diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c | 135 |
1 files changed, 0 insertions, 135 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c b/ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c deleted file mode 100644 index 750805c5..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-omap2/opp2430_data.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * opp2430_data.c - old-style "OPP" table for OMAP2430 - * - * Copyright (C) 2005-2009 Texas Instruments, Inc. - * Copyright (C) 2004-2009 Nokia Corporation - * - * Richard Woodruff <r-woodruff2@ti.com> - * - * The OMAP2 processor can be run at several discrete 'PRCM configurations'. - * These configurations are characterized by voltage and speed for clocks. - * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratios' which the clocks operate with - * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) - * - * XXX Missing voltage data. - * XXX Missing 19.2MHz sys_clk rate sets. - * - * THe format described in this file is deprecated. Once a reasonable - * OPP API exists, the data in this file should be converted to use it. - * - * This is technically part of the OMAP2xxx clock code. - */ - -#include <plat/hardware.h> - -#include "opp2xxx.h" -#include "sdrc.h" -#include "clock.h" - -/* - * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM - * - * Filling in table based on 2430-SDPs variants available. There are - * quite a few more rate combinations which could be defined. - * - * When multiple values are defined the start up will try and choose - * the fastest one. If a 'fast' value is defined, then automatically, - * the /2 one should be included as it can be used. Generally having - * more than one fast set does not make sense, as static timings need - * to be changed to change the set. The exception is the bypass - * setting which is available for low power bypass. - * - * Note: This table needs to be sorted, fastest to slowest. - */ -const struct prcm_config omap2430_rate_table[] = { - /* PRCM #4 - ratio2 (ES2.1) - FAST */ - {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - FAST */ - {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - FAST */ - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - FAST */ - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM #4 - ratio1 (ES2.1) - SLOW */ - {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - SLOW */ - {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - SLOW */ - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - SLOW*/ - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; |