diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x')
10 files changed, 0 insertions, 4921 deletions
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/Kconfig b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/Kconfig deleted file mode 100755 index 7dadb37f..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -config TOUCHSCREEN_FT5X0X
- tristate "FT5X0X Capacity Touchscreen Device Support"
- default y
- depends on ARCH_WMT
- ---help---
- Say Y here if you have an WMT based board with touchscreen
- attached to it.
- If unsure, say N.
- To compile this driver as a module, choose M here: the
- module will be called ft5x0x.
-
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/Makefile b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/Makefile deleted file mode 100755 index 0283c3ec..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -KERNELDIR=../../../../
-CROSS = arm_1103_le-
-CC= $(CROSS)gcc
-LD= $(CROSS)ld
-STRIP = $(CROSS)strip
-
-DEBUG = n
-
-# Add your debugging flag (or not) to EXTRA_CFLAGS
-ifeq ($(DEBUG),y)
-# DEBFLAGS = -O -g -DSCULL_DEBUG # "-O" is needed to expand inlines
-DEBFLAGS = -O0 -g -DSCULL_DEBUG # "-O" is needed to expand inlines
-
-else
- DEBFLAGS = -O2 -Wall
-endif
-
-EXTRA_CFLAGS += $(DEBFLAGS)
-
-
-MY_MODULE_NAME=s_wmt_ts_ft5x0x
-
-#obj-$(CONFIG_TOUCHSCREEN_FT5X0X) := $(MY_MODULE_NAME).o
-obj-m := $(MY_MODULE_NAME).o
-$(MY_MODULE_NAME)-objs := ft5x0x.o ft5x0x_upg.o ft5402_config.o ini.o
-
-default:
- $(MAKE) -C $(KERNELDIR) SUBDIRS=$(PWD) modules
- $(STRIP) --strip-debug $(MY_MODULE_NAME).ko
- @rm -rf *.o *~ core .depend .*.cmd *.mod.c .tmp_versions *.order *.symvers
-
-clean:
- @rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions *.order *.symvers
-
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_config.c b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_config.c deleted file mode 100755 index 58683ebd..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_config.c +++ /dev/null @@ -1,2295 +0,0 @@ -#include "ft5402_config.h"
-//#include <linux/i2c/ft5402_ts.h>
-
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/semaphore.h>
-#include <linux/mutex.h>
-#include <linux/interrupt.h>
-#include <mach/irqs.h>
-
-#include <linux/syscalls.h>
-#include <asm/unistd.h>
-#include <asm/uaccess.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-
-#include "ini.h"
-#include "ft5402_ini_config.h"
-#include "ft5x0x.h"
-
-
-extern int ft5x0x_i2c_txdata(char *txdata, int length);
-
-int ft5402_write_reg(struct i2c_client * client, u8 regaddr, u8 regvalue)
-{
- unsigned char buf[2] = {0};
- buf[0] = regaddr;
- buf[1] = regvalue;
-
- return ft5x0x_i2c_txdata(buf, 2);
-}
-
-int ft5402_read_reg(struct i2c_client * client, u8 regaddr, u8 * regvalue)
-{
- int ret;
-
- struct i2c_msg msgs[] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = ®addr,
- },
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = regvalue,
- },
- };
- ret = i2c_transfer(client->adapter, msgs, 2);
- if (ret < 0)
- pr_err("function:%s. i2c read error: %d\n", __func__, ret);
- return ret;
-}
-
-/*set tx order
-*@txNO: offset from tx order start
-*@txNO1: tx NO.
-*/
-static int ft5402_set_tx_order(struct i2c_client * client, u8 txNO, u8 txNO1)
-{
- unsigned char ReCode = 0;
- if (txNO < FT5402_TX_TEST_MODE_1)
- ReCode = ft5402_write_reg(client, FT5402_REG_TX_ORDER_START + txNO,
- txNO1);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_TX_ORDER_START + txNO - FT5402_TX_TEST_MODE_1,
- txNO1);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
- return ReCode;
-}
-
-/*set tx order
-*@txNO: offset from tx order start
-*@pTxNo: return value of tx NO.
-*/
-static int ft5402_get_tx_order(struct i2c_client * client, u8 txNO, u8 *pTxNo)
-{
- unsigned char ReCode = 0;
- if (txNO < FT5402_TX_TEST_MODE_1)
- ReCode = ft5402_read_reg(client, FT5402_REG_TX_ORDER_START + txNO,
- pTxNo);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if(ReCode >= 0)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_TX_ORDER_START + txNO - FT5402_TX_TEST_MODE_1,
- pTxNo);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
- return ReCode;
-}
-
-/*set tx cap
-*@txNO: tx NO.
-*@cap_value: value of cap
-*/
-static int ft5402_set_tx_cap(struct i2c_client * client, u8 txNO, u8 cap_value)
-{
- unsigned char ReCode = 0;
- if (txNO < FT5402_TX_TEST_MODE_1)
- ReCode = ft5402_write_reg(client, FT5402_REG_TX_CAP_START + txNO,
- cap_value);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_TX_CAP_START + txNO - FT5402_TX_TEST_MODE_1,
- cap_value);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
- return ReCode;
-}
-
-/*get tx cap*/
-static int ft5402_get_tx_cap(struct i2c_client * client, u8 txNO, u8 *pCap)
-{
- unsigned char ReCode = 0;
- if (txNO < FT5402_TX_TEST_MODE_1)
- ReCode = ft5402_read_reg(client, FT5402_REG_TX_CAP_START + txNO,
- pCap);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_TX_CAP_START + txNO - FT5402_TX_TEST_MODE_1,
- pCap);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
- return ReCode;
-}
-
-/*set tx offset*/
-static int ft5402_set_tx_offset(struct i2c_client * client, u8 txNO, u8 offset_value)
-{
- unsigned char temp=0;
- unsigned char ReCode = 0;
- if (txNO < FT5402_TX_TEST_MODE_1) {
- ReCode = ft5402_read_reg(client,
- FT5402_REG_TX_OFFSET_START + (txNO>>1), &temp);
- if (ReCode >= 0) {
- if (txNO%2 == 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_TX_OFFSET_START + (txNO>>1),
- (temp&0xf0) + (offset_value&0x0f));
- else
- ReCode = ft5402_write_reg(client,
- FT5402_REG_TX_OFFSET_START + (txNO>>1),
- (temp&0x0f) + (offset_value<<4));
- }
- } else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0) {
- ReCode = ft5402_read_reg(client,
- FT5402_REG_DEVICE_MODE+((txNO-FT5402_TX_TEST_MODE_1)>>1),
- &temp); /*enter Test mode 2*/
- if (ReCode >= 0) {
- if(txNO%2 == 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_TX_OFFSET_START+((txNO-FT5402_TX_TEST_MODE_1)>>1),
- (temp&0xf0)+(offset_value&0x0f));
- else
- ReCode = ft5402_write_reg(client,
- FT5402_REG_TX_OFFSET_START+((txNO-FT5402_TX_TEST_MODE_1)>>1),
- (temp&0xf0)+(offset_value<<4));
- }
- }
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
-
- return ReCode;
-}
-
-/*get tx offset*/
-static int ft5402_get_tx_offset(struct i2c_client * client, u8 txNO, u8 *pOffset)
-{
- unsigned char temp=0;
- unsigned char ReCode = 0;
- if (txNO < FT5402_TX_TEST_MODE_1)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_TX_OFFSET_START + (txNO>>1), &temp);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_TX_OFFSET_START+((txNO-FT5402_TX_TEST_MODE_1)>>1),
- &temp);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
-
- if (ReCode >= 0)
- (txNO%2 == 0) ? (*pOffset = (temp&0x0f)) : (*pOffset = (temp>>4));
- return ReCode;
-}
-
-/*set rx order*/
-static int ft5402_set_rx_order(struct i2c_client * client, u8 rxNO, u8 rxNO1)
-{
- unsigned char ReCode = 0;
- ReCode = ft5402_write_reg(client, FT5402_REG_RX_ORDER_START + rxNO,
- rxNO1);
- return ReCode;
-}
-
-/*get rx order*/
-static int ft5402_get_rx_order(struct i2c_client * client, u8 rxNO, u8 *prxNO1)
-{
- unsigned char ReCode = 0;
- ReCode = ft5402_read_reg(client, FT5402_REG_RX_ORDER_START + rxNO,
- prxNO1);
- return ReCode;
-}
-
-/*set rx cap*/
-static int ft5402_set_rx_cap(struct i2c_client * client, u8 rxNO, u8 cap_value)
-{
- unsigned char ReCode = 0;
- if (rxNO < FT5402_RX_TEST_MODE_1)
- ReCode = ft5402_write_reg(client, FT5402_REG_RX_CAP_START + rxNO,
- cap_value);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if(ReCode >= 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_RX_CAP_START + rxNO - FT5402_RX_TEST_MODE_1,
- cap_value);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
-
- return ReCode;
-}
-
-/*get rx cap*/
-static int ft5402_get_rx_cap(struct i2c_client * client, u8 rxNO, u8 *pCap)
-{
- unsigned char ReCode = 0;
- if (rxNO < FT5402_RX_TEST_MODE_1)
- ReCode = ft5402_read_reg(client, FT5402_REG_RX_CAP_START + rxNO,
- pCap);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if(ReCode >= 0)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_RX_CAP_START + rxNO - FT5402_RX_TEST_MODE_1,
- pCap);
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
-
- return ReCode;
-}
-
-/*set rx offset*/
-static int ft5402_set_rx_offset(struct i2c_client * client, u8 rxNO, u8 offset_value)
-{
- unsigned char temp=0;
- unsigned char ReCode = 0;
- if (rxNO < FT5402_RX_TEST_MODE_1) {
- ReCode = ft5402_read_reg(client,
- FT5402_REG_RX_OFFSET_START + (rxNO>>1), &temp);
- if (ReCode >= 0) {
- if (rxNO%2 == 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_RX_OFFSET_START + (rxNO>>1),
- (temp&0xf0) + (offset_value&0x0f));
- else
- ReCode = ft5402_write_reg(client,
- FT5402_REG_RX_OFFSET_START + (rxNO>>1),
- (temp&0x0f) + (offset_value<<4));
- }
- }
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0) {
- ReCode = ft5402_read_reg(client,
- FT5402_REG_DEVICE_MODE+((rxNO-FT5402_RX_TEST_MODE_1)>>1),
- &temp); /*enter Test mode 2*/
- if (ReCode >= 0) {
- if (rxNO%2 == 0)
- ReCode = ft5402_write_reg(client,
- FT5402_REG_RX_OFFSET_START+((rxNO-FT5402_RX_TEST_MODE_1)>>1),
- (temp&0xf0)+(offset_value&0x0f));
- else
- ReCode = ft5402_write_reg(client,
- FT5402_REG_RX_OFFSET_START+((rxNO-FT5402_RX_TEST_MODE_1)>>1),
- (temp&0xf0)+(offset_value<<4));
- }
- }
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
-
- return ReCode;
-}
-
-/*get rx offset*/
-static int ft5402_get_rx_offset(struct i2c_client * client, u8 rxNO, u8 *pOffset)
-{
- unsigned char temp = 0;
- unsigned char ReCode = 0;
- if (rxNO < FT5402_RX_TEST_MODE_1)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_RX_OFFSET_START + (rxNO>>1), &temp);
- else {
- ReCode = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE_2<<4); /*enter Test mode 2*/
- if (ReCode >= 0)
- ReCode = ft5402_read_reg(client,
- FT5402_REG_RX_OFFSET_START+((rxNO-FT5402_RX_TEST_MODE_1)>>1),
- &temp);
-
- ft5402_write_reg(client, FT5402_REG_DEVICE_MODE,
- FT5402_REG_TEST_MODE<<4); /*enter Test mode*/
- }
-
- if (ReCode >= 0) {
- if (0 == (rxNO%2))
- *pOffset = (temp&0x0f);
- else
- *pOffset = (temp>>4);
- }
-
- return ReCode;
-}
-
-/*set tx num*/
-static int ft5402_set_tx_num(struct i2c_client *client, u8 txnum)
-{
- return ft5402_write_reg(client, FT5402_REG_TX_NUM, txnum);
-}
-
-/*get tx num*/
-static int ft5402_get_tx_num(struct i2c_client *client, u8 *ptxnum)
-{
- return ft5402_read_reg(client, FT5402_REG_TX_NUM, ptxnum);
-}
-
-/*set rx num*/
-static int ft5402_set_rx_num(struct i2c_client *client, u8 rxnum)
-{
- return ft5402_write_reg(client, FT5402_REG_RX_NUM, rxnum);
-}
-
-/*get rx num*/
-static int ft5402_get_rx_num(struct i2c_client *client, u8 *prxnum)
-{
- return ft5402_read_reg(client, FT5402_REG_RX_NUM, prxnum);
-}
-
-/*set resolution*/
-static int ft5402_set_Resolution(struct i2c_client *client, u16 x, u16 y)
-{
- unsigned char cRet = 0;
- cRet &= ft5402_write_reg(client,
- FT5402_REG_RESOLUTION_X_H, ((unsigned char)(x>>8)));
- cRet &= ft5402_write_reg(client,
- FT5402_REG_RESOLUTION_X_L, ((unsigned char)(x&0x00ff)));
-
- cRet &= ft5402_write_reg(client,
- FT5402_REG_RESOLUTION_Y_H, ((unsigned char)(y>>8)));
- cRet &= ft5402_write_reg(client,
- FT5402_REG_RESOLUTION_Y_L, ((unsigned char)(y&0x00ff)));
-
- return cRet;
-}
-
-/*get resolution*/
-static int ft5402_get_Resolution(struct i2c_client *client,
- u16 *px, u16 *py)
-{
- unsigned char cRet = 0, temp1 = 0, temp2 = 0;
- cRet &= ft5402_read_reg(client,
- FT5402_REG_RESOLUTION_X_H, &temp1);
- cRet &= ft5402_read_reg(client,
- FT5402_REG_RESOLUTION_X_L, &temp2);
- (*px) = (((u16)temp1) << 8) | ((u16)temp2);
-
- cRet &= ft5402_read_reg(client,
- FT5402_REG_RESOLUTION_Y_H, &temp1);
- cRet &= ft5402_read_reg(client,
- FT5402_REG_RESOLUTION_Y_L, &temp2);
- (*py) = (((u16)temp1) << 8) | ((u16)temp2);
-
- return cRet;
-}
-
-
-/*set voltage*/
-static int ft5402_set_vol(struct i2c_client *client, u8 Vol)
-{
- return ft5402_write_reg(client, FT5402_REG_VOLTAGE, Vol);
-}
-
-/*get voltage*/
-static int ft5402_get_vol(struct i2c_client *client, u8 *pVol)
-{
- return ft5402_read_reg(client, FT5402_REG_VOLTAGE, pVol);
-}
-
-/*set gain*/
-static int ft5402_set_gain(struct i2c_client *client, u8 Gain)
-{
- return ft5402_write_reg(client, FT5402_REG_GAIN, Gain);
-}
-
-/*get gain*/
-static int ft5402_get_gain(struct i2c_client *client, u8 *pGain)
-{
- return ft5402_read_reg(client, FT5402_REG_GAIN, pGain);
-}
-
-/*get start rx*/
-static int ft5402_get_start_rx(struct i2c_client *client, u8 *pRx)
-{
- return ft5402_read_reg(client, FT5402_REG_START_RX, pRx);
-}
-
-
-/*get adc target*/
-static int ft5402_get_adc_target(struct i2c_client *client, u16 *pvalue)
-{
- int err = 0;
- u8 tmp1, tmp2;
- err = ft5402_read_reg(client, FT5402_REG_ADC_TARGET_HIGH,
- &tmp1);
- if (err < 0)
- dev_err(&client->dev, "%s:get adc target high failed\n",
- __func__);
- err = ft5402_read_reg(client, FT5402_REG_ADC_TARGET_LOW,
- &tmp2);
- if (err < 0)
- dev_err(&client->dev, "%s:get adc target low failed\n",
- __func__);
-
- *pvalue = ((u16)tmp1<<8) + (u16)tmp2;
- return err;
-}
-
-static int ft5402_set_face_detect_statistics_tx_num(struct i2c_client *client, u8 prevalue)
-{
- return ft5402_write_reg(client, FT5402_REG_FACE_DETECT_STATISTICS_TX_NUM,
- prevalue);
-}
-
-static int ft5402_get_face_detect_statistics_tx_num(struct i2c_client *client, u8 *pprevalue)
-{
- return ft5402_read_reg(client, FT5402_REG_FACE_DETECT_STATISTICS_TX_NUM,
- pprevalue);
-}
-
-static int ft5402_set_face_detect_pre_value(struct i2c_client *client, u8 prevalue)
-{
- return ft5402_write_reg(client, FT5402_REG_FACE_DETECT_PRE_VALUE,
- prevalue);
-}
-
-static int ft5402_get_face_detect_pre_value(struct i2c_client *client, u8 *pprevalue)
-{
- return ft5402_read_reg(client, FT5402_REG_FACE_DETECT_PRE_VALUE,
- pprevalue);
-}
-
-static int ft5402_set_face_detect_num(struct i2c_client *client, u8 num)
-{
- return ft5402_write_reg(client, FT5402_REG_FACE_DETECT_NUM,
- num);
-}
-
-static int ft5402_get_face_detect_num(struct i2c_client *client, u8 *pnum)
-{
- return ft5402_read_reg(client, FT5402_REG_FACE_DETECT_NUM,
- pnum);
-}
-
-
-static int ft5402_set_peak_value_min(struct i2c_client *client, u8 min)
-{
- return ft5402_write_reg(client, FT5402_REG_BIGAREA_PEAK_VALUE_MIN,
- min);
-}
-
-static int ft5402_get_peak_value_min(struct i2c_client *client, u8 *pmin)
-{
- return ft5402_read_reg(client, FT5402_REG_BIGAREA_PEAK_VALUE_MIN,
- pmin);
-}
-
-static int ft5402_set_diff_value_over_num(struct i2c_client *client, u8 num)
-{
- return ft5402_write_reg(client, FT5402_REG_BIGAREA_DIFF_VALUE_OVER_NUM,
- num);
-}
-static int ft5402_get_diff_value_over_num(struct i2c_client *client, u8 *pnum)
-{
- return ft5402_read_reg(client, FT5402_REG_BIGAREA_DIFF_VALUE_OVER_NUM,
- pnum);
-}
-
-
-static int ft5402_set_customer_id(struct i2c_client *client, u8 num)
-{
- return ft5402_write_reg(client, FT5402_REG_CUSTOMER_ID,
- num);
-}
-static int ft5402_get_customer_id(struct i2c_client *client, u8 *pnum)
-{
- return ft5402_read_reg(client, FT5402_REG_CUSTOMER_ID,
- pnum);
-}
-
-static int ft5402_set_kx(struct i2c_client *client, u16 value)
-{
- int err = 0;
- err = ft5402_write_reg(client, FT5402_REG_KX_H,
- value >> 8);
- if (err < 0)
- dev_err(&client->dev, "%s:set kx high failed\n",
- __func__);
- err = ft5402_write_reg(client, FT5402_REG_KX_L,
- value);
- if (err < 0)
- dev_err(&client->dev, "%s:set kx low failed\n",
