diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c | 741 |
1 files changed, 0 insertions, 741 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c b/ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c deleted file mode 100644 index c3ed15b8..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-orion5x/dns323-setup.c +++ /dev/null @@ -1,741 +0,0 @@ -/* - * arch/arm/mach-orion5x/dns323-setup.c - * - * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> - * - * Support for HW Rev C1: - * - * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/phy.h> -#include <linux/marvell_phy.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <asm/system_info.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/* Rev A1 and B1 */ -#define DNS323_GPIO_LED_RIGHT_AMBER 1 -#define DNS323_GPIO_LED_LEFT_AMBER 2 -#define DNS323_GPIO_SYSTEM_UP 3 -#define DNS323_GPIO_LED_POWER1 4 -#define DNS323_GPIO_LED_POWER2 5 -#define DNS323_GPIO_OVERTEMP 6 -#define DNS323_GPIO_RTC 7 -#define DNS323_GPIO_POWER_OFF 8 -#define DNS323_GPIO_KEY_POWER 9 -#define DNS323_GPIO_KEY_RESET 10 - -/* Rev C1 */ -#define DNS323C_GPIO_KEY_POWER 1 -#define DNS323C_GPIO_POWER_OFF 2 -#define DNS323C_GPIO_LED_RIGHT_AMBER 8 -#define DNS323C_GPIO_LED_LEFT_AMBER 9 -#define DNS323C_GPIO_LED_POWER 17 -#define DNS323C_GPIO_FAN_BIT1 18 -#define DNS323C_GPIO_FAN_BIT0 19 - -/* Exposed to userspace, do not change */ -enum { - DNS323_REV_A1, /* 0 */ - DNS323_REV_B1, /* 1 */ - DNS323_REV_C1, /* 2 */ -}; - - -/**************************************************************************** - * PCI setup - */ - -static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci dns323_pci __initdata = { - .nr_controllers = 2, - .swizzle = pci_std_swizzle, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = dns323_pci_map_irq, -}; - -static int __init dns323_pci_init(void) -{ - /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI - * gets in the way of initialising the SATA controller. - */ - if (machine_is_dns323() && system_rev == DNS323_REV_A1) - pci_common_init(&dns323_pci); - - return 0; -} - -subsys_initcall(dns323_pci_init); - -/**************************************************************************** - * 8MiB NOR flash (Spansion S29GL064M90TFIR4) - * - * Layout as used by D-Link: - * 0x00000000-0x00010000 : "MTD1" - * 0x00010000-0x00020000 : "MTD2" - * 0x00020000-0x001a0000 : "Linux Kernel" - * 0x001a0000-0x007d0000 : "File System" - * 0x007d0000-0x00800000 : "u-boot" - */ - -#define DNS323_NOR_BOOT_BASE 0xf4000000 -#define DNS323_NOR_BOOT_SIZE SZ_8M - -static struct mtd_partition dns323_partitions[] = { - { - .name = "MTD1", - .size = 0x00010000, - .offset = 0, - }, { - .name = "MTD2", - .size = 0x00010000, - .offset = 0x00010000, - }, { - .name = "Linux Kernel", - .size = 0x00180000, - .offset = 0x00020000, - }, { - .name = "File System", - .size = 0x00630000, - .offset = 0x001A0000, - }, { - .name = "u-boot", - .size = 0x00030000, - .offset = 0x007d0000, - }, -}; - -static struct physmap_flash_data dns323_nor_flash_data = { - .width = 1, - .parts = dns323_partitions, - .nr_parts = ARRAY_SIZE(dns323_partitions) -}; - -static struct resource dns323_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = DNS323_NOR_BOOT_BASE, - .end = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device dns323_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &dns323_nor_flash_data, - }, - .resource = &dns323_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * Ethernet - */ - -static struct mv643xx_eth_platform_data dns323_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these - * functions be kept somewhere? - */ -static int __init dns323_parse_hex_nibble(char n) -{ - if (n >= '0' && n <= '9') - return n - '0'; - - if (n >= 'A' && n <= 'F') - return n - 'A' + 10; - - if (n >= 'a' && n <= 'f') - return n - 'a' + 10; - - return -1; -} - -static int __init dns323_parse_hex_byte(const char *b) -{ - int hi; - int lo; - - hi = dns323_parse_hex_nibble(b[0]); - lo = dns323_parse_hex_nibble(b[1]); - - if (hi < 0 || lo < 0) - return -1; - - return (hi << 4) | lo; -} - -static int __init dns323_read_mac_addr(void) -{ - u_int8_t addr[6]; - int i; - char *mac_page; - - /* MAC address is stored as a regular ol' string in /dev/mtdblock4 - * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80). - */ - mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024); - if (!mac_page) - return -ENOMEM; - - /* Sanity