Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 2199 insertions, 0 deletions

diff --git a/sound/isa/wavefront/wavefront_synth.c b/sound/isa/wavefront/wavefront_synth.c
new file mode 100644
index 00000000..405f8b6a
--- /dev/null
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -0,0 +1,2199 @@
+/* Copyright (C) by Paul Barton-Davis 1998-1999
+ *
+ * Some portions of this file are taken from work that is
+ * copyright (C) by Hannu Savolainen 1993-1996
+ *
+ * This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
+ * Version 2 (June 1991). See the "COPYING" file distributed with this software
+ * for more info.  
+ */
+
+/*  
+ * An ALSA lowlevel driver for Turtle Beach ICS2115 wavetable synth
+ *                                             (Maui, Tropez, Tropez Plus)
+ *
+ * This driver supports the onboard wavetable synthesizer (an ICS2115),
+ * including patch, sample and program loading and unloading, conversion
+ * of GUS patches during loading, and full user-level access to all
+ * WaveFront commands. It tries to provide semi-intelligent patch and
+ * sample management as well.
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/firmware.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/snd_wavefront.h>
+#include <sound/initval.h>
+
+static int wf_raw = 0; /* we normally check for "raw state" to firmware
+			  loading. if non-zero, then during driver loading, the
+			  state of the board is ignored, and we reset the
+			  board and load the firmware anyway.
+		       */
+		   
+static int fx_raw = 1; /* if this is zero, we'll leave the FX processor in
+			  whatever state it is when the driver is loaded.
+			  The default is to download the microprogram and
+			  associated coefficients to set it up for "default"
+			  operation, whatever that means.
+		       */
+
+static int debug_default = 0;  /* you can set this to control debugging
+				  during driver loading. it takes any combination
+				  of the WF_DEBUG_* flags defined in
+				  wavefront.h
+			       */
+
+/* XXX this needs to be made firmware and hardware version dependent */
+
+#define DEFAULT_OSPATH	"wavefront.os"
+static char *ospath = DEFAULT_OSPATH; /* the firmware file name */
+
+static int wait_usecs = 150; /* This magic number seems to give pretty optimal
+				throughput based on my limited experimentation.
+				If you want to play around with it and find a better
+				value, be my guest. Remember, the idea is to
+				get a number that causes us to just busy wait
+				for as many WaveFront commands as possible, without
+				coming up with a number so large that we hog the
+				whole CPU.
+
+				Specifically, with this number, out of about 134,000
+				status waits, only about 250 result in a sleep.
+			    */
+
+static int sleep_interval = 100;   /* HZ/sleep_interval seconds per sleep */
+static int sleep_tries = 50;       /* number of times we'll try to sleep */
+
+static int reset_time = 2;        /* hundreths of a second we wait after a HW
+				     reset for the expected interrupt.
+				  */
+
+static int ramcheck_time = 20;    /* time in seconds to wait while ROM code
+				     checks on-board RAM.
+				  */
+
+static int osrun_time = 10;       /* time in seconds we wait for the OS to
+				     start running.
+				  */
+module_param(wf_raw, int, 0444);
+MODULE_PARM_DESC(wf_raw, "if non-zero, assume that we need to boot the OS");
+module_param(fx_raw, int, 0444);
+MODULE_PARM_DESC(fx_raw, "if non-zero, assume that the FX process needs help");
+module_param(debug_default, int, 0444);
+MODULE_PARM_DESC(debug_default, "debug parameters for card initialization");
+module_param(wait_usecs, int, 0444);
+MODULE_PARM_DESC(wait_usecs, "how long to wait without sleeping, usecs");
+module_param(sleep_interval, int, 0444);
+MODULE_PARM_DESC(sleep_interval, "how long to sleep when waiting for reply");
+module_param(sleep_tries, int, 0444);
+MODULE_PARM_DESC(sleep_tries, "how many times to try sleeping during a wait");
+module_param(ospath, charp, 0444);
+MODULE_PARM_DESC(ospath, "pathname to processed ICS2115 OS firmware");
+module_param(reset_time, int, 0444);
+MODULE_PARM_DESC(reset_time, "how long to wait for a reset to take effect");
+module_param(ramcheck_time, int, 0444);
+MODULE_PARM_DESC(ramcheck_time, "how many seconds to wait for the RAM test");
+module_param(osrun_time, int, 0444);
+MODULE_PARM_DESC(osrun_time, "how many seconds to wait for the ICS2115 OS");
+
+/* if WF_DEBUG not defined, no run-time debugging messages will
+   be available via the debug flag setting. Given the current
+   beta state of the driver, this will remain set until a future 
+   version.
+*/
+
+#define WF_DEBUG 1
+
+#ifdef WF_DEBUG
+
+#define DPRINT(cond, ...) \
+       if ((dev->debug & (cond)) == (cond)) { \
+	     snd_printk (__VA_ARGS__); \
+       }
+#else
+#define DPRINT(cond, args...)
+#endif /* WF_DEBUG */
+
+#define LOGNAME "WaveFront: "
+
+/* bitmasks for WaveFront status port value */
+
+#define STAT_RINTR_ENABLED	0x01
+#define STAT_CAN_READ		0x02
+#define STAT_INTR_READ		0x04
+#define STAT_WINTR_ENABLED	0x10
+#define STAT_CAN_WRITE		0x20
+#define STAT_INTR_WRITE		0x40
+
+static int wavefront_delete_sample (snd_wavefront_t *, int sampnum);
+static int wavefront_find_free_sample (snd_wavefront_t *);
+
+struct wavefront_command {
+	int cmd;
+	char *action;
+	unsigned int read_cnt;
+	unsigned int write_cnt;
+	int need_ack;
+};
+
+static struct {
+	int errno;
+	const char *errstr;
+} wavefront_errors[] = {
+	{ 0x01, "Bad sample number" },
+	{ 0x02, "Out of sample memory" },
+	{ 0x03, "Bad patch number" },
+	{ 0x04, "Error in number of voices" },
+	{ 0x06, "Sample load already in progress" },
+	{ 0x0B, "No sample load request pending" },
+	{ 0x0E, "Bad MIDI channel number" },
+	{ 0x10, "Download Record Error" },
+	{ 0x80, "Success" },
+	{ 0x0 }
+};
+
+#define NEEDS_ACK 1
+
+static struct wavefront_command wavefront_commands[] = {
+	{ WFC_SET_SYNTHVOL, "set synthesizer volume", 0, 1, NEEDS_ACK },
+	{ WFC_GET_SYNTHVOL, "get synthesizer volume", 1, 0, 0},
+	{ WFC_SET_NVOICES, "set number of voices", 0, 1, NEEDS_ACK },
+	{ WFC_GET_NVOICES, "get number of voices", 1, 0, 0 },
+	{ WFC_SET_TUNING, "set synthesizer tuning", 0, 2, NEEDS_ACK },
+	{ WFC_GET_TUNING, "get synthesizer tuning", 2, 0, 0 },
+	{ WFC_DISABLE_CHANNEL, "disable synth channel", 0, 1, NEEDS_ACK },
+	{ WFC_ENABLE_CHANNEL, "enable synth channel", 0, 1, NEEDS_ACK },
+	{ WFC_GET_CHANNEL_STATUS, "get synth channel status", 3, 0, 0 },
+	{ WFC_MISYNTH_OFF, "disable midi-in to synth", 0, 0, NEEDS_ACK },
+	{ WFC_MISYNTH_ON, "enable midi-in to synth", 0, 0, NEEDS_ACK },
+	{ WFC_VMIDI_ON, "enable virtual midi mode", 0, 0, NEEDS_ACK },
+	{ WFC_VMIDI_OFF, "disable virtual midi mode", 0, 0, NEEDS_ACK },
+	{ WFC_MIDI_STATUS, "report midi status", 1, 0, 0 },
+	{ WFC_FIRMWARE_VERSION, "report firmware version", 2, 0, 0 },
+	{ WFC_HARDWARE_VERSION, "report hardware version", 2, 0, 0 },
+	{ WFC_GET_NSAMPLES, "report number of samples", 2, 0, 0 },
+	{ WFC_INSTOUT_LEVELS, "report instantaneous output levels", 7, 0, 0 },
+	{ WFC_PEAKOUT_LEVELS, "report peak output levels", 7, 0, 0 },
+	{ WFC_DOWNLOAD_SAMPLE, "download sample",
+	  0, WF_SAMPLE_BYTES, NEEDS_ACK },
+	{ WFC_DOWNLOAD_BLOCK, "download block", 0, 0, NEEDS_ACK},
+	{ WFC_DOWNLOAD_SAMPLE_HEADER, "download sample header",
+	  0, WF_SAMPLE_HDR_BYTES, NEEDS_ACK },
+	{ WFC_UPLOAD_SAMPLE_HEADER, "upload sample header", 13, 2, 0 },
+
+	/* This command requires a variable number of bytes to be written.
+	   There is a hack in snd_wavefront_cmd() to support this. The actual
+	   count is passed in as the read buffer ptr, cast appropriately.