- __func__);
-
- return err;
-}
-
-static int ft5402_get_kx(struct i2c_client *client, u16 *pvalue)
-{
- int err = 0;
- u8 tmp1, tmp2;
- err = ft5402_read_reg(client, FT5402_REG_KX_H,
- &tmp1);
- if (err < 0)
- dev_err(&client->dev, "%s:get kx high failed\n",
- __func__);
- err = ft5402_read_reg(client, FT5402_REG_KX_L,
- &tmp2);
- if (err < 0)
- dev_err(&client->dev, "%s:get kx low failed\n",
- __func__);
-
- *pvalue = ((u16)tmp1<<8) + (u16)tmp2;
- return err;
-}
-static int ft5402_set_ky(struct i2c_client *client, u16 value)
-{
- int err = 0;
- err = ft5402_write_reg(client, FT5402_REG_KY_H,
- value >> 8);
- if (err < 0)
- dev_err(&client->dev, "%s:set ky high failed\n",
- __func__);
- err = ft5402_write_reg(client, FT5402_REG_KY_L,
- value);
- if (err < 0)
- dev_err(&client->dev, "%s:set ky low failed\n",
- __func__);
-
- return err;
-}
-
-static int ft5402_get_ky(struct i2c_client *client, u16 *pvalue)
-{
- int err = 0;
- u8 tmp1, tmp2;
- err = ft5402_read_reg(client, FT5402_REG_KY_H,
- &tmp1);
- if (err < 0)
- dev_err(&client->dev, "%s:get ky high failed\n",
- __func__);
- err = ft5402_read_reg(client, FT5402_REG_KY_L,
- &tmp2);
- if (err < 0)
- dev_err(&client->dev, "%s:get ky low failed\n",
- __func__);
-
- *pvalue = ((u16)tmp1<<8) + (u16)tmp2;
- return err;
-}
-static int ft5402_set_lemda_x(struct i2c_client *client, u8 value)
-{
- return ft5402_write_reg(client, FT5402_REG_LEMDA_X,
- value);
-}
-
-static int ft5402_get_lemda_x(struct i2c_client *client, u8 *pvalue)
-{
- return ft5402_read_reg(client, FT5402_REG_LEMDA_X,
- pvalue);
-}
-static int ft5402_set_lemda_y(struct i2c_client *client, u8 value)
-{
- return ft5402_write_reg(client, FT5402_REG_LEMDA_Y,
- value);
-}
-
-static int ft5402_get_lemda_y(struct i2c_client *client, u8 *pvalue)
-{
- return ft5402_read_reg(client, FT5402_REG_LEMDA_Y,
- pvalue);
-}
-static int ft5402_set_pos_x(struct i2c_client *client, u8 value)
-{
- return ft5402_write_reg(client, FT5402_REG_DIRECTION,
- value);
-}
-
-static int ft5402_get_pos_x(struct i2c_client *client, u8 *pvalue)
-{
- return ft5402_read_reg(client, FT5402_REG_DIRECTION,
- pvalue);
-}
-
-static int ft5402_set_scan_select(struct i2c_client *client, u8 value)
-{
- return ft5402_write_reg(client, FT5402_REG_SCAN_SELECT,
- value);
-}
-
-static int ft5402_get_scan_select(struct i2c_client *client, u8 *pvalue)
-{
- return ft5402_read_reg(client, FT5402_REG_SCAN_SELECT,
- pvalue);
-}
-
-static int ft5402_set_other_param(struct i2c_client *client)
-{
- int err = 0;
- err = ft5402_write_reg(client, FT5402_REG_THGROUP, (u8)(g_param_ft5402.ft5402_THGROUP));
- if (err < 0) {
- dev_err(&client->dev, "%s:write THGROUP failed.\n", __func__);
- return err;
- }
- err = ft5402_write_reg(client, FT5402_REG_THPEAK, g_param_ft5402.ft5402_THPEAK);
- if (err < 0) {
- dev_err(&client->dev, "%s:write THPEAK failed.\n",
- __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_PWMODE_CTRL,
- g_param_ft5402.ft5402_PWMODE_CTRL);
- if (err < 0) {
- dev_err(&client->dev, "%s:write PERIOD_CTRL failed.\n", __func__);
- return err;
- }
- err = ft5402_write_reg(client, FT5402_REG_PERIOD_ACTIVE,
- g_param_ft5402.ft5402_PERIOD_ACTIVE);
- if (err < 0) {
- dev_err(&client->dev, "%s:write PERIOD_ACTIVE failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FACE_DETECT_STATISTICS_TX_NUM,
- g_param_ft5402.ft5402_FACE_DETECT_STATISTICS_TX_NUM);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FACE_DETECT_STATISTICS_TX_NUM failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_MAX_TOUCH_VALUE_HIGH,
- g_param_ft5402.ft5402_MAX_TOUCH_VALUE>>8);
- if (err < 0) {
- dev_err(&client->dev, "%s:write MAX_TOUCH_VALUE_HIGH failed.\n", __func__);
- return err;
- }
- err = ft5402_write_reg(client, FT5402_REG_MAX_TOUCH_VALUE_LOW,
- g_param_ft5402.ft5402_MAX_TOUCH_VALUE);
- if (err < 0) {
- dev_err(&client->dev, "%s:write MAX_TOUCH_VALUE_LOW failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FACE_DETECT_MODE,
- g_param_ft5402.ft5402_FACE_DETECT_MODE);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FACE_DETECT_MODE failed.\n", __func__);
- return err;
- }
- err = ft5402_write_reg(client, FT5402_REG_DRAW_LINE_TH,
- g_param_ft5402.ft5402_DRAW_LINE_TH);
- if (err < 0) {
- dev_err(&client->dev, "%s:write DRAW_LINE_TH failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_POINTS_SUPPORTED,
- g_param_ft5402.ft5402_POINTS_SUPPORTED);
- if (err < 0) {
- dev_err(&client->dev, "%s:write POINTS_SUPPORTED failed.\n", __func__);
- return err;
- }
- err = ft5402_write_reg(client, FT5402_REG_ESD_FILTER_FRAME,
- g_param_ft5402.ft5402_ESD_FILTER_FRAME);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_ESD_FILTER_FRAME failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_POINTS_STABLE_MACRO,
- g_param_ft5402.ft5402_POINTS_STABLE_MACRO);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_POINTS_STABLE_MACRO failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_MIN_DELTA_X,
- g_param_ft5402.ft5402_MIN_DELTA_X);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_MIN_DELTA_X failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_MIN_DELTA_Y,
- g_param_ft5402.ft5402_MIN_DELTA_Y);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_MIN_DELTA_Y failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_MIN_DELTA_STEP,
- g_param_ft5402.ft5402_MIN_DELTA_STEP);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_MIN_DELTA_STEP failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_ESD_NOISE_MACRO,
- g_param_ft5402.ft5402_ESD_NOISE_MACRO);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_ESD_NOISE_MACRO failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_ESD_DIFF_VAL,
- g_param_ft5402.ft5402_ESD_DIFF_VAL);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_ESD_DIFF_VAL failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_ESD_NEGTIVE,
- g_param_ft5402.ft5402_ESD_NEGTIVE);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_ESD_NEGTIVE failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_ESD_FILTER_FRAMES,
- g_param_ft5402.ft5402_ESD_FILTER_FRAMES);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_ESD_FILTER_FRAMES failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_IO_LEVEL_SELECT,
- g_param_ft5402.ft5402_IO_LEVEL_SELECT);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_IO_LEVEL_SELECT failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_POINTID_DELAY_COUNT,
- g_param_ft5402.ft5402_POINTID_DELAY_COUNT);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_POINTID_DELAY_COUNT failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_LIFTUP_FILTER_MACRO,
- g_param_ft5402.ft5402_LIFTUP_FILTER_MACRO);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_LIFTUP_FILTER_MACRO failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_DIFF_HANDLE_MACRO,
- g_param_ft5402.ft5402_DIFF_HANDLE_MACRO);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_DIFF_HANDLE_MACRO failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_MIN_WATER,
- g_param_ft5402.ft5402_MIN_WATER);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_MIN_WATER failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_MAX_NOISE,
- g_param_ft5402.ft5402_MAX_NOISE);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_MAX_NOISE failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_WATER_START_RX,
- g_param_ft5402.ft5402_WATER_START_RX);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_WATER_START_RX failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_WATER_START_TX,
- g_param_ft5402.ft5402_WATER_START_TX);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_WATER_START_TX failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_HOST_NUMBER_SUPPORTED_MACRO,
- g_param_ft5402.ft5402_HOST_NUMBER_SUPPORTED_MACRO);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_HOST_NUMBER_SUPPORTED_MACRO failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_RAISE_THGROUP,
- g_param_ft5402.ft5402_RAISE_THGROUP);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_RAISE_THGROUP failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_CHARGER_STATE,
- g_param_ft5402.ft5402_CHARGER_STATE);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_CHARGER_STATE failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FILTERID_START,
- g_param_ft5402.ft5402_FILTERID_START);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FILTERID_START failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FRAME_FILTER_EN_MACRO,
- g_param_ft5402.ft5402_FRAME_FILTER_EN_MACRO);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FRAME_FILTER_EN_MACRO failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FRAME_FILTER_SUB_MAX_TH,
- g_param_ft5402.ft5402_FRAME_FILTER_SUB_MAX_TH);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FRAME_FILTER_SUB_MAX_TH failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FRAME_FILTER_ADD_MAX_TH,
- g_param_ft5402.ft5402_FRAME_FILTER_ADD_MAX_TH);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FRAME_FILTER_ADD_MAX_TH failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FRAME_FILTER_SKIP_START_FRAME,
- g_param_ft5402.ft5402_FRAME_FILTER_SKIP_START_FRAME);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FRAME_FILTER_SKIP_START_FRAME failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FRAME_FILTER_BAND_EN,
- g_param_ft5402.ft5402_FRAME_FILTER_BAND_EN);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FRAME_FILTER_BAND_EN failed.\n", __func__);
- return err;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_FT5402_FRAME_FILTER_BAND_WIDTH,
- g_param_ft5402.ft5402_FRAME_FILTER_BAND_WIDTH);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_FRAME_FILTER_BAND_WIDTH failed.\n", __func__);
- return err;
- }
-
- return err;
-}
-
-static int ft5402_get_other_param(struct i2c_client *client)
-{
- int err = 0;
- u8 value = 0x00;
- err = ft5402_read_reg(client, FT5402_REG_THGROUP, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write THGROUP failed.\n", __func__);
- return err;
- } else
- DBG("THGROUP=%02x\n", value);
- err = ft5402_read_reg(client, FT5402_REG_THPEAK, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write THPEAK failed.\n",
- __func__);
- return err;
- } else
- DBG("THPEAK=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_PWMODE_CTRL, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write PWMODE_CTRL failed.\n", __func__);
- return err;
- } else
- DBG("CTRL=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_PERIOD_ACTIVE,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write PERIOD_ACTIVE failed.\n", __func__);
- return err;
- } else
- DBG("PERIOD_ACTIVE=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_MAX_TOUCH_VALUE_HIGH,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write MAX_TOUCH_VALUE_HIGH failed.\n", __func__);
- return err;
- } else
- DBG("MAX_TOUCH_VALUE_HIGH=%02x\n", value);
- err = ft5402_read_reg(client, FT5402_REG_MAX_TOUCH_VALUE_LOW,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write MAX_TOUCH_VALUE_LOW failed.\n", __func__);
- return err;
- } else
- DBG("MAX_TOUCH_VALUE_LOW=%02x\n", value);
- err = ft5402_read_reg(client, FT5402_REG_FACE_DETECT_MODE,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FACE_DETECT_MODE failed.\n", __func__);
- return err;
- } else
- DBG("FACE_DEC_MODE=%02x\n", value);
- err = ft5402_read_reg(client, FT5402_REG_DRAW_LINE_TH,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write DRAW_LINE_TH failed.\n", __func__);
- return err;
- } else
- DBG("DRAW_LINE_TH=%02x\n", value);
- err = ft5402_read_reg(client, FT5402_REG_POINTS_SUPPORTED,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ft5402_POINTS_SUPPORTED failed.\n", __func__);
- return err;
- } else
- DBG("ft5402_POINTS_SUPPORTED=%02x\n", value);
- err = ft5402_read_reg(client, FT5402_REG_ESD_FILTER_FRAME,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_ESD_FILTER_FRAME failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_ESD_FILTER_FRAME=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_POINTS_STABLE_MACRO,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_POINTS_STABLE_MACRO failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_POINTS_STABLE_MACRO=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_MIN_DELTA_X,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_MIN_DELTA_X failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_MIN_DELTA_X=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_MIN_DELTA_Y,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_MIN_DELTA_Y failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_MIN_DELTA_Y=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_MIN_DELTA_STEP,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_MIN_DELTA_STEP failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_MIN_DELTA_STEP=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_ESD_NOISE_MACRO,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_ESD_NOISE_MACRO failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_ESD_NOISE_MACRO=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_ESD_DIFF_VAL,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_ESD_DIFF_VAL failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_ESD_DIFF_VAL=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_ESD_NEGTIVE,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_ESD_NEGTIVE failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_ESD_NEGTIVE=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_ESD_FILTER_FRAMES,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_ESD_FILTER_FRAMES failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_ESD_FILTER_FRAMES=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_IO_LEVEL_SELECT,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_IO_LEVEL_SELECT failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_IO_LEVEL_SELECT=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_POINTID_DELAY_COUNT,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_POINTID_DELAY_COUNT failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_POINTID_DELAY_COUNT=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_LIFTUP_FILTER_MACRO,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_LIFTUP_FILTER_MACRO failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_LIFTUP_FILTER_MACRO=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_DIFF_HANDLE_MACRO,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_DIFF_HANDLE_MACRO failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_DIFF_HANDLE_MACRO=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_MIN_WATER,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_MIN_WATER failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_MIN_WATER=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_MAX_NOISE,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_MAX_NOISE failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_MAX_NOISE=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_WATER_START_RX,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_WATER_START_RX failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_WATER_START_RX=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_WATER_START_TX,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_WATER_START_TX failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_WATER_START_TX=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_HOST_NUMBER_SUPPORTED_MACRO,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_HOST_NUMBER_SUPPORTED_MACRO failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_HOST_NUMBER_SUPPORTED_MACRO=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_RAISE_THGROUP,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_RAISE_THGROUP failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_RAISE_THGROUP=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_CHARGER_STATE,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_CHARGER_STATE failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_CHARGER_STATE=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FILTERID_START,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FILTERID_START failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FILTERID_START=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FRAME_FILTER_EN_MACRO,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FRAME_FILTER_EN_MACRO failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FRAME_FILTER_EN_MACRO=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FRAME_FILTER_SUB_MAX_TH,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FRAME_FILTER_SUB_MAX_TH failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FRAME_FILTER_SUB_MAX_TH=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FRAME_FILTER_ADD_MAX_TH,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FRAME_FILTER_ADD_MAX_TH failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FRAME_FILTER_ADD_MAX_TH=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FRAME_FILTER_SKIP_START_FRAME,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FRAME_FILTER_SKIP_START_FRAME failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FRAME_FILTER_SKIP_START_FRAME=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FRAME_FILTER_BAND_EN,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FRAME_FILTER_BAND_EN failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FRAME_FILTER_BAND_EN=%02x\n", value);
