diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach')
20 files changed, 0 insertions, 1467 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/crag6410.h deleted file mode 100644 index 4cb2f951..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/crag6410.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Cragganmore 6410 shared definitions - * - * Copyright 2011 Wolfson Microelectronics plc - * Mark Brown <broonie@opensource.wolfsonmicro.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef MACH_CRAG6410_H -#define MACH_CRAG6410_H - -#include <linux/gpio.h> - -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) -#define CODEC_IRQ_BASE (IRQ_BOARD_START + 128) - -#define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 32) -#define BANFF_PMIC_GPIO_BASE (GPIO_BOARD_START + 64) -#define MMGPIO_GPIO_BASE (GPIO_BOARD_START + 96) - -#endif diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/debug-macro.S deleted file mode 100644 index c0c076a9..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ /dev/null @@ -1,38 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - /* note, for the boot process to work we have to keep the UART - * virtual address aligned to an 1MiB boundary for the L1 - * mapping the head code makes. We keep the UART virtual address - * aligned and add in the offset when we load the value here. - */ - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/dma.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/dma.h deleted file mode 100644 index fe1a98cf..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/dma.h +++ /dev/null @@ -1,131 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/dma.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - DMA support - */ - -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H __FILE__ - -#define S3C_DMA_CHANNELS (16) - -/* see mach-s3c2410/dma.h for notes on dma channel numbers */ - -/* Note, for the S3C64XX architecture we keep the DMACH_ - * defines in the order they are allocated to [S]DMA0/[S]DMA1 - * so that is easy to do DHACH_ -> DMA controller conversion - */ -enum dma_ch { - /* DMA0/SDMA0 */ - DMACH_UART0 = 0, - DMACH_UART0_SRC2, - DMACH_UART1, - DMACH_UART1_SRC2, - DMACH_UART2, - DMACH_UART2_SRC2, - DMACH_UART3, - DMACH_UART3_SRC2, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_OUT, - DMACH_I2S0_IN, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_HSI_I2SV40_TX, - DMACH_HSI_I2SV40_RX, - - /* DMA1/SDMA1 */ - DMACH_PCM1_TX = 16, - DMACH_PCM1_RX, - DMACH_I2S1_OUT, - DMACH_I2S1_IN, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_AC97_PCMOUT, - DMACH_AC97_PCMIN, - DMACH_AC97_MICIN, - DMACH_PWM, - DMACH_IRDA, - DMACH_EXTERNAL, - DMACH_RES1, - DMACH_RES2, - DMACH_SECURITY_RX, /* SDMA1 only */ - DMACH_SECURITY_TX, /* SDMA1 only */ - DMACH_MAX /* the end */ -}; - -static inline bool samsung_dma_has_circular(void) -{ - return true; -} - -static inline bool samsung_dma_is_dmadev(void) -{ - return false; -} -#define S3C2410_DMAF_CIRCULAR (1 << 0) - -#include <plat/dma.h> - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -struct s3c64xx_dma_buff; - -/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor - * @next: Pointer to next buffer in queue or ring. - * @pw: Client provided identifier - * @lli: Pointer to hardware descriptor this buffer is associated with. - * @lli_dma: Hardare address of the descriptor. - */ -struct s3c64xx_dma_buff { - struct s3c64xx_dma_buff *next; - - void *pw; - struct pl080s_lli *lli; - dma_addr_t lli_dma; -}; - -struct s3c64xx_dmac; - -struct s3c2410_dma_chan { - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char bit; /* bit for enable/disable/etc */ - unsigned char hw_width; - unsigned char peripheral; - - unsigned int flags; - enum dma_data_direction source; - - - dma_addr_t dev_addr; - - struct s3c2410_dma_client *client; - struct s3c64xx_dmac *dmac; /* pointer to controller */ - - void __iomem *regs; - - /* cdriver callbacks */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* buffer list and information */ - struct s3c64xx_dma_buff *curr; /* current dma buffer */ - struct s3c64xx_dma_buff *next; /* next buffer to load */ - struct s3c64xx_dma_buff *end; /* end of queue */ - - /* note, when channel is running in circular mode, curr is the - * first buffer enqueued, end is the last and curr is where the - * last buffer-done event is set-at. The buffers are not freed - * and the last buffer hardware descriptor points back to the - * first. - */ -}; - -#include <plat/dma-core.h> - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/gpio.h deleted file mode 100644 index 8b540c42..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/gpio.h +++ /dev/null @@ -1,93 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/gpio.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* GPIO bank sizes */ -#define S3C64XX_GPIO_A_NR (8) -#define S3C64XX_GPIO_B_NR (7) -#define S3C64XX_GPIO_C_NR (8) -#define S3C64XX_GPIO_D_NR (5) -#define S3C64XX_GPIO_E_NR (5) -#define S3C64XX_GPIO_F_NR (16) -#define S3C64XX_GPIO_G_NR (7) -#define S3C64XX_GPIO_H_NR (10) -#define S3C64XX_GPIO_I_NR (16) -#define S3C64XX_GPIO_J_NR (12) -#define S3C64XX_GPIO_K_NR (16) -#define S3C64XX_GPIO_L_NR (15) -#define S3C64XX_GPIO_M_NR (6) -#define S3C64XX_GPIO_N_NR (16) -#define S3C64XX_GPIO_O_NR (16) -#define S3C64XX_GPIO_P_NR (15) -#define S3C64XX_GPIO_Q_NR (9) - -/* GPIO bank numbes */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S3C64XX_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s3c_gpio_number { - S3C64XX_GPIO_A_START = 