ? " not" : ""); - return ret; -} - -/* Note: returns standard 0/-ERROR code */ -static int iwl_prepare_card_hw(struct iwl_trans *trans) -{ - int ret; - - IWL_DEBUG_INFO(trans, "iwl_trans_prepare_card_hw enter\n"); - - ret = iwl_set_hw_ready(trans); - /* If the card is ready, exit 0 */ - if (ret >= 0) - return 0; - - /* If HW is not ready, prepare the conditions to check again */ - iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG, - CSR_HW_IF_CONFIG_REG_PREPARE); - - ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG, - ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, - CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000); - - if (ret < 0) - return ret; - - /* HW should be ready by now, check again. */ - ret = iwl_set_hw_ready(trans); - if (ret >= 0) - return 0; - return ret; -} - -#define IWL_AC_UNSET -1 - -struct queue_to_fifo_ac { - s8 fifo, ac; -}; - -static const struct queue_to_fifo_ac iwlagn_default_queue_to_tx_fifo[] = { - { IWL_TX_FIFO_VO, IEEE80211_AC_VO, }, - { IWL_TX_FIFO_VI, IEEE80211_AC_VI, }, - { IWL_TX_FIFO_BE, IEEE80211_AC_BE, }, - { IWL_TX_FIFO_BK, IEEE80211_AC_BK, }, - { IWLAGN_CMD_FIFO_NUM, IWL_AC_UNSET, }, - { IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, }, - { IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, }, - { IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, }, - { IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, }, - { IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, }, - { IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, }, -}; - -static const struct queue_to_fifo_ac iwlagn_ipan_queue_to_tx_fifo[] = { - { IWL_TX_FIFO_VO, IEEE80211_AC_VO, }, - { IWL_TX_FIFO_VI, IEEE80211_AC_VI, }, - { IWL_TX_FIFO_BE, IEEE80211_AC_BE, }, - { IWL_TX_FIFO_BK, IEEE80211_AC_BK, }, - { IWL_TX_FIFO_BK_IPAN, IEEE80211_AC_BK, }, - { IWL_TX_FIFO_BE_IPAN, IEEE80211_AC_BE, }, - { IWL_TX_FIFO_VI_IPAN, IEEE80211_AC_VI, }, - { IWL_TX_FIFO_VO_IPAN, IEEE80211_AC_VO, }, - { IWL_TX_FIFO_BE_IPAN, 2, }, - { IWLAGN_CMD_FIFO_NUM, IWL_AC_UNSET, }, - { IWL_TX_FIFO_AUX, IWL_AC_UNSET, }, -}; - -static const u8 iwlagn_bss_ac_to_fifo[] = { - IWL_TX_FIFO_VO, - IWL_TX_FIFO_VI, - IWL_TX_FIFO_BE, - IWL_TX_FIFO_BK, -}; -static const u8 iwlagn_bss_ac_to_queue[] = { - 0, 1, 2, 3, -}; -static const u8 iwlagn_pan_ac_to_fifo[] = { - IWL_TX_FIFO_VO_IPAN, - IWL_TX_FIFO_VI_IPAN, - IWL_TX_FIFO_BE_IPAN, - IWL_TX_FIFO_BK_IPAN, -}; -static const u8 iwlagn_pan_ac_to_queue[] = { - 7, 6, 5, 4, -}; - -/* - * ucode - */ -static int iwl_load_section(struct iwl_trans *trans, u8 section_num, - const struct fw_desc *section) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - dma_addr_t phy_addr = section->p_addr; - u32 byte_cnt = section->len; - u32 dst_addr = section->offset; - int ret; - - trans_pcie->ucode_write_complete = false; - - iwl_write_direct32(trans, - FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL), - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE); - - iwl_write_direct32(trans, - FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL), dst_addr); - - iwl_write_direct32(trans, - FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL), - phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK); - - iwl_write_direct32(trans, - FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), - (iwl_get_dma_hi_addr(phy_addr) - << FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt); - - iwl_write_direct32(trans, - FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL), - 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM | - 1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX | - FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID); - - iwl_write_direct32(trans, - FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL), - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE | - FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD); - - IWL_DEBUG_FW(trans, "[%d] uCode section being loaded...\n", - section_num); - ret = wait_event_timeout(trans_pcie->ucode_write_waitq, - trans_pcie->ucode_write_complete, 5 * HZ); - if (!ret) { - IWL_ERR(trans, "Could not load the [%d] uCode section\n", - section_num); - return -ETIMEDOUT; - } - - return 0; -} - -static int iwl_load_given_ucode(struct iwl_trans *trans, - const struct fw_img *image) -{ - int ret = 0; - int i; - - for (i = 0; i < IWL_UCODE_SECTION_MAX; i++) { - if (!image->sec[i].p_addr) - break; - - ret = iwl_load_section(trans, i, &image->sec[i]); - if (ret) - return ret; - } - - /* Remove all resets to allow NIC to operate */ - iwl_write32(trans, CSR_RESET, 0); - - return 0; -} - -static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, - const struct fw_img *fw) -{ - int ret; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - bool hw_rfkill; - - trans_pcie->ac_to_queue[IWL_RXON_CTX_BSS] = iwlagn_bss_ac_to_queue; - trans_pcie->ac_to_queue[IWL_RXON_CTX_PAN] = iwlagn_pan_ac_to_queue; - - trans_pcie->ac_to_fifo[IWL_RXON_CTX_BSS] = iwlagn_bss_ac_to_fifo; - trans_pcie->ac_to_fifo[IWL_RXON_CTX_PAN] = iwlagn_pan_ac_to_fifo; - - trans_pcie->mcast_queue[IWL_RXON_CTX_BSS] = 0; - trans_pcie->mcast_queue[IWL_RXON_CTX_PAN] = IWL_IPAN_MCAST_QUEUE; - - /* This may fail if AMT took ownership of the device */ - if (iwl_prepare_card_hw(trans)) { - IWL_WARN(trans, "Exit HW not ready\n"); - return -EIO; - } - - /* If platform's RF_KILL switch is NOT set to KILL */ - hw_rfkill = !(iwl_read32(trans, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); - iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - - if (hw_rfkill) { - iwl_enable_rfkill_int(trans); - return -ERFKILL; - } - - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - - ret = iwl_nic_init(trans); - if (ret) { - IWL_ERR(trans, "Unable to init nic\n"); - return ret; - } - - /* make sure rfkill handshake bits are cleared */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, - CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED); - - /* clear (again), then enable host interrupts */ - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - iwl_enable_interrupts(trans); - - /* really make sure rfkill handshake bits are cleared */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL); - - /* Load the given image to the HW */ - return iwl_load_given_ucode(trans, fw); -} - -/* - * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask - * must be called under the irq lock and with MAC access - */ -static void iwl_trans_txq_set_sched(struct iwl_trans *trans, u32 mask) -{ - struct iwl_trans_pcie __maybe_unused *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - lockdep_assert_held(&trans_pcie->irq_lock); - - iwl_write_prph(trans, SCD_TXFACT, mask); -} - -static void iwl_tx_start(struct iwl_trans *trans) -{ - const struct queue_to_fifo_ac *queue_to_fifo; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - u32 a; - unsigned long flags; - int i, chan; - u32 reg_val; - - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - trans_pcie->scd_base_addr = - iwl_read_prph(trans, SCD_SRAM_BASE_ADDR); - a = trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_LOWER_BOUND; - /* reset conext data memory */ - for (; a < trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_UPPER_BOUND; - a += 4) - iwl_write_targ_mem(trans, a, 0); - /* reset tx status memory */ - for (; a < trans_pcie->scd_base_addr + SCD_TX_STTS_MEM_UPPER_BOUND; - a += 4) - iwl_write_targ_mem(trans, a, 0); - for (; a < trans_pcie->scd_base_addr + - SCD_TRANS_TBL_OFFSET_QUEUE( - cfg(trans)->base_params->num_of_queues); - a += 4) - iwl_write_targ_mem(trans, a, 0); - - iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, - trans_pcie->scd_bc_tbls.dma >> 10); - - /* The chain extension of the SCD doesn't work well. This feature is - * enabled by default by the HW, so we need to disable it manually. - */ - iwl_write_prph(trans, SCD_CHAINEXT_EN, 0); - - /* Enable DMA channel */ - for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++) - iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan), - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); - - /* Update FH chicken bits */ - reg_val = iwl_read_direct32(trans, FH_TX_CHICKEN_BITS_REG); - iwl_write_direct32(trans, FH_TX_CHICKEN_BITS_REG, - reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); - - iwl_write_prph(trans, SCD_QUEUECHAIN_SEL, - SCD_QUEUECHAIN_SEL_ALL(trans, trans_pcie)); - iwl_write_prph(trans, SCD_AGGR_SEL, 0); - - /* initiate the queues */ - for (i = 0; i < cfg(trans)->base_params->num_of_queues; i++) { - iwl_write_prph(trans, SCD_QUEUE_RDPTR(i), 0); - iwl_write_direct32(trans, HBUS_TARG_WRPTR, 0 | (i << 8)); - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i), 0); - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + - SCD_CONTEXT_QUEUE_OFFSET(i) + - sizeof(u32), - ((SCD_WIN_SIZE << - SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) & - SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) | - ((SCD_FRAME_LIMIT << - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) & - SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK)); - } - - iwl_write_prph(trans, SCD_INTERRUPT_MASK, - IWL_MASK(0, cfg(trans)->base_params->num_of_queues)); - - /* Activate