Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 489 insertions, 0 deletions

diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h
new file mode 100644
index 00000000..ab252188
--- /dev/null
+++ b/drivers/media/video/cpia2/cpia2.h
@@ -0,0 +1,489 @@
+/****************************************************************************
+ *
+ *  Filename: cpia2.h
+ *
+ *  Copyright 2001, STMicrolectronics, Inc.
+ *
+ *  Contact:  steve.miller@st.com
+ *
+ *  Description:
+ *     This is a USB driver for CPiA2 based video cameras.
+ *
+ *     This driver is modelled on the cpia usb driver by
+ *     Jochen Scharrlach and Johannes Erdfeldt.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ ****************************************************************************/
+
+#ifndef __CPIA2_H__
+#define __CPIA2_H__
+
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+
+#include "cpia2dev.h"
+#include "cpia2_registers.h"
+
+/* define for verbose debug output */
+//#define _CPIA2_DEBUG_
+
+/***
+ * Image defines
+ ***/
+
+/*  Misc constants */
+#define ALLOW_CORRUPT 0		/* Causes collater to discard checksum */
+
+/* USB Transfer mode */
+#define XFER_ISOC 0
+#define XFER_BULK 1
+
+/* USB Alternates */
+#define USBIF_CMDONLY 0
+#define USBIF_BULK 1
+#define USBIF_ISO_1 2	/*  128 bytes/ms */
+#define USBIF_ISO_2 3	/*  384 bytes/ms */
+#define USBIF_ISO_3 4	/*  640 bytes/ms */
+#define USBIF_ISO_4 5	/*  768 bytes/ms */
+#define USBIF_ISO_5 6	/*  896 bytes/ms */
+#define USBIF_ISO_6 7	/* 1023 bytes/ms */
+
+/* Flicker Modes */
+#define NEVER_FLICKER   0
+#define ANTI_FLICKER_ON 1
+#define FLICKER_60      60
+#define FLICKER_50      50
+
+/* Debug flags */
+#define DEBUG_NONE          0
+#define DEBUG_REG           0x00000001
+#define DEBUG_DUMP_PATCH    0x00000002
+#define DEBUG_DUMP_REGS     0x00000004
+
+/***
+ * Video frame sizes
+ ***/
+enum {
+	VIDEOSIZE_VGA = 0,	/* 640x480 */
+	VIDEOSIZE_CIF,		/* 352x288 */
+	VIDEOSIZE_QVGA,		/* 320x240 */
+	VIDEOSIZE_QCIF,		/* 176x144 */
+	VIDEOSIZE_288_216,
+	VIDEOSIZE_256_192,
+	VIDEOSIZE_224_168,
+	VIDEOSIZE_192_144,
+};
+
+#define STV_IMAGE_CIF_ROWS    288
+#define STV_IMAGE_CIF_COLS    352
+
+#define STV_IMAGE_QCIF_ROWS   144
+#define STV_IMAGE_QCIF_COLS   176
+
+#define STV_IMAGE_VGA_ROWS    480
+#define STV_IMAGE_VGA_COLS    640
+
+#define STV_IMAGE_QVGA_ROWS   240
+#define STV_IMAGE_QVGA_COLS   320
+
+#define JPEG_MARKER_COM (1<<6)	/* Comment segment */
+
+/***
+ * Enums
+ ***/
+/* Sensor types available with cpia2 asics */
+enum sensors {
+	CPIA2_SENSOR_410,
+	CPIA2_SENSOR_500
+};
+
+/* Asic types available in the CPiA2 architecture */
+#define  CPIA2_ASIC_672 0x67
+
+/* Device types (stv672, stv676, etc) */
+#define  DEVICE_STV_672   0x0001
+#define  DEVICE_STV_676   0x0002
+
+enum frame_status {
+	FRAME_EMPTY,
+	FRAME_READING,		/* In the process of being grabbed into */
+	FRAME_READY,		/* Ready to be read */
+	FRAME_ERROR,
+};
+
+/***
+ * Register access (for USB request byte)
+ ***/
+enum {
+	CAMERAACCESS_SYSTEM = 0,
+	CAMERAACCESS_VC,
+	CAMERAACCESS_VP,
+	CAMERAACCESS_IDATA
+};
+
+#define CAMERAACCESS_TYPE_BLOCK    0x00
+#define CAMERAACCESS_TYPE_RANDOM   0x04
+#define CAMERAACCESS_TYPE_MASK     0x08
+#define CAMERAACCESS_TYPE_REPEAT   0x0C
+
