diff options
Diffstat (limited to 'ANDROID_3.4.5/arch/arm/mach-omap1/irq.c')
| -rw-r--r-- | ANDROID_3.4.5/arch/arm/mach-omap1/irq.c | 248 |
1 files changed, 0 insertions, 248 deletions
diff --git a/ANDROID_3.4.5/arch/arm/mach-omap1/irq.c b/ANDROID_3.4.5/arch/arm/mach-omap1/irq.c deleted file mode 100644 index 4448114f..00000000 --- a/ANDROID_3.4.5/arch/arm/mach-omap1/irq.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * linux/arch/arm/mach-omap1/irq.c - * - * Interrupt handler for all OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Written by Tony Lindgren <tony@atomide.com> - * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com> - * - * Completely re-written to support various OMAP chips with bank specific - * interrupt handlers. - * - * Some snippets of the code taken from the older OMAP interrupt handler - * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> - * - * GPIO interrupt handler moved to gpio.c by Juha Yrjola - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <asm/irq.h> -#include <asm/mach/irq.h> - -#include <plat/cpu.h> - -#include <mach/hardware.h> - -#define IRQ_BANK(irq) ((irq) >> 5) -#define IRQ_BIT(irq) ((irq) & 0x1f) - -struct omap_irq_bank { - unsigned long base_reg; - unsigned long trigger_map; - unsigned long wake_enable; -}; - -u32 omap_irq_flags; -static unsigned int irq_bank_count; -static struct omap_irq_bank *irq_banks; - -static inline unsigned int irq_bank_readl(int bank, int offset) -{ - return omap_readl(irq_banks[bank].base_reg + offset); -} - -static inline void irq_bank_writel(unsigned long value, int bank, int offset) -{ - omap_writel(value, irq_banks[bank].base_reg + offset); -} - -static void omap_ack_irq(struct irq_data *d) -{ - if (d->irq > 31) - omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET); - - omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET); -} - -static void omap_mask_irq(struct irq_data *d) -{ - int bank = IRQ_BANK(d->irq); - u32 l; - - l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); - l |= 1 << IRQ_BIT(d->irq); - omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); -} - -static void omap_unmask_irq(struct irq_data *d) -{ - int bank = IRQ_BANK(d->irq); - u32 l; - - l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); - l &= ~(1 << IRQ_BIT(d->irq)); - omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); -} - -static void omap_mask_ack_irq(struct irq_data *d) -{ - omap_mask_irq(d); - omap_ack_irq(d); -} - -static int omap_wake_irq(struct irq_data *d, unsigned int enable) -{ - int bank = IRQ_BANK(d->irq); - - if (enable) - irq_banks[bank].wake_enable |= IRQ_BIT(d->irq); - else - irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq); - - return 0; -} - - -/* - * Allows tuning the IRQ type and priority - * - * NOTE: There is currently no OMAP fiq handler for Linux. Read the - * mailing list threads on FIQ handlers if you are planning to - * add a FIQ handler for OMAP. - */ -static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) -{ - signed int bank; - unsigned long val, offset; - - bank = IRQ_BANK(irq); - /* FIQ is only available on bank 0 interrupts */ - fiq = bank ? 0 : (fiq & 0x1); - val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1); - offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4; - irq_bank_writel(val, bank, offset); -} - -#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) -static struct omap_irq_bank omap7xx_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP15XX -static struct omap_irq_bank omap1510_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed }, -}; -static struct omap_irq_bank omap310_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 }, -}; -#endif - -#if defined(CONFIG_ARCH_OMAP16XX) - -static struct omap_irq_bank omap1610_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff }, - { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff }, -}; -#endif - -static struct irq_chip omap_irq_chip = { - .name = "MPU", - .irq_ack = omap_mask_ack_irq, - .irq_mask = omap_mask_irq, - .irq_unmask = omap_unmask_irq, - .irq_set_wake = omap_wake_irq, -}; - -void __init omap1_init_irq(void) -{ - int i, j; - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (cpu_is_omap7xx()) { - omap_irq_flags = INT_7XX_IH2_IRQ; - irq_banks = omap7xx_irq_banks; - irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); - } -#endif -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - omap_irq_flags = INT_1510_IH2_IRQ; - irq_banks = omap1510_irq_banks; - irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); - } - if (cpu_is_omap310()) { - omap_irq_flags = INT_1510_IH2_IRQ; - irq_banks = omap310_irq_banks; - irq_bank_count = ARRAY_SIZE(omap310_irq_banks); - } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (cpu_is_omap16xx()) { - omap_irq_flags = INT_1510_IH2_IRQ; - irq_banks = omap1610_irq_banks; - irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); - } -#endif - printk("Total of %i interrupts in %i interrupt banks\n", - irq_bank_count * 32, irq_bank_count); - - /* Mask and clear all interrupts */ - for (i = 0; i < irq_bank_count; i++) { - irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET); - irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET); - } - - /* Clear any pending interrupts */ - irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET); - irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); - - /* Enable interrupts in global mask */ - if (cpu_is_omap7xx()) - irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); - - /* Install the interrupt handlers for each bank */ - for (i = 0; i < irq_bank_count; i++) { - for (j = i * 32; j < (i + 1) * 32; j++) { - int irq_trigger; - - irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); - omap_irq_set_cfg(j, 0, 0, irq_trigger); - - irq_set_chip_and_handler(j, &omap_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - } - - /* Unmask level 2 handler */ - - if (cpu_is_omap7xx()) - omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ)); - else if (cpu_is_omap15xx()) - omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ)); - else if (cpu_is_omap16xx()) - omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ)); -} |