Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 1113 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
new file mode 100644
index 00000000..75ba2311
--- /dev/null
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -0,0 +1,1113 @@
+/*
+ * Standard PCI Hot Plug Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include "shpchp.h"
+
+/* Slot Available Register I field definition */
+#define SLOT_33MHZ		0x0000001f
+#define SLOT_66MHZ_PCIX		0x00001f00
+#define SLOT_100MHZ_PCIX	0x001f0000
+#define SLOT_133MHZ_PCIX	0x1f000000
+
+/* Slot Available Register II field definition */
+#define SLOT_66MHZ		0x0000001f
+#define SLOT_66MHZ_PCIX_266	0x00000f00
+#define SLOT_100MHZ_PCIX_266	0x0000f000
+#define SLOT_133MHZ_PCIX_266	0x000f0000
+#define SLOT_66MHZ_PCIX_533	0x00f00000
+#define SLOT_100MHZ_PCIX_533	0x0f000000
+#define SLOT_133MHZ_PCIX_533	0xf0000000
+
+/* Slot Configuration */
+#define SLOT_NUM		0x0000001F
+#define	FIRST_DEV_NUM		0x00001F00
+#define PSN			0x07FF0000
+#define	UPDOWN			0x20000000
+#define	MRLSENSOR		0x40000000
+#define ATTN_BUTTON		0x80000000
+
+/*
+ * Interrupt Locator Register definitions
+ */
+#define CMD_INTR_PENDING	(1 << 0)
+#define SLOT_INTR_PENDING(i)	(1 << (i + 1))
+
+/*
+ * Controller SERR-INT Register
+ */
+#define GLOBAL_INTR_MASK	(1 << 0)
+#define GLOBAL_SERR_MASK	(1 << 1)
+#define COMMAND_INTR_MASK	(1 << 2)
+#define ARBITER_SERR_MASK	(1 << 3)
+#define COMMAND_DETECTED	(1 << 16)
+#define ARBITER_DETECTED	(1 << 17)
+#define SERR_INTR_RSVDZ_MASK	0xfffc0000
+
+/*
+ * Logical Slot Register definitions
+ */
+#define SLOT_REG(i)		(SLOT1 + (4 * i))
+
+#define SLOT_STATE_SHIFT	(0)
+#define SLOT_STATE_MASK		(3 << 0)
+#define SLOT_STATE_PWRONLY	(1)
+#define SLOT_STATE_ENABLED	(2)
+#define SLOT_STATE_DISABLED	(3)
+#define PWR_LED_STATE_SHIFT	(2)
+#define PWR_LED_STATE_MASK	(3 << 2)
+#define ATN_LED_STATE_SHIFT	(4)
+#define ATN_LED_STATE_MASK	(3 << 4)
+#define ATN_LED_STATE_ON	(1)
+#define ATN_LED_STATE_BLINK	(2)
+#define ATN_LED_STATE_OFF	(3)
+#define POWER_FAULT		(1 << 6)
+#define ATN_BUTTON		(1 << 7)
+#define MRL_SENSOR		(1 << 8)
+#define MHZ66_CAP		(1 << 9)
+#define PRSNT_SHIFT		(10)
+#define PRSNT_MASK		(3 << 10)
+#define PCIX_CAP_SHIFT		(12)
+#define PCIX_CAP_MASK_PI1	(3 << 12)
+#define PCIX_CAP_MASK_PI2	(7 << 12)
+#define PRSNT_CHANGE_DETECTED	(1 << 16)
+#define ISO_PFAULT_DETECTED	(1 << 17)
+#define BUTTON_PRESS_DETECTED	(1 << 18)
+#define MRL_CHANGE_DETECTED	(1 << 19)
+#define CON_PFAULT_DETECTED	(1 << 20)
+#define PRSNT_CHANGE_INTR_MASK	(1 << 24)
+#define ISO_PFAULT_INTR_MASK	(1 << 25)
+#define BUTTON_PRESS_INTR_MASK	(1 << 26)
+#define MRL_CHANGE_INTR_MASK	(1 << 27)
+#define CON_PFAULT_INTR_MASK	(1 << 28)
+#define MRL_CHANGE_SERR_MASK	(1 << 29)
+#define CON_PFAULT_SERR_MASK	(1 << 30)
+#define SLOT_REG_RSVDZ_MASK	((1 << 15) | (7 << 21))
+
+/*
+ * SHPC Command Code definitnions
+ *
+ *     Slot Operation				00h - 3Fh
+ *     Set Bus Segment Speed/Mode A		40h - 47h
+ *     Power-Only All Slots			48h
+ *     Enable All Slots				49h
