Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 1442 insertions, 0 deletions

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
new file mode 100644
index 00000000..48f937e1
--- /dev/null
+++ b/net/mac80211/iface.c
@@ -0,0 +1,1442 @@
+/*
+ * Interface handling (except master interface)
+ *
+ * Copyright 2002-2005, Instant802 Networks, Inc.
+ * Copyright 2005-2006, Devicescape Software, Inc.
+ * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
+ * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
+#include "ieee80211_i.h"
+#include "sta_info.h"
+#include "debugfs_netdev.h"
+#include "mesh.h"
+#include "led.h"
+#include "driver-ops.h"
+#include "wme.h"
+#include "rate.h"
+
+/**
+ * DOC: Interface list locking
+ *
+ * The interface list in each struct ieee80211_local is protected
+ * three-fold:
+ *
+ * (1) modifications may only be done under the RTNL
+ * (2) modifications and readers are protected against each other by
+ *     the iflist_mtx.
+ * (3) modifications are done in an RCU manner so atomic readers
+ *     can traverse the list in RCU-safe blocks.
+ *
+ * As a consequence, reads (traversals) of the list can be protected
+ * by either the RTNL, the iflist_mtx or RCU.
+ */
+
+
+static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int meshhdrlen;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
+
+	/* FIX: what would be proper limits for MTU?
+	 * This interface uses 802.3 frames. */
+	if (new_mtu < 256 ||
+	    new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static int ieee80211_change_mac(struct net_device *dev, void *addr)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct sockaddr *sa = addr;
+	int ret;
+
+	if (ieee80211_sdata_running(sdata))
+		return -EBUSY;
+
+	ret = eth_mac_addr(dev, sa);
+
+	if (ret == 0)
+		memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
+
+	return ret;
+}
+
+static inline int identical_mac_addr_allowed(int type1, int type2)
+{
+	return type1 == NL80211_IFTYPE_MONITOR ||
+		type2 == NL80211_IFTYPE_MONITOR ||
+		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
+		(type1 == NL80211_IFTYPE_WDS &&
+			(type2 == NL80211_IFTYPE_WDS ||
+			 type2 == NL80211_IFTYPE_AP)) ||
+		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
+		(type1 == NL80211_IFTYPE_AP_VLAN &&
+			(type2 == NL80211_IFTYPE_AP ||
+			 type2 == NL80211_IFTYPE_AP_VLAN));
+}
+
+static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
+					    enum nl80211_iftype iftype)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_sub_if_data *nsdata;
+	struct net_device *dev = sdata->dev;
+
+	ASSERT_RTNL();
+
+	/* we hold the RTNL here so can safely walk the list */
+	list_for_each_entry(nsdata, &local->interfaces, list) {
+		struct net_device *ndev = nsdata->dev;
+
+		if (ndev != dev && ieee80211_sdata_running(nsdata)) {
+			/*
+			 * Allow only a single IBSS interface to be up at any
+			 * time. This is restricted because beacon distribution
+			 * cannot work properly if both are in the same IBSS.
+			 *
+			 * To remove this restriction we'd have to disallow them
+			 * from setting the same SSID on different IBSS interfaces
+			 * belonging to the same hardware. Then, however, we're
+			 * faced with having to adopt two different TSF timers...
+			 */
+			if (iftype == NL80211_IFTYPE_ADHOC &&
+			    nsdata->vif.type == NL80211_IFTYPE_ADHOC)
+				return -EBUSY;
+
+			/*
+			 * The remaining checks are only performed for interfaces
+			 * with the same MAC address.
+			 */
+			if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
+				continue;
+
+			/*
+			 * check whether it may have the same address
+			 */
+			if (!identical_mac_addr_allowed(iftype,
+							nsdata->vif.type))
+				return -ENOTUNIQ;
+
+			/*
+			 * can only add VLANs to enabled APs
+			 */
+			if (iftype == NL80211_IFTYPE_AP_VLAN &&
+			    nsdata->vif.type == NL80211_IFTYPE_AP)
+				sdata->bss = &nsdata->u.ap;
+		}
+	}
+
+	return 0;
+}
+
+void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
+				    const int offset)
+{
+	struct ieee80211_local *local = sdata->local;
+	u32 flags = sdata->u.mntr_flags;
+
+#define ADJUST(_f, _s)	do {					\
+	if (flags & MONITOR_FLAG_##_f)				\
+		local->fif_##_s += offset;			\
+	} while (0)
+
+	ADJUST(FCSFAIL, fcsfail);
+	ADJUST(PLCPFAIL, plcpfail);
+	ADJUST(CONTROL, control);
+	ADJUST(CONTROL, pspoll);
+	ADJUST(OTHER_BSS, other_bss);
+
+#undef ADJUST
+}
+
+/*
+ * NOTE: Be very careful when changing this function, it must NOT return
+ * an error on interface type changes that have been pre-checked, so most
+ * checks should be in ieee80211_check_concurrent_iface.
