Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 484 insertions, 0 deletions

diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h
new file mode 100644
index 00000000..aa899a0b
--- /dev/null
+++ b/drivers/media/rc/ite-cir.h
@@ -0,0 +1,484 @@
+/*
+ * Driver for ITE Tech Inc. IT8712F/IT8512F CIR
+ *
+ * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA.
+ */
+
+/* platform driver name to register */
+#define ITE_DRIVER_NAME "ite-cir"
+
+/* logging macros */
+#define ite_pr(level, text, ...) \
+	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+#define ite_dbg(text, ...) do { \
+	if (debug) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
+} while (0)
+
+#define ite_dbg_verbose(text, ...) do {\
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
+} while (0)
+
+/* FIFO sizes */
+#define ITE_TX_FIFO_LEN 32
+#define ITE_RX_FIFO_LEN 32
+
+/* interrupt types */
+#define ITE_IRQ_TX_FIFO        1
+#define ITE_IRQ_RX_FIFO        2
+#define ITE_IRQ_RX_FIFO_OVERRUN    4
+
+/* forward declaration */
+struct ite_dev;
+
+/* struct for storing the parameters of different recognized devices */
+struct ite_dev_params {
+	/* model of the device */
+	const char *model;
+
+	/* size of the I/O region */
+	int io_region_size;
+
+	/* IR pnp I/O resource number */
+	int io_rsrc_no;
+
+	/* true if the hardware supports transmission */
+	bool hw_tx_capable;
+
+	/* base sampling period, in ns */
+	u32 sample_period;
+
+	/* rx low carrier frequency, in Hz, 0 means no demodulation */
+	unsigned int rx_low_carrier_freq;
+
+	/* tx high carrier frequency, in Hz, 0 means no demodulation */
+	unsigned int rx_high_carrier_freq;
+
+	/* tx carrier frequency, in Hz */
+	unsigned int tx_carrier_freq;
+
+	/* duty cycle, 0-100 */
+	int tx_duty_cycle;
+
+	/* hw-specific operation function pointers; most of these must be
+	 * called while holding the spin lock, except for the TX FIFO length
+	 * one */
+	/* get pending interrupt causes */
+	int (*get_irq_causes) (struct ite_dev *dev);
+
+	/* enable rx */
+	void (*enable_rx) (struct ite_dev *dev);
+
+	/* make rx enter the idle state; keep listening for a pulse, but stop
+	 * streaming space bytes */
+	void (*idle_rx) (struct ite_dev *dev);
+
+	/* disable rx completely */
+	void (*disable_rx) (struct ite_dev *dev);
+
+	/* read bytes from RX FIFO; return read count */
+	int (*get_rx_bytes) (struct ite_dev *dev, u8 *buf, int buf_size);
+
+	/* enable tx FIFO space available interrupt */
+	void (*enable_tx_interrupt) (struct ite_dev *dev);
+
+	/* disable tx FIFO space available interrupt */
+	void (*disable_tx_interrupt) (struct ite_dev *dev);
+
+	/* get number of full TX FIFO slots */
+	int (*get_tx_used_slots) (struct ite_dev *dev);
+
+	/* put a byte to the TX FIFO */
+	void (*put_tx_byte) (struct ite_dev *dev, u8 value);
+
+	/* disable hardware completely */
+	void (*disable) (struct ite_dev *dev);
+
+	/* initialize the hardware */
+	void (*init_hardware) (struct ite_dev *dev);
+
+	/* set the carrier parameters */
+	void (*set_carrier_params) (struct ite_dev *dev, bool high_freq,
