diff options
author | Srikant Patnaik | 2015-01-11 12:28:04 +0530 |
---|---|---|
committer | Srikant Patnaik | 2015-01-11 12:28:04 +0530 |
commit | 871480933a1c28f8a9fed4c4d34d06c439a7a422 (patch) | |
tree | 8718f573808810c2a1e8cb8fb6ac469093ca2784 /drivers/usb/gadget/omap_udc.h | |
parent | 9d40ac5867b9aefe0722bc1f110b965ff294d30d (diff) | |
download | FOSSEE-netbook-kernel-source-871480933a1c28f8a9fed4c4d34d06c439a7a422.tar.gz FOSSEE-netbook-kernel-source-871480933a1c28f8a9fed4c4d34d06c439a7a422.tar.bz2 FOSSEE-netbook-kernel-source-871480933a1c28f8a9fed4c4d34d06c439a7a422.zip |
Moved, renamed, and deleted files
The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.
Diffstat (limited to 'drivers/usb/gadget/omap_udc.h')
-rw-r--r-- | drivers/usb/gadget/omap_udc.h | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h new file mode 100644 index 00000000..59d3b221 --- /dev/null +++ b/drivers/usb/gadget/omap_udc.h @@ -0,0 +1,207 @@ +/* + * omap_udc.h -- for omap 3.2 udc, with OTG support + * + * 2004 (C) Texas Instruments, Inc. + * 2004 (C) David Brownell + */ + +/* + * USB device/endpoint management registers + */ + +#define UDC_REV (UDC_BASE + 0x0) /* Revision */ +#define UDC_EP_NUM (UDC_BASE + 0x4) /* Which endpoint */ +# define UDC_SETUP_SEL (1 << 6) +# define UDC_EP_SEL (1 << 5) +# define UDC_EP_DIR (1 << 4) + /* low 4 bits for endpoint number */ +#define UDC_DATA (UDC_BASE + 0x08) /* Endpoint FIFO */ +#define UDC_CTRL (UDC_BASE + 0x0C) /* Endpoint control */ +# define UDC_CLR_HALT (1 << 7) +# define UDC_SET_HALT (1 << 6) +# define UDC_CLRDATA_TOGGLE (1 << 3) +# define UDC_SET_FIFO_EN (1 << 2) +# define UDC_CLR_EP (1 << 1) +# define UDC_RESET_EP (1 << 0) +#define UDC_STAT_FLG (UDC_BASE + 0x10) /* Endpoint status */ +# define UDC_NO_RXPACKET (1 << 15) +# define UDC_MISS_IN (1 << 14) +# define UDC_DATA_FLUSH (1 << 13) +# define UDC_ISO_ERR (1 << 12) +# define UDC_ISO_FIFO_EMPTY (1 << 9) +# define UDC_ISO_FIFO_FULL (1 << 8) +# define UDC_EP_HALTED (1 << 6) +# define UDC_STALL (1 << 5) +# define UDC_NAK (1 << 4) +# define UDC_ACK (1 << 3) +# define UDC_FIFO_EN (1 << 2) +# define UDC_NON_ISO_FIFO_EMPTY (1 << 1) +# define UDC_NON_ISO_FIFO_FULL (1 << 0) +#define UDC_RXFSTAT (UDC_BASE + 0x14) /* OUT bytecount */ +#define UDC_SYSCON1 (UDC_BASE + 0x18) /* System config 1 */ +# define UDC_CFG_LOCK (1 << 8) +# define UDC_DATA_ENDIAN (1 << 7) +# define UDC_DMA_ENDIAN (1 << 6) +# define UDC_NAK_EN (1 << 4) +# define UDC_AUTODECODE_DIS (1 << 3) +# define UDC_SELF_PWR (1 << 2) +# define UDC_SOFF_DIS (1 << 1) +# define UDC_PULLUP_EN (1 << 0) +#define UDC_SYSCON2 (UDC_BASE + 0x1C) /* System config 2 */ +# define UDC_RMT_WKP (1 << 6) +# define UDC_STALL_CMD (1 << 5) +# define UDC_DEV_CFG (1 << 3) +# define UDC_CLR_CFG (1 << 2) +#define UDC_DEVSTAT (UDC_BASE + 0x20) /* Device status */ +# define UDC_B_HNP_ENABLE (1 << 9) +# define UDC_A_HNP_SUPPORT (1 << 8) +# define UDC_A_ALT_HNP_SUPPORT (1 << 7) +# define UDC_R_WK_OK (1 << 6) +# define UDC_USB_RESET (1 << 5) +# define UDC_SUS (1 << 4) +# define UDC_CFG (1 << 3) +# define UDC_ADD (1 << 2) +# define UDC_DEF (1 << 1) +# define UDC_ATT (1 << 0) +#define UDC_SOF (UDC_BASE + 0x24) /* Start of frame */ +# define UDC_FT_LOCK (1 << 12) +# define UDC_TS_OK (1 << 11) +# define UDC_TS 0x03ff +#define UDC_IRQ_EN (UDC_BASE + 0x28) /* Interrupt enable */ +# define UDC_SOF_IE (1 << 7) +# define UDC_EPN_RX_IE (1 << 5) +# define UDC_EPN_TX_IE (1 << 4) +# define UDC_DS_CHG_IE (1 << 3) +# define UDC_EP0_IE (1 << 0) +#define UDC_DMA_IRQ_EN (UDC_BASE + 0x2C) /* DMA irq enable */ + /* rx/tx dma channels numbered 1-3 not 0-2 */ +# define UDC_TX_DONE_IE(n) (1 << (4 * (n) - 2)) +# define UDC_RX_CNT_IE(n) (1 << (4 * (n) - 3)) +# define UDC_RX_EOT_IE(n) (1 << (4 * (n) - 4)) +#define