Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

22 files changed, 7339 insertions, 0 deletions

diff --git a/drivers/staging/omapdrm/Kconfig b/drivers/staging/omapdrm/Kconfig
new file mode 100644
index 00000000..81a7cba4
--- /dev/null
+++ b/drivers/staging/omapdrm/Kconfig
@@ -0,0 +1,25 @@
+
+config DRM_OMAP
+	tristate "OMAP DRM"
+	depends on DRM && !CONFIG_FB_OMAP2
+	depends on ARCH_OMAP2PLUS
+	select DRM_KMS_HELPER
+	select OMAP2_DSS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	default n
+	help
+	  DRM display driver for OMAP2/3/4 based boards.
+
+config DRM_OMAP_NUM_CRTCS
+	int "Number of CRTCs"
+	range 1 10
+	default 1  if ARCH_OMAP2 || ARCH_OMAP3
+	default 2  if ARCH_OMAP4
+	depends on DRM_OMAP
+	help
+	  Select the number of video overlays which can be used as framebuffers.
+	  The remaining overlays are reserved for video.
+
diff --git a/drivers/staging/omapdrm/Makefile b/drivers/staging/omapdrm/Makefile
new file mode 100644
index 00000000..d9cdc120
--- /dev/null
+++ b/drivers/staging/omapdrm/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for the drm device driver.  This driver provides support for the
+# Direct Rendering Infrastructure (DRI)
+#
+
+ccflags-y := -Iinclude/drm -Werror
+omapdrm-y := omap_drv.o \
+	omap_debugfs.o \
+	omap_crtc.o \
+	omap_plane.o \
+	omap_encoder.o \
+	omap_connector.o \
+	omap_fb.o \
+	omap_fbdev.o \
+	omap_gem.o \
+	omap_dmm_tiler.o \
+	tcm-sita.o
+
+# temporary:
+omapdrm-y += omap_gem_helpers.o
+
+obj-$(CONFIG_DRM_OMAP)	+= omapdrm.o
diff --git a/drivers/staging/omapdrm/TODO b/drivers/staging/omapdrm/TODO
new file mode 100644
index 00000000..55b18377
--- /dev/null
+++ b/drivers/staging/omapdrm/TODO
@@ -0,0 +1,38 @@
+TODO
+. check error handling/cleanup paths
+. add drm_plane / overlay support
+. add video decode/encode support (via syslink3 + codec-engine)
+. still some rough edges with flipping.. event back to userspace should
+  really come after VSYNC interrupt
+. where should we do eviction (detatch_pages())?  We aren't necessarily
+  accessing the pages via a GART, so maybe we need some other threshold
+  to put a cap on the # of pages that can be pin'd.  (It is mostly only
+  of interest in case you have a swap partition/file.. which a lot of
+  these devices do not.. but it doesn't hurt for the driver to do the
+  right thing anyways.)
+  . Use mm_shrinker to trigger unpinning pages.  Need to figure out how
+    to handle next issue first (I think?)
+  . Note TTM already has some mm_shrinker stuff..  maybe an argument to
+    move to TTM?  Or maybe something that could be factored out in common?
+. GEM/shmem backed pages can have existing mappings (kernel linear map,
+  etc..), which isn't really ideal.
+. Revisit GEM sync object infrastructure.. TTM has some framework for this
+  already.  Possibly this could be refactored out and made more common?
+  There should be some way to do this with less wheel-reinvention.
+. Review DSS vs KMS mismatches.  The omap_dss_device is sort of part encoder,
+  part connector.  Which results in a bit of duct tape to fwd calls from
+  encoder to connector.  Possibly this could be done a bit better.
+. Solve PM sequencing on resume.  DMM/TILER must be reloaded before any
+  access is made from any component in the system.  Which means on suspend
+  CRTC's should be disabled, and on resume the LUT should be reprogrammed
+  before CRTC's are re-enabled, to prevent DSS from trying to DMA from a
+  buffer mapped in DMM/TILER before LUT is reloaded.
+. Add debugfs information for DMM/TILER
+
+Userspace:
+. git://github.com/robclark/xf86-video-omap.git
+
+Currently tested on
+. OMAP3530 beagleboard
+. OMAP4430 pandaboard
+. OMAP4460 pandaboard
diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c
new file mode 100644
index 00000000..5e2856c0
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_connector.c
@@ -0,0 +1,371 @@
+/*
+ * drivers/staging/omapdrm/omap_connector.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * connector funcs
+ */
+
+#define to_omap_connector(x) container_of(x, struct omap_connector, base)
+
+struct omap_connector {
+	struct drm_connector base;
+	struct omap_dss_device *dssdev;
+};
+
+static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode,
+		struct omap_video_timings *timings)
+{
+	mode->clock = timings->pixel_clock;
+
+	mode->hdisplay = timings->x_res;
+	mode->hsync_start = mode->hdisplay + timings->hfp;
+	mode->hsync_end = mode->hsync_start + timings->hsw;
+	mode->htotal = mode->hsync_end + timings->hbp;
+
+	mode->vdisplay = timings->y_res;
+	mode->vsync_start = mode->vdisplay + timings->vfp;
+	mode->vsync_end = mode->vsync_start + timings->vsw;
+	mode->vtotal = mode->vsync_end + timings->vbp;
+
+	/* note: whether or not it is interlaced, +/- h/vsync, etc,
+	 * which should be set in the mode flags, is not exposed in
+	 * the omap_video_timings struct.. but hdmi driver tracks
+	 * those separately so all we have to have to set the mode
+	 * is the way to recover these timings values, and the
+	 * omap_dss_driver would do the rest.
+	 */
+}
+
+static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings,
+		struct drm_display_mode *mode)
+{
+	timings->pixel_clock = mode->clock;
+
+	timings->x_res = mode->hdisplay;
+	timings->hfp = mode->hsync_start - mode->hdisplay;
+	timings->hsw = mode->hsync_end - mode->hsync_start;
+	timings->hbp = mode->htotal - mode->hsync_end;
+
+	timings->y_res = mode->vdisplay;
+	timings->vfp = mode->vsync_start - mode->vdisplay;
+	timings->vsw = mode->vsync_end - mode->vsync_start;
+	timings->vbp = mode->vtotal - mode->vsync_end;
+}
+
+static void omap_connector_dpms(struct drm_connector *connector, int mode)
+{
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev = omap_connector->dssdev;
+	int old_dpms;
+
+	DBG("%s: %d", dssdev->name, mode);
+
+	old_dpms = connector->dpms;
+
+	/* from off to on, do from crtc to connector */
+	if (mode < old_dpms)
+		drm_helper_connector_dpms(connector, mode);
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		/* store resume info for suspended displays */
+		switch (dssdev->state) {
+		case OMAP_DSS_DISPLAY_SUSPENDED:
+			dssdev->activate_after_resume = true;
+			break;
+		case OMAP_DSS_DISPLAY_DISABLED: {
+			int ret = dssdev->driver->enable(dssdev);
+			if (ret) {
+				DBG("%s: failed to enable: %d",
+						dssdev->name, ret);
+				dssdev->driver->disable(dssdev);
+			}
+			break;
+		}
+		default:
+			break;
+		}
+	} else {
+		/* TODO */
+	}
+
+	/* from on to off, do from connector to crtc */
+	if (mode > old_dpms)
+		drm_helper_connector_dpms(connector, mode);
+}
+
+enum drm_connector_status omap_connector_detect(
+		struct drm_connector *connector, bool force)
+{
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev = omap_connector->dssdev;
+	struct omap_dss_driver *dssdrv = dssdev->driver;
+	enum drm_connector_status ret;
+
+	if (dssdrv->detect) {
+		if (dssdrv->detect(dssdev)) {
+			ret = connector_status_connected;
+		} else {
+			ret = connector_status_disconnected;
+		}
+	} else {
+		ret = connector_status_unknown;
+	}
+
+	VERB("%s: %d (force=%d)", omap_connector->dssdev->name, ret, force);
+
+	return ret;
+}
+
+static void omap_connector_destroy(struct drm_connector *connector)
+{
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev = omap_connector->dssdev;
+
+	dssdev->driver->disable(dssdev);
+
+	DBG("%s", omap_connector->dssdev->name);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(omap_connector);
+
+	omap_dss_put_device(dssdev);
+}
+
+#define MAX_EDID  512
+
+static int omap_connector_get_modes(struct drm_connector *connector)
+{
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev = omap_connector->dssdev;
+	struct omap_dss_driver *dssdrv = dssdev->driver;
+	struct drm_device *dev = connector->dev;
+	int n = 0;
+
+	DBG("%s", omap_connector->dssdev->name);
+
+	/* if display exposes EDID, then we parse that in the normal way to
+	 * build table of supported modes.. otherwise (ie. fixed resolution
+	 * LCD panels) we just return a single mode corresponding to the
+	 * currently configured timings:
+	 */
+	if (dssdrv->read_edid) {
+		void *edid = kzalloc(MAX_EDID, GFP_KERNEL);
+
+		if ((dssdrv->read_edid(dssdev, edid, MAX_EDID) > 0) &&
+				drm_edid_is_valid(edid)) {
+			drm_mode_connector_update_edid_property(
+					connector, edid);
+			n = drm_add_edid_modes(connector, edid);
+			kfree(connector->display_info.raw_edid);
+			connector->display_info.raw_edid = edid;
+		} else {
+			drm_mode_connector_update_edid_property(
+					connector, NULL);
+			connector->display_info.raw_edid = NULL;
+			kfree(edid);
+		}
+	} else {
+		struct drm_display_mode *mode = drm_mode_create(dev);
+		struct omap_video_timings timings;
+
+		dssdrv->get_timings(dssdev, &timings);
+
+		copy_timings_omap_to_drm(mode, &timings);
+
+		mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+		drm_mode_set_name(mode);
+		drm_mode_probed_add(connector, mode);
+
+		n = 1;
+	}
+
+	return n;
+}
+
+static int omap_connector_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev = omap_connector->dssdev;
+	struct omap_dss_driver *dssdrv = dssdev->driver;
+	struct omap_video_timings timings = {0};
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *new_mode;
+	int ret = MODE_BAD;
+
+	copy_timings_drm_to_omap(&timings, mode);
+	mode->vrefresh = drm_mode_vrefresh(mode);
+
+	if (!dssdrv->check_timings(dssdev, &timings)) {
+		/* check if vrefresh is still valid */
+		new_mode = drm_mode_duplicate(dev, mode);
+		new_mode->clock = timings.pixel_clock;
+		new_mode->vrefresh = 0;
+		if (mode->vrefresh == drm_mode_vrefresh(new_mode))
+			ret = MODE_OK;
+		drm_mode_destroy(dev, new_mode);
+	}
+
+	DBG("connector: mode %s: "
+			"%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+			(ret == MODE_OK) ? "valid" : "invalid",
+			mode->base.id, mode->name, mode->vrefresh, mode->clock,
+			mode->hdisplay, mode->hsync_start,
+			mode->hsync_end, mode->htotal,
+			mode->vdisplay, mode->vsync_start,
+			mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+
+	return ret;
+}
+
+struct drm_encoder *omap_connector_attached_encoder(
+		struct drm_connector *connector)
+{
+	int i;
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		struct drm_mode_object *obj;
+
+		if (connector->encoder_ids[i] == 0)
+			break;
+
+		obj = drm_mode_object_find(connector->dev,
+				connector->encoder_ids[i],
+				DRM_MODE_OBJECT_ENCODER);
+
+		if (obj) {
+			struct drm_encoder *encoder = obj_to_encoder(obj);
+			struct omap_overlay_manager *mgr =
+					omap_encoder_get_manager(encoder);
+			DBG("%s: found %s", omap_connector->dssdev->name,
+					mgr->name);
+			return encoder;
+		}
+	}
+
+	DBG("%s: no encoder", omap_connector->dssdev->name);
+
+	return NULL;
+}
+
+static const struct drm_connector_funcs omap_connector_funcs = {
+	.dpms = omap_connector_dpms,
+	.detect = omap_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = omap_connector_destroy,
+};
+
+static const struct drm_connector_helper_funcs omap_connector_helper_funcs = {
+	.get_modes = omap_connector_get_modes,
+	.mode_valid = omap_connector_mode_valid,
+	.best_encoder = omap_connector_attached_encoder,
+};
+
+/* called from encoder when mode is set, to propagate settings to the dssdev */
+void omap_connector_mode_set(struct drm_connector *connector,
+		struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+	struct omap_dss_device *dssdev = omap_connector->dssdev;
+	struct omap_dss_driver *dssdrv = dssdev->driver;
+	struct omap_video_timings timings;
+
+	copy_timings_drm_to_omap(&timings, mode);
+
+	DBG("%s: set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+			omap_connector->dssdev->name,
+			mode->base.id, mode->name, mode->vrefresh, mode->clock,
+			mode->hdisplay, mode->hsync_start,
+			mode->hsync_end, mode->htotal,
+			mode->vdisplay, mode->vsync_start,
+			mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+
+	if (dssdrv->check_timings(dssdev, &timings)) {
+		dev_err(dev->dev, "could not set timings\n");
+		return;
+	}
+
+	dssdrv->set_timings(dssdev, &timings);
+}
+
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+void omap_connector_flush(struct drm_connector *connector,
+		int x, int y, int w, int h)
+{
+	struct omap_connector *omap_connector = to_omap_connector(connector);
+
+	/* TODO: enable when supported in dss */
+	VERB("%s: %d,%d, %dx%d", omap_connector->dssdev->name, x, y, w, h);
+}
+
+/* initialize connector */
+struct drm_connector *omap_connector_init(struct drm_device *dev,
+		int connector_type, struct omap_dss_device *dssdev)
+{
+	struct drm_connector *connector = NULL;
+	struct omap_connector *omap_connector;
+
+	DBG("%s", dssdev->name);
+
+	omap_dss_get_device(dssdev);
+
+	omap_connector = kzalloc(sizeof(struct omap_connector), GFP_KERNEL);
+	if (!omap_connector) {
+		dev_err(dev->dev, "could not allocate connector\n");
+		goto fail;
+	}
+
+	omap_connector->dssdev = dssdev;
+	connector = &omap_connector->base;
+
+	drm_connector_init(dev, connector, &omap_connector_funcs,
+				connector_type);
+	drm_connector_helper_add(connector, &omap_connector_helper_funcs);
+
+#if 0 /* enable when dss2 supports hotplug */
+	if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_HPD)
+		connector->polled = 0;
+	else
+#endif
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+				DRM_CONNECTOR_POLL_DISCONNECT;
+
+	connector->interlace_allowed = 1;
+	connector->doublescan_allowed = 0;
+
+	drm_sysfs_connector_add(connector);
+
+	return connector;
+
+fail:
+	if (connector) {
+		omap_connector_destroy(connector);
+	}
+
+	return NULL;
+}
diff --git a/drivers/staging/omapdrm/omap_crtc.c b/drivers/staging/omapdrm/omap_crtc.c
new file mode 100644
index 00000000..490a7f15
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_crtc.c
@@ -0,0 +1,248 @@
+/*
+ * drivers/staging/omapdrm/omap_crtc.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_mode.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+#define to_omap_crtc(x) container_of(x, struct omap_crtc, base)
+
+struct omap_crtc {
+	struct drm_crtc base;
+	struct drm_plane *plane;
+	const char *name;
+	int id;
+
+	/* if there is a pending flip, these will be non-null: */
+	struct drm_pending_vblank_event *event;
+	struct drm_framebuffer *old_fb;
+};
+
+static void omap_crtc_gamma_set(struct drm_crtc *crtc,
+		u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size)
+{
+	/* not supported.. at least not yet */
+}
+
+static void omap_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	omap_crtc->plane->funcs->destroy(omap_crtc->plane);
+	drm_crtc_cleanup(crtc);
+	kfree(omap_crtc);
+}
+
+static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct omap_drm_private *priv = crtc->dev->dev_private;
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	int i;
+
+	WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
+
+	for (i = 0; i < priv->num_planes; i++) {
+		struct drm_plane *plane = priv->planes[i];
+		if (plane->crtc == crtc)
+			WARN_ON(omap_plane_dpms(plane, mode));
+	}
+}
+
+static bool omap_crtc_mode_fixup(struct drm_crtc *crtc,
+		struct drm_display_mode *mode,
+		struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static int omap_crtc_mode_set(struct drm_crtc *crtc,
+		struct drm_display_mode *mode,
+		struct drm_display_mode *adjusted_mode,
+		int x, int y,
+		struct drm_framebuffer *old_fb)
+{
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	struct drm_plane *plane = omap_crtc->plane;
+
+	return omap_plane_mode_set(plane, crtc, crtc->fb,
+			0, 0, mode->hdisplay, mode->vdisplay,
+			x << 16, y << 16,
+			mode->hdisplay << 16, mode->vdisplay << 16);
+}
+
+static void omap_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	DBG("%s", omap_crtc->name);
+	omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_crtc_commit(struct drm_crtc *crtc)
+{
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	DBG("%s", omap_crtc->name);
+	omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+		struct drm_framebuffer *old_fb)
+{
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	struct drm_plane *plane = omap_crtc->plane;
+	struct drm_display_mode *mode = &crtc->mode;
+
+	return plane->funcs->update_plane(plane, crtc, crtc->fb,
+			0, 0, mode->hdisplay, mode->vdisplay,
+			x << 16, y << 16,
+			mode->hdisplay << 16, mode->vdisplay << 16);
+}
+
+static void omap_crtc_load_lut(struct drm_crtc *crtc)
+{
+}
+
+static void vblank_cb(void *arg)
+{
+	static uint32_t sequence = 0;
+	struct drm_crtc *crtc = arg;
+	struct drm_device *dev = crtc->dev;
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	struct drm_pending_vblank_event *event = omap_crtc->event;
+	unsigned long flags;
+	struct timeval now;
+
+	WARN_ON(!event);
+
+	omap_crtc->event = NULL;
+
+	/* wakeup userspace */
+	if (event) {
+		do_gettimeofday(&now);
+
+		spin_lock_irqsave(&dev->event_lock, flags);
+		/* TODO: we can't yet use the vblank time accounting,
+		 * because omapdss lower layer is the one that knows
+		 * the irq # and registers the handler, which more or
+		 * less defeats how drm_irq works.. for now just fake
+		 * the sequence number and use gettimeofday..
+		 *
+		event->event.sequence = drm_vblank_count_and_time(
+				dev, omap_crtc->id, &now);
+		 */
+		event->event.sequence = sequence++;
+		event->event.tv_sec = now.tv_sec;
+		event->event.tv_usec = now.tv_usec;
+		list_add_tail(&event->base.link,
+				&event->base.file_priv->event_list);
+		wake_up_interruptible(&event->base.file_priv->event_wait);
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+	}
+}
+
+static void page_flip_cb(void *arg)
+{
+	struct drm_crtc *crtc = arg;
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+	struct drm_framebuffer *old_fb = omap_crtc->old_fb;
+
+	omap_crtc->old_fb = NULL;
+
+	omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
+
+	/* really we'd like to setup the callback atomically w/ setting the
+	 * new scanout buffer to avoid getting stuck waiting an extra vblank
+	 * cycle.. for now go for correctness and later figure out speed..
+	 */
+	omap_plane_on_endwin(omap_crtc->plane, vblank_cb, crtc);
+}
+
+static int omap_crtc_page_flip_locked(struct drm_crtc *crtc,
+		 struct drm_framebuffer *fb,
+		 struct drm_pending_vblank_event *event)
+{
+	struct drm_device *dev = crtc->dev;
+	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+
+	DBG("%d -> %d", crtc->fb ? crtc->fb->base.id : -1, fb->base.id);
+
+	if (omap_crtc->event) {
+		dev_err(dev->dev, "already a pending flip\n");
+		return -EINVAL;
+	}
+
+	omap_crtc->old_fb = crtc->fb;
+	omap_crtc->event = event;
+	crtc->fb = fb;
+
+	omap_gem_op_async(omap_framebuffer_bo(fb, 0), OMAP_GEM_READ,
+			page_flip_cb, crtc);
+
+	return 0;
+}
+
+static const struct drm_crtc_funcs omap_crtc_funcs = {
+	.gamma_set = omap_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = omap_crtc_destroy,
+	.page_flip = omap_crtc_page_flip_locked,
+};
+
+static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = {
+	.dpms = omap_crtc_dpms,
+	.mode_fixup = omap_crtc_mode_fixup,
+	.mode_set = omap_crtc_mode_set,
+	.prepare = omap_crtc_prepare,
+	.commit = omap_crtc_commit,
+	.mode_set_base = omap_crtc_mode_set_base,
+	.load_lut = omap_crtc_load_lut,
+};
+
+/* initialize crtc */
+struct drm_crtc *omap_crtc_init(struct drm_device *dev,
+		struct omap_overlay *ovl, int id)
+{
+	struct drm_crtc *crtc = NULL;
+	struct omap_crtc *omap_crtc = kzalloc(sizeof(*omap_crtc), GFP_KERNEL);
+
+	DBG("%s", ovl->name);
+
+	if (!omap_crtc) {
+		dev_err(dev->dev, "could not allocate CRTC\n");
+		goto fail;
+	}
+
+	crtc = &omap_crtc->base;
+
+	omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true);
+	omap_crtc->plane->crtc = crtc;
+	omap_crtc->name = ovl->name;
+	omap_crtc->id = id;
+
+	drm_crtc_init(dev, crtc, &omap_crtc_funcs);
+	drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
+
+	return crtc;
+
+fail:
+	if (crtc) {
+		omap_crtc_destroy(crtc);
+	}
+	return NULL;
+}
diff --git a/drivers/staging/omapdrm/omap_debugfs.c b/drivers/staging/omapdrm/omap_debugfs.c
new file mode 100644
index 00000000..2f122e00
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_debugfs.c
@@ -0,0 +1,137 @@
+/*
+ * drivers/staging/omapdrm/omap_debugfs.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+#include "omap_dmm_tiler.h"
+
+#include "drm_fb_helper.h"
+
+
+#ifdef CONFIG_DEBUG_FS
+
+static int gem_show(struct seq_file *m, void *arg)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct omap_drm_private *priv = dev->dev_private;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	seq_printf(m, "All Objects:\n");
+	omap_gem_describe_objects(&priv->obj_list, m);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+}
+
+static int mm_show(struct seq_file *m, void *arg)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	return drm_mm_dump_table(m, dev->mm_private);
+}
+
+static int fb_show(struct seq_file *m, void *arg)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_framebuffer *fb;
+	int ret;
+
+	ret = mutex_lock_interruptible(&dev->mode_config.mutex);
+	if (ret)
+		return ret;
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret) {
+		mutex_unlock(&dev->mode_config.mutex);
+		return ret;
+	}
+
+	seq_printf(m, "fbcon ");
+	omap_framebuffer_describe(priv->fbdev->fb, m);
+
+	list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+		if (fb == priv->fbdev->fb)
+			continue;
+
+		seq_printf(m, "user ");
+		omap_framebuffer_describe(fb, m);
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	return 0;
+}
+
+/* list of debufs files that are applicable to all devices */
+static struct drm_info_list omap_debugfs_list[] = {
+	{"gem", gem_show, 0},
+	{"mm", mm_show, 0},
+	{"fb", fb_show, 0},
+};
+
+/* list of debugfs files that are specific to devices with dmm/tiler */
+static struct drm_info_list omap_dmm_debugfs_list[] = {
+	{"tiler_map", tiler_map_show, 0},
+};
+
+int omap_debugfs_init(struct drm_minor *minor)
+{
+	struct drm_device *dev = minor->dev;
+	int ret;
+
+	ret = drm_debugfs_create_files(omap_debugfs_list,
+			ARRAY_SIZE(omap_debugfs_list),
+			minor->debugfs_root, minor);
+
+	if (ret) {
+		dev_err(dev->dev, "could not install omap_debugfs_list\n");
+		return ret;
+	}
+
+	if (dmm_is_available())
+		ret = drm_debugfs_create_files(omap_dmm_debugfs_list,
+				ARRAY_SIZE(omap_dmm_debugfs_list),
+				minor->debugfs_root, minor);
+
+	if (ret) {
+		dev_err(dev->dev, "could not install omap_dmm_debugfs_list\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+void omap_debugfs_cleanup(struct drm_minor *minor)
+{
+	drm_debugfs_remove_files(omap_debugfs_list,
+			ARRAY_SIZE(omap_debugfs_list), minor);
+	if (dmm_is_available())
+		drm_debugfs_remove_files(omap_dmm_debugfs_list,
+				ARRAY_SIZE(omap_dmm_debugfs_list), minor);
+}
+
+#endif
diff --git a/drivers/staging/omapdrm/omap_dmm_priv.h b/drivers/staging/omapdrm/omap_dmm_priv.h
new file mode 100644
index 00000000..2f529ab4
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_dmm_priv.h
@@ -0,0 +1,187 @@
+/*
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Rob Clark <rob@ti.com>
+ *         Andy Gross <andy.gross@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef OMAP_DMM_PRIV_H
+#define OMAP_DMM_PRIV_H
+
+#define DMM_REVISION          0x000
+#define DMM_HWINFO            0x004
+#define DMM_LISA_HWINFO       0x008
+#define DMM_DMM_SYSCONFIG     0x010
+#define DMM_LISA_LOCK         0x01C
+#define DMM_LISA_MAP__0       0x040
+#define DMM_LISA_MAP__1       0x044
+#define DMM_TILER_HWINFO      0x208
+#define DMM_TILER_OR__0       0x220
+#define DMM_TILER_OR__1       0x224
+#define DMM_PAT_HWINFO        0x408
+#define DMM_PAT_GEOMETRY      0x40C
+#define DMM_PAT_CONFIG        0x410
+#define DMM_PAT_VIEW__0       0x420
+#define DMM_PAT_VIEW__1       0x424
+#define DMM_PAT_VIEW_MAP__0   0x440
+#define DMM_PAT_VIEW_MAP_BASE 0x460
+#define DMM_PAT_IRQ_EOI       0x478
+#define DMM_PAT_IRQSTATUS_RAW 0x480
+#define DMM_PAT_IRQSTATUS     0x490
+#define DMM_PAT_IRQENABLE_SET 0x4A0
+#define DMM_PAT_IRQENABLE_CLR 0x4B0
+#define DMM_PAT_STATUS__0     0x4C0
+#define DMM_PAT_STATUS__1     0x4C4
+#define DMM_PAT_STATUS__2     0x4C8
+#define DMM_PAT_STATUS__3     0x4CC
+#define DMM_PAT_DESCR__0      0x500
+#define DMM_PAT_DESCR__1      0x510
+#define DMM_PAT_DESCR__2      0x520
+#define DMM_PAT_DESCR__3      0x530
+#define DMM_PEG_HWINFO        0x608
+#define DMM_PEG_PRIO          0x620
+#define DMM_PEG_PRIO_PAT      0x640
+
+#define DMM_IRQSTAT_DST			(1<<0)
+#define DMM_IRQSTAT_LST			(1<<1)
+#define DMM_IRQSTAT_ERR_INV_DSC		(1<<2)
+#define DMM_IRQSTAT_ERR_INV_DATA	(1<<3)
+#define DMM_IRQSTAT_ERR_UPD_AREA	(1<<4)
+#define DMM_IRQSTAT_ERR_UPD_CTRL	(1<<5)
+#define DMM_IRQSTAT_ERR_UPD_DATA	(1<<6)
+#define DMM_IRQSTAT_ERR_LUT_MISS	(1<<7)
+
+#define DMM_IRQSTAT_ERR_MASK	(DMM_IRQ_STAT_ERR_INV_DSC | \
+				DMM_IRQ_STAT_ERR_INV_DATA | \
+				DMM_IRQ_STAT_ERR_UPD_AREA | \
+				DMM_IRQ_STAT_ERR_UPD_CTRL | \
+				DMM_IRQ_STAT_ERR_UPD_DATA | \
+				DMM_IRQ_STAT_ERR_LUT_MISS)
+
+#define DMM_PATSTATUS_READY		(1<<0)
+#define DMM_PATSTATUS_VALID		(1<<1)
+#define DMM_PATSTATUS_RUN		(1<<2)
+#define DMM_PATSTATUS_DONE		(1<<3)
+#define DMM_PATSTATUS_LINKED		(1<<4)
+#define DMM_PATSTATUS_BYPASSED		(1<<7)
+#define DMM_PATSTATUS_ERR_INV_DESCR	(1<<10)
+#define DMM_PATSTATUS_ERR_INV_DATA	(1<<11)
+#define DMM_PATSTATUS_ERR_UPD_AREA	(1<<12)
+#define DMM_PATSTATUS_ERR_UPD_CTRL	(1<<13)
+#define DMM_PATSTATUS_ERR_UPD_DATA	(1<<14)
+#define DMM_PATSTATUS_ERR_ACCESS	(1<<15)
+
+/* note: don't treat DMM_PATSTATUS_ERR_ACCESS as an error */
+#define DMM_PATSTATUS_ERR	(DMM_PATSTATUS_ERR_INV_DESCR | \
+				DMM_PATSTATUS_ERR_INV_DATA | \
+				DMM_PATSTATUS_ERR_UPD_AREA | \
+				DMM_PATSTATUS_ERR_UPD_CTRL | \
+				DMM_PATSTATUS_ERR_UPD_DATA)
+
+
+
+enum {
+	PAT_STATUS,
+	PAT_DESCR
+};
+
+struct pat_ctrl {
+	u32 start:4;
+	u32 dir:4;
+	u32 lut_id:8;
+	u32 sync:12;
+	u32 ini:4;
+};
+
+struct pat {
+	uint32_t next_pa;
+	struct pat_area area;
+	struct pat_ctrl ctrl;
+	uint32_t data_pa;
+};
+
+#define DMM_FIXED_RETRY_COUNT 1000
+
+/* create refill buffer big enough to refill all slots, plus 3 descriptors..
