Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 292 insertions, 0 deletions

diff --git a/include/linux/cd1400.h b/include/linux/cd1400.h
new file mode 100644
index 00000000..1dc3ab05
--- /dev/null
+++ b/include/linux/cd1400.h
@@ -0,0 +1,292 @@
+/*****************************************************************************/
+
+/*
+ *	cd1400.h  -- cd1400 UART hardware info.
+ *
+ *	Copyright (C) 1996-1998  Stallion Technologies
+ *	Copyright (C) 1994-1996  Greg Ungerer.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*****************************************************************************/
+#ifndef	_CD1400_H
+#define	_CD1400_H
+/*****************************************************************************/
+
+/*
+ *	Define the number of async ports per cd1400 uart chip.
+ */
+#define	CD1400_PORTS		4
+
+/*
+ *	Define the cd1400 uarts internal FIFO sizes.
+ */
+#define	CD1400_TXFIFOSIZE	12
+#define	CD1400_RXFIFOSIZE	12
+
+/*
+ *	Local RX FIFO thresh hold level. Also define the RTS thresh hold
+ *	based on the RX thresh hold.
+ */
+#define	FIFO_RXTHRESHOLD	6
+#define	FIFO_RTSTHRESHOLD	7
+
+/*****************************************************************************/
+
+/*
+ *	Define the cd1400 register addresses. These are all the valid
+ *	registers with the cd1400. Some are global, some virtual, some
+ *	per port.
+ */
+#define	GFRCR		0x40
+#define	CAR		0x68
+#define	GCR		0x4b
+#define	SVRR		0x67
+#define	RICR		0x44
+#define	TICR		0x45
+#define	MICR		0x46
+#define	RIR		0x6b
+#define	TIR		0x6a
+#define	MIR		0x69
+#define	PPR		0x7e
+
+#define	RIVR		0x43
+#define	TIVR		0x42
+#define	MIVR		0x41
+#define	TDR		0x63
+#define	RDSR		0x62
+#define	MISR		0x4c
+#define	EOSRR		0x60
+
+#define	LIVR		0x18
+#define	CCR		0x05
+#define	SRER		0x06
+#define	COR1		0x08
+#define	COR2		0x09
+#define	COR3		0x0a
+#define	COR4		0x1e
+#define	COR5		0x1f
+#define	CCSR		0x0b
+#define	RDCR		0x0e
+#define	SCHR1		0x1a
+#define	SCHR2		0x1b
+#define	SCHR3		0x1c
+#define	SCHR4		0x1d
+#define	SCRL		0x22
+#define	SCRH		0x23
+#define	LNC		0x24
+#define	MCOR1		0x15
+#define	MCOR2		0x16
+#define	RTPR		0x21
+#define	MSVR1		0x6c
+#define	MSVR2		0x6d
+#define	PSVR		0x6f
+#define	RBPR		0x78
+#define	RCOR		0x7c
+#define	TBPR		0x72
+#define	TCOR		0x76
+
+/*****************************************************************************/
+
+/*
+ *	Define the set of baud rate clock divisors.
+ */
+#define	CD1400_CLK0	8
+#define	CD1400_CLK1	32
+#define	CD1400_CLK2	128
+#define	CD1400_CLK3	512
+#define	CD1400_CLK4	2048
+
+#define	CD1400_NUMCLKS	5
+
+/*****************************************************************************/
+
+/*
+ *	Define the clock pre-scalar value to be a 5 ms clock. This should be
+ *	OK for now. It would probably be better to make it 10 ms, but we
+ *	can't fit that divisor into 8 bits!
+ */
+#define	PPR_SCALAR	244
+
+/*****************************************************************************/
+
+/*
+ *	Define values used to set character size options.
+ */
+#define	COR1_CHL5	0x00
+#define	COR1_CHL6	0x01
+#define	COR1_CHL7	0x02
+#define	COR1_CHL8	0x03
+
+/*
+ *	Define values used to set the number of stop bits.
+ */
+#define	COR1_STOP1	0x00
+#define	COR1_STOP15	0x04
+#define	COR1_STOP2	0x08
+
+/*
+ *	Define values used to set the parity scheme in use.
+ */
+#define	COR1_PARNONE	0x00
+#define	COR1_PARFORCE	0x20
+#define	COR1_PARENB	0x40
+#define	COR1_PARIGNORE	0x10
+
+#define	COR1_PARODD	0x80
+#define	COR1_PAREVEN	0x00
+
+#define	COR2_IXM	0x80
+#define	COR2_TXIBE	0x40
+#define	COR2_ETC	0x20
+#define	COR2_LLM	0x10
+#define	COR2_RLM	0x08
+#define	COR2_RTSAO	0x04
+#define	COR2_CTSAE	0x02
+
+#define	COR3_SCDRNG	0x80
+#define	COR3_SCD34	0x40
+#define	COR3_FCT	0x20
+#define	COR3_SCD12	0x10
+
+/*
+ *	Define values used by COR4.