-
- err = ft5402_read_reg(client, FT5402_REG_FT5402_FRAME_FILTER_BAND_WIDTH,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:write FT5402_REG_FT5402_FRAME_FILTER_BAND_WIDTH failed.\n", __func__);
- return err;
- } else
- DBG("FT5402_REG_FT5402_FRAME_FILTER_BAND_WIDTH=%02x\n", value);
-
- return err;
-}
-int ft5402_get_ic_param(struct i2c_client *client)
-{
- int err = 0;
- int i = 0;
- u8 value = 0x00;
- u16 xvalue = 0x0000, yvalue = 0x0000;
-
- /*enter factory mode*/
- err = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE, FT5402_FACTORYMODE_VALUE);
- if (err < 0) {
- dev_err(&client->dev, "%s:enter factory mode failed.\n", __func__);
- goto RETURN_WORK;
- }
-
- for (i = 0; i < g_ft5402_tx_num; i++) {
- DBG("tx%d:", i);
- /*get tx order*/
- err = ft5402_get_tx_order(client, i, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get tx%d order.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- DBG("order=%d ", value);
- /*get tx cap*/
- err = ft5402_get_tx_cap(client, i, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get tx%d cap.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- DBG("cap=%02x\n", value);
- }
- /*get tx offset*/
- err = ft5402_get_tx_offset(client, 0, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get tx 0 offset.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("tx offset = %02x\n", value);
-
- /*get rx offset and cap*/
- for (i = 0; i < g_ft5402_rx_num; i++) {
- /*get rx order*/
- DBG("rx%d:", i);
- err = ft5402_get_rx_order(client, i, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get rx%d order.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- DBG("order=%d ", value);
- /*get rx cap*/
- err = ft5402_get_rx_cap(client, i, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get rx%d cap.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- DBG("cap=%02x ", value);
- err = ft5402_get_rx_offset(client, i, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get rx offset.\n",
- __func__);
- goto RETURN_WORK;
- }
- DBG("offset=%02x\n", value);
- }
-
- /*get scan select*/
- err = ft5402_get_scan_select(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get scan select.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("scan select = %02x\n", value);
-
- /*get tx number*/
- err = ft5402_get_tx_num(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get tx num.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("tx num = %02x\n", value);
- /*get rx number*/
- err = ft5402_get_rx_num(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get rx num.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("rx num = %02x\n", value);
-
- /*get gain*/
- err = ft5402_get_gain(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get gain.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("gain = %02x\n", value);
- /*get voltage*/
- err = ft5402_get_vol(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get voltage.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("voltage = %02x\n", value);
- /*get start rx*/
- err = ft5402_get_start_rx(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get start rx.\n",
- __func__);
- goto RETURN_WORK;
- } else
- DBG("start rx = %02x\n", value);
- /*get adc target*/
- err = ft5402_get_adc_target(client, &xvalue);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get adc target.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("ADC target = %02x\n", xvalue);
-
-
-RETURN_WORK:
- /*enter work mode*/
- err = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE, FT5402_WORKMODE_VALUE);
- if (err < 0) {
- dev_err(&client->dev, "%s:enter work mode failed.\n", __func__);
- goto ERR_EXIT;
- }
-
- /*get resolution*/
- err = ft5402_get_Resolution(client, &xvalue, &yvalue);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get resolution.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("resolution X = %d Y = %d\n", xvalue, yvalue);
-
-
- /*get face detect statistics tx num*/
- err = ft5402_get_face_detect_statistics_tx_num(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev,
- "%s:could not get face detect statistics tx num.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("FT5402_FACE_DETECT_STATISTICS_TX_NUM = %02x\n", value);
- /*get face detect pre value*/
- err = ft5402_get_face_detect_pre_value(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev,
- "%s:could not get face detect pre value.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("FT5402_FACE_DETECT_PRE_VALUE = %02x\n", value);
- /*get face detect num*/
- err = ft5402_get_face_detect_num(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get face detect num.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("face detect num = %02x\n", value);
-
- /*get min peak value*/
- err = ft5402_get_peak_value_min(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get min peak value.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("FT5402_BIGAREA_PEAK_VALUE_MIN = %02x\n", value);
- /*get diff value over num*/
- err = ft5402_get_diff_value_over_num(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get diff value over num.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("FT5402_BIGAREA_DIFF_VALUE_OVER_NUM = %02x\n", value);
- /*get customer id*/
- err = ft5402_get_customer_id(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get customer id.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("FT5402_CUSTOMER_ID = %02x\n", value);
- /*get kx*/
- err = ft5402_get_kx(client, &xvalue);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get kx.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("kx = %02x\n", xvalue);
- /*get ky*/
- err = ft5402_get_ky(client, &xvalue);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get ky.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("ky = %02x\n", xvalue);
- /*get lemda x*/
- err = ft5402_get_lemda_x(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get lemda x.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("lemda x = %02x\n", value);
- /*get lemda y*/
- err = ft5402_get_lemda_y(client,
- &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get lemda y.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("lemda y = %02x\n", value);
- /*get pos x*/
- err = ft5402_get_pos_x(client, &value);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not get pos x.\n",
- __func__);
- goto ERR_EXIT;
- } else
- DBG("pos x = %02x\n", value);
-
- err = ft5402_get_other_param(client);
-
-ERR_EXIT:
- return err;
-}
-
-int ft5402_Init_IC_Param(struct i2c_client *client)
-{
- int err = 0;
- int i = 0;
-
- /*enter factory mode*/
- err = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE, FT5402_FACTORYMODE_VALUE);
- if (err < 0) {
- dev_err(&client->dev, "%s:enter factory mode failed.\n", __func__);
- goto RETURN_WORK;
- }
-
- for (i = 0; i < g_ft5402_tx_num; i++) {
- if (g_ft5402_tx_order[i] != 0xFF) {
- /*set tx order*/
- err = ft5402_set_tx_order(client, i, g_ft5402_tx_order[i]);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set tx%d order.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- }
- /*set tx cap*/
- err = ft5402_set_tx_cap(client, i, g_ft5402_tx_cap[i]);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set tx%d cap.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- }
- /*set tx offset*/
- err = ft5402_set_tx_offset(client, 0, g_ft5402_tx_offset);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set tx 0 offset.\n",
- __func__);
- goto RETURN_WORK;
- }
-
- /*set rx offset and cap*/
- for (i = 0; i < g_ft5402_rx_num; i++) {
- /*set rx order*/
- err = ft5402_set_rx_order(client, i, g_ft5402_rx_order[i]);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set rx%d order.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- /*set rx cap*/
- err = ft5402_set_rx_cap(client, i, g_ft5402_rx_cap[i]);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set rx%d cap.\n",
- __func__, i);
- goto RETURN_WORK;
- }
- }
- for (i = 0; i < g_ft5402_rx_num/2; i++) {
- err = ft5402_set_rx_offset(client, i*2, g_ft5402_rx_offset[i]>>4);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set rx offset.\n",
- __func__);
- goto RETURN_WORK;
- }
- err = ft5402_set_rx_offset(client, i*2+1, g_ft5402_rx_offset[i]&0x0F);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set rx offset.\n",
- __func__);
- goto RETURN_WORK;
- }
- }
-
- /*set scan select*/
- err = ft5402_set_scan_select(client, g_ft5402_scanselect);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set scan select.\n",
- __func__);
- goto RETURN_WORK;
- }
-
- /*set tx number*/
- err = ft5402_set_tx_num(client, g_ft5402_tx_num);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set tx num.\n",
- __func__);
- goto RETURN_WORK;
- }
- /*set rx number*/
- err = ft5402_set_rx_num(client, g_ft5402_rx_num);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set rx num.\n",
- __func__);
- goto RETURN_WORK;
- }
-
- /*set gain*/
- err = ft5402_set_gain(client, g_ft5402_gain);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set gain.\n",
- __func__);
- goto RETURN_WORK;
- }
- /*set voltage*/
- err = ft5402_set_vol(client, g_ft5402_voltage);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set voltage.\n",
- __func__);
- goto RETURN_WORK;
- }
-
- err = ft5402_write_reg(client, FT5402_REG_ADC_TARGET_HIGH,
- g_param_ft5402.ft5402_ADC_TARGET>>8);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ADC_TARGET_HIGH failed.\n", __func__);
- return err;
- }
- err = ft5402_write_reg(client, FT5402_REG_ADC_TARGET_LOW,
- g_param_ft5402.ft5402_ADC_TARGET);
- if (err < 0) {
- dev_err(&client->dev, "%s:write ADC_TARGET_LOW failed.\n", __func__);
- return err;
- }
-
-RETURN_WORK:
- /*enter work mode*/
- err = ft5402_write_reg(client, FT5402_REG_DEVICE_MODE, FT5402_WORKMODE_VALUE);
- if (err < 0) {
- dev_err(&client->dev, "%s:enter work mode failed.\n", __func__);
- goto ERR_EXIT;
- }
-
- /*set resolution*/
- err = ft5402_set_Resolution(client, g_param_ft5402.ft5402_RESOLUTION_X,
- g_param_ft5402.ft5402_RESOLUTION_Y);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set resolution.\n",
- __func__);
- goto ERR_EXIT;
- }
-
- /*set face detect statistics tx num*/
- err = ft5402_set_face_detect_statistics_tx_num(client,
- g_param_ft5402.ft5402_FACE_DETECT_STATISTICS_TX_NUM);
- if (err < 0) {
- dev_err(&client->dev,
- "%s:could not set face detect statistics tx num.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set face detect pre value*/
- err = ft5402_set_face_detect_pre_value(client,
- g_param_ft5402.ft5402_FACE_DETECT_PRE_VALUE);
- if (err < 0) {
- dev_err(&client->dev,
- "%s:could not set face detect pre value.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set face detect num*/
- err = ft5402_set_face_detect_num(client,
- g_param_ft5402.ft5402_FACE_DETECT_NUM);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set face detect num.\n",
- __func__);
- goto ERR_EXIT;
- }
-
- /*set min peak value*/
- err = ft5402_set_peak_value_min(client,
- g_param_ft5402.ft5402_BIGAREA_PEAK_VALUE_MIN);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set min peak value.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set diff value over num*/
- err = ft5402_set_diff_value_over_num(client,
- g_param_ft5402.ft5402_BIGAREA_DIFF_VALUE_OVER_NUM);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set diff value over num.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set customer id*/
- err = ft5402_set_customer_id(client,
- g_param_ft5402.ft5402_CUSTOMER_ID);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set customer id.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set kx*/
- err = ft5402_set_kx(client, g_param_ft5402.ft5402_KX);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set kx.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set ky*/
- err = ft5402_set_ky(client, g_param_ft5402.ft5402_KY);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set ky.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set lemda x*/
- err = ft5402_set_lemda_x(client,
- g_param_ft5402.ft5402_LEMDA_X);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set lemda x.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set lemda y*/
- err = ft5402_set_lemda_y(client,
- g_param_ft5402.ft5402_LEMDA_Y);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set lemda y.\n",
- __func__);
- goto ERR_EXIT;
- }
- /*set pos x*/
- err = ft5402_set_pos_x(client, g_param_ft5402.ft5402_DIRECTION);
- if (err < 0) {
- dev_err(&client->dev, "%s:could not set pos x.\n",
- __func__);
- goto ERR_EXIT;
- }
-
- err = ft5402_set_other_param(client);
-
-ERR_EXIT:
- return err;
-}
-
-
-char dst[512];
-static char * ft5402_sub_str(char * src, int n)
-{
- char *p = src;
- int i;
- int m = 0;
- int len = strlen(src);
-
- while (n >= 1 && m <= len) {
- i = 0;
- dst[10] = ' ';
- n--;
- while ( *p != ',' && *p != ' ') {
- dst[i++] = *(p++);
- m++;
- if (i >= len)
- break;
- }
- dst[i++] = '\0';
- p++;
- }
- return dst;
-}
-static int ft5402_GetInISize(char *config_name)
-{
- struct file *pfile = NULL;
- struct inode *inode;
- unsigned long magic;
- off_t fsize = 0;
- char filepath[128];
- memset(filepath, 0, sizeof(filepath));
-
- sprintf(filepath, "%s%s", FT5402_INI_FILEPATH, config_name);
-
- if (NULL == pfile)
- pfile = filp_open(filepath, O_RDONLY, 0);
-
- if (IS_ERR(pfile)) {