+	   Ugh.
+	*/
+
+	{ WFC_DOWNLOAD_MULTISAMPLE, "download multisample", 0, 0, NEEDS_ACK },
+
+	/* This one is a hack as well. We just read the first byte of the
+	   response, don't fetch an ACK, and leave the rest to the 
+	   calling function. Ugly, ugly, ugly.
+	*/
+
+	{ WFC_UPLOAD_MULTISAMPLE, "upload multisample", 2, 1, 0 },
+	{ WFC_DOWNLOAD_SAMPLE_ALIAS, "download sample alias",
+	  0, WF_ALIAS_BYTES, NEEDS_ACK },
+	{ WFC_UPLOAD_SAMPLE_ALIAS, "upload sample alias", WF_ALIAS_BYTES, 2, 0},
+	{ WFC_DELETE_SAMPLE, "delete sample", 0, 2, NEEDS_ACK },
+	{ WFC_IDENTIFY_SAMPLE_TYPE, "identify sample type", 5, 2, 0 },
+	{ WFC_UPLOAD_SAMPLE_PARAMS, "upload sample parameters" },
+	{ WFC_REPORT_FREE_MEMORY, "report free memory", 4, 0, 0 },
+	{ WFC_DOWNLOAD_PATCH, "download patch", 0, 134, NEEDS_ACK },
+	{ WFC_UPLOAD_PATCH, "upload patch", 132, 2, 0 },
+	{ WFC_DOWNLOAD_PROGRAM, "download program", 0, 33, NEEDS_ACK },
+	{ WFC_UPLOAD_PROGRAM, "upload program", 32, 1, 0 },
+	{ WFC_DOWNLOAD_EDRUM_PROGRAM, "download enhanced drum program", 0, 9,
+	  NEEDS_ACK},
+	{ WFC_UPLOAD_EDRUM_PROGRAM, "upload enhanced drum program", 8, 1, 0},
+	{ WFC_SET_EDRUM_CHANNEL, "set enhanced drum program channel",
+	  0, 1, NEEDS_ACK },
+	{ WFC_DISABLE_DRUM_PROGRAM, "disable drum program", 0, 1, NEEDS_ACK },
+	{ WFC_REPORT_CHANNEL_PROGRAMS, "report channel program numbers",
+	  32, 0, 0 },
+	{ WFC_NOOP, "the no-op command", 0, 0, NEEDS_ACK },
+	{ 0x00 }
+};
+
+static const char *
+wavefront_errorstr (int errnum)
+
+{
+	int i;
+
+	for (i = 0; wavefront_errors[i].errstr; i++) {
+		if (wavefront_errors[i].errno == errnum) {
+			return wavefront_errors[i].errstr;
+		}
+	}
+
+	return "Unknown WaveFront error";
+}
+
+static struct wavefront_command *
+wavefront_get_command (int cmd) 
+
+{
+	int i;
+
+	for (i = 0; wavefront_commands[i].cmd != 0; i++) {
+		if (cmd == wavefront_commands[i].cmd) {
+			return &wavefront_commands[i];
+		}
+	}
+
+	return NULL;
+}
+
+static inline int
+wavefront_status (snd_wavefront_t *dev) 
+
+{
+	return inb (dev->status_port);
+}
+
+static int
+wavefront_sleep (int limit)
+
+{
+	schedule_timeout_interruptible(limit);
+
+	return signal_pending(current);
+}
+
+static int
+wavefront_wait (snd_wavefront_t *dev, int mask)
+
+{
+	int             i;
+
+	/* Spin for a short period of time, because >99% of all
+	   requests to the WaveFront can be serviced inline like this.
+	*/
+
+	for (i = 0; i < wait_usecs; i += 5) {
+		if (wavefront_status (dev) & mask) {
+			return 1;
+		}
+		udelay(5);
+	}
+
+	for (i = 0; i < sleep_tries; i++) {
+
+		if (wavefront_status (dev) & mask) {
+			return 1;
+		}
+
+		if (wavefront_sleep (HZ/sleep_interval)) {
+			return (0);
+		}
+	}
+
+	return (0);
+}
+
+static int
+wavefront_read (snd_wavefront_t *dev)
+
+{
+	if (wavefront_wait (dev, STAT_CAN_READ))
+		return inb (dev->data_port);
+
+	DPRINT (WF_DEBUG_DATA, "read timeout.\n");
+
+	return -1;
+}
+
+static int
+wavefront_write (snd_wavefront_t *dev, unsigned char data)
+
+{
+	if (wavefront_wait (dev, STAT_CAN_WRITE)) {
+		outb (data, dev->data_port);
+		return 0;
+	}
+
+	DPRINT (WF_DEBUG_DATA, "write timeout.\n");
+
+	return -1;
+}
+
+int
+snd_wavefront_cmd (snd_wavefront_t *dev, 
+		   int cmd, unsigned char *rbuf, unsigned char *wbuf)
+
+{
+	int ack;
+	unsigned int i;
+	int c;
+	struct wavefront_command *wfcmd;
+
+	if ((wfcmd = wavefront_get_command (cmd)) == NULL) {
+		snd_printk ("command 0x%x not supported.\n",
+			cmd);
+		return 1;
+	}
+
+	/* Hack to handle the one variable-size write command. See
+	   wavefront_send_multisample() for the other half of this
+	   gross and ugly strategy.
+	*/
+
+	if (cmd == WFC_DOWNLOAD_MULTISAMPLE) {
+		wfcmd->write_cnt = (unsigned long) rbuf;
+		rbuf = NULL;
+	}
+
+	DPRINT (WF_DEBUG_CMD, "0x%x [%s] (%d,%d,%d)\n",
+			       cmd, wfcmd->action, wfcmd->read_cnt,
+			       wfcmd->write_cnt, wfcmd->need_ack);
+    
+	if (wavefront_write (dev, cmd)) { 
+		DPRINT ((WF_DEBUG_IO|WF_DEBUG_CMD), "cannot request "
+						     "0x%x [%s].\n",
+						     cmd, wfcmd->action);
+		return 1;
+	} 
+
+	if (wfcmd->write_cnt > 0) {
+		DPRINT (WF_DEBUG_DATA, "writing %d bytes "
+					"for 0x%x\n",
+					wfcmd->write_cnt, cmd);
+
+		for (i = 0; i < wfcmd->write_cnt; i++) {
+			if (wavefront_write (dev, wbuf[i])) {
+				DPRINT (WF_DEBUG_IO, "bad write for byte "
+						      "%d of 0x%x [%s].\n",
+						      i, cmd, wfcmd->action);
+				return 1;
+			}
+
+			DPRINT (WF_DEBUG_DATA, "write[%d] = 0x%x\n",
+						i, wbuf[i]);
+		}
+	}
+
+	if (wfcmd->read_cnt > 0) {
+		DPRINT (WF_DEBUG_DATA, "reading %d ints "
+					"for 0x%x\n",
+					wfcmd->read_cnt, cmd);
+
+		for (i = 0; i < wfcmd->read_cnt; i++) {
+
+			if ((c = wavefront_read (dev)) == -1) {
+				DPRINT (WF_DEBUG_IO, "bad read for byte "
+						      "%d of 0x%x [%s].\n",
+						      i, cmd, wfcmd->action);
+				return 1;
+			}
+
+			/* Now handle errors. Lots of special cases here */
+	    
+			if (c == 0xff) { 
+				if ((c = wavefront_read (dev)) == -1) {
+					DPRINT (WF_DEBUG_IO, "bad read for "
+							      "error byte at "
+							      "read byte %d "
+							      "of 0x%x [%s].\n",
+							      i, cmd,
+							      wfcmd->action);
+					return 1;
+				}
+
+				/* Can you believe this madness ? */
+
+				if (c == 1 &&
+				    wfcmd->cmd == WFC_IDENTIFY_SAMPLE_TYPE) {
+					rbuf[0] = WF_ST_EMPTY;
+					return (0);
+
+				} else if (c == 3 &&
+					   wfcmd->cmd == WFC_UPLOAD_PATCH) {
+
+					return 3;
+
+				} else if (c == 1 &&
+					   wfcmd->cmd == WFC_UPLOAD_PROGRAM) {
+
+					return 1;
+
+				} else {
+
+					DPRINT (WF_DEBUG_IO, "error %d (%s) "
+							      "during "
+							      "read for byte "
+							      "%d of 0x%x "
+							      "[%s].\n",
+							      c,
+							      wavefront_errorstr (c),
+							      i, cmd,
+							      wfcmd->action);
+					return 1;
+
+				}
+		
+		} else {
+				rbuf[i] = c;
+			}
+			
+			DPRINT (WF_DEBUG_DATA, "read[%d] = 0x%x\n",i, rbuf[i]);
+		}
+	}
+	
+	if ((wfcmd->read_cnt == 0 && wfcmd->write_cnt == 0) || wfcmd->need_ack) {
+
+		DPRINT (WF_DEBUG_CMD, "reading ACK for 0x%x\n", cmd);
+
+		/* Some commands need an ACK, but return zero instead
+		   of the standard value.