+ * 3 descriptors is probably the worst-case for # of 2d-slices in a 1d area,
+ * but I guess you don't hit that worst case at the same time as full area
+ * refill
+ */
+#define DESCR_SIZE 128
+#define REFILL_BUFFER_SIZE ((4 * 128 * 256) + (3 * DESCR_SIZE))
+
+struct dmm;
+
+struct dmm_txn {
+	void *engine_handle;
+	struct tcm *tcm;
+
+	uint8_t *current_va;
+	dma_addr_t current_pa;
+
+	struct pat *last_pat;
+};
+
+struct refill_engine {
+	int id;
+	struct dmm *dmm;
+	struct tcm *tcm;
+
+	uint8_t *refill_va;
+	dma_addr_t refill_pa;
+
+	/* only one trans per engine for now */
+	struct dmm_txn txn;
+
+	/* offset to lut associated with container */
+	u32 *lut_offset;
+
+	wait_queue_head_t wait_for_refill;
+
+	struct list_head idle_node;
+};
+
+struct dmm {
+	struct device *dev;
+	void __iomem *base;
+	int irq;
+
+	struct page *dummy_page;
+	dma_addr_t dummy_pa;
+
+	void *refill_va;
+	dma_addr_t refill_pa;
+
+	/* refill engines */
+	struct semaphore engine_sem;
+	struct list_head idle_head;
+	struct refill_engine *engines;
+	int num_engines;
+
+	/* container information */
+	int container_width;
+	int container_height;
+	int lut_width;
+	int lut_height;
+	int num_lut;
+
+	/* array of LUT - TCM containers */
+	struct tcm **tcm;
+
+	/* LUT table storage */
+	u32 *lut;
+
+	/* allocation list and lock */
+	struct list_head alloc_head;
+	spinlock_t list_lock;
+};
+
+#endif
diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.c b/drivers/staging/omapdrm/omap_dmm_tiler.c
new file mode 100644
index 00000000..1ecb6a73
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_dmm_tiler.c
@@ -0,0 +1,873 @@
+/*
+ * DMM IOMMU driver support functions for TI OMAP processors.
+ *
+ * Author: Rob Clark <rob@ti.com>
+ *         Andy Gross <andy.gross@ti.com>
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h> /* platform_device() */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/list.h>
+#include <linux/semaphore.h>
+
+#include "omap_dmm_tiler.h"
+#include "omap_dmm_priv.h"
+
+#define DMM_DRIVER_NAME "dmm"
+
+/* mappings for associating views to luts */
+static struct tcm *containers[TILFMT_NFORMATS];
+static struct dmm *omap_dmm;
+
+/* Geometry table */
+#define GEOM(xshift, yshift, bytes_per_pixel) { \
+		.x_shft = (xshift), \
+		.y_shft = (yshift), \
+		.cpp    = (bytes_per_pixel), \
+		.slot_w = 1 << (SLOT_WIDTH_BITS - (xshift)), \
+		.slot_h = 1 << (SLOT_HEIGHT_BITS - (yshift)), \
+	}
+
+static const struct {
+	uint32_t x_shft;	/* unused X-bits (as part of bpp) */
+	uint32_t y_shft;	/* unused Y-bits (as part of bpp) */
+	uint32_t cpp;		/* bytes/chars per pixel */
+	uint32_t slot_w;	/* width of each slot (in pixels) */
+	uint32_t slot_h;	/* height of each slot (in pixels) */
+} geom[TILFMT_NFORMATS] = {
+		[TILFMT_8BIT]  = GEOM(0, 0, 1),
+		[TILFMT_16BIT] = GEOM(0, 1, 2),
+		[TILFMT_32BIT] = GEOM(1, 1, 4),
+		[TILFMT_PAGE]  = GEOM(SLOT_WIDTH_BITS, SLOT_HEIGHT_BITS, 1),
+};
+
+
+/* lookup table for registers w/ per-engine instances */
+static const uint32_t reg[][4] = {
+		[PAT_STATUS] = {DMM_PAT_STATUS__0, DMM_PAT_STATUS__1,
+				DMM_PAT_STATUS__2, DMM_PAT_STATUS__3},
+		[PAT_DESCR]  = {DMM_PAT_DESCR__0, DMM_PAT_DESCR__1,
+				DMM_PAT_DESCR__2, DMM_PAT_DESCR__3},
+};
+
+/* simple allocator to grab next 16 byte aligned memory from txn */
+static void *alloc_dma(struct dmm_txn *txn, size_t sz, dma_addr_t *pa)
+{
+	void *ptr;
+	struct refill_engine *engine = txn->engine_handle;
+
+	/* dmm programming requires 16 byte aligned addresses */
+	txn->current_pa = round_up(txn->current_pa, 16);
+	txn->current_va = (void *)round_up((long)txn->current_va, 16);
+
+	ptr = txn->current_va;
+	*pa = txn->current_pa;
+
+	txn->current_pa += sz;
+	txn->current_va += sz;
+
+	BUG_ON((txn->current_va - engine->refill_va) > REFILL_BUFFER_SIZE);
+
+	return ptr;
+}
+
+/* check status and spin until wait_mask comes true */
+static int wait_status(struct refill_engine *engine, uint32_t wait_mask)
+{
+	struct dmm *dmm = engine->dmm;
+	uint32_t r = 0, err, i;
+
+	i = DMM_FIXED_RETRY_COUNT;
+	while (true) {
+		r = readl(dmm->base + reg[PAT_STATUS][engine->id]);
+		err = r & DMM_PATSTATUS_ERR;
+		if (err)
+			return -EFAULT;
+
+		if ((r & wait_mask) == wait_mask)
+			break;
+
+		if (--i == 0)
+			return -ETIMEDOUT;
+
+		udelay(1);
+	}
+
+	return 0;
+}
+
+irqreturn_t omap_dmm_irq_handler(int irq, void *arg)
+{
+	struct dmm *dmm = arg;
+	uint32_t status = readl(dmm->base + DMM_PAT_IRQSTATUS);
+	int i;
+
+	/* ack IRQ */
+	writel(status, dmm->base + DMM_PAT_IRQSTATUS);
+
+	for (i = 0; i < dmm->num_engines; i++) {
+		if (status & DMM_IRQSTAT_LST)
+			wake_up_interruptible(&dmm->engines[i].wait_for_refill);
+
+		status >>= 8;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * Get a handle for a DMM transaction
+ */
+static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
+{
+	struct dmm_txn *txn = NULL;
+	struct refill_engine *engine = NULL;
+
+	down(&dmm->engine_sem);
+
+	/* grab an idle engine */
+	spin_lock(&dmm->list_lock);
+	if (!list_empty(&dmm->idle_head)) {
+		engine = list_entry(dmm->idle_head.next, struct refill_engine,
+					idle_node);
+		list_del(&engine->idle_node);
+	}
+	spin_unlock(&dmm->list_lock);
+
+	BUG_ON(!engine);
+
+	txn = &engine->txn;
+	engine->tcm = tcm;
+	txn->engine_handle = engine;
+	txn->last_pat = NULL;
+	txn->current_va = engine->refill_va;
+	txn->current_pa = engine->refill_pa;
+
+	return txn;
+}
+
+/**
+ * Add region to DMM transaction.  If pages or pages[i] is NULL, then the
+ * corresponding slot is cleared (ie. dummy_pa is programmed)
+ */
+static int dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
+		struct page **pages, uint32_t npages, uint32_t roll)
+{
+	dma_addr_t pat_pa = 0;
+	uint32_t *data;
+	struct pat *pat;
+	struct refill_engine *engine = txn->engine_handle;
+	int columns = (1 + area->x1 - area->x0);
+	int rows = (1 + area->y1 - area->y0);
+	int i = columns*rows;
+	u32 *lut = omap_dmm->lut + (engine->tcm->lut_id * omap_dmm->lut_width *
+			omap_dmm->lut_height) +
+			(area->y0 * omap_dmm->lut_width) + area->x0;
+
+	pat = alloc_dma(txn, sizeof(struct pat), &pat_pa);
+
+	if (txn->last_pat)
+		txn->last_pat->next_pa = (uint32_t)pat_pa;
+
+	pat->area = *area;
+	pat->ctrl = (struct pat_ctrl){
+			.start = 1,
+			.lut_id = engine->tcm->lut_id,
+		};
+
+	data = alloc_dma(txn, 4*i, &pat->data_pa);
+
+	while (i--) {
+		int n = i + roll;
+		if (n >= npages)
+			n -= npages;
+		data[i] = (pages && pages[n]) ?
+			page_to_phys(pages[n]) : engine->dmm->dummy_pa;
+	}
+
+	/* fill in lut with new addresses */
+	for (i = 0; i < rows; i++, lut += omap_dmm->lut_width)
+		memcpy(lut, &data[i*columns], columns * sizeof(u32));
+
+	txn->last_pat = pat;
+
+	return 0;
+}
+
+/**
+ * Commit the DMM transaction.
+ */
+static int dmm_txn_commit(struct dmm_txn *txn, bool wait)
+{
+	int ret = 0;
+	struct refill_engine *engine = txn->engine_handle;
+	struct dmm *dmm = engine->dmm;
+
+	if (!txn->last_pat) {
+		dev_err(engine->dmm->dev, "need at least one txn\n");
+		ret = -EINVAL;
+		goto cleanup;
+	}
+
+	txn->last_pat->next_pa = 0;
+
+	/* write to PAT_DESCR to clear out any pending transaction */
+	writel(0x0, dmm->base + reg[PAT_DESCR][engine->id]);
+
+	/* wait for engine ready: */
+	ret = wait_status(engine, DMM_PATSTATUS_READY);
+	if (ret) {
+		ret = -EFAULT;
+		goto cleanup;
+	}
+
+	/* kick reload */
+	writel(engine->refill_pa,
+		dmm->base + reg[PAT_DESCR][engine->id]);
+
+	if (wait) {
+		if (wait_event_interruptible_timeout(engine->wait_for_refill,
+				wait_status(engine, DMM_PATSTATUS_READY) == 0,
+				msecs_to_jiffies(1)) <= 0) {
+			dev_err(dmm->dev, "timed out waiting for done\n");
+			ret = -ETIMEDOUT;
+		}
+	}
+
+cleanup:
+	spin_lock(&dmm->list_lock);
+	list_add(&engine->idle_node, &dmm->idle_head);
+	spin_unlock(&dmm->list_lock);
+
+	up(&omap_dmm->engine_sem);
+	return ret;
+}
+
+/*
+ * DMM programming
+ */
+static int fill(struct tcm_area *area, struct page **pages,
+		uint32_t npages, uint32_t roll, bool wait)
+{
+	int ret = 0;
+	struct tcm_area slice, area_s;
+	struct dmm_txn *txn;
+
+	txn = dmm_txn_init(omap_dmm, area->tcm);
+	if (IS_ERR_OR_NULL(txn))
+		return PTR_ERR(txn);
+
+	tcm_for_each_slice(slice, *area, area_s) {
+		struct pat_area p_area = {
+				.x0 = slice.p0.x,  .y0 = slice.p0.y,
+				.x1 = slice.p1.x,  .y1 = slice.p1.y,
+		};
+
+		ret = dmm_txn_append(txn, &p_area, pages, npages, roll);
+		if (ret)
+			goto fail;
+
+		roll += tcm_sizeof(slice);
+	}
+
+	ret = dmm_txn_commit(txn, wait);
+
+fail:
+	return ret;
+}
+
+/*
+ * Pin/unpin
+ */
+
+/* note: slots for which pages[i] == NULL are filled w/ dummy page
+ */
+int tiler_pin(struct tiler_block *block, struct page **pages,
+		uint32_t npages, uint32_t roll, bool wait)
+{
+	int ret;
+
+	ret = fill(&block->area, pages, npages, roll, wait);
+
+	if (ret)
+		tiler_unpin(block);
+
+	return ret;
+}
+
+int tiler_unpin(struct tiler_block *block)
+{
+	return fill(&block->area, NULL, 0, 0, false);
+}
+
+/*
+ * Reserve/release
+ */
+struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w,
+		uint16_t h, uint16_t align)
+{
+	struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
+	u32 min_align = 128;
+	int ret;
+
+	BUG_ON(!validfmt(fmt));
+
+	/* convert width/height to slots */
+	w = DIV_ROUND_UP(w, geom[fmt].slot_w);
+	h = DIV_ROUND_UP(h, geom[fmt].slot_h);
+
+	/* convert alignment to slots */
+	min_align = max(min_align, (geom[fmt].slot_w * geom[fmt].cpp));
+	align = ALIGN(align, min_align);
+	align /= geom[fmt].slot_w * geom[fmt].cpp;
+
+	block->fmt = fmt;
+
+	ret = tcm_reserve_2d(containers[fmt], w, h, align, &block->area);
+	if (ret) {
+		kfree(block);
+		return 0;
+	}
+
+	/* add to allocation list */
+	spin_lock(&omap_dmm->list_lock);
+	list_add(&block->alloc_node, &omap_dmm->alloc_head);
+	spin_unlock(&omap_dmm->list_lock);
+
+	return block;
+}
+
+struct tiler_block *tiler_reserve_1d(size_t size)
+{
+	struct tiler_block *block = kzalloc(sizeof(*block), GFP_KERNEL);
+	int num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	if (!block)
+		return 0;
+
+	block->fmt = TILFMT_PAGE;
+
+	if (tcm_reserve_1d(containers[TILFMT_PAGE], num_pages,
+				&block->area)) {
+		kfree(block);
+		return 0;
+	}
+
+	spin_lock(&omap_dmm->list_lock);
+	list_add(&block->alloc_node, &omap_dmm->alloc_head);
+	spin_unlock(&omap_dmm->list_lock);
+
+	return block;
+}
+
+/* note: if you have pin'd pages, you should have already unpin'd first! */
+int tiler_release(struct tiler_block *block)
+{
+	int ret = tcm_free(&block->area);
+
+	if (block->area.tcm)
+		dev_err(omap_dmm->dev, "failed to release block\n");
+
+	spin_lock(&omap_dmm->list_lock);
+	list_del(&block->alloc_node);
+	spin_unlock(&omap_dmm->list_lock);
+
+	kfree(block);
+	return ret;
+}
+
+/*
+ * Utils
+ */
+
+/* calculate the tiler space address of a pixel in a view orientation */
+static u32 tiler_get_address(u32 orient, enum tiler_fmt fmt, u32 x, u32 y)
+{
+	u32 x_bits, y_bits, tmp, x_mask, y_mask, alignment;
+
+	x_bits = CONT_WIDTH_BITS - geom[fmt].x_shft;
+	y_bits = CONT_HEIGHT_BITS - geom[fmt].y_shft;
+	alignment = geom[fmt].x_shft + geom[fmt].y_shft;
+
+	/* validate coordinate */
+	x_mask = MASK(x_bits);
+	y_mask = MASK(y_bits);
+
+	if (x < 0 || x > x_mask || y < 0 || y > y_mask)
+		return 0;
+
+	/* account for mirroring */
+	if (orient & MASK_X_INVERT)
+		x ^= x_mask;
+	if (orient & MASK_Y_INVERT)
+		y ^= y_mask;
+
+	/* get coordinate address */
+	if (orient & MASK_XY_FLIP)
+		tmp = ((x << y_bits) + y);
+	else
+		tmp = ((y << x_bits) + x);
+
+	return TIL_ADDR((tmp << alignment), orient, fmt);
+}
+
+dma_addr_t tiler_ssptr(struct tiler_block *block)
+{
+	BUG_ON(!validfmt(block->fmt));
+
+	return TILVIEW_8BIT + tiler_get_address(0, block->fmt,
+			block->area.p0.x * geom[block->fmt].slot_w,
+			block->area.p0.y * geom[block->fmt].slot_h);
+}
+
+void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h)
+{
+	BUG_ON(!validfmt(fmt));
+	*w = round_up(*w, geom[fmt].slot_w);
+	*h = round_up(*h, geom[fmt].slot_h);
+}
+
+uint32_t tiler_stride(enum tiler_fmt fmt)
+{
+	BUG_ON(!validfmt(fmt));
+
+	return 1 << (CONT_WIDTH_BITS + geom[fmt].y_shft);
+}
+
+size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h)
+{
+	tiler_align(fmt, &w, &h);
+	return geom[fmt].cpp * w * h;
+}
+
+size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h)
+{
+	BUG_ON(!validfmt(fmt));
+	return round_up(geom[fmt].cpp * w, PAGE_SIZE) * h;
+}
+
+bool dmm_is_initialized(void)
+{
+	return omap_dmm ? true : false;
+}
+
+static int omap_dmm_remove(struct platform_device *dev)
+{
+	struct tiler_block *block, *_block;
+	int i;
+
+	if (omap_dmm) {
+		/* free all area regions */
+		spin_lock(&omap_dmm->list_lock);
+		list_for_each_entry_safe(block, _block, &omap_dmm->alloc_head,
+					alloc_node) {
+			list_del(&block->alloc_node);
+			kfree(block);
+		}
+		spin_unlock(&omap_dmm->list_lock);
+
+		for (i = 0; i < omap_dmm->num_lut; i++)
+			if (omap_dmm->tcm && omap_dmm->tcm[i])
+				omap_dmm->tcm[i]->deinit(omap_dmm->tcm[i]);
+		kfree(omap_dmm->tcm);
+
+		kfree(omap_dmm->engines);
+		if (omap_dmm->refill_va)
+			dma_free_coherent(omap_dmm->dev,
+				REFILL_BUFFER_SIZE * omap_dmm->num_engines,
+				omap_dmm->refill_va,
+				omap_dmm->refill_pa);
+		if (omap_dmm->dummy_page)
+			__free_page(omap_dmm->dummy_page);
+
+		vfree(omap_dmm->lut);
+
+		if (omap_dmm->irq != -1)
+			free_irq(omap_dmm->irq, omap_dmm);
+
+		iounmap(omap_dmm->base);
+		kfree(omap_dmm);
+		omap_dmm = NULL;
+	}
+
+	return 0;
+}
+
+static int omap_dmm_probe(struct platform_device *dev)
+{
+	int ret = -EFAULT, i;
+	struct tcm_area area = {0};
+	u32 hwinfo, pat_geom, lut_table_size;
+	struct resource *mem;
+
+	omap_dmm = kzalloc(sizeof(*omap_dmm), GFP_KERNEL);
+	if (!omap_dmm) {
+		dev_err(&dev->dev, "failed to allocate driver data section\n");
+		goto fail;
+	}
+
+	/* lookup hwmod data - base address and irq */
+	mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&dev->dev, "failed to get base address resource\n");
+		goto fail;
+	}
+
+	omap_dmm->base = ioremap(mem->start, SZ_2K);
+
+	if (!omap_dmm->base) {
+		dev_err(&dev->dev, "failed to get dmm base address\n");
+		goto fail;
+	}
+
+	omap_dmm->irq = platform_get_irq(dev, 0);
+	if (omap_dmm->irq < 0) {
+		dev_err(&dev->dev, "failed to get IRQ resource\n");
+		goto fail;
+	}
+
+	omap_dmm->dev = &dev->dev;
+
+	hwinfo = readl(omap_dmm->base + DMM_PAT_HWINFO);
+	omap_dmm->num_engines = (hwinfo >> 24) & 0x1F;
+	omap_dmm->num_lut = (hwinfo >> 16) & 0x1F;
+	omap_dmm->container_width = 256;
+	omap_dmm->container_height = 128;
+
+	/* read out actual LUT width and height */
+	pat_geom = readl(omap_dmm->base + DMM_PAT_GEOMETRY);
+	omap_dmm->lut_width = ((pat_geom >> 16) & 0xF) << 5;
+	omap_dmm->lut_height = ((pat_geom >> 24) & 0xF) << 5;
+
+	/* initialize DMM registers */
+	writel(0x88888888, omap_dmm->base + DMM_PAT_VIEW__0);
+	writel(0x88888888, omap_dmm->base + DMM_PAT_VIEW__1);
+	writel(0x80808080, omap_dmm->base + DMM_PAT_VIEW_MAP__0);
+	writel(0x80000000, omap_dmm->base + DMM_PAT_VIEW_MAP_BASE);
+	writel(0x88888888, omap_dmm->base + DMM_TILER_OR__0);
+	writel(0x88888888, omap_dmm->base + DMM_TILER_OR__1);
+
+	ret = request_irq(omap_dmm->irq, omap_dmm_irq_handler, IRQF_SHARED,
+				"omap_dmm_irq_handler", omap_dmm);
+
+	if (ret) {
+		dev_err(&dev->dev, "couldn't register IRQ %d, error %d\n",
+			omap_dmm->irq, ret);
+		omap_dmm->irq = -1;
+		goto fail;
+	}
+
+	/* Enable all interrupts for each refill engine except
+	 * ERR_LUT_MISS<n> (which is just advisory, and we don't care
+	 * about because we want to be able to refill live scanout
+	 * buffers for accelerated pan/scroll) and FILL_DSC<n> which
+	 * we just generally don't care about.
