Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 305 insertions, 0 deletions

diff --git a/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/dhd_custom_gpio.c b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/dhd_custom_gpio.c
new file mode 100755
index 00000000..a8fecaac
--- /dev/null
+++ b/drivers/net/wireless/bcmdhd.1.28.23.x.cn_ap6476/dhd_custom_gpio.c
@@ -0,0 +1,305 @@
+/*
+* Customer code to add GPIO control during WLAN start/stop
+* Copyright (C) 1999-2012, Broadcom Corporation
+* 
+*      Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2 (the "GPL"),
+* available at http://www.broadcom.com/licenses/GPLv2.php, with the
+* following added to such license:
+* 
+*      As a special exception, the copyright holders of this software give you
+* permission to link this software with independent modules, and to copy and
+* distribute the resulting executable under terms of your choice, provided that
+* you also meet, for each linked independent module, the terms and conditions of
+* the license of that module.  An independent module is a module which is not
+* derived from this software.  The special exception does not apply to any
+* modifications of the software.
+* 
+*      Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a license
+* other than the GPL, without Broadcom's express prior written consent.
+*
+* $Id: dhd_custom_gpio.c 353167 2012-08-24 22:11:30Z $
+*/
+
+#include <typedefs.h>
+#include <linuxver.h>
+#include <osl.h>
+#include <bcmutils.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+
+#include <wlioctl.h>
+#include <wl_iw.h>
+
+#define WL_ERROR printk
+#define WL_TRACE(x)
+
+#ifdef CUSTOMER_HW
+#if defined(CUSTOMER_OOB)
+extern int bcm_wlan_get_oob_irq(void);
+#endif
+extern  void bcm_wlan_power_off(int);
+extern  void bcm_wlan_power_on(int);
+#endif /* CUSTOMER_HW */
+#if defined(CUSTOMER_HW2)
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+int wifi_set_power(int on, unsigned long msec);
+int wifi_get_irq_number(unsigned long *irq_flags_ptr);
+int wifi_get_mac_addr(unsigned char *buf);
+void *wifi_get_country_code(char *ccode);
+#else
+int wifi_set_power(int on, unsigned long msec) { return -1; }
+int wifi_get_irq_number(unsigned long *irq_flags_ptr) { return -1; }
+int wifi_get_mac_addr(unsigned char *buf) { return -1; }
+void *wifi_get_country_code(char *ccode) { return NULL; }
+#endif /* CONFIG_WIFI_CONTROL_FUNC */
+#endif 
+
+
+
+#if defined(OOB_INTR_ONLY)
+
+#if defined(BCMLXSDMMC)
+extern int sdioh_mmc_irq(int irq);
+#endif /* (BCMLXSDMMC)  */
+
+#ifdef CUSTOMER_HW3
+#include <mach/gpio.h>
+#endif
+
+/* Customer specific Host GPIO defintion  */
+static int dhd_oob_gpio_num = -1;
+
+module_param(dhd_oob_gpio_num, int, 0644);
+MODULE_PARM_DESC(dhd_oob_gpio_num, "DHD oob gpio number");
+
+/* This function will return:
+ *  1) return :  Host gpio interrupt number per customer platform
+ *  2) irq_flags_ptr : Type of Host interrupt as Level or Edge
+ *
+ *  NOTE :
+ *  Customer should check his platform definitions
+ *  and his Host Interrupt spec
+ *  to figure out the proper setting for his platform.
+ *  Broadcom provides just reference settings as example.
