Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

22 files changed, 13541 insertions, 0 deletions

diff --git a/drivers/parport/BUGS-parport b/drivers/parport/BUGS-parport
new file mode 100644
index 00000000..622ca3cc
--- /dev/null
+++ b/drivers/parport/BUGS-parport
@@ -0,0 +1,9 @@
+Currently known (or at least suspected) bugs in parport:
+
+o lp doesn't allow you to read status while printing is in progress (is
+  this still true?).
+
+o parport_pc_ecp_read_block_pio() is broken.  parport will revert to the
+  software-driven mode in ieee1284_ops.c
+
+See <URL:http://people.redhat.com/twaugh/parport/>.
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
new file mode 100644
index 00000000..d92185a5
--- /dev/null
+++ b/drivers/parport/Kconfig
@@ -0,0 +1,160 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Parport configuration.
+#
+
+menuconfig PARPORT
+	tristate "Parallel port support"
+	depends on HAS_IOMEM
+	---help---
+	  If you want to use devices connected to your machine's parallel port
+	  (the connector at the computer with 25 holes), e.g. printer, ZIP
+	  drive, PLIP link (Parallel Line Internet Protocol is mainly used to
+	  create a mini network by connecting the parallel ports of two local
+	  machines) etc., then you need to say Y here; please read
+	  <file:Documentation/parport.txt> and
+	  <file:drivers/parport/BUGS-parport>.
+
+	  For extensive information about drivers for many devices attaching
+	  to the parallel port see <http://www.torque.net/linux-pp.html> on
+	  the WWW.
+
+	  It is possible to share a single parallel port among several devices
+	  and it is safe to compile all the corresponding drivers into the
+	  kernel. To compile parallel port support as a module, choose M here:
+	  the module will be called parport.
+	  If you have more than one parallel port and want to specify which
+	  port and IRQ to be used by this driver at module load time, take a
+	  look at <file:Documentation/parport.txt>.
+
+	  If unsure, say Y.
+
+if PARPORT
+
+config PARPORT_PC
+	tristate "PC-style hardware"
+	depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+		(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
+	---help---
+	  You should say Y here if you have a PC-style parallel port. All
+	  IBM PC compatible computers and some Alphas have PC-style
+	  parallel ports.  PA-RISC owners should only say Y here if they
+	  have a SuperIO parallel port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called parport_pc.
+
+	  If unsure, say Y.
+
+config PARPORT_SERIAL
+	tristate "Multi-IO cards (parallel and serial)"
+	depends on SERIAL_8250_PCI && PARPORT_PC && PCI
+	help
+	  This adds support for multi-IO PCI cards that have parallel and
+	  serial ports.  You should say Y or M here.  If you say M, the module
+	  will be called parport_serial.
+
+config PARPORT_PC_FIFO
+	bool "Use FIFO/DMA if available (EXPERIMENTAL)"
+	depends on PARPORT_PC && EXPERIMENTAL
+	help
+	  Many parallel port chipsets provide hardware that can speed up
+	  printing. Say Y here if you want to take advantage of that.
+
+	  As well as actually having a FIFO, or DMA capability, the kernel
+	  will need to know which IRQ the parallel port has.  By default,
+	  parallel port interrupts will not be used, and so neither will the
+	  FIFO.  See <file:Documentation/parport.txt> to find out how to
+	  specify which IRQ/DMA to use.
+
+config PARPORT_PC_SUPERIO
+	bool "SuperIO chipset support (EXPERIMENTAL)"
+	depends on PARPORT_PC && EXPERIMENTAL
+	help
+	  Saying Y here enables some probes for Super-IO chipsets in order to
+	  find out things like base addresses, IRQ lines and DMA channels.  It
+	  is safe to say N.
+
+config PARPORT_PC_PCMCIA
+	tristate "Support for PCMCIA management for PC-style ports"
+	depends on PCMCIA && PARPORT_PC
+	help
+	  Say Y here if you need PCMCIA support for your PC-style parallel
+	  ports. If unsure, say N.
+
+config PARPORT_IP32
+	tristate "SGI IP32 builtin port (EXPERIMENTAL)"
+	depends on SGI_IP32 && EXPERIMENTAL
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port on
+	  SGI O2 machines. This code is also available as a module (say M),
+	  called parport_ip32.  If in doubt, saying N is the safe plan.
+
+config PARPORT_AMIGA
+	tristate "Amiga builtin port"
+	depends on AMIGA
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  Amiga machines. This code is also available as a module (say M),
+	  called parport_amiga. If in doubt, saying N is the safe plan.
+
+config PARPORT_MFC3
+	tristate "Multiface III parallel port"
+	depends on ZORRO
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need parallel port support for the MFC3 card.
+	  This code is also available as a module (say M), called
+	  parport_mfc3. If in doubt, saying N is the safe plan.
+
+config PARPORT_ATARI
+	tristate "Atari hardware"
+	depends on ATARI
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  Atari machines. This code is also available as a module (say M),
+	  called parport_atari. If in doubt, saying N is the safe plan.
+
+config PARPORT_GSC
+	tristate
+	default GSC
+	select PARPORT_NOT_PC
+
+config PARPORT_SUNBPP
+	tristate "Sparc hardware (EXPERIMENTAL)"
+	depends on SBUS && EXPERIMENTAL
+	select PARPORT_NOT_PC
+	help
+	  This driver provides support for the bidirectional parallel port
+	  found on many Sun machines. Note that many of the newer Ultras
+	  actually have pc style hardware instead.
+
+config PARPORT_AX88796
+	tristate "AX88796 Parallel Port"
+	select PARPORT_NOT_PC
+	help
+	  Say Y here if you need support for the parallel port hardware on
+	  the AX88796 network controller chip. This code is also available
+	  as a module (say M), called parport_ax88796.
+
+	  The driver is not dependent on the AX88796 network driver, and
+	  should not interfere with the networking functions of the chip.
+
+config PARPORT_1284
+	bool "IEEE 1284 transfer modes"
+	help
+	  If you have a printer that supports status readback or device ID, or
+	  want to use a device that uses enhanced parallel port transfer modes
+	  such as EPP and ECP, say Y here to enable advanced IEEE 1284
+	  transfer modes. Also say Y if you want device ID information to
+	  appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
+
+config PARPORT_NOT_PC
+	bool
+
+endif # PARPORT
diff --git a/drivers/parport/Makefile b/drivers/parport/Makefile
new file mode 100644
index 00000000..696b8d4c
--- /dev/null
+++ b/drivers/parport/Makefile
@@ -0,0 +1,21 @@
+#
+# Makefile for the kernel Parallel port device drivers.
+#
+
+parport-objs	:= share.o ieee1284.o ieee1284_ops.o procfs.o
+
+ifeq ($(CONFIG_PARPORT_1284),y)
+	parport-objs	+= daisy.o probe.o
+endif
+
+obj-$(CONFIG_PARPORT)		+= parport.o
+obj-$(CONFIG_PARPORT_PC)	+= parport_pc.o
+obj-$(CONFIG_PARPORT_SERIAL)	+= parport_serial.o
+obj-$(CONFIG_PARPORT_PC_PCMCIA) += parport_cs.o
+obj-$(CONFIG_PARPORT_AMIGA)	+= parport_amiga.o
+obj-$(CONFIG_PARPORT_MFC3)	+= parport_mfc3.o
+obj-$(CONFIG_PARPORT_ATARI)	+= parport_atari.o
+obj-$(CONFIG_PARPORT_SUNBPP)	+= parport_sunbpp.o
+obj-$(CONFIG_PARPORT_GSC)	+= parport_gsc.o
+obj-$(CONFIG_PARPORT_AX88796)	+= parport_ax88796.o
+obj-$(CONFIG_PARPORT_IP32)	+= parport_ip32.o
\ No newline at end of file
diff --git a/drivers/parport/TODO-parport b/drivers/parport/TODO-parport
new file mode 100644
index 00000000..089b14ee
--- /dev/null
+++ b/drivers/parport/TODO-parport
@@ -0,0 +1,20 @@
+Things to be done.
+
+0. Fix the bugs (see BUGS-parport).
+
+1. Proper documentation.
+
+2. A better lp.c:
+
+   a) ECP support would be nice.  This can only work if both the port and
+      the printer support it.
+
+   b) Handle status readback automatically.  IEEE1284 printers can post status
+      bits when they have something to say.  We should read out and deal 
+      with (maybe just log) whatever the printer wants to tell the world.
+
+3. Support more hardware (eg m68k, Sun bpp).
+
+4. A better PLIP (make use of bidirectional/ECP/EPP ports).
+
+See <URL:http://people.redhat.com/twaugh/parport/>.
diff --git a/drivers/parport/daisy.c b/drivers/parport/daisy.c
new file mode 100644
index 00000000..5bed17f6
--- /dev/null
+++ b/drivers/parport/daisy.c
@@ -0,0 +1,482 @@
+/*
+ * IEEE 1284.3 Parallel port daisy chain and multiplexor code
+ * 
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * ??-12-1998: Initial implementation.
+ * 31-01-1999: Make port-cloning transparent.
+ * 13-02-1999: Move DeviceID technique from parport_probe.
+ * 13-03-1999: Get DeviceID from non-IEEE 1284.3 devices too.
+ * 22-02-2000: Count devices that are actually detected.
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+#include <asm/current.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk(stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+static struct daisydev {
+	struct daisydev *next;
+	struct parport *port;
+	int daisy;
+	int devnum;
+} *topology = NULL;
+static DEFINE_SPINLOCK(topology_lock);
+
+static int numdevs = 0;
+
+/* Forward-declaration of lower-level functions. */
+static int mux_present(struct parport *port);
+static int num_mux_ports(struct parport *port);
+static int select_port(struct parport *port);
+static int assign_addrs(struct parport *port);
+
+/* Add a device to the discovered topology. */
+static void add_dev(int devnum, struct parport *port, int daisy)
+{
+	struct daisydev *newdev, **p;
+	newdev = kmalloc(sizeof(struct daisydev), GFP_KERNEL);
+	if (newdev) {
+		newdev->port = port;
+		newdev->daisy = daisy;
+		newdev->devnum = devnum;
+		spin_lock(&topology_lock);
+		for (p = &topology; *p && (*p)->devnum<devnum; p = &(*p)->next)
+			;
+		newdev->next = *p;
+		*p = newdev;
+		spin_unlock(&topology_lock);
+	}
+}
+
+/* Clone a parport (actually, make an alias). */
+static struct parport *clone_parport(struct parport *real, int muxport)
+{
+	struct parport *extra = parport_register_port(real->base,
+						       real->irq,
+						       real->dma,
+						       real->ops);
+	if (extra) {
+		extra->portnum = real->portnum;
+		extra->physport = real;
+		extra->muxport = muxport;
+		real->slaves[muxport-1] = extra;
+	}
+
+	return extra;
+}
+
+/* Discover the IEEE1284.3 topology on a port -- muxes and daisy chains.
+ * Return value is number of devices actually detected. */
+int parport_daisy_init(struct parport *port)
+{
+	int detected = 0;
+	char *deviceid;
+	static const char *th[] = { /*0*/"th", "st", "nd", "rd", "th" };
+	int num_ports;
+	int i;
+	int last_try = 0;
+
+again:
+	/* Because this is called before any other devices exist,
+	 * we don't have to claim exclusive access.  */
+
+	/* If mux present on normal port, need to create new
+	 * parports for each extra port. */
+	if (port->muxport < 0 && mux_present(port) &&
+	    /* don't be fooled: a mux must have 2 or 4 ports. */
+	    ((num_ports = num_mux_ports(port)) == 2 || num_ports == 4)) {
+		/* Leave original as port zero. */
+		port->muxport = 0;
+		printk(KERN_INFO
+			"%s: 1st (default) port of %d-way multiplexor\n",
+			port->name, num_ports);
+		for (i = 1; i < num_ports; i++) {
+			/* Clone the port. */
+			struct parport *extra = clone_parport(port, i);
+			if (!extra) {
+				if (signal_pending(current))
+					break;
+
+				schedule();
+				continue;
+			}
+
+			printk(KERN_INFO
+				"%s: %d%s port of %d-way multiplexor on %s\n",
+				extra->name, i + 1, th[i + 1], num_ports,
+				port->name);
+
+			/* Analyse that port too.  We won't recurse
+			   forever because of the 'port->muxport < 0'
+			   test above. */
+			parport_daisy_init(extra);
+		}
+	}
+
+	if (port->muxport >= 0)
+		select_port(port);
+
+	parport_daisy_deselect_all(port);
+	detected += assign_addrs(port);
+
+	/* Count the potential legacy device at the end. */
+	add_dev(numdevs++, port, -1);
+
+	/* Find out the legacy device's IEEE 1284 device ID. */
+	deviceid = kmalloc(1024, GFP_KERNEL);
+	if (deviceid) {
+		if (parport_device_id(numdevs - 1, deviceid, 1024) > 2)
+			detected++;
+
+		kfree(deviceid);
+	}
+
+	if (!detected && !last_try) {
+		/* No devices were detected.  Perhaps they are in some
+                   funny state; let's try to reset them and see if
+                   they wake up. */
+		parport_daisy_fini(port);
+		parport_write_control(port, PARPORT_CONTROL_SELECT);
+		udelay(50);
+		parport_write_control(port,
+				       PARPORT_CONTROL_SELECT |
+				       PARPORT_CONTROL_INIT);
+		udelay(50);
+		last_try = 1;
+		goto again;
+	}
+
+	return detected;
+}
+
+/* Forget about devices on a physical port. */
+void parport_daisy_fini(struct parport *port)
+{
+	struct daisydev **p;
+
+	spin_lock(&topology_lock);
+	p = &topology;
+	while (*p) {
+		struct daisydev *dev = *p;
+		if (dev->port != port) {
+			p = &dev->next;
+			continue;
+		}
+		*p = dev->next;
+		kfree(dev);
+	}
+
+	/* Gaps in the numbering could be handled better.  How should
+           someone enumerate through all IEEE1284.3 devices in the
+           topology?. */
+	if (!topology) numdevs = 0;
+	spin_unlock(&topology_lock);
+	return;
+}
+
+/**
+ *	parport_open - find a device by canonical device number
+ *	@devnum: canonical device number
+ *	@name: name to associate with the device
+ *
+ *	This function is similar to parport_register_device(), except
+ *	that it locates a device by its number rather than by the port
+ *	it is attached to.
+ *
+ *	All parameters except for @devnum are the same as for
+ *	parport_register_device().  The return value is the same as
+ *	for parport_register_device().
+ **/
+
+struct pardevice *parport_open(int devnum, const char *name)
+{
+	struct daisydev *p = topology;
+	struct parport *port;
+	struct pardevice *dev;
+	int daisy;
+
+	spin_lock(&topology_lock);
+	while (p && p->devnum != devnum)
+		p = p->next;
+
+	if (!p) {
+		spin_unlock(&topology_lock);
+		return NULL;
+	}
+
+	daisy = p->daisy;
+	port = parport_get_port(p->port);
+	spin_unlock(&topology_lock);
+
+	dev = parport_register_device(port, name, NULL, NULL, NULL, 0, NULL);
+	parport_put_port(port);
+	if (!dev)
+		return NULL;
+
+	dev->daisy = daisy;
+
+	/* Check that there really is a device to select. */
+	if (daisy >= 0) {
+		int selected;
+		parport_claim_or_block(dev);
+		selected = port->daisy;
+		parport_release(dev);
+
+		if (selected != daisy) {
+			/* No corresponding device. */
+			parport_unregister_device(dev);
+			return NULL;
+		}
+	}
+
+	return dev;
+}
+
+/**
+ *	parport_close - close a device opened with parport_open()
+ *	@dev: device to close
+ *
+ *	This is to parport_open() as parport_unregister_device() is to
+ *	parport_register_device().
+ **/
+
+void parport_close(struct pardevice *dev)
+{
+	parport_unregister_device(dev);
+}
+
+/* Send a daisy-chain-style CPP command packet. */
+static int cpp_daisy(struct parport *port, int cmd)
+{
+	unsigned char s;
+
+	parport_data_forward(port);
+	parport_write_data(port, 0xaa); udelay(2);
+	parport_write_data(port, 0x55); udelay(2);
+	parport_write_data(port, 0x00); udelay(2);
+	parport_write_data(port, 0xff); udelay(2);
+	s = parport_read_status(port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_BUSY
+		  | PARPORT_STATUS_PAPEROUT
+		  | PARPORT_STATUS_SELECT
+		  | PARPORT_STATUS_ERROR)) {
+		DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff(%02x)\n",
+			 port->name, s);
+		return -ENXIO;
+	}
+
+	parport_write_data(port, 0x87); udelay(2);
+	s = parport_read_status(port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
+		DPRINTK(KERN_DEBUG "%s: cpp_daisy: aa5500ff87(%02x)\n",
+			 port->name, s);
+		return -ENXIO;
+	}
+
+	parport_write_data(port, 0x78); udelay(2);
+	parport_write_data(port, cmd); udelay(2);
+	parport_frob_control(port,
+			      PARPORT_CONTROL_STROBE,
+			      PARPORT_CONTROL_STROBE);
+	udelay(1);
+	s = parport_read_status(port);
+	parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+	udelay(1);
+	parport_write_data(port, 0xff); udelay(2);
+
+	return s;
+}
+
+/* Send a mux-style CPP command packet. */
+static int cpp_mux(struct parport *port, int cmd)
+{
+	unsigned char s;
+	int rc;
+
+	parport_data_forward(port);
+	parport_write_data(port, 0xaa); udelay(2);
+	parport_write_data(port, 0x55); udelay(2);
+	parport_write_data(port, 0xf0); udelay(2);
+	parport_write_data(port, 0x0f); udelay(2);
+	parport_write_data(port, 0x52); udelay(2);
+	parport_write_data(port, 0xad); udelay(2);
+	parport_write_data(port, cmd); udelay(2);
+
+	s = parport_read_status(port);
+	if (!(s & PARPORT_STATUS_ACK)) {
+		DPRINTK(KERN_DEBUG "%s: cpp_mux: aa55f00f52ad%02x(%02x)\n",
+			 port->name, cmd, s);
+		return -EIO;
+	}
+
+	rc = (((s & PARPORT_STATUS_SELECT   ? 1 : 0) << 0) |
+	      ((s & PARPORT_STATUS_PAPEROUT ? 1 : 0) << 1) |
+	      ((s & PARPORT_STATUS_BUSY     ? 0 : 1) << 2) |
+	      ((s & PARPORT_STATUS_ERROR    ? 0 : 1) << 3));
+
+	return rc;
+}
+
+void parport_daisy_deselect_all(struct parport *port)
+{
+	cpp_daisy(port, 0x30);
+}
+
+int parport_daisy_select(struct parport *port, int daisy, int mode)
+{
+	switch (mode)
+	{
+		// For these modes we should switch to EPP mode:
+		case IEEE1284_MODE_EPP:
+		case IEEE1284_MODE_EPPSL:
+		case IEEE1284_MODE_EPPSWE:
+			return !(cpp_daisy(port, 0x20 + daisy) &
+				 PARPORT_STATUS_ERROR);
+
+		// For these modes we should switch to ECP mode:
+		case IEEE1284_MODE_ECP:
+		case IEEE1284_MODE_ECPRLE:
+		case IEEE1284_MODE_ECPSWE: 
+			return !(cpp_daisy(port, 0xd0 + daisy) &
+				 PARPORT_STATUS_ERROR);
+
+		// Nothing was told for BECP in Daisy chain specification.
+		// May be it's wise to use ECP?
+		case IEEE1284_MODE_BECP:
+		// Others use compat mode
+		case IEEE1284_MODE_NIBBLE:
+		case IEEE1284_MODE_BYTE:
+		case IEEE1284_MODE_COMPAT:
+		default:
+			return !(cpp_daisy(port, 0xe0 + daisy) &
+				 PARPORT_STATUS_ERROR);
+	}
+}
+
+static int mux_present(struct parport *port)
+{
+	return cpp_mux(port, 0x51) == 3;
+}
+
+static int num_mux_ports(struct parport *port)
+{
+	return cpp_mux(port, 0x58);
+}
+
+static int select_port(struct parport *port)
+{
+	int muxport = port->muxport;
+	return cpp_mux(port, 0x60 + muxport) == muxport;
+}
+
+static int assign_addrs(struct parport *port)
+{
+	unsigned char s;
+	unsigned char daisy;
+	int thisdev = numdevs;
+	int detected;
+	char *deviceid;
+
+	parport_data_forward(port);
+	parport_write_data(port, 0xaa); udelay(2);
+	parport_write_data(port, 0x55); udelay(2);
+	parport_write_data(port, 0x00); udelay(2);
+	parport_write_data(port, 0xff); udelay(2);
+	s = parport_read_status(port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_BUSY
+		  | PARPORT_STATUS_PAPEROUT
+		  | PARPORT_STATUS_SELECT
+		  | PARPORT_STATUS_ERROR)) {
+		DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff(%02x)\n",
+			 port->name, s);
+		return 0;
+	}
+
+	parport_write_data(port, 0x87); udelay(2);
+	s = parport_read_status(port) & (PARPORT_STATUS_BUSY
+					  | PARPORT_STATUS_PAPEROUT
+					  | PARPORT_STATUS_SELECT
+					  | PARPORT_STATUS_ERROR);
+	if (s != (PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR)) {
+		DPRINTK(KERN_DEBUG "%s: assign_addrs: aa5500ff87(%02x)\n",
+			 port->name, s);
+		return 0;
+	}
+
+	parport_write_data(port, 0x78); udelay(2);
+	s = parport_read_status(port);
+
+	for (daisy = 0;
+	     (s & (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT))
+		     == (PARPORT_STATUS_PAPEROUT|PARPORT_STATUS_SELECT)
+		     && daisy < 4;
+	     ++daisy) {
+		parport_write_data(port, daisy);
+		udelay(2);
+		parport_frob_control(port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay(1);
+		parport_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+		udelay(1);
+
+		add_dev(numdevs++, port, daisy);
+
+		/* See if this device thought it was the last in the
+		 * chain. */
+		if (!(s & PARPORT_STATUS_BUSY))
+			break;
+
+		/* We are seeing pass through status now. We see
+		   last_dev from next device or if last_dev does not
+		   work status lines from some non-daisy chain
+		   device. */
+		s = parport_read_status(port);
+	}
+
+	parport_write_data(port, 0xff); udelay(2);
+	detected = numdevs - thisdev;
+	DPRINTK(KERN_DEBUG "%s: Found %d daisy-chained devices\n", port->name,
+		 detected);
+
+	/* Ask the new devices to introduce themselves. */
+	deviceid = kmalloc(1024, GFP_KERNEL);
+	if (!deviceid) return 0;
+
+	for (daisy = 0; thisdev < numdevs; thisdev++, daisy++)
+		parport_device_id(thisdev, deviceid, 1024);
+
+	kfree(deviceid);
+	return detected;
+}
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
new file mode 100644
index 00000000..f9fd4b33
--- /dev/null
+++ b/drivers/parport/ieee1284.c
@@ -0,0 +1,817 @@
+/*
+ * IEEE-1284 implementation for parport.
+ *
+ * Authors: Phil Blundell <philb@gnu.org>
+ *          Carsten Gross <carsten@sol.wohnheim.uni-ulm.de>
+ *	    Jose Renau <renau@acm.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk> (largely rewritten)
+ *
+ * This file is responsible for IEEE 1284 negotiation, and for handing
+ * read/write requests to low-level drivers.
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ *
+ * Various hacks, Fred Barnes <frmb2@ukc.ac.uk>, 04/2000
+ */
+
+#include <linux/module.h>
+#include <linux/threads.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+
+#undef DEBUG /* undef me for production */
+
+#ifdef CONFIG_LP_CONSOLE
+#undef DEBUG /* Don't want a garbled console */
+#endif
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+/* Make parport_wait_peripheral wake up.
+ * It will be useful to call this from an interrupt handler. */
+static void parport_ieee1284_wakeup (struct parport *port)
+{
+	up (&port->physport->ieee1284.irq);
+}
+
+static struct parport *port_from_cookie[PARPORT_MAX];
+static void timeout_waiting_on_port (unsigned long cookie)
+{
+	parport_ieee1284_wakeup (port_from_cookie[cookie % PARPORT_MAX]);
+}
+
+/**
+ *	parport_wait_event - wait for an event on a parallel port
+ *	@port: port to wait on
+ *	@timeout: time to wait (in jiffies)
+ *
+ *	This function waits for up to @timeout jiffies for an
+ *	interrupt to occur on a parallel port.  If the port timeout is
+ *	set to zero, it returns immediately.
+ *
+ *	If an interrupt occurs before the timeout period elapses, this
+ *	function returns zero immediately.  If it times out, it returns
+ *	one.  An error code less than zero indicates an error (most
+ *	likely a pending signal), and the calling code should finish
+ *	what it's doing as soon as it can.
+ */
+
+int parport_wait_event (struct parport *port, signed long timeout)
+{
+	int ret;
+	struct timer_list timer;
+
+	if (!port->physport->cad->timeout)
+		/* Zero timeout is special, and we can't down() the
+		   semaphore. */
+		return 1;
+
+	init_timer_on_stack(&timer);
+	timer.expires = jiffies + timeout;
+	timer.function = timeout_waiting_on_port;
+	port_from_cookie[port->number % PARPORT_MAX] = port;
+	timer.data = port->number;
+
+	add_timer (&timer);
+	ret = down_interruptible (&port->physport->ieee1284.irq);
+	if (!del_timer_sync(&timer) && !ret)
+		/* Timed out. */
+		ret = 1;
+
+	destroy_timer_on_stack(&timer);
+
+	return ret;
+}
+
+/**
+ *	parport_poll_peripheral - poll status lines
+ *	@port: port to watch
+ *	@mask: status lines to watch
+ *	@result: desired values of chosen status lines
+ *	@usec: timeout
+ *
+ *	This function busy-waits until the masked status lines have
+ *	the desired values, or until the timeout period elapses.  The
+ *	@mask and @result parameters are bitmasks, with the bits
+ *	defined by the constants in parport.h: %PARPORT_STATUS_BUSY,
+ *	and so on.
+ *
+ *	This function does not call schedule(); instead it busy-waits
+ *	using udelay().  It currently has a resolution of 5usec.
+ *
+ *	If the status lines take on the desired values before the
+ *	timeout period elapses, parport_poll_peripheral() returns zero
+ *	immediately.  A return value greater than zero indicates
+ *	a timeout.  An error code (less than zero) indicates an error,
+ *	most likely a signal that arrived, and the caller should
+ *	finish what it is doing as soon as possible.
+*/
+
+int parport_poll_peripheral(struct parport *port,
+			    unsigned char mask,
+			    unsigned char result,
+			    int usec)
+{
+	/* Zero return code is success, >0 is timeout. */
+	int count = usec / 5 + 2;
+	int i;
+	unsigned char status;
+	for (i = 0; i < count; i++) {
+		status = parport_read_status (port);
+		if ((status & mask) == result)
+			return 0;
+		if (signal_pending (current))
+			return -EINTR;
+		if (need_resched())
+			break;
+		if (i >= 2)
+			udelay (5);
+	}
+
+	return 1;
+}
+
+/**
+ *	parport_wait_peripheral - wait for status lines to change in 35ms
+ *	@port: port to watch
+ *	@mask: status lines to watch
+ *	@result: desired values of chosen status lines
+ *
+ *	This function waits until the masked status lines have the
+ *	desired values, or until 35ms have elapsed (see IEEE 1284-1994
+ *	page 24 to 25 for why this value in particular is hardcoded).
+ *	The @mask and @result parameters are bitmasks, with the bits
+ *	defined by the constants in parport.h: %PARPORT_STATUS_BUSY,
+ *	and so on.
+ *
+ *	The port is polled quickly to start off with, in anticipation
+ *	of a fast response from the peripheral.  This fast polling
+ *	time is configurable (using /proc), and defaults to 500usec.
+ *	If the timeout for this port (see parport_set_timeout()) is
+ *	zero, the fast polling time is 35ms, and this function does
+ *	not call schedule().
+ *
+ *	If the timeout for this port is non-zero, after the fast
+ *	polling fails it uses parport_wait_event() to wait for up to
+ *	10ms, waking up if an interrupt occurs.
+ */
+
+int parport_wait_peripheral(struct parport *port,
+			    unsigned char mask, 
+			    unsigned char result)
+{
+	int ret;
+	int usec;
+	unsigned long deadline;
+	unsigned char status;
+
+	usec = port->physport->spintime; /* usecs of fast polling */
+	if (!port->physport->cad->timeout)
+		/* A zero timeout is "special": busy wait for the
+		   entire 35ms. */
+		usec = 35000;
+
+	/* Fast polling.
+	 *
+	 * This should be adjustable.
+	 * How about making a note (in the device structure) of how long
+	 * it takes, so we know for next time?
+	 */
+	ret = parport_poll_peripheral (port, mask, result, usec);
+	if (ret != 1)
+		return ret;
+
+	if (!port->physport->cad->timeout)
+		/* We may be in an interrupt handler, so we can't poll
+		 * slowly anyway. */
+		return 1;
+
+	/* 40ms of slow polling. */
+	deadline = jiffies + msecs_to_jiffies(40);
+	while (time_before (jiffies, deadline)) {
+		if (signal_pending (current))
+			return -EINTR;
+
+		/* Wait for 10ms (or until an interrupt occurs if
+		 * the handler is set) */
+		if ((ret = parport_wait_event (port, msecs_to_jiffies(10))) < 0)
+			return ret;
+
+		status = parport_read_status (port);
+		if ((status & mask) == result)
+			return 0;
+
+		if (!ret) {
+			/* parport_wait_event didn't time out, but the
+			 * peripheral wasn't actually ready either.
+			 * Wait for another 10ms. */
+			schedule_timeout_interruptible(msecs_to_jiffies(10));
+		}
+	}
+
+	return 1;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Terminate a negotiated mode. */
+static void parport_ieee1284_terminate (struct parport *port)
+{
+	int r;
+	port = port->physport;
+
+	/* EPP terminates differently. */
+	switch (port->ieee1284.mode) {
+	case IEEE1284_MODE_EPP:
+	case IEEE1284_MODE_EPPSL:
+	case IEEE1284_MODE_EPPSWE:
+		/* Terminate from EPP mode. */
+
+		/* Event 68: Set nInit low */
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		udelay (50);
+
+		/* Event 69: Set nInit high, nSelectIn low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_INIT);
+		break;
+
+	case IEEE1284_MODE_ECP:
+	case IEEE1284_MODE_ECPRLE:
+	case IEEE1284_MODE_ECPSWE:
+		/* In ECP we can only terminate from fwd idle phase. */
+		if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+			/* Event 47: Set nInit high */
+			parport_frob_control (port,
+					      PARPORT_CONTROL_INIT
+					      | PARPORT_CONTROL_AUTOFD,
+					      PARPORT_CONTROL_INIT
+					      | PARPORT_CONTROL_AUTOFD);
+
+			/* Event 49: PError goes high */
+			r = parport_wait_peripheral (port,
+						     PARPORT_STATUS_PAPEROUT,
+						     PARPORT_STATUS_PAPEROUT);
+			if (r)
+				DPRINTK (KERN_INFO "%s: Timeout at event 49\n",
+					 port->name);
+
+			parport_data_forward (port);
+			DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+				 port->name);
+			port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+		}
+
+		/* fall-though.. */
+
+	default:
+		/* Terminate from all other modes. */
+
+		/* Event 22: Set nSelectIn low, nAutoFd high */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 24: nAck goes low */
+		r = parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0);
+		if (r)
+			DPRINTK (KERN_INFO "%s: Timeout at event 24\n",
+				 port->name);
+
+		/* Event 25: Set nAutoFd low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 27: nAck goes high */
+		r = parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK, 
+					     PARPORT_STATUS_ACK);
+		if (r)
+			DPRINTK (KERN_INFO "%s: Timeout at event 27\n",
+				 port->name);
+
+		/* Event 29: Set nAutoFd high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+	}
+
+	port->ieee1284.mode = IEEE1284_MODE_COMPAT;
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	DPRINTK (KERN_DEBUG "%s: In compatibility (forward idle) mode\n",
+		 port->name);
+}		
+#endif /* IEEE1284 support */
+
+/**
+ *	parport_negotiate - negotiate an IEEE 1284 mode
+ *	@port: port to use
+ *	@mode: mode to negotiate to
+ *
+ *	Use this to negotiate to a particular IEEE 1284 transfer mode.
+ *	The @mode parameter should be one of the constants in
+ *	parport.h starting %IEEE1284_MODE_xxx.
+ *
+ *	The return value is 0 if the peripheral has accepted the
+ *	negotiation to the mode specified, -1 if the peripheral is not
+ *	IEEE 1284 compliant (or not present), or 1 if the peripheral
+ *	has rejected the negotiation.
+ */
+
+int parport_negotiate (struct parport *port, int mode)
+{
+#ifndef CONFIG_PARPORT_1284
+	if (mode == IEEE1284_MODE_COMPAT)
+		return 0;
+	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	return -1;
+#else
+	int m = mode & ~IEEE1284_ADDR;
+	int r;
+	unsigned char xflag;
+
+	port = port->physport;
+
+	/* Is there anything to do? */
+	if (port->ieee1284.mode == mode)
+		return 0;
+
+	/* Is the difference just an address-or-not bit? */
+	if ((port->ieee1284.mode & ~IEEE1284_ADDR) == (mode & ~IEEE1284_ADDR)){
+		port->ieee1284.mode = mode;
+		return 0;
+	}
+
+	/* Go to compatibility forward idle mode */
+	if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
+		parport_ieee1284_terminate (port);
+
+	if (mode == IEEE1284_MODE_COMPAT)
+		/* Compatibility mode: no negotiation. */
+		return 0; 
+
+	switch (mode) {
+	case IEEE1284_MODE_ECPSWE:
+		m = IEEE1284_MODE_ECP;
+		break;
+	case IEEE1284_MODE_EPPSL:
+	case IEEE1284_MODE_EPPSWE:
+		m = IEEE1284_MODE_EPP;
+		break;
+	case IEEE1284_MODE_BECP:
+		return -ENOSYS; /* FIXME (implement BECP) */
+	}
+
+	if (mode & IEEE1284_EXT_LINK)
+		m = 1<<7; /* request extensibility link */
+
+	port->ieee1284.phase = IEEE1284_PH_NEGOTIATION;
+
+	/* Start off with nStrobe and nAutoFd high, and nSelectIn low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_SELECT,
+			      PARPORT_CONTROL_SELECT);
+	udelay(1);
+
+	/* Event 0: Set data */
+	parport_data_forward (port);
+	parport_write_data (port, m);
+	udelay (400); /* Shouldn't need to wait this long. */
+
+	/* Event 1: Set nSelectIn high, nAutoFd low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_SELECT
+			      | PARPORT_CONTROL_AUTOFD,
+			      PARPORT_CONTROL_AUTOFD);
+
+	/* Event 2: PError, Select, nFault go high, nAck goes low */
+	if (parport_wait_peripheral (port,
+				     PARPORT_STATUS_ERROR
+				     | PARPORT_STATUS_SELECT
+				     | PARPORT_STATUS_PAPEROUT
+				     | PARPORT_STATUS_ACK,
+				     PARPORT_STATUS_ERROR
+				     | PARPORT_STATUS_SELECT
+				     | PARPORT_STATUS_PAPEROUT)) {
+		/* Timeout */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_SELECT
+				      | PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_SELECT);
+		DPRINTK (KERN_DEBUG
+			 "%s: Peripheral not IEEE1284 compliant (0x%02X)\n",
+			 port->name, parport_read_status (port));
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+		return -1; /* Not IEEE1284 compliant */
+	}
+
+	/* Event 3: Set nStrobe low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE,
+			      PARPORT_CONTROL_STROBE);
+
+	/* Event 4: Set nStrobe and nAutoFd high */
+	udelay (5);
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_AUTOFD,
+			      0);
+
+	/* Event 6: nAck goes high */
+	if (parport_wait_peripheral (port,
+				     PARPORT_STATUS_ACK,
+				     PARPORT_STATUS_ACK)) {
+		/* This shouldn't really happen with a compliant device. */
+		DPRINTK (KERN_DEBUG
+			 "%s: Mode 0x%02x not supported? (0x%02x)\n",
+			 port->name, mode, port->ops->read_status (port));
+		parport_ieee1284_terminate (port);
+		return 1;
+	}
+
+	xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
+
+	/* xflag should be high for all modes other than nibble (0). */
+	if (mode && !xflag) {
+		/* Mode not supported. */
+		DPRINTK (KERN_DEBUG "%s: Mode 0x%02x rejected by peripheral\n",
+			 port->name, mode);
+		parport_ieee1284_terminate (port);
+		return 1;
+	}
+
+	/* More to do if we've requested extensibility link. */
+	if (mode & IEEE1284_EXT_LINK) {
+		m = mode & 0x7f;
+		udelay (1);
+		parport_write_data (port, m);
+		udelay (1);
+
+		/* Event 51: Set nStrobe low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+
+		/* Event 52: nAck goes low */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+			/* This peripheral is _very_ slow. */
+			DPRINTK (KERN_DEBUG
+				 "%s: Event 52 didn't happen\n",
+				 port->name);
+			parport_ieee1284_terminate (port);
+			return 1;
+		}
+
+		/* Event 53: Set nStrobe high */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      0);
+
+		/* Event 55: nAck goes high */
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* This shouldn't really happen with a compliant
+			 * device. */
+			DPRINTK (KERN_DEBUG
+				 "%s: Mode 0x%02x not supported? (0x%02x)\n",
+				 port->name, mode,
+				 port->ops->read_status (port));
+			parport_ieee1284_terminate (port);
+			return 1;
+		}
+
+		/* Event 54: Peripheral sets XFlag to reflect support */
+		xflag = parport_read_status (port) & PARPORT_STATUS_SELECT;
+
+		/* xflag should be high. */
+		if (!xflag) {
+			/* Extended mode not supported. */
+			DPRINTK (KERN_DEBUG "%s: Extended mode 0x%02x not "
+				 "supported\n", port->name, mode);
+			parport_ieee1284_terminate (port);
+			return 1;
+		}
+
+		/* Any further setup is left to the caller. */
+	}
+
+	/* Mode is supported */
+	DPRINTK (KERN_DEBUG "%s: In mode 0x%02x\n", port->name, mode);
+	port->ieee1284.mode = mode;
+
+	/* But ECP is special */
+	if (!(mode & IEEE1284_EXT_LINK) && (m & IEEE1284_MODE_ECP)) {
+		port->ieee1284.phase = IEEE1284_PH_ECP_SETUP;
+
+		/* Event 30: Set nAutoFd low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 31: PError goes high. */
+		r = parport_wait_peripheral (port,
+					     PARPORT_STATUS_PAPEROUT,
+					     PARPORT_STATUS_PAPEROUT);
+		if (r) {
+			DPRINTK (KERN_INFO "%s: Timeout at event 31\n",
+				port->name);
+		}
+
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+			 port->name);
+	} else switch (mode) {
+	case IEEE1284_MODE_NIBBLE:
+	case IEEE1284_MODE_BYTE:
+		port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+		break;
+	default:
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+	}
+
+
+	return 0;
+#endif /* IEEE1284 support */
+}
+
+/* Acknowledge that the peripheral has data available.
+ * Events 18-20, in order to get from Reverse Idle phase
+ * to Host Busy Data Available.
+ * This will most likely be called from an interrupt.
+ * Returns zero if data was available.
+ */
+#ifdef CONFIG_PARPORT_1284
+static int parport_ieee1284_ack_data_avail (struct parport *port)
+{
+	if (parport_read_status (port) & PARPORT_STATUS_ERROR)
+		/* Event 18 didn't happen. */
+		return -1;
+
+	/* Event 20: nAutoFd goes high. */
+	port->ops->frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+	port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+	return 0;
+}
+#endif /* IEEE1284 support */
+
+/* Handle an interrupt. */
+void parport_ieee1284_interrupt (void *handle)
+{
+	struct parport *port = handle;
+	parport_ieee1284_wakeup (port);
+
+#ifdef CONFIG_PARPORT_1284
+	if (port->ieee1284.phase == IEEE1284_PH_REV_IDLE) {
+		/* An interrupt in this phase means that data
+		 * is now available. */
+		DPRINTK (KERN_DEBUG "%s: Data available\n", port->name);
+		parport_ieee1284_ack_data_avail (port);
+	}
+#endif /* IEEE1284 support */
+}
+
+/**
+ *	parport_write - write a block of data to a parallel port
+ *	@port: port to write to
+ *	@buffer: data buffer (in kernel space)
+ *	@len: number of bytes of data to transfer
+ *
+ *	This will write up to @len bytes of @buffer to the port
+ *	specified, using the IEEE 1284 transfer mode most recently
+ *	negotiated to (using parport_negotiate()), as long as that
+ *	mode supports forward transfers (host to peripheral).
+ *
+ *	It is the caller's responsibility to ensure that the first
+ *	@len bytes of @buffer are valid.
+ *
+ *	This function returns the number of bytes transferred (if zero
+ *	or positive), or else an error code.
+ */
+
+ssize_t parport_write (struct parport *port, const void *buffer, size_t len)
+{
+#ifndef CONFIG_PARPORT_1284
+	return port->ops->compat_write_data (port, buffer, len, 0);
+#else
+	ssize_t retval;
+	int mode = port->ieee1284.mode;
+	int addr = mode & IEEE1284_ADDR;
+	size_t (*fn) (struct parport *, const void *, size_t, int);
+
+	/* Ignore the device-ID-request bit and the address bit. */
+	mode &= ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
+
+	/* Use the mode we're in. */
+	switch (mode) {
+	case IEEE1284_MODE_NIBBLE:
+	case IEEE1284_MODE_BYTE:
+		parport_negotiate (port, IEEE1284_MODE_COMPAT);
+	case IEEE1284_MODE_COMPAT:
+		DPRINTK (KERN_DEBUG "%s: Using compatibility mode\n",
+			 port->name);
+		fn = port->ops->compat_write_data;
+		break;
+
+	case IEEE1284_MODE_EPP:
+		DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+		if (addr) {
+			fn = port->ops->epp_write_addr;
+		} else {
+			fn = port->ops->epp_write_data;
+		}
+		break;
+	case IEEE1284_MODE_EPPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
+			port->name);
+		if (addr) {
+			fn = parport_ieee1284_epp_write_addr;
+		} else {
+			fn = parport_ieee1284_epp_write_data;
+		}
+		break;
+	case IEEE1284_MODE_ECP:
+	case IEEE1284_MODE_ECPRLE:
+		DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+		if (addr) {
+			fn = port->ops->ecp_write_addr;
+		} else {
+			fn = port->ops->ecp_write_data;
+		}
+		break;
+
+	case IEEE1284_MODE_ECPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
+			 port->name);
+		/* The caller has specified that it must be emulated,
+		 * even if we have ECP hardware! */
+		if (addr) {
+			fn = parport_ieee1284_ecp_write_addr;
+		} else {
+			fn = parport_ieee1284_ecp_write_data;
+		}
+		break;
+
+	default:
+		DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
+			port->ieee1284.mode);
+		return -ENOSYS;
+	}
+
+	retval = (*fn) (port, buffer, len, 0);
+	DPRINTK (KERN_DEBUG "%s: wrote %d/%d bytes\n", port->name, retval, len);
+	return retval;
+#endif /* IEEE1284 support */
+}
+
+/**
+ *	parport_read - read a block of data from a parallel port
+ *	@port: port to read from
+ *	@buffer: data buffer (in kernel space)
+ *	@len: number of bytes of data to transfer
+ *
+ *	This will read up to @len bytes of @buffer to the port
+ *	specified, using the IEEE 1284 transfer mode most recently
+ *	negotiated to (using parport_negotiate()), as long as that
+ *	mode supports reverse transfers (peripheral to host).
+ *
+ *	It is the caller's responsibility to ensure that the first
+ *	@len bytes of @buffer are available to write to.
+ *
+ *	This function returns the number of bytes transferred (if zero
+ *	or positive), or else an error code.
+ */
+
+ssize_t parport_read (struct parport *port, void *buffer, size_t len)
+{
+#ifndef CONFIG_PARPORT_1284
+	printk (KERN_ERR "parport: IEEE1284 not supported in this kernel\n");
+	return -ENODEV;
+#else
+	int mode = port->physport->ieee1284.mode;
+	int addr = mode & IEEE1284_ADDR;
+	size_t (*fn) (struct parport *, void *, size_t, int);
+
+	/* Ignore the device-ID-request bit and the address bit. */
+	mode &= ~(IEEE1284_DEVICEID | IEEE1284_ADDR);
+
+	/* Use the mode we're in. */
+	switch (mode) {
+	case IEEE1284_MODE_COMPAT:
+		/* if we can tri-state use BYTE mode instead of NIBBLE mode,
+		 * if that fails, revert to NIBBLE mode -- ought to store somewhere
+		 * the device's ability to do BYTE mode reverse transfers, so we don't
+		 * end up needlessly calling negotiate(BYTE) repeately..  (fb)
+		 */
+		if ((port->physport->modes & PARPORT_MODE_TRISTATE) &&
+		    !parport_negotiate (port, IEEE1284_MODE_BYTE)) {
+			/* got into BYTE mode OK */
+			DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+			fn = port->ops->byte_read_data;
+			break;
+		}
+		if (parport_negotiate (port, IEEE1284_MODE_NIBBLE)) {
+			return -EIO;
+		}
+		/* fall through to NIBBLE */
+	case IEEE1284_MODE_NIBBLE:
+		DPRINTK (KERN_DEBUG "%s: Using nibble mode\n", port->name);
+		fn = port->ops->nibble_read_data;
+		break;
+
+	case IEEE1284_MODE_BYTE:
+		DPRINTK (KERN_DEBUG "%s: Using byte mode\n", port->name);
+		fn = port->ops->byte_read_data;
+		break;
+
+	case IEEE1284_MODE_EPP:
+		DPRINTK (KERN_DEBUG "%s: Using EPP mode\n", port->name);
+		if (addr) {
+			fn = port->ops->epp_read_addr;
+		} else {
+			fn = port->ops->epp_read_data;
+		}
+		break;
+	case IEEE1284_MODE_EPPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated EPP mode\n",
+			port->name);
+		if (addr) {
+			fn = parport_ieee1284_epp_read_addr;
+		} else {
+			fn = parport_ieee1284_epp_read_data;
+		}
+		break;
+	case IEEE1284_MODE_ECP:
+	case IEEE1284_MODE_ECPRLE:
+		DPRINTK (KERN_DEBUG "%s: Using ECP mode\n", port->name);
+		fn = port->ops->ecp_read_data;
+		break;
+
+	case IEEE1284_MODE_ECPSWE:
+		DPRINTK (KERN_DEBUG "%s: Using software-emulated ECP mode\n",
+			 port->name);
+		fn = parport_ieee1284_ecp_read_data;
+		break;
+
+	default:
+		DPRINTK (KERN_DEBUG "%s: Unknown mode 0x%02x\n", port->name,
+			 port->physport->ieee1284.mode);
+		return -ENOSYS;
+	}
+
+	return (*fn) (port, buffer, len, 0);
+#endif /* IEEE1284 support */
+}
+
+/**
+ *	parport_set_timeout - set the inactivity timeout for a device
+ *	@dev: device on a port
+ *	@inactivity: inactivity timeout (in jiffies)
+ *
+ *	This sets the inactivity timeout for a particular device on a
+ *	port.  This affects functions like parport_wait_peripheral().
+ *	The special value 0 means not to call schedule() while dealing
+ *	with this device.
+ *
+ *	The return value is the previous inactivity timeout.
+ *
+ *	Any callers of parport_wait_event() for this device are woken
+ *	up.
+ */
+
+long parport_set_timeout (struct pardevice *dev, long inactivity)
+{
+	long int old = dev->timeout;
+
+	dev->timeout = inactivity;
+
+	if (dev->port->physport->cad == dev)
+		parport_ieee1284_wakeup (dev->port);
+
+	return old;
+}
+
+/* Exported symbols for modules. */
+
+EXPORT_SYMBOL(parport_negotiate);
+EXPORT_SYMBOL(parport_write);
+EXPORT_SYMBOL(parport_read);
+EXPORT_SYMBOL(parport_wait_peripheral);
+EXPORT_SYMBOL(parport_wait_event);
+EXPORT_SYMBOL(parport_set_timeout);
+EXPORT_SYMBOL(parport_ieee1284_interrupt);
diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
new file mode 100644
index 00000000..2e21af43
--- /dev/null
+++ b/drivers/parport/ieee1284_ops.c
@@ -0,0 +1,914 @@
+/* IEEE-1284 operations for parport.
+ *
+ * This file is for generic IEEE 1284 operations.  The idea is that
+ * they are used by the low-level drivers.  If they have a special way
+ * of doing something, they can provide their own routines (and put
+ * the function pointers in port->ops); if not, they can just use these
+ * as a fallback.
+ *
+ * Note: Make no assumptions about hardware or architecture in this file!
+ *
+ * Author: Tim Waugh <tim@cyberelk.demon.co.uk>
+ * Fixed AUTOFD polarity in ecp_forward_to_reverse().  Fred Barnes, 1999
+ * Software emulated EPP fixes, Fred Barnes, 04/2001.
+ */
+
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG /* undef me for production */
+
+#ifdef CONFIG_LP_CONSOLE
+#undef DEBUG /* Don't want a garbled console */
+#endif
+
+#ifdef DEBUG
+#define DPRINTK(stuff...) printk (stuff)
+#else
+#define DPRINTK(stuff...)