+				    bool use_demodulator, u8 carrier_freq_bits,
+				    u8 allowance_bits, u8 pulse_width_bits);
+};
+
+/* ITE CIR device structure */
+struct ite_dev {
+	struct pnp_dev *pdev;
+	struct rc_dev *rdev;
+	struct ir_raw_event rawir;
+
+	/* sync data */
+	spinlock_t lock;
+	bool in_use, transmitting;
+
+	/* transmit support */
+	int tx_fifo_allowance;
+	wait_queue_head_t tx_queue, tx_ended;
+
+	/* hardware I/O settings */
+	unsigned long cir_addr;
+	int cir_irq;
+
+	/* overridable copy of model parameters */
+	struct ite_dev_params params;
+};
+
+/* common values for all kinds of hardware */
+
+/* baud rate divisor default */
+#define ITE_BAUDRATE_DIVISOR		1
+
+/* low-speed carrier frequency limits (Hz) */
+#define ITE_LCF_MIN_CARRIER_FREQ	27000
+#define ITE_LCF_MAX_CARRIER_FREQ	58000
+
+/* high-speed carrier frequency limits (Hz) */
+#define ITE_HCF_MIN_CARRIER_FREQ	400000
+#define ITE_HCF_MAX_CARRIER_FREQ	500000
+
+/* default carrier freq for when demodulator is off (Hz) */
+#define ITE_DEFAULT_CARRIER_FREQ	38000
+
+/* default idling timeout in ns (0.2 seconds) */
+#define ITE_IDLE_TIMEOUT		200000000UL
+
+/* limit timeout values */
+#define ITE_MIN_IDLE_TIMEOUT		100000000UL
+#define ITE_MAX_IDLE_TIMEOUT		1000000000UL
+
+/* convert bits to us */
+#define ITE_BITS_TO_NS(bits, sample_period) \
+((u32) ((bits) * ITE_BAUDRATE_DIVISOR * sample_period))
+
+/*
+ * n in RDCR produces a tolerance of +/- n * 6.25% around the center
+ * carrier frequency...
+ *
+ * From two limit frequencies, L (low) and H (high), we can get both the
+ * center frequency F = (L + H) / 2 and the variation from the center
+ * frequency A = (H - L) / (H + L). We can use this in order to honor the
+ * s_rx_carrier_range() call in ir-core. We'll suppose that any request
+ * setting L=0 means we must shut down the demodulator.
+ */
+#define ITE_RXDCR_PER_10000_STEP 625
+
+/* high speed carrier freq values */
+#define ITE_CFQ_400		0x03
+#define ITE_CFQ_450		0x08
+#define ITE_CFQ_480		0x0b
+#define ITE_CFQ_500		0x0d
+
+/* values for pulse widths */
+#define ITE_TXMPW_A		0x02
+#define ITE_TXMPW_B		0x03
+#define ITE_TXMPW_C		0x04
+#define ITE_TXMPW_D		0x05
+#define ITE_TXMPW_E		0x06
+
+/* values for demodulator carrier range allowance */
+#define ITE_RXDCR_DEFAULT	0x01	/* default carrier range */
+#define ITE_RXDCR_MAX		0x07	/* default carrier range */
+
+/* DR TX bits */
+#define ITE_TX_PULSE		0x00
+#define ITE_TX_SPACE		0x80
+#define ITE_TX_MAX_RLE		0x80
+#define ITE_TX_RLE_MASK		0x7f
+
+/*
+ * IT8712F
+ *
+ * hardware data obtained from:
+ *
+ * IT8712F
+ * Environment Control – Low Pin Count Input / Output
+ * (EC - LPC I/O)
+ * Preliminary Specification V0. 81
+ */
+
+/* register offsets */
+#define IT87_DR		0x00	/* data register */
+#define IT87_IER	0x01	/* interrupt enable register */
+#define IT87_RCR	0x02	/* receiver control register */
+#define IT87_TCR1	0x03	/* transmitter control register 1 */
+#define IT87_TCR2	0x04	/* transmitter control register 2 */
+#define IT87_TSR	0x05	/* transmitter status register */