+	 */
+	writel(0x7e7e7e7e, omap_dmm->base + DMM_PAT_IRQENABLE_SET);
+
+	lut_table_size = omap_dmm->lut_width * omap_dmm->lut_height *
+			omap_dmm->num_lut;
+
+	omap_dmm->lut = vmalloc(lut_table_size * sizeof(*omap_dmm->lut));
+	if (!omap_dmm->lut) {
+		dev_err(&dev->dev, "could not allocate lut table\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	omap_dmm->dummy_page = alloc_page(GFP_KERNEL | __GFP_DMA32);
+	if (!omap_dmm->dummy_page) {
+		dev_err(&dev->dev, "could not allocate dummy page\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* set dma mask for device */
+	/* NOTE: this is a workaround for the hwmod not initializing properly */
+	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
+
+	/* alloc refill memory */
+	omap_dmm->refill_va = dma_alloc_coherent(&dev->dev,
+				REFILL_BUFFER_SIZE * omap_dmm->num_engines,
+				&omap_dmm->refill_pa, GFP_KERNEL);
+	if (!omap_dmm->refill_va) {
+		dev_err(&dev->dev, "could not allocate refill memory\n");
+		goto fail;
+	}
+
+	/* alloc engines */
+	omap_dmm->engines = kzalloc(
+			omap_dmm->num_engines * sizeof(struct refill_engine),
+			GFP_KERNEL);
+	if (!omap_dmm->engines) {
+		dev_err(&dev->dev, "could not allocate engines\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	sema_init(&omap_dmm->engine_sem, omap_dmm->num_engines);
+	INIT_LIST_HEAD(&omap_dmm->idle_head);
+	for (i = 0; i < omap_dmm->num_engines; i++) {
+		omap_dmm->engines[i].id = i;
+		omap_dmm->engines[i].dmm = omap_dmm;
+		omap_dmm->engines[i].refill_va = omap_dmm->refill_va +
+						(REFILL_BUFFER_SIZE * i);
+		omap_dmm->engines[i].refill_pa = omap_dmm->refill_pa +
+						(REFILL_BUFFER_SIZE * i);
+		init_waitqueue_head(&omap_dmm->engines[i].wait_for_refill);
+
+		list_add(&omap_dmm->engines[i].idle_node, &omap_dmm->idle_head);
+	}
+
+	omap_dmm->tcm = kzalloc(omap_dmm->num_lut * sizeof(*omap_dmm->tcm),
+				GFP_KERNEL);
+	if (!omap_dmm->tcm) {
+		dev_err(&dev->dev, "failed to allocate lut ptrs\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* init containers */
+	for (i = 0; i < omap_dmm->num_lut; i++) {
+		omap_dmm->tcm[i] = sita_init(omap_dmm->container_width,
+						omap_dmm->container_height,
+						NULL);
+
+		if (!omap_dmm->tcm[i]) {
+			dev_err(&dev->dev, "failed to allocate container\n");
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		omap_dmm->tcm[i]->lut_id = i;
+	}
+
+	/* assign access mode containers to applicable tcm container */
+	/* OMAP 4 has 1 container for all 4 views */
+	containers[TILFMT_8BIT] = omap_dmm->tcm[0];
+	containers[TILFMT_16BIT] = omap_dmm->tcm[0];
+	containers[TILFMT_32BIT] = omap_dmm->tcm[0];
+	containers[TILFMT_PAGE] = omap_dmm->tcm[0];
+
+	INIT_LIST_HEAD(&omap_dmm->alloc_head);
+	spin_lock_init(&omap_dmm->list_lock);
+
+	area = (struct tcm_area) {
+		.is2d = true,
+		.tcm = NULL,
+		.p1.x = omap_dmm->container_width - 1,
+		.p1.y = omap_dmm->container_height - 1,
+	};
+
+	for (i = 0; i < lut_table_size; i++)
+		omap_dmm->lut[i] = omap_dmm->dummy_pa;
+
+	/* initialize all LUTs to dummy page entries */
+	for (i = 0; i < omap_dmm->num_lut; i++) {
+		area.tcm = omap_dmm->tcm[i];
+		if (fill(&area, NULL, 0, 0, true))
+			dev_err(omap_dmm->dev, "refill failed");
+	}
+
+	dev_info(omap_dmm->dev, "initialized all PAT entries\n");
+
+	return 0;
+
+fail:
+	omap_dmm_remove(dev);
+	return ret;
+}
+
+/*
+ * debugfs support
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+static const char *alphabet = "abcdefghijklmnopqrstuvwxyz"
+				"ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789";
+static const char *special = ".,:;'\"`~!^-+";
+
+static void fill_map(char **map, int xdiv, int ydiv, struct tcm_area *a,
+							char c, bool ovw)
+{
+	int x, y;
+	for (y = a->p0.y / ydiv; y <= a->p1.y / ydiv; y++)
+		for (x = a->p0.x / xdiv; x <= a->p1.x / xdiv; x++)
+			if (map[y][x] == ' ' || ovw)
+				map[y][x] = c;
+}
+
+static void fill_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p,
+									char c)
+{
+	map[p->y / ydiv][p->x / xdiv] = c;
+}
+
+static char read_map_pt(char **map, int xdiv, int ydiv, struct tcm_pt *p)
+{
+	return map[p->y / ydiv][p->x / xdiv];
+}
+
+static int map_width(int xdiv, int x0, int x1)
+{
+	return (x1 / xdiv) - (x0 / xdiv) + 1;
+}
+
+static void text_map(char **map, int xdiv, char *nice, int yd, int x0, int x1)
+{
+	char *p = map[yd] + (x0 / xdiv);
+	int w = (map_width(xdiv, x0, x1) - strlen(nice)) / 2;
+	if (w >= 0) {
+		p += w;
+		while (*nice)
+			*p++ = *nice++;
+	}
+}
+
+static void map_1d_info(char **map, int xdiv, int ydiv, char *nice,
+							struct tcm_area *a)
+{
+	sprintf(nice, "%dK", tcm_sizeof(*a) * 4);
+	if (a->p0.y + 1 < a->p1.y) {
+		text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv, 0,
+							256 - 1);
+	} else if (a->p0.y < a->p1.y) {
+		if (strlen(nice) < map_width(xdiv, a->p0.x, 256 - 1))
+			text_map(map, xdiv, nice, a->p0.y / ydiv,
+					a->p0.x + xdiv,	256 - 1);
+		else if (strlen(nice) < map_width(xdiv, 0, a->p1.x))
+			text_map(map, xdiv, nice, a->p1.y / ydiv,
+					0, a->p1.y - xdiv);
+	} else if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x)) {
+		text_map(map, xdiv, nice, a->p0.y / ydiv, a->p0.x, a->p1.x);
+	}
+}
+
+static void map_2d_info(char **map, int xdiv, int ydiv, char *nice,
+							struct tcm_area *a)
+{
+	sprintf(nice, "(%d*%d)", tcm_awidth(*a), tcm_aheight(*a));
+	if (strlen(nice) + 1 < map_width(xdiv, a->p0.x, a->p1.x))
+		text_map(map, xdiv, nice, (a->p0.y + a->p1.y) / 2 / ydiv,
+							a->p0.x, a->p1.x);
+}
+
+int tiler_map_show(struct seq_file *s, void *arg)
+{
+	int xdiv = 2, ydiv = 1;
+	char **map = NULL, *global_map;
+	struct tiler_block *block;
+	struct tcm_area a, p;
+	int i;
+	const char *m2d = alphabet;
+	const char *a2d = special;
+	const char *m2dp = m2d, *a2dp = a2d;
+	char nice[128];
+	int h_adj;
+	int w_adj;
+	unsigned long flags;
+
+	if (!omap_dmm) {
+		/* early return if dmm/tiler device is not initialized */
+		return 0;
+	}
+
+	h_adj = omap_dmm->lut_height / ydiv;
+	w_adj = omap_dmm->lut_width / xdiv;
+
+	map = kzalloc(h_adj * sizeof(*map), GFP_KERNEL);
+	global_map = kzalloc((w_adj + 1) * h_adj, GFP_KERNEL);
+
+	if (!map || !global_map)
+		goto error;
+
+	memset(global_map, ' ', (w_adj + 1) * h_adj);
+	for (i = 0; i < omap_dmm->lut_height; i++) {
+		map[i] = global_map + i * (w_adj + 1);
+		map[i][w_adj] = 0;
+	}
+	spin_lock_irqsave(&omap_dmm->list_lock, flags);
+
+	list_for_each_entry(block, &omap_dmm->alloc_head, alloc_node) {
+		if (block->fmt != TILFMT_PAGE) {
+			fill_map(map, xdiv, ydiv, &block->area, *m2dp, true);
+			if (!*++a2dp)
+				a2dp = a2d;
+			if (!*++m2dp)
+				m2dp = m2d;
+			map_2d_info(map, xdiv, ydiv, nice, &block->area);
+		} else {
+			bool start = read_map_pt(map, xdiv, ydiv,
+							&block->area.p0)
+									== ' ';
+			bool end = read_map_pt(map, xdiv, ydiv, &block->area.p1)
+									== ' ';
+			tcm_for_each_slice(a, block->area, p)
+				fill_map(map, xdiv, ydiv, &a, '=', true);
+			fill_map_pt(map, xdiv, ydiv, &block->area.p0,
+							start ? '<' : 'X');
+			fill_map_pt(map, xdiv, ydiv, &block->area.p1,
+							end ? '>' : 'X');
+			map_1d_info(map, xdiv, ydiv, nice, &block->area);
+		}
+	}
+
+	spin_unlock_irqrestore(&omap_dmm->list_lock, flags);
+
+	if (s) {
+		seq_printf(s, "BEGIN DMM TILER MAP\n");
+		for (i = 0; i < 128; i++)
+			seq_printf(s, "%03d:%s\n", i, map[i]);
+		seq_printf(s, "END TILER MAP\n");
+	} else {
+		dev_dbg(omap_dmm->dev, "BEGIN DMM TILER MAP\n");
+		for (i = 0; i < 128; i++)
+			dev_dbg(omap_dmm->dev, "%03d:%s\n", i, map[i]);
+		dev_dbg(omap_dmm->dev, "END TILER MAP\n");
+	}
+
+error:
+	kfree(map);
+	kfree(global_map);
+
+	return 0;
+}
+#endif
+
+struct platform_driver omap_dmm_driver = {
+	.probe = omap_dmm_probe,
+	.remove = omap_dmm_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = DMM_DRIVER_NAME,
+	},
+};
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andy Gross <andy.gross@ti.com>");
+MODULE_DESCRIPTION("OMAP DMM/Tiler Driver");
+MODULE_ALIAS("platform:" DMM_DRIVER_NAME);
diff --git a/drivers/staging/omapdrm/omap_dmm_tiler.h b/drivers/staging/omapdrm/omap_dmm_tiler.h
new file mode 100644
index 00000000..7b1052a3
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_dmm_tiler.h
@@ -0,0 +1,134 @@
+/*
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Rob Clark <rob@ti.com>
+ *         Andy Gross <andy.gross@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef OMAP_DMM_TILER_H
+#define OMAP_DMM_TILER_H
+
+#include <plat/cpu.h>
+#include "omap_drv.h"
+#include "tcm.h"
+
+enum tiler_fmt {
+	TILFMT_8BIT = 0,
+	TILFMT_16BIT,
+	TILFMT_32BIT,
+	TILFMT_PAGE,
+	TILFMT_NFORMATS
+};
+
+struct pat_area {
+	u32 x0:8;
+	u32 y0:8;
+	u32 x1:8;
+	u32 y1:8;
+};
+
+struct tiler_block {
+	struct list_head alloc_node;	/* node for global block list */
+	struct tcm_area area;		/* area */
+	enum tiler_fmt fmt;		/* format */
+};
+
+/* bits representing the same slot in DMM-TILER hw-block */
+#define SLOT_WIDTH_BITS         6
+#define SLOT_HEIGHT_BITS        6
+
+/* bits reserved to describe coordinates in DMM-TILER hw-block */
+#define CONT_WIDTH_BITS         14
+#define CONT_HEIGHT_BITS        13
+
+/* calculated constants */
+#define TILER_PAGE              (1 << (SLOT_WIDTH_BITS + SLOT_HEIGHT_BITS))
+#define TILER_WIDTH             (1 << (CONT_WIDTH_BITS - SLOT_WIDTH_BITS))
+#define TILER_HEIGHT            (1 << (CONT_HEIGHT_BITS - SLOT_HEIGHT_BITS))
+
+/* tiler space addressing bitfields */
+#define MASK_XY_FLIP		(1 << 31)
+#define MASK_Y_INVERT		(1 << 30)
+#define MASK_X_INVERT		(1 << 29)
+#define SHIFT_ACC_MODE		27
+#define MASK_ACC_MODE		3
+
+#define MASK(bits) ((1 << (bits)) - 1)
+
+#define TILVIEW_8BIT    0x60000000u
+#define TILVIEW_16BIT   (TILVIEW_8BIT  + VIEW_SIZE)
+#define TILVIEW_32BIT   (TILVIEW_16BIT + VIEW_SIZE)
+#define TILVIEW_PAGE    (TILVIEW_32BIT + VIEW_SIZE)
+#define TILVIEW_END     (TILVIEW_PAGE  + VIEW_SIZE)
+
+/* create tsptr by adding view orientation and access mode */
+#define TIL_ADDR(x, orient, a)\
+	((u32) (x) | (orient) | ((a) << SHIFT_ACC_MODE))
+
+#ifdef CONFIG_DEBUG_FS
+int tiler_map_show(struct seq_file *s, void *arg);
+#endif
+
+/* pin/unpin */
+int tiler_pin(struct tiler_block *block, struct page **pages,
+		uint32_t npages, uint32_t roll, bool wait);
+int tiler_unpin(struct tiler_block *block);
+
+/* reserve/release */
+struct tiler_block *tiler_reserve_2d(enum tiler_fmt fmt, uint16_t w, uint16_t h,
+				uint16_t align);
+struct tiler_block *tiler_reserve_1d(size_t size);
+int tiler_release(struct tiler_block *block);
+
+/* utilities */
+dma_addr_t tiler_ssptr(struct tiler_block *block);
+uint32_t tiler_stride(enum tiler_fmt fmt);
+size_t tiler_size(enum tiler_fmt fmt, uint16_t w, uint16_t h);
+size_t tiler_vsize(enum tiler_fmt fmt, uint16_t w, uint16_t h);
+void tiler_align(enum tiler_fmt fmt, uint16_t *w, uint16_t *h);
+bool dmm_is_initialized(void);
+
+extern struct platform_driver omap_dmm_driver;
+
+/* GEM bo flags -> tiler fmt */
+static inline enum tiler_fmt gem2fmt(uint32_t flags)
+{
+	switch (flags & OMAP_BO_TILED) {
+	case OMAP_BO_TILED_8:
+		return TILFMT_8BIT;
+	case OMAP_BO_TILED_16:
+		return TILFMT_16BIT;
+	case OMAP_BO_TILED_32:
+		return TILFMT_32BIT;
+	default:
+		return TILFMT_PAGE;
+	}
+}
+
+static inline bool validfmt(enum tiler_fmt fmt)
+{
+	switch (fmt) {
+	case TILFMT_8BIT:
+	case TILFMT_16BIT:
+	case TILFMT_32BIT:
+	case TILFMT_PAGE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static inline int dmm_is_available(void)
+{
+	return cpu_is_omap44xx();
+}
+
+#endif
diff --git a/drivers/staging/omapdrm/omap_drm.h b/drivers/staging/omapdrm/omap_drm.h
new file mode 100644
index 00000000..f0ac34a8
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_drm.h
@@ -0,0 +1,123 @@
+/*
+ * include/drm/omap_drm.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_DRM_H__
+#define __OMAP_DRM_H__
+
+#include <drm/drm.h>
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints.
+ */
+
+#define OMAP_PARAM_CHIPSET_ID	1	/* ie. 0x3430, 0x4430, etc */
+
+struct drm_omap_param {
+	uint64_t param;			/* in */
+	uint64_t value;			/* in (set_param), out (get_param) */
+};
+
+#define OMAP_BO_SCANOUT		0x00000001	/* scanout capable (phys contiguous) */
+#define OMAP_BO_CACHE_MASK	0x00000006	/* cache type mask, see cache modes */
+#define OMAP_BO_TILED_MASK	0x00000f00	/* tiled mapping mask, see tiled modes */
+
+/* cache modes */
+#define OMAP_BO_CACHED		0x00000000	/* default */
+#define OMAP_BO_WC		0x00000002	/* write-combine */
+#define OMAP_BO_UNCACHED	0x00000004	/* strongly-ordered (uncached) */
+
+/* tiled modes */
+#define OMAP_BO_TILED_8		0x00000100
+#define OMAP_BO_TILED_16	0x00000200
+#define OMAP_BO_TILED_32	0x00000300
+#define OMAP_BO_TILED		(OMAP_BO_TILED_8 | OMAP_BO_TILED_16 | OMAP_BO_TILED_32)
+
+union omap_gem_size {
+	uint32_t bytes;		/* (for non-tiled formats) */
+	struct {
+		uint16_t width;
+		uint16_t height;
+	} tiled;		/* (for tiled formats) */
+};
+
+struct drm_omap_gem_new {
+	union omap_gem_size size;	/* in */
+	uint32_t flags;			/* in */
+	uint32_t handle;		/* out */
+	uint32_t __pad;
+};
+
+/* mask of operations: */
+enum omap_gem_op {
+	OMAP_GEM_READ = 0x01,
+	OMAP_GEM_WRITE = 0x02,
+};
+
+struct drm_omap_gem_cpu_prep {
+	uint32_t handle;		/* buffer handle (in) */
+	uint32_t op;			/* mask of omap_gem_op (in) */
+};
+
+struct drm_omap_gem_cpu_fini {
+	uint32_t handle;		/* buffer handle (in) */
+	uint32_t op;			/* mask of omap_gem_op (in) */
+	/* TODO maybe here we pass down info about what regions are touched
+	 * by sw so we can be clever about cache ops?  For now a placeholder,
+	 * set to zero and we just do full buffer flush..
+	 */
+	uint32_t nregions;
+	uint32_t __pad;
+};
+
+struct drm_omap_gem_info {
+	uint32_t handle;		/* buffer handle (in) */
+	uint32_t pad;
+	uint64_t offset;		/* mmap offset (out) */
+	/* note: in case of tiled buffers, the user virtual size can be
+	 * different from the physical size (ie. how many pages are needed
+	 * to back the object) which is returned in DRM_IOCTL_GEM_OPEN..
+	 * This size here is the one that should be used if you want to
+	 * mmap() the buffer:
+	 */
+	uint32_t size;			/* virtual size for mmap'ing (out) */
+	uint32_t __pad;
+};
+
+#define DRM_OMAP_GET_PARAM		0x00
+#define DRM_OMAP_SET_PARAM		0x01
+/* placeholder for plugin-api
+#define DRM_OMAP_GET_BASE		0x02
+*/
+#define DRM_OMAP_GEM_NEW		0x03
+#define DRM_OMAP_GEM_CPU_PREP		0x04
+#define DRM_OMAP_GEM_CPU_FINI		0x05
+#define DRM_OMAP_GEM_INFO		0x06
+#define DRM_OMAP_NUM_IOCTLS		0x07
+
+#define DRM_IOCTL_OMAP_GET_PARAM	DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GET_PARAM, struct drm_omap_param)
+#define DRM_IOCTL_OMAP_SET_PARAM	DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_SET_PARAM, struct drm_omap_param)
+/* placeholder for plugin-api
+#define DRM_IOCTL_OMAP_GET_BASE		DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GET_BASE, struct drm_omap_get_base)
+*/
+#define DRM_IOCTL_OMAP_GEM_NEW		DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GEM_NEW, struct drm_omap_gem_new)
+#define DRM_IOCTL_OMAP_GEM_CPU_PREP	DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_GEM_CPU_PREP, struct drm_omap_gem_cpu_prep)
+#define DRM_IOCTL_OMAP_GEM_CPU_FINI	DRM_IOW (DRM_COMMAND_BASE + DRM_OMAP_GEM_CPU_FINI, struct drm_omap_gem_cpu_fini)
+#define DRM_IOCTL_OMAP_GEM_INFO		DRM_IOWR(DRM_COMMAND_BASE + DRM_OMAP_GEM_INFO, struct drm_omap_gem_info)
+
+#endif /* __OMAP_DRM_H__ */
diff --git a/drivers/staging/omapdrm/omap_drv.c b/drivers/staging/omapdrm/omap_drv.c
new file mode 100644
index 00000000..620b8d54
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_drv.c
@@ -0,0 +1,853 @@
+/*
+ * drivers/staging/omapdrm/omap_drv.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
+#include "omap_dmm_tiler.h"
+
+#define DRIVER_NAME		MODULE_NAME
+#define DRIVER_DESC		"OMAP DRM"
+#define DRIVER_DATE		"20110917"
+#define DRIVER_MAJOR		1
+#define DRIVER_MINOR		0
+#define DRIVER_PATCHLEVEL	0
+
+struct drm_device *drm_device;
+
+static int num_crtc = CONFIG_DRM_OMAP_NUM_CRTCS;
+
+MODULE_PARM_DESC(num_crtc, "Number of overlays to use as CRTCs");
+module_param(num_crtc, int, 0600);
+
+/*
+ * mode config funcs
+ */
+
+/* Notes about mapping DSS and DRM entities:
+ *    CRTC:        overlay
+ *    encoder:     manager.. with some extension to allow one primary CRTC
+ *                 and zero or more video CRTC's to be mapped to one encoder?
+ *    connector:   dssdev.. manager can be attached/detached from different
+ *                 devices
+ */
+
+static void omap_fb_output_poll_changed(struct drm_device *dev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	DBG("dev=%p", dev);
+	if (priv->fbdev) {
+		drm_fb_helper_hotplug_event(priv->fbdev);
+	}
+}
+
+static struct drm_mode_config_funcs omap_mode_config_funcs = {
+	.fb_create = omap_framebuffer_create,
+	.output_poll_changed = omap_fb_output_poll_changed,
+};
+
+static int get_connector_type(struct omap_dss_device *dssdev)
+{
+	switch (dssdev->type) {
+	case OMAP_DISPLAY_TYPE_HDMI:
+		return DRM_MODE_CONNECTOR_HDMIA;
+	case OMAP_DISPLAY_TYPE_DPI:
+		if (!strcmp(dssdev->name, "dvi"))
+			return DRM_MODE_CONNECTOR_DVID;
+		/* fallthrough */
+	default:
+		return DRM_MODE_CONNECTOR_Unknown;
+	}
+}
+
+#if 0 /* enable when dss2 supports hotplug */
+static int omap_drm_notifier(struct notifier_block *nb,
+		unsigned long evt, void *arg)
+{
+	switch (evt) {
+	case OMAP_DSS_SIZE_CHANGE:
+	case OMAP_DSS_HOTPLUG_CONNECT:
+	case OMAP_DSS_HOTPLUG_DISCONNECT: {
+		struct drm_device *dev = drm_device;
+		DBG("hotplug event: evt=%d, dev=%p", evt, dev);
+		if (dev) {
+			drm_sysfs_hotplug_event(dev);
+		}
+		return NOTIFY_OK;
+	}
+	default:  /* don't care about other events for now */
+		return NOTIFY_DONE;
+	}
+}
+#endif
+
+static void dump_video_chains(void)
+{
+	int i;
+
+	DBG("dumping video chains: ");
+	for (i = 0; i < omap_dss_get_num_overlays(); i++) {
+		struct omap_overlay *ovl = omap_dss_get_overlay(i);
+		struct omap_overlay_manager *mgr = ovl->manager;
+		struct omap_dss_device *dssdev = mgr ? mgr->device : NULL;
+		if (dssdev) {
+			DBG("%d: %s -> %s -> %s", i, ovl->name, mgr->name,
+						dssdev->name);
+		} else if (mgr) {
+			DBG("%d: %s -> %s", i, ovl->name, mgr->name);
+		} else {
+			DBG("%d: %s", i, ovl->name);
+		}
+	}
+}
+
+/* create encoders for each manager */
+static int create_encoder(struct drm_device *dev,
+		struct omap_overlay_manager *mgr)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_encoder *encoder = omap_encoder_init(dev, mgr);
+
+	if (!encoder) {
+		dev_err(dev->dev, "could not create encoder: %s\n",
+				mgr->name);
+		return -ENOMEM;
+	}
+
+	BUG_ON(priv->num_encoders >= ARRAY_SIZE(priv->encoders));
+
+	priv->encoders[priv->num_encoders++] = encoder;
+
+	return 0;
+}
+
+/* create connectors for each display device */
+static int create_connector(struct drm_device *dev,
+		struct omap_dss_device *dssdev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	static struct notifier_block *notifier;
+	struct drm_connector *connector;
+	int j;
+
+	if (!dssdev->driver) {
+		dev_warn(dev->dev, "%s has no driver.. skipping it\n",
+				dssdev->name);
+		return 0;
+	}
+
+	if (!(dssdev->driver->get_timings ||
+				dssdev->driver->read_edid)) {
+		dev_warn(dev->dev, "%s driver does not support "
+			"get_timings or read_edid.. skipping it!\n",
+			dssdev->name);
+		return 0;
+	}
+
+	connector = omap_connector_init(dev,
+			get_connector_type(dssdev), dssdev);
+
+	if (!connector) {
+		dev_err(dev->dev, "could not create connector: %s\n",
+				dssdev->name);
+		return -ENOMEM;
+	}
+
+	BUG_ON(priv->num_connectors >= ARRAY_SIZE(priv->connectors));
+
+	priv->connectors[priv->num_connectors++] = connector;
+
+#if 0 /* enable when dss2 supports hotplug */
+	notifier = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
+	notifier->notifier_call = omap_drm_notifier;
+	omap_dss_add_notify(dssdev, notifier);
+#else
+	notifier = NULL;
+#endif
+
+	for (j = 0; j < priv->num_encoders; j++) {
+		struct omap_overlay_manager *mgr =
+			omap_encoder_get_manager(priv->encoders[j]);
+		if (mgr->device == dssdev) {
+			drm_mode_connector_attach_encoder(connector,
+					priv->encoders[j]);
+		}
+	}
+
+	return 0;
+}
+
+/* create up to max_overlays CRTCs mapping to overlays.. by default,
+ * connect the overlays to different managers/encoders, giving priority
+ * to encoders connected to connectors with a detected connection
+ */
+static int create_crtc(struct drm_device *dev, struct omap_overlay *ovl,
+		int *j, unsigned int connected_connectors)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	struct omap_overlay_manager *mgr = NULL;
+	struct drm_crtc *crtc;
+
+	/* find next best connector, ones with detected connection first
+	 */
+	while (*j < priv->num_connectors && !mgr) {
+		if (connected_connectors & (1 << *j)) {
+			struct drm_encoder *encoder =
+				omap_connector_attached_encoder(
+						priv->connectors[*j]);
+			if (encoder) {
+				mgr = omap_encoder_get_manager(encoder);
+			}
+		}
+		(*j)++;
+	}
+
+	/* if we couldn't find another connected connector, lets start
+	 * looking at the unconnected connectors:
+	 *
+	 * note: it might not be immediately apparent, but thanks to
+	 * the !mgr check in both this loop and the one above, the only
+	 * way to enter this loop is with *j == priv->num_connectors,
+	 * so idx can never go negative.
+	 */
+	while (*j < 2 * priv->num_connectors && !mgr) {
+		int idx = *j - priv->num_connectors;
+		if (!(connected_connectors & (1 << idx))) {
+			struct drm_encoder *encoder =
+				omap_connector_attached_encoder(
+						priv->connectors[idx]);
+			if (encoder) {
+				mgr = omap_encoder_get_manager(encoder);
+			}
+		}
+		(*j)++;
+	}
+
+	crtc = omap_crtc_init(dev, ovl, priv->num_crtcs);
+
+	if (!crtc) {
+		dev_err(dev->dev, "could not create CRTC: %s\n",
+				ovl->name);
+		return -ENOMEM;
+	}
+
+	BUG_ON(priv->num_crtcs >= ARRAY_SIZE(priv->crtcs));
+
+	priv->crtcs[priv->num_crtcs++] = crtc;
+
+	return 0;
+}
+
+static int create_plane(struct drm_device *dev, struct omap_overlay *ovl,
+		unsigned int possible_crtcs)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_plane *plane =
+			omap_plane_init(dev, ovl, possible_crtcs, false);
+
+	if (!plane) {
+		dev_err(dev->dev, "could not create plane: %s\n",
+				ovl->name);
+		return -ENOMEM;
+	}
+
+	BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
+
+	priv->planes[priv->num_planes++] = plane;
+
+	return 0;
+}
+
+static int match_dev_name(struct omap_dss_device *dssdev, void *data)
+{
+	return !strcmp(dssdev->name, data);
+}
+
+static unsigned int detect_connectors(struct drm_device *dev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	unsigned int connected_connectors = 0;
+	int i;
+
+	for (i = 0; i < priv->num_connectors; i++) {
+		struct drm_connector *connector = priv->connectors[i];
+		if (omap_connector_detect(connector, true) ==
+				connector_status_connected) {
+			connected_connectors |= (1 << i);
+		}
+	}
+
+	return connected_connectors;
+}
+
+static int omap_modeset_init(struct drm_device *dev)
+{
+	const struct omap_drm_platform_data *pdata = dev->dev->platform_data;
+	struct omap_kms_platform_data *kms_pdata = NULL;
+	struct omap_drm_private *priv = dev->dev_private;
+	struct omap_dss_device *dssdev = NULL;
+	int i, j;
+	unsigned int connected_connectors = 0;
+
+	drm_mode_config_init(dev);
+
+	if (pdata && pdata->kms_pdata) {
+		kms_pdata = pdata->kms_pdata;
+
+		/* if platform data is provided by the board file, use it to
+		 * control which overlays, managers, and devices we own.
+		 */
+		for (i = 0; i < kms_pdata->mgr_cnt; i++) {
+			struct omap_overlay_manager *mgr =
+				omap_dss_get_overlay_manager(
+						kms_pdata->mgr_ids[i]);
+			create_encoder(dev, mgr);
+		}
+
+		for (i = 0; i < kms_pdata->dev_cnt; i++) {
+			struct omap_dss_device *dssdev =
+				omap_dss_find_device(
+					(void *)kms_pdata->dev_names[i],
+					match_dev_name);
+			if (!dssdev) {
+				dev_warn(dev->dev, "no such dssdev: %s\n",
+						kms_pdata->dev_names[i]);
+				continue;
+			}
+			create_connector(dev, dssdev);
+		}
+
+		connected_connectors = detect_connectors(dev);
+
+		j = 0;
+		for (i = 0; i < kms_pdata->ovl_cnt; i++) {
+			struct omap_overlay *ovl =
+				omap_dss_get_overlay(kms_pdata->ovl_ids[i]);
+			create_crtc(dev, ovl, &j, connected_connectors);
+		}
+
+		for (i = 0; i < kms_pdata->pln_cnt; i++) {
+			struct omap_overlay *ovl =
+				omap_dss_get_overlay(kms_pdata->pln_ids[i]);
+			create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+		}
+	} else {
+		/* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
+		 * to make educated guesses about everything else
+		 */
+		int max_overlays = min(omap_dss_get_num_overlays(), num_crtc);
+
+		for (i = 0; i < omap_dss_get_num_overlay_managers(); i++) {
+			create_encoder(dev, omap_dss_get_overlay_manager(i));
+		}
+
+		for_each_dss_dev(dssdev) {
+			create_connector(dev, dssdev);
+		}
+
+		connected_connectors = detect_connectors(dev);
+
+		j = 0;
+		for (i = 0; i < max_overlays; i++) {
+			create_crtc(dev, omap_dss_get_overlay(i),
+					&j, connected_connectors);
+		}
+
+		/* use any remaining overlays as drm planes */
+		for (; i < omap_dss_get_num_overlays(); i++) {
+			struct omap_overlay *ovl = omap_dss_get_overlay(i);
+			create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+		}
+	}
+
+	/* for now keep the mapping of CRTCs and encoders static.. */
+	for (i = 0; i < priv->num_encoders; i++) {
+		struct drm_encoder *encoder = priv->encoders[i];
+		struct omap_overlay_manager *mgr =
+				omap_encoder_get_manager(encoder);
+
+		encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
+
+		DBG("%s: possible_crtcs=%08x", mgr->name,
+					encoder->possible_crtcs);
+	}
+
+	dump_video_chains();
+
+	dev->mode_config.min_width = 32;
+	dev->mode_config.min_height = 32;
+
+	/* note: eventually will need some cpu_is_omapXYZ() type stuff here
+	 * to fill in these limits properly on different OMAP generations..
+	 */
+	dev->mode_config.max_width = 2048;
+	dev->mode_config.max_height = 2048;
+
+	dev->mode_config.funcs = &omap_mode_config_funcs;
+
+	return 0;
+}
+
+static void omap_modeset_free(struct drm_device *dev)
+{
+	drm_mode_config_cleanup(dev);
+}
+
+/*
+ * drm ioctl funcs
+ */
+
+
+static int ioctl_get_param(struct drm_device *dev, void *data,
+		struct drm_file *file_priv)
+{
+	struct drm_omap_param *args = data;
+
+	DBG("%p: param=%llu", dev, args->param);
+
+	switch (args->param) {
+	case OMAP_PARAM_CHIPSET_ID:
+		args->value = GET_OMAP_TYPE;
+		break;
+	default:
+		DBG("unknown parameter %lld", args->param);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ioctl_set_param(struct drm_device *dev, void *data,
+		struct drm_file *file_priv)
+{
+	struct drm_omap_param *args = data;
+
+	switch (args->param) {
+	default:
+		DBG("unknown parameter %lld", args->param);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ioctl_gem_new(struct drm_device *dev, void *data,
+		struct drm_file *file_priv)
+{
+	struct drm_omap_gem_new *args = data;
+	DBG("%p:%p: size=0x%08x, flags=%08x", dev, file_priv,
+			args->size.bytes, args->flags);
+	return omap_gem_new_handle(dev, file_priv, args->size,
+			args->flags, &args->handle);
+}
+
+static int ioctl_gem_cpu_prep(struct drm_device *dev, void *data,
+		struct drm_file *file_priv)
+{
+	struct drm_omap_gem_cpu_prep *args = data;
+	struct drm_gem_object *obj;
+	int ret;
+
+	VERB("%p:%p: handle=%d, op=%x", dev, file_priv, args->handle, args->op);
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (!obj) {
+		return -ENOENT;
+	}
+
+	ret = omap_gem_op_sync(obj, args->op);
+
+	if (!ret) {
+		ret = omap_gem_op_start(obj, args->op);
+	}
+
+	drm_gem_object_unreference_unlocked(obj);
+
+	return ret;
+}
+
+static int ioctl_gem_cpu_fini(struct drm_device *dev, void *data,
+		struct drm_file *file_priv)
+{
+	struct drm_omap_gem_cpu_fini *args = data;
+	struct drm_gem_object *obj;
+	int ret;
+
+	VERB("%p:%p: handle=%d", dev, file_priv, args->handle);
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (!obj) {
+		return -ENOENT;
+	}
+
+	/* XXX flushy, flushy */
+	ret = 0;
+
+	if (!ret) {
+		ret = omap_gem_op_finish(obj, args->op);
+	}
+
+	drm_gem_object_unreference_unlocked(obj);
+
+	return ret;
+}
+
+static int ioctl_gem_info(struct drm_device *dev, void *data,
+		struct drm_file *file_priv)
+{
+	struct drm_omap_gem_info *args = data;
+	struct drm_gem_object *obj;
+	int ret = 0;
+
+	DBG("%p:%p: handle=%d", dev, file_priv, args->handle);
+
+	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+	if (!obj) {
+		return -ENOENT;
+	}
+
+	args->size = omap_gem_mmap_size(obj);
+	args->offset = omap_gem_mmap_offset(obj);
+
+	drm_gem_object_unreference_unlocked(obj);
+
+	return ret;
+}
+
+struct drm_ioctl_desc ioctls[DRM_COMMAND_END - DRM_COMMAND_BASE] = {
+	DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM, ioctl_get_param, DRM_UNLOCKED|DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM, ioctl_set_param, DRM_UNLOCKED|DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
+	DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW, ioctl_gem_new, DRM_UNLOCKED|DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP, ioctl_gem_cpu_prep, DRM_UNLOCKED|DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI, ioctl_gem_cpu_fini, DRM_UNLOCKED|DRM_AUTH),
+	DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO, ioctl_gem_info, DRM_UNLOCKED|DRM_AUTH),
+};
+
+/*
+ * drm driver funcs
+ */
+
+/**
+ * load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ *   - initialize the memory manager
+ *   - allocate initial config memory
+ *   - setup the DRM framebuffer with the allocated memory
+ */
+static int dev_load(struct drm_device *dev, unsigned long flags)
+{
+	struct omap_drm_private *priv;
+	int ret;
+
+	DBG("load: dev=%p", dev);
+
+	drm_device = dev;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(dev->dev, "could not allocate priv\n");
+		return -ENOMEM;
+	}
+
+	dev->dev_private = priv;
+
+	priv->wq = alloc_workqueue("omapdrm",
+			WQ_UNBOUND | WQ_NON_REENTRANT, 1);
+
+	INIT_LIST_HEAD(&priv->obj_list);
+
+	omap_gem_init(dev);
+
+	ret = omap_modeset_init(dev);
+	if (ret) {
+		dev_err(dev->dev, "omap_modeset_init failed: ret=%d\n", ret);
+		dev->dev_private = NULL;
+		kfree(priv);
+		return ret;
+	}
+
+	priv->fbdev = omap_fbdev_init(dev);
+	if (!priv->fbdev) {
+		dev_warn(dev->dev, "omap_fbdev_init failed\n");
+		/* well, limp along without an fbdev.. maybe X11 will work? */
+	}
+
+	drm_kms_helper_poll_init(dev);
+
+	ret = drm_vblank_init(dev, priv->num_crtcs);
+	if (ret) {
+		dev_warn(dev->dev, "could not init vblank\n");
+	}
+
+	return 0;
+}
+
+static int dev_unload(struct drm_device *dev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+
+	DBG("unload: dev=%p", dev);
+
+	drm_vblank_cleanup(dev);
+	drm_kms_helper_poll_fini(dev);
+
+	omap_fbdev_free(dev);
+	omap_modeset_free(dev);
+	omap_gem_deinit(dev);
+
+	flush_workqueue(priv->wq);
+	destroy_workqueue(priv->wq);
+
+	kfree(dev->dev_private);
+	dev->dev_private = NULL;
+
+	return 0;
+}
+
+static int dev_open(struct drm_device *dev, struct drm_file *file)
+{
+	file->driver_priv = NULL;
+
+	DBG("open: dev=%p, file=%p", dev, file);
+
+	return 0;
+}
+
+static int dev_firstopen(struct drm_device *dev)
+{
+	DBG("firstopen: dev=%p", dev);
+	return 0;
+}
+
+/**
+ * lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited.  In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ */
+static void dev_lastclose(struct drm_device *dev)
+{
+	/* we don't support vga-switcheroo.. so just make sure the fbdev
+	 * mode is active
+	 */
+	struct omap_drm_private *priv = dev->dev_private;
+	int ret;
+
+	DBG("lastclose: dev=%p", dev);
+
+	ret = drm_fb_helper_restore_fbdev_mode(priv->fbdev);
+	if (ret)
+		DBG("failed to restore crtc mode");
+}
+
+static void dev_preclose(struct drm_device *dev, struct drm_file *file)
+{
+	DBG("preclose: dev=%p", dev);
+}
+
+static void dev_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	DBG("postclose: dev=%p, file=%p", dev, file);
+}
+
+/**
+ * enable_vblank - enable vblank interrupt events
+ * @dev: DRM device
+ * @crtc: which irq to enable
+ *
+ * Enable vblank interrupts for @crtc.  If the device doesn't have
+ * a hardware vblank counter, this routine should be a no-op, since
+ * interrupts will have to stay on to keep the count accurate.