0, - S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A), - S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B), - S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C), - S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D), - S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E), - S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F), - S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G), - S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H), - S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I), - S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J), - S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K), - S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L), - S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M), - S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N), - S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O), - S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P), -}; - -/* S3C64XX GPIO number definitions. */ - -#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr)) -#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr)) -#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr)) -#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr)) -#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr)) -#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr)) -#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr)) -#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr)) -#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr)) -#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr)) -#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr)) -#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr)) -#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr)) -#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr)) -#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr)) -#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr)) -#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr)) - -/* the end of the S3C64XX specific gpios */ -#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) -#define S3C_GPIO_END S3C64XX_GPIO_END - -/* define the number of gpios we need to the one after the GPQ() range */ -#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) - -#define BOARD_NR_GPIOS (16 + CONFIG_SAMSUNG_GPIO_EXTRA) - -#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS) diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/hardware.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/hardware.h deleted file mode 100644 index 862d033e..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/hardware.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C6400 - Hardware support - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_IRQ_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/irqs.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/irqs.h deleted file mode 100644 index 96d60e0d..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ /dev/null @@ -1,193 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - IRQ support - */ - -#ifndef __ASM_MACH_S3C64XX_IRQS_H -#define __ASM_MACH_S3C64XX_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S3C_IRQ_OFFSET (32) - -#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) - -#define IRQ_VIC0_BASE S3C_IRQ(0) -#define IRQ_VIC1_BASE S3C_IRQ(32) - -/* VIC based IRQs */ - -#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x)) -#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x)) - -/* VIC0 */ - -#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0) -#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1) -#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2) -#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3) -#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4) -#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5) -#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5) -#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6) -#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6) -#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7) -#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8) -#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8) -#define IRQ_POST0 S3C64XX_IRQ_VIC0(9) -#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10) -#define IRQ_2D S3C64XX_IRQ_VIC0(11) -#define IRQ_TVENC S3C64XX_IRQ_VIC0(12) -#define IRQ_SCALER S3C64XX_IRQ_VIC0(13) -#define IRQ_BATF S3C64XX_IRQ_VIC0(14) -#define IRQ_JPEG S3C64XX_IRQ_VIC0(15) -#define IRQ_MFC S3C64XX_IRQ_VIC0(16) -#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17) -#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18) -#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19) -#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20) -#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21) -#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22) -#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23) -#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24) -#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25) -#define IRQ_WDT S3C64XX_IRQ_VIC0(26) -#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27) -#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28) -#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29) -#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30) -#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31) - -/* VIC1 */ - -#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0) -#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1) -#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2) -#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3) -#define IRQ_AC97 S3C64XX_IRQ_VIC1(4) -#define IRQ_UART0 S3C64XX_IRQ_VIC1(5) -#define IRQ_UART1 S3C64XX_IRQ_VIC1(6) -#define IRQ_UART2 S3C64XX_IRQ_VIC1(7) -#define IRQ_UART3 S3C64XX_IRQ_VIC1(8) -#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9) -#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10) -#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11) -#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) -#define IRQ_NFC