Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

150 files changed, 17419 insertions, 0 deletions

diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
new file mode 100644
index 00000000..eeb8054c
--- /dev/null
+++ b/arch/unicore32/Kconfig
@@ -0,0 +1,269 @@
+config UNICORE32
+	def_bool y
+	select HAVE_MEMBLOCK
+	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_DMA_ATTRS
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_LZMA
+	select GENERIC_FIND_FIRST_BIT
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select ARCH_WANT_FRAME_POINTERS
+	select GENERIC_IOMAP
+	help
+	  UniCore-32 is 32-bit Instruction Set Architecture,
+	  including a series of low-power-consumption RISC chip
+	  designs licensed by PKUnity Ltd.
+	  Please see web page at <http://www.pkunity.com/>.
+
+config HAVE_PWM
+	bool
+
+config GENERIC_GPIO
+	def_bool y
+
+config GENERIC_CLOCKEVENTS
+	bool
+
+config GENERIC_CSUM
+	def_bool y
+
+config NO_IOPORT
+	bool
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config ARCH_HAS_ILOG2_U32
+	bool
+
+config ARCH_HAS_ILOG2_U64
+	bool
+
+config ARCH_HAS_CPUFREQ
+	bool
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+
+config NEED_DMA_MAP_STATE
+       def_bool y
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "System Type"
+
+config MMU
+	def_bool y
+
+config ARCH_FPGA
+	bool
+
+config ARCH_PUV3
+	def_bool y
+	select CPU_UCV2
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
+
+# CONFIGs for ARCH_PUV3
+
+if ARCH_PUV3
+
+choice
+	prompt "Board Selection"
+	default PUV3_DB0913
+
+config PUV3_FPGA_DLX200
+	select ARCH_FPGA
+	bool "FPGA board"
+
+config PUV3_DB0913
+	bool "DEBUG board (0913)"
+
+config PUV3_NB0916
+	bool "NetBook board (0916)"
+	select HAVE_PWM
+
+config PUV3_SMW0919
+	bool "Security Mini-Workstation board (0919)"
+
+endchoice
+
+config PUV3_PM
+	def_bool y if !ARCH_FPGA
+
+endif
+
+source "arch/unicore32/mm/Kconfig"
+
+comment "Floating poing support"
+
+config UNICORE_FPU_F64
+	def_bool y if !ARCH_FPGA
+
+endmenu
+
+menu "Bus support"
+
+config PCI
+	bool "PCI Support"
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+endmenu
+
+menu "Kernel Features"
+
+source "kernel/time/Kconfig"
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.hz"
+
+source "mm/Kconfig"
+
+config LEDS
+	def_bool y
+	depends on GENERIC_GPIO
+
+config ALIGNMENT_TRAP
+	def_bool y
+	help
+	  Unicore processors can not fetch/store information which is not
+	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
+	  address divisible by 4. On 32-bit Unicore processors, these non-aligned
+	  fetch/store instructions will be emulated in software if you say
+	  here, which has a severe performance impact. This is necessary for
+	  correct operation of some network protocols. With an IP-only
+	  configuration it is safe to say N, otherwise say Y.
+
+endmenu
+
+menu "Boot options"
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	depends on CMDLINE != ""
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+	  If unsure, say N.
+
+endmenu
+
+menu "Userspace binary formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+if ARCH_HAS_CPUFREQ
+source "drivers/cpufreq/Kconfig"
+endif
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y if !ARCH_FPGA
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool y if !ARCH_FPGA
+
+endmenu
+
+source "net/Kconfig"
+
+if ARCH_PUV3
+
+config PUV3_GPIO
+	bool
+	depends on !ARCH_FPGA
+	select GENERIC_GPIO
+	select GPIO_SYSFS if EXPERIMENTAL
+	default y
+
+config PUV3_PWM
+	tristate
+	default BACKLIGHT_PWM
+	help
+	  Enable support for NB0916 PWM controllers
+
+if PUV3_NB0916
+
+menu "PKUnity NetBook-0916 Features"
+
+config I2C_BATTERY_BQ27200
+	tristate "I2C Battery BQ27200 Support"
+	select I2C_PUV3
+	select POWER_SUPPLY
+	select BATTERY_BQ27x00
+
+config I2C_EEPROM_AT24
+	tristate "I2C EEPROMs AT24 support"
+	select I2C_PUV3
+	select MISC_DEVICES
+	select EEPROM_AT24
+
+config LCD_BACKLIGHT
+	tristate "LCD Backlight support"
+	select BACKLIGHT_LCD_SUPPORT
+	select BACKLIGHT_PWM
+
+endmenu
+
+endif
+
+endif
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/unicore32/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
new file mode 100644
index 00000000..1a362623
--- /dev/null
+++ b/arch/unicore32/Kconfig.debug
@@ -0,0 +1,47 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config STRICT_DEVMEM
+	bool "Filter access to /dev/mem"
+	depends on MMU
+	---help---
+	  If this option is disabled, you allow userspace (root) access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to memory mapped peripherals.
+
+          If in doubt, say Y.
+
+config EARLY_PRINTK
+	def_bool DEBUG_OCD
+	help
+	  Write kernel log output directly into the ocd or to a serial port.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd or the X server. You should normally N here,
+	  unless you want to debug such a crash.
+
+# These options are only for real kernel hackers who want to get their hands dirty.
+config DEBUG_LL
+	bool "Kernel low-level debugging functions"
+	depends on DEBUG_KERNEL
+	help
+	  Say Y here to include definitions of printascii, printch, printhex
+	  in the kernel.  This is helpful if you are debugging code that
+	  executes before the console is initialized.
+
+config DEBUG_OCD
+	bool "Kernel low-level debugging via On-Chip-Debugger"
+	depends on DEBUG_LL
+	default y
+	help
+	  Say Y here if you want the debug print routines to direct their
+	  output to the UniCore On-Chip-Debugger channel using CP #1.
+
+endmenu
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
new file mode 100644
index 00000000..6af4bc41
--- /dev/null
+++ b/arch/unicore32/Makefile
@@ -0,0 +1,61 @@
+#
+# arch/unicore32/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2002~2010 by Guan Xue-tao
+#
+ifneq ($(SUBARCH),$(ARCH))
+	ifeq ($(CROSS_COMPILE),)
+		CROSS_COMPILE := $(call cc-cross-prefix, unicore32-linux-)
+	endif
+endif
+
+LDFLAGS_vmlinux		:= -p --no-undefined -X
+
+OBJCOPYFLAGS		:= -O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+# Never generate .eh_frame
+KBUILD_CFLAGS		+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
+# Never use hard float in kernel
+KBUILD_CFLAGS		+= -msoft-float
+
+ifeq ($(CONFIG_FRAME_POINTER),y)
+KBUILD_CFLAGS		+= -mno-sched-prolog
+endif
+
+CHECKFLAGS		+= -D__unicore32__
+
+head-y			:= arch/unicore32/kernel/head.o
+head-y			+= arch/unicore32/kernel/init_task.o
+
+core-y			+= arch/unicore32/kernel/
+core-y			+= arch/unicore32/mm/
+
+libs-y			+= arch/unicore32/lib/
+
+boot			:= arch/unicore32/boot
+
+# Default defconfig and target when executing plain make
+KBUILD_DEFCONFIG	:= $(ARCH)_defconfig
+KBUILD_IMAGE		:= zImage
+
+all:	$(KBUILD_IMAGE)
+
+zImage Image uImage: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+  echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+  echo  '  uImage        - U-Boot wrapped zImage'
+endef
diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile
new file mode 100644
index 00000000..ec7fb70b
--- /dev/null
+++ b/arch/unicore32/boot/Makefile
@@ -0,0 +1,39 @@
+#
+# arch/unicore32/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2001~2010 GUAN Xue-tao
+#
+
+targets := Image zImage uImage
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+UIMAGE_ARCH = unicore
+UIMAGE_LOADADDR = 0x0
+
+$(obj)/uImage: $(obj)/zImage FORCE
+	$(call if_changed,uimage)
+	@echo '  Image $@ is ready'
+
+PHONY += initrd FORCE
+initrd:
+	@test "$(INITRD)" != "" || \
+	(echo You must specify INITRD; exit -1)
+
+subdir- := compressed
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
new file mode 100644
index 00000000..950a9afa
--- /dev/null
+++ b/arch/unicore32/boot/compressed/Makefile
@@ -0,0 +1,68 @@
+#
+# linux/arch/unicore32/boot/compressed/Makefile
+#
+# create a compressed vmlinuz image from the original vmlinux
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2001~2010 GUAN Xue-tao
+#
+
+ccflags-y	:= -fpic -fno-builtin
+asflags-y	:= -Wa,-march=all
+
+OBJS		:= misc.o
+
+# font.c and font.o
+CFLAGS_font.o	:= -Dstatic=
+$(obj)/font.c: $(srctree)/drivers/video/console/font_8x8.c
+	$(call cmd,shipped)
+
+# piggy.S and piggy.o
+suffix_$(CONFIG_KERNEL_GZIP)	:= gzip
+suffix_$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix_$(CONFIG_KERNEL_LZO)	:= lzo
+suffix_$(CONFIG_KERNEL_LZMA)	:= lzma
+
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+	$(call if_changed,$(suffix_y))
+
+SEDFLAGS_piggy	= s/DECOMP_SUFFIX/$(suffix_y)/
+$(obj)/piggy.S: $(obj)/piggy.S.in
+	@sed "$(SEDFLAGS_piggy)" < $< > $@
+
+$(obj)/piggy.o:  $(obj)/piggy.$(suffix_y) $(obj)/piggy.S FORCE
+
+targets		:= vmlinux vmlinux.lds font.o font.c head.o misc.o \
+			piggy.$(suffix_y) piggy.o piggy.S \
+
+# Make sure files are removed during clean
+extra-y		+= piggy.gzip piggy.bz2 piggy.lzo piggy.lzma
+
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For uidivmod
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head.o $(obj)/piggy.o \
+		$(obj)/misc.o FORCE
+	$(call if_changed,ld)
+	@:
+
+# We now have a PIC decompressor implementation.  Decompressors running
+# from RAM should not define ZTEXTADDR.  Decompressors running directly
+# from ROM or Flash must define ZTEXTADDR (preferably via the config)
+ZTEXTADDR	:= 0x03000000
+ZBSSADDR	:= ALIGN(4)
+
+SEDFLAGS_lds	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/unicore32/boot/Makefile $(KCONFIG_CONFIG)
+	@sed "$(SEDFLAGS_lds)" < $< > $@
+
diff --git a/arch/unicore32/boot/compressed/head.S b/arch/unicore32/boot/compressed/head.S
new file mode 100644
index 00000000..fbd1e374
--- /dev/null
+++ b/arch/unicore32/boot/compressed/head.S
@@ -0,0 +1,204 @@
+/*
+ * linux/arch/unicore32/boot/compressed/head.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <mach/memory.h>
+
+#define csub	cmpsub
+#define cand	cmpand
+#define nop8	nop; nop; nop; nop; nop; nop; nop; nop
+
+		.section ".start", #alloc, #execinstr
+		.text
+start:
+		.type	start,#function
+
+		/* Initialize ASR, PRIV mode and INTR off */
+		mov	r0, #0xD3
+		mov.a	asr, r0
+
+		adr	r0, LC0
+		ldm	(r1, r2, r3, r5, r6, r7, r8), [r0]+
+		ldw	sp, [r0+], #28
+		sub.a	r0, r0, r1		@ calculate the delta offset
+
+		/*
+		 * if delta is zero, we are running at the address
+		 * we were linked at.
+		 */
+		beq	not_relocated
+
+		/*
+		 * We're running at a different address.  We need to fix
+		 * up various pointers:
+		 *   r5 - zImage base address (_start)
+		 *   r7 - GOT start
+		 *   r8 - GOT end
+		 */
+		add	r5, r5, r0
+		add	r7, r7, r0
+		add	r8, r8, r0
+
+		/*
+		 * we need to fix up pointers into the BSS region.
+		 *   r2 - BSS start
+		 *   r3 - BSS end
+		 *   sp - stack pointer
+		 */
+		add	r2, r2, r0
+		add	r3, r3, r0
+		add	sp, sp, r0
+
+		/*
+		 * Relocate all entries in the GOT table.
+		 * This fixes up the C references.
+		 *   r7 - GOT start
+		 *   r8 - GOT end
+		 */
+1001:		ldw	r1, [r7+], #0
+		add	r1, r1, r0
+		stw.w	r1, [r7]+, #4
+		csub.a	r7, r8
+		bub	1001b
+
+not_relocated:
+		/*
+		 * Clear BSS region.
+		 *   r2 - BSS start
+		 *   r3 - BSS end
+		 */
+		mov	r0, #0
+1002:		stw.w	r0, [r2]+, #4
+		csub.a	r2, r3
+		bub	1002b
+
+		/*
+		 * Turn on the cache.
+		 */
+                mov     r0, #0
+                movc    p0.c5, r0, #28		@ cache invalidate all
+                nop8
+                movc    p0.c6, r0, #6		@ tlb invalidate all
+                nop8
+
+                mov     r0, #0x1c		@ en icache and wb dcache
+                movc    p0.c1, r0, #0
+                nop8
+
+		/*
+		 * Set up some pointers, for starting decompressing.
+		 */
+
+		mov	r1, sp			@ malloc space above stack
+		add	r2, sp, #0x10000	@ 64k max
+
+		/*
+		 * Check to see if we will overwrite ourselves.
+		 *   r4 = final kernel address
+		 *   r5 = start of this image
+		 *   r6 = size of decompressed image
+		 *   r2 = end of malloc space (and therefore this image)
+		 * We basically want:
+		 *   r4 >= r2 -> OK
+		 *   r4 + image length <= r5 -> OK
+		 */
+		ldw	r4, =KERNEL_IMAGE_START
+		csub.a	r4, r2
+		bea	wont_overwrite
+		add	r0, r4, r6
+		csub.a	r0, r5
+		beb	wont_overwrite
+
+		/*
+		 * If overwrite, just print error message
+		 */
+		b	__error_overwrite
+
+		/*
+		 * We're not in danger of overwriting ourselves.
+		 * Do this the simple way.
+		 */
+wont_overwrite:
+		/*
+		 * decompress_kernel:
+		 *   r0: output_start
+		 *   r1: free_mem_ptr_p
+		 *   r2: free_mem_ptr_end_p
+		 */
+		mov	r0, r4
+		b.l	decompress_kernel	@ C functions
+
+		/*
+		 * Clean and flush the cache to maintain consistency.
+		 */
+		mov	r0, #0
+                movc    p0.c5, r0, #14		@ flush dcache
+		nop8
+                movc    p0.c5, r0, #20		@ icache invalidate all
+                nop8
+
+		/*
+		 * Turn off the Cache and MMU.
+		 */
+		mov	r0, #0			@ disable i/d cache and MMU
+		movc	p0.c1, r0, #0
+                nop8
+
+		mov	r0, #0			@ must be zero
+		ldw	r4, =KERNEL_IMAGE_START
+		mov	pc, r4			@ call kernel
+
+
+		.align	2
+		.type	LC0, #object
+LC0:		.word	LC0			@ r1
+		.word	__bss_start		@ r2
+		.word	_end			@ r3
+		.word	_start			@ r5
+		.word	_image_size		@ r6
+		.word	_got_start		@ r7
+		.word	_got_end		@ r8
+		.word	decompress_stack_end	@ sp
+		.size	LC0, . - LC0
+
+print_string:
+#ifdef CONFIG_DEBUG_OCD
+2001:		ldb.w	r1, [r0]+, #1
+		csub.a	r1, #0
+		bne	2002f
+		mov	pc, lr
+2002:
+		movc	r2, p1.c0, #0
+		cand.a	r2, #2
+		bne	2002b
+		movc	p1.c1, r1, #1
+		csub.a	r1, #'\n'
+		cmoveq	r1, #'\r'
+		beq	2002b
+		b	2001b
+#else
+		mov	pc, lr
+#endif
+
+__error_overwrite:
+		adr	r0, str_error
+		b.l	print_string
+2001:		nop8
+		b	2001b
+str_error:	.asciz	"\nError: Kernel address OVERWRITE\n"
+		.align
+
+		.ltorg
+
+		.align	4
+		.section ".stack", "aw", %nobits
+decompress_stack:	.space	4096
+decompress_stack_end:
diff --git a/arch/unicore32/boot/compressed/misc.c b/arch/unicore32/boot/compressed/misc.c
new file mode 100644
index 00000000..176d5bda
--- /dev/null
+++ b/arch/unicore32/boot/compressed/misc.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/unicore32/boot/compressed/misc.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/unaligned.h>
+#include <mach/uncompress.h>
+
+/*
+ * gzip delarations
+ */
+unsigned char *output_data;
+unsigned long output_ptr;
+
+unsigned int free_mem_ptr;
+unsigned int free_mem_end_ptr;
+
+#define STATIC static
+#define STATIC_RW_DATA	/* non-static please */
+
+/*
+ * arch-dependent implementations
+ */
+#ifndef ARCH_HAVE_DECOMP_ERROR
+#define arch_decomp_error(x)
+#endif
+
+#ifndef ARCH_HAVE_DECOMP_SETUP
+#define arch_decomp_setup()
+#endif
+
+#ifndef ARCH_HAVE_DECOMP_PUTS
+#define arch_decomp_puts(p)
+#endif
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	int i = 0;
+	unsigned char *d = (unsigned char *)dest, *s = (unsigned char *)src;
+
+	for (i = n >> 3; i > 0; i--) {
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (n & 1 << 2) {
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (n & 1 << 1) {
+		*d++ = *s++;
+		*d++ = *s++;
+	}
+
+	if (n & 1)
+		*d++ = *s++;
+
+	return dest;
+}
+
+void error(char *x)
+{
+	arch_decomp_puts("\n\n");
+	arch_decomp_puts(x);
+	arch_decomp_puts("\n\n -- System halted");
+
+	arch_decomp_error(x);
+
+	for (;;)
+		; /* Halt */
+}
+
+/* Heap size should be adjusted for different decompress method */
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+unsigned long decompress_kernel(unsigned long output_start,
+		unsigned long free_mem_ptr_p,
+		unsigned long free_mem_ptr_end_p)
+{
+	unsigned char *tmp;
+
+	output_data		= (unsigned char *)output_start;
+	free_mem_ptr		= free_mem_ptr_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
+
+	arch_decomp_setup();
+
+	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+	output_ptr = get_unaligned_le32(tmp);
+
+	arch_decomp_puts("Uncompressing Linux...");
+	decompress(input_data, input_data_end - input_data, NULL, NULL,
+			output_data, NULL, error);
+	arch_decomp_puts(" done, booting the kernel.\n");
+	return output_ptr;
+}
diff --git a/arch/unicore32/boot/compressed/piggy.S.in b/arch/unicore32/boot/compressed/piggy.S.in
new file mode 100644
index 00000000..b79704d5
--- /dev/null
+++ b/arch/unicore32/boot/compressed/piggy.S.in
@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/unicore32/boot/compressed/piggy.DECOMP_SUFFIX"
+	.globl	input_data_end
+input_data_end:
diff --git a/arch/unicore32/boot/compressed/vmlinux.lds.in b/arch/unicore32/boot/compressed/vmlinux.lds.in
new file mode 100644
index 00000000..d5a3ce29
--- /dev/null
+++ b/arch/unicore32/boot/compressed/vmlinux.lds.in
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/unicore/boot/compressed/vmlinux.lds.in
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+OUTPUT_ARCH(unicore32)
+ENTRY(_start)
+SECTIONS
+{
+  /DISCARD/ : {
+    /*
+     * Discard any r/w data - this produces a link error if we have any,
+     * which is required for PIC decompression.  Local data generates
+     * GOTOFF relocations, which prevents it being relocated independently
+     * of the text/got segments.
+     */
+    *(.data)
+  }
+
+  . = TEXT_START;
+  _text = .;
+
+  .text : {
+    _start = .;
+    *(.start)
+    *(.text)
+    *(.text.*)
+    *(.fixup)
+    *(.gnu.warning)
+    *(.rodata)
+    *(.rodata.*)
+    *(.piggydata)
+    . = ALIGN(4);
+  }
+
+  _etext = .;
+
+  /* Assume size of decompressed image is 4x the compressed image */
+  _image_size = (_etext - _text) * 4;
+
+  _got_start = .;
+  .got			: { *(.got) }
+  _got_end = .;
+  .got.plt		: { *(.got.plt) }
+  _edata = .;
+
+  . = BSS_START;
+  __bss_start = .;
+  .bss			: { *(.bss) }
+  _end = .;
+
+  .stack		: { *(.stack) }
+  .comment 0		: { *(.comment) }
+}
+
diff --git a/arch/unicore32/configs/unicore32_defconfig b/arch/unicore32/configs/unicore32_defconfig
new file mode 100644
index 00000000..c9dd3198
--- /dev/null
+++ b/arch/unicore32/configs/unicore32_defconfig
@@ -0,0 +1,215 @@
+### General setup
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="-unicore32"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_HOTPLUG=y
+#	Initial RAM filesystem and RAM disk (initramfs/initrd) support
+#CONFIG_BLK_DEV_INITRD=y
+#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
+
+### Enable loadable module support
+CONFIG_MODULES=n
+CONFIG_MODULE_UNLOAD=y
+
+### System Type
+CONFIG_ARCH_PUV3=y
+#	Board Selection
+CONFIG_PUV3_NB0916=y
+#	Processor Features
+CONFIG_CPU_DCACHE_LINE_DISABLE=y
+CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
+
+### Bus support
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY=n
+
+### Boot options
+#	for debug, adding: earlyprintk=ocd,keep initcall_debug
+#	others support: test_suspend=mem root=/dev/sda
+#	hibernate support: resume=/dev/sda3
+CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel"
+# TODO: mem=512M video=unifb:1024x600-16@75
+# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024
+#	ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off
+CONFIG_CMDLINE_FORCE=y
+
+### Power management options
+CONFIG_PM=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/sda3"
+CONFIG_CPU_FREQ=n
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+
+### Networking support
+CONFIG_NET=y
+#	Networking options
+CONFIG_PACKET=m
+CONFIG_UNIX=m
+#	TCP/IP networking
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IPV6=n
+#	Wireless
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+### PKUnity SoC Features
+CONFIG_USB_WLAN_HED_AQ3=n
+CONFIG_USB_CMMB_INNOFIDEI=n
+CONFIG_I2C_BATTERY_BQ27200=n
+CONFIG_I2C_EEPROM_AT24=n
+CONFIG_LCD_BACKLIGHT=n
+
+CONFIG_PUV3_UMAL=y
+CONFIG_PUV3_MUSB=n
+CONFIG_PUV3_AC97=n
+CONFIG_PUV3_NAND=n
+CONFIG_PUV3_MMC=n
+CONFIG_PUV3_UART=n
+
+### Device Drivers
+#	Memory Technology Device (MTD) support
+CONFIG_MTD=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+#	RAM/ROM/Flash chip drivers
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_AMDSTD=m
+#	Mapping drivers for chip access
+CONFIG_MTD_PHYSMAP=m
+
+#	Block devices
+CONFIG_BLK_DEV_LOOP=m
+
+#	SCSI device support
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+
+#	Serial ATA (prod) and Parallel ATA (experimental) drivers
+CONFIG_ATA=y
+CONFIG_SATA_VIA=y
+
+#	Network device support
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NETDEV_1000=y
+#	Wireless LAN
+CONFIG_WLAN_80211=n
+CONFIG_RT2X00=n
+CONFIG_RT73USB=n
+
+#	Input device support
+CONFIG_INPUT_EVDEV=m
+#	Keyboards
+CONFIG_KEYBOARD_GPIO=m
+
+#	I2C support
+CONFIG_I2C=y
+CONFIG_I2C_PUV3=y
+
+#	Hardware Monitoring support
+#CONFIG_SENSORS_LM75=m
+#	Generic Thermal sysfs driver
+#CONFIG_THERMAL=m
+#CONFIG_THERMAL_HWMON=y
+
+#	Multimedia support
+CONFIG_MEDIA_SUPPORT=n
+CONFIG_VIDEO_DEV=n
+CONFIG_USB_VIDEO_CLASS=n
+
+#	Graphics support
+CONFIG_FB=y
+CONFIG_FB_PUV3_UNIGFX=y
+#	Console display driver support
+CONFIG_VGA_CONSOLE=n
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+#	Bootup logo
+CONFIG_LOGO=n
+
+#	Sound card support
+CONFIG_SOUND=m
+#	Advanced Linux Sound Architecture
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+
+#	USB support
+CONFIG_USB_ARCH_HAS_HCD=n
+CONFIG_USB=n
+CONFIG_USB_DEVICEFS=n
+CONFIG_USB_PRINTER=n
+CONFIG_USB_STORAGE=n
+#	Inventra Highspeed Dual Role Controller
+CONFIG_USB_MUSB_HDRC=n
+
+#	LED Support
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+#	LED Triggers
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#	Real Time Clock
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PUV3=y
+
+### File systems
+CONFIG_EXT2_FS=m
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FUSE_FS=m
+#	CD-ROM/DVD Filesystems
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+#	DOS/FAT/NT Filesystems
+CONFIG_VFAT_FS=m
+#	Pseudo filesystems
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+#	Miscellaneous filesystems
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=m
+CONFIG_UBIFS_FS=m
+#	Network File Systems
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+#	Partition Types
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MSDOS_PARTITION=y
+#	Native language support
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+
+### Kernel hacking
+CONFIG_FRAME_WARN=8096
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_PROVE_LOCKING=n
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_LL=y
+
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
new file mode 100644
index 00000000..34b789b7
--- /dev/null
+++ b/arch/unicore32/include/asm/Kbuild
@@ -0,0 +1,60 @@
+include include/asm-generic/Kbuild.asm
+
+generic-y += atomic.h
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += bugs.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += syscalls.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += types.h
+generic-y += ucontext.h
+generic-y += unaligned.h
+generic-y += user.h
+generic-y += vga.h
+generic-y += xor.h
diff --git a/arch/unicore32/include/asm/assembler.h b/arch/unicore32/include/asm/assembler.h
new file mode 100644
index 00000000..8e87ed7f
--- /dev/null
+++ b/arch/unicore32/include/asm/assembler.h
@@ -0,0 +1,131 @@
+/*
+ * linux/arch/unicore32/include/asm/assembler.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Little Endian independent macros for shifting bytes within registers.
+ */
+#define pull            >>
+#define push            <<
+#define get_byte_0      << #0
+#define get_byte_1	>> #8
+#define get_byte_2	>> #16
+#define get_byte_3	>> #24
+#define put_byte_0      << #0
+#define put_byte_1	<< #8
+#define put_byte_2	<< #16
+#define put_byte_3	<< #24
+
+#define cadd		cmpadd
+#define cand		cmpand
+#define csub		cmpsub
+#define cxor		cmpxor
+
+/*
+ * Enable and disable interrupts
+ */
+	.macro disable_irq, temp
+	mov	\temp, asr
+	andn     \temp, \temp, #0xFF
+	or	\temp, \temp, #PSR_I_BIT | PRIV_MODE
+	mov.a	asr, \temp
+	.endm
+
+	.macro enable_irq, temp
+	mov	\temp, asr
+	andn     \temp, \temp, #0xFF
+	or	\temp, \temp, #PRIV_MODE
+	mov.a	asr, \temp
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.pushsection __ex_table, "a";		\
+	.align	3;				\
+	.long	9999b, 9001f;			\
+	.popsection
+
+	.macro	notcond, cond, nexti = .+8
+	.ifc	\cond, eq
+		bne	\nexti
+	.else;	.ifc	\cond, ne
+		beq	\nexti
+	.else;	.ifc	\cond, ea
+		bub	\nexti
+	.else;	.ifc	\cond, ub
+		bea	\nexti
+	.else;	.ifc	\cond, fs
+		bns	\nexti
+	.else;	.ifc	\cond, ns
+		bfs	\nexti
+	.else;	.ifc	\cond, fv
+		bnv	\nexti
+	.else;	.ifc	\cond, nv
+		bfv	\nexti
+	.else;	.ifc	\cond, ua
+		beb	\nexti
+	.else;	.ifc	\cond, eb
+		bua	\nexti
+	.else;	.ifc	\cond, eg
+		bsl	\nexti
+	.else;	.ifc	\cond, sl
+		beg	\nexti
+	.else;	.ifc	\cond, sg
+		bel	\nexti
+	.else;	.ifc	\cond, el
+		bsg	\nexti
+	.else;	.ifnc	\cond, al
+		.error  "Unknown cond in notcond macro argument"
+	.endif;	.endif;	.endif;	.endif;	.endif;	.endif;	.endif
+	.endif;	.endif;	.endif;	.endif;	.endif;	.endif;	.endif
+	.endif
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.rept	\rept
+	notcond	\cond, .+8
+9999 :
+	.if	\inc == 1
+	\instr\()b.u \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\()w.u \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.pushsection __ex_table, "a"
+	.align	3
+	.long	9999b, \abort
+	.popsection
+	.endr
+	.endm
+
+	.macro	strusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
+	usracc	st, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
+	usracc	ld, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	nop8
+	.rept	8
+		nop
+	.endr
+	.endm
diff --git a/arch/unicore32/include/asm/barrier.h b/arch/unicore32/include/asm/barrier.h
new file mode 100644
index 00000000..a6620e53
--- /dev/null
+++ b/arch/unicore32/include/asm/barrier.h
@@ -0,0 +1,28 @@
+/*
+ * Memory barrier implementations for PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2012 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_BARRIER_H__
+#define __UNICORE_BARRIER_H__
+
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("" : : : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+
+#define mb()				barrier()
+#define rmb()				barrier()
+#define wmb()				barrier()
+#define smp_mb()			barrier()
+#define smp_rmb()			barrier()
+#define smp_wmb()			barrier()
+#define read_barrier_depends()		do { } while (0)
+#define smp_read_barrier_depends()	do { } while (0)
+
+#define set_mb(var, value)		do { var = value; smp_mb(); } while (0)
+
+#endif /* __UNICORE_BARRIER_H__ */
diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h
new file mode 100644
index 00000000..401f597b
--- /dev/null
+++ b/arch/unicore32/include/asm/bitops.h
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/unicore32/include/asm/bitops.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_BITOPS_H__
+#define __UNICORE_BITOPS_H__
+
+#define _ASM_GENERIC_BITOPS_FLS_H_
+#define _ASM_GENERIC_BITOPS___FLS_H_
+#define _ASM_GENERIC_BITOPS_FFS_H_
+#define _ASM_GENERIC_BITOPS___FFS_H_
+/*
+ * On UNICORE, those functions can be implemented around
+ * the cntlz instruction for much better code efficiency.