+ *
+ * RETURNS
+ * Zero on success, appropriate errno if the given @crtc's vblank
+ * interrupt cannot be enabled.
+ */
+static int dev_enable_vblank(struct drm_device *dev, int crtc)
+{
+	DBG("enable_vblank: dev=%p, crtc=%d", dev, crtc);
+	return 0;
+}
+
+/**
+ * disable_vblank - disable vblank interrupt events
+ * @dev: DRM device
+ * @crtc: which irq to enable
+ *
+ * Disable vblank interrupts for @crtc.  If the device doesn't have
+ * a hardware vblank counter, this routine should be a no-op, since
+ * interrupts will have to stay on to keep the count accurate.
+ */
+static void dev_disable_vblank(struct drm_device *dev, int crtc)
+{
+	DBG("disable_vblank: dev=%p, crtc=%d", dev, crtc);
+}
+
+static irqreturn_t dev_irq_handler(DRM_IRQ_ARGS)
+{
+	return IRQ_HANDLED;
+}
+
+static void dev_irq_preinstall(struct drm_device *dev)
+{
+	DBG("irq_preinstall: dev=%p", dev);
+}
+
+static int dev_irq_postinstall(struct drm_device *dev)
+{
+	DBG("irq_postinstall: dev=%p", dev);
+	return 0;
+}
+
+static void dev_irq_uninstall(struct drm_device *dev)
+{
+	DBG("irq_uninstall: dev=%p", dev);
+}
+
+static struct vm_operations_struct omap_gem_vm_ops = {
+	.fault = omap_gem_fault,
+	.open = drm_gem_vm_open,
+	.close = drm_gem_vm_close,
+};
+
+static const struct file_operations omapdriver_fops = {
+		.owner = THIS_MODULE,
+		.open = drm_open,
+		.unlocked_ioctl = drm_ioctl,
+		.release = drm_release,
+		.mmap = omap_gem_mmap,
+		.poll = drm_poll,
+		.fasync = drm_fasync,
+		.read = drm_read,
+		.llseek = noop_llseek,
+};
+
+static struct drm_driver omap_drm_driver = {
+		.driver_features =
+				DRIVER_HAVE_IRQ | DRIVER_MODESET | DRIVER_GEM,
+		.load = dev_load,
+		.unload = dev_unload,
+		.open = dev_open,
+		.firstopen = dev_firstopen,
+		.lastclose = dev_lastclose,
+		.preclose = dev_preclose,
+		.postclose = dev_postclose,
+		.get_vblank_counter = drm_vblank_count,
+		.enable_vblank = dev_enable_vblank,
+		.disable_vblank = dev_disable_vblank,
+		.irq_preinstall = dev_irq_preinstall,
+		.irq_postinstall = dev_irq_postinstall,
+		.irq_uninstall = dev_irq_uninstall,
+		.irq_handler = dev_irq_handler,
+		.reclaim_buffers = drm_core_reclaim_buffers,
+#ifdef CONFIG_DEBUG_FS
+		.debugfs_init = omap_debugfs_init,
+		.debugfs_cleanup = omap_debugfs_cleanup,
+#endif
+		.gem_init_object = omap_gem_init_object,
+		.gem_free_object = omap_gem_free_object,
+		.gem_vm_ops = &omap_gem_vm_ops,
+		.dumb_create = omap_gem_dumb_create,
+		.dumb_map_offset = omap_gem_dumb_map_offset,
+		.dumb_destroy = omap_gem_dumb_destroy,
+		.ioctls = ioctls,
+		.num_ioctls = DRM_OMAP_NUM_IOCTLS,
+		.fops = &omapdriver_fops,
+		.name = DRIVER_NAME,
+		.desc = DRIVER_DESC,
+		.date = DRIVER_DATE,
+		.major = DRIVER_MAJOR,
+		.minor = DRIVER_MINOR,
+		.patchlevel = DRIVER_PATCHLEVEL,
+};
+
+static int pdev_suspend(struct platform_device *pDevice, pm_message_t state)
+{
+	DBG("");
+	return 0;
+}
+
+static int pdev_resume(struct platform_device *device)
+{
+	DBG("");
+	return 0;
+}
+
+static void pdev_shutdown(struct platform_device *device)
+{
+	DBG("");
+}
+
+static int pdev_probe(struct platform_device *device)
+{
+	DBG("%s", device->name);
+	return drm_platform_init(&omap_drm_driver, device);
+}
+
+static int pdev_remove(struct platform_device *device)
+{
+	DBG("");
+	drm_platform_exit(&omap_drm_driver, device);
+
+	platform_driver_unregister(&omap_dmm_driver);
+	return 0;
+}
+
+struct platform_driver pdev = {
+		.driver = {
+			.name = DRIVER_NAME,
+			.owner = THIS_MODULE,
+		},
+		.probe = pdev_probe,
+		.remove = pdev_remove,
+		.suspend = pdev_suspend,
+		.resume = pdev_resume,
+		.shutdown = pdev_shutdown,
+};
+
+static int __init omap_drm_init(void)
+{
+	DBG("init");
+	if (platform_driver_register(&omap_dmm_driver)) {
+		/* we can continue on without DMM.. so not fatal */
+		dev_err(NULL, "DMM registration failed\n");
+	}
+	return platform_driver_register(&pdev);
+}
+
+static void __exit omap_drm_fini(void)
+{
+	DBG("fini");
+	platform_driver_unregister(&pdev);
+}
+
+/* need late_initcall() so we load after dss_driver's are loaded */
+late_initcall(omap_drm_init);
+module_exit(omap_drm_fini);
+
+MODULE_AUTHOR("Rob Clark <rob@ti.com>");
+MODULE_DESCRIPTION("OMAP DRM Display Driver");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/omapdrm/omap_drv.h b/drivers/staging/omapdrm/omap_drv.h
new file mode 100644
index 00000000..b7e0f077
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_drv.h
@@ -0,0 +1,190 @@
+/*
+ * drivers/staging/omapdrm/omap_drv.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_DRV_H__
+#define __OMAP_DRV_H__
+
+#include <video/omapdss.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include "omap_drm.h"
+#include "omap_priv.h"
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+#define VERB(fmt, ...) if (0) DRM_DEBUG(fmt, ##__VA_ARGS__) /* verbose debug */
+
+#define MODULE_NAME     "omapdrm"
+
+/* max # of mapper-id's that can be assigned.. todo, come up with a better
+ * (but still inexpensive) way to store/access per-buffer mapper private
+ * data..
+ */
+#define MAX_MAPPERS 2
+
+struct omap_drm_private {
+	unsigned int num_crtcs;
+	struct drm_crtc *crtcs[8];
+
+	unsigned int num_planes;
+	struct drm_plane *planes[8];
+
+	unsigned int num_encoders;
+	struct drm_encoder *encoders[8];
+
+	unsigned int num_connectors;
+	struct drm_connector *connectors[8];
+
+	struct drm_fb_helper *fbdev;
+
+	struct workqueue_struct *wq;
+
+	struct list_head obj_list;
+
+	bool has_dmm;
+};
+
+#ifdef CONFIG_DEBUG_FS
+int omap_debugfs_init(struct drm_minor *minor);
+void omap_debugfs_cleanup(struct drm_minor *minor);
+void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m);
+void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m);
+void omap_gem_describe_objects(struct list_head *list, struct seq_file *m);
+#endif
+
+struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev);
+void omap_fbdev_free(struct drm_device *dev);
+
+struct drm_crtc *omap_crtc_init(struct drm_device *dev,
+		struct omap_overlay *ovl, int id);
+
+struct drm_plane *omap_plane_init(struct drm_device *dev,
+		struct omap_overlay *ovl, unsigned int possible_crtcs,
+		bool priv);
+int omap_plane_dpms(struct drm_plane *plane, int mode);
+int omap_plane_mode_set(struct drm_plane *plane,
+		struct drm_crtc *crtc, struct drm_framebuffer *fb,
+		int crtc_x, int crtc_y,
+		unsigned int crtc_w, unsigned int crtc_h,
+		uint32_t src_x, uint32_t src_y,
+		uint32_t src_w, uint32_t src_h);
+void omap_plane_on_endwin(struct drm_plane *plane,
+		void (*fxn)(void *), void *arg);
+
+struct drm_encoder *omap_encoder_init(struct drm_device *dev,
+		struct omap_overlay_manager *mgr);
+struct omap_overlay_manager *omap_encoder_get_manager(
+		struct drm_encoder *encoder);
+struct drm_encoder *omap_connector_attached_encoder(
+		struct drm_connector *connector);
+enum drm_connector_status omap_connector_detect(
+		struct drm_connector *connector, bool force);
+
+struct drm_connector *omap_connector_init(struct drm_device *dev,
+		int connector_type, struct omap_dss_device *dssdev);
+void omap_connector_mode_set(struct drm_connector *connector,
+		struct drm_display_mode *mode);
+void omap_connector_flush(struct drm_connector *connector,
+		int x, int y, int w, int h);
+
+uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats,
+		uint32_t max_formats, enum omap_color_mode supported_modes);
+struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
+		struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd);
+struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
+		struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos);
+struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p);
+int omap_framebuffer_replace(struct drm_framebuffer *a,
+		struct drm_framebuffer *b, void *arg,
+		void (*unpin)(void *arg, struct drm_gem_object *bo));
+void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y,
+		struct omap_overlay_info *info);
+struct drm_connector *omap_framebuffer_get_next_connector(
+		struct drm_framebuffer *fb, struct drm_connector *from);
+void omap_framebuffer_flush(struct drm_framebuffer *fb,
+		int x, int y, int w, int h);
+
+void omap_gem_init(struct drm_device *dev);
+void omap_gem_deinit(struct drm_device *dev);
+
+struct drm_gem_object *omap_gem_new(struct drm_device *dev,
+		union omap_gem_size gsize, uint32_t flags);
+int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file,
+		union omap_gem_size gsize, uint32_t flags, uint32_t *handle);
+void omap_gem_free_object(struct drm_gem_object *obj);
+int omap_gem_init_object(struct drm_gem_object *obj);
+void *omap_gem_vaddr(struct drm_gem_object *obj);
+int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
+		uint32_t handle, uint64_t *offset);
+int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+		uint32_t handle);
+int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+		struct drm_mode_create_dumb *args);
+int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma);
+int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op);
+int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op);
+int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op);
+int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
+		void (*fxn)(void *arg), void *arg);
+int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll);
+int omap_gem_get_paddr(struct drm_gem_object *obj,
+		dma_addr_t *paddr, bool remap);
+int omap_gem_put_paddr(struct drm_gem_object *obj);
+uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj);
+size_t omap_gem_mmap_size(struct drm_gem_object *obj);
+
+static inline int align_pitch(int pitch, int width, int bpp)
+{
+	int bytespp = (bpp + 7) / 8;
+	/* in case someone tries to feed us a completely bogus stride: */
+	pitch = max(pitch, width * bytespp);
+	/* PVR needs alignment to 8 pixels.. right now that is the most
+	 * restrictive stride requirement..
+	 */
+	return ALIGN(pitch, 8 * bytespp);
+}
+
+/* should these be made into common util helpers?
+ */
+
+static inline int objects_lookup(struct drm_device *dev,
+		struct drm_file *filp, uint32_t pixel_format,
+		struct drm_gem_object **bos, uint32_t *handles)
+{
+	int i, n = drm_format_num_planes(pixel_format);
+
+	for (i = 0; i < n; i++) {
+		bos[i] = drm_gem_object_lookup(dev, filp, handles[i]);
+		if (!bos[i]) {
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	while (--i > 0) {
+		drm_gem_object_unreference_unlocked(bos[i]);
+	}
+	return -ENOENT;
+}
+
+#endif /* __OMAP_DRV_H__ */
diff --git a/drivers/staging/omapdrm/omap_encoder.c b/drivers/staging/omapdrm/omap_encoder.c
new file mode 100644
index 00000000..06c52cb6
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_encoder.c
@@ -0,0 +1,171 @@
+/*
+ * drivers/staging/omapdrm/omap_encoder.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * encoder funcs
+ */
+
+#define to_omap_encoder(x) container_of(x, struct omap_encoder, base)
+
+struct omap_encoder {
+	struct drm_encoder base;
+	struct omap_overlay_manager *mgr;
+};
+
+static void omap_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	DBG("%s", omap_encoder->mgr->name);
+	drm_encoder_cleanup(encoder);
+	kfree(omap_encoder);
+}
+
+static void omap_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	DBG("%s: %d", omap_encoder->mgr->name, mode);
+}
+
+static bool omap_encoder_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	DBG("%s", omap_encoder->mgr->name);
+	return true;
+}
+
+static void omap_encoder_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
+	struct omap_drm_private *priv = dev->dev_private;
+	int i;
+
+	mode = adjusted_mode;
+
+	DBG("%s: set mode: %dx%d", omap_encoder->mgr->name,
+			mode->hdisplay, mode->vdisplay);
+
+	for (i = 0; i < priv->num_connectors; i++) {
+		struct drm_connector *connector = priv->connectors[i];
+		if (connector->encoder == encoder) {
+			omap_connector_mode_set(connector, mode);
+		}
+	}
+}
+
+static void omap_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	struct drm_encoder_helper_funcs *encoder_funcs =
+				encoder->helper_private;
+	DBG("%s", omap_encoder->mgr->name);
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_encoder_commit(struct drm_encoder *encoder)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	struct drm_encoder_helper_funcs *encoder_funcs =
+				encoder->helper_private;
+	DBG("%s", omap_encoder->mgr->name);
+	omap_encoder->mgr->apply(omap_encoder->mgr);
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static const struct drm_encoder_funcs omap_encoder_funcs = {
+	.destroy = omap_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
+	.dpms = omap_encoder_dpms,
+	.mode_fixup = omap_encoder_mode_fixup,
+	.mode_set = omap_encoder_mode_set,
+	.prepare = omap_encoder_prepare,
+	.commit = omap_encoder_commit,
+};
+
+struct omap_overlay_manager *omap_encoder_get_manager(
+		struct drm_encoder *encoder)
+{
+	struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
+	return omap_encoder->mgr;
+}
+
+/* initialize encoder */
+struct drm_encoder *omap_encoder_init(struct drm_device *dev,
+		struct omap_overlay_manager *mgr)
+{
+	struct drm_encoder *encoder = NULL;
+	struct omap_encoder *omap_encoder;
+	struct omap_overlay_manager_info info;
+	int ret;
+
+	DBG("%s", mgr->name);
+
+	omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL);
+	if (!omap_encoder) {
+		dev_err(dev->dev, "could not allocate encoder\n");
+		goto fail;
+	}
+
+	omap_encoder->mgr = mgr;
+	encoder = &omap_encoder->base;
+
+	drm_encoder_init(dev, encoder, &omap_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+	drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs);
+
+	mgr->get_manager_info(mgr, &info);
+
+	/* TODO: fix hard-coded setup.. */
+	info.default_color = 0x00000000;
+	info.trans_key = 0x00000000;
+	info.trans_key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+	info.trans_enabled = false;
+
+	ret = mgr->set_manager_info(mgr, &info);
+	if (ret) {
+		dev_err(dev->dev, "could not set manager info\n");
+		goto fail;
+	}
+
+	ret = mgr->apply(mgr);
+	if (ret) {
+		dev_err(dev->dev, "could not apply\n");
+		goto fail;
+	}
+
+	return encoder;
+
+fail:
+	if (encoder) {
+		omap_encoder_destroy(encoder);
+	}
+
+	return NULL;
+}
diff --git a/drivers/staging/omapdrm/omap_fb.c b/drivers/staging/omapdrm/omap_fb.c
new file mode 100644
index 00000000..04b235b6
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_fb.c
@@ -0,0 +1,399 @@
+/*
+ * drivers/staging/omapdrm/omap_fb.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * framebuffer funcs
+ */
+
+/* per-format info: */
+struct format {
+	enum omap_color_mode dss_format;
+	uint32_t pixel_format;
+	struct {
+		int stride_bpp;           /* this times width is stride */
+		int sub_y;                /* sub-sample in y dimension */
+	} planes[4];
+	bool yuv;
+};
+
+static const struct format formats[] = {
+	/* 16bpp [A]RGB: */
+	{ OMAP_DSS_COLOR_RGB16,       DRM_FORMAT_RGB565,   {{2, 1}}, false }, /* RGB16-565 */
+	{ OMAP_DSS_COLOR_RGB12U,      DRM_FORMAT_RGBX4444, {{2, 1}}, false }, /* RGB12x-4444 */
+	{ OMAP_DSS_COLOR_RGBX16,      DRM_FORMAT_XRGB4444, {{2, 1}}, false }, /* xRGB12-4444 */
+	{ OMAP_DSS_COLOR_RGBA16,      DRM_FORMAT_RGBA4444, {{2, 1}}, false }, /* RGBA12-4444 */
+	{ OMAP_DSS_COLOR_ARGB16,      DRM_FORMAT_ARGB4444, {{2, 1}}, false }, /* ARGB16-4444 */
+	{ OMAP_DSS_COLOR_XRGB16_1555, DRM_FORMAT_XRGB1555, {{2, 1}}, false }, /* xRGB15-1555 */
+	{ OMAP_DSS_COLOR_ARGB16_1555, DRM_FORMAT_ARGB1555, {{2, 1}}, false }, /* ARGB16-1555 */
+	/* 24bpp RGB: */
+	{ OMAP_DSS_COLOR_RGB24P,      DRM_FORMAT_RGB888,   {{3, 1}}, false }, /* RGB24-888 */
+	/* 32bpp [A]RGB: */
+	{ OMAP_DSS_COLOR_RGBX32,      DRM_FORMAT_RGBX8888, {{4, 1}}, false }, /* RGBx24-8888 */
+	{ OMAP_DSS_COLOR_RGB24U,      DRM_FORMAT_XRGB8888, {{4, 1}}, false }, /* xRGB24-8888 */
+	{ OMAP_DSS_COLOR_RGBA32,      DRM_FORMAT_RGBA8888, {{4, 1}}, false }, /* RGBA32-8888 */
+	{ OMAP_DSS_COLOR_ARGB32,      DRM_FORMAT_ARGB8888, {{4, 1}}, false }, /* ARGB32-8888 */
+	/* YUV: */
+	{ OMAP_DSS_COLOR_NV12,        DRM_FORMAT_NV12,     {{1, 1}, {1, 2}}, true },
+	{ OMAP_DSS_COLOR_YUV2,        DRM_FORMAT_YUYV,     {{2, 1}}, true },
+	{ OMAP_DSS_COLOR_UYVY,        DRM_FORMAT_UYVY,     {{2, 1}}, true },
+};
+
+/* convert from overlay's pixel formats bitmask to an array of fourcc's */
+uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats,
+		uint32_t max_formats, enum omap_color_mode supported_modes)
+{
+	uint32_t nformats = 0;
+	int i = 0;
+
+	for (i = 0; i < ARRAY_SIZE(formats) && nformats < max_formats; i++)
+		if (formats[i].dss_format & supported_modes)
+			pixel_formats[nformats++] = formats[i].pixel_format;
+
+	return nformats;
+}
+
+/* per-plane info for the fb: */
+struct plane {
+	struct drm_gem_object *bo;
+	uint32_t pitch;
+	uint32_t offset;
+	dma_addr_t paddr;
+};
+
+#define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base)
+
+struct omap_framebuffer {
+	struct drm_framebuffer base;
+	const struct format *format;
+	struct plane planes[4];
+};
+
+static int omap_framebuffer_create_handle(struct drm_framebuffer *fb,
+		struct drm_file *file_priv,
+		unsigned int *handle)
+{
+	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+	return drm_gem_handle_create(file_priv,
+			omap_fb->planes[0].bo, handle);
+}
+
+static void omap_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+	int i, n = drm_format_num_planes(fb->pixel_format);
+
+	DBG("destroy: FB ID: %d (%p)", fb->base.id, fb);
+
+	drm_framebuffer_cleanup(fb);
+
+	for (i = 0; i < n; i++) {
+		struct plane *plane = &omap_fb->planes[i];
+		if (plane->bo)
+			drm_gem_object_unreference_unlocked(plane->bo);
+	}
+
+	kfree(omap_fb);
+}
+
+static int omap_framebuffer_dirty(struct drm_framebuffer *fb,
+		struct drm_file *file_priv, unsigned flags, unsigned color,
+		struct drm_clip_rect *clips, unsigned num_clips)
+{
+	int i;
+
+	for (i = 0; i < num_clips; i++) {
+		omap_framebuffer_flush(fb, clips[i].x1, clips[i].y1,
+					clips[i].x2 - clips[i].x1,
+					clips[i].y2 - clips[i].y1);
+	}
+
+	return 0;
+}
+
+static const struct drm_framebuffer_funcs omap_framebuffer_funcs = {
+	.create_handle = omap_framebuffer_create_handle,
+	.destroy = omap_framebuffer_destroy,
+	.dirty = omap_framebuffer_dirty,
+};
+
+/* update ovl info for scanout, handles cases of multi-planar fb's, etc.
+ */
+void omap_framebuffer_update_scanout(struct drm_framebuffer *fb, int x, int y,
+		struct omap_overlay_info *info)
+{
+	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+	const struct format *format = omap_fb->format;
+	struct plane *plane = &omap_fb->planes[0];
+	unsigned int offset;
+
+	offset = plane->offset +
+			(x * format->planes[0].stride_bpp) +
+			(y * plane->pitch / format->planes[0].sub_y);
+
+	info->color_mode   = format->dss_format;
+	info->paddr        = plane->paddr + offset;
+	info->screen_width = plane->pitch / format->planes[0].stride_bpp;
+
+	if (format->dss_format == OMAP_DSS_COLOR_NV12) {
+		plane = &omap_fb->planes[1];
+		offset = plane->offset +
+				(x * format->planes[1].stride_bpp) +
+				(y * plane->pitch / format->planes[1].sub_y);
+		info->p_uv_addr = plane->paddr + offset;
+	} else {
+		info->p_uv_addr = 0;
+	}
+}
+
+/* Call for unpin 'a' (if not NULL), and pin 'b' (if not NULL).  Although
+ * buffers to unpin are just just pushed to the unpin fifo so that the
+ * caller can defer unpin until vblank.
+ *
+ * Note if this fails (ie. something went very wrong!), all buffers are
+ * unpinned, and the caller disables the overlay.  We could have tried
+ * to revert back to the previous set of pinned buffers but if things are
+ * hosed there is no guarantee that would succeed.
+ */
+int omap_framebuffer_replace(struct drm_framebuffer *a,
+		struct drm_framebuffer *b, void *arg,
+		void (*unpin)(void *arg, struct drm_gem_object *bo))
+{
+	int ret = 0, i, na, nb;
+	struct omap_framebuffer *ofba = to_omap_framebuffer(a);
+	struct omap_framebuffer *ofbb = to_omap_framebuffer(b);
+
+	na = a ? drm_format_num_planes(a->pixel_format) : 0;
+	nb = b ? drm_format_num_planes(b->pixel_format) : 0;
+
+	for (i = 0; i < max(na, nb); i++) {
+		struct plane *pa, *pb;
+
+		pa = (i < na) ? &ofba->planes[i] : NULL;
+		pb = (i < nb) ? &ofbb->planes[i] : NULL;
+
+		if (pa) {
+			unpin(arg, pa->bo);
+			pa->paddr = 0;
+		}
+
+		if (pb && !ret)
+			ret = omap_gem_get_paddr(pb->bo, &pb->paddr, true);
+	}
+
+	if (ret) {
+		/* something went wrong.. unpin what has been pinned */
+		for (i = 0; i < nb; i++) {
+			struct plane *pb = &ofba->planes[i];
+			if (pb->paddr) {
+				unpin(arg, pb->bo);
+				pb->paddr = 0;
+			}
+		}
+	}
+
+	return ret;
+}
+
+struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p)
+{
+	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+	if (p >= drm_format_num_planes(fb->pixel_format))
+		return NULL;
+	return omap_fb->planes[p].bo;
+}
+
+/* iterate thru all the connectors, returning ones that are attached
+ * to the same fb..
+ */
+struct drm_connector *omap_framebuffer_get_next_connector(
+		struct drm_framebuffer *fb, struct drm_connector *from)
+{
+	struct drm_device *dev = fb->dev;
+	struct list_head *connector_list = &dev->mode_config.connector_list;
+	struct drm_connector *connector = from;
+
+	if (!from) {
+		return list_first_entry(connector_list, typeof(*from), head);
+	}
+
+	list_for_each_entry_from(connector, connector_list, head) {
+		if (connector != from) {
+			struct drm_encoder *encoder = connector->encoder;
+			struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
+			if (crtc && crtc->fb == fb) {
+				return connector;
+			}
+		}
+	}
+
+	return NULL;
+}
+
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+void omap_framebuffer_flush(struct drm_framebuffer *fb,
+		int x, int y, int w, int h)
+{
+	struct drm_connector *connector = NULL;
+
+	VERB("flush: %d,%d %dx%d, fb=%p", x, y, w, h, fb);
+
+	while ((connector = omap_framebuffer_get_next_connector(fb, connector))) {
+		/* only consider connectors that are part of a chain */
+		if (connector->encoder && connector->encoder->crtc) {
+			/* TODO: maybe this should propagate thru the crtc who
+			 * could do the coordinate translation..
