Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 186 insertions, 0 deletions

diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
new file mode 100644
index 00000000..177bcbd7
--- /dev/null
+++ b/drivers/media/radio/radio-aztech.c
@@ -0,0 +1,186 @@
+/*
+ * radio-aztech.c - Aztech radio card driver
+ *
+ * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@xs4all.nl>
+ * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
+ * Adapted to support the Video for Linux API by
+ * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
+ *
+ * Quay Ly
+ * Donald Song
+ * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
+ * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
+ * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
+ *
+ * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
+*/
+
+#include <linux/module.h>	/* Modules 			*/
+#include <linux/init.h>		/* Initdata			*/
+#include <linux/ioport.h>	/* request_region		*/
+#include <linux/delay.h>	/* udelay			*/
+#include <linux/videodev2.h>	/* kernel radio structs		*/
+#include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include "radio-isa.h"
+
+MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
+MODULE_DESCRIPTION("A driver for the Aztech radio card.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
+
+/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
+#ifndef CONFIG_RADIO_AZTECH_PORT
+#define CONFIG_RADIO_AZTECH_PORT -1
+#endif
+
+#define AZTECH_MAX 2
+
+static int io[AZTECH_MAX] = { [0] = CONFIG_RADIO_AZTECH_PORT,
+			      [1 ... (AZTECH_MAX - 1)] = -1 };
+static int radio_nr[AZTECH_MAX]	= { [0 ... (AZTECH_MAX - 1)] = -1 };
+static const int radio_wait_time = 1000;
+
+module_param_array(io, int, NULL, 0444);
+MODULE_PARM_DESC(io, "I/O addresses of the Aztech card (0x350 or 0x358)");
+module_param_array(radio_nr, int, NULL, 0444);
+MODULE_PARM_DESC(radio_nr, "Radio device numbers");
+
+struct aztech {
+	struct radio_isa_card isa;
+	int curvol;
+};
+
+static void send_0_byte(struct aztech *az)
+{
+	udelay(radio_wait_time);
+	outb_p(2 + az->curvol, az->isa.io);
+	outb_p(64 + 2 + az->curvol, az->isa.io);
+}
+
+static void send_1_byte(struct aztech *az)
+{
+	udelay(radio_wait_time);
+	outb_p(128 + 2 + az->curvol, az->isa.io);
+	outb_p(128 + 64 + 2 + az->curvol, az->isa.io);
+}
+
+static struct radio_isa_card *aztech_alloc(void)
+{
+	struct aztech *az = kzalloc(sizeof(*az), GFP_KERNEL);
+
+	return az ? &az->isa : NULL;
+}
+
+static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq)
+{
+	struct aztech *az = container_of(isa, struct aztech, isa);
+	int  i;
+
+	freq += 171200;			/* Add 10.7 MHz IF		*/
+	freq /= 800;			/* Convert to 50 kHz units	*/
+
+	send_0_byte(az);		/*  0: LSB of frequency       */
+
+	for (i = 0; i < 13; i++)	/*   : frequency bits (1-13)  */
+		if (freq & (1 << i))
+			send_1_byte(az);
+		else
+			send_0_byte(az);
+
+	send_0_byte(az);		/* 14: test bit - always 0    */
+	send_0_byte(az);		/* 15: test bit - always 0    */
+	send_0_byte(az);		/* 16: band data 0 - always 0 */
+	if (isa->stereo)		/* 17: stereo (1 to enable)   */
+		send_1_byte(az);
+	else
+		send_0_byte(az);
+
+	send_1_byte(az);		/* 18: band data 1 - unknown  */
+	send_0_byte(az);		/* 19: time base - always 0   */
+	send_0_byte(az);		/* 20: spacing (0 = 25 kHz)   */
+	send_1_byte(az);		/* 21: spacing (1 = 25 kHz)   */
+	send_0_byte(az);		/* 22: spacing (0 = 25 kHz)   */
+	send_1_byte(az);		/* 23: AM/FM (FM = 1, always) */
+
+	/* latch frequency */
+
+	udelay(radio_wait_time);
+	outb_p(128 + 64 + az->curvol, az->isa.io);
+
+	return 0;
+}
+
+/* thanks to Michael Dwyer for giving me a dose of clues in
+ * the signal strength department..
+ *
+ * This card has a stereo bit - bit 0 set = mono, not set = stereo
+ */
+static u32 aztech_g_rxsubchans(struct radio_isa_card *isa)
+{
+	if (inb(isa->io) & 1)
+		return V4L2_TUNER_SUB_MONO;
+	return V4L2_TUNER_SUB_STEREO;
+}
+
+static int aztech_s_stereo(struct radio_isa_card *isa, bool stereo)
+{
+	return aztech_s_frequency(isa, isa->freq);
+}
+
+static int aztech_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
+{
+	struct aztech *az = container_of(isa, struct aztech, isa);
+
+	if (mute)
+		vol = 0;
+	az->curvol = (vol & 1) + ((vol & 2) << 1);
+	outb(az->curvol, isa->io);
+	return 0;
+}
+
+static const struct radio_isa_ops aztech_ops = {
+	.alloc = aztech_alloc,
+	.s_mute_volume = aztech_s_mute_volume,
+	.s_frequency = aztech_s_frequency,
+	.s_stereo = aztech_s_stereo,
+	.g_rxsubchans = aztech_g_rxsubchans,
+};
+
+static const int aztech_ioports[] = { 0x350, 0x358 };
+
+static struct radio_isa_driver aztech_driver = {
+	.driver = {
+		.match		= radio_isa_match,
+		.probe		= radio_isa_probe,
+		.remove		= radio_isa_remove,
+		.driver		= {
+			.name	= "radio-aztech",
+		},
+	},
+	.io_params = io,
+	.radio_nr_params = radio_nr,
+	.io_ports = aztech_ioports,
+	.num_of_io_ports = ARRAY_SIZE(aztech_ioports),
+	.region_size = 2,
+	.card = "Aztech Radio",
+	.ops = &aztech_ops,
+	.has_stereo = true,
+	.max_volume = 3,
+};
+
+static int __init aztech_init(void)
+{
+	return isa_register_driver(&aztech_driver.driver, AZTECH_MAX);
+}
+
+static void __exit aztech_exit(void)
+{
+	isa_unregister_driver(&aztech_driver.driver);
+}
+
+module_init(aztech_init);
+module_exit(aztech_exit);