+ */
+
+static inline int fls(int x)
+{
+	int ret;
+
+	asm("cntlz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+	ret = 32 - ret;
+
+	return ret;
+}
+
+#define __fls(x) (fls(x) - 1)
+#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
+#define __ffs(x) (ffs(x) - 1)
+
+#include <asm-generic/bitops.h>
+
+/* following definitions: to avoid using codes in lib/find_*.c */
+#define find_next_bit		find_next_bit
+#define find_next_zero_bit	find_next_zero_bit
+#define find_first_bit		find_first_bit
+#define find_first_zero_bit	find_first_zero_bit
+
+#endif /* __UNICORE_BITOPS_H__ */
diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h
new file mode 100644
index 00000000..b1ff8cad
--- /dev/null
+++ b/arch/unicore32/include/asm/bug.h
@@ -0,0 +1,27 @@
+/*
+ * Bug handling for PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2012 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_BUG_H__
+#define __UNICORE_BUG_H__
+
+#include <asm-generic/bug.h>
+
+struct pt_regs;
+struct siginfo;
+
+extern void die(const char *msg, struct pt_regs *regs, int err);
+extern void uc32_notify_die(const char *str, struct pt_regs *regs,
+		struct siginfo *info, unsigned long err, unsigned long trap);
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+extern void __show_regs(struct pt_regs *);
+
+#endif /* __UNICORE_BUG_H__ */
diff --git a/arch/unicore32/include/asm/byteorder.h b/arch/unicore32/include/asm/byteorder.h
new file mode 100644
index 00000000..ebe1b3fe
--- /dev/null
+++ b/arch/unicore32/include/asm/byteorder.h
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/unicore32/include/asm/byteorder.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UniCore ONLY support Little Endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __UNICORE_BYTEORDER_H__
+#define __UNICORE_BYTEORDER_H__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif
+
diff --git a/arch/unicore32/include/asm/cache.h b/arch/unicore32/include/asm/cache.h
new file mode 100644
index 00000000..ad8f795d
--- /dev/null
+++ b/arch/unicore32/include/asm/cache.h
@@ -0,0 +1,27 @@
+/*
+ * linux/arch/unicore32/include/asm/cache.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CACHE_H__
+#define __UNICORE_CACHE_H__
+
+#define L1_CACHE_SHIFT		(5)
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
+
+#endif
diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h
new file mode 100644
index 00000000..c0301e6c
--- /dev/null
+++ b/arch/unicore32/include/asm/cacheflush.h
@@ -0,0 +1,211 @@
+/*
+ * linux/arch/unicore32/include/asm/cacheflush.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CACHEFLUSH_H__
+#define __UNICORE_CACHEFLUSH_H__
+
+#include <linux/mm.h>
+
+#include <asm/shmparam.h>
+
+#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
+ */
+#define PG_dcache_clean PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/unicore32/mm/cache.S files implement these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive;
+ *	start addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/cachetlb.txt for more information.
+ *	Please note that the implementation of these, and the required
+ *	effects are cache-type (VIVT/VIPT/PIPT) specific.
+ *
+ *	flush_icache_all()
+ *
+ *		Unconditionally clean and invalidate the entire icache.
+ *		Currently only needed for cache-v6.S and cache-v7.S, see
+ *		__flush_icache_all for the generic implementation.
+ *
+ *	flush_kern_all()
+ *
+ *		Unconditionally clean and invalidate the entire cache.
+ *
+ *	flush_user_all()
+ *
+ *		Clean and invalidate all user space cache entries
+ *		before a change of page tables.
+ *
+ *	flush_user_range(start, end, flags)
+ *
+ *		Clean and invalidate a range of cache entries in the
+ *		specified address space before a change of page tables.
+ *		- start - user start address (inclusive, page aligned)
+ *		- end   - user end address   (exclusive, page aligned)
+ *		- flags - vma->vm_flags field
+ *
+ *	coherent_kern_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	coherent_user_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	flush_kern_dcache_area(kaddr, size)
+ *
+ *		Ensure that the data held in page is written back.
+ *		- kaddr  - page address
+ *		- size   - region size
+ *
+ *	DMA Cache Coherency
+ *	===================
+ *
+ *	dma_flush_range(start, end)
+ *
+ *		Clean and invalidate the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ */
+
+extern void __cpuc_flush_icache_all(void);
+extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_user_all(void);
+extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
+extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern void __cpuc_flush_dcache_area(void *, size_t);
+extern void __cpuc_flush_kern_dcache_area(void *addr, size_t size);
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+extern void __cpuc_dma_clean_range(unsigned long, unsigned long);
+extern void __cpuc_dma_flush_range(unsigned long, unsigned long);
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+	unsigned long, void *, const void *, unsigned long);
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+/*
+ * Convert calls to our calling convention.
+ */
+/* Invalidate I-cache */
+static inline void __flush_icache_all(void)
+{
+	asm("movc	p0.c5, %0, #20;\n"
+	    "nop; nop; nop; nop; nop; nop; nop; nop\n"
+	    :
+	    : "r" (0));
+}
+
+#define flush_cache_all()		__cpuc_flush_kern_all()
+
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma,
+		unsigned long user_addr, unsigned long pfn);
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the UniCore private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma, start, end) \
+	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
+/*
+ * Perform necessary cache operations to ensure that data previously
+ * stored within this range of addresses can be executed by the CPU.
+ */
+#define flush_icache_range(s, e)	__cpuc_coherent_kern_range(s, e)
+
+/*
+ * Perform necessary cache operations to ensure that the TLB will
+ * see data written in the specified area.
+ */
+#define clean_dcache_area(start, size)	cpu_dcache_clean_area(start, size)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page *);
+
+#define flush_dcache_mmap_lock(mapping)			\
+	spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping)		\
+	spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma, page, addr, len)	\
+	flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here.  In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma, page)	do { } while (0)
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
+ * caches, since the direct-mappings of these pages may contain cached
+ * data, we need to do a full cache flush to ensure that writebacks
+ * don't corrupt data placed into these pages via the new mappings.
+ */
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+}
+
+#endif
diff --git a/arch/unicore32/include/asm/checksum.h b/arch/unicore32/include/asm/checksum.h
new file mode 100644
index 00000000..f55c3f93
--- /dev/null
+++ b/arch/unicore32/include/asm/checksum.h
@@ -0,0 +1,41 @@
+/*
+ * linux/arch/unicore32/include/asm/checksum.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * IP checksum routines
+ */
+#ifndef __UNICORE_CHECKSUM_H__
+#define __UNICORE_CHECKSUM_H__
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	__asm__(
+	"add.a	%0, %1, %2\n"
+	"addc.a	%0, %0, %3\n"
+	"addc.a	%0, %0, %4 << #8\n"
+	"addc.a	%0, %0, %5\n"
+	"addc	%0, %0, #0\n"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
+	: "cc");
+	return sum;
+}
+#define csum_tcpudp_nofold	csum_tcpudp_nofold
+
+#include <asm-generic/checksum.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h
new file mode 100644
index 00000000..df4d5acf
--- /dev/null
+++ b/arch/unicore32/include/asm/cmpxchg.h
@@ -0,0 +1,61 @@
+/*
+ * Atomics xchg/cmpxchg for PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2012 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CMPXCHG_H__
+#define __UNICORE_CMPXCHG_H__
+
+/*
+ * Generate a link failure on undefined symbol if the pointer points to a value
+ * of unsupported size.
+ */
+extern void __xchg_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+		int size)
+{
+	unsigned long ret;
+
+	switch (size) {
+	case 1:
+		asm volatile("swapb	%0, %1, [%2]"
+			: "=&r" (ret)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 4:
+		asm volatile("swapw	%0, %1, [%2]"
+			: "=&r" (ret)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	default:
+		ret = __xchg_bad_pointer();
+	}
+
+	return ret;
+}
+
+#define xchg(ptr, x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)					\
+		((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr),	\
+		(unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)					\
+		__cmpxchg64_local_generic((ptr), (o), (n))
+
+#include <asm-generic/cmpxchg.h>
+
+#endif /* __UNICORE_CMPXCHG_H__ */
diff --git a/arch/unicore32/include/asm/cpu-single.h b/arch/unicore32/include/asm/cpu-single.h
new file mode 100644
index 00000000..0f55d182
--- /dev/null
+++ b/arch/unicore32/include/asm/cpu-single.h
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/unicore32/include/asm/cpu-single.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CPU_SINGLE_H__
+#define __UNICORE_CPU_SINGLE_H__
+
+#include <asm/page.h>
+#include <asm/memory.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define cpu_switch_mm(pgd, mm) cpu_do_switch_mm(virt_to_phys(pgd), mm)
+
+#define cpu_get_pgd()					\
+	({						\
+		unsigned long pg;			\
+		__asm__("movc	%0, p0.c2, #0"		\
+			 : "=r" (pg) : : "cc");		\
+		pg &= ~0x0fff;				\
+		(pgd_t *)phys_to_virt(pg);		\
+	})
+
+struct mm_struct;
+
+/* declare all the functions as extern */
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte(pte_t *ptep, pte_t pte);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* __UNICORE_CPU_SINGLE_H__ */
diff --git a/arch/unicore32/include/asm/cputype.h b/arch/unicore32/include/asm/cputype.h
new file mode 100644
index 00000000..ec1a30f9
--- /dev/null
+++ b/arch/unicore32/include/asm/cputype.h
@@ -0,0 +1,33 @@
+/*
+ * linux/arch/unicore32/include/asm/cputype.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_CPUTYPE_H__
+#define __UNICORE_CPUTYPE_H__
+
+#include <linux/stringify.h>
+
+#define CPUID_CPUID	0
+#define CPUID_CACHETYPE	1
+
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("movc	%0, p0.c0, #" __stringify(reg)		\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+
+#define uc32_cpuid		read_cpuid(CPUID_CPUID)
+#define uc32_cachetype		read_cpuid(CPUID_CACHETYPE)
+
+#endif
diff --git a/arch/unicore32/include/asm/delay.h b/arch/unicore32/include/asm/delay.h
new file mode 100644
index 00000000..164ae61c
--- /dev/null
+++ b/arch/unicore32/include/asm/delay.h
@@ -0,0 +1,52 @@
+/*
+ * linux/arch/unicore32/include/asm/delay.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+#ifndef __UNICORE_DELAY_H__
+#define __UNICORE_DELAY_H__
+
+#include <asm/param.h>	/* HZ */
+
+extern void __delay(int loops);
+
+/*
+ * This function intentionally does not exist; if you see references to
+ * it, it means that you're calling udelay() with an out of range value.
+ *
+ * With currently imposed limits, this means that we support a max delay
+ * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
+ */
+extern void __bad_udelay(void);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+extern void __udelay(unsigned long usecs);
+extern void __const_udelay(unsigned long);
+
+#define MAX_UDELAY_MS 2
+
+#define udelay(n)							\
+	(__builtin_constant_p(n) ?					\
+	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :		\
+			__const_udelay((n) * ((2199023U*HZ)>>11))) :	\
+	  __udelay(n))
+
+#endif /* __UNICORE_DELAY_H__ */
+
diff --git a/arch/unicore32/include/asm/dma-mapping.h b/arch/unicore32/include/asm/dma-mapping.h
new file mode 100644
index 00000000..366460a8
--- /dev/null
+++ b/arch/unicore32/include/asm/dma-mapping.h
@@ -0,0 +1,130 @@
+/*
+ * linux/arch/unicore32/include/asm/dma-mapping.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_DMA_MAPPING_H__
+#define __UNICORE_DMA_MAPPING_H__
+
+#ifdef __KERNEL__
+
+#include <linux/mm_types.h>
+#include <linux/scatterlist.h>
+#include <linux/swiotlb.h>
+
+#include <asm-generic/dma-coherent.h>
+
+#include <asm/memory.h>
+#include <asm/cacheflush.h>
+
+extern struct dma_map_ops swiotlb_dma_map_ops;
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+	return &swiotlb_dma_map_ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+
+	return dma_ops->dma_supported(dev, mask);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	if (dma_ops->mapping_error)
+		return dma_ops->mapping_error(dev, dma_addr);
+
+	return 0;
+}
+
+#include <asm-generic/dma-mapping-common.h>
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (dev && dev->dma_mask)
+		return addr + size - 1 <= *dev->dma_mask;
+
+	return 1;
+}
+
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr;
+}
+
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+#define dma_alloc_coherent(d,s,h,f)	dma_alloc_attrs(d,s,h,f,NULL)
+
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flag,
+				    struct dma_attrs *attrs)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	return dma_ops->alloc(dev, size, dma_handle, flag, attrs);
+}
+
+#define dma_free_coherent(d,s,c,h) dma_free_attrs(d,s,c,h,NULL)
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t dma_handle,
+				  struct dma_attrs *attrs)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	dma_ops->free(dev, size, cpu_addr, dma_handle, attrs);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr,
+		size_t size, enum dma_data_direction direction)
+{
+	unsigned long start = (unsigned long)vaddr;
+	unsigned long end   = start + size;
+
+	switch (direction) {
+	case DMA_NONE:
+		BUG();
+	case DMA_FROM_DEVICE:
+	case DMA_BIDIRECTIONAL:	/* writeback and invalidate */
+		__cpuc_dma_flush_range(start, end);
+		break;
+	case DMA_TO_DEVICE:		/* writeback only */
+		__cpuc_dma_clean_range(start, end);
+		break;
+	}
+}
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/unicore32/include/asm/dma.h b/arch/unicore32/include/asm/dma.h
new file mode 100644
index 00000000..38dfff9d
--- /dev/null
+++ b/arch/unicore32/include/asm/dma.h
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/unicore32/include/asm/dma.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_DMA_H__
+#define __UNICORE_DMA_H__
+
+#include <asm/memory.h>
+#include <asm-generic/dma.h>
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#endif
+
+#endif /* __UNICORE_DMA_H__ */
diff --git a/arch/unicore32/include/asm/elf.h b/arch/unicore32/include/asm/elf.h
new file mode 100644
index 00000000..829042d0
--- /dev/null
+++ b/arch/unicore32/include/asm/elf.h
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/unicore32/include/asm/elf.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_ELF_H__
+#define __UNICORE_ELF_H__
+
+#include <asm/hwcap.h>
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/ptrace.h>
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct fp_state elf_fpregset_t;
+
+#define EM_UNICORE		110
+
+#define R_UNICORE_NONE		0
+#define R_UNICORE_PC24		1
+#define R_UNICORE_ABS32		2
+#define R_UNICORE_CALL		28
+#define R_UNICORE_JUMP24	29
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_UNICORE
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ */
+#define ELF_PLATFORM_SIZE 8
+#define ELF_PLATFORM	(elf_platform)
+
+extern char elf_platform[];
+
+struct elf32_hdr;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+extern int elf_check_arch(const struct elf32_hdr *);
+#define elf_check_arch elf_check_arch
+
+struct task_struct;
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be
+   registered with atexit, as per the SVR4 ABI.  A value of 0 means we
+   have no such handler.  */
+#define ELF_PLAT_INIT(_r, load_addr)	{(_r)->UCreg_00 = 0; }
+
+extern void elf_set_personality(const struct elf32_hdr *);
+#define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
+
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
+extern int vectors_user_mapping(void);
+#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+
+#endif
diff --git a/arch/unicore32/include/asm/exec.h b/arch/unicore32/include/asm/exec.h
new file mode 100644
index 00000000..06d1f0f5
--- /dev/null
+++ b/arch/unicore32/include/asm/exec.h
@@ -0,0 +1,15 @@
+/*
+ * Process execution bits for PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2012 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_EXEC_H__
+#define __UNICORE_EXEC_H__
+
+#define arch_align_stack(x)		(x)
+
+#endif /* __UNICORE_EXEC_H__ */
diff --git a/arch/unicore32/include/asm/fpstate.h b/arch/unicore32/include/asm/fpstate.h
new file mode 100644
index 00000000..ba97fac6
--- /dev/null
+++ b/arch/unicore32/include/asm/fpstate.h
@@ -0,0 +1,26 @@
+/*
+ * linux/arch/unicore32/include/asm/fpstate.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_FPSTATE_H__
+#define __UNICORE_FPSTATE_H__
+
+#ifndef __ASSEMBLY__
+
+#define FP_REGS_NUMBER		33
+
+struct fp_state {
+	unsigned int regs[FP_REGS_NUMBER];
+} __attribute__((aligned(8)));
+
+#endif
+
+#endif
diff --git a/arch/unicore32/include/asm/fpu-ucf64.h b/arch/unicore32/include/asm/fpu-ucf64.h
new file mode 100644
index 00000000..16c14578
--- /dev/null
+++ b/arch/unicore32/include/asm/fpu-ucf64.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/unicore32/include/asm/fpu-ucf64.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define FPSCR			s31
+
+/* FPSCR bits */
+#define FPSCR_DEFAULT_NAN	(1<<25)
+
+#define FPSCR_CMPINSTR_BIT	(1<<31)
+
+#define FPSCR_CON		(1<<29)
+#define FPSCR_TRAP		(1<<27)
+
+/* RND mode */
+#define FPSCR_ROUND_NEAREST	(0<<0)
+#define FPSCR_ROUND_PLUSINF	(2<<0)
+#define FPSCR_ROUND_MINUSINF	(3<<0)
+#define FPSCR_ROUND_TOZERO	(1<<0)
+#define FPSCR_RMODE_BIT		(0)
+#define FPSCR_RMODE_MASK	(7 << FPSCR_RMODE_BIT)
+
+/* trap enable */
+#define FPSCR_IOE		(1<<16)
+#define FPSCR_OFE		(1<<14)
+#define FPSCR_UFE		(1<<13)
+#define FPSCR_IXE		(1<<12)
+#define FPSCR_HIE		(1<<11)
+#define FPSCR_NDE		(1<<10)	/* non denomal */
+
+/* flags */
+#define FPSCR_IDC		(1<<24)
+#define FPSCR_HIC		(1<<23)
+#define FPSCR_IXC		(1<<22)
+#define FPSCR_OFC		(1<<21)
+#define FPSCR_UFC		(1<<20)
+#define FPSCR_IOC		(1<<19)
+
+/* stick bits */
+#define FPSCR_IOS		(1<<9)
+#define FPSCR_OFS		(1<<7)
+#define FPSCR_UFS		(1<<6)
+#define FPSCR_IXS		(1<<5)
+#define FPSCR_HIS		(1<<4)
+#define FPSCR_NDS		(1<<3)	/*non denomal */
diff --git a/arch/unicore32/include/asm/gpio.h b/arch/unicore32/include/asm/gpio.h
new file mode 100644
index 00000000..2716f14e
--- /dev/null
+++ b/arch/unicore32/include/asm/gpio.h
@@ -0,0 +1,104 @@
+/*
+ * linux/arch/unicore32/include/asm/gpio.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_GPIO_H__
+#define __UNICORE_GPIO_H__
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define GPI_OTP_INT             0
+#define GPI_PCI_INTA            1
+#define GPI_PCI_INTB            2
+#define GPI_PCI_INTC            3
+#define GPI_PCI_INTD            4
+#define GPI_BAT_DET             5
+#define GPI_SD_CD               6
+#define GPI_SOFF_REQ            7
+#define GPI_SD_WP               8
+#define GPI_LCD_CASE_OFF        9
+#define GPO_WIFI_EN             10
+#define GPO_HDD_LED             11
+#define GPO_VGA_EN              12
+#define GPO_LCD_EN              13
+#define GPO_LED_DATA            14
+#define GPO_LED_CLK             15
+#define GPO_CAM_PWR_EN          16
+#define GPO_LCD_VCC_EN          17
+#define GPO_SOFT_OFF            18
+#define GPO_BT_EN               19
+#define GPO_FAN_ON              20
+#define GPO_SPKR                21
+#define GPO_SET_V1              23
+#define GPO_SET_V2              24
+#define GPO_CPU_HEALTH          25
+#define GPO_LAN_SEL             26
+
+#ifdef CONFIG_PUV3_NB0916
+#define GPI_BTN_TOUCH		14
+#define GPIO_IN			0x000043ff /* 1 for input */
+#define GPIO_OUT		0x0fffbc00 /* 1 for output */
+#endif	/* CONFIG_PUV3_NB0916 */
+
+#ifdef CONFIG_PUV3_SMW0919
+#define GPIO_IN			0x000003ff /* 1 for input */
+#define GPIO_OUT		0x0ffffc00 /* 1 for output */
+#endif  /* CONFIG_PUV3_SMW0919 */
+
+#ifdef CONFIG_PUV3_DB0913
+#define GPIO_IN			0x000001df /* 1 for input */
+#define GPIO_OUT		0x03fee800 /* 1 for output */
+#endif  /* CONFIG_PUV3_DB0913 */
+
+#define GPIO_DIR                (~((GPIO_IN) | 0xf0000000))
+				/* 0 input, 1 output */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		return readl(GPIO_GPLR) & GPIO_GPIO(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		if (value)
+			writel(GPIO_GPIO(gpio), GPIO_GPSR);
+		else
+			writel(GPIO_GPIO(gpio), GPIO_GPCR);
+	else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep	__gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	if ((gpio < IRQ_GPIOHIGH) && (FIELD(1, 1, gpio) & readl(GPIO_GPIR)))
+		return IRQ_GPIOLOW0 + gpio;
+	else
+		return IRQ_GPIO0 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	if (irq < IRQ_GPIOHIGH)
+		return irq - IRQ_GPIOLOW0;
+	else
+		return irq - IRQ_GPIO0;
+}
+
+#endif /* __UNICORE_GPIO_H__ */
diff --git a/arch/unicore32/include/asm/hwcap.h b/arch/unicore32/include/asm/hwcap.h
new file mode 100644
index 00000000..97bd40fd
--- /dev/null
+++ b/arch/unicore32/include/asm/hwcap.h
@@ -0,0 +1,32 @@
+/*
+ * linux/arch/unicore32/include/asm/hwcap.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_HWCAP_H__
+#define __UNICORE_HWCAP_H__
+
+/*
+ * HWCAP flags
+ */
+#define HWCAP_MSP		1
+#define HWCAP_UNICORE16		2
+#define HWCAP_CMOV		4
+#define HWCAP_UNICORE_F64       8
+#define HWCAP_TLS		0x80
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP		(HWCAP_CMOV | HWCAP_UNICORE_F64)
+#endif
+
+#endif
diff --git a/arch/unicore32/include/asm/hwdef-copro.h b/arch/unicore32/include/asm/hwdef-copro.h
new file mode 100644
index 00000000..a3292f03
--- /dev/null
+++ b/arch/unicore32/include/asm/hwdef-copro.h
@@ -0,0 +1,48 @@
+/*
+ * Co-processor register definitions for PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2012 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_HWDEF_COPRO_H__
+#define __UNICORE_HWDEF_COPRO_H__
+
+/*
+ * Control Register bits (CP#0 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_D	(1 << 2)	/* Dcache enable			*/
+#define CR_I	(1 << 3)	/* Icache enable			*/
+#define CR_B	(1 << 4)	/* Dcache write mechanism: write back	*/
+#define CR_T	(1 << 5)	/* Burst enable				*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+
+#ifndef __ASSEMBLY__
+
+#define vectors_high()		(cr_alignment & CR_V)
+
+extern unsigned long cr_no_alignment;	/* defined in entry.S */
+extern unsigned long cr_alignment;	/* defined in entry.S */
+
+static inline unsigned int get_cr(void)
+{
+	unsigned int val;
+	asm("movc %0, p0.c1, #0" : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+	asm volatile("movc p0.c1, %0, #0" : : "r" (val) : "cc");
+	isb();
+}
+
+extern void adjust_cr(unsigned long mask, unsigned long set);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __UNICORE_HWDEF_COPRO_H__ */
diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
new file mode 100644
index 00000000..39decb6e
--- /dev/null
+++ b/arch/unicore32/include/asm/io.h
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/unicore32/include/asm/io.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_IO_H__
+#define __UNICORE_IO_H__
+
+#ifdef __KERNEL__
+
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+
+#define PCI_IOBASE	PKUNITY_PCILIO_BASE
+#include <asm-generic/io.h>
+
+/*
+ * __uc32_ioremap and __uc32_ioremap_cached takes CPU physical address.
+ */
+extern void __iomem *__uc32_ioremap(unsigned long, size_t);
+extern void __iomem *__uc32_ioremap_cached(unsigned long, size_t);
+extern void __uc32_iounmap(volatile void __iomem *addr);
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/io-mapping.txt.
+ *
+ */
+#define ioremap(cookie, size)		__uc32_ioremap(cookie, size)
+#define ioremap_cached(cookie, size)	__uc32_ioremap_cached(cookie, size)
+#define ioremap_nocache(cookie, size)	__uc32_ioremap(cookie, size)
+#define iounmap(cookie)			__uc32_iounmap(cookie)
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET		(unsigned int)(PCI_IOBASE)
+#define PIO_MASK		(unsigned int)(IO_SPACE_LIMIT)
+#define PIO_RESERVED		(PIO_OFFSET + PIO_MASK + 1)
+
+#endif	/* __KERNEL__ */
+#endif	/* __UNICORE_IO_H__ */
diff --git a/arch/unicore32/include/asm/irq.h b/arch/unicore32/include/asm/irq.h
new file mode 100644
index 00000000..baea93e2
--- /dev/null
+++ b/arch/unicore32/include/asm/irq.h
@@ -0,0 +1,105 @@
+/*
+ * linux/arch/unicore32/include/asm/irq.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_IRQ_H__
+#define __UNICORE_IRQ_H__
+
+#include <asm-generic/irq.h>
+
+#define	IRQ_GPIOLOW0		0x00
+#define	IRQ_GPIOLOW1		0x01
+#define	IRQ_GPIOLOW2		0x02
+#define	IRQ_GPIOLOW3		0x03
+#define	IRQ_GPIOLOW4		0x04
+#define	IRQ_GPIOLOW5		0x05
+#define	IRQ_GPIOLOW6		0x06
+#define	IRQ_GPIOLOW7		0x07
+#define IRQ_GPIOHIGH		0x08
+#define IRQ_USB			0x09
+#define IRQ_SDC			0x0a
+#define IRQ_AC97		0x0b
+#define IRQ_SATA		0x0c
+#define IRQ_MME			0x0d
+#define IRQ_PCI_BRIDGE		0x0e
+#define	IRQ_DDR			0x0f
+#define	IRQ_SPI			0x10
+#define	IRQ_UNIGFX		0x11
+#define	IRQ_I2C			0x11
+#define	IRQ_UART1		0x12
+#define	IRQ_UART0		0x13
+#define IRQ_UMAL		0x14
+#define IRQ_NAND		0x15
+#define IRQ_PS2_KBD		0x16
+#define IRQ_PS2_AUX		0x17
+#define IRQ_DMA			0x18
+#define IRQ_DMAERR		0x19
+#define	IRQ_TIMER0		0x1a
+#define	IRQ_TIMER1		0x1b
+#define	IRQ_TIMER2		0x1c
+#define	IRQ_TIMER3		0x1d
+#define	IRQ_RTC			0x1e
+#define	IRQ_RTCAlarm		0x1f
+
+#define	IRQ_GPIO0		0x20
+#define	IRQ_GPIO1		0x21
+#define	IRQ_GPIO2		0x22
+#define	IRQ_GPIO3		0x23
+#define	IRQ_GPIO4		0x24
+#define	IRQ_GPIO5		0x25
+#define	IRQ_GPIO6		0x26
+#define	IRQ_GPIO7		0x27
+#define IRQ_GPIO8		0x28
+#define IRQ_GPIO9		0x29
+#define IRQ_GPIO10		0x2a
+#define IRQ_GPIO11		0x2b
+#define IRQ_GPIO12		0x2c
+#define IRQ_GPIO13		0x2d
+#define IRQ_GPIO14		0x2e
+#define IRQ_GPIO15		0x2f
+#define IRQ_GPIO16		0x30
+#define IRQ_GPIO17		0x31
+#define IRQ_GPIO18		0x32
+#define IRQ_GPIO19		0x33
+#define IRQ_GPIO20		0x34
+#define IRQ_GPIO21		0x35
+#define IRQ_GPIO22		0x36
+#define IRQ_GPIO23		0x37
+#define IRQ_GPIO24		0x38
+#define IRQ_GPIO25		0x39
+#define IRQ_GPIO26		0x3a
+#define IRQ_GPIO27		0x3b
+
+#ifdef CONFIG_ARCH_FPGA
+#define IRQ_PCIINTA             IRQ_GPIOLOW2
+#define IRQ_PCIINTB             IRQ_GPIOLOW1
+#define IRQ_PCIINTC             IRQ_GPIOLOW0
+#define IRQ_PCIINTD             IRQ_GPIOLOW6
+#endif
+
+#if defined(CONFIG_PUV3_DB0913) || defined(CONFIG_PUV3_NB0916)	\
+	|| defined(CONFIG_PUV3_SMW0919)
+#define IRQ_PCIINTA             IRQ_GPIOLOW1
+#define IRQ_PCIINTB             IRQ_GPIOLOW2
+#define IRQ_PCIINTC             IRQ_GPIOLOW3
+#define IRQ_PCIINTD             IRQ_GPIOLOW4
+#endif
+
+#define IRQ_SD_CD               IRQ_GPIO6 /* falling or rising trigger */
+
+#ifndef __ASSEMBLY__
+struct pt_regs;
+
+extern void asm_do_IRQ(unsigned int, struct pt_regs *);
+
+#endif
+
+#endif
+
diff --git a/arch/unicore32/include/asm/irqflags.h b/arch/unicore32/include/asm/irqflags.h
new file mode 100644
index 00000000..6d8a28df
--- /dev/null
+++ b/arch/unicore32/include/asm/irqflags.h
@@ -0,0 +1,53 @@
+/*
+ * linux/arch/unicore32/include/asm/irqflags.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_IRQFLAGS_H__
+#define __UNICORE_IRQFLAGS_H__
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+#define ARCH_IRQ_DISABLED	(PRIV_MODE | PSR_I_BIT)
+#define ARCH_IRQ_ENABLED	(PRIV_MODE)
+
+/*
+ * Save the current interrupt enable state.