+#define IT87_RSR	0x06	/* receiver status register */
+#define IT87_BDLR	0x05	/* baud rate divisor low byte register */
+#define IT87_BDHR	0x06	/* baud rate divisor high byte register */
+#define IT87_IIR	0x07	/* interrupt identification register */
+
+#define IT87_IOREG_LENGTH 0x08	/* length of register file */
+
+/* IER bits */
+#define IT87_TLDLIE	0x01	/* transmitter low data interrupt enable */
+#define IT87_RDAIE	0x02	/* receiver data available interrupt enable */
+#define IT87_RFOIE	0x04	/* receiver FIFO overrun interrupt enable */
+#define IT87_IEC	0x08	/* interrupt enable control */
+#define IT87_BR		0x10	/* baud rate register enable */
+#define IT87_RESET	0x20	/* reset */
+
+/* RCR bits */
+#define IT87_RXDCR	0x07	/* receiver demodulation carrier range mask */
+#define IT87_RXACT	0x08	/* receiver active */
+#define IT87_RXEND	0x10	/* receiver demodulation enable */
+#define IT87_RXEN	0x20	/* receiver enable */
+#define IT87_HCFS	0x40	/* high-speed carrier frequency select */
+#define IT87_RDWOS	0x80	/* receiver data without sync */
+
+/* TCR1 bits */
+#define IT87_TXMPM	0x03	/* transmitter modulation pulse mode mask */
+#define IT87_TXMPM_DEFAULT 0x00	/* modulation pulse mode default */
+#define IT87_TXENDF	0x04	/* transmitter deferral */
+#define IT87_TXRLE	0x08	/* transmitter run length enable */
+#define IT87_FIFOTL	0x30	/* FIFO level threshold mask */
+#define IT87_FIFOTL_DEFAULT 0x20	/* FIFO level threshold default
+					 * 0x00 -> 1, 0x10 -> 7, 0x20 -> 17,
+					 * 0x30 -> 25 */
+#define IT87_ILE	0x40	/* internal loopback enable */
+#define IT87_FIFOCLR	0x80	/* FIFO clear bit */
+
+/* TCR2 bits */
+#define IT87_TXMPW	0x07	/* transmitter modulation pulse width mask */
+#define IT87_TXMPW_DEFAULT 0x04	/* default modulation pulse width */
+#define IT87_CFQ	0xf8	/* carrier frequency mask */
+#define IT87_CFQ_SHIFT	3	/* carrier frequency bit shift */
+
+/* TSR bits */
+#define IT87_TXFBC	0x3f	/* transmitter FIFO byte count mask */
+
+/* RSR bits */
+#define IT87_RXFBC	0x3f	/* receiver FIFO byte count mask */
+#define IT87_RXFTO	0x80	/* receiver FIFO time-out */
+
+/* IIR bits */
+#define IT87_IP		0x01	/* interrupt pending */
+#define IT87_II		0x06	/* interrupt identification mask */
+#define IT87_II_NOINT	0x00	/* no interrupt */
+#define IT87_II_TXLDL	0x02	/* transmitter low data level */
+#define IT87_II_RXDS	0x04	/* receiver data stored */
+#define IT87_II_RXFO	0x06	/* receiver FIFO overrun */
+
+/*
+ * IT8512E/F
+ *
+ * Hardware data obtained from:
+ *
+ * IT8512E/F
+ * Embedded Controller
+ * Preliminary Specification V0.4.1
+ *
+ * Note that the CIR registers are not directly available to the host, because
+ * they only are accessible to the integrated microcontroller. Thus, in order
+ * use it, some kind of bridging is required. As the bridging may depend on
+ * the controller firmware in use, we are going to use the PNP ID in order to
+ * determine the strategy and ports available. See after these generic
+ * IT8512E/F register definitions for register definitions for those
+ * strategies.
