Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 83 insertions, 0 deletions

diff --git a/drivers/input/sensor/mxc622x_gsensor/mxc622x.h b/drivers/input/sensor/mxc622x_gsensor/mxc622x.h
new file mode 100755
index 00000000..2b83bb7b
--- /dev/null
+++ b/drivers/input/sensor/mxc622x_gsensor/mxc622x.h
@@ -0,0 +1,83 @@
+
+/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
+*
+* File Name          : mxc622x.h
+* Authors            : MH - C&I BU - Application Team
+*
+********************************************************************************
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES
+* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
+* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*
+* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
+*
+*******************************************************************************/
+
+
+#ifndef	__MXC622X_H__
+#define	__MXC622X_H__
+
+#include	<linux/ioctl.h>	/* For IOCTL macros */
+#include	<linux/input.h>
+
+#ifndef DEBUG
+#define DEBUG
+#endif
+
+#define GSENSOR_I2C_NAME	"mxc622x"
+#define GSENSOR_I2C_ADDR	0x15
+
+#define	MXC622X_ACC_IOCTL_BASE 77
+/** The following define the IOCTL command values via the ioctl macros */
+#define	MXC622X_ACC_IOCTL_SET_DELAY		_IOW(MXC622X_ACC_IOCTL_BASE, 0, int)
+#define	MXC622X_ACC_IOCTL_GET_DELAY		_IOR(MXC622X_ACC_IOCTL_BASE, 1, int)
+#define	MXC622X_ACC_IOCTL_SET_ENABLE		_IOW(MXC622X_ACC_IOCTL_BASE, 2, int)
+#define	MXC622X_ACC_IOCTL_GET_ENABLE		_IOR(MXC622X_ACC_IOCTL_BASE, 3, int)
+#define	MXC622X_ACC_IOCTL_GET_COOR_XYZ       _IOW(MXC622X_ACC_IOCTL_BASE, 22, int)
+#define	MXC622X_ACC_IOCTL_GET_CHIP_ID        _IOR(MXC622X_ACC_IOCTL_BASE, 255, char[32])
+
+/************************************************/
+/* 	Accelerometer defines section	 	*/
+/************************************************/
+#define MXC622X_ACC_DEV_NAME		"mxc622x"
+#define MXC622X_ACC_INPUT_NAME		"accelerometer" 
+#define MXC622X_ACC_I2C_ADDR     	0x15
+#define MXC622X_ACC_I2C_NAME     	MXC622X_ACC_DEV_NAME
+
+/* MXC622X register address */
+#define MXC622X_REG_CTRL		0x04
+#define MXC622X_REG_DATA		0x00
+
+/* MXC622X control bit */
+#define MXC622X_CTRL_PWRON		0x00	/* power on */
+#define MXC622X_CTRL_PWRDN		0x80	/* power donw */
+
+//#if defined(CONFIG_MACH_SP6810A)
+//#define I2C_BUS_NUM_STATIC_ALLOC
+#define I2C_STATIC_BUS_NUM        ( 0)	// Need to be modified according to actual setting
+//#endif
+
+struct mxc622x_acc_platform_data {
+	int poll_interval;
+	int min_interval;
+
+	int (*init)(void);
+	void (*exit)(void);
+	int (*power_on)(void);
+	int (*power_off)(void);
+
+};
+
+#endif	/* __MXC622X_H__ */
+
+
+