+ *     Set Bus Segment Speed/Mode B (PI=2)	50h - 5Fh
+ *     Reserved Command Codes			60h - BFh
+ *     Vendor Specific Commands			C0h - FFh
+ */
+#define SET_SLOT_PWR		0x01	/* Slot Operation */
+#define SET_SLOT_ENABLE		0x02
+#define SET_SLOT_DISABLE	0x03
+#define SET_PWR_ON		0x04
+#define SET_PWR_BLINK		0x08
+#define SET_PWR_OFF		0x0c
+#define SET_ATTN_ON		0x10
+#define SET_ATTN_BLINK		0x20
+#define SET_ATTN_OFF		0x30
+#define SETA_PCI_33MHZ		0x40	/* Set Bus Segment Speed/Mode A */
+#define SETA_PCI_66MHZ		0x41
+#define SETA_PCIX_66MHZ		0x42
+#define SETA_PCIX_100MHZ	0x43
+#define SETA_PCIX_133MHZ	0x44
+#define SETA_RESERVED1		0x45
+#define SETA_RESERVED2		0x46
+#define SETA_RESERVED3		0x47
+#define SET_PWR_ONLY_ALL	0x48	/* Power-Only All Slots */
+#define SET_ENABLE_ALL		0x49	/* Enable All Slots */
+#define	SETB_PCI_33MHZ		0x50	/* Set Bus Segment Speed/Mode B */
+#define SETB_PCI_66MHZ		0x51
+#define SETB_PCIX_66MHZ_PM	0x52
+#define SETB_PCIX_100MHZ_PM	0x53
+#define SETB_PCIX_133MHZ_PM	0x54
+#define SETB_PCIX_66MHZ_EM	0x55
+#define SETB_PCIX_100MHZ_EM	0x56
+#define SETB_PCIX_133MHZ_EM	0x57
+#define SETB_PCIX_66MHZ_266	0x58
+#define SETB_PCIX_100MHZ_266	0x59
+#define SETB_PCIX_133MHZ_266	0x5a
+#define SETB_PCIX_66MHZ_533	0x5b
+#define SETB_PCIX_100MHZ_533	0x5c
+#define SETB_PCIX_133MHZ_533	0x5d
+#define SETB_RESERVED1		0x5e
+#define SETB_RESERVED2		0x5f
+
+/*
+ * SHPC controller command error code
+ */
+#define SWITCH_OPEN		0x1
+#define INVALID_CMD		0x2
+#define INVALID_SPEED_MODE	0x4
+
+/*
+ * For accessing SHPC Working Register Set via PCI Configuration Space
+ */
+#define DWORD_SELECT		0x2
+#define DWORD_DATA		0x4
+
+/* Field Offset in Logical Slot Register - byte boundary */
+#define SLOT_EVENT_LATCH	0x2
+#define SLOT_SERR_INT_MASK	0x3
+
+static irqreturn_t shpc_isr(int irq, void *dev_id);
+static void start_int_poll_timer(struct controller *ctrl, int sec);
+static int hpc_check_cmd_status(struct controller *ctrl);
+
+static inline u8 shpc_readb(struct controller *ctrl, int reg)
+{
+	return readb(ctrl->creg + reg);
+}
+
+static inline void shpc_writeb(struct controller *ctrl, int reg, u8 val)
+{
+	writeb(val, ctrl->creg + reg);
+}
+
+static inline u16 shpc_readw(struct controller *ctrl, int reg)
+{
+	return readw(ctrl->creg + reg);
+}
+
+static inline void shpc_writew(struct controller *ctrl, int reg, u16 val)
+{
+	writew(val, ctrl->creg + reg);
+}
+
+static inline u32 shpc_readl(struct controller *ctrl, int reg)
+{
+	return readl(ctrl->creg + reg);
+}
+
+static inline void shpc_writel(struct controller *ctrl, int reg, u32 val)
+{
+	writel(val, ctrl->creg + reg);
+}
+
+static inline int shpc_indirect_read(struct controller *ctrl, int index,
+				     u32 *value)
+{
+	int rc;
+	u32 cap_offset = ctrl->cap_offset;
+	struct pci_dev *pdev = ctrl->pci_dev;
+
+	rc = pci_write_config_byte(pdev, cap_offset + DWORD_SELECT, index);
+	if (rc)
+		return rc;
+	return pci_read_config_dword(pdev, cap_offset + DWORD_DATA, value);
+}
+
+/*
+ * This is the interrupt polling timeout function.