+		*/
+	    
+		if ((ack = wavefront_read (dev)) == 0) {
+			ack = WF_ACK;
+		}
+	
+		if (ack != WF_ACK) {
+			if (ack == -1) {
+				DPRINT (WF_DEBUG_IO, "cannot read ack for "
+						      "0x%x [%s].\n",
+						      cmd, wfcmd->action);
+				return 1;
+		
+			} else {
+				int err = -1; /* something unknown */
+
+				if (ack == 0xff) { /* explicit error */
+		    
+					if ((err = wavefront_read (dev)) == -1) {
+						DPRINT (WF_DEBUG_DATA,
+							"cannot read err "
+							"for 0x%x [%s].\n",
+							cmd, wfcmd->action);
+					}
+				}
+				
+				DPRINT (WF_DEBUG_IO, "0x%x [%s] "
+					"failed (0x%x, 0x%x, %s)\n",
+					cmd, wfcmd->action, ack, err,
+					wavefront_errorstr (err));
+				
+				return -err;
+			}
+		}
+		
+		DPRINT (WF_DEBUG_DATA, "ack received "
+					"for 0x%x [%s]\n",
+					cmd, wfcmd->action);
+	} else {
+
+		DPRINT (WF_DEBUG_CMD, "0x%x [%s] does not need "
+				       "ACK (%d,%d,%d)\n",
+				       cmd, wfcmd->action, wfcmd->read_cnt,
+				       wfcmd->write_cnt, wfcmd->need_ack);
+	}
+
+	return 0;
+	
+}
+
+/***********************************************************************
+WaveFront data munging   
+
+Things here are weird. All data written to the board cannot 
+have its most significant bit set. Any data item with values 
+potentially > 0x7F (127) must be split across multiple bytes.
+
+Sometimes, we need to munge numeric values that are represented on
+the x86 side as 8-32 bit values. Sometimes, we need to munge data
+that is represented on the x86 side as an array of bytes. The most
+efficient approach to handling both cases seems to be to use 2
+different functions for munging and 2 for de-munging. This avoids
+weird casting and worrying about bit-level offsets.
+
+**********************************************************************/
+
+static unsigned char *
+munge_int32 (unsigned int src,
+	     unsigned char *dst,
+	     unsigned int dst_size)
+{
+	unsigned int i;
+
+	for (i = 0; i < dst_size; i++) {
+		*dst = src & 0x7F;  /* Mask high bit of LSB */
+		src = src >> 7;     /* Rotate Right 7 bits  */
+	                            /* Note: we leave the upper bits in place */ 
+
+		dst++;
+ 	};
+	return dst;
+};
+
+static int 
+demunge_int32 (unsigned char* src, int src_size)
+
+{
+	int i;
+ 	int outval = 0;
+	
+ 	for (i = src_size - 1; i >= 0; i--) {
+		outval=(outval<<7)+src[i];
+	}
+
+	return outval;
+};
+
+static 
+unsigned char *
+munge_buf (unsigned char *src, unsigned char *dst, unsigned int dst_size)
+
+{
+	unsigned int i;
+	unsigned int last = dst_size / 2;
+
+	for (i = 0; i < last; i++) {
+		*dst++ = src[i] & 0x7f;
+		*dst++ = src[i] >> 7;
+	}
+	return dst;
+}
+
+static 
+unsigned char *
+demunge_buf (unsigned char *src, unsigned char *dst, unsigned int src_bytes)
+
+{
+	int i;
+	unsigned char *end = src + src_bytes;
+    
+	end = src + src_bytes;
+
+	/* NOTE: src and dst *CAN* point to the same address */
+
+	for (i = 0; src != end; i++) {
+		dst[i] = *src++;
+		dst[i] |= (*src++)<<7;
+	}
+
+	return dst;
+}
+
+/***********************************************************************
+WaveFront: sample, patch and program management.
+***********************************************************************/
+
+static int
+wavefront_delete_sample (snd_wavefront_t *dev, int sample_num)
+
+{
+	unsigned char wbuf[2];
+	int x;
+
+	wbuf[0] = sample_num & 0x7f;
+	wbuf[1] = sample_num >> 7;
+
+	if ((x = snd_wavefront_cmd (dev, WFC_DELETE_SAMPLE, NULL, wbuf)) == 0) {
+		dev->sample_status[sample_num] = WF_ST_EMPTY;
+	}
+
+	return x;
+}
+
+static int
+wavefront_get_sample_status (snd_wavefront_t *dev, int assume_rom)
+
+{
+	int i;
+	unsigned char rbuf[32], wbuf[32];
+	unsigned int    sc_real, sc_alias, sc_multi;
+
+	/* check sample status */
+    
+	if (snd_wavefront_cmd (dev, WFC_GET_NSAMPLES, rbuf, wbuf)) {
+		snd_printk ("cannot request sample count.\n");
+		return -1;
+	} 
+    
+	sc_real = sc_alias = sc_multi = dev->samples_used = 0;
+    
+	for (i = 0; i < WF_MAX_SAMPLE; i++) {
+	
+		wbuf[0] = i & 0x7f;
+		wbuf[1] = i >> 7;
+
+		if (snd_wavefront_cmd (dev, WFC_IDENTIFY_SAMPLE_TYPE, rbuf, wbuf)) {
+			snd_printk(KERN_WARNING "cannot identify sample "
+				   "type of slot %d\n", i);
+			dev->sample_status[i] = WF_ST_EMPTY;
+			continue;
+		}
+
+		dev->sample_status[i] = (WF_SLOT_FILLED|rbuf[0]);
+
+		if (assume_rom) {
+			dev->sample_status[i] |= WF_SLOT_ROM;
+		}
+
+		switch (rbuf[0] & WF_ST_MASK) {
+		case WF_ST_SAMPLE:
+			sc_real++;
+			break;
+		case WF_ST_MULTISAMPLE:
+			sc_multi++;
+			break;
+		case WF_ST_ALIAS:
+			sc_alias++;
+			break;
+		case WF_ST_EMPTY:
+			break;
+
+		default:
+			snd_printk ("unknown sample type for "
+				    "slot %d (0x%x)\n", 
+				    i, rbuf[0]);
+		}
+
+		if (rbuf[0] != WF_ST_EMPTY) {
+			dev->samples_used++;
+		} 
+	}
+
+	snd_printk ("%d samples used (%d real, %d aliases, %d multi), "
+		    "%d empty\n", dev->samples_used, sc_real, sc_alias, sc_multi,
+		    WF_MAX_SAMPLE - dev->samples_used);
+
+
+	return (0);
+
+}
+
+static int
+wavefront_get_patch_status (snd_wavefront_t *dev)
+
+{
+	unsigned char patchbuf[WF_PATCH_BYTES];
+	unsigned char patchnum[2];
+	wavefront_patch *p;
+	int i, x, cnt, cnt2;
+
+	for (i = 0; i < WF_MAX_PATCH; i++) {
+		patchnum[0] = i & 0x7f;
+		patchnum[1] = i >> 7;
+
+		if ((x = snd_wavefront_cmd (dev, WFC_UPLOAD_PATCH, patchbuf,
+					patchnum)) == 0) {
+
+			dev->patch_status[i] |= WF_SLOT_FILLED;
+			p = (wavefront_patch *) patchbuf;
+			dev->sample_status
+				[p->sample_number|(p->sample_msb<<7)] |=
+				WF_SLOT_USED;
+	    
+		} else if (x == 3) { /* Bad patch number */
+			dev->patch_status[i] = 0;
+		} else {
+			snd_printk ("upload patch "
+				    "error 0x%x\n", x);
+			dev->patch_status[i] = 0;
+			return 1;
+		}
+	}
+
+	/* program status has already filled in slot_used bits */
+
+	for (i = 0, cnt = 0, cnt2 = 0; i < WF_MAX_PATCH; i++) {
+		if (dev->patch_status[i] & WF_SLOT_FILLED) {
+			cnt++;
+		}
+		if (dev->patch_status[i] & WF_SLOT_USED) {
+			cnt2++;
+		}
+	
+	}
+	snd_printk ("%d patch slots filled, %d in use\n", cnt, cnt2);
+
+	return (0);
+}
+
+static int
+wavefront_get_program_status (snd_wavefront_t *dev)
+
+{
+	unsigned char progbuf[WF_PROGRAM_BYTES];
+	wavefront_program prog;
+	unsigned char prognum;
+	int i, x, l, cnt;
+
+	for (i = 0; i < WF_MAX_PROGRAM; i++) {
+		prognum = i;
+
+		if ((x = snd_wavefront_cmd (dev, WFC_UPLOAD_PROGRAM, progbuf,
+					&prognum)) == 0) {
+
+			dev->prog_status[i] |= WF_SLOT_USED;
+
+			demunge_buf (progbuf, (unsigned char *) &prog,
+				     WF_PROGRAM_BYTES);
+
+			for (l = 0; l < WF_NUM_LAYERS; l++) {
+				if (prog.layer[l].mute) {
+					dev->patch_status
+						[prog.layer[l].patch_number] |=
+						WF_SLOT_USED;
+				}
+			}
+		} else if (x == 1) { /* Bad program number */
+			dev->prog_status[i] = 0;
+		} else {
+			snd_printk ("upload program "
+				    "error 0x%x\n", x);
+			dev->prog_status[i] = 0;
+		}
+	}
+
+	for (i = 0, cnt = 0; i < WF_MAX_PROGRAM; i++) {
+		if (dev->prog_status[i]) {
+			cnt++;
+		}
+	}
+
+	snd_printk ("%d programs slots in use\n", cnt);
+
+	return (0);
+}
+
+static int
+wavefront_send_patch (snd_wavefront_t *dev, wavefront_patch_info *header)
+
+{
+	unsigned char buf[WF_PATCH_BYTES+2];
+	unsigned char *bptr;
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "downloading patch %d\n",
+				      header->number);
+
+	dev->patch_status[header->number] |= WF_SLOT_FILLED;
+
+	bptr = buf;
+	bptr = munge_int32 (header->number, buf, 2);
+	munge_buf ((unsigned char *)&header->hdr.p, bptr, WF_PATCH_BYTES);
+    
+	if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_PATCH, NULL, buf)) {
+		snd_printk ("download patch failed\n");
+		return -(EIO);
+	}
+
+	return (0);
+}
+
+static int
+wavefront_send_program (snd_wavefront_t *dev, wavefront_patch_info *header)
+
+{
+	unsigned char buf[WF_PROGRAM_BYTES+1];
+	int i;
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "downloading program %d\n",
+		header->number);
+
+	dev->prog_status[header->number] = WF_SLOT_USED;
+
+	/* XXX need to zero existing SLOT_USED bit for program_status[i]
+	   where `i' is the program that's being (potentially) overwritten.