+ *
+ */
+int dhd_customer_oob_irq_map(unsigned long *irq_flags_ptr)
+{
+	int  host_oob_irq = 0;
+
+#if defined(CUSTOMER_HW2)
+	host_oob_irq = wifi_get_irq_number(irq_flags_ptr);
+
+#elif defined(CUSTOMER_OOB)
+	host_oob_irq = bcm_wlan_get_oob_irq();
+
+#else
+#if defined(CUSTOM_OOB_GPIO_NUM)
+	if (dhd_oob_gpio_num < 0) {
+		dhd_oob_gpio_num = CUSTOM_OOB_GPIO_NUM;
+	}
+#endif /* CUSTOMER_OOB_GPIO_NUM */
+
+	if (dhd_oob_gpio_num < 0) {
+		WL_ERROR(("%s: ERROR customer specific Host GPIO is NOT defined \n",
+		__FUNCTION__));
+		return (dhd_oob_gpio_num);
+	}
+
+	WL_ERROR(("%s: customer specific Host GPIO number is (%d)\n",
+	         __FUNCTION__, dhd_oob_gpio_num));
+
+#if defined CUSTOMER_HW
+	host_oob_irq = MSM_GPIO_TO_INT(dhd_oob_gpio_num);
+#elif defined CUSTOMER_HW3
+	gpio_request(dhd_oob_gpio_num, "oob irq");
+	host_oob_irq = gpio_to_irq(dhd_oob_gpio_num);
+	gpio_direction_input(dhd_oob_gpio_num);
+#endif /* CUSTOMER_HW */
+#endif 
+
+	return (host_oob_irq);
+}
+#endif 
+
+/* Customer function to control hw specific wlan gpios */
+void
+dhd_customer_gpio_wlan_ctrl(int onoff)
+{
+	switch (onoff) {
+		case WLAN_RESET_OFF:
+			WL_TRACE(("%s: call customer specific GPIO to insert WLAN RESET\n",
+				__FUNCTION__));
+#ifdef CUSTOMER_HW
+			bcm_wlan_power_off(2);
+#endif /* CUSTOMER_HW */
+#if defined(CUSTOMER_HW2)
+			wifi_set_power(0, 0);
+#endif
+			mdelay(100);
+			WL_ERROR(("=========== WLAN placed in RESET ========\n"));
+		break;
+
+		case WLAN_RESET_ON:
+			WL_TRACE(("%s: callc customer specific GPIO to remove WLAN RESET\n",
+				__FUNCTION__));
+#ifdef CUSTOMER_HW
+			bcm_wlan_power_on(2);
+#endif /* CUSTOMER_HW */
+#if defined(CUSTOMER_HW2)
+			wifi_set_power(1, 0);
+#endif
+			mdelay(100);
+			WL_ERROR(("=========== WLAN going back to live  ========\n"));
+		break;
+
+		case WLAN_POWER_OFF:
+			WL_TRACE(("%s: call customer specific GPIO to turn off WL_REG_ON\n",
+				__FUNCTION__));
+#ifdef CUSTOMER_HW
+			bcm_wlan_power_off(1);
+#endif /* CUSTOMER_HW */
+			WL_ERROR(("=========== WLAN placed in POWER OFF ========\n"));
+		break;
+
+		case WLAN_POWER_ON:
+			WL_TRACE(("%s: call customer specific GPIO to turn on WL_REG_ON\n",
+				__FUNCTION__));
+#ifdef CUSTOMER_HW
+			bcm_wlan_power_on(1);
+#endif /* CUSTOMER_HW */
+			/* Lets customer power to get stable */
+			mdelay(100);
+			WL_ERROR(("=========== WLAN placed in POWER ON ========\n"));
+		break;
+	}
+}
+
+#ifdef GET_CUSTOM_MAC_ENABLE
+/* Function to get custom MAC address */
+int
+dhd_custom_get_mac_address(unsigned char *buf)
+{
+	int ret = 0;
+
+	WL_TRACE(("%s Enter\n", __FUNCTION__));
+	if (!buf)
+		return -EINVAL;
+
+	/* Customer access to MAC address stored outside of DHD driver */
+#if defined(CUSTOMER_HW2) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35))
+	ret = wifi_get_mac_addr(buf);
+#endif
+
+#ifdef EXAMPLE_GET_MAC
+	/* EXAMPLE code */