+ */
+static void int_poll_timeout(unsigned long data)
+{
+	struct controller *ctrl = (struct controller *)data;
+
+	/* Poll for interrupt events.  regs == NULL => polling */
+	shpc_isr(0, ctrl);
+
+	init_timer(&ctrl->poll_timer);
+	if (!shpchp_poll_time)
+		shpchp_poll_time = 2; /* default polling interval is 2 sec */
+
+	start_int_poll_timer(ctrl, shpchp_poll_time);
+}
+
+/*
+ * This function starts the interrupt polling timer.
+ */
+static void start_int_poll_timer(struct controller *ctrl, int sec)
+{
+	/* Clamp to sane value */
+	if ((sec <= 0) || (sec > 60))
+		sec = 2;
+
+	ctrl->poll_timer.function = &int_poll_timeout;
+	ctrl->poll_timer.data = (unsigned long)ctrl;
+	ctrl->poll_timer.expires = jiffies + sec * HZ;
+	add_timer(&ctrl->poll_timer);
+}
+
+static inline int is_ctrl_busy(struct controller *ctrl)
+{
+	u16 cmd_status = shpc_readw(ctrl, CMD_STATUS);
+	return cmd_status & 0x1;
+}
+
+/*
+ * Returns 1 if SHPC finishes executing a command within 1 sec,
+ * otherwise returns 0.
+ */
+static inline int shpc_poll_ctrl_busy(struct controller *ctrl)
+{
+	int i;
+
+	if (!is_ctrl_busy(ctrl))
+		return 1;
+
+	/* Check every 0.1 sec for a total of 1 sec */
+	for (i = 0; i < 10; i++) {
+		msleep(100);
+		if (!is_ctrl_busy(ctrl))
+			return 1;
+	}
+
+	return 0;
+}
+
+static inline int shpc_wait_cmd(struct controller *ctrl)
+{
+	int retval = 0;
+	unsigned long timeout = msecs_to_jiffies(1000);
+	int rc;
+
+	if (shpchp_poll_mode)
+		rc = shpc_poll_ctrl_busy(ctrl);
+	else
+		rc = wait_event_interruptible_timeout(ctrl->queue,
+						!is_ctrl_busy(ctrl), timeout);
+	if (!rc && is_ctrl_busy(ctrl)) {
+		retval = -EIO;
+		ctrl_err(ctrl, "Command not completed in 1000 msec\n");
+	} else if (rc < 0) {
+		retval = -EINTR;
+		ctrl_info(ctrl, "Command was interrupted by a signal\n");
+	}
+
+	return retval;
+}
+
+static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
+{
+	struct controller *ctrl = slot->ctrl;
+	u16 cmd_status;
+	int retval = 0;
+	u16 temp_word;
+
+	mutex_lock(&slot->ctrl->cmd_lock);
+
+	if (!shpc_poll_ctrl_busy(ctrl)) {
+		/* After 1 sec and and the controller is still busy */
+		ctrl_err(ctrl, "Controller is still busy after 1 sec\n");
+		retval = -EBUSY;
+		goto out;
+	}
+
+	++t_slot;
+	temp_word =  (t_slot << 8) | (cmd & 0xFF);
+	ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd);
+
+	/* To make sure the Controller Busy bit is 0 before we send out the
+	 * command.
+	 */
+	shpc_writew(ctrl, CMD, temp_word);
+
+	/*
+	 * Wait for command completion.