+	*/
+    
+	for (i = 0; i < WF_NUM_LAYERS; i++) {
+		if (header->hdr.pr.layer[i].mute) {
+			dev->patch_status[header->hdr.pr.layer[i].patch_number] |=
+				WF_SLOT_USED;
+
+			/* XXX need to mark SLOT_USED for sample used by
+			   patch_number, but this means we have to load it. Ick.
+			*/
+		}
+	}
+
+	buf[0] = header->number;
+	munge_buf ((unsigned char *)&header->hdr.pr, &buf[1], WF_PROGRAM_BYTES);
+    
+	if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_PROGRAM, NULL, buf)) {
+		snd_printk ("download patch failed\n");	
+		return -(EIO);
+	}
+
+	return (0);
+}
+
+static int
+wavefront_freemem (snd_wavefront_t *dev)
+
+{
+	char rbuf[8];
+
+	if (snd_wavefront_cmd (dev, WFC_REPORT_FREE_MEMORY, rbuf, NULL)) {
+		snd_printk ("can't get memory stats.\n");
+		return -1;
+	} else {
+		return demunge_int32 (rbuf, 4);
+	}
+}
+
+static int
+wavefront_send_sample (snd_wavefront_t *dev, 
+		       wavefront_patch_info *header,
+		       u16 __user *dataptr,
+		       int data_is_unsigned)
+
+{
+	/* samples are downloaded via a 16-bit wide i/o port
+	   (you could think of it as 2 adjacent 8-bit wide ports
+	   but its less efficient that way). therefore, all
+	   the blocksizes and so forth listed in the documentation,
+	   and used conventionally to refer to sample sizes,
+	   which are given in 8-bit units (bytes), need to be
+	   divided by 2.
+        */
+
+	u16 sample_short = 0;
+	u32 length;
+	u16 __user *data_end = NULL;
+	unsigned int i;
+	const unsigned int max_blksize = 4096/2;
+	unsigned int written;
+	unsigned int blocksize;
+	int dma_ack;
+	int blocknum;
+	unsigned char sample_hdr[WF_SAMPLE_HDR_BYTES];
+	unsigned char *shptr;
+	int skip = 0;
+	int initial_skip = 0;
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "sample %sdownload for slot %d, "
+				      "type %d, %d bytes from 0x%lx\n",
+				      header->size ? "" : "header ", 
+				      header->number, header->subkey,
+				      header->size,
+				      (unsigned long) header->dataptr);
+
+	if (header->number == WAVEFRONT_FIND_FREE_SAMPLE_SLOT) {
+		int x;
+
+		if ((x = wavefront_find_free_sample (dev)) < 0) {
+			return -ENOMEM;
+		}
+		snd_printk ("unspecified sample => %d\n", x);
+		header->number = x;
+	}
+
+	if (header->size) {
+
+		/* XXX it's a debatable point whether or not RDONLY semantics
+		   on the ROM samples should cover just the sample data or
+		   the sample header. For now, it only covers the sample data,
+		   so anyone is free at all times to rewrite sample headers.
+
+		   My reason for this is that we have the sample headers
+		   available in the WFB file for General MIDI, and so these
+		   can always be reset if needed. The sample data, however,
+		   cannot be recovered without a complete reset and firmware
+		   reload of the ICS2115, which is a very expensive operation.
+
+		   So, doing things this way allows us to honor the notion of
+		   "RESETSAMPLES" reasonably cheaply. Note however, that this
+		   is done purely at user level: there is no WFB parser in
+		   this driver, and so a complete reset (back to General MIDI,
+		   or theoretically some other configuration) is the
+		   responsibility of the user level library. 
+
+		   To try to do this in the kernel would be a little
+		   crazy: we'd need 158K of kernel space just to hold
+		   a copy of the patch/program/sample header data.
+		*/
+
+		if (dev->rom_samples_rdonly) {
+			if (dev->sample_status[header->number] & WF_SLOT_ROM) {
+				snd_printk ("sample slot %d "
+					    "write protected\n",
+					    header->number);
+				return -EACCES;
+			}
+		}
+
+		wavefront_delete_sample (dev, header->number);
+	}
+
+	if (header->size) {
+		dev->freemem = wavefront_freemem (dev);
+
+		if (dev->freemem < (int)header->size) {
+			snd_printk ("insufficient memory to "
+				    "load %d byte sample.\n",
+				    header->size);
+			return -ENOMEM;
+		}
+	
+	}
+
+	skip = WF_GET_CHANNEL(&header->hdr.s);
+
+	if (skip > 0 && header->hdr.s.SampleResolution != LINEAR_16BIT) {
+		snd_printk ("channel selection only "
+			    "possible on 16-bit samples");
+		return -(EINVAL);
+	}
+
+	switch (skip) {
+	case 0:
+		initial_skip = 0;
+		skip = 1;
+		break;
+	case 1:
+		initial_skip = 0;
+		skip = 2;
+		break;
+	case 2:
+		initial_skip = 1;
+		skip = 2;
+		break;
+	case 3:
+		initial_skip = 2;
+		skip = 3;
+		break;
+	case 4:
+		initial_skip = 3;
+		skip = 4;
+		break;
+	case 5:
+		initial_skip = 4;
+		skip = 5;
+		break;
+	case 6:
+		initial_skip = 5;
+		skip = 6;
+		break;
+	}
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "channel selection: %d => "
+				      "initial skip = %d, skip = %d\n",
+				      WF_GET_CHANNEL (&header->hdr.s),
+				      initial_skip, skip);
+    
+	/* Be safe, and zero the "Unused" bits ... */
+
+	WF_SET_CHANNEL(&header->hdr.s, 0);
+
+	/* adjust size for 16 bit samples by dividing by two.  We always
+	   send 16 bits per write, even for 8 bit samples, so the length
+	   is always half the size of the sample data in bytes.
+	*/
+
+	length = header->size / 2;
+
+	/* the data we're sent has not been munged, and in fact, the
+	   header we have to send isn't just a munged copy either.
+	   so, build the sample header right here.
+	*/
+
+	shptr = &sample_hdr[0];
+
+	shptr = munge_int32 (header->number, shptr, 2);
+
+	if (header->size) {
+		shptr = munge_int32 (length, shptr, 4);
+	}
+
+	/* Yes, a 4 byte result doesn't contain all of the offset bits,
+	   but the offset only uses 24 bits.
+	*/
+
+	shptr = munge_int32 (*((u32 *) &header->hdr.s.sampleStartOffset),
+			     shptr, 4);
+	shptr = munge_int32 (*((u32 *) &header->hdr.s.loopStartOffset),
+			     shptr, 4);
+	shptr = munge_int32 (*((u32 *) &header->hdr.s.loopEndOffset),
+			     shptr, 4);
+	shptr = munge_int32 (*((u32 *) &header->hdr.s.sampleEndOffset),
+			     shptr, 4);
+	
+	/* This one is truly weird. What kind of weirdo decided that in
+	   a system dominated by 16 and 32 bit integers, they would use
+	   a just 12 bits ?
+	*/
+	
+	shptr = munge_int32 (header->hdr.s.FrequencyBias, shptr, 3);
+	
+	/* Why is this nybblified, when the MSB is *always* zero ? 