+#endif
+
+/***                                *
+ * One-way data transfer functions. *
+ *                                ***/
+
+/* Compatibility mode. */
+size_t parport_ieee1284_write_compat (struct parport *port,
+				      const void *buffer, size_t len,
+				      int flags)
+{
+	int no_irq = 1;
+	ssize_t count = 0;
+	const unsigned char *addr = buffer;
+	unsigned char byte;
+	struct pardevice *dev = port->physport->cad;
+	unsigned char ctl = (PARPORT_CONTROL_SELECT
+			     | PARPORT_CONTROL_INIT);
+
+	if (port->irq != PARPORT_IRQ_NONE) {
+		parport_enable_irq (port);
+		no_irq = 0;
+	}
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+	parport_write_control (port, ctl);
+	parport_data_forward (port);
+	while (count < len) {
+		unsigned long expire = jiffies + dev->timeout;
+		long wait = msecs_to_jiffies(10);
+		unsigned char mask = (PARPORT_STATUS_ERROR
+				      | PARPORT_STATUS_BUSY);
+		unsigned char val = (PARPORT_STATUS_ERROR
+				     | PARPORT_STATUS_BUSY);
+
+		/* Wait until the peripheral's ready */
+		do {
+			/* Is the peripheral ready yet? */
+			if (!parport_wait_peripheral (port, mask, val))
+				/* Skip the loop */
+				goto ready;
+
+			/* Is the peripheral upset? */
+			if ((parport_read_status (port) &
+			     (PARPORT_STATUS_PAPEROUT |
+			      PARPORT_STATUS_SELECT |
+			      PARPORT_STATUS_ERROR))
+			    != (PARPORT_STATUS_SELECT |
+				PARPORT_STATUS_ERROR))
+				/* If nFault is asserted (i.e. no
+				 * error) and PAPEROUT and SELECT are
+				 * just red herrings, give the driver
+				 * a chance to check it's happy with
+				 * that before continuing. */
+				goto stop;
+
+			/* Have we run out of time? */
+			if (!time_before (jiffies, expire))
+				break;
+
+			/* Yield the port for a while.  If this is the
+                           first time around the loop, don't let go of
+                           the port.  This way, we find out if we have
+                           our interrupt handler called. */
+			if (count && no_irq) {
+				parport_release (dev);
+				schedule_timeout_interruptible(wait);
+				parport_claim_or_block (dev);
+			}
+			else
+				/* We must have the device claimed here */
+				parport_wait_event (port, wait);
+
+			/* Is there a signal pending? */
+			if (signal_pending (current))
+				break;
+
+			/* Wait longer next time. */
+			wait *= 2;
+		} while (time_before (jiffies, expire));
+
+		if (signal_pending (current))
+			break;
+
+		DPRINTK (KERN_DEBUG "%s: Timed out\n", port->name);
+		break;
+
+	ready:
+		/* Write the character to the data lines. */
+		byte = *addr++;
+		parport_write_data (port, byte);
+		udelay (1);
+
+		/* Pulse strobe. */
+		parport_write_control (port, ctl | PARPORT_CONTROL_STROBE);
+		udelay (1); /* strobe */
+
+		parport_write_control (port, ctl);
+		udelay (1); /* hold */
+
+		/* Assume the peripheral received it. */
+		count++;
+
+                /* Let another process run if it needs to. */
+		if (time_before (jiffies, expire))
+			if (!parport_yield_blocking (dev)
+			    && need_resched())
+				schedule ();
+	}
+ stop:
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return count;
+}
+
+/* Nibble mode. */
+size_t parport_ieee1284_read_nibble (struct parport *port, 
+				     void *buffer, size_t len,
+				     int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	unsigned char *buf = buffer;
+	int i;
+	unsigned char byte = 0;
+
+	len *= 2; /* in nibbles */
+	for (i=0; i < len; i++) {
+		unsigned char nibble;
+
+		/* Does the error line indicate end of data? */
+		if (((i & 1) == 0) &&
+		    (parport_read_status(port) & PARPORT_STATUS_ERROR)) {
+			goto end_of_data;
+		}
+
+		/* Event 7: Set nAutoFd low. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 9: nAck goes low. */
+		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK, 0)) {
+			/* Timeout -- no more data? */
+			DPRINTK (KERN_DEBUG
+				 "%s: Nibble timeout at event 9 (%d bytes)\n",
+				 port->name, i/2);
+			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+			break;
+		}
+
+
+		/* Read a nibble. */
+		nibble = parport_read_status (port) >> 3;
+		nibble &= ~8;
+		if ((nibble & 0x10) == 0)
+			nibble |= 8;
+		nibble &= 0xf;
+
+		/* Event 10: Set nAutoFd high. */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 11: nAck goes high. */
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* Timeout -- no more data? */
+			DPRINTK (KERN_DEBUG
+				 "%s: Nibble timeout at event 11\n",
+				 port->name);
+			break;
+		}
+
+		if (i & 1) {
+			/* Second nibble */
+			byte |= nibble << 4;
+			*buf++ = byte;
+		} else 
+			byte = nibble;
+	}
+
+	if (i == len) {
+		/* Read the last nibble without checking data avail. */
+		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+		end_of_data:
+			DPRINTK (KERN_DEBUG
+				"%s: No more nibble data (%d bytes)\n",
+				port->name, i/2);
+
+			/* Go to reverse idle phase. */
+			parport_frob_control (port,
+					      PARPORT_CONTROL_AUTOFD,
+					      PARPORT_CONTROL_AUTOFD);
+			port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+		}
+		else
+			port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+	}
+
+	return i/2;
+#endif /* IEEE1284 support */
+}
+
+/* Byte mode. */
+size_t parport_ieee1284_read_byte (struct parport *port,
+				   void *buffer, size_t len,
+				   int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	unsigned char *buf = buffer;
+	ssize_t count = 0;
+
+	for (count = 0; count < len; count++) {
+		unsigned char byte;
+
+		/* Data available? */
+		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+			goto end_of_data;
+		}
+
+		/* Event 14: Place data bus in high impedance state. */
+		parport_data_reverse (port);
+
+		/* Event 7: Set nAutoFd low. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 9: nAck goes low. */
+		port->physport->ieee1284.phase = IEEE1284_PH_REV_DATA;
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     0)) {
+			/* Timeout -- no more data? */
+			parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+						 0);
+			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 9\n",
+				 port->name);
+			break;
+		}
+
+		byte = parport_read_data (port);
+		*buf++ = byte;
+
+		/* Event 10: Set nAutoFd high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 11: nAck goes high. */
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* Timeout -- no more data? */
+			DPRINTK (KERN_DEBUG "%s: Byte timeout at event 11\n",
+				 port->name);
+			break;
+		}
+
+		/* Event 16: Set nStrobe low. */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (5);
+
+		/* Event 17: Set nStrobe high. */
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+	}
+
+	if (count == len) {
+		/* Read the last byte without checking data avail. */
+		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+		end_of_data:
+			DPRINTK (KERN_DEBUG
+				 "%s: No more byte data (%Zd bytes)\n",
+				 port->name, count);
+
+			/* Go to reverse idle phase. */
+			parport_frob_control (port,
+					      PARPORT_CONTROL_AUTOFD,
+					      PARPORT_CONTROL_AUTOFD);
+			port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+		}
+		else
+			port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+	}
+
+	return count;
+#endif /* IEEE1284 support */
+}
+
+/***              *
+ * ECP Functions. *
+ *              ***/
+
+#ifdef CONFIG_PARPORT_1284
+
+static inline
+int ecp_forward_to_reverse (struct parport *port)
+{
+	int retval;
+
+	/* Event 38: Set nAutoFd low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_AUTOFD,
+			      PARPORT_CONTROL_AUTOFD);
+	parport_data_reverse (port);
+	udelay (5);
+
+	/* Event 39: Set nInit low to initiate bus reversal */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_INIT,
+			      0);
+
+	/* Event 40: PError goes low */
+	retval = parport_wait_peripheral (port,
+					  PARPORT_STATUS_PAPEROUT, 0);
+
+	if (!retval) {
+		DPRINTK (KERN_DEBUG "%s: ECP direction: reverse\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+	} else {
+		DPRINTK (KERN_DEBUG "%s: ECP direction: failed to reverse\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+	}
+
+	return retval;
+}
+
+static inline
+int ecp_reverse_to_forward (struct parport *port)
+{
+	int retval;
+
+	/* Event 47: Set nInit high */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_INIT
+			      | PARPORT_CONTROL_AUTOFD,
+			      PARPORT_CONTROL_INIT
+			      | PARPORT_CONTROL_AUTOFD);
+
+	/* Event 49: PError goes high */
+	retval = parport_wait_peripheral (port,
+					  PARPORT_STATUS_PAPEROUT,
+					  PARPORT_STATUS_PAPEROUT);
+
+	if (!retval) {
+		parport_data_forward (port);
+		DPRINTK (KERN_DEBUG "%s: ECP direction: forward\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+	} else {
+		DPRINTK (KERN_DEBUG
+			 "%s: ECP direction: failed to switch forward\n",
+			 port->name);
+		port->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+	}
+
+
+	return retval;
+}
+
+#endif /* IEEE1284 support */
+
+/* ECP mode, forward channel, data. */
+size_t parport_ieee1284_ecp_write_data (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	const unsigned char *buf = buffer;
+	size_t written;
+	int retry;
+
+	port = port->physport;
+
+	if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
+		if (ecp_reverse_to_forward (port))
+			return 0;
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* HostAck high (data, not command) */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_INIT);
+	for (written = 0; written < len; written++, buf++) {
+		unsigned long expire = jiffies + port->cad->timeout;
+		unsigned char byte;
+
+		byte = *buf;
+	try_again:
+		parport_write_data (port, byte);
+		parport_frob_control (port, PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (5);
+		for (retry = 0; retry < 100; retry++) {
+			if (!parport_wait_peripheral (port,
+						      PARPORT_STATUS_BUSY, 0))
+				goto success;
+
+			if (signal_pending (current)) {
+				parport_frob_control (port,
+						      PARPORT_CONTROL_STROBE,
+						      0);
+				break;
+			}
+		}
+
+		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
+		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_INIT);
+		udelay (50);
+		if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+			/* It's buggered. */
+			parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+			break;
+		}
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		udelay (50);
+		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+			break;
+
+		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+			 port->name);
+
+		if (time_after_eq (jiffies, expire)) break;
+		goto try_again;
+	success:
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+		udelay (5);
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY))
+			/* Peripheral hasn't accepted the data. */
+			break;
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+#endif /* IEEE1284 support */
+}
+
+/* ECP mode, reverse channel, data. */
+size_t parport_ieee1284_ecp_read_data (struct parport *port,
+				       void *buffer, size_t len, int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	struct pardevice *dev = port->cad;
+	unsigned char *buf = buffer;
+	int rle_count = 0; /* shut gcc up */
+	unsigned char ctl;
+	int rle = 0;
+	ssize_t count = 0;
+
+	port = port->physport;
+
+	if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE)
+		if (ecp_forward_to_reverse (port))
+			return 0;
+
+	port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+
+	/* Set HostAck low to start accepting data. */
+	ctl = parport_read_control (port);
+	ctl &= ~(PARPORT_CONTROL_STROBE | PARPORT_CONTROL_INIT |
+		 PARPORT_CONTROL_AUTOFD);
+	parport_write_control (port,
+			       ctl | PARPORT_CONTROL_AUTOFD);
+	while (count < len) {
+		unsigned long expire = jiffies + dev->timeout;
+		unsigned char byte;
+		int command;
+
+		/* Event 43: Peripheral sets nAck low. It can take as
+                   long as it wants. */
+		while (parport_wait_peripheral (port, PARPORT_STATUS_ACK, 0)) {
+			/* The peripheral hasn't given us data in
+			   35ms.  If we have data to give back to the
+			   caller, do it now. */
+			if (count)
+				goto out;
+
+			/* If we've used up all the time we were allowed,
+			   give up altogether. */
+			if (!time_before (jiffies, expire))
+				goto out;
+
+			/* Yield the port for a while. */
+			if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+				parport_release (dev);
+				schedule_timeout_interruptible(msecs_to_jiffies(40));
+				parport_claim_or_block (dev);
+			}
+			else
+				/* We must have the device claimed here. */
+				parport_wait_event (port, msecs_to_jiffies(40));
+
+			/* Is there a signal pending? */
+			if (signal_pending (current))
+				goto out;
+		}
+
+		/* Is this a command? */
+		if (rle)
+			/* The last byte was a run-length count, so
+                           this can't be as well. */
+			command = 0;
+		else
+			command = (parport_read_status (port) &
+				   PARPORT_STATUS_BUSY) ? 1 : 0;
+
+		/* Read the data. */
+		byte = parport_read_data (port);
+
+		/* If this is a channel command, rather than an RLE
+                   command or a normal data byte, don't accept it. */
+		if (command) {
+			if (byte & 0x80) {
+				DPRINTK (KERN_DEBUG "%s: stopping short at "
+					 "channel command (%02x)\n",
+					 port->name, byte);
+				goto out;
+			}
+			else if (port->ieee1284.mode != IEEE1284_MODE_ECPRLE)
+				DPRINTK (KERN_DEBUG "%s: device illegally "
+					 "using RLE; accepting anyway\n",
+					 port->name);
+
+			rle_count = byte + 1;
+
+			/* Are we allowed to read that many bytes? */
+			if (rle_count > (len - count)) {
+				DPRINTK (KERN_DEBUG "%s: leaving %d RLE bytes "
+					 "for next time\n", port->name,
+					 rle_count);
+				break;
+			}
+
+			rle = 1;
+		}
+
+		/* Event 44: Set HostAck high, acknowledging handshake. */
+		parport_write_control (port, ctl);
+
+		/* Event 45: The peripheral has 35ms to set nAck high. */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_ACK,
+					     PARPORT_STATUS_ACK)) {
+			/* It's gone wrong.  Return what data we have
+                           to the caller. */
+			DPRINTK (KERN_DEBUG "ECP read timed out at 45\n");
+
+			if (command)
+				printk (KERN_WARNING
+					"%s: command ignored (%02x)\n",
+					port->name, byte);
+
+			break;
+		}
+
+		/* Event 46: Set HostAck low and accept the data. */
+		parport_write_control (port,
+				       ctl | PARPORT_CONTROL_AUTOFD);
+
+		/* If we just read a run-length count, fetch the data. */
+		if (command)
+			continue;
+
+		/* If this is the byte after a run-length count, decompress. */
+		if (rle) {
+			rle = 0;
+			memset (buf, byte, rle_count);
+			buf += rle_count;
+			count += rle_count;
+			DPRINTK (KERN_DEBUG "%s: decompressed to %d bytes\n",
+				 port->name, rle_count);
+		} else {
+			/* Normal data byte. */
+			*buf = byte;
+			buf++, count++;
+		}
+	}
+
+ out:
+	port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+	return count;
+#endif /* IEEE1284 support */
+}
+
+/* ECP mode, forward channel, commands. */
+size_t parport_ieee1284_ecp_write_addr (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+#ifndef CONFIG_PARPORT_1284
+	return 0;
+#else
+	const unsigned char *buf = buffer;
+	size_t written;
+	int retry;
+
+	port = port->physport;
+
+	if (port->ieee1284.phase != IEEE1284_PH_FWD_IDLE)
+		if (ecp_reverse_to_forward (port))
+			return 0;
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* HostAck low (command, not data) */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_STROBE
+			      | PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_AUTOFD
+			      | PARPORT_CONTROL_INIT);
+	for (written = 0; written < len; written++, buf++) {
+		unsigned long expire = jiffies + port->cad->timeout;
+		unsigned char byte;
+
+		byte = *buf;
+	try_again:
+		parport_write_data (port, byte);
+		parport_frob_control (port, PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_STROBE);
+		udelay (5);
+		for (retry = 0; retry < 100; retry++) {
+			if (!parport_wait_peripheral (port,
+						      PARPORT_STATUS_BUSY, 0))
+				goto success;
+
+			if (signal_pending (current)) {
+				parport_frob_control (port,
+						      PARPORT_CONTROL_STROBE,
+						      0);
+				break;
+			}
+		}
+
+		/* Time for Host Transfer Recovery (page 41 of IEEE1284) */
+		DPRINTK (KERN_DEBUG "%s: ECP transfer stalled!\n", port->name);
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_INIT);
+		udelay (50);
+		if (parport_read_status (port) & PARPORT_STATUS_PAPEROUT) {
+			/* It's buggered. */
+			parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+			break;
+		}
+
+		parport_frob_control (port, PARPORT_CONTROL_INIT, 0);
+		udelay (50);
+		if (!(parport_read_status (port) & PARPORT_STATUS_PAPEROUT))
+			break;
+
+		DPRINTK (KERN_DEBUG "%s: Host transfer recovered\n",
+			 port->name);
+
+		if (time_after_eq (jiffies, expire)) break;
+		goto try_again;
+	success:
+		parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+		udelay (5);
+		if (parport_wait_peripheral (port,
+					     PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY))
+			/* Peripheral hasn't accepted the data. */
+			break;
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+#endif /* IEEE1284 support */
+}
+
+/***              *
+ * EPP functions. *
+ *              ***/
+
+/* EPP mode, forward channel, data. */
+size_t parport_ieee1284_epp_write_data (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	size_t ret = 0;
+
+	/* set EPP idle state (just to make sure) with strobe low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_forward (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 62: Write data and set autofd low */
+		parport_write_data (port, *bp);
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+
+		/* Event 58: wait for busy (nWait) to go high */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+			break;
+
+		/* Event 63: set nAutoFd (nDStrb) high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 60: wait for busy (nWait) to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY, 5))
+			break;
+
+		ret++;
+	}
+
+	/* Event 61: set strobe (nWrite) high */
+	parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+
+	return ret;
+}
+
+/* EPP mode, reverse channel, data. */
+size_t parport_ieee1284_epp_read_data (struct parport *port,
+				       void *buffer, size_t len,
+				       int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	unsigned ret = 0;
+
+	/* set EPP idle state (just to make sure) with strobe high */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_reverse (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 67: set nAutoFd (nDStrb) low */
+		parport_frob_control (port,
+				      PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_AUTOFD);
+		/* Event 58: wait for Busy to go high */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+			break;
+		}
+
+		*bp = parport_read_data (port);
+
+		/* Event 63: set nAutoFd (nDStrb) high */
+		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
+
+		/* Event 60: wait for Busy to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY, 5)) {
+			break;
+		}
+
+		ret++;
+	}
+	port->ops->data_forward (port);
+
+	return ret;
+}
+
+/* EPP mode, forward channel, addresses. */
+size_t parport_ieee1284_epp_write_addr (struct parport *port,
+					const void *buffer, size_t len,
+					int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	size_t ret = 0;
+
+	/* set EPP idle state (just to make sure) with strobe low */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_forward (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 56: Write data and set nAStrb low. */
+		parport_write_data (port, *bp);
+		parport_frob_control (port, PARPORT_CONTROL_SELECT,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 58: wait for busy (nWait) to go high */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 0, 10))
+			break;
+
+		/* Event 59: set nAStrb high */
+		parport_frob_control (port, PARPORT_CONTROL_SELECT, 0);
+
+		/* Event 60: wait for busy (nWait) to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY,
+					     PARPORT_STATUS_BUSY, 5))
+			break;
+
+		ret++;
+	}
+
+	/* Event 61: set strobe (nWrite) high */
+	parport_frob_control (port, PARPORT_CONTROL_STROBE, 0);
+
+	return ret;
+}
+
+/* EPP mode, reverse channel, addresses. */
+size_t parport_ieee1284_epp_read_addr (struct parport *port,
+				       void *buffer, size_t len,
+				       int flags)
+{
+	unsigned char *bp = (unsigned char *) buffer;
+	unsigned ret = 0;
+
+	/* Set EPP idle state (just to make sure) with strobe high */
+	parport_frob_control (port,
+			      PARPORT_CONTROL_STROBE |
+			      PARPORT_CONTROL_AUTOFD |
+			      PARPORT_CONTROL_SELECT |
+			      PARPORT_CONTROL_INIT,
+			      PARPORT_CONTROL_INIT);
+	port->ops->data_reverse (port);
+	for (; len > 0; len--, bp++) {
+		/* Event 64: set nSelectIn (nAStrb) low */
+		parport_frob_control (port, PARPORT_CONTROL_SELECT,
+				      PARPORT_CONTROL_SELECT);
+
+		/* Event 58: wait for Busy to go high */
+		if (parport_wait_peripheral (port, PARPORT_STATUS_BUSY, 0)) {
+			break;
+		}
+
+		*bp = parport_read_data (port);
+
+		/* Event 59: set nSelectIn (nAStrb) high */
+		parport_frob_control (port, PARPORT_CONTROL_SELECT,
+				      0);
+
+		/* Event 60: wait for Busy to go low */
+		if (parport_poll_peripheral (port, PARPORT_STATUS_BUSY, 
+					     PARPORT_STATUS_BUSY, 5))
+			break;
+
+		ret++;
+	}
+	port->ops->data_forward (port);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(parport_ieee1284_ecp_write_data);
+EXPORT_SYMBOL(parport_ieee1284_ecp_read_data);
+EXPORT_SYMBOL(parport_ieee1284_ecp_write_addr);
+EXPORT_SYMBOL(parport_ieee1284_write_compat);
+EXPORT_SYMBOL(parport_ieee1284_read_nibble);
+EXPORT_SYMBOL(parport_ieee1284_read_byte);
+EXPORT_SYMBOL(parport_ieee1284_epp_write_data);
+EXPORT_SYMBOL(parport_ieee1284_epp_read_data);
+EXPORT_SYMBOL(parport_ieee1284_epp_write_addr);
+EXPORT_SYMBOL(parport_ieee1284_epp_read_addr);
diff --git a/drivers/parport/multiface.h b/drivers/parport/multiface.h
new file mode 100644
index 00000000..56769dd5
--- /dev/null
+++ b/drivers/parport/multiface.h
@@ -0,0 +1,20 @@
+#ifndef _MULTIFACE_H_
+#define _MULTIFACE_H_
+
+/*
+ * Defines for SerialMaster, Multiface Card II and Multiface Card III
+ * The addresses given below are offsets to the board base address
+ * 
+ * 6.11.95 Joerg Dorchain (dorchain@mpi-sb.mpg.de)
+ *
+ */
+
+#define PIA_REG_PADWIDTH 255
+
+#define DUARTBASE 0x0000
+#define PITBASE   0x0100
+#define ROMBASE   0x0200
+#define PIABASE   0x4000
+
+#endif
+
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
new file mode 100644
index 00000000..8bef6d60
--- /dev/null
+++ b/drivers/parport/parport_amiga.c
@@ -0,0 +1,302 @@
+/* Low-level parallel port routines for the Amiga built-in port
+ *
+ * Author: Joerg Dorchain <joerg@dorchain.net>
+ *
+ * This is a complete rewrite of the code, but based heaviy upon the old
+ * lp_intern. code.
+ *
+ * The built-in Amiga parallel port provides one port at a fixed address
+ * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
+ * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
+ * in hardware when the data register is accessed), and 1 input control line
+ * /ACK, able to cause an interrupt, but both not directly settable by
+ * software.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/setup.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/amigaints.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(x...)	do { } while (0)
+#endif
+
+
+static void amiga_write_data(struct parport *p, unsigned char data)
+{
+	DPRINTK(KERN_DEBUG "write_data %c\n",data);
+	/* Triggers also /STROBE. This behavior cannot be changed */
+	ciaa.prb = data;
+	mb();
+}
+
+static unsigned char amiga_read_data(struct parport *p)
+{
+	/* Triggers also /STROBE. This behavior cannot be changed */
+	return ciaa.prb;
+}
+
+#if 0
+static unsigned char control_pc_to_amiga(unsigned char control)
+{
+	unsigned char ret = 0;
+
+	if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
+		;
+	if (control & PARPORT_CONTROL_INIT) /* INITP */
+		/* reset connected to cpu reset pin */;
+	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
+		/* Not connected */;
+	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
+		/* Handled only directly by hardware */;
+	return ret;
+}
+#endif
+
+static unsigned char control_amiga_to_pc(unsigned char control)
+{
+	return PARPORT_CONTROL_SELECT |
+	      PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
+	/* fake value: interrupt enable, select in, no reset,
+	no autolf, no strobe - seems to be closest the wiring diagram */
+}
+
+static void amiga_write_control(struct parport *p, unsigned char control)
+{
+	DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	/* No implementation possible */
+}
+	
+static unsigned char amiga_read_control( struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "read_control \n");
+	return control_amiga_to_pc(0);
+}
+
+static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
+{
+	unsigned char old;
+
+	DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	old = amiga_read_control(p);
+	amiga_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+#if 0 /* currently unused */
+static unsigned char status_pc_to_amiga(unsigned char status)
+{
+	unsigned char ret = 1;
+
+	if (status & PARPORT_STATUS_BUSY) /* Busy */
+		ret &= ~1;
+	if (status & PARPORT_STATUS_ACK) /* Ack */
+		/* handled in hardware */;
+	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
+		ret |= 2;
+	if (status & PARPORT_STATUS_SELECT) /* select */
+		ret |= 4;
+	if (status & PARPORT_STATUS_ERROR) /* error */
+		/* not connected */;
+	return ret;
+}
+#endif
+
+static unsigned char status_amiga_to_pc(unsigned char status)
+{
+	unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
+
+	if (status & 1) /* Busy */
+		ret &= ~PARPORT_STATUS_BUSY;
+	if (status & 2) /* PaperOut */
+		ret |= PARPORT_STATUS_PAPEROUT;
+	if (status & 4) /* Selected */
+		ret |= PARPORT_STATUS_SELECT;
+	/* the rest is not connected or handled autonomously in hardware */
+
+	return ret;
+}
+
+static unsigned char amiga_read_status(struct parport *p)
+{
+	unsigned char status;
+
+	status = status_amiga_to_pc(ciab.pra & 7);
+	DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	return status;
+}
+
+static void amiga_enable_irq(struct parport *p)
+{
+	enable_irq(IRQ_AMIGA_CIAA_FLG);
+}
+
+static void amiga_disable_irq(struct parport *p)
+{
+	disable_irq(IRQ_AMIGA_CIAA_FLG);
+}
+
+static void amiga_data_forward(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "forward\n");
+	ciaa.ddrb = 0xff; /* all pins output */
+	mb();
+}
+
+static void amiga_data_reverse(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "reverse\n");
+	ciaa.ddrb = 0; /* all pins input */
+	mb();
+}
+
+static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.amiga.data = 0;
+	s->u.amiga.datadir = 255;
+	s->u.amiga.status = 0;
+	s->u.amiga.statusdir = 0;
+}
+
+static void amiga_save_state(struct parport *p, struct parport_state *s)
+{
+	mb();
+	s->u.amiga.data = ciaa.prb;
+	s->u.amiga.datadir = ciaa.ddrb;
+	s->u.amiga.status = ciab.pra & 7;
+	s->u.amiga.statusdir = ciab.ddra & 7;
+	mb();
+}
+
+static void amiga_restore_state(struct parport *p, struct parport_state *s)
+{
+	mb();
+	ciaa.prb = s->u.amiga.data;
+	ciaa.ddrb = s->u.amiga.datadir;
+	ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
+	ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
+	mb();
+}
+
+static struct parport_operations pp_amiga_ops = {
+	.write_data	= amiga_write_data,
+	.read_data	= amiga_read_data,
+
+	.write_control	= amiga_write_control,
+	.read_control	= amiga_read_control,
+	.frob_control	= amiga_frob_control,
+
+	.read_status	= amiga_read_status,
+
+	.enable_irq	= amiga_enable_irq,
+	.disable_irq	= amiga_disable_irq,
+
+	.data_forward	= amiga_data_forward,
+	.data_reverse	= amiga_data_reverse,
+
+	.init_state	= amiga_init_state,
+	.save_state	= amiga_save_state,
+	.restore_state	= amiga_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* ----------- Initialisation code --------------------------------- */
+
+static int __init amiga_parallel_probe(struct platform_device *pdev)
+{
+	struct parport *p;
+	int err;
+
+	ciaa.ddrb = 0xff;
+	ciab.ddra &= 0xf8;
+	mb();
+
+	p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
+				   PARPORT_DMA_NONE, &pp_amiga_ops);
+	if (!p)
+		return -EBUSY;
+
+	err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
+			  p);
+	if (err)
+		goto out_irq;
+
+	printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
+	/* XXX: set operating mode */
+	parport_announce_port(p);
+
+	platform_set_drvdata(pdev, p);
+
+	return 0;
+
+out_irq:
+	parport_put_port(p);
+	return err;
+}
+
+static int __exit amiga_parallel_remove(struct platform_device *pdev)
+{
+	struct parport *port = platform_get_drvdata(pdev);
+
+	parport_remove_port(port);
+	if (port->irq != PARPORT_IRQ_NONE)
+		free_irq(IRQ_AMIGA_CIAA_FLG, port);
+	parport_put_port(port);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver amiga_parallel_driver = {
+	.remove = __exit_p(amiga_parallel_remove),
+	.driver   = {
+		.name	= "amiga-parallel",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amiga_parallel_init(void)
+{
+	return platform_driver_probe(&amiga_parallel_driver,
+				     amiga_parallel_probe);
+}
+
+module_init(amiga_parallel_init);
+
+static void __exit amiga_parallel_exit(void)
+{
+	platform_driver_unregister(&amiga_parallel_driver);
+}
+
+module_exit(amiga_parallel_exit);
+
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
+MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-parallel");
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
new file mode 100644
index 00000000..0b28fcce
--- /dev/null
+++ b/drivers/parport/parport_atari.c
@@ -0,0 +1,233 @@
+/* Low-level parallel port routines for the Atari builtin port
+ *
+ * Author: Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+ *
+ * Based on parport_amiga.c.
+ *
+ * The built-in Atari parallel port provides one port at a fixed address
+ * with 8 output data lines (D0 - D7), 1 output control line (STROBE)
+ * and 1 input status line (BUSY) able to cause an interrupt.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/interrupt.h>
+#include <asm/setup.h>
+#include <asm/atarihw.h>
+#include <asm/irq.h>
+#include <asm/atariints.h>
+
+static struct parport *this_port = NULL;
+
+static unsigned char
+parport_atari_read_data(struct parport *p)
+{
+	unsigned long flags;
+	unsigned char data;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 15;
+	data = sound_ym.rd_data_reg_sel;
+	local_irq_restore(flags);
+	return data;
+}
+
+static void
+parport_atari_write_data(struct parport *p, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 15;
+	sound_ym.wd_data = data;
+	local_irq_restore(flags);
+}
+
+static unsigned char
+parport_atari_read_control(struct parport *p)
+{
+	unsigned long flags;
+	unsigned char control = 0;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 14;
+	if (!(sound_ym.rd_data_reg_sel & (1 << 5)))
+		control = PARPORT_CONTROL_STROBE;
+	local_irq_restore(flags);
+	return control;
+}
+
+static void
+parport_atari_write_control(struct parport *p, unsigned char control)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 14;
+	if (control & PARPORT_CONTROL_STROBE)
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~(1 << 5);
+	else
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
+	local_irq_restore(flags);
+}
+
+static unsigned char
+parport_atari_frob_control(struct parport *p, unsigned char mask,
+			   unsigned char val)
+{
+	unsigned char old = parport_atari_read_control(p);
+	parport_atari_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+static unsigned char
+parport_atari_read_status(struct parport *p)
+{
+	return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+		PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
+}
+
+static void
+parport_atari_init_state(struct pardevice *d, struct parport_state *s)
+{
+}
+
+static void
+parport_atari_save_state(struct parport *p, struct parport_state *s)
+{
+}
+
+static void
+parport_atari_restore_state(struct parport *p, struct parport_state *s)
+{
+}
+
+static void
+parport_atari_enable_irq(struct parport *p)
+{
+	enable_irq(IRQ_MFP_BUSY);
+}
+
+static void
+parport_atari_disable_irq(struct parport *p)
+{
+	disable_irq(IRQ_MFP_BUSY);
+}
+
+static void
+parport_atari_data_forward(struct parport *p)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Soundchip port B as output. */
+	sound_ym.rd_data_reg_sel = 7;
+	sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x40;
+	local_irq_restore(flags);
+}
+
+static void
+parport_atari_data_reverse(struct parport *p)
+{
+#if 0 /* too dangerous, can kill sound chip */
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Soundchip port B as input. */
+	sound_ym.rd_data_reg_sel = 7;
+	sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40;
+	local_irq_restore(flags);
+#endif
+}
+
+static struct parport_operations parport_atari_ops = {
+	.write_data	= parport_atari_write_data,
+	.read_data	= parport_atari_read_data,
+
+	.write_control	= parport_atari_write_control,
+	.read_control	= parport_atari_read_control,
+	.frob_control	= parport_atari_frob_control,
+
+	.read_status	= parport_atari_read_status,
+
+	.enable_irq	= parport_atari_enable_irq,
+	.disable_irq	= parport_atari_disable_irq,
+
+	.data_forward	= parport_atari_data_forward,
+	.data_reverse	= parport_atari_data_reverse,
+
+	.init_state	= parport_atari_init_state,
+	.save_state	= parport_atari_save_state,
+	.restore_state	= parport_atari_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init parport_atari_init(void)
+{
+	struct parport *p;
+	unsigned long flags;
+
+	if (MACH_IS_ATARI) {
+		local_irq_save(flags);
+		/* Soundchip port A/B as output. */
+		sound_ym.rd_data_reg_sel = 7;
+		sound_ym.wd_data = (sound_ym.rd_data_reg_sel & 0x3f) | 0xc0;
+		/* STROBE high. */
+		sound_ym.rd_data_reg_sel = 14;
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
+		local_irq_restore(flags);
+		/* MFP port I0 as input. */
+		st_mfp.data_dir &= ~1;
+		/* MFP port I0 interrupt on high->low edge. */
+		st_mfp.active_edge &= ~1;
+		p = parport_register_port((unsigned long)&sound_ym.wd_data,
+					  IRQ_MFP_BUSY, PARPORT_DMA_NONE,
+					  &parport_atari_ops);
+		if (!p)
+			return -ENODEV;
+		if (request_irq(IRQ_MFP_BUSY, parport_irq_handler,
+				IRQ_TYPE_SLOW, p->name, p)) {
+			parport_put_port (p);
+			return -ENODEV;
+		}
+
+		this_port = p;
+		printk(KERN_INFO "%s: Atari built-in port using irq\n", p->name);
+		parport_announce_port (p);
+
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static void __exit parport_atari_exit(void)
+{
+	parport_remove_port(this_port);
+	if (this_port->irq != PARPORT_IRQ_NONE)
+		free_irq(IRQ_MFP_BUSY, this_port);
+	parport_put_port(this_port);
+}
+
+MODULE_AUTHOR("Andreas Schwab");
+MODULE_DESCRIPTION("Parport Driver for Atari builtin Port");
+MODULE_SUPPORTED_DEVICE("Atari builtin Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_atari_init)
+module_exit(parport_atari_exit)
diff --git a/drivers/parport/parport_ax88796.c b/drivers/parport/parport_ax88796.c
new file mode 100644
index 00000000..7c5d8669
--- /dev/null
+++ b/drivers/parport/parport_ax88796.c
@@ -0,0 +1,427 @@
+/* linux/drivers/parport/parport_ax88796.c
+ *
+ * (c) 2005,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/parport.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define AX_SPR_BUSY		(1<<7)
+#define AX_SPR_ACK		(1<<6)
+#define AX_SPR_PE		(1<<5)
+#define AX_SPR_SLCT		(1<<4)
+#define AX_SPR_ERR		(1<<3)
+
+#define AX_CPR_nDOE		(1<<5)
+#define AX_CPR_SLCTIN		(1<<3)
+#define AX_CPR_nINIT		(1<<2)
+#define AX_CPR_ATFD		(1<<1)
+#define AX_CPR_STRB		(1<<0)
+
+struct ax_drvdata {
+	struct parport		*parport;
+	struct parport_state	 suspend;
+
+	struct device		*dev;
+	struct resource		*io;
+
+	unsigned char		 irq_enabled;
+
+	void __iomem		*base;
+	void __iomem		*spp_data;
+	void __iomem		*spp_spr;
+	void __iomem		*spp_cpr;
+};
+
+static inline struct ax_drvdata *pp_to_drv(struct parport *p)
+{
+	return p->private_data;
+}
+
+static unsigned char
+parport_ax88796_read_data(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	return readb(dd->spp_data);
+}
+
+static void
+parport_ax88796_write_data(struct parport *p, unsigned char data)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	writeb(data, dd->spp_data);
+}
+
+static unsigned char
+parport_ax88796_read_control(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	unsigned int cpr = readb(dd->spp_cpr);
+	unsigned int ret = 0;
+
+	if (!(cpr & AX_CPR_STRB))
+		ret |= PARPORT_CONTROL_STROBE;
+
+	if (!(cpr & AX_CPR_ATFD))
+		ret |= PARPORT_CONTROL_AUTOFD;
+
+	if (cpr & AX_CPR_nINIT)
+		ret |= PARPORT_CONTROL_INIT;
+
+	if (!(cpr & AX_CPR_SLCTIN))
+		ret |= PARPORT_CONTROL_SELECT;
+
+	return ret;
+}
+
+static void
+parport_ax88796_write_control(struct parport *p, unsigned char control)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	unsigned int cpr = readb(dd->spp_cpr);
+
+	cpr &= AX_CPR_nDOE;
+
+	if (!(control & PARPORT_CONTROL_STROBE))
+		cpr |= AX_CPR_STRB;
+
+	if (!(control & PARPORT_CONTROL_AUTOFD))
+		cpr |= AX_CPR_ATFD;
+
+	if (control & PARPORT_CONTROL_INIT)
+		cpr |= AX_CPR_nINIT;
+
+	if (!(control & PARPORT_CONTROL_SELECT))
+		cpr |= AX_CPR_SLCTIN;
+
+	dev_dbg(dd->dev, "write_control: ctrl=%02x, cpr=%02x\n", control, cpr);
+	writeb(cpr, dd->spp_cpr);
+
+	if (parport_ax88796_read_control(p) != control) {
+		dev_err(dd->dev, "write_control: read != set (%02x, %02x)\n",
+			parport_ax88796_read_control(p), control);
+	}
+}
+
+static unsigned char
+parport_ax88796_read_status(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	unsigned int status = readb(dd->spp_spr);
+	unsigned int ret = 0;
+
+	if (status & AX_SPR_BUSY)
+		ret |= PARPORT_STATUS_BUSY;
+
+	if (status & AX_SPR_ACK)
+		ret |= PARPORT_STATUS_ACK;
+
+	if (status & AX_SPR_ERR)
+		ret |= PARPORT_STATUS_ERROR;
+
+	if (status & AX_SPR_SLCT)
+		ret |= PARPORT_STATUS_SELECT;
+
+	if (status & AX_SPR_PE)
+		ret |= PARPORT_STATUS_PAPEROUT;
+
+	return ret;
+}
+
+static unsigned char
+parport_ax88796_frob_control(struct parport *p, unsigned char mask,
+			     unsigned char val)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	unsigned char old = parport_ax88796_read_control(p);
+
+	dev_dbg(dd->dev, "frob: mask=%02x, val=%02x, old=%02x\n",
+		mask, val, old);
+
+	parport_ax88796_write_control(p, (old & ~mask) | val);
+	return old;
+}
+
+static void
+parport_ax88796_enable_irq(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (!dd->irq_enabled) {
+		enable_irq(p->irq);
+		dd->irq_enabled = 1;
+	}
+	local_irq_restore(flags);
+}
+
+static void
+parport_ax88796_disable_irq(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (dd->irq_enabled) {
+		disable_irq(p->irq);
+		dd->irq_enabled = 0;
+	}
+	local_irq_restore(flags);
+}
+
+static void
+parport_ax88796_data_forward(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	void __iomem *cpr = dd->spp_cpr;
+
+	writeb((readb(cpr) & ~AX_CPR_nDOE), cpr);
+}
+
+static void
+parport_ax88796_data_reverse(struct parport *p)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+	void __iomem *cpr = dd->spp_cpr;
+
+	writeb(readb(cpr) | AX_CPR_nDOE, cpr);
+}
+
+static void
+parport_ax88796_init_state(struct pardevice *d, struct parport_state *s)
+{
+	struct ax_drvdata *dd = pp_to_drv(d->port);
+
+	memset(s, 0, sizeof(struct parport_state));
+
+	dev_dbg(dd->dev, "init_state: %p: state=%p\n", d, s);
+	s->u.ax88796.cpr = readb(dd->spp_cpr);
+}
+
+static void
+parport_ax88796_save_state(struct parport *p, struct parport_state *s)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	dev_dbg(dd->dev, "save_state: %p: state=%p\n", p, s);
+	s->u.ax88796.cpr = readb(dd->spp_cpr);
+}
+
+static void
+parport_ax88796_restore_state(struct parport *p, struct parport_state *s)
+{
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	dev_dbg(dd->dev, "restore_state: %p: state=%p\n", p, s);
+	writeb(s->u.ax88796.cpr, dd->spp_cpr);
+}
+
+static struct parport_operations parport_ax88796_ops = {
+	.write_data	= parport_ax88796_write_data,
+	.read_data	= parport_ax88796_read_data,
+
+	.write_control	= parport_ax88796_write_control,
+	.read_control	= parport_ax88796_read_control,
+	.frob_control	= parport_ax88796_frob_control,
+
+	.read_status	= parport_ax88796_read_status,
+
+	.enable_irq	= parport_ax88796_enable_irq,
+	.disable_irq	= parport_ax88796_disable_irq,
+
+	.data_forward	= parport_ax88796_data_forward,
+	.data_reverse	= parport_ax88796_data_reverse,
+
+	.init_state	= parport_ax88796_init_state,
+	.save_state	= parport_ax88796_save_state,
+	.restore_state	= parport_ax88796_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+static int parport_ax88796_probe(struct platform_device *pdev)
+{
+	struct device *_dev = &pdev->dev;
+	struct ax_drvdata *dd;
+	struct parport *pp = NULL;
+	struct resource *res;
+	unsigned long size;
+	int spacing;
+	int irq;
+	int ret;
+
+	dd = kzalloc(sizeof(struct ax_drvdata), GFP_KERNEL);
+	if (dd == NULL) {
+		dev_err(_dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(_dev, "no MEM specified\n");
+		ret = -ENXIO;
+		goto exit_mem;
+	}
+
+	size = resource_size(res);
+	spacing = size / 3;
+
+	dd->io = request_mem_region(res->start, size, pdev->name);
+	if (dd->io == NULL) {
+		dev_err(_dev, "cannot reserve memory\n");
+		ret = -ENXIO;
+		goto exit_mem;
+	}
+
+	dd->base = ioremap(res->start, size);
+	if (dd->base == NULL) {
+		dev_err(_dev, "cannot ioremap region\n");
+		ret = -ENXIO;
+		goto exit_res;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		irq = PARPORT_IRQ_NONE;
+
+	pp = parport_register_port((unsigned long)dd->base, irq,
+				   PARPORT_DMA_NONE,
+				   &parport_ax88796_ops);
+
+	if (pp == NULL) {
+		dev_err(_dev, "failed to register parallel port\n");
+		ret = -ENOMEM;
+		goto exit_unmap;
+	}
+
+	pp->private_data = dd;
+	dd->parport = pp;
+	dd->dev = _dev;
+
+	dd->spp_data = dd->base;
+	dd->spp_spr  = dd->base + (spacing * 1);
+	dd->spp_cpr  = dd->base + (spacing * 2);
+
+	/* initialise the port controls */
+	writeb(AX_CPR_STRB, dd->spp_cpr);
+
+	if (irq >= 0) {
+		/* request irq */
+		ret = request_irq(irq, parport_irq_handler,
+				  IRQF_TRIGGER_FALLING, pdev->name, pp);
+
+		if (ret < 0)
+			goto exit_port;
+
+		dd->irq_enabled = 1;
+	}
+
+	platform_set_drvdata(pdev, pp);
+
+	dev_info(_dev, "attached parallel port driver\n");
+	parport_announce_port(pp);
+
+	return 0;
+
+ exit_port:
+	parport_remove_port(pp);
+ exit_unmap:
+	iounmap(dd->base);
+ exit_res:
+	release_resource(dd->io);
+	kfree(dd->io);
+ exit_mem:
+	kfree(dd);
+	return ret;
+}
+
+static int parport_ax88796_remove(struct platform_device *pdev)
+{
+	struct parport *p = platform_get_drvdata(pdev);
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	free_irq(p->irq, p);
+	parport_remove_port(p);
+	iounmap(dd->base);
+	release_resource(dd->io);
+	kfree(dd->io);
+	kfree(dd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int parport_ax88796_suspend(struct platform_device *dev,
+				   pm_message_t state)
+{
+	struct parport *p = platform_get_drvdata(dev);
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	parport_ax88796_save_state(p, &dd->suspend);
+	writeb(AX_CPR_nDOE | AX_CPR_STRB, dd->spp_cpr);
+	return 0;
+}
+
+static int parport_ax88796_resume(struct platform_device *dev)
+{
+	struct parport *p = platform_get_drvdata(dev);
+	struct ax_drvdata *dd = pp_to_drv(p);
+
+	parport_ax88796_restore_state(p, &dd->suspend);
+	return 0;
+}
+
+#else
+#define parport_ax88796_suspend NULL
+#define parport_ax88796_resume  NULL
+#endif
+
+MODULE_ALIAS("platform:ax88796-pp");
+
+static struct platform_driver axdrv = {
+	.driver		= {
+		.name	= "ax88796-pp",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= parport_ax88796_probe,
+	.remove		= parport_ax88796_remove,
+	.suspend	= parport_ax88796_suspend,
+	.resume		= parport_ax88796_resume,
+};
+
+module_platform_driver(axdrv);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("AX88796 Parport parallel port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
new file mode 100644
index 00000000..067ad517
--- /dev/null
+++ b/drivers/parport/parport_cs.c
@@ -0,0 +1,208 @@
+/*======================================================================
+
+    A driver for PCMCIA parallel port adapters
+
+    (specifically, for the Quatech SPP-100 EPP card: other cards will
+    probably require driver tweaks)
+    
+    parport_cs.c 1.29 2002/10/11 06:57:41
+
+    The contents of this file are subject to the Mozilla Public
+    License Version 1.1 (the "License"); you may not use this file
+    except in compliance with the License. You may obtain a copy of
+    the License at http://www.mozilla.org/MPL/
+
+    Software distributed under the License is distributed on an "AS
+    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+    implied. See the License for the specific language governing
+    rights and limitations under the License.
+
+    The initial developer of the original code is David A. Hinds
+    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+
+    Alternatively, the contents of this file may be used under the
+    terms of the GNU General Public License version 2 (the "GPL"), in
+    which case the provisions of the GPL are applicable instead of the
+    above.  If you wish to allow the use of your version of this file
+    only under the terms of the GPL and not to allow others to use
+    your version of this file under the MPL, indicate your decision
+    by deleting the provisions above and replace them with the notice
+    and other provisions required by the GPL.  If you do not delete
+    the provisions above, a recipient may use your version of this
+    file under either the MPL or the GPL.
+    
+======================================================================*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("PCMCIA parallel port card driver");
+MODULE_LICENSE("Dual MPL/GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+INT_MODULE_PARM(epp_mode, 1);
+
+
+/*====================================================================*/
+
+#define FORCE_EPP_MODE	0x08
+
+typedef struct parport_info_t {
+	struct pcmcia_device	*p_dev;
+    int			ndev;
+    struct parport	*port;
+} parport_info_t;
+
+static void parport_detach(struct pcmcia_device *p_dev);
+static int parport_config(struct pcmcia_device *link);
+static void parport_cs_release(struct pcmcia_device *);
+
+static int parport_probe(struct pcmcia_device *link)
+{
+    parport_info_t *info;
+
+    dev_dbg(&link->dev, "parport_attach()\n");
+
+    /* Create new parport device */
+    info = kzalloc(sizeof(*info), GFP_KERNEL);
+    if (!info) return -ENOMEM;
+    link->priv = info;
+    info->p_dev = link;
+
+    link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
+    return parport_config(link);
+} /* parport_attach */
+
+static void parport_detach(struct pcmcia_device *link)
+{
+    dev_dbg(&link->dev, "parport_detach\n");
+
+    parport_cs_release(link);
+
+    kfree(link->priv);
+} /* parport_detach */
+
+static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
+}
+
+static int parport_config(struct pcmcia_device *link)
+{
+    parport_info_t *info = link->priv;
+    struct parport *p;
+    int ret;
+
+    dev_dbg(&link->dev, "parport_config\n");
+
+    if (epp_mode)
+	    link->config_index |= FORCE_EPP_MODE;
+
+    ret = pcmcia_loop_config(link, parport_config_check, NULL);
+    if (ret)
+	    goto failed;
+
+    if (!link->irq)
+	    goto failed;
+    ret = pcmcia_enable_device(link);
+    if (ret)
+	    goto failed;
+
+    p = parport_pc_probe_port(link->resource[0]->start,
+			      link->resource[1]->start,
+			      link->irq, PARPORT_DMA_NONE,
+			      &link->dev, IRQF_SHARED);
+    if (p == NULL) {
+	printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
+	       "0x%3x, irq %u failed\n",
+	       (unsigned int) link->resource[0]->start,
+	       link->irq);
+	goto failed;
+    }
+
+    p->modes |= PARPORT_MODE_PCSPP;
+    if (epp_mode)
+	p->modes |= PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP;
+    info->ndev = 1;
+    info->port = p;
+
+    return 0;
+
+failed:
+    parport_cs_release(link);
+    return -ENODEV;
+} /* parport_config */
+
+static void parport_cs_release(struct pcmcia_device *link)
+{
+	parport_info_t *info = link->priv;
+
+	dev_dbg(&link->dev, "parport_release\n");
+
+	if (info->ndev) {
+		struct parport *p = info->port;
+		parport_pc_unregister_port(p);
+	}
+	info->ndev = 0;
+
+	pcmcia_disable_device(link);
+} /* parport_cs_release */
+
+
+static const struct pcmcia_device_id parport_ids[] = {
+	PCMCIA_DEVICE_FUNC_ID(3),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
+	PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0003),
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, parport_ids);
+
+static struct pcmcia_driver parport_cs_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "parport_cs",
+	.probe		= parport_probe,
+	.remove		= parport_detach,
+	.id_table	= parport_ids,
+};
+
+static int __init init_parport_cs(void)
+{
+	return pcmcia_register_driver(&parport_cs_driver);
+}
+
+static void __exit exit_parport_cs(void)
+{
+	pcmcia_unregister_driver(&parport_cs_driver);
+}
+
+module_init(init_parport_cs);
+module_exit(exit_parport_cs);
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
new file mode 100644
index 00000000..5d6de380
--- /dev/null
+++ b/drivers/parport/parport_gsc.c
@@ -0,0 +1,431 @@
+/*
+ *      Low-level parallel-support for PC-style hardware integrated in the 
+ *	LASI-Controller (on GSC-Bus) for HP-PARISC Workstations
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *	(C) 1999-2001 by Helge Deller <deller@gmx.de>
+ *
+ * 
+ * based on parport_pc.c by 
+ * 	    Grant Guenther <grant@torque.net>
+ * 	    Phil Blundell <philb@gnu.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell
+ *          Andrea Arcangeli
+ */
+
+#undef DEBUG	/* undef for production */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/sysctl.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+#include <asm/superio.h>
+
+#include <linux/parport.h>
+#include <asm/pdc.h>
+#include <asm/parisc-device.h>
+#include <asm/hardware.h>
+#include "parport_gsc.h"
+
+
+MODULE_AUTHOR("Helge Deller <deller@gmx.de>");
+MODULE_DESCRIPTION("HP-PARISC PC-style parallel port driver");
+MODULE_SUPPORTED_DEVICE("integrated PC-style parallel port");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Clear TIMEOUT BIT in EPP MODE
+ *
+ * This is also used in SPP detection.
