Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 496 insertions, 0 deletions

diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
new file mode 100644
index 00000000..ceccab44
--- /dev/null
+++ b/drivers/leds/leds-pca9532.c
@@ -0,0 +1,496 @@
+/*
+ * pca9532.c - 16-bit Led dimmer
+ *
+ * Copyright (C) 2011 Jan Weitzel
+ * Copyright (C) 2008 Riku Voipio
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * Datasheet: http://www.nxp.com/documents/data_sheet/PCA9532.pdf
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/leds-pca9532.h>
+#include <linux/gpio.h>
+
+/* m =  num_leds*/
+#define PCA9532_REG_INPUT(i)	((i) >> 3)
+#define PCA9532_REG_OFFSET(m)	((m) >> 4)
+#define PCA9532_REG_PSC(m, i)	(PCA9532_REG_OFFSET(m) + 0x1 + (i) * 2)
+#define PCA9532_REG_PWM(m, i)	(PCA9532_REG_OFFSET(m) + 0x2 + (i) * 2)
+#define LED_REG(m, led)		(PCA9532_REG_OFFSET(m) + 0x5 + (led >> 2))
+#define LED_NUM(led)		(led & 0x3)
+
+#define ldev_to_led(c)       container_of(c, struct pca9532_led, ldev)
+
+struct pca9532_chip_info {
+	u8	num_leds;
+};
+
+struct pca9532_data {
+	struct i2c_client *client;
+	struct pca9532_led leds[16];
+	struct mutex update_lock;
+	struct input_dev *idev;
+	struct work_struct work;
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	struct gpio_chip gpio;
+#endif
+	const struct pca9532_chip_info *chip_info;
+	u8 pwm[2];
+	u8 psc[2];
+};
+
+static int pca9532_probe(struct i2c_client *client,
+	const struct i2c_device_id *id);
+static int pca9532_remove(struct i2c_client *client);
+
+enum {
+	pca9530,
+	pca9531,
+	pca9532,
+	pca9533,
+};
+
+static const struct i2c_device_id pca9532_id[] = {
+	{ "pca9530", pca9530 },
+	{ "pca9531", pca9531 },
+	{ "pca9532", pca9532 },
+	{ "pca9533", pca9533 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9532_id);
+
+static const struct pca9532_chip_info pca9532_chip_info_tbl[] = {
+	[pca9530] = {
+		.num_leds = 2,
+	},
+	[pca9531] = {
+		.num_leds = 8,
+	},
+	[pca9532] = {
+		.num_leds = 16,
+	},
+	[pca9533] = {
+		.num_leds = 4,
+	},
+};
+
+static struct i2c_driver pca9532_driver = {
+	.driver = {
+		.name = "leds-pca953x",
+	},
+	.probe = pca9532_probe,
+	.remove = pca9532_remove,
+	.id_table = pca9532_id,
+};
+
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
+ * the clever Thecus people are using one pwm to drive the beeper. So,
+ * as a compromise we average one pwm to the values requested by all
+ * leds that are not ON/OFF.
+ * */
+static int pca9532_calcpwm(struct i2c_client *client, int pwm, int blink,
+	enum led_brightness value)
+{
+	int a = 0, b = 0, i = 0;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	for (i = 0; i < data->chip_info->num_leds; i++) {
+		if (data->leds[i].type == PCA9532_TYPE_LED &&
+			data->leds[i].state == PCA9532_PWM0+pwm) {
+				a++;
+				b += data->leds[i].ldev.brightness;
+		}
+	}
+	if (a == 0) {
+		dev_err(&client->dev,
+		"fear of division by zero %d/%d, wanted %d\n",
+			b, a, value);
+		return -EINVAL;
+	}
+	b = b/a;
+	if (b > 0xFF)
+		return -EINVAL;
+	data->pwm[pwm] = b;
+	data->psc[pwm] = blink;
+	return 0;
+}
+
+static int pca9532_setpwm(struct i2c_client *client, int pwm)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, pwm),
+		data->pwm[pwm]);
+	i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, pwm),
+		data->psc[pwm]);
+	mutex_unlock(&data->update_lock);
+	return 0;
+}
+
+/* Set LED routing */
+static void pca9532_setled(struct pca9532_led *led)
+{
+	struct i2c_client *client = led->client;
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	u8 maxleds = data->chip_info->num_leds;
+	char reg;
+
+	mutex_lock(&data->update_lock);
+	reg = i2c_smbus_read_byte_data(client, LED_REG(maxleds, led->id));
+	/* zero led bits */
+	reg = reg & ~(0x3<<LED_NUM(led->id)*2);
+	/* set the new value */
+	reg = reg | (led->state << LED_NUM(led->id)*2);
+	i2c_smbus_write_byte_data(client, LED_REG(maxleds, led->id), reg);
+	mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_set_brightness(struct led_classdev *led_cdev,
+	enum led_brightness value)
+{
+	int err = 0;