+ */
+static int ieee80211_do_open(struct net_device *dev, bool coming_up)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	u32 changed = 0;
+	int res;
+	u32 hw_reconf_flags = 0;
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_WDS:
+		if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
+			return -ENOLINK;
+		break;
+	case NL80211_IFTYPE_AP_VLAN: {
+		struct ieee80211_sub_if_data *master;
+
+		if (!sdata->bss)
+			return -ENOLINK;
+
+		list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
+
+		master = container_of(sdata->bss,
+				      struct ieee80211_sub_if_data, u.ap);
+		sdata->control_port_protocol =
+			master->control_port_protocol;
+		sdata->control_port_no_encrypt =
+			master->control_port_no_encrypt;
+		break;
+		}
+	case NL80211_IFTYPE_AP:
+		sdata->bss = &sdata->u.ap;
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_ADHOC:
+		/* no special treatment */
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_GO:
+		/* cannot happen */
+		WARN_ON(1);
+		break;
+	}
+
+	if (local->open_count == 0) {
+		res = drv_start(local);
+		if (res)
+			goto err_del_bss;
+		if (local->ops->napi_poll)
+			napi_enable(&local->napi);
+		/* we're brought up, everything changes */
+		hw_reconf_flags = ~0;
+		ieee80211_led_radio(local, true);
+		ieee80211_mod_tpt_led_trig(local,
+					   IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
+	}
+
+	/*
+	 * Copy the hopefully now-present MAC address to
+	 * this interface, if it has the special null one.
+	 */
+	if (is_zero_ether_addr(dev->dev_addr)) {
+		memcpy(dev->dev_addr,
+		       local->hw.wiphy->perm_addr,
+		       ETH_ALEN);
+		memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
+
+		if (!is_valid_ether_addr(dev->dev_addr)) {
+			if (!local->open_count)
+				drv_stop(local);
+			return -EADDRNOTAVAIL;
+		}
+	}
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP_VLAN:
+		/* no need to tell driver */
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+			local->cooked_mntrs++;
+			break;
+		}
+
+		/* must be before the call to ieee80211_configure_filter */
+		local->monitors++;
+		if (local->monitors == 1) {
+			local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
+			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
+		}
+
+		ieee80211_adjust_monitor_flags(sdata, 1);
+		ieee80211_configure_filter(local);
+
+		netif_carrier_on(dev);
+		break;
+	default:
+		if (coming_up) {
+			res = drv_add_interface(local, sdata);
+			if (res)
+				goto err_stop;
+		}
+
+		if (sdata->vif.type == NL80211_IFTYPE_AP) {
+			local->fif_pspoll++;
+			local->fif_probe_req++;
+
+			ieee80211_configure_filter(local);
+		} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+			local->fif_probe_req++;
+		}
+
+		changed |= ieee80211_reset_erp_info(sdata);
+		ieee80211_bss_info_change_notify(sdata, changed);
+
+		if (sdata->vif.type == NL80211_IFTYPE_STATION ||
+		    sdata->vif.type == NL80211_IFTYPE_ADHOC)
+			netif_carrier_off(dev);
+		else
+			netif_carrier_on(dev);
+
+		/*
+		 * set default queue parameters so drivers don't
+		 * need to initialise the hardware if the hardware
+		 * doesn't start up with sane defaults
+		 */
+		ieee80211_set_wmm_default(sdata, true);
+	}
+
+	set_bit(SDATA_STATE_RUNNING, &sdata->state);
+
+	if (sdata->vif.type == NL80211_IFTYPE_WDS) {
+		/* Create STA entry for the WDS peer */
+		sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+				     GFP_KERNEL);
+		if (!sta) {
+			res = -ENOMEM;
+			goto err_del_interface;
+		}
+
+		sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
+		sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
+		sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
+
+		res = sta_info_insert(sta);
+		if (res) {
+			/* STA has been freed */
+			goto err_del_interface;
+		}
+
+		rate_control_rate_init(sta);
+	}
+
+	/*
+	 * set_multicast_list will be invoked by the networking core
+	 * which will check whether any increments here were done in
+	 * error and sync them down to the hardware as filter flags.
+	 */
+	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+		atomic_inc(&local->iff_allmultis);
+
+	if (sdata->flags & IEEE80211_SDATA_PROMISC)
+		atomic_inc(&local->iff_promiscs);
+
+	mutex_lock(&local->mtx);
+	hw_reconf_flags |= __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->mtx);
+
+	if (coming_up)
+		local->open_count++;
+
+	if (hw_reconf_flags)
+		ieee80211_hw_config(local, hw_reconf_flags);
+
+	ieee80211_recalc_ps(local, -1);
+
+	netif_tx_start_all_queues(dev);
+
+	return 0;
+ err_del_interface:
+	drv_remove_interface(local, sdata);
+ err_stop:
+	if (!local->open_count)
+		drv_stop(local);
+ err_del_bss:
+	sdata->bss = NULL;
+	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+		list_del(&sdata->u.vlan.list);
+	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
+	return res;
+}
+
+static int ieee80211_open(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	int err;
+
+	/* fail early if user set an invalid address */
+	if (!is_valid_ether_addr(dev->dev_addr))
+		return -EADDRNOTAVAIL;
+
+	err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
+	if (err)
+		return err;
+
+	return ieee80211_do_open(dev, true);
+}
+
+static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
+			      bool going_down)
+{
+	struct ieee80211_local *local = sdata->local;
+	unsigned long flags;
+	struct sk_buff *skb, *tmp;
+	u32 hw_reconf_flags = 0;
+	int i;
+	enum nl80211_channel_type orig_ct;
+
+	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
+
+	if (local->scan_sdata == sdata)
+		ieee80211_scan_cancel(local);
+
+	/*
+	 * Stop TX on this interface first.