- pr_err("error occured while opening file %s.\n", filepath);
- return -EIO;
- }
-
- inode = pfile->f_dentry->d_inode;
- magic = inode->i_sb->s_magic;
- fsize = inode->i_size;
- filp_close(pfile, NULL);
- return fsize;
-}
-
-static int ft5x0x_ReadInIData(char *config_name,
- char *config_buf)
-{
- struct file *pfile = NULL;
- struct inode *inode;
- unsigned long magic;
- off_t fsize;
- char filepath[128];
- loff_t pos;
- mm_segment_t old_fs;
-
- memset(filepath, 0, sizeof(filepath));
- sprintf(filepath, "%s%s", FT5402_INI_FILEPATH, config_name);
- if (NULL == pfile)
- pfile = filp_open(filepath, O_RDONLY, 0);
- if (IS_ERR(pfile)) {
- pr_err("error occured while opening file %s.\n", filepath);
- return -EIO;
- }
-
- inode = pfile->f_dentry->d_inode;
- magic = inode->i_sb->s_magic;
- fsize = inode->i_size;
- old_fs = get_fs();
- set_fs(KERNEL_DS);
- pos = 0;
- vfs_read(pfile, config_buf, fsize, &pos);
- filp_close(pfile, NULL);
- set_fs(old_fs);
-
- return 0;
-}
-
-int ft5402_Get_Param_From_Ini(char *config_name)
-{
- char key[64];
- char value[512];
- char section[64];
- int i = 0;//,ret=0;
- int j = 0;
- char *filedata = NULL;
- unsigned char legal_byte1 = 0x00;
- unsigned char legal_byte2 = 0x00;
-
- int inisize = ft5402_GetInISize(config_name);
-
- if (inisize <= 0) {
- pr_err("%s ERROR:Get firmware size failed\n",
- __func__);
- return -EIO;
- }
-
- filedata = kmalloc(inisize + 1, GFP_ATOMIC);
-
- if (ft5x0x_ReadInIData(config_name, filedata)) {
- pr_err("%s() - ERROR: request_firmware failed\n",
- __func__);
- kfree(filedata);
- return -EIO;
- }
-
- /*check ini if it is illegal*/
- sprintf(section, "%s", FT5402_APP_LEGAL);
- sprintf(key, "%s", FT5402_APP_LEGAL_BYTE_1_STR);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- legal_byte1 = atoi(value);
- DBG("legal_byte1=%s\n", value);
- sprintf(key, "%s", FT5402_APP_LEGAL_BYTE_2_STR);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- legal_byte2 = atoi(value);
- DBG("lega2_byte1=%s\n", value);
- if(FT5402_APP_LEGAL_BYTE_1_VALUE == legal_byte1 &&
- FT5402_APP_LEGAL_BYTE_2_VALUE == legal_byte2)
- DBG("the ini file is valid\n");
- else {
- pr_err("[FTS]-----the ini file is invalid!please check it.\n");
- goto ERROR_RETURN;
- }
-
- /*get ini param*/
- sprintf(section, "%s", FT5402_APP_NAME);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_KX = atoi(value);
- DBG("ft5402_KX=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_KY = atoi(value);
- DBG("ft5402_KY=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_LEMDA_X = atoi(value);
- DBG("ft5402_LEMDA_X=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_LEMDA_Y = atoi(value);
- DBG("ft5402_LEMDA_Y=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_RESOLUTION_X = atoi(value);
- DBG("ft5402_RESOLUTION_X=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_RESOLUTION_Y = atoi(value);
- DBG("ft5402_RESOLUTION_Y=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_DIRECTION= atoi(value);
- DBG("ft5402_DIRECTION=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FACE_DETECT_PRE_VALUE = atoi(value);
- DBG("ft5402_FACE_DETECT_PRE_VALUE=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FACE_DETECT_NUM = atoi(value);
- DBG("ft5402_FACE_DETECT_NUM=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_BIGAREA_PEAK_VALUE_MIN = atoi(value);/*The min value to be decided as the big point*/
- DBG("ft5402_BIGAREA_PEAK_VALUE_MIN=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_BIGAREA_DIFF_VALUE_OVER_NUM = atoi(value);/*The min big points of the big area*/
- DBG("ft5402_BIGAREA_DIFF_VALUE_OVER_NUM=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_CUSTOMER_ID = atoi(value);
- DBG("ft5402_CUSTOM_ID=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_PERIOD_ACTIVE = atoi(value);
- DBG("ft5402_PERIOD_ACTIVE=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FACE_DETECT_STATISTICS_TX_NUM = atoi(value);
- DBG("ft5402_FACE_DETECT_STATISTICS_TX_NUM=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_THGROUP = atoi(value);
- DBG("ft5402_THGROUP=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_THPEAK = atoi(value);
- DBG("ft5402_THPEAK=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FACE_DETECT_MODE = atoi(value);
- DBG("ft5402_FACE_DETECT_MODE=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_MAX_TOUCH_VALUE = atoi(value);
- DBG("ft5402_MAX_TOUCH_VALUE=%s\n", value);
-
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_PWMODE_CTRL= atoi(value);
- DBG("ft5402_PWMODE_CTRL=%s\n", value);
-
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
-
- i++;
- g_param_ft5402.ft5402_DRAW_LINE_TH = atoi(value);
- DBG("ft5402_DRAW_LINE_TH=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_POINTS_SUPPORTED= atoi(value);
- DBG("ft5402_POINTS_SUPPORTED=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_START_RX = atoi(value);
- DBG("ft5402_START_RX=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
-
- g_param_ft5402.ft5402_ADC_TARGET = atoi(value);
- DBG("ft5402_ADC_TARGET=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
-
- g_param_ft5402.ft5402_ESD_FILTER_FRAME = atoi(value);
- DBG("ft5402_ESD_FILTER_FRAME=%s\n", value);
-
-/*********************************************************************/
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_ft5402_tx_num = atoi(value);
- DBG("ft5402_tx_num=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_ft5402_rx_num = atoi(value);
- DBG("ft5402_rx_num=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_ft5402_gain = atoi(value);
- DBG("ft5402_gain=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_ft5402_voltage = atoi(value);
- DBG("ft5402_voltage=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_ft5402_scanselect = atoi(value);
- DBG("ft5402_scanselect=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- for(j = 0; j < g_ft5402_tx_num; j++)
- {
- char * psrc = value;
- g_ft5402_tx_order[j] = atoi(ft5402_sub_str(psrc, j+1));
- }
- DBG("ft5402_tx_order=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_ft5402_tx_offset = atoi(value);
- DBG("ft5402_tx_offset=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- for(j = 0; j < g_ft5402_tx_num; j++)
- {
- char * psrc = value;
- g_ft5402_tx_cap[j] = atoi(ft5402_sub_str(psrc, j+1));
- }
- DBG("ft5402_tx_cap=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- for(j = 0; j < g_ft5402_rx_num; j++)
- {
- char * psrc = value;
- g_ft5402_rx_order[j] = atoi(ft5402_sub_str(psrc, j+1));
- }
- DBG("ft5402_rx_order=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- for(j = 0; j < g_ft5402_rx_num/2; j++)
- {
- char * psrc = value;
- g_ft5402_rx_offset[j] = atoi(ft5402_sub_str(psrc, j+1));
- }
- DBG("ft5402_rx_offset=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- for(j = 0; j < g_ft5402_rx_num; j++)
- {
- char * psrc = value;
- g_ft5402_rx_cap[j] = atoi(ft5402_sub_str(psrc, j+1));
- }
- DBG("ft5402_rx_cap=%s\n", value);
-
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_POINTS_STABLE_MACRO = atoi(value);
- DBG("ft5402_POINTS_STABLE_MACRO=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_MIN_DELTA_X = atoi(value);
- DBG("ft5402_MIN_DELTA_X=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_MIN_DELTA_Y = atoi(value);
- DBG("ft5402_MIN_DELTA_Y=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_MIN_DELTA_STEP = atoi(value);
- DBG("ft5402_MIN_DELTA_STEP=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_ESD_NOISE_MACRO = atoi(value);
- DBG("ft5402_ESD_NOISE_MACRO=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_ESD_DIFF_VAL = atoi(value);
- DBG("ft5402_ESD_DIFF_VAL=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_ESD_NEGTIVE = atoi(value);
- DBG("ft5402_ESD_NEGTIVE=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_ESD_FILTER_FRAMES = atoi(value);
- DBG("ft5402_ESD_FILTER_FRAMES=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_IO_LEVEL_SELECT = atoi(value);
- DBG("ft5402_IO_LEVEL_SELECT=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_POINTID_DELAY_COUNT = atoi(value);
- DBG("ft5402_POINTID_DELAY_COUNT=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_LIFTUP_FILTER_MACRO = atoi(value);
- DBG("ft5402_LIFTUP_FILTER_MACRO=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_DIFF_HANDLE_MACRO = atoi(value);
- DBG("ft5402_DIFF_HANDLE_MACRO=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_MIN_WATER = atoi(value);
- DBG("ft5402_MIN_WATER=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_MAX_NOISE = atoi(value);
- DBG("ft5402_MAX_NOISE=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_WATER_START_RX = atoi(value);
- DBG("ft5402_WATER_START_RX=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_WATER_START_TX = atoi(value);
- DBG("ft5402_WATER_START_TX=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_HOST_NUMBER_SUPPORTED_MACRO = atoi(value);
- DBG("ft5402_HOST_NUMBER_SUPPORTED_MACRO=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_RAISE_THGROUP = atoi(value);
- DBG("ft5402_RAISE_THGROUP=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_CHARGER_STATE = atoi(value);
- DBG("ft5402_CHARGER_STATE=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FILTERID_START = atoi(value);
- DBG("ft5402_FILTERID_START=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FRAME_FILTER_EN_MACRO = atoi(value);
- DBG("ft5402_FRAME_FILTER_EN_MACRO=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FRAME_FILTER_SUB_MAX_TH = atoi(value);
- DBG("ft5402_FRAME_FILTER_SUB_MAX_TH=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FRAME_FILTER_ADD_MAX_TH = atoi(value);
- DBG("ft5402_FRAME_FILTER_ADD_MAX_TH=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FRAME_FILTER_SKIP_START_FRAME = atoi(value);
- DBG("ft5402_FRAME_FILTER_SKIP_START_FRAME=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FRAME_FILTER_BAND_EN = atoi(value);
- DBG("ft5402_FRAME_FILTER_BAND_EN=%s\n", value);
-
- sprintf(key, "%s", String_Param_FT5402[i]);
- if (ini_get_key(filedata,section,key,value)<0)
- goto ERROR_RETURN;
- i++;
- g_param_ft5402.ft5402_FRAME_FILTER_BAND_WIDTH = atoi(value);
- DBG("ft5402_FRAME_FILTER_BAND_WIDTH=%s\n", value);
-
-
- if (filedata)
- kfree(filedata);
- return 0;
-ERROR_RETURN:
- if (filedata)
- kfree(filedata);
- return -1;
-}
-
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_config.h b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_config.h deleted file mode 100755 index b0c63889..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_config.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __FT5402_CONFIG_H__
-#define __FT5402_CONFIG_H__
-/*FT5402 config*/
-
-
-#define FT5402_START_RX 0
-#define FT5402_ADC_TARGET 8500
-#define FT5402_KX 120
-#define FT5402_KY 120
-#define FT5402_RESOLUTION_X 480
-#define FT5402_RESOLUTION_Y 800
-#define FT5402_LEMDA_X 0
-#define FT5402_LEMDA_Y 0
-#define FT5402_PWMODE_CTRL 1
-#define FT5402_POINTS_SUPPORTED 5
-#define FT5402_DRAW_LINE_TH 150
-#define FT5402_FACE_DETECT_MODE 0
-#define FT5402_FACE_DETECT_STATISTICS_TX_NUM 3
-#define FT5402_FACE_DETECT_PRE_VALUE 20
-#define FT5402_FACE_DETECT_NUM 10
-#define FT5402_THGROUP 25
-#define FT5402_THPEAK 60
-#define FT5402_BIGAREA_PEAK_VALUE_MIN 100
-#define FT5402_BIGAREA_DIFF_VALUE_OVER_NUM 50
-#define FT5402_MIN_DELTA_X 2
-#define FT5402_MIN_DELTA_Y 2
-#define FT5402_MIN_DELTA_STEP 2
-#define FT5402_ESD_DIFF_VAL 20
-#define FT5402_ESD_NEGTIVE -50
-#define FT5402_ESD_FILTER_FRAME 10
-#define FT5402_MAX_TOUCH_VALUE 600
-#define FT5402_CUSTOMER_ID 121
-#define FT5402_IO_LEVEL_SELECT 0
-#define FT5402_DIRECTION 1
-#define FT5402_POINTID_DELAY_COUNT 3
-#define FT5402_LIFTUP_FILTER_MACRO 1
-#define FT5402_POINTS_STABLE_MACRO 1
-#define FT5402_ESD_NOISE_MACRO 1
-#define FT5402_RV_G_PERIOD_ACTIVE 16
-#define FT5402_DIFFDATA_HANDLE 1
-#define FT5402_MIN_WATER_VAL -50
-#define FT5402_MAX_NOISE_VAL 10
-#define FT5402_WATER_HANDLE_START_RX 0
-#define FT5402_WATER_HANDLE_START_TX 0
-#define FT5402_HOST_NUMBER_SUPPORTED 1
-#define FT5402_RV_G_RAISE_THGROUP 30
-#define FT5402_RV_G_CHARGER_STATE 0
-#define FT5402_RV_G_FILTERID_START 2
-#define FT5402_FRAME_FILTER_EN 1
-#define FT5402_FRAME_FILTER_SUB_MAX_TH 2
-#define FT5402_FRAME_FILTER_ADD_MAX_TH 2
-#define FT5402_FRAME_FILTER_SKIP_START_FRAME 6
-#define FT5402_FRAME_FILTER_BAND_EN 1
-#define FT5402_FRAME_FILTER_BAND_WIDTH 128
-#define FT5402_OTP_PARAM_ID 0
-
-
-unsigned char g_ft5402_tx_num = 27;
-unsigned char g_ft5402_rx_num = 16;
-unsigned char g_ft5402_gain = 10;
-unsigned char g_ft5402_voltage = 3;
-unsigned char g_ft5402_scanselect = 12;
-unsigned char g_ft5402_tx_order[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26};
-unsigned char g_ft5402_tx_offset = 2;
-unsigned char g_ft5402_tx_cap[] = {42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42,42};
-unsigned char g_ft5402_rx_order[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};
-unsigned char g_ft5402_rx_offset[] = {68,68,68,68,68,68,68,68};
-unsigned char g_ft5402_rx_cap[] = {84,84,84,84,84,84,84,84,84,84,84,84,84,84,84,84};
-
-
-#endif
\ No newline at end of file diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_ini_config.h b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_ini_config.h deleted file mode 100755 index 138f42e2..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5402_ini_config.h +++ /dev/null @@ -1,411 +0,0 @@ -#ifndef __LINUX_FT5402_INI_CONFIG_H__
-#define __LINUX_FT5402_INI_CONFIG_H
-
-
-/*Init param register address*/
-/*factory mode register from 14-131*/
-#define FT5402_REG_TX_NUM 0x03
-#define FT5402_REG_RX_NUM 0x04
-#define FT5402_REG_VOLTAGE 0x05
-#define FT5402_REG_GAIN 0x07
-#define FT5402_REG_SCAN_SELECT 0x4E
-#define FT5402_REG_TX_ORDER_START 0x50
-#define FT5402_REG_TX_CAP_START 0x78
-#define FT5402_REG_TX_OFFSET_START 0xBF
-#define FT5402_REG_RX_ORDER_START 0xeb
-#define FT5402_REG_RX_CAP_START 0xA0
-#define FT5402_REG_RX_OFFSET_START 0xD3
-#define FT5402_REG_START_RX 0x06
-#define FT5402_REG_ADC_TARGET_HIGH 0x08
-#define FT5402_REG_ADC_TARGET_LOW 0x09
-
-
-#define FT5402_REG_DEVICE_MODE 0x00
-
-
-/*work mode register from 0-13(0,1,12,13verify or Reserved)and 132-177(159 Reserved)*/
-#define FT5402_REG_THGROUP (0x00+0x80)
-#define FT5402_REG_THPEAK (0x01+0x80)
-#define FT5402_REG_PWMODE_CTRL (0x06+0x80)
-#define FT5402_REG_PERIOD_ACTIVE (0x59+0x80)
-#define FT5402_REG_POINTS_SUPPORTED (0x0A+0x80)
-#define FT5402_REG_ESD_FILTER_FRAME (0x4F+0x80)
-
-#define FT5402_REG_RESOLUTION_X_H (0x18+0x80)
-#define FT5402_REG_RESOLUTION_X_L (0x19+0x80)
-#define FT5402_REG_RESOLUTION_Y_H (0x1a+0x80)
-#define FT5402_REG_RESOLUTION_Y_L (0x1b+0x80)
-#define FT5402_REG_KX_H (0x1c+0x80)
-#define FT5402_REG_KX_L (0x9d)
-#define FT5402_REG_KY_H (0x9e)
-#define FT5402_REG_KY_L (0x1f+0x80)
-#define FT5402_REG_CUSTOMER_ID (0xA8)
-#define FT5402_REG_DRAW_LINE_TH (0xAe)
-#define FT5402_REG_FACE_DETECT_MODE (0xB0)
-#define FT5402_REG_MAX_TOUCH_VALUE_HIGH (0xD0)
-#define FT5402_REG_MAX_TOUCH_VALUE_LOW (0xD1)
-
-#define FT5402_REG_DIRECTION (0x53+0x80)
-#define FT5402_REG_LEMDA_X (0x41+0x80)
-#define FT5402_REG_LEMDA_Y (0x42+0x80)
-#define FT5402_REG_FACE_DETECT_STATISTICS_TX_NUM (0x43+0x80)
-#define FT5402_REG_FACE_DETECT_PRE_VALUE (0x44+0x80)
-#define FT5402_REG_FACE_DETECT_NUM (0x45+0x80)
-#define FT5402_REG_BIGAREA_PEAK_VALUE_MIN (0x33+0x80)
-#define FT5402_REG_BIGAREA_DIFF_VALUE_OVER_NUM (0x34+0x80)
-
-/**************************************************************************/
