diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/plat-omap/Kconfig')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/plat-omap/Kconfig | 208 |
1 files changed, 0 insertions, 208 deletions
diff --git a/ANDROID_3.4.5/arch/arm/plat-omap/Kconfig b/ANDROID_3.4.5/arch/arm/plat-omap/Kconfig deleted file mode 100644 index ad95c7a5..00000000 --- a/ANDROID_3.4.5/arch/arm/plat-omap/Kconfig +++ /dev/null @@ -1,208 +0,0 @@ -if ARCH_OMAP - -menu "TI OMAP Common Features" - -config ARCH_OMAP_OTG - bool - -choice - prompt "OMAP System Type" - default ARCH_OMAP2PLUS - -config ARCH_OMAP1 - bool "TI OMAP1" - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - select HAVE_IDE - select NEED_MACH_MEMORY_H - select NEED_MACH_IO_H if PCCARD - help - "Systems based on omap7xx, omap15xx or omap16xx" - -config ARCH_OMAP2PLUS - bool "TI OMAP2/3/4" - select CLKDEV_LOOKUP - select GENERIC_IRQ_CHIP - select OMAP_DM_TIMER - select USE_OF - select PROC_DEVICETREE if PROC_FS - help - "Systems based on OMAP2, OMAP3 or OMAP4" - -endchoice - -comment "OMAP Feature Selections" - -config OMAP_DEBUG_DEVICES - bool - help - For debug cards on TI reference boards. - -config OMAP_DEBUG_LEDS - bool - depends on OMAP_DEBUG_DEVICES - default y if LEDS_CLASS - -config OMAP_SMARTREFLEX - bool "SmartReflex support" - depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM - help - Say Y if you want to enable SmartReflex. - - SmartReflex can perform continuous dynamic voltage - scaling around the nominal operating point voltage - according to silicon characteristics and operating - conditions. Enabling SmartReflex reduces power - consumption. - - Please note, that by default SmartReflex is only - initialized. To enable the automatic voltage - compensation for vdd mpu and vdd core from user space, - user must write 1 to - /debug/voltage/vdd_<X>/smartreflex/autocomp, - where X is mpu or core for OMAP3. - Optionally autocompensation can be enabled in the kernel - by default during system init via the enable_on_init flag - which an be passed as platform data to the smartreflex driver. - -config OMAP_SMARTREFLEX_CLASS3 - bool "Class 3 mode of Smartreflex Implementation" - depends on OMAP_SMARTREFLEX && TWL4030_CORE - help - Say Y to enable Class 3 implementation of Smartreflex - - Class 3 implementation of Smartreflex employs continuous hardware - voltage calibration. - -config OMAP_RESET_CLOCKS - bool "Reset unused clocks during boot" - depends on ARCH_OMAP - help - Say Y if you want to reset unused clocks during boot. - This option saves power, but assumes all drivers are - using the clock framework. Broken drivers that do not - yet use clock framework may not work with this option. - If you are booting from another operating system, you - probably do not want this option enabled until your - device drivers work properly. - -config OMAP_MUX - bool "OMAP multiplexing support" - depends on ARCH_OMAP - default y - help - Pin multiplexing support for OMAP boards. If your bootloader - sets the multiplexing correctly, say N. Otherwise, or if unsure, - say Y. - -config OMAP_MUX_DEBUG - bool "Multiplexing debug output" - depends on OMAP_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. - -config OMAP_MUX_WARNINGS - bool "Warn about pins the bootloader didn't set up" - depends on OMAP_MUX - default y - help - Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings - printed, it's safe to deselect OMAP_MUX for your product. - -config OMAP_MBOX_FWK - tristate "Mailbox framework support" - depends on ARCH_OMAP - help - Say Y here if you want to use OMAP Mailbox framework support for - DSP, IVA1.0 and IVA2 in OMAP1/2/3. - -config OMAP_MBOX_KFIFO_SIZE - int "Mailbox kfifo default buffer size (bytes)" - depends on OMAP_MBOX_FWK - default 256 - help - Specify the default size of mailbox's kfifo buffers (bytes). - This can also be changed at runtime (via the mbox_kfifo_size - module parameter). - -config OMAP_IOMMU_IVA2 - bool - -config OMAP_MPU_TIMER - bool "Use mpu timer" - depends on ARCH_OMAP1 - help - Select this option if you want to use the OMAP mpu timer. This - timer provides more intra-tick resolution than the 32KHz timer, - but consumes more power. - -config OMAP_32K_TIMER - bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS - default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS) - help - Select this option if you want to enable the OMAP 32KHz timer. - This timer saves power compared to the OMAP_MPU_TIMER, and has - support for no tick during idle. The 32KHz timer provides less - intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX, 24XX, 34XX and OMAP4. - -config OMAP3_L2_AUX_SECURE_SAVE_RESTORE - bool "OMAP3 HS/EMU save and restore for L2 AUX control register" - depends on ARCH_OMAP3 && PM - default n - help - Without this option, L2 Auxiliary control register contents are - lost during off-mode entry on HS/EMU devices. This feature - requires support from PPA / boot-loader in HS/EMU devices, which - currently does not exist by default. - -config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID - int "Service ID for the support routine to set L2 AUX control" - depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE - default 43 - help - PPA routine service ID for setting L2 auxiliary control register. - -config OMAP_32K_TIMER_HZ - int "Kernel internal timer frequency for 32KHz timer" - range 32 1024 - depends on OMAP_32K_TIMER - default "128" - help - Kernel internal timer frequency should be a divisor of 32768, - such as 64 or 128. - -config OMAP_DM_TIMER - bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS - help - Select this option if you want to use OMAP Dual-Mode timers. - -config OMAP_SERIAL_WAKE - bool "Enable wake-up events for serial ports" - depends on ARCH_OMAP1 && OMAP_MUX - default y - help - Select this option if you want to have your system wake up - to data on the serial RX line. This allows you to wake the - system from serial console. - -choice - prompt "OMAP PM layer selection" - depends on ARCH_OMAP - default OMAP_PM_NOOP - -config OMAP_PM_NOOP - bool "No-op/debug PM layer" - -endchoice - -endmenu - -endif |