diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/include/bcmdefs.h')
| -rwxr-xr-x | ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/include/bcmdefs.h | 270 |
1 files changed, 0 insertions, 270 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/include/bcmdefs.h b/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/include/bcmdefs.h deleted file mode 100755 index 00906e35..00000000 --- a/ANDROID_3.4.5/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6330/include/bcmdefs.h +++ /dev/null @@ -1,270 +0,0 @@ -/* - * Misc system wide definitions - * - * Copyright (C) 1999-2012, Broadcom Corporation - * - * Unless you and Broadcom execute a separate written software license - * agreement governing use of this software, this software is licensed to you - * under the terms of the GNU General Public License version 2 (the "GPL"), - * available at http://www.broadcom.com/licenses/GPLv2.php, with the - * following added to such license: - * - * As a special exception, the copyright holders of this software give you - * permission to link this software with independent modules, and to copy and - * distribute the resulting executable under terms of your choice, provided that - * you also meet, for each linked independent module, the terms and conditions of - * the license of that module. An independent module is a module which is not - * derived from this software. The special exception does not apply to any - * modifications of the software. - * - * Notwithstanding the above, under no circumstances may you combine this - * software in any way with any other Broadcom software provided under a license - * other than the GPL, without Broadcom's express prior written consent. - * - * $Id: bcmdefs.h 316830 2012-02-23 20:29:22Z $ - */ - -#ifndef _bcmdefs_h_ -#define _bcmdefs_h_ - -/* - * One doesn't need to include this file explicitly, gets included automatically if - * typedefs.h is included. - */ - -/* Use BCM_REFERENCE to suppress warnings about intentionally-unused function - * arguments or local variables. - */ -#define BCM_REFERENCE(data) ((void)(data)) - -/* Compile-time assert can be used in place of ASSERT if the expression evaluates - * to a constant at compile time. - */ -#define STATIC_ASSERT(expr) { \ - /* Make sure the expression is constant. */ \ - typedef enum { _STATIC_ASSERT_NOT_CONSTANT = (expr) } _static_assert_e; \ - /* Make sure the expression is true. */ \ - typedef char STATIC_ASSERT_FAIL[(expr) ? 1 : -1]; \ -} - -/* Reclaiming text and data : - * The following macros specify special linker sections that can be reclaimed - * after a system is considered 'up'. - * BCMATTACHFN is also used for detach functions (it's not worth having a BCMDETACHFN, - * as in most cases, the attach function calls the detach function to clean up on error). - */ - -#define bcmreclaimed 0 -#define _data _data -#define _fn _fn -#define BCMPREATTACHDATA(_data) _data -#define BCMPREATTACHFN(_fn) _fn -#define _data _data -#define _fn _fn -#define _fn _fn -#define BCMNMIATTACHFN(_fn) _fn -#define BCMNMIATTACHDATA(_data) _data -#define CONST const -#ifndef BCMFASTPATH -#define BCMFASTPATH -#define BCMFASTPATH_HOST -#endif /* BCMFASTPATH */ - - -/* Put some library data/code into ROM to reduce RAM requirements */ -#define _data _data -#define BCMROMDAT_NAME(_data) _data -#define _fn _fn -#define _fn _fn -#define STATIC static -#define BCMROMDAT_ARYSIZ(data) ARRAYSIZE(data) -#define BCMROMDAT_SIZEOF(data) sizeof(data) -#define BCMROMDAT_APATCH(data) -#define BCMROMDAT_SPATCH(data) - -/* Bus types */ -#define SI_BUS 0 /* SOC Interconnect */ -#define PCI_BUS 1 /* PCI target */ -#define PCMCIA_BUS 2 /* PCMCIA target */ -#define SDIO_BUS 3 /* SDIO target */ -#define JTAG_BUS 4 /* JTAG */ -#define USB_BUS 5 /* USB (does not support R/W REG) */ -#define SPI_BUS 6 /* gSPI target */ -#define RPC_BUS 7 /* RPC target */ - -/* Allows size optimization for single-bus image */ -#ifdef BCMBUSTYPE -#define BUSTYPE(bus) (BCMBUSTYPE) -#else -#define BUSTYPE(bus) (bus) -#endif - -/* Allows size optimization for single-backplane image */ -#ifdef BCMCHIPTYPE -#define CHIPTYPE(bus) (BCMCHIPTYPE) -#else -#define CHIPTYPE(bus) (bus) -#endif - - -/* Allows size optimization for SPROM support */ -#if defined(BCMSPROMBUS) -#define SPROMBUS (BCMSPROMBUS) -#elif defined(SI_PCMCIA_SROM) -#define