+	{
+		struct ether_addr ea_example = {{0x00, 0x11, 0x22, 0x33, 0x44, 0xFF}};
+		bcopy((char *)&ea_example, buf, sizeof(struct ether_addr));
+	}
+#endif /* EXAMPLE_GET_MAC */
+
+	return ret;
+}
+#endif /* GET_CUSTOM_MAC_ENABLE */
+
+/* Customized Locale table : OPTIONAL feature */
+const struct cntry_locales_custom translate_custom_table[] = {
+/* Table should be filled out based on custom platform regulatory requirement */
+#ifdef EXAMPLE_TABLE
+	{"",   "XY", 4},  /* Universal if Country code is unknown or empty */
+	{"US", "US", 69}, /* input ISO "US" to : US regrev 69 */
+	{"CA", "US", 69}, /* input ISO "CA" to : US regrev 69 */
+	{"EU", "EU", 5},  /* European union countries to : EU regrev 05 */
+	{"AT", "EU", 5},
+	{"BE", "EU", 5},
+	{"BG", "EU", 5},
+	{"CY", "EU", 5},
+	{"CZ", "EU", 5},
+	{"DK", "EU", 5},
+	{"EE", "EU", 5},
+	{"FI", "EU", 5},
+	{"FR", "EU", 5},
+	{"DE", "EU", 5},
+	{"GR", "EU", 5},
+	{"HU", "EU", 5},
+	{"IE", "EU", 5},
+	{"IT", "EU", 5},
+	{"LV", "EU", 5},
+	{"LI", "EU", 5},
+	{"LT", "EU", 5},
+	{"LU", "EU", 5},
+	{"MT", "EU", 5},
+	{"NL", "EU", 5},
+	{"PL", "EU", 5},
+	{"PT", "EU", 5},
+	{"RO", "EU", 5},
+	{"SK", "EU", 5},
+	{"SI", "EU", 5},
+	{"ES", "EU", 5},
+	{"SE", "EU", 5},
+	{"GB", "EU", 5},
+	{"KR", "XY", 3},
+	{"AU", "XY", 3},
+	{"CN", "XY", 3}, /* input ISO "CN" to : XY regrev 03 */
+	{"TW", "XY", 3},
+	{"AR", "XY", 3},
+	{"MX", "XY", 3},
+	{"IL", "IL", 0},
+	{"CH", "CH", 0},
+	{"TR", "TR", 0},
+	{"NO", "NO", 0},
+#endif /* EXMAPLE_TABLE */
+};
+
+
+/* Customized Locale convertor
+*  input : ISO 3166-1 country abbreviation
+*  output: customized cspec
+*/
+void get_customized_country_code(char *country_iso_code, wl_country_t *cspec)
+{
+#if defined(CUSTOMER_HW2) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 39))
+
+	struct cntry_locales_custom *cloc_ptr;
+
+	if (!cspec)
+		return;
+
+	cloc_ptr = wifi_get_country_code(country_iso_code);
+	if (cloc_ptr) {
+		strlcpy(cspec->ccode, cloc_ptr->custom_locale, WLC_CNTRY_BUF_SZ);
+		cspec->rev = cloc_ptr->custom_locale_rev;
+	}
+	return;
+#else
+	int size, i;
+
+	size = ARRAYSIZE(translate_custom_table);
+
+	if (cspec == 0)
+		 return;
+
+	if (size == 0)
+		 return;
+
+	for (i = 0; i < size; i++) {
+		if (strcmp(country_iso_code, translate_custom_table[i].iso_abbrev) == 0) {
+			memcpy(cspec->ccode,
+				translate_custom_table[i].custom_locale, WLC_CNTRY_BUF_SZ);
+			cspec->rev = translate_custom_table[i].custom_locale_rev;
+			return;
+		}
+	}
+#ifdef EXAMPLE_TABLE
+	/* if no country code matched return first universal code from translate_custom_table */
+	memcpy(cspec->ccode, translate_custom_table[0].custom_locale, WLC_CNTRY_BUF_SZ);
+	cspec->rev = translate_custom_table[0].custom_locale_rev;
+#endif /* EXMAPLE_TABLE */
+	return;
+#endif /* defined(CUSTOMER_HW2) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)) */
+}