S3C64XX_IRQ_VIC1(13) -#define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_USBH S3C64XX_IRQ_VIC1(15) -#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) -#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) -#define IRQ_IIC S3C64XX_IRQ_VIC1(18) -#define IRQ_HSItx S3C64XX_IRQ_VIC1(19) -#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20) -#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21) -#define IRQ_MSM S3C64XX_IRQ_VIC1(22) -#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23) -#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24) -#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25) -#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ -#define IRQ_OTG S3C64XX_IRQ_VIC1(26) -#define IRQ_IRDA S3C64XX_IRQ_VIC1(27) -#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28) -#define IRQ_SEC S3C64XX_IRQ_VIC1(29) -#define IRQ_PENDN S3C64XX_IRQ_VIC1(30) -#define IRQ_TC IRQ_PENDN -#define IRQ_ADC S3C64XX_IRQ_VIC1(31) - -#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x)) - -#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0) -#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1) -#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2) -#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3) -#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4) - -/* compatibility for device defines */ - -#define IRQ_IIC1 IRQ_S3C6410_IIC1 - -/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series - * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE - * which we place after the pair of VICs. */ - -#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5) - -#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) -#define IRQ_EINT(x) S3C_EINT(x) -#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0)) - -/* Next the external interrupt groups. These are similar to the IRQ_EINT(x) - * that they are sourced from the GPIO pins but with a different scheme for - * priority and source indication. - * - * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO - * interrupts, but for historical reasons they are kept apart from these - * next interrupts. - * - * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the - * machine specific support files. - */ - -#define IRQ_EINT_GROUP1_NR (15) -#define IRQ_EINT_GROUP2_NR (8) -#define IRQ_EINT_GROUP3_NR (5) -#define IRQ_EINT_GROUP4_NR (14) -#define IRQ_EINT_GROUP5_NR (7) -#define IRQ_EINT_GROUP6_NR (10) -#define IRQ_EINT_GROUP7_NR (16) -#define IRQ_EINT_GROUP8_NR (15) -#define IRQ_EINT_GROUP9_NR (9) - -#define IRQ_EINT_GROUP_BASE S3C_EINT(28) -#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00) -#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) -#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) -#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR) -#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR) -#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) -#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) -#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR) -#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR) - -#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no)) - -/* Define a group of interrupts for board-specific use (eg, for MFD - * interrupt controllers). */ -#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) - -#ifdef CONFIG_MACH_WLF_CRAGG_6410 -#define IRQ_BOARD_NR 160 -#elif defined(CONFIG_SMDK6410_WM1190_EV1) -#define IRQ_BOARD_NR 64 -#elif defined(CONFIG_SMDK6410_WM1192_EV1) -#define IRQ_BOARD_NR 64 -#else -#define IRQ_BOARD_NR 16 -#endif - -#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_BOARD_END + 1) - -/* Compatibility */ - -#define IRQ_ONENAND IRQ_ONENAND0 -#define IRQ_I2S0 IRQ_S3C6410_IIS - -#endif /* __ASM_MACH_S3C64XX_IRQS_H */ - diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/map.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/map.h deleted file mode 100644 index 8e2097bb..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/map.h +++ /dev/null @@ -1,125 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/map.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s3c.h> - -/* - * Post-mux Chip Select Regions Xm0CSn_ - * These may be used by SROM, NAND or CF depending on settings - */ - -#define S3C64XX_PA_XM0CSN0 (0x10000000) -#define S3C64XX_PA_XM0CSN1 (0x18000000) -#define S3C64XX_PA_XM0CSN2 (0x20000000) -#define S3C64XX_PA_XM0CSN3 (0x28000000) -#define S3C64XX_PA_XM0CSN4 (0x30000000) -#define S3C64XX_PA_XM0CSN5 (0x38000000) - -/* HSMMC units */ -#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) -#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) -#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1) -#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2) - -#define S3C_PA_UART (0x7F005000) -#define S3C_PA_UART0 (S3C_PA_UART + 0x00) -#define S3C_PA_UART1 (S3C_PA_UART + 0x400) -#define S3C_PA_UART2 (S3C_PA_UART + 0x800) -#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) -#define S3C_UART_OFFSET (0x400) - -/* See notes on UART VA mapping in debug-macro.S */ -#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) - -#define S3C_VA_UART0 S3C_VA_UARTx(0) -#define S3C_VA_UART1 S3C_VA_UARTx(1) -#define S3C_VA_UART2 S3C_VA_UARTx(2) -#define S3C_VA_UART3 S3C_VA_UARTx(3) - -#define S3C64XX_PA_SROM (0x70000000) - -#define S3C64XX_PA_ONENAND0 (0x70100000) -#define S3C64XX_PA_ONENAND0_BUF (0x20000000) -#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M) - -/* NAND and OneNAND1 controllers occupy the same register region - (depending on SoC POP version) */ -#define S3C64XX_PA_ONENAND1 (0x70200000) -#define S3C64XX_PA_ONENAND1_BUF (0x28000000) -#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M) - -#define S3C64XX_PA_NAND (0x70200000) -#define S3C64XX_PA_FB (0x77100000) -#define S3C64XX_PA_USB_HSOTG (0x7C000000) -#define S3C64XX_PA_WATCHDOG (0x7E004000) -#define S3C64XX_PA_RTC (0x7E005000) -#define S3C64XX_PA_KEYPAD (0x7E00A000) -#define S3C64XX_PA_ADC (0x7E00B000) -#define S3C64XX_PA_SYSCON (0x7E00F000) -#define S3C64XX_PA_AC97 (0x7F001000) -#define S3C64XX_PA_IIS0 (0x7F002000) -#define S3C64XX_PA_IIS1 (0x7F003000) -#define S3C64XX_PA_TIMER (0x7F006000) -#define S3C64XX_PA_IIC0 (0x7F004000) -#define S3C64XX_PA_SPI0 (0x7F00B000) -#define S3C64XX_PA_SPI1 (0x7F00C000) -#define S3C64XX_PA_PCM0 (0x7F009000) -#define S3C64XX_PA_PCM1 (0x7F00A000) -#define S3C64XX_PA_IISV4 (0x7F00D000) -#define S3C64XX_PA_IIC1 (0x7F00F000) - -#define S3C64XX_PA_GPIO (0x7F008000) -#define S3C64XX_SZ_GPIO SZ_4K - -#define S3C64XX_PA_SDRAM (0x50000000) - -#define S3C64XX_PA_CFCON (0x70300000) - -#define S3C64XX_PA_VIC0 (0x71200000) -#define S3C64XX_PA_VIC1 (0x71300000) - -#define S3C64XX_PA_MODEM (0x74108000) - -#define S3C64XX_PA_USBHOST (0x74300000) - -#define S3C64XX_PA_USB_HSPHY (0x7C100000) - -/* compatibiltiy defines. */ -#define S3C_PA_TIMER S3C64XX_PA_TIMER -#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 -#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 -#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 -#define S3C_PA_IIC S3C64XX_PA_IIC0 -#define S3C_PA_IIC1 S3C64XX_PA_IIC1 -#define S3C_PA_NAND S3C64XX_PA_NAND -#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0 -#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF -#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF -#define S3C_PA_FB S3C64XX_PA_FB -#define S3C_PA_USBHOST S3C64XX_PA_USBHOST -#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG -#define S3C_PA_RTC S3C64XX_PA_RTC -#define S3C_PA_WDT S3C64XX_PA_WATCHDOG -#define S3C_PA_SPI0 S3C64XX_PA_SPI0 -#define S3C_PA_SPI1 S3C64XX_PA_SPI1 - -#define SAMSUNG_PA_ADC S3C64XX_PA_ADC -#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON -#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD - -#endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/pm-core.h deleted file mode 100644 index fcf3dcab..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ /dev/null @@ -1,115 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <mach/regs-gpio.h> - -static inline void s3c_pm_debug_init_uart(void) -{ - u32 tmp = __raw_readl(S3C_PCLK_GATE); - - /* As a note, since the S3C64XX UARTs generally have multiple - * clock sources, we simply enable PCLK at the moment and hope - * that the resume settings for the UART are suitable for the - * use with PCLK. - */ - - tmp |= S3C_CLKCON_PCLK_UART0; - tmp |= S3C_CLKCON_PCLK_UART1; - tmp |= S3C_CLKCON_PCLK_UART2; - tmp |= S3C_CLKCON_PCLK_UART3; - - __raw_writel(tmp, S3C_PCLK_GATE); - udelay(10); -} - -static inline void s3c_pm_arch_prepare_irqs(void) -{ - /* VIC should have already been taken care of */ - - /* clear any pending EINT0 interrupts */ - __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND); -} - -static inline void s3c_pm_arch_stop_clocks(void) -{ -} - -static inline void s3c_pm_arch_show_resume_irqs(void) -{ -} - -/* make these defines, we currently do not have any need to change - * the IRQ wake controls depending on the CPU we are running on */ - -#define s3c_irqwake_eintallow ((1 << 28) - 1) -#define s3c_irqwake_intallow (~0) - -static inline void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save) -{ - u32 ucon = __raw_readl(regs + S3C2410_UCON); - u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK; - u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK; - u32 new_ucon; - u32 delta; - - /* S3C64XX UART blocks only support level interrupts, so ensure that - * when we restore unused UART blocks we force the level interrupt - * settigs. */ - save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL; - - /* We have a constraint on changing the clock type of the UART - * between UCLKx and PCLK, so ensure that when we restore UCON - * that the CLK field is correctly modified if the bootloader - * has changed anything. - */ - if (ucon_clk != save_clk) { - new_ucon = save->ucon; - delta = ucon_clk ^ save_clk; - - /* change from UCLKx => wrong PCLK, - * either UCLK can be tested for by a bit-test - * with UCLK0 */ - if (ucon_clk & S3C6400_UCON_UCLK0 && - !(save_clk & S3C6400_UCON_UCLK0) && - delta & S3C6400_UCON_PCLK2) { - new_ucon &= ~S3C6400_UCON_UCLK0; - } else if (delta == S3C6400_UCON_PCLK2) { - /* as an precaution, don't change from - * PCLK2 => PCLK or vice-versa */ - new_ucon ^= S3C6400_UCON_PCLK2; - } - - S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n", - ucon, new_ucon, save->ucon); - save->ucon = new_ucon; - } -} - -static inline void s3c_pm_restored_gpios(void) -{ - /* ensure sleep mode has been cleared from the system */ - - __raw_writel(0, S3C64XX_SLPEN); -} - -static inline void samsung_pm_saved_gpios(void) -{ - /* turn on the sleep mode and keep it there, as it seems that during - * suspend the xCON registers get re-set and thus you can end up with - * problems between going to sleep and resuming. - */ - - __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); -} diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-clock.h deleted file mode 100644 index 05332b99..