+#define TRANSFER_READ 0
+#define TRANSFER_WRITE 1
+
+#define DEFAULT_ALT   USBIF_ISO_6
+#define DEFAULT_BRIGHTNESS 0x46
+#define DEFAULT_CONTRAST 0x93
+#define DEFAULT_SATURATION 0x7f
+#define DEFAULT_TARGET_KB 0x30
+
+/* Power state */
+#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER
+#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER
+
+
+/********
+ * Commands
+ *******/
+enum {
+	CPIA2_CMD_NONE = 0,
+	CPIA2_CMD_GET_VERSION,
+	CPIA2_CMD_GET_PNP_ID,
+	CPIA2_CMD_GET_ASIC_TYPE,
+	CPIA2_CMD_GET_SENSOR,
+	CPIA2_CMD_GET_VP_DEVICE,
+	CPIA2_CMD_GET_VP_BRIGHTNESS,
+	CPIA2_CMD_SET_VP_BRIGHTNESS,
+	CPIA2_CMD_GET_CONTRAST,
+	CPIA2_CMD_SET_CONTRAST,
+	CPIA2_CMD_GET_VP_SATURATION,
+	CPIA2_CMD_SET_VP_SATURATION,
+	CPIA2_CMD_GET_VP_GPIO_DIRECTION,
+	CPIA2_CMD_SET_VP_GPIO_DIRECTION,
+	CPIA2_CMD_GET_VP_GPIO_DATA,
+	CPIA2_CMD_SET_VP_GPIO_DATA,
+	CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION,
+	CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION,
+	CPIA2_CMD_GET_VC_MP_GPIO_DATA,
+	CPIA2_CMD_SET_VC_MP_GPIO_DATA,
+	CPIA2_CMD_ENABLE_PACKET_CTRL,
+	CPIA2_CMD_GET_FLICKER_MODES,
+	CPIA2_CMD_SET_FLICKER_MODES,
+	CPIA2_CMD_RESET_FIFO,	/* clear fifo and enable stream block */
+	CPIA2_CMD_SET_HI_POWER,
+	CPIA2_CMD_SET_LOW_POWER,
+	CPIA2_CMD_CLEAR_V2W_ERR,
+	CPIA2_CMD_SET_USER_MODE,
+	CPIA2_CMD_GET_USER_MODE,
+	CPIA2_CMD_FRAMERATE_REQ,
+	CPIA2_CMD_SET_COMPRESSION_STATE,
+	CPIA2_CMD_GET_WAKEUP,
+	CPIA2_CMD_SET_WAKEUP,
+	CPIA2_CMD_GET_PW_CONTROL,
+	CPIA2_CMD_SET_PW_CONTROL,
+	CPIA2_CMD_GET_SYSTEM_CTRL,
+	CPIA2_CMD_SET_SYSTEM_CTRL,
+	CPIA2_CMD_GET_VP_SYSTEM_STATE,
+	CPIA2_CMD_GET_VP_SYSTEM_CTRL,
+	CPIA2_CMD_SET_VP_SYSTEM_CTRL,
+	CPIA2_CMD_GET_VP_EXP_MODES,
+	CPIA2_CMD_SET_VP_EXP_MODES,
+	CPIA2_CMD_GET_DEVICE_CONFIG,
+	CPIA2_CMD_SET_DEVICE_CONFIG,
+	CPIA2_CMD_SET_SERIAL_ADDR,
+	CPIA2_CMD_SET_SENSOR_CR1,
+	CPIA2_CMD_GET_VC_CONTROL,
+	CPIA2_CMD_SET_VC_CONTROL,
+	CPIA2_CMD_SET_TARGET_KB,
+	CPIA2_CMD_SET_DEF_JPEG_OPT,
+	CPIA2_CMD_REHASH_VP4,
+	CPIA2_CMD_GET_USER_EFFECTS,
+	CPIA2_CMD_SET_USER_EFFECTS
+};
+
+enum user_cmd {
+	COMMAND_NONE = 0x00000001,
+	COMMAND_SET_FPS = 0x00000002,
+	COMMAND_SET_COLOR_PARAMS = 0x00000004,
+	COMMAND_GET_COLOR_PARAMS = 0x00000008,
+	COMMAND_SET_FORMAT = 0x00000010,	/* size, etc */
+	COMMAND_SET_FLICKER = 0x00000020
+};
+
+/***
+ * Some defines specific to the 676 chip
+ ***/
+#define CAMACC_CIF      0x01
+#define CAMACC_VGA      0x02
+#define CAMACC_QCIF     0x04
+#define CAMACC_QVGA     0x08
+
+
+struct cpia2_register {
+	u8 index;
+	u8 value;
+};
+
+struct cpia2_reg_mask {
+	u8 index;
+	u8 and_mask;
+	u8 or_mask;
+	u8 fill;
+};
+
+struct cpia2_command {
+	u32 command;
+	u8 req_mode;		/* (Block or random) | registerBank */
+	u8 reg_count;
+	u8 direction;
+	u8 start;
+	union reg_types {
+		struct cpia2_register registers[32];
+		struct cpia2_reg_mask masks[16];
+		u8 block_data[64];
+		u8 *patch_data;	/* points to function defined block */
+	} buffer;
+};
+
+struct camera_params {
+	struct {
+		u8 firmware_revision_hi; /* For system register set (bank 0) */
+		u8 firmware_revision_lo;
+		u8 asic_id;	/* Video Compressor set (bank 1) */
+		u8 asic_rev;
+		u8 vp_device_hi;	/* Video Processor set (bank 2) */
+		u8 vp_device_lo;
+		u8 sensor_flags;
+		u8 sensor_rev;