+ */
+static inline unsigned long arch_local_save_flags(void)
+{
+	unsigned long temp;
+
+	asm volatile("mov %0, asr" : "=r" (temp) : : "memory", "cc");
+
+	return temp & PSR_c;
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long temp;
+
+	asm volatile(
+		"mov	%0, asr\n"
+		"mov.a	asr, %1\n"
+		"mov.f	asr, %0"
+		: "=&r" (temp)
+		: "r" (flags)
+		: "memory", "cc");
+}
+
+#include <asm-generic/irqflags.h>
+
+#endif
+#endif
diff --git a/arch/unicore32/include/asm/linkage.h b/arch/unicore32/include/asm/linkage.h
new file mode 100644
index 00000000..d1618bd3
--- /dev/null
+++ b/arch/unicore32/include/asm/linkage.h
@@ -0,0 +1,22 @@
+/*
+ * linux/arch/unicore32/include/asm/linkage.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_LINKAGE_H__
+#define __UNICORE_LINKAGE_H__
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#define ENDPROC(name) \
+	.type name, %function; \
+	END(name)
+
+#endif
diff --git a/arch/unicore32/include/asm/memblock.h b/arch/unicore32/include/asm/memblock.h
new file mode 100644
index 00000000..a8a5d8d0
--- /dev/null
+++ b/arch/unicore32/include/asm/memblock.h
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/unicore32/include/asm/memblock.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_MEMBLOCK_H__
+#define __UNICORE_MEMBLOCK_H__
+
+/*
+ * Memory map description
+ */
+# define NR_BANKS 8
+
+struct membank {
+	unsigned long start;
+	unsigned long size;
+	unsigned int highmem;
+};
+
+struct meminfo {
+	int nr_banks;
+	struct membank bank[NR_BANKS];
+};
+
+extern struct meminfo meminfo;
+
+#define for_each_bank(iter, mi)				\
+	for (iter = 0; iter < (mi)->nr_banks; iter++)
+
+#define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
+#define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
+#define bank_pfn_size(bank)	((bank)->size >> PAGE_SHIFT)
+#define bank_phys_start(bank)	((bank)->start)
+#define bank_phys_end(bank)	((bank)->start + (bank)->size)
+#define bank_phys_size(bank)	((bank)->size)
+
+extern void uc32_memblock_init(struct meminfo *);
+
+#endif
diff --git a/arch/unicore32/include/asm/memory.h b/arch/unicore32/include/asm/memory.h
new file mode 100644
index 00000000..5eddb997
--- /dev/null
+++ b/arch/unicore32/include/asm/memory.h
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/unicore32/include/asm/memory.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __UNICORE_MEMORY_H__
+#define __UNICORE_MEMORY_H__
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <asm/sizes.h>
+#include <mach/memory.h>
+
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#define UL(x) _AC(x, UL)
+
+/*
+ * PAGE_OFFSET - the virtual address of the start of the kernel image
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
+ */
+#define PAGE_OFFSET		UL(0xC0000000)
+#define TASK_SIZE		(PAGE_OFFSET - UL(0x41000000))
+#define TASK_UNMAPPED_BASE	(PAGE_OFFSET / 3)
+
+/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
+#if TASK_SIZE > MODULES_VADDR
+#error Top of user space clashes with start of module space
+#endif
+
+#define MODULES_END		(PAGE_OFFSET)
+
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER	24
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+
+/*
+ * Convert a physical address to a Page Frame Number and back
+ */
+#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
+#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
+#ifndef __ASSEMBLY__
+
+#ifndef arch_adjust_zones
+#define arch_adjust_zones(size, holes) do { } while (0)
+#endif
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && \
+		(unsigned long)(kaddr) < (unsigned long)high_memory)
+
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/mmu.h b/arch/unicore32/include/asm/mmu.h
new file mode 100644
index 00000000..66fa341d
--- /dev/null
+++ b/arch/unicore32/include/asm/mmu.h
@@ -0,0 +1,17 @@
+/*
+ * linux/arch/unicore32/include/asm/mmu.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_MMU_H__
+#define __UNICORE_MMU_H__
+
+typedef	unsigned long mm_context_t;
+
+#endif
diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h
new file mode 100644
index 00000000..fb5e4c65
--- /dev/null
+++ b/arch/unicore32/include/asm/mmu_context.h
@@ -0,0 +1,87 @@
+/*
+ * linux/arch/unicore32/include/asm/mmu_context.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_MMU_CONTEXT_H__
+#define __UNICORE_MMU_CONTEXT_H__
+
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpu-single.h>
+
+#define init_new_context(tsk, mm)	0
+
+#define destroy_context(mm)		do { } while (0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.  We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next)
+		cpu_switch_mm(next->pgd, next);
+}
+
+#define deactivate_mm(tsk, mm)	do { } while (0)
+#define activate_mm(prev, next)	switch_mm(prev, next, NULL)
+
+/*
+ * We are inserting a "fake" vma for the user-accessible vector page so
+ * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
+ * But we also want to remove it before the generic code gets to see it
+ * during process exit or the unmapping of it would  cause total havoc.
+ * (the macro is used as remove_vma() is static to mm/mmap.c)
+ */
+#define arch_exit_mmap(mm) \
+do { \
+	struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
+	if (high_vma) { \
+		BUG_ON(high_vma->vm_next);  /* it should be last */ \
+		if (high_vma->vm_prev) \
+			high_vma->vm_prev->vm_next = NULL; \
+		else \
+			mm->mmap = NULL; \
+		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
+		mm->mmap_cache = NULL; \
+		mm->map_count--; \
+		remove_vma(high_vma); \
+	} \
+} while (0)
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+}
+
+#endif
diff --git a/arch/unicore32/include/asm/mutex.h b/arch/unicore32/include/asm/mutex.h
new file mode 100644
index 00000000..fab7d0e8
--- /dev/null
+++ b/arch/unicore32/include/asm/mutex.h
@@ -0,0 +1,20 @@
+/*
+ * linux/arch/unicore32/include/asm/mutex.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UniCore optimized mutex locking primitives
+ *
+ * Please look into asm-generic/mutex-xchg.h for a formal definition.
+ */
+#ifndef __UNICORE_MUTEX_H__
+#define __UNICORE_MUTEX_H__
+
+# include <asm-generic/mutex-xchg.h>
+#endif
diff --git a/arch/unicore32/include/asm/page.h b/arch/unicore32/include/asm/page.h
new file mode 100644
index 00000000..594b3226
--- /dev/null
+++ b/arch/unicore32/include/asm/page.h
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/unicore32/include/asm/page.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PAGE_H__
+#define __UNICORE_PAGE_H__
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+struct page;
+struct vm_area_struct;
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+extern void copy_page(void *to, const void *from);
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) })
+#define __pgd(x)	((pgd_t) { (x) })
+#define __pgprot(x)     ((pgprot_t) { (x) })
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pgd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pgd(x)	(x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+typedef struct page *pgtable_t;
+
+extern int pfn_valid(unsigned long);
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/getorder.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
new file mode 100644
index 00000000..f5e108f4
--- /dev/null
+++ b/arch/unicore32/include/asm/pci.h
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/unicore32/include/asm/pci.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PCI_H__
+#define __UNICORE_PCI_H__
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci-bridge.h>
+#include <asm-generic/pci.h>
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+	enum pci_mmap_state mmap_state, int write_combine);
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/unicore32/include/asm/pgalloc.h b/arch/unicore32/include/asm/pgalloc.h
new file mode 100644
index 00000000..0213e373
--- /dev/null
+++ b/arch/unicore32/include/asm/pgalloc.h
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/unicore32/include/asm/pgalloc.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PGALLOC_H__
+#define __UNICORE_PGALLOC_H__
+
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache()		do { } while (0)
+
+#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_PRESENT)
+#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_PRESENT)
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
+
+#define pgd_alloc(mm)			get_pgd_slow(mm)
+#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
+
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
+/*
+ * Allocate one PTE table.
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
+	if (pte)
+		clean_dcache_area(pte, PTRS_PER_PTE * sizeof(pte_t));
+
+	return pte;
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte;
+
+	pte = alloc_pages(PGALLOC_GFP, 0);
+	if (pte) {
+		if (!PageHighMem(pte)) {
+			void *page = page_address(pte);
+			clean_dcache_area(page, PTRS_PER_PTE * sizeof(pte_t));
+		}
+		pgtable_page_ctor(pte);
+	}
+
+	return pte;
+}
+
+/*
+ * Free one PTE table.
+ */
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	if (pte)
+		free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
+{
+	set_pmd(pmdp, __pmd(pmdval));
+	flush_pmd_entry(pmdp);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	unsigned long pte_ptr = (unsigned long)ptep;
+
+	/*
+	 * The pmd must be loaded with the physical
+	 * address of the PTE table
+	 */
+	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+	__pmd_populate(pmdp,
+			page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif
diff --git a/arch/unicore32/include/asm/pgtable-hwdef.h b/arch/unicore32/include/asm/pgtable-hwdef.h
new file mode 100644
index 00000000..7314e859
--- /dev/null
+++ b/arch/unicore32/include/asm/pgtable-hwdef.h
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/unicore32/include/asm/pgtable-hwdef.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PGTABLE_HWDEF_H__
+#define __UNICORE_PGTABLE_HWDEF_H__
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1 descriptor (PMD)
+ *   - common
+ */
+#define PMD_TYPE_MASK		(3 << 0)
+#define PMD_TYPE_TABLE		(0 << 0)
+/*#define PMD_TYPE_LARGE	(1 << 0) */
+#define PMD_TYPE_INVALID	(2 << 0)
+#define PMD_TYPE_SECT		(3 << 0)
+
+#define PMD_PRESENT		(1 << 2)
+#define PMD_YOUNG		(1 << 3)
+
+/*#define PMD_SECT_DIRTY	(1 << 4) */
+#define PMD_SECT_CACHEABLE	(1 << 5)
+#define PMD_SECT_EXEC		(1 << 6)
+#define PMD_SECT_WRITE		(1 << 7)
+#define PMD_SECT_READ		(1 << 8)
+
+/*
+ * + Level 2 descriptor (PTE)
+ *   - common
+ */
+#define PTE_TYPE_MASK		(3 << 0)
+#define PTE_TYPE_SMALL		(0 << 0)
+#define PTE_TYPE_MIDDLE		(1 << 0)
+#define PTE_TYPE_LARGE		(2 << 0)
+#define PTE_TYPE_INVALID	(3 << 0)
+
+#define PTE_PRESENT		(1 << 2)
+#define PTE_FILE		(1 << 3)	/* only when !PRESENT */
+#define PTE_YOUNG		(1 << 3)
+#define PTE_DIRTY		(1 << 4)
+#define PTE_CACHEABLE		(1 << 5)
+#define PTE_EXEC		(1 << 6)
+#define PTE_WRITE		(1 << 7)
+#define PTE_READ		(1 << 8)
+
+#endif
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h
new file mode 100644
index 00000000..68b2f297
--- /dev/null
+++ b/arch/unicore32/include/asm/pgtable.h
@@ -0,0 +1,317 @@
+/*
+ * linux/arch/unicore32/include/asm/pgtable.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PGTABLE_H__
+#define __UNICORE_PGTABLE_H__
+
+#include <asm-generic/pgtable-nopmd.h>
+#include <asm/cpu-single.h>
+
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * Note that platforms may override VMALLOC_START, but they must provide
+ * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
+ * which may not overlap IO space.
+ */
+#ifndef VMALLOC_START
+#define VMALLOC_OFFSET		SZ_8M
+#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) \
+					& ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END		(0xff000000UL)
+#endif
+
+#define PTRS_PER_PTE		1024
+#define PTRS_PER_PGD		1024
+
+/*
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGDIR_SHIFT		22
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#endif /* !__ASSEMBLY__ */
+
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * This is the lowest virtual address we can permit any user space
+ * mapping to be mapped at.  This is particularly important for
+ * non-high vector CPUs.
+ */
+#define FIRST_USER_ADDRESS	PAGE_SIZE
+
+#define FIRST_USER_PGD_NR	1
+#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		22
+#define SECTION_SIZE		(1UL << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable bits based on memory policy, as well as any
+ * architecture dependent bits.
+ */
+#define _PTE_DEFAULT		(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE)
+
+extern pgprot_t pgprot_user;
+extern pgprot_t pgprot_kernel;
+
+#define PAGE_NONE		pgprot_user
+#define PAGE_SHARED		__pgprot(pgprot_val(pgprot_user | PTE_READ \
+								| PTE_WRITE)
+#define PAGE_SHARED_EXEC	__pgprot(pgprot_val(pgprot_user | PTE_READ \
+								| PTE_WRITE \
+								| PTE_EXEC)
+#define PAGE_COPY		__pgprot(pgprot_val(pgprot_user | PTE_READ)
+#define PAGE_COPY_EXEC		__pgprot(pgprot_val(pgprot_user | PTE_READ \
+								| PTE_EXEC)
+#define PAGE_READONLY		__pgprot(pgprot_val(pgprot_user | PTE_READ)
+#define PAGE_READONLY_EXEC	__pgprot(pgprot_val(pgprot_user | PTE_READ \
+								| PTE_EXEC)
+#define PAGE_KERNEL		pgprot_kernel
+#define PAGE_KERNEL_EXEC	__pgprot(pgprot_val(pgprot_kernel | PTE_EXEC))
+
+#define __PAGE_NONE		__pgprot(_PTE_DEFAULT)
+#define __PAGE_SHARED		__pgprot(_PTE_DEFAULT | PTE_READ \
+							| PTE_WRITE)
+#define __PAGE_SHARED_EXEC	__pgprot(_PTE_DEFAULT | PTE_READ \
+							| PTE_WRITE \
+							| PTE_EXEC)
+#define __PAGE_COPY		__pgprot(_PTE_DEFAULT | PTE_READ)
+#define __PAGE_COPY_EXEC	__pgprot(_PTE_DEFAULT | PTE_READ \
+							| PTE_EXEC)
+#define __PAGE_READONLY		__pgprot(_PTE_DEFAULT | PTE_READ)
+#define __PAGE_READONLY_EXEC	__pgprot(_PTE_DEFAULT | PTE_READ \
+							| PTE_EXEC)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version.  These get translated into the best that the
+ * architecture can perform.  Note that on UniCore hardware:
+ *  1) We cannot do execute protection
+ *  2) If we could do execute protection, then read is implied
+ *  3) write implies read permissions
+ */
+#define __P000  __PAGE_NONE
+#define __P001  __PAGE_READONLY
+#define __P010  __PAGE_COPY
+#define __P011  __PAGE_COPY
+#define __P100  __PAGE_READONLY_EXEC
+#define __P101  __PAGE_READONLY_EXEC
+#define __P110  __PAGE_COPY_EXEC
+#define __P111  __PAGE_COPY_EXEC
+
+#define __S000  __PAGE_NONE
+#define __S001  __PAGE_READONLY
+#define __S010  __PAGE_SHARED
+#define __S011  __PAGE_SHARED
+#define __S100  __PAGE_READONLY_EXEC
+#define __S101  __PAGE_READONLY_EXEC
+#define __S110  __PAGE_SHARED_EXEC
+#define __S111  __PAGE_SHARED_EXEC
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)		(empty_zero_page)
+
+#define pte_pfn(pte)			(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)		(__pte(((pfn) << PAGE_SHIFT) \
+						| pgprot_val(prot)))
+
+#define pte_none(pte)			(!pte_val(pte))
+#define pte_clear(mm, addr, ptep)	set_pte(ptep, __pte(0))
+#define pte_page(pte)			(pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir, addr)	(pmd_page_vaddr(*(dir)) \
+						+ __pte_index(addr))
+
+#define pte_offset_map(dir, addr)	(pmd_page_vaddr(*(dir)) \
+						+ __pte_index(addr))
+#define pte_unmap(pte)			do { } while (0)
+
+#define set_pte(ptep, pte)	cpu_set_pte(ptep, pte)
+
+#define set_pte_at(mm, addr, ptep, pteval)	\
+	do {					\
+		set_pte(ptep, pteval);          \
+	} while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present(pte)	(pte_val(pte) & PTE_PRESENT)
+#define pte_write(pte)		(pte_val(pte) & PTE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & PTE_YOUNG)
+#define pte_exec(pte)		(pte_val(pte) & PTE_EXEC)
+#define pte_special(pte)	(0)
+
+#define PTE_BIT_FUNC(fn, op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, &= ~PTE_WRITE);
+PTE_BIT_FUNC(mkwrite,   |= PTE_WRITE);
+PTE_BIT_FUNC(mkclean,   &= ~PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty,   |= PTE_DIRTY);
+PTE_BIT_FUNC(mkold,     &= ~PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung,   |= PTE_YOUNG);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Mark the prot value as uncacheable.
+ */
+#define pgprot_noncached(prot)		\
+	__pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
+#define pgprot_writecombine(prot)	\
+	__pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
+#define pgprot_dmacoherent(prot)	\
+	__pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd) & PMD_PRESENT)
+#define pmd_bad(pmd)		(((pmd_val(pmd) &		\
+				(PMD_PRESENT | PMD_TYPE_MASK))	\
+				!= (PMD_PRESENT | PMD_TYPE_TABLE)))
+
+#define set_pmd(pmdpd, pmdval)		\
+	do {				\
+		*(pmdpd) = pmdval;	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		set_pmd(pmdp, __pmd(0));\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+#define pmd_page_vaddr(pmd) ((pte_t *)__va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	const unsigned long mask = PTE_EXEC | PTE_WRITE | PTE_READ;
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------> <--- type --> 0 0 0 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
+ */
+#define __SWP_TYPE_SHIFT	5
+#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT)		\
+				& __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type, offset) ((swp_entry_t) {			\
+				((type) << __SWP_TYPE_SHIFT) |		\
+				((offset) << __SWP_OFFSET_SHIFT) })
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK()	\
+	BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <----------------------- offset ----------------------> 1 0 0 0
+ */
+#define pte_file(pte)		(pte_val(pte) & PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 4)
+#define pgoff_to_pte(x)		__pte(((x) << 4) | PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	28
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr)	(1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma, from, pfn, size, prot)	\
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __UNICORE_PGTABLE_H__ */
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
new file mode 100644
index 00000000..f0d780a5
--- /dev/null
+++ b/arch/unicore32/include/asm/processor.h
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/unicore32/include/asm/processor.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_PROCESSOR_H__
+#define __UNICORE_PROCESSOR_H__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+struct debug_entry {
+	u32			address;
+	u32			insn;
+};
+
+struct debug_info {
+	int			nsaved;
+	struct debug_entry	bp[2];
+};
+
+struct thread_struct {
+							/* fault info	  */
+	unsigned long		address;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+							/* debugging	  */
+	struct debug_info	debug;
+};
+
+#define INIT_THREAD  {	}
+
+#define start_thread(regs, pc, sp)					\
+({									\
+	unsigned long *stack = (unsigned long *)sp;			\
+	memset(regs->uregs, 0, sizeof(regs->uregs));			\
+	regs->UCreg_asr = USER_MODE;					\
+	regs->UCreg_pc = pc & ~1;	/* pc */                        \
+	regs->UCreg_sp = sp;		/* sp */                        \
+	regs->UCreg_02 = stack[2];	/* r2 (envp) */                 \
+	regs->UCreg_01 = stack[1];	/* r1 (argv) */                 \
+	regs->UCreg_00 = stack[0];	/* r0 (argc) */                 \
+})
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	(task_pt_regs(tsk)->UCreg_pc)
+#define KSTK_ESP(tsk)	(task_pt_regs(tsk)->UCreg_sp)
+
+#endif
+
+#endif /* __UNICORE_PROCESSOR_H__ */
diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h
new file mode 100644
index 00000000..b9caf9b0
--- /dev/null
+++ b/arch/unicore32/include/asm/ptrace.h
@@ -0,0 +1,133 @@
+/*
+ * linux/arch/unicore32/include/asm/ptrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_PTRACE_H__
+#define __UNICORE_PTRACE_H__
+
+#define PTRACE_GET_THREAD_AREA	22
+
+/*
+ * PSR bits
+ */
+#define USER_MODE	0x00000010
+#define REAL_MODE	0x00000011
+#define INTR_MODE	0x00000012
+#define PRIV_MODE	0x00000013
+#define ABRT_MODE	0x00000017
+#define EXTN_MODE	0x0000001b
+#define SUSR_MODE	0x0000001f
+#define MODE_MASK	0x0000001f
+#define PSR_R_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_S_BIT	0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+	unsigned long uregs[34];
+};
+
+#define UCreg_asr		uregs[32]
+#define UCreg_pc		uregs[31]
+#define UCreg_lr		uregs[30]
+#define UCreg_sp		uregs[29]
+#define UCreg_ip		uregs[28]
+#define UCreg_fp		uregs[27]
+#define UCreg_26		uregs[26]
+#define UCreg_25		uregs[25]
+#define UCreg_24		uregs[24]
+#define UCreg_23		uregs[23]
+#define UCreg_22		uregs[22]
+#define UCreg_21		uregs[21]
+#define UCreg_20		uregs[20]
+#define UCreg_19		uregs[19]
+#define UCreg_18		uregs[18]
+#define UCreg_17		uregs[17]
+#define UCreg_16		uregs[16]
+#define UCreg_15		uregs[15]
+#define UCreg_14		uregs[14]
+#define UCreg_13		uregs[13]
+#define UCreg_12		uregs[12]
+#define UCreg_11		uregs[11]
+#define UCreg_10		uregs[10]
+#define UCreg_09		uregs[9]
+#define UCreg_08		uregs[8]
+#define UCreg_07		uregs[7]
+#define UCreg_06		uregs[6]
+#define UCreg_05		uregs[5]
+#define UCreg_04		uregs[4]
+#define UCreg_03		uregs[3]
+#define UCreg_02		uregs[2]
+#define UCreg_01		uregs[1]
+#define UCreg_00		uregs[0]
+#define UCreg_ORIG_00		uregs[33]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs)	\
+	(processor_mode(regs) == USER_MODE)
+
+#define processor_mode(regs) \
+	((regs)->UCreg_asr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->UCreg_asr & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->UCreg_asr & PSR_R_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	unsigned long mode = regs->UCreg_asr & MODE_MASK;
+
+	/*
+	 * Always clear the R (REAL) bits
+	 */
+	regs->UCreg_asr &= ~(PSR_R_BIT);
+
+	if ((regs->UCreg_asr & PSR_I_BIT) == 0) {
+		if (mode == USER_MODE)
+			return 1;
+	}
+
+	/*
+	 * Force ASR to something logical...
+	 */
+	regs->UCreg_asr &= PSR_f | USER_MODE;
+
+	return 0;
+}
+
+#define instruction_pointer(regs)	((regs)->UCreg_pc)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/arch/unicore32/include/asm/sigcontext.h b/arch/unicore32/include/asm/sigcontext.h
new file mode 100644
index 00000000..6a2d7671
--- /dev/null
+++ b/arch/unicore32/include/asm/sigcontext.h
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/unicore32/include/asm/sigcontext.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_SIGCONTEXT_H__
+#define __UNICORE_SIGCONTEXT_H__
+
+#include <asm/ptrace.h>
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	unsigned long trap_no;
+	unsigned long error_code;
+	unsigned long oldmask;
+	unsigned long fault_address;
+	struct pt_regs regs;
+};
+
+#endif
diff --git a/arch/unicore32/include/asm/stacktrace.h b/arch/unicore32/include/asm/stacktrace.h
new file mode 100644
index 00000000..76edc65a
--- /dev/null
+++ b/arch/unicore32/include/asm/stacktrace.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/unicore32/include/asm/stacktrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_STACKTRACE_H__
+#define __UNICORE_STACKTRACE_H__
+
+struct stackframe {
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long lr;
+	unsigned long pc;
+};
+
+#ifdef CONFIG_FRAME_POINTER
+extern int unwind_frame(struct stackframe *frame);
+#else
+#define unwind_frame(f) (-EINVAL)
+#endif
+extern void walk_stackframe(struct stackframe *frame,
+			    int (*fn)(struct stackframe *, void *), void *data);
+
+#endif	/* __UNICORE_STACKTRACE_H__ */
diff --git a/arch/unicore32/include/asm/string.h b/arch/unicore32/include/asm/string.h
new file mode 100644
index 00000000..55264c84
--- /dev/null
+++ b/arch/unicore32/include/asm/string.h
@@ -0,0 +1,38 @@
+/*
+ * linux/arch/unicore32/include/asm/string.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_STRING_H__
+#define __UNICORE_STRING_H__
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char *strrchr(const char *s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char *strchr(const char *s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, __kernel_size_t);
+
+#endif
diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h
new file mode 100644
index 00000000..65bad75c
--- /dev/null
+++ b/arch/unicore32/include/asm/suspend.h
@@ -0,0 +1,29 @@
+/*
+ * linux/arch/unicore32/include/asm/suspend.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_SUSPEND_H__
+#define __UNICORE_SUSPEND_H__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+	struct cpu_context_save	cpu_context;	/* cpu context */
+#ifdef CONFIG_UNICORE_FPU_F64
+	struct fp_state		fpstate __attribute__((aligned(8)));
+#endif
+};
+#endif
+
+#endif /* __UNICORE_SUSPEND_H__ */
+
diff --git a/arch/unicore32/include/asm/switch_to.h b/arch/unicore32/include/asm/switch_to.h
new file mode 100644
index 00000000..39572d2b
--- /dev/null
+++ b/arch/unicore32/include/asm/switch_to.h
@@ -0,0 +1,30 @@
+/*
+ * Task switching for PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2012 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_SWITCH_TO_H__
+#define __UNICORE_SWITCH_TO_H__
+
+struct task_struct;
+struct thread_info;
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.  schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *,
+		struct thread_info *, struct thread_info *);
+
+#define switch_to(prev, next, last)					\
+	do {								\
+		last = __switch_to(prev, task_thread_info(prev),	\
+					task_thread_info(next));	\
+	} while (0)
+
+#endif /* __UNICORE_SWITCH_TO_H__ */
diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h
new file mode 100644
index 00000000..89f75575
--- /dev/null
+++ b/arch/unicore32/include/asm/thread_info.h
@@ -0,0 +1,152 @@
+/*
+ * linux/arch/unicore32/include/asm/thread_info.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_THREAD_INFO_H__
+#define __UNICORE_THREAD_INFO_H__
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192
+#define THREAD_START_SP		(THREAD_SIZE - 8)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/types.h>
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+struct cpu_context_save {
+	__u32	r4;
+	__u32	r5;
+	__u32	r6;
+	__u32	r7;
+	__u32	r8;
+	__u32	r9;
+	__u32	r10;
+	__u32	r11;
+	__u32	r12;
+	__u32	r13;
+	__u32	r14;
+	__u32	r15;
+	__u32	r16;
+	__u32	r17;
+	__u32	r18;
+	__u32	r19;
+	__u32	r20;
+	__u32	r21;
+	__u32	r22;
+	__u32	r23;
+	__u32	r24;
+	__u32	r25;
+	__u32	r26;
+	__u32	fp;
+	__u32	sp;
+	__u32	pc;
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	int			preempt_count;	/* 0 => preemptable */
+						/* <0 => bug */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			cpu;		/* cpu */
+	struct cpu_context_save	cpu_context;	/* cpu context */
+	__u32			syscall;	/* syscall number */
+	__u8			used_cp[16];	/* thread used copro */
+#ifdef CONFIG_UNICORE_FPU_F64
+	struct fp_state		fpstate __attribute__((aligned(8)));
+#endif
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
+	.addr_limit	= KERNEL_DS,					\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall,			\
+	},								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
+#define thread_saved_sp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occurring.  See <asm/hardirq.h>.
+ */
+#define PREEMPT_ACTIVE	0x40000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_NOTIFY_RESUME	- callback before returning to user
+ */
+#define TIF_SIGPENDING		0
+#define TIF_NEED_RESCHED	1
+#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
+#define TIF_SYSCALL_TRACE	8
+#define TIF_MEMDIE		18
+#define TIF_RESTORE_SIGMASK	20
+
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK		0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __UNICORE_THREAD_INFO_H__ */
diff --git a/arch/unicore32/include/asm/timex.h b/arch/unicore32/include/asm/timex.h
new file mode 100644
index 00000000..faf16ba4
--- /dev/null
+++ b/arch/unicore32/include/asm/timex.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/unicore32/include/asm/timex.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UNICORE_TIMEX_H__
+#define __UNICORE_TIMEX_H__
+
+#ifdef	CONFIG_ARCH_FPGA
+
+/* in FPGA, APB clock is 33M, and OST clock is 32K, */
+/* so, 1M is selected for timer interrupt correctly */
+#define	CLOCK_TICK_RATE		(32*1024)
+
+#endif
+
+#if defined(CONFIG_PUV3_DB0913)		\
+	|| defined(CONFIG_PUV3_NB0916)	\
+	|| defined(CONFIG_PUV3_SMW0919)
+
+#define  CLOCK_TICK_RATE         (14318000)
+
+#endif
+
+#include <asm-generic/timex.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/tlb.h b/arch/unicore32/include/asm/tlb.h
new file mode 100644
index 00000000..9cca15cd
--- /dev/null
+++ b/arch/unicore32/include/asm/tlb.h
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/unicore32/include/asm/tlb.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_TLB_H__
+#define __UNICORE_TLB_H__
+
+#define tlb_start_vma(tlb, vma)				do { } while (0)
+#define tlb_end_vma(tlb, vma)				do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#define __pte_free_tlb(tlb, pte, addr)				\
+	do {							\
+		pgtable_page_dtor(pte);				\
+		tlb_remove_page((tlb), (pte));			\
+	} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif
diff --git a/arch/unicore32/include/asm/tlbflush.h b/arch/unicore32/include/asm/tlbflush.h
new file mode 100644
index 00000000..e446ac8b
--- /dev/null
+++ b/arch/unicore32/include/asm/tlbflush.h
@@ -0,0 +1,195 @@
+/*
+ * linux/arch/unicore32/include/asm/tlbflush.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_TLBFLUSH_H__
+#define __UNICORE_TLBFLUSH_H__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long,
+					struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/unicore/mm/tlb-*.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it
+ *	needs to determine if it should invalidate the TLB for each
+ *	call.  Start addresses are inclusive and end addresses are
+ *	exclusive; it is safe to round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified
+ *		address space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+
+static inline void local_flush_tlb_all(void)
+{
+	const int zero = 0;
+
+	/* TLB invalidate all */
+	asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (zero) : "cc");
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	const int zero = 0;
+
+	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
+		/* TLB invalidate all */
+		asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+			: : "r" (zero) : "cc");
+	}
+	put_cpu();
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+		/* iTLB invalidate page */
+		asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
+			: : "r" (uaddr & PAGE_MASK) : "cc");
+		/* dTLB invalidate page */
+		asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
+			: : "r" (uaddr & PAGE_MASK) : "cc");
+#else
+		/* TLB invalidate all */
+		asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+			: : "r" (uaddr & PAGE_MASK) : "cc");
+#endif
+	}
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+	/* iTLB invalidate page */
+	asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (kaddr & PAGE_MASK) : "cc");
+	/* dTLB invalidate page */
+	asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (kaddr & PAGE_MASK) : "cc");
+#else
+	/* TLB invalidate all */
+	asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (kaddr & PAGE_MASK) : "cc");
+#endif
+}
+
+/*
+ *	flush_pmd_entry
+ *
+ *	Flush a PMD entry (word aligned, or double-word aligned) to
+ *	RAM if the TLB for the CPU we are running on requires this.
+ *	This is typically used when we are creating PMD entries.