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-clock.h +++ /dev/null @@ -1,162 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_CLOCK_H -#define __PLAT_REGS_CLOCK_H __FILE__ - -#define S3C_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S3C_APLL_LOCK S3C_CLKREG(0x00) -#define S3C_MPLL_LOCK S3C_CLKREG(0x04) -#define S3C_EPLL_LOCK S3C_CLKREG(0x08) -#define S3C_APLL_CON S3C_CLKREG(0x0C) -#define S3C_MPLL_CON S3C_CLKREG(0x10) -#define S3C_EPLL_CON0 S3C_CLKREG(0x14) -#define S3C_EPLL_CON1 S3C_CLKREG(0x18) -#define S3C_CLK_SRC S3C_CLKREG(0x1C) -#define S3C_CLK_DIV0 S3C_CLKREG(0x20) -#define S3C_CLK_DIV1 S3C_CLKREG(0x24) -#define S3C_CLK_DIV2 S3C_CLKREG(0x28) -#define S3C_CLK_OUT S3C_CLKREG(0x2C) -#define S3C_HCLK_GATE S3C_CLKREG(0x30) -#define S3C_PCLK_GATE S3C_CLKREG(0x34) -#define S3C_SCLK_GATE S3C_CLKREG(0x38) -#define S3C_MEM0_GATE S3C_CLKREG(0x3C) -#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) -#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) - -/* CLKDIV0 */ -#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) -#define S3C6400_CLKDIV0_PCLK_SHIFT (12) -#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) -#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) -#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) -#define S3C6400_CLKDIV0_HCLK_SHIFT (8) -#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) -#define S3C6400_CLKDIV0_MPLL_SHIFT (4) - -#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) -#define S3C6400_CLKDIV0_ARM_SHIFT (0) - -/* HCLK GATE Registers */ -#define S3C_CLKCON_HCLK_3DSE (1<<31) -#define S3C_CLKCON_HCLK_UHOST (1<<29) -#define S3C_CLKCON_HCLK_SECUR (1<<28) -#define S3C_CLKCON_HCLK_SDMA1 (1<<27) -#define S3C_CLKCON_HCLK_SDMA0 (1<<26) -#define S3C_CLKCON_HCLK_IROM (1<<25) -#define S3C_CLKCON_HCLK_DDR1 (1<<24) -#define S3C_CLKCON_HCLK_DDR0 (1<<23) -#define S3C_CLKCON_HCLK_MEM1 (1<<22) -#define S3C_CLKCON_HCLK_MEM0 (1<<21) -#define S3C_CLKCON_HCLK_USB (1<<20) -#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) -#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) -#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) -#define S3C_CLKCON_HCLK_MDP (1<<16) -#define S3C_CLKCON_HCLK_DHOST (1<<15) -#define S3C_CLKCON_HCLK_IHOST (1<<14) -#define S3C_CLKCON_HCLK_DMA1 (1<<13) -#define S3C_CLKCON_HCLK_DMA0 (1<<12) -#define S3C_CLKCON_HCLK_JPEG (1<<11) -#define S3C_CLKCON_HCLK_CAMIF (1<<10) -#define S3C_CLKCON_HCLK_SCALER (1<<9) -#define S3C_CLKCON_HCLK_2D (1<<8) -#define S3C_CLKCON_HCLK_TV (1<<7) -#define S3C_CLKCON_HCLK_POST0 (1<<5) -#define S3C_CLKCON_HCLK_ROT (1<<4) -#define S3C_CLKCON_HCLK_LCD (1<<3) -#define S3C_CLKCON_HCLK_TZIC (1<<2) -#define S3C_CLKCON_HCLK_INTC (1<<1) -#define S3C_CLKCON_HCLK_MFC (1<<0) - -/* PCLK GATE Registers */ -#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) -#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) -#define S3C_CLKCON_PCLK_SKEY (1<<24) -#define S3C_CLKCON_PCLK_CHIPID (1<<23) -#define S3C_CLKCON_PCLK_SPI1 (1<<22) -#define S3C_CLKCON_PCLK_SPI0 (1<<21) -#define S3C_CLKCON_PCLK_HSIRX (1<<20) -#define S3C_CLKCON_PCLK_HSITX (1<<19) -#define S3C_CLKCON_PCLK_GPIO (1<<18) -#define S3C_CLKCON_PCLK_IIC (1<<17) -#define S3C_CLKCON_PCLK_IIS1 (1<<16) -#define S3C_CLKCON_PCLK_IIS0 (1<<15) -#define S3C_CLKCON_PCLK_AC97 (1<<14) -#define S3C_CLKCON_PCLK_TZPC (1<<13) -#define S3C_CLKCON_PCLK_TSADC (1<<12) -#define S3C_CLKCON_PCLK_KEYPAD (1<<11) -#define S3C_CLKCON_PCLK_IRDA (1<<10) -#define S3C_CLKCON_PCLK_PCM1 (1<<9) -#define S3C_CLKCON_PCLK_PCM0 (1<<8) -#define S3C_CLKCON_PCLK_PWM (1<<7) -#define S3C_CLKCON_PCLK_RTC (1<<6) -#define S3C_CLKCON_PCLK_WDT (1<<5) -#define S3C_CLKCON_PCLK_UART3 (1<<4) -#define S3C_CLKCON_PCLK_UART2 (1<<3) -#define S3C_CLKCON_PCLK_UART1 (1<<2) -#define S3C_CLKCON_PCLK_UART0 (1<<1) -#define S3C_CLKCON_PCLK_MFC (1<<0) - -/* SCLK GATE Registers */ -#define S3C_CLKCON_SCLK_UHOST (1<<30) -#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) -#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) -#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) -#define S3C_CLKCON_SCLK_MMC2 (1<<26) -#define S3C_CLKCON_SCLK_MMC1 (1<<25) -#define S3C_CLKCON_SCLK_MMC0 (1<<24) -#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) -#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) -#define S3C_CLKCON_SCLK_SPI1 (1<<21) -#define S3C_CLKCON_SCLK_SPI0 (1<<20) -#define S3C_CLKCON_SCLK_DAC27 (1<<19) -#define S3C_CLKCON_SCLK_TV27 (1<<18) -#define S3C_CLKCON_SCLK_SCALER27 (1<<17) -#define S3C_CLKCON_SCLK_SCALER (1<<16) -#define S3C_CLKCON_SCLK_LCD27 (1<<15) -#define S3C_CLKCON_SCLK_LCD (1<<14) -#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) -#define S3C6410_CLKCON_FIMC (1<<13) -#define S3C_CLKCON_SCLK_POST0_27 (1<<12) -#define S3C6400_CLKCON_SCLK_POST1 (1<<11) -#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) -#define S3C_CLKCON_SCLK_POST0 (1<<10) -#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) -#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) -#define S3C_CLKCON_SCLK_SECUR (1<<7) -#define S3C_CLKCON_SCLK_IRDA (1<<6) -#define S3C_CLKCON_SCLK_UART (1<<5) -#define S3C_CLKCON_SCLK_ONENAND (1<<4) -#define S3C_CLKCON_SCLK_MFC (1<<3) -#define S3C_CLKCON_SCLK_CAM (1<<2) -#define S3C_CLKCON_SCLK_JPEG (1<<1) - -/* CLKSRC */ - -#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) -#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) -#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) -#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) -#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) -#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) -#define S3C6400_CLKSRC_MFC (1 << 4) - -/* MEM_SYS_CFG */ -#define MEM_SYS_CFG_INDEP_CF 0x4000 -#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30 - -#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h deleted file mode 100644 index 82342f6f..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIO memory port register definitions - */ - -#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H -#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__ - -#define S3C64XX_MEM0CONSTOP S3C64XX_GPIOREG(0x1B0) -#define S3C64XX_MEM1CONSTOP S3C64XX_GPIOREG(0x1B4) - -#define S3C64XX_MEM0CONSLP0 S3C64XX_GPIOREG(0x1C0) -#define S3C64XX_MEM0CONSLP1 S3C64XX_GPIOREG(0x1C4) -#define S3C64XX_MEM1CONSLP S3C64XX_GPIOREG(0x1C8) - -#define S3C64XX_MEM0DRVCON S3C64XX_GPIOREG(0x1D0) -#define S3C64XX_MEM1DRVCON S3C64XX_GPIOREG(0x1D4) - -#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */ - diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h deleted file mode 100644 index 81f7f6e6..