+ */
+
+/* register offsets */
+#define IT85_C0DR	0x00	/* data register */
+#define IT85_C0MSTCR	0x01	/* master control register */
+#define IT85_C0IER	0x02	/* interrupt enable register */
+#define IT85_C0IIR	0x03	/* interrupt identification register */
+#define IT85_C0CFR	0x04	/* carrier frequency register */
+#define IT85_C0RCR	0x05	/* receiver control register */
+#define IT85_C0TCR	0x06	/* transmitter control register */
+#define IT85_C0SCK	0x07	/* slow clock control register */
+#define IT85_C0BDLR	0x08	/* baud rate divisor low byte register */
+#define IT85_C0BDHR	0x09	/* baud rate divisor high byte register */
+#define IT85_C0TFSR	0x0a	/* transmitter FIFO status register */
+#define IT85_C0RFSR	0x0b	/* receiver FIFO status register */
+#define IT85_C0WCL	0x0d	/* wakeup code length register */
+#define IT85_C0WCR	0x0e	/* wakeup code read/write register */
+#define IT85_C0WPS	0x0f	/* wakeup power control/status register */
+
+#define IT85_IOREG_LENGTH 0x10	/* length of register file */
+
+/* C0MSTCR bits */
+#define IT85_RESET	0x01	/* reset */
+#define IT85_FIFOCLR	0x02	/* FIFO clear bit */
+#define IT85_FIFOTL	0x0c	/* FIFO level threshold mask */
+#define IT85_FIFOTL_DEFAULT 0x08	/* FIFO level threshold default
+					 * 0x00 -> 1, 0x04 -> 7, 0x08 -> 17,
+					 * 0x0c -> 25 */
+#define IT85_ILE	0x10	/* internal loopback enable */
+#define IT85_ILSEL	0x20	/* internal loopback select */
+
+/* C0IER bits */
+#define IT85_TLDLIE	0x01	/* TX low data level interrupt enable */
+#define IT85_RDAIE	0x02	/* RX data available interrupt enable */
+#define IT85_RFOIE	0x04	/* RX FIFO overrun interrupt enable */
+#define IT85_IEC	0x80	/* interrupt enable function control */
+
+/* C0IIR bits */
+#define IT85_TLDLI	0x01	/* transmitter low data level interrupt */
+#define IT85_RDAI	0x02	/* receiver data available interrupt */
+#define IT85_RFOI	0x04	/* receiver FIFO overrun interrupt */
+#define IT85_NIP	0x80	/* no interrupt pending */
+
+/* C0CFR bits */
+#define IT85_CFQ	0x1f	/* carrier frequency mask */
+#define IT85_HCFS	0x20	/* high speed carrier frequency select */
+
+/* C0RCR bits */
+#define IT85_RXDCR	0x07	/* receiver demodulation carrier range mask */
+#define IT85_RXACT	0x08	/* receiver active */
+#define IT85_RXEND	0x10	/* receiver demodulation enable */
+#define IT85_RDWOS	0x20	/* receiver data without sync */
+#define IT85_RXEN	0x80	/* receiver enable */
+
+/* C0TCR bits */
+#define IT85_TXMPW	0x07	/* transmitter modulation pulse width mask */
+#define IT85_TXMPW_DEFAULT 0x04	/* default modulation pulse width */
+#define IT85_TXMPM	0x18	/* transmitter modulation pulse mode mask */
+#define IT85_TXMPM_DEFAULT 0x00	/* modulation pulse mode default */
+#define IT85_TXENDF	0x20	/* transmitter deferral */
+#define IT85_TXRLE	0x40	/* transmitter run length enable */
+
+/* C0SCK bits */
+#define IT85_SCKS	0x01	/* slow clock select */
+#define IT85_TXDCKG	0x02	/* TXD clock gating */
+#define IT85_DLL1P8E	0x04	/* DLL 1.8432M enable */
+#define IT85_DLLTE	0x08	/* DLL test enable */
+#define IT85_BRCM	0x70	/* baud rate count mode */
+#define IT85_DLLOCK	0x80	/* DLL lock */
+
+/* C0TFSR bits */
+#define IT85_TXFBC	0x3f	/* transmitter FIFO count mask */
+
+/* C0RFSR bits */
+#define IT85_RXFBC	0x3f	/* receiver FIFO count mask */
+#define IT85_RXFTO	0x80	/* receiver FIFO time-out */
+
+/* C0WCL bits */
+#define IT85_WCL	0x3f	/* wakeup code length mask */
+
+/* C0WPS bits */
+#define IT85_CIRPOSIE	0x01	/* power on/off status interrupt enable */
+#define IT85_CIRPOIS	0x02	/* power on/off interrupt status */
+#define IT85_CIRPOII	0x04	/* power on/off interrupt identification */
+#define IT85_RCRST	0x10	/* wakeup code reading counter reset bit */
+#define IT85_WCRST	0x20	/* wakeup code writing counter reset bit */
+
+/*
+ * ITE8708
+ *
+ * Hardware data obtained from hacked driver for IT8512 in this forum post:
+ *
+ *  http://ubuntuforums.org/showthread.php?t=1028640
+ *
+ * Although there's no official documentation for that driver, analysis would
+ * suggest that it maps the 16 registers of IT8512 onto two 8-register banks,
+ * selectable by a single bank-select bit that's mapped onto both banks. The
+ * IT8512 registers are mapped in a different order, so that the first bank
+ * maps the ones that are used more often, and two registers that share a
+ * reserved high-order bit are placed at the same offset in both banks in
+ * order to reuse the reserved bit as the bank select bit.