+	   Anyway, we can't take address of bitfield, so make a
+	   good-faith guess at where it starts.
+	*/
+	
+	shptr = munge_int32 (*(&header->hdr.s.FrequencyBias+1),
+			     shptr, 2);
+
+	if (snd_wavefront_cmd (dev, 
+			   header->size ?
+			   WFC_DOWNLOAD_SAMPLE : WFC_DOWNLOAD_SAMPLE_HEADER,
+			   NULL, sample_hdr)) {
+		snd_printk ("sample %sdownload refused.\n",
+			    header->size ? "" : "header ");
+		return -(EIO);
+	}
+
+	if (header->size == 0) {
+		goto sent; /* Sorry. Just had to have one somewhere */
+	}
+    
+	data_end = dataptr + length;
+
+	/* Do any initial skip over an unused channel's data */
+
+	dataptr += initial_skip;
+    
+	for (written = 0, blocknum = 0;
+	     written < length; written += max_blksize, blocknum++) {
+	
+		if ((length - written) > max_blksize) {
+			blocksize = max_blksize;
+		} else {
+			/* round to nearest 16-byte value */
+			blocksize = ALIGN(length - written, 8);
+		}
+
+		if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_BLOCK, NULL, NULL)) {
+			snd_printk ("download block "
+				    "request refused.\n");
+			return -(EIO);
+		}
+
+		for (i = 0; i < blocksize; i++) {
+
+			if (dataptr < data_end) {
+		
+				__get_user (sample_short, dataptr);
+				dataptr += skip;
+		
+				if (data_is_unsigned) { /* GUS ? */
+
+					if (WF_SAMPLE_IS_8BIT(&header->hdr.s)) {
+			
+						/* 8 bit sample
+						 resolution, sign
+						 extend both bytes.
+						*/
+			
+						((unsigned char*)
+						 &sample_short)[0] += 0x7f;
+						((unsigned char*)
+						 &sample_short)[1] += 0x7f;
+			
+					} else {
+			
+						/* 16 bit sample
+						 resolution, sign
+						 extend the MSB.
+						*/
+			
+						sample_short += 0x7fff;
+					}
+				}
+
+			} else {
+
+				/* In padding section of final block:
+
+				   Don't fetch unsupplied data from
+				   user space, just continue with
+				   whatever the final value was.
+				*/
+			}
+	    
+			if (i < blocksize - 1) {
+				outw (sample_short, dev->block_port);
+			} else {
+				outw (sample_short, dev->last_block_port);
+			}
+		}
+
+		/* Get "DMA page acknowledge", even though its really
+		   nothing to do with DMA at all.
+		*/
+	
+		if ((dma_ack = wavefront_read (dev)) != WF_DMA_ACK) {
+			if (dma_ack == -1) {
+				snd_printk ("upload sample "
+					    "DMA ack timeout\n");
+				return -(EIO);
+			} else {
+				snd_printk ("upload sample "
+					    "DMA ack error 0x%x\n",
+					    dma_ack);
+				return -(EIO);
+			}
+		}
+	}
+
+	dev->sample_status[header->number] = (WF_SLOT_FILLED|WF_ST_SAMPLE);
+
+	/* Note, label is here because sending the sample header shouldn't
+	   alter the sample_status info at all.
+	*/
+
+ sent:
+	return (0);
+}
+
+static int
+wavefront_send_alias (snd_wavefront_t *dev, wavefront_patch_info *header)
+
+{
+	unsigned char alias_hdr[WF_ALIAS_BYTES];
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "download alias, %d is "
+				      "alias for %d\n",
+				      header->number,
+				      header->hdr.a.OriginalSample);
+    
+	munge_int32 (header->number, &alias_hdr[0], 2);
+	munge_int32 (header->hdr.a.OriginalSample, &alias_hdr[2], 2);
+	munge_int32 (*((unsigned int *)&header->hdr.a.sampleStartOffset),
+		     &alias_hdr[4], 4);
+	munge_int32 (*((unsigned int *)&header->hdr.a.loopStartOffset),
+		     &alias_hdr[8], 4);
+	munge_int32 (*((unsigned int *)&header->hdr.a.loopEndOffset),
+		     &alias_hdr[12], 4);
+	munge_int32 (*((unsigned int *)&header->hdr.a.sampleEndOffset),
+		     &alias_hdr[16], 4);
+	munge_int32 (header->hdr.a.FrequencyBias, &alias_hdr[20], 3);
+	munge_int32 (*(&header->hdr.a.FrequencyBias+1), &alias_hdr[23], 2);
+
+	if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_SAMPLE_ALIAS, NULL, alias_hdr)) {
+		snd_printk ("download alias failed.\n");
+		return -(EIO);
+	}
+
+	dev->sample_status[header->number] = (WF_SLOT_FILLED|WF_ST_ALIAS);
+
+	return (0);
+}
+
+static int
+wavefront_send_multisample (snd_wavefront_t *dev, wavefront_patch_info *header)
+{
+	int i;
+	int num_samples;
+	unsigned char *msample_hdr;
+
+	msample_hdr = kmalloc(sizeof(WF_MSAMPLE_BYTES), GFP_KERNEL);
+	if (! msample_hdr)
+		return -ENOMEM;
+
+	munge_int32 (header->number, &msample_hdr[0], 2);
+
+	/* You'll recall at this point that the "number of samples" value
+	   in a wavefront_multisample struct is actually the log2 of the
+	   real number of samples.
+	*/
+
+	num_samples = (1<<(header->hdr.ms.NumberOfSamples&7));
+	msample_hdr[2] = (unsigned char) header->hdr.ms.NumberOfSamples;
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "multi %d with %d=%d samples\n",
+				      header->number,
+				      header->hdr.ms.NumberOfSamples,
+				      num_samples);
+
+	for (i = 0; i < num_samples; i++) {
+		DPRINT(WF_DEBUG_LOAD_PATCH|WF_DEBUG_DATA, "sample[%d] = %d\n",
+		       i, header->hdr.ms.SampleNumber[i]);
+		munge_int32 (header->hdr.ms.SampleNumber[i],
+		     &msample_hdr[3+(i*2)], 2);
+	}
+    
+	/* Need a hack here to pass in the number of bytes
+	   to be written to the synth. This is ugly, and perhaps
+	   one day, I'll fix it.
+	*/
+
+	if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_MULTISAMPLE, 
+			   (unsigned char *) (long) ((num_samples*2)+3),
+			   msample_hdr)) {
+		snd_printk ("download of multisample failed.\n");
+		kfree(msample_hdr);
+		return -(EIO);
+	}
+
+	dev->sample_status[header->number] = (WF_SLOT_FILLED|WF_ST_MULTISAMPLE);
+
+	kfree(msample_hdr);
+	return (0);
+}
+
+static int
+wavefront_fetch_multisample (snd_wavefront_t *dev, 
+			     wavefront_patch_info *header)
+{
+	int i;
+	unsigned char log_ns[1];
+	unsigned char number[2];
+	int num_samples;
+
+	munge_int32 (header->number, number, 2);
+    
+	if (snd_wavefront_cmd (dev, WFC_UPLOAD_MULTISAMPLE, log_ns, number)) {
+		snd_printk ("upload multisample failed.\n");
+		return -(EIO);
+	}
+    
+	DPRINT (WF_DEBUG_DATA, "msample %d has %d samples\n",
+				header->number, log_ns[0]);
+
+	header->hdr.ms.NumberOfSamples = log_ns[0];
+
+	/* get the number of samples ... */
+
+	num_samples = (1 << log_ns[0]);
+    
+	for (i = 0; i < num_samples; i++) {
+		char d[2];
+		int val;
+	
+		if ((val = wavefront_read (dev)) == -1) {
+			snd_printk ("upload multisample failed "
+				    "during sample loop.\n");
+			return -(EIO);
+		}
+		d[0] = val;
+
+		if ((val = wavefront_read (dev)) == -1) {
+			snd_printk ("upload multisample failed "
+				    "during sample loop.\n");
+			return -(EIO);
+		}
+		d[1] = val;
+	
+		header->hdr.ms.SampleNumber[i] =
+			demunge_int32 ((unsigned char *) d, 2);
+	
+		DPRINT (WF_DEBUG_DATA, "msample sample[%d] = %d\n",
+					i, header->hdr.ms.SampleNumber[i]);
+	}
+
+	return (0);
+}
+
+
+static int
+wavefront_send_drum (snd_wavefront_t *dev, wavefront_patch_info *header)