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h +++ /dev/null @@ -1,187 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIO register definitions - */ - -#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H -#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__ - -/* Base addresses for each of the banks */ - -#define S3C64XX_GPIOREG(reg) (S3C64XX_VA_GPIO + (reg)) - -#define S3C64XX_GPA_BASE S3C64XX_GPIOREG(0x0000) -#define S3C64XX_GPB_BASE S3C64XX_GPIOREG(0x0020) -#define S3C64XX_GPC_BASE S3C64XX_GPIOREG(0x0040) -#define S3C64XX_GPD_BASE S3C64XX_GPIOREG(0x0060) -#define S3C64XX_GPE_BASE S3C64XX_GPIOREG(0x0080) -#define S3C64XX_GPF_BASE S3C64XX_GPIOREG(0x00A0) -#define S3C64XX_GPG_BASE S3C64XX_GPIOREG(0x00C0) -#define S3C64XX_GPH_BASE S3C64XX_GPIOREG(0x00E0) -#define S3C64XX_GPI_BASE S3C64XX_GPIOREG(0x0100) -#define S3C64XX_GPJ_BASE S3C64XX_GPIOREG(0x0120) -#define S3C64XX_GPK_BASE S3C64XX_GPIOREG(0x0800) -#define S3C64XX_GPL_BASE S3C64XX_GPIOREG(0x0810) -#define S3C64XX_GPM_BASE S3C64XX_GPIOREG(0x0820) -#define S3C64XX_GPN_BASE S3C64XX_GPIOREG(0x0830) -#define S3C64XX_GPO_BASE S3C64XX_GPIOREG(0x0140) -#define S3C64XX_GPP_BASE S3C64XX_GPIOREG(0x0160) -#define S3C64XX_GPQ_BASE S3C64XX_GPIOREG(0x0180) - -/* SPCON */ - -#define S3C64XX_SPCON S3C64XX_GPIOREG(0x1A0) - -#define S3C64XX_SPCON_DRVCON_CAM_MASK (0x3 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_SHIFT (30) -#define S3C64XX_SPCON_DRVCON_CAM_2mA (0x0 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_4mA (0x1 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_7mA (0x2 << 30) -#define S3C64XX_SPCON_DRVCON_CAM_9mA (0x3 << 30) - -#define S3C64XX_SPCON_DRVCON_HSSPI_MASK (0x3 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT (28) -#define S3C64XX_SPCON_DRVCON_HSSPI_2mA (0x0 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_4mA (0x1 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_7mA (0x2 << 28) -#define S3C64XX_SPCON_DRVCON_HSSPI_9mA (0x3 << 28) - -#define S3C64XX_SPCON_DRVCON_HSMMC_MASK (0x3 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT (26) -#define S3C64XX_SPCON_DRVCON_HSMMC_2mA (0x0 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_4mA (0x1 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_7mA (0x2 << 26) -#define S3C64XX_SPCON_DRVCON_HSMMC_9mA (0x3 << 26) - -#define S3C64XX_SPCON_DRVCON_LCD_MASK (0x3 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_SHIFT (24) -#define S3C64XX_SPCON_DRVCON_LCD_2mA (0x0 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_4mA (0x1 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_7mA (0x2 << 24) -#define S3C64XX_SPCON_DRVCON_LCD_9mA (0x3 << 24) - -#define S3C64XX_SPCON_DRVCON_MODEM_MASK (0x3 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT (22) -#define S3C64XX_SPCON_DRVCON_MODEM_2mA (0x0 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_4mA (0x1 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_7mA (0x2 << 22) -#define S3C64XX_SPCON_DRVCON_MODEM_9mA (0x3 << 22) - -#define S3C64XX_SPCON_nRSTOUT_OEN (1 << 21) - -#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK (0x3 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT (18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA (0x0 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA (0x1 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA (0x2 << 18) -#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA (0x3 << 18) - -#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK (0x3 << 16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT (16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED (0x0 << 16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN (0x1 << 16) -#define S3C64XX_SPCON_MEM1_DQS_PUD_UP (0x2 << 16) - -#define S3C64XX_SPCON_MEM1_D_PUD1_MASK (0x3 << 14) -#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT (14) -#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED (0x0 << 14) -#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN (0x1 << 14) -#define S3C64XX_SPCON_MEM1_D_PUD1_UP (0x2 << 14) - -#define S3C64XX_SPCON_MEM1_D_PUD0_MASK (0x3 << 12) -#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT (12) -#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED (0x0 << 12) -#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN (0x1 << 12) -#define S3C64XX_SPCON_MEM1_D_PUD0_UP (0x2 << 12) - -#define S3C64XX_SPCON_MEM0_D_PUD_MASK (0x3 << 8) -#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT (8) -#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED (0x0 << 8) -#define S3C64XX_SPCON_MEM0_D_PUD_DOWN (0x1 << 8) -#define S3C64XX_SPCON_MEM0_D_PUD_UP (0x2 << 8) - -#define S3C64XX_SPCON_USBH_DMPD (1 << 7) -#define S3C64XX_SPCON_USBH_DPPD (1 << 6) -#define S3C64XX_SPCON_USBH_PUSW2 (1 << 5) -#define S3C64XX_SPCON_USBH_PUSW1 (1 << 4) -#define S3C64XX_SPCON_USBH_SUSPND (1 << 3) - -#define S3C64XX_SPCON_LCD_SEL_MASK (0x3 << 0) -#define S3C64XX_SPCON_LCD_SEL_SHIFT (0) -#define S3C64XX_SPCON_LCD_SEL_HOST (0x0 << 0) -#define S3C64XX_SPCON_LCD_SEL_RGB (0x1 << 0) -#define S3C64XX_SPCON_LCD_SEL_606_656 (0x2 << 0) - - -/* External interrupt registers */ - -#define S3C64XX_EINT12CON S3C64XX_GPIOREG(0x200) -#define S3C64XX_EINT34CON S3C64XX_GPIOREG(0x204) -#define S3C64XX_EINT56CON S3C64XX_GPIOREG(0x208) -#define S3C64XX_EINT78CON S3C64XX_GPIOREG(0x20C) -#define S3C64XX_EINT9CON S3C64XX_GPIOREG(0x210) - -#define S3C64XX_EINT12FLTCON S3C64XX_GPIOREG(0x220) -#define S3C64XX_EINT34FLTCON S3C64XX_GPIOREG(0x224) -#define S3C64XX_EINT56FLTCON S3C64XX_GPIOREG(0x228) -#define S3C64XX_EINT78FLTCON S3C64XX_GPIOREG(0x22C) -#define S3C64XX_EINT9FLTCON S3C64XX_GPIOREG(0x230) - -#define S3C64XX_EINT12MASK S3C64XX_GPIOREG(0x240) -#define S3C64XX_EINT34MASK S3C64XX_GPIOREG(0x244) -#define S3C64XX_EINT56MASK S3C64XX_GPIOREG(0x248) -#define