+ */
+
+/* register offsets */
+
+/* mapped onto both banks */
+#define IT8708_BANKSEL	0x07	/* bank select register */
+#define IT8708_HRAE	0x80	/* high registers access enable */
+
+/* mapped onto the low bank */
+#define IT8708_C0DR	0x00	/* data register */
+#define IT8708_C0MSTCR	0x01	/* master control register */
+#define IT8708_C0IER	0x02	/* interrupt enable register */
+#define IT8708_C0IIR	0x03	/* interrupt identification register */
+#define IT8708_C0RFSR	0x04	/* receiver FIFO status register */
+#define IT8708_C0RCR	0x05	/* receiver control register */
+#define IT8708_C0TFSR	0x06	/* transmitter FIFO status register */
+#define IT8708_C0TCR	0x07	/* transmitter control register */
+
+/* mapped onto the high bank */
+#define IT8708_C0BDLR	0x01	/* baud rate divisor low byte register */
+#define IT8708_C0BDHR	0x02	/* baud rate divisor high byte register */
+#define IT8708_C0CFR	0x04	/* carrier frequency register */
+
+/* registers whose bank mapping we don't know, since they weren't being used
+ * in the hacked driver... most probably they belong to the high bank too,
+ * since they fit in the holes the other registers leave */
+#define IT8708_C0SCK	0x03	/* slow clock control register */
+#define IT8708_C0WCL	0x05	/* wakeup code length register */
+#define IT8708_C0WCR	0x06	/* wakeup code read/write register */
+#define IT8708_C0WPS	0x07	/* wakeup power control/status register */
+
+#define IT8708_IOREG_LENGTH 0x08	/* length of register file */
+
+/* two more registers that are defined in the hacked driver, but can't be
+ * found in the data sheets; no idea what they are or how they are accessed,
+ * since the hacked driver doesn't seem to use them */
+#define IT8708_CSCRR	0x00
+#define IT8708_CGPINTR	0x01
+
+/* CSCRR bits */
+#define IT8708_CSCRR_SCRB 0x3f
+#define IT8708_CSCRR_PM	0x80
+
+/* CGPINTR bits */
+#define IT8708_CGPINT	0x01
+
+/*
+ * ITE8709
+ *
+ * Hardware interfacing data obtained from the original lirc_ite8709 driver.
+ * Verbatim from its sources:
+ *
+ * The ITE8709 device seems to be the combination of IT8512 superIO chip and
+ * a specific firmware running on the IT8512's embedded micro-controller.
+ * In addition of the embedded micro-controller, the IT8512 chip contains a
+ * CIR module and several other modules. A few modules are directly accessible
+ * by the host CPU, but most of them are only accessible by the
+ * micro-controller. The CIR module is only accessible by the
+ * micro-controller.
+ *
+ * The battery-backed SRAM module is accessible by the host CPU and the
+ * micro-controller. So one of the MC's firmware role is to act as a bridge
+ * between the host CPU and the CIR module. The firmware implements a kind of
+ * communication protocol using the SRAM module as a shared memory. The IT8512
+ * specification is publicly available on ITE's web site, but the
+ * communication protocol is not, so it was reverse-engineered.
+ */
+
+/* register offsets */
+#define IT8709_RAM_IDX	0x00	/* index into the SRAM module bytes */
+#define IT8709_RAM_VAL	0x01	/* read/write data to the indexed byte */
+
+#define IT8709_IOREG_LENGTH 0x02	/* length of register file */
+
+/* register offsets inside the SRAM module */
+#define IT8709_MODE	0x1a	/* request/ack byte */
+#define IT8709_REG_IDX	0x1b	/* index of the CIR register to access */
+#define IT8709_REG_VAL	0x1c	/* value read/to be written */
+#define IT8709_IIR	0x1e	/* interrupt identification register */
+#define IT8709_RFSR	0x1f	/* receiver FIFO status register */
+#define IT8709_FIFO	0x20	/* start of in RAM RX FIFO copy */
+
+/* MODE values */
+#define IT8709_IDLE	0x00
+#define IT8709_WRITE	0x01
+#define IT8709_READ	0x02