+	 */
+	netif_tx_stop_all_queues(sdata->dev);
+
+	/*
+	 * Purge work for this interface.
+	 */
+	ieee80211_work_purge(sdata);
+
+	/*
+	 * Remove all stations associated with this interface.
+	 *
+	 * This must be done before calling ops->remove_interface()
+	 * because otherwise we can later invoke ops->sta_notify()
+	 * whenever the STAs are removed, and that invalidates driver
+	 * assumptions about always getting a vif pointer that is valid
+	 * (because if we remove a STA after ops->remove_interface()
+	 * the driver will have removed the vif info already!)
+	 *
+	 * This is relevant only in AP, WDS and mesh modes, since in
+	 * all other modes we've already removed all stations when
+	 * disconnecting etc.
+	 */
+	sta_info_flush(local, sdata);
+
+	/*
+	 * Don't count this interface for promisc/allmulti while it
+	 * is down. dev_mc_unsync() will invoke set_multicast_list
+	 * on the master interface which will sync these down to the
+	 * hardware as filter flags.
+	 */
+	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+		atomic_dec(&local->iff_allmultis);
+
+	if (sdata->flags & IEEE80211_SDATA_PROMISC)
+		atomic_dec(&local->iff_promiscs);
+
+	if (sdata->vif.type == NL80211_IFTYPE_AP) {
+		local->fif_pspoll--;
+		local->fif_probe_req--;
+	} else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+		local->fif_probe_req--;
+	}
+
+	netif_addr_lock_bh(sdata->dev);
+	spin_lock_bh(&local->filter_lock);
+	__hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
+			 sdata->dev->addr_len);
+	spin_unlock_bh(&local->filter_lock);
+	netif_addr_unlock_bh(sdata->dev);
+
+	ieee80211_configure_filter(local);
+
+	del_timer_sync(&local->dynamic_ps_timer);
+	cancel_work_sync(&local->dynamic_ps_enable_work);
+
+	/* APs need special treatment */
+	if (sdata->vif.type == NL80211_IFTYPE_AP) {
+		struct ieee80211_sub_if_data *vlan, *tmpsdata;
+		struct beacon_data *old_beacon =
+			rtnl_dereference(sdata->u.ap.beacon);
+		struct sk_buff *old_probe_resp =
+			rtnl_dereference(sdata->u.ap.probe_resp);
+
+		/* sdata_running will return false, so this will disable */
+		ieee80211_bss_info_change_notify(sdata,
+						 BSS_CHANGED_BEACON_ENABLED);
+
+		/* remove beacon and probe response */
+		RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
+		RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL);
+		synchronize_rcu();
+		kfree(old_beacon);
+		kfree_skb(old_probe_resp);
+
+		/* down all dependent devices, that is VLANs */
+		list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
+					 u.vlan.list)
+			dev_close(vlan->dev);
+		WARN_ON(!list_empty(&sdata->u.ap.vlans));
+
+		/* free all potentially still buffered bcast frames */
+		local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps_bc_buf);
+		skb_queue_purge(&sdata->u.ap.ps_bc_buf);
+	} else if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+		ieee80211_mgd_stop(sdata);
+	}
+
+	if (going_down)
+		local->open_count--;
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP_VLAN:
+		list_del(&sdata->u.vlan.list);
+		/* no need to tell driver */
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+			local->cooked_mntrs--;
+			break;
+		}
+
+		local->monitors--;
+		if (local->monitors == 0) {
+			local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
+			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
+		}
+
+		ieee80211_adjust_monitor_flags(sdata, -1);
+		ieee80211_configure_filter(local);
+		break;
+	default:
+		mutex_lock(&local->mtx);
+		if (local->hw_roc_dev == sdata->dev &&
+		    local->hw_roc_channel) {
+			/* ignore return value since this is racy */
+			drv_cancel_remain_on_channel(local);
+			ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+		}
+		mutex_unlock(&local->mtx);
+
+		flush_work(&local->hw_roc_start);
+		flush_work(&local->hw_roc_done);
+
+		flush_work(&sdata->work);
+		/*
+		 * When we get here, the interface is marked down.
+		 * Call synchronize_rcu() to wait for the RX path
+		 * should it be using the interface and enqueuing
+		 * frames at this very time on another CPU.
+		 */
+		synchronize_rcu();
+		skb_queue_purge(&sdata->skb_queue);
+
+		/*
+		 * Disable beaconing here for mesh only, AP and IBSS
+		 * are already taken care of.
+		 */
+		if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+			ieee80211_bss_info_change_notify(sdata,
+				BSS_CHANGED_BEACON_ENABLED);
+
+		/*
+		 * Free all remaining keys, there shouldn't be any,
+		 * except maybe group keys in AP more or WDS?