-#define FT5402_REG_FT5402_POINTS_STABLE_MACRO (0x57+0x80)
-#define FT5402_REG_FT5402_MIN_DELTA_X (0x4a+0x80)
-#define FT5402_REG_FT5402_MIN_DELTA_Y (0x4b+0x80)
-#define FT5402_REG_FT5402_MIN_DELTA_STEP (0x4c+0x80)
-
-#define FT5402_REG_FT5402_ESD_NOISE_MACRO (0x58+0x80)
-#define FT5402_REG_FT5402_ESD_DIFF_VAL (0x4d+0x80)
-#define FT5402_REG_FT5402_ESD_NEGTIVE (0xCe)
-#define FT5402_REG_FT5402_ESD_FILTER_FRAMES (0x4f+0x80)
-
-#define FT5402_REG_FT5402_IO_LEVEL_SELECT (0x52+0x80)
-
-#define FT5402_REG_FT5402_POINTID_DELAY_COUNT (0x54+0x80)
-
-#define FT5402_REG_FT5402_LIFTUP_FILTER_MACRO (0x55+0x80)
-
-#define FT5402_REG_FT5402_DIFF_HANDLE_MACRO (0x5A+0x80)
-#define FT5402_REG_FT5402_MIN_WATER (0x5B+0x80)
-#define FT5402_REG_FT5402_MAX_NOISE (0x5C+0x80)
-#define FT5402_REG_FT5402_WATER_START_RX (0x5D+0x80)
-#define FT5402_REG_FT5402_WATER_START_TX (0xDE)
-
-#define FT5402_REG_FT5402_HOST_NUMBER_SUPPORTED_MACRO (0x38+0x80)
-#define FT5402_REG_FT5402_RAISE_THGROUP (0x36+0x80)
-#define FT5402_REG_FT5402_CHARGER_STATE (0x35+0x80)
-
-#define FT5402_REG_FT5402_FILTERID_START (0x37+0x80)
-
-#define FT5402_REG_FT5402_FRAME_FILTER_EN_MACRO (0x5F+0x80)
-#define FT5402_REG_FT5402_FRAME_FILTER_SUB_MAX_TH (0x60+0x80)
-#define FT5402_REG_FT5402_FRAME_FILTER_ADD_MAX_TH (0x61+0x80)
-#define FT5402_REG_FT5402_FRAME_FILTER_SKIP_START_FRAME (0x62+0x80)
-#define FT5402_REG_FT5402_FRAME_FILTER_BAND_EN (0x63+0x80)
-#define FT5402_REG_FT5402_FRAME_FILTER_BAND_WIDTH (0x64+0x80)
-/**************************************************************************/
-
-#define FT5402_REG_TEST_MODE 0x04
-#define FT5402_REG_TEST_MODE_2 0x05
-#define FT5402_TX_TEST_MODE_1 0x28
-#define FT5402_RX_TEST_MODE_1 0x1E
-#define FT5402_FACTORYMODE_VALUE 0x40
-#define FT5402_WORKMODE_VALUE 0x00
-
-/************************************************************************/
-/* string */
-/************************************************************************/
-#define STRING_FT5402_KX "FT5X02_KX"
-#define STRING_FT5402_KY "FT5X02_KY"
-#define STRING_FT5402_LEMDA_X "FT5X02_LEMDA_X"
-#define STRING_FT5402_LEMDA_Y "FT5X02_LEMDA_Y"
-#define STRING_FT5402_RESOLUTION_X "FT5X02_RESOLUTION_X"
-#define STRING_FT5402_RESOLUTION_Y "FT5X02_RESOLUTION_Y"
-#define STRING_FT5402_DIRECTION "FT5X02_DIRECTION"
-
-
-
-#define STRING_FT5402_FACE_DETECT_PRE_VALUE "FT5X02_FACE_DETECT_PRE_VALUE"
-#define STRING_FT5402_FACE_DETECT_NUM "FT5X02_FACE_DETECT_NUM"
-#define STRING_FT5402_BIGAREA_PEAK_VALUE_MIN "FT5X02_BIGAREA_PEAK_VALUE_MIN"
-#define STRING_FT5402_BIGAREA_DIFF_VALUE_OVER_NUM "FT5X02_BIGAREA_DIFF_VALUE_OVER_NUM"
-#define STRING_FT5402_CUSTOMER_ID "FT5X02_CUSTOMER_ID"
-#define STRING_FT5402_PERIOD_ACTIVE "FT5X02_RV_G_PERIOD_ACTIVE"
-#define STRING_FT5402_FACE_DETECT_STATISTICS_TX_NUM "FT5X02_FACE_DETECT_STATISTICS_TX_NUM"
-
-#define STRING_FT5402_THGROUP "FT5X02_THGROUP"
-#define STRING_FT5402_THPEAK "FT5X02_THPEAK"
-#define STRING_FT5402_FACE_DETECT_MODE "FT5X02_FACE_DETECT_MODE"
-#define STRING_FT5402_MAX_TOUCH_VALUE "FT5X02_MAX_TOUCH_VALUE"
-
-#define STRING_FT5402_PWMODE_CTRL "FT5X02_PWMODE_CTRL"
-#define STRING_FT5402_DRAW_LINE_TH "FT5X02_DRAW_LINE_TH"
-
-#define STRING_FT5402_POINTS_SUPPORTED "FT5X02_POINTS_SUPPORTED"
-
-#define STRING_FT5402_START_RX "FT5X02_START_RX"
-#define STRING_FT5402_ADC_TARGET "FT5X02_ADC_TARGET"
-#define STRING_FT5402_ESD_FILTER_FRAME "FT5X02_ESD_FILTER_FRAME"
-
-#define STRING_FT5402_POINTS_STABLE_MACRO "FT5X02_POINTS_STABLE_MACRO"
-#define STRING_FT5402_MIN_DELTA_X "FT5X02_MIN_DELTA_X"
-#define STRING_FT5402_MIN_DELTA_Y "FT5X02_MIN_DELTA_Y"
-#define STRING_FT5402_MIN_DELTA_STEP "FT5X02_MIN_DELTA_STEP"
-
-#define STRING_FT5402_ESD_NOISE_MACRO "FT5X02_ESD_NOISE_MACRO"
-#define STRING_FT5402_ESD_DIFF_VAL "FT5X02_ESD_DIFF_VAL"
-#define STRING_FT5402_ESD_NEGTIVE "FT5X02_ESD_NEGTIVE"
-#define STRING_FT5402_ESD_FILTER_FRAME "FT5X02_ESD_FILTER_FRAME"
-
-#define STRING_FT5402_IO_LEVEL_SELECT "FT5X02_IO_LEVEL_SELECT"
-#define STRING_FT5402_POINTID_DELAY_COUNT "FT5X02_POINTID_DELAY_COUNT"
-
-#define STRING_FT5402_LIFTUP_FILTER_MACRO "FT5X02_LIFTUP_FILTER_MACRO"
-
-#define STRING_FT5402_DIFFDATA_HANDLE "FT5X02_DIFFDATA_HANDLE" //_MACRO
-#define STRING_FT5402_MIN_WATER_VAL "FT5X02_MIN_WATER_VAL"
-#define STRING_FT5402_MAX_NOISE_VAL "FT5X02_MAX_NOISE_VAL"
-#define STRING_FT5402_WATER_HANDLE_START_RX "FT5X02_WATER_HANDLE_START_RX"
-#define STRING_FT5402_WATER_HANDLE_START_TX "FT5X02_WATER_HANDLE_START_TX"
-
-#define STRING_FT5402_HOST_NUMBER_SUPPORTED "FT5X02_HOST_NUMBER_SUPPORTED"
-#define STRING_FT5402_RV_G_RAISE_THGROUP "FT5X02_RV_G_RAISE_THGROUP"
-#define STRING_FT5402_RV_G_CHARGER_STATE "FT5X02_RV_G_CHARGER_STATE"
-
-#define STRING_FT5402_RV_G_FILTERID_START "FT5X02_RV_G_FILTERID_START"
-
-#define STRING_FT5402_FRAME_FILTER_EN "FT5X02_FRAME_FILTER_EN"
-#define STRING_FT5402_FRAME_FILTER_SUB_MAX_TH "FT5X02_FRAME_FILTER_SUB_MAX_TH"
-#define STRING_FT5402_FRAME_FILTER_ADD_MAX_TH "FT5X02_FRAME_FILTER_ADD_MAX_TH"
-#define STRING_FT5402_FRAME_FILTER_SKIP_START_FRAME "FT5X02_FRAME_FILTER_SKIP_START_FRAME"
-#define STRING_FT5402_FRAME_FILTER_BAND_EN "FT5X02_FRAME_FILTER_BAND_EN"
-#define STRING_FT5402_FRAME_FILTER_BAND_WIDTH "FT5X02_FRAME_FILTER_BAND_WIDTH"
-
-
-#define STRING_ft5402_tx_num "FT5X02_tx_num"
-#define STRING_ft5402_rx_num "FT5X02_rx_num"
-#define STRING_ft5402_gain "FT5X02_gain"
-#define STRING_ft5402_voltage "FT5X02_voltage"
-#define STRING_ft5402_scanselect "FT5X02_scanselect"
-
-#define STRING_ft5402_tx_order "FT5X02_tx_order"
-#define STRING_ft5402_tx_offset "FT5X02_tx_offset"
-#define STRING_ft5402_tx_cap "FT5X02_tx_cap"
-
-#define STRING_ft5402_rx_order "FT5X02_rx_order"
-#define STRING_ft5402_rx_offset "FT5X02_rx_offset"
-#define STRING_ft5402_rx_cap "FT5X02_rx_cap"
-
-struct Struct_Param_FT5402 {
- short ft5402_KX;
- short ft5402_KY;
- unsigned char ft5402_LEMDA_X;
- unsigned char ft5402_LEMDA_Y;
- short ft5402_RESOLUTION_X;
- short ft5402_RESOLUTION_Y;
- unsigned char ft5402_DIRECTION;
- unsigned char ft5402_FACE_DETECT_PRE_VALUE;
- unsigned char ft5402_FACE_DETECT_NUM;
-
- unsigned char ft5402_BIGAREA_PEAK_VALUE_MIN;
- unsigned char ft5402_BIGAREA_DIFF_VALUE_OVER_NUM;
- unsigned char ft5402_CUSTOMER_ID;
- unsigned char ft5402_PERIOD_ACTIVE;
- unsigned char ft5402_FACE_DETECT_STATISTICS_TX_NUM;
-
- short ft5402_THGROUP;
- unsigned char ft5402_THPEAK;
- unsigned char ft5402_FACE_DETECT_MODE;
- short ft5402_MAX_TOUCH_VALUE;
-
- unsigned char ft5402_PWMODE_CTRL;
- unsigned char ft5402_DRAW_LINE_TH;
- unsigned char ft5402_POINTS_SUPPORTED;
-
- unsigned char ft5402_START_RX;
- short ft5402_ADC_TARGET;
- unsigned char ft5402_ESD_FILTER_FRAME;
-
- unsigned char ft5402_POINTS_STABLE_MACRO;
- unsigned char ft5402_MIN_DELTA_X;
- unsigned char ft5402_MIN_DELTA_Y;
- unsigned char ft5402_MIN_DELTA_STEP;
-
- unsigned char ft5402_ESD_NOISE_MACRO;
- unsigned char ft5402_ESD_DIFF_VAL;
- char ft5402_ESD_NEGTIVE; //negtive
- unsigned char ft5402_ESD_FILTER_FRAMES;
-
- unsigned char ft5402_IO_LEVEL_SELECT;
-
- unsigned char ft5402_POINTID_DELAY_COUNT;
-
- unsigned char ft5402_LIFTUP_FILTER_MACRO;
-
- unsigned char ft5402_DIFF_HANDLE_MACRO;
- char ft5402_MIN_WATER; //negtive
- unsigned char ft5402_MAX_NOISE;
- unsigned char ft5402_WATER_START_RX;
- unsigned char ft5402_WATER_START_TX;
-
- unsigned char ft5402_HOST_NUMBER_SUPPORTED_MACRO;
- unsigned char ft5402_RAISE_THGROUP;
- unsigned char ft5402_CHARGER_STATE;
-
- unsigned char ft5402_FILTERID_START;
-
- unsigned char ft5402_FRAME_FILTER_EN_MACRO;
- unsigned char ft5402_FRAME_FILTER_SUB_MAX_TH;
- unsigned char ft5402_FRAME_FILTER_ADD_MAX_TH;
- unsigned char ft5402_FRAME_FILTER_SKIP_START_FRAME;
- unsigned char ft5402_FRAME_FILTER_BAND_EN;
- unsigned char ft5402_FRAME_FILTER_BAND_WIDTH;
-
-};
-
-struct Struct_Param_FT5402 g_param_ft5402 = {
- FT5402_KX,
- FT5402_KY,
- FT5402_LEMDA_X,
- FT5402_LEMDA_Y,
- FT5402_RESOLUTION_X,
- FT5402_RESOLUTION_Y,
- FT5402_DIRECTION,
-
- FT5402_FACE_DETECT_PRE_VALUE,
- FT5402_FACE_DETECT_NUM,
- FT5402_BIGAREA_PEAK_VALUE_MIN,
- FT5402_BIGAREA_DIFF_VALUE_OVER_NUM,
- FT5402_CUSTOMER_ID,
- FT5402_RV_G_PERIOD_ACTIVE,
- FT5402_FACE_DETECT_STATISTICS_TX_NUM,
-
- FT5402_THGROUP,
- FT5402_THPEAK,
- FT5402_FACE_DETECT_MODE,
- FT5402_MAX_TOUCH_VALUE,
-
- FT5402_PWMODE_CTRL,
- FT5402_DRAW_LINE_TH,
- FT5402_POINTS_SUPPORTED,
-
- FT5402_START_RX,
- FT5402_ADC_TARGET,
- FT5402_ESD_FILTER_FRAME,
-
- FT5402_POINTS_STABLE_MACRO,
- FT5402_MIN_DELTA_X,
- FT5402_MIN_DELTA_Y,
- FT5402_MIN_DELTA_STEP,
-
- FT5402_ESD_NOISE_MACRO,
- FT5402_ESD_DIFF_VAL,
- FT5402_ESD_NEGTIVE,
- FT5402_ESD_FILTER_FRAME,
-
- FT5402_IO_LEVEL_SELECT,
-
- FT5402_POINTID_DELAY_COUNT,
-
- FT5402_LIFTUP_FILTER_MACRO,
-
- FT5402_DIFFDATA_HANDLE,
- FT5402_MIN_WATER_VAL,
- FT5402_MAX_NOISE_VAL,
- FT5402_WATER_HANDLE_START_RX,
- FT5402_WATER_HANDLE_START_TX,
-
- FT5402_HOST_NUMBER_SUPPORTED,
- FT5402_RV_G_RAISE_THGROUP,
- FT5402_RV_G_CHARGER_STATE,
-
- FT5402_RV_G_FILTERID_START,
-
- FT5402_FRAME_FILTER_EN,
- FT5402_FRAME_FILTER_SUB_MAX_TH,
- FT5402_FRAME_FILTER_ADD_MAX_TH,
- FT5402_FRAME_FILTER_SKIP_START_FRAME,
- FT5402_FRAME_FILTER_BAND_EN,
- FT5402_FRAME_FILTER_BAND_WIDTH,
-};
-
-char String_Param_FT5402[][64] = {
- STRING_FT5402_KX,
- STRING_FT5402_KY,
- STRING_FT5402_LEMDA_X,
- STRING_FT5402_LEMDA_Y,
- STRING_FT5402_RESOLUTION_X,
- STRING_FT5402_RESOLUTION_Y,
- STRING_FT5402_DIRECTION,
- STRING_FT5402_FACE_DETECT_PRE_VALUE,
- STRING_FT5402_FACE_DETECT_NUM,
- STRING_FT5402_BIGAREA_PEAK_VALUE_MIN,
- STRING_FT5402_BIGAREA_DIFF_VALUE_OVER_NUM,
- STRING_FT5402_CUSTOMER_ID,
- STRING_FT5402_PERIOD_ACTIVE,
- STRING_FT5402_FACE_DETECT_STATISTICS_TX_NUM,
-
- STRING_FT5402_THGROUP,
- STRING_FT5402_THPEAK,
- STRING_FT5402_FACE_DETECT_MODE,
- STRING_FT5402_MAX_TOUCH_VALUE,
-
- STRING_FT5402_PWMODE_CTRL,
- STRING_FT5402_DRAW_LINE_TH,
- STRING_FT5402_POINTS_SUPPORTED,
-
- STRING_FT5402_START_RX,
- STRING_FT5402_ADC_TARGET,
- STRING_FT5402_ESD_FILTER_FRAME,
-
-
- STRING_ft5402_tx_num,
- STRING_ft5402_rx_num,
- STRING_ft5402_gain,
- STRING_ft5402_voltage ,
- STRING_ft5402_scanselect,
-
- STRING_ft5402_tx_order,
- STRING_ft5402_tx_offset,
- STRING_ft5402_tx_cap,
-
- STRING_ft5402_rx_order,
- STRING_ft5402_rx_offset,
- STRING_ft5402_rx_cap,
-
- STRING_FT5402_POINTS_STABLE_MACRO,
- STRING_FT5402_MIN_DELTA_X,
- STRING_FT5402_MIN_DELTA_Y,
- STRING_FT5402_MIN_DELTA_STEP,
-
- STRING_FT5402_ESD_NOISE_MACRO,
- STRING_FT5402_ESD_DIFF_VAL,
- STRING_FT5402_ESD_NEGTIVE,
- STRING_FT5402_ESD_FILTER_FRAME,
-
- STRING_FT5402_IO_LEVEL_SELECT,
-
- STRING_FT5402_POINTID_DELAY_COUNT,
-
- STRING_FT5402_LIFTUP_FILTER_MACRO,
-
- STRING_FT5402_DIFFDATA_HANDLE,
- STRING_FT5402_MIN_WATER_VAL,
- STRING_FT5402_MAX_NOISE_VAL,
- STRING_FT5402_WATER_HANDLE_START_RX,
- STRING_FT5402_WATER_HANDLE_START_TX,
-
- STRING_FT5402_HOST_NUMBER_SUPPORTED,
- STRING_FT5402_RV_G_RAISE_THGROUP,
- STRING_FT5402_RV_G_CHARGER_STATE,
-
- STRING_FT5402_RV_G_FILTERID_START,
-
- STRING_FT5402_FRAME_FILTER_EN,
- STRING_FT5402_FRAME_FILTER_SUB_MAX_TH,
- STRING_FT5402_FRAME_FILTER_ADD_MAX_TH,
- STRING_FT5402_FRAME_FILTER_SKIP_START_FRAME,
- STRING_FT5402_FRAME_FILTER_BAND_EN,
- STRING_FT5402_FRAME_FILTER_BAND_WIDTH,
-
-};
-
-#define FT5402_APP_NAME "FT5X02_param"
-
-#define FT5402_APP_LEGAL "Legal_File"
-#define FT5402_APP_LEGAL_BYTE_1_STR "BYTE_1"
-#define FT5402_APP_LEGAL_BYTE_2_STR "BYTE_2"
-
-#define FT5402_APP_LEGAL_BYTE_1_VALUE 107
-#define FT5402_APP_LEGAL_BYTE_2_VALUE 201
-
-
-#define FT5402_INI_FILEPATH "/system/etc/firmware/"
-
-#endif
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x.c b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x.c deleted file mode 100755 index 9bb63b83..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x.c +++ /dev/null @@ -1,937 +0,0 @@ -/* - * drivers/input/touchscreen/ft5x0x/ft5x0x.c - * - * FocalTech ft5x0x TouchScreen driver. - * - * Copyright (c) 2010 Focal tech Ltd. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * note: only support mulititouch Wenfs 2010-10-01 - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/input.h> -#ifdef CONFIG_HAS_EARLYSUSPEND -#include <linux/earlysuspend.h> -#endif -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <mach/hardware.h> -#include <linux/platform_device.h> -#include <linux/suspend.h> -#include <linux/wait.h> -#include <asm/uaccess.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/wmt_iomux.h> -#include <linux/slab.h> -#include "ft5x0x.h" -#include "../../../video/backlight/wmt_bl.h" - -struct ft5x0x_data *pContext=NULL; -static struct i2c_client *l_client=NULL; - -#ifdef TOUCH_KEY -static int keycodes[NUM_KEYS] ={ - KEY_MENU, - KEY_HOME, - KEY_BACK, - KEY_SEARCH -}; -#endif - -#define FT5402_CONFIG_NAME "fttpconfig_5402public.ini" -extern int ft5x0x_read_fw_ver(void); -extern int ft5x0x_auto_clb(void); -extern int ft5x0x_upg_fw_bin(struct ft5x0x_data *ft5x0x, int check_ver); -extern int ft5402_Get_Param_From_Ini(char *config_name); -extern int ft5402_Init_IC_Param(struct i2c_client *client); -extern int ft5402_get_ic_param(struct i2c_client *client); -extern int ft5402_read_reg(struct i2c_client * client, u8 regaddr, u8 * regvalue); - -extern int register_bl_notifier(struct notifier_block *nb); - -extern int unregister_bl_notifier(struct notifier_block *nb); - - -int ft5x0x_i2c_rxdata(char *rxdata, int length) -{ - int ret; - struct i2c_msg msg[2]; - - msg[0].addr = pContext->addr; - msg[0].flags = 0 | I2C_M_NOSTART; - msg[0].len = 1; - msg[0].buf = rxdata; - - msg[1].addr = pContext->addr; - msg[1].flags = I2C_M_RD; - msg[1].len = length; - msg[1].buf = rxdata; - - ret = i2c_transfer(pContext->client->adapter, msg, 2); - if (ret <= 0) - dbg_err("msg i2c read error: %d\n", ret); - - return ret; -} - - -int ft5x0x_i2c_txdata(char *txdata, int length) -{ - int ret; - struct i2c_msg msg[1]; - - msg[0].addr = pContext->addr; - msg[0].flags = 0; - msg[0].len = length; - msg[0].buf = txdata; - - ret = i2c_transfer(pContext->client->adapter, msg, 1); - if (ret <= 0) - dbg_err("msg i2c read error: %d\n", ret); - - return ret; -} - -static void ft5x0x_penup(struct ft5x0x_data *ft5x0x) -{ - input_mt_sync(ft5x0x->input_dev); - input_sync(ft5x0x->input_dev); -#ifdef TOUCH_KEY - if(ft5x0x->tskey_used && ft5x0x->tkey_pressed && ft5x0x->tkey_idx < NUM_KEYS ){ - input_report_key(ft5x0x->input_dev, keycodes[ft5x0x->tkey_idx], 1); - input_sync(ft5x0x->input_dev); - input_report_key(ft5x0x->input_dev, keycodes[ft5x0x->tkey_idx], 0); - input_sync(ft5x0x->input_dev); - dbg("report as key event %d \n",ft5x0x->tkey_idx); - } -#endif - - dbg("pen up\n"); - return; -} - -#ifdef TOUCH_KEY -static int ft5x0x_read_tskey(struct ft5x0x_data *ft5x0x,int x,int y) -{ - int px,py; - - if(ft5x0x->tkey.axis){ - px = y; - py = x; - }else{ - px = x; - py = y; - } - - if(px >= ft5x0x->tkey.x_lower && px<=ft5x0x->tkey.x_upper){ - ft5x0x->tkey_pressed = 1; - if(py>= ft5x0x->tkey.ypos[0].y_lower && py<= ft5x0x->tkey.ypos[0].y_upper){ - ft5x0x->tkey_idx= 0; - }else if(py>= ft5x0x->tkey.ypos[1].y_lower && py<= ft5x0x->tkey.ypos[1].y_upper){ - ft5x0x->tkey_idx = 1; - }else if(py>= ft5x0x->tkey.ypos[2].y_lower && py<= ft5x0x->tkey.ypos[2].y_upper){ - ft5x0x->tkey_idx = 2; - }else if(py>= ft5x0x->tkey.ypos[3].y_lower && py<= ft5x0x->tkey.ypos[3].y_upper){ - ft5x0x->tkey_idx = 3; - }else{ - ft5x0x->tkey_idx = NUM_KEYS; - } - - return 1; - } - - ft5x0x->tkey_pressed = 