+	struct pca9532_led *led = ldev_to_led(led_cdev);
+
+	if (value == LED_OFF)
+		led->state = PCA9532_OFF;
+	else if (value == LED_FULL)
+		led->state = PCA9532_ON;
+	else {
+		led->state = PCA9532_PWM0; /* Thecus: hardcode one pwm */
+		err = pca9532_calcpwm(led->client, 0, 0, value);
+		if (err)
+			return; /* XXX: led api doesn't allow error code? */
+	}
+	schedule_work(&led->work);
+}
+
+static int pca9532_set_blink(struct led_classdev *led_cdev,
+	unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct pca9532_led *led = ldev_to_led(led_cdev);
+	struct i2c_client *client = led->client;
+	int psc;
+	int err = 0;
+
+	if (*delay_on == 0 && *delay_off == 0) {
+	/* led subsystem ask us for a blink rate */
+		*delay_on = 1000;
+		*delay_off = 1000;
+	}
+	if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
+		return -EINVAL;
+
+	/* Thecus specific: only use PSC/PWM 0 */
+	psc = (*delay_on * 152-1)/1000;
+	err = pca9532_calcpwm(client, 0, psc, led_cdev->brightness);
+	if (err)
+		return err;
+	schedule_work(&led->work);
+	return 0;
+}
+
+static int pca9532_event(struct input_dev *dev, unsigned int type,
+	unsigned int code, int value)
+{
+	struct pca9532_data *data = input_get_drvdata(dev);
+
+	if (!(type == EV_SND && (code == SND_BELL || code == SND_TONE)))
+		return -1;
+
+	/* XXX: allow different kind of beeps with psc/pwm modifications */
+	if (value > 1 && value < 32767)
+		data->pwm[1] = 127;
+	else
+		data->pwm[1] = 0;
+
+	schedule_work(&data->work);
+
+	return 0;
+}
+
+static void pca9532_input_work(struct work_struct *work)
+{
+	struct pca9532_data *data =
+		container_of(work, struct pca9532_data, work);
+	u8 maxleds = data->chip_info->num_leds;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(data->client, PCA9532_REG_PWM(maxleds, 1),
+		data->pwm[1]);
+	mutex_unlock(&data->update_lock);
+}
+
+static void pca9532_led_work(struct work_struct *work)
+{
+	struct pca9532_led *led;
+	led = container_of(work, struct pca9532_led, work);
+	if (led->state == PCA9532_PWM0)
+		pca9532_setpwm(led->client, 0);
+	pca9532_setled(led);
+}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
+{
+	struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+	struct pca9532_led *led = &data->leds[offset];
+
+	if (led->type == PCA9532_TYPE_GPIO)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+	struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+	struct pca9532_led *led = &data->leds[offset];
+
+	if (val)
+		led->state = PCA9532_ON;
+	else
+		led->state = PCA9532_OFF;
+
+	pca9532_setled(led);
+}
+
+static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+	struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+	unsigned char reg;
+
+	reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
+
+	return !!(reg & (1 << (offset % 8)));
+}
+
+static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	/* To use as input ensure pin is not driven */
+	pca9532_gpio_set_value(gc, offset, 0);
+
+	return 0;
+}
+
+static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
+{
+	pca9532_gpio_set_value(gc, offset, val);
+
+	return 0;
+}
+#endif /* CONFIG_LEDS_PCA9532_GPIO */
+
+static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+{
+	int i = n_devs;
+
+	if (!data)
+		return -EINVAL;
+
+	while (--i >= 0) {
+		switch (data->leds[i].type) {
+		case PCA9532_TYPE_NONE:
+		case PCA9532_TYPE_GPIO:
+			break;
+		case PCA9532_TYPE_LED:
+			led_classdev_unregister(&data->leds[i].ldev);
+			cancel_work_sync(&data->leds[i].work);
+			break;
+		case PCA9532_TYPE_N2100_BEEP:
+			if (data->idev != NULL) {
+				input_unregister_device(data->idev);
+				cancel_work_sync(&data->work);
+				data->idev = NULL;
+			}
+			break;
+		}
+	}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	if (data->gpio.dev) {
+		int err = gpiochip_remove(&data->gpio);
+		if (err) {
+			dev_err(&data->client->dev, "%s failed, %d\n",
+						"gpiochip_remove()", err);
+			return err;
+		}
+	}
+#endif
+
+	return 0;
+}
+
+static int pca9532_configure(struct i2c_client *client,
+	struct pca9532_data *data, struct pca9532_platform_data *pdata)
+{