+	 */
+	retval = shpc_wait_cmd(slot->ctrl);
+	if (retval)
+		goto out;
+
+	cmd_status = hpc_check_cmd_status(slot->ctrl);
+	if (cmd_status) {
+		ctrl_err(ctrl,
+			 "Failed to issued command 0x%x (error code = %d)\n",
+			 cmd, cmd_status);
+		retval = -EIO;
+	}
+ out:
+	mutex_unlock(&slot->ctrl->cmd_lock);
+	return retval;
+}
+
+static int hpc_check_cmd_status(struct controller *ctrl)
+{
+	int retval = 0;
+	u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
+
+	switch (cmd_status >> 1) {
+	case 0:
+		retval = 0;
+		break;
+	case 1:
+		retval = SWITCH_OPEN;
+		ctrl_err(ctrl, "Switch opened!\n");
+		break;
+	case 2:
+		retval = INVALID_CMD;
+		ctrl_err(ctrl, "Invalid HPC command!\n");
+		break;
+	case 4:
+		retval = INVALID_SPEED_MODE;
+		ctrl_err(ctrl, "Invalid bus speed/mode!\n");
+		break;
+	default:
+		retval = cmd_status;
+	}
+
+	return retval;
+}
+
+
+static int hpc_get_attention_status(struct slot *slot, u8 *status)
+{
+	struct controller *ctrl = slot->ctrl;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT;
+
+	switch (state) {
+	case ATN_LED_STATE_ON:
+		*status = 1;	/* On */
+		break;
+	case ATN_LED_STATE_BLINK:
+		*status = 2;	/* Blink */
+		break;
+	case ATN_LED_STATE_OFF:
+		*status = 0;	/* Off */
+		break;
+	default:
+		*status = 0xFF;	/* Reserved */
+		break;
+	}
+
+	return 0;
+}
+
+static int hpc_get_power_status(struct slot * slot, u8 *status)
+{
+	struct controller *ctrl = slot->ctrl;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT;
+
+	switch (state) {
+	case SLOT_STATE_PWRONLY:
+		*status = 2;	/* Powered only */
+		break;
+	case SLOT_STATE_ENABLED:
+		*status = 1;	/* Enabled */
+		break;
+	case SLOT_STATE_DISABLED:
+		*status = 0;	/* Disabled */
+		break;
+	default:
+		*status = 0xFF;	/* Reserved */
+		break;
+	}
+
+	return 0;
+}
+
+
+static int hpc_get_latch_status(struct slot *slot, u8 *status)
+{
+	struct controller *ctrl = slot->ctrl;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+
+	*status = !!(slot_reg & MRL_SENSOR);	/* 0 -> close; 1 -> open */
+
+	return 0;
+}
+
+static int hpc_get_adapter_status(struct slot *slot, u8 *status)
+{
+	struct controller *ctrl = slot->ctrl;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT;
+
+	*status = (state != 0x3) ? 1 : 0;
+
+	return 0;
+}
+
+static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
+{
+	struct controller *ctrl = slot->ctrl;
+
+	*prog_int = shpc_readb(ctrl, PROG_INTERFACE);
+
+	return 0;
+}
+
+static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
+{
+	int retval = 0;
+	struct controller *ctrl = slot->ctrl;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+	u8 m66_cap  = !!(slot_reg & MHZ66_CAP);
+	u8 pi, pcix_cap;
+
+	if ((retval = hpc_get_prog_int(slot, &pi)))
+		return retval;
+
+	switch (pi) {
+	case 1:
+		pcix_cap = (slot_reg & PCIX_CAP_MASK_PI1) >> PCIX_CAP_SHIFT;
+		break;
+	case 2:
+		pcix_cap = (slot_reg & PCIX_CAP_MASK_PI2) >> PCIX_CAP_SHIFT;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n",
+		 __func__, slot_reg, pcix_cap, m66_cap);
+
+	switch (pcix_cap) {
+	case 0x0:
+		*value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		*value = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		*value = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x4:
+		*value = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0x5:
+		*value = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	case 0x2:
+	default:
+		*value = PCI_SPEED_UNKNOWN;
+		retval = -ENODEV;
+		break;
+	}
+
+	ctrl_dbg(ctrl, "Adapter speed = %d\n", *value);
+	return retval;
+}
+
+static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
+{
+	int retval = 0;
+	struct controller *ctrl = slot->ctrl;
+	u16 sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+
+	if (pi == 2) {
+		*mode = (sec_bus_status & 0x0100) >> 8;
+	} else {
+		retval = -1;
+	}
+
+	ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode);
+	return retval;
+}
+
+static int hpc_query_power_fault(struct slot * slot)
+{
+	struct controller *ctrl = slot->ctrl;
+	u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+