+ *
+ *	clean_pmd_entry
+ *
+ *	Clean (but don't drain the write buffer) if the CPU requires
+ *	these operations.  This is typically used when we are removing
+ *	PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	/* flush dcache line, see dcacheline_flush in proc-macros.S */
+	asm("mov	r1, %0 << #20\n"
+		"ldw	r2, =_stext\n"
+		"add	r2, r2, r1 >> #20\n"
+		"ldw	r1, [r2+], #0x0000\n"
+		"ldw	r1, [r2+], #0x1000\n"
+		"ldw	r1, [r2+], #0x2000\n"
+		"ldw	r1, [r2+], #0x3000\n"
+		: : "r" (pmd) : "r1", "r2");
+#else
+	/* flush dcache all */
+	asm("movc p0.c5, %0, #14; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (pmd) : "cc");
+#endif
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	/* clean dcache line */
+	asm("movc p0.c5, %0, #11; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (__pa(pmd) & ~(L1_CACHE_BYTES - 1)) : "cc");
+#else
+	/* clean dcache all */
+	asm("movc p0.c5, %0, #10; nop; nop; nop; nop; nop; nop; nop; nop"
+		: : "r" (pmd) : "cc");
+#endif
+}
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define local_flush_tlb_range(vma, start, end)	\
+	__cpu_flush_user_tlb_range(start, end, vma)
+#define local_flush_tlb_kernel_range(s, e)	\
+	__cpu_flush_kern_tlb_range(s, e)
+
+#define flush_tlb_all		local_flush_tlb_all
+#define flush_tlb_mm		local_flush_tlb_mm
+#define flush_tlb_page		local_flush_tlb_page
+#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
+#define flush_tlb_range		local_flush_tlb_range
+#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
+
+/*
+ * if PG_dcache_clean is not set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+		unsigned long addr, pte_t *ptep);
+
+extern void do_bad_area(unsigned long addr, unsigned int fsr,
+		struct pt_regs *regs);
+
+#endif
+
+#endif
diff --git a/arch/unicore32/include/asm/traps.h b/arch/unicore32/include/asm/traps.h
new file mode 100644
index 00000000..66e17a72
--- /dev/null
+++ b/arch/unicore32/include/asm/traps.h
@@ -0,0 +1,21 @@
+/*
+ * linux/arch/unicore32/include/asm/traps.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_TRAP_H__
+#define __UNICORE_TRAP_H__
+
+extern void __init early_trap_init(void);
+extern void dump_backtrace_entry(unsigned long where,
+		unsigned long from, unsigned long frame);
+
+extern void do_DataAbort(unsigned long addr, unsigned int fsr,
+		 struct pt_regs *regs);
+#endif
diff --git a/arch/unicore32/include/asm/uaccess.h b/arch/unicore32/include/asm/uaccess.h
new file mode 100644
index 00000000..897e11ad
--- /dev/null
+++ b/arch/unicore32/include/asm/uaccess.h
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/unicore32/include/asm/uaccess.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_UACCESS_H__
+#define __UNICORE_UACCESS_H__
+
+#include <linux/thread_info.h>
+#include <linux/errno.h>
+
+#include <asm/memory.h>
+
+#define __copy_from_user	__copy_from_user
+#define __copy_to_user		__copy_to_user
+#define __strncpy_from_user	__strncpy_from_user
+#define __strnlen_user		__strnlen_user
+#define __clear_user		__clear_user
+
+#define __kernel_ok		(segment_eq(get_fs(), KERNEL_DS))
+#define __user_ok(addr, size)	(((size) <= TASK_SIZE)			\
+				&& ((addr) <= TASK_SIZE - (size)))
+#define __access_ok(addr, size)	(__kernel_ok || __user_ok((addr), (size)))
+
+extern unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check
+__clear_user(void __user *addr, unsigned long n);
+extern unsigned long __must_check
+__strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long
+__strnlen_user(const char __user *s, long n);
+
+#include <asm-generic/uaccess.h>
+
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif /* __UNICORE_UACCESS_H__ */
diff --git a/arch/unicore32/include/asm/unistd.h b/arch/unicore32/include/asm/unistd.h
new file mode 100644
index 00000000..9b242801
--- /dev/null
+++ b/arch/unicore32/include/asm/unistd.h
@@ -0,0 +1,18 @@
+/*
+ * linux/arch/unicore32/include/asm/unistd.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#if !defined(__UNICORE_UNISTD_H__) || defined(__SYSCALL)
+#define __UNICORE_UNISTD_H__
+
+/* Use the standard ABI for syscalls. */
+#include <asm-generic/unistd.h>
+
+#endif /* __UNICORE_UNISTD_H__ */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
new file mode 100644
index 00000000..8040d575
--- /dev/null
+++ b/arch/unicore32/include/mach/PKUnity.h
@@ -0,0 +1,98 @@
+/*
+ * linux/arch/unicore32/include/mach/PKUnity.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __MACH_PUV3_HARDWARE_H__
+#error You must include hardware.h not PKUnity.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * Memory Definitions
+ */
+#define PKUNITY_SDRAM_BASE		0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */
+#define PKUNITY_MMIO_BASE		0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
+
+/*
+ * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
+ * 0x80000000 - 0x8000000B 12B    PCI Configuration regs
+ * 0x80010000 - 0x80010250 592B   PCI Bridge Base
+ * 0x80030000 - 0x8003FFFF 64KB   PCI Legacy IO
+ * 0x90000000 - 0x97FFFFFF 128MB  PCI AHB-PCI MEM-mapping
+ * 0x98000000 - 0x9FFFFFFF 128MB  PCI PCI-AHB MEM-mapping
+ */
+#define PKUNITY_PCI_BASE		io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */
+#include "regs-pci.h"
+
+#define PKUNITY_PCICFG_BASE		(PKUNITY_PCI_BASE + 0x0)
+#define PKUNITY_PCIBRI_BASE		(PKUNITY_PCI_BASE + 0x00010000)
+#define PKUNITY_PCILIO_BASE		(PKUNITY_PCI_BASE + 0x00030000)
+#define PKUNITY_PCIMEM_BASE		(PKUNITY_PCI_BASE + 0x10000000)
+#define PKUNITY_PCIAHB_BASE		(PKUNITY_PCI_BASE + 0x18000000)
+
+/*
+ * PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB)
+ */
+#define PKUNITY_AHB_BASE		io_p2v(0xC0000000)
+
+/* AHB-0 is DDR2 SDRAM */
+/* AHB-1 is PCI Space */
+#define PKUNITY_ARBITER_BASE		(PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */
+#define PKUNITY_DDR2CTRL_BASE		(PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */
+#define PKUNITY_DMAC_BASE		(PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */
+#include "regs-dmac.h"
+#define PKUNITY_UMAL_BASE		(PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */
+#include "regs-umal.h"
+#define PKUNITY_USB_BASE		(PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */
+#define PKUNITY_SATA_BASE		(PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */
+#define PKUNITY_SMC_BASE		(PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */
+/* AHB-9 is for APB bridge */
+#define PKUNITY_MME_BASE		(PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */
+#define PKUNITY_UNIGFX_BASE		(PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */
+#include "regs-unigfx.h"
+#define PKUNITY_NAND_BASE		(PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */
+#include "regs-nand.h"
+#define PKUNITY_H264D_BASE		(PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */
+#define PKUNITY_H264E_BASE		(PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */
+
+/*
+ * PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB)
+ */
+#define PKUNITY_APB_BASE		io_p2v(0xEE000000)
+
+#define PKUNITY_UART0_BASE		(PKUNITY_APB_BASE + 0x000000) /* APB-0 */
+#define PKUNITY_UART1_BASE		(PKUNITY_APB_BASE + 0x100000) /* APB-1 */
+#include "regs-uart.h"
+#define PKUNITY_I2C_BASE		(PKUNITY_APB_BASE + 0x200000) /* APB-2 */
+#include "regs-i2c.h"
+#define PKUNITY_SPI_BASE		(PKUNITY_APB_BASE + 0x300000) /* APB-3 */
+#include "regs-spi.h"
+#define PKUNITY_AC97_BASE		(PKUNITY_APB_BASE + 0x400000) /* APB-4 */
+#include "regs-ac97.h"
+#define PKUNITY_GPIO_BASE		(PKUNITY_APB_BASE + 0x500000) /* APB-5 */
+#include "regs-gpio.h"
+#define PKUNITY_INTC_BASE		(PKUNITY_APB_BASE + 0x600000) /* APB-6 */
+#include "regs-intc.h"
+#define PKUNITY_RTC_BASE		(PKUNITY_APB_BASE + 0x700000) /* APB-7 */
+#include "regs-rtc.h"
+#define PKUNITY_OST_BASE		(PKUNITY_APB_BASE + 0x800000) /* APB-8 */
+#include "regs-ost.h"
+#define PKUNITY_RESETC_BASE		(PKUNITY_APB_BASE + 0x900000) /* APB-9 */
+#include "regs-resetc.h"
+#define PKUNITY_PM_BASE			(PKUNITY_APB_BASE + 0xA00000) /* APB-10 */
+#include "regs-pm.h"
+#define PKUNITY_PS2_BASE		(PKUNITY_APB_BASE + 0xB00000) /* APB-11 */
+#include "regs-ps2.h"
+#define PKUNITY_SDC_BASE		(PKUNITY_APB_BASE + 0xC00000) /* APB-12 */
+#include "regs-sdc.h"
+
diff --git a/arch/unicore32/include/mach/bitfield.h b/arch/unicore32/include/mach/bitfield.h
new file mode 100644
index 00000000..128a7028
--- /dev/null
+++ b/arch/unicore32/include/mach/bitfield.h
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/unicore32/include/mach/bitfield.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_PUV3_BITFIELD_H__
+#define __MACH_PUV3_BITFIELD_H__
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+#define FIELD(val, vmask, vshift)	(((val) & ((UData(1) << (vmask)) - 1)) << (vshift))
+#define FMASK(vmask, vshift)		(((UData(1) << (vmask)) - 1) << (vshift))
+
+#endif /* __MACH_PUV3_BITFIELD_H__ */
diff --git a/arch/unicore32/include/mach/dma.h b/arch/unicore32/include/mach/dma.h
new file mode 100644
index 00000000..d655c1b6
--- /dev/null
+++ b/arch/unicore32/include/mach/dma.h
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/unicore32/include/mach/dma.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_PUV3_DMA_H__
+#define __MACH_PUV3_DMA_H__
+
+/*
+ * The PKUnity has six internal DMA channels.
+ */
+#define MAX_DMA_CHANNELS	6
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} puv3_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+extern int puv3_request_dma(char *name,
+			 puv3_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void (*err_handler)(int, void *),
+			 void *data);
+
+extern void puv3_free_dma(int dma_ch);
+
+static inline void puv3_stop_dma(int ch)
+{
+	writel(readl(DMAC_CONFIG(ch)) & ~DMAC_CONFIG_EN, DMAC_CONFIG(ch));
+}
+
+static inline void puv3_resume_dma(int ch)
+{
+	writel(readl(DMAC_CONFIG(ch)) | DMAC_CONFIG_EN, DMAC_CONFIG(ch));
+}
+
+#endif /* __MACH_PUV3_DMA_H__ */
diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h
new file mode 100644
index 00000000..930bea6e
--- /dev/null
+++ b/arch/unicore32/include/mach/hardware.h
@@ -0,0 +1,38 @@
+/*
+ * linux/arch/unicore32/include/mach/hardware.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions for PKUnity architecture
+ */
+
+#ifndef __MACH_PUV3_HARDWARE_H__
+#define __MACH_PUV3_HARDWARE_H__
+
+#include "PKUnity.h"
+
+#ifndef __ASSEMBLY__
+#define io_p2v(x)	(void __iomem *)((x) - PKUNITY_MMIO_BASE)
+#define io_v2p(x)	(phys_addr_t)((x) + PKUNITY_MMIO_BASE)
+#else
+#define io_p2v(x)	((x) - PKUNITY_MMIO_BASE)
+#define io_v2p(x)	((x) + PKUNITY_MMIO_BASE)
+#endif
+
+#define PCIBIOS_MIN_IO			0x4000 /* should lower than 64KB */
+#define PCIBIOS_MIN_MEM			io_v2p(PKUNITY_PCIMEM_BASE)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define	HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses()	1
+
+#endif  /* __MACH_PUV3_HARDWARE_H__ */
diff --git a/arch/unicore32/include/mach/map.h b/arch/unicore32/include/mach/map.h
new file mode 100644
index 00000000..55c93657
--- /dev/null
+++ b/arch/unicore32/include/mach/map.h
@@ -0,0 +1,20 @@
+/*
+ * linux/arch/unicore32/include/mach/map.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Page table mapping constructs and function prototypes
+ */
+#define MT_DEVICE		0
+#define MT_DEVICE_CACHED	2
+#define MT_KUSER		7
+#define MT_HIGH_VECTORS		8
+#define MT_MEMORY		9
+#define MT_ROM			10
+
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
new file mode 100644
index 00000000..4be72c21
--- /dev/null
+++ b/arch/unicore32/include/mach/memory.h
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/unicore32/include/mach/memory.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_PUV3_MEMORY_H__
+#define __MACH_PUV3_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/* Physical DRAM offset. */
+#define PHYS_OFFSET	UL(0x00000000)
+/* The base address of exception vectors. */
+#define VECTORS_BASE	UL(0xffff0000)
+/* The base address of kuser area. */
+#define KUSER_BASE	UL(0x80000000)
+
+#ifdef __ASSEMBLY__
+/* The byte offset of the kernel image in RAM from the start of RAM. */
+#define KERNEL_IMAGE_START	0x00408000
+#endif
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void puv3_pci_adjust_zones(unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(size, holes) \
+	puv3_pci_adjust_zones(size, holes)
+
+#endif
+
+/*
+ * PCI controller in PKUnity-3 masks highest 5-bit for upstream channel,
+ * so we must limit the DMA allocation within 128M physical memory for
+ * supporting PCI devices.
+ */
+#define PCI_DMA_THRESHOLD	(PHYS_OFFSET + SZ_128M - 1)
+
+#define is_pcibus_device(dev)	(dev &&			\
+				(strncmp(dev->bus->name, "pci", 3) == 0))
+
+#define __virt_to_pcibus(x)     (__virt_to_phys((x) + PKUNITY_PCIAHB_BASE))
+#define __pcibus_to_virt(x)     (__phys_to_virt(x) - PKUNITY_PCIAHB_BASE)
+
+/* kuser area */
+#define KUSER_VECPAGE_BASE	(KUSER_BASE + UL(0x3fff0000))
+/* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
+#define kuser_vecpage_to_vectors(x)	((x) - (KUSER_VECPAGE_BASE)	\
+					+ (VECTORS_BASE))
+
+#endif
diff --git a/arch/unicore32/include/mach/ocd.h b/arch/unicore32/include/mach/ocd.h
new file mode 100644
index 00000000..189fd71b
--- /dev/null
+++ b/arch/unicore32/include/mach/ocd.h
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/unicore32/include/mach/ocd.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_PUV3_OCD_H__
+#define __MACH_PUV3_OCD_H__
+
+#if defined(CONFIG_DEBUG_OCD)
+static inline void ocd_putc(unsigned int c)
+{
+	int status, i = 0x2000000;
+
+	do {
+		if (--i < 0)
+			return;
+
+		asm volatile ("movc %0, p1.c0, #0" : "=r" (status));
+	} while (status & 2);
+
+	asm("movc p1.c1, %0, #1" : : "r" (c));
+}
+
+#define putc(ch)	ocd_putc(ch)
+#else
+#define putc(ch)
+#endif
+
+#endif
diff --git a/arch/unicore32/include/mach/pm.h b/arch/unicore32/include/mach/pm.h
new file mode 100644
index 00000000..4dcd34ae
--- /dev/null
+++ b/arch/unicore32/include/mach/pm.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/unicore/include/mach/pm.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PUV3_PM_H__
+#define __PUV3_PM_H__
+
+#include <linux/suspend.h>
+
+struct puv3_cpu_pm_fns {
+	int	save_count;
+	void	(*save)(unsigned long *);
+	void	(*restore)(unsigned long *);
+	int	(*valid)(suspend_state_t state);
+	void	(*enter)(suspend_state_t state);
+	int	(*prepare)(void);
+	void	(*finish)(void);
+};
+
+extern struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
+
+/* sleep.S */
+extern void puv3_cpu_suspend(unsigned int);
+
+extern void puv3_cpu_resume(void);
+
+extern int puv3_pm_enter(suspend_state_t state);
+
+/* Defined in hibernate_asm.S */
+extern int restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist);
+
+/* References to section boundaries */
+extern const void __nosave_begin, __nosave_end;
+
+extern struct pbe *restore_pblist;
+#endif
diff --git a/arch/unicore32/include/mach/regs-ac97.h b/arch/unicore32/include/mach/regs-ac97.h
new file mode 100644
index 00000000..b7563e9d
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-ac97.h
@@ -0,0 +1,32 @@
+/*
+ * PKUnity AC97 Registers
+ */
+
+#define PKUNITY_AC97_CONR		(PKUNITY_AC97_BASE + 0x0000)
+#define PKUNITY_AC97_OCR		(PKUNITY_AC97_BASE + 0x0004)
+#define PKUNITY_AC97_ICR		(PKUNITY_AC97_BASE + 0x0008)
+#define PKUNITY_AC97_CRAC		(PKUNITY_AC97_BASE + 0x000C)
+#define PKUNITY_AC97_INTR		(PKUNITY_AC97_BASE + 0x0010)
+#define PKUNITY_AC97_INTRSTAT		(PKUNITY_AC97_BASE + 0x0014)
+#define PKUNITY_AC97_INTRCLEAR		(PKUNITY_AC97_BASE + 0x0018)
+#define PKUNITY_AC97_ENABLE		(PKUNITY_AC97_BASE + 0x001C)
+#define PKUNITY_AC97_OUT_FIFO		(PKUNITY_AC97_BASE + 0x0020)
+#define PKUNITY_AC97_IN_FIFO		(PKUNITY_AC97_BASE + 0x0030)
+
+#define AC97_CODEC_REG(v)               FIELD((v), 7, 16)
+#define AC97_CODEC_VAL(v)               FIELD((v), 16, 0)
+#define AC97_CODEC_WRITECOMPLETE        FIELD(1, 1, 2)
+
+/*
+ * VAR PLAY SAMPLE RATE
+ */
+#define AC97_CMD_VPSAMPLE		(FIELD(3, 2, 16) | FIELD(3, 2, 0))
+
+/*
+ * FIX CAPTURE SAMPLE RATE
+ */
+#define AC97_CMD_FCSAMPLE		FIELD(7, 3, 0)
+
+#define AC97_CMD_RESET			FIELD(1, 1, 0)
+#define AC97_CMD_ENABLE			FIELD(1, 1, 0)
+#define AC97_CMD_DISABLE		FIELD(0, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-dmac.h b/arch/unicore32/include/mach/regs-dmac.h
new file mode 100644
index 00000000..66de9e7d
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-dmac.h
@@ -0,0 +1,81 @@
+/*
+ * PKUnity Direct Memory Access Controller (DMAC)
+ */
+
+/*
+ * Interrupt Status Reg DMAC_ISR.
+ */
+#define DMAC_ISR		(PKUNITY_DMAC_BASE + 0x0020)
+/*
+ * Interrupt Transfer Complete Status Reg DMAC_ITCSR.
+ */
+#define DMAC_ITCSR		(PKUNITY_DMAC_BASE + 0x0050)
+/*
+ * Interrupt Transfer Complete Clear Reg DMAC_ITCCR.
+ */
+#define DMAC_ITCCR		(PKUNITY_DMAC_BASE + 0x0060)
+/*
+ * Interrupt Error Status Reg DMAC_IESR.
+ */
+#define DMAC_IESR		(PKUNITY_DMAC_BASE + 0x0080)
+/*
+ * Interrupt Error Clear Reg DMAC_IECR.
+ */
+#define DMAC_IECR		(PKUNITY_DMAC_BASE + 0x0090)
+/*
+ * Enable Channels Reg DMAC_ENCH.
+ */
+#define DMAC_ENCH		(PKUNITY_DMAC_BASE + 0x00B0)
+
+/*
+ * DMA control reg. Space [byte]
+ */
+#define DMASp                   0x00000100
+
+/*
+ * Source Addr DMAC_SRCADDR(ch).
+ */
+#define DMAC_SRCADDR(ch)	(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00)
+/*
+ * Destination Addr DMAC_DESTADDR(ch).
+ */
+#define DMAC_DESTADDR(ch)	(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04)
+/*
+ * Control Reg DMAC_CONTROL(ch).
+ */
+#define DMAC_CONTROL(ch)	(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C)
+/*
+ * Configuration Reg DMAC_CONFIG(ch).
+ */
+#define DMAC_CONFIG(ch)		(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10)
+
+#define DMAC_IR_MASK            FMASK(6, 0)
+/*
+ * select channel (ch)
+ */
+#define DMAC_CHANNEL(ch)	FIELD(1, 1, (ch))
+
+#define DMAC_CONTROL_SIZE_BYTE(v)       (FIELD((v), 12, 14) | \
+					FIELD(0, 3, 9) | FIELD(0, 3, 6))
+#define DMAC_CONTROL_SIZE_HWORD(v)      (FIELD((v) >> 1, 12, 14) | \
+					FIELD(1, 3, 9) | FIELD(1, 3, 6))
+#define DMAC_CONTROL_SIZE_WORD(v)       (FIELD((v) >> 2, 12, 14) | \
+					FIELD(2, 3, 9) | FIELD(2, 3, 6))
+#define DMAC_CONTROL_DI                 FIELD(1, 1, 13)
+#define DMAC_CONTROL_SI                 FIELD(1, 1, 12)
+#define DMAC_CONTROL_BURST_1BYTE        (FIELD(0, 3, 3) | FIELD(0, 3, 0))
+#define DMAC_CONTROL_BURST_4BYTE        (FIELD(3, 3, 3) | FIELD(3, 3, 0))
+#define DMAC_CONTROL_BURST_8BYTE        (FIELD(5, 3, 3) | FIELD(5, 3, 0))
+#define DMAC_CONTROL_BURST_16BYTE       (FIELD(7, 3, 3) | FIELD(7, 3, 0))
+
+#define	DMAC_CONFIG_UART0_WR    (FIELD(2, 4, 11) | FIELD(1, 2, 1))
+#define	DMAC_CONFIG_UART0_RD    (FIELD(2, 4, 7)  | FIELD(2, 2, 1))
+#define	DMAC_CONFIG_UART1_WR    (FIELD(3, 4, 11) | FIELD(1, 2, 1))
+#define	DMAC_CONFIG_UART1RD     (FIELD(3, 4, 7)  | FIELD(2, 2, 1))
+#define	DMAC_CONFIG_AC97WR      (FIELD(4, 4, 11) | FIELD(1, 2, 1))
+#define	DMAC_CONFIG_AC97RD      (FIELD(4, 4, 7)  | FIELD(2, 2, 1))
+#define	DMAC_CONFIG_MMCWR       (FIELD(7, 4, 11) | FIELD(1, 2, 1))
+#define	DMAC_CONFIG_MMCRD       (FIELD(7, 4, 7)  | FIELD(2, 2, 1))
+#define DMAC_CONFIG_MASKITC     FIELD(1, 1, 4)
+#define DMAC_CONFIG_MASKIE      FIELD(1, 1, 3)
+#define DMAC_CONFIG_EN          FIELD(1, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-gpio.h b/arch/unicore32/include/mach/regs-gpio.h
new file mode 100644
index 00000000..0273b861
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-gpio.h
@@ -0,0 +1,70 @@
+/*
+ * PKUnity General-Purpose Input/Output (GPIO) Registers
+ */
+
+/*
+ * Voltage Status Reg GPIO_GPLR.
+ */
+#define GPIO_GPLR	(PKUNITY_GPIO_BASE + 0x0000)
+/*
+ * Pin Direction Reg GPIO_GPDR.
+ */
+#define GPIO_GPDR	(PKUNITY_GPIO_BASE + 0x0004)
+/*
+ * Output Pin Set Reg GPIO_GPSR.
+ */
+#define GPIO_GPSR	(PKUNITY_GPIO_BASE + 0x0008)
+/*
+ * Output Pin Clear Reg GPIO_GPCR.
+ */
+#define GPIO_GPCR	(PKUNITY_GPIO_BASE + 0x000C)
+/*
+ * Raise Edge Detect Reg GPIO_GRER.
+ */
+#define GPIO_GRER	(PKUNITY_GPIO_BASE + 0x0010)
+/*
+ * Fall Edge Detect Reg GPIO_GFER.
+ */
+#define GPIO_GFER	(PKUNITY_GPIO_BASE + 0x0014)
+/*
+ * Edge Status Reg GPIO_GEDR.
+ */
+#define GPIO_GEDR	(PKUNITY_GPIO_BASE + 0x0018)
+/*
+ * Sepcial Voltage Detect Reg GPIO_GPIR.
+ */
+#define GPIO_GPIR	(PKUNITY_GPIO_BASE + 0x0020)
+
+#define GPIO_MIN	(0)
+#define GPIO_MAX	(27)
+
+#define GPIO_GPIO(Nb)	(0x00000001 << (Nb))	/* GPIO [0..27] */
+#define GPIO_GPIO0	GPIO_GPIO(0)	/* GPIO  [0] */
+#define GPIO_GPIO1	GPIO_GPIO(1)	/* GPIO  [1] */
+#define GPIO_GPIO2	GPIO_GPIO(2)	/* GPIO  [2] */
+#define GPIO_GPIO3	GPIO_GPIO(3)	/* GPIO  [3] */
+#define GPIO_GPIO4	GPIO_GPIO(4)	/* GPIO  [4] */
+#define GPIO_GPIO5	GPIO_GPIO(5)	/* GPIO  [5] */
+#define GPIO_GPIO6	GPIO_GPIO(6)	/* GPIO  [6] */
+#define GPIO_GPIO7	GPIO_GPIO(7)	/* GPIO  [7] */
+#define GPIO_GPIO8	GPIO_GPIO(8)	/* GPIO  [8] */
+#define GPIO_GPIO9	GPIO_GPIO(9)	/* GPIO  [9] */
+#define GPIO_GPIO10	GPIO_GPIO(10)	/* GPIO [10] */
+#define GPIO_GPIO11	GPIO_GPIO(11)	/* GPIO [11] */
+#define GPIO_GPIO12	GPIO_GPIO(12)	/* GPIO [12] */
+#define GPIO_GPIO13	GPIO_GPIO(13)	/* GPIO [13] */
+#define GPIO_GPIO14	GPIO_GPIO(14)	/* GPIO [14] */
+#define GPIO_GPIO15	GPIO_GPIO(15)	/* GPIO [15] */
+#define GPIO_GPIO16	GPIO_GPIO(16)	/* GPIO [16] */
+#define GPIO_GPIO17	GPIO_GPIO(17)	/* GPIO [17] */
+#define GPIO_GPIO18	GPIO_GPIO(18)	/* GPIO [18] */
+#define GPIO_GPIO19	GPIO_GPIO(19)	/* GPIO [19] */
+#define GPIO_GPIO20	GPIO_GPIO(20)	/* GPIO [20] */
+#define GPIO_GPIO21	GPIO_GPIO(21)	/* GPIO [21] */
+#define GPIO_GPIO22	GPIO_GPIO(22)	/* GPIO [22] */
+#define GPIO_GPIO23	GPIO_GPIO(23)	/* GPIO [23] */
+#define GPIO_GPIO24	GPIO_GPIO(24)	/* GPIO [24] */
+#define GPIO_GPIO25	GPIO_GPIO(25)	/* GPIO [25] */
+#define GPIO_GPIO26	GPIO_GPIO(26)	/* GPIO [26] */
+#define GPIO_GPIO27	GPIO_GPIO(27)	/* GPIO [27] */
+
diff --git a/arch/unicore32/include/mach/regs-i2c.h b/arch/unicore32/include/mach/regs-i2c.h
new file mode 100644
index 00000000..463d108f
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PKUnity Inter-integrated Circuit (I2C) Registers
+ */
+
+/*
+ * Control Reg I2C_CON.
+ */
+#define I2C_CON		(PKUNITY_I2C_BASE + 0x0000)
+/*
+ * Target Address Reg I2C_TAR.
+ */
+#define I2C_TAR		(PKUNITY_I2C_BASE + 0x0004)
+/*
+ * Data buffer and command Reg I2C_DATACMD.
+ */
+#define I2C_DATACMD	(PKUNITY_I2C_BASE + 0x0010)
+/*
+ * Enable Reg I2C_ENABLE.
+ */
+#define I2C_ENABLE	(PKUNITY_I2C_BASE + 0x006C)
+/*
+ * Status Reg I2C_STATUS.
+ */
+#define I2C_STATUS	(PKUNITY_I2C_BASE + 0x0070)
+/*
+ * Tx FIFO Length Reg I2C_TXFLR.
+ */
+#define I2C_TXFLR	(PKUNITY_I2C_BASE + 0x0074)
+/*
+ * Rx FIFO Length Reg I2C_RXFLR.
+ */
+#define I2C_RXFLR	(PKUNITY_I2C_BASE + 0x0078)
+/*
+ * Enable Status Reg I2C_ENSTATUS.
+ */
+#define I2C_ENSTATUS	(PKUNITY_I2C_BASE + 0x009C)
+
+#define I2C_CON_MASTER          FIELD(1, 1, 0)
+#define I2C_CON_SPEED_STD       FIELD(1, 2, 1)
+#define I2C_CON_SPEED_FAST      FIELD(2, 2, 1)
+#define I2C_CON_RESTART         FIELD(1, 1, 5)
+#define I2C_CON_SLAVEDISABLE    FIELD(1, 1, 6)
+
+#define I2C_DATACMD_READ        FIELD(1, 1, 8)
+#define I2C_DATACMD_WRITE       FIELD(0, 1, 8)
+#define I2C_DATACMD_DAT_MASK    FMASK(8, 0)
+#define I2C_DATACMD_DAT(v)      FIELD((v), 8, 0)
+
+#define I2C_ENABLE_ENABLE       FIELD(1, 1, 0)
+#define I2C_ENABLE_DISABLE      FIELD(0, 1, 0)
+
+#define I2C_STATUS_RFF          FIELD(1, 1, 4)
+#define I2C_STATUS_RFNE         FIELD(1, 1, 3)
+#define I2C_STATUS_TFE          FIELD(1, 1, 2)
+#define I2C_STATUS_TFNF         FIELD(1, 1, 1)
+#define I2C_STATUS_ACTIVITY     FIELD(1, 1, 0)
+
+#define I2C_ENSTATUS_ENABLE	FIELD(1, 1, 0)
+
+#define I2C_TAR_THERMAL	0x4f
+#define I2C_TAR_SPD	0x50
+#define I2C_TAR_PWIC    0x55
+#define I2C_TAR_EEPROM	0x57
diff --git a/arch/unicore32/include/mach/regs-intc.h b/arch/unicore32/include/mach/regs-intc.h
new file mode 100644
index 00000000..25648f89
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-intc.h
@@ -0,0 +1,28 @@
+/*
+ * PKUNITY Interrupt Controller (INTC) Registers
+ */
+/*
+ * INTC Level Reg INTC_ICLR.
+ */
+#define INTC_ICLR	(PKUNITY_INTC_BASE + 0x0000)
+/*
+ * INTC Mask Reg INTC_ICMR.
+ */
+#define INTC_ICMR	(PKUNITY_INTC_BASE + 0x0004)
+/*
+ * INTC Pending Reg INTC_ICPR.
+ */
+#define INTC_ICPR	(PKUNITY_INTC_BASE + 0x0008)
+/*
+ * INTC IRQ Pending Reg INTC_ICIP.
+ */
+#define INTC_ICIP	(PKUNITY_INTC_BASE + 0x000C)
+/*
+ * INTC REAL Pending Reg INTC_ICFP.
+ */
+#define INTC_ICFP	(PKUNITY_INTC_BASE + 0x0010)
+/*
+ * INTC Control Reg INTC_ICCR.