all Tx DMA/FIFO channels */ - iwl_trans_txq_set_sched(trans, IWL_MASK(0, 7)); - - /* map queues to FIFOs */ - if (trans->shrd->valid_contexts != BIT(IWL_RXON_CTX_BSS)) - queue_to_fifo = iwlagn_ipan_queue_to_tx_fifo; - else - queue_to_fifo = iwlagn_default_queue_to_tx_fifo; - - iwl_trans_set_wr_ptrs(trans, trans_pcie->cmd_queue, 0); - - /* make sure all queue are not stopped */ - memset(&trans_pcie->queue_stopped[0], 0, - sizeof(trans_pcie->queue_stopped)); - for (i = 0; i < 4; i++) - atomic_set(&trans_pcie->queue_stop_count[i], 0); - - /* reset to 0 to enable all the queue first */ - trans_pcie->txq_ctx_active_msk = 0; - - BUILD_BUG_ON(ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo) < - IWLAGN_FIRST_AMPDU_QUEUE); - BUILD_BUG_ON(ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo) < - IWLAGN_FIRST_AMPDU_QUEUE); - - for (i = 0; i < IWLAGN_FIRST_AMPDU_QUEUE; i++) { - int fifo = queue_to_fifo[i].fifo; - int ac = queue_to_fifo[i].ac; - - iwl_txq_ctx_activate(trans_pcie, i); - - if (fifo == IWL_TX_FIFO_UNUSED) - continue; - - if (ac != IWL_AC_UNSET) - iwl_set_swq_id(&trans_pcie->txq[i], ac, i); - iwl_trans_tx_queue_set_status(trans, &trans_pcie->txq[i], - fifo, 0); - } - - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - /* Enable L1-Active */ - iwl_clear_bits_prph(trans, APMG_PCIDEV_STT_REG, - APMG_PCIDEV_STT_VAL_L1_ACT_DIS); -} - -static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans) -{ - iwl_reset_ict(trans); - iwl_tx_start(trans); -} - -/** - * iwlagn_txq_ctx_stop - Stop all Tx DMA channels - */ -static int iwl_trans_tx_stop(struct iwl_trans *trans) -{ - int ch, txq_id, ret; - unsigned long flags; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - /* Turn off all Tx DMA fifos */ - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - - iwl_trans_txq_set_sched(trans, 0); - - /* Stop each Tx DMA channel, and wait for it to be idle */ - for (ch = 0; ch < FH_TCSR_CHNL_NUM; ch++) { - iwl_write_direct32(trans, - FH_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); - ret = iwl_poll_direct_bit(trans, FH_TSSR_TX_STATUS_REG, - FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), - 1000); - if (ret < 0) - IWL_ERR(trans, "Failing on timeout while stopping" - " DMA channel %d [0x%08x]", ch, - iwl_read_direct32(trans, - FH_TSSR_TX_STATUS_REG)); - } - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - if (!trans_pcie->txq) { - IWL_WARN(trans, "Stopping tx queues that aren't allocated..."); - return 0; - } - - /* Unmap DMA from host system and free skb's */ - for (txq_id = 0; txq_id < cfg(trans)->base_params->num_of_queues; - txq_id++) - iwl_tx_queue_unmap(trans, txq_id); - - return 0; -} - -static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) -{ - unsigned long flags; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - /* tell the device to stop sending interrupts */ - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwl_disable_interrupts(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - /* device going down, Stop using ICT table */ - iwl_disable_ict(trans); - - /* - * If a HW restart happens during firmware loading, - * then the firmware loading might call this function - * and later it might be called again due to the - * restart. So don't process again if the device is - * already dead. - */ - if (test_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status)) { - iwl_trans_tx_stop(trans); -#ifndef CONFIG_IWLWIFI_IDI - iwl_trans_rx_stop(trans); -#endif - /* Power-down device's busmaster DMA clocks */ - iwl_write_prph(trans, APMG_CLK_DIS_REG, - APMG_CLK_VAL_DMA_CLK_RQT); - udelay(5); - } - - /* Make sure (redundant) we've released our request to stay awake */ - iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - /* Stop the device, and put it in low power state */ - iwl_apm_stop(trans); - - /* Upon stop, the APM issues an interrupt if HW RF kill is set. - * Clean again the interrupt here - */ - spin_lock_irqsave(&trans_pcie->irq_lock, flags); - iwl_disable_interrupts(trans); - spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(trans_pcie->irq); - tasklet_kill(&trans_pcie->irq_tasklet); - - cancel_work_sync(&trans_pcie->rx_replenish); - - /* stop and reset the on-board processor */ - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); -} - -static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans) -{ - /* let the ucode operate on its own */ - iwl_write32(trans, CSR_UCODE_DRV_GP1_SET, - CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); - - iwl_disable_interrupts(trans); - iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); -} - -static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, - struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, - u8 sta_id, u8 tid) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl_tx_cmd *tx_cmd = (struct iwl_tx_cmd *) dev_cmd->payload; - struct iwl_cmd_meta *out_meta; - struct iwl_tx_queue *txq; - struct iwl_queue *q; - - dma_addr_t phys_addr = 0; - dma_addr_t txcmd_phys; - dma_addr_t scratch_phys; - u16 len, firstlen, secondlen; - u8 wait_write_ptr = 0; - u8 txq_id; - bool is_agg = false; - __le16 fc = hdr->frame_control; - u8 hdr_len = ieee80211_hdrlen(fc); - u16 __maybe_unused wifi_seq; - - /* - * Send this frame after DTIM -- there's a special queue - * reserved for this for contexts that support AP mode. - */ - if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { - txq_id = trans_pcie->mcast_queue[ctx]; - - /* - * The microcode will clear the more data - * bit in the last frame it transmits. - */ - hdr->frame_control |= - cpu_to_le16(IEEE80211_FCTL_MOREDATA); - } else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) - txq_id = IWL_AUX_QUEUE; - else - txq_id = - trans_pcie->ac_to_queue[ctx][skb_get_queue_mapping(skb)]; - - /* aggregation is on for this <sta,tid> */ - if (info->flags & IEEE80211_TX_CTL_AMPDU) { - WARN_ON(tid >= IWL_MAX_TID_COUNT); - txq_id = trans_pcie->agg_txq[sta_id][tid]; - is_agg = true; - } - - txq = &trans_pcie->txq[txq_id]; - q = &txq->q; - - spin_lock(&txq->lock); - - /* In AGG mode, the index in the ring must correspond to the WiFi - * sequence number. This is a HW requirements to help the SCD to parse - * the BA. - * Check here that the packets are in the right place on the ring. - */ -#ifdef CONFIG_IWLWIFI_DEBUG - wifi_seq = SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl)); - WARN_ONCE(is_agg && ((wifi_seq & 0xff) != q->write_ptr), - "Q: %d WiFi Seq %d tfdNum %d", - txq_id, wifi_seq, q->write_ptr); -#endif - - /* Set up driver data for this TFD */ - txq->skbs[q->write_ptr] = skb; - txq->cmd[q->write_ptr] = dev_cmd; - - dev_cmd->hdr.cmd = REPLY_TX; - dev_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) | - INDEX_TO_SEQ(q->write_ptr))); - - /* Set up first empty entry in queue's array of Tx/cmd buffers */ - out_meta = &txq->meta[q->write_ptr]; - - /* - * Use the first empty entry in this queue's command buffer array - * to contain the Tx command and MAC header concatenated together - * (payload data will be in another buffer). - * Size of this varies, due to varying MAC header length. - * If end is not dword aligned, we'll have 2 extra bytes at the end - * of the MAC header (device reads on dword boundaries). - * We'll tell device about this padding later. - */ - len = sizeof(struct iwl_tx_cmd) + - sizeof(struct iwl_cmd_header) + hdr_len; - firstlen = (len + 3) & ~3; - - /* Tell NIC about any 2-byte padding after MAC header */ - if (firstlen != len) - tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - - /* Physical address of this Tx command's header (not MAC header!), - * within command buffer array. */ - txcmd_phys = dma_map_single(trans->dev, - &dev_cmd->hdr, firstlen, - DMA_BIDIRECTIONAL); - if (unlikely(dma_mapping_error(trans->dev, txcmd_phys))) - goto out_err; - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); - - if (!ieee80211_has_morefrags(fc)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - /* Set up TFD's 2nd entry to point directly to remainder of skb, - * if any (802.11 null frames have no payload). */ - secondlen = skb->len - hdr_len; - if (secondlen > 0) { - phys_addr = dma_map_single(trans->dev, skb->data + hdr_len, - secondlen, DMA_TO_DEVICE); - if (unlikely(dma_mapping_error(trans->dev, phys_addr))) { - dma_unmap_single(trans->dev, - dma_unmap_addr(out_meta, mapping), - dma_unmap_len(out_meta, len), - DMA_BIDIRECTIONAL); - goto out_err; - } - } - - /* Attach buffers to TFD */ - iwlagn_txq_attach_buf_to_tfd(trans, txq, txcmd_phys, firstlen, 1); - if (secondlen > 0) - iwlagn_txq_attach_buf_to_tfd(trans, txq, phys_addr, - secondlen, 0); - - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl_tx_cmd, scratch); - - /* take back ownership of DMA buffer to enable update */ - dma_sync_single_for_cpu(trans->dev, txcmd_phys, firstlen, - DMA_BIDIRECTIONAL); - tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); - tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - - IWL_DEBUG_TX(trans, "sequence nr = 0X%x\n", - le16_to_cpu(dev_cmd->hdr.sequence)); - IWL_DEBUG_TX(trans, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - - /* Set