+	/* Note: Logic 0 => fault */
+	return !(slot_reg & POWER_FAULT);
+}
+
+static int hpc_set_attention_status(struct slot *slot, u8 value)
+{
+	u8 slot_cmd = 0;
+
+	switch (value) {
+		case 0 :
+			slot_cmd = SET_ATTN_OFF;	/* OFF */
+			break;
+		case 1:
+			slot_cmd = SET_ATTN_ON;		/* ON */
+			break;
+		case 2:
+			slot_cmd = SET_ATTN_BLINK;	/* BLINK */
+			break;
+		default:
+			return -1;
+	}
+
+	return shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+}
+
+
+static void hpc_set_green_led_on(struct slot *slot)
+{
+	shpc_write_cmd(slot, slot->hp_slot, SET_PWR_ON);
+}
+
+static void hpc_set_green_led_off(struct slot *slot)
+{
+	shpc_write_cmd(slot, slot->hp_slot, SET_PWR_OFF);
+}
+
+static void hpc_set_green_led_blink(struct slot *slot)
+{
+	shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK);
+}
+
+static void hpc_release_ctlr(struct controller *ctrl)
+{
+	int i;
+	u32 slot_reg, serr_int;
+
+	/*
+	 * Mask event interrupts and SERRs of all slots
+	 */
+	for (i = 0; i < ctrl->num_slots; i++) {
+		slot_reg = shpc_readl(ctrl, SLOT_REG(i));
+		slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
+			     BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
+			     CON_PFAULT_INTR_MASK   | MRL_CHANGE_SERR_MASK |
+			     CON_PFAULT_SERR_MASK);
+		slot_reg &= ~SLOT_REG_RSVDZ_MASK;
+		shpc_writel(ctrl, SLOT_REG(i), slot_reg);
+	}
+
+	cleanup_slots(ctrl);
+
+	/*
+	 * Mask SERR and System Interrupt generation
+	 */
+	serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
+	serr_int |= (GLOBAL_INTR_MASK  | GLOBAL_SERR_MASK |
+		     COMMAND_INTR_MASK | ARBITER_SERR_MASK);
+	serr_int &= ~SERR_INTR_RSVDZ_MASK;
+	shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
+
+	if (shpchp_poll_mode)
+		del_timer(&ctrl->poll_timer);
+	else {
+		free_irq(ctrl->pci_dev->irq, ctrl);
+		pci_disable_msi(ctrl->pci_dev);
+	}
+
+	iounmap(ctrl->creg);
+	release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
+}
+
+static int hpc_power_on_slot(struct slot * slot)
+{
+	int retval;
+
+	retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
+	if (retval)
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
+
+	return retval;
+}
+
+static int hpc_slot_enable(struct slot * slot)
+{
+	int retval;
+
+	/* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
+	retval = shpc_write_cmd(slot, slot->hp_slot,
+			SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
+	if (retval)
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
+
+	return retval;
+}
+
+static int hpc_slot_disable(struct slot * slot)
+{
+	int retval;
+
+	/* Slot - Disable, Power Indicator - Off, Attention Indicator - On */
+	retval = shpc_write_cmd(slot, slot->hp_slot,
+			SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
+	if (retval)
+		ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__);
+
+	return retval;
+}
+
+static int shpc_get_cur_bus_speed(struct controller *ctrl)
+{
+	int retval = 0;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
+	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+	u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG);
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+	u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
+
+	if ((pi == 1) && (speed_mode > 4)) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	switch (speed_mode) {
+	case 0x0:
+		bus_speed = PCI_SPEED_33MHz;
+		break;
+	case 0x1:
+		bus_speed = PCI_SPEED_66MHz;
+		break;
+	case 0x2:
+		bus_speed = PCI_SPEED_66MHz_PCIX;
+		break;
+	case 0x3:
+		bus_speed = PCI_SPEED_100MHz_PCIX;
+		break;
+	case 0x4:
+		bus_speed = PCI_SPEED_133MHz_PCIX;
+		break;
+	case 0x5:
+		bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+		break;
+	case 0x6:
+		bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+		break;
+	case 0x7:
+		bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+		break;
+	case 0x8:
+		bus_speed = PCI_SPEED_66MHz_PCIX_266;
+		break;
+	case 0x9:
+		bus_speed = PCI_SPEED_100MHz_PCIX_266;
+		break;
+	case 0xa:
+		bus_speed = PCI_SPEED_133MHz_PCIX_266;
+		break;
+	case 0xb:
+		bus_speed = PCI_SPEED_66MHz_PCIX_533;