+		 */
+		ieee80211_free_keys(sdata);
+
+		if (going_down)
+			drv_remove_interface(local, sdata);
+	}
+
+	sdata->bss = NULL;
+
+	mutex_lock(&local->mtx);
+	hw_reconf_flags |= __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->mtx);
+
+	ieee80211_recalc_ps(local, -1);
+
+	if (local->open_count == 0) {
+		if (local->ops->napi_poll)
+			napi_disable(&local->napi);
+		ieee80211_clear_tx_pending(local);
+		ieee80211_stop_device(local);
+
+		/* no reconfiguring after stop! */
+		hw_reconf_flags = 0;
+	}
+
+	/* Re-calculate channel-type, in case there are multiple vifs
+	 * on different channel types.
+	 */
+	orig_ct = local->_oper_channel_type;
+	ieee80211_set_channel_type(local, NULL, NL80211_CHAN_NO_HT);
+
+	/* do after stop to avoid reconfiguring when we stop anyway */
+	if (hw_reconf_flags || (orig_ct != local->_oper_channel_type))
+		ieee80211_hw_config(local, hw_reconf_flags);
+
+	spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
+		skb_queue_walk_safe(&local->pending[i], skb, tmp) {
+			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+			if (info->control.vif == &sdata->vif) {
+				__skb_unlink(skb, &local->pending[i]);
+				dev_kfree_skb_irq(skb);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+}
+
+static int ieee80211_stop(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	ieee80211_do_stop(sdata, true);
+
+	return 0;
+}
+
+static void ieee80211_set_multicast_list(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	int allmulti, promisc, sdata_allmulti, sdata_promisc;
+
+	allmulti = !!(dev->flags & IFF_ALLMULTI);
+	promisc = !!(dev->flags & IFF_PROMISC);
+	sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
+	sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
+
+	if (allmulti != sdata_allmulti) {
+		if (dev->flags & IFF_ALLMULTI)
+			atomic_inc(&local->iff_allmultis);
+		else
+			atomic_dec(&local->iff_allmultis);
+		sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
+	}
+
+	if (promisc != sdata_promisc) {
+		if (dev->flags & IFF_PROMISC)
+			atomic_inc(&local->iff_promiscs);
+		else
+			atomic_dec(&local->iff_promiscs);
+		sdata->flags ^= IEEE80211_SDATA_PROMISC;
+	}
+	spin_lock_bh(&local->filter_lock);
+	__hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
+	spin_unlock_bh(&local->filter_lock);
+	ieee80211_queue_work(&local->hw, &local->reconfig_filter);
+}
+
+/*
+ * Called when the netdev is removed or, by the code below, before
+ * the interface type changes.
+ */
+static void ieee80211_teardown_sdata(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	int flushed;
+	int i;
+
+	/* free extra data */
+	ieee80211_free_keys(sdata);
+
+	ieee80211_debugfs_remove_netdev(sdata);
+
+	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
+		__skb_queue_purge(&sdata->fragments[i].skb_list);
+	sdata->fragment_next = 0;
+
+	if (ieee80211_vif_is_mesh(&sdata->vif))
+		mesh_rmc_free(sdata);
+
+	flushed = sta_info_flush(local, sdata);
+	WARN_ON(flushed);
+}
+
+static u16 ieee80211_netdev_select_queue(struct net_device *dev,
+					 struct sk_buff *skb)
+{
+	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+}
+
+static const struct net_device_ops ieee80211_dataif_ops = {
+	.ndo_open		= ieee80211_open,
+	.ndo_stop		= ieee80211_stop,
+	.ndo_uninit		= ieee80211_teardown_sdata,
+	.ndo_start_xmit		= ieee80211_subif_start_xmit,
+	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
+	.ndo_change_mtu 	= ieee80211_change_mtu,
+	.ndo_set_mac_address 	= ieee80211_change_mac,
+	.ndo_select_queue	= ieee80211_netdev_select_queue,
+};
+
+static u16 ieee80211_monitor_select_queue(struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hdr *hdr;
+	struct ieee80211_radiotap_header *rtap = (void *)skb->data;
+
+	if (local->hw.queues < 4)
+		return 0;
+
+	if (skb->len < 4 ||
+	    skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
+		return 0; /* doesn't matter, frame will be dropped */
+
+	hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
+
+	return ieee80211_select_queue_80211(local, skb, hdr);
+}
+
+static const struct net_device_ops ieee80211_monitorif_ops = {
+	.ndo_open		= ieee80211_open,
+	.ndo_stop		= ieee80211_stop,
+	.ndo_uninit		= ieee80211_teardown_sdata,
+	.ndo_start_xmit		= ieee80211_monitor_start_xmit,
+	.ndo_set_rx_mode	= ieee80211_set_multicast_list,
+	.ndo_change_mtu 	= ieee80211_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_select_queue	= ieee80211_monitor_select_queue,
+};
+
+static void ieee80211_if_setup(struct net_device *dev)
+{
+	ether_setup(dev);
+	dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+	dev->netdev_ops = &ieee80211_dataif_ops;
+	dev->destructor = free_netdev;
+}
+
+static void ieee80211_iface_work(struct work_struct *work)
+{
+	struct ieee80211_sub_if_data *sdata =
+		container_of(work, struct ieee80211_sub_if_data, work);
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct sta_info *sta;
+	struct ieee80211_ra_tid *ra_tid;
+
+	if (!ieee80211_sdata_running(sdata))
+		return;
+
+	if (local->scanning)
+		return;
+
+	/*
+	 * ieee80211_queue_work() should have picked up most cases,
+	 * here we'll pick the rest.
