diff options
Diffstat (limited to 'ANDROID_3.4.5/drivers/bcma')
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/Kconfig | 57 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/Makefile | 10 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/README | 19 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/TODO | 3 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/bcma_private.h | 59 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/core.c | 127 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/driver_chipcommon.c | 157 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/driver_chipcommon_pmu.c | 313 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/driver_mips.c | 256 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/driver_pci.c | 226 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/driver_pci_host.c | 589 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/host_pci.c | 292 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/host_soc.c | 183 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/main.c | 387 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/scan.c | 507 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/scan.h | 56 | ||||
| -rw-r--r-- | ANDROID_3.4.5/drivers/bcma/sprom.c | 453 |
17 files changed, 3694 insertions, 0 deletions
diff --git a/ANDROID_3.4.5/drivers/bcma/Kconfig b/ANDROID_3.4.5/drivers/bcma/Kconfig new file mode 100644 index 00000000..fb7c80fb --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/Kconfig @@ -0,0 +1,57 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA + default y + +menu "Broadcom specific AMBA" + depends on BCMA_POSSIBLE + +config BCMA + tristate "BCMA support" + depends on BCMA_POSSIBLE + help + Bus driver for Broadcom specific Advanced Microcontroller Bus + Architecture. + +# Support for Block-I/O. SELECT this from the driver that needs it. +config BCMA_BLOCKIO + bool + depends on BCMA + +config BCMA_HOST_PCI_POSSIBLE + bool + depends on BCMA && PCI = y + default y + +config BCMA_HOST_PCI + bool "Support for BCMA on PCI-host bus" + depends on BCMA_HOST_PCI_POSSIBLE + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" + depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + +config BCMA_HOST_SOC + bool + depends on BCMA_DRIVER_MIPS + +config BCMA_DRIVER_MIPS + bool "BCMA Broadcom MIPS core driver" + depends on BCMA && MIPS + help + Driver for the Broadcom MIPS core attached to Broadcom specific + Advanced Microcontroller Bus. + + If unsure, say N + +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA + help + This turns on additional debugging messages. + + If unsure, say N + +endmenu diff --git a/ANDROID_3.4.5/drivers/bcma/Makefile b/ANDROID_3.4.5/drivers/bcma/Makefile new file mode 100644 index 00000000..82de24e5 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/Makefile @@ -0,0 +1,10 @@ +bcma-y += main.o scan.o core.o sprom.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o +bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o +bcma-$(CONFIG_BCMA_HOST_SOC) += host_soc.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG diff --git a/ANDROID_3.4.5/drivers/bcma/README b/ANDROID_3.4.5/drivers/bcma/README new file mode 100644 index 00000000..f7e7ce46 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/README @@ -0,0 +1,19 @@ +Broadcom introduced new bus as replacement for older SSB. It is based on AMBA, +however from programming point of view there is nothing AMBA specific we use. + +Standard AMBA drivers are platform specific, have hardcoded addresses and use +AMBA standard fields like CID and PID. + +In case of Broadcom's cards every device consists of: +1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated + as standard AMBA device. Reading it's CID or PID can cause machine lockup. +2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID) + and PIDs (0x103BB369), but we do not use that info for anything. One of that + devices is used for managing Broadcom specific core. + +Addresses of AMBA devices are not hardcoded in driver and have to be read from +EPROM. + +In this situation we decided to introduce separated bus. It can contain up to +16 devices identified by Broadcom specific fields: manufacturer, id, revision +and class. diff --git a/ANDROID_3.4.5/drivers/bcma/TODO b/ANDROID_3.4.5/drivers/bcma/TODO new file mode 100644 index 00000000..da7aa99f --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/TODO @@ -0,0 +1,3 @@ +- Interrupts +- Defines for PCI core driver +- Create kernel Documentation (use info from README) diff --git a/ANDROID_3.4.5/drivers/bcma/bcma_private.h b/ANDROID_3.4.5/drivers/bcma/bcma_private.h new file mode 100644 index 00000000..b81755bb --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/bcma_private.h @@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + +#ifndef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#endif + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> + +#define BCMA_CORE_SIZE 0x1000 + +struct bcma_bus; + +/* main.c */ +int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM +int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); +int __init bcma_bus_scan_early(struct bcma_bus *bus, + struct bcma_device_id *match, + struct bcma_device *core); +void bcma_init_bus(struct bcma_bus *bus); + +/* sprom.c */ +int bcma_sprom_get(struct bcma_bus *bus); + +/* driver_chipcommon.c */ +#ifdef CONFIG_BCMA_DRIVER_MIPS +void bcma_chipco_serial_init(struct bcma_drv_cc *cc); +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + +/* driver_chipcommon_pmu.c */ +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); +u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); + +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + +/* driver_pci.c */ +u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); +void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif diff --git a/ANDROID_3.4.5/drivers/bcma/core.c b/ANDROID_3.4.5/drivers/bcma/core.c new file mode 100644 index 00000000..893f6e0c --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/core.c @@ -0,0 +1,127 @@ +/* + * Broadcom specific AMBA + * Core ops + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/export.h> +#include <linux/bcma/bcma.h> + +bool bcma_core_is_enabled(struct bcma_device *core) +{ + if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) + != BCMA_IOCTL_CLK) + return false; + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return false; + return true; +} +EXPORT_SYMBOL_GPL(bcma_core_is_enabled); + +void bcma_core_disable(struct bcma_device *core, u32 flags) +{ + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return; + + bcma_awrite32(core, BCMA_IOCTL, flags); + bcma_aread32(core, BCMA_IOCTL); + udelay(10); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + udelay(1); +} +EXPORT_SYMBOL_GPL(bcma_core_disable); + +int bcma_core_enable(struct bcma_device *core, u32 flags) +{ + bcma_core_disable(core, flags); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags)); + bcma_aread32(core, BCMA_IOCTL); + + bcma_awrite32(core, BCMA_RESET_CTL, 0); + udelay(1); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); + bcma_aread32(core, BCMA_IOCTL); + udelay(1); + + return 0; +} +EXPORT_SYMBOL_GPL(bcma_core_enable); + +void bcma_core_set_clockmode(struct bcma_device *core, + enum bcma_clkmode clkmode) +{ + u16 i; + + WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON && + core->id.id != BCMA_CORE_PCIE && + core->id.id != BCMA_CORE_80211); + + switch (clkmode) { + case BCMA_CLKMODE_FAST: + bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); + udelay(64); + for (i = 0; i < 1500; i++) { + if (bcma_read32(core, BCMA_CLKCTLST) & + BCMA_CLKCTLST_HAVEHT) { + i = 0; + break; + } + udelay(10); + } + if (i) + pr_err("HT force timeout\n"); + break; + case BCMA_CLKMODE_DYNAMIC: + pr_warn("Dynamic clockmode not supported yet!\n"); + break; + } +} +EXPORT_SYMBOL_GPL(bcma_core_set_clockmode); + +void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on) +{ + u16 i; + + WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ); + WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST); + + if (on) { + bcma_set32(core, BCMA_CLKCTLST, req); + for (i = 0; i < 10000; i++) { + if ((bcma_read32(core, BCMA_CLKCTLST) & status) == + status) { + i = 0; + break; + } + udelay(10); + } + if (i) + pr_err("PLL enable timeout\n"); + } else { + pr_warn("Disabling PLL not supported yet!\n"); + } +} +EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); + +u32 bcma_core_dma_translation(struct bcma_device *core) +{ + switch (core->bus->hosttype) { + case BCMA_HOSTTYPE_SOC: + return 0; + case BCMA_HOSTTYPE_PCI: + if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64) + return BCMA_DMA_TRANSLATION_DMA64_CMT; + else + return BCMA_DMA_TRANSLATION_DMA32_CMT; + default: + pr_err("DMA translation unknown for host %d\n", + core->bus->hosttype); + } + return BCMA_DMA_TRANSLATION_NONE; +} +EXPORT_SYMBOL(bcma_core_dma_translation); diff --git a/ANDROID_3.4.5/drivers/bcma/driver_chipcommon.c b/ANDROID_3.4.5/drivers/bcma/driver_chipcommon.c new file mode 100644 index 00000000..e9f1b3fd --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/driver_chipcommon.c @@ -0,0 +1,157 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/export.h> +#include <linux/bcma/bcma.h> + +static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, + u32 mask, u32 value) +{ + value &= mask; + value |= bcma_cc_read32(cc, offset) & ~mask; + bcma_cc_write32(cc, offset, value); + + return value; +} + +void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) +{ + u32 leddc_on = 10; + u32 leddc_off = 90; + + if (cc->setup_done) + return; + + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); + if (cc->core->id.rev >= 35) + cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT); + + if (cc->core->id.rev >= 20) { + bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0); + bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0); + } + + if (cc->capabilities & BCMA_CC_CAP_PMU) + bcma_pmu_init(cc); + if (cc->capabilities & BCMA_CC_CAP_PCTL) + pr_err("Power control not implemented!