+	} version;
+
+	struct {
+		u32 device_type;     /* enumerated from vendor/product ids.
+				      * Currently, either STV_672 or STV_676 */
+		u16 vendor;
+		u16 product;
+		u16 device_revision;
+	} pnp_id;
+
+	struct {
+		u8 brightness;	/* CPIA2_VP_EXPOSURE_TARGET */
+		u8 contrast;	/* Note: this is CPIA2_VP_YRANGE */
+		u8 saturation;	/*  CPIA2_VP_SATURATION */
+	} color_params;
+
+	struct {
+		u8 cam_register;
+		u8 flicker_mode_req;	/* 1 if flicker on, else never flicker */
+		int mains_frequency;
+	} flicker_control;
+
+	struct {
+		u8 jpeg_options;
+		u8 creep_period;
+		u8 user_squeeze;
+		u8 inhibit_htables;
+	} compression;
+
+	struct {
+		u8 ohsize;	/* output image size */
+		u8 ovsize;
+		u8 hcrop;	/* cropping start_pos/4 */
+		u8 vcrop;
+		u8 hphase;	/* scaling registers */
+		u8 vphase;
+		u8 hispan;
+		u8 vispan;
+		u8 hicrop;
+		u8 vicrop;
+		u8 hifraction;
+		u8 vifraction;
+	} image_size;
+
+	struct {
+		int width;	/* actual window width */
+		int height;	/* actual window height */
+	} roi;
+
+	struct {
+		u8 video_mode;
+		u8 frame_rate;
+		u8 video_size;	/* Not a register, just a convenience for cropped sizes */
+		u8 gpio_direction;
+		u8 gpio_data;
+		u8 system_ctrl;
+		u8 system_state;
+		u8 lowlight_boost;	/* Bool: 0 = off, 1 = on */
+		u8 device_config;
+		u8 exposure_modes;
+		u8 user_effects;
+	} vp_params;
+
+	struct {
+		u8 pw_control;
+		u8 wakeup;
+		u8 vc_control;
+		u8 vc_mp_direction;
+		u8 vc_mp_data;
+		u8 target_kb;
+	} vc_params;
+
+	struct {
+		u8 power_mode;
+		u8 system_ctrl;
+		u8 stream_mode;	/* This is the current alternate for usb drivers */
+		u8 allow_corrupt;
+	} camera_state;
+};
+
+#define NUM_SBUF    2
+
+struct cpia2_sbuf {
+	char *data;
+	struct urb *urb;
+};
+
+struct framebuf {
+	struct timeval timestamp;
+	unsigned long seq;
+	int num;
+	int length;
+	int max_length;
+	volatile enum frame_status status;
+	u8 *data;
+	struct framebuf *next;
+};
+
+struct cpia2_fh {
+	enum v4l2_priority prio;
+	u8 mmapped;
+};
+
+struct camera_data {
+	/* locks */
+	struct mutex v4l2_lock;	/* serialize file operations */
+	struct v4l2_prio_state prio;
+
+	/* camera status */
+	volatile int present;	/* Is the camera still present? */
+	int open_count;		/* # of process that have camera open */
+	int first_image_seen;
+	u8 mains_freq;		/* for flicker control */
+	enum sensors sensor_type;
+	u8 flush;
+	u8 mmapped;
+	int streaming;		/* 0 = no, 1 = yes */
+	int xfer_mode;		/* XFER_BULK or XFER_ISOC */
+	struct camera_params params;	/* camera settings */
+
+	/* v4l */
+	int video_size;			/* VIDEO_SIZE_ */
+	struct video_device *vdev;	/* v4l videodev */
+	u32 width;
+	u32 height;			/* Its size */
+	__u32 pixelformat;       /* Format fourcc      */
+
+	/* USB */
+	struct usb_device *dev;
+	unsigned char iface;
+	unsigned int cur_alt;
+	unsigned int old_alt;
+	struct cpia2_sbuf sbuf[NUM_SBUF];	/* Double buffering */
+
+	wait_queue_head_t wq_stream;
+
+	/* Buffering */
+	u32 frame_size;
+	int num_frames;
+	unsigned long frame_count;
+	u8 *frame_buffer;	/* frame buffer data */
+	struct framebuf *buffers;
+	struct framebuf * volatile curbuff;
+	struct framebuf *workbuff;
+
+	/* MJPEG Extension */
+	int APPn;		/* Number of APP segment to be written, must be 0..15 */