+			 */
+			struct drm_crtc *crtc = connector->encoder->crtc;
+			int cx = max(0, x - crtc->x);
+			int cy = max(0, y - crtc->y);
+			int cw = w + (x - crtc->x) - cx;
+			int ch = h + (y - crtc->y) - cy;
+
+			omap_connector_flush(connector, cx, cy, cw, ch);
+		}
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m)
+{
+	struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+	int i, n = drm_format_num_planes(fb->pixel_format);
+
+	seq_printf(m, "fb: %dx%d@%4.4s\n", fb->width, fb->height,
+			(char *)&fb->pixel_format);
+
+	for (i = 0; i < n; i++) {
+		struct plane *plane = &omap_fb->planes[i];
+		seq_printf(m, "   %d: offset=%d pitch=%d, obj: ",
+				i, plane->offset, plane->pitch);
+		omap_gem_describe(plane->bo, m);
+	}
+}
+#endif
+
+struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
+		struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd)
+{
+	struct drm_gem_object *bos[4];
+	struct drm_framebuffer *fb;
+	int ret;
+
+	ret = objects_lookup(dev, file, mode_cmd->pixel_format,
+			bos, mode_cmd->handles);
+	if (ret)
+		return ERR_PTR(ret);
+
+	fb = omap_framebuffer_init(dev, mode_cmd, bos);
+	if (IS_ERR(fb)) {
+		int i, n = drm_format_num_planes(mode_cmd->pixel_format);
+		for (i = 0; i < n; i++)
+			drm_gem_object_unreference_unlocked(bos[i]);
+		return fb;
+	}
+	return fb;
+}
+
+struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
+		struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos)
+{
+	struct omap_framebuffer *omap_fb;
+	struct drm_framebuffer *fb = NULL;
+	const struct format *format = NULL;
+	int ret, i, n = drm_format_num_planes(mode_cmd->pixel_format);
+
+	DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%4.4s)",
+			dev, mode_cmd, mode_cmd->width, mode_cmd->height,
+			(char *)&mode_cmd->pixel_format);
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++) {
+		if (formats[i].pixel_format == mode_cmd->pixel_format) {
+			format = &formats[i];
+			break;
+		}
+	}
+
+	if (!format) {
+		dev_err(dev->dev, "unsupported pixel format: %4.4s\n",
+				(char *)&mode_cmd->pixel_format);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL);
+	if (!omap_fb) {
+		dev_err(dev->dev, "could not allocate fb\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	fb = &omap_fb->base;
+	ret = drm_framebuffer_init(dev, fb, &omap_framebuffer_funcs);
+	if (ret) {
+		dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
+		goto fail;
+	}
+
+	DBG("create: FB ID: %d (%p)", fb->base.id, fb);
+
+	omap_fb->format = format;
+
+	for (i = 0; i < n; i++) {
+		struct plane *plane = &omap_fb->planes[i];
+		int size, pitch = mode_cmd->pitches[i];
+
+		if (pitch < (mode_cmd->width * format->planes[i].stride_bpp)) {
+			dev_err(dev->dev, "provided buffer pitch is too small! %d < %d\n",
+					pitch, mode_cmd->width * format->planes[i].stride_bpp);
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		size = pitch * mode_cmd->height / format->planes[i].sub_y;
+
+		if (size > (bos[i]->size - mode_cmd->offsets[i])) {
+			dev_err(dev->dev, "provided buffer object is too small! %d < %d\n",
+					bos[i]->size - mode_cmd->offsets[i], size);
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		plane->bo     = bos[i];
+		plane->offset = mode_cmd->offsets[i];
+		plane->pitch  = pitch;
+		plane->paddr  = 0;
+	}
+
+	drm_helper_mode_fill_fb_struct(fb, mode_cmd);
+
+	return fb;
+
+fail:
+	if (fb) {
+		omap_framebuffer_destroy(fb);
+	}
+	return ERR_PTR(ret);
+}
diff --git a/drivers/staging/omapdrm/omap_fbdev.c b/drivers/staging/omapdrm/omap_fbdev.c
new file mode 100644
index 00000000..11acd4c3
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_fbdev.c
@@ -0,0 +1,405 @@
+/*
+ * drivers/staging/omapdrm/omap_fbdev.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+#include "drm_crtc.h"
+#include "drm_fb_helper.h"
+
+MODULE_PARM_DESC(ywrap, "Enable ywrap scrolling (omap44xx and later, default 'y')");
+static bool ywrap_enabled = true;
+module_param_named(ywrap, ywrap_enabled, bool, 0644);
+
+/*
+ * fbdev funcs, to implement legacy fbdev interface on top of drm driver
+ */
+
+#define to_omap_fbdev(x) container_of(x, struct omap_fbdev, base)
+
+struct omap_fbdev {
+	struct drm_fb_helper base;
+	struct drm_framebuffer *fb;
+	struct drm_gem_object *bo;
+	bool ywrap_enabled;
+
+	/* for deferred dmm roll when getting called in atomic ctx */
+	struct work_struct work;
+};
+
+static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h);
+static struct drm_fb_helper *get_fb(struct fb_info *fbi);
+
+static ssize_t omap_fbdev_write(struct fb_info *fbi, const char __user *buf,
+		size_t count, loff_t *ppos)
+{
+	ssize_t res;
+
+	res = fb_sys_write(fbi, buf, count, ppos);
+	omap_fbdev_flush(fbi, 0, 0, fbi->var.xres, fbi->var.yres);
+
+	return res;
+}
+
+static void omap_fbdev_fillrect(struct fb_info *fbi,
+		const struct fb_fillrect *rect)
+{
+	sys_fillrect(fbi, rect);
+	omap_fbdev_flush(fbi, rect->dx, rect->dy, rect->width, rect->height);
+}
+
+static void omap_fbdev_copyarea(struct fb_info *fbi,
+		const struct fb_copyarea *area)
+{
+	sys_copyarea(fbi, area);
+	omap_fbdev_flush(fbi, area->dx, area->dy, area->width, area->height);
+}
+
+static void omap_fbdev_imageblit(struct fb_info *fbi,
+		const struct fb_image *image)
+{
+	sys_imageblit(fbi, image);
+	omap_fbdev_flush(fbi, image->dx, image->dy,
+				image->width, image->height);
+}
+
+static void pan_worker(struct work_struct *work)
+{
+	struct omap_fbdev *fbdev = container_of(work, struct omap_fbdev, work);
+	struct fb_info *fbi = fbdev->base.fbdev;
+	int npages;
+
+	/* DMM roll shifts in 4K pages: */
+	npages = fbi->fix.line_length >> PAGE_SHIFT;
+	omap_gem_roll(fbdev->bo, fbi->var.yoffset * npages);
+}
+
+static int omap_fbdev_pan_display(struct fb_var_screeninfo *var,
+		struct fb_info *fbi)
+{
+	struct drm_fb_helper *helper = get_fb(fbi);
+	struct omap_fbdev *fbdev = to_omap_fbdev(helper);
+
+	if (!helper)
+		goto fallback;
+
+	if (!fbdev->ywrap_enabled)
+		goto fallback;
+
+	if (drm_can_sleep()) {
+		pan_worker(&fbdev->work);
+	} else {
+		struct omap_drm_private *priv = helper->dev->dev_private;
+		queue_work(priv->wq, &fbdev->work);
+	}
+
+	return 0;
+
+fallback:
+	return drm_fb_helper_pan_display(var, fbi);
+}
+
+static struct fb_ops omap_fb_ops = {
+	.owner = THIS_MODULE,
+
+	/* Note: to properly handle manual update displays, we wrap the
+	 * basic fbdev ops which write to the framebuffer
+	 */
+	.fb_read = fb_sys_read,
+	.fb_write = omap_fbdev_write,
+	.fb_fillrect = omap_fbdev_fillrect,
+	.fb_copyarea = omap_fbdev_copyarea,
+	.fb_imageblit = omap_fbdev_imageblit,
+
+	.fb_check_var = drm_fb_helper_check_var,
+	.fb_set_par = drm_fb_helper_set_par,
+	.fb_pan_display = omap_fbdev_pan_display,
+	.fb_blank = drm_fb_helper_blank,
+	.fb_setcmap = drm_fb_helper_setcmap,
+
+	.fb_debug_enter = drm_fb_helper_debug_enter,
+	.fb_debug_leave = drm_fb_helper_debug_leave,
+};
+
+static int omap_fbdev_create(struct drm_fb_helper *helper,
+		struct drm_fb_helper_surface_size *sizes)
+{
+	struct omap_fbdev *fbdev = to_omap_fbdev(helper);
+	struct drm_device *dev = helper->dev;
+	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_framebuffer *fb = NULL;
+	union omap_gem_size gsize;
+	struct fb_info *fbi = NULL;
+	struct drm_mode_fb_cmd2 mode_cmd = {0};
+	dma_addr_t paddr;
+	int ret;
+
+	/* only doing ARGB32 since this is what is needed to alpha-blend
+	 * with video overlays:
+	 */
+	sizes->surface_bpp = 32;
+	sizes->surface_depth = 32;
+
+	DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width,
+			sizes->surface_height, sizes->surface_bpp,
+			sizes->fb_width, sizes->fb_height);
+
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+			sizes->surface_depth);
+
+	mode_cmd.width = sizes->surface_width;
+	mode_cmd.height = sizes->surface_height;
+
+	mode_cmd.pitches[0] = align_pitch(
+			mode_cmd.width * ((sizes->surface_bpp + 7) / 8),
+			mode_cmd.width, sizes->surface_bpp);
+
+	fbdev->ywrap_enabled = priv->has_dmm && ywrap_enabled;
+	if (fbdev->ywrap_enabled) {
+		/* need to align pitch to page size if using DMM scrolling */
+		mode_cmd.pitches[0] = ALIGN(mode_cmd.pitches[0], PAGE_SIZE);
+	}
+
+	/* allocate backing bo */
+	gsize = (union omap_gem_size){
+		.bytes = PAGE_ALIGN(mode_cmd.pitches[0] * mode_cmd.height),
+	};
+	DBG("allocating %d bytes for fb %d", gsize.bytes, dev->primary->index);
+	fbdev->bo = omap_gem_new(dev, gsize, OMAP_BO_SCANOUT | OMAP_BO_WC);
+	if (!fbdev->bo) {
+		dev_err(dev->dev, "failed to allocate buffer object\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	fb = omap_framebuffer_init(dev, &mode_cmd, &fbdev->bo);
+	if (IS_ERR(fb)) {
+		dev_err(dev->dev, "failed to allocate fb\n");
+		/* note: if fb creation failed, we can't rely on fb destroy
+		 * to unref the bo:
+		 */
+		drm_gem_object_unreference(fbdev->bo);
+		ret = PTR_ERR(fb);
+		goto fail;
+	}
+
+	/* note: this keeps the bo pinned.. which is perhaps not ideal,
+	 * but is needed as long as we use fb_mmap() to mmap to userspace
+	 * (since this happens using fix.smem_start).  Possibly we could
+	 * implement our own mmap using GEM mmap support to avoid this
+	 * (non-tiled buffer doesn't need to be pinned for fbcon to write
+	 * to it).  Then we just need to be sure that we are able to re-
+	 * pin it in case of an opps.
+	 */
+	ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
+	if (ret) {
+		dev_err(dev->dev, "could not map (paddr)!\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	mutex_lock(&dev->struct_mutex);
+
+	fbi = framebuffer_alloc(0, dev->dev);
+	if (!fbi) {
+		dev_err(dev->dev, "failed to allocate fb info\n");
+		ret = -ENOMEM;
+		goto fail_unlock;
+	}
+
+	DBG("fbi=%p, dev=%p", fbi, dev);
+
+	fbdev->fb = fb;
+	helper->fb = fb;
+	helper->fbdev = fbi;
+
+	fbi->par = helper;
+	fbi->flags = FBINFO_DEFAULT;
+	fbi->fbops = &omap_fb_ops;
+
+	strcpy(fbi->fix.id, MODULE_NAME);
+
+	ret = fb_alloc_cmap(&fbi->cmap, 256, 0);
+	if (ret) {
+		ret = -ENOMEM;
+		goto fail_unlock;
+	}
+
+	drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->depth);
+	drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height);
+
+	dev->mode_config.fb_base = paddr;
+
+	fbi->screen_base = omap_gem_vaddr(fbdev->bo);
+	fbi->screen_size = fbdev->bo->size;
+	fbi->fix.smem_start = paddr;
+	fbi->fix.smem_len = fbdev->bo->size;
+
+	/* if we have DMM, then we can use it for scrolling by just
+	 * shuffling pages around in DMM rather than doing sw blit.
+	 */
+	if (fbdev->ywrap_enabled) {
+		DRM_INFO("Enabling DMM ywrap scrolling\n");
+		fbi->flags |= FBINFO_HWACCEL_YWRAP | FBINFO_READS_FAST;
+		fbi->fix.ywrapstep = 1;
+	}
+
+
+	DBG("par=%p, %dx%d", fbi->par, fbi->var.xres, fbi->var.yres);
+	DBG("allocated %dx%d fb", fbdev->fb->width, fbdev->fb->height);
+
+	mutex_unlock(&dev->struct_mutex);
+
+	return 0;
+
+fail_unlock:
+	mutex_unlock(&dev->struct_mutex);
+fail:
+
+	if (ret) {
+		if (fbi)
+			framebuffer_release(fbi);
+		if (fb)
+			fb->funcs->destroy(fb);
+	}
+
+	return ret;
+}
+
+static void omap_crtc_fb_gamma_set(struct drm_crtc *crtc,
+		u16 red, u16 green, u16 blue, int regno)
+{
+	DBG("fbdev: set gamma");
+}
+
+static void omap_crtc_fb_gamma_get(struct drm_crtc *crtc,
+		u16 *red, u16 *green, u16 *blue, int regno)
+{
+	DBG("fbdev: get gamma");
+}
+
+static int omap_fbdev_probe(struct drm_fb_helper *helper,
+		struct drm_fb_helper_surface_size *sizes)
+{
+	int new_fb = 0;
+	int ret;
+
+	if (!helper->fb) {
+		ret = omap_fbdev_create(helper, sizes);
+		if (ret)
+			return ret;
+		new_fb = 1;
+	}
+	return new_fb;
+}
+
+static struct drm_fb_helper_funcs omap_fb_helper_funcs = {
+	.gamma_set = omap_crtc_fb_gamma_set,
+	.gamma_get = omap_crtc_fb_gamma_get,
+	.fb_probe = omap_fbdev_probe,
+};
+
+static struct drm_fb_helper *get_fb(struct fb_info *fbi)
+{
+	if (!fbi || strcmp(fbi->fix.id, MODULE_NAME)) {
+		/* these are not the fb's you're looking for */
+		return NULL;
+	}
+	return fbi->par;
+}
+
+/* flush an area of the framebuffer (in case of manual update display that
+ * is not automatically flushed)
+ */
+static void omap_fbdev_flush(struct fb_info *fbi, int x, int y, int w, int h)
+{
+	struct drm_fb_helper *helper = get_fb(fbi);
+
+	if (!helper)
+		return;
+
+	VERB("flush fbdev: %d,%d %dx%d, fbi=%p", x, y, w, h, fbi);
+
+	omap_framebuffer_flush(helper->fb, x, y, w, h);
+}
+
+/* initialize fbdev helper */
+struct drm_fb_helper *omap_fbdev_init(struct drm_device *dev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	struct omap_fbdev *fbdev = NULL;
+	struct drm_fb_helper *helper;
+	int ret = 0;
+
+	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
+	if (!fbdev) {
+		dev_err(dev->dev, "could not allocate fbdev\n");
+		goto fail;
+	}
+
+	INIT_WORK(&fbdev->work, pan_worker);
+
+	helper = &fbdev->base;
+
+	helper->funcs = &omap_fb_helper_funcs;
+
+	ret = drm_fb_helper_init(dev, helper,
+			priv->num_crtcs, priv->num_connectors);
+	if (ret) {
+		dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
+		goto fail;
+	}
+
+	drm_fb_helper_single_add_all_connectors(helper);
+	drm_fb_helper_initial_config(helper, 32);
+
+	priv->fbdev = helper;
+
+	return helper;
+
+fail:
+	kfree(fbdev);
+	return NULL;
+}
+
+void omap_fbdev_free(struct drm_device *dev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	struct drm_fb_helper *helper = priv->fbdev;
+	struct omap_fbdev *fbdev;
+	struct fb_info *fbi;
+
+	DBG();
+
+	fbi = helper->fbdev;
+
+	unregister_framebuffer(fbi);
+	framebuffer_release(fbi);
+
+	drm_fb_helper_fini(helper);
+
+	fbdev = to_omap_fbdev(priv->fbdev);
+
+	/* this will free the backing object */
+	if (fbdev->fb)
+		fbdev->fb->funcs->destroy(fbdev->fb);
+
+	kfree(fbdev);
+
+	priv->fbdev = NULL;
+}
diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c
new file mode 100644
index 00000000..921f058c
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_gem.c
@@ -0,0 +1,1328 @@
+/*
+ * drivers/staging/omapdrm/omap_gem.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <linux/spinlock.h>
+#include <linux/shmem_fs.h>
+
+#include "omap_drv.h"
+#include "omap_dmm_tiler.h"
+
+/* remove these once drm core helpers are merged */
+struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
+void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages,
+		bool dirty, bool accessed);
+int _drm_gem_create_mmap_offset_size(struct drm_gem_object *obj, size_t size);
+
+/*
+ * GEM buffer object implementation.
+ */
+
+#define to_omap_bo(x) container_of(x, struct omap_gem_object, base)
+
+/* note: we use upper 8 bits of flags for driver-internal flags: */
+#define OMAP_BO_DMA			0x01000000	/* actually is physically contiguous */
+#define OMAP_BO_EXT_SYNC	0x02000000	/* externally allocated sync object */
+#define OMAP_BO_EXT_MEM		0x04000000	/* externally allocated memory */
+
+
+struct omap_gem_object {
+	struct drm_gem_object base;
+
+	struct list_head mm_list;
+
+	uint32_t flags;
+
+	/** width/height for tiled formats (rounded up to slot boundaries) */
+	uint16_t width, height;
+
+	/** roll applied when mapping to DMM */
+	uint32_t roll;
+
+	/**
+	 * If buffer is allocated physically contiguous, the OMAP_BO_DMA flag
+	 * is set and the paddr is valid.  Also if the buffer is remapped in
+	 * TILER and paddr_cnt > 0, then paddr is valid.  But if you are using
+	 * the physical address and OMAP_BO_DMA is not set, then you should
+	 * be going thru omap_gem_{get,put}_paddr() to ensure the mapping is
+	 * not removed from under your feet.
+	 *
+	 * Note that OMAP_BO_SCANOUT is a hint from userspace that DMA capable
+	 * buffer is requested, but doesn't mean that it is.  Use the
+	 * OMAP_BO_DMA flag to determine if the buffer has a DMA capable
+	 * physical address.
+	 */
+	dma_addr_t paddr;
+
+	/**
+	 * # of users of paddr
+	 */
+	uint32_t paddr_cnt;
+
+	/**
+	 * tiler block used when buffer is remapped in DMM/TILER.
+	 */
+	struct tiler_block *block;
+
+	/**
+	 * Array of backing pages, if allocated.  Note that pages are never
+	 * allocated for buffers originally allocated from contiguous memory
+	 */
+	struct page **pages;
+
+	/** addresses corresponding to pages in above array */
+	dma_addr_t *addrs;
+
+	/**
+	 * Virtual address, if mapped.
+	 */
+	void *vaddr;
+
+	/**
+	 * sync-object allocated on demand (if needed)
+	 *
+	 * Per-buffer sync-object for tracking pending and completed hw/dma
+	 * read and write operations.  The layout in memory is dictated by
+	 * the SGX firmware, which uses this information to stall the command
+	 * stream if a surface is not ready yet.
+	 *
+	 * Note that when buffer is used by SGX, the sync-object needs to be
+	 * allocated from a special heap of sync-objects.  This way many sync
+	 * objects can be packed in a page, and not waste GPU virtual address
+	 * space.  Because of this we have to have a omap_gem_set_sync_object()
+	 * API to allow replacement of the syncobj after it has (potentially)
+	 * already been allocated.  A bit ugly but I haven't thought of a
+	 * better alternative.
+	 */
+	struct {
+		uint32_t write_pending;
+		uint32_t write_complete;
+		uint32_t read_pending;
+		uint32_t read_complete;
+	} *sync;
+};
+
+static int get_pages(struct drm_gem_object *obj, struct page ***pages);
+static uint64_t mmap_offset(struct drm_gem_object *obj);
+
+/* To deal with userspace mmap'ings of 2d tiled buffers, which (a) are
+ * not necessarily pinned in TILER all the time, and (b) when they are
+ * they are not necessarily page aligned, we reserve one or more small
+ * regions in each of the 2d containers to use as a user-GART where we
+ * can create a second page-aligned mapping of parts of the buffer
+ * being accessed from userspace.
+ *
+ * Note that we could optimize slightly when we know that multiple
+ * tiler containers are backed by the same PAT.. but I'll leave that
+ * for later..
+ */
+#define NUM_USERGART_ENTRIES 2
+struct usergart_entry {
+	struct tiler_block *block;	/* the reserved tiler block */
+	dma_addr_t paddr;
+	struct drm_gem_object *obj;	/* the current pinned obj */
+	pgoff_t obj_pgoff;		/* page offset of obj currently
+					   mapped in */
+};
+static struct {
+	struct usergart_entry entry[NUM_USERGART_ENTRIES];
+	int height;				/* height in rows */
+	int height_shift;		/* ilog2(height in rows) */
+	int slot_shift;			/* ilog2(width per slot) */
+	int stride_pfn;			/* stride in pages */
+	int last;				/* index of last used entry */
+} *usergart;
+
+static void evict_entry(struct drm_gem_object *obj,
+		enum tiler_fmt fmt, struct usergart_entry *entry)
+{
+	if (obj->dev->dev_mapping) {
+		struct omap_gem_object *omap_obj = to_omap_bo(obj);
+		int n = usergart[fmt].height;
+		size_t size = PAGE_SIZE * n;
+		loff_t off = mmap_offset(obj) +
+				(entry->obj_pgoff << PAGE_SHIFT);
+		const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE);
+		if (m > 1) {
+			int i;
+			/* if stride > than PAGE_SIZE then sparse mapping: */
+			for (i = n; i > 0; i--) {
+				unmap_mapping_range(obj->dev->dev_mapping,
+						off, PAGE_SIZE, 1);
+				off += PAGE_SIZE * m;
+			}
+		} else {
+			unmap_mapping_range(obj->dev->dev_mapping, off, size, 1);
+		}
+	}
+
+	entry->obj = NULL;
+}
+
+/* Evict a buffer from usergart, if it is mapped there */
+static void evict(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+
+	if (omap_obj->flags & OMAP_BO_TILED) {
+		enum tiler_fmt fmt = gem2fmt(omap_obj->flags);
+		int i;
+
+		if (!usergart)
+			return;
+
+		for (i = 0; i < NUM_USERGART_ENTRIES; i++) {
+			struct usergart_entry *entry = &usergart[fmt].entry[i];
+			if (entry->obj == obj)
+				evict_entry(obj, fmt, entry);
+		}
+	}
+}
+
+/* GEM objects can either be allocated from contiguous memory (in which
+ * case obj->filp==NULL), or w/ shmem backing (obj->filp!=NULL).  But non
+ * contiguous buffers can be remapped in TILER/DMM if they need to be
+ * contiguous... but we don't do this all the time to reduce pressure
+ * on TILER/DMM space when we know at allocation time that the buffer
+ * will need to be scanned out.
+ */
+static inline bool is_shmem(struct drm_gem_object *obj)
+{
+	return obj->filp != NULL;
+}
+
+static DEFINE_SPINLOCK(sync_lock);
+
+/** ensure backing pages are allocated */
+static int omap_gem_attach_pages(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	struct page **pages;
+
+	WARN_ON(omap_obj->pages);
+
+	/* TODO: __GFP_DMA32 .. but somehow GFP_HIGHMEM is coming from the
+	 * mapping_gfp_mask(mapping) which conflicts w/ GFP_DMA32.. probably
+	 * we actually want CMA memory for it all anyways..
+	 */
+	pages = _drm_gem_get_pages(obj, GFP_KERNEL);
+	if (IS_ERR(pages)) {
+		dev_err(obj->dev->dev, "could not get pages: %ld\n", PTR_ERR(pages));
+		return PTR_ERR(pages);
+	}
+
+	/* for non-cached buffers, ensure the new pages are clean because
+	 * DSS, GPU, etc. are not cache coherent:
+	 */
+	if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) {
+		int i, npages = obj->size >> PAGE_SHIFT;
+		dma_addr_t *addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL);
+		for (i = 0; i < npages; i++) {
+			addrs[i] = dma_map_page(obj->dev->dev, pages[i],
+					0, PAGE_SIZE, DMA_BIDIRECTIONAL);
+		}
+		omap_obj->addrs = addrs;
+	}
+
+	omap_obj->pages = pages;
+	return 0;
+}
+
+/** release backing pages */
+static void omap_gem_detach_pages(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+
+	/* for non-cached buffers, ensure the new pages are clean because
+	 * DSS, GPU, etc. are not cache coherent:
+	 */
+	if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) {
+		int i, npages = obj->size >> PAGE_SHIFT;
+		for (i = 0; i < npages; i++) {
+			dma_unmap_page(obj->dev->dev, omap_obj->addrs[i],
+					PAGE_SIZE, DMA_BIDIRECTIONAL);
+		}
+		kfree(omap_obj->addrs);
+		omap_obj->addrs = NULL;
+	}
+
+	_drm_gem_put_pages(obj, omap_obj->pages, true, false);
+	omap_obj->pages = NULL;
+}
+
+/** get mmap offset */
+static uint64_t mmap_offset(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	if (!obj->map_list.map) {
+		/* Make it mmapable */
+		size_t size = omap_gem_mmap_size(obj);
+		int ret = _drm_gem_create_mmap_offset_size(obj, size);
+
+		if (ret) {
+			dev_err(dev->dev, "could not allocate mmap offset\n");
+			return 0;
+		}
+	}
+
+	return (uint64_t)obj->map_list.hash.key << PAGE_SHIFT;
+}
+
+uint64_t omap_gem_mmap_offset(struct drm_gem_object *obj)
+{
+	uint64_t offset;
+	mutex_lock(&obj->dev->struct_mutex);
+	offset = mmap_offset(obj);
+	mutex_unlock(&obj->dev->struct_mutex);
+	return offset;
+}
+
+/** get mmap size */
+size_t omap_gem_mmap_size(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	size_t size = obj->size;
+
+	if (omap_obj->flags & OMAP_BO_TILED) {
+		/* for tiled buffers, the virtual size has stride rounded up
+		 * to 4kb.. (to hide the fact that row n+1 might start 16kb or
+		 * 32kb later!).  But we don't back the entire buffer with
+		 * pages, only the valid picture part.. so need to adjust for
+		 * this in the size used to mmap and generate mmap offset
+		 */
+		size = tiler_vsize(gem2fmt(omap_obj->flags),
+				omap_obj->width, omap_obj->height);
+	}
+
+	return size;
+}
+
+
+/* Normal handling for the case of faulting in non-tiled buffers */
+static int fault_1d(struct drm_gem_object *obj,
+		struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	unsigned long pfn;
+	pgoff_t pgoff;
+
+	/* We don't use vmf->pgoff since that has the fake offset: */
+	pgoff = ((unsigned long)vmf->virtual_address -
+			vma->vm_start) >> PAGE_SHIFT;
+
+	if (omap_obj->pages) {
+		pfn = page_to_pfn(omap_obj->pages[pgoff]);
+	} else {
+		BUG_ON(!(omap_obj->flags & OMAP_BO_DMA));
+		pfn = (omap_obj->paddr >> PAGE_SHIFT) + pgoff;
+	}
+
+	VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address,
+			pfn, pfn << PAGE_SHIFT);
+
+	return vm_insert_mixed(vma, (unsigned long)vmf->virtual_address, pfn);
+}
+
+/* Special handling for the case of faulting in 2d tiled buffers */
+static int fault_2d(struct drm_gem_object *obj,
+		struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	struct usergart_entry *entry;
+	enum tiler_fmt fmt = gem2fmt(omap_obj->flags);
+	struct page *pages[64];  /* XXX is this too much to have on stack? */
+	unsigned long pfn;
+	pgoff_t pgoff, base_pgoff;
+	void __user *vaddr;
+	int i, ret, slots;
+
+	/*
+	 * Note the height of the slot is also equal to the number of pages
+	 * that need to be mapped in to fill 4kb wide CPU page.  If the slot
+	 * height is 64, then 64 pages fill a 4kb wide by 64 row region.
+	 */
+	const int n = usergart[fmt].height;
+	const int n_shift = usergart[fmt].height_shift;
+
+	/*
+	 * If buffer width in bytes > PAGE_SIZE then the virtual stride is
+	 * rounded up to next multiple of PAGE_SIZE.. this need to be taken
+	 * into account in some of the math, so figure out virtual stride
+	 * in pages
+	 */
+	const int m = 1 + ((omap_obj->width << fmt) / PAGE_SIZE);
+
+	/* We don't use vmf->pgoff since that has the fake offset: */
+	pgoff = ((unsigned long)vmf->virtual_address -
+			vma->vm_start) >> PAGE_SHIFT;
+
+	/*
+	 * Actual address we start mapping at is rounded down to previous slot
+	 * boundary in the y direction:
+	 */
+	base_pgoff = round_down(pgoff, m << n_shift);
+
+	/* figure out buffer width in slots */
+	slots = omap_obj->width >> usergart[fmt].slot_shift;
+
+	vaddr = vmf->virtual_address - ((pgoff - base_pgoff) << PAGE_SHIFT);
+
+	entry = &usergart[fmt].entry[usergart[fmt].last];
+
+	/* evict previous buffer using this usergart entry, if any: */
+	if (entry->obj)
+		evict_entry(entry->obj, fmt, entry);
+
+	entry->obj = obj;
+	entry->obj_pgoff = base_pgoff;
+
+	/* now convert base_pgoff to phys offset from virt offset: */
+	base_pgoff = (base_pgoff >> n_shift) * slots;
+
+	/* for wider-than 4k.. figure out which part of the slot-row we want: */
+	if (m > 1) {
+		int off = pgoff % m;
+		entry->obj_pgoff += off;
+		base_pgoff /= m;
+		slots = min(slots - (off << n_shift), n);
+		base_pgoff += off << n_shift;
+		vaddr += off << PAGE_SHIFT;
+	}
+
+	/*
+	 * Map in pages. Beyond the valid pixel part of the buffer, we set
+	 * pages[i] to NULL to get a dummy page mapped in.. if someone
+	 * reads/writes it they will get random/undefined content, but at
+	 * least it won't be corrupting whatever other random page used to
+	 * be mapped in, or other undefined behavior.