up entry for this TFD in Tx byte-count array */ - iwl_trans_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); - - dma_sync_single_for_device(trans->dev, txcmd_phys, firstlen, - DMA_BIDIRECTIONAL); - - trace_iwlwifi_dev_tx(trans->dev, - &((struct iwl_tfd *)txq->tfds)[txq->q.write_ptr], - sizeof(struct iwl_tfd), - &dev_cmd->hdr, firstlen, - skb->data + hdr_len, secondlen); - - /* Tell device the write index *just past* this latest filled TFD */ - q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); - iwl_txq_update_write_ptr(trans, txq); - - /* - * At this point the frame is "transmitted" successfully - * and we will get a TX status notification eventually, - * regardless of the value of ret. "ret" only indicates - * whether or not we should update the write pointer. - */ - if (iwl_queue_space(q) < q->high_mark) { - if (wait_write_ptr) { - txq->need_update = 1; - iwl_txq_update_write_ptr(trans, txq); - } else { - iwl_stop_queue(trans, txq); - } - } - spin_unlock(&txq->lock); - return 0; - out_err: - spin_unlock(&txq->lock); - return -1; -} - -static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - int err; - bool hw_rfkill; - - trans_pcie->inta_mask = CSR_INI_SET_MASK; - - if (!trans_pcie->irq_requested) { - tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) - iwl_irq_tasklet, (unsigned long)trans); - - iwl_alloc_isr_ict(trans); - - err = request_irq(trans_pcie->irq, iwl_isr_ict, IRQF_SHARED, - DRV_NAME, trans); - if (err) { - IWL_ERR(trans, "Error allocating IRQ %d\n", - trans_pcie->irq); - goto error; - } - - INIT_WORK(&trans_pcie->rx_replenish, iwl_bg_rx_replenish); - trans_pcie->irq_requested = true; - } - - err = iwl_prepare_card_hw(trans); - if (err) { - IWL_ERR(trans, "Error while preparing HW: %d", err); - goto err_free_irq; - } - - iwl_apm_init(trans); - - hw_rfkill = !(iwl_read32(trans, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); - iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - - return err; - -err_free_irq: - free_irq(trans_pcie->irq, trans); -error: - iwl_free_isr_ict(trans); - tasklet_kill(&trans_pcie->irq_tasklet); - return err; -} - -static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans) -{ - iwl_apm_stop(trans); - - iwl_write32(trans, CSR_INT, 0xFFFFFFFF); - - /* Even if we stop the HW, we still want the RF kill interrupt */ - iwl_enable_rfkill_int(trans); -} - -static int iwl_trans_pcie_reclaim(struct iwl_trans *trans, int sta_id, int tid, - int txq_id, int ssn, struct sk_buff_head *skbs) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[txq_id]; - /* n_bd is usually 256 => n_bd - 1 = 0xff */ - int tfd_num = ssn & (txq->q.n_bd - 1); - int freed = 0; - - spin_lock(&txq->lock); - - txq->time_stamp = jiffies; - - if (unlikely(txq_id >= IWLAGN_FIRST_AMPDU_QUEUE && - tid != IWL_TID_NON_QOS && - txq_id != trans_pcie->agg_txq[sta_id][tid])) { - /* - * FIXME: this is a uCode bug which need to be addressed, - * log the information and return for now. - * Since it is can possibly happen very often and in order - * not to fill the syslog, don't use IWL_ERR or IWL_WARN - */ - IWL_DEBUG_TX_QUEUES(trans, "Bad queue mapping txq_id %d, " - "agg_txq[sta_id[tid] %d", txq_id, - trans_pcie->agg_txq[sta_id][tid]); - spin_unlock(&txq->lock); - return 1; - } - - if (txq->q.read_ptr != tfd_num) { - IWL_DEBUG_TX_REPLY(trans, "[Q %d | AC %d] %d -> %d (%d)\n", - txq_id, iwl_get_queue_ac(txq), txq->q.read_ptr, - tfd_num, ssn); - freed = iwl_tx_queue_reclaim(trans, txq_id, tfd_num, skbs); - if (iwl_queue_space(&txq->q) > txq->q.low_mark) - iwl_wake_queue(trans, txq); - } - - spin_unlock(&txq->lock); - return 0; -} - -static void iwl_trans_pcie_write8(struct iwl_trans *trans, u32 ofs, u8 val) -{ - writeb(val, IWL_TRANS_GET_PCIE_TRANS(trans)->hw_base + ofs); -} - -static void iwl_trans_pcie_write32(struct iwl_trans *trans, u32 ofs, u32 val) -{ - writel(val, IWL_TRANS_GET_PCIE_TRANS(trans)->hw_base + ofs); -} - -static u32 iwl_trans_pcie_read32(struct iwl_trans *trans, u32 ofs) -{ - return readl(IWL_TRANS_GET_PCIE_TRANS(trans)->hw_base + ofs); -} - -static void iwl_trans_pcie_configure(struct iwl_trans *trans, - const struct iwl_trans_config *trans_cfg) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - trans_pcie->cmd_queue = trans_cfg->cmd_queue; - if (WARN_ON(trans_cfg->n_no_reclaim_cmds > MAX_NO_RECLAIM_CMDS)) - trans_pcie->n_no_reclaim_cmds = 0; - else - trans_pcie->n_no_reclaim_cmds = trans_cfg->n_no_reclaim_cmds; - if (trans_pcie->n_no_reclaim_cmds) - memcpy(trans_pcie->no_reclaim_cmds, trans_cfg->no_reclaim_cmds, - trans_pcie->n_no_reclaim_cmds * sizeof(u8)); -} - -static void iwl_trans_pcie_free(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - - iwl_trans_pcie_tx_free(trans); -#ifndef CONFIG_IWLWIFI_IDI - iwl_trans_pcie_rx_free(trans); -#endif - if (trans_pcie->irq_requested == true) { - free_irq(trans_pcie->irq, trans); - iwl_free_isr_ict(trans); - } - - pci_disable_msi(trans_pcie->pci_dev); - iounmap(trans_pcie->hw_base); - pci_release_regions(trans_pcie->pci_dev); - pci_disable_device(trans_pcie->pci_dev); - - trans->shrd->trans = NULL; - kfree(trans); -} - -#ifdef CONFIG_PM_SLEEP -static int iwl_trans_pcie_suspend(struct iwl_trans *trans) -{ - return 0; -} - -static int iwl_trans_pcie_resume(struct iwl_trans *trans) -{ - bool hw_rfkill; - - hw_rfkill = !(iwl_read32(trans, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW); - - if (hw_rfkill) - iwl_enable_rfkill_int(trans); - else - iwl_enable_interrupts(trans); - - iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - - return 0; -} -#endif /* CONFIG_PM_SLEEP */ - -#define IWL_FLUSH_WAIT_MS 2000 - -static int iwl_trans_pcie_wait_tx_queue_empty(struct iwl_trans *trans) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq; - struct iwl_queue *q; - int cnt; - unsigned long now = jiffies; - int ret = 0; - - /* waiting for all the tx frames complete might take a while */ - for (cnt = 0; cnt < cfg(trans)->base_params->num_of_queues; cnt++) { - if (cnt == trans_pcie->cmd_queue) - continue; - txq = &trans_pcie->txq[cnt]; - q = &txq->q; - while (q->read_ptr != q->write_ptr && !time_after(jiffies, - now + msecs_to_jiffies(IWL_FLUSH_WAIT_MS))) - msleep(1); - - if (q->read_ptr != q->write_ptr) { - IWL_ERR(trans, "fail to flush all tx fifo queues\n"); - ret = -ETIMEDOUT; - break; - } - } - return ret; -} - -/* - * On every watchdog tick we check (latest) time stamp. If it does not - * change during timeout period and queue is not empty we reset firmware. - */ -static int iwl_trans_pcie_check_stuck_queue(struct iwl_trans *trans, int cnt) -{ - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq = &trans_pcie->txq[cnt]; - struct iwl_queue *q = &txq->q; - unsigned long timeout; - - if (q->read_ptr == q->write_ptr) { - txq->time_stamp = jiffies; - return 0; - } - - timeout = txq->time_stamp + - msecs_to_jiffies(hw_params(trans).wd_timeout); - - if (time_after(jiffies, timeout)) { - IWL_ERR(trans, "Queue %d stuck for %u ms.\n", q->id, - hw_params(trans).wd_timeout); - IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n", - q->read_ptr, q->write_ptr); - IWL_ERR(trans, "Current HW read_ptr %d write_ptr %d\n", - iwl_read_prph(trans, SCD_QUEUE_RDPTR(cnt)) - & (TFD_QUEUE_SIZE_MAX - 1), - iwl_read_prph(trans, SCD_QUEUE_WRPTR(cnt))); - return 1; - } - - return 0; -} - -static const char *get_fh_string(int cmd) -{ - switch (cmd) { - IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); - IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); - IWL_CMD(FH_RSCSR_CHNL0_WPTR); - IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); - IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); - IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG); - IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); - IWL_CMD(FH_TSSR_TX_STATUS_REG); - IWL_CMD(FH_TSSR_TX_ERROR_REG); - default: - return "UNKNOWN"; - } -} - -int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display) -{ - int i; -#ifdef CONFIG_IWLWIFI_DEBUG - int pos = 0; - size_t bufsz = 0; -#endif - static const u32 fh_tbl[] = { - FH_RSCSR_CHNL0_STTS_WPTR_REG, - FH_RSCSR_CHNL0_RBDCB_BASE_REG, - FH_RSCSR_CHNL0_WPTR, - FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_MEM_RSSR_SHARED_CTRL_REG, - FH_MEM_RSSR_RX_STATUS_REG, - FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, - FH_TSSR_TX_STATUS_REG, - FH_TSSR_TX_ERROR_REG - }; -#ifdef CONFIG_IWLWIFI_DEBUG - if (display) { - bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; - *buf = kmalloc(bufsz, GFP_KERNEL); - if (!