check the string we're looking at */ - for (i = 0; i < 5; i++) { - if (*(mac_page + (i * 3) + 2) != ':') { - goto error_fail; - } - } - - for (i = 0; i < 6; i++) { - int byte; - - byte = dns323_parse_hex_byte(mac_page + (i * 3)); - if (byte < 0) { - goto error_fail; - } - - addr[i] = byte; - } - - iounmap(mac_page); - printk("DNS-323: Found ethernet MAC address: "); - for (i = 0; i < 6; i++) - printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n"); - - memcpy(dns323_eth_data.mac_addr, addr, 6); - - return 0; - -error_fail: - iounmap(mac_page); - return -EINVAL; -} - -/**************************************************************************** - * GPIO LEDs (simple - doesn't use hardware blinking support) - */ - -#define ORION_BLINK_HALF_PERIOD 100 /* ms */ - -static int dns323_gpio_blink_set(unsigned gpio, int state, - unsigned long *delay_on, unsigned long *delay_off) -{ - - if (delay_on && delay_off && !*delay_on && !*delay_off) - *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; - - switch(state) { - case GPIO_LED_NO_BLINK_LOW: - case GPIO_LED_NO_BLINK_HIGH: - orion_gpio_set_blink(gpio, 0); - gpio_set_value(gpio, state); - break; - case GPIO_LED_BLINK: - orion_gpio_set_blink(gpio, 1); - } - return 0; -} - -static struct gpio_led dns323ab_leds[] = { - { - .name = "power:blue", - .gpio = DNS323_GPIO_LED_POWER2, - .default_trigger = "default-on", - }, { - .name = "right:amber", - .gpio = DNS323_GPIO_LED_RIGHT_AMBER, - .active_low = 1, - }, { - .name = "left:amber", - .gpio = DNS323_GPIO_LED_LEFT_AMBER, - .active_low = 1, - }, -}; - - -static struct gpio_led dns323c_leds[] = { - { - .name = "power:blue", - .gpio = DNS323C_GPIO_LED_POWER, - .default_trigger = "timer", - .active_low = 1, - }, { - .name = "right:amber", - .gpio = DNS323C_GPIO_LED_RIGHT_AMBER, - .active_low = 1, - }, { - .name = "left:amber", - .gpio = DNS323C_GPIO_LED_LEFT_AMBER, - .active_low = 1, - }, -}; - - -static struct gpio_led_platform_data dns323ab_led_data = { - .num_leds = ARRAY_SIZE(dns323ab_leds), - .leds = dns323ab_leds, - .gpio_blink_set = dns323_gpio_blink_set, -}; - -static struct gpio_led_platform_data dns323c_led_data = { - .num_leds = ARRAY_SIZE(dns323c_leds), - .leds = dns323c_leds, - .gpio_blink_set = dns323_gpio_blink_set, -}; - -static struct platform_device dns323_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &dns323ab_led_data, - }, -}; - -/**************************************************************************** - * GPIO Attached Keys - */ - -static struct gpio_keys_button dns323ab_buttons[] = { - { - .code = KEY_RESTART, - .gpio = DNS323_GPIO_KEY_RESET, - .desc = "Reset Button", - .active_low = 1, - }, { - .code = KEY_POWER, - .gpio = DNS323_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dns323ab_button_data = { - .buttons = dns323ab_buttons, - .nbuttons = ARRAY_SIZE(dns323ab_buttons), -}; - -static struct gpio_keys_button dns323c_buttons[] = { - { - .code = KEY_POWER, - .gpio = DNS323C_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data dns323c_button_data = { - .buttons = dns323c_buttons, - .nbuttons = ARRAY_SIZE(dns323c_buttons), -}; - -static struct platform_device dns323_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &dns323ab_button_data, - }, -}; - -/***************************************************************************** - * SATA - */ -static struct mv_sata_platform_data dns323_sata_data = { - .n_ports = 2, -}; - -/**************************************************************************** - * General Setup - */ -static unsigned int dns323a_mpp_modes[] __initdata = { - MPP0_PCIE_RST_OUTn, - MPP1_GPIO, /* right amber LED (sata ch0) */ - MPP2_GPIO, /* left amber LED (sata ch1) */ - MPP3_UNUSED, - MPP4_GPIO, /* power button LED */ - MPP5_GPIO, /* power button LED */ - MPP6_GPIO, /* GMT G751-2f overtemp */ - MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ - MPP8_GPIO, /* triggers power off */ - MPP9_GPIO, /* power button switch */ - MPP10_GPIO, /* reset button switch */ - MPP11_UNUSED, - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_UNUSED, - MPP15_UNUSED, - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static unsigned int dns323b_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_GPIO, /* right amber LED (sata ch0) */ - MPP2_GPIO, /* left amber LED (sata ch1) */ - MPP3_GPIO, /* system up flag */ - MPP4_GPIO, /* power button LED */ - MPP5_GPIO, /* power button LED */ - MPP6_GPIO, /* GMT