+		break;
+	case 0xc:
+		bus_speed = PCI_SPEED_100MHz_PCIX_533;
+		break;
+	case 0xd:
+		bus_speed = PCI_SPEED_133MHz_PCIX_533;
+		break;
+	default:
+		retval = -ENODEV;
+		break;
+	}
+
+ out:
+	bus->cur_bus_speed = bus_speed;
+	dbg("Current bus speed = %d\n", bus_speed);
+	return retval;
+}
+
+
+static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
+{
+	int retval;
+	struct controller *ctrl = slot->ctrl;
+	u8 pi, cmd;
+
+	pi = shpc_readb(ctrl, PROG_INTERFACE);
+	if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
+		return -EINVAL;
+
+	switch (value) {
+	case PCI_SPEED_33MHz:
+		cmd = SETA_PCI_33MHZ;
+		break;
+	case PCI_SPEED_66MHz:
+		cmd = SETA_PCI_66MHZ;
+		break;
+	case PCI_SPEED_66MHz_PCIX:
+		cmd = SETA_PCIX_66MHZ;
+		break;
+	case PCI_SPEED_100MHz_PCIX:
+		cmd = SETA_PCIX_100MHZ;
+		break;
+	case PCI_SPEED_133MHz_PCIX:
+		cmd = SETA_PCIX_133MHZ;
+		break;
+	case PCI_SPEED_66MHz_PCIX_ECC:
+		cmd = SETB_PCIX_66MHZ_EM;
+		break;
+	case PCI_SPEED_100MHz_PCIX_ECC:
+		cmd = SETB_PCIX_100MHZ_EM;
+		break;
+	case PCI_SPEED_133MHz_PCIX_ECC:
+		cmd = SETB_PCIX_133MHZ_EM;
+		break;
+	case PCI_SPEED_66MHz_PCIX_266:
+		cmd = SETB_PCIX_66MHZ_266;
+		break;
+	case PCI_SPEED_100MHz_PCIX_266:
+		cmd = SETB_PCIX_100MHZ_266;
+		break;
+	case PCI_SPEED_133MHz_PCIX_266:
+		cmd = SETB_PCIX_133MHZ_266;
+		break;
+	case PCI_SPEED_66MHz_PCIX_533:
+		cmd = SETB_PCIX_66MHZ_533;
+		break;
+	case PCI_SPEED_100MHz_PCIX_533:
+		cmd = SETB_PCIX_100MHZ_533;
+		break;
+	case PCI_SPEED_133MHz_PCIX_533:
+		cmd = SETB_PCIX_133MHZ_533;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	retval = shpc_write_cmd(slot, 0, cmd);
+	if (retval)
+		ctrl_err(ctrl, "%s: Write command failed!\n", __func__);
+	else
+		shpc_get_cur_bus_speed(ctrl);
+
+	return retval;
+}
+
+static irqreturn_t shpc_isr(int irq, void *dev_id)
+{
+	struct controller *ctrl = (struct controller *)dev_id;
+	u32 serr_int, slot_reg, intr_loc, intr_loc2;
+	int hp_slot;
+
+	/* Check to see if it was our interrupt */
+	intr_loc = shpc_readl(ctrl, INTR_LOC);
+	if (!intr_loc)
+		return IRQ_NONE;
+
+	ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc);
+
+	if(!shpchp_poll_mode) {
+		/*
+		 * Mask Global Interrupt Mask - see implementation
+		 * note on p. 139 of SHPC spec rev 1.0
+		 */
+		serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
+		serr_int |= GLOBAL_INTR_MASK;
+		serr_int &= ~SERR_INTR_RSVDZ_MASK;
+		shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
+
+		intr_loc2 = shpc_readl(ctrl, INTR_LOC);
+		ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2);
+	}
+
+	if (intr_loc & CMD_INTR_PENDING) {
+		/*
+		 * Command Complete Interrupt Pending
+		 * RO only - clear by writing 1 to the Command Completion
+		 * Detect bit in Controller SERR-INT register
+		 */
+		serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
+		serr_int &= ~SERR_INTR_RSVDZ_MASK;
+		shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
+
+		wake_up_interruptible(&ctrl->queue);
+	}
+
+	if (!(intr_loc & ~CMD_INTR_PENDING))
+		goto out;
+
+	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
+		/* To find out which slot has interrupt pending */
+		if (!(intr_loc & SLOT_INTR_PENDING(hp_slot)))
+			continue;
+
+		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
+		ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n",
+			 hp_slot, slot_reg);
+
+		if (slot_reg & MRL_CHANGE_DETECTED)
+			shpchp_handle_switch_change(hp_slot, ctrl);
+
+		if (slot_reg & BUTTON_PRESS_DETECTED)
+			shpchp_handle_attention_button(hp_slot, ctrl);
+
+		if (slot_reg & PRSNT_CHANGE_DETECTED)
+			shpchp_handle_presence_change(hp_slot, ctrl);
+
+		if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED))
+			shpchp_handle_power_fault(hp_slot, ctrl);
+
+		/* Clear all slot events */
+		slot_reg &= ~SLOT_REG_RSVDZ_MASK;
+		shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
+	}
+ out:
+	if (!shpchp_poll_mode) {
+		/* Unmask Global Interrupt Mask */
+		serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE);
+		serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