+ */
+static int clear_epp_timeout(struct parport *pb)
+{
+	unsigned char r;
+
+	if (!(parport_gsc_read_status(pb) & 0x01))
+		return 1;
+
+	/* To clear timeout some chips require double read */
+	parport_gsc_read_status(pb);
+	r = parport_gsc_read_status(pb);
+	parport_writeb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
+	parport_writeb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
+	r = parport_gsc_read_status(pb);
+
+	return !(r & 0x01);
+}
+
+/*
+ * Access functions.
+ *
+ * Most of these aren't static because they may be used by the
+ * parport_xxx_yyy macros.  extern __inline__ versions of several
+ * of these are in parport_gsc.h.
+ */
+
+void parport_gsc_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
+}
+
+void parport_gsc_save_state(struct parport *p, struct parport_state *s)
+{
+	s->u.pc.ctr = parport_readb (CONTROL (p));
+}
+
+void parport_gsc_restore_state(struct parport *p, struct parport_state *s)
+{
+	parport_writeb (s->u.pc.ctr, CONTROL (p));
+}
+
+struct parport_operations parport_gsc_ops = 
+{
+	.write_data	= parport_gsc_write_data,
+	.read_data	= parport_gsc_read_data,
+
+	.write_control	= parport_gsc_write_control,
+	.read_control	= parport_gsc_read_control,
+	.frob_control	= parport_gsc_frob_control,
+
+	.read_status	= parport_gsc_read_status,
+
+	.enable_irq	= parport_gsc_enable_irq,
+	.disable_irq	= parport_gsc_disable_irq,
+
+	.data_forward	= parport_gsc_data_forward,
+	.data_reverse	= parport_gsc_data_reverse,
+
+	.init_state	= parport_gsc_init_state,
+	.save_state	= parport_gsc_save_state,
+	.restore_state	= parport_gsc_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data 	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* --- Mode detection ------------------------------------- */
+
+/*
+ * Checks for port existence, all ports support SPP MODE
+ */
+static int __devinit parport_SPP_supported(struct parport *pb)
+{
+	unsigned char r, w;
+
+	/*
+	 * first clear an eventually pending EPP timeout 
+	 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
+	 * that does not even respond to SPP cycles if an EPP
+	 * timeout is pending
+	 */
+	clear_epp_timeout(pb);
+
+	/* Do a simple read-write test to make sure the port exists. */
+	w = 0xc;
+	parport_writeb (w, CONTROL (pb));
+
+	/* Is there a control register that we can read from?  Some
+	 * ports don't allow reads, so read_control just returns a
+	 * software copy. Some ports _do_ allow reads, so bypass the
+	 * software copy here.  In addition, some bits aren't
+	 * writable. */
+	r = parport_readb (CONTROL (pb));
+	if ((r & 0xf) == w) {
+		w = 0xe;
+		parport_writeb (w, CONTROL (pb));
+		r = parport_readb (CONTROL (pb));
+		parport_writeb (0xc, CONTROL (pb));
+		if ((r & 0xf) == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	/* Try the data register.  The data lines aren't tri-stated at
+	 * this stage, so we expect back what we wrote. */
+	w = 0xaa;
+	parport_gsc_write_data (pb, w);
+	r = parport_gsc_read_data (pb);
+	if (r == w) {
+		w = 0x55;
+		parport_gsc_write_data (pb, w);
+		r = parport_gsc_read_data (pb);
+		if (r == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	return 0;
+}
+
+/* Detect PS/2 support.
+ *
+ * Bit 5 (0x20) sets the PS/2 data direction; setting this high
+ * allows us to read data from the data lines.  In theory we would get back
+ * 0xff but any peripheral attached to the port may drag some or all of the
+ * lines down to zero.  So if we get back anything that isn't the contents
+ * of the data register we deem PS/2 support to be present. 
+ *
+ * Some SPP ports have "half PS/2" ability - you can't turn off the line
+ * drivers, but an external peripheral with sufficiently beefy drivers of
+ * its own can overpower them and assert its own levels onto the bus, from
+ * where they can then be read back as normal.  Ports with this property
+ * and the right type of device attached are likely to fail the SPP test,
+ * (as they will appear to have stuck bits) and so the fact that they might
+ * be misdetected here is rather academic. 
+ */
+
+static int __devinit parport_PS2_supported(struct parport *pb)
+{
+	int ok = 0;
+  
+	clear_epp_timeout(pb);
+
+	/* try to tri-state the buffer */
+	parport_gsc_data_reverse (pb);
+	
+	parport_gsc_write_data(pb, 0x55);
+	if (parport_gsc_read_data(pb) != 0x55) ok++;
+
+	parport_gsc_write_data(pb, 0xaa);
+	if (parport_gsc_read_data(pb) != 0xaa) ok++;
+
+	/* cancel input mode */
+	parport_gsc_data_forward (pb);
+
+	if (ok) {
+		pb->modes |= PARPORT_MODE_TRISTATE;
+	} else {
+		struct parport_gsc_private *priv = pb->private_data;
+		priv->ctr_writable &= ~0x20;
+	}
+
+	return ok;
+}
+
+
+/* --- Initialisation code -------------------------------- */
+
+struct parport *__devinit parport_gsc_probe_port (unsigned long base,
+						 unsigned long base_hi,
+						 int irq, int dma,
+						 struct pci_dev *dev)
+{
+	struct parport_gsc_private *priv;
+	struct parport_operations *ops;
+	struct parport tmp;
+	struct parport *p = &tmp;
+
+	priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
+	if (!priv) {
+		printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
+		return NULL;
+	}
+	ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
+	if (!ops) {
+		printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
+			base);
+		kfree (priv);
+		return NULL;
+	}
+	memcpy (ops, &parport_gsc_ops, sizeof (struct parport_operations));
+	priv->ctr = 0xc;
+	priv->ctr_writable = 0xff;
+	priv->dma_buf = 0;
+	priv->dma_handle = 0;
+	priv->dev = dev;
+	p->base = base;
+	p->base_hi = base_hi;
+	p->irq = irq;
+	p->dma = dma;
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->ops = ops;
+	p->private_data = priv;
+	p->physport = p;
+	if (!parport_SPP_supported (p)) {
+		/* No port. */
+		kfree (priv);
+		return NULL;
+	}
+	parport_PS2_supported (p);
+
+	if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
+					PARPORT_DMA_NONE, ops))) {
+		kfree (priv);
+		kfree (ops);
+		return NULL;
+	}
+
+	p->base_hi = base_hi;
+	p->modes = tmp.modes;
+	p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
+	p->private_data = priv;
+
+	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	p->irq = irq;
+	if (p->irq == PARPORT_IRQ_AUTO) {
+		p->irq = PARPORT_IRQ_NONE;
+	}
+	if (p->irq != PARPORT_IRQ_NONE) {
+		printk(", irq %d", p->irq);
+
+		if (p->dma == PARPORT_DMA_AUTO) {
+			p->dma = PARPORT_DMA_NONE;
+		}
+	}
+	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
+                                           is mandatory (see above) */
+		p->dma = PARPORT_DMA_NONE;
+
+	printk(" [");
+#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
+	{
+		int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT)
+		printmode(EPP);
+//		printmode(ECP);
+//		printmode(DMA);
+	}
+#undef printmode
+	printk("]\n");
+
+	if (p->irq != PARPORT_IRQ_NONE) {
+		if (request_irq (p->irq, parport_irq_handler,
+				 0, p->name, p)) {
+			printk (KERN_WARNING "%s: irq %d in use, "
+				"resorting to polled operation\n",
+				p->name, p->irq);
+			p->irq = PARPORT_IRQ_NONE;
+			p->dma = PARPORT_DMA_NONE;
+		}
+	}
+
+	/* Done probing.  Now put the port into a sensible start-up state. */
+
+	parport_gsc_write_data(p, 0);
+	parport_gsc_data_forward (p);
+
+	/* Now that we've told the sharing engine about the port, and
+	   found out its characteristics, let the high-level drivers
+	   know about it. */
+	parport_announce_port (p);
+
+	return p;
+}
+
+
+#define PARPORT_GSC_OFFSET 0x800
+
+static int __devinitdata parport_count;
+
+static int __devinit parport_init_chip(struct parisc_device *dev)
+{
+	struct parport *p;
+	unsigned long port;
+
+	if (!dev->irq) {
+		printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+			(unsigned long long)dev->hpa.start);
+		return -ENODEV;
+	}
+
+	port = dev->hpa.start + PARPORT_GSC_OFFSET;
+	
+	/* some older machines with ASP-chip don't support
+	 * the enhanced parport modes.
+	 */
+	if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) {
+
+		/* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
+		printk("%s: initialize bidirectional-mode.\n", __func__);
+		parport_writeb ( (0x10 + 0x20), port + 4);
+
+	} else {
+		printk("%s: enhanced parport-modes not supported.\n", __func__);
+	}
+	
+	p = parport_gsc_probe_port(port, 0, dev->irq,
+			/* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
+	if (p)
+		parport_count++;
+	dev_set_drvdata(&dev->dev, p);
+
+	return 0;
+}
+
+static int __devexit parport_remove_chip(struct parisc_device *dev)
+{
+	struct parport *p = dev_get_drvdata(&dev->dev);
+	if (p) {
+		struct parport_gsc_private *priv = p->private_data;
+		struct parport_operations *ops = p->ops;
+		parport_remove_port(p);
+		if (p->dma != PARPORT_DMA_NONE)
+			free_dma(p->dma);
+		if (p->irq != PARPORT_IRQ_NONE)
+			free_irq(p->irq, p);
+		if (priv->dma_buf)
+			pci_free_consistent(priv->dev, PAGE_SIZE,
+					    priv->dma_buf,
+					    priv->dma_handle);
+		kfree (p->private_data);
+		parport_put_port(p);
+		kfree (ops); /* hope no-one cached it */
+	}
+	return 0;
+}
+
+static struct parisc_device_id parport_tbl[] = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x74 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, parport_tbl);
+
+static struct parisc_driver parport_driver = {
+	.name		= "Parallel",
+	.id_table	= parport_tbl,
+	.probe		= parport_init_chip,
+	.remove		= __devexit_p(parport_remove_chip),
+};
+
+int __devinit parport_gsc_init(void)
+{
+	return register_parisc_driver(&parport_driver);
+}
+
+static void __devexit parport_gsc_exit(void)
+{
+	unregister_parisc_driver(&parport_driver);
+}
+
+module_init(parport_gsc_init);
+module_exit(parport_gsc_exit);
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
new file mode 100644
index 00000000..fc9c37c5
--- /dev/null
+++ b/drivers/parport/parport_gsc.h
@@ -0,0 +1,222 @@
+/*
+ *	Low-level parallel-support for PC-style hardware integrated in the
+ *	LASI-Controller (on GSC-Bus) for HP-PARISC Workstations
+ *
+ *	(C) 1999-2001 by Helge Deller <deller@gmx.de>
+ *
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * based on parport_pc.c by
+ * 	    Grant Guenther <grant@torque.net>
+ * 	    Phil Blundell <Philip.Blundell@pobox.com>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell
+ *          Andrea Arcangeli
+ */
+
+#ifndef	__DRIVERS_PARPORT_PARPORT_GSC_H
+#define	__DRIVERS_PARPORT_PARPORT_GSC_H
+
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef	DEBUG_PARPORT	/* undefine for production */
+#define DELAY_TIME 	0
+
+#if DELAY_TIME == 0
+#define parport_readb	gsc_readb
+#define parport_writeb	gsc_writeb
+#else
+static __inline__ unsigned char parport_readb( unsigned long port )
+{
+    udelay(DELAY_TIME);
+    return gsc_readb(port);
+}
+
+static __inline__ void parport_writeb( unsigned char value, unsigned long port )
+{
+    gsc_writeb(value,port);
+    udelay(DELAY_TIME);
+}
+#endif
+
+/* --- register definitions ------------------------------- */
+
+#define EPPDATA(p)  ((p)->base    + 0x4)
+#define EPPADDR(p)  ((p)->base    + 0x3)
+#define CONTROL(p)  ((p)->base    + 0x2)
+#define STATUS(p)   ((p)->base    + 0x1)
+#define DATA(p)     ((p)->base    + 0x0)
+
+struct parport_gsc_private {
+	/* Contents of CTR. */
+	unsigned char ctr;
+
+	/* Bitmask of writable CTR bits. */
+	unsigned char ctr_writable;
+
+	/* Number of bytes per portword. */
+	int pword;
+
+	/* Not used yet. */
+	int readIntrThreshold;
+	int writeIntrThreshold;
+
+	/* buffer suitable for DMA, if DMA enabled */
+	char *dma_buf;
+	dma_addr_t dma_handle;
+	struct pci_dev *dev;
+};
+
+static inline void parport_gsc_write_data(struct parport *p, unsigned char d)
+{
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_gsc_write_data(%p,0x%02x)\n", p, d);
+#endif
+	parport_writeb(d, DATA(p));
+}
+
+static inline unsigned char parport_gsc_read_data(struct parport *p)
+{
+	unsigned char val = parport_readb (DATA (p));
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG "parport_gsc_read_data(%p) = 0x%02x\n",
+		p, val);
+#endif
+	return val;
+}
+
+/* __parport_gsc_frob_control differs from parport_gsc_frob_control in that
+ * it doesn't do any extra masking. */
+static inline unsigned char __parport_gsc_frob_control(struct parport *p,
+							unsigned char mask,
+							unsigned char val)
+{
+	struct parport_gsc_private *priv = p->physport->private_data;
+	unsigned char ctr = priv->ctr;
+#ifdef DEBUG_PARPORT
+	printk (KERN_DEBUG
+		"__parport_gsc_frob_control(%02x,%02x): %02x -> %02x\n",
+		mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+#endif
+	ctr = (ctr & ~mask) ^ val;
+	ctr &= priv->ctr_writable; /* only write writable bits. */
+	parport_writeb (ctr, CONTROL (p));
+	priv->ctr = ctr;	/* Update soft copy */
+	return ctr;
+}
+
+static inline void parport_gsc_data_reverse(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x20, 0x20);
+}
+
+static inline void parport_gsc_data_forward(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x20, 0x00);
+}
+
+static inline void parport_gsc_write_control(struct parport *p,
+						 unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (d & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+			p->name, p->cad->name);
+		parport_gsc_data_reverse (p);
+	}
+
+	__parport_gsc_frob_control (p, wm, d & wm);
+}
+
+static inline unsigned char parport_gsc_read_control(struct parport *p)
+{
+	const unsigned char rm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+	const struct parport_gsc_private *priv = p->physport->private_data;
+	return priv->ctr & rm; /* Use soft copy */
+}
+
+static inline unsigned char parport_gsc_frob_control(struct parport *p,
+							unsigned char mask,
+							unsigned char val)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	/* Take this out when drivers have adapted to newer interface. */
+	if (mask & 0x20) {
+		printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
+			p->name, p->cad->name,
+			(val & 0x20) ? "reverse" : "forward");
+		if (val & 0x20)
+			parport_gsc_data_reverse (p);
+		else
+			parport_gsc_data_forward (p);
+	}
+
+	/* Restrict mask and val to control lines. */
+	mask &= wm;
+	val &= wm;
+
+	return __parport_gsc_frob_control (p, mask, val);
+}
+
+static inline unsigned char parport_gsc_read_status(struct parport *p)
+{
+	return parport_readb (STATUS(p));
+}
+
+static inline void parport_gsc_disable_irq(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x10, 0x00);
+}
+
+static inline void parport_gsc_enable_irq(struct parport *p)
+{
+	__parport_gsc_frob_control (p, 0x10, 0x10);
+}
+
+extern void parport_gsc_release_resources(struct parport *p);
+
+extern int parport_gsc_claim_resources(struct parport *p);
+
+extern void parport_gsc_init_state(struct pardevice *, struct parport_state *s);
+
+extern void parport_gsc_save_state(struct parport *p, struct parport_state *s);
+
+extern void parport_gsc_restore_state(struct parport *p, struct parport_state *s);
+
+extern void parport_gsc_inc_use_count(void);
+
+extern void parport_gsc_dec_use_count(void);
+
+extern struct parport *parport_gsc_probe_port(unsigned long base,
+						unsigned long base_hi,
+						int irq, int dma,
+						struct pci_dev *dev);
+
+#endif	/* __DRIVERS_PARPORT_PARPORT_GSC_H */
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
new file mode 100644
index 00000000..d4716273
--- /dev/null
+++ b/drivers/parport/parport_ip32.c
@@ -0,0 +1,2250 @@
+/* Low-level parallel port routines for built-in port on SGI IP32
+ *
+ * Author: Arnaud Giersch <arnaud.giersch@free.fr>
+ *
+ * Based on parport_pc.c by
+ *	Phil Blundell, Tim Waugh, Jose Renau, David Campbell,
+ *	Andrea Arcangeli, et al.
+ *
+ * Thanks to Ilya A. Volynets-Evenbakh for his help.
+ *
+ * Copyright (C) 2005, 2006 Arnaud Giersch.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Current status:
+ *
+ *	Basic SPP and PS2 modes are supported.
+ *	Support for parallel port IRQ is present.
+ *	Hardware SPP (a.k.a. compatibility), EPP, and ECP modes are
+ *	supported.
+ *	SPP/ECP FIFO can be driven in PIO or DMA mode.  PIO mode can work with
+ *	or without interrupt support.
+ *
+ *	Hardware ECP mode is not fully implemented (ecp_read_data and
+ *	ecp_write_addr are actually missing).
+ *
+ * To do:
+ *
+ *	Fully implement ECP mode.
+ *	EPP and ECP mode need to be tested.  I currently do not own any
+ *	peripheral supporting these extended mode, and cannot test them.
+ *	If DMA mode works well, decide if support for PIO FIFO modes should be
+ *	dropped.
+ *	Use the io{read,write} family functions when they become available in
+ *	the linux-mips.org tree.  Note: the MIPS specific functions readsb()
+ *	and writesb() are to be translated by ioread8_rep() and iowrite8_rep()
+ *	respectively.
+ */
+
+/* The built-in parallel port on the SGI 02 workstation (a.k.a. IP32) is an
+ * IEEE 1284 parallel port driven by a Texas Instrument TL16PIR552PH chip[1].
+ * This chip supports SPP, bidirectional, EPP and ECP modes.  It has a 16 byte
+ * FIFO buffer and supports DMA transfers.
+ *
+ * [1] http://focus.ti.com/docs/prod/folders/print/tl16pir552.html
+ *
+ * Theoretically, we could simply use the parport_pc module.  It is however
+ * not so simple.  The parport_pc code assumes that the parallel port
+ * registers are port-mapped.  On the O2, they are memory-mapped.
+ * Furthermore, each register is replicated on 256 consecutive addresses (as
+ * it is for the built-in serial ports on the same chip).
+ */
+
+/*--- Some configuration defines ---------------------------------------*/
+
+/* DEBUG_PARPORT_IP32
+ *	0	disable debug
+ *	1	standard level: pr_debug1 is enabled
+ *	2	parport_ip32_dump_state is enabled
+ *	>=3	verbose level: pr_debug is enabled
+ */
+#if !defined(DEBUG_PARPORT_IP32)
+#	define DEBUG_PARPORT_IP32  0	/* 0 (disabled) for production */
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* Setup DEBUG macros.  This is done before any includes, just in case we
+ * activate pr_debug() with DEBUG_PARPORT_IP32 >= 3.
+ */
+#if DEBUG_PARPORT_IP32 == 1
+#	warning DEBUG_PARPORT_IP32 == 1
+#elif DEBUG_PARPORT_IP32 == 2
+#	warning DEBUG_PARPORT_IP32 == 2
+#elif DEBUG_PARPORT_IP32 >= 3
+#	warning DEBUG_PARPORT_IP32 >= 3
+#	if !defined(DEBUG)
+#		define DEBUG /* enable pr_debug() in kernel.h */
+#	endif
+#endif
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+/*--- Global variables -------------------------------------------------*/
+
+/* Verbose probing on by default for debugging. */
+#if DEBUG_PARPORT_IP32 >= 1
+#	define DEFAULT_VERBOSE_PROBING	1
+#else
+#	define DEFAULT_VERBOSE_PROBING	0
+#endif
+
+/* Default prefix for printk */
+#define PPIP32 "parport_ip32: "
+
+/*
+ * These are the module parameters:
+ * @features:		bit mask of features to enable/disable
+ *			(all enabled by default)
+ * @verbose_probing:	log chit-chat during initialization
+ */
+#define PARPORT_IP32_ENABLE_IRQ	(1U << 0)
+#define PARPORT_IP32_ENABLE_DMA	(1U << 1)
+#define PARPORT_IP32_ENABLE_SPP	(1U << 2)
+#define PARPORT_IP32_ENABLE_EPP	(1U << 3)
+#define PARPORT_IP32_ENABLE_ECP	(1U << 4)
+static unsigned int features =	~0U;
+static bool verbose_probing =	DEFAULT_VERBOSE_PROBING;
+
+/* We do not support more than one port. */
+static struct parport *this_port = NULL;
+
+/* Timing constants for FIFO modes.  */
+#define FIFO_NFAULT_TIMEOUT	100	/* milliseconds */
+#define FIFO_POLLING_INTERVAL	50	/* microseconds */
+
+/*--- I/O register definitions -----------------------------------------*/
+
+/**
+ * struct parport_ip32_regs - virtual addresses of parallel port registers
+ * @data:	Data Register
+ * @dsr:	Device Status Register
+ * @dcr:	Device Control Register
+ * @eppAddr:	EPP Address Register
+ * @eppData0:	EPP Data Register 0
+ * @eppData1:	EPP Data Register 1
+ * @eppData2:	EPP Data Register 2
+ * @eppData3:	EPP Data Register 3
+ * @ecpAFifo:	ECP Address FIFO
+ * @fifo:	General FIFO register.  The same address is used for:
+ *		- cFifo, the Parallel Port DATA FIFO
+ *		- ecpDFifo, the ECP Data FIFO
+ *		- tFifo, the ECP Test FIFO
+ * @cnfgA:	Configuration Register A
+ * @cnfgB:	Configuration Register B
+ * @ecr:	Extended Control Register
+ */
+struct parport_ip32_regs {
+	void __iomem *data;
+	void __iomem *dsr;
+	void __iomem *dcr;
+	void __iomem *eppAddr;
+	void __iomem *eppData0;
+	void __iomem *eppData1;
+	void __iomem *eppData2;
+	void __iomem *eppData3;
+	void __iomem *ecpAFifo;
+	void __iomem *fifo;
+	void __iomem *cnfgA;
+	void __iomem *cnfgB;
+	void __iomem *ecr;
+};
+
+/* Device Status Register */
+#define DSR_nBUSY		(1U << 7)	/* PARPORT_STATUS_BUSY */
+#define DSR_nACK		(1U << 6)	/* PARPORT_STATUS_ACK */
+#define DSR_PERROR		(1U << 5)	/* PARPORT_STATUS_PAPEROUT */
+#define DSR_SELECT		(1U << 4)	/* PARPORT_STATUS_SELECT */
+#define DSR_nFAULT		(1U << 3)	/* PARPORT_STATUS_ERROR */
+#define DSR_nPRINT		(1U << 2)	/* specific to TL16PIR552 */
+/* #define DSR_reserved		(1U << 1) */
+#define DSR_TIMEOUT		(1U << 0)	/* EPP timeout */
+
+/* Device Control Register */
+/* #define DCR_reserved		(1U << 7) | (1U <<  6) */
+#define DCR_DIR			(1U << 5)	/* direction */
+#define DCR_IRQ			(1U << 4)	/* interrupt on nAck */
+#define DCR_SELECT		(1U << 3)	/* PARPORT_CONTROL_SELECT */
+#define DCR_nINIT		(1U << 2)	/* PARPORT_CONTROL_INIT */
+#define DCR_AUTOFD		(1U << 1)	/* PARPORT_CONTROL_AUTOFD */
+#define DCR_STROBE		(1U << 0)	/* PARPORT_CONTROL_STROBE */
+
+/* ECP Configuration Register A */
+#define CNFGA_IRQ		(1U << 7)
+#define CNFGA_ID_MASK		((1U << 6) | (1U << 5) | (1U << 4))
+#define CNFGA_ID_SHIFT		4
+#define CNFGA_ID_16		(00U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_8		(01U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_32		(02U << CNFGA_ID_SHIFT)
+/* #define CNFGA_reserved	(1U << 3) */
+#define CNFGA_nBYTEINTRANS	(1U << 2)
+#define CNFGA_PWORDLEFT		((1U << 1) | (1U << 0))
+
+/* ECP Configuration Register B */
+#define CNFGB_COMPRESS		(1U << 7)
+#define CNFGB_INTRVAL		(1U << 6)
+#define CNFGB_IRQ_MASK		((1U << 5) | (1U << 4) | (1U << 3))
+#define CNFGB_IRQ_SHIFT		3
+#define CNFGB_DMA_MASK		((1U << 2) | (1U << 1) | (1U << 0))
+#define CNFGB_DMA_SHIFT		0
+
+/* Extended Control Register */
+#define ECR_MODE_MASK		((1U << 7) | (1U << 6) | (1U << 5))
+#define ECR_MODE_SHIFT		5
+#define ECR_MODE_SPP		(00U << ECR_MODE_SHIFT)
+#define ECR_MODE_PS2		(01U << ECR_MODE_SHIFT)
+#define ECR_MODE_PPF		(02U << ECR_MODE_SHIFT)
+#define ECR_MODE_ECP		(03U << ECR_MODE_SHIFT)
+#define ECR_MODE_EPP		(04U << ECR_MODE_SHIFT)
+/* #define ECR_MODE_reserved	(05U << ECR_MODE_SHIFT) */
+#define ECR_MODE_TST		(06U << ECR_MODE_SHIFT)
+#define ECR_MODE_CFG		(07U << ECR_MODE_SHIFT)
+#define ECR_nERRINTR		(1U << 4)
+#define ECR_DMAEN		(1U << 3)
+#define ECR_SERVINTR		(1U << 2)
+#define ECR_F_FULL		(1U << 1)
+#define ECR_F_EMPTY		(1U << 0)
+
+/*--- Private data -----------------------------------------------------*/
+
+/**
+ * enum parport_ip32_irq_mode - operation mode of interrupt handler
+ * @PARPORT_IP32_IRQ_FWD:	forward interrupt to the upper parport layer
+ * @PARPORT_IP32_IRQ_HERE:	interrupt is handled locally
+ */
+enum parport_ip32_irq_mode { PARPORT_IP32_IRQ_FWD, PARPORT_IP32_IRQ_HERE };
+
+/**
+ * struct parport_ip32_private - private stuff for &struct parport
+ * @regs:		register addresses
+ * @dcr_cache:		cached contents of DCR
+ * @dcr_writable:	bit mask of writable DCR bits
+ * @pword:		number of bytes per PWord
+ * @fifo_depth:		number of PWords that FIFO will hold
+ * @readIntrThreshold:	minimum number of PWords we can read
+ *			if we get an interrupt
+ * @writeIntrThreshold:	minimum number of PWords we can write
+ *			if we get an interrupt
+ * @irq_mode:		operation mode of interrupt handler for this port
+ * @irq_complete:	mutex used to wait for an interrupt to occur
+ */
+struct parport_ip32_private {
+	struct parport_ip32_regs	regs;
+	unsigned int			dcr_cache;
+	unsigned int			dcr_writable;
+	unsigned int			pword;
+	unsigned int			fifo_depth;
+	unsigned int			readIntrThreshold;
+	unsigned int			writeIntrThreshold;
+	enum parport_ip32_irq_mode	irq_mode;
+	struct completion		irq_complete;
+};
+
+/*--- Debug code -------------------------------------------------------*/
+
+/*
+ * pr_debug1 - print debug messages
+ *
+ * This is like pr_debug(), but is defined for %DEBUG_PARPORT_IP32 >= 1
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+#	define pr_debug1(...)	printk(KERN_DEBUG __VA_ARGS__)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+#	define pr_debug1(...)	do { } while (0)
+#endif
+
+/*
+ * pr_trace, pr_trace1 - trace function calls
+ * @p:		pointer to &struct parport
+ * @fmt:	printk format string
+ * @...:	parameters for format string
+ *
+ * Macros used to trace function calls.  The given string is formatted after
+ * function name.  pr_trace() uses pr_debug(), and pr_trace1() uses
+ * pr_debug1().  __pr_trace() is the low-level macro and is not to be used
+ * directly.
+ */
+#define __pr_trace(pr, p, fmt, ...)					\
+	pr("%s: %s" fmt "\n",						\
+	   ({ const struct parport *__p = (p);				\
+		   __p ? __p->name : "parport_ip32"; }),		\
+	   __func__ , ##__VA_ARGS__)
+#define pr_trace(p, fmt, ...)	__pr_trace(pr_debug, p, fmt , ##__VA_ARGS__)
+#define pr_trace1(p, fmt, ...)	__pr_trace(pr_debug1, p, fmt , ##__VA_ARGS__)
+
+/*
+ * __pr_probe, pr_probe - print message if @verbose_probing is true
+ * @p:		pointer to &struct parport
+ * @fmt:	printk format string
+ * @...:	parameters for format string
+ *
+ * For new lines, use pr_probe().  Use __pr_probe() for continued lines.
+ */
+#define __pr_probe(...)							\
+	do { if (verbose_probing) printk(__VA_ARGS__); } while (0)
+#define pr_probe(p, fmt, ...)						\
+	__pr_probe(KERN_INFO PPIP32 "0x%lx: " fmt, (p)->base , ##__VA_ARGS__)
+
+/*
+ * parport_ip32_dump_state - print register status of parport
+ * @p:		pointer to &struct parport
+ * @str:	string to add in message
+ * @show_ecp_config:	shall we dump ECP configuration registers too?
+ *
+ * This function is only here for debugging purpose, and should be used with
+ * care.  Reading the parallel port registers may have undesired side effects.
+ * Especially if @show_ecp_config is true, the parallel port is resetted.
+ * This function is only defined if %DEBUG_PARPORT_IP32 >= 2.
+ */
+#if DEBUG_PARPORT_IP32 >= 2
+static void parport_ip32_dump_state(struct parport *p, char *str,
+				    unsigned int show_ecp_config)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int i;
+
+	printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str);
+	{
+		static const char ecr_modes[8][4] = {"SPP", "PS2", "PPF",
+						     "ECP", "EPP", "???",
+						     "TST", "CFG"};
+		unsigned int ecr = readb(priv->regs.ecr);
+		printk(KERN_DEBUG PPIP32 "    ecr=0x%02x", ecr);
+		printk(" %s",
+		       ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
+		if (ecr & ECR_nERRINTR)
+			printk(",nErrIntrEn");
+		if (ecr & ECR_DMAEN)
+			printk(",dmaEn");
+		if (ecr & ECR_SERVINTR)
+			printk(",serviceIntr");
+		if (ecr & ECR_F_FULL)
+			printk(",f_full");
+		if (ecr & ECR_F_EMPTY)
+			printk(",f_empty");
+		printk("\n");
+	}
+	if (show_ecp_config) {
+		unsigned int oecr, cnfgA, cnfgB;
+		oecr = readb(priv->regs.ecr);
+		writeb(ECR_MODE_PS2, priv->regs.ecr);
+		writeb(ECR_MODE_CFG, priv->regs.ecr);
+		cnfgA = readb(priv->regs.cnfgA);
+		cnfgB = readb(priv->regs.cnfgB);
+		writeb(ECR_MODE_PS2, priv->regs.ecr);
+		writeb(oecr, priv->regs.ecr);
+		printk(KERN_DEBUG PPIP32 "    cnfgA=0x%02x", cnfgA);
+		printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
+		switch (cnfgA & CNFGA_ID_MASK) {
+		case CNFGA_ID_8:
+			printk(",8 bits");
+			break;
+		case CNFGA_ID_16:
+			printk(",16 bits");
+			break;
+		case CNFGA_ID_32:
+			printk(",32 bits");
+			break;
+		default:
+			printk(",unknown ID");
+			break;
+		}
+		if (!(cnfgA & CNFGA_nBYTEINTRANS))
+			printk(",ByteInTrans");
+		if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
+			printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
+			       ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
+		printk("\n");
+		printk(KERN_DEBUG PPIP32 "    cnfgB=0x%02x", cnfgB);
+		printk(" irq=%u,dma=%u",
+		       (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
+		       (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
+		printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
+		if (cnfgB & CNFGB_COMPRESS)
+			printk(",compress");
+		printk("\n");
+	}
+	for (i = 0; i < 2; i++) {
+		unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
+		printk(KERN_DEBUG PPIP32 "    dcr(%s)=0x%02x",
+		       i ? "soft" : "hard", dcr);
+		printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
+		if (dcr & DCR_IRQ)
+			printk(",ackIntEn");
+		if (!(dcr & DCR_SELECT))
+			printk(",nSelectIn");
+		if (dcr & DCR_nINIT)
+			printk(",nInit");
+		if (!(dcr & DCR_AUTOFD))
+			printk(",nAutoFD");
+		if (!(dcr & DCR_STROBE))
+			printk(",nStrobe");
+		printk("\n");
+	}
+#define sep (f++ ? ',' : ' ')
+	{
+		unsigned int f = 0;
+		unsigned int dsr = readb(priv->regs.dsr);
+		printk(KERN_DEBUG PPIP32 "    dsr=0x%02x", dsr);
+		if (!(dsr & DSR_nBUSY))
+			printk("%cBusy", sep);
+		if (dsr & DSR_nACK)
+			printk("%cnAck", sep);
+		if (dsr & DSR_PERROR)
+			printk("%cPError", sep);
+		if (dsr & DSR_SELECT)
+			printk("%cSelect", sep);
+		if (dsr & DSR_nFAULT)
+			printk("%cnFault", sep);
+		if (!(dsr & DSR_nPRINT))
+			printk("%c(Print)", sep);
+		if (dsr & DSR_TIMEOUT)
+			printk("%cTimeout", sep);
+		printk("\n");
+	}
+#undef sep
+}
+#else /* DEBUG_PARPORT_IP32 < 2 */
+#define parport_ip32_dump_state(...)	do { } while (0)
+#endif
+
+/*
+ * CHECK_EXTRA_BITS - track and log extra bits
+ * @p:		pointer to &struct parport
+ * @b:		byte to inspect
+ * @m:		bit mask of authorized bits
+ *
+ * This is used to track and log extra bits that should not be there in
+ * parport_ip32_write_control() and parport_ip32_frob_control().  It is only
+ * defined if %DEBUG_PARPORT_IP32 >= 1.
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+#define CHECK_EXTRA_BITS(p, b, m)					\
+	do {								\
+		unsigned int __b = (b), __m = (m);			\
+		if (__b & ~__m)						\
+			pr_debug1(PPIP32 "%s: extra bits in %s(%s): "	\
+				  "0x%02x/0x%02x\n",			\
+				  (p)->name, __func__, #b, __b, __m);	\
+	} while (0)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+#define CHECK_EXTRA_BITS(...)	do { } while (0)
+#endif
+
+/*--- IP32 parallel port DMA operations --------------------------------*/
+
+/**
+ * struct parport_ip32_dma_data - private data needed for DMA operation
+ * @dir:	DMA direction (from or to device)
+ * @buf:	buffer physical address
+ * @len:	buffer length
+ * @next:	address of next bytes to DMA transfer
+ * @left:	number of bytes remaining
+ * @ctx:	next context to write (0: context_a; 1: context_b)
+ * @irq_on:	are the DMA IRQs currently enabled?
+ * @lock:	spinlock to protect access to the structure
+ */
+struct parport_ip32_dma_data {
+	enum dma_data_direction		dir;
+	dma_addr_t			buf;
+	dma_addr_t			next;
+	size_t				len;
+	size_t				left;
+	unsigned int			ctx;
+	unsigned int			irq_on;
+	spinlock_t			lock;
+};
+static struct parport_ip32_dma_data parport_ip32_dma;
+
+/**
+ * parport_ip32_dma_setup_context - setup next DMA context
+ * @limit:	maximum data size for the context
+ *
+ * The alignment constraints must be verified in caller function, and the
+ * parameter @limit must be set accordingly.
+ */
+static void parport_ip32_dma_setup_context(unsigned int limit)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&parport_ip32_dma.lock, flags);
+	if (parport_ip32_dma.left > 0) {
+		/* Note: ctxreg is "volatile" here only because
+		 * mace->perif.ctrl.parport.context_a and context_b are
+		 * "volatile".  */
+		volatile u64 __iomem *ctxreg = (parport_ip32_dma.ctx == 0) ?
+			&mace->perif.ctrl.parport.context_a :
+			&mace->perif.ctrl.parport.context_b;
+		u64 count;
+		u64 ctxval;
+		if (parport_ip32_dma.left <= limit) {
+			count = parport_ip32_dma.left;
+			ctxval = MACEPAR_CONTEXT_LASTFLAG;
+		} else {
+			count = limit;
+			ctxval = 0;
+		}
+
+		pr_trace(NULL,
+			 "(%u): 0x%04x:0x%04x, %u -> %u%s",
+			 limit,
+			 (unsigned int)parport_ip32_dma.buf,
+			 (unsigned int)parport_ip32_dma.next,
+			 (unsigned int)count,
+			 parport_ip32_dma.ctx, ctxval ? "*" : "");
+
+		ctxval |= parport_ip32_dma.next &
+			MACEPAR_CONTEXT_BASEADDR_MASK;
+		ctxval |= ((count - 1) << MACEPAR_CONTEXT_DATALEN_SHIFT) &
+			MACEPAR_CONTEXT_DATALEN_MASK;
+		writeq(ctxval, ctxreg);
+		parport_ip32_dma.next += count;
+		parport_ip32_dma.left -= count;
+		parport_ip32_dma.ctx ^= 1U;
+	}
+	/* If there is nothing more to send, disable IRQs to avoid to
+	 * face an IRQ storm which can lock the machine.  Disable them
+	 * only once. */
+	if (parport_ip32_dma.left == 0 && parport_ip32_dma.irq_on) {
+		pr_debug(PPIP32 "IRQ off (ctx)\n");
+		disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+		disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+		parport_ip32_dma.irq_on = 0;
+	}
+	spin_unlock_irqrestore(&parport_ip32_dma.lock, flags);
+}
+
+/**
+ * parport_ip32_dma_interrupt - DMA interrupt handler
+ * @irq:	interrupt number
+ * @dev_id:	unused
+ */
+static irqreturn_t parport_ip32_dma_interrupt(int irq, void *dev_id)
+{
+	if (parport_ip32_dma.left)
+		pr_trace(NULL, "(%d): ctx=%d", irq, parport_ip32_dma.ctx);
+	parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+	return IRQ_HANDLED;
+}
+
+#if DEBUG_PARPORT_IP32
+static irqreturn_t parport_ip32_merr_interrupt(int irq, void *dev_id)
+{
+	pr_trace1(NULL, "(%d)", irq);
+	return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * parport_ip32_dma_start - begins a DMA transfer
+ * @dir:	DMA direction: DMA_TO_DEVICE or DMA_FROM_DEVICE
+ * @addr:	pointer to data buffer
+ * @count:	buffer size
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static int parport_ip32_dma_start(enum dma_data_direction dir,
+				  void *addr, size_t count)
+{
+	unsigned int limit;
+	u64 ctrl;
+
+	pr_trace(NULL, "(%d, %lu)", dir, (unsigned long)count);
+
+	/* FIXME - add support for DMA_FROM_DEVICE.  In this case, buffer must
+	 * be 64 bytes aligned. */
+	BUG_ON(dir != DMA_TO_DEVICE);
+
+	/* Reset DMA controller */
+	ctrl = MACEPAR_CTLSTAT_RESET;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+	/* DMA IRQs should normally be enabled */
+	if (!parport_ip32_dma.irq_on) {
+		WARN_ON(1);
+		enable_irq(MACEISA_PAR_CTXA_IRQ);
+		enable_irq(MACEISA_PAR_CTXB_IRQ);
+		parport_ip32_dma.irq_on = 1;
+	}
+
+	/* Prepare DMA pointers */
+	parport_ip32_dma.dir = dir;
+	parport_ip32_dma.buf = dma_map_single(NULL, addr, count, dir);
+	parport_ip32_dma.len = count;
+	parport_ip32_dma.next = parport_ip32_dma.buf;
+	parport_ip32_dma.left = parport_ip32_dma.len;
+	parport_ip32_dma.ctx = 0;
+
+	/* Setup DMA direction and first two contexts */
+	ctrl = (dir == DMA_TO_DEVICE) ? 0 : MACEPAR_CTLSTAT_DIRECTION;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+	/* Single transfer should not cross a 4K page boundary */
+	limit = MACEPAR_CONTEXT_DATA_BOUND -
+		(parport_ip32_dma.next & (MACEPAR_CONTEXT_DATA_BOUND - 1));
+	parport_ip32_dma_setup_context(limit);
+	parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+
+	/* Real start of DMA transfer */
+	ctrl |= MACEPAR_CTLSTAT_ENABLE;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+	return 0;
+}
+
+/**
+ * parport_ip32_dma_stop - ends a running DMA transfer
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static void parport_ip32_dma_stop(void)
+{
+	u64 ctx_a;
+	u64 ctx_b;
+	u64 ctrl;
+	u64 diag;
+	size_t res[2];	/* {[0] = res_a, [1] = res_b} */
+
+	pr_trace(NULL, "()");
+
+	/* Disable IRQs */
+	spin_lock_irq(&parport_ip32_dma.lock);
+	if (parport_ip32_dma.irq_on) {
+		pr_debug(PPIP32 "IRQ off (stop)\n");
+		disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+		disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+		parport_ip32_dma.irq_on = 0;
+	}
+	spin_unlock_irq(&parport_ip32_dma.lock);
+	/* Force IRQ synchronization, even if the IRQs were disabled
+	 * elsewhere. */
+	synchronize_irq(MACEISA_PAR_CTXA_IRQ);
+	synchronize_irq(MACEISA_PAR_CTXB_IRQ);
+
+	/* Stop DMA transfer */
+	ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+	ctrl &= ~MACEPAR_CTLSTAT_ENABLE;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+	/* Adjust residue (parport_ip32_dma.left) */
+	ctx_a = readq(&mace->perif.ctrl.parport.context_a);
+	ctx_b = readq(&mace->perif.ctrl.parport.context_b);
+	ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+	diag = readq(&mace->perif.ctrl.parport.diagnostic);
+	res[0] = (ctrl & MACEPAR_CTLSTAT_CTXA_VALID) ?
+		1 + ((ctx_a & MACEPAR_CONTEXT_DATALEN_MASK) >>
+		     MACEPAR_CONTEXT_DATALEN_SHIFT) :
+		0;
+	res[1] = (ctrl & MACEPAR_CTLSTAT_CTXB_VALID) ?
+		1 + ((ctx_b & MACEPAR_CONTEXT_DATALEN_MASK) >>
+		     MACEPAR_CONTEXT_DATALEN_SHIFT) :
+		0;
+	if (diag & MACEPAR_DIAG_DMACTIVE)
+		res[(diag & MACEPAR_DIAG_CTXINUSE) != 0] =
+			1 + ((diag & MACEPAR_DIAG_CTRMASK) >>
+			     MACEPAR_DIAG_CTRSHIFT);
+	parport_ip32_dma.left += res[0] + res[1];
+
+	/* Reset DMA controller, and re-enable IRQs */
+	ctrl = MACEPAR_CTLSTAT_RESET;
+	writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+	pr_debug(PPIP32 "IRQ on (stop)\n");
+	enable_irq(MACEISA_PAR_CTXA_IRQ);
+	enable_irq(MACEISA_PAR_CTXB_IRQ);
+	parport_ip32_dma.irq_on = 1;
+
+	dma_unmap_single(NULL, parport_ip32_dma.buf, parport_ip32_dma.len,
+			 parport_ip32_dma.dir);
+}
+
+/**
+ * parport_ip32_dma_get_residue - get residue from last DMA transfer
+ *
+ * Returns the number of bytes remaining from last DMA transfer.
+ */
+static inline size_t parport_ip32_dma_get_residue(void)
+{
+	return parport_ip32_dma.left;
+}
+
+/**
+ * parport_ip32_dma_register - initialize DMA engine
+ *
+ * Returns zero for success.
+ */
+static int parport_ip32_dma_register(void)
+{
+	int err;
+
+	spin_lock_init(&parport_ip32_dma.lock);
+	parport_ip32_dma.irq_on = 1;
+
+	/* Reset DMA controller */
+	writeq(MACEPAR_CTLSTAT_RESET, &mace->perif.ctrl.parport.cntlstat);
+
+	/* Request IRQs */
+	err = request_irq(MACEISA_PAR_CTXA_IRQ, parport_ip32_dma_interrupt,
+			  0, "parport_ip32", NULL);
+	if (err)
+		goto fail_a;
+	err = request_irq(MACEISA_PAR_CTXB_IRQ, parport_ip32_dma_interrupt,
+			  0, "parport_ip32", NULL);
+	if (err)
+		goto fail_b;
+#if DEBUG_PARPORT_IP32
+	/* FIXME - what is this IRQ for? */
+	err = request_irq(MACEISA_PAR_MERR_IRQ, parport_ip32_merr_interrupt,
+			  0, "parport_ip32", NULL);
+	if (err)
+		goto fail_merr;
+#endif
+	return 0;
+
+#if DEBUG_PARPORT_IP32
+fail_merr:
+	free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+#endif
+fail_b:
+	free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+fail_a:
+	return err;
+}
+
+/**
+ * parport_ip32_dma_unregister - release and free resources for DMA engine
+ */
+static void parport_ip32_dma_unregister(void)
+{
+#if DEBUG_PARPORT_IP32
+	free_irq(MACEISA_PAR_MERR_IRQ, NULL);
+#endif
+	free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+	free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+}
+
+/*--- Interrupt handlers and associates --------------------------------*/
+
+/**
+ * parport_ip32_wakeup - wakes up code waiting for an interrupt
+ * @p:		pointer to &struct parport
+ */
+static inline void parport_ip32_wakeup(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	complete(&priv->irq_complete);
+}
+
+/**
+ * parport_ip32_interrupt - interrupt handler
+ * @irq:	interrupt number
+ * @dev_id:	pointer to &struct parport
+ *
+ * Caught interrupts are forwarded to the upper parport layer if IRQ_mode is
+ * %PARPORT_IP32_IRQ_FWD.
+ */
+static irqreturn_t parport_ip32_interrupt(int irq, void *dev_id)
+{
+	struct parport * const p = dev_id;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	enum parport_ip32_irq_mode irq_mode = priv->irq_mode;
+
+	switch (irq_mode) {
+	case PARPORT_IP32_IRQ_FWD:
+		return parport_irq_handler(irq, dev_id);
+
+	case PARPORT_IP32_IRQ_HERE:
+		parport_ip32_wakeup(p);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*--- Some utility function to manipulate ECR register -----------------*/
+
+/**
+ * parport_ip32_read_econtrol - read contents of the ECR register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned int parport_ip32_read_econtrol(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return readb(priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_write_econtrol - write new contents to the ECR register
+ * @p:		pointer to &struct parport
+ * @c:		new value to write
+ */
+static inline void parport_ip32_write_econtrol(struct parport *p,
+					       unsigned int c)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	writeb(c, priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_frob_econtrol - change bits from the ECR register
+ * @p:		pointer to &struct parport
+ * @mask:	bit mask of bits to change
+ * @val:	new value for changed bits
+ *
+ * Read from the ECR, mask out the bits in @mask, exclusive-or with the bits
+ * in @val, and write the result to the ECR.
+ */
+static inline void parport_ip32_frob_econtrol(struct parport *p,
+					      unsigned int mask,
+					      unsigned int val)
+{
+	unsigned int c;
+	c = (parport_ip32_read_econtrol(p) & ~mask) ^ val;
+	parport_ip32_write_econtrol(p, c);
+}
+
+/**
+ * parport_ip32_set_mode - change mode of ECP port
+ * @p:		pointer to &struct parport
+ * @mode:	new mode to write in ECR
+ *
+ * ECR is reset in a sane state (interrupts and DMA disabled), and placed in
+ * mode @mode.  Go through PS2 mode if needed.
+ */
+static void parport_ip32_set_mode(struct parport *p, unsigned int mode)
+{
+	unsigned int omode;
+
+	mode &= ECR_MODE_MASK;
+	omode = parport_ip32_read_econtrol(p) & ECR_MODE_MASK;
+
+	if (!(mode == ECR_MODE_SPP || mode == ECR_MODE_PS2
+	      || omode == ECR_MODE_SPP || omode == ECR_MODE_PS2)) {
+		/* We have to go through PS2 mode */
+		unsigned int ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+		parport_ip32_write_econtrol(p, ecr);
+	}
+	parport_ip32_write_econtrol(p, mode | ECR_nERRINTR | ECR_SERVINTR);
+}
+
+/*--- Basic functions needed for parport -------------------------------*/
+
+/**
+ * parport_ip32_read_data - return current contents of the DATA register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_data(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return readb(priv->regs.data);
+}
+
+/**
+ * parport_ip32_write_data - set new contents for the DATA register
+ * @p:		pointer to &struct parport
+ * @d:		new value to write
+ */
+static inline void parport_ip32_write_data(struct parport *p, unsigned char d)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	writeb(d, priv->regs.data);
+}
+
+/**
+ * parport_ip32_read_status - return current contents of the DSR register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_status(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return readb(priv->regs.dsr);
+}
+
+/**
+ * __parport_ip32_read_control - return cached contents of the DCR register
+ * @p:		pointer to &struct parport
+ */
+static inline unsigned int __parport_ip32_read_control(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return priv->dcr_cache; /* use soft copy */
+}
+
+/**
+ * __parport_ip32_write_control - set new contents for the DCR register
+ * @p:		pointer to &struct parport
+ * @c:		new value to write
+ */
+static inline void __parport_ip32_write_control(struct parport *p,
+						unsigned int c)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	CHECK_EXTRA_BITS(p, c, priv->dcr_writable);
+	c &= priv->dcr_writable; /* only writable bits */
+	writeb(c, priv->regs.dcr);
+	priv->dcr_cache = c;		/* update soft copy */
+}
+
+/**
+ * __parport_ip32_frob_control - change bits from the DCR register
+ * @p:		pointer to &struct parport
+ * @mask:	bit mask of bits to change
+ * @val:	new value for changed bits
+ *
+ * This is equivalent to read from the DCR, mask out the bits in @mask,
+ * exclusive-or with the bits in @val, and write the result to the DCR.