+
+{
+	unsigned char drumbuf[WF_DRUM_BYTES];
+	wavefront_drum *drum = &header->hdr.d;
+	int i;
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "downloading edrum for MIDI "
+		"note %d, patch = %d\n", 
+		header->number, drum->PatchNumber);
+
+	drumbuf[0] = header->number & 0x7f;
+
+	for (i = 0; i < 4; i++) {
+		munge_int32 (((unsigned char *)drum)[i], &drumbuf[1+(i*2)], 2);
+	}
+
+	if (snd_wavefront_cmd (dev, WFC_DOWNLOAD_EDRUM_PROGRAM, NULL, drumbuf)) {
+		snd_printk ("download drum failed.\n");
+		return -(EIO);
+	}
+
+	return (0);
+}
+
+static int 
+wavefront_find_free_sample (snd_wavefront_t *dev)
+
+{
+	int i;
+
+	for (i = 0; i < WF_MAX_SAMPLE; i++) {
+		if (!(dev->sample_status[i] & WF_SLOT_FILLED)) {
+			return i;
+		}
+	}
+	snd_printk ("no free sample slots!\n");
+	return -1;
+}
+
+#if 0
+static int 
+wavefront_find_free_patch (snd_wavefront_t *dev)
+
+{
+	int i;
+
+	for (i = 0; i < WF_MAX_PATCH; i++) {
+		if (!(dev->patch_status[i] & WF_SLOT_FILLED)) {
+			return i;
+		}
+	}
+	snd_printk ("no free patch slots!\n");
+	return -1;
+}
+#endif
+
+static int
+wavefront_load_patch (snd_wavefront_t *dev, const char __user *addr)
+{
+	wavefront_patch_info *header;
+	int err;
+	
+	header = kmalloc(sizeof(*header), GFP_KERNEL);
+	if (! header)
+		return -ENOMEM;
+
+	if (copy_from_user (header, addr, sizeof(wavefront_patch_info) -
+			    sizeof(wavefront_any))) {
+		snd_printk ("bad address for load patch.\n");
+		err = -EFAULT;
+		goto __error;
+	}
+
+	DPRINT (WF_DEBUG_LOAD_PATCH, "download "
+				      "Sample type: %d "
+				      "Sample number: %d "
+				      "Sample size: %d\n",
+				      header->subkey,
+				      header->number,
+				      header->size);
+
+	switch (header->subkey) {
+	case WF_ST_SAMPLE:  /* sample or sample_header, based on patch->size */
+
+		if (copy_from_user (&header->hdr.s, header->hdrptr,
+				    sizeof (wavefront_sample))) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = wavefront_send_sample (dev, header, header->dataptr, 0);
+		break;
+
+	case WF_ST_MULTISAMPLE:
+
+		if (copy_from_user (&header->hdr.s, header->hdrptr,
+				    sizeof (wavefront_multisample))) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = wavefront_send_multisample (dev, header);
+		break;
+
+	case WF_ST_ALIAS:
+
+		if (copy_from_user (&header->hdr.a, header->hdrptr,
+				    sizeof (wavefront_alias))) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = wavefront_send_alias (dev, header);
+		break;
+
+	case WF_ST_DRUM:
+		if (copy_from_user (&header->hdr.d, header->hdrptr,
+				    sizeof (wavefront_drum))) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = wavefront_send_drum (dev, header);
+		break;
+
+	case WF_ST_PATCH:
+		if (copy_from_user (&header->hdr.p, header->hdrptr,
+				    sizeof (wavefront_patch))) {
+			err = -EFAULT;
+			break;
+		}
+		
+		err = wavefront_send_patch (dev, header);
+		break;
+
+	case WF_ST_PROGRAM:
+		if (copy_from_user (&header->hdr.pr, header->hdrptr,
+				    sizeof (wavefront_program))) {
+			err = -EFAULT;
+			break;
+		}
+
+		err = wavefront_send_program (dev, header);
+		break;
+
+	default:
+		snd_printk ("unknown patch type %d.\n",
+			    header->subkey);
+		err = -EINVAL;
+		break;
+	}
+
+ __error:
+	kfree(header);
+	return err;
+}
+
+/***********************************************************************
+WaveFront: hardware-dependent interface
+***********************************************************************/
+
+static void
+process_sample_hdr (u8 *buf)
+
+{
+	wavefront_sample s;
+	u8 *ptr;
+
+	ptr = buf;
+
+	/* The board doesn't send us an exact copy of a "wavefront_sample"
+	   in response to an Upload Sample Header command. Instead, we 
+	   have to convert the data format back into our data structure,
+	   just as in the Download Sample command, where we have to do
+	   something very similar in the reverse direction.
+	*/
+
+	*((u32 *) &s.sampleStartOffset) = demunge_int32 (ptr, 4); ptr += 4;
+	*((u32 *) &s.loopStartOffset) = demunge_int32 (ptr, 4); ptr += 4;
+	*((u32 *) &s.loopEndOffset) = demunge_int32 (ptr, 4); ptr += 4;
+	*((u32 *) &s.sampleEndOffset) = demunge_int32 (ptr, 4); ptr += 4;
+	*((u32 *) &s.FrequencyBias) = demunge_int32 (ptr, 3); ptr += 3;
+
+	s.SampleResolution = *ptr & 0x3;
+	s.Loop = *ptr & 0x8;
+	s.Bidirectional = *ptr & 0x10;
+	s.Reverse = *ptr & 0x40;
+
+	/* Now copy it back to where it came from */
+
+	memcpy (buf, (unsigned char *) &s, sizeof (wavefront_sample));
+}
+
+static int
+wavefront_synth_control (snd_wavefront_card_t *acard, 
+			 wavefront_control *wc)
+
+{
+	snd_wavefront_t *dev = &acard->wavefront;
+	unsigned char patchnumbuf[2];
+	int i;
+
+	DPRINT (WF_DEBUG_CMD, "synth control with "
+		"cmd 0x%x\n", wc->cmd);
+
+	/* Pre-handling of or for various commands */
+
+	switch (wc->cmd) {
+		
+	case WFC_DISABLE_INTERRUPTS:
+		snd_printk ("interrupts disabled.\n");
+		outb (0x80|0x20, dev->control_port);
+		dev->interrupts_are_midi = 1;
+		return 0;
+
+	case WFC_ENABLE_INTERRUPTS:
+		snd_printk ("interrupts enabled.\n");
+		outb (0x80|0x40|0x20, dev->control_port);
+		dev->interrupts_are_midi = 1;
+		return 0;
+
+	case WFC_INTERRUPT_STATUS:
+		wc->rbuf[0] = dev->interrupts_are_midi;
+		return 0;
+
+	case WFC_ROMSAMPLES_RDONLY:
+		dev->rom_samples_rdonly = wc->wbuf[0];
+		wc->status = 0;
+		return 0;
+
+	case WFC_IDENTIFY_SLOT_TYPE:
+		i = wc->wbuf[0] | (wc->wbuf[1] << 7);
+		if (i <0 || i >= WF_MAX_SAMPLE) {
+			snd_printk ("invalid slot ID %d\n",
+				i);
+			wc->status = EINVAL;
+			return -EINVAL;
+		}
+		wc->rbuf[0] = dev->sample_status[i];
+		wc->status = 0;
+		return 0;
+
+	case WFC_DEBUG_DRIVER:
+		dev->debug = wc->wbuf[0];
+		snd_printk ("debug = 0x%x\n", dev->debug);
+		return 0;
+
+	case WFC_UPLOAD_PATCH:
+		munge_int32 (*((u32 *) wc->wbuf), patchnumbuf, 2);
+		memcpy (wc->wbuf, patchnumbuf, 2);
+		break;
+
+	case WFC_UPLOAD_MULTISAMPLE:
+		/* multisamples have to be handled differently, and
+		   cannot be dealt with properly by snd_wavefront_cmd() alone.
+		*/
+		wc->status = wavefront_fetch_multisample
+			(dev, (wavefront_patch_info *) wc->rbuf);
+		return 0;
+
+	case WFC_UPLOAD_SAMPLE_ALIAS:
+		snd_printk ("support for sample alias upload "
+			"being considered.\n");
+		wc->status = EINVAL;
+		return -EINVAL;
+	}
+
+	wc->status = snd_wavefront_cmd (dev, wc->cmd, wc->rbuf, wc->wbuf);
+
+	/* Post-handling of certain commands.
+
+	   In particular, if the command was an upload, demunge the data
+	   so that the user-level doesn't have to think about it.
+	*/
+
+	if (wc->status == 0) {
+		switch (wc->cmd) {
+			/* intercept any freemem requests so that we know
+			   we are always current with the user-level view
+			   of things.