+ */
+#define INTC_ICCR	(PKUNITY_INTC_BASE + 0x0014)
+
diff --git a/arch/unicore32/include/mach/regs-nand.h b/arch/unicore32/include/mach/regs-nand.h
new file mode 100644
index 00000000..a7c5563b
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-nand.h
@@ -0,0 +1,79 @@
+/*
+ * PKUnity NAND Controller Registers
+ */
+/*
+ * ID Reg. 0 NAND_IDR0
+ */
+#define NAND_IDR0	(PKUNITY_NAND_BASE + 0x0000)
+/*
+ * ID Reg. 1 NAND_IDR1
+ */
+#define NAND_IDR1	(PKUNITY_NAND_BASE + 0x0004)
+/*
+ * ID Reg. 2 NAND_IDR2
+ */
+#define NAND_IDR2	(PKUNITY_NAND_BASE + 0x0008)
+/*
+ * ID Reg. 3 NAND_IDR3
+ */
+#define NAND_IDR3	(PKUNITY_NAND_BASE + 0x000C)
+/*
+ * Page Address Reg 0 NAND_PAR0
+ */
+#define NAND_PAR0	(PKUNITY_NAND_BASE + 0x0010)
+/*
+ * Page Address Reg 1 NAND_PAR1
+ */
+#define NAND_PAR1	(PKUNITY_NAND_BASE + 0x0014)
+/*
+ * Page Address Reg 2 NAND_PAR2
+ */
+#define NAND_PAR2	(PKUNITY_NAND_BASE + 0x0018)
+/*
+ * ECC Enable Reg NAND_ECCEN
+ */
+#define NAND_ECCEN	(PKUNITY_NAND_BASE + 0x001C)
+/*
+ * Buffer Reg NAND_BUF
+ */
+#define NAND_BUF	(PKUNITY_NAND_BASE + 0x0020)
+/*
+ * ECC Status Reg NAND_ECCSR
+ */
+#define NAND_ECCSR	(PKUNITY_NAND_BASE + 0x0024)
+/*
+ * Command Reg NAND_CMD
+ */
+#define NAND_CMD	(PKUNITY_NAND_BASE + 0x0028)
+/*
+ * DMA Configure Reg NAND_DMACR
+ */
+#define NAND_DMACR	(PKUNITY_NAND_BASE + 0x002C)
+/*
+ * Interrupt Reg NAND_IR
+ */
+#define NAND_IR		(PKUNITY_NAND_BASE + 0x0030)
+/*
+ * Interrupt Mask Reg NAND_IMR
+ */
+#define NAND_IMR	(PKUNITY_NAND_BASE + 0x0034)
+/*
+ * Chip Enable Reg NAND_CHIPEN
+ */
+#define NAND_CHIPEN	(PKUNITY_NAND_BASE + 0x0038)
+/*
+ * Address Reg NAND_ADDR
+ */
+#define NAND_ADDR	(PKUNITY_NAND_BASE + 0x003C)
+
+/*
+ * Command bits NAND_CMD_CMD_MASK
+ */
+#define NAND_CMD_CMD_MASK		FMASK(4, 4)
+#define NAND_CMD_CMD_READPAGE		FIELD(0x0, 4, 4)
+#define NAND_CMD_CMD_ERASEBLOCK		FIELD(0x6, 4, 4)
+#define NAND_CMD_CMD_READSTATUS		FIELD(0x7, 4, 4)
+#define NAND_CMD_CMD_WRITEPAGE		FIELD(0x8, 4, 4)
+#define NAND_CMD_CMD_READID		FIELD(0x9, 4, 4)
+#define NAND_CMD_CMD_RESET		FIELD(0xf, 4, 4)
+
diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h
new file mode 100644
index 00000000..7b91fe69
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-ost.h
@@ -0,0 +1,92 @@
+/*
+ * PKUnity Operating System Timer (OST) Registers
+ */
+/*
+ * Match Reg 0 OST_OSMR0
+ */
+#define OST_OSMR0	(PKUNITY_OST_BASE + 0x0000)
+/*
+ * Match Reg 1 OST_OSMR1
+ */
+#define OST_OSMR1	(PKUNITY_OST_BASE + 0x0004)
+/*
+ * Match Reg 2 OST_OSMR2
+ */
+#define OST_OSMR2	(PKUNITY_OST_BASE + 0x0008)
+/*
+ * Match Reg 3 OST_OSMR3
+ */
+#define OST_OSMR3	(PKUNITY_OST_BASE + 0x000C)
+/*
+ * Counter Reg OST_OSCR
+ */
+#define OST_OSCR	(PKUNITY_OST_BASE + 0x0010)
+/*
+ * Status Reg OST_OSSR
+ */
+#define OST_OSSR	(PKUNITY_OST_BASE + 0x0014)
+/*
+ * Watchdog Enable Reg OST_OWER
+ */
+#define OST_OWER	(PKUNITY_OST_BASE + 0x0018)
+/*
+ * Interrupt Enable Reg OST_OIER
+ */
+#define OST_OIER	(PKUNITY_OST_BASE + 0x001C)
+/*
+ * PWM Pulse Width Control Reg OST_PWMPWCR
+ */
+#define OST_PWMPWCR	(PKUNITY_OST_BASE + 0x0080)
+/*
+ * PWM Duty Cycle Control Reg OST_PWMDCCR
+ */
+#define OST_PWMDCCR	(PKUNITY_OST_BASE + 0x0084)
+/*
+ * PWM Period Control Reg OST_PWMPCR
+ */
+#define OST_PWMPCR	(PKUNITY_OST_BASE + 0x0088)
+
+/*
+ * Match detected 0 OST_OSSR_M0
+ */
+#define OST_OSSR_M0		FIELD(1, 1, 0)
+/*
+ * Match detected 1 OST_OSSR_M1
+ */
+#define OST_OSSR_M1		FIELD(1, 1, 1)
+/*
+ * Match detected 2 OST_OSSR_M2
+ */
+#define OST_OSSR_M2		FIELD(1, 1, 2)
+/*
+ * Match detected 3 OST_OSSR_M3
+ */
+#define OST_OSSR_M3		FIELD(1, 1, 3)
+
+/*
+ * Interrupt enable 0 OST_OIER_E0
+ */
+#define OST_OIER_E0		FIELD(1, 1, 0)
+/*
+ * Interrupt enable 1 OST_OIER_E1
+ */
+#define OST_OIER_E1		FIELD(1, 1, 1)
+/*
+ * Interrupt enable 2 OST_OIER_E2
+ */
+#define OST_OIER_E2		FIELD(1, 1, 2)
+/*
+ * Interrupt enable 3 OST_OIER_E3
+ */
+#define OST_OIER_E3		FIELD(1, 1, 3)
+
+/*
+ * Watchdog Match Enable OST_OWER_WME
+ */
+#define OST_OWER_WME		FIELD(1, 1, 0)
+
+/*
+ * PWM Full Duty Cycle OST_PWMDCCR_FDCYCLE
+ */
+#define OST_PWMDCCR_FDCYCLE	FIELD(1, 1, 10)
+
diff --git a/arch/unicore32/include/mach/regs-pci.h b/arch/unicore32/include/mach/regs-pci.h
new file mode 100644
index 00000000..6a934168
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-pci.h
@@ -0,0 +1,94 @@
+/*
+ * PKUnity AHB-PCI Bridge Registers
+ */
+
+/*
+ * AHB/PCI fixed physical address for pci addess configuration
+ */
+/*
+ * PCICFG Bridge Base Reg.
+ */
+#define PCICFG_BRIBASE          (PKUNITY_PCICFG_BASE + 0x0000)
+/*
+ * PCICFG Address Reg.
+ */
+#define PCICFG_ADDR             (PKUNITY_PCICFG_BASE + 0x0004)
+/*
+ * PCICFG Address Reg.
+ */
+#define PCICFG_DATA             (PKUNITY_PCICFG_BASE + 0x0008)
+
+/*
+ * PCI Bridge configuration space
+ */
+#define PCIBRI_ID		(PKUNITY_PCIBRI_BASE + 0x0000)
+#define PCIBRI_CMD		(PKUNITY_PCIBRI_BASE + 0x0004)
+#define PCIBRI_CLASS		(PKUNITY_PCIBRI_BASE + 0x0008)
+#define PCIBRI_LTR		(PKUNITY_PCIBRI_BASE + 0x000C)
+#define PCIBRI_BAR0		(PKUNITY_PCIBRI_BASE + 0x0010)
+#define PCIBRI_BAR1		(PKUNITY_PCIBRI_BASE + 0x0014)
+#define PCIBRI_BAR2		(PKUNITY_PCIBRI_BASE + 0x0018)
+#define PCIBRI_BAR3		(PKUNITY_PCIBRI_BASE + 0x001C)
+#define PCIBRI_BAR4		(PKUNITY_PCIBRI_BASE + 0x0020)
+#define PCIBRI_BAR5		(PKUNITY_PCIBRI_BASE + 0x0024)
+
+#define PCIBRI_PCICTL0		(PKUNITY_PCIBRI_BASE + 0x0100)
+#define PCIBRI_PCIBAR0		(PKUNITY_PCIBRI_BASE + 0x0104)
+#define PCIBRI_PCIAMR0		(PKUNITY_PCIBRI_BASE + 0x0108)
+#define PCIBRI_PCITAR0		(PKUNITY_PCIBRI_BASE + 0x010C)
+#define PCIBRI_PCICTL1		(PKUNITY_PCIBRI_BASE + 0x0110)
+#define PCIBRI_PCIBAR1		(PKUNITY_PCIBRI_BASE + 0x0114)
+#define PCIBRI_PCIAMR1		(PKUNITY_PCIBRI_BASE + 0x0118)
+#define PCIBRI_PCITAR1		(PKUNITY_PCIBRI_BASE + 0x011C)
+#define PCIBRI_PCICTL2		(PKUNITY_PCIBRI_BASE + 0x0120)
+#define PCIBRI_PCIBAR2		(PKUNITY_PCIBRI_BASE + 0x0124)
+#define PCIBRI_PCIAMR2		(PKUNITY_PCIBRI_BASE + 0x0128)
+#define PCIBRI_PCITAR2		(PKUNITY_PCIBRI_BASE + 0x012C)
+#define PCIBRI_PCICTL3		(PKUNITY_PCIBRI_BASE + 0x0130)
+#define PCIBRI_PCIBAR3		(PKUNITY_PCIBRI_BASE + 0x0134)
+#define PCIBRI_PCIAMR3		(PKUNITY_PCIBRI_BASE + 0x0138)
+#define PCIBRI_PCITAR3		(PKUNITY_PCIBRI_BASE + 0x013C)
+#define PCIBRI_PCICTL4		(PKUNITY_PCIBRI_BASE + 0x0140)
+#define PCIBRI_PCIBAR4		(PKUNITY_PCIBRI_BASE + 0x0144)
+#define PCIBRI_PCIAMR4		(PKUNITY_PCIBRI_BASE + 0x0148)
+#define PCIBRI_PCITAR4		(PKUNITY_PCIBRI_BASE + 0x014C)
+#define PCIBRI_PCICTL5		(PKUNITY_PCIBRI_BASE + 0x0150)
+#define PCIBRI_PCIBAR5		(PKUNITY_PCIBRI_BASE + 0x0154)
+#define PCIBRI_PCIAMR5		(PKUNITY_PCIBRI_BASE + 0x0158)
+#define PCIBRI_PCITAR5		(PKUNITY_PCIBRI_BASE + 0x015C)
+
+#define PCIBRI_AHBCTL0		(PKUNITY_PCIBRI_BASE + 0x0180)
+#define PCIBRI_AHBBAR0		(PKUNITY_PCIBRI_BASE + 0x0184)
+#define PCIBRI_AHBAMR0		(PKUNITY_PCIBRI_BASE + 0x0188)
+#define PCIBRI_AHBTAR0		(PKUNITY_PCIBRI_BASE + 0x018C)
+#define PCIBRI_AHBCTL1		(PKUNITY_PCIBRI_BASE + 0x0190)
+#define PCIBRI_AHBBAR1		(PKUNITY_PCIBRI_BASE + 0x0194)
+#define PCIBRI_AHBAMR1		(PKUNITY_PCIBRI_BASE + 0x0198)
+#define PCIBRI_AHBTAR1		(PKUNITY_PCIBRI_BASE + 0x019C)
+#define PCIBRI_AHBCTL2		(PKUNITY_PCIBRI_BASE + 0x01A0)
+#define PCIBRI_AHBBAR2		(PKUNITY_PCIBRI_BASE + 0x01A4)
+#define PCIBRI_AHBAMR2		(PKUNITY_PCIBRI_BASE + 0x01A8)
+#define PCIBRI_AHBTAR2		(PKUNITY_PCIBRI_BASE + 0x01AC)
+#define PCIBRI_AHBCTL3		(PKUNITY_PCIBRI_BASE + 0x01B0)
+#define PCIBRI_AHBBAR3		(PKUNITY_PCIBRI_BASE + 0x01B4)
+#define PCIBRI_AHBAMR3		(PKUNITY_PCIBRI_BASE + 0x01B8)
+#define PCIBRI_AHBTAR3		(PKUNITY_PCIBRI_BASE + 0x01BC)
+#define PCIBRI_AHBCTL4		(PKUNITY_PCIBRI_BASE + 0x01C0)
+#define PCIBRI_AHBBAR4		(PKUNITY_PCIBRI_BASE + 0x01C4)
+#define PCIBRI_AHBAMR4		(PKUNITY_PCIBRI_BASE + 0x01C8)
+#define PCIBRI_AHBTAR4		(PKUNITY_PCIBRI_BASE + 0x01CC)
+#define PCIBRI_AHBCTL5		(PKUNITY_PCIBRI_BASE + 0x01D0)
+#define PCIBRI_AHBBAR5		(PKUNITY_PCIBRI_BASE + 0x01D4)
+#define PCIBRI_AHBAMR5		(PKUNITY_PCIBRI_BASE + 0x01D8)
+#define PCIBRI_AHBTAR5		(PKUNITY_PCIBRI_BASE + 0x01DC)
+
+#define PCIBRI_CTLx_AT          FIELD(1, 1, 2)
+#define PCIBRI_CTLx_PREF        FIELD(1, 1, 1)
+#define PCIBRI_CTLx_MRL         FIELD(1, 1, 0)
+
+#define PCIBRI_BARx_ADDR        FIELD(0xFFFFFFFC, 30, 2)
+#define PCIBRI_BARx_IO          FIELD(1, 1, 0)
+#define PCIBRI_BARx_MEM         FIELD(0, 1, 0)
+
+#define PCIBRI_CMD_IO           FIELD(1, 1, 0)
+#define PCIBRI_CMD_MEM          FIELD(1, 1, 1)
diff --git a/arch/unicore32/include/mach/regs-pm.h b/arch/unicore32/include/mach/regs-pm.h
new file mode 100644
index 00000000..854844aa
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-pm.h
@@ -0,0 +1,126 @@
+/*
+ * PKUNITY Power Manager (PM) Registers
+ */
+/*
+ * PM Control Reg PM_PMCR
+ */
+#define PM_PMCR                 (PKUNITY_PM_BASE + 0x0000)
+/*
+ * PM General Conf. Reg PM_PGCR
+ */
+#define PM_PGCR                 (PKUNITY_PM_BASE + 0x0004)
+/*
+ * PM PLL Conf. Reg PM_PPCR
+ */
+#define PM_PPCR                 (PKUNITY_PM_BASE + 0x0008)
+/*
+ * PM Wakeup Enable Reg PM_PWER
+ */
+#define PM_PWER                 (PKUNITY_PM_BASE + 0x000C)
+/*
+ * PM GPIO Sleep Status Reg PM_PGSR
+ */
+#define PM_PGSR                 (PKUNITY_PM_BASE + 0x0010)
+/*
+ * PM Clock Gate Reg PM_PCGR
+ */
+#define PM_PCGR                 (PKUNITY_PM_BASE + 0x0014)
+/*
+ * PM SYS PLL Conf. Reg PM_PLLSYSCFG
+ */
+#define PM_PLLSYSCFG            (PKUNITY_PM_BASE + 0x0018)
+/*
+ * PM DDR PLL Conf. Reg PM_PLLDDRCFG
+ */
+#define PM_PLLDDRCFG            (PKUNITY_PM_BASE + 0x001C)
+/*
+ * PM VGA PLL Conf. Reg PM_PLLVGACFG
+ */
+#define PM_PLLVGACFG            (PKUNITY_PM_BASE + 0x0020)
+/*
+ * PM Div Conf. Reg PM_DIVCFG
+ */
+#define PM_DIVCFG               (PKUNITY_PM_BASE + 0x0024)
+/*
+ * PM SYS PLL Status Reg PM_PLLSYSSTATUS
+ */
+#define PM_PLLSYSSTATUS         (PKUNITY_PM_BASE + 0x0028)
+/*
+ * PM DDR PLL Status Reg PM_PLLDDRSTATUS
+ */
+#define PM_PLLDDRSTATUS         (PKUNITY_PM_BASE + 0x002C)
+/*
+ * PM VGA PLL Status Reg PM_PLLVGASTATUS
+ */
+#define PM_PLLVGASTATUS         (PKUNITY_PM_BASE + 0x0030)
+/*
+ * PM Div Status Reg PM_DIVSTATUS
+ */
+#define PM_DIVSTATUS            (PKUNITY_PM_BASE + 0x0034)
+/*
+ * PM Software Reset Reg PM_SWRESET
+ */
+#define PM_SWRESET              (PKUNITY_PM_BASE + 0x0038)
+/*
+ * PM DDR2 PAD Start Reg PM_DDR2START
+ */
+#define PM_DDR2START            (PKUNITY_PM_BASE + 0x003C)
+/*
+ * PM DDR2 PAD Status Reg PM_DDR2CAL0
+ */
+#define PM_DDR2CAL0             (PKUNITY_PM_BASE + 0x0040)
+/*
+ * PM PLL DFC Done Reg PM_PLLDFCDONE
+ */
+#define PM_PLLDFCDONE           (PKUNITY_PM_BASE + 0x0044)
+
+#define PM_PMCR_SFB             FIELD(1, 1, 0)
+#define PM_PMCR_IFB             FIELD(1, 1, 1)
+#define PM_PMCR_CFBSYS          FIELD(1, 1, 2)
+#define PM_PMCR_CFBDDR          FIELD(1, 1, 3)
+#define PM_PMCR_CFBVGA          FIELD(1, 1, 4)
+#define PM_PMCR_CFBDIVBCLK      FIELD(1, 1, 5)
+
+/*
+ * GPIO 8~27 wake-up enable PM_PWER_GPIOHIGH
+ */
+#define PM_PWER_GPIOHIGH        FIELD(1, 1, 8)
+/*
+ * RTC alarm wake-up enable PM_PWER_RTC
+ */
+#define PM_PWER_RTC             FIELD(1, 1, 31)
+
+#define PM_PCGR_BCLK64DDR	FIELD(1, 1, 0)
+#define PM_PCGR_BCLK64VGA	FIELD(1, 1, 1)
+#define PM_PCGR_BCLKDDR		FIELD(1, 1, 2)
+#define PM_PCGR_BCLKPCI		FIELD(1, 1, 4)
+#define PM_PCGR_BCLKDMAC	FIELD(1, 1, 5)
+#define PM_PCGR_BCLKUMAL	FIELD(1, 1, 6)
+#define PM_PCGR_BCLKUSB		FIELD(1, 1, 7)
+#define PM_PCGR_BCLKMME		FIELD(1, 1, 10)
+#define PM_PCGR_BCLKNAND	FIELD(1, 1, 11)
+#define PM_PCGR_BCLKH264E	FIELD(1, 1, 12)
+#define PM_PCGR_BCLKVGA		FIELD(1, 1, 13)
+#define PM_PCGR_BCLKH264D	FIELD(1, 1, 14)
+#define PM_PCGR_VECLK		FIELD(1, 1, 15)
+#define PM_PCGR_HECLK		FIELD(1, 1, 16)
+#define PM_PCGR_HDCLK		FIELD(1, 1, 17)
+#define PM_PCGR_NANDCLK		FIELD(1, 1, 18)
+#define PM_PCGR_GECLK		FIELD(1, 1, 19)
+#define PM_PCGR_VGACLK          FIELD(1, 1, 20)
+#define PM_PCGR_PCICLK		FIELD(1, 1, 21)
+#define PM_PCGR_SATACLK		FIELD(1, 1, 25)
+
+/*
+ * [23:20]PM_DIVCFG_VGACLK(v)
+ */
+#define PM_DIVCFG_VGACLK_MASK   FMASK(4, 20)
+#define PM_DIVCFG_VGACLK(v)	FIELD((v), 4, 20)
+
+#define PM_SWRESET_USB          FIELD(1, 1, 6)
+#define PM_SWRESET_VGADIV       FIELD(1, 1, 26)
+#define PM_SWRESET_GEDIV        FIELD(1, 1, 27)
+
+#define PM_PLLDFCDONE_SYSDFC    FIELD(1, 1, 0)
+#define PM_PLLDFCDONE_DDRDFC    FIELD(1, 1, 1)
+#define PM_PLLDFCDONE_VGADFC    FIELD(1, 1, 2)
diff --git a/arch/unicore32/include/mach/regs-ps2.h b/arch/unicore32/include/mach/regs-ps2.h
new file mode 100644
index 00000000..17d4e6dc
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-ps2.h
@@ -0,0 +1,20 @@
+/*
+ * PKUnity PS2 Controller Registers
+ */
+/*
+ * the same as I8042_DATA_REG PS2_DATA
+ */
+#define PS2_DATA	(PKUNITY_PS2_BASE + 0x0060)
+/*
+ * the same as I8042_COMMAND_REG PS2_COMMAND
+ */
+#define PS2_COMMAND	(PKUNITY_PS2_BASE + 0x0064)
+/*
+ * the same as I8042_STATUS_REG PS2_STATUS
+ */
+#define PS2_STATUS	(PKUNITY_PS2_BASE + 0x0064)
+/*
+ * counter reg PS2_CNT
+ */
+#define PS2_CNT		(PKUNITY_PS2_BASE + 0x0068)
+
diff --git a/arch/unicore32/include/mach/regs-resetc.h b/arch/unicore32/include/mach/regs-resetc.h
new file mode 100644
index 00000000..39900cf4
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-resetc.h
@@ -0,0 +1,34 @@
+/*
+ * PKUnity Reset Controller (RC) Registers
+ */
+/*
+ * Software Reset Register
+ */
+#define RESETC_SWRR	(PKUNITY_RESETC_BASE + 0x0000)
+/*
+ * Reset Status Register
+ */
+#define RESETC_RSSR	(PKUNITY_RESETC_BASE + 0x0004)
+
+/*
+ * Software Reset Bit
+ */
+#define RESETC_SWRR_SRB		FIELD(1, 1, 0)
+
+/*
+ * Hardware Reset
+ */
+#define RESETC_RSSR_HWR		FIELD(1, 1, 0)
+/*
+ * Software Reset
+ */
+#define RESETC_RSSR_SWR		FIELD(1, 1, 1)
+/*
+ * Watchdog Reset
+ */
+#define RESETC_RSSR_WDR		FIELD(1, 1, 2)
+/*
+ * Sleep Mode Reset
+ */
+#define RESETC_RSSR_SMR		FIELD(1, 1, 3)
+
diff --git a/arch/unicore32/include/mach/regs-rtc.h b/arch/unicore32/include/mach/regs-rtc.h
new file mode 100644
index 00000000..e94ca193
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-rtc.h
@@ -0,0 +1,37 @@
+/*
+ * PKUnity Real-Time Clock (RTC) control registers
+ */
+/*
+ * RTC Alarm Reg RTC_RTAR
+ */
+#define RTC_RTAR	(PKUNITY_RTC_BASE + 0x0000)
+/*
+ * RTC Count Reg RTC_RCNR
+ */
+#define RTC_RCNR	(PKUNITY_RTC_BASE + 0x0004)
+/*
+ * RTC Trim Reg RTC_RTTR
+ */
+#define RTC_RTTR	(PKUNITY_RTC_BASE + 0x0008)
+/*
+ * RTC Status Reg RTC_RTSR
+ */
+#define RTC_RTSR	(PKUNITY_RTC_BASE + 0x0010)
+
+/*
+ * ALarm detected RTC_RTSR_AL
+ */
+#define RTC_RTSR_AL		FIELD(1, 1, 0)
+/*
+ * 1 Hz clock detected RTC_RTSR_HZ
+ */
+#define RTC_RTSR_HZ		FIELD(1, 1, 1)
+/*
+ * ALarm interrupt Enable RTC_RTSR_ALE
+ */
+#define RTC_RTSR_ALE		FIELD(1, 1, 2)
+/*
+ * 1 Hz clock interrupt Enable RTC_RTSR_HZE
+ */
+#define RTC_RTSR_HZE		FIELD(1, 1, 3)
+
diff --git a/arch/unicore32/include/mach/regs-sdc.h b/arch/unicore32/include/mach/regs-sdc.h
new file mode 100644
index 00000000..1303ecf6
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-sdc.h
@@ -0,0 +1,156 @@
+/*
+ * PKUnity Multi-Media Card and Security Digital Card (MMC/SD) Registers
+ */
+/*
+ * Clock Control Reg SDC_CCR
+ */
+#define SDC_CCR		(PKUNITY_SDC_BASE + 0x0000)
+/*
+ * Software Reset Reg SDC_SRR
+ */
+#define SDC_SRR		(PKUNITY_SDC_BASE + 0x0004)
+/*
+ * Argument Reg SDC_ARGUMENT
+ */
+#define SDC_ARGUMENT	(PKUNITY_SDC_BASE + 0x0008)
+/*
+ * Command Reg SDC_COMMAND
+ */
+#define SDC_COMMAND	(PKUNITY_SDC_BASE + 0x000C)
+/*
+ * Block Size Reg SDC_BLOCKSIZE
+ */
+#define SDC_BLOCKSIZE	(PKUNITY_SDC_BASE + 0x0010)
+/*
+ * Block Cound Reg SDC_BLOCKCOUNT
+ */
+#define SDC_BLOCKCOUNT	(PKUNITY_SDC_BASE + 0x0014)
+/*
+ * Transfer Mode Reg SDC_TMR
+ */
+#define SDC_TMR		(PKUNITY_SDC_BASE + 0x0018)
+/*
+ * Response Reg. 0 SDC_RES0
+ */
+#define SDC_RES0	(PKUNITY_SDC_BASE + 0x001C)
+/*
+ * Response Reg. 1 SDC_RES1
+ */
+#define SDC_RES1	(PKUNITY_SDC_BASE + 0x0020)
+/*
+ * Response Reg. 2 SDC_RES2
+ */
+#define SDC_RES2	(PKUNITY_SDC_BASE + 0x0024)
+/*
+ * Response Reg. 3 SDC_RES3
+ */
+#define SDC_RES3	(PKUNITY_SDC_BASE + 0x0028)
+/*
+ * Read Timeout Control Reg SDC_RTCR
+ */
+#define SDC_RTCR	(PKUNITY_SDC_BASE + 0x002C)
+/*
+ * Interrupt Status Reg SDC_ISR
+ */
+#define SDC_ISR		(PKUNITY_SDC_BASE + 0x0030)
+/*
+ * Interrupt Status Mask Reg SDC_ISMR
+ */
+#define SDC_ISMR	(PKUNITY_SDC_BASE + 0x0034)
+/*
+ * RX FIFO SDC_RXFIFO
+ */
+#define SDC_RXFIFO	(PKUNITY_SDC_BASE + 0x0038)
+/*
+ * TX FIFO SDC_TXFIFO
+ */
+#define SDC_TXFIFO	(PKUNITY_SDC_BASE + 0x003C)
+
+/*
+ * SD Clock Enable SDC_CCR_CLKEN
+ */
+#define SDC_CCR_CLKEN			FIELD(1, 1, 2)
+/*
+ * [15:8] SDC_CCR_PDIV(v)
+ */
+#define SDC_CCR_PDIV(v)			FIELD((v), 8, 8)
+
+/*
+ * Software reset enable SDC_SRR_ENABLE
+ */
+#define SDC_SRR_ENABLE			FIELD(0, 1, 0)
+/*
+ * Software reset disable SDC_SRR_DISABLE
+ */
+#define SDC_SRR_DISABLE			FIELD(1, 1, 0)
+
+/*
+ * Response type SDC_COMMAND_RESTYPE_MASK
+ */
+#define SDC_COMMAND_RESTYPE_MASK	FMASK(2, 0)
+/*
+ * No response SDC_COMMAND_RESTYPE_NONE
+ */
+#define SDC_COMMAND_RESTYPE_NONE	FIELD(0, 2, 0)
+/*
+ * 136-bit long response SDC_COMMAND_RESTYPE_LONG
+ */
+#define SDC_COMMAND_RESTYPE_LONG	FIELD(1, 2, 0)
+/*
+ * 48-bit short response SDC_COMMAND_RESTYPE_SHORT
+ */
+#define SDC_COMMAND_RESTYPE_SHORT	FIELD(2, 2, 0)
+/*
+ * 48-bit short and test if busy response SDC_COMMAND_RESTYPE_SHORTBUSY
+ */
+#define SDC_COMMAND_RESTYPE_SHORTBUSY	FIELD(3, 2, 0)
+/*
+ * data ready SDC_COMMAND_DATAREADY
+ */
+#define SDC_COMMAND_DATAREADY		FIELD(1, 1, 2)
+#define SDC_COMMAND_CMDEN		FIELD(1, 1, 3)
+/*
+ * [10:5] SDC_COMMAND_CMDINDEX(v)
+ */
+#define SDC_COMMAND_CMDINDEX(v)		FIELD((v), 6, 5)
+
+/*
+ * [10:0] SDC_BLOCKSIZE_BSMASK(v)
+ */
+#define SDC_BLOCKSIZE_BSMASK(v)		FIELD((v), 11, 0)
+/*
+ * [11:0] SDC_BLOCKCOUNT_BCMASK(v)
+ */
+#define SDC_BLOCKCOUNT_BCMASK(v)	FIELD((v), 12, 0)
+
+/*
+ * Data Width 1bit SDC_TMR_WTH_1BIT
+ */
+#define SDC_TMR_WTH_1BIT		FIELD(0, 1, 0)
+/*
+ * Data Width 4bit SDC_TMR_WTH_4BIT
+ */
+#define SDC_TMR_WTH_4BIT		FIELD(1, 1, 0)
+/*
+ * Read SDC_TMR_DIR_READ
+ */
+#define SDC_TMR_DIR_READ		FIELD(0, 1, 1)
+/*
+ * Write SDC_TMR_DIR_WRITE
+ */
+#define SDC_TMR_DIR_WRITE		FIELD(1, 1, 1)
+
+#define SDC_IR_MASK			FMASK(13, 0)
+#define SDC_IR_RESTIMEOUT		FIELD(1, 1, 0)
+#define SDC_IR_WRITECRC			FIELD(1, 1, 1)
+#define SDC_IR_READCRC			FIELD(1, 1, 2)
+#define SDC_IR_TXFIFOREAD		FIELD(1, 1, 3)
+#define SDC_IR_RXFIFOWRITE		FIELD(1, 1, 4)
+#define SDC_IR_READTIMEOUT		FIELD(1, 1, 5)
+#define SDC_IR_DATACOMPLETE		FIELD(1, 1, 6)
+#define SDC_IR_CMDCOMPLETE		FIELD(1, 1, 7)
+#define SDC_IR_RXFIFOFULL		FIELD(1, 1, 8)
+#define SDC_IR_RXFIFOEMPTY		FIELD(1, 1, 9)
+#define SDC_IR_TXFIFOFULL		FIELD(1, 1, 10)
+#define SDC_IR_TXFIFOEMPTY		FIELD(1, 1, 11)
+#define SDC_IR_ENDCMDWITHRES		FIELD(1, 1, 12)
diff --git a/arch/unicore32/include/mach/regs-spi.h b/arch/unicore32/include/mach/regs-spi.h
new file mode 100644
index 00000000..de16895e
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-spi.h
@@ -0,0 +1,98 @@
+/*
+ * PKUnity Serial Peripheral Interface (SPI) Registers
+ */
+/*
+ * Control reg. 0 SPI_CR0
+ */
+#define SPI_CR0		(PKUNITY_SPI_BASE + 0x0000)
+/*
+ * Control reg. 1 SPI_CR1
+ */
+#define SPI_CR1		(PKUNITY_SPI_BASE + 0x0004)
+/*
+ * Enable reg SPI_SSIENR
+ */
+#define SPI_SSIENR	(PKUNITY_SPI_BASE + 0x0008)
+/*
+ * Status reg SPI_SR
+ */
+#define SPI_SR		(PKUNITY_SPI_BASE + 0x0028)
+/*
+ * Interrupt Mask reg SPI_IMR
+ */
+#define SPI_IMR		(PKUNITY_SPI_BASE + 0x002C)
+/*
+ * Interrupt Status reg SPI_ISR
+ */
+#define SPI_ISR		(PKUNITY_SPI_BASE + 0x0030)
+
+/*
+ * Enable SPI Controller SPI_SSIENR_EN
+ */
+#define SPI_SSIENR_EN		FIELD(1, 1, 0)
+
+/*
+ * SPI Busy SPI_SR_BUSY
+ */
+#define SPI_SR_BUSY		FIELD(1, 1, 0)
+/*
+ * Transmit FIFO Not Full SPI_SR_TFNF
+ */
+#define SPI_SR_TFNF		FIELD(1, 1, 1)
+/*
+ * Transmit FIFO Empty SPI_SR_TFE
+ */
+#define SPI_SR_TFE		FIELD(1, 1, 2)
+/*
+ * Receive FIFO Not Empty SPI_SR_RFNE
+ */
+#define SPI_SR_RFNE		FIELD(1, 1, 3)
+/*
+ * Receive FIFO Full SPI_SR_RFF
+ */
+#define SPI_SR_RFF		FIELD(1, 1, 4)
+
+/*
+ * Trans. FIFO Empty Interrupt Status SPI_ISR_TXEIS
+ */
+#define SPI_ISR_TXEIS		FIELD(1, 1, 0)
+/*
+ * Trans. FIFO Overflow Interrupt Status SPI_ISR_TXOIS
+ */
+#define SPI_ISR_TXOIS		FIELD(1, 1, 1)
+/*
+ * Receiv. FIFO Underflow Interrupt Status SPI_ISR_RXUIS
+ */
+#define SPI_ISR_RXUIS		FIELD(1, 1, 2)
+/*
+ * Receiv. FIFO Overflow Interrupt Status SPI_ISR_RXOIS
+ */
+#define SPI_ISR_RXOIS		FIELD(1, 1, 3)
+/*
+ * Receiv. FIFO Full Interrupt Status SPI_ISR_RXFIS
+ */
+#define SPI_ISR_RXFIS		FIELD(1, 1, 4)
+#define SPI_ISR_MSTIS		FIELD(1, 1, 5)
+
+/*
+ * Trans. FIFO Empty Interrupt Mask SPI_IMR_TXEIM
+ */
+#define SPI_IMR_TXEIM		FIELD(1, 1, 0)
+/*
+ * Trans. FIFO Overflow Interrupt Mask SPI_IMR_TXOIM
+ */
+#define SPI_IMR_TXOIM		FIELD(1, 1, 1)
+/*
+ * Receiv. FIFO Underflow Interrupt Mask SPI_IMR_RXUIM
+ */
+#define SPI_IMR_RXUIM		FIELD(1, 1, 2)
+/*
+ * Receiv. FIFO Overflow Interrupt Mask SPI_IMR_RXOIM
+ */
+#define SPI_IMR_RXOIM		FIELD(1, 1, 3)
+/*
+ * Receiv. FIFO Full Interrupt Mask SPI_IMR_RXFIM
+ */
+#define SPI_IMR_RXFIM		FIELD(1, 1, 4)
+#define SPI_IMR_MSTIM		FIELD(1, 1, 5)
+
diff --git a/arch/unicore32/include/mach/regs-uart.h b/arch/unicore32/include/mach/regs-uart.h
new file mode 100644
index 00000000..9fa6b193
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-uart.h
@@ -0,0 +1,3 @@
+/*
+ * PKUnity Universal Asynchronous Receiver/Transmitter (UART) Registers
+ */
diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h
new file mode 100644
index 00000000..aa22df74
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-umal.h
@@ -0,0 +1,229 @@
+/*
+ * PKUnity Ultra Media Access Layer (UMAL) Ethernet MAC Registers
+ */
+
+/* MAC module of UMAL */
+/* UMAL's MAC module includes G/MII interface, several additional PHY
+ * interfaces, and MAC control sub-layer, which provides support for control
+ * frames (e.g. PAUSE frames).