+	 */
+	if (WARN(local->suspended,
+		 "interface work scheduled while going to suspend\n"))
+		return;
+
+	/* first process frames */
+	while ((skb = skb_dequeue(&sdata->skb_queue))) {
+		struct ieee80211_mgmt *mgmt = (void *)skb->data;
+
+		if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) {
+			ra_tid = (void *)&skb->cb;
+			ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra,
+						 ra_tid->tid);
+		} else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) {
+			ra_tid = (void *)&skb->cb;
+			ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra,
+						ra_tid->tid);
+		} else if (ieee80211_is_action(mgmt->frame_control) &&
+			   mgmt->u.action.category == WLAN_CATEGORY_BACK) {
+			int len = skb->len;
+
+			mutex_lock(&local->sta_mtx);
+			sta = sta_info_get_bss(sdata, mgmt->sa);
+			if (sta) {
+				switch (mgmt->u.action.u.addba_req.action_code) {
+				case WLAN_ACTION_ADDBA_REQ:
+					ieee80211_process_addba_request(
+							local, sta, mgmt, len);
+					break;
+				case WLAN_ACTION_ADDBA_RESP:
+					ieee80211_process_addba_resp(local, sta,
+								     mgmt, len);
+					break;
+				case WLAN_ACTION_DELBA:
+					ieee80211_process_delba(sdata, sta,
+								mgmt, len);
+					break;
+				default:
+					WARN_ON(1);
+					break;
+				}
+			}
+			mutex_unlock(&local->sta_mtx);
+		} else if (ieee80211_is_data_qos(mgmt->frame_control)) {
+			struct ieee80211_hdr *hdr = (void *)mgmt;
+			/*
+			 * So the frame isn't mgmt, but frame_control
+			 * is at the right place anyway, of course, so
+			 * the if statement is correct.
+			 *
+			 * Warn if we have other data frame types here,
+			 * they must not get here.
+			 */
+			WARN_ON(hdr->frame_control &
+					cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
+			WARN_ON(!(hdr->seq_ctrl &
+					cpu_to_le16(IEEE80211_SCTL_FRAG)));
+			/*
+			 * This was a fragment of a frame, received while
+			 * a block-ack session was active. That cannot be
+			 * right, so terminate the session.
+			 */
+			mutex_lock(&local->sta_mtx);
+			sta = sta_info_get_bss(sdata, mgmt->sa);
+			if (sta) {
+				u16 tid = *ieee80211_get_qos_ctl(hdr) &
+						IEEE80211_QOS_CTL_TID_MASK;
+
+				__ieee80211_stop_rx_ba_session(
+					sta, tid, WLAN_BACK_RECIPIENT,
+					WLAN_REASON_QSTA_REQUIRE_SETUP,
+					true);
+			}
+			mutex_unlock(&local->sta_mtx);
+		} else switch (sdata->vif.type) {
+		case NL80211_IFTYPE_STATION:
+			ieee80211_sta_rx_queued_mgmt(sdata, skb);
+			break;
+		case NL80211_IFTYPE_ADHOC:
+			ieee80211_ibss_rx_queued_mgmt(sdata, skb);
+			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			if (!ieee80211_vif_is_mesh(&sdata->vif))
+				break;
+			ieee80211_mesh_rx_queued_mgmt(sdata, skb);
+			break;
+		default:
+			WARN(1, "frame for unexpected interface type");
+			break;
+		}
+
+		kfree_skb(skb);
+	}
+
+	/* then other type-dependent work */
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_STATION:
+		ieee80211_sta_work(sdata);
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ieee80211_ibss_work(sdata);
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+		if (!ieee80211_vif_is_mesh(&sdata->vif))
+			break;
+		ieee80211_mesh_work(sdata);
+		break;
+	default:
+		break;
+	}
+}
+
+
+/*
+ * Helper function to initialise an interface to a specific type.