G751-2f overtemp */ - MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ - MPP8_GPIO, /* triggers power off */ - MPP9_GPIO, /* power button switch */ - MPP10_GPIO, /* reset button switch */ - MPP11_UNUSED, - MPP12_SATA_LED, - MPP13_SATA_LED, - MPP14_SATA_LED, - MPP15_SATA_LED, - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static unsigned int dns323c_mpp_modes[] __initdata = { - MPP0_GPIO, /* ? input */ - MPP1_GPIO, /* input power switch (0 = pressed) */ - MPP2_GPIO, /* output power off */ - MPP3_UNUSED, /* ? output */ - MPP4_UNUSED, /* ? output */ - MPP5_UNUSED, /* ? output */ - MPP6_UNUSED, /* ? output */ - MPP7_UNUSED, /* ? output */ - MPP8_GPIO, /* i/o right amber LED */ - MPP9_GPIO, /* i/o left amber LED */ - MPP10_GPIO, /* input */ - MPP11_UNUSED, - MPP12_SATA_LED, - MPP13_SATA_LED, - MPP14_SATA_LED, - MPP15_SATA_LED, - MPP16_UNUSED, - MPP17_GPIO, /* power button LED */ - MPP18_GPIO, /* fan speed bit 0 */ - MPP19_GPIO, /* fan speed bit 1 */ - 0, -}; - -/* Rev C1 Fan speed notes: - * - * The fan is controlled by 2 GPIOs on this board. The settings - * of the bits is as follow: - * - * GPIO 18 GPIO 19 Fan - * - * 0 0 stopped - * 0 1 low speed - * 1 0 high speed - * 1 1 don't do that (*) - * - * (*) I think the two bits control two feed-in resistors into a fixed - * PWN circuit, setting both bits will basically go a 'bit' faster - * than high speed, but d-link doesn't do it and you may get out of - * HW spec so don't do it. - */ - -/* - * On the DNS-323 A1 and B1 the following devices are attached via I2C: - * - * i2c addr | chip | description - * 0x3e | GMT G760Af | fan speed PWM controller - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) - * 0x68 | ST M41T80 | RTC w/ alarm - */ -static struct i2c_board_info __initdata dns323ab_i2c_devices[] = { - { - I2C_BOARD_INFO("g760a", 0x3e), - }, { - I2C_BOARD_INFO("lm75", 0x48), - }, { - I2C_BOARD_INFO("m41t80", 0x68), - }, -}; - -/* - * On the DNS-323 C1 the following devices are attached via I2C: - * - * i2c addr | chip | description - * 0x48 | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible) - * 0x68 | ST M41T80 | RTC w/ alarm - */ -static struct i2c_board_info __initdata dns323c_i2c_devices[] = { - { - I2C_BOARD_INFO("lm75", 0x48), - }, { - I2C_BOARD_INFO("m41t80", 0x68), - }, -}; - -/* DNS-323 rev. A specific power off method */ -static void dns323a_power_off(void) -{ - pr_info("DNS-323: Triggering power-off...\n"); - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); -} - -/* DNS-323 rev B specific power off method */ -static void dns323b_power_off(void) -{ - pr_info("DNS-323: Triggering power-off...\n"); - /* Pin has to be changed to 1 and back to 0 to do actual power off. */ - gpio_set_value(DNS323_GPIO_POWER_OFF, 1); - mdelay(100); - gpio_set_value(DNS323_GPIO_POWER_OFF, 0); -} - -/* DNS-323 rev. C specific power off method */ -static void dns323c_power_off(void) -{ - pr_info("DNS-323: Triggering power-off...\n"); - gpio_set_value(DNS323C_GPIO_POWER_OFF, 1); -} - -static int dns323c_phy_fixup(struct phy_device *phy) -{ - phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS; - - return 0; -} - -static int __init dns323_identify_rev(void) -{ - u32 dev, rev, i, reg; - - pr_debug("DNS-323: Identifying board ... \n"); - - /* Rev A1 has a 5181 */ - orion5x_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID) { - pr_debug("DNS-323: 5181 found, board is A1\n"); - return DNS323_REV_A1; - } - pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n"); - - /* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is - * a bit gross but we want to do that without links into the eth - * driver so let's poke at it directly. We default to rev B1 in - * case the accesses fail - */ - -#define ETH_SMI_REG (ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004) -#define SMI_BUSY 0x10000000 -#define SMI_READ_VALID 0x08000000 -#define SMI_OPCODE_READ 0x04000000 -#define SMI_OPCODE_WRITE 0x00000000 - - for (i = 0; i < 1000; i++) { - reg = readl(ETH_SMI_REG); - if (!