+ */
+/*
+ * TX/RX reset and control UMAL_CFG1
+ */
+#define UMAL_CFG1		(PKUNITY_UMAL_BASE + 0x0000)
+/*
+ * MAC interface mode control UMAL_CFG2
+ */
+#define UMAL_CFG2		(PKUNITY_UMAL_BASE + 0x0004)
+/*
+ * Inter Packet/Frame Gap UMAL_IPGIFG
+ */
+#define UMAL_IPGIFG		(PKUNITY_UMAL_BASE + 0x0008)
+/*
+ * Collision retry or backoff UMAL_HALFDUPLEX
+ */
+#define UMAL_HALFDUPLEX		(PKUNITY_UMAL_BASE + 0x000c)
+/*
+ * Maximum Frame Length UMAL_MAXFRAME
+ */
+#define UMAL_MAXFRAME		(PKUNITY_UMAL_BASE + 0x0010)
+/*
+ * Test Regsiter UMAL_TESTREG
+ */
+#define UMAL_TESTREG		(PKUNITY_UMAL_BASE + 0x001c)
+/*
+ * MII Management Configure UMAL_MIICFG
+ */
+#define UMAL_MIICFG		(PKUNITY_UMAL_BASE + 0x0020)
+/*
+ * MII Management Command UMAL_MIICMD
+ */
+#define UMAL_MIICMD		(PKUNITY_UMAL_BASE + 0x0024)
+/*
+ * MII Management Address UMAL_MIIADDR
+ */
+#define UMAL_MIIADDR		(PKUNITY_UMAL_BASE + 0x0028)
+/*
+ * MII Management Control UMAL_MIICTRL
+ */
+#define UMAL_MIICTRL		(PKUNITY_UMAL_BASE + 0x002c)
+/*
+ * MII Management Status UMAL_MIISTATUS
+ */
+#define UMAL_MIISTATUS		(PKUNITY_UMAL_BASE + 0x0030)
+/*
+ * MII Management Indicator UMAL_MIIIDCT
+ */
+#define UMAL_MIIIDCT		(PKUNITY_UMAL_BASE + 0x0034)
+/*
+ * Interface Control UMAL_IFCTRL
+ */
+#define UMAL_IFCTRL		(PKUNITY_UMAL_BASE + 0x0038)
+/*
+ * Interface Status UMAL_IFSTATUS
+ */
+#define UMAL_IFSTATUS		(PKUNITY_UMAL_BASE + 0x003c)
+/*
+ * MAC address (high 4 bytes) UMAL_STADDR1
+ */
+#define UMAL_STADDR1		(PKUNITY_UMAL_BASE + 0x0040)
+/*
+ * MAC address (low 2 bytes) UMAL_STADDR2
+ */
+#define UMAL_STADDR2		(PKUNITY_UMAL_BASE + 0x0044)
+
+/* FIFO MODULE OF UMAL */
+/* UMAL's FIFO module provides data queuing for increased system level
+ * throughput
+ */
+#define UMAL_FIFOCFG0		(PKUNITY_UMAL_BASE + 0x0048)
+#define UMAL_FIFOCFG1		(PKUNITY_UMAL_BASE + 0x004c)
+#define UMAL_FIFOCFG2		(PKUNITY_UMAL_BASE + 0x0050)
+#define UMAL_FIFOCFG3		(PKUNITY_UMAL_BASE + 0x0054)
+#define UMAL_FIFOCFG4		(PKUNITY_UMAL_BASE + 0x0058)
+#define UMAL_FIFOCFG5		(PKUNITY_UMAL_BASE + 0x005c)
+#define UMAL_FIFORAM0		(PKUNITY_UMAL_BASE + 0x0060)
+#define UMAL_FIFORAM1		(PKUNITY_UMAL_BASE + 0x0064)
+#define UMAL_FIFORAM2		(PKUNITY_UMAL_BASE + 0x0068)
+#define UMAL_FIFORAM3		(PKUNITY_UMAL_BASE + 0x006c)
+#define UMAL_FIFORAM4		(PKUNITY_UMAL_BASE + 0x0070)
+#define UMAL_FIFORAM5		(PKUNITY_UMAL_BASE + 0x0074)
+#define UMAL_FIFORAM6		(PKUNITY_UMAL_BASE + 0x0078)
+#define UMAL_FIFORAM7		(PKUNITY_UMAL_BASE + 0x007c)
+
+/* MAHBE MODULE OF UMAL */
+/* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master
+ * and Slave ports.Registers within the M-AHBE provide Control and Status
+ * information concerning these transfers.
+ */
+/*
+ * Transmit Control UMAL_DMATxCtrl
+ */
+#define UMAL_DMATxCtrl		(PKUNITY_UMAL_BASE + 0x0180)
+/*
+ * Pointer to TX Descripter UMAL_DMATxDescriptor
+ */
+#define UMAL_DMATxDescriptor	(PKUNITY_UMAL_BASE + 0x0184)
+/*
+ * Status of Tx Packet Transfers UMAL_DMATxStatus
+ */
+#define UMAL_DMATxStatus	(PKUNITY_UMAL_BASE + 0x0188)
+/*
+ * Receive Control UMAL_DMARxCtrl
+ */
+#define UMAL_DMARxCtrl		(PKUNITY_UMAL_BASE + 0x018c)
+/*
+ * Pointer to Rx Descriptor UMAL_DMARxDescriptor
+ */
+#define UMAL_DMARxDescriptor	(PKUNITY_UMAL_BASE + 0x0190)
+/*
+ * Status of Rx Packet Transfers UMAL_DMARxStatus
+ */
+#define UMAL_DMARxStatus	(PKUNITY_UMAL_BASE + 0x0194)
+/*
+ * Interrupt Mask UMAL_DMAIntrMask
+ */
+#define UMAL_DMAIntrMask	(PKUNITY_UMAL_BASE + 0x0198)
+/*
+ * Interrupts, read only UMAL_DMAInterrupt
+ */
+#define UMAL_DMAInterrupt	(PKUNITY_UMAL_BASE + 0x019c)
+
+/*
+ * Commands for UMAL_CFG1 register
+ */
+#define UMAL_CFG1_TXENABLE	FIELD(1, 1, 0)
+#define UMAL_CFG1_RXENABLE	FIELD(1, 1, 2)
+#define UMAL_CFG1_TXFLOWCTL	FIELD(1, 1, 4)
+#define UMAL_CFG1_RXFLOWCTL	FIELD(1, 1, 5)
+#define UMAL_CFG1_CONFLPBK	FIELD(1, 1, 8)
+#define UMAL_CFG1_RESET		FIELD(1, 1, 31)
+#define UMAL_CFG1_CONFFLCTL	(MAC_TX_FLOW_CTL | MAC_RX_FLOW_CTL)
+
+/*
+ * Commands for UMAL_CFG2 register
+ */
+#define UMAL_CFG2_FULLDUPLEX	FIELD(1, 1, 0)
+#define UMAL_CFG2_CRCENABLE	FIELD(1, 1, 1)
+#define UMAL_CFG2_PADCRC	FIELD(1, 1, 2)
+#define UMAL_CFG2_LENGTHCHECK	FIELD(1, 1, 4)
+#define UMAL_CFG2_MODEMASK	FMASK(2, 8)
+#define UMAL_CFG2_NIBBLEMODE	FIELD(1, 2, 8)
+#define UMAL_CFG2_BYTEMODE	FIELD(2, 2, 8)
+#define UMAL_CFG2_PREAMBLENMASK	FMASK(4, 12)
+#define UMAL_CFG2_DEFPREAMBLEN	FIELD(7, 4, 12)
+#define UMAL_CFG2_FD100		(UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
+				| UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
+				| UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
+#define UMAL_CFG2_FD1000	(UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_BYTEMODE \
+				| UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
+				| UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
+#define UMAL_CFG2_HD100		(UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
+				| UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
+				| UMAL_CFG2_CRCENABLE)
+
+/*
+ * Command for UMAL_IFCTRL register
+ */
+#define UMAL_IFCTRL_RESET	FIELD(1, 1, 31)
+
+/*
+ * Command for UMAL_MIICFG register
+ */
+#define UMAL_MIICFG_RESET	FIELD(1, 1, 31)
+
+/*
+ * Command for UMAL_MIICMD register
+ */
+#define UMAL_MIICMD_READ	FIELD(1, 1, 0)
+
+/*
+ * Command for UMAL_MIIIDCT register
+ */
+#define UMAL_MIIIDCT_BUSY	FIELD(1, 1, 0)
+#define UMAL_MIIIDCT_NOTVALID	FIELD(1, 1, 2)
+
+/*
+ * Commands for DMATxCtrl regesters
+ */
+#define UMAL_DMA_Enable		FIELD(1, 1, 0)
+
+/*
+ * Commands for DMARxCtrl regesters
+ */
+#define UMAL_DMAIntrMask_ENABLEHALFWORD	FIELD(1, 1, 16)
+
+/*
+ * Command for DMARxStatus
+ */
+#define CLR_RX_BUS_ERR		FIELD(1, 1, 3)
+#define CLR_RX_OVERFLOW		FIELD(1, 1, 2)
+#define CLR_RX_PKT		FIELD(1, 1, 0)
+
+/*
+ * Command for DMATxStatus
+ */
+#define CLR_TX_BUS_ERR		FIELD(1, 1, 3)
+#define CLR_TX_UNDERRUN		FIELD(1, 1, 1)
+#define CLR_TX_PKT		FIELD(1, 1, 0)
+
+/*
+ * Commands for DMAIntrMask and DMAInterrupt register
+ */
+#define INT_RX_MASK		FIELD(0xd, 4, 4)
+#define INT_TX_MASK		FIELD(0xb, 4, 0)
+
+#define INT_RX_BUS_ERR		FIELD(1, 1, 7)
+#define INT_RX_OVERFLOW		FIELD(1, 1, 6)
+#define INT_RX_PKT		FIELD(1, 1, 4)
+#define INT_TX_BUS_ERR		FIELD(1, 1, 3)
+#define INT_TX_UNDERRUN		FIELD(1, 1, 1)
+#define INT_TX_PKT		FIELD(1, 1, 0)
+
+/*
+ * MARCOS of UMAL's descriptors
+ */
+#define UMAL_DESC_PACKETSIZE_EMPTY	FIELD(1, 1, 31)
+#define UMAL_DESC_PACKETSIZE_NONEMPTY	FIELD(0, 1, 31)
+#define UMAL_DESC_PACKETSIZE_SIZEMASK	FMASK(12, 0)
+
diff --git a/arch/unicore32/include/mach/regs-unigfx.h b/arch/unicore32/include/mach/regs-unigfx.h
new file mode 100644
index 00000000..faf8b287
--- /dev/null
+++ b/arch/unicore32/include/mach/regs-unigfx.h
@@ -0,0 +1,200 @@
+/*
+ * PKUnity UNIGFX Registers
+ */
+
+#define UDE_BASE      (PKUNITY_UNIGFX_BASE + 0x1400)
+#define UGE_BASE      (PKUNITY_UNIGFX_BASE + 0x0000)
+
+/*
+ * command reg for UNIGFX DE
+ */
+/*
+ * control reg UDE_CFG
+ */
+#define UDE_CFG       (UDE_BASE + 0x0000)
+/*
+ * framebuffer start address reg UDE_FSA
+ */
+#define UDE_FSA       (UDE_BASE + 0x0004)
+/*
+ * line size reg UDE_LS
+ */
+#define UDE_LS        (UDE_BASE + 0x0008)
+/*
+ * pitch size reg UDE_PS
+ */
+#define UDE_PS        (UDE_BASE + 0x000C)
+/*
+ * horizontal active time reg UDE_HAT
+ */
+#define UDE_HAT       (UDE_BASE + 0x0010)
+/*
+ * horizontal blank time reg UDE_HBT
+ */
+#define UDE_HBT       (UDE_BASE + 0x0014)
+/*
+ * horizontal sync time reg UDE_HST
+ */
+#define UDE_HST       (UDE_BASE + 0x0018)
+/*
+ * vertival active time reg UDE_VAT
+ */
+#define UDE_VAT       (UDE_BASE + 0x001C)
+/*
+ * vertival blank time reg UDE_VBT
+ */
+#define UDE_VBT       (UDE_BASE + 0x0020)
+/*
+ * vertival sync time reg UDE_VST
+ */
+#define UDE_VST       (UDE_BASE + 0x0024)
+/*
+ * cursor position UDE_CXY
+ */
+#define UDE_CXY       (UDE_BASE + 0x0028)
+/*
+ * cursor front color UDE_CC0
+ */
+#define UDE_CC0       (UDE_BASE + 0x002C)
+/*
+ * cursor background color UDE_CC1
+ */
+#define UDE_CC1       (UDE_BASE + 0x0030)
+/*
+ * video position UDE_VXY
+ */
+#define UDE_VXY       (UDE_BASE + 0x0034)
+/*
+ * video start address reg UDE_VSA
+ */
+#define UDE_VSA       (UDE_BASE + 0x0040)
+/*
+ * video size reg UDE_VS
+ */
+#define UDE_VS        (UDE_BASE + 0x004C)
+
+/*
+ * command reg for UNIGFX GE
+ */
+/*
+ * src xy reg UGE_SRCXY
+ */
+#define UGE_SRCXY     (UGE_BASE + 0x0000)
+/*
+ * dst xy reg UGE_DSTXY
+ */
+#define UGE_DSTXY     (UGE_BASE + 0x0004)
+/*
+ * pitch reg UGE_PITCH
+ */
+#define UGE_PITCH     (UGE_BASE + 0x0008)
+/*
+ * src start reg UGE_SRCSTART
+ */
+#define UGE_SRCSTART  (UGE_BASE + 0x000C)
+/*
+ * dst start reg UGE_DSTSTART
+ */
+#define UGE_DSTSTART  (UGE_BASE + 0x0010)
+/*
+ * width height reg UGE_WIDHEIGHT
+ */
+#define UGE_WIDHEIGHT (UGE_BASE + 0x0014)
+/*
+ * rop alpah reg UGE_ROPALPHA
+ */
+#define UGE_ROPALPHA  (UGE_BASE + 0x0018)
+/*
+ * front color UGE_FCOLOR
+ */
+#define UGE_FCOLOR    (UGE_BASE + 0x001C)
+/*
+ * background color UGE_BCOLOR
+ */
+#define UGE_BCOLOR    (UGE_BASE + 0x0020)
+/*
+ * src color key for high value UGE_SCH
+ */
+#define UGE_SCH       (UGE_BASE + 0x0024)
+/*
+ * dst color key for high value UGE_DCH
+ */
+#define UGE_DCH       (UGE_BASE + 0x0028)
+/*
+ * src color key for low value UGE_SCL
+ */
+#define UGE_SCL       (UGE_BASE + 0x002C)
+/*
+ * dst color key for low value UGE_DCL
+ */
+#define UGE_DCL       (UGE_BASE + 0x0030)
+/*
+ * clip 0 reg UGE_CLIP0
+ */
+#define UGE_CLIP0     (UGE_BASE + 0x0034)
+/*
+ * clip 1 reg UGE_CLIP1
+ */
+#define UGE_CLIP1     (UGE_BASE + 0x0038)
+/*
+ * command reg UGE_COMMAND
+ */
+#define UGE_COMMAND   (UGE_BASE + 0x003C)
+/*
+ * pattern 0 UGE_P0
+ */
+#define UGE_P0        (UGE_BASE + 0x0040)
+#define UGE_P1        (UGE_BASE + 0x0044)
+#define UGE_P2        (UGE_BASE + 0x0048)
+#define UGE_P3        (UGE_BASE + 0x004C)
+#define UGE_P4        (UGE_BASE + 0x0050)
+#define UGE_P5        (UGE_BASE + 0x0054)
+#define UGE_P6        (UGE_BASE + 0x0058)
+#define UGE_P7        (UGE_BASE + 0x005C)
+#define UGE_P8        (UGE_BASE + 0x0060)
+#define UGE_P9        (UGE_BASE + 0x0064)
+#define UGE_P10       (UGE_BASE + 0x0068)
+#define UGE_P11       (UGE_BASE + 0x006C)
+#define UGE_P12       (UGE_BASE + 0x0070)
+#define UGE_P13       (UGE_BASE + 0x0074)
+#define UGE_P14       (UGE_BASE + 0x0078)
+#define UGE_P15       (UGE_BASE + 0x007C)
+#define UGE_P16       (UGE_BASE + 0x0080)
+#define UGE_P17       (UGE_BASE + 0x0084)
+#define UGE_P18       (UGE_BASE + 0x0088)
+#define UGE_P19       (UGE_BASE + 0x008C)
+#define UGE_P20       (UGE_BASE + 0x0090)
+#define UGE_P21       (UGE_BASE + 0x0094)
+#define UGE_P22       (UGE_BASE + 0x0098)
+#define UGE_P23       (UGE_BASE + 0x009C)
+#define UGE_P24       (UGE_BASE + 0x00A0)
+#define UGE_P25       (UGE_BASE + 0x00A4)
+#define UGE_P26       (UGE_BASE + 0x00A8)
+#define UGE_P27       (UGE_BASE + 0x00AC)
+#define UGE_P28       (UGE_BASE + 0x00B0)
+#define UGE_P29       (UGE_BASE + 0x00B4)
+#define UGE_P30       (UGE_BASE + 0x00B8)
+#define UGE_P31       (UGE_BASE + 0x00BC)
+
+#define UDE_CFG_DST_MASK	FMASK(2, 8)
+#define UDE_CFG_DST8            FIELD(0x0, 2, 8)
+#define UDE_CFG_DST16           FIELD(0x1, 2, 8)
+#define UDE_CFG_DST24           FIELD(0x2, 2, 8)
+#define UDE_CFG_DST32           FIELD(0x3, 2, 8)
+
+/*
+ * GDEN enable UDE_CFG_GDEN_ENABLE
+ */
+#define UDE_CFG_GDEN_ENABLE     FIELD(1, 1, 3)
+/*
+ * VDEN enable UDE_CFG_VDEN_ENABLE
+ */
+#define UDE_CFG_VDEN_ENABLE     FIELD(1, 1, 4)
+/*
+ * CDEN enable UDE_CFG_CDEN_ENABLE
+ */
+#define UDE_CFG_CDEN_ENABLE     FIELD(1, 1, 5)
+/*
+ * TIMEUP enable UDE_CFG_TIMEUP_ENABLE
+ */
+#define UDE_CFG_TIMEUP_ENABLE   FIELD(1, 1, 6)
diff --git a/arch/unicore32/include/mach/uncompress.h b/arch/unicore32/include/mach/uncompress.h
new file mode 100644
index 00000000..142d3e79
--- /dev/null
+++ b/arch/unicore32/include/mach/uncompress.h
@@ -0,0 +1,34 @@
+/*
+ * linux/arch/unicore32/include/mach/uncompress.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_PUV3_UNCOMPRESS_H__
+#define __MACH_PUV3_UNCOMPRESS_H__
+
+#include "hardware.h"
+#include "ocd.h"
+
+extern char input_data[];
+extern char input_data_end[];
+
+static void arch_decomp_puts(const char *ptr)
+{
+	char c;
+
+	while ((c = *ptr++) != '\0') {
+		if (c == '\n')
+			putc('\r');
+		putc(c);
+	}
+}
+#define ARCH_HAVE_DECOMP_PUTS
+
+#endif /* __MACH_PUV3_UNCOMPRESS_H__ */
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
new file mode 100644
index 00000000..aeb0f181
--- /dev/null
+++ b/arch/unicore32/kernel/Makefile
@@ -0,0 +1,32 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y				:= dma.o elf.o entry.o process.o ptrace.o
+obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
+
+obj-$(CONFIG_MODULES)		+= ksyms.o module.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+
+obj-$(CONFIG_CPU_FREQ)		+= cpu-ucv2.o
+obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
+
+# obj-y for architecture PKUnity v3
+obj-$(CONFIG_ARCH_PUV3)		+= clock.o irq.o time.o
+
+obj-$(CONFIG_PUV3_GPIO)		+= gpio.o
+obj-$(CONFIG_PUV3_PWM)		+= pwm.o
+obj-$(CONFIG_PUV3_PM)		+= pm.o sleep.o
+obj-$(CONFIG_HIBERNATION)	+= hibernate.o hibernate_asm.o
+
+obj-$(CONFIG_PCI)		+= pci.o
+
+# obj-y for specific machines
+obj-$(CONFIG_ARCH_PUV3)		+= puv3-core.o
+obj-$(CONFIG_PUV3_NB0916)	+= puv3-nb0916.o
+
+head-y				:= head.o
+obj-$(CONFIG_DEBUG_LL)		+= debug.o
+
+extra-y				:= $(head-y) init_task.o vmlinux.lds
diff --git a/arch/unicore32/kernel/asm-offsets.c b/arch/unicore32/kernel/asm-offsets.c
new file mode 100644
index 00000000..ffcbe753
--- /dev/null
+++ b/arch/unicore32/kernel/asm-offsets.c
@@ -0,0 +1,112 @@
+/*
+ * linux/arch/unicore32/kernel/asm-offsets.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed to extract
+ * and format the required data.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/kbuild.h>
+#include <linux/suspend.h>
+#include <linux/thread_info.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+
+/*
+ * GCC 3.0, 3.1: general bad code generation.
+ * GCC 3.2.0: incorrect function argument offset calculation.
+ * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
+ *	(http://gcc.gnu.org/PR8896) and incorrect structure
+ *		initialisation in fs/jffs2/erase.c
+ */
+#if (__GNUC__ < 4)
+#error Your compiler should upgrade to uc4
+#error	Known good compilers: 4.2.2
+#endif
+
+int main(void)
+{
+	DEFINE(TSK_ACTIVE_MM,	offsetof(struct task_struct, active_mm));
+	BLANK();
+	DEFINE(TI_FLAGS,	offsetof(struct thread_info, flags));
+	DEFINE(TI_PREEMPT,	offsetof(struct thread_info, preempt_count));
+	DEFINE(TI_ADDR_LIMIT,	offsetof(struct thread_info, addr_limit));
+	DEFINE(TI_TASK,		offsetof(struct thread_info, task));
+	DEFINE(TI_EXEC_DOMAIN,	offsetof(struct thread_info, exec_domain));
+	DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
+	DEFINE(TI_CPU_SAVE,	offsetof(struct thread_info, cpu_context));
+	DEFINE(TI_USED_CP,	offsetof(struct thread_info, used_cp));
+#ifdef CONFIG_UNICORE_FPU_F64
+	DEFINE(TI_FPSTATE,	offsetof(struct thread_info, fpstate));
+#endif
+	BLANK();
+	DEFINE(S_R0,		offsetof(struct pt_regs, UCreg_00));
+	DEFINE(S_R1,		offsetof(struct pt_regs, UCreg_01));
+	DEFINE(S_R2,		offsetof(struct pt_regs, UCreg_02));
+	DEFINE(S_R3,		offsetof(struct pt_regs, UCreg_03));
+	DEFINE(S_R4,		offsetof(struct pt_regs, UCreg_04));
+	DEFINE(S_R5,		offsetof(struct pt_regs, UCreg_05));
+	DEFINE(S_R6,		offsetof(struct pt_regs, UCreg_06));
+	DEFINE(S_R7,		offsetof(struct pt_regs, UCreg_07));
+	DEFINE(S_R8,		offsetof(struct pt_regs, UCreg_08));
+	DEFINE(S_R9,		offsetof(struct pt_regs, UCreg_09));
+	DEFINE(S_R10,		offsetof(struct pt_regs, UCreg_10));
+	DEFINE(S_R11,		offsetof(struct pt_regs, UCreg_11));
+	DEFINE(S_R12,		offsetof(struct pt_regs, UCreg_12));
+	DEFINE(S_R13,		offsetof(struct pt_regs, UCreg_13));
+	DEFINE(S_R14,		offsetof(struct pt_regs, UCreg_14));
+	DEFINE(S_R15,		offsetof(struct pt_regs, UCreg_15));
+	DEFINE(S_R16,		offsetof(struct pt_regs, UCreg_16));
+	DEFINE(S_R17,		offsetof(struct pt_regs, UCreg_17));
+	DEFINE(S_R18,		offsetof(struct pt_regs, UCreg_18));
+	DEFINE(S_R19,		offsetof(struct pt_regs, UCreg_19));
+	DEFINE(S_R20,		offsetof(struct pt_regs, UCreg_20));
+	DEFINE(S_R21,		offsetof(struct pt_regs, UCreg_21));
+	DEFINE(S_R22,		offsetof(struct pt_regs, UCreg_22));
+	DEFINE(S_R23,		offsetof(struct pt_regs, UCreg_23));
+	DEFINE(S_R24,		offsetof(struct pt_regs, UCreg_24));
+	DEFINE(S_R25,		offsetof(struct pt_regs, UCreg_25));
+	DEFINE(S_R26,		offsetof(struct pt_regs, UCreg_26));
+	DEFINE(S_FP,		offsetof(struct pt_regs, UCreg_fp));
+	DEFINE(S_IP,		offsetof(struct pt_regs, UCreg_ip));
+	DEFINE(S_SP,		offsetof(struct pt_regs, UCreg_sp));
+	DEFINE(S_LR,		offsetof(struct pt_regs, UCreg_lr));
+	DEFINE(S_PC,		offsetof(struct pt_regs, UCreg_pc));
+	DEFINE(S_PSR,		offsetof(struct pt_regs, UCreg_asr));
+	DEFINE(S_OLD_R0,	offsetof(struct pt_regs, UCreg_ORIG_00));
+	DEFINE(S_FRAME_SIZE,	sizeof(struct pt_regs));
+	BLANK();
+	DEFINE(VMA_VM_MM,	offsetof(struct vm_area_struct, vm_mm));
+	DEFINE(VMA_VM_FLAGS,	offsetof(struct vm_area_struct, vm_flags));
+	BLANK();
+	DEFINE(VM_EXEC,		VM_EXEC);
+	BLANK();
+	DEFINE(PAGE_SZ,		PAGE_SIZE);
+	BLANK();
+	DEFINE(SYS_ERROR0,	0x9f0000);
+	BLANK();
+	DEFINE(PBE_ADDRESS,		offsetof(struct pbe, address));
+	DEFINE(PBE_ORIN_ADDRESS,	offsetof(struct pbe, orig_address));
+	DEFINE(PBE_NEXT,		offsetof(struct pbe, next));
+	DEFINE(SWSUSP_CPU,		offsetof(struct swsusp_arch_regs, \
+							cpu_context));
+#ifdef	CONFIG_UNICORE_FPU_F64
+	DEFINE(SWSUSP_FPSTATE,		offsetof(struct swsusp_arch_regs, \
+							fpstate));
+#endif
+	BLANK();
+	DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
+	DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
+	DEFINE(DMA_FROM_DEVICE,		DMA_FROM_DEVICE);
+	return 0;
+}
diff --git a/arch/unicore32/kernel/clock.c b/arch/unicore32/kernel/clock.c
new file mode 100644
index 00000000..18d4563e
--- /dev/null
+++ b/arch/unicore32/kernel/clock.c
@@ -0,0 +1,390 @@
+/*
+ * linux/arch/unicore32/kernel/clock.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+/*
+ * Very simple clock implementation
+ */
+struct clk {
+	struct list_head	node;
+	unsigned long		rate;
+	const char		*name;
+};
+
+static struct clk clk_ost_clk = {
+	.name		= "OST_CLK",
+	.rate		= CLOCK_TICK_RATE,
+};
+
+static struct clk clk_mclk_clk = {
+	.name		= "MAIN_CLK",
+};
+
+static struct clk clk_bclk32_clk = {
+	.name		= "BUS32_CLK",
+};
+
+static struct clk clk_ddr_clk = {
+	.name		= "DDR_CLK",
+};
+
+static struct clk clk_vga_clk = {
+	.name		= "VGA_CLK",
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0) {
+			clk = p;
+			break;
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct {
+	unsigned long rate;
+	unsigned long cfg;
+	unsigned long div;
+} vga_clk_table[] = {
+	{.rate =  25175000, .cfg = 0x00002001, .div = 0x9},
+	{.rate =  31500000, .cfg = 0x00002001, .div = 0x7},
+	{.rate =  40000000, .cfg = 0x00003801, .div = 0x9},
+	{.rate =  49500000, .cfg = 0x00003801, .div = 0x7},
+	{.rate =  65000000, .cfg = 0x00002c01, .div = 0x4},
+	{.rate =  78750000, .cfg = 0x00002400, .div = 0x7},
+	{.rate = 108000000, .cfg = 0x00002c01, .div = 0x2},
+	{.rate = 106500000, .cfg = 0x00003c01, .div = 0x3},
+	{.rate =  50650000, .cfg = 0x00106400, .div = 0x9},
+	{.rate =  61500000, .cfg = 0x00106400, .div = 0xa},
+	{.rate =  85500000, .cfg = 0x00002800, .div = 0x6},
+};
+
+struct {
+	unsigned long mrate;
+	unsigned long prate;
+} mclk_clk_table[] = {
+	{.mrate = 500000000, .prate = 0x00109801},
+	{.mrate = 525000000, .prate = 0x00104C00},
+	{.mrate = 550000000, .prate = 0x00105000},
+	{.mrate = 575000000, .prate = 0x00105400},
+	{.mrate = 600000000, .prate = 0x00105800},
+	{.mrate = 625000000, .prate = 0x00105C00},
+	{.mrate = 650000000, .prate = 0x00106000},
+	{.mrate = 675000000, .prate = 0x00106400},
+	{.mrate = 700000000, .prate = 0x00106800},
+	{.mrate = 725000000, .prate = 0x00106C00},
+	{.mrate = 750000000, .prate = 0x00107000},
+	{.mrate = 775000000, .prate = 0x00107400},
+	{.mrate = 800000000, .prate = 0x00107800},
+};
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk == &clk_vga_clk) {
+		unsigned long pll_vgacfg, pll_vgadiv;
+		int ret, i;
+
+		/* lookup vga_clk_table */
+		ret = -EINVAL;
+		for (i = 0; i < ARRAY_SIZE(vga_clk_table); i++) {
+			if (rate == vga_clk_table[i].rate) {
+				pll_vgacfg = vga_clk_table[i].cfg;
+				pll_vgadiv = vga_clk_table[i].div;
+				ret = 0;
+				break;
+			}
+		}
+
+		if (ret)
+			return ret;
+
+		if (readl(PM_PLLVGACFG) == pll_vgacfg)
+			return 0;
+
+		/* set pll vga cfg reg. */
+		writel(pll_vgacfg, PM_PLLVGACFG);
+
+		writel(PM_PMCR_CFBVGA, PM_PMCR);
+		while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_VGADFC)
+				!= PM_PLLDFCDONE_VGADFC)
+			udelay(100); /* about 1ms */
+
+		/* set div cfg reg. */
+		writel(readl(PM_PCGR) | PM_PCGR_VGACLK, PM_PCGR);
+
+		writel((readl(PM_DIVCFG) & ~PM_DIVCFG_VGACLK_MASK)
+				| PM_DIVCFG_VGACLK(pll_vgadiv), PM_DIVCFG);
+
+		writel(readl(PM_SWRESET) | PM_SWRESET_VGADIV, PM_SWRESET);
+		while ((readl(PM_SWRESET) & PM_SWRESET_VGADIV)
+				== PM_SWRESET_VGADIV)
+			udelay(100); /* 65536 bclk32, about 320us */
+
+		writel(readl(PM_PCGR) & ~PM_PCGR_VGACLK, PM_PCGR);
+	}
+#ifdef CONFIG_CPU_FREQ
+	if (clk == &clk_mclk_clk) {
+		u32 pll_rate, divstatus = PM_DIVSTATUS;
+		int ret, i;
+
+		/* lookup mclk_clk_table */
+		ret = -EINVAL;
+		for (i = 0; i < ARRAY_SIZE(mclk_clk_table); i++) {
+			if (rate == mclk_clk_table[i].mrate) {
+				pll_rate = mclk_clk_table[i].prate;
+				clk_mclk_clk.rate = mclk_clk_table[i].mrate;
+				ret = 0;
+				break;
+			}
+		}
+
+		if (ret)
+			return ret;
+
+		if (clk_mclk_clk.rate)
+			clk_bclk32_clk.rate = clk_mclk_clk.rate
+				/ (((divstatus & 0x0000f000) >> 12) + 1);
+
+		/* set pll sys cfg reg. */
+		PM_PLLSYSCFG = pll_rate;
+
+		PM_PMCR = PM_PMCR_CFBSYS;
+		while ((PM_PLLDFCDONE & PM_PLLDFCDONE_SYSDFC)
+				!= PM_PLLDFCDONE_SYSDFC)
+			udelay(100);
+			/* about 1ms */
+	}
+#endif
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+	printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name,
+		(clk->rate)/1000000, (clk->rate)/10000 % 100);
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_del(&clk->node);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+struct {
+	unsigned long prate;
+	unsigned long rate;
+} pllrate_table[] = {
+	{.prate = 0x00002001, .rate = 250000000},
+	{.prate = 0x00104801, .rate = 250000000},
+	{.prate = 0x00104C01, .rate = 262500000},
+	{.prate = 0x00002401, .rate = 275000000},
+	{.prate = 0x00105001, .rate = 275000000},
+	{.prate = 0x00105401, .rate = 287500000},
+	{.prate = 0x00002801, .rate = 300000000},
+	{.prate = 0x00105801, .rate = 300000000},
+	{.prate = 0x00105C01, .rate = 312500000},
+	{.prate = 0x00002C01, .rate = 325000000},
+	{.prate = 0x00106001, .rate = 325000000},
+	{.prate = 0x00106401, .rate = 337500000},
+	{.prate = 0x00003001, .rate = 350000000},
+	{.prate = 0x00106801, .rate = 350000000},
+	{.prate = 0x00106C01, .rate = 362500000},
+	{.prate = 0x00003401, .rate = 375000000},
+	{.prate = 0x00107001, .rate = 375000000},
+	{.prate = 0x00107401, .rate = 387500000},
+	{.prate = 0x00003801, .rate = 400000000},
+	{.prate = 0x00107801, .rate = 400000000},
+	{.prate = 0x00107C01, .rate = 412500000},
+	{.prate = 0x00003C01, .rate = 425000000},
+	{.prate = 0x00108001, .rate = 425000000},
+	{.prate = 0x00108401, .rate = 437500000},
+	{.prate = 0x00004001, .rate = 450000000},
+	{.prate = 0x00108801, .rate = 450000000},
+	{.prate = 0x00108C01, .rate = 462500000},
+	{.prate = 0x00004401, .rate = 475000000},
+	{.prate = 0x00109001, .rate = 475000000},
+	{.prate = 0x00109401, .rate = 487500000},
+	{.prate = 0x00004801, .rate = 500000000},
+	{.prate = 0x00109801, .rate = 500000000},
+	{.prate = 0x00104C00, .rate = 525000000},
+	{.prate = 0x00002400, .rate = 550000000},
+	{.prate = 0x00105000, .rate = 550000000},
+	{.prate = 0x00105400, .rate = 575000000},
+	{.prate = 0x00002800, .rate = 600000000},
+	{.prate = 0x00105800, .rate = 600000000},
+	{.prate = 0x00105C00, .rate = 625000000},
+	{.prate = 0x00002C00, .rate = 650000000},
+	{.prate = 0x00106000, .rate = 650000000},
+	{.prate = 0x00106400, .rate = 675000000},
+	{.prate = 0x00003000, .rate = 700000000},
+	{.prate = 0x00106800, .rate = 700000000},
+	{.prate = 0x00106C00, .rate = 725000000},
+	{.prate = 0x00003400, .rate = 750000000},
+	{.prate = 0x00107000, .rate = 750000000},
+	{.prate = 0x00107400, .rate = 775000000},
+	{.prate = 0x00003800, .rate = 800000000},
+	{.prate = 0x00107800, .rate = 800000000},
+	{.prate = 0x00107C00, .rate = 825000000},
+	{.prate = 0x00003C00, .rate = 850000000},
+	{.prate = 0x00108000, .rate = 850000000},
+	{.prate = 0x00108400, .rate = 875000000},
+	{.prate = 0x00004000, .rate = 900000000},
+	{.prate = 0x00108800, .rate = 900000000},
+	{.prate = 0x00108C00, .rate = 925000000},
+	{.prate = 0x00004400, .rate = 950000000},
+	{.prate = 0x00109000, .rate = 950000000},
+	{.prate = 0x00109400, .rate = 975000000},
+	{.prate = 0x00004800, .rate = 1000000000},
+	{.prate = 0x00109800, .rate = 1000000000},
+};
+
+struct {
+	unsigned long prate;
+	unsigned long drate;
+} pddr_table[] = {
+	{.prate = 0x00100800, .drate = 44236800},
+	{.prate = 0x00100C00, .drate = 66355200},
+	{.prate = 0x00101000, .drate = 88473600},
+	{.prate = 0x00101400, .drate = 110592000},
+	{.prate = 0x00101800, .drate = 132710400},
+	{.prate = 0x00101C01, .drate = 154828800},
+	{.prate = 0x00102001, .drate = 176947200},
+	{.prate = 0x00102401, .drate = 199065600},
+	{.prate = 0x00102801, .drate = 221184000},
+	{.prate = 0x00102C01, .drate = 243302400},
+	{.prate = 0x00103001, .drate = 265420800},
+	{.prate = 0x00103401, .drate = 287539200},
+	{.prate = 0x00103801, .drate = 309657600},
+	{.prate = 0x00103C01, .drate = 331776000},
+	{.prate = 0x00104001, .drate = 353894400},
+};
+
+static int __init clk_init(void)
+{
+#ifdef CONFIG_PUV3_PM
+	u32 pllrate, divstatus = readl(PM_DIVSTATUS);
+	u32 pcgr_val = readl(PM_PCGR);
+	int i;
+
+	pcgr_val |= PM_PCGR_BCLKMME | PM_PCGR_BCLKH264E | PM_PCGR_BCLKH264D
+			| PM_PCGR_HECLK | PM_PCGR_HDCLK;
+	writel(pcgr_val, PM_PCGR);
+
+	pllrate = readl(PM_PLLSYSSTATUS);
+
+	/* lookup pmclk_table */
+	clk_mclk_clk.rate = 0;
+	for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
+		if (pllrate == pllrate_table[i].prate) {
+			clk_mclk_clk.rate = pllrate_table[i].rate;
+			break;
+		}
+	}
+
+	if (clk_mclk_clk.rate)
+		clk_bclk32_clk.rate = clk_mclk_clk.rate /
+			(((divstatus & 0x0000f000) >> 12) + 1);
+
+	pllrate = readl(PM_PLLDDRSTATUS);
+
+	/* lookup pddr_table */
+	clk_ddr_clk.rate = 0;
+	for (i = 0; i < ARRAY_SIZE(pddr_table); i++) {
+		if (pllrate == pddr_table[i].prate) {
+			clk_ddr_clk.rate = pddr_table[i].drate;
+			break;
+		}
+	}
+
+	pllrate = readl(PM_PLLVGASTATUS);
+
+	/* lookup pvga_table */
+	clk_vga_clk.rate = 0;
+	for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
+		if (pllrate == pllrate_table[i].prate) {
+			clk_vga_clk.rate = pllrate_table[i].rate;
+			break;
+		}
+	}
+
+	if (clk_vga_clk.rate)
+		clk_vga_clk.rate = clk_vga_clk.rate /
+			(((divstatus & 0x00f00000) >> 20) + 1);
+
+	clk_register(&clk_vga_clk);
+#endif
+#ifdef CONFIG_ARCH_FPGA
+	clk_ddr_clk.rate = 33000000;
+	clk_mclk_clk.rate = 33000000;
+	clk_bclk32_clk.rate = 33000000;
+#endif
+	clk_register(&clk_ddr_clk);
+	clk_register(&clk_mclk_clk);
+	clk_register(&clk_bclk32_clk);
+	clk_register(&clk_ost_clk);
+	return 0;
+}
+core_initcall(clk_init);
diff --git a/arch/unicore32/kernel/cpu-ucv2.c b/arch/unicore32/kernel/cpu-ucv2.c
new file mode 100644
index 00000000..4a99f625
--- /dev/null
+++ b/arch/unicore32/kernel/cpu-ucv2.c
@@ -0,0 +1,93 @@
+/*
+ * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+
+static struct cpufreq_driver ucv2_driver;
+
+/* make sure that only the "userspace" governor is run
+ * -- anything else wouldn't make sense on this platform, anyway.
+ */
+int ucv2_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy,
+			policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+
+	return 0;
+}
+
+static unsigned int ucv2_getspeed(unsigned int cpu)
+{
+	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
+
+	if (cpu)
+		return 0;
+	return clk_get_rate(mclk)/1000;
+}
+
+static int ucv2_target(struct cpufreq_policy *policy,
+			 unsigned int target_freq,
+			 unsigned int relation)
+{
+	unsigned int cur = ucv2_getspeed(0);
+	struct cpufreq_freqs freqs;
+	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	if (!clk_set_rate(mclk, target_freq * 1000)) {
+		freqs.old = cur;
+		freqs.new = target_freq;
+		freqs.cpu = 0;
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+	policy->cur = ucv2_getspeed(0);
+	policy->min = policy->cpuinfo.min_freq = 250000;
+	policy->max = policy->cpuinfo.max_freq = 1000000;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	return 0;
+}
+
+static struct cpufreq_driver ucv2_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= ucv2_verify_speed,
+	.target		= ucv2_target,
+	.get		= ucv2_getspeed,
+	.init		= ucv2_cpu_init,
+	.name		= "UniCore-II",
+};
+
+static int __init ucv2_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&ucv2_driver);
+}
+
+arch_initcall(ucv2_cpufreq_init);
diff --git a/arch/unicore32/kernel/debug-macro.S b/arch/unicore32/kernel/debug-macro.S
new file mode 100644
index 00000000..2711d6d8
--- /dev/null
+++ b/arch/unicore32/kernel/debug-macro.S
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/unicore32/kernel/debug-macro.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Debugging macro include header
+ */
+#include <generated/asm-offsets.h>
+#include <mach/hardware.h>
+
+		.macro	put_word_ocd, rd, rx=r16
+1001:		movc		\rx, p1.c0, #0
+		cand.a	\rx, #2
+		bne	1001b
+		movc		p1.c1, \rd, #1
+		.endm
+
+#ifdef CONFIG_DEBUG_OCD
+		/* debug using UniCore On-Chip-Debugger */
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		put_word_ocd	\rd, \rx
+		.endm
+
+		.macro	busyuart, rd, rx
+		.endm
+
+		.macro	waituart, rd, rx
+		.endm
+#else
+#define UART_CLK_DEFAULT        3686400 * 20
+	/* Uartclk = MCLK/ 2, The MCLK on my board is 3686400 * 40  */
+#define BAUD_RATE_DEFAULT	115200
+	/* The baud rate of the serial port */
+
+#define UART_DIVISOR_DEFAULT	(UART_CLK_DEFAULT \
+				/ (16 * BAUD_RATE_DEFAULT) - 1)
+
+		.macro	addruart,rx
+		mrc	p0, #0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xee000000	@ physical base address
+		movne	\rx, #0x6e000000	@ virtual address
+
+		@ We probe for the active serial port here
+		@ However, now we assume UART0 is active:	epip4d
+		@ We assume r1 and r2 can be clobbered.
+
+		movl 	r2, #UART_DIVISOR_DEFAULT
+		mov 	r1, #0x80
+		str	r1, [\rx, #UART_LCR_OFFSET]
+		and	r1, r2, #0xff00
+		mov	r1, r1, lsr #8
+		str	r1, [\rx, #UART_DLH_OFFSET]
+		and	r1, r2, #0xff
+		str	r1, [\rx, #UART_DLL_OFFSET]
+		mov 	r1, #0x7
+		str	r1, [\rx, #UART_FCR_OFFSET]
+		mov 	r1, #0x3
+		str	r1, [\rx, #UART_LCR_OFFSET]
+		mov 	r1, #0x0
+		str	r1, [\rx, #UART_IER_OFFSET]
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UART_THR_OFFSET]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UART_LSR_OFFSET]
+		tst	\rd, #UART_LSR_THRE
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UART_LSR_OFFSET]
+		tst	\rd, #UART_LSR_TEMT
+		bne	1001b
+		.endm
+#endif
+
diff --git a/arch/unicore32/kernel/debug.S b/arch/unicore32/kernel/debug.S
new file mode 100644
index 00000000..029fd12f
--- /dev/null
+++ b/arch/unicore32/kernel/debug.S
@@ -0,0 +1,85 @@
+/*
+ * linux/arch/unicore32/kernel/debug.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  32-bit debugging code
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+		.text
+
+/*
+ * Some debugging routines (useful if you've got MM problems and
+ * printk isn't working).  For DEBUGGING ONLY!!!  Do not leave
+ * references to these in a production kernel!
+ */
+#include "debug-macro.S"
+
+/*
+ * Useful debugging routines
+ */
+ENTRY(printhex8)
+		mov	r1, #8
+		b	printhex
+ENDPROC(printhex8)
+
+ENTRY(printhex4)
+		mov	r1, #4
+		b	printhex
+ENDPROC(printhex4)
+
+ENTRY(printhex2)
+		mov	r1, #2
+printhex:	adr	r2, hexbuf
+		add	r3, r2, r1
+		mov	r1, #0
+		stb	r1, [r3]
+1:		and	r1, r0, #15
+		mov	r0, r0 >> #4
+		csub.a	r1, #10
+		beg	2f
+		add	r1, r1, #'0' - 'a' + 10
+2:		add	r1, r1, #'a' - 10
+		stb.w	r1, [r3+], #-1
+		cxor.a	r3, r2
+		bne	1b
+		mov	r0, r2
+		b	printascii
+ENDPROC(printhex2)
+
+		.ltorg
+
+ENTRY(printascii)
+		addruart r3
+		b	2f
+1:		waituart r2, r3
+		senduart r1, r3
+		busyuart r2, r3
+		cxor.a	r1, #'\n'
+		cmoveq	r1, #'\r'
+		beq	1b
+2:		cxor.a	r0, #0
+		beq	3f
+		ldb.w	r1, [r0]+, #1
+		cxor.a	r1, #0
+		bne	1b
+3:		mov	pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+		addruart r3
+		mov	r1, r0
+		mov	r0, #0
+		b	1b
+ENDPROC(printch)
+
+hexbuf:		.space 16
+
diff --git a/arch/unicore32/kernel/dma.c b/arch/unicore32/kernel/dma.c
new file mode 100644
index 00000000..ed2d4d78
--- /dev/null
+++ b/arch/unicore32/kernel/dma.c
@@ -0,0 +1,182 @@
+/*
+ * linux/arch/unicore32/kernel/dma.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+struct dma_channel {
+	char *name;
+	puv3_dma_prio prio;
+	void (*irq_handler)(int, void *);
+	void (*err_handler)(int, void *);
+	void *data;
+};
+
+static struct dma_channel dma_channels[MAX_DMA_CHANNELS];
+
+int puv3_request_dma(char *name, puv3_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void (*err_handler)(int, void *),
+			 void *data)
+{
+	unsigned long flags;
+	int i, found = 0;
+
+	/* basic sanity checks */
+	if (!name)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	do {
+		/* try grabbing a DMA channel with the requested priority */
+		for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+			if ((dma_channels[i].prio == prio) &&
+			    !dma_channels[i].name) {
+				found = 1;
+				break;
+			}
+		}
+		/* if requested prio group is full, try a hier priority */
+	} while (!found && prio--);
+
+	if (found) {
+		dma_channels[i].name = name;
+		dma_channels[i].irq_handler = irq_handler;
+		dma_channels[i].err_handler = err_handler;
+		dma_channels[i].data = data;
+	} else {
+		printk(KERN_WARNING "No more available DMA channels for %s\n",
+				name);
+		i = -ENODEV;
+	}
+
+	local_irq_restore(flags);
+	return i;
+}
+EXPORT_SYMBOL(puv3_request_dma);
+
+void puv3_free_dma(int dma_ch)
+{
+	unsigned long flags;
+
+	if (!dma_channels[dma_ch].name) {
+		printk(KERN_CRIT
+			"%s: trying to free channel %d which is already freed\n",
+			__func__, dma_ch);
+		return;
+	}
+
+	local_irq_save(flags);
+	dma_channels[dma_ch].name = NULL;
+	dma_channels[dma_ch].err_handler = NULL;
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(puv3_free_dma);
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+	int i, dint;
+
+	dint = readl(DMAC_ITCSR);
+	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+		if (dint & DMAC_CHANNEL(i)) {
+			struct dma_channel *channel = &dma_channels[i];
+
+			/* Clear TC interrupt of channel i */
+			writel(DMAC_CHANNEL(i), DMAC_ITCCR);
+			writel(0, DMAC_ITCCR);
+
+			if (channel->name && channel->irq_handler) {
+				channel->irq_handler(i, channel->data);
+			} else {
+				/*
+				 * IRQ for an unregistered DMA channel:
+				 * let's clear the interrupts and disable it.
+				 */
+				printk(KERN_WARNING "spurious IRQ for"
+						" DMA channel %d\n", i);
+			}
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_err_handler(int irq, void *dev_id)
+{
+	int i, dint;
+
+	dint = readl(DMAC_IESR);
+	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+		if (dint & DMAC_CHANNEL(i)) {
+			struct dma_channel *channel = &dma_channels[i];
+
+			/* Clear Err interrupt of channel i */
+			writel(DMAC_CHANNEL(i), DMAC_IECR);
+			writel(0, DMAC_IECR);
+
+			if (channel->name && channel->err_handler) {
+				channel->err_handler(i, channel->data);
+			} else {
+				/*
+				 * IRQ for an unregistered DMA channel:
+				 * let's clear the interrupts and disable it.
+				 */
+				printk(KERN_WARNING "spurious IRQ for"
+						" DMA channel %d\n", i);
+			}
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+int __init puv3_init_dma(void)
+{
+	int i, ret;
+
+	/* dma channel priorities on v8 processors:
+	 * ch 0 - 1  <--> (0) DMA_PRIO_HIGH
+	 * ch 2 - 3  <--> (1) DMA_PRIO_MEDIUM
+	 * ch 4 - 5  <--> (2) DMA_PRIO_LOW
+	 */
+	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+		puv3_stop_dma(i);
+		dma_channels[i].name = NULL;
+		dma_channels[i].prio = min((i & 0x7) >> 1, DMA_PRIO_LOW);
+	}
+
+	ret = request_irq(IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
+	if (ret) {
+		printk(KERN_CRIT "Can't register IRQ for DMA\n");
+		return ret;
+	}
+
+	ret = request_irq(IRQ_DMAERR, dma_err_handler, 0, "DMAERR", NULL);
+	if (ret) {
+		printk(KERN_CRIT "Can't register IRQ for DMAERR\n");
+		free_irq(IRQ_DMA, "DMA");
+		return ret;
+	}
+
+	return 0;
+}
+
+postcore_initcall(puv3_init_dma);
diff --git a/arch/unicore32/kernel/early_printk.c b/arch/unicore32/kernel/early_printk.c
new file mode 100644
index 00000000..3922255f
--- /dev/null
+++ b/arch/unicore32/kernel/early_printk.c
@@ -0,0 +1,59 @@
+/*
+ * linux/arch/unicore32/kernel/early_printk.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <mach/ocd.h>
+
+/* On-Chip-Debugger functions */
+
+static void early_ocd_write(struct console *con, const char *s, unsigned n)
+{
+	while (*s && n-- > 0) {
+		if (*s == '\n')
+			ocd_putc((int)'\r');
+		ocd_putc((int)*s);
+		s++;
+	}
+}
+
+static struct console early_ocd_console = {
+	.name =		"earlyocd",
+	.write =	early_ocd_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+/* Direct interface for emergencies */
+static struct console *early_console = &early_ocd_console;
+
+static int __initdata keep_early;
+
+static int __init setup_early_printk(char *buf)
+{
+	if (!buf)
+		return 0;
+
+	if (strstr(buf, "keep"))
+		keep_early = 1;
+
+	if (!strncmp(buf, "ocd", 3))
+		early_console = &early_ocd_console;
+
+	if (keep_early)
+		early_console->flags &= ~CON_BOOT;
+	else
+		early_console->flags |= CON_BOOT;
+	register_console(early_console);
+	return 0;
+}
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/unicore32/kernel/elf.c b/arch/unicore32/kernel/elf.c
new file mode 100644
index 00000000..0a176734
--- /dev/null
+++ b/arch/unicore32/kernel/elf.c
@@ -0,0 +1,38 @@
+/*
+ * linux/arch/unicore32/kernel/elf.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+
+int elf_check_arch(const struct elf32_hdr *x)
+{
+	/* Make sure it's an UniCore executable */
+	if (x->e_machine != EM_UNICORE)
+		return 0;
+
+	/* Make sure the entry address is reasonable */
+	if (x->e_entry & 3)
+		return 0;
+
+	return 1;
+}
+EXPORT_SYMBOL(elf_check_arch);
+
+void elf_set_personality(const struct elf32_hdr *x)
+{
+	unsigned int personality = PER_LINUX;
+
+	set_personality(personality);
+}
+EXPORT_SYMBOL(elf_set_personality);
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
new file mode 100644
index 00000000..00a259f9
--- /dev/null
+++ b/arch/unicore32/kernel/entry.S
@@ -0,0 +1,824 @@
+/*
+ * linux/arch/unicore32/kernel/entry.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Low-level vector interface routines
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/unistd.h>
+#include <generated/asm-offsets.h>
+#include "debug-macro.S"
+
+@
+@ Most of the stack format comes from struct pt_regs, but with
+@ the addition of 8 bytes for storing syscall args 5 and 6.
+@
+#define S_OFF		8
+
+/*
+ * The SWI code relies on the fact that R0 is at the bottom of the stack
+ * (due to slow/fast restore user regs).
+ */
+#if S_R0 != 0
+#error "Please fix"
+#endif
+
+	.macro	zero_fp
+#ifdef CONFIG_FRAME_POINTER
+	mov	fp, #0
+#endif
+	.endm
+
+	.macro	alignment_trap, rtemp
+#ifdef CONFIG_ALIGNMENT_TRAP
+	ldw	\rtemp, .LCcralign
+	ldw	\rtemp, [\rtemp]
+	movc	p0.c1, \rtemp, #0
+#endif
+	.endm
+
+	.macro	load_user_sp_lr, rd, rtemp, offset = 0
+	mov	\rtemp, asr
+	xor	\rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
+	mov.a	asr, \rtemp			@ switch to the SUSR mode
+
+	ldw	sp, [\rd+], #\offset		@ load sp_user
+	ldw	lr, [\rd+], #\offset + 4	@ load lr_user
+
+	xor	\rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
+	mov.a	asr, \rtemp			@ switch back to the PRIV mode
+	.endm
+
+	.macro	priv_exit, rpsr
+	mov.a	bsr, \rpsr
+	ldm.w	(r0 - r15), [sp]+
+	ldm.b	(r16 - pc), [sp]+		@ load r0 - pc, asr
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	ldw	r1, [sp+], #\offset + S_PSR	@ get calling asr
+	ldw	lr, [sp+], #\offset + S_PC	@ get pc
+	mov.a	bsr, r1				@ save in bsr_priv
+	.if	\fast
+	add	sp, sp, #\offset + S_R1		@ r0 is syscall return value
+	ldm.w	(r1 - r15), [sp]+		@ get calling r1 - r15
+	ldur	(r16 - lr), [sp]+		@ get calling r16 - lr
+	.else
+	ldm.w	(r0 - r15), [sp]+		@ get calling r0 - r15
+	ldur	(r16 - lr), [sp]+		@ get calling r16 - lr
+	.endif
+	nop
+	add	sp, sp, #S_FRAME_SIZE - S_R16
+	mov.a	pc, lr				@ return
+						@ and move bsr_priv into asr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp >> #13
+	mov	\rd, \rd << #13
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldw	\base, =(PKUNITY_INTC_BASE)
+	ldw	\irqstat, [\base+], #0xC	@ INTC_ICIP
+	ldw	\tmp,	  [\base+], #0x4	@ INTC_ICMR
+	and.a	\irqstat, \irqstat, \tmp
+	beq	1001f
+	cntlz	\irqnr, \irqstat
+	rsub	\irqnr, \irqnr, #31
+1001:	/* EQ will be set if no irqs pending */
+	.endm
+
+#ifdef CONFIG_DEBUG_LL
+	.macro	printreg, reg, temp
+		adr	\temp, 901f
+		stm	(r0-r3), [\temp]+
+		stw	lr, [\temp+], #0x10
+		mov	r0, \reg
+		b.l	printhex8
+		mov	r0, #':'
+		b.l	printch
+		mov	r0, pc
+		b.l	printhex8
+		adr	r0, 902f
+		b.l	printascii
+		adr	\temp, 901f
+		ldm	(r0-r3), [\temp]+
+		ldw	lr, [\temp+], #0x10
+		b	903f
+901:	.word	0, 0, 0, 0, 0	@ r0-r3, lr
+902:	.asciz	": epip4d\n"
+	.align
+903:
+	.endm
+#endif
+
+/*
+ * These are the registers used in the syscall handler, and allow us to
+ * have in theory up to 7 arguments to a function - r0 to r6.
+ *
+ * Note that tbl == why is intentional.
+ *
+ * We must set at least "tsk" and "why" when calling ret_with_reschedule.