+ */
+static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
+				  enum nl80211_iftype type)
+{
+	/* clear type-dependent union */
+	memset(&sdata->u, 0, sizeof(sdata->u));
+
+	/* and set some type-dependent values */
+	sdata->vif.type = type;
+	sdata->vif.p2p = false;
+	sdata->dev->netdev_ops = &ieee80211_dataif_ops;
+	sdata->wdev.iftype = type;
+
+	sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
+	sdata->control_port_no_encrypt = false;
+
+	sdata->noack_map = 0;
+
+	/* only monitor differs */
+	sdata->dev->type = ARPHRD_ETHER;
+
+	skb_queue_head_init(&sdata->skb_queue);
+	INIT_WORK(&sdata->work, ieee80211_iface_work);
+
+	switch (type) {
+	case NL80211_IFTYPE_P2P_GO:
+		type = NL80211_IFTYPE_AP;
+		sdata->vif.type = type;
+		sdata->vif.p2p = true;
+		/* fall through */
+	case NL80211_IFTYPE_AP:
+		skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
+		INIT_LIST_HEAD(&sdata->u.ap.vlans);
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+		type = NL80211_IFTYPE_STATION;
+		sdata->vif.type = type;
+		sdata->vif.p2p = true;
+		/* fall through */
+	case NL80211_IFTYPE_STATION:
+		ieee80211_sta_setup_sdata(sdata);
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ieee80211_ibss_setup_sdata(sdata);
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+		if (ieee80211_vif_is_mesh(&sdata->vif))
+			ieee80211_mesh_init_sdata(sdata);
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
+		sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
+		sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
+				      MONITOR_FLAG_OTHER_BSS;
+		break;
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_AP_VLAN:
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+		BUG();
+		break;
+	}
+
+	ieee80211_debugfs_add_netdev(sdata);
+}
+
+static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
+					   enum nl80211_iftype type)
+{
+	struct ieee80211_local *local = sdata->local;
+	int ret, err;
+	enum nl80211_iftype internal_type = type;
+	bool p2p = false;
+
+	ASSERT_RTNL();
+
+	if (!local->ops->change_interface)
+		return -EBUSY;
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		/*
+		 * Could maybe also all others here?
+		 * Just not sure how that interacts
+		 * with the RX/config path e.g. for
+		 * mesh.
+		 */
+		break;
+	default:
+		return -EBUSY;
+	}
+
+	switch (type) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		/*
+		 * Could probably support everything
+		 * but WDS here (WDS do_open can fail
+		 * under memory pressure, which this
+		 * code isn't prepared to handle).
+		 */
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+		p2p = true;
+		internal_type = NL80211_IFTYPE_STATION;
+		break;
+	case NL80211_IFTYPE_P2P_GO:
+		p2p = true;
+		internal_type = NL80211_IFTYPE_AP;
+		break;
+	default:
+		return -EBUSY;
+	}
+
+	ret = ieee80211_check_concurrent_iface(sdata, internal_type);
+	if (ret)
+		return ret;
+
+	ieee80211_do_stop(sdata, false);
+
+	ieee80211_teardown_sdata(sdata->dev);
+
+	ret = drv_change_interface(local, sdata, internal_type, p2p);
+	if (ret)
+		type = sdata->vif.type;
+
+	ieee80211_setup_sdata(sdata, type);
+
+	err = ieee80211_do_open(sdata->dev, false);
+	WARN(err, "type change: do_open returned %d", err);
+
+	return ret;
+}
+
+int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
+			     enum nl80211_iftype type)
+{
+	int ret;
+
+	ASSERT_RTNL();
+
+	if (type == ieee80211_vif_type_p2p(&sdata->vif))
+		return 0;
+
+	/* Setting ad-hoc mode on non-IBSS channel is not supported. */
+	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
+	    type == NL80211_IFTYPE_ADHOC)
+		return -EOPNOTSUPP;
+
+	if (ieee80211_sdata_running(sdata)) {
+		ret = ieee80211_runtime_change_iftype(sdata, type);
+		if (ret)
+			return ret;
+	} else {
+		/* Purge and reset type-dependent state. */
+		ieee80211_teardown_sdata(sdata->dev);
+		ieee80211_setup_sdata(sdata, type);
+	}
+
+	/* reset some values that shouldn't be kept across type changes */
+	sdata->vif.bss_conf.basic_rates =
+		ieee80211_mandatory_rates(sdata->local,
+			sdata->local->hw.conf.channel->band);
+	sdata->drop_unencrypted = 0;
+	if (type == NL80211_IFTYPE_STATION)
+		sdata->u.mgd.use_4addr = false;
+
+	return 0;
+}
+
+static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
+				       struct net_device *dev,
+				       enum nl80211_iftype type)
+{
+	struct ieee80211_sub_if_data *sdata;
+	u64 mask, start, addr, val, inc;
+	u8 *m;
+	u8 tmp_addr[ETH_ALEN];
+	int i;
+
+	/* default ... something at least */
+	memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
+
+	if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
+	    local->hw.wiphy->n_addresses <= 1)
+		return;
+
+
+	mutex_lock(&local->iflist_mtx);
+
+	switch (type) {
+	case NL80211_IFTYPE_MONITOR:
+		/* doesn't matter */
+		break;
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_AP_VLAN:
+		/* match up with an AP interface */
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			if (sdata->vif.type != NL80211_IFTYPE_AP)
+				continue;
+			memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN);
+			break;
+		}