0; - return 0; -} -#endif - -static int ft5x0x_read_data(struct ft5x0x_data *ft5x0x) -{ - int ret = -1; - int i = 0; - u16 x,y,px,py; - u8 buf[64] = {0}, id; - struct ts_event *event = &ft5x0x->event; - - if(ft5x0x->nt == 10) - ret = ft5x0x_i2c_rxdata(buf, 64); - else if(ft5x0x->nt == 5) - ret = ft5x0x_i2c_rxdata(buf, 31); - - if (ret <= 0) { - dbg_err("read_data i2c_rxdata failed: %d\n", ret); - return ret; - } - - memset(event, 0, sizeof(struct ts_event)); - //event->tpoint = buf[2] & 0x03;// 0000 0011 - //event->tpoint = buf[2] & 0x07;// 000 0111 - event->tpoint = buf[2]&0x0F; - if (event->tpoint == 0) { - ft5x0x_penup(ft5x0x); - return 1; - } - - if (event->tpoint > ft5x0x->nt){ - dbg_err("tounch pointnum=%d > max:%d\n", event->tpoint,ft5x0x->nt); - return -1; - } - - for (i = 0; i < event->tpoint; i++){ - id = (buf[5+i*6] >>4) & 0x0F;//get track id - if(ft5x0x->swap){ - px = (buf[3+i*6] & 0x0F)<<8 |buf[4+i*6]; - py = (buf[5+i*6] & 0x0F)<<8 |buf[6+i*6]; - }else{ - px = (buf[5+i*6] & 0x0F)<<8 |buf[6+i*6]; - py = (buf[3+i*6] & 0x0F)<<8 |buf[4+i*6]; - } - - x = px; - y = py; - - if(ft5x0x->xch) - x = ft5x0x->reslx - px; - - if(ft5x0x->ych) - y = ft5x0x->resly - py; - - if(ft5x0x->dbg) printk("F%d: Tid=%d,px=%d,py=%d; x=%d,y=%d\n", i, id, px, py, x, y); - -#ifdef TOUCH_KEY - if(ft5x0x->tskey_used && event->tpoint==1) { - if(ft5x0x_read_tskey(ft5x0x,px,py) > 0) return -1; - } -#endif - if (ft5x0x->lcd_exchg) { - int tmp; - tmp = x; - x = y; - y = ft5x0x->reslx - tmp; - } - event->x[i] = x; - event->y[i] = y; - event->tid[i] = id; - - } - - return 0; -} - -static void ft5x0x_report(struct ft5x0x_data *ft5x0x) -{ - int i = 0; - struct ts_event *event = &ft5x0x->event; - - for (i = 0; i < event->tpoint; i++){ - input_report_abs(ft5x0x->input_dev, ABS_MT_TRACKING_ID, event->tid[i]); - input_report_abs(ft5x0x->input_dev, ABS_MT_POSITION_X, event->x[i]); - input_report_abs(ft5x0x->input_dev, ABS_MT_POSITION_Y, event->y[i]); - input_mt_sync(ft5x0x->input_dev); - } - input_sync(ft5x0x->input_dev); - - return; -} - -static void ft5x0x_read_work(struct work_struct *work) -{ - int ret = -1; - struct ft5x0x_data *ft5x0x = container_of(work, struct ft5x0x_data, read_work); - - mutex_lock(&ft5x0x->ts_mutex); - ret = ft5x0x_read_data(ft5x0x); - - if (ret == 0) ft5x0x_report(ft5x0x); - - wmt_gpio_unmask_irq(ft5x0x->irqgpio); - mutex_unlock(&ft5x0x->ts_mutex); - - return; -} - -static irqreturn_t ft5x0x_interrupt(int irq, void *dev) -{ - struct ft5x0x_data *ft5x0x = dev; - - if (gpio_irqstatus(ft5x0x->irqgpio)) - { - wmt_gpio_ack_irq(ft5x0x->irqgpio); - if (is_gpio_irqenable(ft5x0x->irqgpio)) - { - wmt_gpio_mask_irq(ft5x0x->irqgpio); -#ifdef CONFIG_HAS_EARLYSUSPEND - if(!ft5x0x->earlysus) queue_work(ft5x0x->workqueue, &ft5x0x->read_work); -#else - queue_work(ft5x0x->workqueue, &ft5x0x->read_work); -#endif - - } - return IRQ_HANDLED; - } - return IRQ_NONE; -} - -static void ft5x0x_reset(struct ft5x0x_data *ft5x0x) -{ - gpio_set_value(ft5x0x->rstgpio, 1); - mdelay(5); - gpio_set_value(ft5x0x->rstgpio, 0); - mdelay(20); - gpio_set_value(ft5x0x->rstgpio, 1); - mdelay(5); - - return; -} - -#ifdef CONFIG_HAS_EARLYSUSPEND -static void ft5x0x_early_suspend(struct early_suspend *handler) -{ - struct ft5x0x_data *ft5x0x = container_of(handler, struct ft5x0x_data, early_suspend); - ft5x0x->earlysus = 1; - wmt_gpio_mask_irq(ft5x0x->irqgpio); - return; -} - -static void ft5x0x_late_resume(struct early_suspend *handler) -{ - struct ft5x0x_data *ft5x0x = container_of(handler, struct ft5x0x_data, early_suspend); - - ft5x0x_reset(ft5x0x); - ft5x0x->earlysus = 0; - - wmt_gpio_set_irq_type(ft5x0x->irqgpio, IRQ_TYPE_EDGE_FALLING); - wmt_gpio_unmask_irq(ft5x0x->irqgpio); - - return; -} -#endif //CONFIG_HAS_EARLYSUSPEND - -#ifdef CONFIG_PM -static int ft5x0x_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct ft5x0x_data *ft5x0x = dev_get_drvdata(&pdev->dev); - ft5x0x->earlysus = 1; - wmt_gpio_mask_irq(ft5x0x->irqgpio); - return 0; -} - -static int ft5x0x_resume(struct platform_device *pdev) -{ - struct ft5x0x_data *ft5x0x = dev_get_drvdata(&pdev->dev); - ft5x0x_reset(ft5x0x); - ft5x0x->earlysus = 0; - - if (ft5x0x->load_cfg) { - msleep(350); - ft5402_Init_IC_Param(ft5x0x->client); - //msleep(50); - ft5402_get_ic_param(ft5x0x->client); - } - wmt_gpio_set_irq_type(ft5x0x->irqgpio, IRQ_TYPE_EDGE_FALLING); - wmt_gpio_unmask_irq(ft5x0x->irqgpio); - return 0; -} - -#else -#define ft5x0x_suspend NULL -#define ft5x0x_resume NULL -#endif - -static ssize_t cat_dbg(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "dbg \n"); -} - -static ssize_t echo_dbg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned int dbg = simple_strtoul(buf, NULL, 10); - struct ft5x0x_data *ft5x0x = pContext; - - if(dbg){ - ft5x0x->dbg = 1; - }else{ - ft5x0x->dbg = 0; - } - - return count; -} -static DEVICE_ATTR(dbg, S_IRUGO | S_IWUSR, cat_dbg, echo_dbg); - -static ssize_t cat_clb(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "calibrate \n"); -} - -static ssize_t echo_clb(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned int cal = simple_strtoul(buf, NULL, 10); - - if(cal){ - if(ft5x0x_auto_clb()) printk("Calibrate Failed.\n"); - }else{ - printk("calibrate --echo 1 >clb.\n"); - } - - return count; -} - -static DEVICE_ATTR(clb, S_IRUGO | S_IWUSR, cat_clb, echo_clb); - -static ssize_t cat_fupg(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "fupg \n"); -} - -static ssize_t echo_fupg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct ft5x0x_data *ft5x0x = pContext; - unsigned int upg = simple_strtoul(buf, NULL, 10); - - wmt_gpio_mask_irq(ft5x0x->irqgpio); - if(upg){ - if(ft5x0x_upg_fw_bin(ft5x0x, 0)) printk("Upgrade Failed.\n"); - }else{ - printk("upgrade --echo 1 > fupg.\n"); - } - wmt_gpio_unmask_irq(ft5x0x->irqgpio); - - return count; -} -static DEVICE_ATTR(fupg, S_IRUGO | S_IWUSR, cat_fupg, echo_fupg); - - -static ssize_t cat_fver(struct device *dev, struct device_attribute *attr, char *buf) -{ - int fw_ver = ft5x0x_read_fw_ver(); - return sprintf(buf, "firmware version:0x%02x \n",fw_ver); -} - -static ssize_t echo_fver(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - return count; -} -static DEVICE_ATTR(fver, S_IRUGO | S_IWUSR, cat_fver, echo_fver); - -static ssize_t cat_addr(struct device *dev, struct device_attribute *attr, char *buf) -{ - int ret; - u8 addrs[32]; - int cnt=0; - struct i2c_msg msg[2]; - struct ft5x0x_data *ft5x0x = pContext; - u8 ver[1]= {0xa6}; - - ft5x0x->addr = 1; - - msg[0].addr = ft5x0x->addr; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = ver; - - msg[1].addr = ft5x0x->addr; - msg[1].flags = I2C_M_RD; - msg[1].len = 1; - msg[1].buf = ver; - - while(ft5x0x->addr < 0x80){ - ret = i2c_transfer(ft5x0x->client->adapter, msg, 2); - if(ret == 2) sprintf(&addrs[5*cnt++], " 0x%02x",ft5x0x->addr); - - ft5x0x->addr++; - msg[0].addr = msg[1].addr = ft5x0x->addr; - } - - return sprintf(buf, "i2c addr:%s\n",addrs); -} - -static ssize_t echo_addr(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned int addr; - struct ft5x0x_data *ft5x0x = pContext; - - sscanf(buf,"%x", &addr); - ft5x0x->addr = addr; - - return count; -} -static DEVICE_ATTR(addr, S_IRUGO | S_IWUSR, cat_addr, echo_addr); - -static struct attribute *ft5x0x_attributes[] = { - &dev_attr_clb.attr, - &dev_attr_fupg.attr, - &dev_attr_fver.attr, - &dev_attr_dbg.attr, - &dev_attr_addr.attr, - NULL -}; - -static const struct attribute_group ft5x0x_group = { - .attrs = ft5x0x_attributes, -}; - -static int ft5x0x_sysfs_create_group(struct ft5x0x_data *ft5x0x, const struct attribute_group *group) -{ - int err; - - ft5x0x->kobj = kobject_create_and_add("wmtts", NULL) ; - if(!ft5x0x->kobj){ - dbg_err("kobj create failed.\n"); - return -ENOMEM; - } - - /* Register sysfs hooks */ - err = sysfs_create_group(ft5x0x->kobj, group); - if (err < 0){ - kobject_del(ft5x0x->kobj); - dbg_err("Create sysfs group failed!\n"); - return -ENOMEM; - } - - return 0; -} - -static void ft5x0x_sysfs_remove_group(struct ft5x0x_data *ft5x0x, const struct attribute_group *group) -{ - sysfs_remove_group(ft5x0x->kobj, group); - kobject_del(ft5x0x->kobj); - return; -} - -static int bl_notify_irqgpio = -1; -static int wmt_wakeup_bl_notify(struct notifier_block *nb, unsigned long event, - void *dummy) -{ - switch (event) { - case BL_CLOSE: - errlog("ft5x0x: BL_CLOSE, disable irq\n"); - wmt_gpio_mask_irq(bl_notify_irqgpio); - break; - case BL_OPEN: - errlog("ft5x0x: BL_OPEN, enable irq\n"); - wmt_gpio_unmask_irq(bl_notify_irqgpio); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block wmt_bl_notify = { - .notifier_call = wmt_wakeup_bl_notify, -}; - -static int ft5x0x_probe(struct platform_device *pdev) -{ - int i,err = 0; - u8 value = 0; - u8 cfg_name[32]; - struct ft5x0x_data *ft5x0x = platform_get_drvdata( pdev); - - ft5x0x->client = l_client; - INIT_WORK(&ft5x0x->read_work, ft5x0x_read_work); - mutex_init(&ft5x0x->ts_mutex); - - ft5x0x->workqueue = create_singlethread_workqueue(ft5x0x->name); - if (!ft5x0x->workqueue) { - err = -ESRCH; - goto exit_create_singlethread; - } - - err = ft5x0x_sysfs_create_group(ft5x0x, &ft5x0x_group); - if(err < 0){ - dbg("create sysfs group failed.\n"); - goto exit_create_group; - } - - ft5x0x->input_dev = input_allocate_device(); - if (!ft5x0x->input_dev) { - err = -ENOMEM; - dbg("failed to allocate input device\n"); - goto exit_input_dev_alloc_failed; - } - - ft5x0x->input_dev->name = ft5x0x->name; - ft5x0x->input_dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); - set_bit(INPUT_PROP_DIRECT, ft5x0x->input_dev->propbit); - - if (ft5x0x->lcd_exchg) { - input_set_abs_params(ft5x0x->input_dev, - ABS_MT_POSITION_X, 0, ft5x0x->resly, 0, 0); - input_set_abs_params(ft5x0x->input_dev, - ABS_MT_POSITION_Y, 0, ft5x0x->reslx, 0, 0); - } else { - input_set_abs_params(ft5x0x->input_dev, - ABS_MT_POSITION_X, 0, ft5x0x->reslx, 0, 0); - input_set_abs_params(ft5x0x->input_dev, - ABS_MT_POSITION_Y, 0, ft5x0x->resly, 0, 0); - } - input_set_abs_params(ft5x0x->input_dev, - ABS_MT_TRACKING_ID, 0, 20, 0, 0); -#ifdef TOUCH_KEY - if(ft5x0x->tskey_used){ - for (i = 0; i <NUM_KEYS; i++) - set_bit(keycodes[i], ft5x0x->input_dev->keybit); - - ft5x0x->input_dev->keycode = keycodes; - ft5x0x->input_dev->keycodesize = sizeof(unsigned int); - ft5x0x->input_dev->keycodemax = NUM_KEYS; - } -#endif - - err = input_register_device(ft5x0x->input_dev); - if (err) { - dbg_err("ft5x0x_ts_probe: failed to register input device.\n"); - goto exit_input_register_device_failed; - } - -#ifdef CONFIG_HAS_EARLYSUSPEND - ft5x0x->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1; - ft5x0x->early_suspend.suspend = ft5x0x_early_suspend; - ft5x0x->early_suspend.resume = ft5x0x_late_resume; - register_early_suspend(&ft5x0x->early_suspend); -#endif - - if(ft5x0x->upg){ - if(ft5x0x_upg_fw_bin(ft5x0x, 1)) printk("Upgrade Failed.\n"); - else wmt_setsyspara("wmt.io.ts.upg",""); - ft5x0x->upg = 0x00; - } - - if(request_irq(ft5x0x->irq, ft5x0x_interrupt, IRQF_SHARED, ft5x0x->name, ft5x0x) < 0){ - dbg_err("Could not allocate irq for ts_ft5x0x !\n"); - err = -1; - goto exit_register_irq; - } - - { // check if need to load config to IC or not - err = ft5402_read_reg(ft5x0x->client, 0xa3, &value); - if (err < 0) - dbg_err("Read reg 0xa3 failed.\n"); - else - printk("0xa3 reg = %d\n", value); - if (value == 3) - ft5x0x->load_cfg = 1; - else - ft5x0x->load_cfg = 0; - } - ft5x0x_reset(ft5x0x); - - if (ft5x0x->load_cfg) { - msleep(350); /*make sure CTP already finish startup process*/ - sprintf(cfg_name, "%s.ini", ft5x0x->cfg_name); - printk("Config file name: %s\n", cfg_name); - if (ft5402_Get_Param_From_Ini(cfg_name) >= 0) - ft5402_Init_IC_Param(ft5x0x->client); - else - dbg_err("[FTS]-------Get ft5402 param from INI file failed\n"); - ft5402_get_ic_param(ft5x0x->client); - } - - wmt_gpio_set_irq_type(ft5x0x->irqgpio, IRQ_TYPE_EDGE_FALLING); - wmt_gpio_unmask_irq(ft5x0x->irqgpio); - - if(bl_notify_irqgpio < 0){ - register_bl_notifier(&wmt_bl_notify); - bl_notify_irqgpio = ft5x0x->irqgpio; - } - - return 0; - -exit_register_irq: -#ifdef CONFIG_HAS_EARLYSUSPEND - unregister_early_suspend(&ft5x0x->early_suspend); -#endif -exit_input_register_device_failed: - input_free_device(ft5x0x->input_dev); -exit_input_dev_alloc_failed: - ft5x0x_sysfs_remove_group(ft5x0x, &ft5x0x_group); -exit_create_group: - cancel_work_sync(&ft5x0x->read_work); - destroy_workqueue(ft5x0x->workqueue); -exit_create_singlethread: - return err; -} - -static int ft5x0x_remove(struct platform_device *pdev) -{ - struct ft5x0x_data *ft5x0x = platform_get_drvdata( pdev); - - if( bl_notify_irqgpio > 0){ - unregister_bl_notifier(&wmt_bl_notify); - bl_notify_irqgpio = -1; - } - cancel_work_sync(&ft5x0x->read_work); - flush_workqueue(ft5x0x->workqueue); - destroy_workqueue(ft5x0x->workqueue); - - free_irq(ft5x0x->irq, ft5x0x); - wmt_gpio_mask_irq(ft5x0x->irqgpio); - -#ifdef CONFIG_HAS_EARLYSUSPEND - unregister_early_suspend(&ft5x0x->early_suspend); -#endif - input_unregister_device(ft5x0x->input_dev); - - ft5x0x_sysfs_remove_group(ft5x0x, &ft5x0x_group); - - mutex_destroy(&ft5x0x->ts_mutex); - dbg("remove...\n"); - return 0; -} - -static void ft5x0x_release(struct device *device) -{ - return; -} - -static struct platform_device ft5x0x_device = { - .name = DEV_FT5X0X, - .id = 0, - .dev = {.release = ft5x0x_release}, -}; - -static struct platform_driver ft5x0x_driver = { - .driver = { - .name = DEV_FT5X0X, - .owner = THIS_MODULE, - }, - .probe = ft5x0x_probe, - .remove = ft5x0x_remove, - .suspend = ft5x0x_suspend, - .resume = ft5x0x_resume, -}; - -static int check_touch_env(struct ft5x0x_data *ft5x0x) -{ - int i,ret = 0; - int len = 96; - int Enable; - char retval[96] = {0}; - char *p=NULL; - char *s=NULL; - - // Get u-boot parameter - ret = wmt_getsyspara("wmt.io.touch", retval, &len); - if(ret){ - //printk("MST FT5x0x:Read wmt.io.touch Failed.\n"); - return -EIO; - } - sscanf(retval,"%d:",&Enable); - //check touch enable - if(Enable == 0){ - //printk("FT5x0x Touch Screen Is Disabled.\n"); - return -ENODEV; - } - - p = strchr(retval,':'); - p++; - if(strncmp(p,"ft5301",6)==0){//check touch ID - ft5x0x->id = FT5301; - ft5x0x->name = DEV_FT5301; - }else if(strncmp(p,"ft5406",6)==0){ - ft5x0x->id = FT5406; - ft5x0x->name = DEV_FT5406; - }else if(strncmp(p,"ft5206",6)==0){ - ft5x0x->id = FT5206; - ft5x0x->name = DEV_FT5206; - }else if(strncmp(p,"ft5606",6)==0){ - ft5x0x->id = FT5606; - ft5x0x->name = DEV_FT5606; - }else if(strncmp(p,"ft5306",6)==0){ - ft5x0x->id = FT5306; - ft5x0x->name = DEV_FT5306; - }else if(strncmp(p,"ft5302",6)==0){ - ft5x0x->id = FT5302; - ft5x0x->name = DEV_FT5302; - }else if(strncmp(p,"ft5",3)==0) - { - ft5x0x->id = FT5X0X; - ft5x0x->name = DEV_FT5X0X; - }else{ - printk("FT5x0x touch disabled.