diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmsdpcm.h')
| -rwxr-xr-x | ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmsdpcm.h | 281 |
1 files changed, 0 insertions, 281 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmsdpcm.h b/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmsdpcm.h deleted file mode 100755 index fb2ec3af..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/include/bcmsdpcm.h +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Broadcom SDIO/PCMCIA - * Software-specific definitions shared between device and host side - * - * Copyright (C) 1999-2012, Broadcom Corporation - * - * Unless you and Broadcom execute a separate written software license - * agreement governing use of this software, this software is licensed to you - * under the terms of the GNU General Public License version 2 (the "GPL"), - * available at http://www.broadcom.com/licenses/GPLv2.php, with the - * following added to such license: - * - * As a special exception, the copyright holders of this software give you - * permission to link this software with independent modules, and to copy and - * distribute the resulting executable under terms of your choice, provided that - * you also meet, for each linked independent module, the terms and conditions of - * the license of that module. An independent module is a module which is not - * derived from this software. The special exception does not apply to any - * modifications of the software. - * - * Notwithstanding the above, under no circumstances may you combine this - * software in any way with any other Broadcom software provided under a license - * other than the GPL, without Broadcom's express prior written consent. - * - * $Id: bcmsdpcm.h 362722 2012-10-12 23:55:55Z $ - */ - -#ifndef _bcmsdpcm_h_ -#define _bcmsdpcm_h_ - -/* - * Software allocation of To SB Mailbox resources - */ - -/* intstatus bits */ -#define I_SMB_NAK I_SMB_SW0 /* To SB Mailbox Frame NAK */ -#define I_SMB_INT_ACK I_SMB_SW1 /* To SB Mailbox Host Interrupt ACK */ -#define I_SMB_USE_OOB I_SMB_SW2 /* To SB Mailbox Use OOB Wakeup */ -#define I_SMB_DEV_INT I_SMB_SW3 /* To SB Mailbox Miscellaneous Interrupt */ - -#define I_TOSBMAIL (I_SMB_NAK | I_SMB_INT_ACK | I_SMB_USE_OOB | I_SMB_DEV_INT) - -/* tosbmailbox bits corresponding to intstatus bits */ -#define SMB_NAK (1 << 0) /* To SB Mailbox Frame NAK */ -#define SMB_INT_ACK (1 << 1) /* To SB Mailbox Host Interrupt ACK */ -#define SMB_USE_OOB (1 << 2) /* To SB Mailbox Use OOB Wakeup */ -#define SMB_DEV_INT (1 << 3) /* To SB Mailbox Miscellaneous Interrupt */ -#define SMB_MASK 0x0000000f /* To SB Mailbox Mask */ - -/* tosbmailboxdata */ -#define SMB_DATA_VERSION_MASK 0x00ff0000 /* host protocol version (sent with F2 enable) */ -#define SMB_DATA_VERSION_SHIFT 16 /* host protocol version (sent with F2 enable) */ - -/* - * Software allocation of To Host Mailbox resources - */ - -/* intstatus bits */ -#define I_HMB_FC_STATE I_HMB_SW0 /* To Host Mailbox Flow Control State */ -#define I_HMB_FC_CHANGE I_HMB_SW1 /* To Host Mailbox Flow Control State Changed */ -#define I_HMB_FRAME_IND I_HMB_SW2 /* To Host Mailbox Frame Indication */ -#define I_HMB_HOST_INT I_HMB_SW3 /* To Host Mailbox Miscellaneous Interrupt */ - -#define I_TOHOSTMAIL (I_HMB_FC_CHANGE | I_HMB_FRAME_IND | I_HMB_HOST_INT) - -/* tohostmailbox bits corresponding to intstatus bits */ -#define HMB_FC_ON (1 << 0) /* To Host Mailbox Flow Control State */ -#define HMB_FC_CHANGE (1 << 1) /* To Host Mailbox Flow Control State Changed */ -#define HMB_FRAME_IND (1 << 2) /* To Host Mailbox Frame Indication */ -#define HMB_HOST_INT (1 << 3) /* To Host Mailbox Miscellaneous Interrupt */ -#define HMB_MASK 0x0000000f /* To Host Mailbox Mask */ - -/* tohostmailboxdata */ -#define HMB_DATA_NAKHANDLED 0x01 /* we're ready to retransmit NAK'd frame to host */ -#define HMB_DATA_DEVREADY 0x02 /* we're ready to to talk to host after enable */ -#define HMB_DATA_FC 0x04 /* per prio flowcontrol update flag to host */ -#define HMB_DATA_FWREADY 0x08 /* firmware is ready for protocol activity */ -#define HMB_DATA_FWHALT 0x10 /* firmware has halted operation */ - -#define HMB_DATA_FCDATA_MASK 0xff000000 /* per prio flowcontrol data */ -#define HMB_DATA_FCDATA_SHIFT 24 /* per prio flowcontrol data */ - -#define HMB_DATA_VERSION_MASK 0x00ff0000 /* device protocol version (with devready) */ -#define HMB_DATA_VERSION_SHIFT 16 /* device protocol version (with devready) */ - -/* - * Software-defined protocol header - */ - -/* Current protocol version */ -#define SDPCM_PROT_VERSION 4 - -/* SW frame header */ -#define SDPCM_SEQUENCE_MASK 0x000000ff /* Sequence Number Mask */ -#define SDPCM_PACKET_SEQUENCE(p) (((uint8 *)p)[0] & 0xff) /* p starts w/SW Header */ - -#define SDPCM_CHANNEL_MASK 0x00000f00 /* Channel Number Mask */ -#define SDPCM_CHANNEL_SHIFT 8 /* Channel Number Shift */ -#define SDPCM_PACKET_CHANNEL(p) (((uint8 *)p)[1] & 0x0f) /* p starts w/SW Header */ - -#define SDPCM_FLAGS_MASK 0x0000f000 /* Mask of flag bits */ -#define SDPCM_FLAGS_SHIFT 12 /* Flag bits shift */ -#define SDPCM_PACKET_FLAGS(p) ((((uint8 *)p)[1] & 0xf0) >> 4) /* p starts w/SW Header */ - -/* Next Read Len: lookahead length of next frame, in 16-byte units (rounded up) */ -#define SDPCM_NEXTLEN_MASK 0x00ff0000 /* Next Read Len Mask */ -#define SDPCM_NEXTLEN_SHIFT 16 /* Next Read Len Shift */ -#define SDPCM_NEXTLEN_VALUE(p) ((((uint8 *)p)[2] & 0xff) << 4) /* p starts w/SW Header */ -#define SDPCM_NEXTLEN_OFFSET 2 - -/* Data Offset from SOF (HW Tag, SW Tag, Pad) */ -#define SDPCM_DOFFSET_OFFSET 3 /* Data Offset */ -#define SDPCM_DOFFSET_VALUE(p) (((uint8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff) -#define SDPCM_DOFFSET_MASK 0xff000000 -#define SDPCM_DOFFSET_SHIFT 24 - -#define SDPCM_FCMASK_OFFSET 4 /* Flow control */ -#define SDPCM_FCMASK_VALUE(p) (((uint8 *)p)[SDPCM_FCMASK_OFFSET ] & 0xff) -#define SDPCM_WINDOW_OFFSET 5 /* Credit based fc */ -#define SDPCM_WINDOW_VALUE(p) (((uint8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff) -#define SDPCM_VERSION_OFFSET 6 /* Version # */ -#define SDPCM_VERSION_VALUE(p) (((uint8 *)p)[SDPCM_VERSION_OFFSET] & 0xff) -#define SDPCM_UNUSED_OFFSET 7 /* Spare */ -#define SDPCM_UNUSED_VALUE(p) (((uint8 *)p)[SDPCM_UNUSED_OFFSET] & 0xff) - -#define SDPCM_SWHEADER_LEN 8 /* SW header is 64 bits */ - -/* logical channel numbers */ -#define SDPCM_CONTROL_CHANNEL 0 /* Control Request/Response Channel Id */ -#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication Channel Id */ -#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv Channel Id */ -#define SDPCM_GLOM_CHANNEL 3 /* For coalesced packets (superframes) */ -#define SDPCM_TEST_CHANNEL 15 /* Reserved for test/debug packets */ -#define SDPCM_MAX_CHANNEL 15 - -#define SDPCM_SEQUENCE_WRAP 256 /* wrap-around val for eight-bit frame seq number */ - -#define SDPCM_FLAG_RESVD0 0x01 -#define SDPCM_FLAG_RESVD1 0x02 -#define SDPCM_FLAG_GSPI_TXENAB 0x04 -#define SDPCM_FLAG_GLOMDESC 0x08 /* Superframe descriptor mask */ - -/* For GLOM_CHANNEL frames, use a flag to indicate descriptor frame */ -#define SDPCM_GLOMDESC_FLAG (SDPCM_FLAG_GLOMDESC << SDPCM_FLAGS_SHIFT) - -#define SDPCM_GLOMDESC(p) (((uint8 *)p)[1] & 0x80) - -/* For TEST_CHANNEL packets, define another 4-byte header */ -#define SDPCM_TEST_HDRLEN 4 /* Generally: Cmd(1), Ext(1), Len(2); - * Semantics of Ext byte depend on command. - * Len is current or requested frame length, not - * including test header; sent little-endian. - */ -#define SDPCM_TEST_PKT_CNT_FLD_LEN 4 /* Packet count filed legth */ -#define SDPCM_TEST_DISCARD 0x01 /* Receiver discards. Ext is a pattern id. */ -#define SDPCM_TEST_ECHOREQ 0x02 /* Echo request. Ext is a pattern id. */ -#define SDPCM_TEST_ECHORSP 0x03 /* Echo response. Ext is a pattern id. */ -#define SDPCM_TEST_BURST 0x04 /* Receiver to send a burst. Ext is a frame count - * (Backward compatabilty) Set frame count in a - * 4 byte filed adjacent to the HDR - */ -#define SDPCM_TEST_SEND 0x05 /* Receiver sets send mode. Ext is boolean on/off - * Set frame count in a 4 byte filed adjacent to - * the HDR - */ - -/* Handy macro for filling in datagen packets with a pattern */ -#define SDPCM_TEST_FILL(byteno, id) ((uint8)(id + byteno)) - -/* - * Software counters (first part matches hardware counters) - */ - -typedef volatile struct { - uint32 cmd52rd; /* Cmd52RdCount, SDIO: cmd52 reads */ - uint32 cmd52wr; /* Cmd52WrCount, SDIO: cmd52 writes */ - uint32 cmd53rd; /* Cmd53RdCount, SDIO: cmd53 reads */ - uint32 cmd53wr; /* Cmd53WrCount, SDIO: cmd53 writes */ - uint32 abort; /* AbortCount, SDIO: aborts */ - uint32 datacrcerror; /* DataCrcErrorCount, SDIO: frames w/CRC error */ - uint32 rdoutofsync; /* RdOutOfSyncCount, SDIO/PCMCIA: Rd Frm out of sync */ - uint32 wroutofsync; /* RdOutOfSyncCount, SDIO/PCMCIA: Wr Frm out of sync */ - uint32 writebusy; /* WriteBusyCount, SDIO: device asserted "busy" */ - uint32 readwait; /* ReadWaitCount, SDIO: no data ready for a read cmd */ - uint32 readterm; /* ReadTermCount, SDIO: read frame termination cmds */ - uint32 writeterm; /* WriteTermCount, SDIO: write frames termination cmds */ - uint32 rxdescuflo; /* receive descriptor underflows */ - uint32 rxfifooflo; /* receive fifo overflows */ - uint32 txfifouflo; /* transmit fifo underflows */ - uint32 runt; /* runt (too short) frames recv'd from bus */ - uint32 