+			*/
+
+		case WFC_REPORT_FREE_MEMORY:
+			dev->freemem = demunge_int32 (wc->rbuf, 4);
+			break;
+
+		case WFC_UPLOAD_PATCH:
+			demunge_buf (wc->rbuf, wc->rbuf, WF_PATCH_BYTES);
+			break;
+
+		case WFC_UPLOAD_PROGRAM:
+			demunge_buf (wc->rbuf, wc->rbuf, WF_PROGRAM_BYTES);
+			break;
+
+		case WFC_UPLOAD_EDRUM_PROGRAM:
+			demunge_buf (wc->rbuf, wc->rbuf, WF_DRUM_BYTES - 1);
+			break;
+
+		case WFC_UPLOAD_SAMPLE_HEADER:
+			process_sample_hdr (wc->rbuf);
+			break;
+
+		case WFC_UPLOAD_SAMPLE_ALIAS:
+			snd_printk ("support for "
+				    "sample aliases still "
+				    "being considered.\n");
+			break;
+
+		case WFC_VMIDI_OFF:
+			snd_wavefront_midi_disable_virtual (acard);
+			break;
+
+		case WFC_VMIDI_ON:
+			snd_wavefront_midi_enable_virtual (acard);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+int 
+snd_wavefront_synth_open (struct snd_hwdep *hw, struct file *file)
+
+{
+	if (!try_module_get(hw->card->module))
+		return -EFAULT;
+	file->private_data = hw;
+	return 0;
+}
+
+int 
+snd_wavefront_synth_release (struct snd_hwdep *hw, struct file *file)
+
+{
+	module_put(hw->card->module);
+	return 0;
+}
+
+int
+snd_wavefront_synth_ioctl (struct snd_hwdep *hw, struct file *file,
+			   unsigned int cmd, unsigned long arg)
+
+{
+	struct snd_card *card;
+	snd_wavefront_t *dev;
+	snd_wavefront_card_t *acard;
+	wavefront_control *wc;
+	void __user *argp = (void __user *)arg;
+	int err;
+
+	card = (struct snd_card *) hw->card;
+
+	if (snd_BUG_ON(!card))
+		return -ENODEV;
+	if (snd_BUG_ON(!card->private_data))
+		return -ENODEV;
+
+	acard = card->private_data;
+	dev = &acard->wavefront;
+	
+	switch (cmd) {
+	case WFCTL_LOAD_SPP:
+		if (wavefront_load_patch (dev, argp) != 0) {
+			return -EIO;
+		}
+		break;
+
+	case WFCTL_WFCMD:
+		wc = memdup_user(argp, sizeof(*wc));
+		if (IS_ERR(wc))
+			return PTR_ERR(wc);
+
+		if (wavefront_synth_control (acard, wc) < 0)
+			err = -EIO;
+		else if (copy_to_user (argp, wc, sizeof (*wc)))
+			err = -EFAULT;
+		else
+			err = 0;
+		kfree(wc);
+		return err;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/***********************************************************************/
+/*  WaveFront: interface for card-level wavefront module               */
+/***********************************************************************/
+
+void
+snd_wavefront_internal_interrupt (snd_wavefront_card_t *card)
+{
+	snd_wavefront_t *dev = &card->wavefront;
+
+	/*
+	   Some comments on interrupts. I attempted a version of this
+	   driver that used interrupts throughout the code instead of
+	   doing busy and/or sleep-waiting. Alas, it appears that once
+	   the Motorola firmware is downloaded, the card *never*
+	   generates an RX interrupt. These are successfully generated
+	   during firmware loading, and after that wavefront_status()
+	   reports that an interrupt is pending on the card from time
+	   to time, but it never seems to be delivered to this
+	   driver. Note also that wavefront_status() continues to
+	   report that RX interrupts are enabled, suggesting that I
+	   didn't goof up and disable them by mistake.
+
+	   Thus, I stepped back to a prior version of
+	   wavefront_wait(), the only place where this really
+	   matters. Its sad, but I've looked through the code to check
+	   on things, and I really feel certain that the Motorola
+	   firmware prevents RX-ready interrupts.
+	*/
+
+	if ((wavefront_status(dev) & (STAT_INTR_READ|STAT_INTR_WRITE)) == 0) {
+		return;
+	}
+
+	spin_lock(&dev->irq_lock);
+	dev->irq_ok = 1;
+	dev->irq_cnt++;
+	spin_unlock(&dev->irq_lock);
+	wake_up(&dev->interrupt_sleeper);
+}
+
+/* STATUS REGISTER 
+
+0 Host Rx Interrupt Enable (1=Enabled)
+1 Host Rx Register Full (1=Full)
+2 Host Rx Interrupt Pending (1=Interrupt)
+3 Unused
+4 Host Tx Interrupt (1=Enabled)
+5 Host Tx Register empty (1=Empty)
+6 Host Tx Interrupt Pending (1=Interrupt)
+7 Unused
+*/
+
+static int __devinit
+snd_wavefront_interrupt_bits (int irq)
+
+{
+	int bits;
+
+	switch (irq) {
+	case 9:
+		bits = 0x00;
+		break;
+	case 5:
+		bits = 0x08;
+		break;
+	case 12:
+		bits = 0x10;
+		break;
+	case 15:
+		bits = 0x18;
+		break;
+	
+	default:
+		snd_printk ("invalid IRQ %d\n", irq);
+		bits = -1;
+	}
+
+	return bits;
+}
+
+static void __devinit
+wavefront_should_cause_interrupt (snd_wavefront_t *dev, 
+				  int val, int port, unsigned long timeout)
+
+{
+	wait_queue_t wait;
+
+	init_waitqueue_entry(&wait, current);
+	spin_lock_irq(&dev->irq_lock);
+	add_wait_queue(&dev->interrupt_sleeper, &wait);
+	dev->irq_ok = 0;
+	outb (val,port);
+	spin_unlock_irq(&dev->irq_lock);
+	while (!dev->irq_ok && time_before(jiffies, timeout)) {
+		schedule_timeout_uninterruptible(1);
+		barrier();
+	}
+}
+
+static int __devinit
+wavefront_reset_to_cleanliness (snd_wavefront_t *dev)
+
+{
+	int bits;
+	int hwv[2];
+
+	/* IRQ already checked */
+
+	bits = snd_wavefront_interrupt_bits (dev->irq);
+
+	/* try reset of port */
+
+	outb (0x0, dev->control_port); 
+  
+	/* At this point, the board is in reset, and the H/W initialization
+	   register is accessed at the same address as the data port.
+     
+	   Bit 7 - Enable IRQ Driver	
+	   0 - Tri-state the Wave-Board drivers for the PC Bus IRQs
+	   1 - Enable IRQ selected by bits 5:3 to be driven onto the PC Bus.
+     
+	   Bit 6 - MIDI Interface Select
+
+	   0 - Use the MIDI Input from the 26-pin WaveBlaster
+	   compatible header as the serial MIDI source
+	   1 - Use the MIDI Input from the 9-pin D connector as the
+	   serial MIDI source.
+     
+	   Bits 5:3 - IRQ Selection
+	   0 0 0 - IRQ 2/9
+	   0 0 1 - IRQ 5
+	   0 1 0 - IRQ 12
+	   0 1 1 - IRQ 15
+	   1 0 0 - Reserved
+	   1 0 1 - Reserved
+	   1 1 0 - Reserved
+	   1 1 1 - Reserved
+     
+	   Bits 2:1 - Reserved
+	   Bit 0 - Disable Boot ROM
+	   0 - memory accesses to 03FC30-03FFFFH utilize the internal Boot ROM
+	   1 - memory accesses to 03FC30-03FFFFH are directed to external 
+	   storage.
+     
+	*/
+
+	/* configure hardware: IRQ, enable interrupts, 
+	   plus external 9-pin MIDI interface selected
+	*/
+
+	outb (0x80 | 0x40 | bits, dev->data_port);	
+  
+	/* CONTROL REGISTER
+
+	   0 Host Rx Interrupt Enable (1=Enabled)      0x1
+	   1 Unused                                    0x2
+	   2 Unused                                    0x4
+	   3 Unused                                    0x8
+	   4 Host Tx Interrupt Enable                 0x10
+	   5 Mute (0=Mute; 1=Play)                    0x20
+	   6 Master Interrupt Enable (1=Enabled)      0x40
+	   7 Master Reset (0=Reset; 1=Run)            0x80
+
+	   Take us out of reset, mute output, master + TX + RX interrupts on.
+	   
+	   We'll get an interrupt presumably to tell us that the TX
+	   register is clear.
+	*/
+
+	wavefront_should_cause_interrupt(dev, 0x80|0x40|0x10|0x1,
+					 dev->control_port,
+					 (reset_time*HZ)/100);
+
+	/* Note: data port is now the data port, not the h/w initialization
+	   port.
+	 */
+
+	if (!dev->irq_ok) {
+		snd_printk ("intr not received after h/w un-reset.\n");
+		goto gone_bad;
+	} 
+
+	/* Note: data port is now the data port, not the h/w initialization
+	   port.
+
+	   At this point, only "HW VERSION" or "DOWNLOAD OS" commands
+	   will work. So, issue one of them, and wait for TX
+	   interrupt. This can take a *long* time after a cold boot,
+	   while the ISC ROM does its RAM test. The SDK says up to 4
+	   seconds - with 12MB of RAM on a Tropez+, it takes a lot
+	   longer than that (~16secs). Note that the card understands
+	   the difference between a warm and a cold boot, so
+	   subsequent ISC2115 reboots (say, caused by module
+	   reloading) will get through this much faster.
+
+	   XXX Interesting question: why is no RX interrupt received first ?
