1 files changed, 0 insertions, 311 deletions
diff --git a/ANDROID_3.4.5/drivers/hwmon/ads1015.c b/ANDROID_3.4.5/drivers/hwmon/ads1015.c
deleted file mode 100644
index 1958f03e..00000000
--- a/ANDROID_3.4.5/drivers/hwmon/ads1015.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC
- * (C) Copyright 2010
- * Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
- *
- * Based on the ads7828 driver by Steve Hardy.
- *
- * Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-
-#include <linux/i2c/ads1015.h>
-
-/* ADS1015 registers */
-enum {
-	ADS1015_CONVERSION = 0,
-	ADS1015_CONFIG = 1,
-};
-
-/* PGA fullscale voltages in mV */
-static const unsigned int fullscale_table[8] = {
-	6144, 4096, 2048, 1024, 512, 256, 256, 256 };
-
-/* Data rates in samples per second */
-static const unsigned int data_rate_table[8] = {
-	128, 250, 490, 920, 1600, 2400, 3300, 3300 };
-
-#define ADS1015_DEFAULT_CHANNELS 0xff
-#define ADS1015_DEFAULT_PGA 2
-#define ADS1015_DEFAULT_DATA_RATE 4
-
-struct ads1015_data {
-	struct device *hwmon_dev;
-	struct mutex update_lock; /* mutex protect updates */
-	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
-};
-
-static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
-{
-	u16 config;
-	struct ads1015_data *data = i2c_get_clientdata(client);
-	unsigned int pga = data->channel_data[channel].pga;
-	unsigned int data_rate = data->channel_data[channel].data_rate;
-	unsigned int conversion_time_ms;
-	int res;
-
-	mutex_lock(&data->update_lock);
-
-	/* get channel parameters */
-	res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
-	if (res < 0)
-		goto err_unlock;
-	config = res;
-	conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]);
-
-	/* setup and start single conversion */
-	config &= 0x001f;
-	config |= (1 << 15) | (1 << 8);
-	config |= (channel & 0x0007) << 12;
-	config |= (pga & 0x0007) << 9;
-	config |= (data_rate & 0x0007) << 5;
-
-	res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
-	if (res < 0)
-		goto err_unlock;
-
-	/* wait until conversion finished */
-	msleep(conversion_time_ms);
-	res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
-	if (res < 0)
-		goto err_unlock;
-	config = res;
-	if (!(config & (1 << 15))) {
-		/* conversion not finished in time */
-		res = -EIO;
-		goto err_unlock;
-	}
-
-	res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
-
-err_unlock:
-	mutex_unlock(&data->update_lock);
-	return res;
-}
-
-static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
-			     s16 reg)
-{
-	struct ads1015_data *data = i2c_get_clientdata(client);
-	unsigned int pga = data->channel_data[channel].pga;
-	int fullscale = fullscale_table[pga];
-
-	return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0);
-}
-
-/* sysfs callback function */
-static ssize_t show_in(struct device *dev, struct device_attribute *da,
-	char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-	struct i2c_client *client = to_i2c_client(dev);
-	int res;
-	int index = attr->index;
-
-	res = ads1015_read_adc(client, index);
-	if (res < 0)
-		return res;
-
-	return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res));
-}
-
-static const struct sensor_device_attribute ads1015_in[] = {
-	SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
-	SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
-	SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
-	SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
-	SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
-	SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
-	SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
-	SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
-};
-
-/*
- * Driver interface
- */
-
-static int ads1015_remove(struct i2c_client *client)
-{
-	struct ads1015_data *data = i2c_get_clientdata(client);
-	int k;
-
-	hwmon_device_unregister(data->hwmon_dev);
-	for (k = 0; k < ADS1015_CHANNELS; ++k)
-		device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-	kfree(data);
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static int ads1015_get_channels_config_of(struct i2c_client *client)
-{
-	struct ads1015_data *data = i2c_get_clientdata(client);
-	struct device_node *node;
-
-	if (!client->dev.of_node
-	    || !of_get_next_child(client->dev.of_node, NULL))
-		return -EINVAL;
-
-	for_each_child_of_node(client->dev.of_node, node) {
-		const __be32 *property;
-		int len;
-		unsigned int channel;
-		unsigned int pga = ADS1015_DEFAULT_PGA;
-		unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
-
-		property = of_get_property(node, "reg", &len);
-		if (!property || len != sizeof(int)) {
-			dev_err(&client->dev, "invalid reg on %s\n",
-				node->full_name);
-			continue;
-		}
-
-		channel = be32_to_cpup(property);
-		if (channel > ADS1015_CHANNELS) {
-			dev_err(&client->dev,
-				"invalid channel index %d on %s\n",
-				channel, node->full_name);
-			continue;
-		}
-
-		property = of_get_property(node, "ti,gain", &len);
-		if (property && len == sizeof(int)) {
-			pga = be32_to_cpup(property);
-			if (pga > 6) {
-				dev_err(&client->dev,
-					"invalid gain on %s\n",
-					node->full_name);
-			}
-		}
-
-		property = of_get_property(node, "ti,datarate", &len);
-		if (property && len == sizeof(int)) {
-			data_rate = be32_to_cpup(property);
-			if (data_rate > 7) {
-				dev_err(&client->dev,
-					"invalid data_rate on %s\n",
-					node->full_name);
-			}
-		}
-
-		data->channel_data[channel].enabled = true;
-		data->channel_data[channel].pga = pga;
-		data->channel_data[channel].data_rate = data_rate;
-	}
-
-	return 0;
-}
-#endif
-
-static void ads1015_get_channels_config(struct i2c_client *client)
-{
-	unsigned int k;
-	struct ads1015_data *data = i2c_get_clientdata(client);
-	struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
-
-	/* prefer platform data */
-	if (pdata) {
-		memcpy(data->channel_data, pdata->channel_data,
-		       sizeof(data->channel_data));
-		return;
-	}
-
-#ifdef CONFIG_OF
-	if (!ads1015_get_channels_config_of(client))
-		return;
-#endif
-
-	/* fallback on default configuration */
-	for (k = 0; k < ADS1015_CHANNELS; ++k) {
-		data->channel_data[k].enabled = true;
-		data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
-		data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE;
-	}
-}
-
-static int ads1015_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct ads1015_data *data;
-	int err;
-	unsigned int k;
-
-	data = kzalloc(sizeof(struct ads1015_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(client, data);
-	mutex_init(&data->update_lock);
-
-	/* build sysfs attribute group */
-	ads1015_get_channels_config(client);
-	for (k = 0; k < ADS1015_CHANNELS; ++k) {
-		if (!data->channel_data[k].enabled)
-			continue;
-		err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
-		if (err)
-			goto exit_remove;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
-
-	return 0;
-
-exit_remove:
-	for (k = 0; k < ADS1015_CHANNELS; ++k)
-		device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
-	kfree(data);
-exit:
-	return err;
-}
-
-static const struct i2c_device_id ads1015_id[] = {
-	{ "ads1015", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ads1015_id);
-
-static struct i2c_driver ads1015_driver = {
-	.driver = {
-		.name = "ads1015",
-	},
-	.probe = ads1015_probe,
-	.remove = ads1015_remove,
-	.id_table = ads1015_id,
-};
-
-module_i2c_driver(ads1015_driver);
-
-MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>");
-MODULE_DESCRIPTION("ADS1015 driver");
-MODULE_LICENSE("GPL");