\n"); + + if (cc->core->id.rev >= 16) { + if (cc->core->bus->sprom.leddc_on_time && + cc->core->bus->sprom.leddc_off_time) { + leddc_on = cc->core->bus->sprom.leddc_on_time; + leddc_off = cc->core->bus->sprom.leddc_off_time; + } + bcma_cc_write32(cc, BCMA_CC_GPIOTIMER, + ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | + (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); + } + + cc->setup_done = true; +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks) +{ + /* instant NMI */ + bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks); +} + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value); +} + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask) +{ + return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask; +} + +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask) +{ + return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask; +} + +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); +} + +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); +} + +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value); +} +EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control); + +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); +} + +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} + +#ifdef CONFIG_BCMA_DRIVER_MIPS +void bcma_chipco_serial_init(struct bcma_drv_cc *cc) +{ + unsigned int irq; + u32 baud_base; + u32 i; + unsigned int ccrev = cc->core->id.rev; + struct bcma_serial_port *ports = cc->serial_ports; + + if (ccrev >= 11 && ccrev != 15) { + /* Fixed ALP clock */ + baud_base = bcma_pmu_alp_clock(cc); + if (ccrev >= 21) { + /* Turn off UART clock before switching clocksource. */ + bcma_cc_write32(cc, BCMA_CC_CORECTL, + bcma_cc_read32(cc, BCMA_CC_CORECTL) + & ~BCMA_CC_CORECTL_UARTCLKEN); + } + /* Set the override bit so we don't divide it */ + bcma_cc_write32(cc, BCMA_CC_CORECTL, + bcma_cc_read32(cc, BCMA_CC_CORECTL) + | BCMA_CC_CORECTL_UARTCLK0); + if (ccrev >= 21) { + /* Re-enable the UART clock. */ + bcma_cc_write32(cc, BCMA_CC_CORECTL, + bcma_cc_read32(cc, BCMA_CC_CORECTL) + | BCMA_CC_CORECTL_UARTCLKEN); + } + } else { + pr_err("serial not supported on this device ccrev: 0x%x\n", + ccrev); + return; + } + + irq = bcma_core_mips_irq(cc->core); + + /* Determine the registers of the UARTs */ + cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); + for (i = 0; i < cc->nr_serial_ports; i++) { + ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA + + (i * 256); + ports[i].irq = irq; + ports[i].baud_base = baud_base; + ports[i].reg_shift = 0; + } +} +#endif /* CONFIG_BCMA_DRIVER_MIPS */ diff --git a/ANDROID_3.4.5/drivers/bcma/driver_chipcommon_pmu.c b/ANDROID_3.4.5/drivers/bcma/driver_chipcommon_pmu.c new file mode 100644 index 00000000..61ce4054 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/driver_chipcommon_pmu.c @@ -0,0 +1,313 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * + * Copyright 2009, Michael Buesch <m@bues.ch> + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/export.h> +#include <linux/bcma/bcma.h> + +static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset) +{ + bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); + return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA); +} + +void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) +{ + bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); + bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value); +} +EXPORT_SYMBOL_GPL(bcma_chipco_pll_write); + +void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, + u32 set) +{ + bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR); + bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set); +} +EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset); + +void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set) +{ + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); + bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set); +} +EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset); + +void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, + u32 set) +{ + bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR); + bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set); +} +EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + case 0x4331: + case 43224: + case 43225: + break; + default: + pr_err("PLL init unknown for device 0x%04X\n", + bus->chipinfo.id); + } +} + +static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + u32 min_msk = 0, max_msk = 0; + + switch (bus->chipinfo.id) { + case 0x4313: + min_msk = 0x200D; + max_msk = 0xFFFF; + break; + case 0x4331: + case 43224: + case 43225: + break; + default: + pr_err("PMU resource config unknown for device 0x%04X\n", + bus->chipinfo.id); + } + + /* Set the resource masks. */ + if (min_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); + if (max_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); +} + +void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + case 0x4331: + case 43224: + case 43225: + break; + default: + pr_err("PMU switch/regulators init unknown for device " + "0x%04X\n", bus->chipinfo.id); + } +} + +/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */ +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable) +{ + struct bcma_bus *bus = cc->core->bus; + u32 val; + + val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL); + if (enable) { + val |= BCMA_CHIPCTL_4331_EXTPA_EN; + if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11) + val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; + } else { + val &= ~BCMA_CHIPCTL_4331_EXTPA_EN; + val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5; + } + bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val); +} + +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: + case 43431: + /* Ext PA lines must be enabled for tx on BCM4331 */ + bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true); + break; + case 43224: + if (bus->chipinfo.rev == 0) { + pr_err("Workarounds for 43224 rev 0 not fully " + "implemented\n"); + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0); + } else { + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + } + break; + case 43225: + break; + default: + pr_err("Workarounds unknown for device 0x%04X\n", + bus->chipinfo.id); + } +} + +void bcma_pmu_init(struct bcma_drv_cc *cc) +{ + u32 pmucap; + + pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); + cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); + + pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, + pmucap); + + if (cc->pmu.rev == 1) + bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, + ~BCMA_CC_PMU_CTL_NOILPONW); + else + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, + BCMA_CC_PMU_CTL_NOILPONW); + + if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2) + pr_err("Fix for 4329b0 bad LPOM state not implemented!\n"); + + bcma_pmu_pll_init(cc); + bcma_pmu_resources_init(cc); + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} + +u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4716: + case 0x4748: + case 47162: + case 0x4313: + case 0x5357: + case 0x4749: + case 53572: + /* always 20Mhz */ + return 20000 * 1000; + case 0x5356: + case 0x5300: + /* always 25Mhz */ + return 25000 * 1000; + default: + pr_warn("No ALP clock specified for %04X device, " + "pmu rev. %d, using default %d Hz\n", + bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK); + } + return BCMA_CC_PMU_ALP_CLOCK; +} + +/* Find the output of the "m" pll divider given pll controls that start with + * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc. + */ +static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m) +{ + u32 tmp, div, ndiv, p1, p2, fc; + struct bcma_bus *bus = cc->core->bus; + + BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0)); + + BUG_ON(!m || m > 4); + + if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) { + /* Detect failure in clock setting */ + tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + if (tmp & 0x40000) + return 133 * 1000000; + } + + tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF); + p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT; + p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT; + + tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF); + div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) & + BCMA_CC_PPL_MDIV_MASK; + + tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF); + ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT; + + /* Do calculation in Mhz */ + fc = bcma_pmu_alp_clock(cc) / 1000000; + fc = (p1 * ndiv * fc) / p2; + + /* Return clock in Hertz */ + return (fc / div) * 1000000; +} + +/* query bus clock frequency for PMU-enabled chipcommon */ +u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4716: + case 0x4748: + case 47162: + return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 0x5356: + return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 0x5357: + case 0x4749: + return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 0x5300: + return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0, + BCMA_CC_PMU5_MAINPLL_SSB); + case 53572: + return 75000000; + default: + pr_warn("No backplane clock specified for %04X device, " + "pmu rev. %d, using default %d Hz\n", + bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK); + } + return BCMA_CC_PMU_HT_CLOCK; +} + +/* query cpu clock frequency for PMU-enabled chipcommon */ +u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + if (bus->chipinfo.id == 53572) + return 300000000; + + if (cc->pmu.rev >= 5) { + u32 pll; + switch (bus->chipinfo.id) { + case 0x5356: + pll = BCMA_CC_PMU5356_MAINPLL_PLL0; + break; + case 0x5357: + case 0x4749: + pll = BCMA_CC_PMU5357_MAINPLL_PLL0; + break; + default: + pll = BCMA_CC_PMU4716_MAINPLL_PLL0; + break; + } + + /* TODO: if (bus->chipinfo.id == 0x5300) + return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */ + return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU); + } + + return bcma_pmu_get_clockcontrol(cc); +} diff --git a/ANDROID_3.4.5/drivers/bcma/driver_mips.c b/ANDROID_3.4.5/drivers/bcma/driver_mips.c new file mode 100644 index 00000000..c3e9dff4 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ +/* + * Broadcom specific AMBA + * Broadcom MIPS32 74K core driver + * + * Copyright 2009, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> + * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> + * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" + +#include <linux/bcma/bcma.h> + +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <linux/time.h> + +/* The 47162a0 hangs when reading MIPS DMP registers registers */ +static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) +{ + return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && + dev->id.id == BCMA_CORE_MIPS_74K; +} + +/* The 5357b0 hangs when reading USB20H DMP registers */ +static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) +{ + return (dev->bus->chipinfo.id == 0x5357 || + dev->bus->chipinfo.id == 0x4749) && + dev->bus->chipinfo.pkg == 11 && + dev->id.id == BCMA_CORE_USB20_HOST; +} + +static inline u32 mips_read32(struct bcma_drv_mips *mcore, + u16 offset) +{ + return bcma_read32(mcore->core, offset); +} + +static inline void mips_write32(struct bcma_drv_mips *mcore, + u16 offset, + u32 value) +{ + bcma_write32(mcore->core, offset, value); +} + +static const u32 ipsflag_irq_mask[] = { + 0, + BCMA_MIPS_IPSFLAG_IRQ1, + BCMA_MIPS_IPSFLAG_IRQ2, + BCMA_MIPS_IPSFLAG_IRQ3, + BCMA_MIPS_IPSFLAG_IRQ4, +}; + +static const u32 ipsflag_irq_shift[] = { + 0, + BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, + BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, + BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, + BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, +}; + +static u32 bcma_core_mips_irqflag(struct bcma_device *dev) +{ + u32 flag; + + if (bcma_core_mips_bcm47162a0_quirk(dev)) + return dev->core_index; + if (bcma_core_mips_bcm5357b0_quirk(dev)) + return dev->core_index; + flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); + + return flag & 0x1F; +} + +/* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. + */ +unsigned int bcma_core_mips_irq(struct bcma_device *dev) +{ + struct bcma_device *mdev = dev->bus->drv_mips.core; + u32 irqflag; + unsigned int irq; + + irqflag = bcma_core_mips_irqflag(dev); + + for (irq = 1; irq <= 4; irq++) + if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & + (1 << irqflag)) + return irq; + + return 0; +} +EXPORT_SYMBOL(bcma_core_mips_irq); + +static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) +{ + unsigned int oldirq = bcma_core_mips_irq(dev); + struct bcma_bus *bus = dev->bus; + struct bcma_device *mdev = bus->drv_mips.core; + u32 irqflag; + + irqflag = bcma_core_mips_irqflag(dev); + BUG_ON(oldirq == 6); + + dev->irq = irq + 2; + + /* clear the old irq */ + if (oldirq == 0) + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), + bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & + ~(1 << irqflag)); + else + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); + + /* assign the new one */ + if (irq == 0) { + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), + bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | + (1 << irqflag)); + } else { + u32 oldirqflag = bcma_read32(mdev, + BCMA_MIPS_MIPS74K_INTMASK(irq)); + if (oldirqflag) { + struct bcma_device *core; + + /* backplane irq line is in use, find out who uses + * it and set user to irq 0 + */ + list_for_each_entry_reverse(core, &bus->cores, list) { + if ((1 << bcma_core_mips_irqflag(core)) == + oldirqflag) { + bcma_core_mips_set_irq(core, 0); + break; + } + } + } + bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), + 1 << irqflag); + } + + pr_info("set_irq: core 0x%04x, irq %d => %d\n", + dev->id.id, oldirq + 2, irq + 2); +} + +static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) +{ + int i; + static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; + printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); + for (i = 0; i <= 6; i++) + printk(" %s%s", irq_name[i], i == irq ? "*" : " "); + printk("\n"); +} + +static void bcma_core_mips_dump_irq(struct bcma_bus *bus) +{ + struct bcma_device *core; + + list_for_each_entry_reverse(core, &bus->cores, list) { + bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); + } +} + +u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus = mcore->core->bus; + + if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) + return bcma_pmu_get_clockcpu(&bus->drv_cc); + + pr_err("No PMU available, need this to get the cpu clock\n"); + return 0; +} +EXPORT_SYMBOL(bcma_cpu_clock); + +static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus = mcore->core->bus; + + switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { + case BCMA_CC_FLASHT_STSER: + case BCMA_CC_FLASHT_ATSER: + pr_err("Serial flash not supported.\n"); + break; + case BCMA_CC_FLASHT_PARA: + pr_info("found parallel flash.\n"); + bus->drv_cc.pflash.window = 0x1c000000; + bus->drv_cc.pflash.window_size = 0x02000000; + + if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & + BCMA_CC_FLASH_CFG_DS) == 0) + bus->drv_cc.pflash.buswidth = 1; + else + bus->drv_cc.pflash.buswidth = 2; + break; + default: + pr_err("flash not supported.\n"); + } +} + +void bcma_core_mips_init(struct bcma_drv_mips *mcore) +{ + struct bcma_bus *bus; + struct bcma_device *core; + bus = mcore->core->bus; + + pr_info("Initializing MIPS core...\n"); + + if (!mcore->setup_done) + mcore->assigned_irqs = 1; + + /* Assign IRQs to all cores on the bus */ + list_for_each_entry_reverse(core, &bus->cores, list) { + int mips_irq; + if (core->irq) + continue; + + mips_irq = bcma_core_mips_irq(core); + if (mips_irq > 4) + core->irq = 0; + else + core->irq = mips_irq + 2; + if (core->irq > 5) + continue; + switch (core->id.id) { + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: + case BCMA_CORE_ETHERNET: + case BCMA_CORE_ETHERNET_GBIT: + case BCMA_CORE_MAC_GBIT: + case BCMA_CORE_80211: + case BCMA_CORE_USB20_HOST: + /* These devices get their own IRQ line if available, + * the rest goes on IRQ0 + */ + if (mcore->assigned_irqs <= 4) + bcma_core_mips_set_irq(core, + mcore->assigned_irqs++); + break; + } + } + pr_info("IRQ reconfiguration done\n"); + bcma_core_mips_dump_irq(bus); + + if (mcore->setup_done) + return; + + bcma_chipco_serial_init(&bus->drv_cc); + bcma_core_mips_flash_detect(mcore); + mcore->setup_done = true; +} diff --git a/ANDROID_3.4.5/drivers/bcma/driver_pci.c b/ANDROID_3.4.5/drivers/bcma/driver_pci.c new file mode 100644 index 00000000..4d38ae17 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/driver_pci.c @@ -0,0 +1,226 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/export.h> +#include <linux/bcma/bcma.h> + +/************************************************** + * R/W ops. + **************************************************/ + +u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ + u32 v; + int i; + + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_WRITE; + v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << + BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +} + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + + /* enable mdio access to SERDES */ + v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; + v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); + v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + } else { + v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_READ; + v |= BCMA_CORE_PCI_MDIODATA_TA; + + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); + ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ + int max_retries = 10; + u32 v; + int i; + + /* enable mdio access to SERDES */ + v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; + v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); + v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << + BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); + } else { + v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); + v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + + v = BCMA_CORE_PCI_MDIODATA_START; + v |= BCMA_CORE_PCI_MDIODATA_WRITE; + v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); + if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } + pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** + * Workarounds. + **************************************************/ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ + u32 tmp; + + tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); + if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) + return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | + BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; + else + return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ + u16 tmp; + + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, + BCMA_CORE_PCI_SERDES_RX_CTRL, + bcma_pcicore_polarity_workaround(pc)); + tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL); + if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL, + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + +static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + +void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + pc->hostmode = bcma_core_pci_is_in_hostmode(pc); + if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + + if (!pc->hostmode) + bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, + bool enable) +{ + struct pci_dev *pdev = pc->core->bus->host_pci; + u32 coremask, tmp; + int err = 0; + + if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) { + /* This bcma device is not on a PCI host-bus. So the IRQs are + * not routed through the PCI core. + * So we must not enable routing through the PCI core. */ + goto out; + } + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) + goto out; + + coremask = BIT(core->core_index) << 8; + if (enable) + tmp |= coremask; + else + tmp &= ~coremask; + + err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); + +out: + return err; +} +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); diff --git a/ANDROID_3.4.5/drivers/bcma/driver_pci_host.c b/ANDROID_3.4.5/drivers/bcma/driver_pci_host.c new file mode 100644 index 00000000..d2097a11 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/driver_pci_host.c @@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * + * Copyright 2005 - 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/pci.h> +#include <linux/export.h> +#include <linux/bcma/bcma.h> +#include <asm/paccess.h> + +/* Probe a 32bit value on the bus and catch bus exceptions. + * Returns nonzero on a bus exception. + * This is MIPS specific */ +#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) + +/* Assume one-hot slot wiring */ +#define BCMA_PCI_SLOT_MAX 16 +#define PCI_CONFIG_SPACE_SIZE 256 + +bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +{ + struct bcma_bus *bus = pc->core->bus; + u16 chipid_top; + u32 tmp; + + chipid_top = (bus->chipinfo.id & 0xFF00); + if (chipid_top != 0x4700 && + chipid_top != 0x5300) + return false; + + if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { + pr_info("This PCI core is disabled and not working\n"); + return false; + } + + bcma_core_enable(pc->core, 0); + + return !mips_busprobe32(tmp, pc->core->io_addr); +} + +static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) +{ + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); + return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); +} + +static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, + u32 data) +{ + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); +} + +static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off) +{ + u32 addr = 0; + + /* Issue config commands only when the data link is up (atleast + * one external pcie device is present). + */ + if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) + & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) + goto out; + + /* Type 0 transaction */ + /* Slide the PCI window to the appropriate slot */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); + /* Calculate the address */ + addr = pc->host_controller->host_cfg_addr; + addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); + addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); + addr |= (off & ~3); + +out: + return addr; +} + +static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off, + void *buf, int len) +{ + int err = -EINVAL; + u32 addr, val; + void __iomem *mmio = 0; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) + return -EINVAL; + + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFF); + val = bcma_pcie_read_config(pc, addr); + } else { + addr = BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); + val = pcicore_read32(pc, addr); + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + val = readl(mmio); + } + val >>= (8 * (off & 3)); + + switch (len) { + case 1: + *((u8 *)buf) = (u8)val; + break; + case 2: + *((u16 *)buf) = (u16)val; + break; + case 4: + *((u32 *)buf) = (u32)val; + break; + } + err = 0; +unmap: + if (mmio) + iounmap(mmio); +out: + return err; +} + +static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, + unsigned int func, unsigned int off, + const void *buf, int len) +{ + int err = -EINVAL; + u32 addr = 0, val = 0; + void __iomem *mmio = 0; + u16 chipid = pc->core->bus->chipinfo.id; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + if (dev == 0) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + if (off < PCI_CONFIG_SPACE_SIZE) { + addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + } + } else { + addr = bcma_get_cfgspace_addr(pc, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + } + + switch (len) { + case 1: + val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: + val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; + case 4: + val = *((const u32 *)buf); + break; + } + if (dev == 0 && !addr) { + /* accesses to config registers with offsets >= 256 + * requires indirect access. + */ + addr = (func << 12); + addr |= (off & 0x0FFF); + bcma_pcie_write_config(pc, addr, val); + } else { + writel(val, mmio); + + if (chipid == 0x4716 || chipid == 0x4748) + readl(mmio); + } + + err = 0; +unmap: + if (mmio) + iounmap(mmio); +out: + return err; +} + +static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, + unsigned int devfn, + int reg, int size, u32 *val) +{ + unsigned long flags; + int err; + struct bcma_drv_pci *pc; + struct bcma_drv_pci_host *pc_host; + + pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); + pc = pc_host->pdev; + + spin_lock_irqsave(&pc_host->cfgspace_lock, flags); + err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, val, size); + spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, + unsigned int devfn, + int reg, int size, u32 val) +{ + unsigned long flags; + int err; + struct bcma_drv_pci *pc; + struct bcma_drv_pci_host *pc_host; + + pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); + pc = pc_host->pdev; + + spin_lock_irqsave(&pc_host->cfgspace_lock, flags); + err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, &val, size); + spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +/* return cap_offset if requested capability exists in the PCI config space */ +static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, + unsigned int dev, + unsigned int func, u8 req_cap_id, + unsigned char *buf, u32 *buflen) +{ + u8 cap_id; + u8 cap_ptr = 0; + u32 bufsize; + u8 byte_val; + + /* check for Header type 0 */ + bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, + sizeof(u8)); + if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) + return cap_ptr; + + /* check if the capability pointer field exists */ + bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, + sizeof(u8)); + if (!(byte_val & PCI_STATUS_CAP_LIST)) + return cap_ptr; + + /* check if the capability pointer is 0x00 */ + bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, + sizeof(u8)); + if (cap_ptr == 0x00) + return cap_ptr; + + /* loop thr'u the capability list and see if the requested capabilty + * exists */ + bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); + while (cap_id != req_cap_id) { + bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, + sizeof(u8)); + if (cap_ptr == 0x00) + return cap_ptr; + bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, + sizeof(u8)); + } + + /* found the caller requested capability */ + if ((buf != NULL) && (buflen != NULL)) { + u8 cap_data; + + bufsize = *buflen; + if (!bufsize) + return cap_ptr; + + *buflen = 0; + + /* copy the cpability data excluding cap ID and next ptr */ + cap_data = cap_ptr + 2; + if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) + bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; + *buflen = bufsize; + while (bufsize--) { + bcma_extpci_read_config(pc, dev, func, cap_data, buf, + sizeof(u8)); + cap_data++; + buf++; + } + } + + return cap_ptr; +} + +/* If the root port is capable of returning Config Request + * Retry Status (CRS) Completion Status to software then + * enable the feature. + */ +static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) +{ + u8 cap_ptr, root_ctrl, root_cap, dev; + u16 val16; + int i; + + cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, + NULL); + root_cap = cap_ptr + PCI_EXP_RTCAP; + bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); + if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { + /* Enable CRS software visibility */ + root_ctrl = cap_ptr + PCI_EXP_RTCTL; + val16 = PCI_EXP_RTCTL_CRSSVE; + bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, + sizeof(u16)); + + /* Initiate a configuration request to read the vendor id + * field of the device function's config space header after + * 100 ms wait time from the end of Reset. If the device is + * not done with its internal initialization, it must at + * least return a completion TLP, with a completion status + * of "Configuration Request Retry Status (CRS)". The root + * complex must complete the request to the host by returning + * a read-data value of 0001h for the Vendor ID field and + * all 1s for any additional bytes included in the request. + * Poll using the config reads for max wait time of 1 sec or + * until we receive the successful completion status. Repeat + * the procedure for all the devices. + */ + for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { + for (i = 0; i < 100000; i++) { + bcma_extpci_read_config(pc, dev, 0, + PCI_VENDOR_ID, &val16, + sizeof(val16)); + if (val16 != 0x1) + break; + udelay(10); + } + if (val16 == 0x1) + pr_err("PCI: Broken device in slot %d\n", dev); + } + } +} + +void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) +{ + struct bcma_bus *bus = pc->core->bus; + struct bcma_drv_pci_host *pc_host; + u32 tmp; + u32 pci_membase_1G; + unsigned long io_map_base; + + pr_info("PCIEcore in host mode found\n"); + + pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); + if (!pc_host) { + pr_err("can not allocate memory"); + return; + } + + pc->host_controller = pc_host; + pc_host->pci_controller.io_resource = &pc_host->io_resource; + pc_host->pci_controller.mem_resource = &pc_host->mem_resource; + pc_host->pci_controller.pci_ops = &pc_host->pci_ops; + pc_host->pdev = pc; + + pci_membase_1G = BCMA_SOC_PCI_DMA; + pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; + + pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; + pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; + + pc_host->mem_resource.name = "BCMA PCIcore external memory", + pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; + pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; + pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; + + pc_host->io_resource.name = "BCMA PCIcore external I/O", + pc_host->io_resource.start = 0x100; + pc_host->io_resource.end = 0x7FF; + pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; + + /* Reset RC */ + udelay(3000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); + udelay(1000); + pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | + BCMA_CORE_PCI_CTL_RST_OE); + + /* 64 MB I/O access window. On 4716, use + * sbtopcie0 to access the device registers. We + * can't use address match 2 (1 GB window) region + * as mips can't generate 64-bit address on the + * backplane. + */ + if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); + } else if (bus->chipinfo.id == 0x5300) { + tmp = BCMA_CORE_PCI_SBTOPCI_MEM; + tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; + tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; + if (pc->core->core_unit == 0) { + pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI_MEM); + } else if (pc->core->core_unit == 1) { + pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; + pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + + BCMA_SOC_PCI_MEM_SZ - 1; + pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; + pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + tmp | BCMA_SOC_PCI1_MEM); + } + } else + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, + BCMA_CORE_PCI_SBTOPCI_IO); + + /* 64 MB configuration access window */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); + + /* 1 GB memory access window */ + pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, + BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); + + + /* As per PCI Express Base Spec 1.1 we need to wait for + * at least 100 ms from the end of a reset (cold/warm/hot) + * before issuing configuration requests to PCI Express + * devices. + */ + udelay(100000); + + bcma_core_pci_enable_crs(pc); + + /* Enable PCI bridge BAR0 memory & master access */ + tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); + + /* Enable PCI interrupts */ + pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); + + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ + io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, + 0x04000000); + pc_host->pci_controller.io_map_base = io_map_base; + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ + mdelay(10); + register_pci_controller(&pc_host->pci_controller); + return; +} + +/* Early PCI fixup for a device on the PCI-core bridge. */ +static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) +{ + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (PCI_SLOT(dev->devfn) != 0) + return; + + pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { + pr_err("PCI: BCMA bridge enable failed\n"); + return; + } + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); + +/* Early PCI fixup for all PCI-cores to set the correct memory address. */ +static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) +{ + struct resource *res; + int pos; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (PCI_SLOT(dev->devfn) == 0) + return; + + pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); + + for (pos = 0; pos < 6; pos++) { + res = &dev->resource[pos]; + if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) + pci_assign_resource(dev, pos); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); + +/* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ +int bcma_core_pci_plat_dev_init(struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); + + pr_info("PCI: Fixing up device %s\n", pci_name(dev)); + + /* Fix up interrupt lines */ + dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + + return 0; +} +EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); + +/* PCI device IRQ mapping. */ +int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) +{ + struct bcma_drv_pci_host *pc_host; + + if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + + pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, + pci_ops); + return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} +EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); diff --git a/ANDROID_3.4.5/drivers/bcma/host_pci.c b/ANDROID_3.4.5/drivers/bcma/host_pci.c new file mode 100644 index 00000000..e3928d68 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/host_pci.c @@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/slab.h> +#include <linux/bcma/bcma.h> +#include <linux/pci.h> +#include <linux/module.h> + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, + core->addr); + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, + core->wrap); + core->bus->mapped_core = core; + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + +/* Provides access to the requested core. Returns base offset that has to be + * used. It makes use of fixed windows when possible. */ +static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) +{ + switch (core->id.id) { + case BCMA_CORE_CHIPCOMMON: + return 3 * BCMA_CORE_SIZE; + case BCMA_CORE_PCIE: + return 2 * BCMA_CORE_SIZE; + } + + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return 0; +} + +static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +{ + offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ + offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ + offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ + offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ + offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ + offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); +} + +#ifdef CONFIG_BCMA_BLOCKIO +void bcma_host_pci_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + ioread8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + ioread16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + ioread32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} + +void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->bus->mmio + offset; + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + switch (reg_width) { + case sizeof(u8): + iowrite8_rep(addr, buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + iowrite16_rep(addr, buffer, count >> 1); + break; + case sizeof(u32): + WARN_ON(count & 3); + iowrite32_rep(addr, buffer, count >> 2); + break; + default: + WARN_ON(1); + } +} +#endif + +static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset, + u32 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +const struct bcma_host_ops bcma_host_pci_ops = { + .read8 = bcma_host_pci_read8, + .read16 = bcma_host_pci_read16, + .read32 = bcma_host_pci_read32, + .write8 = bcma_host_pci_write8, + .write16 = bcma_host_pci_write16, + .write32 = bcma_host_pci_write32, +#ifdef CONFIG_BCMA_BLOCKIO + .block_read = bcma_host_pci_block_read, + .block_write = bcma_host_pci_block_write, +#endif + .aread32 = bcma_host_pci_aread32, + .awrite32 = bcma_host_pci_awrite32, +}; + +static int __devinit bcma_host_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; + const char *name; + u32 val; + + /* Alloc */ + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) + goto out; + + /* Basic PCI configuration */ + err = pci_enable_device(dev); + if (err) + goto err_kfree_bus; + + name = dev_name(&dev->dev); + if (dev->driver && dev->driver->name) + name = dev->driver->name; + err = pci_request_regions(dev, name); + if (err) + goto err_pci_disable; + pci_set_master(dev); + + /* Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(dev, 0x40, val & 0xffff00ff); + + /* SSB needed additional powering up, do we have any AMBA PCI cards? */ + if (!pci_is_pcie(dev)) + pr_err("PCI card detected, report problems.\n"); + + /* Map MMIO */ + err = -ENOMEM; + bus->mmio = pci_iomap(dev, 0, ~0UL); + if (!bus->mmio) + goto err_pci_release_regions; + + /* Host specific */ + bus->host_pci = dev; + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + + /* Register */ + err = bcma_bus_register(bus); + if (err) + goto err_pci_unmap_mmio; + + pci_set_drvdata(dev, bus); + +out: + return err; + +err_pci_unmap_mmio: + pci_iounmap(dev, bus->mmio); +err_pci_release_regions: + pci_release_regions(dev); +err_pci_disable: + pci_disable_device(dev); +err_kfree_bus: + kfree(bus); + return err; +} + +static void bcma_host_pci_remove(struct pci_dev *dev) +{ + struct bcma_bus *bus = pci_get_drvdata(dev); + + bcma_bus_unregister(bus); + pci_iounmap(dev, bus->mmio); + pci_release_regions(dev); + pci_disable_device(dev); + kfree(bus); + pci_set_drvdata(dev, NULL); +} + +#ifdef CONFIG_PM +static int bcma_host_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct bcma_bus *bus = pci_get_drvdata(pdev); + + bus->mapped_core = NULL; + + return bcma_bus_suspend(bus); +} + +static int bcma_host_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct bcma_bus *bus = pci_get_drvdata(pdev); + + return bcma_bus_resume(bus); +} + +static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, + bcma_host_pci_resume); +#define BCMA_PM_OPS (&bcma_pm_ops) + +#else /* CONFIG_PM */ + +#define BCMA_PM_OPS NULL + +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); + +static struct pci_driver bcma_pci_bridge_driver = { + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, + .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) +{ + return pci_register_driver(&bcma_pci_bridge_driver); +} + +void __exit bcma_host_pci_exit(void) +{ + pci_unregister_driver(&bcma_pci_bridge_driver); +} diff --git a/ANDROID_3.4.5/drivers/bcma/host_soc.c b/ANDROID_3.4.5/drivers/bcma/host_soc.c new file mode 100644 index 00000000..3c381fb8 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/host_soc.c @@ -0,0 +1,183 @@ +/* + * Broadcom specific AMBA + * System on Chip (SoC) Host + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include "scan.h" +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_soc.h> + +static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) +{ + return readb(core->io_addr + offset); +} + +static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) +{ + return readw(core->io_addr + offset); +} + +static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) +{ + return readl(core->io_addr + offset); +} + +static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, + u8 value) +{ + writeb(value, core->io_addr + offset); +} + +static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, + u16 value) +{ + writew(value, core->io_addr + offset); +} + +static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, + u32 value) +{ + writel(value, core->io_addr + offset); +} + +#ifdef CONFIG_BCMA_BLOCKIO +static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->io_addr + offset; + + switch (reg_width) { + case sizeof(u8): { + u8 *buf = buffer; + + while (count) { + *buf = __raw_readb(addr); + buf++; + count--; + } + break; + } + case sizeof(u16): { + __le16 *buf = buffer; + + WARN_ON(count & 1); + while (count) { + *buf = (__force __le16)__raw_readw(addr); + buf++; + count -= 2; + } + break; + } + case sizeof(u32): { + __le32 *buf = buffer; + + WARN_ON(count & 3); + while (count) { + *buf = (__force __le32)__raw_readl(addr); + buf++; + count -= 4; + } + break; + } + default: + WARN_ON(1); + } +} + +static void bcma_host_soc_block_write(struct bcma_device *core, + const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + void __iomem *addr = core->io_addr + offset; + + switch (reg_width) { + case sizeof(u8): { + const u8 *buf = buffer; + + while (count) { + __raw_writeb(*buf, addr); + buf++; + count--; + } + break; + } + case sizeof(u16): { + const __le16 *buf = buffer; + + WARN_ON(count & 1); + while (count) { + __raw_writew((__force u16)(*buf), addr); + buf++; + count -= 2; + } + break; + } + case sizeof(u32): { + const __le32 *buf = buffer; + + WARN_ON(count & 3); + while (count) { + __raw_writel((__force u32)(*buf), addr); + buf++; + count -= 4; + } + break; + } + default: + WARN_ON(1); + } +} +#endif /* CONFIG_BCMA_BLOCKIO */ + +static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) +{ + return readl(core->io_wrap + offset); +} + +static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, + u32 value) +{ + writel(value, core->io_wrap + offset); +} + +const struct bcma_host_ops bcma_host_soc_ops = { + .read8 = bcma_host_soc_read8, + .read16 = bcma_host_soc_read16, + .read32 = bcma_host_soc_read32, + .write8 = bcma_host_soc_write8, + .write16 = bcma_host_soc_write16, + .write32 = bcma_host_soc_write32, +#ifdef CONFIG_BCMA_BLOCKIO + .block_read = bcma_host_soc_block_read, + .block_write = bcma_host_soc_block_write, +#endif + .aread32 = bcma_host_soc_aread32, + .awrite32 = bcma_host_soc_awrite32, +}; + +int __init bcma_host_soc_register(struct bcma_soc *soc) +{ + struct bcma_bus *bus = &soc->bus; + int err; + + /* iomap only first core. We have to read some register on this core + * to scan the bus. + */ + bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); + if (!bus->mmio) + return -ENOMEM; + + /* Host specific */ + bus->hosttype = BCMA_HOSTTYPE_SOC; + bus->ops = &bcma_host_soc_ops; + + /* Register */ + err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); + if (err) + iounmap(bus->mmio); + + return err; +} diff --git a/ANDROID_3.4.5/drivers/bcma/main.c b/ANDROID_3.4.5/drivers/bcma/main.c new file mode 100644 index 00000000..7e138ec2 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/main.c @@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include <linux/module.h> +#include <linux/bcma/bcma.h> +#include <linux/slab.h> + +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + +/* contains the number the next bus should get. */ +static unsigned int bcma_bus_next_num = 0; + +/* bcma_buses_mutex locks the bcma_bus_next_num */ +static DEFINE_MUTEX(bcma_buses_mutex); + +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); +static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%03X\n", core->id.manuf); +} +static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%03X\n", core->id.id); +} +static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%02X\n", core->id.rev); +} +static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + return sprintf(buf, "0x%X\n", core->id.class); +} +static struct device_attribute bcma_device_attrs[] = { + __ATTR_RO(manuf), + __ATTR_RO(id), + __ATTR_RO(rev), + __ATTR_RO(class), + __ATTR_NULL, +}; + +static struct bus_type bcma_bus_type = { + .name = "bcma", + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, + .uevent = bcma_device_uevent, + .dev_attrs = bcma_device_attrs, +}; + +struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + if (core->id.id == coreid) + return core; + } + return NULL; +} +EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + if (core->io_addr) + iounmap(core->io_addr); + if (core->io_wrap) + iounmap(core->io_wrap); + kfree(core); +} + +static int bcma_register_cores(struct bcma_bus *bus) +{ + struct bcma_device *core; + int err, dev_id = 0; + + list_for_each_entry(core, &bus->cores, list) { + /* We support that cores ourself */ + switch (core->id.id) { + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: + case BCMA_CORE_MIPS_74K: + continue; + } + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; + dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: + core->dev.parent = &bus->host_pci->dev; + core->dma_dev = &bus->host_pci->dev; + core->irq = bus->host_pci->irq; + break; + case BCMA_HOSTTYPE_SOC: + core->dev.dma_mask = &core->dev.coherent_dma_mask; + core->dma_dev = &core->dev; + break; + case BCMA_HOSTTYPE_SDIO: + break; + } + + err = device_register(&core->dev); + if (err) { + pr_err("Could not register dev for core 0x%03X\n", + core->id.id); + continue; + } + core->dev_registered = true; + dev_id++; + } + + return 0; +} + +static void bcma_unregister_cores(struct bcma_bus *bus) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + if (core->dev_registered) + device_unregister(&core->dev); + } +} + +int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + + mutex_lock(&bcma_buses_mutex); + bus->num = bcma_bus_next_num++; + mutex_unlock(&bcma_buses_mutex); + + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { + pr_err("Failed to scan: %d\n", err); + return -1; + } + + /* Init CC core */ + core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); + if (core) { + bus->drv_cc.core = core; + bcma_core_chipcommon_init(&bus->drv_cc); + } + + /* Init MIPS core */ + core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + if (core) { + bus->drv_mips.core = core; + bcma_core_mips_init(&bus->drv_mips); + } + + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { + bus->drv_pci.core = core; + bcma_core_pci_init(&bus->drv_pci); + } + + /* Try to get SPROM */ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); + } else if (err) + pr_err("Failed to get SPROM: %d\n", err); + + /* Register found cores */ + bcma_register_cores(bus); + + pr_info("Bus registered\n"); + + return 0; +} + +void bcma_bus_unregister(struct bcma_bus *bus) +{ + bcma_unregister_cores(bus); +} + +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips) +{ + int err; + struct bcma_device *core; + struct bcma_device_id match; + + bcma_init_bus(bus); + + match.manuf = BCMA_MANUF_BCM; + match.id = BCMA_CORE_CHIPCOMMON; + match.class = BCMA_CL_SIM; + match.rev = BCMA_ANY_REV; + + /* Scan for chip common core */ + err = bcma_bus_scan_early(bus, &match, core_cc); + if (err) { + pr_err("Failed to scan for common core: %d\n", err); + return -1; + } + + match.manuf = BCMA_MANUF_MIPS; + match.id = BCMA_CORE_MIPS_74K; + match.class = BCMA_CL_SIM; + match.rev = BCMA_ANY_REV; + + /* Scan for mips core */ + err = bcma_bus_scan_early(bus, &match, core_mips); + if (err) { + pr_err("Failed to scan for mips core: %d\n", err); + return -1; + } + + /* Init CC core */ + core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); + if (core) { + bus->drv_cc.core = core; + bcma_core_chipcommon_init(&bus->drv_cc); + } + + /* Init MIPS core */ + core = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + if (core) { + bus->drv_mips.core = core; + bcma_core_mips_init(&bus->drv_mips); + } + + pr_info("Early bus registered\n"); + + return 0; +} + +#ifdef CONFIG_PM +int bcma_bus_suspend(struct bcma_bus *bus) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + struct device_driver *drv = core->dev.driver; + if (drv) { + struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); + if (adrv->suspend) + adrv->suspend(core); + } + } + return 0; +} + +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; + + /* Init CC core */ + core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); + if (core) { + bus->drv_cc.setup_done = false; + bcma_core_chipcommon_init(&bus->drv_cc); + } + + list_for_each_entry(core, &bus->cores, list) { + struct device_driver *drv = core->dev.driver; + if (drv) { + struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); + if (adrv->resume) + adrv->resume(core); + } + } + + return 0; +} +#endif + +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; + drv->drv.bus = &bcma_bus_type; + drv->drv.owner = owner; + + return driver_register(&drv->drv); +} +EXPORT_SYMBOL_GPL(__bcma_driver_register); + +void bcma_driver_unregister(struct bcma_driver *drv) +{ + driver_unregister(&drv->drv); +} +EXPORT_SYMBOL_GPL(bcma_driver_unregister); + +static int bcma_bus_match(struct device *dev, struct device_driver *drv) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); + const struct bcma_device_id *cid = &core->id; + const struct bcma_device_id *did; + + for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) { + if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) && + (did->id == cid->id || did->id == BCMA_ANY_ID) && + (did->rev == cid->rev || did->rev == BCMA_ANY_REV) && + (did->class == cid->class || did->class == BCMA_ANY_CLASS)) + return 1; + } + return 0; +} + +static int bcma_device_probe(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, + drv); + int err = 0; + + if (adrv->probe) + err = adrv->probe(core); + + return err; +} + +static int bcma_device_remove(struct device *dev) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, + drv); + + if (adrv->remove) + adrv->remove(core); + + return 0; +} + +static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct bcma_device *core = container_of(dev, struct bcma_device, dev); + + return add_uevent_var(env, + "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X", + core->id.manuf, core->id.id, + core->id.rev, core->id.class); +} + +static int __init bcma_modinit(void) +{ + int err; + + err = bus_register(&bcma_bus_type); + if (err) + return err; + +#ifdef CONFIG_BCMA_HOST_PCI + err = bcma_host_pci_init(); + if (err) { + pr_err("PCI host initialization failed\n"); + err = 0; + } +#endif + + return err; +} +fs_initcall(bcma_modinit); + +static void __exit bcma_modexit(void) +{ +#ifdef CONFIG_BCMA_HOST_PCI + bcma_host_pci_exit(); +#endif + bus_unregister(&bcma_bus_type); +} +module_exit(bcma_modexit) diff --git a/ANDROID_3.4.5/drivers/bcma/scan.c b/ANDROID_3.4.5/drivers/bcma/scan.c new file mode 100644 index 00000000..f94ccccc --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/scan.c @@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "scan.h" +#include "bcma_private.h" + +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_regs.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +struct bcma_device_id_name { + u16 id; + const char *name; +}; +struct bcma_device_id_name bcma_device_names[] = { + { BCMA_CORE_OOB_ROUTER, "OOB Router" }, + { BCMA_CORE_INVALID, "Invalid" }, + { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, + { BCMA_CORE_ILINE20, "ILine 20" }, + { BCMA_CORE_SRAM, "SRAM" }, + { BCMA_CORE_SDRAM, "SDRAM" }, + { BCMA_CORE_PCI, "PCI" }, + { BCMA_CORE_MIPS, "MIPS" }, + { BCMA_CORE_ETHERNET, "Fast Ethernet" }, + { BCMA_CORE_V90, "V90" }, + { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, + { BCMA_CORE_ADSL, "ADSL" }, + { BCMA_CORE_ILINE100, "ILine 100" }, + { BCMA_CORE_IPSEC, "IPSEC" }, + { BCMA_CORE_UTOPIA, "UTOPIA" }, + { BCMA_CORE_PCMCIA, "PCMCIA" }, + { BCMA_CORE_INTERNAL_MEM, "Internal Memory" }, + { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" }, + { BCMA_CORE_OFDM, "OFDM" }, + { BCMA_CORE_EXTIF, "EXTIF" }, + { BCMA_CORE_80211, "IEEE 802.11" }, + { BCMA_CORE_PHY_A, "PHY A" }, + { BCMA_CORE_PHY_B, "PHY B" }, + { BCMA_CORE_PHY_G, "PHY G" }, + { BCMA_CORE_MIPS_3302, "MIPS 3302" }, + { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, + { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, + { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, + { BCMA_CORE_USB20_DEV, "USB 2.0 Device" }, + { BCMA_CORE_SDIO_HOST, "SDIO Host" }, + { BCMA_CORE_ROBOSWITCH, "Roboswitch" }, + { BCMA_CORE_PARA_ATA, "PATA" }, + { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" }, + { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" }, + { BCMA_CORE_PCIE, "PCIe" }, + { BCMA_CORE_PHY_N, "PHY N" }, + { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, + { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, + { BCMA_CORE_ARM_1176, "ARM 1176" }, + { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, + { BCMA_CORE_PHY_LP, "PHY LP" }, + { BCMA_CORE_PMU, "PMU" }, + { BCMA_CORE_PHY_SSN, "PHY SSN" }, + { BCMA_CORE_SDIO_DEV, "SDIO Device" }, + { BCMA_CORE_ARM_CM3, "ARM CM3" }, + { BCMA_CORE_PHY_HT, "PHY HT" }, + { BCMA_CORE_MIPS_74K, "MIPS 74K" }, + { BCMA_CORE_MAC_GBIT, "GBit MAC" }, + { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, + { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, + { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" }, + { BCMA_CORE_SHARED_COMMON, "Common Shared" }, + { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" }, + { BCMA_CORE_SPI_HOST, "SPI