+	 */
+	memcpy(pages, &omap_obj->pages[base_pgoff],
+			sizeof(struct page *) * slots);
+	memset(pages + slots, 0,
+			sizeof(struct page *) * (n - slots));
+
+	ret = tiler_pin(entry->block, pages, ARRAY_SIZE(pages), 0, true);
+	if (ret) {
+		dev_err(obj->dev->dev, "failed to pin: %d\n", ret);
+		return ret;
+	}
+
+	pfn = entry->paddr >> PAGE_SHIFT;
+
+	VERB("Inserting %p pfn %lx, pa %lx", vmf->virtual_address,
+			pfn, pfn << PAGE_SHIFT);
+
+	for (i = n; i > 0; i--) {
+		vm_insert_mixed(vma, (unsigned long)vaddr, pfn);
+		pfn += usergart[fmt].stride_pfn;
+		vaddr += PAGE_SIZE * m;
+	}
+
+	/* simple round-robin: */
+	usergart[fmt].last = (usergart[fmt].last + 1) % NUM_USERGART_ENTRIES;
+
+	return 0;
+}
+
+/**
+ * omap_gem_fault		-	pagefault handler for GEM objects
+ * @vma: the VMA of the GEM object
+ * @vmf: fault detail
+ *
+ * Invoked when a fault occurs on an mmap of a GEM managed area. GEM
+ * does most of the work for us including the actual map/unmap calls
+ * but we need to do the actual page work.
+ *
+ * The VMA was set up by GEM. In doing so it also ensured that the
+ * vma->vm_private_data points to the GEM object that is backing this
+ * mapping.
+ */
+int omap_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct drm_gem_object *obj = vma->vm_private_data;
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	struct drm_device *dev = obj->dev;
+	struct page **pages;
+	int ret;
+
+	/* Make sure we don't parallel update on a fault, nor move or remove
+	 * something from beneath our feet
+	 */
+	mutex_lock(&dev->struct_mutex);
+
+	/* if a shmem backed object, make sure we have pages attached now */
+	ret = get_pages(obj, &pages);
+	if (ret) {
+		goto fail;
+	}
+
+	/* where should we do corresponding put_pages().. we are mapping
+	 * the original page, rather than thru a GART, so we can't rely
+	 * on eviction to trigger this.  But munmap() or all mappings should
+	 * probably trigger put_pages()?
+	 */
+
+	if (omap_obj->flags & OMAP_BO_TILED)
+		ret = fault_2d(obj, vma, vmf);
+	else
+		ret = fault_1d(obj, vma, vmf);
+
+
+fail:
+	mutex_unlock(&dev->struct_mutex);
+	switch (ret) {
+	case 0:
+	case -ERESTARTSYS:
+	case -EINTR:
+		return VM_FAULT_NOPAGE;
+	case -ENOMEM:
+		return VM_FAULT_OOM;
+	default:
+		return VM_FAULT_SIGBUS;
+	}
+}
+
+/** We override mainly to fix up some of the vm mapping flags.. */
+int omap_gem_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct omap_gem_object *omap_obj;
+	int ret;
+
+	ret = drm_gem_mmap(filp, vma);
+	if (ret) {
+		DBG("mmap failed: %d", ret);
+		return ret;
+	}
+
+	/* after drm_gem_mmap(), it is safe to access the obj */
+	omap_obj = to_omap_bo(vma->vm_private_data);
+
+	vma->vm_flags &= ~VM_PFNMAP;
+	vma->vm_flags |= VM_MIXEDMAP;
+
+	if (omap_obj->flags & OMAP_BO_WC) {
+		vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
+	} else if (omap_obj->flags & OMAP_BO_UNCACHED) {
+		vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags));
+	} else {
+		vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
+	}
+
+	return ret;
+}
+
+/**
+ * omap_gem_dumb_create	-	create a dumb buffer
+ * @drm_file: our client file
+ * @dev: our device
+ * @args: the requested arguments copied from userspace
+ *
+ * Allocate a buffer suitable for use for a frame buffer of the
+ * form described by user space. Give userspace a handle by which
+ * to reference it.
+ */
+int omap_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+		struct drm_mode_create_dumb *args)
+{
+	union omap_gem_size gsize;
+
+	/* in case someone tries to feed us a completely bogus stride: */
+	args->pitch = align_pitch(args->pitch, args->width, args->bpp);
+	args->size = PAGE_ALIGN(args->pitch * args->height);
+
+	gsize = (union omap_gem_size){
+		.bytes = args->size,
+	};
+
+	return omap_gem_new_handle(dev, file, gsize,
+			OMAP_BO_SCANOUT | OMAP_BO_WC, &args->handle);
+}
+
+/**
+ * omap_gem_dumb_destroy	-	destroy a dumb buffer
+ * @file: client file
+ * @dev: our DRM device
+ * @handle: the object handle
+ *
+ * Destroy a handle that was created via omap_gem_dumb_create.
+ */
+int omap_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+		uint32_t handle)
+{
+	/* No special work needed, drop the reference and see what falls out */
+	return drm_gem_handle_delete(file, handle);
+}
+
+/**
+ * omap_gem_dumb_map	-	buffer mapping for dumb interface
+ * @file: our drm client file
+ * @dev: drm device
+ * @handle: GEM handle to the object (from dumb_create)
+ *
+ * Do the necessary setup to allow the mapping of the frame buffer
+ * into user memory. We don't have to do much here at the moment.
+ */
+int omap_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
+		uint32_t handle, uint64_t *offset)
+{
+	struct drm_gem_object *obj;
+	int ret = 0;
+
+	/* GEM does all our handle to object mapping */
+	obj = drm_gem_object_lookup(dev, file, handle);
+	if (obj == NULL) {
+		ret = -ENOENT;
+		goto fail;
+	}
+
+	*offset = omap_gem_mmap_offset(obj);
+
+	drm_gem_object_unreference_unlocked(obj);
+
+fail:
+	return ret;
+}
+
+/* Set scrolling position.  This allows us to implement fast scrolling
+ * for console.
+ *
+ * Call only from non-atomic contexts.
+ */
+int omap_gem_roll(struct drm_gem_object *obj, uint32_t roll)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	uint32_t npages = obj->size >> PAGE_SHIFT;
+	int ret = 0;
+
+	if (roll > npages) {
+		dev_err(obj->dev->dev, "invalid roll: %d\n", roll);
+		return -EINVAL;
+	}
+
+	omap_obj->roll = roll;
+
+	mutex_lock(&obj->dev->struct_mutex);
+
+	/* if we aren't mapped yet, we don't need to do anything */
+	if (omap_obj->block) {
+		struct page **pages;
+		ret = get_pages(obj, &pages);
+		if (ret)
+			goto fail;
+		ret = tiler_pin(omap_obj->block, pages, npages, roll, true);
+		if (ret)
+			dev_err(obj->dev->dev, "could not repin: %d\n", ret);
+	}
+
+fail:
+	mutex_unlock(&obj->dev->struct_mutex);
+
+	return ret;
+}
+
+/* Get physical address for DMA.. if 'remap' is true, and the buffer is not
+ * already contiguous, remap it to pin in physically contiguous memory.. (ie.
+ * map in TILER)
+ */
+int omap_gem_get_paddr(struct drm_gem_object *obj,
+		dma_addr_t *paddr, bool remap)
+{
+	struct omap_drm_private *priv = obj->dev->dev_private;
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	int ret = 0;
+
+	mutex_lock(&obj->dev->struct_mutex);
+
+	if (remap && is_shmem(obj) && priv->has_dmm) {
+		if (omap_obj->paddr_cnt == 0) {
+			struct page **pages;
+			uint32_t npages = obj->size >> PAGE_SHIFT;
+			enum tiler_fmt fmt = gem2fmt(omap_obj->flags);
+			struct tiler_block *block;
+
+			BUG_ON(omap_obj->block);
+
+			ret = get_pages(obj, &pages);
+			if (ret)
+				goto fail;
+
+			if (omap_obj->flags & OMAP_BO_TILED) {
+				block = tiler_reserve_2d(fmt,
+						omap_obj->width,
+						omap_obj->height, 0);
+			} else {
+				block = tiler_reserve_1d(obj->size);
+			}
+
+			if (IS_ERR(block)) {
+				ret = PTR_ERR(block);
+				dev_err(obj->dev->dev,
+					"could not remap: %d (%d)\n", ret, fmt);
+				goto fail;
+			}
+
+			/* TODO: enable async refill.. */
+			ret = tiler_pin(block, pages, npages,
+					omap_obj->roll, true);
+			if (ret) {
+				tiler_release(block);
+				dev_err(obj->dev->dev,
+						"could not pin: %d\n", ret);
+				goto fail;
+			}
+
+			omap_obj->paddr = tiler_ssptr(block);
+			omap_obj->block = block;
+
+			DBG("got paddr: %08x", omap_obj->paddr);
+		}
+
+		omap_obj->paddr_cnt++;
+
+		*paddr = omap_obj->paddr;
+	} else if (omap_obj->flags & OMAP_BO_DMA) {
+		*paddr = omap_obj->paddr;
+	} else {
+		ret = -EINVAL;
+	}
+
+fail:
+	mutex_unlock(&obj->dev->struct_mutex);
+
+	return ret;
+}
+
+/* Release physical address, when DMA is no longer being performed.. this
+ * could potentially unpin and unmap buffers from TILER
+ */
+int omap_gem_put_paddr(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	int ret = 0;
+
+	mutex_lock(&obj->dev->struct_mutex);
+	if (omap_obj->paddr_cnt > 0) {
+		omap_obj->paddr_cnt--;
+		if (omap_obj->paddr_cnt == 0) {
+			ret = tiler_unpin(omap_obj->block);
+			if (ret) {
+				dev_err(obj->dev->dev,
+					"could not unpin pages: %d\n", ret);
+				goto fail;
+			}
+			ret = tiler_release(omap_obj->block);
+			if (ret) {
+				dev_err(obj->dev->dev,
+					"could not release unmap: %d\n", ret);
+			}
+			omap_obj->block = NULL;
+		}
+	}
+fail:
+	mutex_unlock(&obj->dev->struct_mutex);
+	return ret;
+}
+
+/* acquire pages when needed (for example, for DMA where physically
+ * contiguous buffer is not required
+ */
+static int get_pages(struct drm_gem_object *obj, struct page ***pages)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	int ret = 0;
+
+	if (is_shmem(obj) && !omap_obj->pages) {
+		ret = omap_gem_attach_pages(obj);
+		if (ret) {
+			dev_err(obj->dev->dev, "could not attach pages\n");
+			return ret;
+		}
+	}
+
+	/* TODO: even phys-contig.. we should have a list of pages? */
+	*pages = omap_obj->pages;
+
+	return 0;
+}
+
+int omap_gem_get_pages(struct drm_gem_object *obj, struct page ***pages)
+{
+	int ret;
+	mutex_lock(&obj->dev->struct_mutex);
+	ret = get_pages(obj, pages);
+	mutex_unlock(&obj->dev->struct_mutex);
+	return ret;
+}
+
+/* release pages when DMA no longer being performed */
+int omap_gem_put_pages(struct drm_gem_object *obj)
+{
+	/* do something here if we dynamically attach/detach pages.. at
+	 * least they would no longer need to be pinned if everyone has
+	 * released the pages..
+	 */
+	return 0;
+}
+
+/* Get kernel virtual address for CPU access.. this more or less only
+ * exists for omap_fbdev.  This should be called with struct_mutex
+ * held.
+ */
+void *omap_gem_vaddr(struct drm_gem_object *obj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	WARN_ON(! mutex_is_locked(&obj->dev->struct_mutex));
+	if (!omap_obj->vaddr) {
+		struct page **pages;
+		int ret = get_pages(obj, &pages);
+		if (ret)
+			return ERR_PTR(ret);
+		omap_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT,
+				VM_MAP, pgprot_writecombine(PAGE_KERNEL));
+	}
+	return omap_obj->vaddr;
+}
+
+#ifdef CONFIG_DEBUG_FS
+void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m)
+{
+	struct drm_device *dev = obj->dev;
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	uint64_t off = 0;
+
+	WARN_ON(! mutex_is_locked(&dev->struct_mutex));
+
+	if (obj->map_list.map)
+		off = (uint64_t)obj->map_list.hash.key;
+
+	seq_printf(m, "%08x: %2d (%2d) %08llx %08Zx (%2d) %p %4d",
+			omap_obj->flags, obj->name, obj->refcount.refcount.counter,
+			off, omap_obj->paddr, omap_obj->paddr_cnt,
+			omap_obj->vaddr, omap_obj->roll);
+
+	if (omap_obj->flags & OMAP_BO_TILED) {
+		seq_printf(m, " %dx%d", omap_obj->width, omap_obj->height);
+		if (omap_obj->block) {
+			struct tcm_area *area = &omap_obj->block->area;
+			seq_printf(m, " (%dx%d, %dx%d)",
+					area->p0.x, area->p0.y,
+					area->p1.x, area->p1.y);
+		}
+	} else {
+		seq_printf(m, " %d", obj->size);
+	}
+
+	seq_printf(m, "\n");
+}
+
+void omap_gem_describe_objects(struct list_head *list, struct seq_file *m)
+{
+	struct omap_gem_object *omap_obj;
+	int count = 0;
+	size_t size = 0;
+
+	list_for_each_entry(omap_obj, list, mm_list) {
+		struct drm_gem_object *obj = &omap_obj->base;
+		seq_printf(m, "   ");
+		omap_gem_describe(obj, m);
+		count++;
+		size += obj->size;
+	}
+
+	seq_printf(m, "Total %d objects, %zu bytes\n", count, size);
+}
+#endif
+
+/* Buffer Synchronization:
+ */
+
+struct omap_gem_sync_waiter {
+	struct list_head list;
+	struct omap_gem_object *omap_obj;
+	enum omap_gem_op op;
+	uint32_t read_target, write_target;
+	/* notify called w/ sync_lock held */
+	void (*notify)(void *arg);
+	void *arg;
+};
+
+/* list of omap_gem_sync_waiter.. the notify fxn gets called back when
+ * the read and/or write target count is achieved which can call a user
+ * callback (ex. to kick 3d and/or 2d), wakeup blocked task (prep for
+ * cpu access), etc.
+ */
+static LIST_HEAD(waiters);
+
+static inline bool is_waiting(struct omap_gem_sync_waiter *waiter)
+{
+	struct omap_gem_object *omap_obj = waiter->omap_obj;
+	if ((waiter->op & OMAP_GEM_READ) &&
+			(omap_obj->sync->read_complete < waiter->read_target))
+		return true;
+	if ((waiter->op & OMAP_GEM_WRITE) &&
+			(omap_obj->sync->write_complete < waiter->write_target))
+		return true;
+	return false;
+}
+
+/* macro for sync debug.. */
+#define SYNCDBG 0
+#define SYNC(fmt, ...) do { if (SYNCDBG) \
+		printk(KERN_ERR "%s:%d: "fmt"\n", \
+				__func__, __LINE__, ##__VA_ARGS__); \
+	} while (0)
+
+
+static void sync_op_update(void)
+{
+	struct omap_gem_sync_waiter *waiter, *n;
+	list_for_each_entry_safe(waiter, n, &waiters, list) {
+		if (!is_waiting(waiter)) {
+			list_del(&waiter->list);
+			SYNC("notify: %p", waiter);
+			waiter->notify(waiter->arg);
+			kfree(waiter);
+		}
+	}
+}
+
+static inline int sync_op(struct drm_gem_object *obj,
+		enum omap_gem_op op, bool start)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	int ret = 0;
+
+	spin_lock(&sync_lock);
+
+	if (!omap_obj->sync) {
+		omap_obj->sync = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC);
+		if (!omap_obj->sync) {
+			ret = -ENOMEM;
+			goto unlock;
+		}
+	}
+
+	if (start) {
+		if (op & OMAP_GEM_READ)
+			omap_obj->sync->read_pending++;
+		if (op & OMAP_GEM_WRITE)
+			omap_obj->sync->write_pending++;
+	} else {
+		if (op & OMAP_GEM_READ)
+			omap_obj->sync->read_complete++;
+		if (op & OMAP_GEM_WRITE)
+			omap_obj->sync->write_complete++;
+		sync_op_update();
+	}
+
+unlock:
+	spin_unlock(&sync_lock);
+
+	return ret;
+}
+
+/* it is a bit lame to handle updates in this sort of polling way, but
+ * in case of PVR, the GPU can directly update read/write complete
+ * values, and not really tell us which ones it updated.. this also
+ * means that sync_lock is not quite sufficient.  So we'll need to
+ * do something a bit better when it comes time to add support for
+ * separate 2d hw..
+ */
+void omap_gem_op_update(void)
+{
+	spin_lock(&sync_lock);
+	sync_op_update();
+	spin_unlock(&sync_lock);
+}
+
+/* mark the start of read and/or write operation */
+int omap_gem_op_start(struct drm_gem_object *obj, enum omap_gem_op op)
+{
+	return sync_op(obj, op, true);
+}
+
+int omap_gem_op_finish(struct drm_gem_object *obj, enum omap_gem_op op)
+{
+	return sync_op(obj, op, false);
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(sync_event);
+
+static void sync_notify(void *arg)
+{
+	struct task_struct **waiter_task = arg;
+	*waiter_task = NULL;
+	wake_up_all(&sync_event);
+}
+
+int omap_gem_op_sync(struct drm_gem_object *obj, enum omap_gem_op op)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	int ret = 0;
+	if (omap_obj->sync) {
+		struct task_struct *waiter_task = current;
+		struct omap_gem_sync_waiter *waiter =
+				kzalloc(sizeof(*waiter), GFP_KERNEL);
+
+		if (!waiter) {
+			return -ENOMEM;
+		}
+
+		waiter->omap_obj = omap_obj;
+		waiter->op = op;
+		waiter->read_target = omap_obj->sync->read_pending;
+		waiter->write_target = omap_obj->sync->write_pending;
+		waiter->notify = sync_notify;
+		waiter->arg = &waiter_task;
+
+		spin_lock(&sync_lock);
+		if (is_waiting(waiter)) {
+			SYNC("waited: %p", waiter);
+			list_add_tail(&waiter->list, &waiters);
+			spin_unlock(&sync_lock);
+			ret = wait_event_interruptible(sync_event,
+					(waiter_task == NULL));
+			spin_lock(&sync_lock);
+			if (waiter_task) {
+				SYNC("interrupted: %p", waiter);
+				/* we were interrupted */
+				list_del(&waiter->list);
+				waiter_task = NULL;
+			} else {
+				/* freed in sync_op_update() */
+				waiter = NULL;
+			}
+		}
+		spin_unlock(&sync_lock);
+
+		if (waiter) {
+			kfree(waiter);
+		}
+	}
+	return ret;
+}
+
+/* call fxn(arg), either synchronously or asynchronously if the op
+ * is currently blocked..  fxn() can be called from any context
+ *
+ * (TODO for now fxn is called back from whichever context calls
+ * omap_gem_op_update().. but this could be better defined later
+ * if needed)
+ *
+ * TODO more code in common w/ _sync()..
+ */
+int omap_gem_op_async(struct drm_gem_object *obj, enum omap_gem_op op,
+		void (*fxn)(void *arg), void *arg)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	if (omap_obj->sync) {
+		struct omap_gem_sync_waiter *waiter =
+				kzalloc(sizeof(*waiter), GFP_ATOMIC);
+
+		if (!waiter) {
+			return -ENOMEM;
+		}
+
+		waiter->omap_obj = omap_obj;
+		waiter->op = op;
+		waiter->read_target = omap_obj->sync->read_pending;
+		waiter->write_target = omap_obj->sync->write_pending;
+		waiter->notify = fxn;
+		waiter->arg = arg;
+
+		spin_lock(&sync_lock);
+		if (is_waiting(waiter)) {
+			SYNC("waited: %p", waiter);
+			list_add_tail(&waiter->list, &waiters);
+			spin_unlock(&sync_lock);
+			return 0;
+		}
+
+		spin_unlock(&sync_lock);
+	}
+
+	/* no waiting.. */
+	fxn(arg);
+
+	return 0;
+}
+
+/* special API so PVR can update the buffer to use a sync-object allocated
+ * from it's sync-obj heap.  Only used for a newly allocated (from PVR's
+ * perspective) sync-object, so we overwrite the new syncobj w/ values
+ * from the already allocated syncobj (if there is one)
+ */
+int omap_gem_set_sync_object(struct drm_gem_object *obj, void *syncobj)
+{
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+	int ret = 0;
+
+	spin_lock(&sync_lock);
+
+	if ((omap_obj->flags & OMAP_BO_EXT_SYNC) && !syncobj) {
+		/* clearing a previously set syncobj */
+		syncobj = kzalloc(sizeof(*omap_obj->sync), GFP_ATOMIC);
+		if (!syncobj) {
+			ret = -ENOMEM;
+			goto unlock;
+		}
+		memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync));
+		omap_obj->flags &= ~OMAP_BO_EXT_SYNC;
+		omap_obj->sync = syncobj;
+	} else if (syncobj && !(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
+		/* replacing an existing syncobj */
+		if (omap_obj->sync) {
+			memcpy(syncobj, omap_obj->sync, sizeof(*omap_obj->sync));
+			kfree(omap_obj->sync);
+		}
+		omap_obj->flags |= OMAP_BO_EXT_SYNC;
+		omap_obj->sync = syncobj;
+	}
+
+unlock:
+	spin_unlock(&sync_lock);
+	return ret;
+}
+
+int omap_gem_init_object(struct drm_gem_object *obj)
+{
+	return -EINVAL;          /* unused */
+}
+
+/* don't call directly.. called from GEM core when it is time to actually
+ * free the object..
+ */
+void omap_gem_free_object(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct omap_gem_object *omap_obj = to_omap_bo(obj);
+
+	evict(obj);
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	list_del(&omap_obj->mm_list);
+
+	if (obj->map_list.map) {
+		drm_gem_free_mmap_offset(obj);
+	}
+
+	/* this means the object is still pinned.. which really should
+	 * not happen.  I think..
+	 */
+	WARN_ON(omap_obj->paddr_cnt > 0);
+
+	/* don't free externally allocated backing memory */
+	if (!(omap_obj->flags & OMAP_BO_EXT_MEM)) {
+		if (omap_obj->pages) {
+			omap_gem_detach_pages(obj);
+		}
+		if (!is_shmem(obj)) {
+			dma_free_writecombine(dev->dev, obj->size,
+					omap_obj->vaddr, omap_obj->paddr);
+		} else if (omap_obj->vaddr) {
+			vunmap(omap_obj->vaddr);
+		}
+	}
+
+	/* don't free externally allocated syncobj */
+	if (!(omap_obj->flags & OMAP_BO_EXT_SYNC)) {
+		kfree(omap_obj->sync);
+	}
+
+	drm_gem_object_release(obj);
+
+	kfree(obj);
+}
+
+/* convenience method to construct a GEM buffer object, and userspace handle */
+int omap_gem_new_handle(struct drm_device *dev, struct drm_file *file,
+		union omap_gem_size gsize, uint32_t flags, uint32_t *handle)
+{
+	struct drm_gem_object *obj;
+	int ret;
+
+	obj = omap_gem_new(dev, gsize, flags);
+	if (!obj)
+		return -ENOMEM;
+
+	ret = drm_gem_handle_create(file, obj, handle);
+	if (ret) {
+		drm_gem_object_release(obj);
+		kfree(obj); /* TODO isn't there a dtor to call? just copying i915 */
+		return ret;
+	}
+
+	/* drop reference from allocate - handle holds it now */
+	drm_gem_object_unreference_unlocked(obj);
+
+	return 0;
+}
+
+/* GEM buffer object constructor */
+struct drm_gem_object *omap_gem_new(struct drm_device *dev,
+		union omap_gem_size gsize, uint32_t flags)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	struct omap_gem_object *omap_obj;
+	struct drm_gem_object *obj = NULL;
+	size_t size;
+	int ret;
+
+	if (flags & OMAP_BO_TILED) {
+		if (!usergart) {
+			dev_err(dev->dev, "Tiled buffers require DMM\n");
+			goto fail;
+		}
+
+		/* tiled buffers are always shmem paged backed.. when they are
+		 * scanned out, they are remapped into DMM/TILER
+		 */
+		flags &= ~OMAP_BO_SCANOUT;
+
+		/* currently don't allow cached buffers.. there is some caching
+		 * stuff that needs to be handled better
+		 */
+		flags &= ~(OMAP_BO_CACHED|OMAP_BO_UNCACHED);
+		flags |= OMAP_BO_WC;
+
+		/* align dimensions to slot boundaries... */
+		tiler_align(gem2fmt(flags),
+				&gsize.tiled.width, &gsize.tiled.height);
+
+		/* ...and calculate size based on aligned dimensions */
+		size = tiler_size(gem2fmt(flags),
+				gsize.tiled.width, gsize.tiled.height);
+	} else {
+		size = PAGE_ALIGN(gsize.bytes);
+	}
+
+	omap_obj = kzalloc(sizeof(*omap_obj), GFP_KERNEL);
+	if (!omap_obj) {
+		dev_err(dev->dev, "could not allocate GEM object\n");
+		goto fail;
+	}
+
+	list_add(&omap_obj->mm_list, &priv->obj_list);
+
+	obj = &omap_obj->base;
+
+	if ((flags & OMAP_BO_SCANOUT) && !priv->has_dmm) {
+		/* attempt to allocate contiguous memory if we don't
+		 * have DMM for remappign discontiguous buffers
+		 */
+		omap_obj->vaddr =  dma_alloc_writecombine(dev->dev, size,
+				&omap_obj->paddr, GFP_KERNEL);
+		if (omap_obj->vaddr) {
+			flags |= OMAP_BO_DMA;
+		}
+	}
+
+	omap_obj->flags = flags;
+
+	if (flags & OMAP_BO_TILED) {
+		omap_obj->width = gsize.tiled.width;
+		omap_obj->height = gsize.tiled.height;
+	}
+
+	if (flags & (OMAP_BO_DMA|OMAP_BO_EXT_MEM)) {
+		ret = drm_gem_private_object_init(dev, obj, size);
+	} else {
+		ret = drm_gem_object_init(dev, obj, size);
+	}
+
+	if (ret) {
+		goto fail;
+	}
+
+	return obj;
+
+fail:
+	if (obj) {
+		omap_gem_free_object(obj);
+	}
+	return NULL;
+}
+
+/* init/cleanup.. if DMM is used, we need to set some stuff up.. */
+void omap_gem_init(struct drm_device *dev)
+{
+	struct omap_drm_private *priv = dev->dev_private;
+	const enum tiler_fmt fmts[] = {
+			TILFMT_8BIT, TILFMT_16BIT, TILFMT_32BIT
+	};
+	int i, j;
+
+	if (!dmm_is_initialized()) {
+		/* DMM only supported on OMAP4 and later, so this isn't fatal */
+		dev_warn(dev->dev, "DMM not available, disable DMM support\n");
+		return;
+	}
+
+	usergart = kzalloc(3 * sizeof(*usergart), GFP_KERNEL);
+	if (!usergart) {
+		dev_warn(dev->dev, "could not allocate usergart\n");
+		return;
+	}
+
+	/* reserve 4k aligned/wide regions for userspace mappings: */
+	for (i = 0; i < ARRAY_SIZE(fmts); i++) {
+		uint16_t h = 1, w = PAGE_SIZE >> i;
+		tiler_align(fmts[i], &w, &h);
+		/* note: since each region is 1 4kb page wide, and minimum
+		 * number of rows, the height ends up being the same as the
+		 * # of pages in the region
+		 */
+		usergart[i].height = h;
+		usergart[i].height_shift = ilog2(h);
+		usergart[i].stride_pfn = tiler_stride(fmts[i]) >> PAGE_SHIFT;
+		usergart[i].slot_shift = ilog2((PAGE_SIZE / h) >> i);
+		for (j = 0; j < NUM_USERGART_ENTRIES; j++) {
+			struct usergart_entry *entry = &usergart[i].entry[j];
+			struct tiler_block *block =
+					tiler_reserve_2d(fmts[i], w, h,
+							PAGE_SIZE);
+			if (IS_ERR(block)) {
+				dev_err(dev->dev,
+						"reserve failed: %d, %d, %ld\n",
+						i, j, PTR_ERR(block));
+				return;
+			}
+			entry->paddr = tiler_ssptr(block);
+			entry->block = block;
+
+			DBG("%d:%d: %dx%d: paddr=%08x stride=%d", i, j, w, h,
+					entry->paddr,
+					usergart[i].stride_pfn << PAGE_SHIFT);
+		}
+	}
+
+	priv->has_dmm = true;
+}
+
+void omap_gem_deinit(struct drm_device *dev)
+{
+	/* I believe we can rely on there being no more outstanding GEM
+	 * objects which could depend on usergart/dmm at this point.