badlen; /* frame's rxh len does not match its hw tag len */ - uint32 badcksum; /* frame's hw tag chksum doesn't agree with len value */ - uint32 seqbreak; /* break in sequence # space from one rx frame to the next */ - uint32 rxfcrc; /* frame rx header indicates crc error */ - uint32 rxfwoos; /* frame rx header indicates write out of sync */ - uint32 rxfwft; /* frame rx header indicates write frame termination */ - uint32 rxfabort; /* frame rx header indicates frame aborted */ - uint32 woosint; /* write out of sync interrupt */ - uint32 roosint; /* read out of sync interrupt */ - uint32 rftermint; /* read frame terminate interrupt */ - uint32 wftermint; /* write frame terminate interrupt */ -} sdpcmd_cnt_t; - -/* - * Register Access Macros - */ - -#define SDIODREV_IS(var, val) ((var) == (val)) -#define SDIODREV_GE(var, val) ((var) >= (val)) -#define SDIODREV_GT(var, val) ((var) > (val)) -#define SDIODREV_LT(var, val) ((var) < (val)) -#define SDIODREV_LE(var, val) ((var) <= (val)) - -#define SDIODDMAREG32(h, dir, chnl) \ - ((dir) == DMA_TX ? \ - (void *)(uintptr)&((h)->regs->dma.sdiod32.dma32regs[chnl].xmt) : \ - (void *)(uintptr)&((h)->regs->dma.sdiod32.dma32regs[chnl].rcv)) - -#define SDIODDMAREG64(h, dir, chnl) \ - ((dir) == DMA_TX ? \ - (void *)(uintptr)&((h)->regs->dma.sdiod64.dma64regs[chnl].xmt) : \ - (void *)(uintptr)&((h)->regs->dma.sdiod64.dma64regs[chnl].rcv)) - -#define SDIODDMAREG(h, dir, chnl) \ - (SDIODREV_LT((h)->corerev, 1) ? \ - SDIODDMAREG32((h), (dir), (chnl)) : \ - SDIODDMAREG64((h), (dir), (chnl))) - -#define PCMDDMAREG(h, dir, chnl) \ - ((dir) == DMA_TX ? \ - (void *)(uintptr)&((h)->regs->dma.pcm32.dmaregs.xmt) : \ - (void *)(uintptr)&((h)->regs->dma.pcm32.dmaregs.rcv)) - -#define SDPCMDMAREG(h, dir, chnl, coreid) \ - ((coreid) == SDIOD_CORE_ID ? \ - SDIODDMAREG(h, dir, chnl) : \ - PCMDDMAREG(h, dir, chnl)) - -#define SDIODFIFOREG(h, corerev) \ - (SDIODREV_LT((corerev), 1) ? \ - ((dma32diag_t *)(uintptr)&((h)->regs->dma.sdiod32.dmafifo)) : \ - ((dma32diag_t *)(uintptr)&((h)->regs->dma.sdiod64.dmafifo))) - -#define PCMDFIFOREG(h) \ - ((dma32diag_t *)(uintptr)&((h)->regs->dma.pcm32.dmafifo)) - -#define SDPCMFIFOREG(h, coreid, corerev) \ - ((coreid) == SDIOD_CORE_ID ? \ - SDIODFIFOREG(h, corerev) : \ - PCMDFIFOREG(h)) - -/* - * Shared structure between dongle and the host. - * The structure contains pointers to trap or assert information. - */ -#define SDPCM_SHARED_VERSION 0x0001 -#define SDPCM_SHARED_VERSION_MASK 0x00FF -#define SDPCM_SHARED_ASSERT_BUILT 0x0100 -#define SDPCM_SHARED_ASSERT 0x0200 -#define SDPCM_SHARED_TRAP 0x0400 -#define SDPCM_SHARED_IN_BRPT 0x0800 -#define SDPCM_SHARED_SET_BRPT 0x1000 -#define SDPCM_SHARED_PENDING_BRPT 0x2000 - -typedef struct { - uint32 flags; - uint32 trap_addr; - uint32 assert_exp_addr; - uint32 assert_file_addr; - uint32 assert_line; - uint32 console_addr; /* Address of hndrte_cons_t */ - uint32 msgtrace_addr; - uint32 brpt_addr; -} sdpcm_shared_t; - -extern sdpcm_shared_t sdpcm_shared; - -/* Function can be used to notify host of FW halt */ -extern void sdpcmd_fwhalt(void); - -#endif /* _bcmsdpcm_h_ */ |