diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/powerpc/platforms/pseries/eeh.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/powerpc/platforms/pseries/eeh.c | 1217 |
1 files changed, 0 insertions, 1217 deletions
diff --git a/ANDROID_3.4.5/arch/powerpc/platforms/pseries/eeh.c b/ANDROID_3.4.5/arch/powerpc/platforms/pseries/eeh.c deleted file mode 100644 index a75e37dc..00000000 --- a/ANDROID_3.4.5/arch/powerpc/platforms/pseries/eeh.c +++ /dev/null @@ -1,1217 +0,0 @@ -/* - * Copyright IBM Corporation 2001, 2005, 2006 - * Copyright Dave Engebretsen & Todd Inglett 2001 - * Copyright Linas Vepstas 2005, 2006 - * Copyright 2001-2012 IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com> - */ - -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/pci.h> -#include <linux/proc_fs.h> -#include <linux/rbtree.h> -#include <linux/seq_file.h> -#include <linux/spinlock.h> -#include <linux/export.h> -#include <linux/of.h> - -#include <linux/atomic.h> -#include <asm/eeh.h> -#include <asm/eeh_event.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/ppc-pci.h> -#include <asm/rtas.h> - - -/** Overview: - * EEH, or "Extended Error Handling" is a PCI bridge technology for - * dealing with PCI bus errors that can't be dealt with within the - * usual PCI framework, except by check-stopping the CPU. Systems - * that are designed for high-availability/reliability cannot afford - * to crash due to a "mere" PCI error, thus the need for EEH. - * An EEH-capable bridge operates by converting a detected error - * into a "slot freeze", taking the PCI adapter off-line, making - * the slot behave, from the OS'es point of view, as if the slot - * were "empty": all reads return 0xff's and all writes are silently - * ignored. EEH slot isolation events can be triggered by parity - * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by low voltage on the bus, dust, - * vibration, humidity, radioactivity or plain-old failed hardware. - * - * Note, however, that one of the leading causes of EEH slot - * freeze events are buggy device drivers, buggy device microcode, - * or buggy device hardware. This is because any attempt by the - * device to bus-master data to a memory address that is not - * assigned to the device will trigger a slot freeze. (The idea - * is to prevent devices-gone-wild from corrupting system memory). - * Buggy hardware/drivers will have a miserable time co-existing - * with EEH. - * - * Ideally, a PCI device driver, when suspecting that an isolation - * event has occurred (e.g. by reading 0xff's), will then ask EEH - * whether this is the case, and then take appropriate steps to - * reset the PCI slot, the PCI device, and then resume operations. - * However, until that day, the checking is done here, with the - * eeh_check_failure() routine embedded in the MMIO macros. If - * the slot is found to be isolated, an "EEH Event" is synthesized - * and sent out for processing. - */ - -/* If a device driver keeps reading an MMIO register in an interrupt - * handler after a slot isolation event, it might be broken. - * This sets the threshold for how many read attempts we allow - * before printing an error message. - */ -#define EEH_MAX_FAILS 2100000 - -/* Time to wait for a PCI slot to report status, in milliseconds */ -#define PCI_BUS_RESET_WAIT_MSEC (60*1000) - -/* Platform dependent EEH operations */ -struct eeh_ops *eeh_ops = NULL; - -int eeh_subsystem_enabled; -EXPORT_SYMBOL(eeh_subsystem_enabled); - -/* Lock to avoid races due to multiple reports of an error */ -static DEFINE_RAW_SPINLOCK(confirm_error_lock); - -/* Buffer for reporting pci register dumps. Its here in BSS, and - * not dynamically alloced, so that it ends up in RMO where RTAS - * can access it. - */ -#define EEH_PCI_REGS_LOG_LEN 4096 -static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN]; - -/* - * The struct is used to maintain the EEH global statistic - * information. Besides, the EEH global statistics will be - * exported to user space through procfs - */ -struct eeh_stats { - u64 no_device; /* PCI device not found */ - u64 no_dn; /* OF node not found */ - u64 no_cfg_addr; /* Config address not found */ - u64 ignored_check; /* EEH check skipped */ - u64 total_mmio_ffs; /* Total EEH checks */ - u64 false_positives; /* Unnecessary EEH checks */ - u64 slot_resets; /* PE reset */ -}; - -static struct eeh_stats eeh_stats; - -#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) - -/** - * eeh_gather_pci_data - Copy assorted PCI config space registers to buff - * @edev: device to report data for - * @buf: point to buffer in which to log - * @len: amount of room in buffer - * - * This routine captures assorted PCI configuration space data, - * and puts them into a buffer for RTAS error logging. - */ -static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) -{ - struct device_node *dn = eeh_dev_to_of_node(edev); - struct pci_dev *dev = eeh_dev_to_pci_dev(edev); - u32 cfg; - int cap, i; - int n = 0; - - n += scnprintf(buf+n, len-n, "%s\n", dn->full_name); - printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name); - - eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg); - n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg); - printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg); - - eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg); - n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); - printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); - - if (!dev) { - printk(KERN_WARNING "EEH: no PCI device for this of node\n"); - return n; - } - - /* Gather bridge-specific registers */ - if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { - eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg); - n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg); - printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg); - - eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg); - n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg); - printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg); - } - - /* Dump out the PCI-X command and status regs */ - cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); - if (cap) { - eeh_ops->read_config(dn, cap, 4, &cfg); - n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg); - printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg); - - eeh_ops->read_config(dn, cap+4, 4, &cfg); - n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg); - printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg); - } - - /* If PCI-E capable, dump PCI-E cap 10, and the AER */ - cap = pci_find_capability(dev, PCI_CAP_ID_EXP); - if (cap) { - n += scnprintf(buf+n, len-n, "pci-e cap10:\n"); - printk(KERN_WARNING - "EEH: PCI-E capabilities and status follow:\n"); - - for (i=0; i<=8; i++) { - eeh_ops->read_config(dn, cap+4*i, 4, &cfg); - n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); - printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); - } - - cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); - if (cap) { - n += scnprintf(buf+n, len-n, "pci-e AER:\n"); - printk(KERN_WARNING - "EEH: PCI-E AER capability register set follows:\n"); - - for (i=0; i<14; i++) { - eeh_ops->read_config(dn, cap+4*i, 4, &cfg); - n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); - printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg); - } - } - } - - /* Gather status on devices under the bridge */ - if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { - struct device_node *child; - - for_each_child_of_node(dn, child) { - if (of_node_to_eeh_dev(child)) - n += eeh_gather_pci_data(of_node_to_eeh_dev(child), buf+n, len-n); - } - } - - return n; -} - -/** - * eeh_slot_error_detail - Generate combined log including driver log and error log - * @edev: device to report error log for - * @severity: temporary or permanent error log - * - * This routine should be called to generate the combined log, which - * is comprised of driver log and error log. The driver log is figured - * out from the config space of the corresponding PCI device, while - * the error log is fetched through platform dependent function call. - */ -void eeh_slot_error_detail(struct eeh_dev *edev, int severity) -{ - size_t loglen = 0; - pci_regs_buf[0] = 0; - - eeh_pci_enable(edev, EEH_OPT_THAW_MMIO); - eeh_ops->configure_bridge(eeh_dev_to_of_node(edev)); - eeh_restore_bars(edev); - loglen = eeh_gather_pci_data(edev, pci_regs_buf, EEH_PCI_REGS_LOG_LEN); - - eeh_ops->get_log(eeh_dev_to_of_node(edev), severity, pci_regs_buf, loglen); -} - -/** - * eeh_token_to_phys - Convert EEH address token to phys address - * @token: I/O token, should be address in the form 0xA.... - * - * This routine should be called to convert virtual I/O address - * to physical one. - */ -static inline unsigned long eeh_token_to_phys(unsigned long token) -{ - pte_t *ptep; - unsigned long pa; - - ptep = find_linux_pte(init_mm.pgd, token); - if (!ptep) - return token; - pa = pte_pfn(*ptep) << PAGE_SHIFT; - - return pa | (token & (PAGE_SIZE-1)); -} - -/** - * eeh_find_device_pe - Retrieve the PE for the given device - * @dn: device node - * - * Return the PE under which this device lies - */ -struct device_node *eeh_find_device_pe(struct device_node *dn) -{ - while (dn->parent && of_node_to_eeh_dev(dn->parent) && - (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) { - dn = dn->parent; - } - return dn; -} - -/** - * __eeh_mark_slot - Mark all child devices as failed - * @parent: parent device - * @mode_flag: failure flag - * - * Mark all devices that are children of this device as failed. - * Mark the device driver too, so that it can see the failure - * immediately; this is critical, since some drivers poll - * status registers in interrupts ... If a driver is polling, - * and the slot is frozen, then the driver can deadlock in - * an interrupt context, which is bad. - */ -static void __eeh_mark_slot(struct device_node *parent, int mode_flag) -{ - struct device_node *dn; - - for_each_child_of_node(parent, dn) { - if (of_node_to_eeh_dev(dn)) { - /* Mark the pci device driver too */ - struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev; - - of_node_to_eeh_dev(dn)->mode |= mode_flag; - - if (dev && dev->driver) - dev->error_state = pci_channel_io_frozen; - - __eeh_mark_slot(dn, mode_flag); - } - } -} - -/** - * eeh_mark_slot - Mark the indicated device and its children as failed - * @dn: parent device - * @mode_flag: failure flag - * - * Mark the indicated device and its child devices as failed. - * The device drivers are marked as failed as well. - */ -void eeh_mark_slot(struct device_node *dn, int mode_flag) -{ - struct pci_dev *dev; - dn = eeh_find_device_pe(dn); - - /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) - dn = dn->parent; - - of_node_to_eeh_dev(dn)->mode |= mode_flag; - - /* Mark the pci device too */ - dev = of_node_to_eeh_dev(dn)->pdev; - if (dev) - dev->error_state = pci_channel_io_frozen; - - __eeh_mark_slot(dn, mode_flag); -} - -/** - * __eeh_clear_slot - Clear failure flag for the child devices - * @parent: parent device - * @mode_flag: flag to be cleared - * - * Clear failure flag for the child devices. - */ -static void __eeh_clear_slot(struct device_node *parent, int mode_flag) -{ - struct device_node *dn; - - for_each_child_of_node(parent, dn) { - if (of_node_to_eeh_dev(dn)) { - of_node_to_eeh_dev(dn)->mode &= ~mode_flag; - of_node_to_eeh_dev(dn)->check_count = 0; - __eeh_clear_slot(dn, mode_flag); - } - } -} - -/** - * eeh_clear_slot - Clear failure flag for the indicated device and its children - * @dn: parent device - * @mode_flag: flag to be cleared - * - * Clear failure flag for the indicated device and its children. - */ -void eeh_clear_slot(struct device_node *dn, int mode_flag) -{ - unsigned long flags; - raw_spin_lock_irqsave(&confirm_error_lock, flags); - - dn = eeh_find_device_pe(dn); - - /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) - dn = dn->parent; - - of_node_to_eeh_dev(dn)->mode &= ~mode_flag; - of_node_to_eeh_dev(dn)->check_count = 0; - __eeh_clear_slot(dn, mode_flag); - raw_spin_unlock_irqrestore(&confirm_error_lock, flags); -} - -/** - * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze - * @dn: device node - * @dev: pci device, if known - * - * Check for an EEH failure for the given device node. Call this - * routine if the result of a read was all 0xff's and you want to - * find out if this is due to an EEH slot freeze. This routine - * will query firmware for the EEH status. - * - * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a slot isolation event notification. - * - * It is safe to call this routine in an interrupt context. - */ -int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) -{ - int ret; - unsigned long flags; - struct eeh_dev *edev; - int rc = 0; - const char *location; - - eeh_stats.total_mmio_ffs++; - - if (!eeh_subsystem_enabled) - return 0; - - if (!dn) { - eeh_stats.no_dn++; - return 0; - } - dn = eeh_find_device_pe(dn); - edev = of_node_to_eeh_dev(dn); - - /* Access to IO BARs might get this far and still not want checking. */ - if (!