+ * Actually, the cached contents of the DCR is used.
+ */
+static inline void __parport_ip32_frob_control(struct parport *p,
+					       unsigned int mask,
+					       unsigned int val)
+{
+	unsigned int c;
+	c = (__parport_ip32_read_control(p) & ~mask) ^ val;
+	__parport_ip32_write_control(p, c);
+}
+
+/**
+ * parport_ip32_read_control - return cached contents of the DCR register
+ * @p:		pointer to &struct parport
+ *
+ * The return value is masked so as to only return the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_read_control(struct parport *p)
+{
+	const unsigned int rm =
+		DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+	return __parport_ip32_read_control(p) & rm;
+}
+
+/**
+ * parport_ip32_write_control - set new contents for the DCR register
+ * @p:		pointer to &struct parport
+ * @c:		new value to write
+ *
+ * The value is masked so as to only change the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline void parport_ip32_write_control(struct parport *p,
+					      unsigned char c)
+{
+	const unsigned int wm =
+		DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+	CHECK_EXTRA_BITS(p, c, wm);
+	__parport_ip32_frob_control(p, wm, c & wm);
+}
+
+/**
+ * parport_ip32_frob_control - change bits from the DCR register
+ * @p:		pointer to &struct parport
+ * @mask:	bit mask of bits to change
+ * @val:	new value for changed bits
+ *
+ * This differs from __parport_ip32_frob_control() in that it only allows to
+ * change the value of %DCR_STROBE, %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_frob_control(struct parport *p,
+						      unsigned char mask,
+						      unsigned char val)
+{
+	const unsigned int wm =
+		DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+	CHECK_EXTRA_BITS(p, mask, wm);
+	CHECK_EXTRA_BITS(p, val, wm);
+	__parport_ip32_frob_control(p, mask & wm, val & wm);
+	return parport_ip32_read_control(p);
+}
+
+/**
+ * parport_ip32_disable_irq - disable interrupts on the rising edge of nACK
+ * @p:		pointer to &struct parport
+ */
+static inline void parport_ip32_disable_irq(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_IRQ, 0);
+}
+
+/**
+ * parport_ip32_enable_irq - enable interrupts on the rising edge of nACK
+ * @p:		pointer to &struct parport
+ */
+static inline void parport_ip32_enable_irq(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_IRQ, DCR_IRQ);
+}
+
+/**
+ * parport_ip32_data_forward - enable host-to-peripheral communications
+ * @p:		pointer to &struct parport
+ *
+ * Enable the data line drivers, for 8-bit host-to-peripheral communications.
+ */
+static inline void parport_ip32_data_forward(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_DIR, 0);
+}
+
+/**
+ * parport_ip32_data_reverse - enable peripheral-to-host communications
+ * @p:		pointer to &struct parport
+ *
+ * Place the data bus in a high impedance state, if @p->modes has the
+ * PARPORT_MODE_TRISTATE bit set.
+ */
+static inline void parport_ip32_data_reverse(struct parport *p)
+{
+	__parport_ip32_frob_control(p, DCR_DIR, DCR_DIR);
+}
+
+/**
+ * parport_ip32_init_state - for core parport code
+ * @dev:	pointer to &struct pardevice
+ * @s:		pointer to &struct parport_state to initialize
+ */
+static void parport_ip32_init_state(struct pardevice *dev,
+				    struct parport_state *s)
+{
+	s->u.ip32.dcr = DCR_SELECT | DCR_nINIT;
+	s->u.ip32.ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+}
+
+/**
+ * parport_ip32_save_state - for core parport code
+ * @p:		pointer to &struct parport
+ * @s:		pointer to &struct parport_state to save state to
+ */
+static void parport_ip32_save_state(struct parport *p,
+				    struct parport_state *s)
+{
+	s->u.ip32.dcr = __parport_ip32_read_control(p);
+	s->u.ip32.ecr = parport_ip32_read_econtrol(p);
+}
+
+/**
+ * parport_ip32_restore_state - for core parport code
+ * @p:		pointer to &struct parport
+ * @s:		pointer to &struct parport_state to restore state from
+ */
+static void parport_ip32_restore_state(struct parport *p,
+				       struct parport_state *s)
+{
+	parport_ip32_set_mode(p, s->u.ip32.ecr & ECR_MODE_MASK);
+	parport_ip32_write_econtrol(p, s->u.ip32.ecr);
+	__parport_ip32_write_control(p, s->u.ip32.dcr);
+}
+
+/*--- EPP mode functions -----------------------------------------------*/
+
+/**
+ * parport_ip32_clear_epp_timeout - clear Timeout bit in EPP mode
+ * @p:		pointer to &struct parport
+ *
+ * Returns 1 if the Timeout bit is clear, and 0 otherwise.
+ */
+static unsigned int parport_ip32_clear_epp_timeout(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int cleared;
+
+	if (!(parport_ip32_read_status(p) & DSR_TIMEOUT))
+		cleared = 1;
+	else {
+		unsigned int r;
+		/* To clear timeout some chips require double read */
+		parport_ip32_read_status(p);
+		r = parport_ip32_read_status(p);
+		/* Some reset by writing 1 */
+		writeb(r | DSR_TIMEOUT, priv->regs.dsr);
+		/* Others by writing 0 */
+		writeb(r & ~DSR_TIMEOUT, priv->regs.dsr);
+
+		r = parport_ip32_read_status(p);
+		cleared = !(r & DSR_TIMEOUT);
+	}
+
+	pr_trace(p, "(): %s", cleared ? "cleared" : "failed");
+	return cleared;
+}
+
+/**
+ * parport_ip32_epp_read - generic EPP read function
+ * @eppreg:	I/O register to read from
+ * @p:		pointer to &struct parport
+ * @buf:	buffer to store read data
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read(void __iomem *eppreg,
+				    struct parport *p, void *buf,
+				    size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	size_t got;
+	parport_ip32_set_mode(p, ECR_MODE_EPP);
+	parport_ip32_data_reverse(p);
+	parport_ip32_write_control(p, DCR_nINIT);
+	if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+		readsb(eppreg, buf, len);
+		if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+			parport_ip32_clear_epp_timeout(p);
+			return -EIO;
+		}
+		got = len;
+	} else {
+		u8 *bufp = buf;
+		for (got = 0; got < len; got++) {
+			*bufp++ = readb(eppreg);
+			if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+				parport_ip32_clear_epp_timeout(p);
+				break;
+			}
+		}
+	}
+	parport_ip32_data_forward(p);
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	return got;
+}
+
+/**
+ * parport_ip32_epp_write - generic EPP write function
+ * @eppreg:	I/O register to write to
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write(void __iomem *eppreg,
+				     struct parport *p, const void *buf,
+				     size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	size_t written;
+	parport_ip32_set_mode(p, ECR_MODE_EPP);
+	parport_ip32_data_forward(p);
+	parport_ip32_write_control(p, DCR_nINIT);
+	if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+		writesb(eppreg, buf, len);
+		if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+			parport_ip32_clear_epp_timeout(p);
+			return -EIO;
+		}
+		written = len;
+	} else {
+		const u8 *bufp = buf;
+		for (written = 0; written < len; written++) {
+			writeb(*bufp++, eppreg);
+			if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+				parport_ip32_clear_epp_timeout(p);
+				break;
+			}
+		}
+	}
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	return written;
+}
+
+/**
+ * parport_ip32_epp_read_data - read a block of data in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer to store read data
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_data(struct parport *p, void *buf,
+					 size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_read(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_data - write a block of data in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_data(struct parport *p, const void *buf,
+					  size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_write(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_read_addr - read a block of addresses in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer to store read data
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_addr(struct parport *p, void *buf,
+					 size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_read(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_addr - write a block of addresses in EPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_addr(struct parport *p, const void *buf,
+					  size_t len, int flags)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	return parport_ip32_epp_write(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/*--- ECP mode functions (FIFO) ----------------------------------------*/
+
+/**
+ * parport_ip32_fifo_wait_break - check if the waiting function should return
+ * @p:		pointer to &struct parport
+ * @expire:	timeout expiring date, in jiffies
+ *
+ * parport_ip32_fifo_wait_break() checks if the waiting function should return
+ * immediately or not.  The break conditions are:
+ *	- expired timeout;
+ *	- a pending signal;
+ *	- nFault asserted low.
+ * This function also calls cond_resched().
+ */
+static unsigned int parport_ip32_fifo_wait_break(struct parport *p,
+						 unsigned long expire)
+{
+	cond_resched();
+	if (time_after(jiffies, expire)) {
+		pr_debug1(PPIP32 "%s: FIFO write timed out\n", p->name);
+		return 1;
+	}
+	if (signal_pending(current)) {
+		pr_debug1(PPIP32 "%s: Signal pending\n", p->name);
+		return 1;
+	}
+	if (!(parport_ip32_read_status(p) & DSR_nFAULT)) {
+		pr_debug1(PPIP32 "%s: nFault asserted low\n", p->name);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * parport_ip32_fwp_wait_polling - wait for FIFO to empty (polling)
+ * @p:		pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO.  A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_polling(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	unsigned long expire;
+	unsigned int count;
+	unsigned int ecr;
+
+	expire = jiffies + physport->cad->timeout;
+	count = 0;
+	while (1) {
+		if (parport_ip32_fifo_wait_break(p, expire))
+			break;
+
+		/* Check FIFO state.  We do nothing when the FIFO is nor full,
+		 * nor empty.  It appears that the FIFO full bit is not always
+		 * reliable, the FIFO state is sometimes wrongly reported, and
+		 * the chip gets confused if we give it another byte. */
+		ecr = parport_ip32_read_econtrol(p);
+		if (ecr & ECR_F_EMPTY) {
+			/* FIFO is empty, fill it up */
+			count = priv->fifo_depth;
+			break;
+		}
+
+		/* Wait a moment... */
+		udelay(FIFO_POLLING_INTERVAL);
+	} /* while (1) */
+
+	return count;
+}
+
+/**
+ * parport_ip32_fwp_wait_interrupt - wait for FIFO to empty (interrupt-driven)
+ * @p:		pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO.  A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
+{
+	static unsigned int lost_interrupt = 0;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	unsigned long nfault_timeout;
+	unsigned long expire;
+	unsigned int count;
+	unsigned int ecr;
+
+	nfault_timeout = min((unsigned long)physport->cad->timeout,
+			     msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+	expire = jiffies + physport->cad->timeout;
+	count = 0;
+	while (1) {
+		if (parport_ip32_fifo_wait_break(p, expire))
+			break;
+
+		/* Initialize mutex used to take interrupts into account */
+		INIT_COMPLETION(priv->irq_complete);
+
+		/* Enable serviceIntr */
+		parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+		/* Enabling serviceIntr while the FIFO is empty does not
+		 * always generate an interrupt, so check for emptiness
+		 * now. */
+		ecr = parport_ip32_read_econtrol(p);
+		if (!(ecr & ECR_F_EMPTY)) {
+			/* FIFO is not empty: wait for an interrupt or a
+			 * timeout to occur */
+			wait_for_completion_interruptible_timeout(
+				&priv->irq_complete, nfault_timeout);
+			ecr = parport_ip32_read_econtrol(p);
+			if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
+			    && !lost_interrupt) {
+				printk(KERN_WARNING PPIP32
+				       "%s: lost interrupt in %s\n",
+				       p->name, __func__);
+				lost_interrupt = 1;
+			}
+		}
+
+		/* Disable serviceIntr */
+		parport_ip32_frob_econtrol(p, ECR_SERVINTR, ECR_SERVINTR);
+
+		/* Check FIFO state */
+		if (ecr & ECR_F_EMPTY) {
+			/* FIFO is empty, fill it up */
+			count = priv->fifo_depth;
+			break;
+		} else if (ecr & ECR_SERVINTR) {
+			/* FIFO is not empty, but we know that can safely push
+			 * writeIntrThreshold bytes into it */
+			count = priv->writeIntrThreshold;
+			break;
+		}
+		/* FIFO is not empty, and we did not get any interrupt.
+		 * Either it's time to check for nFault, or a signal is
+		 * pending.  This is verified in
+		 * parport_ip32_fifo_wait_break(), so we continue the loop. */
+	} /* while (1) */
+
+	return count;
+}
+
+/**
+ * parport_ip32_fifo_write_block_pio - write a block of data (PIO mode)
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ *
+ * Uses PIO to write the contents of the buffer @buf into the parallel port
+ * FIFO.  Returns the number of bytes that were actually written.  It can work
+ * with or without the help of interrupts.  The parallel port must be
+ * correctly initialized before calling parport_ip32_fifo_write_block_pio().
+ */
+static size_t parport_ip32_fifo_write_block_pio(struct parport *p,
+						const void *buf, size_t len)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	const u8 *bufp = buf;
+	size_t left = len;
+
+	priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+	while (left > 0) {
+		unsigned int count;
+
+		count = (p->irq == PARPORT_IRQ_NONE) ?
+			parport_ip32_fwp_wait_polling(p) :
+			parport_ip32_fwp_wait_interrupt(p);
+		if (count == 0)
+			break;	/* Transmission should be stopped */
+		if (count > left)
+			count = left;
+		if (count == 1) {
+			writeb(*bufp, priv->regs.fifo);
+			bufp++, left--;
+		} else {
+			writesb(priv->regs.fifo, bufp, count);
+			bufp += count, left -= count;
+		}
+	}
+
+	priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+	return len - left;
+}
+
+/**
+ * parport_ip32_fifo_write_block_dma - write a block of data (DMA mode)
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ *
+ * Uses DMA to write the contents of the buffer @buf into the parallel port
+ * FIFO.  Returns the number of bytes that were actually written.  The
+ * parallel port must be correctly initialized before calling
+ * parport_ip32_fifo_write_block_dma().
+ */
+static size_t parport_ip32_fifo_write_block_dma(struct parport *p,
+						const void *buf, size_t len)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	unsigned long nfault_timeout;
+	unsigned long expire;
+	size_t written;
+	unsigned int ecr;
+
+	priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+	parport_ip32_dma_start(DMA_TO_DEVICE, (void *)buf, len);
+	INIT_COMPLETION(priv->irq_complete);
+	parport_ip32_frob_econtrol(p, ECR_DMAEN | ECR_SERVINTR, ECR_DMAEN);
+
+	nfault_timeout = min((unsigned long)physport->cad->timeout,
+			     msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+	expire = jiffies + physport->cad->timeout;
+	while (1) {
+		if (parport_ip32_fifo_wait_break(p, expire))
+			break;
+		wait_for_completion_interruptible_timeout(&priv->irq_complete,
+							  nfault_timeout);
+		ecr = parport_ip32_read_econtrol(p);
+		if (ecr & ECR_SERVINTR)
+			break;	/* DMA transfer just finished */
+	}
+	parport_ip32_dma_stop();
+	written = len - parport_ip32_dma_get_residue();
+
+	priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+	return written;
+}
+
+/**
+ * parport_ip32_fifo_write_block - write a block of data
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ *
+ * Uses PIO or DMA to write the contents of the buffer @buf into the parallel
+ * p FIFO.  Returns the number of bytes that were actually written.
+ */
+static size_t parport_ip32_fifo_write_block(struct parport *p,
+					    const void *buf, size_t len)
+{
+	size_t written = 0;
+	if (len)
+		/* FIXME - Maybe some threshold value should be set for @len
+		 * under which we revert to PIO mode? */
+		written = (p->modes & PARPORT_MODE_DMA) ?
+			parport_ip32_fifo_write_block_dma(p, buf, len) :
+			parport_ip32_fifo_write_block_pio(p, buf, len);
+	return written;
+}
+
+/**
+ * parport_ip32_drain_fifo - wait for FIFO to empty
+ * @p:		pointer to &struct parport
+ * @timeout:	timeout, in jiffies
+ *
+ * This function waits for FIFO to empty.  It returns 1 when FIFO is empty, or
+ * 0 if the timeout @timeout is reached before, or if a signal is pending.
+ */
+static unsigned int parport_ip32_drain_fifo(struct parport *p,
+					    unsigned long timeout)
+{
+	unsigned long expire = jiffies + timeout;
+	unsigned int polling_interval;
+	unsigned int counter;
+
+	/* Busy wait for approx. 200us */
+	for (counter = 0; counter < 40; counter++) {
+		if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+			break;
+		if (time_after(jiffies, expire))
+			break;
+		if (signal_pending(current))
+			break;
+		udelay(5);
+	}
+	/* Poll slowly.  Polling interval starts with 1 millisecond, and is
+	 * increased exponentially until 128.  */
+	polling_interval = 1; /* msecs */
+	while (!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY)) {
+		if (time_after_eq(jiffies, expire))
+			break;
+		msleep_interruptible(polling_interval);
+		if (signal_pending(current))
+			break;
+		if (polling_interval < 128)
+			polling_interval *= 2;
+	}
+
+	return !!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY);
+}
+
+/**
+ * parport_ip32_get_fifo_residue - reset FIFO
+ * @p:		pointer to &struct parport
+ * @mode:	current operation mode (ECR_MODE_PPF or ECR_MODE_ECP)
+ *
+ * This function resets FIFO, and returns the number of bytes remaining in it.
+ */
+static unsigned int parport_ip32_get_fifo_residue(struct parport *p,
+						  unsigned int mode)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int residue;
+	unsigned int cnfga;
+
+	/* FIXME - We are missing one byte if the printer is off-line.  I
+	 * don't know how to detect this.  It looks that the full bit is not
+	 * always reliable.  For the moment, the problem is avoided in most
+	 * cases by testing for BUSY in parport_ip32_compat_write_data().
+	 */
+	if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+		residue = 0;
+	else {
+		pr_debug1(PPIP32 "%s: FIFO is stuck\n", p->name);
+
+		/* Stop all transfers.
+		 *
+		 * Microsoft's document instructs to drive DCR_STROBE to 0,
+		 * but it doesn't work (at least in Compatibility mode, not
+		 * tested in ECP mode).  Switching directly to Test mode (as
+		 * in parport_pc) is not an option: it does confuse the port,
+		 * ECP service interrupts are no more working after that.  A
+		 * hard reset is then needed to revert to a sane state.
+		 *
+		 * Let's hope that the FIFO is really stuck and that the
+		 * peripheral doesn't wake up now.
+		 */
+		parport_ip32_frob_control(p, DCR_STROBE, 0);
+
+		/* Fill up FIFO */
+		for (residue = priv->fifo_depth; residue > 0; residue--) {
+			if (parport_ip32_read_econtrol(p) & ECR_F_FULL)
+				break;
+			writeb(0x00, priv->regs.fifo);
+		}
+	}
+	if (residue)
+		pr_debug1(PPIP32 "%s: %d PWord%s left in FIFO\n",
+			  p->name, residue,
+			  (residue == 1) ? " was" : "s were");
+
+	/* Now reset the FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+
+	/* Host recovery for ECP mode */
+	if (mode == ECR_MODE_ECP) {
+		parport_ip32_data_reverse(p);
+		parport_ip32_frob_control(p, DCR_nINIT, 0);
+		if (parport_wait_peripheral(p, DSR_PERROR, 0))
+			pr_debug1(PPIP32 "%s: PEerror timeout 1 in %s\n",
+				  p->name, __func__);
+		parport_ip32_frob_control(p, DCR_STROBE, DCR_STROBE);
+		parport_ip32_frob_control(p, DCR_nINIT, DCR_nINIT);
+		if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR))
+			pr_debug1(PPIP32 "%s: PEerror timeout 2 in %s\n",
+				  p->name, __func__);
+	}
+
+	/* Adjust residue if needed */
+	parport_ip32_set_mode(p, ECR_MODE_CFG);
+	cnfga = readb(priv->regs.cnfgA);
+	if (!(cnfga & CNFGA_nBYTEINTRANS)) {
+		pr_debug1(PPIP32 "%s: cnfgA contains 0x%02x\n",
+			  p->name, cnfga);
+		pr_debug1(PPIP32 "%s: Accounting for extra byte\n",
+			  p->name);
+		residue++;
+	}
+
+	/* Don't care about partial PWords since we do not support
+	 * PWord != 1 byte. */
+
+	/* Back to forward PS2 mode. */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_data_forward(p);
+
+	return residue;
+}
+
+/**
+ * parport_ip32_compat_write_data - write a block of data in SPP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	ignored
+ */
+static size_t parport_ip32_compat_write_data(struct parport *p,
+					     const void *buf, size_t len,
+					     int flags)
+{
+	static unsigned int ready_before = 1;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	size_t written = 0;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_write_compat(p, buf, len, flags);
+
+	/* Reset FIFO, go in forward mode, and disable ackIntEn */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	parport_ip32_data_forward(p);
+	parport_ip32_disable_irq(p);
+	parport_ip32_set_mode(p, ECR_MODE_PPF);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Wait for peripheral to become ready */
+	if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+				       DSR_nBUSY | DSR_nFAULT)) {
+		/* Avoid to flood the logs */
+		if (ready_before)
+			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+			       p->name, __func__);
+		ready_before = 0;
+		goto stop;
+	}
+	ready_before = 1;
+
+	written = parport_ip32_fifo_write_block(p, buf, len);
+
+	/* Wait FIFO to empty.  Timeout is proportional to FIFO_depth.  */
+	parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+	/* Check for a potential residue */
+	written -= parport_ip32_get_fifo_residue(p, ECR_MODE_PPF);
+
+	/* Then, wait for BUSY to get low. */
+	if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+		printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+		       p->name, __func__);
+
+stop:
+	/* Reset FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_read_data().
+ */
+
+/**
+ * parport_ip32_ecp_write_data - write a block of data in ECP mode
+ * @p:		pointer to &struct parport
+ * @buf:	buffer of data to write
+ * @len:	length of buffer @buf
+ * @flags:	ignored
+ */
+static size_t parport_ip32_ecp_write_data(struct parport *p,
+					  const void *buf, size_t len,
+					  int flags)
+{
+	static unsigned int ready_before = 1;
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport * const physport = p->physport;
+	size_t written = 0;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_ecp_write_data(p, buf, len, flags);
+
+	/* Negotiate to forward mode if necessary. */
+	if (physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+		/* Event 47: Set nInit high. */
+		parport_ip32_frob_control(p, DCR_nINIT | DCR_AUTOFD,
+					     DCR_nINIT | DCR_AUTOFD);
+
+		/* Event 49: PError goes high. */
+		if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
+			printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
+			       p->name, __func__);
+			physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+			return 0;
+		}
+	}
+
+	/* Reset FIFO, go in forward mode, and disable ackIntEn */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	parport_ip32_data_forward(p);
+	parport_ip32_disable_irq(p);
+	parport_ip32_set_mode(p, ECR_MODE_ECP);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Wait for peripheral to become ready */
+	if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+				       DSR_nBUSY | DSR_nFAULT)) {
+		/* Avoid to flood the logs */
+		if (ready_before)
+			printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+			       p->name, __func__);
+		ready_before = 0;
+		goto stop;
+	}
+	ready_before = 1;
+
+	written = parport_ip32_fifo_write_block(p, buf, len);
+
+	/* Wait FIFO to empty.  Timeout is proportional to FIFO_depth.  */
+	parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+	/* Check for a potential residue */
+	written -= parport_ip32_get_fifo_residue(p, ECR_MODE_ECP);
+
+	/* Then, wait for BUSY to get low. */
+	if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+		printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+		       p->name, __func__);
+
+stop:
+	/* Reset FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_write_addr().
+ */
+
+/*--- Default parport operations ---------------------------------------*/
+
+static __initdata struct parport_operations parport_ip32_ops = {
+	.write_data		= parport_ip32_write_data,
+	.read_data		= parport_ip32_read_data,
+
+	.write_control		= parport_ip32_write_control,
+	.read_control		= parport_ip32_read_control,
+	.frob_control		= parport_ip32_frob_control,
+
+	.read_status		= parport_ip32_read_status,
+
+	.enable_irq		= parport_ip32_enable_irq,
+	.disable_irq		= parport_ip32_disable_irq,
+
+	.data_forward		= parport_ip32_data_forward,
+	.data_reverse		= parport_ip32_data_reverse,
+
+	.init_state		= parport_ip32_init_state,
+	.save_state		= parport_ip32_save_state,
+	.restore_state		= parport_ip32_restore_state,
+
+	.epp_write_data		= parport_ieee1284_epp_write_data,
+	.epp_read_data		= parport_ieee1284_epp_read_data,
+	.epp_write_addr		= parport_ieee1284_epp_write_addr,
+	.epp_read_addr		= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data		= parport_ieee1284_ecp_write_data,
+	.ecp_read_data		= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr		= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner			= THIS_MODULE,
+};
+
+/*--- Device detection -------------------------------------------------*/
+
+/**
+ * parport_ip32_ecp_supported - check for an ECP port
+ * @p:		pointer to the &parport structure
+ *
+ * Returns 1 if an ECP port is found, and 0 otherwise.  This function actually
+ * checks if an Extended Control Register seems to be present.  On successful
+ * return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_ecp_supported(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int ecr;
+
+	ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+	writeb(ecr, priv->regs.ecr);
+	if (readb(priv->regs.ecr) != (ecr | ECR_F_EMPTY))
+		goto fail;
+
+	pr_probe(p, "Found working ECR register\n");
+	parport_ip32_set_mode(p, ECR_MODE_SPP);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	return 1;
+
+fail:
+	pr_probe(p, "ECR register not found\n");
+	return 0;
+}
+
+/**
+ * parport_ip32_fifo_supported - check for FIFO parameters
+ * @p:		pointer to the &parport structure
+ *
+ * Check for FIFO parameters of an Extended Capabilities Port.  Returns 1 on
+ * success, and 0 otherwise.  Adjust FIFO parameters in the parport structure.
+ * On return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_fifo_supported(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	unsigned int configa, configb;
+	unsigned int pword;
+	unsigned int i;
+
+	/* Configuration mode */
+	parport_ip32_set_mode(p, ECR_MODE_CFG);
+	configa = readb(priv->regs.cnfgA);
+	configb = readb(priv->regs.cnfgB);
+
+	/* Find out PWord size */
+	switch (configa & CNFGA_ID_MASK) {
+	case CNFGA_ID_8:
+		pword = 1;
+		break;
+	case CNFGA_ID_16:
+		pword = 2;
+		break;
+	case CNFGA_ID_32:
+		pword = 4;
+		break;
+	default:
+		pr_probe(p, "Unknown implementation ID: 0x%0x\n",
+			 (configa & CNFGA_ID_MASK) >> CNFGA_ID_SHIFT);
+		goto fail;
+		break;
+	}
+	if (pword != 1) {
+		pr_probe(p, "Unsupported PWord size: %u\n", pword);
+		goto fail;
+	}
+	priv->pword = pword;
+	pr_probe(p, "PWord is %u bits\n", 8 * priv->pword);
+
+	/* Check for compression support */
+	writeb(configb | CNFGB_COMPRESS, priv->regs.cnfgB);
+	if (readb(priv->regs.cnfgB) & CNFGB_COMPRESS)
+		pr_probe(p, "Hardware compression detected (unsupported)\n");
+	writeb(configb & ~CNFGB_COMPRESS, priv->regs.cnfgB);
+
+	/* Reset FIFO and go in test mode (no interrupt, no DMA) */
+	parport_ip32_set_mode(p, ECR_MODE_TST);
+
+	/* FIFO must be empty now */
+	if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+		pr_probe(p, "FIFO not reset\n");
+		goto fail;
+	}
+
+	/* Find out FIFO depth. */
+	priv->fifo_depth = 0;
+	for (i = 0; i < 1024; i++) {
+		if (readb(priv->regs.ecr) & ECR_F_FULL) {
+			/* FIFO full */
+			priv->fifo_depth = i;
+			break;
+		}
+		writeb((u8)i, priv->regs.fifo);
+	}
+	if (i >= 1024) {
+		pr_probe(p, "Can't fill FIFO\n");
+		goto fail;
+	}
+	if (!priv->fifo_depth) {
+		pr_probe(p, "Can't get FIFO depth\n");
+		goto fail;
+	}
+	pr_probe(p, "FIFO is %u PWords deep\n", priv->fifo_depth);
+
+	/* Enable interrupts */
+	parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+	/* Find out writeIntrThreshold: number of PWords we know we can write
+	 * if we get an interrupt. */
+	priv->writeIntrThreshold = 0;
+	for (i = 0; i < priv->fifo_depth; i++) {
+		if (readb(priv->regs.fifo) != (u8)i) {
+			pr_probe(p, "Invalid data in FIFO\n");
+			goto fail;
+		}
+		if (!priv->writeIntrThreshold
+		    && readb(priv->regs.ecr) & ECR_SERVINTR)
+			/* writeIntrThreshold reached */
+			priv->writeIntrThreshold = i + 1;
+		if (i + 1 < priv->fifo_depth
+		    && readb(priv->regs.ecr) & ECR_F_EMPTY) {
+			/* FIFO empty before the last byte? */
+			pr_probe(p, "Data lost in FIFO\n");
+			goto fail;
+		}
+	}
+	if (!priv->writeIntrThreshold) {
+		pr_probe(p, "Can't get writeIntrThreshold\n");
+		goto fail;
+	}
+	pr_probe(p, "writeIntrThreshold is %u\n", priv->writeIntrThreshold);
+
+	/* FIFO must be empty now */
+	if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+		pr_probe(p, "Can't empty FIFO\n");
+		goto fail;
+	}
+
+	/* Reset FIFO */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	/* Set reverse direction (must be in PS2 mode) */
+	parport_ip32_data_reverse(p);
+	/* Test FIFO, no interrupt, no DMA */
+	parport_ip32_set_mode(p, ECR_MODE_TST);
+	/* Enable interrupts */
+	parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+	/* Find out readIntrThreshold: number of PWords we can read if we get
+	 * an interrupt. */
+	priv->readIntrThreshold = 0;
+	for (i = 0; i < priv->fifo_depth; i++) {
+		writeb(0xaa, priv->regs.fifo);
+		if (readb(priv->regs.ecr) & ECR_SERVINTR) {
+			/* readIntrThreshold reached */
+			priv->readIntrThreshold = i + 1;
+			break;
+		}
+	}
+	if (!priv->readIntrThreshold) {
+		pr_probe(p, "Can't get readIntrThreshold\n");
+		goto fail;
+	}
+	pr_probe(p, "readIntrThreshold is %u\n", priv->readIntrThreshold);
+
+	/* Reset ECR */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_data_forward(p);
+	parport_ip32_set_mode(p, ECR_MODE_SPP);
+	return 1;
+
+fail:
+	priv->fifo_depth = 0;
+	parport_ip32_set_mode(p, ECR_MODE_SPP);
+	return 0;
+}
+
+/*--- Initialization code ----------------------------------------------*/
+
+/**
+ * parport_ip32_make_isa_registers - compute (ISA) register addresses
+ * @regs:	pointer to &struct parport_ip32_regs to fill
+ * @base:	base address of standard and EPP registers
+ * @base_hi:	base address of ECP registers
+ * @regshift:	how much to shift register offset by
+ *
+ * Compute register addresses, according to the ISA standard.  The addresses
+ * of the standard and EPP registers are computed from address @base.  The
+ * addresses of the ECP registers are computed from address @base_hi.
+ */
+static void __init
+parport_ip32_make_isa_registers(struct parport_ip32_regs *regs,
+				void __iomem *base, void __iomem *base_hi,
+				unsigned int regshift)
+{
+#define r_base(offset)    ((u8 __iomem *)base    + ((offset) << regshift))
+#define r_base_hi(offset) ((u8 __iomem *)base_hi + ((offset) << regshift))
+	*regs = (struct parport_ip32_regs){
+		.data		= r_base(0),
+		.dsr		= r_base(1),
+		.dcr		= r_base(2),
+		.eppAddr	= r_base(3),
+		.eppData0	= r_base(4),
+		.eppData1	= r_base(5),
+		.eppData2	= r_base(6),
+		.eppData3	= r_base(7),
+		.ecpAFifo	= r_base(0),
+		.fifo		= r_base_hi(0),
+		.cnfgA		= r_base_hi(0),
+		.cnfgB		= r_base_hi(1),
+		.ecr		= r_base_hi(2)
+	};
+#undef r_base_hi
+#undef r_base
+}
+
+/**
+ * parport_ip32_probe_port - probe and register IP32 built-in parallel port
+ *
+ * Returns the new allocated &parport structure.  On error, an error code is
+ * encoded in return value with the ERR_PTR function.
+ */
+static __init struct parport *parport_ip32_probe_port(void)
+{
+	struct parport_ip32_regs regs;
+	struct parport_ip32_private *priv = NULL;
+	struct parport_operations *ops = NULL;
+	struct parport *p = NULL;
+	int err;
+
+	parport_ip32_make_isa_registers(&regs, &mace->isa.parallel,
+					&mace->isa.ecp1284, 8 /* regshift */);
+
+	ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+	priv = kmalloc(sizeof(struct parport_ip32_private), GFP_KERNEL);
+	p = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, ops);
+	if (ops == NULL || priv == NULL || p == NULL) {
+		err = -ENOMEM;
+		goto fail;
+	}
+	p->base = MACE_BASE + offsetof(struct sgi_mace, isa.parallel);
+	p->base_hi = MACE_BASE + offsetof(struct sgi_mace, isa.ecp1284);
+	p->private_data = priv;
+
+	*ops = parport_ip32_ops;
+	*priv = (struct parport_ip32_private){
+		.regs			= regs,
+		.dcr_writable		= DCR_DIR | DCR_SELECT | DCR_nINIT |
+					  DCR_AUTOFD | DCR_STROBE,
+		.irq_mode		= PARPORT_IP32_IRQ_FWD,
+	};
+	init_completion(&priv->irq_complete);
+
+	/* Probe port. */
+	if (!parport_ip32_ecp_supported(p)) {
+		err = -ENODEV;
+		goto fail;
+	}
+	parport_ip32_dump_state(p, "begin init", 0);
+
+	/* We found what looks like a working ECR register.  Simply assume
+	 * that all modes are correctly supported.  Enable basic modes. */
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->modes |= PARPORT_MODE_TRISTATE;
+
+	if (!parport_ip32_fifo_supported(p)) {
+		printk(KERN_WARNING PPIP32
+		       "%s: error: FIFO disabled\n", p->name);
+		/* Disable hardware modes depending on a working FIFO. */
+		features &= ~PARPORT_IP32_ENABLE_SPP;
+		features &= ~PARPORT_IP32_ENABLE_ECP;
+		/* DMA is not needed if FIFO is not supported.  */
+		features &= ~PARPORT_IP32_ENABLE_DMA;
+	}
+
+	/* Request IRQ */
+	if (features & PARPORT_IP32_ENABLE_IRQ) {
+		int irq = MACEISA_PARALLEL_IRQ;
+		if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
+			printk(KERN_WARNING PPIP32
+			       "%s: error: IRQ disabled\n", p->name);
+			/* DMA cannot work without interrupts. */
+			features &= ~PARPORT_IP32_ENABLE_DMA;
+		} else {
+			pr_probe(p, "Interrupt support enabled\n");
+			p->irq = irq;
+			priv->dcr_writable |= DCR_IRQ;
+		}
+	}
+
+	/* Allocate DMA resources */
+	if (features & PARPORT_IP32_ENABLE_DMA) {
+		if (parport_ip32_dma_register())
+			printk(KERN_WARNING PPIP32
+			       "%s: error: DMA disabled\n", p->name);
+		else {
+			pr_probe(p, "DMA support enabled\n");
+			p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
+			p->modes |= PARPORT_MODE_DMA;
+		}
+	}
+
+	if (features & PARPORT_IP32_ENABLE_SPP) {
+		/* Enable compatibility FIFO mode */
+		p->ops->compat_write_data = parport_ip32_compat_write_data;
+		p->modes |= PARPORT_MODE_COMPAT;
+		pr_probe(p, "Hardware support for SPP mode enabled\n");
+	}
+	if (features & PARPORT_IP32_ENABLE_EPP) {
+		/* Set up access functions to use EPP hardware. */
+		p->ops->epp_read_data = parport_ip32_epp_read_data;
+		p->ops->epp_write_data = parport_ip32_epp_write_data;
+		p->ops->epp_read_addr = parport_ip32_epp_read_addr;
+		p->ops->epp_write_addr = parport_ip32_epp_write_addr;
+		p->modes |= PARPORT_MODE_EPP;
+		pr_probe(p, "Hardware support for EPP mode enabled\n");
+	}
+	if (features & PARPORT_IP32_ENABLE_ECP) {
+		/* Enable ECP FIFO mode */
+		p->ops->ecp_write_data = parport_ip32_ecp_write_data;
+		/* FIXME - not implemented */
+/*		p->ops->ecp_read_data  = parport_ip32_ecp_read_data; */
+/*		p->ops->ecp_write_addr = parport_ip32_ecp_write_addr; */
+		p->modes |= PARPORT_MODE_ECP;
+		pr_probe(p, "Hardware support for ECP mode enabled\n");
+	}
+
+	/* Initialize the port with sensible values */
+	parport_ip32_set_mode(p, ECR_MODE_PS2);
+	parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+	parport_ip32_data_forward(p);
+	parport_ip32_disable_irq(p);
+	parport_ip32_write_data(p, 0x00);
+	parport_ip32_dump_state(p, "end init", 0);
+
+	/* Print out what we found */
+	printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
+	       p->name, p->base, p->base_hi);
+	if (p->irq != PARPORT_IRQ_NONE)
+		printk(", irq %d", p->irq);
+	printk(" [");
+#define printmode(x)	if (p->modes & PARPORT_MODE_##x)		\
+				printk("%s%s", f++ ? "," : "", #x)
+	{
+		unsigned int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT);
+		printmode(EPP);
+		printmode(ECP);
+		printmode(DMA);
+	}
+#undef printmode
+	printk("]\n");
+
+	parport_announce_port(p);
+	return p;
+
+fail:
+	if (p)
+		parport_put_port(p);
+	kfree(priv);
+	kfree(ops);
+	return ERR_PTR(err);
+}
+
+/**
+ * parport_ip32_unregister_port - unregister a parallel port
+ * @p:		pointer to the &struct parport
+ *
+ * Unregisters a parallel port and free previously allocated resources
+ * (memory, IRQ, ...).
+ */
+static __exit void parport_ip32_unregister_port(struct parport *p)
+{
+	struct parport_ip32_private * const priv = p->physport->private_data;
+	struct parport_operations *ops = p->ops;
+
+	parport_remove_port(p);
+	if (p->modes & PARPORT_MODE_DMA)
+		parport_ip32_dma_unregister();
+	if (p->irq != PARPORT_IRQ_NONE)
+		free_irq(p->irq, p);
+	parport_put_port(p);
+	kfree(priv);
+	kfree(ops);
+}
+
+/**
+ * parport_ip32_init - module initialization function
+ */
+static int __init parport_ip32_init(void)
+{
+	pr_info(PPIP32 "SGI IP32 built-in parallel port driver v0.6\n");
+	this_port = parport_ip32_probe_port();
+	return IS_ERR(this_port) ? PTR_ERR(this_port) : 0;
+}
+
+/**
+ * parport_ip32_exit - module termination function
+ */
+static void __exit parport_ip32_exit(void)
+{
+	parport_ip32_unregister_port(this_port);
+}
+
+/*--- Module stuff -----------------------------------------------------*/
+
+MODULE_AUTHOR("Arnaud Giersch <arnaud.giersch@free.fr>");
+MODULE_DESCRIPTION("SGI IP32 built-in parallel port driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.6");		/* update in parport_ip32_init() too */
+
+module_init(parport_ip32_init);
+module_exit(parport_ip32_exit);
+
+module_param(verbose_probing, bool, S_IRUGO);
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialization");
+
+module_param(features, uint, S_IRUGO);
+MODULE_PARM_DESC(features,
+		 "Bit mask of features to enable"
+		 ", bit 0: IRQ support"
+		 ", bit 1: DMA support"
+		 ", bit 2: hardware SPP mode"
+		 ", bit 3: hardware EPP mode"
+		 ", bit 4: hardware ECP mode");
+
+/*--- Inform (X)Emacs about preferred coding style ---------------------*/
+/*
+ * Local Variables:
+ * mode: c
+ * c-file-style: "linux"
+ * indent-tabs-mode: t
+ * tab-width: 8
+ * fill-column: 78
+ * ispell-local-dictionary: "american"
+ * End:
+ */
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
new file mode 100644
index 00000000..1c0c642b
--- /dev/null
+++ b/drivers/parport/parport_mfc3.c
@@ -0,0 +1,405 @@
+/* Low-level parallel port routines for the Multiface 3 card
+ *
+ * Author: Joerg Dorchain <joerg@dorchain.net>
+ *
+ * (C) The elitist m68k Users(TM)
+ *
+ * based on the existing parport_amiga and lp_mfc
+ *
+ *
+ * From the MFC3 documentation:
+ * 
+ * Miscellaneous PIA Details
+ * -------------------------
+ * 
+ * 	The two open-drain interrupt outputs /IRQA and /IRQB are routed to
+ * /INT2 of the Z2 bus.
+ * 
+ * 	The CPU data bus of the PIA (D0-D7) is connected to D8-D15 on the Z2
+ * bus. This means that any PIA registers are accessed at even addresses.
+ * 
+ * Centronics Pin Connections for the PIA
+ * --------------------------------------
+ * 
+ * 	The following table shows the connections between the PIA and the
+ * Centronics interface connector. These connections implement a single, but
+ * very complete, Centronics type interface. The Pin column gives the pin
+ * numbers of the PIA. The Centronics pin numbers can be found in the section
+ * "Parallel Connectors".
+ * 
+ * 
+ *    Pin | PIA | Dir | Centronics Names
+ * -------+-----+-----+---------------------------------------------------------
+ *     19 | CB2 | --> | /STROBE (aka /DRDY)
+ *  10-17 | PBx | <-> | DATA0 - DATA7
+ *     18 | CB1 | <-- | /ACK
+ *     40 | CA1 | <-- | BUSY
+ *      3 | PA1 | <-- | PAPER-OUT (aka POUT)
+ *      4 | PA2 | <-- | SELECTED (aka SEL)
+ *      9 | PA7 | --> | /INIT (aka /RESET or /INPUT-PRIME)
+ *      6 | PA4 | <-- | /ERROR (aka /FAULT)
+ *      7 | PA5 | --> | DIR (aka /SELECT-IN)
+ *      8 | PA6 | --> | /AUTO-FEED-XT
+ *     39 | CA2 | --> | open
+ *      5 | PA3 | <-- | /ACK (same as CB1!)
+ *      2 | PA0 | <-- | BUSY (same as CA1!)
+ * -------+-----+-----+---------------------------------------------------------
+ * 
+ * Should be enough to understand some of the driver.
+ *
+ * Per convention for normal use the port registers are visible.
+ * If you need the data direction registers, restore the value in the
+ * control register.
+ */
+
+#include "multiface.h"
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/mc6821.h>
+#include <linux/zorro.h>
+#include <linux/interrupt.h>
+#include <asm/setup.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+#include <asm/amigaints.h>
+
+/* Maximum Number of Cards supported */
+#define MAX_MFC 5
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+static inline int DPRINTK(void *nothing, ...) {return 0;}
+#endif
+
+static struct parport *this_port[MAX_MFC] = {NULL, };
+static volatile int dummy; /* for trigger readds */
+
+#define pia(dev) ((struct pia *)(dev->base))
+static struct parport_operations pp_mfc3_ops;
+
+static void mfc3_write_data(struct parport *p, unsigned char data)
+{
+DPRINTK(KERN_DEBUG "write_data %c\n",data);
+
+	dummy = pia(p)->pprb; /* clears irq bit */
+	/* Triggers also /STROBE.*/
+	pia(p)->pprb = data;
+}
+
+static unsigned char mfc3_read_data(struct parport *p)
+{
+	/* clears interrupt bit. Triggers also /STROBE. */
+	return pia(p)->pprb;
+}
+
+static unsigned char control_pc_to_mfc3(unsigned char control)
+{
+	unsigned char ret = 32|64;
+
+	if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
+		ret &= ~32; /* /SELECT_IN */
+	if (control & PARPORT_CONTROL_INIT) /* INITP */
+		ret |= 128;
+	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
+		ret &= ~64;
+	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
+		/* Handled directly by hardware */;
+	return ret;
+}
+
+static unsigned char control_mfc3_to_pc(unsigned char control)
+{
+	unsigned char ret = PARPORT_CONTROL_STROBE 
+			  | PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_SELECT;
+
+	if (control & 128) /* /INITP */
+		ret |= PARPORT_CONTROL_INIT;
+	if (control & 64) /* /AUTOLF */
+		ret &= ~PARPORT_CONTROL_AUTOFD;
+	if (control & 32) /* /SELECT_IN */
+		ret &= ~PARPORT_CONTROL_SELECT;
+	return ret;
+}
+
+static void mfc3_write_control(struct parport *p, unsigned char control)
+{
+DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	pia(p)->ppra = (pia(p)->ppra & 0x1f) | control_pc_to_mfc3(control);
+}
+	
+static unsigned char mfc3_read_control( struct parport *p)
+{
+DPRINTK(KERN_DEBUG "read_control \n");
+	return control_mfc3_to_pc(pia(p)->ppra & 0xe0);
+}
+
+static unsigned char mfc3_frob_control( struct parport *p, unsigned char mask, unsigned char val)
+{
+	unsigned char old;
+
+DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	old = mfc3_read_control(p);
+	mfc3_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+#if 0 /* currently unused */
+static unsigned char status_pc_to_mfc3(unsigned char status)
+{
+	unsigned char ret = 1;
+
+	if (status & PARPORT_STATUS_BUSY) /* Busy */
+		ret &= ~1;
+	if (status & PARPORT_STATUS_ACK) /* Ack */
+		ret |= 8;
+	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
+		ret |= 2;
+	if (status & PARPORT_STATUS_SELECT) /* select */
+		ret |= 4;
+	if (status & PARPORT_STATUS_ERROR) /* error */
+		ret |= 16;
+	return ret;
+}
+#endif
+
+static unsigned char status_mfc3_to_pc(unsigned char status)
+{
+	unsigned char ret = PARPORT_STATUS_BUSY;
+
+	if (status & 1) /* Busy */
+		ret &= ~PARPORT_STATUS_BUSY;
+	if (status & 2) /* PaperOut */
+		ret |= PARPORT_STATUS_PAPEROUT;
+	if (status & 4) /* Selected */
+		ret |= PARPORT_STATUS_SELECT;
+	if (status & 8) /* Ack */
+		ret |= PARPORT_STATUS_ACK;
+	if (status & 16) /* /ERROR */
+		ret |= PARPORT_STATUS_ERROR;
+
+	return ret;
+}
+
+#if 0 /* currently unused */
+static void mfc3_write_status( struct parport *p, unsigned char status)
+{
+DPRINTK(KERN_DEBUG "write_status %02x\n",status);
+	pia(p)->ppra = (pia(p)->ppra & 0xe0) | status_pc_to_mfc3(status);
+}
+#endif
+
+static unsigned char mfc3_read_status(struct parport *p)
+{
+	unsigned char status;
+
+	status = status_mfc3_to_pc(pia(p)->ppra & 0x1f);
+DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	return status;
+}
+
+#if 0 /* currently unused */
+static void mfc3_change_mode( struct parport *p, int m)
+{
+	/* XXX: This port only has one mode, and I am
+	not sure about the corresponding PC-style mode*/
+}
+#endif
+
+static int use_cnt = 0;
+
+static irqreturn_t mfc3_interrupt(int irq, void *dev_id)
+{
+	int i;
+
+	for( i = 0; i < MAX_MFC; i++)
+		if (this_port[i] != NULL)
+			if (pia(this_port[i])->crb & 128) { /* Board caused interrupt */
+				dummy = pia(this_port[i])->pprb; /* clear irq bit */
+				parport_generic_irq(this_port[i]);
+			}
+	return IRQ_HANDLED;
+}
+
+static void mfc3_enable_irq(struct parport *p)
+{
+	pia(p)->crb |= PIA_C1_ENABLE_IRQ;
+}
+
+static void mfc3_disable_irq(struct parport *p)
+{
+	pia(p)->crb &= ~PIA_C1_ENABLE_IRQ;
+}
+
+static void mfc3_data_forward(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "forward\n");
+	pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */
+	pia(p)->pddrb = 255; /* all pins output */
+	pia(p)->crb |= PIA_DDR; /* make data register visible - default */
+}
+
+static void mfc3_data_reverse(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "reverse\n");
+	pia(p)->crb &= ~PIA_DDR; /* make data direction register visible */
+	pia(p)->pddrb = 0; /* all pins input */
+	pia(p)->crb |= PIA_DDR; /* make data register visible - default */
+}
+
+static void mfc3_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.amiga.data = 0;
+	s->u.amiga.datadir = 255;
+	s->u.amiga.status = 0;
+	s->u.amiga.statusdir = 0xe0;
+}
+
+static void mfc3_save_state(struct parport *p, struct parport_state *s)
+{
+	s->u.amiga.data = pia(p)->pprb;
+	pia(p)->crb &= ~PIA_DDR;
+	s->u.amiga.datadir = pia(p)->pddrb;
+	pia(p)->crb |= PIA_DDR;
+	s->u.amiga.status = pia(p)->ppra;
+	pia(p)->cra &= ~PIA_DDR;
+	s->u.amiga.statusdir = pia(p)->pddrb;
+	pia(p)->cra |= PIA_DDR;
+}
+
+static void mfc3_restore_state(struct parport *p, struct parport_state *s)
+{
+	pia(p)->pprb = s->u.amiga.data;
+	pia(p)->crb &= ~PIA_DDR;
+	pia(p)->pddrb = s->u.amiga.datadir;
+	pia(p)->crb |= PIA_DDR;
+	pia(p)->ppra = s->u.amiga.status;
+	pia(p)->cra &= ~PIA_DDR;
+	pia(p)->pddrb = s->u.amiga.statusdir;
+	pia(p)->cra |= PIA_DDR;
+}
+
+static struct parport_operations pp_mfc3_ops = {
+	.write_data	= mfc3_write_data,
+	.read_data	= mfc3_read_data,
+
+	.write_control	= mfc3_write_control,
+	.read_control	= mfc3_read_control,
+	.frob_control	= mfc3_frob_control,
+
+	.read_status	= mfc3_read_status,
+
+	.enable_irq	= mfc3_enable_irq,
+	.disable_irq	= mfc3_disable_irq,
+
+	.data_forward	= mfc3_data_forward, 
+	.data_reverse	= mfc3_data_reverse, 
+
+	.init_state	= mfc3_init_state,
+	.save_state	= mfc3_save_state,
+	.restore_state	= mfc3_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* ----------- Initialisation code --------------------------------- */
+
+static int __init parport_mfc3_init(void)
+{
+	struct parport *p;
+	int pias = 0;
+	struct pia *pp;
+	struct zorro_dev *z = NULL;
+
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
+	while ((z = zorro_find_device(ZORRO_PROD_BSC_MULTIFACE_III, z))) {
+		unsigned long piabase = z->resource.start+PIABASE;
+		if (!request_mem_region(piabase, sizeof(struct pia), "PIA"))
+			continue;
+
+		pp = (struct pia *)ZTWO_VADDR(piabase);
+		pp->crb = 0;
+		pp->pddrb = 255; /* all data pins output */
+		pp->crb = PIA_DDR|32|8;
+		dummy = pp->pddrb; /* reading clears interrupt */
+		pp->cra = 0;
+		pp->pddra = 0xe0; /* /RESET,  /DIR ,/AUTO-FEED output */
+		pp->cra = PIA_DDR;
+		pp->ppra = 0; /* reset printer */
+		udelay(10);
+		pp->ppra = 128;
+		p = parport_register_port((unsigned long)pp, IRQ_AMIGA_PORTS,
+					  PARPORT_DMA_NONE, &pp_mfc3_ops);
+		if (!p)
+			goto out_port;
+
+		if (p->irq != PARPORT_IRQ_NONE) {
+			if (use_cnt++ == 0)
+				if (request_irq(IRQ_AMIGA_PORTS, mfc3_interrupt, IRQF_SHARED, p->name, &pp_mfc3_ops))
+					goto out_irq;
+		}
+		p->dev = &z->dev;
+
+		this_port[pias++] = p;
+		printk(KERN_INFO "%s: Multiface III port using irq\n", p->name);
+		/* XXX: set operating mode */
+
+		p->private_data = (void *)piabase;
+		parport_announce_port (p);
+
+		if (pias >= MAX_MFC)
+			break;
+		continue;
+
+	out_irq:
+		parport_put_port(p);
+	out_port:
+		release_mem_region(piabase, sizeof(struct pia));
+	}
+
+	return pias ? 0 : -ENODEV;
+}
+
+static void __exit parport_mfc3_exit(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_MFC; i++) {
+		if (!this_port[i])
+			continue;
+		parport_remove_port(this_port[i]);
+		if (this_port[i]->irq != PARPORT_IRQ_NONE) {
+			if (--use_cnt == 0) 
+				free_irq(IRQ_AMIGA_PORTS, &pp_mfc3_ops);
+		}
+		release_mem_region(ZTWO_PADDR(this_port[i]->private_data), sizeof(struct pia));
+		parport_put_port(this_port[i]);
+	}
+}
+
+
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Parport Driver for Multiface 3 expansion cards Parallel Port");
+MODULE_SUPPORTED_DEVICE("Multiface 3 Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_mfc3_init)
+module_exit(parport_mfc3_exit)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
new file mode 100644
index 00000000..0cb64f50
--- /dev/null
+++ b/drivers/parport/parport_pc.c
@@ -0,0 +1,3614 @@
+/* Low-level parallel-port routines for 8255-based PC-style hardware.