S3C64XX_EINT78MASK S3C64XX_GPIOREG(0x24C) -#define S3C64XX_EINT9MASK S3C64XX_GPIOREG(0x250) - -#define S3C64XX_EINT12PEND S3C64XX_GPIOREG(0x260) -#define S3C64XX_EINT34PEND S3C64XX_GPIOREG(0x264) -#define S3C64XX_EINT56PEND S3C64XX_GPIOREG(0x268) -#define S3C64XX_EINT78PEND S3C64XX_GPIOREG(0x26C) -#define S3C64XX_EINT9PEND S3C64XX_GPIOREG(0x270) - -#define S3C64XX_PRIORITY S3C64XX_GPIOREG(0x280) -#define S3C64XX_PRIORITY_ARB(x) (1 << (x)) - -#define S3C64XX_SERVICE S3C64XX_GPIOREG(0x284) -#define S3C64XX_SERVICEPEND S3C64XX_GPIOREG(0x288) - -#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900) -#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904) -#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910) -#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914) -#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918) -#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C) - -#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920) -#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924) - -/* GPIO sleep configuration */ - -#define S3C64XX_SPCONSLP S3C64XX_GPIOREG(0x880) - -#define S3C64XX_SPCONSLP_TDO_PULLDOWN (1 << 14) -#define S3C64XX_SPCONSLP_CKE1INIT (1 << 5) - -#define S3C64XX_SPCONSLP_RSTOUT_MASK (0x3 << 12) -#define S3C64XX_SPCONSLP_RSTOUT_OUT0 (0x0 << 12) -#define S3C64XX_SPCONSLP_RSTOUT_OUT1 (0x1 << 12) -#define S3C64XX_SPCONSLP_RSTOUT_HIZ (0x2 << 12) - -#define S3C64XX_SPCONSLP_KPCOL_MASK (0x3 << 0) -#define S3C64XX_SPCONSLP_KPCOL_OUT0 (0x0 << 0) -#define S3C64XX_SPCONSLP_KPCOL_OUT1 (0x1 << 0) -#define S3C64XX_SPCONSLP_KPCOL_INP (0x2 << 0) - - -#define S3C64XX_SLPEN S3C64XX_GPIOREG(0x930) - -#define S3C64XX_SLPEN_USE_xSLP (1 << 0) -#define S3C64XX_SLPEN_CFG_BYSLPEN (1 << 1) - -#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */ - diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-irq.h deleted file mode 100644 index bcce68a0..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-irq.h +++ /dev/null @@ -1,20 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <asm/hardware/vic.h> - -#endif /* __ASM_ARCH_6400_REGS_IRQ_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-modem.h deleted file mode 100644 index 49f7759d..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-modem.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - modem block registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C64XX_REGS_MODEM_H -#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__ - -#define S3C64XX_MODEMREG(x) (S3C64XX_VA_MODEM + (x)) - -#define S3C64XX_MODEM_INT2AP S3C64XX_MODEMREG(0x0) -#define S3C64XX_MODEM_INT2MODEM S3C64XX_MODEMREG(0x4) -#define S3C64XX_MODEM_MIFCON S3C64XX_MODEMREG(0x8) -#define S3C64XX_MODEM_MIFPCON S3C64XX_MODEMREG(0xC) -#define S3C64XX_MODEM_INTCLR S3C64XX_MODEMREG(0x10) -#define S3C64XX_MODEM_DMA_TXADDR S3C64XX_MODEMREG(0x14) -#define S3C64XX_MODEM_DMA_RXADDR S3C64XX_MODEMREG(0x18) - -#define MIFPCON_INT2M_LEVEL (1 << 4) -#define MIFPCON_LCD_BYPASS (1 << 3) - -#endif /* __PLAT_S3C64XX_REGS_MODEM_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-srom.h deleted file mode 100644 index 756731b3..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-srom.h +++ /dev/null @@ -1,59 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h - * - * Copyright 2009 Andy Green <andy@warmcat.com> - * - * S3C64XX SROM definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_SROM_H -#define __PLAT_REGS_SROM_H __FILE__ - -#define S3C64XX_SROMREG(x) (S3C_VA_MEM + (x)) - -#define S3C64XX_SROM_BW S3C64XX_SROMREG(0) -#define S3C64XX_SROM_BC0 S3C64XX_SROMREG(4) -#define S3C64XX_SROM_BC1 S3C64XX_SROMREG(8) -#define S3C64XX_SROM_BC2 S3C64XX_SROMREG(0xc) -#define S3C64XX_SROM_BC3 S3C64XX_SROMREG(0x10) -#define S3C64XX_SROM_BC4 S3C64XX_SROMREG(0x14) -#define S3C64XX_SROM_BC5 S3C64XX_SROMREG(0x18) - -/* - * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4 - */ - -#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT 0 -#define S3C64XX_SROM_BW__WAITENABLE__SHIFT 2 -#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT 3 -#define S3C64XX_SROM_BW__CS_MASK 0xf - -#define S3C64XX_SROM_BW__NCS0__SHIFT 0 -#define S3C64XX_SROM_BW__NCS1__SHIFT 4 -#define S3C64XX_SROM_BW__NCS2__SHIFT 8 -#define S3C64XX_SROM_BW__NCS3__SHIFT 0xc -#define S3C64XX_SROM_BW__NCS4__SHIFT 0x10 - -/* - * applies to same to BCS0 - BCS4 - */ - -#define S3C64XX_SROM_BCX__PMC__SHIFT 0 -#define S3C64XX_SROM_BCX__PMC__MASK 3 -#define S3C64XX_SROM_BCX__TACP__SHIFT 4 -#define S3C64XX_SROM_BCX__TACP__MASK 0xf -#define S3C64XX_SROM_BCX__TCAH__SHIFT 8 -#define S3C64XX_SROM_BCX__TCAH__MASK 0xf -#define S3C64XX_SROM_BCX__TCOH__SHIFT 12 -#define S3C64XX_SROM_BCX__TCOH__MASK 0xf -#define S3C64XX_SROM_BCX__TACC__SHIFT 16 -#define S3C64XX_SROM_BCX__TACC__MASK 0x1f -#define S3C64XX_SROM_BCX__TCOS__SHIFT 24 -#define S3C64XX_SROM_BCX__TCOS__MASK 0xf -#define S3C64XX_SROM_BCX__TACS__SHIFT 28 -#define S3C64XX_SROM_BCX__TACS__MASK 0xf - -#endif /* _PLAT_REGS_SROM_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-sys.h deleted file mode 100644 index b91e0209..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ /dev/null @@ -1,31 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX system register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_REGS_SYS_H -#define __PLAT_REGS_SYS_H __FILE__ - -#define S3C_SYSREG(x) (S3C_VA_SYS + (x)) - -#define S3C64XX_AHB_CON0 S3C_SYSREG(0x100) -#define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) -#define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) - -#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) - -#define S3C64XX_OTHERS S3C_SYSREG(0x900) - -#define S3C64XX_OTHERS_USBMASK (1 << 16) -#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) - -#endif /* _PLAT_REGS_SYS_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h deleted file mode 100644 index 270d96ac..