\n"); - return -ENODEV; - } - - s = strchr(p,':'); - strncpy(ft5x0x->cfg_name, p, s-p); - - p = s + 1; - sscanf(p,"%d:%d:%d:%d:%d:%d:%d:%d:%x", &ft5x0x->irqgpio, &ft5x0x->reslx, &ft5x0x->resly, &ft5x0x->rstgpio, &ft5x0x->swap, &ft5x0x->xch, &ft5x0x->ych, &ft5x0x->nt, &ft5x0x->addr); - - ft5x0x->irq = IRQ_GPIO; - printk("%s irqgpio=%d, reslx=%d, resly=%d, rstgpio=%d, swap=%d, xch=%d, ych=%d, nt=%d, addr=%x\n", ft5x0x->name, ft5x0x->irqgpio, ft5x0x->reslx, ft5x0x->resly, ft5x0x->rstgpio, ft5x0x->swap, ft5x0x->xch, ft5x0x->ych, ft5x0x->nt, ft5x0x->addr); - - memset(retval,0x00,sizeof(retval)); - ret = wmt_getsyspara("wmt.io.ts.upg", retval, &len); - if(!ret){ - ft5x0x->upg = 1; - strncpy(ft5x0x->fw_name, retval, sizeof(ft5x0x->fw_name)); - } - -#ifdef TOUCH_KEY - memset(retval,0x00,sizeof(retval)); - ret = wmt_getsyspara("wmt.io.tskey", retval, &len); - if(!ret){ - sscanf(retval,"%d:", &ft5x0x->nkeys); - p = strchr(retval,':'); - p++; - for(i=0; i < ft5x0x->nkeys; i++ ){ - sscanf(p,"%d:%d", &ft5x0x->tkey.ypos[i].y_lower, &ft5x0x->tkey.ypos[i].y_upper); - p = strchr(p,':'); - p++; - p = strchr(p,':'); - p++; - } - sscanf(p,"%d:%d:%d", &ft5x0x->tkey.axis, &ft5x0x->tkey.x_lower, &ft5x0x->tkey.x_upper); - ft5x0x->tskey_used = 1; - } -#endif - - memset(retval,0x00,sizeof(retval)); - ret = wmt_getsyspara("wmt.display.fb0", retval, &len); - if (!ret) { - int tmp[6]; - p = retval; - sscanf(p, "%d:[%d:%d:%d:%d:%d", &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]); - if (tmp[4] > tmp[5]) - ft5x0x->lcd_exchg = 1; - } - - return 0; -} - -struct i2c_board_info ts_i2c_board_info = { - .type = TS_I2C_NAME, - .flags = 0x00, - .addr = FT5406_I2C_ADDR, - .platform_data = NULL, - .archdata = NULL, - .irq = -1, -}; - -static int ts_i2c_register_device (void) -{ - struct i2c_board_info *ts_i2c_bi; - struct i2c_adapter *adapter = NULL; - //struct i2c_client *client = NULL; - - //ts_i2c_board_info.addr = FT5406_I2C_ADDR; - ts_i2c_bi = &ts_i2c_board_info; - adapter = i2c_get_adapter(FT5X0X_I2C_BUS);/*in bus 1*/ - - if (NULL == adapter) { - printk("can not get i2c adapter, client address error\n"); - return -1; - } - l_client = i2c_new_device(adapter, ts_i2c_bi); - if (l_client == NULL) { - printk("allocate i2c client failed\n"); - return -1; - } - i2c_put_adapter(adapter); - return 0; -} - -static void ts_i2c_unregister_device(void) -{ - if (l_client != NULL) - { - i2c_unregister_device(l_client); - l_client = NULL; - } -} - -static int __init ft5x0x_init(void) -{ - int ret = -ENOMEM; - struct ft5x0x_data *ft5x0x=NULL; - - if (ts_i2c_register_device()<0) - { - dbg("Error to run ts_i2c_register_device()!\n"); - return -1; - } - - ft5x0x = kzalloc(sizeof(struct ft5x0x_data), GFP_KERNEL); - if(!ft5x0x){ - dbg_err("mem alloc failed.\n"); - return -ENOMEM; - } - - pContext = ft5x0x; - ret = check_touch_env(ft5x0x); - if(ret < 0) - goto exit_free_mem; - - ret = gpio_request(ft5x0x->irqgpio, "ts_irq"); - if (ret < 0) { - printk("gpio(%d) touchscreen irq request fail\n", ft5x0x->irqgpio); - goto exit_free_mem; - } - wmt_gpio_setpull(ft5x0x->irqgpio, WMT_GPIO_PULL_UP); - gpio_direction_input(ft5x0x->irqgpio); - - ret = gpio_request(ft5x0x->rstgpio, "ts_rst"); - if (ret < 0) { - printk("gpio(%d) touchscreen reset request fail\n", ft5x0x->rstgpio); - goto exit_free_irqgpio; - } - gpio_direction_output(ft5x0x->rstgpio, 1); - - - ret = platform_device_register(&ft5x0x_device); - if(ret){ - dbg_err("register platform drivver failed!\n"); - goto exit_free_gpio; - } - platform_set_drvdata(&ft5x0x_device, ft5x0x); - - ret = platform_driver_register(&ft5x0x_driver); - if(ret){ - dbg_err("register platform device failed!\n"); - goto exit_unregister_pdev; - } - - return ret; - -exit_unregister_pdev: - platform_device_unregister(&ft5x0x_device); -exit_free_gpio: - gpio_free(ft5x0x->rstgpio); -exit_free_irqgpio: - gpio_free(ft5x0x->irqgpio); -exit_free_mem: - kfree(ft5x0x); - pContext = NULL; - return ret; -} - -static void ft5x0x_exit(void) -{ - if(!pContext) return; - - gpio_free(pContext->rstgpio); - gpio_free(pContext->irqgpio); - platform_driver_unregister(&ft5x0x_driver); - platform_device_unregister(&ft5x0x_device); - kfree(pContext); - ts_i2c_unregister_device(); - return; -} - -late_initcall(ft5x0x_init); -module_exit(ft5x0x_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("FocalTech.Touch"); diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x.h b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x.h deleted file mode 100755 index 03836b49..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x.h +++ /dev/null @@ -1,207 +0,0 @@ -#ifndef __LINUX_FT5X0X_TS_H__ -#define __LINUX_FT5X0X_TS_H__ - -#define DEV_FT5206 "touch_ft5206" -#define DEV_FT5301 "touch_ft5301" -#define DEV_FT5302 "touch_ft5302" -#define DEV_FT5306 "touch_ft5306" -#define DEV_FT5406 "touch_ft5406" -#define DEV_FT5606 "touch_ft5606" - -#define DEV_FT5X0X "touch_ft5x0x" -#define TS_I2C_NAME "ft5x0x-ts" -#define FT5406_I2C_ADDR 0x38 -#define FT5X0X_I2C_BUS 0x01 - -enum FT5X0X_ID{ - FT5206 =1, - FT5301, - FT5302, - FT5306, - FT5406, - FT5606, - FT5X0X, -}; - -struct vt1603_ts_cal_info { - int a1; - int b1; - int c1; - int a2; - int b2; - int c2; - int delta; -}; - -#define SUPPORT_POINT_NUM 10 -struct ts_event { - int x[SUPPORT_POINT_NUM]; - int y[SUPPORT_POINT_NUM]; - int tid[SUPPORT_POINT_NUM]; - int tpoint; -}; - -#define TOUCH_KEY - -#ifdef TOUCH_KEY -#define NUM_KEYS 4 -struct key_pos{ - int y_lower; - int y_upper; -}; - -struct ts_key{ - int axis; - int x_lower; - int x_upper; - struct key_pos ypos[NUM_KEYS]; -}; -#endif - -struct ft5x0x_data { - int id; - unsigned int addr; - const char *name; - u8 fw_name[64]; - u8 cfg_name[32]; - - struct i2c_client *client; - struct input_dev *input_dev; - struct ts_event event; - struct work_struct read_work; - struct workqueue_struct *workqueue; - struct mutex ts_mutex; - struct kobject *kobj; - #ifdef CONFIG_HAS_EARLYSUSPEND - struct early_suspend early_suspend; -#endif - int earlysus; - - int reslx; - int resly; - - int tw; - int th; - - int irq; - int irqgpio; - int rstgpio; -/* - int igp_idx; - int igp_bit; - - int rgp_idx; - int rgp_bit; -*/ - - int nt; - int nb; - int xch; - int ych; - int swap; - int lcd_exchg; - - int upg; - int load_cfg; - int dbg; -#ifdef TOUCH_KEY - int tskey_used; - int tkey_pressed; - int nkeys; - int tkey_idx; - struct ts_key tkey; -#endif - -}; - -enum ft5x0x_ts_regs { - FT5X0X_REG_THGROUP = 0x80, /* touch threshold, related to sensitivity */ - FT5X0X_REG_THPEAK = 0x81, - FT5X0X_REG_THCAL = 0x82, - FT5X0X_REG_THWATER = 0x83, - FT5X0X_REG_THTEMP = 0x84, - FT5X0X_REG_THDIFF = 0x85, - FT5X0X_REG_CTRL = 0x86, - FT5X0X_REG_TIMEENTERMONITOR = 0x87, - FT5X0X_REG_PERIODACTIVE = 0x88, /* report rate */ - FT5X0X_REG_PERIODMONITOR = 0x89, - FT5X0X_REG_HEIGHT_B = 0x8a, - FT5X0X_REG_MAX_FRAME = 0x8b, - FT5X0X_REG_DIST_MOVE = 0x8c, - FT5X0X_REG_DIST_POINT = 0x8d, - FT5X0X_REG_FEG_FRAME = 0x8e, - FT5X0X_REG_SINGLE_CLICK_OFFSET = 0x8f, - FT5X0X_REG_DOUBLE_CLICK_TIME_MIN = 0x90, - FT5X0X_REG_SINGLE_CLICK_TIME = 0x91, - FT5X0X_REG_LEFT_RIGHT_OFFSET = 0x92, - FT5X0X_REG_UP_DOWN_OFFSET = 0x93, - FT5X0X_REG_DISTANCE_LEFT_RIGHT = 0x94, - FT5X0X_REG_DISTANCE_UP_DOWN = 0x95, - FT5X0X_REG_ZOOM_DIS_SQR = 0x96, - FT5X0X_REG_RADIAN_VALUE =0x97, - FT5X0X_REG_MAX_X_HIGH = 0x98, - FT5X0X_REG_MAX_X_LOW = 0x99, - FT5X0X_REG_MAX_Y_HIGH = 0x9a, - FT5X0X_REG_MAX_Y_LOW = 0x9b, - FT5X0X_REG_K_X_HIGH = 0x9c, - FT5X0X_REG_K_X_LOW = 0x9d, - FT5X0X_REG_K_Y_HIGH = 0x9e, - FT5X0X_REG_K_Y_LOW = 0x9f, - FT5X0X_REG_AUTO_CLB_MODE = 0xa0, - FT5X0X_REG_LIB_VERSION_H = 0xa1, - FT5X0X_REG_LIB_VERSION_L = 0xa2, - FT5X0X_REG_CIPHER = 0xa3, - FT5X0X_REG_MODE = 0xa4, - FT5X0X_REG_PMODE = 0xa5, /* Power Consume Mode */ - FT5X0X_REG_FIRMID = 0xa6, /* Firmware version */ - FT5X0X_REG_STATE = 0xa7, - FT5X0X_REG_FT5201ID = 0xa8, - FT5X0X_REG_ERR = 0xa9, - FT5X0X_REG_CLB = 0xaa, -}; - -//FT5X0X_REG_PMODE -#define PMODE_ACTIVE 0x00 -#define PMODE_MONITOR 0x01 -#define PMODE_STANDBY 0x02 -#define PMODE_HIBERNATE 0x03 - -#define DEV_NAME "wmtts" -#define DEV_MAJOR 11 - -#define TS_IOC_MAGIC 't' -#define TS_IOCTL_CAL_START _IO(TS_IOC_MAGIC, 1) -#define TS_IOCTL_CAL_DONE _IOW(TS_IOC_MAGIC, 2, int*) -#define TS_IOCTL_GET_RAWDATA _IOR(TS_IOC_MAGIC, 3, int*) -#define TS_IOCTL_CAL_QUIT _IOW(TS_IOC_MAGIC, 4, int*) -#define TS_IOCTL_CAL_CAP _IOW(TS_IOC_MAGIC, 5, int*) -#define TS_IOC_MAXNR 5 - -extern int wmt_setsyspara(char *varname, unsigned char *varval); -extern int wmt_getsyspara(char *varname, unsigned char *varval, int *varlen); -extern int wmt_i2c_xfer_continue_if_4(struct i2c_msg *msg, unsigned int num,int bus_id); - -//#define FT_DEBUG - -#undef dbg -#ifdef FT_DEBUG - #define dbg(fmt,args...) printk("DBG:%s_%d:"fmt,__FUNCTION__,__LINE__,##args) -#else - #define dbg(fmt,args...) -#endif - -#undef dbg_err -#define dbg_err(fmt,args...) printk("ERR:%s_%d:"fmt,__FUNCTION__,__LINE__,##args) - -//#define FTS_DBG -#ifdef FTS_DBG -#define DBG(fmt, args...) printk("[FTS]" fmt, ## args) -#else -#define DBG(fmt, args...) do{}while(0) -#endif - -#ifndef errlog -#define errlog(fmt, args...) printk(KERN_ERR "[%s:%d]: " fmt, __FUNCTION__,__LINE__, ## args) -#endif - -#endif diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x_upg.c b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x_upg.c deleted file mode 100755 index 9db72130..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ft5x0x_upg.c +++ /dev/null @@ -1,506 +0,0 @@ -#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/mount.h>
-#ifdef CONFIG_HAS_EARLYSUSPEND -#include <linux/earlysuspend.h>
-#endif -#include <linux/syscalls.h>
-#include <asm/unistd.h>
-#include <asm/uaccess.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include "ft5x0x.h"
-
-typedef enum
-{
- ERR_OK,
- ERR_MODE,
- ERR_READID,
- ERR_ERASE,
- ERR_STATUS,
- ERR_ECC,
- ERR_DL_ERASE_FAIL,
- ERR_DL_PROGRAM_FAIL,
- ERR_DL_VERIFY_FAIL,
- ERR_FMID
-}E_UPGRADE_ERR_TYPE;
-
-#define FT5X_CTPM_ID_L 0X79
-#define FT5X_CTPM_ID_H 0X03
-
-#define FT56_CTPM_ID_L 0X79
-#define FT56_CTPM_ID_H 0X06
-
-#define FTS_PACKET_LENGTH 128
-
-extern struct ft5x0x_data *pContext;
-extern int ft5x0x_i2c_rxdata(char *rxdata, int length);
-extern int ft5x0x_i2c_txdata(char *txdata, int length);
-
-static int ft5x0x_write_reg(u8 addr, u8 para)
-{
- u8 buf[2];
- int ret = -1;
-
- buf[0] = addr;
- buf[1] = para;
- ret = ft5x0x_i2c_txdata(buf, 2);
- if (ret <= 0) {
- printk("write reg failed! %x ret: %d", buf[0], ret);
- return -1;
- }
-
- return 0;
-}
-
-static int ft5x0x_read_reg(u8 addr, u8 *pdata)
-{
- int ret;
- u8 buf[2];
- struct i2c_msg msgs[2];
-
- //
- buf[0] = addr; //register address
-
- msgs[0].addr = pContext->addr;
- msgs[0].flags = 0 | I2C_M_NOSTART;
- msgs[0].len = 1;
- msgs[0].buf = buf;
-
- msgs[1].addr = pContext->addr;
- msgs[1].flags = I2C_M_RD;
- msgs[1].len = 1;
- msgs[1].buf = pdata;
-
- //ret = wmt_i2c_xfer_continue_if_4(msgs, 2, FT5X0X_I2C_BUS);
- ret = i2c_transfer(pContext->client->adapter, msgs, 2); - if (ret <= 0)
- printk("msg %s i2c read error: %d\n", __func__, ret);
-
- return ret;
-
-}
-
-
-/*
-[function]:
- send a command to ctpm.
-[parameters]:
- btcmd[in] :command code;
- btPara1[in] :parameter 1;
- btPara2[in] :parameter 2;
- btPara3[in] :parameter 3;
- num[in] :the valid input parameter numbers, if only command code needed and no parameters followed,then the num is 1;
-[return]:
- FTS_TRUE :success;
- FTS_FALSE :io fail;
-*/
-static u8 cmd_write(u8 *cmd,u8 num)
-{
- return ft5x0x_i2c_txdata(cmd, num);
-}
-
-/*
-[function]:
- write data to ctpm , the destination address is 0.
-[parameters]:
- pbt_buf[in] :point to data buffer;
- bt_len[in] :the data numbers;
-[return]:
- FTS_TRUE :success;
- FTS_FALSE :io fail;
-*/
-static u8 byte_write(u8* pbt_buf, int dw_len)
-{
-
- return ft5x0x_i2c_txdata( pbt_buf, dw_len);
-}
-
-/*
-[function]:
- read out data from ctpm,the destination address is 0.
-[parameters]:
- pbt_buf[out] :point to data buffer;
- bt_len[in] :the data numbers;
-[return]:
- FTS_TRUE :success;
- FTS_FALSE :io fail;
-*/
-static u8 byte_read(u8* pbt_buf, u8 bt_len)
-{
- int ret;
- struct i2c_msg msg[1];
- - msg[0].addr = pContext->addr;
- msg[0].flags = I2C_M_RD;
- msg[0].len = bt_len;
- msg[0].buf = pbt_buf;
- - ret = i2c_transfer(pContext->client->adapter, msg, 1); - //ret = wmt_i2c_xfer_continue_if_4(msg, 1, FT5X0X_I2C_BUS);
- if (ret <= 0) - printk("msg i2c read error: %d\n", ret);
- - return ret;
-}
-
-
-/*
-[function]:
- burn the FW to ctpm.
-[parameters]:(ref. SPEC)
- pbt_buf[in] :point to Head+FW ;
- dw_lenth[in]:the length of the FW + 6(the Head length);
- bt_ecc[in] :the ECC of the FW
-[return]:
- ERR_OK :no error;
- ERR_MODE :fail to switch to UPDATE mode;
- ERR_READID :read id fail;
- ERR_ERASE :erase chip fail;
- ERR_STATUS :status error;
- ERR_ECC :ecc error.
-*/
-static E_UPGRADE_ERR_TYPE ft5x0x_fw_upgrade(struct ft5x0x_data *ft5x0x, u8* pbt_buf, int dw_lenth)
-{
- int i = 0,j = 0,i_ret;
- int packet_number;
- int temp,lenght;
- u8 packet_buf[FTS_PACKET_LENGTH + 6];
- u8 auc_i2c_write_buf[10];
- u8 reg_val[2] = {0};
- u8 ctpm_id[2] = {0};
- u8 cmd[4];
- u8 bt_ecc;
-
- /*********Step 1:Reset CTPM *****/
- /*write 0xaa to register 0xfc*/
- ft5x0x_write_reg(0xfc,0xaa);
- msleep(50);
- /*write 0x55 to register 0xfc*/
- ft5x0x_write_reg(0xfc,0x55);
- printk("[FTS] Step 1: Reset CTPM.\n");
- msleep(30);
-
- /*********Step 2:Enter upgrade mode *****/
- auc_i2c_write_buf[0] = 0x55;
- auc_i2c_write_buf[1] = 0xaa;
- do{
- i ++;
- i_ret = byte_write(auc_i2c_write_buf, 2);
- mdelay(5);
- }while(i_ret <= 0 && i < 5 );
- msleep(20);
-
- /*********Step 3:check READ-ID**********/
- if(ft5x0x->id == FT5606){
- ctpm_id[0] = FT56_CTPM_ID_L;
- ctpm_id[1] = FT56_CTPM_ID_H;
- }else{
- ctpm_id[0] = FT5X_CTPM_ID_L;
- ctpm_id[1] = FT5X_CTPM_ID_H;
- }
-
- cmd[0] = 0x90;
- cmd[1] = 0x00;
- cmd[2] = 0x00;
- cmd[3] = 0x00;
- cmd_write(cmd,4);
- byte_read(reg_val,2);
- if (reg_val[0] == ctpm_id[0] && reg_val[1] == ctpm_id[1]){
- printk("[FTS] Step 3: CTPM ID,ID1 = 0x%x,ID2 = 0x%x\n",reg_val[0],reg_val[1]);
- }else{
- printk("[FTS] ID_ERROR: CTPM ID,ID1 = 0x%x,ID2 = 0x%x\n",reg_val[0],reg_val[1]);
- return ERR_READID;
- }
-
- cmd[0] = 0xcd;
- cmd_write(cmd,1);
- byte_read(reg_val,1);
- printk("[FTS] bootloader version = 0x%x\n", reg_val[0]);
-
- /******Step 4:erase app and panel paramenter area *********/
- cmd[0] = 0x61;
- cmd_write(cmd,1); //erase app area
- msleep(1500);
- cmd[0] = 0x63;
- cmd_write(cmd,1); //erase panel parameter area
- msleep(100);
- printk("[FTS] Step 4: erase. \n");
-
- /*********Step 5:write firmware(FW) to ctpm flash*********/
- bt_ecc = 0;
- printk("[FTS] Step 5: start upgrade. \n");
- dw_lenth = dw_lenth - 8;
- packet_number = (dw_lenth) / FTS_PACKET_LENGTH;
- packet_buf[0] = 0xbf;
- packet_buf[1] = 0x00;
- for (j=0;j<packet_number;j++){
- temp = j * FTS_PACKET_LENGTH;
- packet_buf[2] = (u8)(temp>>8);
- packet_buf[3] = (u8)temp;
- lenght = FTS_PACKET_LENGTH;
- packet_buf[4] = (u8)(lenght>>8);
- packet_buf[5] = (u8)lenght;
-
- for (i=0;i<FTS_PACKET_LENGTH;i++){
- packet_buf[6+i] = pbt_buf[j*FTS_PACKET_LENGTH + i];
- bt_ecc ^= packet_buf[6+i];
- }
-
- byte_write(&packet_buf[0],FTS_PACKET_LENGTH + 6);
- mdelay(FTS_PACKET_LENGTH/6 + 1);
- if ((j * FTS_PACKET_LENGTH % 1024) == 0){
- printk("[FTS] upgrade the 0x%x th byte.\n", ((unsigned int)j) * FTS_PACKET_LENGTH);
- }
- }
-
- if ((dw_lenth) % FTS_PACKET_LENGTH > 0){
- temp = packet_number * FTS_PACKET_LENGTH;
- packet_buf[2] = (u8)(temp>>8);
- packet_buf[3] = (u8)temp;
-
- temp = (dw_lenth) % FTS_PACKET_LENGTH;
- packet_buf[4] = (u8)(temp>>8);
- packet_buf[5] = (u8)temp;
-
- for (i=0;i<temp;i++){
- packet_buf[6+i] = pbt_buf[ packet_number*FTS_PACKET_LENGTH + i];
- bt_ecc ^= packet_buf[6+i];
- }
-
- byte_write(&packet_buf[0],temp+6);
- mdelay(20);
- }
-
- //send the last six byte
- for (i = 0; i<6; i++){
- temp = 0x6ffa + i;
- packet_buf[2] = (u8)(temp>>8);
- packet_buf[3] = (u8)temp;
- temp =1;