(reg & SMI_BUSY)) - break; - } - if (i >= 1000) { - pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n"); - return DNS323_REV_B1; - } - writel((3 << 21) /* phy ID reg */ | - (8 << 16) /* phy addr */ | - SMI_OPCODE_READ, ETH_SMI_REG); - for (i = 0; i < 1000; i++) { - reg = readl(ETH_SMI_REG); - if (reg & SMI_READ_VALID) - break; - } - if (i >= 1000) { - pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n"); - return DNS323_REV_B1; - } - pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff); - - /* Note: the Marvell tools mask the ID with 0x3f0 before comparison - * but I don't see that making a difference here, at least with - * any known Marvell PHY ID - */ - switch(reg & 0xfff0) { - case 0x0cc0: /* MV88E1111 */ - return DNS323_REV_B1; - case 0x0e10: /* MV88E1118 */ - return DNS323_REV_C1; - default: - pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n", - reg & 0xffff); - } - return DNS323_REV_B1; -} - -static void __init dns323_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - /* Identify revision */ - system_rev = dns323_identify_rev(); - pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev); - - /* Just to be tricky, the 5182 has a completely different - * set of MPP modes to the 5181. - */ - switch(system_rev) { - case DNS323_REV_A1: - orion5x_mpp_conf(dns323a_mpp_modes); - writel(0, MPP_DEV_CTRL); /* DEV_D[31:16] */ - break; - case DNS323_REV_B1: - orion5x_mpp_conf(dns323b_mpp_modes); - break; - case DNS323_REV_C1: - orion5x_mpp_conf(dns323c_mpp_modes); - break; - } - - /* setup flash mapping - * CS3 holds a 8 MB Spansion S29GL064M90TFIR4 - */ - orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE); - platform_device_register(&dns323_nor_flash); - - /* Sort out LEDs, Buttons and i2c devices */ - switch(system_rev) { - case DNS323_REV_A1: - /* The 5181 power LED is active low and requires - * DNS323_GPIO_LED_POWER1 to also be low. - */ - dns323ab_leds[0].active_low = 1; - gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable"); - gpio_direction_output(DNS323_GPIO_LED_POWER1, 0); - /* Fall through */ - case DNS323_REV_B1: - i2c_register_board_info(0, dns323ab_i2c_devices, - ARRAY_SIZE(dns323ab_i2c_devices)); - break; - case DNS323_REV_C1: - /* Hookup LEDs & Buttons */ - dns323_gpio_leds.dev.platform_data = &dns323c_led_data; - dns323_button_device.dev.platform_data = &dns323c_button_data; - - /* Hookup i2c devices and fan driver */ - i2c_register_board_info(0, dns323c_i2c_devices, - ARRAY_SIZE(dns323c_i2c_devices)); - platform_device_register_simple("dns323c-fan", 0, NULL, 0); - - /* Register fixup for the PHY LEDs */ - phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118, - MARVELL_PHY_ID_MASK, - dns323c_phy_fixup); - } - - platform_device_register(&dns323_gpio_leds); - platform_device_register(&dns323_button_device); - - /* - * Configure peripherals. - */ - if (dns323_read_mac_addr() < 0) - printk("DNS-323: Failed to read MAC address\n"); - orion5x_ehci0_init(); - orion5x_eth_init(&dns323_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - - /* Remaining GPIOs */ - switch(system_rev) { - case DNS323_REV_A1: - /* Poweroff GPIO */ - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS-323: failed to setup power-off GPIO\n"); - pm_power_off = dns323a_power_off; - break; - case DNS323_REV_B1: - /* 5182 built-in SATA init */ - orion5x_sata_init(&dns323_sata_data); - - /* The DNS323 rev B1 has flag to indicate the system is up. - * Without this flag set, power LED will flash and cannot be - * controlled via leds-gpio. - */ - if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0) - gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1); - - /* Poweroff GPIO */ - if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS-323: failed to setup power-off GPIO\n"); - pm_power_off = dns323b_power_off; - break; - case DNS323_REV_C1: - /* 5182 built-in SATA init */ - orion5x_sata_init(&dns323_sata_data); - - /* Poweroff GPIO */ - if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 || - gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0) - pr_err("DNS-323: failed to setup power-off GPIO\n"); - pm_power_off = dns323c_power_off; - - /* Now, -this- should theorically be done by the sata_mv driver - * once I figure out what's going on there. Maybe the behaviour - * of the LEDs should be somewhat passed via the platform_data. - * for now, just whack the register and make the LEDs happy - * - * Note: AFAIK, rev B1 needs the same treatement but I'll let - * somebody else test it. - */ - writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c); - break; - } -} - -/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ -MACHINE_START(DNS323, "D-Link DNS-323") - /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */ - .atag_offset = 0x100, - .init_machine = dns323_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END |