diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c | 1609 |
1 files changed, 0 insertions, 1609 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c b/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c deleted file mode 100644 index 8c6202bb..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-shmobile/board-mackerel.c +++ /dev/null @@ -1,1609 +0,0 @@ -/* - * mackerel board support - * - * Copyright (C) 2010 Renesas Solutions Corp. - * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> - * - * based on ap4evb - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/i2c.h> -#include <linux/leds.h> -#include <linux/mfd/tmio.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mmcif.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/sh_flctl.h> -#include <linux/pm_clock.h> -#include <linux/smsc911x.h> -#include <linux/sh_intc.h> -#include <linux/tca6416_keypad.h> -#include <linux/usb/renesas_usbhs.h> -#include <linux/dma-mapping.h> - -#include <video/sh_mobile_hdmi.h> -#include <video/sh_mobile_lcdc.h> -#include <media/sh_mobile_ceu.h> -#include <media/soc_camera.h> -#include <media/soc_camera_platform.h> -#include <sound/sh_fsi.h> - -#include <mach/common.h> -#include <mach/irqs.h> -#include <mach/sh7372.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -/* - * Address Interface BusWidth note - * ------------------------------------------------------------------ - * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON - * 0x0800_0000 user area - - * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF - * 0x1400_0000 Ether (LAN9220) 16bit - * 0x1600_0000 user area - cannot use with NAND - * 0x1800_0000 user area - - * 0x1A00_0000 - - * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit - */ - -/* - * CPU mode - * - * SW4 | Boot Area| Master | Remarks - * 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor| - * ----+-----+-----+-----+-----+-----+-----+----------+----------+-------------- - * ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM - * ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug - * ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug - * X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM - * OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM - * X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM - * OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone - * ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone -*/ - -/* - * NOR Flash ROM - * - * SW1 | SW2 | SW7 | NOR Flash ROM - * bit1 | bit1 bit2 | bit1 | Memory allocation - * ------+------------+------+------------------ - * OFF | ON OFF | ON | Area 0 - * OFF | ON OFF | OFF | Area 4 - */ - -/* - * SMSC 9220 - * - * SW1 SMSC 9220 - * ----------------------- - * ON access disable - * OFF access enable - */ - -/* - * NAND Flash ROM - * - * SW1 | SW2 | SW7 | NAND Flash ROM - * bit1 | bit1 bit2 | bit2 | Memory allocation - * ------+------------+------+------------------ - * OFF | ON OFF | ON | FCE 0 - * OFF | ON OFF | OFF | FCE 1 - */ - -/* - * External interrupt pin settings - * - * IRQX | pin setting | device | level - * ------+--------------------+--------------------+------- - * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low - * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High - * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low - * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low - * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low - * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High - * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High - */ - -/* - * USB - * - * USB0 : CN22 : Function - * USB1 : CN31 : Function/Host *1 - * - * J30 (for CN31) *1 - * ----------+---------------+------------- - * 1-2 short | VBUS 5V | Host - * open | external VBUS | Function - * - * CAUTION - * - * renesas_usbhs driver can use external interrupt mode - * (which come from USB-PHY) or autonomy mode (it use own interrupt) - * for detecting connection/disconnection when Function. - * USB will be power OFF while it has been disconnecting - * if external interrupt mode, and it is always power ON if autonomy mode, - * - * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", - * because Touchscreen is using IRQ7-PORT40. - * It is impossible to use IRQ7 demux on this board. - */ - -/* - * SDHI0 (CN12) - * - * SW56 : OFF - * - */ - -/* MMC /SDHI1 (CN7) - * - * I/O voltage : 1.8v - * - * Power voltage : 1.8v or 3.3v - * J22 : select power voltage *1 - * 1-2 pin : 1.8v - * 2-3 pin : 3.3v - * - * *1 - * Please change J22 depends the card to be used. - * MMC's OCR field set to support either voltage for the card inserted. - * - * SW1 | SW33 - * | bit1 | bit2 | bit3 | bit4 - * -------------+------+------+------+------- - * MMC0 OFF | OFF | X | ON | X (Use MMCIF) - * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI) - * - */ - -/* - * SDHI2 (CN23) - * - * microSD card sloct - * - */ - -/* - * FSI - AK4642 - * - * it needs amixer settings for playing - * - * amixer set "Headphone" on - * amixer set "HPOUTL Mixer DACH" on - * amixer set "HPOUTR Mixer DACH" on - */ - -/* - * FIXME !! - * - * gpio_no_direction - * gpio_pull_down - * are quick_hack. - * - * current gpio frame work doesn't have - * the method to control only pull up/down/free. - * this function should be replaced by correct gpio function - */ -static void __init gpio_no_direction(u32 addr) -{ - __raw_writeb(0x00, addr); -} - -static void __init gpio_pull_down(u32 addr) -{ - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xA0; - - __raw_writeb(data, addr); -} - -/* MTD */ -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x20000000, /* CS0 shadow instead of regular CS0 */ - .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */ - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* SMSC */ -static struct resource smc911x_resources[] = { - { - .start = 0x14000000, - .end = 0x16000000 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = evt2irq(0x02c0) /* IRQ6A */, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_info = { - .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, -}; - -static struct platform_device smc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, - .dev = { - .platform_data = &smsc911x_info, - }, -}; - -/* MERAM */ -static struct sh_mobile_meram_info mackerel_meram_info = { - .addr_mode = SH_MOBILE_MERAM_MODE1, -}; - -static struct resource meram_resources[] = { - [0] = { - .name = "regs", - .start = 0xe8000000, - .end = 0xe807ffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "meram", - .start = 0xe8080000, - .end = 0xe81fffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device meram_device = { - .name = "sh_mobile_meram", - .id = 0, - .num_resources = ARRAY_SIZE(meram_resources), - .resource = meram_resources, - .dev = { - .platform_data = &mackerel_meram_info, - }, -}; - -/* LCDC */ -static struct fb_videomode mackerel_lcdc_modes[] = { - { - .name = "WVGA Panel", - .xres = 800, - .yres = 480, - .left_margin = 220, - .right_margin = 110, - .hsync_len = 70, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .sync = 0, - }, -}; - -static int mackerel_set_brightness(int brightness) -{ - gpio_set_value(GPIO_PORT31, brightness); - - return 0; -} - -static int mackerel_get_brightness(void) -{ - return gpio_get_value(GPIO_PORT31); -} - -static const struct sh_mobile_meram_cfg lcd_meram_cfg = { - .icb[0] = { - .meram_size = 0x40, - }, - .icb[1] = { - .meram_size = 0x40, - }, -}; - -static struct sh_mobile_lcdc_info lcdc_info = { - .meram_dev = &mackerel_meram_info, - .clock_source = LCDC_CLK_BUS, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .lcd_modes = mackerel_lcdc_modes, - .num_modes = ARRAY_SIZE(mackerel_lcdc_modes), - .interface_type = RGB24, - .clock_divider = 3, - .flags = 0, - .panel_cfg = { - .width = 152, - .height = 91, - }, - .bl_info = { - .name = "sh_mobile_lcdc_bl", - .max_brightness = 1, - .set_brightness = mackerel_set_brightness, - .get_brightness = mackerel_get_brightness, - }, - .meram_cfg = &lcd_meram_cfg, - } -}; - -static struct resource lcdc_resources[] = { - [0] = { - .name = "LCDC", - .start = 0xfe940000, - .end = 0xfe943fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(lcdc_resources), - .resource = lcdc_resources, - .dev = { - .platform_data = &lcdc_info, - .coherent_dma_mask = ~0, - }, -}; - -/* HDMI */ -static struct sh_mobile_hdmi_info hdmi_info = { - .flags = HDMI_SND_SRC_SPDIF, -}; - -static struct resource hdmi_resources[] = { - [0] = { - .name = "HDMI", - .start = 0xe6be0000, - .end = 0xe6be00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* There's also an HDMI interrupt on INTCS @ 0x18e0 */ - .start = evt2irq(0x17e0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_device = { - .name = "sh-mobile-hdmi", - .num_resources = ARRAY_SIZE(hdmi_resources), - .resource = hdmi_resources, - .id = -1, - .dev = { - .platform_data = &hdmi_info, - }, -}; - -static const struct sh_mobile_meram_cfg hdmi_meram_cfg = { - .icb[0] = { - .meram_size = 0x100, - }, - .icb[1] = { - .meram_size = 0x100, - }, -}; - -static struct sh_mobile_lcdc_info hdmi_lcdc_info = { - .meram_dev = &mackerel_meram_info, - .clock_source = LCDC_CLK_EXTERNAL, - .ch[0] = { - .chan = LCDC_CHAN_MAINLCD, - .fourcc = V4L2_PIX_FMT_RGB565, - .interface_type = RGB24, - .clock_divider = 1, - .flags = LCDC_FLAGS_DWPOL, - .meram_cfg = &hdmi_meram_cfg, - .tx_dev = &hdmi_device, - } -}; - -static struct resource hdmi_lcdc_resources[] = { - [0] = { - .name = "LCDC1", - .start = 0xfe944000, - .end = 0xfe947fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x1780), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device hdmi_lcdc_device = { - .name = "sh_mobile_lcdc_fb", - .num_resources = ARRAY_SIZE(hdmi_lcdc_resources), - .resource = hdmi_lcdc_resources, - .id = 1, - .dev = { - .platform_data = &hdmi_lcdc_info, - .coherent_dma_mask = ~0, - }, -}; - -static struct platform_device fsi_hdmi_device = { - .name = "sh_fsi2_b_hdmi", -}; - -static void __init hdmi_init_pm_clock(void) -{ - struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick"); - int ret; - long rate; - - if (IS_ERR(hdmi_ick)) { - ret = PTR_ERR(hdmi_ick); - pr_err("Cannot get HDMI ICK: %d\n", ret); - goto out; - } - - ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk); - if (ret < 0) { - pr_err("Cannot set PLLC2 parent: %d, %d users\n", - ret, sh7372_pllc2_clk.usecount); - goto out; - } - - pr_debug("PLLC2 initial frequency %lu\n", - clk_get_rate(&sh7372_pllc2_clk)); - - rate = clk_round_rate(&sh7372_pllc2_clk, 594000000); - if (rate < 0) { - pr_err("Cannot get suitable rate: %ld\n", rate); - ret = rate; - goto out; - } - - ret = clk_set_rate(&sh7372_pllc2_clk, rate); - if (ret < 0) { - pr_err("Cannot set rate %ld: %d\n", rate, ret); - goto out; - } - - pr_debug("PLLC2 set frequency %lu\n", rate); - - ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); - if (ret < 0) - pr_err("Cannot set HDMI parent: %d\n", ret); - -out: - if (!IS_ERR(hdmi_ick)) - clk_put(hdmi_ick); -} - -/* USBHS0 is connected to CN22 which takes a USB Mini-B plug - * - * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug, - * but on this particular board IRQ7 is already used by - * the touch screen. This leaves us with software polling. - */ -#define USBHS0_POLL_INTERVAL (HZ * 5) - -struct usbhs_private { - unsigned int usbphyaddr; - unsigned int usbcrcaddr; - struct renesas_usbhs_platform_info info; - struct delayed_work work; - struct platform_device *pdev; -}; - -#define usbhs_get_priv(pdev) \ - container_of(renesas_usbhs_get_info(pdev), \ - struct usbhs_private, info) - -#define usbhs_is_connected(priv) \ - (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) - -static int usbhs_get_vbus(struct platform_device *pdev) -{ - return usbhs_is_connected(usbhs_get_priv(pdev)); -} - -static void usbhs_phy_reset(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* init phy */ - __raw_writew(0x8a0a, priv->usbcrcaddr); -} - -static int usbhs0_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -static void usbhs0_work_function(struct work_struct *work) -{ - struct usbhs_private *priv = container_of(work, struct usbhs_private, - work.work); - - renesas_usbhs_call_notify_hotplug(priv->pdev); - schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); -} - -static int usbhs0_hardware_init(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - priv->pdev = pdev; - INIT_DELAYED_WORK(&priv->work, usbhs0_work_function); - schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); - return 0; -} - -static void usbhs0_hardware_exit(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - cancel_delayed_work_sync(&priv->work); -} - -static struct usbhs_private usbhs0_private = { - .usbcrcaddr = 0xe605810c, /* USBCR2 */ - .info = { - .platform_callback = { - .hardware_init = usbhs0_hardware_init, - .hardware_exit = usbhs0_hardware_exit, - .phy_reset = usbhs_phy_reset, - .get_id = usbhs0_get_id, - .get_vbus = usbhs_get_vbus, - }, - .driver_param = { - .buswait_bwait = 4, - .d0_tx_id = SHDMA_SLAVE_USB0_TX, - .d1_rx_id = SHDMA_SLAVE_USB0_RX, - }, - }, -}; - -static struct resource usbhs0_resources[] = { - [0] = { - .name = "USBHS0", - .start = 0xe6890000, - .end = 0xe68900e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ca0) /* USB0_USB0I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usbhs0_device = { - .name = "renesas_usbhs", - .id = 0, - .dev = { - .platform_data = &usbhs0_private.info, - }, - .num_resources = ARRAY_SIZE(usbhs0_resources), - .resource = usbhs0_resources, -}; - -/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug - * - * Use J30 to select between Host and Function. This setting - * can however not be detected by software. Hotplug of USBHS1 - * is provided via IRQ8. - * - * Current USB1 works as "USB Host". - * - set J30 "short" - * - * If you want to use it as "USB gadget", - * - J30 "open" - * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET - * - add .get_vbus = usbhs_get_vbus in usbhs1_private - */ -#define IRQ8 evt2irq(0x0300) -#define USB_PHY_MODE (1 << 4) -#define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) -#define USB_PHY_ON (1 << 1) -#define USB_PHY_OFF (1 << 0) -#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) - -static irqreturn_t usbhs1_interrupt(int irq, void *data) -{ - struct platform_device *pdev = data; - struct usbhs_private *priv = usbhs_get_priv(pdev); - - dev_dbg(&pdev->dev, "%s\n", __func__); - - renesas_usbhs_call_notify_hotplug(pdev); - - /* clear status */ - __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR, - priv->usbphyaddr); - - return IRQ_HANDLED; -} - -static int usbhs1_hardware_init(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - int ret; - - /* clear interrupt status */ - __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - - ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH, - dev_name(&pdev->dev), pdev); - if (ret) { - dev_err(&pdev->dev, "request_irq err\n"); - return ret; - } - - /* enable USB phy interrupt */ - __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr); - - return 0; -} - -static void usbhs1_hardware_exit(struct platform_device *pdev) -{ - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* clear interrupt status */ - __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - - free_irq(IRQ8, pdev); -} - -static int usbhs1_get_id(struct platform_device *pdev) -{ - return USBHS_HOST; -} - -static u32 usbhs1_pipe_cfg[] = { - USB_ENDPOINT_XFER_CONTROL, - USB_ENDPOINT_XFER_ISOC, - USB_ENDPOINT_XFER_ISOC, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_INT, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, - USB_ENDPOINT_XFER_BULK, -}; - -static struct usbhs_private usbhs1_private = { - .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */ - .usbcrcaddr = 0xe6058130, /* USBCR4 */ - .info = { - .platform_callback = { - .hardware_init = usbhs1_hardware_init, - .hardware_exit = usbhs1_hardware_exit, - .get_id = usbhs1_get_id, - .phy_reset = usbhs_phy_reset, - }, - .driver_param = { - .buswait_bwait = 4, - .has_otg = 1, - .pipe_type = usbhs1_pipe_cfg, - .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), - .d0_tx_id = SHDMA_SLAVE_USB1_TX, - .d1_rx_id = SHDMA_SLAVE_USB1_RX, - }, - }, -}; - -static struct resource usbhs1_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usbhs1_device = { - .name = "renesas_usbhs", - .id = 1, - .dev = { - .platform_data = &usbhs1_private.info, - }, - .num_resources = ARRAY_SIZE(usbhs1_resources), - .resource = usbhs1_resources, -}; - -/* LED */ -static struct gpio_led mackerel_leds[] = { - { - .name = "led0", - .gpio = GPIO_PORT0, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led1", - .gpio = GPIO_PORT1, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led2", - .gpio = GPIO_PORT2, - .default_state = LEDS_GPIO_DEFSTATE_ON, - }, - { - .name = "led3", - .gpio = GPIO_PORT159, - .default_state = LEDS_GPIO_DEFSTATE_ON, - } -}; - -static struct gpio_led_platform_data mackerel_leds_pdata = { - .leds = mackerel_leds, - .num_leds = ARRAY_SIZE(mackerel_leds), -}; - -static struct platform_device leds_device = { - .name = "leds-gpio", - .id = 0, - .dev = { - .platform_data = &mackerel_leds_pdata, - }, -}; - -/* FSI */ -#define IRQ_FSI evt2irq(0x1840) -static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) -{ - int ret; - - if (rate <= 0) - return 0; - - if (!enable) { - clk_disable(clk); - return 0; - } - - ret = clk_set_rate(clk, clk_round_rate(clk, rate)); - if (ret < 0) - return ret; - - return clk_enable(clk); -} - -static int fsi_b_set_rate(struct device *dev, int rate, int enable) -{ - struct clk *fsib_clk; - struct clk *fdiv_clk = &sh7372_fsidivb_clk; - long fsib_rate = 0; - long fdiv_rate = 0; - int ackmd_bpfmd; - int ret; - - /* clock start */ - switch (rate) { - case 44100: - fsib_rate = rate * 256; - ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; - break; - case 48000: - fsib_rate = 85428000; /* around 48kHz x 256 x 7 */ - fdiv_rate = rate * 256; - ackmd_bpfmd = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; - break; - default: - pr_err("unsupported rate in FSI2 port B\n"); - return -EINVAL; - } - - /* FSI B setting */ - fsib_clk = clk_get(dev, "ickb"); - if (IS_ERR(fsib_clk)) - return -EIO; - - /* fsib */ - ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); - if (ret < 0) - goto fsi_set_rate_end; - - /* FSI DIV */ - ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); - if (ret < 0) { - /* disable FSI B */ - if (enable) - __fsi_set_round_rate(fsib_clk, fsib_rate, 0); - goto fsi_set_rate_end; - } - - ret = ackmd_bpfmd; - -fsi_set_rate_end: - clk_put(fsib_clk); - return ret; -} - -static struct sh_fsi_platform_info fsi_info = { - .port_a = { - .flags = SH_FSI_BRS_INV, - }, - .port_b = { - .flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_FMT_SPDIF, - .set_rate = fsi_b_set_rate, - } -}; - -static struct resource fsi_resources[] = { - [0] = { - .name = "FSI", - .start = 0xFE3C0000, - .end = 0xFE3C0400 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FSI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device fsi_device = { - .name = "sh_fsi2", - .id = -1, - .num_resources = ARRAY_SIZE(fsi_resources), - .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, - }, -}; - -static struct fsi_ak4642_info fsi2_ak4643_info = { - .name = "AK4643", - .card = "FSI2A-AK4643", - .cpu_dai = "fsia-dai", - .codec = "ak4642-codec.0-0013", - .platform = "sh_fsi2", - .id = FSI_PORT_A, -}; - -static struct platform_device fsi_ak4643_device = { - .name = "fsi-ak4642-audio", - .dev = { - .platform_data = &fsi2_ak4643_info, - }, -}; - -/* FLCTL */ -static struct mtd_partition nand_partition_info[] = { - { - .name = "system", - .offset = 0, - .size = 128 * 1024 * 1024, - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, - .size = 256 * 1024 * 1024, - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, - .size = 128 * 1024 * 1024, - }, -}; - -static struct resource nand_flash_resources[] = { - [0] = { - .start = 0xe6a30000, - .end = 0xe6a3009b, - .flags = IORESOURCE_MEM, - } -}; - -static struct sh_flctl_platform_data nand_flash_data = { - .parts = nand_partition_info, - .nr_parts = ARRAY_SIZE(nand_partition_info), - .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET - | SHBUSSEL | SEL_16BIT | SNAND_E, - .use_holden = 1, -}; - -static struct platform_device nand_flash_device = { - .name = "sh_flctl", - .resource = nand_flash_resources, - .num_resources = ARRAY_SIZE(nand_flash_resources), - .dev = { - .platform_data = &nand_flash_data, - }, -}; - -/* - * The card detect pin of the top SD/MMC slot (CN7) is active low and is - * connected to GPIO A22 of SH7372 (GPIO_PORT41). - */ -static int slot_cn7_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(GPIO_PORT41); -} - -/* SDHI0 */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, - .tmio_flags = TMIO_MMC_USE_GPIO_CD, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ, - .cd_gpio = GPIO_PORT172, -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "SDHI0", - .start = 0xe6850000, - .end = 0xe68500ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static struct sh_mobile_sdhi_info sdhi1_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, - .tmio_ocr_mask = MMC_VDD_165_195, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, -}; - -static struct resource sdhi1_resources[] = { - [0] = { - .name = "SDHI1", - .start = 0xe6860000, - .end = 0xe68600ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, - .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ - .flags = IORESOURCE_IRQ, - }, - [3] = { - .