(edev->mode & EEH_MODE_SUPPORTED) || - edev->mode & EEH_MODE_NOCHECK) { - eeh_stats.ignored_check++; - pr_debug("EEH: Ignored check (%x) for %s %s\n", - edev->mode, eeh_pci_name(dev), dn->full_name); - return 0; - } - - if (!edev->config_addr && !edev->pe_config_addr) { - eeh_stats.no_cfg_addr++; - return 0; - } - - /* If we already have a pending isolation event for this - * slot, we know it's bad already, we don't need to check. - * Do this checking under a lock; as multiple PCI devices - * in one slot might report errors simultaneously, and we - * only want one error recovery routine running. - */ - raw_spin_lock_irqsave(&confirm_error_lock, flags); - rc = 1; - if (edev->mode & EEH_MODE_ISOLATED) { - edev->check_count++; - if (edev->check_count % EEH_MAX_FAILS == 0) { - location = of_get_property(dn, "ibm,loc-code", NULL); - printk(KERN_ERR "EEH: %d reads ignored for recovering device at " - "location=%s driver=%s pci addr=%s\n", - edev->check_count, location, - eeh_driver_name(dev), eeh_pci_name(dev)); - printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n", - eeh_driver_name(dev)); - dump_stack(); - } - goto dn_unlock; - } - - /* - * Now test for an EEH failure. This is VERY expensive. - * Note that the eeh_config_addr may be a parent device - * in the case of a device behind a bridge, or it may be - * function zero of a multi-function device. - * In any case they must share a common PHB. - */ - ret = eeh_ops->get_state(dn, NULL); - - /* Note that config-io to empty slots may fail; - * they are empty when they don't have children. - * We will punt with the following conditions: Failure to get - * PE's state, EEH not support and Permanently unavailable - * state, PE is in good state. - */ - if ((ret < 0) || - (ret == EEH_STATE_NOT_SUPPORT) || - (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) == - (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) { - eeh_stats.false_positives++; - edev->false_positives ++; - rc = 0; - goto dn_unlock; - } - - eeh_stats.slot_resets++; - - /* Avoid repeated reports of this failure, including problems - * with other functions on this device, and functions under - * bridges. - */ - eeh_mark_slot(dn, EEH_MODE_ISOLATED); - raw_spin_unlock_irqrestore(&confirm_error_lock, flags); - - eeh_send_failure_event(edev); - - /* Most EEH events are due to device driver bugs. Having - * a stack trace will help the device-driver authors figure - * out what happened. So print that out. - */ - dump_stack(); - return 1; - -dn_unlock: - raw_spin_unlock_irqrestore(&confirm_error_lock, flags); - return rc; -} - -EXPORT_SYMBOL_GPL(eeh_dn_check_failure); - -/** - * eeh_check_failure - Check if all 1's data is due to EEH slot freeze - * @token: I/O token, should be address in the form 0xA.... - * @val: value, should be all 1's (XXX why do we need this arg??) - * - * Check for an EEH failure at the given token address. Call this - * routine if the result of a read was all 0xff's and you want to - * find out if this is due to an EEH slot freeze event. This routine - * will query firmware for the EEH status. - * - * Note this routine is safe to call in an interrupt context. - */ -unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) -{ - unsigned long addr; - struct pci_dev *dev; - struct device_node *dn; - - /* Finding the phys addr + pci device; this is pretty quick. */ - addr = eeh_token_to_phys((unsigned long __force) token); - dev = pci_addr_cache_get_device(addr); - if (!dev) { - eeh_stats.no_device++; - return val; - } - - dn = pci_device_to_OF_node(dev); - eeh_dn_check_failure(dn, dev); - - pci_dev_put(dev); - return val; -} - -EXPORT_SYMBOL(eeh_check_failure); - - -/** - * eeh_pci_enable - Enable MMIO or DMA transfers for this slot - * @edev: pci device node - * - * This routine should be called to reenable frozen MMIO or DMA - * so that it would work correctly again. It's useful while doing - * recovery or log collection on the indicated device. - */ -int eeh_pci_enable(struct eeh_dev *edev, int function) -{ - int rc; - struct device_node *dn = eeh_dev_to_of_node(edev); - - rc = eeh_ops->set_option(dn, function); - if (rc) - printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n", - function, rc, dn->full_name); - - rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC); - if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) && - (function == EEH_OPT_THAW_MMIO)) - return 0; - - return rc; -} - -/** - * pcibios_set_pcie_slot_reset - Set PCI-E reset state - * @dev: pci device struct - * @state: reset state to enter - * - * Return value: - * 0 if