+ */
+#define	COR4_BRKINT	0x08
+#define	COR4_IGNBRK	0x18
+
+/*****************************************************************************/
+
+/*
+ *	Define the modem control register values.
+ *	Note that the actual hardware is a little different to the conventional
+ *	pin names on the cd1400.
+ */
+#define	MSVR1_DTR	0x01
+#define	MSVR1_DSR	0x10
+#define	MSVR1_RI	0x20
+#define	MSVR1_CTS	0x40
+#define	MSVR1_DCD	0x80
+
+#define	MSVR2_RTS	0x02
+#define	MSVR2_DSR	0x10
+#define	MSVR2_RI	0x20
+#define	MSVR2_CTS	0x40
+#define	MSVR2_DCD	0x80
+
+#define	MCOR1_DCD	0x80
+#define	MCOR1_CTS	0x40
+#define	MCOR1_RI	0x20
+#define	MCOR1_DSR	0x10
+
+#define	MCOR2_DCD	0x80
+#define	MCOR2_CTS	0x40
+#define	MCOR2_RI	0x20
+#define	MCOR2_DSR	0x10
+
+/*****************************************************************************/
+
+/*
+ *	Define the bits used with the service (interrupt) enable register.
+ */
+#define	SRER_NNDT	0x01
+#define	SRER_TXEMPTY	0x02
+#define	SRER_TXDATA	0x04
+#define	SRER_RXDATA	0x10
+#define	SRER_MODEM	0x80
+
+/*****************************************************************************/
+
+/*
+ *	Define operational commands for the command register.
+ */
+#define	CCR_RESET	0x80
+#define	CCR_CORCHANGE	0x4e
+#define	CCR_SENDCH	0x20
+#define	CCR_CHANCTRL	0x10
+
+#define	CCR_TXENABLE	(CCR_CHANCTRL | 0x08)
+#define	CCR_TXDISABLE	(CCR_CHANCTRL | 0x04)
+#define	CCR_RXENABLE	(CCR_CHANCTRL | 0x02)
+#define	CCR_RXDISABLE	(CCR_CHANCTRL | 0x01)
+
+#define	CCR_SENDSCHR1	(CCR_SENDCH | 0x01)
+#define	CCR_SENDSCHR2	(CCR_SENDCH | 0x02)
+#define	CCR_SENDSCHR3	(CCR_SENDCH | 0x03)
+#define	CCR_SENDSCHR4	(CCR_SENDCH | 0x04)
+
+#define	CCR_RESETCHAN	(CCR_RESET | 0x00)
+#define	CCR_RESETFULL	(CCR_RESET | 0x01)
+#define	CCR_TXFLUSHFIFO	(CCR_RESET | 0x02)
+
+#define	CCR_MAXWAIT	10000
+
+/*****************************************************************************/
+
+/*
+ *	Define the valid acknowledgement types (for hw ack cycle).
+ */
+#define	ACK_TYPMASK	0x07
+#define	ACK_TYPTX	0x02
+#define	ACK_TYPMDM	0x01
+#define	ACK_TYPRXGOOD	0x03
+#define	ACK_TYPRXBAD	0x07
+
+#define	SVRR_RX		0x01
+#define	SVRR_TX		0x02
+#define	SVRR_MDM	0x04
+
+#define	ST_OVERRUN	0x01
+#define	ST_FRAMING	0x02
+#define	ST_PARITY	0x04
+#define	ST_BREAK	0x08
+#define	ST_SCHAR1	0x10
+#define	ST_SCHAR2	0x20
+#define	ST_SCHAR3	0x30
+#define	ST_SCHAR4	0x40
+#define	ST_RANGE	0x70
+#define	ST_SCHARMASK	0x70
+#define	ST_TIMEOUT	0x80
+
+#define	MISR_DCD	0x80
+#define	MISR_CTS	0x40
+#define	MISR_RI		0x20
+#define	MISR_DSR	0x10
+
+/*****************************************************************************/
+
+/*
+ *	Defines for the CCSR status register.
+ */
+#define	CCSR_RXENABLED	0x80
+#define	CCSR_RXFLOWON	0x40
+#define	CCSR_RXFLOWOFF	0x20
+#define	CCSR_TXENABLED	0x08
+#define	CCSR_TXFLOWON	0x04
+#define	CCSR_TXFLOWOFF	0x02
+
+/*****************************************************************************/
+
+/*
+ *	Define the embedded commands.
+ */
+#define	ETC_CMD		0x00
+#define	ETC_STARTBREAK	0x81
+#define	ETC_DELAY	0x82
+#define	ETC_STOPBREAK	0x83
+
+/*****************************************************************************/
+#endif