UDC_IRQ_SRC (UDC_BASE + 0x30) /* Interrupt source */ +# define UDC_TXN_DONE (1 << 10) +# define UDC_RXN_CNT (1 << 9) +# define UDC_RXN_EOT (1 << 8) +# define UDC_IRQ_SOF (1 << 7) +# define UDC_EPN_RX (1 << 5) +# define UDC_EPN_TX (1 << 4) +# define UDC_DS_CHG (1 << 3) +# define UDC_SETUP (1 << 2) +# define UDC_EP0_RX (1 << 1) +# define UDC_EP0_TX (1 << 0) +# define UDC_IRQ_SRC_MASK 0x7bf +#define UDC_EPN_STAT (UDC_BASE + 0x34) /* EP irq status */ +#define UDC_DMAN_STAT (UDC_BASE + 0x38) /* DMA irq status */ +# define UDC_DMA_RX_SB (1 << 12) +# define UDC_DMA_RX_SRC(x) (((x)>>8) & 0xf) +# define UDC_DMA_TX_SRC(x) (((x)>>0) & 0xf) + + +/* DMA configuration registers: up to three channels in each direction. */ +#define UDC_RXDMA_CFG (UDC_BASE + 0x40) /* 3 eps for RX DMA */ +# define UDC_DMA_REQ (1 << 12) +#define UDC_TXDMA_CFG (UDC_BASE + 0x44) /* 3 eps for TX DMA */ +#define UDC_DATA_DMA (UDC_BASE + 0x48) /* rx/tx fifo addr */ + +/* rx/tx dma control, numbering channels 1-3 not 0-2 */ +#define UDC_TXDMA(chan) (UDC_BASE + 0x50 - 4 + 4 * (chan)) +# define UDC_TXN_EOT (1 << 15) /* bytes vs packets */ +# define UDC_TXN_START (1 << 14) /* start transfer */ +# define UDC_TXN_TSC 0x03ff /* units in xfer */ +#define UDC_RXDMA(chan) (UDC_BASE + 0x60 - 4 + 4 * (chan)) +# define UDC_RXN_STOP (1 << 15) /* enable EOT irq */ +# define UDC_RXN_TC 0x00ff /* packets in xfer */ + + +/* + * Endpoint configuration registers (used before CFG_LOCK is set) + * UDC_EP_TX(0) is unused + */ +#define UDC_EP_RX(endpoint) (UDC_BASE + 0x80 + (endpoint)*4) +# define UDC_EPN_RX_VALID (1 << 15) +# define UDC_EPN_RX_DB (1 << 14) + /* buffer size in bits 13, 12 */ +# define UDC_EPN_RX_ISO (1 << 11) + /* buffer pointer in low 11 bits */ +#define UDC_EP_TX(endpoint) (UDC_BASE + 0xc0 + (endpoint)*4) + /* same bitfields as in RX */ + +/*-------------------------------------------------------------------------*/ + +struct omap_req { + struct usb_request req; + struct list_head queue; + unsigned dma_bytes; + unsigned mapped:1; +}; + +struct omap_ep { + struct usb_ep ep; + struct list_head queue; + unsigned long irqs; + struct list_head iso; + const struct usb_endpoint_descriptor *desc; + char name[14]; + u16 maxpacket; + u8 bEndpointAddress; + u8 bmAttributes; + unsigned double_buf:1; + unsigned stopped:1; + unsigned fnf:1; + unsigned has_dma:1; + u8 ackwait; + u8 dma_channel; + u16 dma_counter; + int lch; + struct omap_udc *udc; + struct timer_list timer; +}; + +struct omap_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + spinlock_t lock; + struct omap_ep ep[32]; + u16 devstat; + u16 clr_halt; + struct usb_phy *transceiver; + struct list_head iso; + unsigned softconnect:1; + unsigned vbus_active:1; + unsigned ep0_pending:1; + unsigned ep0_in:1; + unsigned ep0_set_config:1; + unsigned ep0_reset_config:1; + unsigned ep0_setup:1; + struct completion *done; + struct clk *dc_clk; + struct clk *hhc_clk; + unsigned clk_requested:1; +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef VERBOSE +# define VDBG DBG +#else +# define VDBG(stuff...) do{}while(0) +#endif + +#define ERR(stuff...) pr_err("udc: " stuff) +#define WARNING(stuff...) pr_warning("udc: " stuff) +#define INFO(stuff...) pr_info("udc: " stuff) +#define DBG(stuff...) pr_debug("udc: " stuff) + +/*-------------------------------------------------------------------------*/ + +/* MOD_CONF_CTRL_0 */ +#define VBUS_W2FC_1510 (1 << 17) /* 0 gpio0, 1 dvdd2 pin */ + +/* FUNC_MUX_CTRL_0 */ +#define VBUS_CTRL_1510 (1 << 19) /* 1 connected (software) */ +#define VBUS_MODE_1510 (1 << 18) /* 0 hardware, 1 software */ + +#define HMC_1510 ((omap_readl(MOD_CONF_CTRL_0) >> 1) & 0x3f) +#define HMC_1610 (omap_readl(OTG_SYSCON_2) & 0x3f) +#define HMC (cpu_is_omap15xx() ? HMC_1510 : HMC_1610) + |