+		/* keep default if no AP interface present */
+		break;
+	default:
+		/* assign a new address if possible -- try n_addresses first */
+		for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
+			bool used = false;
+
+			list_for_each_entry(sdata, &local->interfaces, list) {
+				if (memcmp(local->hw.wiphy->addresses[i].addr,
+					   sdata->vif.addr, ETH_ALEN) == 0) {
+					used = true;
+					break;
+				}
+			}
+
+			if (!used) {
+				memcpy(dev->perm_addr,
+				       local->hw.wiphy->addresses[i].addr,
+				       ETH_ALEN);
+				break;
+			}
+		}
+
+		/* try mask if available */
+		if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
+			break;
+
+		m = local->hw.wiphy->addr_mask;
+		mask =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
+			((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
+			((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
+
+		if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
+			/* not a contiguous mask ... not handled now! */
+			printk(KERN_DEBUG "not contiguous\n");
+			break;
+		}
+
+		m = local->hw.wiphy->perm_addr;
+		start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
+			((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
+			((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
+
+		inc = 1ULL<<__ffs64(mask);
+		val = (start & mask);
+		addr = (start & ~mask) | (val & mask);
+		do {
+			bool used = false;
+
+			tmp_addr[5] = addr >> 0*8;
+			tmp_addr[4] = addr >> 1*8;
+			tmp_addr[3] = addr >> 2*8;
+			tmp_addr[2] = addr >> 3*8;
+			tmp_addr[1] = addr >> 4*8;
+			tmp_addr[0] = addr >> 5*8;
+
+			val += inc;
+
+			list_for_each_entry(sdata, &local->interfaces, list) {
+				if (memcmp(tmp_addr, sdata->vif.addr,
+							ETH_ALEN) == 0) {
+					used = true;
+					break;
+				}
+			}
+
+			if (!used) {
+				memcpy(dev->perm_addr, tmp_addr, ETH_ALEN);
+				break;
+			}
+			addr = (start & ~mask) | (val & mask);
+		} while (addr != start);
+
+		break;
+	}
+
+	mutex_unlock(&local->iflist_mtx);
+}
+
+int ieee80211_if_add(struct ieee80211_local *local, const char *name,
+		     struct net_device **new_dev, enum nl80211_iftype type,
+		     struct vif_params *params)
+{
+	struct net_device *ndev;
+	struct ieee80211_sub_if_data *sdata = NULL;
+	int ret, i;
+
+	ASSERT_RTNL();
+
+	ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size,
+				name, ieee80211_if_setup, local->hw.queues, 1);
+	if (!ndev)
+		return -ENOMEM;
+	dev_net_set(ndev, wiphy_net(local->hw.wiphy));
+
+	ndev->needed_headroom = local->tx_headroom +
+				4*6 /* four MAC addresses */
+				+ 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
+				+ 6 /* mesh */
+				+ 8 /* rfc1042/bridge tunnel */
+				- ETH_HLEN /* ethernet hard_header_len */
+				+ IEEE80211_ENCRYPT_HEADROOM;
+	ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+
+	ret = dev_alloc_name(ndev, ndev->name);
+	if (ret < 0)
+		goto fail;
+
+	ieee80211_assign_perm_addr(local, ndev, type);
+	memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
+	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
+
+	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
+	sdata = netdev_priv(ndev);
+	ndev->ieee80211_ptr = &sdata->wdev;
+	memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
+	memcpy(sdata->name, ndev->name, IFNAMSIZ);
+
+	/* initialise type-independent data */
+	sdata->wdev.wiphy = local->hw.wiphy;
+	sdata->local = local;
+	sdata->dev = ndev;
+#ifdef CONFIG_INET
+	sdata->arp_filter_state = true;
+#endif
+
+	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
+		skb_queue_head_init(&sdata->fragments[i].skb_list);
+
+	INIT_LIST_HEAD(&sdata->key_list);
+
+	for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+		struct ieee80211_supported_band *sband;
+		sband = local->hw.wiphy->bands[i];
+		sdata->rc_rateidx_mask[i] =
+			sband ? (1 << sband->n_bitrates) - 1 : 0;
+		if (sband)
+			memcpy(sdata->rc_rateidx_mcs_mask[i],
+			       sband->ht_cap.mcs.rx_mask,
+			       sizeof(sdata->rc_rateidx_mcs_mask[i]));
+		else
+			memset(sdata->rc_rateidx_mcs_mask[i], 0,
+			       sizeof(sdata->rc_rateidx_mcs_mask[i]));
+	}
+
+	/* setup type-dependent data */
+	ieee80211_setup_sdata(sdata, type);
+
+	if (params) {
+		ndev->ieee80211_ptr->use_4addr = params->use_4addr;
+		if (type == NL80211_IFTYPE_STATION)
+			sdata->u.mgd.use_4addr = params->use_4addr;
+	}
+
+	ret = register_netdevice(ndev);
+	if (ret)
+		goto fail;
+
+	mutex_lock(&local->iflist_mtx);
+	list_add_tail_rcu(&sdata->list, &local->interfaces);
+	mutex_unlock(&local->iflist_mtx);
+
+	if (new_dev)
+		*new_dev = ndev;
+
+	return 0;
+
+ fail:
+	free_netdev(ndev);
+	return ret;
+}
+
+void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
+{
+	ASSERT_RTNL();
+
+	mutex_lock(&sdata->local->iflist_mtx);
+	list_del_rcu(&sdata->list);
+	mutex_unlock(&sdata->local->iflist_mtx);
+
+	if (ieee80211_vif_is_mesh(&sdata->vif))
+		mesh_path_flush_by_iface(sdata);
+
+	synchronize_rcu();
+	unregister_netdevice(sdata->dev);
+}
+
+/*
+ * Remove all interfaces, may only be called at hardware unregistration
+ * time because it doesn't do RCU-safe list removals.