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; -#endif - -/* - * The card detect pin of the top SD/MMC slot (CN23) is active low and is - * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162). - */ -static int slot_cn23_get_cd(struct platform_device *pdev) -{ - return !gpio_get_value(GPIO_PORT162); -} - -/* SDHI2 */ -static struct sh_mobile_sdhi_info sdhi2_info = { - .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ | - MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn23_get_cd, -}; - -static struct resource sdhi2_resources[] = { - [0] = { - .name = "SDHI2", - .start = 0xe6870000, - .end = 0xe68700ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT, - .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = SH_MOBILE_SDHI_IRQ_SDCARD, - .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ - .flags = IORESOURCE_IRQ, - }, - [3] = { - .name = SH_MOBILE_SDHI_IRQ_SDIO, - .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi2_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi2_resources), - .resource = sdhi2_resources, - .id = 2, - .dev = { - .platform_data = &sdhi2_info, - }, -}; - -/* SH_MMCIF */ -static struct resource sh_mmcif_resources[] = { - [0] = { - .name = "MMCIF", - .start = 0xE6BD0000, - .end = 0xE6BD00FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* MMC ERR */ - .start = evt2irq(0x1ac0), - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* MMC NOR */ - .start = evt2irq(0x1ae0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct sh_mmcif_plat_data sh_mmcif_plat = { - .sup_pclk = 0, - .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, - .caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NEEDS_POLL, - .get_cd = slot_cn7_get_cd, - .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, - .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, -}; - -static struct platform_device sh_mmcif_device = { - .name = "sh_mmcif", - .id = 0, - .dev = { - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - .platform_data = &sh_mmcif_plat, - }, - .num_resources = ARRAY_SIZE(sh_mmcif_resources), - .resource = sh_mmcif_resources, -}; - - -static int mackerel_camera_add(struct soc_camera_device *icd); -static void mackerel_camera_del(struct soc_camera_device *icd); - -static int camera_set_capture(struct soc_camera_platform_info *info, - int enable) -{ - return 0; /* camera sensor always enabled */ -} - -static struct soc_camera_platform_info camera_info = { - .format_name = "UYVY", - .format_depth = 16, - .format = { - .code = V4L2_MBUS_FMT_UYVY8_2X8, - .colorspace = V4L2_COLORSPACE_SMPTE170M, - .field = V4L2_FIELD_NONE, - .width = 640, - .height = 480, - }, - .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | - V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | - V4L2_MBUS_DATA_ACTIVE_HIGH, - .mbus_type = V4L2_MBUS_PARALLEL, - .set_capture = camera_set_capture, -}; - -static struct soc_camera_link camera_link = { - .bus_id = 0, - .add_device = mackerel_camera_add, - .del_device = mackerel_camera_del, - .module_name = "soc_camera_platform", - .priv = &camera_info, -}; - -static struct platform_device *camera_device; - -static void mackerel_camera_release(struct device *dev) -{ - soc_camera_platform_release(&camera_device); -} - -static int mackerel_camera_add(struct soc_camera_device *icd) -{ - return soc_camera_platform_add(icd, &camera_device, &camera_link, - mackerel_camera_release, 0); -} - -static void mackerel_camera_del(struct soc_camera_device *icd) -{ - soc_camera_platform_del(icd, camera_device, &camera_link); -} - -static struct sh_mobile_ceu_info sh_mobile_ceu_info = { - .flags = SH_CEU_FLAG_USE_8BIT_BUS, -}; - -static struct resource ceu_resources[] = { - [0] = { - .name = "CEU", - .start = 0xfe910000, - .end = 0xfe91009f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0x880), - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* place holder for contiguous memory */ - }, -}; - -static struct platform_device ceu_device = { - .name = "sh_mobile_ceu", - .id = 0, /* "ceu0" clock */ - .num_resources = ARRAY_SIZE(ceu_resources), - .resource = ceu_resources, - .dev = { - .platform_data = &sh_mobile_ceu_info, - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device mackerel_camera = { - .name = "soc-camera-pdrv", - .id = 0, - .dev = { - .platform_data = &camera_link, - }, -}; - -static struct platform_device *mackerel_devices[] __initdata = { - &nor_flash_device, - &smc911x_device, - &lcdc_device, - &usbhs1_device, - &usbhs0_device, - &leds_device, - &fsi_device, - &fsi_ak4643_device, - &fsi_hdmi_device, - &nand_flash_device, - &sdhi0_device, -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - &sdhi1_device, -#endif - &sdhi2_device, - &sh_mmcif_device, - &ceu_device, - &mackerel_camera, - &hdmi_device, - &hdmi_lcdc_device, - &meram_device, -}; - -/* Keypad Initialization */ -#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \ -{ \ - .type = ev_type, \ - .code = ev_code, \ - .active_low = act_low, \ -} - -#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1) - -static struct tca6416_button mackerel_gpio_keys[] = { - KEYPAD_BUTTON_LOW(KEY_HOME), - KEYPAD_BUTTON_LOW(KEY_MENU), - KEYPAD_BUTTON_LOW(KEY_BACK), - KEYPAD_BUTTON_LOW(KEY_POWER), -}; - -static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = { - .buttons = mackerel_gpio_keys, - .nbuttons = ARRAY_SIZE(mackerel_gpio_keys), - .rep = 1, - .use_polling = 0, - .pinmask = 0x000F, -}; - -/* I2C */ -#define IRQ7 evt2irq(0x02e0) -#define IRQ9 evt2irq(0x0320) - -static struct i2c_board_info i2c0_devices[] = { - { - I2C_BOARD_INFO("ak4643", 0x13), - }, - /* Keypad */ - { - I2C_BOARD_INFO("tca6408-keys", 0x20), - .platform_data = &mackerel_tca6416_keys_info, - .irq = IRQ9, - }, - /* Touchscreen */ - { - I2C_BOARD_INFO("st1232-ts", 0x55), - .irq = IRQ7, - }, -}; - -#define IRQ21 evt2irq(0x32a0) - -static struct i2c_board_info i2c1_devices[] = { - /* Accelerometer */ - { - I2C_BOARD_INFO("adxl34x", 0x53), - .irq = IRQ21, - }, -}; - -#define GPIO_PORT9CR 0xE6051009 -#define GPIO_PORT10CR 0xE605100A -#define GPIO_PORT167CR 0xE60520A7 -#define GPIO_PORT168CR 0xE60520A8 -#define SRCR4 0xe61580bc -#define USCCR1 0xE6058144 -static void __init mackerel_init(void) -{ - u32 srcr4; - struct clk *clk; - - /* External clock source */ - clk_set_rate(&sh7372_dv_clki_clk, 27000000); - - sh7372_pinmux_init(); - - /* enable SCIFA0 */ - gpio_request(GPIO_FN_SCIFA0_TXD, NULL); - gpio_request(GPIO_FN_SCIFA0_RXD, NULL); - - /* enable SMSC911X */ - gpio_request(GPIO_FN_CS5A, NULL); - gpio_request(GPIO_FN_IRQ6_39, NULL); - - /* LCDC */ - gpio_request(GPIO_FN_LCDD23, NULL); - gpio_request(GPIO_FN_LCDD22, NULL); - gpio_request(GPIO_FN_LCDD21, NULL); - gpio_request(GPIO_FN_LCDD20, NULL); - gpio_request(GPIO_FN_LCDD19, NULL); - gpio_request(GPIO_FN_LCDD18, NULL); - gpio_request(GPIO_FN_LCDD17, NULL); - gpio_request(GPIO_FN_LCDD16, NULL); - gpio_request(GPIO_FN_LCDD15, NULL); - gpio_request(GPIO_FN_LCDD14, NULL); - gpio_request(GPIO_FN_LCDD13, NULL); - gpio_request(GPIO_FN_LCDD12, NULL); - gpio_request(GPIO_FN_LCDD11, NULL); - gpio_request(GPIO_FN_LCDD10, NULL); - gpio_request(GPIO_FN_LCDD9, NULL); - gpio_request(GPIO_FN_LCDD8, NULL); - gpio_request(GPIO_FN_LCDD7, NULL); - gpio_request(GPIO_FN_LCDD6, NULL); - gpio_request(GPIO_FN_LCDD5, NULL); - gpio_request(GPIO_FN_LCDD4, NULL); - gpio_request(GPIO_FN_LCDD3, NULL); - gpio_request(GPIO_FN_LCDD2, NULL); - gpio_request(GPIO_FN_LCDD1, NULL); - gpio_request(GPIO_FN_LCDD0, NULL); - gpio_request(GPIO_FN_LCDDISP, NULL); - gpio_request(GPIO_FN_LCDDCK, NULL); - - gpio_request(GPIO_PORT31, NULL); /* backlight */ - gpio_direction_output(GPIO_PORT31, 0); /* off by default */ - - gpio_request(GPIO_PORT151, NULL); /* LCDDON */ - gpio_direction_output(GPIO_PORT151, 1); - - /* USBHS0 */ - gpio_request(GPIO_FN_VBUS0_0, NULL); - gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ - - /* USBHS1 */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ - gpio_request(GPIO_FN_IDIN_1_113, NULL); - - /* enable FSI2 port A (ak4643) */ - gpio_request(GPIO_FN_FSIAIBT, NULL); - gpio_request(GPIO_FN_FSIAILR, NULL); - gpio_request(GPIO_FN_FSIAISLD, NULL); - gpio_request(GPIO_FN_FSIAOSLD, NULL); - gpio_request(GPIO_PORT161, NULL); - gpio_direction_output(GPIO_PORT161, 0); /* slave */ - - gpio_request(GPIO_PORT9, NULL); - gpio_request(GPIO_PORT10, NULL); - gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ - gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ - - intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */ - - /* setup FSI2 port B (HDMI) */ - gpio_request(GPIO_FN_FSIBCK, NULL); - __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ - - /* set SPU2 clock to 119.6 MHz */ - clk = clk_get(NULL, "spu_clk"); - if (!IS_ERR(clk)) { - clk_set_rate(clk, clk_round_rate(clk, 119600000)); - clk_put(clk); - } - - /* enable