diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/bcmdhd/include/bcmsdspi.h')
| -rw-r--r-- | ANDROID_3.4.5/drivers/net/wireless/bcmdhd/include/bcmsdspi.h | 135 |
1 files changed, 0 insertions, 135 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd/include/bcmsdspi.h b/ANDROID_3.4.5/drivers/net/wireless/bcmdhd/include/bcmsdspi.h deleted file mode 100644 index 3d444f3b..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd/include/bcmsdspi.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * SD-SPI Protocol Conversion - BCMSDH->SPI Translation Layer - * - * Copyright (C) 1999-2012, Broadcom Corporation - * - * Unless you and Broadcom execute a separate written software license - * agreement governing use of this software, this software is licensed to you - * under the terms of the GNU General Public License version 2 (the "GPL"), - * available at http://www.broadcom.com/licenses/GPLv2.php, with the - * following added to such license: - * - * As a special exception, the copyright holders of this software give you - * permission to link this software with independent modules, and to copy and - * distribute the resulting executable under terms of your choice, provided that - * you also meet, for each linked independent module, the terms and conditions of - * the license of that module. An independent module is a module which is not - * derived from this software. The special exception does not apply to any - * modifications of the software. - * - * Notwithstanding the above, under no circumstances may you combine this - * software in any way with any other Broadcom software provided under a license - * other than the GPL, without Broadcom's express prior written consent. - * - * $Id: bcmsdspi.h 294363 2011-11-06 23:02:20Z $ - */ -#ifndef _BCM_SD_SPI_H -#define _BCM_SD_SPI_H - -/* global msglevel for debug messages - bitvals come from sdiovar.h */ - -#define sd_err(x) -#define sd_trace(x) -#define sd_info(x) -#define sd_debug(x) -#define sd_data(x) -#define sd_ctrl(x) - -#define sd_log(x) - -#define SDIOH_ASSERT(exp) \ - do { if (!(exp)) \ - printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \ - } while (0) - -#define BLOCK_SIZE_4318 64 -#define BLOCK_SIZE_4328 512 - -/* internal return code */ -#define SUCCESS 0 -#undef ERROR -#define ERROR 1 - -/* private bus modes */ -#define SDIOH_MODE_SPI 0 - -#define USE_BLOCKMODE 0x2 /* Block mode can be single block or multi */ -#define USE_MULTIBLOCK 0x4 - -struct sdioh_info { - uint cfg_bar; /* pci cfg address for bar */ - uint32 caps; /* cached value of capabilities reg */ - uint bar0; /* BAR0 for PCI Device */ - osl_t *osh; /* osh handler */ - void *controller; /* Pointer to SPI Controller's private data struct */ - - uint lockcount; /* nest count of sdspi_lock() calls */ - bool client_intr_enabled; /* interrupt connnected flag */ - bool intr_handler_valid; /* client driver interrupt handler valid */ - sdioh_cb_fn_t intr_handler; /* registered interrupt handler */ - void *intr_handler_arg; /* argument to call interrupt handler */ - bool initialized; /* card initialized */ - uint32 target_dev; /* Target device ID */ - uint32 intmask; /* Current active interrupts */ - void *sdos_info; /* Pointer to per-OS private data */ - - uint32 controller_type; /* Host controller type */ - uint8 version; /* Host Controller Spec Compliance Version */ - uint irq; /* Client irq */ - uint32 intrcount; /* Client interrupts */ - uint32 local_intrcount; /* Controller interrupts */ - bool host_init_done; /* Controller initted */ - bool card_init_done; /* Client SDIO interface initted */ - bool polled_mode; /* polling for command completion */ - - bool sd_use_dma; /* DMA on CMD53 */ - bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */ - /* Must be on for sd_multiblock to be effective */ - bool use_client_ints; /* If this is false, make sure to restore */ - bool got_hcint; /* Host Controller interrupt. */ - /* polling hack in wl_linux.c:wl_timer() */ - int adapter_slot; /* Maybe dealing with multiple slots/controllers */ - int sd_mode; /* SD1/SD4/SPI */ - int client_block_size[SDIOD_MAX_IOFUNCS]; /* Blocksize */ - uint32 data_xfer_count; /* Current register transfer size */ - uint32 cmd53_wr_data; /* Used to pass CMD53 write data */ - uint32 card_response; /* Used to pass back response status byte */ - uint32 card_rsp_data; /* Used to pass back response data word */ - uint16 card_rca; /* Current Address */ - uint8 num_funcs; /* Supported funcs on client */ - uint32 com_cis_ptr; - uint32 func_cis_ptr[SDIOD_MAX_IOFUNCS]; - void *dma_buf; - ulong dma_phys; - int r_cnt; /* rx count */ - int t_cnt; /* tx_count */ -}; - -/************************************************************ - * Internal interfaces: per-port references into bcmsdspi.c - */ - -/* Global message bits */ -extern uint sd_msglevel; - -/************************************************************** - * Internal interfaces: bcmsdspi.c references to per-port code - */ - -/* Register mapping routines */ -extern uint32 *spi_reg_map(osl_t *osh, uintptr addr, int size); -extern void spi_reg_unmap(osl_t *osh, uintptr addr, int size); - -/* Interrupt (de)registration routines */ -extern int spi_register_irq(sdioh_info_t *sd, uint irq); -extern void spi_free_irq(uint irq, sdioh_info_t *sd); - -/* OS-specific interrupt wrappers (atomic interrupt enable/disable) */ -extern void spi_lock(sdioh_info_t *sd); -extern void spi_unlock(sdioh_info_t *sd); - -/* Allocate/init/free per-OS private data */ -extern int spi_osinit(sdioh_info_t *sd); -extern void spi_osfree(sdioh_info_t *sd); - -#endif /* _BCM_SD_SPI_H */ |