Host" }, + { BCMA_CORE_I2S, "I2S" }, + { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" }, + { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_DEFAULT, "Default" }, +}; +const char *bcma_device_name(struct bcma_device_id *id) +{ + int i; + + if (id->manuf == BCMA_MANUF_BCM) { + for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { + if (bcma_device_names[i].id == id->id) + return bcma_device_names[i].name; + } + } + return "UNKNOWN"; +} + +static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx, + u16 offset) +{ + return readl(bus->mmio + offset); +} + +static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr) +{ + if (bus->hosttype == BCMA_HOSTTYPE_PCI) + pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN, + addr); +} + +static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = readl(*eromptr); + (*eromptr)++; + return ent; +} + +static void bcma_erom_push_ent(u32 **eromptr) +{ + (*eromptr)--; +} + +static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) + return -ENOENT; + if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI) + return -ENOENT; + return ent; +} + +static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); +} + +static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (((ent & SCAN_ER_VALID)) && + ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) && + ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); +} + +static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent; + while (1) { + ent = bcma_erom_get_ent(bus, eromptr); + if ((ent & SCAN_ER_VALID) && + ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI)) + break; + if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)) + break; + } + bcma_erom_push_ent(eromptr); +} + +static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) + return -ENOENT; + if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP) + return -ENOENT; + return ent; +} + +static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, + u32 type, u8 port) +{ + u32 addrl, addrh, sizel, sizeh = 0; + u32 size; + + u32 ent = bcma_erom_get_ent(bus, eromptr); + if ((!(ent & SCAN_ER_VALID)) || + ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) || + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); + return -EINVAL; + } + + addrl = ent & SCAN_ADDR_ADDR; + if (ent & SCAN_ADDR_AG32) + addrh = bcma_erom_get_ent(bus, eromptr); + else + addrh = 0; + + if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) { + size = bcma_erom_get_ent(bus, eromptr); + sizel = size & SCAN_SIZE_SZ; + if (size & SCAN_SIZE_SG32) + sizeh = bcma_erom_get_ent(bus, eromptr); + } else + sizel = SCAN_ADDR_SZ_BASE << + ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT); + + return addrl; +} + +static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus, + u16 index) +{ + struct bcma_device *core; + + list_for_each_entry(core, &bus->cores, list) { + if (core->core_index == index) + return core; + } + return NULL; +} + +static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + + list_for_each_entry_reverse(core, &bus->cores, list) { + if (core->id.id == coreid) + return core; + } + return NULL; +} + +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) +{ + s32 tmp; + u8 i, j; + s32 cia, cib; + u8 ports[2], wrappers[2]; + + /* get CIs */ + cia = bcma_erom_get_ci(bus, eromptr); + if (cia < 0) { + bcma_erom_push_ent(eromptr); + if (bcma_erom_is_end(bus, eromptr)) + return -ESPIPE; + return -EILSEQ; + } + cib = bcma_erom_get_ci(bus, eromptr); + if (cib < 0) + return -EILSEQ; + + /* parse CIs */ + core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; + core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; + core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; + ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; + ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; + wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; + wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; + core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; + + if (((core->id.manuf == BCMA_MANUF_ARM) && + (core->id.id == 0xFFF)) || + (ports[1] == 0)) { + bcma_erom_skip_component(bus, eromptr); + return -ENXIO; + } + + /* check if component is a core at all */ + if (wrappers[0] + wrappers[1] == 0) { + /* we could save addrl of the router + if (cid == BCMA_CORE_OOB_ROUTER) + */ + bcma_erom_skip_component(bus, eromptr); + return -ENXIO; + } + + if (bcma_erom_is_bridge(bus, eromptr)) { + bcma_erom_skip_component(bus, eromptr); + return -ENXIO; + } + + if (bcma_find_core_by_index(bus, core_num)) { + bcma_erom_skip_component(bus, eromptr); + return -ENODEV; + } + + if (match && ((match->manuf != BCMA_ANY_MANUF && + match->manuf != core->id.manuf) || + (match->id != BCMA_ANY_ID && match->id != core->id.id) || + (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) || + (match->class != BCMA_ANY_CLASS && match->class != core->id.class) + )) { + bcma_erom_skip_component(bus, eromptr); + return -ENODEV; + } + + /* get & parse master ports */ + for (i = 0; i < ports[0]; i++) { + s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr); + if (mst_port_d < 0) + return -EILSEQ; + } + + /* get & parse slave ports */ + for (i = 0; i < ports[1]; i++) { + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SLAVE, i); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ + break; + } else { + if (i == 0 && j == 0) + core->addr = tmp; + } + } + } + + /* get & parse master wrappers */ + for (i = 0; i < wrappers[0]; i++) { + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_MWRAP, i); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ + break; + } else { + if (i == 0 && j == 0) + core->wrap = tmp; + } + } + } + + /* get & parse slave wrappers */ + for (i = 0; i < wrappers[1]; i++) { + u8 hack = (ports[1] == 1) ? 0 : 1; + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ + break; + } else { + if (wrappers[0] == 0 && !i && !j) + core->wrap = tmp; + } + } + } + if (bus->hosttype == BCMA_HOSTTYPE_SOC) { + core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE); + if (!core->io_addr) + return -ENOMEM; + core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE); + if (!core->io_wrap) { + iounmap(core->io_addr); + return -ENOMEM; + } + } + return 0; +} + +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; + struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; + + INIT_LIST_HEAD(&bus->cores); + bus->nr_cores = 0; + + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); + chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; + pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", + chipinfo->id, chipinfo->rev, chipinfo->pkg); + + bus->init_done = true; +} + +int bcma_bus_scan(struct bcma_bus *bus) +{ + u32 erombase; + u32 __iomem *eromptr, *eromend; + + int err, core_num = 0; + + bcma_init_bus(bus); + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); + if (bus->hosttype == BCMA_HOSTTYPE_SOC) { + eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); + if (!eromptr) + return -ENOMEM; + } else { + eromptr = bus->mmio; + } + + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { + struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; + INIT_LIST_HEAD(&core->list); + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); + if (err < 0) { + kfree(core); + if (err == -ENODEV) { + core_num++; + continue; + } else if (err == -ENXIO) { + continue; + } else if (err == -ESPIPE) { + break; + } + return err; + } + + core->core_index = core_num++; + bus->nr_cores++; + other_core = bcma_find_core_reverse(bus, core->id.id); + core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", + core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + + list_add(&core->list, &bus->cores); + } + + if (bus->hosttype == BCMA_HOSTTYPE_SOC) + iounmap(eromptr); + + return 0; +} + +int __init bcma_bus_scan_early(struct bcma_bus *bus, + struct bcma_device_id *match, + struct bcma_device *core) +{ + u32 erombase; + u32 __iomem *eromptr, *eromend; + + int err = -ENODEV; + int core_num = 0; + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); + if (bus->hosttype == BCMA_HOSTTYPE_SOC) { + eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE); + if (!eromptr) + return -ENOMEM; + } else { + eromptr = bus->mmio; + } + + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { + memset(core, 0, sizeof(*core)); + INIT_LIST_HEAD(&core->list); + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, match, core_num, core); + if (err == -ENODEV) { + core_num++; + continue; + } else if (err == -ENXIO) + continue; + else if (err == -ESPIPE) + break; + else if (err < 0) + return err; + + core->core_index = core_num++; + bus->nr_cores++; + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", + core->core_index, bcma_device_name(&core->id), + core->id.manuf, core->id.id, core->id.rev, + core->id.class); + + list_add(&core->list, &bus->cores); + err = 0; + break; + } + + if (bus->hosttype == BCMA_HOSTTYPE_SOC) + iounmap(eromptr); + + return err; +} diff --git a/ANDROID_3.4.5/drivers/bcma/scan.h b/ANDROID_3.4.5/drivers/bcma/scan.h new file mode 100644 index 00000000..113e6a66 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/scan.h @@ -0,0 +1,56 @@ +#ifndef BCMA_SCAN_H_ +#define BCMA_SCAN_H_ + +#define BCMA_ADDR_BASE 0x18000000 +#define BCMA_WRAP_BASE 0x18100000 + +#define SCAN_ER_VALID 0x00000001 +#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */ +#define SCAN_ER_TAG 0x0000000E +#define SCAN_ER_TAG_CI 0x00000000 +#define SCAN_ER_TAG_MP 0x00000002 +#define SCAN_ER_TAG_ADDR 0x00000004 +#define SCAN_ER_TAG_END 0x0000000E +#define SCAN_ER_BAD 0xFFFFFFFF + +#define SCAN_CIA_CLASS 0x000000F0 +#define SCAN_CIA_CLASS_SHIFT 4 +#define SCAN_CIA_ID 0x000FFF00 +#define SCAN_CIA_ID_SHIFT 8 +#define SCAN_CIA_MANUF 0xFFF00000 +#define SCAN_CIA_MANUF_SHIFT 20 + +#define SCAN_CIB_NMP 0x000001F0 +#define SCAN_CIB_NMP_SHIFT 4 +#define SCAN_CIB_NSP 0x00003E00 +#define SCAN_CIB_NSP_SHIFT 9 +#define SCAN_CIB_NMW 0x0007C000 +#define SCAN_CIB_NMW_SHIFT 14 +#define SCAN_CIB_NSW 0x00F80000 +#define SCAN_CIB_NSW_SHIFT 17 +#define SCAN_CIB_REV 0xFF000000 +#define SCAN_CIB_REV_SHIFT 24 + +#define SCAN_ADDR_AG32 0x00000008 +#define SCAN_ADDR_SZ 0x00000030 +#define SCAN_ADDR_SZ_SHIFT 4 +#define SCAN_ADDR_SZ_4K 0x00000000 +#define SCAN_ADDR_SZ_8K 0x00000010 +#define SCAN_ADDR_SZ_16K 0x00000020 +#define SCAN_ADDR_SZ_SZD 0x00000030 +#define SCAN_ADDR_TYPE 0x000000C0 +#define SCAN_ADDR_TYPE_SLAVE 0x00000000 +#define SCAN_ADDR_TYPE_BRIDGE 0x00000040 +#define SCAN_ADDR_TYPE_SWRAP 0x00000080 +#define SCAN_ADDR_TYPE_MWRAP 0x000000C0 +#define SCAN_ADDR_PORT 0x00000F00 +#define SCAN_ADDR_PORT_SHIFT 8 +#define SCAN_ADDR_ADDR 0xFFFFF000 + +#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */ + +#define SCAN_SIZE_SZ_ALIGN 0x00000FFF +#define SCAN_SIZE_SZ 0xFFFFF000 +#define SCAN_SIZE_SG32 0x00000008 + +#endif /* BCMA_SCAN_H_ */ diff --git a/ANDROID_3.4.5/drivers/bcma/sprom.c b/ANDROID_3.4.5/drivers/bcma/sprom.c new file mode 100644 index 00000000..4588da27 --- /dev/null +++ b/ANDROID_3.4.5/drivers/bcma/sprom.c @@ -0,0 +1,453 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * + * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" + +#include <linux/bcma/bcma.h> +#include <linux/bcma/bcma_regs.