Keypad */ - gpio_request(GPIO_FN_IRQ9_42, NULL); - irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH); - - /* enable Touchscreen */ - gpio_request(GPIO_FN_IRQ7_40, NULL); - irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW); - - /* enable Accelerometer */ - gpio_request(GPIO_FN_IRQ21, NULL); - irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); - - /* enable SDHI0 */ - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - /* enable SDHI1 */ - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); -#endif - /* card detect pin for MMC slot (CN7) */ - gpio_request(GPIO_PORT41, NULL); - gpio_direction_input(GPIO_PORT41); - - /* enable SDHI2 */ - gpio_request(GPIO_FN_SDHICMD2, NULL); - gpio_request(GPIO_FN_SDHICLK2, NULL); - gpio_request(GPIO_FN_SDHID2_3, NULL); - gpio_request(GPIO_FN_SDHID2_2, NULL); - gpio_request(GPIO_FN_SDHID2_1, NULL); - gpio_request(GPIO_FN_SDHID2_0, NULL); - - /* card detect pin for microSD slot (CN23) */ - gpio_request(GPIO_PORT162, NULL); - gpio_direction_input(GPIO_PORT162); - - /* MMCIF */ - gpio_request(GPIO_FN_MMCD0_0, NULL); - gpio_request(GPIO_FN_MMCD0_1, NULL); - gpio_request(GPIO_FN_MMCD0_2, NULL); - gpio_request(GPIO_FN_MMCD0_3, NULL); - gpio_request(GPIO_FN_MMCD0_4, NULL); - gpio_request(GPIO_FN_MMCD0_5, NULL); - gpio_request(GPIO_FN_MMCD0_6, NULL); - gpio_request(GPIO_FN_MMCD0_7, NULL); - gpio_request(GPIO_FN_MMCCMD0, NULL); - gpio_request(GPIO_FN_MMCCLK0, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_D0_NAF0, NULL); - gpio_request(GPIO_FN_D1_NAF1, NULL); - gpio_request(GPIO_FN_D2_NAF2, NULL); - gpio_request(GPIO_FN_D3_NAF3, NULL); - gpio_request(GPIO_FN_D4_NAF4, NULL); - gpio_request(GPIO_FN_D5_NAF5, NULL); - gpio_request(GPIO_FN_D6_NAF6, NULL); - gpio_request(GPIO_FN_D7_NAF7, NULL); - gpio_request(GPIO_FN_D8_NAF8, NULL); - gpio_request(GPIO_FN_D9_NAF9, NULL); - gpio_request(GPIO_FN_D10_NAF10, NULL); - gpio_request(GPIO_FN_D11_NAF11, NULL); - gpio_request(GPIO_FN_D12_NAF12, NULL); - gpio_request(GPIO_FN_D13_NAF13, NULL); - gpio_request(GPIO_FN_D14_NAF14, NULL); - gpio_request(GPIO_FN_D15_NAF15, NULL); - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_WE0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - gpio_request(GPIO_FN_A4_FOE, NULL); - gpio_request(GPIO_FN_A5_FCDE, NULL); - gpio_request(GPIO_FN_RD_FSC, NULL); - - /* enable GPS module (GT-720F) */ - gpio_request(GPIO_FN_SCIFA2_TXD1, NULL); - gpio_request(GPIO_FN_SCIFA2_RXD1, NULL); - - /* CEU */ - gpio_request(GPIO_FN_VIO_CLK, NULL); - gpio_request(GPIO_FN_VIO_VD, NULL); - gpio_request(GPIO_FN_VIO_HD, NULL); - gpio_request(GPIO_FN_VIO_FIELD, NULL); - gpio_request(GPIO_FN_VIO_CKO, NULL); - gpio_request(GPIO_FN_VIO_D7, NULL); - gpio_request(GPIO_FN_VIO_D6, NULL); - gpio_request(GPIO_FN_VIO_D5, NULL); - gpio_request(GPIO_FN_VIO_D4, NULL); - gpio_request(GPIO_FN_VIO_D3, NULL); - gpio_request(GPIO_FN_VIO_D2, NULL); - gpio_request(GPIO_FN_VIO_D1, NULL); - gpio_request(GPIO_FN_VIO_D0, NULL); - - /* HDMI */ - gpio_request(GPIO_FN_HDMI_HPD, NULL); - gpio_request(GPIO_FN_HDMI_CEC, NULL); - - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ - srcr4 = __raw_readl(SRCR4); - __raw_writel(srcr4 | (1 << 13), SRCR4); - udelay(50); - __raw_writel(srcr4 & ~(1 << 13), SRCR4); - - i2c_register_board_info(0, i2c0_devices, - ARRAY_SIZE(i2c0_devices)); - i2c_register_board_info(1, i2c1_devices, - ARRAY_SIZE(i2c1_devices)); - - sh7372_add_standard_devices(); - - platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); - - sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); - sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device); - sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device); - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device); -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device); -#endif - sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device); - sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device); - - hdmi_init_pm_clock(); - sh7372_pm_init(); - pm_clk_add(&fsi_device.dev, "spu2"); - pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); -} - -MACHINE_START(MACKEREL, "mackerel") - .map_io = sh7372_map_io, - .init_early = sh7372_add_early_devices, - .init_irq = sh7372_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = mackerel_init, - .timer = &shmobile_timer, -MACHINE_END |