success - */ -int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) -{ - struct device_node *dn = pci_device_to_OF_node(dev); - - switch (state) { - case pcie_deassert_reset: - eeh_ops->reset(dn, EEH_RESET_DEACTIVATE); - break; - case pcie_hot_reset: - eeh_ops->reset(dn, EEH_RESET_HOT); - break; - case pcie_warm_reset: - eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL); - break; - default: - return -EINVAL; - }; - - return 0; -} - -/** - * __eeh_set_pe_freset - Check the required reset for child devices - * @parent: parent device - * @freset: return value - * - * Each device might have its preferred reset type: fundamental or - * hot reset. The routine is used to collect the information from - * the child devices so that they could be reset accordingly. - */ -void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset) -{ - struct device_node *dn; - - for_each_child_of_node(parent, dn) { - if (of_node_to_eeh_dev(dn)) { - struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev; - - if (dev && dev->driver) - *freset |= dev->needs_freset; - - __eeh_set_pe_freset(dn, freset); - } - } -} - -/** - * eeh_set_pe_freset - Check the required reset for the indicated device and its children - * @dn: parent device - * @freset: return value - * - * Each device might have its preferred reset type: fundamental or - * hot reset. The routine is used to collected the information for - * the indicated device and its children so that the bunch of the - * devices could be reset properly. - */ -void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset) -{ - struct pci_dev *dev; - dn = eeh_find_device_pe(dn); - - /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) - dn = dn->parent; - - dev = of_node_to_eeh_dev(dn)->pdev; - if (dev) - *freset |= dev->needs_freset; - - __eeh_set_pe_freset(dn, freset); -} - -/** - * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second - * @edev: pci device node to be reset. - * - * Assert the PCI #RST line for 1/4 second. - */ -static void eeh_reset_pe_once(struct eeh_dev *edev) -{ - unsigned int freset = 0; - struct device_node *dn = eeh_dev_to_of_node(edev); - - /* Determine type of EEH reset required for - * Partitionable Endpoint, a hot-reset (1) - * or a fundamental reset (3). - * A fundamental reset required by any device under - * Partitionable Endpoint trumps hot-reset. - */ - eeh_set_pe_freset(dn, &freset); - - if (freset) - eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL); - else - eeh_ops->reset(dn, EEH_RESET_HOT); - - /* The PCI bus requires that the reset be held high for at least - * a 100 milliseconds. We wait a bit longer 'just in case'. - */ -#define PCI_BUS_RST_HOLD_TIME_MSEC 250 - msleep(PCI_BUS_RST_HOLD_TIME_MSEC); - - /* We might get hit with another EEH freeze as soon as the - * pci slot reset line is dropped. Make sure we don't miss - * these, and clear the flag now. - */ - eeh_clear_slot(dn, EEH_MODE_ISOLATED); - - eeh_ops->reset(dn, EEH_RESET_DEACTIVATE); - - /* After a PCI slot has been reset, the PCI Express spec requires - * a 1.5 second idle time for the bus to stabilize, before starting - * up traffic. - */ -#define PCI_BUS_SETTLE_TIME_MSEC 1800 - msleep(PCI_BUS_SETTLE_TIME_MSEC); -} - -/** - * eeh_reset_pe - Reset the indicated PE - * @edev: PCI device associated EEH device - * - * This routine should be called to reset indicated device, including - * PE. A PE might include multiple PCI devices and sometimes PCI bridges - * might be involved as well. - */ -int eeh_reset_pe(struct eeh_dev *edev) -{ - int i, rc; - struct device_node *dn = eeh_dev_to_of_node(edev); - - /* Take three shots at resetting the bus */ - for (i=0; i<3; i++) { - eeh_reset_pe_once(edev); - - rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC); - if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) - return 0; - - if (rc < 0) { - printk(KERN_ERR "EEH: unrecoverable slot failure %s\n", - dn->full_name); - return -1; - } - printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n", - i+1, dn->full_name, rc); - } - - return -1; -} - -/** Save and restore of PCI BARs - * - * Although firmware will set up BARs during boot, it doesn't - * set up device BAR's after a device reset, although it will, - * if requested, set up bridge configuration. Thus, we need to - * configure the PCI devices ourselves. - */ - -/** - * eeh_restore_one_device_bars - Restore the Base Address Registers for