+ *
+ * Authors: Phil Blundell <philb@gnu.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell
+ *          Andrea Arcangeli
+ *
+ * based on work by Grant Guenther <grant@torque.net> and Phil Blundell.
+ *
+ * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
+ * DMA support - Bert De Jonghe <bert@sophis.be>
+ * Many ECP bugs fixed.  Fred Barnes & Jamie Lokier, 1999
+ * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
+ * Various hacks, Fred Barnes, 04/2001
+ * Updated probing logic - Adam Belay <ambx1@neo.rr.com>
+ */
+
+/* This driver should work with any hardware that is broadly compatible
+ * with that in the IBM PC.  This applies to the majority of integrated
+ * I/O chipsets that are commonly available.  The expected register
+ * layout is:
+ *
+ *	base+0		data
+ *	base+1		status
+ *	base+2		control
+ *
+ * In addition, there are some optional registers:
+ *
+ *	base+3		EPP address
+ *	base+4		EPP data
+ *	base+0x400	ECP config A
+ *	base+0x401	ECP config B
+ *	base+0x402	ECP control
+ *
+ * All registers are 8 bits wide and read/write.  If your hardware differs
+ * only in register addresses (eg because your registers are on 32-bit
+ * word boundaries) then you can alter the constants in parport_pc.h to
+ * accommodate this.
+ *
+ * Note that the ECP registers may not start at offset 0x400 for PCI cards,
+ * but rather will start at port->base_hi.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/pnp.h>
+#include <linux/platform_device.h>
+#include <linux/sysctl.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/dma.h>
+
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+#include <linux/via.h>
+#include <asm/parport.h>
+
+#define PARPORT_PC_MAX_PORTS PARPORT_MAX
+
+#ifdef CONFIG_ISA_DMA_API
+#define HAS_DMA
+#endif
+
+/* ECR modes */
+#define ECR_SPP 00
+#define ECR_PS2 01
+#define ECR_PPF 02
+#define ECR_ECP 03
+#define ECR_EPP 04
+#define ECR_VND 05
+#define ECR_TST 06
+#define ECR_CNF 07
+#define ECR_MODE_MASK 0xe0
+#define ECR_WRITE(p, v) frob_econtrol((p), 0xff, (v))
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DPRINTK  printk
+#else
+#define DPRINTK(stuff...)
+#endif
+
+
+#define NR_SUPERIOS 3
+static struct superio_struct {	/* For Super-IO chips autodetection */
+	int io;
+	int irq;
+	int dma;
+} superios[NR_SUPERIOS] = { {0,},};
+
+static int user_specified;
+#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
+       (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
+static int verbose_probing;
+#endif
+static int pci_registered_parport;
+static int pnp_registered_parport;
+
+/* frob_control, but for ECR */
+static void frob_econtrol(struct parport *pb, unsigned char m,
+			   unsigned char v)
+{
+	unsigned char ectr = 0;
+
+	if (m != 0xff)
+		ectr = inb(ECONTROL(pb));
+
+	DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
+		m, v, ectr, (ectr & ~m) ^ v);
+
+	outb((ectr & ~m) ^ v, ECONTROL(pb));
+}
+
+static inline void frob_set_mode(struct parport *p, int mode)
+{
+	frob_econtrol(p, ECR_MODE_MASK, mode << 5);
+}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+/* Safely change the mode bits in the ECR
+   Returns:
+	    0    : Success
+	   -EBUSY: Could not drain FIFO in some finite amount of time,
+		   mode not changed!
+ */
+static int change_mode(struct parport *p, int m)
+{
+	const struct parport_pc_private *priv = p->physport->private_data;
+	unsigned char oecr;
+	int mode;
+
+	DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
+
+	if (!priv->ecr) {
+		printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
+		return 0;
+	}
+
+	/* Bits <7:5> contain the mode. */
+	oecr = inb(ECONTROL(p));
+	mode = (oecr >> 5) & 0x7;
+	if (mode == m)
+		return 0;
+
+	if (mode >= 2 && !(priv->ctr & 0x20)) {
+		/* This mode resets the FIFO, so we may
+		 * have to wait for it to drain first. */
+		unsigned long expire = jiffies + p->physport->cad->timeout;
+		int counter;
+		switch (mode) {
+		case ECR_PPF: /* Parallel Port FIFO mode */
+		case ECR_ECP: /* ECP Parallel Port mode */
+			/* Busy wait for 200us */
+			for (counter = 0; counter < 40; counter++) {
+				if (inb(ECONTROL(p)) & 0x01)
+					break;
+				if (signal_pending(current))
+					break;
+				udelay(5);
+			}
+
+			/* Poll slowly. */
+			while (!(inb(ECONTROL(p)) & 0x01)) {
+				if (time_after_eq(jiffies, expire))
+					/* The FIFO is stuck. */
+					return -EBUSY;
+				schedule_timeout_interruptible(
+							msecs_to_jiffies(10));
+				if (signal_pending(current))
+					break;
+			}
+		}
+	}
+
+	if (mode >= 2 && m >= 2) {
+		/* We have to go through mode 001 */
+		oecr &= ~(7 << 5);
+		oecr |= ECR_PS2 << 5;
+		ECR_WRITE(p, oecr);
+	}
+
+	/* Set the mode. */
+	oecr &= ~(7 << 5);
+	oecr |= m << 5;
+	ECR_WRITE(p, oecr);
+	return 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Find FIFO lossage; FIFO is reset */
+#if 0
+static int get_fifo_residue(struct parport *p)
+{
+	int residue;
+	int cnfga;
+	const struct parport_pc_private *priv = p->physport->private_data;
+
+	/* Adjust for the contents of the FIFO. */
+	for (residue = priv->fifo_depth; ; residue--) {
+		if (inb(ECONTROL(p)) & 0x2)
+				/* Full up. */
+			break;
+
+		outb(0, FIFO(p));
+	}
+
+	printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
+		residue);
+
+	/* Reset the FIFO. */
+	frob_set_mode(p, ECR_PS2);
+
+	/* Now change to config mode and clean up. FIXME */
+	frob_set_mode(p, ECR_CNF);
+	cnfga = inb(CONFIGA(p));
+	printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
+
+	if (!(cnfga & (1<<2))) {
+		printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
+		residue++;
+	}
+
+	/* Don't care about partial PWords until support is added for
+	 * PWord != 1 byte. */
+
+	/* Back to PS2 mode. */
+	frob_set_mode(p, ECR_PS2);
+
+	DPRINTK(KERN_DEBUG
+	     "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
+							inb(ECONTROL(p)));
+	return residue;
+}
+#endif  /*  0 */
+#endif /* IEEE 1284 support */
+#endif /* FIFO support */
+
+/*
+ * Clear TIMEOUT BIT in EPP MODE
+ *
+ * This is also used in SPP detection.
+ */
+static int clear_epp_timeout(struct parport *pb)
+{
+	unsigned char r;
+
+	if (!(parport_pc_read_status(pb) & 0x01))
+		return 1;
+
+	/* To clear timeout some chips require double read */
+	parport_pc_read_status(pb);
+	r = parport_pc_read_status(pb);
+	outb(r | 0x01, STATUS(pb)); /* Some reset by writing 1 */
+	outb(r & 0xfe, STATUS(pb)); /* Others by writing 0 */
+	r = parport_pc_read_status(pb);
+
+	return !(r & 0x01);
+}
+
+/*
+ * Access functions.
+ *
+ * Most of these aren't static because they may be used by the
+ * parport_xxx_yyy macros.  extern __inline__ versions of several
+ * of these are in parport_pc.h.
+ */
+
+static void parport_pc_init_state(struct pardevice *dev,
+						struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc;
+	if (dev->irq_func &&
+	    dev->port->irq != PARPORT_IRQ_NONE)
+		/* Set ackIntEn */
+		s->u.pc.ctr |= 0x10;
+
+	s->u.pc.ecr = 0x34; /* NetMos chip can cause problems 0x24;
+			     * D.Gruszka VScom */
+}
+
+static void parport_pc_save_state(struct parport *p, struct parport_state *s)
+{
+	const struct parport_pc_private *priv = p->physport->private_data;
+	s->u.pc.ctr = priv->ctr;
+	if (priv->ecr)
+		s->u.pc.ecr = inb(ECONTROL(p));
+}
+
+static void parport_pc_restore_state(struct parport *p,
+						struct parport_state *s)
+{
+	struct parport_pc_private *priv = p->physport->private_data;
+	register unsigned char c = s->u.pc.ctr & priv->ctr_writable;
+	outb(c, CONTROL(p));
+	priv->ctr = c;
+	if (priv->ecr)
+		ECR_WRITE(p, s->u.pc.ecr);
+}
+
+#ifdef CONFIG_PARPORT_1284
+static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
+				       size_t length, int flags)
+{
+	size_t got = 0;
+
+	if (flags & PARPORT_W91284PIC) {
+		unsigned char status;
+		size_t left = length;
+
+		/* use knowledge about data lines..:
+		 *  nFault is 0 if there is at least 1 byte in the Warp's FIFO
+		 *  pError is 1 if there are 16 bytes in the Warp's FIFO
+		 */
+		status = inb(STATUS(port));
+
+		while (!(status & 0x08) && got < length) {
+			if (left >= 16 && (status & 0x20) && !(status & 0x08)) {
+				/* can grab 16 bytes from warp fifo */
+				if (!((long)buf & 0x03))
+					insl(EPPDATA(port), buf, 4);
+				else
+					insb(EPPDATA(port), buf, 16);
+				buf += 16;
+				got += 16;
+				left -= 16;
+			} else {
+				/* grab single byte from the warp fifo */
+				*((char *)buf) = inb(EPPDATA(port));
+				buf++;
+				got++;
+				left--;
+			}
+			status = inb(STATUS(port));
+			if (status & 0x01) {
+				/* EPP timeout should never occur... */
+				printk(KERN_DEBUG
+"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+				clear_epp_timeout(port);
+			}
+		}
+		return got;
+	}
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		if (!(((long)buf | length) & 0x03))
+			insl(EPPDATA(port), buf, (length >> 2));
+		else
+			insb(EPPDATA(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; got < length; got++) {
+		*((char *)buf) = inb(EPPDATA(port));
+		buf++;
+		if (inb(STATUS(port)) & 0x01) {
+			/* EPP timeout */
+			clear_epp_timeout(port);
+			break;
+		}
+	}
+
+	return got;
+}
+
+static size_t parport_pc_epp_write_data(struct parport *port, const void *buf,
+					size_t length, int flags)
+{
+	size_t written = 0;
+
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		if (!(((long)buf | length) & 0x03))
+			outsl(EPPDATA(port), buf, (length >> 2));
+		else
+			outsb(EPPDATA(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; written < length; written++) {
+		outb(*((char *)buf), EPPDATA(port));
+		buf++;
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			break;
+		}
+	}
+
+	return written;
+}
+
+static size_t parport_pc_epp_read_addr(struct parport *port, void *buf,
+					size_t length, int flags)
+{
+	size_t got = 0;
+
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		insb(EPPADDR(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; got < length; got++) {
+		*((char *)buf) = inb(EPPADDR(port));
+		buf++;
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			break;
+		}
+	}
+
+	return got;
+}
+
+static size_t parport_pc_epp_write_addr(struct parport *port,
+					 const void *buf, size_t length,
+					 int flags)
+{
+	size_t written = 0;
+
+	if ((flags & PARPORT_EPP_FAST) && (length > 1)) {
+		outsb(EPPADDR(port), buf, length);
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			return -EIO;
+		}
+		return length;
+	}
+	for (; written < length; written++) {
+		outb(*((char *)buf), EPPADDR(port));
+		buf++;
+		if (inb(STATUS(port)) & 0x01) {
+			clear_epp_timeout(port);
+			break;
+		}
+	}
+
+	return written;
+}
+
+static size_t parport_pc_ecpepp_read_data(struct parport *port, void *buf,
+					  size_t length, int flags)
+{
+	size_t got;
+
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_data_reverse(port);
+	parport_pc_write_control(port, 0x4);
+	got = parport_pc_epp_read_data(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
+
+	return got;
+}
+
+static size_t parport_pc_ecpepp_write_data(struct parport *port,
+					   const void *buf, size_t length,
+					   int flags)
+{
+	size_t written;
+
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_write_control(port, 0x4);
+	parport_pc_data_forward(port);
+	written = parport_pc_epp_write_data(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
+
+	return written;
+}
+
+static size_t parport_pc_ecpepp_read_addr(struct parport *port, void *buf,
+					  size_t length, int flags)
+{
+	size_t got;
+
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_data_reverse(port);
+	parport_pc_write_control(port, 0x4);
+	got = parport_pc_epp_read_addr(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
+
+	return got;
+}
+
+static size_t parport_pc_ecpepp_write_addr(struct parport *port,
+					    const void *buf, size_t length,
+					    int flags)
+{
+	size_t written;
+
+	frob_set_mode(port, ECR_EPP);
+	parport_pc_write_control(port, 0x4);
+	parport_pc_data_forward(port);
+	written = parport_pc_epp_write_addr(port, buf, length, flags);
+	frob_set_mode(port, ECR_PS2);
+
+	return written;
+}
+#endif /* IEEE 1284 support */
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+static size_t parport_pc_fifo_write_block_pio(struct parport *port,
+					       const void *buf, size_t length)
+{
+	int ret = 0;
+	const unsigned char *bufp = buf;
+	size_t left = length;
+	unsigned long expire = jiffies + port->physport->cad->timeout;
+	const int fifo = FIFO(port);
+	int poll_for = 8; /* 80 usecs */
+	const struct parport_pc_private *priv = port->physport->private_data;
+	const int fifo_depth = priv->fifo_depth;
+
+	port = port->physport;
+
+	/* We don't want to be interrupted every character. */
+	parport_pc_disable_irq(port);
+	/* set nErrIntrEn and serviceIntr */
+	frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+
+	/* Forward mode. */
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
+
+	while (left) {
+		unsigned char byte;
+		unsigned char ecrval = inb(ECONTROL(port));
+		int i = 0;
+
+		if (need_resched() && time_before(jiffies, expire))
+			/* Can't yield the port. */
+			schedule();
+
+		/* Anyone else waiting for the port? */
+		if (port->waithead) {
+			printk(KERN_DEBUG "Somebody wants the port\n");
+			break;
+		}
+
+		if (ecrval & 0x02) {
+			/* FIFO is full. Wait for interrupt. */
+
+			/* Clear serviceIntr */
+			ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+			ret = parport_wait_event(port, HZ);
+			if (ret < 0)
+				break;
+			ret = 0;
+			if (!time_before(jiffies, expire)) {
+				/* Timed out. */
+				printk(KERN_DEBUG "FIFO write timed out\n");
+				break;
+			}
+			ecrval = inb(ECONTROL(port));
+			if (!(ecrval & (1<<2))) {
+				if (need_resched() &&
+				    time_before(jiffies, expire))
+					schedule();
+
+				goto false_alarm;
+			}
+
+			continue;
+		}
+
+		/* Can't fail now. */
+		expire = jiffies + port->cad->timeout;
+
+poll:
+		if (signal_pending(current))
+			break;
+
+		if (ecrval & 0x01) {
+			/* FIFO is empty. Blast it full. */
+			const int n = left < fifo_depth ? left : fifo_depth;
+			outsb(fifo, bufp, n);
+			bufp += n;
+			left -= n;
+
+			/* Adjust the poll time. */
+			if (i < (poll_for - 2))
+				poll_for--;
+			continue;
+		} else if (i++ < poll_for) {
+			udelay(10);
+			ecrval = inb(ECONTROL(port));
+			goto poll;
+		}
+
+		/* Half-full(call me an optimist) */
+		byte = *bufp++;
+		outb(byte, fifo);
+		left--;
+	}
+	dump_parport_state("leave fifo_write_block_pio", port);
+	return length - left;
+}
+
+#ifdef HAS_DMA
+static size_t parport_pc_fifo_write_block_dma(struct parport *port,
+					       const void *buf, size_t length)
+{
+	int ret = 0;
+	unsigned long dmaflag;
+	size_t left = length;
+	const struct parport_pc_private *priv = port->physport->private_data;
+	struct device *dev = port->physport->dev;
+	dma_addr_t dma_addr, dma_handle;
+	size_t maxlen = 0x10000; /* max 64k per DMA transfer */
+	unsigned long start = (unsigned long) buf;
+	unsigned long end = (unsigned long) buf + length - 1;
+
+	dump_parport_state("enter fifo_write_block_dma", port);
+	if (end < MAX_DMA_ADDRESS) {
+		/* If it would cross a 64k boundary, cap it at the end. */
+		if ((start ^ end) & ~0xffffUL)
+			maxlen = 0x10000 - (start & 0xffff);
+
+		dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length,
+						       DMA_TO_DEVICE);
+	} else {
+		/* above 16 MB we use a bounce buffer as ISA-DMA
+		   is not possible */
+		maxlen   = PAGE_SIZE;          /* sizeof(priv->dma_buf) */
+		dma_addr = priv->dma_handle;
+		dma_handle = 0;
+	}
+
+	port = port->physport;
+
+	/* We don't want to be interrupted every character. */
+	parport_pc_disable_irq(port);
+	/* set nErrIntrEn and serviceIntr */
+	frob_econtrol(port, (1<<4) | (1<<2), (1<<4) | (1<<2));
+
+	/* Forward mode. */
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
+
+	while (left) {
+		unsigned long expire = jiffies + port->physport->cad->timeout;
+
+		size_t count = left;
+
+		if (count > maxlen)
+			count = maxlen;
+
+		if (!dma_handle)   /* bounce buffer ! */
+			memcpy(priv->dma_buf, buf, count);
+
+		dmaflag = claim_dma_lock();
+		disable_dma(port->dma);
+		clear_dma_ff(port->dma);
+		set_dma_mode(port->dma, DMA_MODE_WRITE);
+		set_dma_addr(port->dma, dma_addr);
+		set_dma_count(port->dma, count);
+
+		/* Set DMA mode */
+		frob_econtrol(port, 1<<3, 1<<3);
+
+		/* Clear serviceIntr */
+		frob_econtrol(port, 1<<2, 0);
+
+		enable_dma(port->dma);
+		release_dma_lock(dmaflag);
+
+		/* assume DMA will be successful */
+		left -= count;
+		buf  += count;
+		if (dma_handle)
+			dma_addr += count;
+
+		/* Wait for interrupt. */
+false_alarm:
+		ret = parport_wait_event(port, HZ);
+		if (ret < 0)
+			break;
+		ret = 0;
+		if (!time_before(jiffies, expire)) {
+			/* Timed out. */
+			printk(KERN_DEBUG "DMA write timed out\n");
+			break;
+		}
+		/* Is serviceIntr set? */
+		if (!(inb(ECONTROL(port)) & (1<<2))) {
+			cond_resched();
+
+			goto false_alarm;
+		}
+
+		dmaflag = claim_dma_lock();
+		disable_dma(port->dma);
+		clear_dma_ff(port->dma);
+		count = get_dma_residue(port->dma);
+		release_dma_lock(dmaflag);
+
+		cond_resched(); /* Can't yield the port. */
+
+		/* Anyone else waiting for the port? */
+		if (port->waithead) {
+			printk(KERN_DEBUG "Somebody wants the port\n");
+			break;
+		}
+
+		/* update for possible DMA residue ! */
+		buf  -= count;
+		left += count;
+		if (dma_handle)
+			dma_addr -= count;
+	}
+
+	/* Maybe got here through break, so adjust for DMA residue! */
+	dmaflag = claim_dma_lock();
+	disable_dma(port->dma);
+	clear_dma_ff(port->dma);
+	left += get_dma_residue(port->dma);
+	release_dma_lock(dmaflag);
+
+	/* Turn off DMA mode */
+	frob_econtrol(port, 1<<3, 0);
+
+	if (dma_handle)
+		dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
+
+	dump_parport_state("leave fifo_write_block_dma", port);
+	return length - left;
+}
+#endif
+
+static inline size_t parport_pc_fifo_write_block(struct parport *port,
+					       const void *buf, size_t length)
+{
+#ifdef HAS_DMA
+	if (port->dma != PARPORT_DMA_NONE)
+		return parport_pc_fifo_write_block_dma(port, buf, length);
+#endif
+	return parport_pc_fifo_write_block_pio(port, buf, length);
+}
+
+/* Parallel Port FIFO mode (ECP chipsets) */
+static size_t parport_pc_compat_write_block_pio(struct parport *port,
+						 const void *buf, size_t length,
+						 int flags)
+{
+	size_t written;
+	int r;
+	unsigned long expire;
+	const struct parport_pc_private *priv = port->physport->private_data;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_write_compat(port, buf,
+						      length, flags);
+
+	/* Set up parallel port FIFO mode.*/
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
+	parport_pc_frob_control(port, PARPORT_CONTROL_STROBE, 0);
+	r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
+	if (r)
+		printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
+								port->name);
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Write the data to the FIFO. */
+	written = parport_pc_fifo_write_block(port, buf, length);
+
+	/* Finish up. */
+	/* For some hardware we don't want to touch the mode until
+	 * the FIFO is empty, so allow 4 seconds for each position
+	 * in the fifo.
+	 */
+	expire = jiffies + (priv->fifo_depth * HZ * 4);
+	do {
+		/* Wait for the FIFO to empty */
+		r = change_mode(port, ECR_PS2);
+		if (r != -EBUSY)
+			break;
+	} while (time_before(jiffies, expire));
+	if (r == -EBUSY) {
+
+		printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+
+		/* Prevent further data transfer. */
+		frob_set_mode(port, ECR_TST);
+
+		/* Adjust for the contents of the FIFO. */
+		for (written -= priv->fifo_depth; ; written++) {
+			if (inb(ECONTROL(port)) & 0x2) {
+				/* Full up. */
+				break;
+			}
+			outb(0, FIFO(port));
+		}
+
+		/* Reset the FIFO and return to PS2 mode. */
+		frob_set_mode(port, ECR_PS2);
+	}
+
+	r = parport_wait_peripheral(port,
+				     PARPORT_STATUS_BUSY,
+				     PARPORT_STATUS_BUSY);
+	if (r)
+		printk(KERN_DEBUG
+			"%s: BUSY timeout (%d) in compat_write_block_pio\n",
+			port->name, r);
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+/* ECP */
+#ifdef CONFIG_PARPORT_1284
+static size_t parport_pc_ecp_write_block_pio(struct parport *port,
+					      const void *buf, size_t length,
+					      int flags)
+{
+	size_t written;
+	int r;
+	unsigned long expire;
+	const struct parport_pc_private *priv = port->physport->private_data;
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (port->physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_ecp_write_data(port, buf,
+							length, flags);
+
+	/* Switch to forward mode if necessary. */
+	if (port->physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+		/* Event 47: Set nInit high. */
+		parport_frob_control(port,
+				      PARPORT_CONTROL_INIT
+				      | PARPORT_CONTROL_AUTOFD,
+				      PARPORT_CONTROL_INIT
+				      | PARPORT_CONTROL_AUTOFD);
+
+		/* Event 49: PError goes high. */
+		r = parport_wait_peripheral(port,
+					     PARPORT_STATUS_PAPEROUT,
+					     PARPORT_STATUS_PAPEROUT);
+		if (r) {
+			printk(KERN_DEBUG "%s: PError timeout (%d) "
+				"in ecp_write_block_pio\n", port->name, r);
+		}
+	}
+
+	/* Set up ECP parallel port mode.*/
+	parport_pc_data_forward(port); /* Must be in PS2 mode */
+	parport_pc_frob_control(port,
+				 PARPORT_CONTROL_STROBE |
+				 PARPORT_CONTROL_AUTOFD,
+				 0);
+	r = change_mode(port, ECR_ECP); /* ECP FIFO */
+	if (r)
+		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+								port->name);
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+	/* Write the data to the FIFO. */
+	written = parport_pc_fifo_write_block(port, buf, length);
+
+	/* Finish up. */
+	/* For some hardware we don't want to touch the mode until
+	 * the FIFO is empty, so allow 4 seconds for each position
+	 * in the fifo.
+	 */
+	expire = jiffies + (priv->fifo_depth * (HZ * 4));
+	do {
+		/* Wait for the FIFO to empty */
+		r = change_mode(port, ECR_PS2);
+		if (r != -EBUSY)
+			break;
+	} while (time_before(jiffies, expire));
+	if (r == -EBUSY) {
+
+		printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
+
+		/* Prevent further data transfer. */
+		frob_set_mode(port, ECR_TST);
+
+		/* Adjust for the contents of the FIFO. */
+		for (written -= priv->fifo_depth; ; written++) {
+			if (inb(ECONTROL(port)) & 0x2) {
+				/* Full up. */
+				break;
+			}
+			outb(0, FIFO(port));
+		}
+
+		/* Reset the FIFO and return to PS2 mode. */
+		frob_set_mode(port, ECR_PS2);
+
+		/* Host transfer recovery. */
+		parport_pc_data_reverse(port); /* Must be in PS2 mode */
+		udelay(5);
+		parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
+		r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
+		if (r)
+			printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
+				"in ecp_write_block_pio\n", port->name, r);
+
+		parport_frob_control(port,
+				      PARPORT_CONTROL_INIT,
+				      PARPORT_CONTROL_INIT);
+		r = parport_wait_peripheral(port,
+					     PARPORT_STATUS_PAPEROUT,
+					     PARPORT_STATUS_PAPEROUT);
+		if (r)
+			printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
+				"in ecp_write_block_pio\n", port->name, r);
+	}
+
+	r = parport_wait_peripheral(port,
+				     PARPORT_STATUS_BUSY,
+				     PARPORT_STATUS_BUSY);
+	if (r)
+		printk(KERN_DEBUG
+			"%s: BUSY timeout (%d) in ecp_write_block_pio\n",
+			port->name, r);
+
+	port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	return written;
+}
+
+#if 0
+static size_t parport_pc_ecp_read_block_pio(struct parport *port,
+					     void *buf, size_t length,
+					     int flags)
+{
+	size_t left = length;
+	size_t fifofull;
+	int r;
+	const int fifo = FIFO(port);
+	const struct parport_pc_private *priv = port->physport->private_data;
+	const int fifo_depth = priv->fifo_depth;
+	char *bufp = buf;
+
+	port = port->physport;
+	DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+	dump_parport_state("enter fcn", port);
+
+	/* Special case: a timeout of zero means we cannot call schedule().
+	 * Also if O_NONBLOCK is set then use the default implementation. */
+	if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+		return parport_ieee1284_ecp_read_data(port, buf,
+						       length, flags);
+
+	if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
+		/* If the peripheral is allowed to send RLE compressed
+		 * data, it is possible for a byte to expand to 128
+		 * bytes in the FIFO. */
+		fifofull = 128;
+	} else {
+		fifofull = fifo_depth;
+	}
+
+	/* If the caller wants less than a full FIFO's worth of data,
+	 * go through software emulation.  Otherwise we may have to throw
+	 * away data. */
+	if (length < fifofull)
+		return parport_ieee1284_ecp_read_data(port, buf,
+						       length, flags);
+
+	if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
+		/* change to reverse-idle phase (must be in forward-idle) */
+
+		/* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
+		parport_frob_control(port,
+				      PARPORT_CONTROL_AUTOFD
+				      | PARPORT_CONTROL_STROBE,
+				      PARPORT_CONTROL_AUTOFD);
+		parport_pc_data_reverse(port); /* Must be in PS2 mode */
+		udelay(5);
+		/* Event 39: Set nInit low to initiate bus reversal */
+		parport_frob_control(port,
+				      PARPORT_CONTROL_INIT,
+				      0);
+		/* Event 40: Wait for  nAckReverse (PError) to go low */
+		r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
+		if (r) {
+			printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
+				"in ecp_read_block_pio\n", port->name, r);
+			return 0;
+		}
+	}
+
+	/* Set up ECP FIFO mode.*/
+/*	parport_pc_frob_control(port,
+				 PARPORT_CONTROL_STROBE |
+				 PARPORT_CONTROL_AUTOFD,
+				 PARPORT_CONTROL_AUTOFD); */
+	r = change_mode(port, ECR_ECP); /* ECP FIFO */
+	if (r)
+		printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
+								port->name);
+
+	port->ieee1284.phase = IEEE1284_PH_REV_DATA;
+
+	/* the first byte must be collected manually */
+	dump_parport_state("pre 43", port);
+	/* Event 43: Wait for nAck to go low */
+	r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
+	if (r) {
+		/* timed out while reading -- no data */
+		printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
+		goto out_no_data;
+	}
+	/* read byte */
+	*bufp++ = inb(DATA(port));
+	left--;
+	dump_parport_state("43-44", port);
+	/* Event 44: nAutoFd (HostAck) goes high to acknowledge */
+	parport_pc_frob_control(port,
+				 PARPORT_CONTROL_AUTOFD,
+				 0);
+	dump_parport_state("pre 45", port);
+	/* Event 45: Wait for nAck to go high */
+	/* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
+						PARPORT_STATUS_ACK); */
+	dump_parport_state("post 45", port);
+	r = 0;
+	if (r) {
+		/* timed out while waiting for peripheral to respond to ack */
+		printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
+
+		/* keep hold of the byte we've got already */
+		goto out_no_data;
+	}
+	/* Event 46: nAutoFd (HostAck) goes low to accept more data */
+	parport_pc_frob_control(port,
+				 PARPORT_CONTROL_AUTOFD,
+				 PARPORT_CONTROL_AUTOFD);
+
+
+	dump_parport_state("rev idle", port);
+	/* Do the transfer. */
+	while (left > fifofull) {
+		int ret;
+		unsigned long expire = jiffies + port->cad->timeout;
+		unsigned char ecrval = inb(ECONTROL(port));
+
+		if (need_resched() && time_before(jiffies, expire))
+			/* Can't yield the port. */
+			schedule();
+
+		/* At this point, the FIFO may already be full. In
+		 * that case ECP is already holding back the
+		 * peripheral (assuming proper design) with a delayed
+		 * handshake.  Work fast to avoid a peripheral
+		 * timeout.  */
+
+		if (ecrval & 0x01) {
+			/* FIFO is empty. Wait for interrupt. */
+			dump_parport_state("FIFO empty", port);
+
+			/* Anyone else waiting for the port? */
+			if (port->waithead) {
+				printk(KERN_DEBUG "Somebody wants the port\n");
+				break;
+			}
+
+			/* Clear serviceIntr */
+			ECR_WRITE(port, ecrval & ~(1<<2));
+false_alarm:
+			dump_parport_state("waiting", port);
+			ret = parport_wait_event(port, HZ);
+			DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
+									ret);
+			if (ret < 0)
+				break;
+			ret = 0;
+			if (!time_before(jiffies, expire)) {
+				/* Timed out. */
+				dump_parport_state("timeout", port);
+				printk(KERN_DEBUG "PIO read timed out\n");
+				break;
+			}
+			ecrval = inb(ECONTROL(port));
+			if (!(ecrval & (1<<2))) {
+				if (need_resched() &&
+				    time_before(jiffies, expire)) {
+					schedule();
+				}
+				goto false_alarm;
+			}
+
+			/* Depending on how the FIFO threshold was
+			 * set, how long interrupt service took, and
+			 * how fast the peripheral is, we might be
+			 * lucky and have a just filled FIFO. */
+			continue;
+		}
+
+		if (ecrval & 0x02) {
+			/* FIFO is full. */
+			dump_parport_state("FIFO full", port);
+			insb(fifo, bufp, fifo_depth);
+			bufp += fifo_depth;
+			left -= fifo_depth;
+			continue;
+		}
+
+		DPRINTK(KERN_DEBUG
+		  "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+
+		/* FIFO not filled.  We will cycle this loop for a while
+		 * and either the peripheral will fill it faster,
+		 * tripping a fast empty with insb, or we empty it. */
+		*bufp++ = inb(fifo);
+		left--;
+	}
+
+	/* scoop up anything left in the FIFO */
+	while (left && !(inb(ECONTROL(port) & 0x01))) {
+		*bufp++ = inb(fifo);
+		left--;
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+	dump_parport_state("rev idle2", port);
+
+out_no_data:
+
+	/* Go to forward idle mode to shut the peripheral up (event 47). */
+	parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
+
+	/* event 49: PError goes high */
+	r = parport_wait_peripheral(port,
+				     PARPORT_STATUS_PAPEROUT,
+				     PARPORT_STATUS_PAPEROUT);
+	if (r) {
+		printk(KERN_DEBUG
+			"%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
+			port->name, r);
+	}
+
+	port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+	/* Finish up. */
+	{
+		int lost = get_fifo_residue(port);
+		if (lost)
+			/* Shouldn't happen with compliant peripherals. */
+			printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
+				port->name, lost);
+	}
+
+	dump_parport_state("fwd idle", port);
+	return length - left;
+}
+#endif  /*  0  */
+#endif /* IEEE 1284 support */
+#endif /* Allowed to use FIFO/DMA */
+
+
+/*
+ *	******************************************
+ *	INITIALISATION AND MODULE STUFF BELOW HERE
+ *	******************************************
+ */
+
+/* GCC is not inlining extern inline function later overwriten to non-inline,
+   so we use outlined_ variants here.  */
+static const struct parport_operations parport_pc_ops = {
+	.write_data	= parport_pc_write_data,
+	.read_data	= parport_pc_read_data,
+
+	.write_control	= parport_pc_write_control,
+	.read_control	= parport_pc_read_control,
+	.frob_control	= parport_pc_frob_control,
+
+	.read_status	= parport_pc_read_status,
+
+	.enable_irq	= parport_pc_enable_irq,
+	.disable_irq	= parport_pc_disable_irq,
+
+	.data_forward	= parport_pc_data_forward,
+	.data_reverse	= parport_pc_data_reverse,
+
+	.init_state	= parport_pc_init_state,
+	.save_state	= parport_pc_save_state,
+	.restore_state	= parport_pc_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+#ifdef CONFIG_PARPORT_PC_SUPERIO
+
+static struct superio_struct *find_free_superio(void)
+{
+	int i;
+	for (i = 0; i < NR_SUPERIOS; i++)
+		if (superios[i].io == 0)
+			return &superios[i];
+	return NULL;
+}
+
+
+/* Super-IO chipset detection, Winbond, SMSC */
+static void __devinit show_parconfig_smsc37c669(int io, int key)
+{
+	int cr1, cr4, cra, cr23, cr26, cr27;
+	struct superio_struct *s;
+
+	static const char *const modes[] = {
+		"SPP and Bidirectional (PS/2)",
+		"EPP and SPP",
+		"ECP",
+		"ECP and EPP" };
+
+	outb(key, io);
+	outb(key, io);
+	outb(1, io);
+	cr1 = inb(io + 1);
+	outb(4, io);
+	cr4 = inb(io + 1);
+	outb(0x0a, io);
+	cra = inb(io + 1);
+	outb(0x23, io);
+	cr23 = inb(io + 1);
+	outb(0x26, io);
+	cr26 = inb(io + 1);
+	outb(0x27, io);
+	cr27 = inb(io + 1);
+	outb(0xaa, io);
+
+	if (verbose_probing) {
+		printk(KERN_INFO
+			"SMSC 37c669 LPT Config: cr_1=0x%02x, 4=0x%02x, "
+			"A=0x%2x, 23=0x%02x, 26=0x%02x, 27=0x%02x\n",
+			cr1, cr4, cra, cr23, cr26, cr27);
+
+		/* The documentation calls DMA and IRQ-Lines by letters, so
+		   the board maker can/will wire them
+		   appropriately/randomly...  G=reserved H=IDE-irq, */
+		printk(KERN_INFO
+	"SMSC LPT Config: io=0x%04x, irq=%c, dma=%c, fifo threshold=%d\n",
+				cr23 * 4,
+				(cr27 & 0x0f) ? 'A' - 1 + (cr27 & 0x0f) : '-',
+				(cr26 & 0x0f) ? 'A' - 1 + (cr26 & 0x0f) : '-',
+				cra & 0x0f);
+		printk(KERN_INFO "SMSC LPT Config: enabled=%s power=%s\n",
+		       (cr23 * 4 >= 0x100) ? "yes" : "no",
+		       (cr1 & 4) ? "yes" : "no");
+		printk(KERN_INFO
+			"SMSC LPT Config: Port mode=%s, EPP version =%s\n",
+				(cr1 & 0x08) ? "Standard mode only (SPP)"
+					      : modes[cr4 & 0x03],
+				(cr4 & 0x40) ? "1.7" : "1.9");
+	}
+
+	/* Heuristics !  BIOS setup for this mainboard device limits
+	   the choices to standard settings, i.e. io-address and IRQ
+	   are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
+	   DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
+	if (cr23 * 4 >= 0x100) { /* if active */
+		s = find_free_superio();
+		if (s == NULL)
+			printk(KERN_INFO "Super-IO: too many chips!\n");
+		else {
+			int d;
+			switch (cr23 * 4) {
+			case 0x3bc:
+				s->io = 0x3bc;
+				s->irq = 7;
+				break;
+			case 0x378:
+				s->io = 0x378;
+				s->irq = 7;
+				break;
+			case 0x278:
+				s->io = 0x278;
+				s->irq = 5;
+			}
+			d = (cr26 & 0x0f);
+			if (d == 1 || d == 3)
+				s->dma = d;
+			else
+				s->dma = PARPORT_DMA_NONE;
+		}
+	}
+}
+
+
+static void __devinit show_parconfig_winbond(int io, int key)
+{
+	int cr30, cr60, cr61, cr70, cr74, crf0;
+	struct superio_struct *s;
+	static const char *const modes[] = {
+		"Standard (SPP) and Bidirectional(PS/2)", /* 0 */
+		"EPP-1.9 and SPP",
+		"ECP",
+		"ECP and EPP-1.9",
+		"Standard (SPP)",
+		"EPP-1.7 and SPP",		/* 5 */
+		"undefined!",
+		"ECP and EPP-1.7" };
+	static char *const irqtypes[] = {
+		"pulsed low, high-Z",
+		"follows nACK" };
+
+	/* The registers are called compatible-PnP because the
+	   register layout is modelled after ISA-PnP, the access
+	   method is just another ... */
+	outb(key, io);
+	outb(key, io);
+	outb(0x07, io);   /* Register 7: Select Logical Device */
+	outb(0x01, io + 1); /* LD1 is Parallel Port */
+	outb(0x30, io);
+	cr30 = inb(io + 1);
+	outb(0x60, io);
+	cr60 = inb(io + 1);
+	outb(0x61, io);
+	cr61 = inb(io + 1);
+	outb(0x70, io);
+	cr70 = inb(io + 1);
+	outb(0x74, io);
+	cr74 = inb(io + 1);
+	outb(0xf0, io);
+	crf0 = inb(io + 1);
+	outb(0xaa, io);
+
+	if (verbose_probing) {
+		printk(KERN_INFO
+    "Winbond LPT Config: cr_30=%02x 60,61=%02x%02x 70=%02x 74=%02x, f0=%02x\n",
+					cr30, cr60, cr61, cr70, cr74, crf0);
+		printk(KERN_INFO "Winbond LPT Config: active=%s, io=0x%02x%02x irq=%d, ",
+		       (cr30 & 0x01) ? "yes" : "no", cr60, cr61, cr70 & 0x0f);
+		if ((cr74 & 0x07) > 3)
+			printk("dma=none\n");
+		else
+			printk("dma=%d\n", cr74 & 0x07);
+		printk(KERN_INFO
+		    "Winbond LPT Config: irqtype=%s, ECP fifo threshold=%d\n",
+					irqtypes[crf0>>7], (crf0>>3)&0x0f);
+		printk(KERN_INFO "Winbond LPT Config: Port mode=%s\n",
+					modes[crf0 & 0x07]);
+	}
+
+	if (cr30 & 0x01) { /* the settings can be interrogated later ... */
+		s = find_free_superio();
+		if (s == NULL)
+			printk(KERN_INFO "Super-IO: too many chips!\n");
+		else {
+			s->io = (cr60 << 8) | cr61;
+			s->irq = cr70 & 0x0f;
+			s->dma = (((cr74 & 0x07) > 3) ?
+					   PARPORT_DMA_NONE : (cr74 & 0x07));
+		}
+	}
+}
+
+static void __devinit decode_winbond(int efer, int key, int devid,
+							int devrev, int oldid)
+{
+	const char *type = "unknown";
+	int id, progif = 2;
+
+	if (devid == devrev)
+		/* simple heuristics, we happened to read some
+		   non-winbond register */
+		return;
+
+	id = (devid << 8) | devrev;
+
+	/* Values are from public data sheets pdf files, I can just
+	   confirm 83977TF is correct :-) */
+	if (id == 0x9771)
+		type = "83977F/AF";
+	else if (id == 0x9773)
+		type = "83977TF / SMSC 97w33x/97w34x";
+	else if (id == 0x9774)
+		type = "83977ATF";
+	else if ((id & ~0x0f) == 0x5270)
+		type = "83977CTF / SMSC 97w36x";
+	else if ((id & ~0x0f) == 0x52f0)
+		type = "83977EF / SMSC 97w35x";
+	else if ((id & ~0x0f) == 0x5210)
+		type = "83627";
+	else if ((id & ~0x0f) == 0x6010)
+		type = "83697HF";
+	else if ((oldid & 0x0f) == 0x0a) {
+		type = "83877F";
+		progif = 1;
+	} else if ((oldid & 0x0f) == 0x0b) {
+		type = "83877AF";
+		progif = 1;
+	} else if ((oldid & 0x0f) == 0x0c) {
+		type = "83877TF";
+		progif = 1;
+	} else if ((oldid & 0x0f) == 0x0d) {
+		type = "83877ATF";
+		progif = 1;
+	} else
+		progif = 0;
+
+	if (verbose_probing)
+		printk(KERN_INFO "Winbond chip at EFER=0x%x key=0x%02x "
+		       "devid=%02x devrev=%02x oldid=%02x type=%s\n",
+		       efer, key, devid, devrev, oldid, type);
+
+	if (progif == 2)
+		show_parconfig_winbond(efer, key);
+}
+
+static void __devinit decode_smsc(int efer, int key, int devid, int devrev)
+{
+	const char *type = "unknown";
+	void (*func)(int io, int key);
+	int id;
+
+	if (devid == devrev)
+		/* simple heuristics, we happened to read some
+		   non-smsc register */
+		return;
+
+	func = NULL;
+	id = (devid << 8) | devrev;
+
+	if (id == 0x0302) {
+		type = "37c669";
+		func = show_parconfig_smsc37c669;
+	} else if (id == 0x6582)
+		type = "37c665IR";
+	else if	(devid == 0x65)
+		type = "37c665GT";
+	else if	(devid == 0x66)
+		type = "37c666GT";
+
+	if (verbose_probing)
+		printk(KERN_INFO "SMSC chip at EFER=0x%x "
+		       "key=0x%02x devid=%02x devrev=%02x type=%s\n",
+		       efer, key, devid, devrev, type);
+
+	if (func)
+		func(efer, key);
+}
+
+
+static void __devinit winbond_check(int io, int key)
+{
+	int origval, devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+
+	if (!request_region(io, 3, __func__))
+		return;
+
+	origval = inb(io); /* Save original value */
+
+	/* First probe without key */
+	outb(0x20, io);
+	x_devid = inb(io + 1);
+	outb(0x21, io);
+	x_devrev = inb(io + 1);
+	outb(0x09, io);
+	x_oldid = inb(io + 1);
+
+	outb(key, io);
+	outb(key, io);     /* Write Magic Sequence to EFER, extended
+			      function enable register */
+	outb(0x20, io);    /* Write EFIR, extended function index register */
+	devid = inb(io + 1);  /* Read EFDR, extended function data register */
+	outb(0x21, io);
+	devrev = inb(io + 1);
+	outb(0x09, io);
+	oldid = inb(io + 1);
+	outb(0xaa, io);    /* Magic Seal */
+
+	outb(origval, io); /* in case we poked some entirely different hardware */
+
+	if ((x_devid == devid) && (x_devrev == devrev) && (x_oldid == oldid))
+		goto out; /* protection against false positives */
+
+	decode_winbond(io, key, devid, devrev, oldid);
+out:
+	release_region(io, 3);
+}
+
+static void __devinit winbond_check2(int io, int key)
+{
+	int origval[3], devid, devrev, oldid, x_devid, x_devrev, x_oldid;
+
+	if (!request_region(io, 3, __func__))
+		return;
+
+	origval[0] = inb(io); /* Save original values */
+	origval[1] = inb(io + 1);
+	origval[2] = inb(io + 2);
+
+	/* First probe without the key */
+	outb(0x20, io + 2);
+	x_devid = inb(io + 2);
+	outb(0x21, io + 1);
+	x_devrev = inb(io + 2);
+	outb(0x09, io + 1);
+	x_oldid = inb(io + 2);
+
+	outb(key, io);     /* Write Magic Byte to EFER, extended
+			      function enable register */
+	outb(0x20, io + 2);  /* Write EFIR, extended function index register */
+	devid = inb(io + 2);  /* Read EFDR, extended function data register */
+	outb(0x21, io + 1);
+	devrev = inb(io + 2);
+	outb(0x09, io + 1);
+	oldid = inb(io + 2);
+	outb(0xaa, io);    /* Magic Seal */
+
+	outb(origval[0], io); /* in case we poked some entirely different hardware */
+	outb(origval[1], io + 1);
+	outb(origval[2], io + 2);
+
+	if (x_devid == devid && x_devrev == devrev && x_oldid == oldid)
+		goto out; /* protection against false positives */
+
+	decode_winbond(io, key, devid, devrev, oldid);
+out:
+	release_region(io, 3);
+}
+
+static void __devinit smsc_check(int io, int key)
+{
+	int origval, id, rev, oldid, oldrev, x_id, x_rev, x_oldid, x_oldrev;
+
+	if (!request_region(io, 3, __func__))
+		return;
+
+	origval = inb(io); /* Save original value */
+
+	/* First probe without the key */
+	outb(0x0d, io);
+	x_oldid = inb(io + 1);
+	outb(0x0e, io);
+	x_oldrev = inb(io + 1);
+	outb(0x20, io);
+	x_id = inb(io + 1);
+	outb(0x21, io);
+	x_rev = inb(io + 1);
+
+	outb(key, io);
+	outb(key, io);     /* Write Magic Sequence to EFER, extended
+			      function enable register */
+	outb(0x0d, io);    /* Write EFIR, extended function index register */
+	oldid = inb(io + 1);  /* Read EFDR, extended function data register */
+	outb(0x0e, io);
+	oldrev = inb(io + 1);
+	outb(0x20, io);
+	id = inb(io + 1);
+	outb(0x21, io);
+	rev = inb(io + 1);
+	outb(0xaa, io);    /* Magic Seal */
+
+	outb(origval, io); /* in case we poked some entirely different hardware */
+
+	if (x_id == id && x_oldrev == oldrev &&
+	    x_oldid == oldid && x_rev == rev)
+		goto out; /* protection against false positives */
+
+	decode_smsc(io, key, oldid, oldrev);
+out:
+	release_region(io, 3);
+}
+
+
+static void __devinit detect_and_report_winbond(void)
+{
+	if (verbose_probing)
+		printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
+	winbond_check(0x3f0, 0x87);
+	winbond_check(0x370, 0x87);
+	winbond_check(0x2e , 0x87);
+	winbond_check(0x4e , 0x87);
+	winbond_check(0x3f0, 0x86);
+	winbond_check2(0x250, 0x88);
+	winbond_check2(0x250, 0x89);
+}
+
+static void __devinit detect_and_report_smsc(void)
+{
+	if (verbose_probing)
+		printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
+	smsc_check(0x3f0, 0x55);
+	smsc_check(0x370, 0x55);
+	smsc_check(0x3f0, 0x44);
+	smsc_check(0x370, 0x44);
+}
+
+static void __devinit detect_and_report_it87(void)
+{
+	u16 dev;
+	u8 origval, r;
+	if (verbose_probing)
+		printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");
+	if (!request_muxed_region(0x2e, 2, __func__))
+		return;
+	origval = inb(0x2e);		/* Save original value */
+	outb(0x87, 0x2e);
+	outb(0x01, 0x2e);
+	outb(0x55, 0x2e);
+	outb(0x55, 0x2e);
+	outb(0x20, 0x2e);
+	dev = inb(0x2f) << 8;
+	outb(0x21, 0x2e);
+	dev |= inb(0x2f);
+	if (dev == 0x8712 || dev == 0x8705 || dev == 0x8715 ||
+	    dev == 0x8716 || dev == 0x8718 || dev == 0x8726) {
+		printk(KERN_INFO "IT%04X SuperIO detected.\n", dev);
+		outb(0x07, 0x2E);	/* Parallel Port */
+		outb(0x03, 0x2F);
+		outb(0xF0, 0x2E);	/* BOOT 0x80 off */
+		r = inb(0x2f);
+		outb(0xF0, 0x2E);
+		outb(r | 8, 0x2F);
+		outb(0x02, 0x2E);	/* Lock */
+		outb(0x02, 0x2F);
+	} else {
+		outb(origval, 0x2e);	/* Oops, sorry to disturb */
+	}
+	release_region(0x2e, 2);
+}
+#endif /* CONFIG_PARPORT_PC_SUPERIO */
+
+static struct superio_struct *find_superio(struct parport *p)
+{
+	int i;
+	for (i = 0; i < NR_SUPERIOS; i++)
+		if (superios[i].io != p->base)
+			return &superios[i];
+	return NULL;
+}
+
+static int get_superio_dma(struct parport *p)
+{
+	struct superio_struct *s = find_superio(p);
+	if (s)
+		return s->dma;
+	return PARPORT_DMA_NONE;
+}
+
+static int get_superio_irq(struct parport *p)
+{
+	struct superio_struct *s = find_superio(p);
+	if (s)
+		return s->irq;
+	return PARPORT_IRQ_NONE;
+}
+
+
+/* --- Mode detection ------------------------------------- */
+
+/*
+ * Checks for port existence, all ports support SPP MODE
+ * Returns:
+ *         0           :  No parallel port at this address
+ *  PARPORT_MODE_PCSPP :  SPP port detected
+ *                        (if the user specified an ioport himself,
+ *                         this shall always be the case!)