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> + +static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); + +/** + * bcma_arch_register_fallback_sprom - Registers a method providing a + * fallback SPROM if no SPROM is found. + * + * @sprom_callback: The callback function. + * + * With this function the architecture implementation may register a + * callback handler which fills the SPROM data structure. The fallback is + * used for PCI based BCMA devices, where no valid SPROM can be found + * in the shadow registers and to provide the SPROM for SoCs where BCMA is + * to controll the system bus. + * + * This function is useful for weird architectures that have a half-assed + * BCMA device hardwired to their PCI bus. + * + * This function is available for architecture code, only. So it is not + * exported. + */ +int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, + struct ssb_sprom *out)) +{ + if (get_fallback_sprom) + return -EEXIST; + get_fallback_sprom = sprom_callback; + + return 0; +} + +static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, + struct ssb_sprom *out) +{ + int err; + + if (!get_fallback_sprom) { + err = -ENOENT; + goto fail; + } + + err = get_fallback_sprom(bus, out); + if (err) + goto fail; + + pr_debug("Using SPROM revision %d provided by" + " platform.\n", bus->sprom.revision); + return 0; +fail: + pr_warn("Using fallback SPROM failed (err %d)\n", err); + return err; +} + +/************************************************** + * R/W ops. + **************************************************/ + +static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) +{ + int i; + for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) + sprom[i] = bcma_read16(bus->drv_cc.core, + offset + (i * 2)); +} + +/************************************************** + * Validation. + **************************************************/ + +static inline u8 bcma_crc8(u8 crc, u8 data) +{ + /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ + static const u8 t[] = { + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, + }; + return t[crc ^ data]; +} + +static u8 bcma_sprom_crc(const u16 *sprom) +{ + int word; + u8 crc = 0xFF; + + for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { + crc = bcma_crc8(crc, sprom[word] & 0x00FF); + crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); + } + crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); + crc ^= 0xFF; + + return crc; +} + +static int bcma_sprom_check_crc(const u16 *sprom) +{ + u8 crc; + u8 expected_crc; + u16 tmp; + + crc = bcma_sprom_crc(sprom); + tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; + expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; + if (crc != expected_crc) + return -EPROTO; + + return 0; +} + +static int bcma_sprom_valid(const u16 *sprom) +{ + u16 revision; + int err; + + err = bcma_sprom_check_crc(sprom); + if (err) + return err; + + revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; + if (revision != 8 && revision != 9) { + pr_err("Unsupported SPROM revision: %d\n", revision); + return -ENOENT; + } + + return 0; +} + +/************************************************** + * SPROM extraction. + **************************************************/ + +#define SPOFF(offset) ((offset) / sizeof(u16)) + +#define SPEX(_field, _offset, _mask, _shift) \ + bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) + +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ + u16 v, o; + int i; + u16 pwr_info_offset[] = { + SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, + SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 + }; + BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != + ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; + + for (i = 0; i < 3; i++) { + v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + + SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); + + SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, + SSB_SPROM4_TXPID2G0_SHIFT); + SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, + SSB_SPROM4_TXPID2G1_SHIFT); + SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, + SSB_SPROM4_TXPID2G2_SHIFT); + SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, + SSB_SPROM4_TXPID2G3_SHIFT); + + SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, + SSB_SPROM4_TXPID5GL0_SHIFT); + SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, + SSB_SPROM4_TXPID5GL1_SHIFT); + SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, + SSB_SPROM4_TXPID5GL2_SHIFT); + SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, + SSB_SPROM4_TXPID5GL3_SHIFT); + + SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, + SSB_SPROM4_TXPID5G0_SHIFT); + SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, + SSB_SPROM4_TXPID5G1_SHIFT); + SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, + SSB_SPROM4_TXPID5G2_SHIFT); + SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, + SSB_SPROM4_TXPID5G3_SHIFT); + + SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, + SSB_SPROM4_TXPID5GH0_SHIFT); + SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, + SSB_SPROM4_TXPID5GH1_SHIFT); + SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, + SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, + SSB_SPROM4_TXPID5GH3_SHIFT); + + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); + + SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; + SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, + SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); + SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, + SSB_SPROM8_2G_MAXP, 0); + + SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); + + SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, + SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); + SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, + SSB_SPROM8_5G_MAXP, 0); + SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, + SSB_SPROM8_5GH_MAXP, 0); + SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, + SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); + + SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); + SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); + } + + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, + SSB_SROM8_FEM_TSSIPOS_SHIFT); + SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, + SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); + SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, + SSB_SROM8_FEM_PDET_RANGE_SHIFT); + SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, + SSB_SROM8_FEM_TSSIPOS_SHIFT); + SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, + SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); + SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, + SSB_SROM8_FEM_PDET_RANGE_SHIFT); + SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); +} + +/* + * Indicates the presence of external SPROM. + */ +static bool bcma_sprom_ext_available(struct bcma_bus *bus) +{ + u32 chip_status; + u32 srom_control; + u32 present_mask; + + if (bus->drv_cc.core->id.rev >= 31) { + if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) + return false; + + srom_control = bcma_read32(bus->drv_cc.core, + BCMA_CC_SROM_CONTROL); + return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; + } + + /* older chipcommon revisions use chip status register */ + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { + case 0x4313: + present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; + break; + + case 0x4331: + present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; + break; + + default: + return true; + } + + return chip_status & present_mask; +} + +/* + * Indicates that on-chip OTP memory is present and enabled. + */ +static bool bcma_sprom_onchip_available(struct bcma_bus *bus) +{ + u32 chip_status; + u32 otpsize = 0; + bool present; + + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { + case 0x4313: + present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; + break; + + case 0x4331: + present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; + break; + + case 43224: + case 43225: + /* for these chips OTP is always available */ + present = true; + break; + + default: + present = false; + break; + } + + if (present) { + otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; + otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; + } + + return otpsize != 0; +} + +/* + * Verify OTP is filled and determine the byte + * offset where SPROM data is located. + * + * On error, returns 0; byte offset otherwise. + */ +static int bcma_sprom_onchip_offset(struct bcma_bus *bus) +{ + struct bcma_device *cc = bus->drv_cc.core; + u32 offset; + + /* verify OTP status */ + if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) + return 0; + + /* obtain bit offset from otplayout register */ + offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); + return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ + u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + + if (!bcma_sprom_ext_available(bus)) { + bool sprom_onchip; + + /* + * External SPROM takes precedence so check + * on-chip OTP only when no external SPROM + * is present. + */ + sprom_onchip = bcma_sprom_onchip_available(bus); + if (sprom_onchip) { + /* determine offset */ + offset = bcma_sprom_onchip_offset(bus); + } + if (!offset || !sprom_onchip) { + /* + * Maybe there is no SPROM on the device? + * Now we ask the arch code if there is some sprom + * available for this device in some other storage. + */ + err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); + return err; + } + } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!sprom) + return -ENOMEM; + + if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + + pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); + + err = bcma_sprom_valid(sprom); + if (err) + goto out; + + bcma_sprom_extract_r8(bus, sprom); + +out: + kfree(sprom); + return err; +} |