SPROMBUS (PCMCIA_BUS) -#else -#define SPROMBUS (PCI_BUS) -#endif - -/* Allows size optimization for single-chip image */ -#ifdef BCMCHIPID -#define CHIPID(chip) (BCMCHIPID) -#else -#define CHIPID(chip) (chip) -#endif - -#ifdef BCMCHIPREV -#define CHIPREV(rev) (BCMCHIPREV) -#else -#define CHIPREV(rev) (rev) -#endif - -/* Defines for DMA Address Width - Shared between OSL and HNDDMA */ -#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */ -#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */ -#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */ - -#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */ -#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */ -#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */ -#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */ - -#ifdef BCMDMA64OSL -typedef struct { - uint32 loaddr; - uint32 hiaddr; -} dma64addr_t; - -typedef dma64addr_t dmaaddr_t; -#define PHYSADDRHI(_pa) ((_pa).hiaddr) -#define PHYSADDRHISET(_pa, _val) \ - do { \ - (_pa).hiaddr = (_val); \ - } while (0) -#define PHYSADDRLO(_pa) ((_pa).loaddr) -#define PHYSADDRLOSET(_pa, _val) \ - do { \ - (_pa).loaddr = (_val); \ - } while (0) - -#else -typedef unsigned long dmaaddr_t; -#define PHYSADDRHI(_pa) (0) -#define PHYSADDRHISET(_pa, _val) -#define PHYSADDRLO(_pa) ((_pa)) -#define PHYSADDRLOSET(_pa, _val) \ - do { \ - (_pa) = (_val); \ - } while (0) -#endif /* BCMDMA64OSL */ - -/* One physical DMA segment */ -typedef struct { - dmaaddr_t addr; - uint32 length; -} hnddma_seg_t; - -#define MAX_DMA_SEGS 4 - - -typedef struct { - void *oshdmah; /* Opaque handle for OSL to store its information */ - uint origsize; /* Size of the virtual packet */ - uint nsegs; - hnddma_seg_t segs[MAX_DMA_SEGS]; -} hnddma_seg_map_t; - - -/* packet headroom necessary to accommodate the largest header in the system, (i.e TXOFF). - * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL. - * There is a compile time check in wlc.c which ensure that this value is at least as big - * as TXOFF. This value is used in dma_rxfill (hnddma.c). - */ - -#if defined(BCM_RPC_NOCOPY) || defined(BCM_RCP_TXNOCOPY) -/* add 40 bytes to allow for extra RPC header and info */ -#define BCMEXTRAHDROOM 220 -#else /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */ -#define BCMEXTRAHDROOM 172 -#endif /* BCM_RPC_NOCOPY || BCM_RPC_TXNOCOPY */ - -/* Packet alignment for most efficient SDIO (can change based on platform) */ -#ifndef SDALIGN -#define SDALIGN 32 -#endif - -/* Headroom required for dongle-to-host communication. Packets allocated - * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should - * leave this much room in front for low-level message headers which may - * be needed to get across the dongle bus to the host. (These messages - * don't go over the network, so room for the full WL header above would - * be a waste.). -*/ -#define BCMDONGLEHDRSZ 12 -#define BCMDONGLEPADSZ 16 - -#define BCMDONGLEOVERHEAD (BCMDONGLEHDRSZ + BCMDONGLEPADSZ) - - -#if defined(NO_BCMDBG_ASSERT) -# undef BCMDBG_ASSERT -# undef BCMASSERT_LOG -#endif - -#if defined(BCMASSERT_LOG) -#define BCMASSERT_SUPPORT -#endif - -/* Macros for doing definition and get/set of bitfields - * Usage example, e.g. a three-bit field (bits 4-6): - * #define <NAME>_M BITFIELD_MASK(3) - * #define <NAME>_S 4 - * ... - * regval = R_REG(osh, ®s->regfoo); - * field = GFIELD(regval, <NAME>); - * regval = SFIELD(regval, <NAME>, 1); - * W_REG(osh, ®s->regfoo, regval); - */ -#define BITFIELD_MASK(width) \ - (((unsigned)1 << (width)) - 1) -#define GFIELD(val, field) \ - (((val) >> field ## _S) & field ## _M) -#define SFIELD(val, field, bits) \ - (((val) & (~(field ## _M << field ## _S))) | \ - ((unsigned)(bits) << field ## _S)) - -/* define BCMSMALL to remove misc features for memory-constrained environments */ -#ifdef BCMSMALL -#undef BCMSPACE -#define bcmspace FALSE /* if (bcmspace) code is discarded */ -#else -#define BCMSPACE -#define bcmspace TRUE /* if (bcmspace) code is retained */ -#endif - -/* Max. nvram variable table size */ -#define MAXSZ_NVRAM_VARS 4096 - - -/* Max size for reclaimable NVRAM array */ -#ifdef DL_NVRAM -#define NVRAM_ARRAY_MAXSIZE DL_NVRAM -#else -#define NVRAM_ARRAY_MAXSIZE MAXSZ_NVRAM_VARS -#endif /* DL_NVRAM */ - -#ifdef BCMUSBDEV_ENABLED -extern uint32 gFWID; -#endif - -#endif /* _bcmdefs_h_ */ |