+ *
+ */
+static int parport_SPP_supported(struct parport *pb)
+{
+	unsigned char r, w;
+
+	/*
+	 * first clear an eventually pending EPP timeout
+	 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
+	 * that does not even respond to SPP cycles if an EPP
+	 * timeout is pending
+	 */
+	clear_epp_timeout(pb);
+
+	/* Do a simple read-write test to make sure the port exists. */
+	w = 0xc;
+	outb(w, CONTROL(pb));
+
+	/* Is there a control register that we can read from?  Some
+	 * ports don't allow reads, so read_control just returns a
+	 * software copy. Some ports _do_ allow reads, so bypass the
+	 * software copy here.  In addition, some bits aren't
+	 * writable. */
+	r = inb(CONTROL(pb));
+	if ((r & 0xf) == w) {
+		w = 0xe;
+		outb(w, CONTROL(pb));
+		r = inb(CONTROL(pb));
+		outb(0xc, CONTROL(pb));
+		if ((r & 0xf) == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	if (user_specified)
+		/* That didn't work, but the user thinks there's a
+		 * port here. */
+		printk(KERN_INFO "parport 0x%lx (WARNING): CTR: "
+			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+
+	/* Try the data register.  The data lines aren't tri-stated at
+	 * this stage, so we expect back what we wrote. */
+	w = 0xaa;
+	parport_pc_write_data(pb, w);
+	r = parport_pc_read_data(pb);
+	if (r == w) {
+		w = 0x55;
+		parport_pc_write_data(pb, w);
+		r = parport_pc_read_data(pb);
+		if (r == w)
+			return PARPORT_MODE_PCSPP;
+	}
+
+	if (user_specified) {
+		/* Didn't work, but the user is convinced this is the
+		 * place. */
+		printk(KERN_INFO "parport 0x%lx (WARNING): DATA: "
+			"wrote 0x%02x, read 0x%02x\n", pb->base, w, r);
+		printk(KERN_INFO "parport 0x%lx: You gave this address, "
+			"but there is probably no parallel port there!\n",
+			pb->base);
+	}
+
+	/* It's possible that we can't read the control register or
+	 * the data register.  In that case just believe the user. */
+	if (user_specified)
+		return PARPORT_MODE_PCSPP;
+
+	return 0;
+}
+
+/* Check for ECR
+ *
+ * Old style XT ports alias io ports every 0x400, hence accessing ECR
+ * on these cards actually accesses the CTR.
+ *
+ * Modern cards don't do this but reading from ECR will return 0xff
+ * regardless of what is written here if the card does NOT support
+ * ECP.
+ *
+ * We first check to see if ECR is the same as CTR.  If not, the low
+ * two bits of ECR aren't writable, so we check by writing ECR and
+ * reading it back to see if it's what we expect.
+ */
+static int parport_ECR_present(struct parport *pb)
+{
+	struct parport_pc_private *priv = pb->private_data;
+	unsigned char r = 0xc;
+
+	outb(r, CONTROL(pb));
+	if ((inb(ECONTROL(pb)) & 0x3) == (r & 0x3)) {
+		outb(r ^ 0x2, CONTROL(pb)); /* Toggle bit 1 */
+
+		r = inb(CONTROL(pb));
+		if ((inb(ECONTROL(pb)) & 0x2) == (r & 0x2))
+			goto no_reg; /* Sure that no ECR register exists */
+	}
+
+	if ((inb(ECONTROL(pb)) & 0x3) != 0x1)
+		goto no_reg;
+
+	ECR_WRITE(pb, 0x34);
+	if (inb(ECONTROL(pb)) != 0x35)
+		goto no_reg;
+
+	priv->ecr = 1;
+	outb(0xc, CONTROL(pb));
+
+	/* Go to mode 000 */
+	frob_set_mode(pb, ECR_SPP);
+
+	return 1;
+
+ no_reg:
+	outb(0xc, CONTROL(pb));
+	return 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+/* Detect PS/2 support.
+ *
+ * Bit 5 (0x20) sets the PS/2 data direction; setting this high
+ * allows us to read data from the data lines.  In theory we would get back
+ * 0xff but any peripheral attached to the port may drag some or all of the
+ * lines down to zero.  So if we get back anything that isn't the contents
+ * of the data register we deem PS/2 support to be present.
+ *
+ * Some SPP ports have "half PS/2" ability - you can't turn off the line
+ * drivers, but an external peripheral with sufficiently beefy drivers of
+ * its own can overpower them and assert its own levels onto the bus, from
+ * where they can then be read back as normal.  Ports with this property
+ * and the right type of device attached are likely to fail the SPP test,
+ * (as they will appear to have stuck bits) and so the fact that they might
+ * be misdetected here is rather academic.
+ */
+
+static int parport_PS2_supported(struct parport *pb)
+{
+	int ok = 0;
+
+	clear_epp_timeout(pb);
+
+	/* try to tri-state the buffer */
+	parport_pc_data_reverse(pb);
+
+	parport_pc_write_data(pb, 0x55);
+	if (parport_pc_read_data(pb) != 0x55)
+		ok++;
+
+	parport_pc_write_data(pb, 0xaa);
+	if (parport_pc_read_data(pb) != 0xaa)
+		ok++;
+
+	/* cancel input mode */
+	parport_pc_data_forward(pb);
+
+	if (ok) {
+		pb->modes |= PARPORT_MODE_TRISTATE;
+	} else {
+		struct parport_pc_private *priv = pb->private_data;
+		priv->ctr_writable &= ~0x20;
+	}
+
+	return ok;
+}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+static int parport_ECP_supported(struct parport *pb)
+{
+	int i;
+	int config, configb;
+	int pword;
+	struct parport_pc_private *priv = pb->private_data;
+	/* Translate ECP intrLine to ISA irq value */
+	static const int intrline[] = { 0, 7, 9, 10, 11, 14, 15, 5 };
+
+	/* If there is no ECR, we have no hope of supporting ECP. */
+	if (!priv->ecr)
+		return 0;
+
+	/* Find out FIFO depth */
+	ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE(pb, ECR_TST << 5); /* TEST FIFO */
+	for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02); i++)
+		outb(0xaa, FIFO(pb));
+
+	/*
+	 * Using LGS chipset it uses ECR register, but
+	 * it doesn't support ECP or FIFO MODE
+	 */
+	if (i == 1024) {
+		ECR_WRITE(pb, ECR_SPP << 5);
+		return 0;
+	}
+
+	priv->fifo_depth = i;
+	if (verbose_probing)
+		printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
+
+	/* Find out writeIntrThreshold */
+	frob_econtrol(pb, 1<<2, 1<<2);
+	frob_econtrol(pb, 1<<2, 0);
+	for (i = 1; i <= priv->fifo_depth; i++) {
+		inb(FIFO(pb));
+		udelay(50);
+		if (inb(ECONTROL(pb)) & (1<<2))
+			break;
+	}
+
+	if (i <= priv->fifo_depth) {
+		if (verbose_probing)
+			printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
+				pb->base, i);
+	} else
+		/* Number of bytes we know we can write if we get an
+		   interrupt. */
+		i = 0;
+
+	priv->writeIntrThreshold = i;
+
+	/* Find out readIntrThreshold */
+	frob_set_mode(pb, ECR_PS2); /* Reset FIFO and enable PS2 */
+	parport_pc_data_reverse(pb); /* Must be in PS2 mode */
+	frob_set_mode(pb, ECR_TST); /* Test FIFO */
+	frob_econtrol(pb, 1<<2, 1<<2);
+	frob_econtrol(pb, 1<<2, 0);
+	for (i = 1; i <= priv->fifo_depth; i++) {
+		outb(0xaa, FIFO(pb));
+		if (inb(ECONTROL(pb)) & (1<<2))
+			break;
+	}
+
+	if (i <= priv->fifo_depth) {
+		if (verbose_probing)
+			printk(KERN_INFO "0x%lx: readIntrThreshold is %d\n",
+				pb->base, i);
+	} else
+		/* Number of bytes we can read if we get an interrupt. */
+		i = 0;
+
+	priv->readIntrThreshold = i;
+
+	ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE(pb, 0xf4); /* Configuration mode */
+	config = inb(CONFIGA(pb));
+	pword = (config >> 4) & 0x7;
+	switch (pword) {
+	case 0:
+		pword = 2;
+		printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
+			pb->base);
+		break;
+	case 2:
+		pword = 4;
+		printk(KERN_WARNING "0x%lx: Unsupported pword size!\n",
+			pb->base);
+		break;
+	default:
+		printk(KERN_WARNING "0x%lx: Unknown implementation ID\n",
+			pb->base);
+		/* Assume 1 */
+	case 1:
+		pword = 1;
+	}
+	priv->pword = pword;
+
+	if (verbose_probing) {
+		printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
+			pb->base, 8 * pword);
+
+		printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
+			config & 0x80 ? "Level" : "Pulses");
+
+		configb = inb(CONFIGB(pb));
+		printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
+			pb->base, config, configb);
+		printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
+		if ((configb >> 3) & 0x07)
+			printk("%d", intrline[(configb >> 3) & 0x07]);
+		else
+			printk("<none or set by other means>");
+		printk(" dma=");
+		if ((configb & 0x03) == 0x00)
+			printk("<none or set by other means>\n");
+		else
+			printk("%d\n", configb & 0x07);
+	}
+
+	/* Go back to mode 000 */
+	frob_set_mode(pb, ECR_SPP);
+
+	return 1;
+}
+#endif
+
+static int parport_ECPPS2_supported(struct parport *pb)
+{
+	const struct parport_pc_private *priv = pb->private_data;
+	int result;
+	unsigned char oecr;
+
+	if (!priv->ecr)
+		return 0;
+
+	oecr = inb(ECONTROL(pb));
+	ECR_WRITE(pb, ECR_PS2 << 5);
+	result = parport_PS2_supported(pb);
+	ECR_WRITE(pb, oecr);
+	return result;
+}
+
+/* EPP mode detection  */
+
+static int parport_EPP_supported(struct parport *pb)
+{
+	const struct parport_pc_private *priv = pb->private_data;
+
+	/*
+	 * Theory:
+	 *	Bit 0 of STR is the EPP timeout bit, this bit is 0
+	 *	when EPP is possible and is set high when an EPP timeout
+	 *	occurs (EPP uses the HALT line to stop the CPU while it does
+	 *	the byte transfer, an EPP timeout occurs if the attached
+	 *	device fails to respond after 10 micro seconds).
+	 *
+	 *	This bit is cleared by either reading it (National Semi)
+	 *	or writing a 1 to the bit (SMC, UMC, WinBond), others ???
+	 *	This bit is always high in non EPP modes.
+	 */
+
+	/* If EPP timeout bit clear then EPP available */
+	if (!clear_epp_timeout(pb))
+		return 0;  /* No way to clear timeout */
+
+	/* Check for Intel bug. */
+	if (priv->ecr) {
+		unsigned char i;
+		for (i = 0x00; i < 0x80; i += 0x20) {
+			ECR_WRITE(pb, i);
+			if (clear_epp_timeout(pb)) {
+				/* Phony EPP in ECP. */
+				return 0;
+			}
+		}
+	}
+
+	pb->modes |= PARPORT_MODE_EPP;
+
+	/* Set up access functions to use EPP hardware. */
+	pb->ops->epp_read_data = parport_pc_epp_read_data;
+	pb->ops->epp_write_data = parport_pc_epp_write_data;
+	pb->ops->epp_read_addr = parport_pc_epp_read_addr;
+	pb->ops->epp_write_addr = parport_pc_epp_write_addr;
+
+	return 1;
+}
+
+static int parport_ECPEPP_supported(struct parport *pb)
+{
+	struct parport_pc_private *priv = pb->private_data;
+	int result;
+	unsigned char oecr;
+
+	if (!priv->ecr)
+		return 0;
+
+	oecr = inb(ECONTROL(pb));
+	/* Search for SMC style EPP+ECP mode */
+	ECR_WRITE(pb, 0x80);
+	outb(0x04, CONTROL(pb));
+	result = parport_EPP_supported(pb);
+
+	ECR_WRITE(pb, oecr);
+
+	if (result) {
+		/* Set up access functions to use ECP+EPP hardware. */
+		pb->ops->epp_read_data = parport_pc_ecpepp_read_data;
+		pb->ops->epp_write_data = parport_pc_ecpepp_write_data;
+		pb->ops->epp_read_addr = parport_pc_ecpepp_read_addr;
+		pb->ops->epp_write_addr = parport_pc_ecpepp_write_addr;
+	}
+
+	return result;
+}
+
+#else /* No IEEE 1284 support */
+
+/* Don't bother probing for modes we know we won't use. */
+static int __devinit parport_PS2_supported(struct parport *pb) { return 0; }
+#ifdef CONFIG_PARPORT_PC_FIFO
+static int parport_ECP_supported(struct parport *pb)
+{
+	return 0;
+}
+#endif
+static int __devinit parport_EPP_supported(struct parport *pb)
+{
+	return 0;
+}
+
+static int __devinit parport_ECPEPP_supported(struct parport *pb)
+{
+	return 0;
+}
+
+static int __devinit parport_ECPPS2_supported(struct parport *pb)
+{
+	return 0;
+}
+
+#endif /* No IEEE 1284 support */
+
+/* --- IRQ detection -------------------------------------- */
+
+/* Only if supports ECP mode */
+static int programmable_irq_support(struct parport *pb)
+{
+	int irq, intrLine;
+	unsigned char oecr = inb(ECONTROL(pb));
+	static const int lookup[8] = {
+		PARPORT_IRQ_NONE, 7, 9, 10, 11, 14, 15, 5
+	};
+
+	ECR_WRITE(pb, ECR_CNF << 5); /* Configuration MODE */
+
+	intrLine = (inb(CONFIGB(pb)) >> 3) & 0x07;
+	irq = lookup[intrLine];
+
+	ECR_WRITE(pb, oecr);
+	return irq;
+}
+
+static int irq_probe_ECP(struct parport *pb)
+{
+	int i;
+	unsigned long irqs;
+
+	irqs = probe_irq_on();
+
+	ECR_WRITE(pb, ECR_SPP << 5); /* Reset FIFO */
+	ECR_WRITE(pb, (ECR_TST << 5) | 0x04);
+	ECR_WRITE(pb, ECR_TST << 5);
+
+	/* If Full FIFO sure that writeIntrThreshold is generated */
+	for (i = 0; i < 1024 && !(inb(ECONTROL(pb)) & 0x02) ; i++)
+		outb(0xaa, FIFO(pb));
+
+	pb->irq = probe_irq_off(irqs);
+	ECR_WRITE(pb, ECR_SPP << 5);
+
+	if (pb->irq <= 0)
+		pb->irq = PARPORT_IRQ_NONE;
+
+	return pb->irq;
+}
+
+/*
+ * This detection seems that only works in National Semiconductors
+ * This doesn't work in SMC, LGS, and Winbond
+ */
+static int irq_probe_EPP(struct parport *pb)
+{
+#ifndef ADVANCED_DETECT
+	return PARPORT_IRQ_NONE;
+#else
+	int irqs;
+	unsigned char oecr;
+
+	if (pb->modes & PARPORT_MODE_PCECR)
+		oecr = inb(ECONTROL(pb));
+
+	irqs = probe_irq_on();
+
+	if (pb->modes & PARPORT_MODE_PCECR)
+		frob_econtrol(pb, 0x10, 0x10);
+
+	clear_epp_timeout(pb);
+	parport_pc_frob_control(pb, 0x20, 0x20);
+	parport_pc_frob_control(pb, 0x10, 0x10);
+	clear_epp_timeout(pb);
+
+	/* Device isn't expecting an EPP read
+	 * and generates an IRQ.
+	 */
+	parport_pc_read_epp(pb);
+	udelay(20);
+
+	pb->irq = probe_irq_off(irqs);
+	if (pb->modes & PARPORT_MODE_PCECR)
+		ECR_WRITE(pb, oecr);
+	parport_pc_write_control(pb, 0xc);
+
+	if (pb->irq <= 0)
+		pb->irq = PARPORT_IRQ_NONE;
+
+	return pb->irq;
+#endif /* Advanced detection */
+}
+
+static int irq_probe_SPP(struct parport *pb)
+{
+	/* Don't even try to do this. */
+	return PARPORT_IRQ_NONE;
+}
+
+/* We will attempt to share interrupt requests since other devices
+ * such as sound cards and network cards seem to like using the
+ * printer IRQs.
+ *
+ * When ECP is available we can autoprobe for IRQs.
+ * NOTE: If we can autoprobe it, we can register the IRQ.
+ */
+static int parport_irq_probe(struct parport *pb)
+{
+	struct parport_pc_private *priv = pb->private_data;
+
+	if (priv->ecr) {
+		pb->irq = programmable_irq_support(pb);
+
+		if (pb->irq == PARPORT_IRQ_NONE)
+			pb->irq = irq_probe_ECP(pb);
+	}
+
+	if ((pb->irq == PARPORT_IRQ_NONE) && priv->ecr &&
+	    (pb->modes & PARPORT_MODE_EPP))
+		pb->irq = irq_probe_EPP(pb);
+
+	clear_epp_timeout(pb);
+
+	if (pb->irq == PARPORT_IRQ_NONE && (pb->modes & PARPORT_MODE_EPP))
+		pb->irq = irq_probe_EPP(pb);
+
+	clear_epp_timeout(pb);
+
+	if (pb->irq == PARPORT_IRQ_NONE)
+		pb->irq = irq_probe_SPP(pb);
+
+	if (pb->irq == PARPORT_IRQ_NONE)
+		pb->irq = get_superio_irq(pb);
+
+	return pb->irq;
+}
+
+/* --- DMA detection -------------------------------------- */
+
+/* Only if chipset conforms to ECP ISA Interface Standard */
+static int programmable_dma_support(struct parport *p)
+{
+	unsigned char oecr = inb(ECONTROL(p));
+	int dma;
+
+	frob_set_mode(p, ECR_CNF);
+
+	dma = inb(CONFIGB(p)) & 0x07;
+	/* 000: Indicates jumpered 8-bit DMA if read-only.
+	   100: Indicates jumpered 16-bit DMA if read-only. */
+	if ((dma & 0x03) == 0)
+		dma = PARPORT_DMA_NONE;
+
+	ECR_WRITE(p, oecr);
+	return dma;
+}
+
+static int parport_dma_probe(struct parport *p)
+{
+	const struct parport_pc_private *priv = p->private_data;
+	if (priv->ecr)		/* ask ECP chipset first */
+		p->dma = programmable_dma_support(p);
+	if (p->dma == PARPORT_DMA_NONE) {
+		/* ask known Super-IO chips proper, although these
+		   claim ECP compatible, some don't report their DMA
+		   conforming to ECP standards */
+		p->dma = get_superio_dma(p);
+	}
+
+	return p->dma;
+}
+
+/* --- Initialisation code -------------------------------- */
+
+static LIST_HEAD(ports_list);
+static DEFINE_SPINLOCK(ports_lock);
+
+struct parport *parport_pc_probe_port(unsigned long int base,
+				      unsigned long int base_hi,
+				      int irq, int dma,
+				      struct device *dev,
+				      int irqflags)
+{
+	struct parport_pc_private *priv;
+	struct parport_operations *ops;
+	struct parport *p;
+	int probedirq = PARPORT_IRQ_NONE;
+	struct resource *base_res;
+	struct resource	*ECR_res = NULL;
+	struct resource	*EPP_res = NULL;
+	struct platform_device *pdev = NULL;
+
+	if (!dev) {
+		/* We need a physical device to attach to, but none was
+		 * provided. Create our own. */
+		pdev = platform_device_register_simple("parport_pc",
+						       base, NULL, 0);
+		if (IS_ERR(pdev))
+			return NULL;
+		dev = &pdev->dev;
+
+		dev->coherent_dma_mask = DMA_BIT_MASK(24);
+		dev->dma_mask = &dev->coherent_dma_mask;
+	}
+
+	ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+	if (!ops)
+		goto out1;
+
+	priv = kmalloc(sizeof(struct parport_pc_private), GFP_KERNEL);
+	if (!priv)
+		goto out2;
+
+	/* a misnomer, actually - it's allocate and reserve parport number */
+	p = parport_register_port(base, irq, dma, ops);
+	if (!p)
+		goto out3;
+
+	base_res = request_region(base, 3, p->name);
+	if (!base_res)
+		goto out4;
+
+	memcpy(ops, &parport_pc_ops, sizeof(struct parport_operations));
+	priv->ctr = 0xc;
+	priv->ctr_writable = ~0x10;
+	priv->ecr = 0;
+	priv->fifo_depth = 0;
+	priv->dma_buf = NULL;
+	priv->dma_handle = 0;
+	INIT_LIST_HEAD(&priv->list);
+	priv->port = p;
+
+	p->dev = dev;
+	p->base_hi = base_hi;
+	p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+	p->private_data = priv;
+
+	if (base_hi) {
+		ECR_res = request_region(base_hi, 3, p->name);
+		if (ECR_res)
+			parport_ECR_present(p);
+	}
+
+	if (base != 0x3bc) {
+		EPP_res = request_region(base+0x3, 5, p->name);
+		if (EPP_res)
+			if (!parport_EPP_supported(p))
+				parport_ECPEPP_supported(p);
+	}
+	if (!parport_SPP_supported(p))
+		/* No port. */
+		goto out5;
+	if (priv->ecr)
+		parport_ECPPS2_supported(p);
+	else
+		parport_PS2_supported(p);
+
+	p->size = (p->modes & PARPORT_MODE_EPP) ? 8 : 3;
+
+	printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
+	if (p->base_hi && priv->ecr)
+		printk(" (0x%lx)", p->base_hi);
+	if (p->irq == PARPORT_IRQ_AUTO) {
+		p->irq = PARPORT_IRQ_NONE;
+		parport_irq_probe(p);
+	} else if (p->irq == PARPORT_IRQ_PROBEONLY) {
+		p->irq = PARPORT_IRQ_NONE;
+		parport_irq_probe(p);
+		probedirq = p->irq;
+		p->irq = PARPORT_IRQ_NONE;
+	}
+	if (p->irq != PARPORT_IRQ_NONE) {
+		printk(", irq %d", p->irq);
+		priv->ctr_writable |= 0x10;
+
+		if (p->dma == PARPORT_DMA_AUTO) {
+			p->dma = PARPORT_DMA_NONE;
+			parport_dma_probe(p);
+		}
+	}
+	if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
+					   is mandatory (see above) */
+		p->dma = PARPORT_DMA_NONE;
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+	if (parport_ECP_supported(p) &&
+	    p->dma != PARPORT_DMA_NOFIFO &&
+	    priv->fifo_depth > 0 && p->irq != PARPORT_IRQ_NONE) {
+		p->modes |= PARPORT_MODE_ECP | PARPORT_MODE_COMPAT;
+		p->ops->compat_write_data = parport_pc_compat_write_block_pio;
+#ifdef CONFIG_PARPORT_1284
+		p->ops->ecp_write_data = parport_pc_ecp_write_block_pio;
+		/* currently broken, but working on it.. (FB) */
+		/* p->ops->ecp_read_data = parport_pc_ecp_read_block_pio; */
+#endif /* IEEE 1284 support */
+		if (p->dma != PARPORT_DMA_NONE) {
+			printk(", dma %d", p->dma);
+			p->modes |= PARPORT_MODE_DMA;
+		} else
+			printk(", using FIFO");
+	} else
+		/* We can't use the DMA channel after all. */
+		p->dma = PARPORT_DMA_NONE;
+#endif /* Allowed to use FIFO/DMA */
+
+	printk(" [");
+
+#define printmode(x) \
+	{\
+		if (p->modes & PARPORT_MODE_##x) {\
+			printk("%s%s", f ? "," : "", #x);\
+			f++;\
+		} \
+	}
+
+	{
+		int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT)
+		printmode(EPP);
+		printmode(ECP);
+		printmode(DMA);
+	}
+#undef printmode
+#ifndef CONFIG_PARPORT_1284
+	printk("(,...)");
+#endif /* CONFIG_PARPORT_1284 */
+	printk("]\n");
+	if (probedirq != PARPORT_IRQ_NONE)
+		printk(KERN_INFO "%s: irq %d detected\n", p->name, probedirq);
+
+	/* If No ECP release the ports grabbed above. */
+	if (ECR_res && (p->modes & PARPORT_MODE_ECP) == 0) {
+		release_region(base_hi, 3);
+		ECR_res = NULL;
+	}
+	/* Likewise for EEP ports */
+	if (EPP_res && (p->modes & PARPORT_MODE_EPP) == 0) {
+		release_region(base+3, 5);
+		EPP_res = NULL;
+	}
+	if (p->irq != PARPORT_IRQ_NONE) {
+		if (request_irq(p->irq, parport_irq_handler,
+				 irqflags, p->name, p)) {
+			printk(KERN_WARNING "%s: irq %d in use, "
+				"resorting to polled operation\n",
+				p->name, p->irq);
+			p->irq = PARPORT_IRQ_NONE;
+			p->dma = PARPORT_DMA_NONE;
+		}
+
+#ifdef CONFIG_PARPORT_PC_FIFO
+#ifdef HAS_DMA
+		if (p->dma != PARPORT_DMA_NONE) {
+			if (request_dma(p->dma, p->name)) {
+				printk(KERN_WARNING "%s: dma %d in use, "
+					"resorting to PIO operation\n",
+					p->name, p->dma);
+				p->dma = PARPORT_DMA_NONE;
+			} else {
+				priv->dma_buf =
+				  dma_alloc_coherent(dev,
+						       PAGE_SIZE,
+						       &priv->dma_handle,
+						       GFP_KERNEL);
+				if (!priv->dma_buf) {
+					printk(KERN_WARNING "%s: "
+						"cannot get buffer for DMA, "
+						"resorting to PIO operation\n",
+						p->name);
+					free_dma(p->dma);
+					p->dma = PARPORT_DMA_NONE;
+				}
+			}
+		}
+#endif
+#endif
+	}
+
+	/* Done probing.  Now put the port into a sensible start-up state. */
+	if (priv->ecr)
+		/*
+		 * Put the ECP detected port in PS2 mode.
+		 * Do this also for ports that have ECR but don't do ECP.
+		 */
+		ECR_WRITE(p, 0x34);
+
+	parport_pc_write_data(p, 0);
+	parport_pc_data_forward(p);
+
+	/* Now that we've told the sharing engine about the port, and
+	   found out its characteristics, let the high-level drivers
+	   know about it. */
+	spin_lock(&ports_lock);
+	list_add(&priv->list, &ports_list);
+	spin_unlock(&ports_lock);
+	parport_announce_port(p);
+
+	return p;
+
+out5:
+	if (ECR_res)
+		release_region(base_hi, 3);
+	if (EPP_res)
+		release_region(base+0x3, 5);
+	release_region(base, 3);
+out4:
+	parport_put_port(p);
+out3:
+	kfree(priv);
+out2:
+	kfree(ops);
+out1:
+	if (pdev)
+		platform_device_unregister(pdev);
+	return NULL;
+}
+EXPORT_SYMBOL(parport_pc_probe_port);
+
+void parport_pc_unregister_port(struct parport *p)
+{
+	struct parport_pc_private *priv = p->private_data;
+	struct parport_operations *ops = p->ops;
+
+	parport_remove_port(p);
+	spin_lock(&ports_lock);
+	list_del_init(&priv->list);
+	spin_unlock(&ports_lock);
+#if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA)
+	if (p->dma != PARPORT_DMA_NONE)
+		free_dma(p->dma);
+#endif
+	if (p->irq != PARPORT_IRQ_NONE)
+		free_irq(p->irq, p);
+	release_region(p->base, 3);
+	if (p->size > 3)
+		release_region(p->base + 3, p->size - 3);
+	if (p->modes & PARPORT_MODE_ECP)
+		release_region(p->base_hi, 3);
+#if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA)
+	if (priv->dma_buf)
+		dma_free_coherent(p->physport->dev, PAGE_SIZE,
+				    priv->dma_buf,
+				    priv->dma_handle);
+#endif
+	kfree(p->private_data);
+	parport_put_port(p);
+	kfree(ops); /* hope no-one cached it */
+}
+EXPORT_SYMBOL(parport_pc_unregister_port);
+
+#ifdef CONFIG_PCI
+
+/* ITE support maintained by Rich Liu <richliu@poorman.org> */
+static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq,
+					 int autodma,
+					 const struct parport_pc_via_data *via)
+{
+	short inta_addr[6] = { 0x2A0, 0x2C0, 0x220, 0x240, 0x1E0 };
+	u32 ite8872set;
+	u32 ite8872_lpt, ite8872_lpthi;
+	u8 ite8872_irq, type;
+	int irq;
+	int i;
+
+	DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+
+	/* make sure which one chip */
+	for (i = 0; i < 5; i++) {
+		if (request_region(inta_addr[i], 32, "it887x")) {
+			int test;
+			pci_write_config_dword(pdev, 0x60,
+						0xe5000000 | inta_addr[i]);
+			pci_write_config_dword(pdev, 0x78,
+						0x00000000 | inta_addr[i]);
+			test = inb(inta_addr[i]);
+			if (test != 0xff)
+				break;
+			release_region(inta_addr[i], 32);
+		}
+	}
+	if (i >= 5) {
+		printk(KERN_INFO "parport_pc: cannot find ITE8872 INTA\n");
+		return 0;
+	}
+
+	type = inb(inta_addr[i] + 0x18);
+	type &= 0x0f;
+
+	switch (type) {
+	case 0x2:
+		printk(KERN_INFO "parport_pc: ITE8871 found (1P)\n");
+		ite8872set = 0x64200000;
+		break;
+	case 0xa:
+		printk(KERN_INFO "parport_pc: ITE8875 found (1P)\n");
+		ite8872set = 0x64200000;
+		break;
+	case 0xe:
+		printk(KERN_INFO "parport_pc: ITE8872 found (2S1P)\n");
+		ite8872set = 0x64e00000;
+		break;
+	case 0x6:
+		printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n");
+		release_region(inta_addr[i], 32);
+		return 0;
+	case 0x8:
+		printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n");
+		release_region(inta_addr[i], 32);
+		return 0;
+	default:
+		printk(KERN_INFO "parport_pc: unknown ITE887x\n");
+		printk(KERN_INFO "parport_pc: please mail 'lspci -nvv' "
+			"output to Rich.Liu@ite.com.tw\n");
+		release_region(inta_addr[i], 32);
+		return 0;
+	}
+
+	pci_read_config_byte(pdev, 0x3c, &ite8872_irq);
+	pci_read_config_dword(pdev, 0x1c, &ite8872_lpt);
+	ite8872_lpt &= 0x0000ff00;
+	pci_read_config_dword(pdev, 0x20, &ite8872_lpthi);
+	ite8872_lpthi &= 0x0000ff00;
+	pci_write_config_dword(pdev, 0x6c, 0xe3000000 | ite8872_lpt);
+	pci_write_config_dword(pdev, 0x70, 0xe3000000 | ite8872_lpthi);
+	pci_write_config_dword(pdev, 0x80, (ite8872_lpthi<<16) | ite8872_lpt);
+	/* SET SPP&EPP , Parallel Port NO DMA , Enable All Function */
+	/* SET Parallel IRQ */
+	pci_write_config_dword(pdev, 0x9c,
+				ite8872set | (ite8872_irq * 0x11111));
+
+	DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
+	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
+		 ite8872_lpt);
+	DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
+		 ite8872_lpthi);
+
+	/* Let the user (or defaults) steer us away from interrupts */
+	irq = ite8872_irq;
+	if (autoirq != PARPORT_IRQ_AUTO)
+		irq = PARPORT_IRQ_NONE;
+
+	/*
+	 * Release the resource so that parport_pc_probe_port can get it.
+	 */
+	release_region(inta_addr[i], 32);
+	if (parport_pc_probe_port(ite8872_lpt, ite8872_lpthi,
+				   irq, PARPORT_DMA_NONE, &pdev->dev, 0)) {
+		printk(KERN_INFO
+			"parport_pc: ITE 8872 parallel port: io=0x%X",
+								ite8872_lpt);
+		if (irq != PARPORT_IRQ_NONE)
+			printk(", irq=%d", irq);
+		printk("\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+/* VIA 8231 support by Pavel Fedin <sonic_amiga@rambler.ru>
+   based on VIA 686a support code by Jeff Garzik <jgarzik@pobox.com> */
+static int __devinitdata parport_init_mode;
+
+/* Data for two known VIA chips */
+static struct parport_pc_via_data via_686a_data __devinitdata = {
+	0x51,
+	0x50,
+	0x85,
+	0x02,
+	0xE2,
+	0xF0,
+	0xE6
+};
+static struct parport_pc_via_data via_8231_data __devinitdata = {
+	0x45,
+	0x44,
+	0x50,
+	0x04,
+	0xF2,
+	0xFA,
+	0xF6
+};
+
+static int __devinit sio_via_probe(struct pci_dev *pdev, int autoirq,
+				    int autodma,
+				    const struct parport_pc_via_data *via)
+{
+	u8 tmp, tmp2, siofunc;
+	u8 ppcontrol = 0;
+	int dma, irq;
+	unsigned port1, port2;
+	unsigned have_epp = 0;
+
+	printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
+
+	switch (parport_init_mode) {
+	case 1:
+		printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_SPP;
+		break;
+	case 2:
+		printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_SPP;
+		ppcontrol = VIA_PARPORT_BIDIR;
+		break;
+	case 3:
+		printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_EPP;
+		ppcontrol = VIA_PARPORT_BIDIR;
+		have_epp = 1;
+		break;
+	case 4:
+		printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_ECP;
+		ppcontrol = VIA_PARPORT_BIDIR;
+		break;
+	case 5:
+		printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
+		siofunc = VIA_FUNCTION_PARPORT_ECP;
+		ppcontrol = VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP;
+		have_epp = 1;
+		break;
+	default:
+		printk(KERN_DEBUG
+			"parport_pc: probing current configuration\n");
+		siofunc = VIA_FUNCTION_PROBE;
+		break;
+	}
+	/*
+	 * unlock super i/o configuration
+	 */
+	pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+	tmp |= via->via_pci_superio_config_data;
+	pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+	/* Bits 1-0: Parallel Port Mode / Enable */
+	outb(via->viacfg_function, VIA_CONFIG_INDEX);
+	tmp = inb(VIA_CONFIG_DATA);
+	/* Bit 5: EPP+ECP enable; bit 7: PS/2 bidirectional port enable */
+	outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+	tmp2 = inb(VIA_CONFIG_DATA);
+	if (siofunc == VIA_FUNCTION_PROBE) {
+		siofunc = tmp & VIA_FUNCTION_PARPORT_DISABLE;
+		ppcontrol = tmp2;
+	} else {
+		tmp &= ~VIA_FUNCTION_PARPORT_DISABLE;
+		tmp |= siofunc;
+		outb(via->viacfg_function, VIA_CONFIG_INDEX);
+		outb(tmp, VIA_CONFIG_DATA);
+		tmp2 &= ~(VIA_PARPORT_BIDIR|VIA_PARPORT_ECPEPP);
+		tmp2 |= ppcontrol;
+		outb(via->viacfg_parport_control, VIA_CONFIG_INDEX);
+		outb(tmp2, VIA_CONFIG_DATA);
+	}
+
+	/* Parallel Port I/O Base Address, bits 9-2 */
+	outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+	port1 = inb(VIA_CONFIG_DATA) << 2;
+
+	printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
+									port1);
+	if (port1 == 0x3BC && have_epp) {
+		outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
+		outb((0x378 >> 2), VIA_CONFIG_DATA);
+		printk(KERN_DEBUG
+			"parport_pc: Parallel port base changed to 0x378\n");
+		port1 = 0x378;
+	}
+
+	/*
+	 * lock super i/o configuration
+	 */
+	pci_read_config_byte(pdev, via->via_pci_superio_config_reg, &tmp);
+	tmp &= ~via->via_pci_superio_config_data;
+	pci_write_config_byte(pdev, via->via_pci_superio_config_reg, tmp);
+
+	if (siofunc == VIA_FUNCTION_PARPORT_DISABLE) {
+		printk(KERN_INFO "parport_pc: VIA parallel port disabled in BIOS\n");
+		return 0;
+	}
+
+	/* Bits 7-4: PnP Routing for Parallel Port IRQ */
+	pci_read_config_byte(pdev, via->via_pci_parport_irq_reg, &tmp);
+	irq = ((tmp & VIA_IRQCONTROL_PARALLEL) >> 4);
+
+	if (siofunc == VIA_FUNCTION_PARPORT_ECP) {
+		/* Bits 3-2: PnP Routing for Parallel Port DMA */
+		pci_read_config_byte(pdev, via->via_pci_parport_dma_reg, &tmp);
+		dma = ((tmp & VIA_DMACONTROL_PARALLEL) >> 2);
+	} else
+		/* if ECP not enabled, DMA is not enabled, assumed
+		   bogus 'dma' value */
+		dma = PARPORT_DMA_NONE;
+
+	/* Let the user (or defaults) steer us away from interrupts and DMA */
+	if (autoirq == PARPORT_IRQ_NONE) {
+		irq = PARPORT_IRQ_NONE;
+		dma = PARPORT_DMA_NONE;
+	}
+	if (autodma == PARPORT_DMA_NONE)
+		dma = PARPORT_DMA_NONE;
+
+	switch (port1) {
+	case 0x3bc:
+		port2 = 0x7bc; break;
+	case 0x378:
+		port2 = 0x778; break;
+	case 0x278:
+		port2 = 0x678; break;
+	default:
+		printk(KERN_INFO
+			"parport_pc: Weird VIA parport base 0x%X, ignoring\n",
+									port1);
+		return 0;
+	}
+
+	/* filter bogus IRQs */
+	switch (irq) {
+	case 0:
+	case 2:
+	case 8:
+	case 13:
+		irq = PARPORT_IRQ_NONE;
+		break;
+
+	default: /* do nothing */
+		break;
+	}
+
+	/* finally, do the probe with values obtained */
+	if (parport_pc_probe_port(port1, port2, irq, dma, &pdev->dev, 0)) {
+		printk(KERN_INFO
+			"parport_pc: VIA parallel port: io=0x%X", port1);
+		if (irq != PARPORT_IRQ_NONE)
+			printk(", irq=%d", irq);
+		if (dma != PARPORT_DMA_NONE)
+			printk(", dma=%d", dma);
+		printk("\n");
+		return 1;
+	}
+
+	printk(KERN_WARNING "parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",
+		port1, irq, dma);
+	return 0;
+}
+
+
+enum parport_pc_sio_types {
+	sio_via_686a = 0,   /* Via VT82C686A motherboard Super I/O */
+	sio_via_8231,	    /* Via VT8231 south bridge integrated Super IO */
+	sio_ite_8872,
+	last_sio
+};
+
+/* each element directly indexed from enum list, above */
+static struct parport_pc_superio {
+	int (*probe) (struct pci_dev *pdev, int autoirq, int autodma,
+		      const struct parport_pc_via_data *via);
+	const struct parport_pc_via_data *via;
+} parport_pc_superio_info[] __devinitdata = {
+	{ sio_via_probe, &via_686a_data, },
+	{ sio_via_probe, &via_8231_data, },
+	{ sio_ite_8872_probe, NULL, },
+};
+
+enum parport_pc_pci_cards {
+	siig_1p_10x = last_sio,
+	siig_2p_10x,
+	siig_1p_20x,
+	siig_2p_20x,
+	lava_parallel,
+	lava_parallel_dual_a,
+	lava_parallel_dual_b,
+	boca_ioppar,
+	plx_9050,
+	timedia_4006a,
+	timedia_4014,
+	timedia_4008a,
+	timedia_4018,
+	timedia_9018a,
+	syba_2p_epp,
+	syba_1p_ecp,
+	titan_010l,
+	titan_1284p1,
+	titan_1284p2,
+	avlab_1p,
+	avlab_2p,
+	oxsemi_952,
+	oxsemi_954,
+	oxsemi_840,
+	oxsemi_pcie_pport,
+	aks_0100,
+	mobility_pp,
+	netmos_9705,
+	netmos_9715,
+	netmos_9755,
+	netmos_9805,
+	netmos_9815,
+	netmos_9901,
+	netmos_9865,
+	quatech_sppxp100,
+};
+
+
+/* each element directly indexed from enum list, above
+ * (but offset by last_sio) */
+static struct parport_pc_pci {
+	int numports;
+	struct { /* BAR (base address registers) numbers in the config
+		    space header */
+		int lo;
+		int hi;
+		/* -1 if not there, >6 for offset-method (max BAR is 6) */
+	} addr[4];
+
+	/* If set, this is called immediately after pci_enable_device.
+	 * If it returns non-zero, no probing will take place and the
+	 * ports will not be used. */
+	int (*preinit_hook) (struct pci_dev *pdev, int autoirq, int autodma);
+
+	/* If set, this is called after probing for ports.  If 'failed'
+	 * is non-zero we couldn't use any of the ports. */
+	void (*postinit_hook) (struct pci_dev *pdev, int failed);
+} cards[] = {
+	/* siig_1p_10x */		{ 1, { { 2, 3 }, } },
+	/* siig_2p_10x */		{ 2, { { 2, 3 }, { 4, 5 }, } },
+	/* siig_1p_20x */		{ 1, { { 0, 1 }, } },
+	/* siig_2p_20x */		{ 2, { { 0, 1 }, { 2, 3 }, } },
+	/* lava_parallel */		{ 1, { { 0, -1 }, } },
+	/* lava_parallel_dual_a */	{ 1, { { 0, -1 }, } },
+	/* lava_parallel_dual_b */	{ 1, { { 0, -1 }, } },
+	/* boca_ioppar */		{ 1, { { 0, -1 }, } },
+	/* plx_9050 */			{ 2, { { 4, -1 }, { 5, -1 }, } },
+	/* timedia_4006a */             { 1, { { 0, -1 }, } },
+	/* timedia_4014  */             { 2, { { 0, -1 }, { 2, -1 }, } },
+	/* timedia_4008a */             { 1, { { 0, 1 }, } },
+	/* timedia_4018  */             { 2, { { 0, 1 }, { 2, 3 }, } },
+	/* timedia_9018a */             { 2, { { 0, 1 }, { 2, 3 }, } },
+					/* SYBA uses fixed offsets in
+					   a 1K io window */
+	/* syba_2p_epp AP138B */	{ 2, { { 0, 0x078 }, { 0, 0x178 }, } },
+	/* syba_1p_ecp W83787 */	{ 1, { { 0, 0x078 }, } },
+	/* titan_010l */		{ 1, { { 3, -1 }, } },
+	/* titan_1284p1 */              { 1, { { 0, 1 }, } },
+	/* titan_1284p2 */		{ 2, { { 0, 1 }, { 2, 3 }, } },
+	/* avlab_1p		*/	{ 1, { { 0, 1}, } },
+	/* avlab_2p		*/	{ 2, { { 0, 1}, { 2, 3 },} },
+	/* The Oxford Semi cards are unusual: 954 doesn't support ECP,
+	 * and 840 locks up if you write 1 to bit 2! */
+	/* oxsemi_952 */		{ 1, { { 0, 1 }, } },
+	/* oxsemi_954 */		{ 1, { { 0, -1 }, } },
+	/* oxsemi_840 */		{ 1, { { 0, 1 }, } },
+	/* oxsemi_pcie_pport */		{ 1, { { 0, 1 }, } },
+	/* aks_0100 */                  { 1, { { 0, -1 }, } },
+	/* mobility_pp */		{ 1, { { 0, 1 }, } },
+
+	/* The netmos entries below are untested */
+	/* netmos_9705 */               { 1, { { 0, -1 }, } },
+	/* netmos_9715 */               { 2, { { 0, 1 }, { 2, 3 },} },
+	/* netmos_9755 */               { 2, { { 0, 1 }, { 2, 3 },} },
+	/* netmos_9805 */               { 1, { { 0, -1 }, } },
+	/* netmos_9815 */               { 2, { { 0, -1 }, { 2, -1 }, } },
+	/* netmos_9901 */               { 1, { { 0, -1 }, } },
+	/* netmos_9865 */               { 1, { { 0, -1 }, } },
+	/* quatech_sppxp100 */		{ 1, { { 0, 1 }, } },
+};
+
+static const struct pci_device_id parport_pc_pci_tbl[] = {
+	/* Super-IO onboard chips */
+	{ 0x1106, 0x0686, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_686a },
+	{ 0x1106, 0x8231, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_via_8231 },
+	{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, sio_ite_8872 },
+
+	/* PCI cards */
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_10x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_10x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1P_20x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P_20x,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p_20x },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PARALLEL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_A,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_a },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DUAL_PAR_B,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, lava_parallel_dual_b },
+	{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_BOCA_IOPPAR,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, boca_ioppar },
+	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+	  PCI_SUBVENDOR_ID_EXSYS, PCI_SUBDEVICE_ID_EXSYS_4014, 0, 0, plx_9050 },
+	/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
+	{ 0x1409, 0x7268, 0x1409, 0x0101, 0, 0, timedia_4006a },
+	{ 0x1409, 0x7268, 0x1409, 0x0102, 0, 0, timedia_4014 },
+	{ 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a },
+	{ 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 },
+	{ 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a },
+	{ PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp },
+	{ PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_1p_ecp },
+	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_010L,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_010l },
+	{ 0x9710, 0x9805, 0x1000, 0x0010, 0, 0, titan_1284p1 },
+	{ 0x9710, 0x9815, 0x1000, 0x0020, 0, 0, titan_1284p2 },
+	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
+	/* AFAVLAB_TK9902 */
+	{ 0x14db, 0x2120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1p},
+	{ 0x14db, 0x2121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2p},
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952PP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_952 },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954PP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840_G,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0_G,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_G,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_U,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport },
+	{ PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
+	{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
+	/* NetMos communication controllers */
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9715 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9755,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9755 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9805,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9805 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9815,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
+	  0xA000, 0x2000, 0, 0, netmos_9901 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+	  0xA000, 0x1000, 0, 0, netmos_9865 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+	  0xA000, 0x2000, 0, 0, netmos_9865 },
+	/* Quatech SPPXP-100 Parallel port PCI ExpressCard */
+	{ PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 },
+	{ 0, } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);
+
+struct pci_parport_data {
+	int num;
+	struct parport *ports[2];
+};
+
+static int parport_pc_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *id)
+{
+	int err, count, n, i = id->driver_data;
+	struct pci_parport_data *data;
+
+	if (i < last_sio)
+		/* This is an onboard Super-IO and has already been probed */
+		return 0;
+
+	/* This is a PCI card */
+	i -= last_sio;
+	count = 0;
+	err = pci_enable_device(dev);
+	if (err)
+		return err;
+
+	data = kmalloc(sizeof(struct pci_parport_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (cards[i].preinit_hook &&
+	    cards[i].preinit_hook(dev, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) {
+		kfree(data);
+		return -ENODEV;
+	}
+
+	for (n = 0; n < cards[i].numports; n++) {
+		int lo = cards[i].addr[n].lo;
+		int hi = cards[i].addr[n].hi;
+		int irq;
+		unsigned long io_lo, io_hi;
+		io_lo = pci_resource_start(dev, lo);
+		io_hi = 0;
+		if ((hi >= 0) && (hi <= 6))
+			io_hi = pci_resource_start(dev, hi);
+		else if (hi > 6)
+			io_lo += hi; /* Reinterpret the meaning of
+					"hi" as an offset (see SYBA
+					def.) */
+		/* TODO: test if sharing interrupts works */
+		irq = dev->irq;
+		if (irq == IRQ_NONE) {
+			printk(KERN_DEBUG
+	"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
+				parport_pc_pci_tbl[i + last_sio].vendor,
+				parport_pc_pci_tbl[i + last_sio].device,
+				io_lo, io_hi);
+			irq = PARPORT_IRQ_NONE;
+		} else {
+			printk(KERN_DEBUG
+	"PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
+				parport_pc_pci_tbl[i + last_sio].vendor,
+				parport_pc_pci_tbl[i + last_sio].device,
+				io_lo, io_hi, irq);
+		}
+		data->ports[count] =
+			parport_pc_probe_port(io_lo, io_hi, irq,
+					       PARPORT_DMA_NONE, &dev->dev,
+					       IRQF_SHARED);
+		if (data->ports[count])
+			count++;
+	}
+
+	data->num = count;
+
+	if (cards[i].postinit_hook)
+		cards[i].postinit_hook(dev, count == 0);
+
+	if (count) {
+		pci_set_drvdata(dev, data);
+		return 0;
+	}
+
+	kfree(data);
+
+	return -ENODEV;
+}
+
+static void __devexit parport_pc_pci_remove(struct pci_dev *dev)
+{
+	struct pci_parport_data *data = pci_get_drvdata(dev);
+	int i;
+
+	pci_set_drvdata(dev, NULL);
+
+	if (data) {
+		for (i = data->num - 1; i >= 0; i--)
+			parport_pc_unregister_port(data->ports[i]);
+
+		kfree(data);
+	}
+}
+
+static struct pci_driver parport_pc_pci_driver = {
+	.name		= "parport_pc",
+	.id_table	= parport_pc_pci_tbl,
+	.probe		= parport_pc_pci_probe,
+	.remove		= __devexit_p(parport_pc_pci_remove),
+};
+
+static int __init parport_pc_init_superio(int autoirq, int autodma)
+{
+	const struct pci_device_id *id;
+	struct pci_dev *pdev = NULL;
+	int ret = 0;
+
+	for_each_pci_dev(pdev) {
+		id = pci_match_id(parport_pc_pci_tbl, pdev);
+		if (id == NULL || id->driver_data >= last_sio)
+			continue;
+
+		if (parport_pc_superio_info[id->driver_data].probe(
+			pdev, autoirq, autodma,
+			parport_pc_superio_info[id->driver_data].via)) {
+			ret++;
+		}
+	}
+
+	return ret; /* number of devices found */
+}
+#else
+static struct pci_driver parport_pc_pci_driver;
+static int __init parport_pc_init_superio(int autoirq, int autodma)
+{
+	return 0;
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PNP
+
+static const struct pnp_device_id parport_pc_pnp_tbl[] = {
+	/* Standard LPT Printer Port */
+	{.id = "PNP0400", .driver_data = 0},
+	/* ECP Printer Port */
+	{.id = "PNP0401", .driver_data = 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pnp, parport_pc_pnp_tbl);
+
+static int parport_pc_pnp_probe(struct pnp_dev *dev,
+						const struct pnp_device_id *id)
+{
+	struct parport *pdata;
+	unsigned long io_lo, io_hi;
+	int dma, irq;
+
+	if (pnp_port_valid(dev, 0) &&
+		!(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		io_lo = pnp_port_start(dev, 0);
+	} else
+		return -EINVAL;
+
+	if (pnp_port_valid(dev, 1) &&
+		!(pnp_port_flags(dev, 1) & IORESOURCE_DISABLED)) {
+		io_hi = pnp_port_start(dev, 1);
+	} else
+		io_hi = 0;
+
+	if (pnp_irq_valid(dev, 0) &&
+		!(pnp_irq_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		irq = pnp_irq(dev, 0);
+	} else
+		irq = PARPORT_IRQ_NONE;
+
+	if (pnp_dma_valid(dev, 0) &&
+		!(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED)) {
+		dma = pnp_dma(dev, 0);
+	} else
+		dma = PARPORT_DMA_NONE;
+
+	dev_info(&dev->dev, "reported by %s\n", dev->protocol->name);
+	pdata = parport_pc_probe_port(io_lo, io_hi, irq, dma, &dev->dev, 0);
+	if (pdata == NULL)
+		return -ENODEV;
+
+	pnp_set_drvdata(dev, pdata);
+	return 0;
+}
+
+static void parport_pc_pnp_remove(struct pnp_dev *dev)
+{
+	struct parport *pdata = (struct parport *)pnp_get_drvdata(dev);
+	if (!pdata)
+		return;
+
+	parport_pc_unregister_port(pdata);
+}
+
+/* we only need the pnp layer to activate the device, at least for now */
+static struct pnp_driver parport_pc_pnp_driver = {
+	.name		= "parport_pc",
+	.id_table	= parport_pc_pnp_tbl,
+	.probe		= parport_pc_pnp_probe,
+	.remove		= parport_pc_pnp_remove,
+};
+
+#else
+static struct pnp_driver parport_pc_pnp_driver;
+#endif /* CONFIG_PNP */
+
+static int __devinit parport_pc_platform_probe(struct platform_device *pdev)
+{
+	/* Always succeed, the actual probing is done in
+	 * parport_pc_probe_port(). */
+	return 0;
+}
+
+static struct platform_driver parport_pc_platform_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "parport_pc",
+	},
+	.probe		= parport_pc_platform_probe,
+};
+
+/* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
+static int __devinit __attribute__((unused))
+parport_pc_find_isa_ports(int autoirq, int autodma)
+{
+	int count = 0;
+
+	if (parport_pc_probe_port(0x3bc, 0x7bc, autoirq, autodma, NULL, 0))
+		count++;
+	if (parport_pc_probe_port(0x378, 0x778, autoirq, autodma, NULL, 0))
+		count++;
+	if (parport_pc_probe_port(0x278, 0x678, autoirq, autodma, NULL, 0))
+		count++;
+
+	return count;
+}
+
+/* This function is called by parport_pc_init if the user didn't
+ * specify any ports to probe.  Its job is to find some ports.  Order
+ * is important here -- we want ISA ports to be registered first,
+ * followed by PCI cards (for least surprise), but before that we want
+ * to do chipset-specific tests for some onboard ports that we know
+ * about.