+	 */
+	kfree(usergart);
+}
diff --git a/drivers/staging/omapdrm/omap_gem_helpers.c b/drivers/staging/omapdrm/omap_gem_helpers.c
new file mode 100644
index 00000000..f895363a
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_gem_helpers.c
@@ -0,0 +1,169 @@
+/*
+ * drivers/staging/omapdrm/omap_gem_helpers.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* temporary copy of drm_gem_{get,put}_pages() until the
+ * "drm/gem: add functions to get/put pages" patch is merged..
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/shmem_fs.h>
+
+#include <drm/drmP.h>
+
+/**
+ * drm_gem_get_pages - helper to allocate backing pages for a GEM object
+ * @obj: obj in question
+ * @gfpmask: gfp mask of requested pages
+ */
+struct page ** _drm_gem_get_pages(struct drm_gem_object *obj, gfp_t gfpmask)
+{
+	struct inode *inode;
+	struct address_space *mapping;
+	struct page *p, **pages;
+	int i, npages;
+
+	/* This is the shared memory object that backs the GEM resource */
+	inode = obj->filp->f_path.dentry->d_inode;
+	mapping = inode->i_mapping;
+
+	npages = obj->size >> PAGE_SHIFT;
+
+	pages = drm_malloc_ab(npages, sizeof(struct page *));
+	if (pages == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	gfpmask |= mapping_gfp_mask(mapping);
+
+	for (i = 0; i < npages; i++) {
+		p = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
+		if (IS_ERR(p))
+			goto fail;
+		pages[i] = p;
+
+		/* There is a hypothetical issue w/ drivers that require
+		 * buffer memory in the low 4GB.. if the pages are un-
+		 * pinned, and swapped out, they can end up swapped back
+		 * in above 4GB.  If pages are already in memory, then
+		 * shmem_read_mapping_page_gfp will ignore the gfpmask,
+		 * even if the already in-memory page disobeys the mask.
+		 *
+		 * It is only a theoretical issue today, because none of
+		 * the devices with this limitation can be populated with
+		 * enough memory to trigger the issue.  But this BUG_ON()
+		 * is here as a reminder in case the problem with
+		 * shmem_read_mapping_page_gfp() isn't solved by the time
+		 * it does become a real issue.
+		 *
+		 * See this thread: http://lkml.org/lkml/2011/7/11/238
+		 */
+		BUG_ON((gfpmask & __GFP_DMA32) &&
+				(page_to_pfn(p) >= 0x00100000UL));
+	}
+
+	return pages;
+
+fail:
+	while (i--) {
+		page_cache_release(pages[i]);
+	}
+	drm_free_large(pages);
+	return ERR_CAST(p);
+}
+
+/**
+ * drm_gem_put_pages - helper to free backing pages for a GEM object
+ * @obj: obj in question
+ * @pages: pages to free
+ */
+void _drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages,
+		bool dirty, bool accessed)
+{
+	int i, npages;
+
+	npages = obj->size >> PAGE_SHIFT;
+
+	for (i = 0; i < npages; i++) {
+		if (dirty)
+			set_page_dirty(pages[i]);
+
+		if (accessed)
+			mark_page_accessed(pages[i]);
+
+		/* Undo the reference we took when populating the table */
+		page_cache_release(pages[i]);
+	}
+
+	drm_free_large(pages);
+}
+
+int
+_drm_gem_create_mmap_offset_size(struct drm_gem_object *obj, size_t size)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_gem_mm *mm = dev->mm_private;
+	struct drm_map_list *list;
+	struct drm_local_map *map;
+	int ret = 0;
+
+	/* Set the object up for mmap'ing */
+	list = &obj->map_list;
+	list->map = kzalloc(sizeof(struct drm_map_list), GFP_KERNEL);
+	if (!list->map)
+		return -ENOMEM;
+
+	map = list->map;
+	map->type = _DRM_GEM;
+	map->size = size;
+	map->handle = obj;
+
+	/* Get a DRM GEM mmap offset allocated... */
+	list->file_offset_node = drm_mm_search_free(&mm->offset_manager,
+			size / PAGE_SIZE, 0, 0);
+
+	if (!list->file_offset_node) {
+		DRM_ERROR("failed to allocate offset for bo %d\n", obj->name);
+		ret = -ENOSPC;
+		goto out_free_list;
+	}
+
+	list->file_offset_node = drm_mm_get_block(list->file_offset_node,
+			size / PAGE_SIZE, 0);
+	if (!list->file_offset_node) {
+		ret = -ENOMEM;
+		goto out_free_list;
+	}
+
+	list->hash.key = list->file_offset_node->start;
+	ret = drm_ht_insert_item(&mm->offset_hash, &list->hash);
+	if (ret) {
+		DRM_ERROR("failed to add to map hash\n");
+		goto out_free_mm;
+	}
+
+	return 0;
+
+out_free_mm:
+	drm_mm_put_block(list->file_offset_node);
+out_free_list:
+	kfree(list->map);
+	list->map = NULL;
+
+	return ret;
+}
diff --git a/drivers/staging/omapdrm/omap_plane.c b/drivers/staging/omapdrm/omap_plane.c
new file mode 100644
index 00000000..7997be74
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_plane.c
@@ -0,0 +1,487 @@
+/*
+ * drivers/staging/omapdrm/omap_plane.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kfifo.h>
+
+#include "omap_drv.h"
+
+/* some hackery because omapdss has an 'enum omap_plane' (which would be
+ * better named omap_plane_id).. and compiler seems unhappy about having
+ * both a 'struct omap_plane' and 'enum omap_plane'
+ */
+#define omap_plane _omap_plane
+
+/*
+ * plane funcs
+ */
+
+struct callback {
+	void (*fxn)(void *);
+	void *arg;
+};
+
+#define to_omap_plane(x) container_of(x, struct omap_plane, base)
+
+struct omap_plane {
+	struct drm_plane base;
+	struct omap_overlay *ovl;
+	struct omap_overlay_info info;
+
+	/* Source values, converted to integers because we don't support
+	 * fractional positions:
+	 */
+	unsigned int src_x, src_y;
+
+	/* last fb that we pinned: */
+	struct drm_framebuffer *pinned_fb;
+
+	uint32_t nformats;
+	uint32_t formats[32];
+
+	/* for synchronizing access to unpins fifo */
+	struct mutex unpin_mutex;
+
+	/* set of bo's pending unpin until next END_WIN irq */
+	DECLARE_KFIFO_PTR(unpin_fifo, struct drm_gem_object *);
+	int num_unpins, pending_num_unpins;
+
+	/* for deferred unpin when we need to wait for scanout complete irq */
+	struct work_struct work;
+
+	/* callback on next endwin irq */
+	struct callback endwin;
+};
+
+/* map from ovl->id to the irq we are interested in for scanout-done */
+static const uint32_t id2irq[] = {
+		[OMAP_DSS_GFX]    = DISPC_IRQ_GFX_END_WIN,
+		[OMAP_DSS_VIDEO1] = DISPC_IRQ_VID1_END_WIN,
+		[OMAP_DSS_VIDEO2] = DISPC_IRQ_VID2_END_WIN,
+		[OMAP_DSS_VIDEO3] = DISPC_IRQ_VID3_END_WIN,
+};
+
+static void dispc_isr(void *arg, uint32_t mask)
+{
+	struct drm_plane *plane = arg;
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct omap_drm_private *priv = plane->dev->dev_private;
+
+	omap_dispc_unregister_isr(dispc_isr, plane,
+			id2irq[omap_plane->ovl->id]);
+
+	queue_work(priv->wq, &omap_plane->work);
+}
+
+static void unpin_worker(struct work_struct *work)
+{
+	struct omap_plane *omap_plane =
+			container_of(work, struct omap_plane, work);
+	struct callback endwin;
+
+	mutex_lock(&omap_plane->unpin_mutex);
+	DBG("unpinning %d of %d", omap_plane->num_unpins,
+			omap_plane->num_unpins + omap_plane->pending_num_unpins);
+	while (omap_plane->num_unpins > 0) {
+		struct drm_gem_object *bo = NULL;
+		int ret = kfifo_get(&omap_plane->unpin_fifo, &bo);
+		WARN_ON(!ret);
+		omap_gem_put_paddr(bo);
+		drm_gem_object_unreference_unlocked(bo);
+		omap_plane->num_unpins--;
+	}
+	endwin = omap_plane->endwin;
+	omap_plane->endwin.fxn = NULL;
+	mutex_unlock(&omap_plane->unpin_mutex);
+
+	if (endwin.fxn)
+		endwin.fxn(endwin.arg);
+}
+
+static void install_irq(struct drm_plane *plane)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct omap_overlay *ovl = omap_plane->ovl;
+	int ret;
+
+	ret = omap_dispc_register_isr(dispc_isr, plane, id2irq[ovl->id]);
+
+	/*
+	 * omapdss has upper limit on # of registered irq handlers,
+	 * which we shouldn't hit.. but if we do the limit should
+	 * be raised or bad things happen:
+	 */
+	WARN_ON(ret == -EBUSY);
+}
+
+/* push changes down to dss2 */
+static int commit(struct drm_plane *plane)
+{
+	struct drm_device *dev = plane->dev;
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct omap_overlay *ovl = omap_plane->ovl;
+	struct omap_overlay_info *info = &omap_plane->info;
+	int ret;
+
+	DBG("%s", ovl->name);
+	DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
+			info->out_height, info->screen_width);
+	DBG("%d,%d %08x %08x", info->pos_x, info->pos_y,
+			info->paddr, info->p_uv_addr);
+
+	/* NOTE: do we want to do this at all here, or just wait
+	 * for dpms(ON) since other CRTC's may not have their mode
+	 * set yet, so fb dimensions may still change..
+	 */
+	ret = ovl->set_overlay_info(ovl, info);
+	if (ret) {
+		dev_err(dev->dev, "could not set overlay info\n");
+		return ret;
+	}
+
+	mutex_lock(&omap_plane->unpin_mutex);
+	omap_plane->num_unpins += omap_plane->pending_num_unpins;
+	omap_plane->pending_num_unpins = 0;
+	mutex_unlock(&omap_plane->unpin_mutex);
+
+	/* our encoder doesn't necessarily get a commit() after this, in
+	 * particular in the dpms() and mode_set_base() cases, so force the
+	 * manager to update:
+	 *
+	 * could this be in the encoder somehow?
+	 */
+	if (ovl->manager) {
+		ret = ovl->manager->apply(ovl->manager);
+		if (ret) {
+			dev_err(dev->dev, "could not apply settings\n");
+			return ret;
+		}
+
+		/*
+		 * NOTE: really this should be atomic w/ mgr->apply() but
+		 * omapdss does not expose such an API
+		 */
+		if (omap_plane->num_unpins > 0)
+			install_irq(plane);
+
+	} else {
+		struct omap_drm_private *priv = dev->dev_private;
+		queue_work(priv->wq, &omap_plane->work);
+	}
+
+
+	if (ovl->is_enabled(ovl)) {
+		omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y,
+				info->out_width, info->out_height);
+	}
+
+	return 0;
+}
+
+/* when CRTC that we are attached to has potentially changed, this checks
+ * if we are attached to proper manager, and if necessary updates.
+ */
+static void update_manager(struct drm_plane *plane)
+{
+	struct omap_drm_private *priv = plane->dev->dev_private;
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct omap_overlay *ovl = omap_plane->ovl;
+	struct omap_overlay_manager *mgr = NULL;
+	int i;
+
+	if (plane->crtc) {
+		for (i = 0; i < priv->num_encoders; i++) {
+			struct drm_encoder *encoder = priv->encoders[i];
+			if (encoder->crtc == plane->crtc) {
+				mgr = omap_encoder_get_manager(encoder);
+				break;
+			}
+		}
+	}
+
+	if (ovl->manager != mgr) {
+		bool enabled = ovl->is_enabled(ovl);
+
+		/* don't switch things around with enabled overlays: */
+		if (enabled)
+			omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+
+		if (ovl->manager) {
+			DBG("disconnecting %s from %s", ovl->name,
+					ovl->manager->name);
+			ovl->unset_manager(ovl);
+		}
+
+		if (mgr) {
+			DBG("connecting %s to %s", ovl->name, mgr->name);
+			ovl->set_manager(ovl, mgr);
+		}
+
+		if (enabled && mgr)
+			omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
+	}
+}
+
+static void unpin(void *arg, struct drm_gem_object *bo)
+{
+	struct drm_plane *plane = arg;
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+
+	if (kfifo_put(&omap_plane->unpin_fifo,
+			(const struct drm_gem_object **)&bo)) {
+		omap_plane->pending_num_unpins++;
+		/* also hold a ref so it isn't free'd while pinned */
+		drm_gem_object_reference(bo);
+	} else {
+		dev_err(plane->dev->dev, "unpin fifo full!\n");
+		omap_gem_put_paddr(bo);
+	}
+}
+
+/* update which fb (if any) is pinned for scanout */
+static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct drm_framebuffer *pinned_fb = omap_plane->pinned_fb;
+
+	if (pinned_fb != fb) {
+		int ret;
+
+		DBG("%p -> %p", pinned_fb, fb);
+
+		mutex_lock(&omap_plane->unpin_mutex);
+		ret = omap_framebuffer_replace(pinned_fb, fb, plane, unpin);
+		mutex_unlock(&omap_plane->unpin_mutex);
+
+		if (ret) {
+			dev_err(plane->dev->dev, "could not swap %p -> %p\n",
+					omap_plane->pinned_fb, fb);
+			omap_plane->pinned_fb = NULL;
+			return ret;
+		}
+
+		omap_plane->pinned_fb = fb;
+	}
+
+	return 0;
+}
+
+/* update parameters that are dependent on the framebuffer dimensions and
+ * position within the fb that this plane scans out from. This is called
+ * when framebuffer or x,y base may have changed.
+ */
+static void update_scanout(struct drm_plane *plane)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct omap_overlay_info *info = &omap_plane->info;
+	int ret;
+
+	ret = update_pin(plane, plane->fb);
+	if (ret) {
+		dev_err(plane->dev->dev,
+			"could not pin fb: %d\n", ret);
+		omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+		return;
+	}
+
+	omap_framebuffer_update_scanout(plane->fb,
+			omap_plane->src_x, omap_plane->src_y, info);
+
+	DBG("%s: %d,%d: %08x %08x (%d)", omap_plane->ovl->name,
+			omap_plane->src_x, omap_plane->src_y,
+			(u32)info->paddr, (u32)info->p_uv_addr,
+			info->screen_width);
+}
+
+int omap_plane_mode_set(struct drm_plane *plane,
+		struct drm_crtc *crtc, struct drm_framebuffer *fb,
+		int crtc_x, int crtc_y,
+		unsigned int crtc_w, unsigned int crtc_h,
+		uint32_t src_x, uint32_t src_y,
+		uint32_t src_w, uint32_t src_h)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+
+	/* src values are in Q16 fixed point, convert to integer: */
+	src_x = src_x >> 16;
+	src_y = src_y >> 16;
+	src_w = src_w >> 16;
+	src_h = src_h >> 16;
+
+	omap_plane->info.pos_x = crtc_x;
+	omap_plane->info.pos_y = crtc_y;
+	omap_plane->info.out_width = crtc_w;
+	omap_plane->info.out_height = crtc_h;
+	omap_plane->info.width = src_w;
+	omap_plane->info.height = src_h;
+	omap_plane->src_x = src_x;
+	omap_plane->src_y = src_y;
+
+	/* note: this is done after this fxn returns.. but if we need
+	 * to do a commit/update_scanout, etc before this returns we
+	 * need the current value.
+	 */
+	plane->fb = fb;
+	plane->crtc = crtc;
+
+	update_scanout(plane);
+	update_manager(plane);
+
+	return 0;
+}
+
+static int omap_plane_update(struct drm_plane *plane,
+		struct drm_crtc *crtc, struct drm_framebuffer *fb,
+		int crtc_x, int crtc_y,
+		unsigned int crtc_w, unsigned int crtc_h,
+		uint32_t src_x, uint32_t src_y,
+		uint32_t src_w, uint32_t src_h)
+{
+	omap_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y, crtc_w, crtc_h,
+			src_x, src_y, src_w, src_h);
+	return omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
+}
+
+static int omap_plane_disable(struct drm_plane *plane)
+{
+	return omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_plane_destroy(struct drm_plane *plane)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	DBG("%s", omap_plane->ovl->name);
+	omap_plane_disable(plane);
+	drm_plane_cleanup(plane);
+	WARN_ON(omap_plane->pending_num_unpins + omap_plane->num_unpins > 0);
+	kfifo_free(&omap_plane->unpin_fifo);
+	kfree(omap_plane);
+}
+
+int omap_plane_dpms(struct drm_plane *plane, int mode)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+	struct omap_overlay *ovl = omap_plane->ovl;
+	int r;
+
+	DBG("%s: %d", omap_plane->ovl->name, mode);
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		update_scanout(plane);
+		r = commit(plane);
+		if (!r)
+			r = ovl->enable(ovl);
+	} else {
+		struct omap_drm_private *priv = plane->dev->dev_private;
+		r = ovl->disable(ovl);
+		update_pin(plane, NULL);
+		queue_work(priv->wq, &omap_plane->work);
+	}
+
+	return r;
+}
+
+void omap_plane_on_endwin(struct drm_plane *plane,
+		void (*fxn)(void *), void *arg)
+{
+	struct omap_plane *omap_plane = to_omap_plane(plane);
+
+	mutex_lock(&omap_plane->unpin_mutex);
+	omap_plane->endwin.fxn = fxn;
+	omap_plane->endwin.arg = arg;
+	mutex_unlock(&omap_plane->unpin_mutex);
+
+	install_irq(plane);
+}
+
+static const struct drm_plane_funcs omap_plane_funcs = {
+		.update_plane = omap_plane_update,
+		.disable_plane = omap_plane_disable,
+		.destroy = omap_plane_destroy,
+};
+
+/* initialize plane */
+struct drm_plane *omap_plane_init(struct drm_device *dev,
+		struct omap_overlay *ovl, unsigned int possible_crtcs,
+		bool priv)
+{
+	struct drm_plane *plane = NULL;
+	struct omap_plane *omap_plane;
+	int ret;
+
+	DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name,
+			possible_crtcs, priv);
+
+	/* friendly reminder to update table for future hw: */
+	WARN_ON(ovl->id >= ARRAY_SIZE(id2irq));
+
+	omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL);
+	if (!omap_plane) {
+		dev_err(dev->dev, "could not allocate plane\n");
+		goto fail;
+	}
+
+	mutex_init(&omap_plane->unpin_mutex);
+
+	ret = kfifo_alloc(&omap_plane->unpin_fifo, 16, GFP_KERNEL);
+	if (ret) {
+		dev_err(dev->dev, "could not allocate unpin FIFO\n");
+		goto fail;
+	}
+
+	INIT_WORK(&omap_plane->work, unpin_worker);
+
+	omap_plane->nformats = omap_framebuffer_get_formats(
+			omap_plane->formats, ARRAY_SIZE(omap_plane->formats),
+			ovl->supported_modes);
+	omap_plane->ovl = ovl;
+	plane = &omap_plane->base;
+
+	drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs,
+			omap_plane->formats, omap_plane->nformats, priv);
+
+	/* get our starting configuration, set defaults for parameters
+	 * we don't currently use, etc:
+	 */
+	ovl->get_overlay_info(ovl, &omap_plane->info);
+	omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA;
+	omap_plane->info.rotation = OMAP_DSS_ROT_0;
+	omap_plane->info.global_alpha = 0xff;
+	omap_plane->info.mirror = 0;
+	omap_plane->info.mirror = 0;
+
+	/* Set defaults depending on whether we are a CRTC or overlay
+	 * layer.
+	 * TODO add ioctl to give userspace an API to change this.. this
+	 * will come in a subsequent patch.
+	 */
+	if (priv)
+		omap_plane->info.zorder = 0;
+	else
+		omap_plane->info.zorder = ovl->id;
+
+	update_manager(plane);
+
+	return plane;
+
+fail:
+	if (plane) {
+		omap_plane_destroy(plane);
+	}
+	return NULL;
+}
diff --git a/drivers/staging/omapdrm/omap_priv.h b/drivers/staging/omapdrm/omap_priv.h
new file mode 100644
index 00000000..ef644144
--- /dev/null
+++ b/drivers/staging/omapdrm/omap_priv.h
@@ -0,0 +1,55 @@
+/*
+ * include/drm/omap_priv.h
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __OMAP_PRIV_H__
+#define __OMAP_PRIV_H__
+
+/* Non-userspace facing APIs
+ */
+
+/* optional platform data to configure the default configuration of which
+ * pipes/overlays/CRTCs are used.. if this is not provided, then instead the
+ * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
+ * one manager, with priority given to managers that are connected to
+ * detected devices.  Remaining overlays are used as video planes.  This
+ * should be a good default behavior for most cases, but yet there still
+ * might be times when you wish to do something different.
+ */
+struct omap_kms_platform_data {
+	/* overlays to use as CRTCs: */
+	int ovl_cnt;
+	const int *ovl_ids;
+
+	/* overlays to use as video planes: */
+	int pln_cnt;
+	const int *pln_ids;
+
+	int mgr_cnt;
+	const int *mgr_ids;
+
+	int dev_cnt;
+	const char **dev_names;
+};
+
+struct omap_drm_platform_data {
+	struct omap_kms_platform_data *kms_pdata;
+	struct omap_dmm_platform_data *dmm_pdata;
+};
+
+#endif /* __OMAP_DRM_H__ */
diff --git a/drivers/staging/omapdrm/tcm-sita.c b/drivers/staging/omapdrm/tcm-sita.c
new file mode 100644
index 00000000..10d5ac3d
--- /dev/null
+++ b/drivers/staging/omapdrm/tcm-sita.c
@@ -0,0 +1,703 @@
+/*
+ * tcm-sita.c
+ *
+ * SImple Tiler Allocator (SiTA): 2D and 1D allocation(reservation) algorithm
+ *
+ * Authors: Ravi Ramachandra <r.ramachandra@ti.com>,
+ *          Lajos Molnar <molnar@ti.com>
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "tcm-sita.h"
+
+#define ALIGN_DOWN(value, align) ((value) & ~((align) - 1))
+
+/* Individual selection criteria for different scan areas */
+static s32 CR_L2R_T2B = CR_BIAS_HORIZONTAL;
+static s32 CR_R2L_T2B = CR_DIAGONAL_BALANCE;
+
+/*********************************************
+ *	TCM API - Sita Implementation
+ *********************************************/
+static s32 sita_reserve_2d(struct tcm *tcm, u16 h, u16 w, u8 align,
+			   struct tcm_area *area);
+static s32 sita_reserve_1d(struct tcm *tcm, u32 slots, struct tcm_area *area);
+static s32 sita_free(struct tcm *tcm, struct tcm_area *area);
+static void sita_deinit(struct tcm *tcm);
+
+/*********************************************
+ *	Main Scanner functions
+ *********************************************/
+static s32 scan_areas_and_find_fit(struct tcm *tcm, u16 w, u16 h, u16 align,
+				   struct tcm_area *area);
+
+static s32 scan_l2r_t2b(struct tcm *tcm, u16 w, u16 h, u16 align,
+			struct tcm_area *field, struct tcm_area *area);
+
+static s32 scan_r2l_t2b(struct tcm *tcm, u16 w, u16 h, u16 align,
+			struct tcm_area *field, struct tcm_area *area);
+
+static s32 scan_r2l_b2t_one_dim(struct tcm *tcm, u32 num_slots,
+			struct tcm_area *field, struct tcm_area *area);
+
+/*********************************************
+ *	Support Infrastructure Methods
+ *********************************************/
+static s32 is_area_free(struct tcm_area ***map, u16 x0, u16 y0, u16 w, u16 h);
+
+static s32 update_candidate(struct tcm *tcm, u16 x0, u16 y0, u16 w, u16 h,
+			    struct tcm_area *field, s32 criteria,
+			    struct score *best);
+
+static void get_nearness_factor(struct tcm_area *field,
+				struct tcm_area *candidate,
+				struct nearness_factor *nf);
+
+static void get_neighbor_stats(struct tcm *tcm, struct tcm_area *area,
+			       struct neighbor_stats *stat);
+
+static void fill_area(struct tcm *tcm,
+				struct tcm_area *area, struct tcm_area *parent);
+
+
+/*********************************************/
+
+/*********************************************
+ *	Utility Methods
+ *********************************************/
+struct tcm *sita_init(u16 width, u16 height, struct tcm_pt *attr)
+{
+	struct tcm *tcm;
+	struct sita_pvt *pvt;
+	struct tcm_area area = {0};
+	s32 i;
+
+	if (width == 0 || height == 0)
+		return NULL;
+
+	tcm = kmalloc(sizeof(*tcm), GFP_KERNEL);
+	pvt = kmalloc(sizeof(*pvt), GFP_KERNEL);
+	if (!tcm || !pvt)
+		goto error;
+
+	memset(tcm, 0, sizeof(*tcm));
+	memset(pvt, 0, sizeof(*pvt));
+
+	/* Updating the pointers to SiTA implementation APIs */
+	tcm->height = height;
+	tcm->width = width;
+	tcm->reserve_2d = sita_reserve_2d;
+	tcm->reserve_1d = sita_reserve_1d;
+	tcm->free = sita_free;
+	tcm->deinit = sita_deinit;
+	tcm->pvt = (void *)pvt;
+
+	spin_lock_init(&(pvt->lock));
+
+	/* Creating tam map */
+	pvt->map = kmalloc(sizeof(*pvt->map) * tcm->width, GFP_KERNEL);
+	if (!pvt->map)
+		goto error;
+
+	for (i = 0; i < tcm->width; i++) {
+		pvt->map[i] =
+			kmalloc(sizeof(**pvt->map) * tcm->height,
+								GFP_KERNEL);
+		if (pvt->map[i] == NULL) {
+			while (i--)
+				kfree(pvt->map[i]);
+			kfree(pvt->map);
+			goto error;
+		}
+	}
+
+	if (attr && attr->x <= tcm->width && attr->y <= tcm->height) {
+		pvt->div_pt.x = attr->x;
+		pvt->div_pt.y = attr->y;
+
+	} else {
+		/* Defaulting to 3:1 ratio on width for 2D area split */
+		/* Defaulting to 3:1 ratio on height for 2D and 1D split */
+		pvt->div_pt.x = (tcm->width * 3) / 4;
+		pvt->div_pt.y = (tcm->height * 3) / 4;
+	}
+
+	spin_lock(&(pvt->lock));
+	assign(&area, 0, 0, width - 1, height - 1);
+	fill_area(tcm, &area, NULL);
+	spin_unlock(&(pvt->lock));
+	return tcm;
+
+error:
+	kfree(tcm);
+	kfree(pvt);
+	return NULL;
+}
+
+static void sita_deinit(struct tcm *tcm)
+{
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+	struct tcm_area area = {0};
+	s32 i;
+
+	area.p1.x = tcm->width - 1;
+	area.p1.y = tcm->height - 1;
+
+	spin_lock(&(pvt->lock));
+	fill_area(tcm, &area, NULL);
+	spin_unlock(&(pvt->lock));
+
+	for (i = 0; i < tcm->height; i++)
+		kfree(pvt->map[i]);
+	kfree(pvt->map);
+	kfree(pvt);
+}
+
+/**
+ * Reserve a 1D area in the container
+ *
+ * @param num_slots	size of 1D area
+ * @param area		pointer to the area that will be populated with the
+ *			reserved area
+ *
+ * @return 0 on success, non-0 error value on failure.
+ */
+static s32 sita_reserve_1d(struct tcm *tcm, u32 num_slots,
+			   struct tcm_area *area)
+{
+	s32 ret;
+	struct tcm_area field = {0};
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+
+	spin_lock(&(pvt->lock));
+
+	/* Scanning entire container */
+	assign(&field, tcm->width - 1, tcm->height - 1, 0, 0);
+
+	ret = scan_r2l_b2t_one_dim(tcm, num_slots, &field, area);
+	if (!ret)
+		/* update map */
+		fill_area(tcm, area, area);
+
+	spin_unlock(&(pvt->lock));
+	return ret;
+}
+
+/**
+ * Reserve a 2D area in the container
+ *
+ * @param w	width
+ * @param h	height
+ * @param area	pointer to the area that will be populated with the reesrved
+ *		area
+ *
+ * @return 0 on success, non-0 error value on failure.