one device - * @edev: PCI device associated EEH device - * - * Loads the PCI configuration space base address registers, - * the expansion ROM base address, the latency timer, and etc. - * from the saved values in the device node. - */ -static inline void eeh_restore_one_device_bars(struct eeh_dev *edev) -{ - int i; - u32 cmd; - struct device_node *dn = eeh_dev_to_of_node(edev); - - if (!edev->phb) - return; - - for (i=4; i<10; i++) { - eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]); - } - - /* 12 == Expansion ROM Address */ - eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]); - -#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) -#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)]) - - eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1, - SAVED_BYTE(PCI_CACHE_LINE_SIZE)); - - eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1, - SAVED_BYTE(PCI_LATENCY_TIMER)); - - /* max latency, min grant, interrupt pin and line */ - eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]); - - /* Restore PERR & SERR bits, some devices require it, - * don't touch the other command bits - */ - eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd); - if (edev->config_space[1] & PCI_COMMAND_PARITY) - cmd |= PCI_COMMAND_PARITY; - else - cmd &= ~PCI_COMMAND_PARITY; - if (edev->config_space[1] & PCI_COMMAND_SERR) - cmd |= PCI_COMMAND_SERR; - else - cmd &= ~PCI_COMMAND_SERR; - eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd); -} - -/** - * eeh_restore_bars - Restore the PCI config space info - * @edev: EEH device - * - * This routine performs a recursive walk to the children - * of this device as well. - */ -void eeh_restore_bars(struct eeh_dev *edev) -{ - struct device_node *dn; - if (!edev) - return; - - if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code)) - eeh_restore_one_device_bars(edev); - - for_each_child_of_node(eeh_dev_to_of_node(edev), dn) - eeh_restore_bars(of_node_to_eeh_dev(dn)); -} - -/** - * eeh_save_bars - Save device bars - * @edev: PCI device associated EEH device - * - * Save the values of the device bars. Unlike the restore - * routine, this routine is *not* recursive. This is because - * PCI devices are added individually; but, for the restore, - * an entire slot is reset at a time. - */ -static void eeh_save_bars(struct eeh_dev *edev) -{ - int i; - struct device_node *dn; - - if (!edev) - return; - dn = eeh_dev_to_of_node(edev); - - for (i = 0; i < 16; i++) - eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]); -} - -/** - * eeh_early_enable - Early enable EEH on the indicated device - * @dn: device node - * @data: BUID - * - * Enable EEH functionality on the specified PCI device. The function - * is expected to be called before real PCI probing is done. However, - * the PHBs have been initialized at this point. - */ -static void *eeh_early_enable(struct device_node *dn, void *data) -{ - int ret; - const u32 *class_code = of_get_property(dn, "class-code", NULL); - const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL); - const u32 *device_id = of_get_property(dn, "device-id", NULL); - const u32 *regs; - int enable; - struct eeh_dev *edev = of_node_to_eeh_dev(dn); - - edev->class_code = 0; - edev->mode = 0; - edev->check_count = 0; - edev->freeze_count = 0; - edev->false_positives = 0; - - if (!of_device_is_available(dn)) - return NULL; - - /* Ignore bad nodes. */ - if (!class_code || !vendor_id || !device_id) - return NULL; - - /* There is nothing to check on PCI to ISA bridges */ - if (dn->type && !strcmp(dn->type, "isa")) { - edev->mode |= EEH_MODE_NOCHECK; - return NULL; - } - edev->class_code = *class_code; - - /* Ok... see if this device supports EEH. Some do, some don't, - * and the only way to find out is to check each and every one. - */ - regs = of_get_property(dn, "reg", NULL); - if (regs) { - /* First register entry is addr (00BBSS00) */ - /* Try to enable eeh */ - ret = eeh_ops->set_option(dn, EEH_OPT_ENABLE); - - enable = 0; - if (ret == 0) { - edev->config_addr = regs[0]; - - /* If the newer, better, ibm,get-config-addr-info is supported, - * then use that instead. - */ - edev->pe_config_addr = eeh_ops->get_pe_addr(dn); - - /* Some older systems (Power4) allow the - * ibm,set-eeh-option call to succeed even on nodes - * where EEH is not supported. Verify support - * explicitly. - */ - ret = eeh_ops->get_state(dn, NULL); - if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT) - enable = 1; - } - - if (enable) { - eeh_subsystem_enabled = 1; - edev->mode |= EEH_MODE_SUPPORTED; - - pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n", - dn->full_name, edev->config_addr, - edev->pe_config_addr); - } else { - - /* This device doesn't support EEH, but it may have an - * EEH parent, in which case we mark it as supported. - */ - if (dn->parent && of_node_to_eeh_dev(dn->parent) && - (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) { - /* Parent supports EEH. */ - edev->mode |= EEH_MODE_SUPPORTED; - edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr; - return NULL; - } - } - } else { - printk(KERN_WARNING "EEH: %s: unable to get reg property.\n", - dn->full_name); - } - - eeh_save_bars(edev); - return NULL; -} - -/** - * eeh_ops_register - Register platform dependent EEH operations - * @ops: platform dependent EEH operations - * - * Register the platform dependent EEH operation callback - * functions. The platform should call this function before - * any other EEH operations. - */ -int __init eeh_ops_register(struct eeh_ops *ops) -{ - if (!ops->name) { - pr_warning("%s: Invalid EEH ops name for %p\n", - __func__, ops); - return -EINVAL; - } - - if (eeh_ops && eeh_ops != ops) { - pr_warning("%s: EEH ops of platform %s already existing (%s)\n", - __func__, eeh_ops->name, ops->name); - return -EEXIST; - } - - eeh_ops = ops; - - return 0; -} - -/** - * eeh_ops_unregister - Unreigster platform dependent EEH operations - * @name: name of EEH platform operations - * - * Unregister the platform dependent EEH operation callback - * functions. - */ -int __exit eeh_ops_unregister(const char *name) -{ - if (!name || !strlen(name)) { - pr_warning("%s: Invalid EEH ops name\n", - __func__); - return -EINVAL; - } - - if (eeh_ops && !strcmp(eeh_ops->name, name)) { - eeh_ops = NULL; - return 0; - } - - return -EEXIST; -} - -/** - * eeh_init - EEH initialization - * - * Initialize EEH by trying to enable it for all of the adapters in the system. - * As a side effect we can determine here if eeh is supported at all. - * Note that we leave EEH on so failed config cycles won't cause a machine - * check. If a user turns off EEH for a particular adapter they are really - * telling Linux to ignore errors. Some hardware (e.g. POWER5) won't - * grant access to a slot if EEH isn't enabled, and so we always enable - * EEH for all slots/all devices. - * - * The eeh-force-off option disables EEH checking globally, for all slots. - * Even if force-off is set, the EEH hardware is still enabled, so that - * newer systems can boot. - */ -void __init eeh_init(void) -{ - struct pci_controller *hose, *tmp; - struct device_node *phb; - int ret; - - /* call platform initialization function */ - if (!eeh_ops) { - pr_warning("%s: Platform EEH operation not found\n", - __func__); - return; - } else if ((ret = eeh_ops->init())) { - pr_warning("%s: Failed to call platform init function (%d)\n", - __func__, ret); - return; - } - - raw_spin_lock_init(&confirm_error_lock); - - /* Enable EEH for all adapters */ - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - phb = hose->dn; - traverse_pci_devices(phb, eeh_early_enable, NULL); - } - - if (eeh_subsystem_enabled) - printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n"); - else - printk(KERN_WARNING "EEH: No capable adapters found\n"); -} - -/** - * eeh_add_device_early - Enable EEH for the indicated device_node - * @dn: device node for which to set up EEH - * - * This routine must be used to perform EEH initialization for PCI - * devices that were added after system boot (e.g. hotplug, dlpar). - * This routine must be called before any i/o is performed to the - * adapter (inluding any config-space i/o). - * Whether this actually enables EEH or not for this device depends - * on the CEC architecture, type of the device, on earlier boot - * command-line arguments & etc. - */ -static void eeh_add_device_early(struct device_node *dn) -{ - struct pci_controller *phb; - - if (!dn || !of_node_to_eeh_dev(dn)) - return; - phb = of_node_to_eeh_dev(dn)->phb; - - /* USB Bus children of PCI devices will not have BUID's */ - if (NULL == phb || 0 == phb->buid) - return; - - eeh_early_enable(dn, NULL); -} - -/** - * eeh_add_device_tree_early - Enable EEH for the indicated device - * @dn: device node - * - * This routine must be used to perform EEH initialization for the - * indicated