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h +++ /dev/null @@ -1,116 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - syscon power and sleep control registers - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H -#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__ - -#define S3C64XX_PWR_CFG S3C_SYSREG(0x804) - -#define S3C64XX_PWRCFG_OSC_OTG_DISABLE (1 << 17) -#define S3C64XX_PWRCFG_MMC2_DISABLE (1 << 16) -#define S3C64XX_PWRCFG_MMC1_DISABLE (1 << 15) -#define S3C64XX_PWRCFG_MMC0_DISABLE (1 << 14) -#define S3C64XX_PWRCFG_HSI_DISABLE (1 << 13) -#define S3C64XX_PWRCFG_TS_DISABLE (1 << 12) -#define S3C64XX_PWRCFG_RTC_TICK_DISABLE (1 << 11) -#define S3C64XX_PWRCFG_RTC_ALARM_DISABLE (1 << 10) -#define S3C64XX_PWRCFG_MSM_DISABLE (1 << 9) -#define S3C64XX_PWRCFG_KEY_DISABLE (1 << 8) -#define S3C64XX_PWRCFG_BATF_DISABLE (1 << 7) - -#define S3C64XX_PWRCFG_CFG_WFI_MASK (0x3 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_SHIFT (5) -#define S3C64XX_PWRCFG_CFG_WFI_IGNORE (0x0 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_IDLE (0x1 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_STOP (0x2 << 5) -#define S3C64XX_PWRCFG_CFG_WFI_SLEEP (0x3 << 5) - -#define S3C64XX_PWRCFG_CFG_BATFLT_MASK (0x3 << 3) -#define S3C64XX_PWRCFG_CFG_BATFLT_SHIFT (3) -#define S3C64XX_PWRCFG_CFG_BATFLT_IGNORE (0x0 << 3) -#define S3C64XX_PWRCFG_CFG_BATFLT_IRQ (0x1 << 3) -#define S3C64XX_PWRCFG_CFG_BATFLT_SLEEP (0x3 << 3) - -#define S3C64XX_PWRCFG_CFG_BAT_WAKE (1 << 2) -#define S3C64XX_PWRCFG_OSC27_EN (1 << 0) - -#define S3C64XX_EINT_MASK S3C_SYSREG(0x808) - -#define S3C64XX_NORMAL_CFG S3C_SYSREG(0x810) - -#define S3C64XX_NORMALCFG_IROM_ON (1 << 30) -#define S3C64XX_NORMALCFG_DOMAIN_ETM_ON (1 << 16) -#define S3C64XX_NORMALCFG_DOMAIN_S_ON (1 << 15) -#define S3C64XX_NORMALCFG_DOMAIN_F_ON (1 << 14) -#define S3C64XX_NORMALCFG_DOMAIN_P_ON (1 << 13) -#define S3C64XX_NORMALCFG_DOMAIN_I_ON (1 << 12) -#define S3C64XX_NORMALCFG_DOMAIN_G_ON (1 << 10) -#define S3C64XX_NORMALCFG_DOMAIN_V_ON (1 << 9) - -#define S3C64XX_STOP_CFG S3C_SYSREG(0x814) - -#define S3C64XX_STOPCFG_MEMORY_ARM_ON (1 << 29) -#define S3C64XX_STOPCFG_TOP_MEMORY_ON (1 << 20) -#define S3C64XX_STOPCFG_ARM_LOGIC_ON (1 << 17) -#define S3C64XX_STOPCFG_TOP_LOGIC_ON (1 << 8) -#define S3C64XX_STOPCFG_OSC_EN (1 << 0) - -#define S3C64XX_SLEEP_CFG S3C_SYSREG(0x818) - -#define S3C64XX_SLEEPCFG_OSC_EN (1 << 0) - -#define S3C64XX_STOP_MEM_CFG S3C_SYSREG(0x81c) - -#define S3C64XX_STOPMEMCFG_MODEMIF_RETAIN (1 << 6) -#define S3C64XX_STOPMEMCFG_HOSTIF_RETAIN (1 << 5) -#define S3C64XX_STOPMEMCFG_OTG_RETAIN (1 << 4) -#define S3C64XX_STOPMEMCFG_HSMCC_RETAIN (1 << 3) -#define S3C64XX_STOPMEMCFG_IROM_RETAIN (1 << 2) -#define S3C64XX_STOPMEMCFG_IRDA_RETAIN (1 << 1) -#define S3C64XX_STOPMEMCFG_NFCON_RETAIN (1 << 0) - -#define S3C64XX_OSC_STABLE S3C_SYSREG(0x824) -#define S3C64XX_PWR_STABLE S3C_SYSREG(0x828) - -#define S3C64XX_WAKEUP_STAT S3C_SYSREG(0x908) - -#define S3C64XX_WAKEUPSTAT_MMC2 (1 << 11) -#define S3C64XX_WAKEUPSTAT_MMC1 (1 << 10) -#define S3C64XX_WAKEUPSTAT_MMC0 (1 << 9) -#define S3C64XX_WAKEUPSTAT_HSI (1 << 8) -#define S3C64XX_WAKEUPSTAT_BATFLT (1 << 6) -#define S3C64XX_WAKEUPSTAT_MSM (1 << 5) -#define S3C64XX_WAKEUPSTAT_KEY (1 << 4) -#define S3C64XX_WAKEUPSTAT_TS (1 << 3) -#define S3C64XX_WAKEUPSTAT_RTC_TICK (1 << 2) -#define S3C64XX_WAKEUPSTAT_RTC_ALARM (1 << 1) -#define S3C64XX_WAKEUPSTAT_EINT (1 << 0) - -#define S3C64XX_BLK_PWR_STAT S3C_SYSREG(0x90c) - -#define S3C64XX_BLKPWRSTAT_G (1 << 7) -#define S3C64XX_BLKPWRSTAT_ETM (1 << 6) -#define S3C64XX_BLKPWRSTAT_S (1 << 5) -#define S3C64XX_BLKPWRSTAT_F (1 << 4) -#define S3C64XX_BLKPWRSTAT_P (1 << 3) -#define S3C64XX_BLKPWRSTAT_I (1 << 2) -#define S3C64XX_BLKPWRSTAT_V (1 << 1) -#define S3C64XX_BLKPWRSTAT_TOP (1 << 0) - -#define S3C64XX_INFORM0 S3C_SYSREG(0xA00) -#define S3C64XX_INFORM1 S3C_SYSREG(0xA04) -#define S3C64XX_INFORM2 S3C_SYSREG(0xA08) -#define S3C64XX_INFORM3 S3C_SYSREG(0xA0C) - -#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h deleted file mode 100644 index 9d0c43b4..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h - * - * Copyright (C) 2009 Samsung Electronics Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S3C64XX_PLAT_SPI_CLKS_H -#define __S3C64XX_PLAT_SPI_CLKS_H __FILE__ - -#define S3C64XX_SPI_SRCCLK_PCLK 0 -#define S3C64XX_SPI_SRCCLK_SPIBUS 1 -#define S3C64XX_SPI_SRCCLK_48M 2 - -#endif /* __S3C64XX_PLAT_SPI_CLKS_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/tick.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/tick.h deleted file mode 100644 index ebe18a94..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/tick.h +++ /dev/null @@ -1,29 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/tick.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C64XX - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -/* note, the timer interrutps turn up in 2 places, the vic and then - * the timer block. We take the VIC as the base at the moment. - */ -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/timex.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/timex.h deleted file mode 100644 index fb2e8cd4..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s3c64xx/include/mach/timex.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/uncompress.h b/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/uncompress.h deleted file mode 100644 index c6a82a20..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-s3c64xx/include/mach/uncompress.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c6400/include/mach/uncompress.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C6400 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ - fifo_mask = S3C2440_UFSTAT_TXMASK; - fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT; -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ |