Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 213 insertions, 0 deletions

diff --git a/drivers/net/wireless/rtl8188C_8192C/include/rtw_led.h b/drivers/net/wireless/rtl8188C_8192C/include/rtw_led.h
new file mode 100755
index 00000000..aae9008c
--- /dev/null
+++ b/drivers/net/wireless/rtl8188C_8192C/include/rtw_led.h
@@ -0,0 +1,213 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *                                        
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTW_LED_H_
+#define __RTW_LED_H_
+
+#include <drv_conf.h>
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MSECS(t)        (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+
+typedef enum _LED_CTL_MODE{
+        LED_CTL_POWER_ON = 1,
+        LED_CTL_LINK = 2,
+        LED_CTL_NO_LINK = 3,
+        LED_CTL_TX = 4,
+        LED_CTL_RX = 5,
+        LED_CTL_SITE_SURVEY = 6,
+        LED_CTL_POWER_OFF = 7,
+        LED_CTL_START_TO_LINK = 8,
+        LED_CTL_START_WPS = 9,
+        LED_CTL_STOP_WPS = 10,
+        LED_CTL_START_WPS_BOTTON = 11, //added for runtop
+        LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA	
+	 LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
+}LED_CTL_MODE;
+
+
+#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI)
+//================================================================================
+// LED object.
+//================================================================================
+
+typedef enum _LED_STATE_871x{
+	LED_UNKNOWN = 0,
+	RTW_LED_ON = 1,
+	RTW_LED_OFF = 2,
+	LED_BLINK_NORMAL = 3,
+	LED_BLINK_SLOWLY = 4,
+	LED_POWER_ON_BLINK = 5,
+	LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
+	LED_NO_LINK_BLINK = 7, // LED is blinking during no link state.
+	LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case
+	LED_BLINK_WPS = 9,	// LED is blinkg during WPS communication	
+	LED_TXRX_BLINK = 10,
+	LED_BLINK_WPS_STOP = 11,	//for ALPHA	
+	LED_BLINK_WPS_STOP_OVERLAP = 12,	//for BELKIN
+}LED_STATE_871x;
+
+#define IS_LED_WPS_BLINKING(_LED_871x)	(((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \
+					|| ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \
+					|| ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_871x) 	(((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \
+					||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress)
+
+typedef enum _LED_PIN_871x{
+	LED_PIN_GPIO0,
+	LED_PIN_LED0,
+	LED_PIN_LED1
+}LED_PIN_871x;
+
+typedef struct _LED_871x{
+	_adapter				*padapter;
+	LED_PIN_871x		LedPin;	// Identify how to implement this SW led.
+	LED_STATE_871x		CurrLedState; // Current LED state.
+	u8					bLedOn; // true if LED is ON, false if LED is OFF.
+
+	u8					bSWLedCtrl;
+
+	u8					bLedBlinkInProgress; // true if it is blinking, false o.w..
+	// ALPHA, added by chiyoko, 20090106
+	u8					bLedNoLinkBlinkInProgress;
+	u8					bLedLinkBlinkInProgress;
+	u8					bLedStartToLinkBlinkInProgress;
+	u8					bLedScanBlinkInProgress;
+	u8					bLedWPSBlinkInProgress;
+	
+	u32					BlinkTimes; // Number of times to toggle led state for blinking.
+	LED_STATE_871x		BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
+
+	_timer				BlinkTimer; // Timer object for led blinking.
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD
+	_workitem			BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
+#endif
+} LED_871x, *PLED_871x;
+
+
+//================================================================================
+// LED customization.
+//================================================================================
+
+typedef	enum _LED_STRATEGY_871x{
+	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
+	SW_LED_MODE1, // 2 LEDs, through LED0 and LED1. For ALPHA.
+	SW_LED_MODE2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
+	SW_LED_MODE3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
+	SW_LED_MODE4, //for Edimax / Belkin
+	SW_LED_MODE5, //for Sercomm / Belkin
+	SW_LED_MODE6, //for 88CU minicard, porting from ce SW_LED_MODE7
+	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
+}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
+#endif //CONFIG_USB_HCI
+
+#ifdef CONFIG_PCI_HCI
+//================================================================================
+// LED object.
+//================================================================================
+
+typedef	enum _LED_STATE_871x{
+	LED_UNKNOWN = 0,
+	RTW_LED_ON = 1,
+	RTW_LED_OFF = 2,
+	LED_BLINK_NORMAL = 3,
+	LED_BLINK_SLOWLY = 4,
+	LED_POWER_ON_BLINK = 5,
+	LED_SCAN_BLINK = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
+	LED_NO_LINK_BLINK = 7, // LED is blinking during no link state.
+	LED_BLINK_StartToBlink = 8, 
+	LED_BLINK_TXRX = 9,
+	LED_BLINK_RUNTOP = 10, // Customized for RunTop
+	LED_BLINK_CAMEO = 11,
+}LED_STATE_871x;
+
+typedef enum _LED_PIN_871x{
+	LED_PIN_GPIO0,
+	LED_PIN_LED0,
+	LED_PIN_LED1,
+	LED_PIN_LED2
+}LED_PIN_871x;
+
+typedef struct _LED_871x{
+	_adapter				*padapter;
+
+	LED_PIN_871x		LedPin;	// Identify how to implement this SW led.
+
+	LED_STATE_871x		CurrLedState; // Current LED state.
+	u8					bLedOn; // TRUE if LED is ON, FALSE if LED is OFF.
+
+	u8					bLedBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
+	u8					bLedWPSBlinkInProgress; // TRUE if it is blinking, FALSE o.w..
+
+	u8					bLedSlowBlinkInProgress;//added by vivi, for led new mode
+	u32					BlinkTimes; // Number of times to toggle led state for blinking.
+	LED_STATE_871x		BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
+
+	_timer				BlinkTimer; // Timer object for led blinking.
+} LED_871x, *PLED_871x;
+
+
+//================================================================================
+// LED customization.
+//================================================================================
+
+typedef	enum _LED_STRATEGY_871x{
+	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
+	SW_LED_MODE1, // SW control for PCI Express
+	SW_LED_MODE2, // SW control for Cameo.
+	SW_LED_MODE3, // SW contorl for RunTop.
+	SW_LED_MODE4, // SW control for Netcore
+	SW_LED_MODE5, //added by vivi, for led new mode, DLINK
+	SW_LED_MODE6, //added by vivi, for led new mode, PRONET
+	SW_LED_MODE7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
+	SW_LED_MODE8, //added by chiyokolin, for QMI
+	SW_LED_MODE9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1 
+	SW_LED_MODE10, //added by chiyokolin, for Edimax-ASUS
+	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
+}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
+
+#define LED_CM8_BLINK_INTERVAL		500	//for QMI
+#endif //CONFIG_PCI_HCI
+
+struct led_priv{
+	/* add for led controll */
+	LED_871x			SwLed0;
+	LED_871x			SwLed1;
+	LED_STRATEGY_871x	LedStrategy;
+	u8					bRegUseLed;
+	void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
+	/* add for led controll */
+};
+
+#ifdef CONFIG_SW_LED
+#define rtw_led_control(adapter, LedAction) \
+	do { \
+		if((adapter)->ledpriv.LedControlHandler) \
+			(adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
+	} while(0)
+#else //CONFIG_SW_LED
+#define rtw_led_control(adapter, LedAction)
+#endif //CONFIG_SW_LED
+
+extern void BlinkHandler(PLED_871x	 pLed);
+
+#endif //__RTW_LED_H_
+