PCI device that was added after system boot (e.g. - * hotplug, dlpar). - */ -void eeh_add_device_tree_early(struct device_node *dn) -{ - struct device_node *sib; - - for_each_child_of_node(dn, sib) - eeh_add_device_tree_early(sib); - eeh_add_device_early(dn); -} -EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); - -/** - * eeh_add_device_late - Perform EEH initialization for the indicated pci device - * @dev: pci device for which to set up EEH - * - * This routine must be used to complete EEH initialization for PCI - * devices that were added after system boot (e.g. hotplug, dlpar). - */ -static void eeh_add_device_late(struct pci_dev *dev) -{ - struct device_node *dn; - struct eeh_dev *edev; - - if (!dev || !eeh_subsystem_enabled) - return; - - pr_debug("EEH: Adding device %s\n", pci_name(dev)); - - dn = pci_device_to_OF_node(dev); - edev = of_node_to_eeh_dev(dn); - if (edev->pdev == dev) { - pr_debug("EEH: Already referenced !\n"); - return; - } - WARN_ON(edev->pdev); - - pci_dev_get(dev); - edev->pdev = dev; - dev->dev.archdata.edev = edev; - - pci_addr_cache_insert_device(dev); - eeh_sysfs_add_device(dev); -} - -/** - * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus - * @bus: PCI bus - * - * This routine must be used to perform EEH initialization for PCI - * devices which are attached to the indicated PCI bus. The PCI bus - * is added after system boot through hotplug or dlpar. - */ -void eeh_add_device_tree_late(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - eeh_add_device_late(dev); - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - struct pci_bus *subbus = dev->subordinate; - if (subbus) - eeh_add_device_tree_late(subbus); - } - } -} -EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); - -/** - * eeh_remove_device - Undo EEH setup for the indicated pci device - * @dev: pci device to be removed - * - * This routine should be called when a device is removed from - * a running system (e.g. by hotplug or dlpar). It unregisters - * the PCI device from the EEH subsystem. I/O errors affecting - * this device will no longer be detected after this call; thus, - * i/o errors affecting this slot may leave this device unusable. - */ -static void eeh_remove_device(struct pci_dev *dev) -{ - struct eeh_dev *edev; - - if (!dev || !eeh_subsystem_enabled) - return; - edev = pci_dev_to_eeh_dev(dev); - - /* Unregister the device with the EEH/PCI address search system */ - pr_debug("EEH: Removing device %s\n", pci_name(dev)); - - if (!edev || !edev->pdev) { - pr_debug("EEH: Not referenced !\n"); - return; - } - edev->pdev = NULL; - dev->dev.archdata.edev = NULL; - pci_dev_put(dev); - - pci_addr_cache_remove_device(dev); - eeh_sysfs_remove_device(dev); -} - -/** - * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device - * @dev: PCI device - * - * This routine must be called when a device is removed from the - * running system through hotplug or dlpar. The corresponding - * PCI address cache will be removed. - */ -void eeh_remove_bus_device(struct pci_dev *dev) -{ - struct pci_bus *bus = dev->subordinate; - struct pci_dev *child, *tmp; - - eeh_remove_device(dev); - - if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - list_for_each_entry_safe(child, tmp, &bus->devices, bus_list) - eeh_remove_bus_device(child); - } -} -EXPORT_SYMBOL_GPL(eeh_remove_bus_device); - -static int proc_eeh_show(struct seq_file *m, void *v) -{ - if (0 == eeh_subsystem_enabled) { - seq_printf(m, "EEH Subsystem is globally disabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs); - } else { - seq_printf(m, "EEH Subsystem is enabled\n"); - seq_printf(m, - "no device=%llu\n" - "no device node=%llu\n" - "no config address=%llu\n" - "check not wanted=%llu\n" - "eeh_total_mmio_ffs=%llu\n" - "eeh_false_positives=%llu\n" - "eeh_slot_resets=%llu\n", - eeh_stats.no_device, - eeh_stats.no_dn, - eeh_stats.no_cfg_addr, - eeh_stats.ignored_check, - eeh_stats.total_mmio_ffs, - eeh_stats.false_positives, - eeh_stats.slot_resets); - } - - return 0; -} - -static int proc_eeh_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_eeh_show, NULL); -} - -static const struct file_operations proc_eeh_operations = { - .open = proc_eeh_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init eeh_init_proc(void) -{ - if (machine_is(pseries)) - proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations); - return 0; -} -__initcall(eeh_init_proc); |