+	int i, err = 0;
+	int gpios = 0;
+	u8 maxleds = data->chip_info->num_leds;
+
+	for (i = 0; i < 2; i++)	{
+		data->pwm[i] = pdata->pwm[i];
+		data->psc[i] = pdata->psc[i];
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PWM(maxleds, i),
+			data->pwm[i]);
+		i2c_smbus_write_byte_data(client, PCA9532_REG_PSC(maxleds, i),
+			data->psc[i]);
+	}
+
+	for (i = 0; i < data->chip_info->num_leds; i++) {
+		struct pca9532_led *led = &data->leds[i];
+		struct pca9532_led *pled = &pdata->leds[i];
+		led->client = client;
+		led->id = i;
+		led->type = pled->type;
+		switch (led->type) {
+		case PCA9532_TYPE_NONE:
+			break;
+		case PCA9532_TYPE_GPIO:
+			gpios++;
+			break;
+		case PCA9532_TYPE_LED:
+			led->state = pled->state;
+			led->name = pled->name;
+			led->ldev.name = led->name;
+			led->ldev.brightness = LED_OFF;
+			led->ldev.brightness_set = pca9532_set_brightness;
+			led->ldev.blink_set = pca9532_set_blink;
+			INIT_WORK(&led->work, pca9532_led_work);
+			err = led_classdev_register(&client->dev, &led->ldev);
+			if (err < 0) {
+				dev_err(&client->dev,
+					"couldn't register LED %s\n",
+					led->name);
+				goto exit;
+			}
+			pca9532_setled(led);
+			break;
+		case PCA9532_TYPE_N2100_BEEP:
+			BUG_ON(data->idev);
+			led->state = PCA9532_PWM1;
+			pca9532_setled(led);
+			data->idev = input_allocate_device();
+			if (data->idev == NULL) {
+				err = -ENOMEM;
+				goto exit;
+			}
+			data->idev->name = pled->name;
+			data->idev->phys = "i2c/pca9532";
+			data->idev->id.bustype = BUS_HOST;
+			data->idev->id.vendor = 0x001f;
+			data->idev->id.product = 0x0001;
+			data->idev->id.version = 0x0100;
+			data->idev->evbit[0] = BIT_MASK(EV_SND);
+			data->idev->sndbit[0] = BIT_MASK(SND_BELL) |
+						BIT_MASK(SND_TONE);
+			data->idev->event = pca9532_event;
+			input_set_drvdata(data->idev, data);
+			INIT_WORK(&data->work, pca9532_input_work);
+			err = input_register_device(data->idev);
+			if (err) {
+				input_free_device(data->idev);
+				cancel_work_sync(&data->work);
+				data->idev = NULL;
+				goto exit;
+			}
+			break;
+		}
+	}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+	if (gpios) {
+		data->gpio.label = "gpio-pca9532";
+		data->gpio.direction_input = pca9532_gpio_direction_input;
+		data->gpio.direction_output = pca9532_gpio_direction_output;
+		data->gpio.set = pca9532_gpio_set_value;
+		data->gpio.get = pca9532_gpio_get_value;
+		data->gpio.request = pca9532_gpio_request_pin;
+		data->gpio.can_sleep = 1;
+		data->gpio.base = pdata->gpio_base;
+		data->gpio.ngpio = data->chip_info->num_leds;
+		data->gpio.dev = &client->dev;
+		data->gpio.owner = THIS_MODULE;
+
+		err = gpiochip_add(&data->gpio);
+		if (err) {
+			/* Use data->gpio.dev as a flag for freeing gpiochip */
+			data->gpio.dev = NULL;
+			dev_warn(&client->dev, "could not add gpiochip\n");
+		} else {
+			dev_info(&client->dev, "gpios %i...%i\n",
+				data->gpio.base, data->gpio.base +
+				data->gpio.ngpio - 1);
+		}
+	}
+#endif
+
+	return 0;
+
+exit:
+	pca9532_destroy_devices(data, i);
+	return err;
+}
+
+static int pca9532_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	struct pca9532_platform_data *pca9532_pdata = client->dev.platform_data;
+	int err;
+
+	if (!pca9532_pdata)
+		return -EIO;
+
+	if (!i2c_check_functionality(client->adapter,
+		I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->chip_info = &pca9532_chip_info_tbl[id->driver_data];
+
+	dev_info(&client->dev, "setting platform data\n");
+	i2c_set_clientdata(client, data);
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	err = pca9532_configure(client, data, pca9532_pdata);
+	if (err)
+		kfree(data);
+
+	return err;
+}
+
+static int pca9532_remove(struct i2c_client *client)
+{
+	struct pca9532_data *data = i2c_get_clientdata(client);
+	int err;
+
+	err = pca9532_destroy_devices(data, data->chip_info->num_leds);
+	if (err)
+		return err;
+
+	kfree(data);
+	return 0;
+}
+
+module_i2c_driver(pca9532_driver);
+
+MODULE_AUTHOR("Riku Voipio");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCA 9532 LED dimmer");