+ */
+static s32 sita_reserve_2d(struct tcm *tcm, u16 h, u16 w, u8 align,
+			   struct tcm_area *area)
+{
+	s32 ret;
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+
+	/* not supporting more than 64 as alignment */
+	if (align > 64)
+		return -EINVAL;
+
+	/* we prefer 1, 32 and 64 as alignment */
+	align = align <= 1 ? 1 : align <= 32 ? 32 : 64;
+
+	spin_lock(&(pvt->lock));
+	ret = scan_areas_and_find_fit(tcm, w, h, align, area);
+	if (!ret)
+		/* update map */
+		fill_area(tcm, area, area);
+
+	spin_unlock(&(pvt->lock));
+	return ret;
+}
+
+/**
+ * Unreserve a previously allocated 2D or 1D area
+ * @param area	area to be freed
+ * @return 0 - success
+ */
+static s32 sita_free(struct tcm *tcm, struct tcm_area *area)
+{
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+
+	spin_lock(&(pvt->lock));
+
+	/* check that this is in fact an existing area */
+	WARN_ON(pvt->map[area->p0.x][area->p0.y] != area ||
+		pvt->map[area->p1.x][area->p1.y] != area);
+
+	/* Clear the contents of the associated tiles in the map */
+	fill_area(tcm, area, NULL);
+
+	spin_unlock(&(pvt->lock));
+
+	return 0;
+}
+
+/**
+ * Note: In general the cordinates in the scan field area relevant to the can
+ * sweep directions. The scan origin (e.g. top-left corner) will always be
+ * the p0 member of the field.  Therfore, for a scan from top-left p0.x <= p1.x
+ * and p0.y <= p1.y; whereas, for a scan from bottom-right p1.x <= p0.x and p1.y
+ * <= p0.y
+ */
+
+/**
+ * Raster scan horizontally right to left from top to bottom to find a place for
+ * a 2D area of given size inside a scan field.
+ *
+ * @param w	width of desired area
+ * @param h	height of desired area
+ * @param align	desired area alignment
+ * @param area	pointer to the area that will be set to the best position
+ * @param field	area to scan (inclusive)
+ *
+ * @return 0 on success, non-0 error value on failure.
+ */
+static s32 scan_r2l_t2b(struct tcm *tcm, u16 w, u16 h, u16 align,
+			struct tcm_area *field, struct tcm_area *area)
+{
+	s32 x, y;
+	s16 start_x, end_x, start_y, end_y, found_x = -1;
+	struct tcm_area ***map = ((struct sita_pvt *)tcm->pvt)->map;
+	struct score best = {{0}, {0}, {0}, 0};
+
+	start_x = field->p0.x;
+	end_x = field->p1.x;
+	start_y = field->p0.y;
+	end_y = field->p1.y;
+
+	/* check scan area co-ordinates */
+	if (field->p0.x < field->p1.x ||
+	    field->p1.y < field->p0.y)
+		return -EINVAL;
+
+	/* check if allocation would fit in scan area */
+	if (w > LEN(start_x, end_x) || h > LEN(end_y, start_y))
+		return -ENOSPC;
+
+	/* adjust start_x and end_y, as allocation would not fit beyond */
+	start_x = ALIGN_DOWN(start_x - w + 1, align); /* - 1 to be inclusive */
+	end_y = end_y - h + 1;
+
+	/* check if allocation would still fit in scan area */
+	if (start_x < end_x)
+		return -ENOSPC;
+
+	/* scan field top-to-bottom, right-to-left */
+	for (y = start_y; y <= end_y; y++) {
+		for (x = start_x; x >= end_x; x -= align) {
+			if (is_area_free(map, x, y, w, h)) {
+				found_x = x;
+
+				/* update best candidate */
+				if (update_candidate(tcm, x, y, w, h, field,
+							CR_R2L_T2B, &best))
+					goto done;
+
+				/* change upper x bound */
+				end_x = x + 1;
+				break;
+			} else if (map[x][y] && map[x][y]->is2d) {
+				/* step over 2D areas */
+				x = ALIGN(map[x][y]->p0.x - w + 1, align);
+			}
+		}
+
+		/* break if you find a free area shouldering the scan field */
+		if (found_x == start_x)
+			break;
+	}
+
+	if (!best.a.tcm)
+		return -ENOSPC;
+done:
+	assign(area, best.a.p0.x, best.a.p0.y, best.a.p1.x, best.a.p1.y);
+	return 0;
+}
+
+/**
+ * Raster scan horizontally left to right from top to bottom to find a place for
+ * a 2D area of given size inside a scan field.
+ *
+ * @param w	width of desired area
+ * @param h	height of desired area
+ * @param align	desired area alignment
+ * @param area	pointer to the area that will be set to the best position
+ * @param field	area to scan (inclusive)
+ *
+ * @return 0 on success, non-0 error value on failure.
+ */
+static s32 scan_l2r_t2b(struct tcm *tcm, u16 w, u16 h, u16 align,
+			struct tcm_area *field, struct tcm_area *area)
+{
+	s32 x, y;
+	s16 start_x, end_x, start_y, end_y, found_x = -1;
+	struct tcm_area ***map = ((struct sita_pvt *)tcm->pvt)->map;
+	struct score best = {{0}, {0}, {0}, 0};
+
+	start_x = field->p0.x;
+	end_x = field->p1.x;
+	start_y = field->p0.y;
+	end_y = field->p1.y;
+
+	/* check scan area co-ordinates */
+	if (field->p1.x < field->p0.x ||
+	    field->p1.y < field->p0.y)
+		return -EINVAL;
+
+	/* check if allocation would fit in scan area */
+	if (w > LEN(end_x, start_x) || h > LEN(end_y, start_y))
+		return -ENOSPC;
+
+	start_x = ALIGN(start_x, align);
+
+	/* check if allocation would still fit in scan area */
+	if (w > LEN(end_x, start_x))
+		return -ENOSPC;
+
+	/* adjust end_x and end_y, as allocation would not fit beyond */
+	end_x = end_x - w + 1; /* + 1 to be inclusive */
+	end_y = end_y - h + 1;
+
+	/* scan field top-to-bottom, left-to-right */
+	for (y = start_y; y <= end_y; y++) {
+		for (x = start_x; x <= end_x; x += align) {
+			if (is_area_free(map, x, y, w, h)) {
+				found_x = x;
+
+				/* update best candidate */
+				if (update_candidate(tcm, x, y, w, h, field,
+							CR_L2R_T2B, &best))
+					goto done;
+				/* change upper x bound */
+				end_x = x - 1;
+
+				break;
+			} else if (map[x][y] && map[x][y]->is2d) {
+				/* step over 2D areas */
+				x = ALIGN_DOWN(map[x][y]->p1.x, align);
+			}
+		}
+
+		/* break if you find a free area shouldering the scan field */
+		if (found_x == start_x)
+			break;
+	}
+
+	if (!best.a.tcm)
+		return -ENOSPC;
+done:
+	assign(area, best.a.p0.x, best.a.p0.y, best.a.p1.x, best.a.p1.y);
+	return 0;
+}
+
+/**
+ * Raster scan horizontally right to left from bottom to top to find a place
+ * for a 1D area of given size inside a scan field.
+ *
+ * @param num_slots	size of desired area
+ * @param align		desired area alignment
+ * @param area		pointer to the area that will be set to the best
+ *			position
+ * @param field		area to scan (inclusive)
+ *
+ * @return 0 on success, non-0 error value on failure.
+ */
+static s32 scan_r2l_b2t_one_dim(struct tcm *tcm, u32 num_slots,
+				struct tcm_area *field, struct tcm_area *area)
+{
+	s32 found = 0;
+	s16 x, y;
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+	struct tcm_area *p;
+
+	/* check scan area co-ordinates */
+	if (field->p0.y < field->p1.y)
+		return -EINVAL;
+
+	/**
+	 * Currently we only support full width 1D scan field, which makes sense
+	 * since 1D slot-ordering spans the full container width.
+	 */
+	if (tcm->width != field->p0.x - field->p1.x + 1)
+		return -EINVAL;
+
+	/* check if allocation would fit in scan area */
+	if (num_slots > tcm->width * LEN(field->p0.y, field->p1.y))
+		return -ENOSPC;
+
+	x = field->p0.x;
+	y = field->p0.y;
+
+	/* find num_slots consecutive free slots to the left */
+	while (found < num_slots) {
+		if (y < 0)
+			return -ENOSPC;
+
+		/* remember bottom-right corner */
+		if (found == 0) {
+			area->p1.x = x;
+			area->p1.y = y;
+		}
+
+		/* skip busy regions */
+		p = pvt->map[x][y];
+		if (p) {
+			/* move to left of 2D areas, top left of 1D */
+			x = p->p0.x;
+			if (!p->is2d)
+				y = p->p0.y;
+
+			/* start over */
+			found = 0;
+		} else {
+			/* count consecutive free slots */
+			found++;
+			if (found == num_slots)
+				break;
+		}
+
+		/* move to the left */
+		if (x == 0)
+			y--;
+		x = (x ? : tcm->width) - 1;
+
+	}
+
+	/* set top-left corner */
+	area->p0.x = x;
+	area->p0.y = y;
+	return 0;
+}
+
+/**
+ * Find a place for a 2D area of given size inside a scan field based on its
+ * alignment needs.
+ *
+ * @param w	width of desired area
+ * @param h	height of desired area
+ * @param align	desired area alignment
+ * @param area	pointer to the area that will be set to the best position
+ *
+ * @return 0 on success, non-0 error value on failure.
+ */
+static s32 scan_areas_and_find_fit(struct tcm *tcm, u16 w, u16 h, u16 align,
+				   struct tcm_area *area)
+{
+	s32 ret = 0;
+	struct tcm_area field = {0};
+	u16 boundary_x, boundary_y;
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+
+	if (align > 1) {
+		/* prefer top-left corner */
+		boundary_x = pvt->div_pt.x - 1;
+		boundary_y = pvt->div_pt.y - 1;
+
+		/* expand width and height if needed */
+		if (w > pvt->div_pt.x)
+			boundary_x = tcm->width - 1;
+		if (h > pvt->div_pt.y)
+			boundary_y = tcm->height - 1;
+
+		assign(&field, 0, 0, boundary_x, boundary_y);
+		ret = scan_l2r_t2b(tcm, w, h, align, &field, area);
+
+		/* scan whole container if failed, but do not scan 2x */
+		if (ret != 0 && (boundary_x != tcm->width - 1 ||
+				 boundary_y != tcm->height - 1)) {
+			/* scan the entire container if nothing found */
+			assign(&field, 0, 0, tcm->width - 1, tcm->height - 1);
+			ret = scan_l2r_t2b(tcm, w, h, align, &field, area);
+		}
+	} else if (align == 1) {
+		/* prefer top-right corner */
+		boundary_x = pvt->div_pt.x;
+		boundary_y = pvt->div_pt.y - 1;
+
+		/* expand width and height if needed */
+		if (w > (tcm->width - pvt->div_pt.x))
+			boundary_x = 0;
+		if (h > pvt->div_pt.y)
+			boundary_y = tcm->height - 1;
+
+		assign(&field, tcm->width - 1, 0, boundary_x, boundary_y);
+		ret = scan_r2l_t2b(tcm, w, h, align, &field, area);
+
+		/* scan whole container if failed, but do not scan 2x */
+		if (ret != 0 && (boundary_x != 0 ||
+				 boundary_y != tcm->height - 1)) {
+			/* scan the entire container if nothing found */
+			assign(&field, tcm->width - 1, 0, 0, tcm->height - 1);
+			ret = scan_r2l_t2b(tcm, w, h, align, &field,
+					   area);
+		}
+	}
+
+	return ret;
+}
+
+/* check if an entire area is free */
+static s32 is_area_free(struct tcm_area ***map, u16 x0, u16 y0, u16 w, u16 h)
+{
+	u16 x = 0, y = 0;
+	for (y = y0; y < y0 + h; y++) {
+		for (x = x0; x < x0 + w; x++) {
+			if (map[x][y])
+				return false;
+		}
+	}
+	return true;
+}
+
+/* fills an area with a parent tcm_area */
+static void fill_area(struct tcm *tcm, struct tcm_area *area,
+			struct tcm_area *parent)
+{
+	s32 x, y;
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+	struct tcm_area a, a_;
+
+	/* set area's tcm; otherwise, enumerator considers it invalid */
+	area->tcm = tcm;
+
+	tcm_for_each_slice(a, *area, a_) {
+		for (x = a.p0.x; x <= a.p1.x; ++x)
+			for (y = a.p0.y; y <= a.p1.y; ++y)
+				pvt->map[x][y] = parent;
+
+	}
+}
+
+/**
+ * Compares a candidate area to the current best area, and if it is a better
+ * fit, it updates the best to this one.
+ *
+ * @param x0, y0, w, h		top, left, width, height of candidate area
+ * @param field			scan field
+ * @param criteria		scan criteria
+ * @param best			best candidate and its scores
+ *
+ * @return 1 (true) if the candidate area is known to be the final best, so no
+ * more searching should be performed
+ */
+static s32 update_candidate(struct tcm *tcm, u16 x0, u16 y0, u16 w, u16 h,
+			    struct tcm_area *field, s32 criteria,
+			    struct score *best)
+{
+	struct score me;	/* score for area */
+
+	/*
+	 * NOTE: For horizontal bias we always give the first found, because our
+	 * scan is horizontal-raster-based and the first candidate will always
+	 * have the horizontal bias.
+	 */
+	bool first = criteria & CR_BIAS_HORIZONTAL;
+
+	assign(&me.a, x0, y0, x0 + w - 1, y0 + h - 1);
+
+	/* calculate score for current candidate */
+	if (!first) {
+		get_neighbor_stats(tcm, &me.a, &me.n);
+		me.neighs = me.n.edge + me.n.busy;
+		get_nearness_factor(field, &me.a, &me.f);
+	}
+
+	/* the 1st candidate is always the best */
+	if (!best->a.tcm)
+		goto better;
+
+	BUG_ON(first);
+
+	/* diagonal balance check */
+	if ((criteria & CR_DIAGONAL_BALANCE) &&
+		best->neighs <= me.neighs &&
+		(best->neighs < me.neighs ||
+		 /* this implies that neighs and occupied match */
+		 best->n.busy < me.n.busy ||
+		 (best->n.busy == me.n.busy &&
+		  /* check the nearness factor */
+		  best->f.x + best->f.y > me.f.x + me.f.y)))
+		goto better;
+
+	/* not better, keep going */
+	return 0;
+
+better:
+	/* save current area as best */
+	memcpy(best, &me, sizeof(me));
+	best->a.tcm = tcm;
+	return first;
+}
+
+/**
+ * Calculate the nearness factor of an area in a search field.  The nearness
+ * factor is smaller if the area is closer to the search origin.
+ */
+static void get_nearness_factor(struct tcm_area *field, struct tcm_area *area,
+				struct nearness_factor *nf)
+{
+	/**
+	 * Using signed math as field coordinates may be reversed if
+	 * search direction is right-to-left or bottom-to-top.
+	 */
+	nf->x = (s32)(area->p0.x - field->p0.x) * 1000 /
+		(field->p1.x - field->p0.x);
+	nf->y = (s32)(area->p0.y - field->p0.y) * 1000 /
+		(field->p1.y - field->p0.y);
+}
+
+/* get neighbor statistics */
+static void get_neighbor_stats(struct tcm *tcm, struct tcm_area *area,
+			 struct neighbor_stats *stat)
+{
+	s16 x = 0, y = 0;
+	struct sita_pvt *pvt = (struct sita_pvt *)tcm->pvt;
+
+	/* Clearing any exisiting values */
+	memset(stat, 0, sizeof(*stat));
+
+	/* process top & bottom edges */
+	for (x = area->p0.x; x <= area->p1.x; x++) {
+		if (area->p0.y == 0)
+			stat->edge++;
+		else if (pvt->map[x][area->p0.y - 1])
+			stat->busy++;
+
+		if (area->p1.y == tcm->height - 1)
+			stat->edge++;
+		else if (pvt->map[x][area->p1.y + 1])
+			stat->busy++;
+	}
+
+	/* process left & right edges */
+	for (y = area->p0.y; y <= area->p1.y; ++y) {
+		if (area->p0.x == 0)
+			stat->edge++;
+		else if (pvt->map[area->p0.x - 1][y])
+			stat->busy++;
+
+		if (area->p1.x == tcm->width - 1)
+			stat->edge++;
+		else if (pvt->map[area->p1.x + 1][y])
+			stat->busy++;
+	}
+}
diff --git a/drivers/staging/omapdrm/tcm-sita.h b/drivers/staging/omapdrm/tcm-sita.h
new file mode 100644
index 00000000..0444f868
--- /dev/null
+++ b/drivers/staging/omapdrm/tcm-sita.h
@@ -0,0 +1,95 @@
+/*
+ * tcm_sita.h
+ *
+ * SImple Tiler Allocator (SiTA) private structures.
+ *
+ * Author: Ravi Ramachandra <r.ramachandra@ti.com>
+ *
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Texas Instruments Incorporated nor the names of
+ *   its contributors may be used to endorse or promote products derived
+ *   from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _TCM_SITA_H
+#define _TCM_SITA_H
+
+#include "tcm.h"
+
+/* length between two coordinates */
+#define LEN(a, b) ((a) > (b) ? (a) - (b) + 1 : (b) - (a) + 1)
+
+enum criteria {
+	CR_MAX_NEIGHS		= 0x01,
+	CR_FIRST_FOUND		= 0x10,
+	CR_BIAS_HORIZONTAL	= 0x20,
+	CR_BIAS_VERTICAL	= 0x40,
+	CR_DIAGONAL_BALANCE	= 0x80
+};
+
+/* nearness to the beginning of the search field from 0 to 1000 */
+struct nearness_factor {
+	s32 x;
+	s32 y;
+};
+
+/*
+ * Statistics on immediately neighboring slots.  Edge is the number of
+ * border segments that are also border segments of the scan field.  Busy
+ * refers to the number of neighbors that are occupied.
+ */
+struct neighbor_stats {
+	u16 edge;
+	u16 busy;
+};
+
+/* structure to keep the score of a potential allocation */
+struct score {
+	struct nearness_factor	f;
+	struct neighbor_stats	n;
+	struct tcm_area		a;
+	u16    neighs;		/* number of busy neighbors */
+};
+
+struct sita_pvt {
+	spinlock_t lock;	/* spinlock to protect access */
+	struct tcm_pt div_pt;	/* divider point splitting container */
+	struct tcm_area ***map;	/* pointers to the parent area for each slot */
+};
+
+/* assign coordinates to area */
+static inline
+void assign(struct tcm_area *a, u16 x0, u16 y0, u16 x1, u16 y1)
+{
+	a->p0.x = x0;
+	a->p0.y = y0;
+	a->p1.x = x1;
+	a->p1.y = y1;
+}
+
+#endif
diff --git a/drivers/staging/omapdrm/tcm.h b/drivers/staging/omapdrm/tcm.h
new file mode 100644
index 00000000..d273e3ee
--- /dev/null
+++ b/drivers/staging/omapdrm/tcm.h
@@ -0,0 +1,326 @@
+/*
+ * tcm.h
+ *
+ * TILER container manager specification and support functions for TI
+ * TILER driver.
+ *
+ * Author: Lajos Molnar <molnar@ti.com>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Texas Instruments Incorporated nor the names of
+ *   its contributors may be used to endorse or promote products derived
+ *   from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef TCM_H
+#define TCM_H
+
+struct tcm;
+
+/* point */
+struct tcm_pt {
+	u16 x;
+	u16 y;
+};
+
+/* 1d or 2d area */
+struct tcm_area {
+	bool is2d;		/* whether area is 1d or 2d */
+	struct tcm    *tcm;	/* parent */
+	struct tcm_pt  p0;
+	struct tcm_pt  p1;
+};
+
+struct tcm {
+	u16 width, height;	/* container dimensions */
+	int lut_id;		/* Lookup table identifier */
+
+	/* 'pvt' structure shall contain any tcm details (attr) along with
+	linked list of allocated areas and mutex for mutually exclusive access
+	to the list.  It may also contain copies of width and height to notice
+	any changes to the publicly available width and height fields. */
+	void *pvt;
+
+	/* function table */
+	s32 (*reserve_2d)(struct tcm *tcm, u16 height, u16 width, u8 align,
+			  struct tcm_area *area);
+	s32 (*reserve_1d)(struct tcm *tcm, u32 slots, struct tcm_area *area);
+	s32 (*free)      (struct tcm *tcm, struct tcm_area *area);
+	void (*deinit)   (struct tcm *tcm);
+};
+
+/*=============================================================================
+    BASIC TILER CONTAINER MANAGER INTERFACE
+=============================================================================*/
+
+/*
+ * NOTE:
+ *
+ * Since some basic parameter checking is done outside the TCM algorithms,
+ * TCM implementation do NOT have to check the following:
+ *
+ *   area pointer is NULL
+ *   width and height fits within container
+ *   number of pages is more than the size of the container
+ *
+ */
+
+struct tcm *sita_init(u16 width, u16 height, struct tcm_pt *attr);
+
+
+/**
+ * Deinitialize tiler container manager.
+ *
+ * @param tcm	Pointer to container manager.
+ *
+ * @return 0 on success, non-0 error value on error.  The call
+ *	   should free as much memory as possible and meaningful
+ *	   even on failure.  Some error codes: -ENODEV: invalid
+ *	   manager.
+ */
+static inline void tcm_deinit(struct tcm *tcm)
+{
+	if (tcm)
+		tcm->deinit(tcm);
+}
+
+/**
+ * Reserves a 2D area in the container.
+ *
+ * @param tcm		Pointer to container manager.
+ * @param height	Height(in pages) of area to be reserved.
+ * @param width		Width(in pages) of area to be reserved.
+ * @param align		Alignment requirement for top-left corner of area. Not
+ *			all values may be supported by the container manager,
+ *			but it must support 0 (1), 32 and 64.
+ *			0 value is equivalent to 1.
+ * @param area		Pointer to where the reserved area should be stored.
+ *
+ * @return 0 on success.  Non-0 error code on failure.  Also,
+ *	   the tcm field of the area will be set to NULL on
+ *	   failure.  Some error codes: -ENODEV: invalid manager,
+ *	   -EINVAL: invalid area, -ENOMEM: not enough space for
+ *	    allocation.
+ */
+static inline s32 tcm_reserve_2d(struct tcm *tcm, u16 width, u16 height,
+				 u16 align, struct tcm_area *area)
+{
+	/* perform rudimentary error checking */
+	s32 res = tcm  == NULL ? -ENODEV :
+		(area == NULL || width == 0 || height == 0 ||
+		 /* align must be a 2 power */
+		 (align & (align - 1))) ? -EINVAL :
+		(height > tcm->height || width > tcm->width) ? -ENOMEM : 0;
+
+	if (!res) {
+		area->is2d = true;
+		res = tcm->reserve_2d(tcm, height, width, align, area);
+		area->tcm = res ? NULL : tcm;
+	}
+
+	return res;
+}
+
+/**
+ * Reserves a 1D area in the container.
+ *
+ * @param tcm		Pointer to container manager.
+ * @param slots		Number of (contiguous) slots to reserve.
+ * @param area		Pointer to where the reserved area should be stored.
+ *
+ * @return 0 on success.  Non-0 error code on failure.  Also,
+ *	   the tcm field of the area will be set to NULL on
+ *	   failure.  Some error codes: -ENODEV: invalid manager,
+ *	   -EINVAL: invalid area, -ENOMEM: not enough space for
+ *	    allocation.
+ */
+static inline s32 tcm_reserve_1d(struct tcm *tcm, u32 slots,
+				 struct tcm_area *area)
+{
+	/* perform rudimentary error checking */
+	s32 res = tcm  == NULL ? -ENODEV :
+		(area == NULL || slots == 0) ? -EINVAL :
+		slots > (tcm->width * (u32) tcm->height) ? -ENOMEM : 0;
+
+	if (!res) {
+		area->is2d = false;
+		res = tcm->reserve_1d(tcm, slots, area);
+		area->tcm = res ? NULL : tcm;
+	}
+
+	return res;
+}
+
+/**
+ * Free a previously reserved area from the container.
+ *
+ * @param area	Pointer to area reserved by a prior call to
+ *		tcm_reserve_1d or tcm_reserve_2d call, whether
+ *		it was successful or not. (Note: all fields of
+ *		the structure must match.)
+ *
+ * @return 0 on success.  Non-0 error code on failure.  Also, the tcm
+ *	   field of the area is set to NULL on success to avoid subsequent
+ *	   freeing.  This call will succeed even if supplying
+ *	   the area from a failed reserved call.
+ */
+static inline s32 tcm_free(struct tcm_area *area)
+{
+	s32 res = 0; /* free succeeds by default */
+
+	if (area && area->tcm) {
+		res = area->tcm->free(area->tcm, area);
+		if (res == 0)
+			area->tcm = NULL;
+	}
+
+	return res;
+}
+
+/*=============================================================================
+    HELPER FUNCTION FOR ANY TILER CONTAINER MANAGER
+=============================================================================*/
+
+/**
+ * This method slices off the topmost 2D slice from the parent area, and stores
+ * it in the 'slice' parameter.  The 'parent' parameter will get modified to
+ * contain the remaining portion of the area.  If the whole parent area can
+ * fit in a 2D slice, its tcm pointer is set to NULL to mark that it is no
+ * longer a valid area.
+ *
+ * @param parent	Pointer to a VALID parent area that will get modified
+ * @param slice		Pointer to the slice area that will get modified
+ */
+static inline void tcm_slice(struct tcm_area *parent, struct tcm_area *slice)
+{
+	*slice = *parent;
+
+	/* check if we need to slice */
+	if (slice->tcm && !slice->is2d &&
+		slice->p0.y != slice->p1.y &&
+		(slice->p0.x || (slice->p1.x != slice->tcm->width - 1))) {
+		/* set end point of slice (start always remains) */
+		slice->p1.x = slice->tcm->width - 1;
+		slice->p1.y = (slice->p0.x) ? slice->p0.y : slice->p1.y - 1;
+		/* adjust remaining area */
+		parent->p0.x = 0;
+		parent->p0.y = slice->p1.y + 1;
+	} else {
+		/* mark this as the last slice */
+		parent->tcm = NULL;
+	}
+}
+
+/* Verify if a tcm area is logically valid */
+static inline bool tcm_area_is_valid(struct tcm_area *area)
+{
+	return area && area->tcm &&
+		/* coordinate bounds */
+		area->p1.x < area->tcm->width &&
+		area->p1.y < area->tcm->height &&
+		area->p0.y <= area->p1.y &&
+		/* 1D coordinate relationship + p0.x check */
+		((!area->is2d &&
+		  area->p0.x < area->tcm->width &&
+		  area->p0.x + area->p0.y * area->tcm->width <=
+		  area->p1.x + area->p1.y * area->tcm->width) ||
+		 /* 2D coordinate relationship */
+		 (area->is2d &&
+		  area->p0.x <= area->p1.x));
+}
+
+/* see if a coordinate is within an area */
+static inline bool __tcm_is_in(struct tcm_pt *p, struct tcm_area *a)
+{
+	u16 i;
+
+	if (a->is2d) {
+		return p->x >= a->p0.x && p->x <= a->p1.x &&
+		       p->y >= a->p0.y && p->y <= a->p1.y;
+	} else {
+		i = p->x + p->y * a->tcm->width;
+		return i >= a->p0.x + a->p0.y * a->tcm->width &&
+		       i <= a->p1.x + a->p1.y * a->tcm->width;
+	}
+}
+
+/* calculate area width */
+static inline u16 __tcm_area_width(struct tcm_area *area)
+{
+	return area->p1.x - area->p0.x + 1;
+}
+
+/* calculate area height */
+static inline u16 __tcm_area_height(struct tcm_area *area)
+{
+	return area->p1.y - area->p0.y + 1;
+}
+
+/* calculate number of slots in an area */
+static inline u16 __tcm_sizeof(struct tcm_area *area)
+{
+	return area->is2d ?
+		__tcm_area_width(area) * __tcm_area_height(area) :
+		(area->p1.x - area->p0.x + 1) + (area->p1.y - area->p0.y) *
+							area->tcm->width;
+}
+#define tcm_sizeof(area) __tcm_sizeof(&(area))
+#define tcm_awidth(area) __tcm_area_width(&(area))
+#define tcm_aheight(area) __tcm_area_height(&(area))
+#define tcm_is_in(pt, area) __tcm_is_in(&(pt), &(area))
+
+/* limit a 1D area to the first N pages */
+static inline s32 tcm_1d_limit(struct tcm_area *a, u32 num_pg)
+{
+	if (__tcm_sizeof(a) < num_pg)
+		return -ENOMEM;
+	if (!num_pg)
+		return -EINVAL;
+
+	a->p1.x = (a->p0.x + num_pg - 1) % a->tcm->width;
+	a->p1.y = a->p0.y + ((a->p0.x + num_pg - 1) / a->tcm->width);
+	return 0;
+}
+
+/**
+ * Iterate through 2D slices of a valid area. Behaves
+ * syntactically as a for(;;) statement.
+ *
+ * @param var		Name of a local variable of type 'struct
+ *			tcm_area *' that will get modified to
+ *			contain each slice.
+ * @param area		Pointer to the VALID parent area. This
+ *			structure will not get modified
+ *			throughout the loop.
+ *
+ */
+#define tcm_for_each_slice(var, area, safe) \
+	for (safe = area, \
+	     tcm_slice(&safe, &var); \
+	     var.tcm; tcm_slice(&safe, &var))
+
+#endif