*buf) - return -ENOMEM; - pos += scnprintf(*buf + pos, bufsz - pos, - "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - pos += scnprintf(*buf + pos, bufsz - pos, - " %34s: 0X%08x\n", - get_fh_string(fh_tbl[i]), - iwl_read_direct32(trans, fh_tbl[i])); - } - return pos; - } -#endif - IWL_ERR(trans, "FH register values:\n"); - for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { - IWL_ERR(trans, " %34s: 0X%08x\n", - get_fh_string(fh_tbl[i]), - iwl_read_direct32(trans, fh_tbl[i])); - } - return 0; -} - -static const char *get_csr_string(int cmd) -{ - switch (cmd) { - IWL_CMD(CSR_HW_IF_CONFIG_REG); - IWL_CMD(CSR_INT_COALESCING); - IWL_CMD(CSR_INT); - IWL_CMD(CSR_INT_MASK); - IWL_CMD(CSR_FH_INT_STATUS); - IWL_CMD(CSR_GPIO_IN); - IWL_CMD(CSR_RESET); - IWL_CMD(CSR_GP_CNTRL); - IWL_CMD(CSR_HW_REV); - IWL_CMD(CSR_EEPROM_REG); - IWL_CMD(CSR_EEPROM_GP); - IWL_CMD(CSR_OTP_GP_REG); - IWL_CMD(CSR_GIO_REG); - IWL_CMD(CSR_GP_UCODE_REG); - IWL_CMD(CSR_GP_DRIVER_REG); - IWL_CMD(CSR_UCODE_DRV_GP1); - IWL_CMD(CSR_UCODE_DRV_GP2); - IWL_CMD(CSR_LED_REG); - IWL_CMD(CSR_DRAM_INT_TBL_REG); - IWL_CMD(CSR_GIO_CHICKEN_BITS); - IWL_CMD(CSR_ANA_PLL_CFG); - IWL_CMD(CSR_HW_REV_WA_REG); - IWL_CMD(CSR_DBG_HPET_MEM_REG); - default: - return "UNKNOWN"; - } -} - -void iwl_dump_csr(struct iwl_trans *trans) -{ - int i; - static const u32 csr_tbl[] = { - CSR_HW_IF_CONFIG_REG, - CSR_INT_COALESCING, - CSR_INT, - CSR_INT_MASK, - CSR_FH_INT_STATUS, - CSR_GPIO_IN, - CSR_RESET, - CSR_GP_CNTRL, - CSR_HW_REV, - CSR_EEPROM_REG, - CSR_EEPROM_GP, - CSR_OTP_GP_REG, - CSR_GIO_REG, - CSR_GP_UCODE_REG, - CSR_GP_DRIVER_REG, - CSR_UCODE_DRV_GP1, - CSR_UCODE_DRV_GP2, - CSR_LED_REG, - CSR_DRAM_INT_TBL_REG, - CSR_GIO_CHICKEN_BITS, - CSR_ANA_PLL_CFG, - CSR_HW_REV_WA_REG, - CSR_DBG_HPET_MEM_REG - }; - IWL_ERR(trans, "CSR values:\n"); - IWL_ERR(trans, "(2nd byte of CSR_INT_COALESCING is " - "CSR_INT_PERIODIC_REG)\n"); - for (i = 0; i < ARRAY_SIZE(csr_tbl); i++) { - IWL_ERR(trans, " %25s: 0X%08x\n", - get_csr_string(csr_tbl[i]), - iwl_read32(trans, csr_tbl[i])); - } -} - -#ifdef CONFIG_IWLWIFI_DEBUGFS -/* create and remove of files */ -#define DEBUGFS_ADD_FILE(name, parent, mode) do { \ - if (!debugfs_create_file(#name, mode, parent, trans, \ - &iwl_dbgfs_##name##_ops)) \ - return -ENOMEM; \ -} while (0) - -/* file operation */ -#define DEBUGFS_READ_FUNC(name) \ -static ssize_t iwl_dbgfs_##name##_read(struct file *file, \ - char __user *user_buf, \ - size_t count, loff_t *ppos); - -#define DEBUGFS_WRITE_FUNC(name) \ -static ssize_t iwl_dbgfs_##name##_write(struct file *file, \ - const char __user *user_buf, \ - size_t count, loff_t *ppos); - - -#define DEBUGFS_READ_FILE_OPS(name) \ - DEBUGFS_READ_FUNC(name); \ -static const struct file_operations iwl_dbgfs_##name##_ops = { \ - .read = iwl_dbgfs_##name##_read, \ - .open = simple_open, \ - .llseek = generic_file_llseek, \ -}; - -#define DEBUGFS_WRITE_FILE_OPS(name) \ - DEBUGFS_WRITE_FUNC(name); \ -static const struct file_operations iwl_dbgfs_##name##_ops = { \ - .write = iwl_dbgfs_##name##_write, \ - .open = simple_open, \ - .llseek = generic_file_llseek, \ -}; - -#define DEBUGFS_READ_WRITE_FILE_OPS(name) \ - DEBUGFS_READ_FUNC(name); \ - DEBUGFS_WRITE_FUNC(name); \ -static const struct file_operations iwl_dbgfs_##name##_ops = { \ - .write = iwl_dbgfs_##name##_write, \ - .read = iwl_dbgfs_##name##_read, \ - .open = simple_open, \ - .llseek = generic_file_llseek, \ -}; - -static ssize_t iwl_dbgfs_tx_queue_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_trans *trans = file->private_data; - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_tx_queue *txq; - struct iwl_queue *q; - char *buf; - int pos = 0; - int cnt; - int ret; - size_t bufsz; - - bufsz = sizeof(char) * 64 * cfg(trans)->base_params->num_of_queues; - - if (!trans_pcie->txq) { - IWL_ERR(trans, "txq not ready\n"); - return -EAGAIN; - } - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - for (cnt = 0; cnt < cfg(trans)->base_params->num_of_queues; cnt++) { - txq = &trans_pcie->txq[cnt]; - q = &txq->q; - pos += scnprintf(buf + pos, bufsz - pos, - "hwq %.2d: read=%u write=%u stop=%d" - " swq_id=%#.2x (ac %d/hwq %d)\n", - cnt, q->read_ptr, q->write_ptr, - !!test_bit(cnt, trans_pcie->queue_stopped), - txq->swq_id, txq->swq_id & 3, - (txq->swq_id >> 2) & 0x1f); - if (cnt >= 4) - continue; - /* for the ACs, display the stop count too */ - pos += scnprintf(buf + pos, bufsz - pos, - " stop-count: %d\n", - atomic_read(&trans_pcie->queue_stop_count[cnt])); - } - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_rx_queue_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - struct iwl_trans *trans = file->private_data; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct iwl_rx_queue *rxq = &trans_pcie->rxq; - char buf[256]; - int pos = 0; - const size_t bufsz = sizeof(buf); - - pos += scnprintf(buf + pos, bufsz - pos, "read: %u\n", - rxq->read); - pos += scnprintf(buf + pos, bufsz - pos, "write: %u\n", - rxq->write); - pos += scnprintf(buf + pos, bufsz - pos, "free_count: %u\n", - rxq->free_count); - if (rxq->rb_stts) { - pos += scnprintf(buf + pos, bufsz - pos, "closed_rb_num: %u\n", - le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF); - } else { - pos += scnprintf(buf + pos, bufsz - pos, - "closed_rb_num: Not Allocated\n"); - } - return simple_read_from_buffer(user_buf, count, ppos, buf, pos); -} - -#ifdef CONFIG_IWLWIFI_DEBUG -static ssize_t iwl_dbgfs_log_event_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_trans *trans = file->private_data; - char *buf; - int pos = 0; - ssize_t ret = -ENOMEM; - - ret = pos = iwl_dump_nic_event_log(trans, true, &buf, true); - if (buf) { - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - } - return ret; -} - -static ssize_t iwl_dbgfs_log_event_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_trans *trans = file->private_data; - u32 event_log_flag; - char buf[8]; - int buf_size; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &event_log_flag) != 1) - return -EFAULT; - if (event_log_flag == 1) - iwl_dump_nic_event_log(trans, true, NULL, false); - - return count; -} -#endif - -static ssize_t iwl_dbgfs_interrupt_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) { - - struct iwl_trans *trans = file->private_data; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct isr_statistics *isr_stats = &trans_pcie->isr_stats; - - int pos = 0; - char *buf; - int bufsz = 24 * 64; /* 24 items * 64 char per item */ - ssize_t ret; - - buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) { - IWL_ERR(trans, "Can not allocate Buffer\n"); - return -ENOMEM; - } - - pos += scnprintf(buf + pos, bufsz - pos, - "Interrupt Statistics Report:\n"); - - pos += scnprintf(buf + pos, bufsz - pos, "HW Error:\t\t\t %u\n", - isr_stats->hw); - pos += scnprintf(buf + pos, bufsz - pos, "SW Error:\t\t\t %u\n", - isr_stats->sw); - if (isr_stats->sw || isr_stats->hw) { - pos += scnprintf(buf + pos, bufsz - pos, - "\tLast Restarting Code: 0x%X\n", - isr_stats->err_code); - } -#ifdef CONFIG_IWLWIFI_DEBUG - pos += scnprintf(buf + pos, bufsz - pos, "Frame transmitted:\t\t %u\n", - isr_stats->sch); - pos += scnprintf(buf + pos, bufsz - pos, "Alive interrupt:\t\t %u\n", - isr_stats->alive); -#endif - pos += scnprintf(buf + pos, bufsz - pos, - "HW RF KILL switch toggled:\t %u\n", isr_stats->rfkill); - - pos += scnprintf(buf + pos, bufsz - pos, "CT KILL:\t\t\t %u\n", - isr_stats->ctkill); - - pos += scnprintf(buf + pos, bufsz - pos, "Wakeup Interrupt:\t\t %u\n", - isr_stats->wakeup); - - pos += scnprintf(buf + pos, bufsz - pos, - "Rx command responses:\t\t %u\n", isr_stats->rx); - - pos += scnprintf(buf + pos, bufsz - pos, "Tx/FH interrupt:\t\t %u\n", - isr_stats->tx); - - pos += scnprintf(buf + pos, bufsz - pos, "Unexpected INTA:\t\t %u\n", - isr_stats->unhandled); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); - kfree(buf); - return ret; -} - -static ssize_t iwl_dbgfs_interrupt_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_trans *trans = file->private_data; - struct iwl_trans_pcie *trans_pcie = - IWL_TRANS_GET_PCIE_TRANS(trans); - struct isr_statistics *isr_stats = &trans_pcie->isr_stats; - - char buf[8]; - int buf_size; - u32 reset_flag; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%x", &reset_flag) != 1) - return -EFAULT; - if (reset_flag == 0) - memset(isr_stats, 0, sizeof(*isr_stats)); - - return count; -} - -static ssize_t iwl_dbgfs_csr_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_trans *trans = file->private_data; - char buf[8]; - int buf_size; - int csr; - - memset(buf, 0, sizeof(buf)); - buf_size = min(count, sizeof(buf) - 1); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - if (sscanf(buf, "%d", &csr) != 1) - return -EFAULT; - - iwl_dump_csr(trans); - - return count; -} - -static ssize_t iwl_dbgfs_fh_reg_read(struct file *file, - char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct iwl_trans *trans = file->private_data; - char *buf; - int pos = 0; - ssize_t ret = -EFAULT; - - ret = pos = iwl_dump_fh(trans, &buf, true); - if (buf) { - ret = simple_read_from_buffer(user_buf, - count, ppos, buf, pos); - kfree(buf); - } - - return ret; -} - -#ifdef CONFIG_IWLWIFI_DEBUG -DEBUGFS_READ_WRITE_FILE_OPS(log_event); -#endif -DEBUGFS_READ_WRITE_FILE_OPS(interrupt); -DEBUGFS_READ_FILE_OPS(fh_reg); -DEBUGFS_READ_FILE_OPS(rx_queue); -DEBUGFS_READ_FILE_OPS(tx_queue); -DEBUGFS_WRITE_FILE_OPS(csr); - -/* - * Create the debugfs files and directories - * - */ -static int iwl_trans_pcie_dbgfs_register(struct iwl_trans *trans, - struct dentry *dir) -{ - DEBUGFS_ADD_FILE(rx_queue, dir, S_IRUSR); - DEBUGFS_ADD_FILE(tx_queue, dir, S_IRUSR); -#ifdef CONFIG_IWLWIFI_DEBUG - DEBUGFS_ADD_FILE(log_event, dir, S_IWUSR | S_IRUSR); -#endif - DEBUGFS_ADD_FILE(interrupt, dir, S_IWUSR | S_IRUSR); - DEBUGFS_ADD_FILE(csr, dir, S_IWUSR); - DEBUGFS_ADD_FILE(fh_reg, dir, S_IRUSR); - return 0; -} -#else -static int iwl_trans_pcie_dbgfs_register(struct iwl_trans *trans, - struct dentry *dir) -{ return 0; } - -#endif /*CONFIG_IWLWIFI_DEBUGFS */ - -const struct iwl_trans_ops trans_ops_pcie = { - .start_hw = iwl_trans_pcie_start_hw, - .stop_hw = iwl_trans_pcie_stop_hw, - .fw_alive = iwl_trans_pcie_fw_alive, - .start_fw = iwl_trans_pcie_start_fw, - .stop_device = iwl_trans_pcie_stop_device, - - .wowlan_suspend = iwl_trans_pcie_wowlan_suspend, - - .send_cmd = iwl_trans_pcie_send_cmd, - - .tx = iwl_trans_pcie_tx, - .reclaim = iwl_trans_pcie_reclaim, - - .tx_agg_disable = iwl_trans_pcie_tx_agg_disable, - .tx_agg_alloc = iwl_trans_pcie_tx_agg_alloc, - .tx_agg_setup = iwl_trans_pcie_tx_agg_setup, - - .free = iwl_trans_pcie_free, - - .dbgfs_register = iwl_trans_pcie_dbgfs_register, - - .wait_tx_queue_empty = iwl_trans_pcie_wait_tx_queue_empty, - .check_stuck_queue = iwl_trans_pcie_check_stuck_queue, - -#ifdef CONFIG_PM_SLEEP - .suspend = iwl_trans_pcie_suspend, - .resume = iwl_trans_pcie_resume, -#endif - .write8 = iwl_trans_pcie_write8, - .write32 = iwl_trans_pcie_write32, - .read32 = iwl_trans_pcie_read32, - .configure = iwl_trans_pcie_configure, -}; - -struct iwl_trans *iwl_trans_pcie_alloc(struct iwl_shared *shrd, - struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct iwl_trans_pcie *trans_pcie; - struct iwl_trans *trans; - u16 pci_cmd; - int err; - - trans = kzalloc(sizeof(struct iwl_trans) + - sizeof(struct iwl_trans_pcie), GFP_KERNEL); - - if (WARN_ON(!trans)) - return NULL; - - trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - - trans->ops = &trans_ops_pcie; - trans->shrd = shrd; - trans_pcie->trans = trans; - spin_lock_init(&trans_pcie->irq_lock); - init_waitqueue_head(&trans_pcie->ucode_write_waitq); - - /* W/A - seems to solve weird behavior. We need to remove this if we - * don't want to stay in L1 all the time. This wastes a lot of power */ - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | - PCIE_LINK_STATE_CLKPM); - - if (pci_enable_device(pdev)) { - err = -ENODEV; - goto out_no_pci; - } - - pci_set_master(pdev); - - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36)); - if (err) { - err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (!err) - err = pci_set_consistent_dma_mask(pdev, - DMA_BIT_MASK(32)); - /* both attempts failed: */ - if (err) { - dev_printk(KERN_ERR, &pdev->dev, - "No suitable DMA available.\n"); - goto out_pci_disable_device; - } - } - - err = pci_request_regions(pdev, DRV_NAME); - if (err) { - dev_printk(KERN_ERR, &pdev->dev, "pci_request_regions failed"); - goto out_pci_disable_device; - } - - trans_pcie->hw_base = pci_ioremap_bar(pdev, 0); - if (!trans_pcie->hw_base) { - dev_printk(KERN_ERR, &pdev->dev, "pci_ioremap_bar failed"); - err = -ENODEV; - goto out_pci_release_regions; - } - - dev_printk(KERN_INFO, &pdev->dev, - "pci_resource_len = 0x%08llx\n", - (unsigned long long) pci_resource_len(pdev, 0)); - dev_printk(KERN_INFO, &pdev->dev, - "pci_resource_base = %p\n", trans_pcie->hw_base); - - dev_printk(KERN_INFO, &pdev->dev, - "HW Revision ID = 0x%X\n", pdev->revision); - - /* We disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state */ - pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - - err = pci_enable_msi(pdev); - if (err) - dev_printk(KERN_ERR, &pdev->dev, - "pci_enable_msi failed(0X%x)", err); - - trans->dev = &pdev->dev; - trans_pcie->irq = pdev->irq; - trans_pcie->pci_dev = pdev; - trans->hw_rev = iwl_read32(trans, CSR_HW_REV); - trans->hw_id = (pdev->device << 16) + pdev->subsystem_device; - snprintf(trans->hw_id_str, sizeof(trans->hw_id_str), - "PCI ID: 0x%04X:0x%04X", pdev->device, pdev->subsystem_device); - - /* TODO: Move this away, not needed if not MSI */ - /* enable rfkill interrupt: hw bug w/a */ - pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd); - if (pci_cmd & PCI_COMMAND_INTX_DISABLE) { - pci_cmd &= ~PCI_COMMAND_INTX_DISABLE; - pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); - } - - /* Initialize the wait queue for commands */ - init_waitqueue_head(&trans->wait_command_queue); - - return trans; - -out_pci_release_regions: - pci_release_regions(pdev); -out_pci_disable_device: - pci_disable_device(pdev); -out_no_pci: - kfree(trans); - return NULL; -} - diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans.h b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans.h deleted file mode 100644 index fdf97886..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-trans.h +++ /dev/null @@ -1,631 +0,0 @@ -/****************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - * BSD LICENSE - * - * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - *****************************************************************************/ -#ifndef __iwl_trans_h__ -#define __iwl_trans_h__ - -#include <linux/ieee80211.h> -#include <linux/mm.h> /* for page_address */ - -#include "iwl-shared.h" -#include "iwl-debug.h" - -/** - * DOC: Transport layer - what is it ? - * - * The tranport layer is the layer that deals with the HW directly. It provides - * an abstraction of the underlying HW to the upper layer. The transport layer - * doesn't provide any policy, algorithm or anything of this kind, but only - * mechanisms to make the HW do something.It is not completely stateless but - * close to it. - * We will have an implementation for each different supported bus. - */ - -/** - * DOC: Life cycle of the transport layer - * - * The transport layer has a very precise life cycle. - * - * 1) A helper function is called during the module initialization and - * registers the bus driver's ops with the transport's alloc function. - * 2) Bus's probe calls to the transport layer's allocation functions. - * Of course this function is bus specific. - * 3) This allocation functions will spawn the upper layer which will - * register mac80211. - * - * 4) At some point (i.e. mac80211's start call), the op_mode will call - * the following sequence: - * start_hw - * start_fw - * - * 5) Then when finished (or reset): - * stop_fw (a.k.a. stop device for the moment) - * stop_hw - * - * 6) Eventually, the free function will be called. - */ - -struct iwl_priv; -struct iwl_shared; -struct iwl_op_mode; -struct fw_img; -struct sk_buff; -struct dentry; - -/** - * DOC: Host command section - * - * A host command is a commaned issued by the upper layer to the fw. There are - * several versions of fw that have several APIs. The transport layer is - * completely agnostic to these differences. - * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode), - */ -#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) -#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) -#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) -#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) -#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) -#define SEQ_TO_INDEX(s) ((s) & 0xff) -#define INDEX_TO_SEQ(i) ((i) & 0xff) -#define SEQ_RX_FRAME cpu_to_le16(0x8000) - -/** - * struct iwl_cmd_header - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - */ -struct iwl_cmd_header { - u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 flags; /* 0:5 reserved, 6 abort, 7 internal */ - /* - * The driver sets up the sequence number to values of its choosing. - * uCode does not use this value, but passes it back to the driver - * when sending the response to each driver-originated command, so - * the driver can match the response to the command. Since the values - * don't get used by uCode, the driver may set up an arbitrary format. - * - * There is one exception: uCode sets bit 15 when it originates - * the response/notification, i.e. when the response/notification - * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_RX when it sends a received frame - * to the driver; it is not a direct response to any driver command. - * - * The Linux driver uses the following format: - * - * 0:7 tfd index - position within TX queue - * 8:12 TX queue id - * 13:14 reserved - * 15 unsolicited RX or uCode-originated notification - */ - __le16 sequence; -} __packed; - - -#define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ - -struct iwl_rx_packet { - /* - * The first 4 bytes of the RX frame header contain both the RX frame - * size and some flags. - * Bit fields: - * 31: flag flush RB request - * 30: flag ignore TC (terminal counter) request - * 29: flag fast IRQ request - * 28-14: Reserved - * 13-00: RX frame size - */ - __le32 len_n_flags; - struct iwl_cmd_header hdr; - u8 data[]; -} __packed; - -/** - * enum CMD_MODE - how to send the host commands ? - * - * @CMD_SYNC: The caller will be stalled until the fw responds to the command - * @CMD_ASYNC: Return right away and don't want for the response - * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the - * response. - * @CMD_ON_DEMAND: This command is sent by the test mode pipe. - */ -enum CMD_MODE { - CMD_SYNC = 0, - CMD_ASYNC = BIT(0), - CMD_WANT_SKB = BIT(1), - CMD_ON_DEMAND = BIT(2), -}; - -#define DEF_CMD_PAYLOAD_SIZE 320 - -/** - * struct iwl_device_cmd - * - * For allocation of the command and tx queues, this establishes the overall - * size of the largest command we send to uCode, except for commands that - * aren't fully copied and use other TFD space. - */ -struct iwl_device_cmd { - struct iwl_cmd_header hdr; /* uCode API */ - u8 payload[DEF_CMD_PAYLOAD_SIZE]; -} __packed; - -#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) - -#define IWL_MAX_CMD_TFDS 2 - -/** - * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command - * - * IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's - * ring. The transport layer doesn't map the command's buffer to DMA, but - * rather copies it to an previously allocated DMA buffer. This flag tells - * the transport layer not to copy the command, but to map the existing - * buffer. This can save memcpy and is worth with very big comamnds. - */ -enum iwl_hcmd_dataflag { - IWL_HCMD_DFL_NOCOPY = BIT(0), -}; - -/** - * struct iwl_host_cmd - Host command to the uCode - * - * @data: array of chunks that composes the data of the host command - * @resp_pkt: response packet, if %CMD_WANT_SKB was set - * @_rx_page_order: (internally used to free response packet) - * @_rx_page_addr: (internally used to free response packet) - * @handler_status: return value of the handler of the command - * (put in setup_rx_handlers) - valid for SYNC mode only - * @flags: can be CMD_* - * @len: array of the lenths of the chunks in data - * @dataflags: IWL_HCMD_DFL_* - * @id: id of the host command - */ -struct iwl_host_cmd { - const void *data[IWL_MAX_CMD_TFDS]; - struct iwl_rx_packet *resp_pkt; - unsigned long _rx_page_addr; - u32 _rx_page_order; - int handler_status; - - u32 flags; - u16 len[IWL_MAX_CMD_TFDS]; - u8 dataflags[IWL_MAX_CMD_TFDS]; - u8 id; -}; - -static inline void iwl_free_resp(struct iwl_host_cmd *cmd) -{ - free_pages(cmd->_rx_page_addr, cmd->_rx_page_order); -} - -struct iwl_rx_cmd_buffer { - struct page *_page; - unsigned int truesize; -}; - -static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) -{ - return page_address(r->_page); -} - -static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) -{ - struct page *p = r->_page; - r->_page = NULL; - return p; -} - -#define MAX_NO_RECLAIM_CMDS 6 - -/** - * struct iwl_trans_config - transport configuration - * - * @op_mode: pointer to the upper layer. - * Must be set before any other call. - * @cmd_queue: the index of the command queue. - * Must be set before start_fw. - * @no_reclaim_cmds: Some devices erroneously don't set the - * SEQ_RX_FRAME bit on some notifications, this is the - * list of such notifications to filter. Max length is - * %MAX_NO_RECLAIM_CMDS. - * @n_no_reclaim_cmds: # of commands in list - */ -struct iwl_trans_config { - struct iwl_op_mode *op_mode; - u8 cmd_queue; - const u8 *no_reclaim_cmds; - int n_no_reclaim_cmds; -}; - -/** - * struct iwl_trans_ops - transport specific operations - * - * All the handlers MUST be implemented - * - * @start_hw: starts the HW- from that point on, the HW can send interrupts - * May sleep - * @stop_hw: stops the HW- from that point on, the HW will be in low power but - * will still issue interrupt if the HW RF kill is triggered. - * May sleep - * @start_fw: allocates and inits all the resources for the transport - * layer. Also kick a fw image. - * May sleep - * @fw_alive: called when the fw sends alive notification - * May sleep - * @stop_device:stops the whole device (embedded CPU put to reset) - * May sleep - * @wowlan_suspend: put the device into the correct mode for WoWLAN during - * suspend. This is optional, if not implemented WoWLAN will not be - * supported. This callback may sleep. - * @send_cmd:send a host command - * May sleep only if CMD_SYNC is set - * @tx: send an skb - * Must be atomic - * @reclaim: free packet until ssn. Returns a list of freed packets. - * Must be atomic - * @tx_agg_alloc: allocate resources for a TX BA session - * Must be atomic - * @tx_agg_setup: setup a tx queue for AMPDU - will be called once the HW is - * ready and a successful ADDBA response has been received. - * May sleep - * @tx_agg_disable: de-configure a Tx queue to send AMPDUs - * Must be atomic - * @free: release all the ressource for the transport layer itself such as - * irq, tasklet etc... From this point on, the device may not issue - * any interrupt (incl. RFKILL). - * May sleep - * @check_stuck_queue: check if a specific queue is stuck - * @wait_tx_queue_empty: wait until all tx queues are empty - * May sleep - * @dbgfs_register: add the dbgfs files under this directory. Files will be - * automatically deleted. - * @suspend: stop the device unless WoWLAN is configured - * @resume: resume activity of the device - * @write8: write a u8 to a register at offset ofs from the BAR - * @write32: write a u32 to a register at offset ofs from the BAR - * @read32: read a u32 register at offset ofs from the BAR - * @configure: configure parameters required by the transport layer from - * the op_mode. May be called several times before start_fw, can't be - * called after that. - */ -struct iwl_trans_ops { - - int (*start_hw)(struct iwl_trans *iwl_trans); - void (*stop_hw)(struct iwl_trans *iwl_trans); - int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw); - void (*fw_alive)(struct iwl_trans *trans); - void (*stop_device)(struct iwl_trans *trans); - - void (*wowlan_suspend)(struct iwl_trans *trans); - - int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); - - int (*tx)(struct iwl_trans *trans, struct sk_buff *skb, - struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, - u8 sta_id, u8 tid); - int (*reclaim)(struct iwl_trans *trans, int sta_id, int tid, - int txq_id, int ssn, struct sk_buff_head *skbs); - - int (*tx_agg_disable)(struct iwl_trans *trans, - int sta_id, int tid); - int (*tx_agg_alloc)(struct iwl_trans *trans, - int sta_id, int tid); - void (*tx_agg_setup)(struct iwl_trans *trans, - enum iwl_rxon_context_id ctx, int sta_id, int tid, - int frame_limit, u16 ssn); - - void (*free)(struct iwl_trans *trans); - - int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir); - int (*check_stuck_queue)(struct iwl_trans *trans, int q); - int (*wait_tx_queue_empty)(struct iwl_trans *trans); -#ifdef CONFIG_PM_SLEEP - int (*suspend)(struct iwl_trans *trans); - int (*resume)(struct iwl_trans *trans); -#endif - void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); - void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); - u32 (*read32)(struct iwl_trans *trans, u32 ofs); - void (*configure)(struct iwl_trans *trans, - const struct iwl_trans_config *trans_cfg); -}; - -/** - * enum iwl_trans_state - state of the transport layer - * - * @IWL_TRANS_NO_FW: no fw has sent an alive response - * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response - */ -enum iwl_trans_state { - IWL_TRANS_NO_FW = 0, - IWL_TRANS_FW_ALIVE = 1, -}; - -/** - * struct iwl_trans - transport common data - * - * @ops - pointer to iwl_trans_ops - * @op_mode - pointer to the op_mode - * @shrd - pointer to iwl_shared which holds shared data from the upper layer - * @reg_lock - protect hw register access - * @dev - pointer to struct device * that represents the device - * @hw_id: a u32 with the ID of the device / subdevice. - * Set during transport allocation. - * @hw_id_str: a string with info about HW ID. Set during transport allocation. - * @nvm_device_type: indicates OTP or eeprom - * @pm_support: set to true in start_hw if link pm is supported - * @wait_command_queue: the wait_queue for SYNC host commands - */ -struct iwl_trans { - const struct iwl_trans_ops *ops; - struct iwl_op_mode *op_mode; - struct iwl_shared *shrd; - enum iwl_trans_state state; - spinlock_t reg_lock; - - struct device *dev; - u32 hw_rev; - u32 hw_id; - char hw_id_str[52]; - - int nvm_device_type; - bool pm_support; - - wait_queue_head_t wait_command_queue; - - /* pointer to trans specific struct */ - /*Ensure that this pointer will always be aligned to sizeof pointer */ - char trans_specific[0] __aligned(sizeof(void *)); -}; - -static inline void iwl_trans_configure(struct iwl_trans *trans, - const struct iwl_trans_config *trans_cfg) -{ - /* - * only set the op_mode for the moment. Later on, this function will do - * more - */ - trans->op_mode = trans_cfg->op_mode; - - trans->ops->configure(trans, trans_cfg); -} - -static inline int iwl_trans_start_hw(struct iwl_trans *trans) -{ - might_sleep(); - - return trans->ops->start_hw(trans); -} - -static inline void iwl_trans_stop_hw(struct iwl_trans *trans) -{ - might_sleep(); - - trans->ops->stop_hw(trans); - - trans->state = IWL_TRANS_NO_FW; -} - -static inline void iwl_trans_fw_alive(struct iwl_trans *trans) -{ - might_sleep(); - - trans->ops->fw_alive(trans); - - trans->state = IWL_TRANS_FW_ALIVE; -} - -static inline int iwl_trans_start_fw(struct iwl_trans *trans, - const struct fw_img *fw) -{ - might_sleep(); - - return trans->ops->start_fw(trans, fw); -} - -static inline void iwl_trans_stop_device(struct iwl_trans *trans) -{ - might_sleep(); - - trans->ops->stop_device(trans); - - trans->state = IWL_TRANS_NO_FW; -} - -static inline void iwl_trans_wowlan_suspend(struct iwl_trans *trans) -{ - might_sleep(); - trans->ops->wowlan_suspend(trans); -} - -static inline int iwl_trans_send_cmd(struct iwl_trans *trans, - struct iwl_host_cmd *cmd) -{ - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - return trans->ops->send_cmd(trans, cmd); -} - -static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb, - struct iwl_device_cmd *dev_cmd, enum iwl_rxon_context_id ctx, - u8 sta_id, u8 tid) -{ - if (trans->state != IWL_TRANS_FW_ALIVE) - IWL_ERR(trans, "%s bad state = %d", __func__, trans->state); - - return trans->ops->tx(trans, skb, dev_cmd, ctx, sta_id, tid); -} - -static inline int iwl_trans_reclaim(struct iwl_trans *trans, int sta_id, - int tid, int txq_id, int ssn, - struct sk_buff_head *skbs) -{ - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - return trans->ops->reclaim(trans, sta_id, tid, txq_id, ssn, skbs); -} - -static inline int iwl_trans_tx_agg_disable(struct iwl_trans *trans, - int sta_id, int tid) -{ - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - return trans->ops->tx_agg_disable(trans, sta_id, tid); -} - -static inline int iwl_trans_tx_agg_alloc(struct iwl_trans *trans, - int sta_id, int tid) -{ - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - return trans->ops->tx_agg_alloc(trans, sta_id, tid); -} - - -static inline void iwl_trans_tx_agg_setup(struct iwl_trans *trans, - enum iwl_rxon_context_id ctx, - int sta_id, int tid, - int frame_limit, u16 ssn) -{ - might_sleep(); - - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - trans->ops->tx_agg_setup(trans, ctx, sta_id, tid, frame_limit, ssn); -} - -static inline void iwl_trans_free(struct iwl_trans *trans) -{ - trans->ops->free(trans); -} - -static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans) -{ - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - return trans->ops->wait_tx_queue_empty(trans); -} - -static inline int iwl_trans_check_stuck_queue(struct iwl_trans *trans, int q) -{ - WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE, - "%s bad state = %d", __func__, trans->state); - - return trans->ops->check_stuck_queue(trans, q); -} -static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans, - struct dentry *dir) -{ - return trans->ops->dbgfs_register(trans, dir); -} - -#ifdef CONFIG_PM_SLEEP -static inline int iwl_trans_suspend(struct iwl_trans *trans) -{ - return trans->ops->suspend(trans); -} - -static inline int iwl_trans_resume(struct iwl_trans *trans) -{ - return trans->ops->resume(trans); -} -#endif - -static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) -{ - trans->ops->write8(trans, ofs, val); -} - -static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val) -{ - trans->ops->write32(trans, ofs, val); -} - -static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs) -{ - return trans->ops->read32(trans, ofs); -} - -/***************************************************** -* Transport layers implementations + their allocation function -******************************************************/ -struct pci_dev; -struct pci_device_id; -extern const struct iwl_trans_ops trans_ops_pcie; -struct iwl_trans *iwl_trans_pcie_alloc(struct iwl_shared *shrd, - struct pci_dev *pdev, - const struct pci_device_id *ent); -int __must_check iwl_pci_register_driver(void); -void iwl_pci_unregister_driver(void); - -extern const struct iwl_trans_ops trans_ops_idi; -struct iwl_trans *iwl_trans_idi_alloc(struct iwl_shared *shrd, - void *pdev_void, - const void *ent_void); -#endif /* __iwl_trans_h__ */ diff --git a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-ucode.c b/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-ucode.c deleted file mode 100644 index 25282872..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/iwlwifi/iwl-ucode.c +++ /dev/null @@ -1,568 +0,0 @@ -/****************************************************************************** - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, - * USA - * - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Linux Wireless <ilw@linux.intel.com> - * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - * - *****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/init.h> - -#include "iwl-dev.h" -#include "iwl-core.h" -#include "iwl-io.h" -#include "iwl-agn-hw.h" -#include "iwl-agn.h" -#include "iwl-agn-calib.h" -#include "iwl-trans.h" -#include "iwl-fh.h" -#include "iwl-op-mode.h" - -static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = { - {COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP, - 0, COEX_UNASSOC_IDLE_FLAGS}, - {COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP, - 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS}, - {COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP, - 0, COEX_UNASSOC_AUTO_SCAN_FLAGS}, - {COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP, - 0, COEX_CALIBRATION_FLAGS}, - {COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP, - 0, COEX_PERIODIC_CALIBRATION_FLAGS}, - {COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP, - 0, COEX_CONNECTION_ESTAB_FLAGS}, - {COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP, - 0, COEX_ASSOCIATED_IDLE_FLAGS}, - {COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP, - 0, COEX_ASSOC_MANUAL_SCAN_FLAGS}, - {COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP, - 0, COEX_ASSOC_AUTO_SCAN_FLAGS}, - {COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP, - 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS}, - {COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS}, - {COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS}, - {COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP, - 0, COEX_STAND_ALONE_DEBUG_FLAGS}, - {COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP, - 0, COEX_IPAN_ASSOC_LEVEL_FLAGS}, - {COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS}, - {COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS} -}; - -/****************************************************************************** - * - * uCode download functions - * - ******************************************************************************/ - -static inline const struct fw_img * -iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type) -{ - if (ucode_type >= IWL_UCODE_TYPE_MAX) - return NULL; - - return &priv->fw->img[ucode_type]; -} - -/* - * Calibration - */ -static int iwl_set_Xtal_calib(struct iwl_priv *priv) -{ - struct iwl_calib_xtal_freq_cmd cmd; - __le16 *xtal_calib = - (__le16 *)iwl_eeprom_query_addr(priv->shrd, EEPROM_XTAL); - - iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD); - cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]); - cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]); - return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd)); -} - -static int iwl_set_temperature_offset_calib(struct iwl_priv *priv) -{ - struct iwl_calib_temperature_offset_cmd cmd; - __le16 *offset_calib = - (__le16 *)iwl_eeprom_query_addr(priv->shrd, - EEPROM_RAW_TEMPERATURE); - - memset(&cmd, 0, sizeof(cmd)); - iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); - memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib)); - if (!(cmd.radio_sensor_offset)) - cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET; - - IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n", - le16_to_cpu(cmd.radio_sensor_offset)); - return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd)); -} - -static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv) -{ - struct iwl_calib_temperature_offset_v2_cmd cmd; - __le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(priv->shrd, - EEPROM_KELVIN_TEMPERATURE); - __le16 *offset_calib_low = - (__le16 *)iwl_eeprom_query_addr(priv->shrd, - EEPROM_RAW_TEMPERATURE); - struct iwl_eeprom_calib_hdr *hdr; - - memset(&cmd, 0, sizeof(cmd)); - iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); - hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv->shrd, - EEPROM_CALIB_ALL); - memcpy(&cmd.radio_sensor_offset_high, offset_calib_high, - sizeof(*offset_calib_high)); - memcpy(&cmd.radio_sensor_offset_low, offset_calib_low, - sizeof(*offset_calib_low)); - if (!(cmd.radio_sensor_offset_low)) { - IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n"); - cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET; - cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET; - } - memcpy(&cmd.burntVoltageRef, &hdr->voltage, - sizeof(hdr->voltage)); - - IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n", - le16_to_cpu(cmd.radio_sensor_offset_high)); - IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n", - le16_to_cpu(cmd.radio_sensor_offset_low)); - IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n", - le16_to_cpu(cmd.burntVoltageRef)); - - return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd)); -} - -static int iwl_send_calib_cfg(struct iwl_priv *priv) -{ - struct iwl_calib_cfg_cmd calib_cfg_cmd; - struct iwl_host_cmd cmd = { - .id = CALIBRATION_CFG_CMD, - .len = { sizeof(struct iwl_calib_cfg_cmd), }, - .data = { &calib_cfg_cmd, }, - }; - - memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd)); - calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL; - calib_cfg_cmd.ucd_calib_cfg.flags = - IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK; - - return iwl_dvm_send_cmd(priv, &cmd); -} - -int iwlagn_rx_calib_result(struct iwl_priv *priv, - struct iwl_rx_cmd_buffer *rxb, - struct iwl_device_cmd *cmd) -{ - struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->data; - int len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; - - /* reduce the size of the length field itself */ - len -= 4; - - if (iwl_calib_set(priv, hdr, len)) - IWL_ERR(priv, "Failed to record calibration data %d\n", - hdr->op_code); - - return 0; -} - -int iwl_init_alive_start(struct iwl_priv *priv) -{ - int ret; - - if (cfg(priv)->bt_params && - cfg(priv)->bt_params->advanced_bt_coexist) { - /* - * Tell uCode we are ready to perform calibration - * need to perform this before any calibration - * no need to close the envlope since we are going - * to load the runtime uCode later. - */ - ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN, - BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); - if (ret) - return ret; - - } - - ret = iwl_send_calib_cfg(priv); - if (ret) - return ret; - - /** - * temperature offset calibration is only needed for runtime ucode, - * so prepare the value now. - */ - if (cfg(priv)->need_temp_offset_calib) { - if (cfg(priv)->temp_offset_v2) - return iwl_set_temperature_offset_calib_v2(priv); - else - return iwl_set_temperature_offset_calib(priv); - } - - return 0; -} - -static int iwl_send_wimax_coex(struct iwl_priv *priv) -{ - struct iwl_wimax_coex_cmd coex_cmd; - - if (cfg(priv)->base_params->support_wimax_coexist) { - /* UnMask wake up src at associated sleep */ - coex_cmd.flags = COEX_FLAGS_ASSOC_WA_UNMASK_MSK; - - /* UnMask wake up src at unassociated sleep */ - coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK; - memcpy(coex_cmd.sta_prio, cu_priorities, - sizeof(struct iwl_wimax_coex_event_entry) * - COEX_NUM_OF_EVENTS); - - /* enabling the coexistence feature */ - coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK; - - /* enabling the priorities tables */ - coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK; - } else { - /* coexistence is disabled */ - memset(&coex_cmd, 0, sizeof(coex_cmd)); - } - return iwl_dvm_send_cmd_pdu(priv, - COEX_PRIORITY_TABLE_CMD, CMD_SYNC, - sizeof(coex_cmd), &coex_cmd); -} - -static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = { - ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - ((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) | - (0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)), - 0, 0, 0, 0, 0, 0, 0 -}; - -void iwl_send_prio_tbl(struct iwl_priv *priv) -{ - struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd; - - memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl, - sizeof(iwl_bt_prio_tbl)); - if (iwl_dvm_send_cmd_pdu(priv, - REPLY_BT_COEX_PRIO_TABLE, CMD_SYNC, - sizeof(prio_tbl_cmd), &prio_tbl_cmd)) - IWL_ERR(priv, "failed to send BT prio tbl command\n"); -} - -int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type) -{ - struct iwl_bt_coex_prot_env_cmd env_cmd; - int ret; - - env_cmd.action = action; - env_cmd.type = type; - ret = iwl_dvm_send_cmd_pdu(priv, - REPLY_BT_COEX_PROT_ENV, CMD_SYNC, - sizeof(env_cmd), &env_cmd); - if (ret) - IWL_ERR(priv, "failed to send BT env command\n"); - return ret; -} - - -static int iwl_alive_notify(struct iwl_priv *priv) -{ - int ret; - - iwl_trans_fw_alive(trans(priv)); - - priv->passive_no_rx = false; - priv->transport_queue_stop = 0; - - ret = iwl_send_wimax_coex(priv); - if (ret) - return ret; - - if (!cfg(priv)->no_xtal_calib) { - ret = iwl_set_Xtal_calib(priv); - if (ret) - return ret; - } - - return iwl_send_calib_results(priv); -} - - -/** - * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl_verify_sec_sparse(struct iwl_priv *priv, - const struct fw_desc *fw_desc) -{ - __le32 *image = (__le32 *)fw_desc->v_addr; - u32 len = fw_desc->len; - u32 val; - u32 i; - - IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(trans(priv), HBUS_TARG_MEM_RADDR, - i + fw_desc->offset); - val = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) - return -EIO; - } - - return 0; -} - -static void iwl_print_mismatch_sec(struct iwl_priv *priv, - const struct fw_desc *fw_desc) -{ - __le32 *image = (__le32 *)fw_desc->v_addr; - u32 len = fw_desc->len; - u32 val; - u32 offs; - int errors = 0; - - IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); - - iwl_write_direct32(trans(priv), HBUS_TARG_MEM_RADDR, - fw_desc->offset); - - for (offs = 0; - offs < len && errors < 20; - offs += sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - val = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "uCode INST section at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - offs, val, le32_to_cpu(*image)); - errors++; - } - } -} - -/** - * iwl_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl_verify_ucode(struct iwl_priv *priv, - enum iwl_ucode_type ucode_type) -{ - const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type); - - if (!img) { - IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type); - return -EINVAL; - } - - if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) { - IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n"); - - iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]); - return -EIO; -} - -struct iwl_alive_data { - bool valid; - u8 subtype; -}; - -static void iwl_alive_fn(struct iwl_notif_wait_data *notif_wait, - struct iwl_rx_packet *pkt, - void *data) -{ - struct iwl_priv *priv = - container_of(notif_wait, struct iwl_priv, notif_wait); - struct iwl_alive_data *alive_data = data; - struct iwl_alive_resp *palive; - - palive = (void *)pkt->data; - - IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision " - "0x%01X 0x%01X\n", - palive->is_valid, palive->ver_type, - palive->ver_subtype); - - priv->shrd->device_pointers.error_event_table = - le32_to_cpu(palive->error_event_table_ptr); - priv->shrd->device_pointers.log_event_table = - le32_to_cpu(palive->log_event_table_ptr); - - alive_data->subtype = palive->ver_subtype; - alive_data->valid = palive->is_valid == UCODE_VALID_OK; -} - -#define UCODE_ALIVE_TIMEOUT HZ -#define UCODE_CALIB_TIMEOUT (2*HZ) - -int iwl_load_ucode_wait_alive(struct iwl_priv *priv, - enum iwl_ucode_type ucode_type) -{ - struct iwl_notification_wait alive_wait; - struct iwl_alive_data alive_data; - const struct fw_img *fw; - int ret; - enum iwl_ucode_type old_type; - - old_type = priv->shrd->ucode_type; - priv->shrd->ucode_type = ucode_type; - fw = iwl_get_ucode_image(priv, ucode_type); - - priv->ucode_loaded = false; - - if (!fw) - return -EINVAL; - - iwl_init_notification_wait(&priv->notif_wait, &alive_wait, REPLY_ALIVE, - iwl_alive_fn, &alive_data); - - ret = iwl_trans_start_fw(trans(priv), fw); - if (ret) { - priv->shrd->ucode_type = old_type; - iwl_remove_notification(&priv->notif_wait, &alive_wait); - return ret; - } - - /* - * Some things may run in the background now, but we - * just wait for the ALIVE notification here. - */ - ret = iwl_wait_notification(&priv->notif_wait, &alive_wait, - UCODE_ALIVE_TIMEOUT); - if (ret) { - priv->shrd->ucode_type = old_type; - return ret; - } - - if (!alive_data.valid) { - IWL_ERR(priv, "Loaded ucode is not valid!\n"); - priv->shrd->ucode_type = old_type; - return -EIO; - } - - /* - * This step takes a long time (60-80ms!!) and - * WoWLAN image should be loaded quickly, so - * skip it for WoWLAN. - */ - if (ucode_type != IWL_UCODE_WOWLAN) { - ret = iwl_verify_ucode(priv, ucode_type); - if (ret) { - priv->shrd->ucode_type = old_type; - return ret; - } - - /* delay a bit to give rfkill time to run */ - msleep(5); - } - - ret = iwl_alive_notify(priv); - if (ret) { - IWL_WARN(priv, - "Could not complete ALIVE transition: %d\n", ret); - priv->shrd->ucode_type = old_type; - return ret; - } - - priv->ucode_loaded = true; - - return 0; -} - -int iwl_run_init_ucode(struct iwl_priv *priv) -{ - struct iwl_notification_wait calib_wait; - int ret; - - lockdep_assert_held(&priv->mutex); - - /* No init ucode required? Curious, but maybe ok */ - if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len) - return 0; - - if (priv->init_ucode_run) - return 0; - - iwl_init_notification_wait(&priv->notif_wait, &calib_wait, - CALIBRATION_COMPLETE_NOTIFICATION, - NULL, NULL); - - /* Will also start the device */ - ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT); - if (ret) - goto error; - - ret = iwl_init_alive_start(priv); - if (ret) - goto error; - - /* - * Some things may run in the background now, but we - * just wait for the calibration complete notification. - */ - ret = iwl_wait_notification(&priv->notif_wait, &calib_wait, - UCODE_CALIB_TIMEOUT); - if (!ret) - priv->init_ucode_run = true; - - goto out; - - error: - iwl_remove_notification(&priv->notif_wait, &calib_wait); - out: - /* Whatever happened, stop the device */ - iwl_trans_stop_device(trans(priv)); - priv->ucode_loaded = false; - - return ret; -} |