+	int APP_len;		/* Length of data in JPEG APPn segment */
+	char APP_data[60];	/* Data in the JPEG APPn segment. */
+
+	int COM_len;		/* Length of data in JPEG COM segment */
+	char COM_data[60];	/* Data in JPEG COM segment */
+};
+
+/* v4l */
+int cpia2_register_camera(struct camera_data *cam);
+void cpia2_unregister_camera(struct camera_data *cam);
+
+/* core */
+int cpia2_reset_camera(struct camera_data *cam);
+int cpia2_set_low_power(struct camera_data *cam);
+void cpia2_dbg_dump_registers(struct camera_data *cam);
+int cpia2_match_video_size(int width, int height);
+void cpia2_set_camera_state(struct camera_data *cam);
+void cpia2_save_camera_state(struct camera_data *cam);
+void cpia2_set_color_params(struct camera_data *cam);
+void cpia2_set_brightness(struct camera_data *cam, unsigned char value);
+void cpia2_set_contrast(struct camera_data *cam, unsigned char value);
+void cpia2_set_saturation(struct camera_data *cam, unsigned char value);
+int cpia2_set_flicker_mode(struct camera_data *cam, int mode);
+void cpia2_set_format(struct camera_data *cam);
+int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd);
+int cpia2_do_command(struct camera_data *cam,
+		     unsigned int command,
+		     unsigned char direction, unsigned char param);
+struct camera_data *cpia2_init_camera_struct(void);
+int cpia2_init_camera(struct camera_data *cam);
+int cpia2_allocate_buffers(struct camera_data *cam);
+void cpia2_free_buffers(struct camera_data *cam);
+long cpia2_read(struct camera_data *cam,
+		char __user *buf, unsigned long count, int noblock);
+unsigned int cpia2_poll(struct camera_data *cam,
+			struct file *filp, poll_table *wait);
+int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma);
+void cpia2_set_property_flip(struct camera_data *cam, int prop_val);
+void cpia2_set_property_mirror(struct camera_data *cam, int prop_val);
+int cpia2_set_target_kb(struct camera_data *cam, unsigned char value);
+int cpia2_set_gpio(struct camera_data *cam, unsigned char setting);
+int cpia2_set_fps(struct camera_data *cam, int framerate);
+
+/* usb */
+int cpia2_usb_init(void);
+void cpia2_usb_cleanup(void);
+int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers,
+			   u8 request, u8 start, u8 count, u8 direction);
+int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate);
+int cpia2_usb_stream_stop(struct camera_data *cam);
+int cpia2_usb_stream_pause(struct camera_data *cam);
+int cpia2_usb_stream_resume(struct camera_data *cam);
+int cpia2_usb_change_streaming_alternate(struct camera_data *cam,
+					 unsigned int alt);
+
+
+/* ----------------------- debug functions ---------------------- */
+#ifdef _CPIA2_DEBUG_
+#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args)
+#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args)
+#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args)
+#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args)
+#else
+#define ALOG(fmt,args...) printk(fmt,##args)
+#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args)
+#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args)
+#define DBG(fmn,args...) do {} while(0)
+#endif
+/* No function or lineno, for shorter lines */
+#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args)
+
+#endif