+ *
+ * autoirq is PARPORT_IRQ_NONE, PARPORT_IRQ_AUTO, or PARPORT_IRQ_PROBEONLY
+ * autodma is PARPORT_DMA_NONE or PARPORT_DMA_AUTO
+ */
+static void __init parport_pc_find_ports(int autoirq, int autodma)
+{
+	int count = 0, err;
+
+#ifdef CONFIG_PARPORT_PC_SUPERIO
+	detect_and_report_it87();
+	detect_and_report_winbond();
+	detect_and_report_smsc();
+#endif
+
+	/* Onboard SuperIO chipsets that show themselves on the PCI bus. */
+	count += parport_pc_init_superio(autoirq, autodma);
+
+	/* PnP ports, skip detection if SuperIO already found them */
+	if (!count) {
+		err = pnp_register_driver(&parport_pc_pnp_driver);
+		if (!err)
+			pnp_registered_parport = 1;
+	}
+
+	/* ISA ports and whatever (see asm/parport.h). */
+	parport_pc_find_nonpci_ports(autoirq, autodma);
+
+	err = pci_register_driver(&parport_pc_pci_driver);
+	if (!err)
+		pci_registered_parport = 1;
+}
+
+/*
+ *	Piles of crap below pretend to be a parser for module and kernel
+ *	parameters.  Say "thank you" to whoever had come up with that
+ *	syntax and keep in mind that code below is a cleaned up version.
+ */
+
+static int __initdata io[PARPORT_PC_MAX_PORTS+1] = {
+	[0 ... PARPORT_PC_MAX_PORTS] = 0
+};
+static int __initdata io_hi[PARPORT_PC_MAX_PORTS+1] = {
+	[0 ... PARPORT_PC_MAX_PORTS] = PARPORT_IOHI_AUTO
+};
+static int __initdata dmaval[PARPORT_PC_MAX_PORTS] = {
+	[0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_DMA_NONE
+};
+static int __initdata irqval[PARPORT_PC_MAX_PORTS] = {
+	[0 ... PARPORT_PC_MAX_PORTS-1] = PARPORT_IRQ_PROBEONLY
+};
+
+static int __init parport_parse_param(const char *s, int *val,
+				int automatic, int none, int nofifo)
+{
+	if (!s)
+		return 0;
+	if (!strncmp(s, "auto", 4))
+		*val = automatic;
+	else if (!strncmp(s, "none", 4))
+		*val = none;
+	else if (nofifo && !strncmp(s, "nofifo", 6))
+		*val = nofifo;
+	else {
+		char *ep;
+		unsigned long r = simple_strtoul(s, &ep, 0);
+		if (ep != s)
+			*val = r;
+		else {
+			printk(KERN_ERR "parport: bad specifier `%s'\n", s);
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int __init parport_parse_irq(const char *irqstr, int *val)
+{
+	return parport_parse_param(irqstr, val, PARPORT_IRQ_AUTO,
+				     PARPORT_IRQ_NONE, 0);
+}
+
+static int __init parport_parse_dma(const char *dmastr, int *val)
+{
+	return parport_parse_param(dmastr, val, PARPORT_DMA_AUTO,
+				     PARPORT_DMA_NONE, PARPORT_DMA_NOFIFO);
+}
+
+#ifdef CONFIG_PCI
+static int __init parport_init_mode_setup(char *str)
+{
+	printk(KERN_DEBUG
+	     "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+
+	if (!strcmp(str, "spp"))
+		parport_init_mode = 1;
+	if (!strcmp(str, "ps2"))
+		parport_init_mode = 2;
+	if (!strcmp(str, "epp"))
+		parport_init_mode = 3;
+	if (!strcmp(str, "ecp"))
+		parport_init_mode = 4;
+	if (!strcmp(str, "ecpepp"))
+		parport_init_mode = 5;
+	return 1;
+}
+#endif
+
+#ifdef MODULE
+static char *irq[PARPORT_PC_MAX_PORTS];
+static char *dma[PARPORT_PC_MAX_PORTS];
+
+MODULE_PARM_DESC(io, "Base I/O address (SPP regs)");
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)");
+module_param_array(io_hi, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ line");
+module_param_array(irq, charp, NULL, 0);
+MODULE_PARM_DESC(dma, "DMA channel");
+module_param_array(dma, charp, NULL, 0);
+#if defined(CONFIG_PARPORT_PC_SUPERIO) || \
+       (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO))
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation");
+module_param(verbose_probing, int, 0644);
+#endif
+#ifdef CONFIG_PCI
+static char *init_mode;
+MODULE_PARM_DESC(init_mode,
+	"Initialise mode for VIA VT8231 port (spp, ps2, epp, ecp or ecpepp)");
+module_param(init_mode, charp, 0);
+#endif
+
+static int __init parse_parport_params(void)
+{
+	unsigned int i;
+	int val;
+
+#ifdef CONFIG_PCI
+	if (init_mode)
+		parport_init_mode_setup(init_mode);
+#endif
+
+	for (i = 0; i < PARPORT_PC_MAX_PORTS && io[i]; i++) {
+		if (parport_parse_irq(irq[i], &val))
+			return 1;
+		irqval[i] = val;
+		if (parport_parse_dma(dma[i], &val))
+			return 1;
+		dmaval[i] = val;
+	}
+	if (!io[0]) {
+		/* The user can make us use any IRQs or DMAs we find. */
+		if (irq[0] && !parport_parse_irq(irq[0], &val))
+			switch (val) {
+			case PARPORT_IRQ_NONE:
+			case PARPORT_IRQ_AUTO:
+				irqval[0] = val;
+				break;
+			default:
+				printk(KERN_WARNING
+					"parport_pc: irq specified "
+					"without base address.  Use 'io=' "
+					"to specify one\n");
+			}
+
+		if (dma[0] && !parport_parse_dma(dma[0], &val))
+			switch (val) {
+			case PARPORT_DMA_NONE:
+			case PARPORT_DMA_AUTO:
+				dmaval[0] = val;
+				break;
+			default:
+				printk(KERN_WARNING
+					"parport_pc: dma specified "
+					"without base address.  Use 'io=' "
+					"to specify one\n");
+			}
+	}
+	return 0;
+}
+
+#else
+
+static int parport_setup_ptr __initdata;
+
+/*
+ * Acceptable parameters:
+ *
+ * parport=0
+ * parport=auto
+ * parport=0xBASE[,IRQ[,DMA]]
+ *
+ * IRQ/DMA may be numeric or 'auto' or 'none'
+ */
+static int __init parport_setup(char *str)
+{
+	char *endptr;
+	char *sep;
+	int val;
+
+	if (!str || !*str || (*str == '0' && !*(str+1))) {
+		/* Disable parport if "parport=0" in cmdline */
+		io[0] = PARPORT_DISABLE;
+		return 1;
+	}
+
+	if (!strncmp(str, "auto", 4)) {
+		irqval[0] = PARPORT_IRQ_AUTO;
+		dmaval[0] = PARPORT_DMA_AUTO;
+		return 1;
+	}
+
+	val = simple_strtoul(str, &endptr, 0);
+	if (endptr == str) {
+		printk(KERN_WARNING "parport=%s not understood\n", str);
+		return 1;
+	}
+
+	if (parport_setup_ptr == PARPORT_PC_MAX_PORTS) {
+		printk(KERN_ERR "parport=%s ignored, too many ports\n", str);
+		return 1;
+	}
+
+	io[parport_setup_ptr] = val;
+	irqval[parport_setup_ptr] = PARPORT_IRQ_NONE;
+	dmaval[parport_setup_ptr] = PARPORT_DMA_NONE;
+
+	sep = strchr(str, ',');
+	if (sep++) {
+		if (parport_parse_irq(sep, &val))
+			return 1;
+		irqval[parport_setup_ptr] = val;
+		sep = strchr(sep, ',');
+		if (sep++) {
+			if (parport_parse_dma(sep, &val))
+				return 1;
+			dmaval[parport_setup_ptr] = val;
+		}
+	}
+	parport_setup_ptr++;
+	return 1;
+}
+
+static int __init parse_parport_params(void)
+{
+	return io[0] == PARPORT_DISABLE;
+}
+
+__setup("parport=", parport_setup);
+
+/*
+ * Acceptable parameters:
+ *
+ * parport_init_mode=[spp|ps2|epp|ecp|ecpepp]
+ */
+#ifdef CONFIG_PCI
+__setup("parport_init_mode=", parport_init_mode_setup);
+#endif
+#endif
+
+/* "Parser" ends here */
+
+static int __init parport_pc_init(void)
+{
+	int err;
+
+	if (parse_parport_params())
+		return -EINVAL;
+
+	err = platform_driver_register(&parport_pc_platform_driver);
+	if (err)
+		return err;
+
+	if (io[0]) {
+		int i;
+		/* Only probe the ports we were given. */
+		user_specified = 1;
+		for (i = 0; i < PARPORT_PC_MAX_PORTS; i++) {
+			if (!io[i])
+				break;
+			if (io_hi[i] == PARPORT_IOHI_AUTO)
+				io_hi[i] = 0x400 + io[i];
+			parport_pc_probe_port(io[i], io_hi[i],
+					irqval[i], dmaval[i], NULL, 0);
+		}
+	} else
+		parport_pc_find_ports(irqval[0], dmaval[0]);
+
+	return 0;
+}
+
+static void __exit parport_pc_exit(void)
+{
+	if (pci_registered_parport)
+		pci_unregister_driver(&parport_pc_pci_driver);
+	if (pnp_registered_parport)
+		pnp_unregister_driver(&parport_pc_pnp_driver);
+	platform_driver_unregister(&parport_pc_platform_driver);
+
+	while (!list_empty(&ports_list)) {
+		struct parport_pc_private *priv;
+		struct parport *port;
+		priv = list_entry(ports_list.next,
+				  struct parport_pc_private, list);
+		port = priv->port;
+		if (port->dev && port->dev->bus == &platform_bus_type)
+			platform_device_unregister(
+				to_platform_device(port->dev));
+		parport_pc_unregister_port(port);
+	}
+}
+
+MODULE_AUTHOR("Phil Blundell, Tim Waugh, others");
+MODULE_DESCRIPTION("PC-style parallel port driver");
+MODULE_LICENSE("GPL");
+module_init(parport_pc_init)
+module_exit(parport_pc_exit)
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
new file mode 100644
index 00000000..e9c32274
--- /dev/null
+++ b/drivers/parport/parport_serial.c
@@ -0,0 +1,682 @@
+/*
+ * Support for common PCI multi-I/O cards (which is most of them)
+ *
+ * Copyright (C) 2001  Tim Waugh <twaugh@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ *
+ * Multi-function PCI cards are supposed to present separate logical
+ * devices on the bus.  A common thing to do seems to be to just use
+ * one logical device with lots of base address registers for both
+ * parallel ports and serial ports.  This driver is for dealing with
+ * that.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/parport.h>
+#include <linux/parport_pc.h>
+#include <linux/8250_pci.h>
+
+enum parport_pc_pci_cards {
+	titan_110l = 0,
+	titan_210l,
+	netmos_9xx5_combo,
+	netmos_9855,
+	netmos_9855_2p,
+	netmos_9900,
+	netmos_9900_2p,
+	netmos_99xx_1p,
+	avlab_1s1p,
+	avlab_1s2p,
+	avlab_2s1p,
+	siig_1s1p_10x,
+	siig_2s1p_10x,
+	siig_2p1s_20x,
+	siig_1s1p_20x,
+	siig_2s1p_20x,
+	timedia_4078a,
+	timedia_4079h,
+	timedia_4085h,
+	timedia_4088a,
+	timedia_4089a,
+	timedia_4095a,
+	timedia_4096a,
+	timedia_4078u,
+	timedia_4079a,
+	timedia_4085u,
+	timedia_4079r,
+	timedia_4079s,
+	timedia_4079d,
+	timedia_4079e,
+	timedia_4079f,
+	timedia_9079a,
+	timedia_9079b,
+	timedia_9079c,
+};
+
+/* each element directly indexed from enum list, above */
+struct parport_pc_pci {
+	int numports;
+	struct { /* BAR (base address registers) numbers in the config
+                    space header */
+		int lo;
+		int hi; /* -1 if not there, >6 for offset-method (max
+                           BAR is 6) */
+	} addr[4];
+
+	/* If set, this is called immediately after pci_enable_device.
+	 * If it returns non-zero, no probing will take place and the
+	 * ports will not be used. */
+	int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card,
+				int autoirq, int autodma);
+
+	/* If set, this is called after probing for ports.  If 'failed'
+	 * is non-zero we couldn't use any of the ports. */
+	void (*postinit_hook) (struct pci_dev *pdev,
+				struct parport_pc_pci *card, int failed);
+};
+
+static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma)
+{
+	/* the rule described below doesn't hold for this device */
+	if (dev->device == PCI_DEVICE_ID_NETMOS_9835 &&
+			dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+			dev->subsystem_device == 0x0299)
+		return -ENODEV;
+
+	if (dev->device == PCI_DEVICE_ID_NETMOS_9912) {
+		par->numports = 1;
+	} else {
+		/*
+		 * Netmos uses the subdevice ID to indicate the number of parallel
+		 * and serial ports.  The form is 0x00PS, where <P> is the number of
+		 * parallel ports and <S> is the number of serial ports.
+		 */
+		par->numports = (dev->subsystem_device & 0xf0) >> 4;
+		if (par->numports > ARRAY_SIZE(par->addr))
+			par->numports = ARRAY_SIZE(par->addr);
+	}
+
+	return 0;
+}
+
+static struct parport_pc_pci cards[] __devinitdata = {
+	/* titan_110l */		{ 1, { { 3, -1 }, } },
+	/* titan_210l */		{ 1, { { 3, -1 }, } },
+	/* netmos_9xx5_combo */		{ 1, { { 2, -1 }, }, netmos_parallel_init },
+	/* netmos_9855 */		{ 1, { { 0, -1 }, }, netmos_parallel_init },
+	/* netmos_9855_2p */		{ 2, { { 0, -1 }, { 2, -1 }, } },
+	/* netmos_9900 */		{1, { { 3, 4 }, }, netmos_parallel_init },
+	/* netmos_9900_2p */		{2, { { 0, 1 }, { 3, 4 }, } },
+	/* netmos_99xx_1p */		{1, { { 0, 1 }, } },
+	/* avlab_1s1p     */		{ 1, { { 1, 2}, } },
+	/* avlab_1s2p     */		{ 2, { { 1, 2}, { 3, 4 },} },
+	/* avlab_2s1p     */		{ 1, { { 2, 3}, } },
+	/* siig_1s1p_10x */		{ 1, { { 3, 4 }, } },
+	/* siig_2s1p_10x */		{ 1, { { 4, 5 }, } },
+	/* siig_2p1s_20x */		{ 2, { { 1, 2 }, { 3, 4 }, } },
+	/* siig_1s1p_20x */		{ 1, { { 1, 2 }, } },
+	/* siig_2s1p_20x */		{ 1, { { 2, 3 }, } },
+	/* timedia_4078a */		{ 1, { { 2, -1 }, } },
+	/* timedia_4079h */             { 1, { { 2, 3 }, } },
+	/* timedia_4085h */             { 2, { { 2, -1 }, { 4, -1 }, } },
+	/* timedia_4088a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4089a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4095a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4096a */             { 2, { { 2, 3 }, { 4, 5 }, } },
+	/* timedia_4078u */             { 1, { { 2, -1 }, } },
+	/* timedia_4079a */             { 1, { { 2, 3 }, } },
+	/* timedia_4085u */             { 2, { { 2, -1 }, { 4, -1 }, } },
+	/* timedia_4079r */             { 1, { { 2, 3 }, } },
+	/* timedia_4079s */             { 1, { { 2, 3 }, } },
+	/* timedia_4079d */             { 1, { { 2, 3 }, } },
+	/* timedia_4079e */             { 1, { { 2, 3 }, } },
+	/* timedia_4079f */             { 1, { { 2, 3 }, } },
+	/* timedia_9079a */             { 1, { { 2, 3 }, } },
+	/* timedia_9079b */             { 1, { { 2, 3 }, } },
+	/* timedia_9079c */             { 1, { { 2, 3 }, } },
+};
+
+static struct pci_device_id parport_serial_pci_tbl[] = {
+	/* PCI cards */
+	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l },
+	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+	  0x1000, 0x0020, 0, 0, netmos_9855_2p },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+	  0x1000, 0x0022, 0, 0, netmos_9855_2p },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+	  0xA000, 0x3011, 0, 0, netmos_9900 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+	  0xA000, 0x3012, 0, 0, netmos_9900 },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+	  0xA000, 0x3020, 0, 0, netmos_9900_2p },
+	{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
+	  0xA000, 0x2000, 0, 0, netmos_99xx_1p },
+	/* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2110,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2111,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2112,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2140,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2141,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2142,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2160,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2161,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
+	{ PCI_VENDOR_ID_AFAVLAB, 0x2162,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x },
+	/* PCI_VENDOR_ID_TIMEDIA/SUNIX has many differing cards ...*/
+	{ 0x1409, 0x7168, 0x1409, 0x4078, 0, 0, timedia_4078a },
+	{ 0x1409, 0x7168, 0x1409, 0x4079, 0, 0, timedia_4079h },
+	{ 0x1409, 0x7168, 0x1409, 0x4085, 0, 0, timedia_4085h },
+	{ 0x1409, 0x7168, 0x1409, 0x4088, 0, 0, timedia_4088a },
+	{ 0x1409, 0x7168, 0x1409, 0x4089, 0, 0, timedia_4089a },
+	{ 0x1409, 0x7168, 0x1409, 0x4095, 0, 0, timedia_4095a },
+	{ 0x1409, 0x7168, 0x1409, 0x4096, 0, 0, timedia_4096a },
+	{ 0x1409, 0x7168, 0x1409, 0x5078, 0, 0, timedia_4078u },
+	{ 0x1409, 0x7168, 0x1409, 0x5079, 0, 0, timedia_4079a },
+	{ 0x1409, 0x7168, 0x1409, 0x5085, 0, 0, timedia_4085u },
+	{ 0x1409, 0x7168, 0x1409, 0x6079, 0, 0, timedia_4079r },
+	{ 0x1409, 0x7168, 0x1409, 0x7079, 0, 0, timedia_4079s },
+	{ 0x1409, 0x7168, 0x1409, 0x8079, 0, 0, timedia_4079d },
+	{ 0x1409, 0x7168, 0x1409, 0x9079, 0, 0, timedia_4079e },
+	{ 0x1409, 0x7168, 0x1409, 0xa079, 0, 0, timedia_4079f },
+	{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
+	{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
+	{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
+
+	{ 0, } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
+
+/*
+ * This table describes the serial "geometry" of these boards.  Any
+ * quirks for these can be found in drivers/serial/8250_pci.c
+ *
+ * Cards not tested are marked n/t
+ * If you have one of these cards and it works for you, please tell me..
+ */
+static struct pciserial_board pci_parport_serial_boards[] __devinitdata = {
+	[titan_110l] = {
+		.flags		= FL_BASE1 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[titan_210l] = {
+		.flags		= FL_BASE1 | FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[netmos_9xx5_combo] = {
+		.flags		= FL_BASE0 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[netmos_9855] = {
+		.flags		= FL_BASE2 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[netmos_9855_2p] = {
+		.flags		= FL_BASE4 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[netmos_9900] = { /* n/t */
+		.flags		= FL_BASE0 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[netmos_9900_2p] = { /* parallel only */ /* n/t */
+		.flags		= FL_BASE0,
+		.num_ports	= 0,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[netmos_99xx_1p] = { /* parallel only */ /* n/t */
+		.flags		= FL_BASE0,
+		.num_ports	= 0,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[avlab_1s1p] = { /* n/t */
+		.flags		= FL_BASE0 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[avlab_1s2p] = { /* n/t */
+		.flags		= FL_BASE0 | FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[avlab_2s1p] = { /* n/t */
+		.flags		= FL_BASE0 | FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+	},
+	[siig_1s1p_10x] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 1,
+		.base_baud	= 460800,
+		.uart_offset	= 8,
+	},
+	[siig_2s1p_10x] = {
+		.flags		= FL_BASE2,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[siig_2p1s_20x] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[siig_1s1p_20x] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[siig_2s1p_20x] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4078a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079h] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4085h] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4088a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4089a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4095a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4096a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4078u] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4085u] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079r] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079s] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079d] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079e] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_4079f] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_9079a] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_9079b] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+	[timedia_9079c] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
+};
+
+struct parport_serial_private {
+	struct serial_private	*serial;
+	int num_par;
+	struct parport *port[PARPORT_MAX];
+	struct parport_pc_pci par;
+};
+
+/* Register the serial port(s) of a PCI card. */
+static int __devinit serial_register (struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	struct parport_serial_private *priv = pci_get_drvdata (dev);
+	struct pciserial_board *board;
+	struct serial_private *serial;
+
+	board = &pci_parport_serial_boards[id->driver_data];
+
+	if (board->num_ports == 0)
+		return 0;
+
+	serial = pciserial_init_ports(dev, board);
+
+	if (IS_ERR(serial))
+		return PTR_ERR(serial);
+
+	priv->serial = serial;
+	return 0;
+}
+
+/* Register the parallel port(s) of a PCI card. */
+static int __devinit parport_register (struct pci_dev *dev,
+				       const struct pci_device_id *id)
+{
+	struct parport_pc_pci *card;
+	struct parport_serial_private *priv = pci_get_drvdata (dev);
+	int n, success = 0;
+
+	priv->par = cards[id->driver_data];
+	card = &priv->par;
+	if (card->preinit_hook &&
+	    card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE))
+		return -ENODEV;
+
+	for (n = 0; n < card->numports; n++) {
+		struct parport *port;
+		int lo = card->addr[n].lo;
+		int hi = card->addr[n].hi;
+		unsigned long io_lo, io_hi;
+		int irq;
+
+		if (priv->num_par == ARRAY_SIZE (priv->port)) {
+			printk (KERN_WARNING
+				"parport_serial: %s: only %zu parallel ports "
+				"supported (%d reported)\n", pci_name (dev),
+				ARRAY_SIZE(priv->port), card->numports);
+			break;
+		}
+
+		io_lo = pci_resource_start (dev, lo);
+		io_hi = 0;
+		if ((hi >= 0) && (hi <= 6))
+			io_hi = pci_resource_start (dev, hi);
+		else if (hi > 6)
+			io_lo += hi; /* Reinterpret the meaning of
+                                        "hi" as an offset (see SYBA
+                                        def.) */
+		/* TODO: test if sharing interrupts works */
+		irq = dev->irq;
+		if (irq == IRQ_NONE) {
+			dev_dbg(&dev->dev,
+			"PCI parallel port detected: I/O at %#lx(%#lx)\n",
+				io_lo, io_hi);
+			irq = PARPORT_IRQ_NONE;
+		} else {
+			dev_dbg(&dev->dev,
+		"PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n",
+				io_lo, io_hi, irq);
+		}
+		port = parport_pc_probe_port (io_lo, io_hi, irq,
+			      PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED);
+		if (port) {
+			priv->port[priv->num_par++] = port;
+			success = 1;
+		}
+	}
+
+	if (card->postinit_hook)
+		card->postinit_hook (dev, card, !success);
+
+	return 0;
+}
+
+static int __devinit parport_serial_pci_probe (struct pci_dev *dev,
+					       const struct pci_device_id *id)
+{
+	struct parport_serial_private *priv;
+	int err;
+
+	priv = kzalloc (sizeof *priv, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	pci_set_drvdata (dev, priv);
+
+	err = pci_enable_device (dev);
+	if (err) {
+		pci_set_drvdata (dev, NULL);
+		kfree (priv);
+		return err;
+	}
+
+	if (parport_register (dev, id)) {
+		pci_set_drvdata (dev, NULL);
+		kfree (priv);
+		return -ENODEV;
+	}
+
+	if (serial_register (dev, id)) {
+		int i;
+		for (i = 0; i < priv->num_par; i++)
+			parport_pc_unregister_port (priv->port[i]);
+		pci_set_drvdata (dev, NULL);
+		kfree (priv);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __devexit parport_serial_pci_remove (struct pci_dev *dev)
+{
+	struct parport_serial_private *priv = pci_get_drvdata (dev);
+	int i;
+
+	pci_set_drvdata(dev, NULL);
+
+	// Serial ports
+	if (priv->serial)
+		pciserial_remove_ports(priv->serial);
+
+	// Parallel ports
+	for (i = 0; i < priv->num_par; i++)
+		parport_pc_unregister_port (priv->port[i]);
+
+	kfree (priv);
+	return;
+}
+
+#ifdef CONFIG_PM
+static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	struct parport_serial_private *priv = pci_get_drvdata(dev);
+
+	if (priv->serial)
+		pciserial_suspend_ports(priv->serial);
+
+	/* FIXME: What about parport? */
+
+	pci_save_state(dev);
+	pci_set_power_state(dev, pci_choose_state(dev, state));
+	return 0;
+}
+
+static int parport_serial_pci_resume(struct pci_dev *dev)
+{
+	struct parport_serial_private *priv = pci_get_drvdata(dev);
+	int err;
+
+	pci_set_power_state(dev, PCI_D0);
+	pci_restore_state(dev);
+
+	/*
+	 * The device may have been disabled.  Re-enable it.
+	 */
+	err = pci_enable_device(dev);
+	if (err) {
+		printk(KERN_ERR "parport_serial: %s: error enabling "
+			"device for resume (%d)\n", pci_name(dev), err);
+		return err;
+	}
+
+	if (priv->serial)
+		pciserial_resume_ports(priv->serial);
+
+	/* FIXME: What about parport? */
+
+	return 0;
+}
+#endif
+
+static struct pci_driver parport_serial_pci_driver = {
+	.name		= "parport_serial",
+	.id_table	= parport_serial_pci_tbl,
+	.probe		= parport_serial_pci_probe,
+	.remove		= __devexit_p(parport_serial_pci_remove),
+#ifdef CONFIG_PM
+	.suspend	= parport_serial_pci_suspend,
+	.resume		= parport_serial_pci_resume,
+#endif
+};
+
+
+static int __init parport_serial_init (void)
+{
+	return pci_register_driver (&parport_serial_pci_driver);
+}
+
+static void __exit parport_serial_exit (void)
+{
+	pci_unregister_driver (&parport_serial_pci_driver);
+	return;
+}
+
+MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>");
+MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards");
+MODULE_LICENSE("GPL");
+
+module_init(parport_serial_init);
+module_exit(parport_serial_exit);
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
new file mode 100644
index 00000000..9390a534
--- /dev/null
+++ b/drivers/parport/parport_sunbpp.c
@@ -0,0 +1,400 @@
+/* parport_sunbpp.c: Parallel-port routines for SBUS
+ * 
+ * Author: Derrick J. Brashear <shadow@dementia.org>
+ *
+ * based on work by:
+ *          Phil Blundell <philb@gnu.org>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *	    Jose Renau <renau@acm.org>
+ *          David Campbell <campbell@tirian.che.curtin.edu.au>
+ *          Grant Guenther <grant@torque.net>
+ *          Eddie C. Dost <ecd@skynet.be>
+ *          Stephen Williams (steve@icarus.com)
+ *          Gus Baldauf (gbaldauf@ix.netcom.com)
+ *          Peter Zaitcev
+ *          Tom Dyas
+ *
+ * Updated to new SBUS device framework: David S. Miller <davem@davemloft.net>
+ * 
+ */
+
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <linux/parport.h>
+
+#include <asm/ptrace.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/oplib.h>           /* OpenProm Library */
+#include <asm/dma.h>             /* BPP uses LSI 64854 for DMA */
+#include <asm/irq.h>
+#include <asm/sunbpp.h>
+
+#undef __SUNBPP_DEBUG
+#ifdef __SUNBPP_DEBUG
+#define dprintk(x) printk x
+#else
+#define dprintk(x)
+#endif
+
+static void parport_sunbpp_disable_irq(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	u32 tmp;
+
+	tmp = sbus_readl(&regs->p_csr);
+	tmp &= ~DMA_INT_ENAB;
+	sbus_writel(tmp, &regs->p_csr);
+}
+
+static void parport_sunbpp_enable_irq(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	u32 tmp;
+
+	tmp = sbus_readl(&regs->p_csr);
+	tmp |= DMA_INT_ENAB;
+	sbus_writel(tmp, &regs->p_csr);
+}
+
+static void parport_sunbpp_write_data(struct parport *p, unsigned char d)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+
+	sbus_writeb(d, &regs->p_dr);
+	dprintk((KERN_DEBUG "wrote 0x%x\n", d));
+}
+
+static unsigned char parport_sunbpp_read_data(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+
+	return sbus_readb(&regs->p_dr);
+}
+
+#if 0
+static void control_pc_to_sunbpp(struct parport *p, unsigned char status)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_or = sbus_readb(&regs->p_or);
+
+	if (status & PARPORT_CONTROL_STROBE) 
+		value_tcr |= P_TCR_DS;
+	if (status & PARPORT_CONTROL_AUTOFD) 
+		value_or |= P_OR_AFXN;
+	if (status & PARPORT_CONTROL_INIT) 
+		value_or |= P_OR_INIT;
+	if (status & PARPORT_CONTROL_SELECT) 
+		value_or |= P_OR_SLCT_IN;
+
+	sbus_writeb(value_or, &regs->p_or);
+	sbus_writeb(value_tcr, &regs->p_tcr);
+}
+#endif
+
+static unsigned char status_sunbpp_to_pc(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char bits = 0;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_ir = sbus_readb(&regs->p_ir);
+
+	if (!(value_ir & P_IR_ERR))
+		bits |= PARPORT_STATUS_ERROR;
+	if (!(value_ir & P_IR_SLCT))
+		bits |= PARPORT_STATUS_SELECT;
+	if (!(value_ir & P_IR_PE))
+		bits |= PARPORT_STATUS_PAPEROUT;
+	if (value_tcr & P_TCR_ACK)
+		bits |= PARPORT_STATUS_ACK;
+	if (!(value_tcr & P_TCR_BUSY))
+		bits |= PARPORT_STATUS_BUSY;
+
+	dprintk((KERN_DEBUG "tcr 0x%x ir 0x%x\n", value_tcr, value_ir));
+	dprintk((KERN_DEBUG "read status 0x%x\n", bits));
+	return bits;
+}
+
+static unsigned char control_sunbpp_to_pc(struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char bits = 0;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_or = sbus_readb(&regs->p_or);
+
+	if (!(value_tcr & P_TCR_DS))
+		bits |= PARPORT_CONTROL_STROBE;
+	if (!(value_or & P_OR_AFXN))
+		bits |= PARPORT_CONTROL_AUTOFD;
+	if (!(value_or & P_OR_INIT))
+		bits |= PARPORT_CONTROL_INIT;
+	if (value_or & P_OR_SLCT_IN)
+		bits |= PARPORT_CONTROL_SELECT;
+
+	dprintk((KERN_DEBUG "tcr 0x%x or 0x%x\n", value_tcr, value_or));
+	dprintk((KERN_DEBUG "read control 0x%x\n", bits));
+	return bits;
+}
+
+static unsigned char parport_sunbpp_read_control(struct parport *p)
+{
+	return control_sunbpp_to_pc(p);
+}
+
+static unsigned char parport_sunbpp_frob_control(struct parport *p,
+						 unsigned char mask,
+						 unsigned char val)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+	unsigned char value_or = sbus_readb(&regs->p_or);
+
+	dprintk((KERN_DEBUG "frob1: tcr 0x%x or 0x%x\n",
+		 value_tcr, value_or));
+	if (mask & PARPORT_CONTROL_STROBE) {
+		if (val & PARPORT_CONTROL_STROBE) {
+			value_tcr &= ~P_TCR_DS;
+		} else {
+			value_tcr |= P_TCR_DS;
+		}
+	}
+	if (mask & PARPORT_CONTROL_AUTOFD) {
+		if (val & PARPORT_CONTROL_AUTOFD) {
+			value_or &= ~P_OR_AFXN;
+		} else {
+			value_or |= P_OR_AFXN;
+		}
+	}
+	if (mask & PARPORT_CONTROL_INIT) {
+		if (val & PARPORT_CONTROL_INIT) {
+			value_or &= ~P_OR_INIT;
+		} else {
+			value_or |= P_OR_INIT;
+		}
+	}
+	if (mask & PARPORT_CONTROL_SELECT) {
+		if (val & PARPORT_CONTROL_SELECT) {
+			value_or |= P_OR_SLCT_IN;
+		} else {
+			value_or &= ~P_OR_SLCT_IN;
+		}
+	}
+
+	sbus_writeb(value_or, &regs->p_or);
+	sbus_writeb(value_tcr, &regs->p_tcr);
+	dprintk((KERN_DEBUG "frob2: tcr 0x%x or 0x%x\n",
+		 value_tcr, value_or));
+	return parport_sunbpp_read_control(p);
+}
+
+static void parport_sunbpp_write_control(struct parport *p, unsigned char d)
+{
+	const unsigned char wm = (PARPORT_CONTROL_STROBE |
+				  PARPORT_CONTROL_AUTOFD |
+				  PARPORT_CONTROL_INIT |
+				  PARPORT_CONTROL_SELECT);
+
+	parport_sunbpp_frob_control (p, wm, d & wm);
+}
+
+static unsigned char parport_sunbpp_read_status(struct parport *p)
+{
+	return status_sunbpp_to_pc(p);
+}
+
+static void parport_sunbpp_data_forward (struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	unsigned char value_tcr = sbus_readb(&regs->p_tcr);
+
+	dprintk((KERN_DEBUG "forward\n"));
+	value_tcr &= ~P_TCR_DIR;
+	sbus_writeb(value_tcr, &regs->p_tcr);
+}
+
+static void parport_sunbpp_data_reverse (struct parport *p)
+{
+	struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
+	u8 val = sbus_readb(&regs->p_tcr);
+
+	dprintk((KERN_DEBUG "reverse\n"));
+	val |= P_TCR_DIR;
+	sbus_writeb(val, &regs->p_tcr);
+}
+
+static void parport_sunbpp_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.pc.ctr = 0xc;
+	s->u.pc.ecr = 0x0;
+}
+
+static void parport_sunbpp_save_state(struct parport *p, struct parport_state *s)
+{
+	s->u.pc.ctr = parport_sunbpp_read_control(p);
+}
+
+static void parport_sunbpp_restore_state(struct parport *p, struct parport_state *s)
+{
+	parport_sunbpp_write_control(p, s->u.pc.ctr);
+}
+
+static struct parport_operations parport_sunbpp_ops = 
+{
+	.write_data	= parport_sunbpp_write_data,
+	.read_data	= parport_sunbpp_read_data,
+
+	.write_control	= parport_sunbpp_write_control,
+	.read_control	= parport_sunbpp_read_control,
+	.frob_control	= parport_sunbpp_frob_control,
+
+	.read_status	= parport_sunbpp_read_status,
+
+	.enable_irq	= parport_sunbpp_enable_irq,
+	.disable_irq	= parport_sunbpp_disable_irq,
+
+	.data_forward	= parport_sunbpp_data_forward,
+	.data_reverse	= parport_sunbpp_data_reverse,
+
+	.init_state	= parport_sunbpp_init_state,
+	.save_state	= parport_sunbpp_save_state,
+	.restore_state	= parport_sunbpp_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+static int __devinit bpp_probe(struct platform_device *op)
+{
+	struct parport_operations *ops;
+	struct bpp_regs __iomem *regs;
+	int irq, dma, err = 0, size;
+	unsigned char value_tcr;
+	void __iomem *base;
+	struct parport *p;
+
+	irq = op->archdata.irqs[0];
+	base = of_ioremap(&op->resource[0], 0,
+			  resource_size(&op->resource[0]),
+			  "sunbpp");
+	if (!base)
+		return -ENODEV;
+
+	size = resource_size(&op->resource[0]);
+	dma = PARPORT_DMA_NONE;
+
+	ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+        if (!ops)
+		goto out_unmap;
+
+        memcpy (ops, &parport_sunbpp_ops, sizeof(struct parport_operations));
+
+	dprintk(("register_port\n"));
+	if (!(p = parport_register_port((unsigned long)base, irq, dma, ops)))
+		goto out_free_ops;
+
+	p->size = size;
+	p->dev = &op->dev;
+
+	if ((err = request_irq(p->irq, parport_irq_handler,
+			       IRQF_SHARED, p->name, p)) != 0) {
+		goto out_put_port;
+	}
+
+	parport_sunbpp_enable_irq(p);
+
+	regs = (struct bpp_regs __iomem *)p->base;
+
+	value_tcr = sbus_readb(&regs->p_tcr);
+	value_tcr &= ~P_TCR_DIR;
+	sbus_writeb(value_tcr, &regs->p_tcr);
+
+	printk(KERN_INFO "%s: sunbpp at 0x%lx\n", p->name, p->base);
+
+	dev_set_drvdata(&op->dev, p);
+
+	parport_announce_port(p);
+
+	return 0;
+
+out_put_port:
+	parport_put_port(p);
+
+out_free_ops:
+	kfree(ops);
+
+out_unmap:
+	of_iounmap(&op->resource[0], base, size);
+
+	return err;
+}
+
+static int __devexit bpp_remove(struct platform_device *op)
+{
+	struct parport *p = dev_get_drvdata(&op->dev);
+	struct parport_operations *ops = p->ops;
+
+	parport_remove_port(p);
+
+	if (p->irq != PARPORT_IRQ_NONE) {
+		parport_sunbpp_disable_irq(p);
+		free_irq(p->irq, p);
+	}
+
+	of_iounmap(&op->resource[0], (void __iomem *) p->base, p->size);
+	parport_put_port(p);
+	kfree(ops);
+
+	dev_set_drvdata(&op->dev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id bpp_match[] = {
+	{
+		.name = "SUNW,bpp",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, bpp_match);
+
+static struct platform_driver bpp_sbus_driver = {
+	.driver = {
+		.name = "bpp",
+		.owner = THIS_MODULE,
+		.of_match_table = bpp_match,
+	},
+	.probe		= bpp_probe,
+	.remove		= __devexit_p(bpp_remove),
+};
+
+module_platform_driver(bpp_sbus_driver);
+
+MODULE_AUTHOR("Derrick J Brashear");
+MODULE_DESCRIPTION("Parport Driver for Sparc bidirectional Port");
+MODULE_SUPPORTED_DEVICE("Sparc Bidirectional Parallel Port");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
new file mode 100644
index 00000000..d763bc9e
--- /dev/null
+++ b/drivers/parport/probe.c
@@ -0,0 +1,282 @@
+/*
+ * Parallel port device probing code
+ *
+ * Authors:    Carsten Gross, carsten@sol.wohnheim.uni-ulm.de
+ *             Philip Blundell <philb@gnu.org>
+ */
+
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <asm/uaccess.h>
+
+static const struct {
+	const char *token;
+	const char *descr;
+} classes[] = {
+	{ "",            "Legacy device" },
+	{ "PRINTER",     "Printer" },
+	{ "MODEM",       "Modem" },
+	{ "NET",         "Network device" },
+	{ "HDC",       	 "Hard disk" },
+	{ "PCMCIA",      "PCMCIA" },
+	{ "MEDIA",       "Multimedia device" },
+	{ "FDC",         "Floppy disk" },
+	{ "PORTS",       "Ports" },
+	{ "SCANNER",     "Scanner" },
+	{ "DIGICAM",     "Digital camera" },
+	{ "",            "Unknown device" },
+	{ "",            "Unspecified" },
+	{ "SCSIADAPTER", "SCSI adapter" },
+	{ NULL,          NULL }
+};
+
+static void pretty_print(struct parport *port, int device)
+{
+	struct parport_device_info *info = &port->probe_info[device + 1];
+
+	printk(KERN_INFO "%s", port->name);
+
+	if (device >= 0)
+		printk (" (addr %d)", device);
+
+	printk (": %s", classes[info->class].descr);
+	if (info->class)
+		printk(", %s %s", info->mfr, info->model);
+
+	printk("\n");
+}
+
+static void parse_data(struct parport *port, int device, char *str)
+{
+	char *txt = kmalloc(strlen(str)+1, GFP_KERNEL);
+	char *p = txt, *q;
+	int guessed_class = PARPORT_CLASS_UNSPEC;
+	struct parport_device_info *info = &port->probe_info[device + 1];
+
+	if (!txt) {
+		printk(KERN_WARNING "%s probe: memory squeeze\n", port->name);
+		return;
+	}
+	strcpy(txt, str);
+	while (p) {
+		char *sep;
+		q = strchr(p, ';');
+		if (q) *q = 0;
+		sep = strchr(p, ':');
+		if (sep) {
+			char *u;
+			*(sep++) = 0;
+			/* Get rid of trailing blanks */
+			u = sep + strlen (sep) - 1;
+			while (u >= p && *u == ' ')
+				*u-- = '\0';
+			u = p;
+			while (*u) {
+				*u = toupper(*u);
+				u++;
+			}
+			if (!strcmp(p, "MFG") || !strcmp(p, "MANUFACTURER")) {
+				kfree(info->mfr);
+				info->mfr = kstrdup(sep, GFP_KERNEL);
+			} else if (!strcmp(p, "MDL") || !strcmp(p, "MODEL")) {
+				kfree(info->model);
+				info->model = kstrdup(sep, GFP_KERNEL);
+			} else if (!strcmp(p, "CLS") || !strcmp(p, "CLASS")) {
+				int i;
+
+				kfree(info->class_name);
+				info->class_name = kstrdup(sep, GFP_KERNEL);
+				for (u = sep; *u; u++)
+					*u = toupper(*u);
+				for (i = 0; classes[i].token; i++) {
+					if (!strcmp(classes[i].token, sep)) {
+						info->class = i;
+						goto rock_on;
+					}
+				}
+				printk(KERN_WARNING "%s probe: warning, class '%s' not understood.\n", port->name, sep);
+				info->class = PARPORT_CLASS_OTHER;
+			} else if (!strcmp(p, "CMD") ||
+				   !strcmp(p, "COMMAND SET")) {
+				kfree(info->cmdset);
+				info->cmdset = kstrdup(sep, GFP_KERNEL);
+				/* if it speaks printer language, it's
+				   probably a printer */
+				if (strstr(sep, "PJL") || strstr(sep, "PCL"))
+					guessed_class = PARPORT_CLASS_PRINTER;
+			} else if (!strcmp(p, "DES") || !strcmp(p, "DESCRIPTION")) {
+				kfree(info->description);
+				info->description = kstrdup(sep, GFP_KERNEL);
+			}
+		}
+	rock_on:
+		if (q)
+			p = q + 1;
+		else
+			p = NULL;
+	}
+
+	/* If the device didn't tell us its class, maybe we have managed to
+	   guess one from the things it did say. */
+	if (info->class == PARPORT_CLASS_UNSPEC)
+		info->class = guessed_class;
+
+	pretty_print (port, device);
+
+	kfree(txt);
+}
+
+/* Read up to count-1 bytes of device id. Terminate buffer with
+ * '\0'. Buffer begins with two Device ID length bytes as given by
+ * device. */
+static ssize_t parport_read_device_id (struct parport *port, char *buffer,
+				       size_t count)
+{
+	unsigned char length[2];
+	unsigned lelen, belen;
+	size_t idlens[4];
+	unsigned numidlens;
+	unsigned current_idlen;
+	ssize_t retval;
+	size_t len;
+
+	/* First two bytes are MSB,LSB of inclusive length. */
+	retval = parport_read (port, length, 2);
+
+	if (retval < 0)
+		return retval;
+	if (retval != 2)
+		return -EIO;
+
+	if (count < 2)
+		return 0;
+	memcpy(buffer, length, 2);
+	len = 2;
+
+	/* Some devices wrongly send LE length, and some send it two
+	 * bytes short. Construct a sorted array of lengths to try. */
+	belen = (length[0] << 8) + length[1];
+	lelen = (length[1] << 8) + length[0];
+	idlens[0] = min(belen, lelen);
+	idlens[1] = idlens[0]+2;
+	if (belen != lelen) {
+		int off = 2;
+		/* Don't try lengths of 0x100 and 0x200 as 1 and 2 */
+		if (idlens[0] <= 2)
+			off = 0;
+		idlens[off] = max(belen, lelen);
+		idlens[off+1] = idlens[off]+2;
+		numidlens = off+2;
+	}
+	else {
+		/* Some devices don't truly implement Device ID, but
+		 * just return constant nibble forever. This catches
+		 * also those cases. */
+		if (idlens[0] == 0 || idlens[0] > 0xFFF) {
+			printk (KERN_DEBUG "%s: reported broken Device ID"
+				" length of %#zX bytes\n",
+				port->name, idlens[0]);
+			return -EIO;
+		}
+		numidlens = 2;
+	}
+
+	/* Try to respect the given ID length despite all the bugs in
+	 * the ID length. Read according to shortest possible ID
+	 * first. */
+	for (current_idlen = 0; current_idlen < numidlens; ++current_idlen) {
+		size_t idlen = idlens[current_idlen];
+		if (idlen+1 >= count)
+			break;
+
+		retval = parport_read (port, buffer+len, idlen-len);
+
+		if (retval < 0)
+			return retval;
+		len += retval;
+
+		if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
+			if (belen != len) {
+				printk (KERN_DEBUG "%s: Device ID was %zd bytes"
+					" while device told it would be %d"
+					" bytes\n",
+					port->name, len, belen);
+			}
+			goto done;
+		}
+
+		/* This might end reading the Device ID too
+		 * soon. Hopefully the needed fields were already in
+		 * the first 256 bytes or so that we must have read so
+		 * far. */
+		if (buffer[len-1] == ';') {
+ 			printk (KERN_DEBUG "%s: Device ID reading stopped"
+				" before device told data not available. "
+				"Current idlen %u of %u, len bytes %02X %02X\n",
+				port->name, current_idlen, numidlens,
+				length[0], length[1]);
+			goto done;
+		}
+	}
+	if (current_idlen < numidlens) {
+		/* Buffer not large enough, read to end of buffer. */
+		size_t idlen, len2;
+		if (len+1 < count) {
+			retval = parport_read (port, buffer+len, count-len-1);
+			if (retval < 0)
+				return retval;
+			len += retval;
+		}
+		/* Read the whole ID since some devices would not
+		 * otherwise give back the Device ID from beginning
+		 * next time when asked. */
+		idlen = idlens[current_idlen];
+		len2 = len;
+		while(len2 < idlen && retval > 0) {
+			char tmp[4];
+			retval = parport_read (port, tmp,
+					       min(sizeof tmp, idlen-len2));
+			if (retval < 0)
+				return retval;
+			len2 += retval;
+		}
+	}
+	/* In addition, there are broken devices out there that don't
+	   even finish off with a semi-colon. We do not need to care
+	   about those at this time. */
+ done:
+	buffer[len] = '\0';
+	return len;
+}
+
+/* Get Std 1284 Device ID. */
+ssize_t parport_device_id (int devnum, char *buffer, size_t count)
+{
+	ssize_t retval = -ENXIO;
+	struct pardevice *dev = parport_open (devnum, "Device ID probe");
+	if (!dev)
+		return -ENXIO;
+
+	parport_claim_or_block (dev);
+
+	/* Negotiate to compatibility mode, and then to device ID
+	 * mode. (This so that we start form beginning of device ID if
+	 * already in device ID mode.) */
+	parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+	retval = parport_negotiate (dev->port,
+				    IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
+
+	if (!retval) {
+		retval = parport_read_device_id (dev->port, buffer, count);
+		parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+		if (retval > 2)
+			parse_data (dev->port, dev->daisy, buffer+2);
+	}
+
+	parport_release (dev);
+	parport_close (dev);
+	return retval;
+}
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
new file mode 100644
index 00000000..3f56bc08
--- /dev/null
+++ b/drivers/parport/procfs.c
@@ -0,0 +1,610 @@
+/* Sysctl interface for parport devices.