+		shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int shpc_get_max_bus_speed(struct controller *ctrl)
+{
+	int retval = 0;
+	struct pci_bus *bus = ctrl->pci_dev->subordinate;
+	enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+	u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
+	u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
+	u32 slot_avail2 = shpc_readl(ctrl, SLOT_AVAIL2);
+
+	if (pi == 2) {
+		if (slot_avail2 & SLOT_133MHZ_PCIX_533)
+			bus_speed = PCI_SPEED_133MHz_PCIX_533;
+		else if (slot_avail2 & SLOT_100MHZ_PCIX_533)
+			bus_speed = PCI_SPEED_100MHz_PCIX_533;
+		else if (slot_avail2 & SLOT_66MHZ_PCIX_533)
+			bus_speed = PCI_SPEED_66MHz_PCIX_533;
+		else if (slot_avail2 & SLOT_133MHZ_PCIX_266)
+			bus_speed = PCI_SPEED_133MHz_PCIX_266;
+		else if (slot_avail2 & SLOT_100MHZ_PCIX_266)
+			bus_speed = PCI_SPEED_100MHz_PCIX_266;
+		else if (slot_avail2 & SLOT_66MHZ_PCIX_266)
+			bus_speed = PCI_SPEED_66MHz_PCIX_266;
+	}
+
+	if (bus_speed == PCI_SPEED_UNKNOWN) {
+		if (slot_avail1 & SLOT_133MHZ_PCIX)
+			bus_speed = PCI_SPEED_133MHz_PCIX;
+		else if (slot_avail1 & SLOT_100MHZ_PCIX)
+			bus_speed = PCI_SPEED_100MHz_PCIX;
+		else if (slot_avail1 & SLOT_66MHZ_PCIX)
+			bus_speed = PCI_SPEED_66MHz_PCIX;
+		else if (slot_avail2 & SLOT_66MHZ)
+			bus_speed = PCI_SPEED_66MHz;
+		else if (slot_avail1 & SLOT_33MHZ)
+			bus_speed = PCI_SPEED_33MHz;
+		else
+			retval = -ENODEV;
+	}
+
+	bus->max_bus_speed = bus_speed;
+	ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed);
+
+	return retval;
+}
+
+static struct hpc_ops shpchp_hpc_ops = {
+	.power_on_slot			= hpc_power_on_slot,
+	.slot_enable			= hpc_slot_enable,
+	.slot_disable			= hpc_slot_disable,
+	.set_bus_speed_mode		= hpc_set_bus_speed_mode,
+	.set_attention_status	= hpc_set_attention_status,
+	.get_power_status		= hpc_get_power_status,
+	.get_attention_status	= hpc_get_attention_status,
+	.get_latch_status		= hpc_get_latch_status,
+	.get_adapter_status		= hpc_get_adapter_status,
+
+	.get_adapter_speed		= hpc_get_adapter_speed,
+	.get_mode1_ECC_cap		= hpc_get_mode1_ECC_cap,
+	.get_prog_int			= hpc_get_prog_int,
+
+	.query_power_fault		= hpc_query_power_fault,
+	.green_led_on			= hpc_set_green_led_on,
+	.green_led_off			= hpc_set_green_led_off,
+	.green_led_blink		= hpc_set_green_led_blink,
+
+	.release_ctlr			= hpc_release_ctlr,
+};
+
+int shpc_init(struct controller *ctrl, struct pci_dev *pdev)
+{
+	int rc = -1, num_slots = 0;
+	u8 hp_slot;
+	u32 shpc_base_offset;
+	u32 tempdword, slot_reg, slot_config;
+	u8 i;
+
+	ctrl->pci_dev = pdev;  /* pci_dev of the P2P bridge */
+	ctrl_dbg(ctrl, "Hotplug Controller:\n");
+
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) {
+		/* amd shpc driver doesn't use Base Offset; assume 0 */
+		ctrl->mmio_base = pci_resource_start(pdev, 0);
+		ctrl->mmio_size = pci_resource_len(pdev, 0);
+	} else {
+		ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC);
+		if (!ctrl->cap_offset) {
+			ctrl_err(ctrl, "Cannot find PCI capability\n");
+			goto abort;
+		}
+		ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset);
+
+		rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset);
+		if (rc) {
+			ctrl_err(ctrl, "Cannot read base_offset\n");
+			goto abort;
+		}
+
+		rc = shpc_indirect_read(ctrl, 3, &tempdword);
+		if (rc) {
+			ctrl_err(ctrl, "Cannot read slot config\n");
+			goto abort;
+		}
+		num_slots = tempdword & SLOT_NUM;
+		ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots);
+
+		for (i = 0; i < 9 + num_slots; i++) {
+			rc = shpc_indirect_read(ctrl, i, &tempdword);
+			if (rc) {
+				ctrl_err(ctrl,
+					 "Cannot read creg (index = %d)\n", i);
+				goto abort;
+			}
+			ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword);
+		}
+
+		ctrl->mmio_base =
+			pci_resource_start(pdev, 0) + shpc_base_offset;
+		ctrl->mmio_size = 0x24 + 0x4 * num_slots;
+	}
+
+	ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
+		  pdev->vendor, pdev->device, pdev->subsystem_vendor,
+		  pdev->subsystem_device);
+
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		ctrl_err(ctrl, "pci_enable_device failed\n");
