diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/i2c/busses/i2c-xlr.c')
| -rw-r--r-- | ANDROID_3.4.5/drivers/i2c/busses/i2c-xlr.c | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/ANDROID_3.4.5/drivers/i2c/busses/i2c-xlr.c b/ANDROID_3.4.5/drivers/i2c/busses/i2c-xlr.c deleted file mode 100644 index 96d3fabd..00000000 --- a/ANDROID_3.4.5/drivers/i2c/busses/i2c-xlr.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Copyright 2011, Netlogic Microsystems Inc. - * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/i2c.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -/* XLR I2C REGISTERS */ -#define XLR_I2C_CFG 0x00 -#define XLR_I2C_CLKDIV 0x01 -#define XLR_I2C_DEVADDR 0x02 -#define XLR_I2C_ADDR 0x03 -#define XLR_I2C_DATAOUT 0x04 -#define XLR_I2C_DATAIN 0x05 -#define XLR_I2C_STATUS 0x06 -#define XLR_I2C_STARTXFR 0x07 -#define XLR_I2C_BYTECNT 0x08 -#define XLR_I2C_HDSTATIM 0x09 - -/* XLR I2C REGISTERS FLAGS */ -#define XLR_I2C_BUS_BUSY 0x01 -#define XLR_I2C_SDOEMPTY 0x02 -#define XLR_I2C_RXRDY 0x04 -#define XLR_I2C_ACK_ERR 0x08 -#define XLR_I2C_ARB_STARTERR 0x30 - -/* Register Values */ -#define XLR_I2C_CFG_ADDR 0xF8 -#define XLR_I2C_CFG_NOADDR 0xFA -#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */ -#define XLR_I2C_STARTXFR_RD 0x01 /* Read */ -#define XLR_I2C_STARTXFR_WR 0x00 /* Write */ - -#define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */ - -/* - * On XLR/XLS, we need to use __raw_ IO to read the I2C registers - * because they are in the big-endian MMIO area on the SoC. - * - * The readl/writel implementation on XLR/XLS byteswaps, because - * those are for its little-endian PCI space (see arch/mips/Kconfig). - */ -static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val) -{ - __raw_writel(val, base + reg); -} - -static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg) -{ - return __raw_readl(base + reg); -} - -struct xlr_i2c_private { - struct i2c_adapter adap; - u32 __iomem *iobase; -}; - -static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len, - u8 *buf, u16 addr) -{ - struct i2c_adapter *adap = &priv->adap; - unsigned long timeout, stoptime, checktime; - u32 i2c_status; - int pos, timedout; - u8 offset, byte; - - offset = buf[0]; - xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset); - xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); - xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_ADDR); - xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); - - timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); - stoptime = jiffies + timeout; - timedout = 0; - pos = 1; -retry: - if (len == 1) { - xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, - XLR_I2C_STARTXFR_ND); - } else { - xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos]); - xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, - XLR_I2C_STARTXFR_WR); - } - - while (!timedout) { - checktime = jiffies; - i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); - - if (i2c_status & XLR_I2C_SDOEMPTY) { - pos++; - /* need to do a empty dataout after the last byte */ - byte = (pos < len) ? buf[pos] : 0; - xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, byte); - - /* reset timeout on successful xmit */ - stoptime = jiffies + timeout; - } - timedout = time_after(checktime, stoptime); - - if (i2c_status & XLR_I2C_ARB_STARTERR) { - if (timedout) - break; - goto retry; - } - - if (i2c_status & XLR_I2C_ACK_ERR) - return -EIO; - - if ((i2c_status & XLR_I2C_BUS_BUSY) == 0 && pos >= len) - return 0; - } - dev_err(&adap->dev, "I2C transmit timeout\n"); - return -ETIMEDOUT; -} - -static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) -{ - struct i2c_adapter *adap = &priv->adap; - u32 i2c_status; - unsigned long timeout, stoptime, checktime; - int nbytes, timedout; - u8 byte; - - xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR); - xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len); - xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); - - timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); - stoptime = jiffies + timeout; - timedout = 0; - nbytes = 0; -retry: - xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD); - - while (!timedout) { - checktime = jiffies; - i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); - if (i2c_status & XLR_I2C_RXRDY) { - if (nbytes > len) - return -EIO; /* should not happen */ - - /* we need to do a dummy datain when nbytes == len */ - byte = xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); - if (nbytes < len) - buf[nbytes] = byte; - nbytes++; - - /* reset timeout on successful read */ - stoptime = jiffies + timeout; - } - - timedout = time_after(checktime, stoptime); - if (i2c_status & XLR_I2C_ARB_STARTERR) { - if (timedout) - break; - goto retry; - } - - if (i2c_status & XLR_I2C_ACK_ERR) - return -EIO; - - if ((i2c_status & XLR_I2C_BUS_BUSY) == 0) - return 0; - } - - dev_err(&adap->dev, "I2C receive timeout\n"); - return -ETIMEDOUT; -} - -static int xlr_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, int num) -{ - struct i2c_msg *msg; - int i; - int ret = 0; - struct xlr_i2c_private *priv = i2c_get_adapdata(adap); - - for (i = 0; ret == 0 && i < num; i++) { - msg = &msgs[i]; - if (msg->flags & I2C_M_RD) - ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0], - msg->addr); - else - ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0], - msg->addr); - } - - return (ret != 0) ? ret : num; -} - -static u32 xlr_func(struct i2c_adapter *adap) -{ - /* Emulate SMBUS over I2C */ - return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; -} - -static struct i2c_algorithm xlr_i2c_algo = { - .master_xfer = xlr_i2c_xfer, - .functionality = xlr_func, -}; - -static int __devinit xlr_i2c_probe(struct platform_device *pdev) -{ - struct xlr_i2c_private *priv; - struct resource *res; - int ret; - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->iobase = devm_request_and_ioremap(&pdev->dev, res); - if (!priv->iobase) { - dev_err(&pdev->dev, "devm_request_and_ioremap failed\n"); - return -EBUSY; - } - - priv->adap.dev.parent = &pdev->dev; - priv->adap.owner = THIS_MODULE; - priv->adap.algo_data = priv; - priv->adap.algo = &xlr_i2c_algo; - priv->adap.nr = pdev->id; - priv->adap.class = I2C_CLASS_HWMON; - snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c"); - - i2c_set_adapdata(&priv->adap, priv); - ret = i2c_add_numbered_adapter(&priv->adap); - if (ret < 0) { - dev_err(&priv->adap.dev, "Failed to add i2c bus.\n"); - return ret; - } - - platform_set_drvdata(pdev, priv); - dev_info(&priv->adap.dev, "Added I2C Bus.\n"); - return 0; -} - -static int __devexit xlr_i2c_remove(struct platform_device *pdev) -{ - struct xlr_i2c_private *priv; - - priv = platform_get_drvdata(pdev); - i2c_del_adapter(&priv->adap); - platform_set_drvdata(pdev, NULL); - return 0; -} - -static struct platform_driver xlr_i2c_driver = { - .probe = xlr_i2c_probe, - .remove = __devexit_p(xlr_i2c_remove), - .driver = { - .name = "xlr-i2cbus", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(xlr_i2c_driver); - -MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>"); -MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:xlr-i2cbus"); |