+ * 
+ * Authors: David Campbell
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *          Philip Blundell <philb@gnu.org>
+ *          Andrea Arcangeli
+ *          Riccardo Facchetti <fizban@tin.it>
+ *
+ * based on work by Grant Guenther <grant@torque.net>
+ *              and Philip Blundell
+ *
+ * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
+ */
+
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/parport.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+
+#include <asm/uaccess.h>
+
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
+
+#define PARPORT_MIN_TIMESLICE_VALUE 1ul 
+#define PARPORT_MAX_TIMESLICE_VALUE ((unsigned long) HZ)
+#define PARPORT_MIN_SPINTIME_VALUE 1
+#define PARPORT_MAX_SPINTIME_VALUE 1000
+
+static int do_active_device(ctl_table *table, int write,
+		      void __user *result, size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[256];
+	struct pardevice *dev;
+	int len = 0;
+
+	if (write)		/* can't happen anyway */
+		return -EACCES;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+	
+	for (dev = port->devices; dev ; dev = dev->next) {
+		if(dev == port->cad) {
+			len += sprintf(buffer, "%s\n", dev->name);
+		}
+	}
+
+	if(!len) {
+		len += sprintf(buffer, "%s\n", "none");
+	}
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+#ifdef CONFIG_PARPORT_1284
+static int do_autoprobe(ctl_table *table, int write,
+			void __user *result, size_t *lenp, loff_t *ppos)
+{
+	struct parport_device_info *info = table->extra2;
+	const char *str;
+	char buffer[256];
+	int len = 0;
+
+	if (write) /* permissions stop this */
+		return -EACCES;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+	
+	if ((str = info->class_name) != NULL)
+		len += sprintf (buffer + len, "CLASS:%s;\n", str);
+
+	if ((str = info->model) != NULL)
+		len += sprintf (buffer + len, "MODEL:%s;\n", str);
+
+	if ((str = info->mfr) != NULL)
+		len += sprintf (buffer + len, "MANUFACTURER:%s;\n", str);
+
+	if ((str = info->description) != NULL)
+		len += sprintf (buffer + len, "DESCRIPTION:%s;\n", str);
+
+	if ((str = info->cmdset) != NULL)
+		len += sprintf (buffer + len, "COMMAND SET:%s;\n", str);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user (result, buffer, len) ? -EFAULT : 0;
+}
+#endif /* IEEE1284.3 support. */
+
+static int do_hardware_base_addr (ctl_table *table, int write,
+				  void __user *result,
+				  size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[20];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	len += sprintf (buffer, "%lu\t%lu\n", port->base, port->base_hi);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+static int do_hardware_irq (ctl_table *table, int write,
+			    void __user *result,
+			    size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[20];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	len += sprintf (buffer, "%d\n", port->irq);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+static int do_hardware_dma (ctl_table *table, int write,
+			    void __user *result,
+			    size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[20];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	len += sprintf (buffer, "%d\n", port->dma);
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+static int do_hardware_modes (ctl_table *table, int write,
+			      void __user *result,
+			      size_t *lenp, loff_t *ppos)
+{
+	struct parport *port = (struct parport *)table->extra1;
+	char buffer[40];
+	int len = 0;
+
+	if (*ppos) {
+		*lenp = 0;
+		return 0;
+	}
+
+	if (write) /* permissions prevent this anyway */
+		return -EACCES;
+
+	{
+#define printmode(x) {if(port->modes&PARPORT_MODE_##x){len+=sprintf(buffer+len,"%s%s",f?",":"",#x);f++;}}
+		int f = 0;
+		printmode(PCSPP);
+		printmode(TRISTATE);
+		printmode(COMPAT);
+		printmode(EPP);
+		printmode(ECP);
+		printmode(DMA);
+#undef printmode
+	}
+	buffer[len++] = '\n';
+
+	if (len > *lenp)
+		len = *lenp;
+	else
+		*lenp = len;
+
+	*ppos += len;
+
+	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
+}
+
+#define PARPORT_PORT_DIR(CHILD) { .procname = NULL, .mode = 0555, .child = CHILD }
+#define PARPORT_PARPORT_DIR(CHILD) { .procname = "parport", \
+                                     .mode = 0555, .child = CHILD }
+#define PARPORT_DEV_DIR(CHILD) { .procname = "dev", .mode = 0555, .child = CHILD }
+#define PARPORT_DEVICES_ROOT_DIR  {  .procname = "devices", \
+                                    .mode = 0555, .child = NULL }
+
+static const unsigned long parport_min_timeslice_value =
+PARPORT_MIN_TIMESLICE_VALUE;
+
+static const unsigned long parport_max_timeslice_value =
+PARPORT_MAX_TIMESLICE_VALUE;
+
+static const  int parport_min_spintime_value =
+PARPORT_MIN_SPINTIME_VALUE;
+
+static const int parport_max_spintime_value =
+PARPORT_MAX_SPINTIME_VALUE;
+
+
+struct parport_sysctl_table {
+	struct ctl_table_header *sysctl_header;
+	ctl_table vars[12];
+	ctl_table device_dir[2];
+	ctl_table port_dir[2];
+	ctl_table parport_dir[2];
+	ctl_table dev_dir[2];
+};
+
+static const struct parport_sysctl_table parport_sysctl_template = {
+	.sysctl_header = NULL,
+        {
+		{
+			.procname	= "spintime",
+			.data		= NULL,
+			.maxlen		= sizeof(int),
+			.mode		= 0644,
+			.proc_handler	= proc_dointvec_minmax,
+			.extra1		= (void*) &parport_min_spintime_value,
+			.extra2		= (void*) &parport_max_spintime_value
+		},
+		{
+			.procname	= "base-addr",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_hardware_base_addr
+		},
+		{
+			.procname	= "irq",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_hardware_irq
+		},
+		{
+			.procname	= "dma",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_hardware_dma
+		},
+		{
+			.procname	= "modes",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_hardware_modes
+		},
+		PARPORT_DEVICES_ROOT_DIR,
+#ifdef CONFIG_PARPORT_1284
+		{
+			.procname	= "autoprobe",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_autoprobe
+		},
+		{
+			.procname	= "autoprobe0",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_autoprobe
+		},
+		{
+			.procname	= "autoprobe1",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_autoprobe
+		},
+		{
+			.procname	= "autoprobe2",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_autoprobe
+		},
+		{
+			.procname	= "autoprobe3",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_autoprobe
+		},
+#endif /* IEEE 1284 support */
+		{}
+	},
+	{
+		{
+			.procname	= "active",
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0444,
+			.proc_handler	= do_active_device
+		},
+		{}
+	},
+	{
+		PARPORT_PORT_DIR(NULL),
+		{}
+	},
+	{
+		PARPORT_PARPORT_DIR(NULL),
+		{}
+	},
+	{
+		PARPORT_DEV_DIR(NULL),
+		{}
+	}
+};
+
+struct parport_device_sysctl_table
+{
+	struct ctl_table_header *sysctl_header;
+	ctl_table vars[2];
+	ctl_table device_dir[2];
+	ctl_table devices_root_dir[2];
+	ctl_table port_dir[2];
+	ctl_table parport_dir[2];
+	ctl_table dev_dir[2];
+};
+
+static const struct parport_device_sysctl_table
+parport_device_sysctl_template = {
+	.sysctl_header = NULL,
+	{
+		{
+			.procname 	= "timeslice",
+			.data		= NULL,
+			.maxlen		= sizeof(unsigned long),
+			.mode		= 0644,
+			.proc_handler	= proc_doulongvec_ms_jiffies_minmax,
+			.extra1		= (void*) &parport_min_timeslice_value,
+			.extra2		= (void*) &parport_max_timeslice_value
+		},
+	},
+	{
+		{
+			.procname	= NULL,
+			.data		= NULL,
+			.maxlen		= 0,
+			.mode		= 0555,
+			.child		= NULL
+		},
+		{}
+	},
+	{
+		PARPORT_DEVICES_ROOT_DIR,
+		{}
+	},
+	{
+		PARPORT_PORT_DIR(NULL),
+		{}
+	},
+	{
+		PARPORT_PARPORT_DIR(NULL),
+		{}
+	},
+	{
+		PARPORT_DEV_DIR(NULL),
+		{}
+	}
+};
+
+struct parport_default_sysctl_table
+{
+	struct ctl_table_header *sysctl_header;
+	ctl_table vars[3];
+        ctl_table default_dir[2];
+	ctl_table parport_dir[2];
+	ctl_table dev_dir[2];
+};
+
+static struct parport_default_sysctl_table
+parport_default_sysctl_table = {
+	.sysctl_header	= NULL,
+	{
+		{
+			.procname	= "timeslice",
+			.data		= &parport_default_timeslice,
+			.maxlen		= sizeof(parport_default_timeslice),
+			.mode		= 0644,
+			.proc_handler	= proc_doulongvec_ms_jiffies_minmax,
+			.extra1		= (void*) &parport_min_timeslice_value,
+			.extra2		= (void*) &parport_max_timeslice_value
+		},
+		{
+			.procname	= "spintime",
+			.data		= &parport_default_spintime,
+			.maxlen		= sizeof(parport_default_spintime),
+			.mode		= 0644,
+			.proc_handler	= proc_dointvec_minmax,
+			.extra1		= (void*) &parport_min_spintime_value,
+			.extra2		= (void*) &parport_max_spintime_value
+		},
+		{}
+	},
+	{
+		{
+			.procname	= "default",
+			.mode		= 0555,
+			.child		= parport_default_sysctl_table.vars
+		},
+		{}
+	},
+	{
+		PARPORT_PARPORT_DIR(parport_default_sysctl_table.default_dir),
+		{}
+	},
+	{
+		PARPORT_DEV_DIR(parport_default_sysctl_table.parport_dir),
+		{}
+	}
+};
+
+
+int parport_proc_register(struct parport *port)
+{
+	struct parport_sysctl_table *t;
+	int i;
+
+	t = kmalloc(sizeof(*t), GFP_KERNEL);
+	if (t == NULL)
+		return -ENOMEM;
+	memcpy(t, &parport_sysctl_template, sizeof(*t));
+
+	t->device_dir[0].extra1 = port;
+
+	for (i = 0; i < 5; i++)
+		t->vars[i].extra1 = port;
+
+	t->vars[0].data = &port->spintime;
+	t->vars[5].child = t->device_dir;
+	
+	for (i = 0; i < 5; i++)
+		t->vars[6 + i].extra2 = &port->probe_info[i];
+
+	t->port_dir[0].procname = port->name;
+
+	t->port_dir[0].child = t->vars;
+	t->parport_dir[0].child = t->port_dir;
+	t->dev_dir[0].child = t->parport_dir;
+
+	t->sysctl_header = register_sysctl_table(t->dev_dir);
+	if (t->sysctl_header == NULL) {
+		kfree(t);
+		t = NULL;
+	}
+	port->sysctl_table = t;
+	return 0;
+}
+
+int parport_proc_unregister(struct parport *port)
+{
+	if (port->sysctl_table) {
+		struct parport_sysctl_table *t = port->sysctl_table;
+		port->sysctl_table = NULL;
+		unregister_sysctl_table(t->sysctl_header);
+		kfree(t);
+	}
+	return 0;
+}
+
+int parport_device_proc_register(struct pardevice *device)
+{
+	struct parport_device_sysctl_table *t;
+	struct parport * port = device->port;
+	
+	t = kmalloc(sizeof(*t), GFP_KERNEL);
+	if (t == NULL)
+		return -ENOMEM;
+	memcpy(t, &parport_device_sysctl_template, sizeof(*t));
+
+	t->dev_dir[0].child = t->parport_dir;
+	t->parport_dir[0].child = t->port_dir;
+	t->port_dir[0].procname = port->name;
+	t->port_dir[0].child = t->devices_root_dir;
+	t->devices_root_dir[0].child = t->device_dir;
+
+	t->device_dir[0].procname = device->name;
+	t->device_dir[0].child = t->vars;
+	t->vars[0].data = &device->timeslice;
+
+	t->sysctl_header = register_sysctl_table(t->dev_dir);
+	if (t->sysctl_header == NULL) {
+		kfree(t);
+		t = NULL;
+	}
+	device->sysctl_table = t;
+	return 0;
+}
+
+int parport_device_proc_unregister(struct pardevice *device)
+{
+	if (device->sysctl_table) {
+		struct parport_device_sysctl_table *t = device->sysctl_table;
+		device->sysctl_table = NULL;
+		unregister_sysctl_table(t->sysctl_header);
+		kfree(t);
+	}
+	return 0;
+}
+
+static int __init parport_default_proc_register(void)
+{
+	parport_default_sysctl_table.sysctl_header =
+		register_sysctl_table(parport_default_sysctl_table.dev_dir);
+	return 0;
+}
+
+static void __exit parport_default_proc_unregister(void)
+{
+	if (parport_default_sysctl_table.sysctl_header) {
+		unregister_sysctl_table(parport_default_sysctl_table.
+					sysctl_header);
+		parport_default_sysctl_table.sysctl_header = NULL;
+	}
+}
+
+#else /* no sysctl or no procfs*/
+
+int parport_proc_register(struct parport *pp)
+{
+	return 0;
+}
+
+int parport_proc_unregister(struct parport *pp)
+{
+	return 0;
+}
+
+int parport_device_proc_register(struct pardevice *device)
+{
+	return 0;
+}
+
+int parport_device_proc_unregister(struct pardevice *device)
+{
+	return 0;
+}
+
+static int __init parport_default_proc_register (void)
+{
+	return 0;
+}
+
+static void __exit parport_default_proc_unregister (void)
+{
+}
+#endif
+
+module_init(parport_default_proc_register)
+module_exit(parport_default_proc_unregister)
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
new file mode 100644
index 00000000..a848e02e
--- /dev/null
+++ b/drivers/parport/share.c
@@ -0,0 +1,1032 @@
+/*
+ * Parallel-port resource manager code.
+ * 
+ * Authors: David Campbell <campbell@tirian.che.curtin.edu.au>
+ *          Tim Waugh <tim@cyberelk.demon.co.uk>
+ *          Jose Renau <renau@acm.org>
+ *          Philip Blundell <philb@gnu.org>
+ *	    Andrea Arcangeli
+ *
+ * based on work by Grant Guenther <grant@torque.net>
+ *          and Philip Blundell
+ *
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#undef PARPORT_DEBUG_SHARING		/* undef for production */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/threads.h>
+#include <linux/parport.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/kmod.h>
+
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <asm/irq.h>
+
+#undef PARPORT_PARANOID
+
+#define PARPORT_DEFAULT_TIMESLICE	(HZ/5)
+
+unsigned long parport_default_timeslice = PARPORT_DEFAULT_TIMESLICE;
+int parport_default_spintime =  DEFAULT_SPIN_TIME;
+
+static LIST_HEAD(portlist);
+static DEFINE_SPINLOCK(parportlist_lock);
+
+/* list of all allocated ports, sorted by ->number */
+static LIST_HEAD(all_ports);
+static DEFINE_SPINLOCK(full_list_lock);
+
+static LIST_HEAD(drivers);
+
+static DEFINE_MUTEX(registration_lock);
+
+/* What you can do to a port that's gone away.. */
+static void dead_write_lines (struct parport *p, unsigned char b){}
+static unsigned char dead_read_lines (struct parport *p) { return 0; }
+static unsigned char dead_frob_lines (struct parport *p, unsigned char b,
+			     unsigned char c) { return 0; }
+static void dead_onearg (struct parport *p){}
+static void dead_initstate (struct pardevice *d, struct parport_state *s) { }
+static void dead_state (struct parport *p, struct parport_state *s) { }
+static size_t dead_write (struct parport *p, const void *b, size_t l, int f)
+{ return 0; }
+static size_t dead_read (struct parport *p, void *b, size_t l, int f)
+{ return 0; }
+static struct parport_operations dead_ops = {
+	.write_data	= dead_write_lines,	/* data */
+	.read_data	= dead_read_lines,
+
+	.write_control	= dead_write_lines,	/* control */
+	.read_control	= dead_read_lines,
+	.frob_control	= dead_frob_lines,
+
+	.read_status	= dead_read_lines,	/* status */
+
+	.enable_irq	= dead_onearg,		/* enable_irq */
+	.disable_irq	= dead_onearg,		/* disable_irq */
+
+	.data_forward	= dead_onearg,		/* data_forward */
+	.data_reverse	= dead_onearg,		/* data_reverse */
+
+	.init_state	= dead_initstate,	/* init_state */
+	.save_state	= dead_state,
+	.restore_state	= dead_state,
+
+	.epp_write_data	= dead_write,		/* epp */
+	.epp_read_data	= dead_read,
+	.epp_write_addr	= dead_write,
+	.epp_read_addr	= dead_read,
+
+	.ecp_write_data	= dead_write,		/* ecp */
+	.ecp_read_data	= dead_read,
+	.ecp_write_addr	= dead_write,
+ 
+	.compat_write_data	= dead_write,	/* compat */
+	.nibble_read_data	= dead_read,	/* nibble */
+	.byte_read_data		= dead_read,	/* byte */
+
+	.owner		= NULL,
+};
+
+/* Call attach(port) for each registered driver. */
+static void attach_driver_chain(struct parport *port)
+{
+	/* caller has exclusive registration_lock */
+	struct parport_driver *drv;
+	list_for_each_entry(drv, &drivers, list)
+		drv->attach(port);
+}
+
+/* Call detach(port) for each registered driver. */
+static void detach_driver_chain(struct parport *port)
+{
+	struct parport_driver *drv;
+	/* caller has exclusive registration_lock */
+	list_for_each_entry(drv, &drivers, list)
+		drv->detach (port);
+}
+
+/* Ask kmod for some lowlevel drivers. */
+static void get_lowlevel_driver (void)
+{
+	/* There is no actual module called this: you should set
+	 * up an alias for modutils. */
+	request_module ("parport_lowlevel");
+}
+
+/**
+ *	parport_register_driver - register a parallel port device driver
+ *	@drv: structure describing the driver
+ *
+ *	This can be called by a parallel port device driver in order
+ *	to receive notifications about ports being found in the
+ *	system, as well as ports no longer available.
+ *
+ *	The @drv structure is allocated by the caller and must not be
+ *	deallocated until after calling parport_unregister_driver().
+ *
+ *	The driver's attach() function may block.  The port that
+ *	attach() is given will be valid for the duration of the
+ *	callback, but if the driver wants to take a copy of the
+ *	pointer it must call parport_get_port() to do so.  Calling
+ *	parport_register_device() on that port will do this for you.
+ *
+ *	The driver's detach() function may block.  The port that
+ *	detach() is given will be valid for the duration of the
+ *	callback, but if the driver wants to take a copy of the
+ *	pointer it must call parport_get_port() to do so.
+ *
+ *	Returns 0 on success.  Currently it always succeeds.
+ **/
+
+int parport_register_driver (struct parport_driver *drv)
+{
+	struct parport *port;
+
+	if (list_empty(&portlist))
+		get_lowlevel_driver ();
+
+	mutex_lock(&registration_lock);
+	list_for_each_entry(port, &portlist, list)
+		drv->attach(port);
+	list_add(&drv->list, &drivers);
+	mutex_unlock(&registration_lock);
+
+	return 0;
+}
+
+/**
+ *	parport_unregister_driver - deregister a parallel port device driver
+ *	@drv: structure describing the driver that was given to
+ *	      parport_register_driver()
+ *
+ *	This should be called by a parallel port device driver that
+ *	has registered itself using parport_register_driver() when it
+ *	is about to be unloaded.
+ *
+ *	When it returns, the driver's attach() routine will no longer
+ *	be called, and for each port that attach() was called for, the
+ *	detach() routine will have been called.
+ *
+ *	All the driver's attach() and detach() calls are guaranteed to have
+ *	finished by the time this function returns.
+ **/
+
+void parport_unregister_driver (struct parport_driver *drv)
+{
+	struct parport *port;
+
+	mutex_lock(&registration_lock);
+	list_del_init(&drv->list);
+	list_for_each_entry(port, &portlist, list)
+		drv->detach(port);
+	mutex_unlock(&registration_lock);
+}
+
+static void free_port (struct parport *port)
+{
+	int d;
+	spin_lock(&full_list_lock);
+	list_del(&port->full_list);
+	spin_unlock(&full_list_lock);
+	for (d = 0; d < 5; d++) {
+		kfree(port->probe_info[d].class_name);
+		kfree(port->probe_info[d].mfr);
+		kfree(port->probe_info[d].model);
+		kfree(port->probe_info[d].cmdset);
+		kfree(port->probe_info[d].description);
+	}
+
+	kfree(port->name);
+	kfree(port);
+}
+
+/**
+ *	parport_get_port - increment a port's reference count
+ *	@port: the port
+ *
+ *	This ensures that a struct parport pointer remains valid
+ *	until the matching parport_put_port() call.
+ **/
+
+struct parport *parport_get_port (struct parport *port)
+{
+	atomic_inc (&port->ref_count);
+	return port;
+}
+
+/**
+ *	parport_put_port - decrement a port's reference count
+ *	@port: the port
+ *
+ *	This should be called once for each call to parport_get_port(),
+ *	once the port is no longer needed.
+ **/
+
+void parport_put_port (struct parport *port)
+{
+	if (atomic_dec_and_test (&port->ref_count))
+		/* Can destroy it now. */
+		free_port (port);
+
+	return;
+}
+
+/**
+ *	parport_register_port - register a parallel port
+ *	@base: base I/O address
+ *	@irq: IRQ line
+ *	@dma: DMA channel
+ *	@ops: pointer to the port driver's port operations structure
+ *
+ *	When a parallel port (lowlevel) driver finds a port that
+ *	should be made available to parallel port device drivers, it
+ *	should call parport_register_port().  The @base, @irq, and
+ *	@dma parameters are for the convenience of port drivers, and
+ *	for ports where they aren't meaningful needn't be set to
+ *	anything special.  They can be altered afterwards by adjusting
+ *	the relevant members of the parport structure that is returned
+ *	and represents the port.  They should not be tampered with
+ *	after calling parport_announce_port, however.
+ *
+ *	If there are parallel port device drivers in the system that
+ *	have registered themselves using parport_register_driver(),
+ *	they are not told about the port at this time; that is done by
+ *	parport_announce_port().
+ *
+ *	The @ops structure is allocated by the caller, and must not be
+ *	deallocated before calling parport_remove_port().
+ *
+ *	If there is no memory to allocate a new parport structure,
+ *	this function will return %NULL.
+ **/
+
+struct parport *parport_register_port(unsigned long base, int irq, int dma,
+				      struct parport_operations *ops)
+{
+	struct list_head *l;
+	struct parport *tmp;
+	int num;
+	int device;
+	char *name;
+
+	tmp = kmalloc(sizeof(struct parport), GFP_KERNEL);
+	if (!tmp) {
+		printk(KERN_WARNING "parport: memory squeeze\n");
+		return NULL;
+	}
+
+	/* Init our structure */
+ 	memset(tmp, 0, sizeof(struct parport));
+	tmp->base = base;
+	tmp->irq = irq;
+	tmp->dma = dma;
+	tmp->muxport = tmp->daisy = tmp->muxsel = -1;
+	tmp->modes = 0;
+ 	INIT_LIST_HEAD(&tmp->list);
+	tmp->devices = tmp->cad = NULL;
+	tmp->flags = 0;
+	tmp->ops = ops;
+	tmp->physport = tmp;
+	memset (tmp->probe_info, 0, 5 * sizeof (struct parport_device_info));
+	rwlock_init(&tmp->cad_lock);
+	spin_lock_init(&tmp->waitlist_lock);
+	spin_lock_init(&tmp->pardevice_lock);
+	tmp->ieee1284.mode = IEEE1284_MODE_COMPAT;
+	tmp->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+	sema_init(&tmp->ieee1284.irq, 0);
+	tmp->spintime = parport_default_spintime;
+	atomic_set (&tmp->ref_count, 1);
+	INIT_LIST_HEAD(&tmp->full_list);
+
+	name = kmalloc(15, GFP_KERNEL);
+	if (!name) {
+		printk(KERN_ERR "parport: memory squeeze\n");
+		kfree(tmp);
+		return NULL;
+	}
+	/* Search for the lowest free parport number. */
+
+	spin_lock(&full_list_lock);
+	for (l = all_ports.next, num = 0; l != &all_ports; l = l->next, num++) {
+		struct parport *p = list_entry(l, struct parport, full_list);
+		if (p->number != num)
+			break;
+	}
+	tmp->portnum = tmp->number = num;
+	list_add_tail(&tmp->full_list, l);
+	spin_unlock(&full_list_lock);
+
+	/*
+	 * Now that the portnum is known finish doing the Init.
+	 */
+	sprintf(name, "parport%d", tmp->portnum = tmp->number);
+	tmp->name = name;
+
+	for (device = 0; device < 5; device++)
+		/* assume the worst */
+		tmp->probe_info[device].class = PARPORT_CLASS_LEGACY;
+
+	tmp->waithead = tmp->waittail = NULL;
+
+	return tmp;
+}
+
+/**
+ *	parport_announce_port - tell device drivers about a parallel port
+ *	@port: parallel port to announce
+ *
+ *	After a port driver has registered a parallel port with
+ *	parport_register_port, and performed any necessary
+ *	initialisation or adjustments, it should call
+ *	parport_announce_port() in order to notify all device drivers
+ *	that have called parport_register_driver().  Their attach()
+ *	functions will be called, with @port as the parameter.
+ **/
+
+void parport_announce_port (struct parport *port)
+{
+	int i;
+
+#ifdef CONFIG_PARPORT_1284
+	/* Analyse the IEEE1284.3 topology of the port. */
+	parport_daisy_init(port);
+#endif
+
+	if (!port->dev)
+		printk(KERN_WARNING "%s: fix this legacy "
+				"no-device port driver!\n",
+				port->name);
+
+	parport_proc_register(port);
+	mutex_lock(&registration_lock);
+	spin_lock_irq(&parportlist_lock);
+	list_add_tail(&port->list, &portlist);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			list_add_tail(&slave->list, &portlist);
+	}
+	spin_unlock_irq(&parportlist_lock);
+
+	/* Let drivers know that new port(s) has arrived. */
+	attach_driver_chain (port);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			attach_driver_chain(slave);
+	}
+	mutex_unlock(&registration_lock);
+}
+
+/**
+ *	parport_remove_port - deregister a parallel port
+ *	@port: parallel port to deregister
+ *
+ *	When a parallel port driver is forcibly unloaded, or a
+ *	parallel port becomes inaccessible, the port driver must call
+ *	this function in order to deal with device drivers that still
+ *	want to use it.
+ *
+ *	The parport structure associated with the port has its
+ *	operations structure replaced with one containing 'null'
+ *	operations that return errors or just don't do anything.
+ *
+ *	Any drivers that have registered themselves using
+ *	parport_register_driver() are notified that the port is no
+ *	longer accessible by having their detach() routines called
+ *	with @port as the parameter.
+ **/
+
+void parport_remove_port(struct parport *port)
+{
+	int i;
+
+	mutex_lock(&registration_lock);
+
+	/* Spread the word. */
+	detach_driver_chain (port);
+
+#ifdef CONFIG_PARPORT_1284
+	/* Forget the IEEE1284.3 topology of the port. */
+	parport_daisy_fini(port);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (!slave)
+			continue;
+		detach_driver_chain(slave);
+		parport_daisy_fini(slave);
+	}
+#endif
+
+	port->ops = &dead_ops;
+	spin_lock(&parportlist_lock);
+	list_del_init(&port->list);
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			list_del_init(&slave->list);
+	}
+	spin_unlock(&parportlist_lock);
+
+	mutex_unlock(&registration_lock);
+
+	parport_proc_unregister(port);
+
+	for (i = 1; i < 3; i++) {
+		struct parport *slave = port->slaves[i-1];
+		if (slave)
+			parport_put_port(slave);
+	}
+}
+
+/**
+ *	parport_register_device - register a device on a parallel port
+ *	@port: port to which the device is attached
+ *	@name: a name to refer to the device
+ *	@pf: preemption callback
+ *	@kf: kick callback (wake-up)
+ *	@irq_func: interrupt handler
+ *	@flags: registration flags
+ *	@handle: data for callback functions
+ *
+ *	This function, called by parallel port device drivers,
+ *	declares that a device is connected to a port, and tells the
+ *	system all it needs to know.
+ *
+ *	The @name is allocated by the caller and must not be
+ *	deallocated until the caller calls @parport_unregister_device
+ *	for that device.
+ *
+ *	The preemption callback function, @pf, is called when this
+ *	device driver has claimed access to the port but another
+ *	device driver wants to use it.  It is given @handle as its
+ *	parameter, and should return zero if it is willing for the
+ *	system to release the port to another driver on its behalf.
+ *	If it wants to keep control of the port it should return
+ *	non-zero, and no action will be taken.  It is good manners for
+ *	the driver to try to release the port at the earliest
+ *	opportunity after its preemption callback rejects a preemption
+ *	attempt.  Note that if a preemption callback is happy for
+ *	preemption to go ahead, there is no need to release the port;
+ *	it is done automatically.  This function may not block, as it
+ *	may be called from interrupt context.  If the device driver
+ *	does not support preemption, @pf can be %NULL.
+ *
+ *	The wake-up ("kick") callback function, @kf, is called when
+ *	the port is available to be claimed for exclusive access; that
+ *	is, parport_claim() is guaranteed to succeed when called from
+ *	inside the wake-up callback function.  If the driver wants to
+ *	claim the port it should do so; otherwise, it need not take
+ *	any action.  This function may not block, as it may be called
+ *	from interrupt context.  If the device driver does not want to
+ *	be explicitly invited to claim the port in this way, @kf can
+ *	be %NULL.
+ *
+ *	The interrupt handler, @irq_func, is called when an interrupt
+ *	arrives from the parallel port.  Note that if a device driver
+ *	wants to use interrupts it should use parport_enable_irq(),
+ *	and can also check the irq member of the parport structure
+ *	representing the port.
+ *
+ *	The parallel port (lowlevel) driver is the one that has called
+ *	request_irq() and whose interrupt handler is called first.
+ *	This handler does whatever needs to be done to the hardware to
+ *	acknowledge the interrupt (for PC-style ports there is nothing
+ *	special to be done).  It then tells the IEEE 1284 code about
+ *	the interrupt, which may involve reacting to an IEEE 1284
+ *	event depending on the current IEEE 1284 phase.  After this,
+ *	it calls @irq_func.  Needless to say, @irq_func will be called
+ *	from interrupt context, and may not block.
+ *
+ *	The %PARPORT_DEV_EXCL flag is for preventing port sharing, and
+ *	so should only be used when sharing the port with other device
+ *	drivers is impossible and would lead to incorrect behaviour.
+ *	Use it sparingly!  Normally, @flags will be zero.
+ *
+ *	This function returns a pointer to a structure that represents
+ *	the device on the port, or %NULL if there is not enough memory
+ *	to allocate space for that structure.
+ **/
+
+struct pardevice *
+parport_register_device(struct parport *port, const char *name,
+			int (*pf)(void *), void (*kf)(void *),
+			void (*irq_func)(void *), 
+			int flags, void *handle)
+{
+	struct pardevice *tmp;
+
+	if (port->physport->flags & PARPORT_FLAG_EXCL) {
+		/* An exclusive device is registered. */
+		printk (KERN_DEBUG "%s: no more devices allowed\n",
+			port->name);
+		return NULL;
+	}
+
+	if (flags & PARPORT_DEV_LURK) {
+		if (!pf || !kf) {
+			printk(KERN_INFO "%s: refused to register lurking device (%s) without callbacks\n", port->name, name);
+			return NULL;
+		}
+	}
+
+	/* We up our own module reference count, and that of the port
+           on which a device is to be registered, to ensure that
+           neither of us gets unloaded while we sleep in (e.g.)
+           kmalloc.
+         */
+	if (!try_module_get(port->ops->owner)) {
+		return NULL;
+	}
+		
+	parport_get_port (port);
+
+	tmp = kmalloc(sizeof(struct pardevice), GFP_KERNEL);
+	if (tmp == NULL) {
+		printk(KERN_WARNING "%s: memory squeeze, couldn't register %s.\n", port->name, name);
+		goto out;
+	}
+
+	tmp->state = kmalloc(sizeof(struct parport_state), GFP_KERNEL);
+	if (tmp->state == NULL) {
+		printk(KERN_WARNING "%s: memory squeeze, couldn't register %s.\n", port->name, name);
+		goto out_free_pardevice;
+	}
+
+	tmp->name = name;
+	tmp->port = port;
+	tmp->daisy = -1;
+	tmp->preempt = pf;
+	tmp->wakeup = kf;
+	tmp->private = handle;
+	tmp->flags = flags;
+	tmp->irq_func = irq_func;
+	tmp->waiting = 0;
+	tmp->timeout = 5 * HZ;
+
+	/* Chain this onto the list */
+	tmp->prev = NULL;
+	/*
+	 * This function must not run from an irq handler so we don' t need
+	 * to clear irq on the local CPU. -arca
+	 */
+	spin_lock(&port->physport->pardevice_lock);
+
+	if (flags & PARPORT_DEV_EXCL) {
+		if (port->physport->devices) {
+			spin_unlock (&port->physport->pardevice_lock);
+			printk (KERN_DEBUG
+				"%s: cannot grant exclusive access for "
+				"device %s\n", port->name, name);
+			goto out_free_all;
+		}
+		port->flags |= PARPORT_FLAG_EXCL;
+	}
+
+	tmp->next = port->physport->devices;
+	wmb(); /* Make sure that tmp->next is written before it's
+                  added to the list; see comments marked 'no locking
+                  required' */
+	if (port->physport->devices)
+		port->physport->devices->prev = tmp;
+	port->physport->devices = tmp;
+	spin_unlock(&port->physport->pardevice_lock);
+
+	init_waitqueue_head(&tmp->wait_q);
+	tmp->timeslice = parport_default_timeslice;
+	tmp->waitnext = tmp->waitprev = NULL;
+
+	/*
+	 * This has to be run as last thing since init_state may need other
+	 * pardevice fields. -arca
+	 */
+	port->ops->init_state(tmp, tmp->state);
+	if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) {
+		port->proc_device = tmp;
+		parport_device_proc_register(tmp);
+	}
+	return tmp;
+
+ out_free_all:
+	kfree(tmp->state);
+ out_free_pardevice:
+	kfree(tmp);
+ out:
+	parport_put_port (port);
+	module_put(port->ops->owner);
+
+	return NULL;
+}
+
+/**
+ *	parport_unregister_device - deregister a device on a parallel port
+ *	@dev: pointer to structure representing device
+ *
+ *	This undoes the effect of parport_register_device().
+ **/
+
+void parport_unregister_device(struct pardevice *dev)
+{
+	struct parport *port;
+
+#ifdef PARPORT_PARANOID
+	if (dev == NULL) {
+		printk(KERN_ERR "parport_unregister_device: passed NULL\n");
+		return;
+	}
+#endif
+
+	port = dev->port->physport;
+
+	if (port->proc_device == dev) {
+		port->proc_device = NULL;
+		clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags);
+		parport_device_proc_unregister(dev);
+	}
+
+	if (port->cad == dev) {
+		printk(KERN_DEBUG "%s: %s forgot to release port\n",
+		       port->name, dev->name);
+		parport_release (dev);
+	}
+
+	spin_lock(&port->pardevice_lock);
+	if (dev->next)
+		dev->next->prev = dev->prev;
+	if (dev->prev)
+		dev->prev->next = dev->next;
+	else
+		port->devices = dev->next;
+
+	if (dev->flags & PARPORT_DEV_EXCL)
+		port->flags &= ~PARPORT_FLAG_EXCL;
+
+	spin_unlock(&port->pardevice_lock);
+
+	/* Make sure we haven't left any pointers around in the wait
+	 * list. */
+	spin_lock_irq(&port->waitlist_lock);
+	if (dev->waitprev || dev->waitnext || port->waithead == dev) {
+		if (dev->waitprev)
+			dev->waitprev->waitnext = dev->waitnext;
+		else
+			port->waithead = dev->waitnext;
+		if (dev->waitnext)
+			dev->waitnext->waitprev = dev->waitprev;
+		else
+			port->waittail = dev->waitprev;
+	}
+	spin_unlock_irq(&port->waitlist_lock);
+
+	kfree(dev->state);
+	kfree(dev);
+
+	module_put(port->ops->owner);
+	parport_put_port (port);
+}
+
+/**
+ *	parport_find_number - find a parallel port by number
+ *	@number: parallel port number
+ *
+ *	This returns the parallel port with the specified number, or
+ *	%NULL if there is none.
+ *
+ *	There is an implicit parport_get_port() done already; to throw
+ *	away the reference to the port that parport_find_number()
+ *	gives you, use parport_put_port().
+ */
+
+struct parport *parport_find_number (int number)
+{
+	struct parport *port, *result = NULL;
+
+	if (list_empty(&portlist))
+		get_lowlevel_driver ();
+
+	spin_lock (&parportlist_lock);
+	list_for_each_entry(port, &portlist, list) {
+		if (port->number == number) {
+			result = parport_get_port (port);
+			break;
+		}
+	}
+	spin_unlock (&parportlist_lock);
+	return result;
+}
+
+/**
+ *	parport_find_base - find a parallel port by base address
+ *	@base: base I/O address
+ *
+ *	This returns the parallel port with the specified base
+ *	address, or %NULL if there is none.
+ *
+ *	There is an implicit parport_get_port() done already; to throw
+ *	away the reference to the port that parport_find_base()
+ *	gives you, use parport_put_port().
+ */
+
+struct parport *parport_find_base (unsigned long base)
+{
+	struct parport *port, *result = NULL;
+
+	if (list_empty(&portlist))
+		get_lowlevel_driver ();
+
+	spin_lock (&parportlist_lock);
+	list_for_each_entry(port, &portlist, list) {
+		if (port->base == base) {
+			result = parport_get_port (port);
+			break;
+		}
+	}
+	spin_unlock (&parportlist_lock);
+	return result;
+}
+
+/**
+ *	parport_claim - claim access to a parallel port device
+ *	@dev: pointer to structure representing a device on the port
+ *
+ *	This function will not block and so can be used from interrupt
+ *	context.  If parport_claim() succeeds in claiming access to
+ *	the port it returns zero and the port is available to use.  It
+ *	may fail (returning non-zero) if the port is in use by another
+ *	driver and that driver is not willing to relinquish control of
+ *	the port.
+ **/
+
+int parport_claim(struct pardevice *dev)
+{
+	struct pardevice *oldcad;
+	struct parport *port = dev->port->physport;
+	unsigned long flags;
+
+	if (port->cad == dev) {
+		printk(KERN_INFO "%s: %s already owner\n",
+		       dev->port->name,dev->name);
+		return 0;
+	}
+
+	/* Preempt any current device */
+	write_lock_irqsave (&port->cad_lock, flags);
+	if ((oldcad = port->cad) != NULL) {
+		if (oldcad->preempt) {
+			if (oldcad->preempt(oldcad->private))
+				goto blocked;
+			port->ops->save_state(port, dev->state);
+		} else
+			goto blocked;
+
+		if (port->cad != oldcad) {
+			/* I think we'll actually deadlock rather than
+                           get here, but just in case.. */
+			printk(KERN_WARNING
+			       "%s: %s released port when preempted!\n",
+			       port->name, oldcad->name);
+			if (port->cad)
+				goto blocked;
+		}
+	}
+
+	/* Can't fail from now on, so mark ourselves as no longer waiting.  */
+	if (dev->waiting & 1) {
+		dev->waiting = 0;
+
+		/* Take ourselves out of the wait list again.  */
+		spin_lock_irq (&port->waitlist_lock);
+		if (dev->waitprev)
+			dev->waitprev->waitnext = dev->waitnext;
+		else
+			port->waithead = dev->waitnext;
+		if (dev->waitnext)
+			dev->waitnext->waitprev = dev->waitprev;
+		else
+			port->waittail = dev->waitprev;
+		spin_unlock_irq (&port->waitlist_lock);
+		dev->waitprev = dev->waitnext = NULL;
+	}
+
+	/* Now we do the change of devices */
+	port->cad = dev;
+
+#ifdef CONFIG_PARPORT_1284
+	/* If it's a mux port, select it. */
+	if (dev->port->muxport >= 0) {
+		/* FIXME */
+		port->muxsel = dev->port->muxport;
+	}
+
+	/* If it's a daisy chain device, select it. */
+	if (dev->daisy >= 0) {
+		/* This could be lazier. */
+		if (!parport_daisy_select (port, dev->daisy,
+					   IEEE1284_MODE_COMPAT))
+			port->daisy = dev->daisy;
+	}
+#endif /* IEEE1284.3 support */
+
+	/* Restore control registers */
+	port->ops->restore_state(port, dev->state);
+	write_unlock_irqrestore(&port->cad_lock, flags);
+	dev->time = jiffies;
+	return 0;
+
+blocked:
+	/* If this is the first time we tried to claim the port, register an
+	   interest.  This is only allowed for devices sleeping in
+	   parport_claim_or_block(), or those with a wakeup function.  */
+
+	/* The cad_lock is still held for writing here */
+	if (dev->waiting & 2 || dev->wakeup) {
+		spin_lock (&port->waitlist_lock);
+		if (test_and_set_bit(0, &dev->waiting) == 0) {
+			/* First add ourselves to the end of the wait list. */
+			dev->waitnext = NULL;
+			dev->waitprev = port->waittail;
+			if (port->waittail) {
+				port->waittail->waitnext = dev;
+				port->waittail = dev;
+			} else
+				port->waithead = port->waittail = dev;
+		}
+		spin_unlock (&port->waitlist_lock);
+	}
+	write_unlock_irqrestore (&port->cad_lock, flags);
+	return -EAGAIN;
+}
+
+/**
+ *	parport_claim_or_block - claim access to a parallel port device
+ *	@dev: pointer to structure representing a device on the port
+ *
+ *	This behaves like parport_claim(), but will block if necessary
+ *	to wait for the port to be free.  A return value of 1
+ *	indicates that it slept; 0 means that it succeeded without
+ *	needing to sleep.  A negative error code indicates failure.
+ **/
+
+int parport_claim_or_block(struct pardevice *dev)
+{
+	int r;
+
+	/* Signal to parport_claim() that we can wait even without a
+	   wakeup function.  */
+	dev->waiting = 2;
+
+	/* Try to claim the port.  If this fails, we need to sleep.  */
+	r = parport_claim(dev);
+	if (r == -EAGAIN) {
+#ifdef PARPORT_DEBUG_SHARING
+		printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", dev->name);
+#endif
+		/*
+		 * FIXME!!! Use the proper locking for dev->waiting,
+		 * and make this use the "wait_event_interruptible()"
+		 * interfaces. The cli/sti that used to be here
+		 * did nothing.
+		 *
+		 * See also parport_release()
+		 */
+
+		/* If dev->waiting is clear now, an interrupt
+		   gave us the port and we would deadlock if we slept.  */
+		if (dev->waiting) {
+			interruptible_sleep_on (&dev->wait_q);
+			if (signal_pending (current)) {
+				return -EINTR;
+			}
+			r = 1;
+		} else {
+			r = 0;
+#ifdef PARPORT_DEBUG_SHARING
+			printk(KERN_DEBUG "%s: didn't sleep in parport_claim_or_block()\n",
+			       dev->name);
+#endif
+		}
+
+#ifdef PARPORT_DEBUG_SHARING
+		if (dev->port->physport->cad != dev)
+			printk(KERN_DEBUG "%s: exiting parport_claim_or_block "
+			       "but %s owns port!\n", dev->name,
+			       dev->port->physport->cad ?
+			       dev->port->physport->cad->name:"nobody");
+#endif
+	}
+	dev->waiting = 0;
+	return r;
+}
+
+/**
+ *	parport_release - give up access to a parallel port device
+ *	@dev: pointer to structure representing parallel port device
+ *
+ *	This function cannot fail, but it should not be called without
+ *	the port claimed.  Similarly, if the port is already claimed
+ *	you should not try claiming it again.
+ **/
+
+void parport_release(struct pardevice *dev)
+{
+	struct parport *port = dev->port->physport;
+	struct pardevice *pd;
+	unsigned long flags;
+
+	/* Make sure that dev is the current device */
+	write_lock_irqsave(&port->cad_lock, flags);
+	if (port->cad != dev) {
+		write_unlock_irqrestore (&port->cad_lock, flags);
+		printk(KERN_WARNING "%s: %s tried to release parport "
+		       "when not owner\n", port->name, dev->name);
+		return;
+	}
+
+#ifdef CONFIG_PARPORT_1284
+	/* If this is on a mux port, deselect it. */
+	if (dev->port->muxport >= 0) {
+		/* FIXME */
+		port->muxsel = -1;
+	}
+
+	/* If this is a daisy device, deselect it. */
+	if (dev->daisy >= 0) {
+		parport_daisy_deselect_all (port);
+		port->daisy = -1;
+	}
+#endif
+
+	port->cad = NULL;
+	write_unlock_irqrestore(&port->cad_lock, flags);
+
+	/* Save control registers */
+	port->ops->save_state(port, dev->state);
+
+	/* If anybody is waiting, find out who's been there longest and
+	   then wake them up. (Note: no locking required) */
+	/* !!! LOCKING IS NEEDED HERE */
+	for (pd = port->waithead; pd; pd = pd->waitnext) {
+		if (pd->waiting & 2) { /* sleeping in claim_or_block */
+			parport_claim(pd);
+			if (waitqueue_active(&pd->wait_q))
+				wake_up_interruptible(&pd->wait_q);
+			return;
+		} else if (pd->wakeup) {
+			pd->wakeup(pd->private);
+			if (dev->port->cad) /* racy but no matter */
+				return;
+		} else {
+			printk(KERN_ERR "%s: don't know how to wake %s\n", port->name, pd->name);
+		}
+	}
+
+	/* Nobody was waiting, so walk the list to see if anyone is
+	   interested in being woken up. (Note: no locking required) */
+	/* !!! LOCKING IS NEEDED HERE */
+	for (pd = port->devices; (port->cad == NULL) && pd; pd = pd->next) {
+		if (pd->wakeup && pd != dev)
+			pd->wakeup(pd->private);
+	}
+}
+
+irqreturn_t parport_irq_handler(int irq, void *dev_id)
+{
+	struct parport *port = dev_id;
+
+	parport_generic_irq(port);
+
+	return IRQ_HANDLED;
+}
+
+/* Exported symbols for modules. */
+
+EXPORT_SYMBOL(parport_claim);
+EXPORT_SYMBOL(parport_claim_or_block);
+EXPORT_SYMBOL(parport_release);
+EXPORT_SYMBOL(parport_register_port);
+EXPORT_SYMBOL(parport_announce_port);
+EXPORT_SYMBOL(parport_remove_port);
+EXPORT_SYMBOL(parport_register_driver);
+EXPORT_SYMBOL(parport_unregister_driver);
+EXPORT_SYMBOL(parport_register_device);
+EXPORT_SYMBOL(parport_unregister_device);
+EXPORT_SYMBOL(parport_get_port);
+EXPORT_SYMBOL(parport_put_port);
+EXPORT_SYMBOL(parport_find_number);
+EXPORT_SYMBOL(parport_find_base);
+EXPORT_SYMBOL(parport_irq_handler);
+
+MODULE_LICENSE("GPL");