+		goto abort;
+	}
+
+	if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) {
+		ctrl_err(ctrl, "Cannot reserve MMIO region\n");
+		rc = -1;
+		goto abort;
+	}
+
+	ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size);
+	if (!ctrl->creg) {
+		ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n",
+			 ctrl->mmio_size, ctrl->mmio_base);
+		release_mem_region(ctrl->mmio_base, ctrl->mmio_size);
+		rc = -1;
+		goto abort;
+	}
+	ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg);
+
+	mutex_init(&ctrl->crit_sect);
+	mutex_init(&ctrl->cmd_lock);
+
+	/* Setup wait queue */
+	init_waitqueue_head(&ctrl->queue);
+
+	ctrl->hpc_ops = &shpchp_hpc_ops;
+
+	/* Return PCI Controller Info */
+	slot_config = shpc_readl(ctrl, SLOT_CONFIG);
+	ctrl->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8;
+	ctrl->num_slots = slot_config & SLOT_NUM;
+	ctrl->first_slot = (slot_config & PSN) >> 16;
+	ctrl->slot_num_inc = ((slot_config & UPDOWN) >> 29) ? 1 : -1;
+
+	/* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
+	tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
+	ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
+	tempdword |= (GLOBAL_INTR_MASK  | GLOBAL_SERR_MASK |
+		      COMMAND_INTR_MASK | ARBITER_SERR_MASK);
+	tempdword &= ~SERR_INTR_RSVDZ_MASK;
+	shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
+	tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
+	ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
+
+	/* Mask the MRL sensor SERR Mask of individual slot in
+	 * Slot SERR-INT Mask & clear all the existing event if any
+	 */
+	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
+		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
+		ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+			 hp_slot, slot_reg);
+		slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
+			     BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
+			     CON_PFAULT_INTR_MASK   | MRL_CHANGE_SERR_MASK |
+			     CON_PFAULT_SERR_MASK);
+		slot_reg &= ~SLOT_REG_RSVDZ_MASK;
+		shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
+	}
+
+	if (shpchp_poll_mode) {
+		/* Install interrupt polling timer. Start with 10 sec delay */
+		init_timer(&ctrl->poll_timer);
+		start_int_poll_timer(ctrl, 10);
+	} else {
+		/* Installs the interrupt handler */
+		rc = pci_enable_msi(pdev);
+		if (rc) {
+			ctrl_info(ctrl,
+				  "Can't get msi for the hotplug controller\n");
+			ctrl_info(ctrl,
+				  "Use INTx for the hotplug controller\n");
+		}
+
+		rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
+				 MY_NAME, (void *)ctrl);
+		ctrl_dbg(ctrl, "request_irq %d (returns %d)\n",
+			 ctrl->pci_dev->irq, rc);
+		if (rc) {
+			ctrl_err(ctrl, "Can't get irq %d for the hotplug "
+				 "controller\n", ctrl->pci_dev->irq);
+			goto abort_iounmap;
+		}
+	}
+	ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq);
+
+	shpc_get_max_bus_speed(ctrl);
+	shpc_get_cur_bus_speed(ctrl);
+
+	/*
+	 * Unmask all event interrupts of all slots
+	 */
+	for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
+		slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot));
+		ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n",
+			 hp_slot, slot_reg);
+		slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK |
+			      BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK |
+			      CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK);
+		shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
+	}
+	if (!shpchp_poll_mode) {
+		/* Unmask all general input interrupts and SERR */
+		tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
+		tempdword &= ~(GLOBAL_INTR_MASK | COMMAND_INTR_MASK |
+			       SERR_INTR_RSVDZ_MASK);
+		shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword);
+		tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE);
+		ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword);
+	}
+
+	return 0;
+
+	/* We end up here for the many possible ways to fail this API.  */
+abort_iounmap:
+	iounmap(ctrl->creg);
+abort:
+	return rc;
+}