- packet_buf[4] = (u8)(temp>>8);
- packet_buf[5] = (u8)temp;
- packet_buf[6] = pbt_buf[ dw_lenth + i];
- bt_ecc ^= packet_buf[6];
-
- byte_write(&packet_buf[0],7);
- mdelay(20);
- }
-
- /*********Step 6: read out checksum********************/
- /*send the opration head*/
- cmd[0] = 0xcc;
- cmd_write(cmd,1);
- byte_read(reg_val,1);
- printk("[FTS] Step 6:read ECC 0x%x, firmware ECC 0x%x. \n", reg_val[0], bt_ecc);
- if(reg_val[0] != bt_ecc){
- return ERR_ECC;
- }
-
- /*********Step 7: reset the new FW***********************/
- cmd[0] = 0x07;
- cmd_write(cmd,1);
-
- msleep(300); //make sure CTP startup normally
-
- return ERR_OK;
-}
-
-int ft5x0x_auto_clb(void)
-{
- u8 uc_temp;
- u8 i ;
-
- printk("[FTS] start auto CLB.\n");
- msleep(200);
- ft5x0x_write_reg(0, 0x40);
- msleep(100); //make sure already enter factory mode
- ft5x0x_write_reg(2, 0x4); //write command to start calibration
- msleep(300);
- for(i=0;i<100;i++){
- ft5x0x_read_reg(0,&uc_temp);
- if ( ((uc_temp&0x70)>>4) == 0x0){ //return to normal mode, calibration finish
- break;
- }
- msleep(200);
- printk("[FTS] waiting calibration %d\n",i);
- }
- printk("[FTS] calibration OK.\n");
-
- msleep(300);
- ft5x0x_write_reg(0, 0x40); //goto factory mode
- msleep(100); //make sure already enter factory mode
- ft5x0x_write_reg(2, 0x5); //store CLB result
- msleep(300);
- ft5x0x_write_reg(0, 0x0); //return to normal mode
- msleep(300);
- printk("[FTS] store CLB result OK.\n");
- return 0;
-}
-
-static int ft5x0x_get_bin_ver(const u8 *fw, int fw_szie)
-{
- if (fw_szie > 2){
- return fw[fw_szie - 2];
- }else{
- return 0xff; //default value
- }
- return 0xff;
-}
-
-int ft5x0x_read_fw_ver(void)
-{
- u8 ver=0;
- int ret=0;
-
- ret = ft5x0x_read_reg(FT5X0X_REG_FIRMID, &ver);
- if(ret > 0)
- return ver;
-
- return ret;
-}
-
-
-static int ft5x0x_get_fw_szie(const char *fw_name)
-{
- struct file *pfile = NULL;
- struct inode *inode;
- unsigned long magic;
- off_t fsize = 0;
-
- if(fw_name == NULL){
- dbg_err("Firmware name error.\n");
- return -EFAULT;
- }
-
- if (NULL == pfile)
- pfile = filp_open(fw_name, O_RDONLY, 0);
-
- if (IS_ERR(pfile)) {
- dbg_err("File open error: %s.\n", fw_name);
- return -EIO;
- }
-
- inode = pfile->f_dentry->d_inode;
- magic = inode->i_sb->s_magic;
- fsize = inode->i_size;
- filp_close(pfile, NULL);
- return fsize;
-}
-
-static int ft5x0x_read_fw(const char *fw_name, u8 *buf)
-{
- struct file *pfile = NULL;
- struct inode *inode;
- unsigned long magic;
- off_t fsize;
- loff_t pos;
- mm_segment_t fs;
-
- if(fw_name == NULL){
- dbg_err("Firmware name error.\n");
- return -EFAULT;
- }
-
- if (NULL == pfile)
- pfile = filp_open(fw_name, O_RDONLY, 0);
- if (IS_ERR(pfile)) {
- dbg_err("File open error: %s.\n", fw_name);
- return -EIO;
- }
-
- inode = pfile->f_dentry->d_inode;
- magic = inode->i_sb->s_magic;
- fsize = inode->i_size;
- fs = get_fs();
- set_fs(KERNEL_DS);
- pos = 0;
- vfs_read(pfile, buf, fsize, &pos);
- filp_close(pfile, NULL);
- set_fs(fs);
-
- return 0;
-}
-
-#define FW_SUFFFIX ".bin"
-#define SD_UPG_BIN_PATH "/sdcard/_wmt_ft5x0x_fw_app.bin"
-#define FS_UPG_BIN_PATH "/lib/firmware/"
-
-int ft5x0x_upg_fw_bin(struct ft5x0x_data *ft5x0x, int check_ver)
-{
- int i_ret = 0;
- int fwsize = 0;
- int hw_fw_ver;
- int bin_fw_ver;
- int do_upg;
- u8 *pbt_buf = NULL;
- u8 fw_path[128] = {0};
-
- if(ft5x0x->upg)
- sprintf(fw_path,"%s%s%s", FS_UPG_BIN_PATH, ft5x0x->fw_name,FW_SUFFFIX);//get fw binary file from filesystem
- else
- strcpy(fw_path,SD_UPG_BIN_PATH); //get fw binary file from SD card
-
- fwsize = ft5x0x_get_fw_szie(fw_path);
- if (fwsize <= 0) {
- dbg_err("Get firmware size failed\n");
- return -EIO;
- }
-
- if (fwsize < 8 || fwsize > 32 * 1024) {
- dbg_err("FW length error\n");
- return -EIO;
- }
-
- pbt_buf = kmalloc(fwsize + 1, GFP_KERNEL);
- if (ft5x0x_read_fw(fw_path, pbt_buf)) {
- dbg_err("Request_firmware failed\n");
- i_ret = -EIO;
- goto exit;
- }
-
- hw_fw_ver =ft5x0x_read_fw_ver();
- if(hw_fw_ver <= 0){
- dbg_err("Read firmware version failed\n");
- i_ret = hw_fw_ver;
- goto exit;
- }
-
- bin_fw_ver = ft5x0x_get_bin_ver(pbt_buf, fwsize);
- printk("[FTS] hardware fw ver 0x%0x, binary ver 0x%0x\n",hw_fw_ver, bin_fw_ver);
-
- if(check_ver){
- if(hw_fw_ver == 0xa6 || hw_fw_ver < bin_fw_ver)
- do_upg = 1;
- else
- do_upg = 0;
- }else{
- do_upg = 1;
- }
-
- if(do_upg){
- if ((pbt_buf[fwsize - 8] ^ pbt_buf[fwsize - 6]) == 0xFF &&
- (pbt_buf[fwsize - 7] ^ pbt_buf[fwsize - 5]) == 0xFF &&
- (pbt_buf[fwsize - 3] ^ pbt_buf[fwsize - 4]) == 0xFF) {
- i_ret = ft5x0x_fw_upgrade(ft5x0x, pbt_buf, fwsize);
- if (i_ret)
- dbg_err("Upgrade failed, i_ret=%d\n",i_ret);
- else {
- hw_fw_ver = ft5x0x_read_fw_ver();
- printk("[FTS] upgrade to new version 0x%x\n", hw_fw_ver);
- }
- } else {
- dbg_err("FW format error\n");
- }
- }
-
- ft5x0x_auto_clb();/*start auto CLB*/
-
-exit:
- kfree(pbt_buf);
- return i_ret;
-}
-
-
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ini.c b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ini.c deleted file mode 100755 index a4f8dc38..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ini.c +++ /dev/null @@ -1,406 +0,0 @@ -#include <linux/string.h>
-#include <asm/unistd.h>
-#include <linux/slab.h> -
-#include "ini.h"
-
-
-char CFG_SSL = '['; /* 项标志符Section Symbol --可根据特殊需要进行定义更改，如 { }等*/
-char CFG_SSR = ']'; /* 项标志符Section Symbol --可根据特殊需要进行定义更改，如 { }等*/ -char CFG_NIS = ':'; /* name 与 index 之间的分隔符 */ -char CFG_NTS = '#'; /* 注释符*/ - -static char * ini_str_trim_r(char * buf);
-static char * ini_str_trim_l(char * buf);
-static int ini_file_get_line(char *filedata, char *buffer, int maxlen);
-static int ini_split_key_value(char *buf, char **key, char **val);
-static long atol(char *nptr);
-
-
-/*************************************************************
-Function: 获得key的值
-Input: char * filedata 文件；char * section 项值；char * key 键值
-Output: char * value key的值
-Return: 0 SUCCESS
- -1 未找到section
- -2 未找到key
- -10 文件打开失败
- -12 读取文件失败
- -14 文件格式错误
- -22 超出缓冲区大小
-Note:
-*************************************************************/
-int ini_get_key(char *filedata, char * section, char * key, char * value)
-{
- //char buf1[MAX_CFG_BUF + 1], buf2[MAX_CFG_BUF + 1];
- char *buf1, *buf2;
- char *key_ptr, *val_ptr;
- int n, ret;
- int dataoff = 0;
-
- *value='\0';
-
- buf1 = kzalloc(MAX_CFG_BUF + 1, GFP_KERNEL); - if(!buf1){ - printk("buf1: mem alloc failed.\n"); - return -ENOMEM; - } - buf2 = kzalloc(MAX_CFG_BUF + 1, GFP_KERNEL); - if(!buf2){ - printk("buf2: mem alloc failed.\n"); - kfree(buf1); - return -ENOMEM; - } - - while(1) { /* 搜找项section */
- ret = CFG_ERR_READ_FILE;
- n = ini_file_get_line(filedata+dataoff, buf1, MAX_CFG_BUF);
- dataoff += n;
- if(n < -1)
- goto r_cfg_end;
- ret = CFG_SECTION_NOT_FOUND;
- if(n < 0)
- goto r_cfg_end; /* 文件尾，未发现 */
-
- n = strlen(ini_str_trim_l(ini_str_trim_r(buf1)));
- if(n == 0 || buf1[0] == CFG_NTS)
- continue; /* 空行 或 注释行 */
-
- ret = CFG_ERR_FILE_FORMAT;
- if(n > 2 && ((buf1[0] == CFG_SSL && buf1[n-1] != CFG_SSR)))
- goto r_cfg_end;
- if(buf1[0] == CFG_SSL) {
- buf1[n-1] = 0x00;
- if(strcmp(buf1+1, section) == 0)
- break; /* 找到项section */
- }
- }
-
- while(1){ /* 搜找key */
- ret = CFG_ERR_READ_FILE;
- n = ini_file_get_line(filedata+dataoff, buf1, MAX_CFG_BUF);
- dataoff += n;
- if(n < -1)
- goto r_cfg_end;
- ret = CFG_KEY_NOT_FOUND;
- if(n < 0)
- goto r_cfg_end;/* 文件尾，未发现key */
-
- n = strlen(ini_str_trim_l(ini_str_trim_r(buf1)));
- if(n == 0 || buf1[0] == CFG_NTS)
- continue; /* 空行 或 注释行 */
- ret = CFG_KEY_NOT_FOUND;
- if(buf1[0] == CFG_SSL)
- goto r_cfg_end;
- if(buf1[n-1] == '+') { /* 遇+号表示下一行继续 */
- buf1[n-1] = 0x00;
- while(1) {
- ret = CFG_ERR_READ_FILE;
- n = ini_file_get_line(filedata+dataoff, buf2, MAX_CFG_BUF);
- dataoff += n;
- if(n < -1)
- goto r_cfg_end;
- if(n < 0)
- break;/* 文件结束 */
-
- n = strlen(ini_str_trim_r(buf2));
- ret = CFG_ERR_EXCEED_BUF_SIZE;
- if(n > 0 && buf2[n-1] == '+'){/* 遇+号表示下一行继续 */
- buf2[n-1] = 0x00;
- if( (strlen(buf1) + strlen(buf2)) > MAX_CFG_BUF)
- goto r_cfg_end;
- strcat(buf1, buf2);
- continue;
- }
- if(strlen(buf1) + strlen(buf2) > MAX_CFG_BUF)
- goto r_cfg_end;
- strcat(buf1, buf2);
- break;
- }
- }
- ret = CFG_ERR_FILE_FORMAT;
- if(ini_split_key_value(buf1, &key_ptr, &val_ptr) != 1)
- goto r_cfg_end;
- ini_str_trim_l(ini_str_trim_r(key_ptr));
- if(strcmp(key_ptr, key) != 0)
- continue; /* 和key值不匹配 */
- strcpy(value, val_ptr);
- break;
- }
- ret = CFG_OK;
-r_cfg_end:
- //if(fp != NULL) fclose(fp);
- kfree(buf1); - kfree(buf2); - return ret;
-}
-/*************************************************************
-Function: 获得所有section
-Input: char *filename 文件,int max 最大可返回的section的个数
-Output: char *sections[] 存放section名字
-Return: 返回section个数。若出错，返回负数。
- -10 文件打开出错
- -12 文件读取错误
- -14 文件格式错误
-Note:
-*************************************************************/
-int ini_get_sections(char *filedata, unsigned char * sections[], int max)
-{
- //FILE *fp;
- char buf1[MAX_CFG_BUF + 1];
- int n, n_sections = 0, ret;
- int dataoff = 0;
-
-// if((fp = fopen(filename, "rb")) == NULL)
-// return CFG_ERR_OPEN_FILE;
-
- while(1) {/*搜找项section */
- ret = CFG_ERR_READ_FILE;
- n = ini_file_get_line(filedata+dataoff, buf1, MAX_CFG_BUF);
- dataoff += n;
- if(n < -1)
- goto cfg_scts_end;
- if(n < 0)
- break;/* 文件尾 */
- n = strlen(ini_str_trim_l(ini_str_trim_r(buf1)));
- if(n == 0 || buf1[0] == CFG_NTS)
- continue; /* 空行 或 注释行 */
- ret = CFG_ERR_FILE_FORMAT;
- if(n > 2 && ((buf1[0] == CFG_SSL && buf1[n-1] != CFG_SSR)))
- goto cfg_scts_end;
- if(buf1[0] == CFG_SSL) {
- if (max!=0){
- buf1[n-1] = 0x00;
- strcpy((char *)sections[n_sections], buf1+1);
- if (n_sections>=max)
- break; /* 超过可返回最大个数 */
- }
- n_sections++;
- }
-
- }
- ret = n_sections;
-cfg_scts_end:
-// if(fp != NULL)
-// fclose(fp);
- return ret;
-}
-
-
-/*************************************************************
-Function: 去除字符串右边的空字符
-Input: char * buf 字符串指针
-Output:
-Return: 字符串指针
-Note:
-*************************************************************/
-static char * ini_str_trim_r(char * buf)
-{
- int len,i;
- char tmp[128];
-
- memset(tmp, 0, sizeof(tmp));
- len = strlen(buf);
-// tmp = (char *)malloc(len);
-
- memset(tmp,0x00,len);
- for(i = 0;i < len;i++) {
- if (buf[i] !=' ')
- break;
- }
- if (i < len) {
- strncpy(tmp,(buf+i),(len-i));
- }
- strncpy(buf,tmp,len);
-// free(tmp);
- return buf;
-}
-
-/*************************************************************
-Function: 去除字符串左边的空字符
-Input: char * buf 字符串指针
-Output:
-Return: 字符串指针
-Note:
-*************************************************************/
-static char * ini_str_trim_l(char * buf)
-{
- int len,i;
- char tmp[128];
-
- memset(tmp, 0, sizeof(tmp));
- len = strlen(buf);
- //tmp = (char *)malloc(len);
-
- memset(tmp,0x00,len);
-
- for(i = 0;i < len;i++) {
- if (buf[len-i-1] !=' ')
- break;
- }
- if (i < len) {
- strncpy(tmp,buf,len-i);
- }
- strncpy(buf,tmp,len);
- //free(tmp);
- return buf;
-}
-/*************************************************************
-Function: 从文件中读取一行
-Input: FILE *fp 文件句柄；int maxlen 缓冲区最大长度
-Output: char *buffer 一行字符串
-Return: >0 实际读的长度
- -1 文件结束
- -2 读文件出错
-Note:
-*************************************************************/
-static int ini_file_get_line(char *filedata, char *buffer, int maxlen)
-{
- int i, j;
- char ch1;
-
- for(i=0, j=0; i<maxlen; j++) {
- ch1 = filedata[j];
- if(ch1 == '\n' || ch1 == 0x00)
- break; /* 换行 */
- if(ch1 == '\f' || ch1 == 0x1A) { /* '\f':换页符也算有效字符 */
- buffer[i++] = ch1;
- break;
- }
- if(ch1 != '\r') buffer[i++] = ch1; /* 忽略回车符 */
- }
- buffer[i] = '\0';
- return i+2;
-}
-/*************************************************************
-Function: 分离key和value
- key=val
- jack = liaoyuewang
- | | |
- k1 k2 i
-Input: char *buf
-Output: char **key, char **val
-Return: 1 --- ok
- 0 --- blank line
- -1 --- no key, "= val"
- -2 --- only key, no '='
-Note:
-*************************************************************/
-static int ini_split_key_value(char *buf, char **key, char **val)
-{
- int i, k1, k2, n;
-
- if((n = strlen((char *)buf)) < 1)
- return 0;
- for(i = 0; i < n; i++)
- if(buf[i] != ' ' && buf[i] != '\t')
- break;
-
- if(i >= n)
- return 0;
-
- if(buf[i] == '=')
- return -1;
-
- k1 = i;
- for(i++; i < n; i++)
- if(buf[i] == '=')
- break;
-
- if(i >= n)
- return -2;
- k2 = i;
-
- for(i++; i < n; i++)
- if(buf[i] != ' ' && buf[i] != '\t')
- break;
-
- buf[k2] = '\0';
-
- *key = buf + k1;
- *val = buf + i;
- return 1;
-}
-
-int my_atoi(const char *str)
-{
- int result = 0;
- int signal = 1; /* 默认为正数 */
- if((*str>='0'&&*str<='9')||*str=='-'||*str=='+') {
- if(*str=='-'||*str=='+') {
- if(*str=='-')
- signal = -1; /*输入负数*/
- str++;
- }
- }
- else
- return 0;
- /*开始转换*/
- while(*str>='0' && *str<='9')
- result = result*10 + (*str++ - '0' );
-
- return signal*result;
-}
-
-int isspace(int x)
-{
- if(x==' '||x=='\t'||x=='\n'||x=='\f'||x=='\b'||x=='\r')
- return 1;
- else
- return 0;
-}
-
-int isdigit(int x)
-{
- if(x<='9' && x>='0')
- return 1;
- else
- return 0;
-
-}
-
-static long atol(char *nptr)
-{
- int c; /* current char */
- long total; /* current total */
- int sign; /* if ''-'', then negative, otherwise positive */
- /* skip whitespace */
- while ( isspace((int)(unsigned char)*nptr) )
- ++nptr;
- c = (int)(unsigned char)*nptr++;
- sign = c; /* save sign indication */
- if (c == '-' || c == '+')
- c = (int)(unsigned char)*nptr++; /* skip sign */
- total = 0;
- while (isdigit(c)) {
- total = 10 * total + (c - '0'); /* accumulate digit */
- c = (int)(unsigned char)*nptr++; /* get next char */
- }
- if (sign == '-')
- return -total;
- else
- return total; /* return result, negated if necessary */
-}
-/***
-*int atoi(char *nptr) - Convert string to long
-*
-*Purpose:
-* Converts ASCII string pointed to by nptr to binary.
-* Overflow is not detected. Because of this, we can just use
-* atol().
-*
-*Entry:
-* nptr = ptr to string to convert
-*
-*Exit:
-* return int value of the string
-*
-*Exceptions:
-* None - overflow is not detected.
-*
-*******************************************************************************/
-int atoi(char *nptr)
-{
- return (int)atol(nptr);
-}
-
diff --git a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ini.h b/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ini.h deleted file mode 100755 index 72434b53..00000000 --- a/ANDROID_3.4.5/drivers/input/touchscreen/ft5x0x/ini.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef INI_H -#define INI_H - -#define MAX_CFG_BUF 512 -#define SUCCESS 0 -/* return value */ -#define CFG_OK SUCCESS -#define CFG_SECTION_NOT_FOUND -1 -#define CFG_KEY_NOT_FOUND -2 -#define CFG_ERR -10 - -#define CFG_ERR_OPEN_FILE -10 -#define CFG_ERR_CREATE_FILE -11 -#define CFG_ERR_READ_FILE -12 -#define CFG_ERR_WRITE_FILE -13 -#define CFG_ERR_FILE_FORMAT -14 - - -#define CFG_ERR_EXCEED_BUF_SIZE -22 - -#define COPYF_OK SUCCESS -#define COPYF_ERR_OPEN_FILE -10 -#define COPYF_ERR_CREATE_FILE -11 -#define COPYF_ERR_READ_FILE -12 -#define COPYF_ERR_WRITE_FILE -13 - - -struct ini_key_location { - int ini_section_line_no; - int ini_key_line_no; - int ini_key_lines; -}; - - -int ini_get_key(char *filedata, char * section, char * key, char * value); -int ini_get_sections(char *filedata, unsigned char * sections[], int max); - -int ini_split_section(char *section, char **name, char **index); -//int ini_join_section(char **section, char *name, char *index); - -int atoi(char *nptr); - -#endif |