diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/net/wan/wanxl.h')
| -rw-r--r-- | ANDROID_3.4.5/drivers/net/wan/wanxl.h | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/ANDROID_3.4.5/drivers/net/wan/wanxl.h b/ANDROID_3.4.5/drivers/net/wan/wanxl.h deleted file mode 100644 index 3f86558f..00000000 --- a/ANDROID_3.4.5/drivers/net/wan/wanxl.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * wanXL serial card driver for Linux - * definitions common to host driver and card firmware - * - * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - */ - -#define RESET_WHILE_LOADING 0 - -/* you must rebuild the firmware if any of the following is changed */ -#define DETECT_RAM 0 /* needed for > 4MB RAM, 16 MB maximum */ -#define QUICC_MEMCPY_USES_PLX 1 /* must be used if the host has > 256 MB RAM */ - - -#define STATUS_CABLE_V35 2 -#define STATUS_CABLE_X21 3 -#define STATUS_CABLE_V24 4 -#define STATUS_CABLE_EIA530 5 -#define STATUS_CABLE_INVALID 6 -#define STATUS_CABLE_NONE 7 - -#define STATUS_CABLE_DCE 0x8000 -#define STATUS_CABLE_DSR 0x0010 -#define STATUS_CABLE_DCD 0x0008 -#define STATUS_CABLE_PM_SHIFT 5 - -#define PDM_OFFSET 0x1000 - -#define TX_BUFFERS 10 /* per port */ -#define RX_BUFFERS 30 -#define RX_QUEUE_LENGTH 40 /* card->host queue length - per card */ - -#define PACKET_EMPTY 0x00 -#define PACKET_FULL 0x10 -#define PACKET_SENT 0x20 /* TX only */ -#define PACKET_UNDERRUN 0x30 /* TX only */ -#define PACKET_PORT_MASK 0x03 /* RX only */ - -/* bit numbers in PLX9060 doorbell registers */ -#define DOORBELL_FROM_CARD_TX_0 0 /* packet sent by the card */ -#define DOORBELL_FROM_CARD_TX_1 1 -#define DOORBELL_FROM_CARD_TX_2 2 -#define DOORBELL_FROM_CARD_TX_3 3 -#define DOORBELL_FROM_CARD_RX 4 -#define DOORBELL_FROM_CARD_CABLE_0 5 /* cable/PM/etc. changed */ -#define DOORBELL_FROM_CARD_CABLE_1 6 -#define DOORBELL_FROM_CARD_CABLE_2 7 -#define DOORBELL_FROM_CARD_CABLE_3 8 - -#define DOORBELL_TO_CARD_OPEN_0 0 -#define DOORBELL_TO_CARD_OPEN_1 1 -#define DOORBELL_TO_CARD_OPEN_2 2 -#define DOORBELL_TO_CARD_OPEN_3 3 -#define DOORBELL_TO_CARD_CLOSE_0 4 -#define DOORBELL_TO_CARD_CLOSE_1 5 -#define DOORBELL_TO_CARD_CLOSE_2 6 -#define DOORBELL_TO_CARD_CLOSE_3 7 -#define DOORBELL_TO_CARD_TX_0 8 /* outbound packet queued */ -#define DOORBELL_TO_CARD_TX_1 9 -#define DOORBELL_TO_CARD_TX_2 10 -#define DOORBELL_TO_CARD_TX_3 11 - -/* firmware-only status bits, starting from last DOORBELL_TO_CARD + 1 */ -#define TASK_SCC_0 12 -#define TASK_SCC_1 13 -#define TASK_SCC_2 14 -#define TASK_SCC_3 15 - -#define ALIGN32(x) (((x) + 3) & 0xFFFFFFFC) -#define BUFFER_LENGTH ALIGN32(HDLC_MAX_MRU + 4) /* 4 bytes for 32-bit CRC */ - -/* Address of TX and RX buffers in 68360 address space */ -#define BUFFERS_ADDR 0x4000 /* 16 KB */ - -#ifndef __ASSEMBLER__ -#define PLX_OFFSET 0 -#else -#define PLX_OFFSET PLX + 0x80 -#endif - -#define PLX_MAILBOX_0 (PLX_OFFSET + 0x40) -#define PLX_MAILBOX_1 (PLX_OFFSET + 0x44) -#define PLX_MAILBOX_2 (PLX_OFFSET + 0x48) -#define PLX_MAILBOX_3 (PLX_OFFSET + 0x4C) -#define PLX_MAILBOX_4 (PLX_OFFSET + 0x50) -#define PLX_MAILBOX_5 (PLX_OFFSET + 0x54) -#define PLX_MAILBOX_6 (PLX_OFFSET + 0x58) -#define PLX_MAILBOX_7 (PLX_OFFSET + 0x5C) -#define PLX_DOORBELL_TO_CARD (PLX_OFFSET + 0x60) -#define PLX_DOORBELL_FROM_CARD (PLX_OFFSET + 0x64) -#define PLX_INTERRUPT_CS (PLX_OFFSET + 0x68) -#define PLX_CONTROL (PLX_OFFSET + 0x6C) - -#ifdef __ASSEMBLER__ -#define PLX_DMA_0_MODE (PLX + 0x100) -#define PLX_DMA_0_PCI (PLX + 0x104) -#define PLX_DMA_0_LOCAL (PLX + 0x108) -#define PLX_DMA_0_LENGTH (PLX + 0x10C) -#define PLX_DMA_0_DESC (PLX + 0x110) -#define PLX_DMA_1_MODE (PLX + 0x114) -#define PLX_DMA_1_PCI (PLX + 0x118) -#define PLX_DMA_1_LOCAL (PLX + 0x11C) -#define PLX_DMA_1_LENGTH (PLX + 0x120) -#define PLX_DMA_1_DESC (PLX + 0x124) -#define PLX_DMA_CMD_STS (PLX + 0x128) -#define PLX_DMA_ARBITR_0 (PLX + 0x12C) -#define PLX_DMA_ARBITR_1 (PLX + 0x130) -#endif - -#define DESC_LENGTH 12 - -/* offsets from start of status_t */ -/* card to host */ -#define STATUS_OPEN 0 -#define STATUS_CABLE (STATUS_OPEN + 4) -#define STATUS_RX_OVERRUNS (STATUS_CABLE + 4) -#define STATUS_RX_FRAME_ERRORS (STATUS_RX_OVERRUNS + 4) - -/* host to card */ -#define STATUS_PARITY (STATUS_RX_FRAME_ERRORS + 4) -#define STATUS_ENCODING (STATUS_PARITY + 4) -#define STATUS_CLOCKING (STATUS_ENCODING + 4) -#define STATUS_TX_DESCS (STATUS_CLOCKING + 4) - -#ifndef __ASSEMBLER__ - -typedef struct { - volatile u32 stat; - u32 address; /* PCI address */ - volatile u32 length; -}desc_t; - - -typedef struct { -// Card to host - volatile u32 open; - volatile u32 cable; - volatile u32 rx_overruns; - volatile u32 rx_frame_errors; - -// Host to card - u32 parity; - u32 encoding; - u32 clocking; - desc_t tx_descs[TX_BUFFERS]; -}port_status_t; - -#endif /* __ASSEMBLER__ */ |