+ */
+void ieee80211_remove_interfaces(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata, *tmp;
+	LIST_HEAD(unreg_list);
+
+	ASSERT_RTNL();
+
+	mutex_lock(&local->iflist_mtx);
+	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
+		list_del(&sdata->list);
+
+		if (ieee80211_vif_is_mesh(&sdata->vif))
+			mesh_path_flush_by_iface(sdata);
+
+		unregister_netdevice_queue(sdata->dev, &unreg_list);
+	}
+	mutex_unlock(&local->iflist_mtx);
+	unregister_netdevice_many(&unreg_list);
+	list_del(&unreg_list);
+}
+
+static u32 ieee80211_idle_off(struct ieee80211_local *local,
+			      const char *reason)
+{
+	if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
+		return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	wiphy_debug(local->hw.wiphy, "device no longer idle - %s\n", reason);
+#endif
+
+	local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+static u32 ieee80211_idle_on(struct ieee80211_local *local)
+{
+	if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
+		return 0;
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	wiphy_debug(local->hw.wiphy, "device now idle\n");
+#endif
+
+	drv_flush(local, false);
+
+	local->hw.conf.flags |= IEEE80211_CONF_IDLE;
+	return IEEE80211_CONF_CHANGE_IDLE;
+}
+
+u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	struct ieee80211_sub_if_data *sdata;
+	int count = 0;
+	bool working = false, scanning = false, hw_roc = false;
+	struct ieee80211_work *wk;
+	unsigned int led_trig_start = 0, led_trig_stop = 0;
+
+#ifdef CONFIG_PROVE_LOCKING
+	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
+		!lockdep_is_held(&local->iflist_mtx));
+#endif
+	lockdep_assert_held(&local->mtx);
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata)) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+
+		sdata->old_idle = sdata->vif.bss_conf.idle;
+
+		/* do not count disabled managed interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    !sdata->u.mgd.associated &&
+		    !sdata->u.mgd.auth_data &&
+		    !sdata->u.mgd.assoc_data) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+		/* do not count unused IBSS interfaces */
+		if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+		    !sdata->u.ibss.ssid_len) {
+			sdata->vif.bss_conf.idle = true;
+			continue;
+		}
+		/* count everything else */
+		sdata->vif.bss_conf.idle = false;
+		count++;
+	}
+
+	list_for_each_entry(wk, &local->work_list, list) {
+		working = true;
+		wk->sdata->vif.bss_conf.idle = false;
+	}
+
+	if (local->scan_sdata &&
+	    !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
+		scanning = true;
+		local->scan_sdata->vif.bss_conf.idle = false;
+	}
+
+	if (local->hw_roc_channel)
+		hw_roc = true;
+
+	list_for_each_entry(sdata, &local->interfaces, list) {
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
+		if (sdata->old_idle == sdata->vif.bss_conf.idle)
+			continue;
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
+	}
+
+	if (working || scanning || hw_roc)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+
+	if (count)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+
+	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
+
+	if (hw_roc)
+		return ieee80211_idle_off(local, "hw remain-on-channel");
+	if (working)
+		return ieee80211_idle_off(local, "working");
+	if (scanning)
+		return ieee80211_idle_off(local, "scanning");
+	if (!count)
+		return ieee80211_idle_on(local);
+	else
+		return ieee80211_idle_off(local, "in use");
+
+	return 0;
+}
+
+void ieee80211_recalc_idle(struct ieee80211_local *local)
+{
+	u32 chg;
+
+	mutex_lock(&local->iflist_mtx);
+	chg = __ieee80211_recalc_idle(local);
+	mutex_unlock(&local->iflist_mtx);
+	if (chg)
+		ieee80211_hw_config(local, chg);
+}
+
+static int netdev_notify(struct notifier_block *nb,
+			 unsigned long state,
+			 void *ndev)
+{
+	struct net_device *dev = ndev;
+	struct ieee80211_sub_if_data *sdata;
+
+	if (state != NETDEV_CHANGENAME)
+		return 0;
+
+	if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
+		return 0;
+
+	if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
+		return 0;
+
+	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	memcpy(sdata->name, dev->name, IFNAMSIZ);
+
+	ieee80211_debugfs_rename_netdev(sdata);
+	return 0;
+}
+
+static struct notifier_block mac80211_netdev_notifier = {
+	.notifier_call = netdev_notify,
+};
+
+int ieee80211_iface_init(void)
+{
+	return register_netdevice_notifier(&mac80211_netdev_notifier);
+}
+
+void ieee80211_iface_exit(void)
+{
+	unregister_netdevice_notifier(&mac80211_netdev_notifier);
+}