+	*/
+
+	wavefront_should_cause_interrupt(dev, WFC_HARDWARE_VERSION, 
+					 dev->data_port, ramcheck_time*HZ);
+
+	if (!dev->irq_ok) {
+		snd_printk ("post-RAM-check interrupt not received.\n");
+		goto gone_bad;
+	} 
+
+	if (!wavefront_wait (dev, STAT_CAN_READ)) {
+		snd_printk ("no response to HW version cmd.\n");
+		goto gone_bad;
+	}
+	
+	if ((hwv[0] = wavefront_read (dev)) == -1) {
+		snd_printk ("board not responding correctly.\n");
+		goto gone_bad;
+	}
+
+	if (hwv[0] == 0xFF) { /* NAK */
+
+		/* Board's RAM test failed. Try to read error code,
+		   and tell us about it either way.
+		*/
+		
+		if ((hwv[0] = wavefront_read (dev)) == -1) {
+			snd_printk ("on-board RAM test failed "
+				    "(bad error code).\n");
+		} else {
+			snd_printk ("on-board RAM test failed "
+				    "(error code: 0x%x).\n",
+				hwv[0]);
+		}
+		goto gone_bad;
+	}
+
+	/* We're OK, just get the next byte of the HW version response */
+
+	if ((hwv[1] = wavefront_read (dev)) == -1) {
+		snd_printk ("incorrect h/w response.\n");
+		goto gone_bad;
+	}
+
+	snd_printk ("hardware version %d.%d\n",
+		    hwv[0], hwv[1]);
+
+	return 0;
+
+
+     gone_bad:
+	return (1);
+}
+
+static int __devinit
+wavefront_download_firmware (snd_wavefront_t *dev, char *path)
+
+{
+	const unsigned char *buf;
+	int len, err;
+	int section_cnt_downloaded = 0;
+	const struct firmware *firmware;
+
+	err = request_firmware(&firmware, path, dev->card->dev);
+	if (err < 0) {
+		snd_printk(KERN_ERR "firmware (%s) download failed!!!\n", path);
+		return 1;
+	}
+
+	len = 0;
+	buf = firmware->data;
+	for (;;) {
+		int section_length = *(signed char *)buf;
+		if (section_length == 0)
+			break;
+		if (section_length < 0 || section_length > WF_SECTION_MAX) {
+			snd_printk(KERN_ERR
+				   "invalid firmware section length %d\n",
+				   section_length);
+			goto failure;
+		}
+		buf++;
+		len++;
+
+		if (firmware->size < len + section_length) {
+			snd_printk(KERN_ERR "firmware section read error.\n");
+			goto failure;
+		}
+
+		/* Send command */
+		if (wavefront_write(dev, WFC_DOWNLOAD_OS))
+			goto failure;
+	
+		for (; section_length; section_length--) {
+			if (wavefront_write(dev, *buf))
+				goto failure;
+			buf++;
+			len++;
+		}
+	
+		/* get ACK */
+		if (!wavefront_wait(dev, STAT_CAN_READ)) {
+			snd_printk(KERN_ERR "time out for firmware ACK.\n");
+			goto failure;
+		}
+		err = inb(dev->data_port);
+		if (err != WF_ACK) {
+			snd_printk(KERN_ERR
+				   "download of section #%d not "
+				   "acknowledged, ack = 0x%x\n",
+				   section_cnt_downloaded + 1, err);
+			goto failure;
+		}
+
+		section_cnt_downloaded++;
+	}
+
+	release_firmware(firmware);
+	return 0;
+
+ failure:
+	release_firmware(firmware);
+	snd_printk(KERN_ERR "firmware download failed!!!\n");
+	return 1;
+}
+
+
+static int __devinit
+wavefront_do_reset (snd_wavefront_t *dev)
+
+{
+	char voices[1];
+
+	if (wavefront_reset_to_cleanliness (dev)) {
+		snd_printk ("hw reset failed.\n");
+		goto gone_bad;
+	}
+
+	if (dev->israw) {
+		if (wavefront_download_firmware (dev, ospath)) {
+			goto gone_bad;
+		}
+
+		dev->israw = 0;
+
+		/* Wait for the OS to get running. The protocol for
+		   this is non-obvious, and was determined by
+		   using port-IO tracing in DOSemu and some
+		   experimentation here.
+		   
+		   Rather than using timed waits, use interrupts creatively.
+		*/
+
+		wavefront_should_cause_interrupt (dev, WFC_NOOP,
+						  dev->data_port,
+						  (osrun_time*HZ));
+
+		if (!dev->irq_ok) {
+			snd_printk ("no post-OS interrupt.\n");
+			goto gone_bad;
+		}
+		
+		/* Now, do it again ! */
+		
+		wavefront_should_cause_interrupt (dev, WFC_NOOP,
+						  dev->data_port, (10*HZ));
+		
+		if (!dev->irq_ok) {
+			snd_printk ("no post-OS interrupt(2).\n");
+			goto gone_bad;
+		}
+
+		/* OK, no (RX/TX) interrupts any more, but leave mute
+		   in effect. 
+		*/
+		
+		outb (0x80|0x40, dev->control_port); 
+	}
+
+	/* SETUPSND.EXE asks for sample memory config here, but since i
+	   have no idea how to interpret the result, we'll forget
+	   about it.
+	*/
+	
+	if ((dev->freemem = wavefront_freemem (dev)) < 0) {
+		goto gone_bad;
+	}
+		
+	snd_printk ("available DRAM %dk\n", dev->freemem / 1024);
+
+	if (wavefront_write (dev, 0xf0) ||
+	    wavefront_write (dev, 1) ||
+	    (wavefront_read (dev) < 0)) {
+		dev->debug = 0;
+		snd_printk ("MPU emulation mode not set.\n");
+		goto gone_bad;
+	}
+
+	voices[0] = 32;
+
+	if (snd_wavefront_cmd (dev, WFC_SET_NVOICES, NULL, voices)) {
+		snd_printk ("cannot set number of voices to 32.\n");
+		goto gone_bad;
+	}
+
+
+	return 0;
+
+ gone_bad:
+	/* reset that sucker so that it doesn't bother us. */
+
+	outb (0x0, dev->control_port);
+	dev->interrupts_are_midi = 0;
+	return 1;
+}
+
+int __devinit
+snd_wavefront_start (snd_wavefront_t *dev)
+
+{
+	int samples_are_from_rom;
+
+	/* IMPORTANT: assumes that snd_wavefront_detect() and/or
+	   wavefront_reset_to_cleanliness() has already been called 
+	*/
+
+	if (dev->israw) {
+		samples_are_from_rom = 1;
+	} else {
+		/* XXX is this always true ? */
+		samples_are_from_rom = 0;
+	}
+
+	if (dev->israw || fx_raw) {
+		if (wavefront_do_reset (dev)) {
+			return -1;
+		}
+	}
+	/* Check for FX device, present only on Tropez+ */
+
+	dev->has_fx = (snd_wavefront_fx_detect (dev) == 0);
+
+	if (dev->has_fx && fx_raw) {
+		snd_wavefront_fx_start (dev);
+	}
+
+	wavefront_get_sample_status (dev, samples_are_from_rom);
+	wavefront_get_program_status (dev);
+	wavefront_get_patch_status (dev);
+
+	/* Start normal operation: unreset, master interrupt enabled, no mute
+	*/
+
+	outb (0x80|0x40|0x20, dev->control_port); 
+
+	return (0);
+}
+
+int __devinit
+snd_wavefront_detect (snd_wavefront_card_t *card)
+
+{
+	unsigned char   rbuf[4], wbuf[4];
+	snd_wavefront_t *dev = &card->wavefront;
+	
+	/* returns zero if a WaveFront card is successfully detected.
+	   negative otherwise.
+	*/
+
+	dev->israw = 0;
+	dev->has_fx = 0;
+	dev->debug = debug_default;
+	dev->interrupts_are_midi = 0;
+	dev->irq_cnt = 0;
+	dev->rom_samples_rdonly = 1;
+
+	if (snd_wavefront_cmd (dev, WFC_FIRMWARE_VERSION, rbuf, wbuf) == 0) {
+
+		dev->fw_version[0] = rbuf[0];
+		dev->fw_version[1] = rbuf[1];
+
+		snd_printk ("firmware %d.%d already loaded.\n",
+			    rbuf[0], rbuf[1]);
+
+		/* check that a command actually works */
+      
+		if (snd_wavefront_cmd (dev, WFC_HARDWARE_VERSION,
+				       rbuf, wbuf) == 0) {
+			dev->hw_version[0] = rbuf[0];
+			dev->hw_version[1] = rbuf[1];
+		} else {
+			snd_printk ("not raw, but no "
+				    "hardware version!\n");
+			return -1;
+		}
+
+		if (!wf_raw) {
+			return 0;
+		} else {
+			snd_printk ("reloading firmware as you requested.\n");
+			dev->israw = 1;
+		}
+
+	} else {
+
+		dev->israw = 1;
+		snd_printk ("no response to firmware probe, assume raw.\n");
+
+	}
+
+	return 0;
+}
+
+MODULE_FIRMWARE(DEFAULT_OSPATH);