+ */
+scno	.req	r21		@ syscall number
+tbl	.req	r22		@ syscall table pointer
+why	.req	r22		@ Linux syscall (!= 0)
+tsk	.req	r23		@ current thread_info
+
+/*
+ * Interrupt handling.  Preserves r17, r18, r19
+ */
+	.macro	intr_handler
+1:	get_irqnr_and_base r0, r6, r5, lr
+	beq	2f
+	mov	r1, sp
+	@
+	@ routine called with r0 = irq number, r1 = struct pt_regs *
+	@
+	adr	lr, 1b
+	b	asm_do_IRQ
+2:
+	.endm
+
+/*
+ * PRIV mode handlers
+ */
+	.macro	priv_entry
+	sub	sp, sp, #(S_FRAME_SIZE - 4)
+	stm	(r1 - r15), [sp]+
+	add	r5, sp, #S_R15
+	stm	(r16 - r28), [r5]+
+
+	ldm	(r1 - r3), [r0]+
+	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""      ""       ""
+	add	r0, sp, #(S_FRAME_SIZE - 4)
+	stw.w	r1, [sp+], #-4		@ save the "real" r0 copied
+					@ from the exception stack
+
+	mov	r1, lr
+
+	@
+	@ We are now ready to fill in the remaining blanks on the stack:
+	@
+	@  r0 - sp_priv
+	@  r1 - lr_priv
+	@  r2 - lr_<exception>, already fixed up for correct return/restart
+	@  r3 - bsr_<exception>
+	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
+	@
+	stm	(r0 - r4), [r5]+
+	.endm
+
+/*
+ * User mode handlers
+ *
+ */
+	.macro	user_entry
+	sub	sp, sp, #S_FRAME_SIZE
+	stm	(r1 - r15), [sp+]
+	add	r4, sp, #S_R16
+	stm	(r16 - r28), [r4]+
+
+	ldm	(r1 - r3), [r0]+
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r4, #-1			@  ""  ""     ""        ""
+
+	stw	r1, [sp]		@ save the "real" r0 copied
+					@ from the exception stack
+
+	@
+	@ We are now ready to fill in the remaining blanks on the stack:
+	@
+	@  r2 - lr_<exception>, already fixed up for correct return/restart
+	@  r3 - bsr_<exception>
+	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
+	@
+	@ Also, separately save sp_user and lr_user
+	@
+	stm	(r2 - r4), [r0]+
+	stur	(sp, lr), [r0-]
+
+	@
+	@ Enable the alignment trap while in kernel mode
+	@
+	alignment_trap r0
+
+	@
+	@ Clear FP to mark the first stack frame
+	@
+	zero_fp
+	.endm
+
+	.text
+
+@
+@ __invalid - generic code for failed exception
+@			(re-entrant version of handlers)
+@
+__invalid:
+	sub	sp, sp, #S_FRAME_SIZE
+	stm	(r1 - r15), [sp+]
+	add	r1, sp, #S_R16
+	stm	(r16 - r28, sp, lr), [r1]+
+
+	zero_fp
+
+	ldm	(r4 - r6), [r0]+
+	add	r0, sp, #S_PC		@ here for interlock avoidance
+	mov	r7, #-1			@  ""   ""    ""        ""
+	stw	r4, [sp]		@ save preserved r0
+	stm	(r5 - r7), [r0]+	@ lr_<exception>,
+					@ asr_<exception>, "old_r0"
+
+	mov	r0, sp
+	mov	r1, asr
+	b	bad_mode
+ENDPROC(__invalid)
+
+	.align	5
+__dabt_priv:
+	priv_entry
+
+	@
+	@ get ready to re-enable interrupts if appropriate
+	@
+	mov	r17, asr
+	cand.a	r3, #PSR_I_BIT
+	bne	1f
+	andn	r17, r17, #PSR_I_BIT
+1:
+
+	@
+	@ Call the processor-specific abort handler:
+	@
+	@  r2 - aborted context pc
+	@  r3 - aborted context asr
+	@
+	@ The abort handler must return the aborted address in r0, and
+	@ the fault status register in r1.
+	@
+	movc	r1, p0.c3, #0		@ get FSR
+	movc	r0, p0.c4, #0		@ get FAR
+
+	@
+	@ set desired INTR state, then call main handler
+	@
+	mov.a	asr, r17
+	mov	r2, sp
+	b.l	do_DataAbort
+
+	@
+	@ INTRs off again before pulling preserved data off the stack
+	@
+	disable_irq r0
+
+	@
+	@ restore BSR and restart the instruction
+	@
+	ldw	r2, [sp+], #S_PSR
+	priv_exit r2				@ return from exception
+ENDPROC(__dabt_priv)
+
+	.align	5
+__intr_priv:
+	priv_entry
+
+	intr_handler
+
+	mov	r0, #0				@ epip4d
+	movc	p0.c5, r0, #14
+	nop; nop; nop; nop; nop; nop; nop; nop
+
+	ldw	r4, [sp+], #S_PSR		@ irqs are already disabled
+
+	priv_exit r4				@ return from exception
+ENDPROC(__intr_priv)
+
+	.ltorg
+
+	.align	5
+__extn_priv:
+	priv_entry
+
+	mov	r0, sp				@ struct pt_regs *regs
+	mov	r1, asr
+	b	bad_mode			@ not supported
+ENDPROC(__extn_priv)
+
+	.align	5
+__pabt_priv:
+	priv_entry
+
+	@
+	@ re-enable interrupts if appropriate
+	@
+	mov	r17, asr
+	cand.a	r3, #PSR_I_BIT
+	bne	1f
+	andn	r17, r17, #PSR_I_BIT
+1:
+
+	@
+	@ set args, then call main handler
+	@
+	@  r0 - address of faulting instruction
+	@  r1 - pointer to registers on stack
+	@
+	mov	r0, r2			@ pass address of aborted instruction
+	mov	r1, #5
+	mov.a	asr, r17
+	mov	r2, sp			@ regs
+	b.l	do_PrefetchAbort	@ call abort handler
+
+	@
+	@ INTRs off again before pulling preserved data off the stack
+	@
+	disable_irq r0
+
+	@
+	@ restore BSR and restart the instruction
+	@
+	ldw	r2, [sp+], #S_PSR
+	priv_exit r2			@ return from exception
+ENDPROC(__pabt_priv)
+
+	.align	5
+.LCcralign:
+	.word	cr_alignment
+
+	.align	5
+__dabt_user:
+	user_entry
+
+#ifdef CONFIG_UNICORE_FPU_F64
+	cff	ip, s31
+	cand.a	ip, #0x08000000		@ FPU execption traps?
+	beq	209f
+
+	ldw	ip, [sp+], #S_PC
+	add	ip, ip, #4
+	stw	ip, [sp+], #S_PC
+	@
+	@ fall through to the emulation code, which returns using r19 if
+	@ it has emulated the instruction, or the more conventional lr
+	@ if we are to treat this as a real extended instruction
+	@
+	@  r0 - instruction
+	@
+1:	ldw.u	r0, [r2]
+	adr	r19, ret_from_exception
+	adr	lr, 209f
+	@
+	@ fallthrough to call do_uc_f64
+	@
+/*
+ * Check whether the instruction is a co-processor instruction.
+ * If yes, we need to call the relevant co-processor handler.
+ *
+ * Note that we don't do a full check here for the co-processor
+ * instructions; all instructions with bit 27 set are well
+ * defined.  The only instructions that should fault are the
+ * co-processor instructions.
+ *
+ * Emulators may wish to make use of the following registers:
+ *  r0  = instruction opcode.
+ *  r2  = PC
+ *  r19 = normal "successful" return address
+ *  r20 = this threads thread_info structure.
+ *  lr  = unrecognised instruction return address
+ */
+	get_thread_info r20			@ get current thread
+	and	r8, r0, #0x00003c00		@ mask out CP number
+	mov	r7, #1
+	stb	r7, [r20+], #TI_USED_CP + 2	@ set appropriate used_cp[]
+
+	@ F64 hardware support entry point.
+	@  r0  = faulted instruction
+	@  r19 = return address
+	@  r20 = fp_state
+	enable_irq r4
+	add	r20, r20, #TI_FPSTATE	@ r20 = workspace
+	cff	r1, s31			@ get fpu FPSCR
+	andn    r2, r1, #0x08000000
+	ctf     r2, s31			@ clear 27 bit
+	mov	r2, sp			@ nothing stacked - regdump is at TOS
+	mov	lr, r19			@ setup for a return to the user code
+
+	@ Now call the C code to package up the bounce to the support code
+	@   r0 holds the trigger instruction
+	@   r1 holds the FPSCR value
+	@   r2 pointer to register dump
+	b	ucf64_exchandler
+209:
+#endif
+	@
+	@ Call the processor-specific abort handler:
+	@
+	@  r2 - aborted context pc
+	@  r3 - aborted context asr
+	@
+	@ The abort handler must return the aborted address in r0, and
+	@ the fault status register in r1.
+	@
+	movc	r1, p0.c3, #0		@ get FSR
+	movc	r0, p0.c4, #0		@ get FAR
+
+	@
+	@ INTRs on, then call the main handler
+	@
+	enable_irq r2
+	mov	r2, sp
+	adr	lr, ret_from_exception
+	b	do_DataAbort
+ENDPROC(__dabt_user)
+
+	.align	5
+__intr_user:
+	user_entry
+
+	get_thread_info tsk
+
+	intr_handler
+
+	mov	why, #0
+	b	ret_to_user
+ENDPROC(__intr_user)
+
+	.ltorg
+
+	.align	5
+__extn_user:
+	user_entry
+
+	mov	r0, sp
+	mov	r1, asr
+	b	bad_mode
+ENDPROC(__extn_user)
+
+	.align	5
+__pabt_user:
+	user_entry
+
+	mov	r0, r2			@ pass address of aborted instruction.
+	mov	r1, #5
+	enable_irq r1			@ Enable interrupts
+	mov	r2, sp			@ regs
+	b.l	do_PrefetchAbort	@ call abort handler
+	/* fall through */
+/*
+ * This is the return code to user mode for abort handlers
+ */
+ENTRY(ret_from_exception)
+	get_thread_info tsk
+	mov	why, #0
+	b	ret_to_user
+ENDPROC(__pabt_user)
+ENDPROC(ret_from_exception)
+
+/*
+ * Register switch for UniCore V2 processors
+ * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
+ * previous and next are guaranteed not to be the same.
+ */
+ENTRY(__switch_to)
+	add	ip, r1, #TI_CPU_SAVE
+	stm.w	(r4 - r15), [ip]+
+	stm.w	(r16 - r27, sp, lr), [ip]+
+
+#ifdef	CONFIG_UNICORE_FPU_F64
+	add	ip, r1, #TI_FPSTATE
+	sfm.w	(f0  - f7 ), [ip]+
+	sfm.w	(f8  - f15), [ip]+
+	sfm.w	(f16 - f23), [ip]+
+	sfm.w	(f24 - f31), [ip]+
+	cff	r4, s31
+	stw	r4, [ip]
+
+	add	ip, r2, #TI_FPSTATE
+	lfm.w	(f0  - f7 ), [ip]+
+	lfm.w	(f8  - f15), [ip]+
+	lfm.w	(f16 - f23), [ip]+
+	lfm.w	(f24 - f31), [ip]+
+	ldw	r4, [ip]
+	ctf	r4, s31
+#endif
+	add	ip, r2, #TI_CPU_SAVE
+	ldm.w	(r4 - r15), [ip]+
+	ldm	(r16 - r27, sp, pc), [ip]+	@ Load all regs saved previously
+ENDPROC(__switch_to)
+
+	.align	5
+/*
+ * This is the fast syscall return path.  We do as little as
+ * possible here, and this includes saving r0 back into the PRIV
+ * stack.
+ */
+ret_fast_syscall:
+	disable_irq r1				@ disable interrupts
+	ldw	r1, [tsk+], #TI_FLAGS
+	cand.a	r1, #_TIF_WORK_MASK
+	bne	fast_work_pending
+
+	@ fast_restore_user_regs
+	restore_user_regs fast = 1, offset = S_OFF
+
+/*
+ * Ok, we need to do extra processing, enter the slow path.
+ */
+fast_work_pending:
+	stw.w	r0, [sp+], #S_R0+S_OFF		@ returned r0
+work_pending:
+	cand.a	r1, #_TIF_NEED_RESCHED
+	bne	work_resched
+	cand.a	r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
+	beq	no_work_pending
+	mov	r0, sp				@ 'regs'
+	mov	r2, why				@ 'syscall'
+	cand.a	r1, #_TIF_SIGPENDING		@ delivering a signal?
+	cmovne	why, #0				@ prevent further restarts
+	b.l	do_notify_resume
+	b	ret_slow_syscall		@ Check work again
+
+work_resched:
+	b.l	schedule
+/*
+ * "slow" syscall return path.  "why" tells us if this was a real syscall.
+ */
+ENTRY(ret_to_user)
+ret_slow_syscall:
+	disable_irq r1				@ disable interrupts
+	get_thread_info tsk			@ epip4d, one path error?!
+	ldw	r1, [tsk+], #TI_FLAGS
+	cand.a	r1, #_TIF_WORK_MASK
+	bne	work_pending
+no_work_pending:
+	@ slow_restore_user_regs
+	restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user)
+
+/*
+ * This is how we return from a fork.
+ */
+ENTRY(ret_from_fork)
+	b.l	schedule_tail
+	get_thread_info tsk
+	ldw	r1, [tsk+], #TI_FLAGS		@ check for syscall tracing
+	mov	why, #1
+	cand.a	r1, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
+	beq	ret_slow_syscall
+	mov	r1, sp
+	mov	r0, #1				@ trace exit [IP = 1]
+	b.l	syscall_trace
+	b	ret_slow_syscall
+ENDPROC(ret_from_fork)
+
+/*=============================================================================
+ * SWI handler
+ *-----------------------------------------------------------------------------
+ */
+	.align	5
+ENTRY(vector_swi)
+	sub	sp, sp, #S_FRAME_SIZE
+	stm	(r0 - r15), [sp]+		@ Calling r0 - r15
+	add	r8, sp, #S_R16
+	stm	(r16 - r28), [r8]+		@ Calling r16 - r28
+	add	r8, sp, #S_PC
+	stur	(sp, lr), [r8-]			@ Calling sp, lr
+	mov	r8, bsr				@ called from non-REAL mode
+	stw	lr, [sp+], #S_PC		@ Save calling PC
+	stw	r8, [sp+], #S_PSR		@ Save ASR
+	stw	r0, [sp+], #S_OLD_R0		@ Save OLD_R0
+	zero_fp
+
+	/*
+	 * Get the system call number.
+	 */
+	sub	ip, lr, #4
+	ldw.u	scno, [ip]			@ get SWI instruction
+
+#ifdef CONFIG_ALIGNMENT_TRAP
+	ldw	ip, __cr_alignment
+	ldw	ip, [ip]
+	movc	p0.c1, ip, #0                   @ update control register
+#endif
+	enable_irq ip
+
+	get_thread_info tsk
+	ldw	tbl, =sys_call_table		@ load syscall table pointer
+
+	andn	scno, scno, #0xff000000		@ mask off SWI op-code
+	andn	scno, scno, #0x00ff0000		@ mask off SWI op-code
+
+	stm.w	(r4, r5), [sp-]			@ push fifth and sixth args
+	ldw	ip, [tsk+], #TI_FLAGS		@ check for syscall tracing
+	cand.a	ip, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
+	bne	__sys_trace
+
+	csub.a	scno, #__NR_syscalls		@ check upper syscall limit
+	adr	lr, ret_fast_syscall		@ return address
+	bea	1f
+	ldw	pc, [tbl+], scno << #2		@ call sys_* routine
+1:
+	add	r1, sp, #S_OFF
+2:	mov	why, #0				@ no longer a real syscall
+	b	sys_ni_syscall			@ not private func
+
+	/*
+	 * This is the really slow path.  We're going to be doing
+	 * context switches, and waiting for our parent to respond.
+	 */
+__sys_trace:
+	mov	r2, scno
+	add	r1, sp, #S_OFF
+	mov	r0, #0				@ trace entry [IP = 0]
+	b.l	syscall_trace
+
+	adr	lr, __sys_trace_return		@ return address
+	mov	scno, r0			@ syscall number (possibly new)
+	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
+	csub.a	scno, #__NR_syscalls		@ check upper syscall limit
+	bea	2b
+	ldm	(r0 - r3), [r1]+		@ have to reload r0 - r3
+	ldw	pc, [tbl+], scno << #2		@ call sys_* routine
+
+__sys_trace_return:
+	stw.w	r0, [sp+], #S_R0 + S_OFF	@ save returned r0
+	mov	r2, scno
+	mov	r1, sp
+	mov	r0, #1				@ trace exit [IP = 1]
+	b.l	syscall_trace
+	b	ret_slow_syscall
+
+	.align	5
+#ifdef CONFIG_ALIGNMENT_TRAP
+	.type	__cr_alignment, #object
+__cr_alignment:
+	.word	cr_alignment
+#endif
+	.ltorg
+
+ENTRY(sys_execve)
+		add	r3, sp, #S_OFF
+		b	__sys_execve
+ENDPROC(sys_execve)
+
+ENTRY(sys_clone)
+		add	ip, sp, #S_OFF
+		stw	ip, [sp+], #4
+		b	__sys_clone
+ENDPROC(sys_clone)
+
+ENTRY(sys_rt_sigreturn)
+		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
+		b	__sys_rt_sigreturn
+ENDPROC(sys_rt_sigreturn)
+
+ENTRY(sys_sigaltstack)
+		ldw	r2, [sp+], #S_OFF + S_SP
+		b	do_sigaltstack
+ENDPROC(sys_sigaltstack)
+
+	__INIT
+
+/*
+ * Vector stubs.
+ *
+ * This code is copied to 0xffff0200 so we can use branches in the
+ * vectors, rather than ldr's.  Note that this code must not
+ * exceed 0x300 bytes.
+ *
+ * Common stub entry macro:
+ *   Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
+ */
+	.macro	vector_stub, name, mode
+	.align	5
+
+vector_\name:
+	@
+	@ Save r0, lr_<exception> (parent PC) and bsr_<exception>
+	@ (parent ASR)
+	@
+	stw	r0, [sp]
+	stw	lr, [sp+], #4		@ save r0, lr
+	mov	lr, bsr
+	stw	lr, [sp+], #8		@ save bsr
+
+	@
+	@ Prepare for PRIV mode.  INTRs remain disabled.
+	@
+	mov	r0, asr
+	xor	r0, r0, #(\mode ^ PRIV_MODE)
+	mov.a	bsr, r0
+
+	@
+	@ the branch table must immediately follow this code
+	@
+	and	lr, lr, #0x03
+	add	lr, lr, #1
+	mov	r0, sp
+	ldw	lr, [pc+], lr << #2
+	mov.a	pc, lr			@ branch to handler in PRIV mode
+ENDPROC(vector_\name)
+	.align	2
+	@ handler addresses follow this label
+	.endm
+
+	.globl	__stubs_start
+__stubs_start:
+/*
+ * Interrupt dispatcher
+ */
+	vector_stub	intr, INTR_MODE
+
+	.long	__intr_user			@  0  (USER)
+	.long	__invalid			@  1
+	.long	__invalid			@  2
+	.long	__intr_priv			@  3  (PRIV)
+
+/*
+ * Data abort dispatcher
+ * Enter in ABT mode, bsr = USER ASR, lr = USER PC
+ */
+	vector_stub	dabt, ABRT_MODE
+
+	.long	__dabt_user			@  0  (USER)
+	.long	__invalid			@  1
+	.long	__invalid			@  2  (INTR)
+	.long	__dabt_priv			@  3  (PRIV)
+
+/*
+ * Prefetch abort dispatcher
+ * Enter in ABT mode, bsr = USER ASR, lr = USER PC
+ */
+	vector_stub	pabt, ABRT_MODE
+
+	.long	__pabt_user			@  0 (USER)
+	.long	__invalid			@  1
+	.long	__invalid			@  2 (INTR)
+	.long	__pabt_priv			@  3 (PRIV)
+
+/*
+ * Undef instr entry dispatcher
+ * Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
+ */
+	vector_stub	extn, EXTN_MODE
+
+	.long	__extn_user			@  0 (USER)
+	.long	__invalid			@  1
+	.long	__invalid			@  2 (INTR)
+	.long	__extn_priv			@  3 (PRIV)
+
+/*
+ * We group all the following data together to optimise
+ * for CPUs with separate I & D caches.
+ */
+	.align	5
+
+.LCvswi:
+	.word	vector_swi
+
+	.globl	__stubs_end
+__stubs_end:
+
+	.equ	stubs_offset, __vectors_start + 0x200 - __stubs_start
+
+	.globl	__vectors_start
+__vectors_start:
+	jepriv	SYS_ERROR0
+	b	vector_extn + stubs_offset
+	ldw	pc, .LCvswi + stubs_offset
+	b	vector_pabt + stubs_offset
+	b	vector_dabt + stubs_offset
+	jepriv	SYS_ERROR0
+	b	vector_intr + stubs_offset
+	jepriv	SYS_ERROR0
+
+	.globl	__vectors_end
+__vectors_end:
+
+	.data
+
+	.globl	cr_alignment
+	.globl	cr_no_alignment
+cr_alignment:
+	.space	4
+cr_no_alignment:
+	.space	4
diff --git a/arch/unicore32/kernel/fpu-ucf64.c b/arch/unicore32/kernel/fpu-ucf64.c
new file mode 100644
index 00000000..282a60ac
--- /dev/null
+++ b/arch/unicore32/kernel/fpu-ucf64.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/unicore32/kernel/fpu-ucf64.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/fpu-ucf64.h>
+
+/*
+ * A special flag to tell the normalisation code not to normalise.
+ */
+#define F64_NAN_FLAG	0x100
+
+/*
+ * A bit pattern used to indicate the initial (unset) value of the
+ * exception mask, in case nothing handles an instruction.  This
+ * doesn't include the NAN flag, which get masked out before
+ * we check for an error.
+ */
+#define F64_EXCEPTION_ERROR	((u32)-1 & ~F64_NAN_FLAG)
+
+/*
+ * Since we aren't building with -mfpu=f64, we need to code
+ * these instructions using their MRC/MCR equivalents.
+ */
+#define f64reg(_f64_) #_f64_
+
+#define cff(_f64_) ({			\
+	u32 __v;			\
+	asm("cff %0, " f64reg(_f64_) "@ fmrx	%0, " #_f64_	\
+	    : "=r" (__v) : : "cc");	\
+	__v;				\
+	})
+
+#define ctf(_f64_, _var_)		\
+	asm("ctf %0, " f64reg(_f64_) "@ fmxr	" #_f64_ ", %0"	\
+	   : : "r" (_var_) : "cc")
+
+/*
+ * Raise a SIGFPE for the current process.
+ * sicode describes the signal being raised.
+ */
+void ucf64_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	memset(&info, 0, sizeof(info));
+
+	info.si_signo = SIGFPE;
+	info.si_code = sicode;
+	info.si_addr = (void __user *)(instruction_pointer(regs) - 4);
+
+	/*
+	 * This is the same as NWFPE, because it's not clear what
+	 * this is used for
+	 */
+	current->thread.error_code = 0;
+	current->thread.trap_no = 6;
+
+	send_sig_info(SIGFPE, &info, current);
+}
+
+/*
+ * Handle exceptions of UniCore-F64.
+ */
+void ucf64_exchandler(u32 inst, u32 fpexc, struct pt_regs *regs)
+{
+	u32 tmp = fpexc;
+	u32 exc = F64_EXCEPTION_ERROR & fpexc;
+
+	pr_debug("UniCore-F64: instruction %08x fpscr %08x\n",
+			inst, fpexc);
+
+	if (exc & FPSCR_CMPINSTR_BIT) {
+		if (exc & FPSCR_CON)
+			tmp |= FPSCR_CON;
+		else
+			tmp &= ~(FPSCR_CON);
+		exc &= ~(FPSCR_CMPINSTR_BIT | FPSCR_CON);
+	} else {
+		pr_debug(KERN_ERR "UniCore-F64 Error: unhandled exceptions\n");
+		pr_debug(KERN_ERR "UniCore-F64 FPSCR 0x%08x INST 0x%08x\n",
+				cff(FPSCR), inst);
+
+		ucf64_raise_sigfpe(0, regs);
+		return;
+	}
+
+	/*
+	 * Update the FPSCR with the additional exception flags.
+	 * Comparison instructions always return at least one of
+	 * these flags set.
+	 */
+	tmp &= ~(FPSCR_TRAP | FPSCR_IOS | FPSCR_OFS | FPSCR_UFS |
+			FPSCR_IXS | FPSCR_HIS | FPSCR_IOC | FPSCR_OFC |
+			FPSCR_UFC | FPSCR_IXC | FPSCR_HIC);
+
+	tmp |= exc;
+	ctf(FPSCR, tmp);
+}
+
+/*
+ * F64 support code initialisation.
+ */
+static int __init ucf64_init(void)
+{
+	ctf(FPSCR, 0x0);     /* FPSCR_UFE | FPSCR_NDE perhaps better */
+
+	printk(KERN_INFO "Enable UniCore-F64 support.\n");
+
+	return 0;
+}
+
+late_initcall(ucf64_init);
diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c
new file mode 100644
index 00000000..cb12ec39
--- /dev/null
+++ b/arch/unicore32/kernel/gpio.c
@@ -0,0 +1,122 @@
+/*
+ * linux/arch/unicore32/kernel/gpio.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/* in FPGA, no GPIO support */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_LEDS
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+static const struct gpio_led puv3_gpio_leds[] = {
+	{ .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
+		.default_trigger = "heartbeat",	},
+	{ .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
+		.default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data puv3_gpio_led_data = {
+	.num_leds =	ARRAY_SIZE(puv3_gpio_leds),
+	.leds =		(void *) puv3_gpio_leds,
+};
+
+static struct platform_device puv3_gpio_gpio_leds = {
+	.name =		"leds-gpio",
+	.id =		-1,
+	.dev = {
+		.platform_data = (void *) &puv3_gpio_led_data,
+	}
+};
+
+static int __init puv3_gpio_leds_init(void)
+{
+	platform_device_register(&puv3_gpio_gpio_leds);
+	return 0;
+}
+
+device_initcall(puv3_gpio_leds_init);
+#endif
+
+static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return readl(GPIO_GPLR) & GPIO_GPIO(offset);
+}
+
+static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		writel(GPIO_GPIO(offset), GPIO_GPSR);
+	else
+		writel(GPIO_GPIO(offset), GPIO_GPCR);
+}
+
+static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	puv3_gpio_set(chip, offset, value);
+	writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static struct gpio_chip puv3_gpio_chip = {
+	.label			= "gpio",
+	.direction_input	= puv3_direction_input,
+	.direction_output	= puv3_direction_output,
+	.set			= puv3_gpio_set,
+	.get			= puv3_gpio_get,
+	.base			= 0,
+	.ngpio			= GPIO_MAX + 1,
+};
+
+void __init puv3_init_gpio(void)
+{
+	writel(GPIO_DIR, GPIO_GPDR);
+#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)	\
+	|| defined(CONFIG_PUV3_DB0913)
+	gpio_set_value(GPO_WIFI_EN, 1);
+	gpio_set_value(GPO_HDD_LED, 1);
+	gpio_set_value(GPO_VGA_EN, 1);
+	gpio_set_value(GPO_LCD_EN, 1);
+	gpio_set_value(GPO_CAM_PWR_EN, 0);
+	gpio_set_value(GPO_LCD_VCC_EN, 1);
+	gpio_set_value(GPO_SOFT_OFF, 1);
+	gpio_set_value(GPO_BT_EN, 1);
+	gpio_set_value(GPO_FAN_ON, 0);
+	gpio_set_value(GPO_SPKR, 0);
+	gpio_set_value(GPO_CPU_HEALTH, 1);
+	gpio_set_value(GPO_LAN_SEL, 1);
+/*
+ * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
+ *	gpio_set_value(GPO_SET_V1, 1);
+ *	gpio_set_value(GPO_SET_V2, 1);
+ */
+#endif
+	gpiochip_add(&puv3_gpio_chip);
+}
diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S
new file mode 100644
index 00000000..e8f0b98c
--- /dev/null
+++ b/arch/unicore32/kernel/head.S
@@ -0,0 +1,252 @@
+/*
+ * linux/arch/unicore32/kernel/head.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/ptrace.h>
+#include <generated/asm-offsets.h>
+#include <asm/memory.h>
+#include <asm/thread_info.h>
+#include <asm/hwdef-copro.h>
+#include <asm/pgtable-hwdef.h>
+
+#if (PHYS_OFFSET & 0x003fffff)
+#error "PHYS_OFFSET must be at an even 4MiB boundary!"
+#endif
+
+#define KERNEL_RAM_VADDR	(PAGE_OFFSET + KERNEL_IMAGE_START)
+#define KERNEL_RAM_PADDR	(PHYS_OFFSET + KERNEL_IMAGE_START)
+
+#define KERNEL_PGD_PADDR	(KERNEL_RAM_PADDR - 0x1000)
+#define KERNEL_PGD_VADDR	(KERNEL_RAM_VADDR - 0x1000)
+
+#define KERNEL_START		KERNEL_RAM_VADDR
+#define KERNEL_END		_end
+
+/*
+ * swapper_pg_dir is the virtual address of the initial page table.
+ * We place the page tables 4K below KERNEL_RAM_VADDR.  Therefore, we must
+ * make sure that KERNEL_RAM_VADDR is correctly set.  Currently, we expect
+ * the least significant 16 bits to be 0x8000, but we could probably
+ * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000.
+ */
+#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
+#error KERNEL_RAM_VADDR must start at 0xXXXX8000
+#endif
+
+	.globl	swapper_pg_dir
+	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code.  The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care
+ *
+ * This code is mostly position independent, so if you link the kernel at
+ * 0xc0008000, you call this at __pa(0xc0008000).
+ */
+	__HEAD
+ENTRY(stext)
+	@ set asr
+	mov	r0, #PRIV_MODE			@ ensure priv mode
+	or	r0, #PSR_R_BIT | PSR_I_BIT	@ disable irqs
+	mov.a	asr, r0
+
+	@ process identify
+	movc	r0, p0.c0, #0			@ cpuid
+	movl	r1, 0xff00ffff			@ mask
+	movl	r2, 0x4d000863			@ value
+	and	r0, r1, r0
+	cxor.a	r0, r2
+	bne	__error_p			@ invalid processor id
+
+	/*
+	 * Clear the 4K level 1 swapper page table
+	 */
+	movl	r0, #KERNEL_PGD_PADDR		@ page table address
+	mov	r1, #0
+	add	r2, r0, #0x1000
+101:	stw.w	r1, [r0]+, #4
+	stw.w	r1, [r0]+, #4
+	stw.w	r1, [r0]+, #4
+	stw.w	r1, [r0]+, #4
+	cxor.a	r0, r2
+	bne	101b
+
+	movl	r4, #KERNEL_PGD_PADDR		@ page table address
+	mov	r7, #PMD_TYPE_SECT | PMD_PRESENT	@ page size: section
+	or	r7, r7, #PMD_SECT_CACHEABLE		@ cacheable
+	or	r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC
+
+	/*
+	 * Create identity mapping for first 4MB of kernel to
+	 * cater for the MMU enable.  This identity mapping
+	 * will be removed by paging_init().  We use our current program
+	 * counter to determine corresponding section base address.
+	 */
+	mov	r6, pc
+	mov	r6, r6 >> #22			@ start of kernel section
+	or	r1, r7, r6 << #22		@ flags + kernel base
+	stw	r1, [r4+], r6 << #2		@ identity mapping
+
+	/*
+	 * Now setup the pagetables for our kernel direct
+	 * mapped region.
+	 */
+	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 20
+	stw.w	r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20
+	movl	r6, #(KERNEL_END - 1)
+	add	r0, r0, #4
+	add	r6, r4, r6 >> #20
+102:	csub.a	r0, r6
+	add	r1, r1, #1 << 22
+	bua	103f
+	stw.w	r1, [r0]+, #4
+	b	102b
+103:
+	/*
+	 * Then map first 4MB of ram in case it contains our boot params.
+	 */
+	add	r0, r4, #PAGE_OFFSET >> 20
+	or	r6, r7, #(PHYS_OFFSET & 0xffc00000)
+	stw	r6, [r0]
+
+	ldw	r15, __switch_data		@ address to jump to after
+
+	/*
+	 * Initialise TLB, Caches, and MMU state ready to switch the MMU
+	 * on.
+	 */
+	mov	r0, #0
+	movc	p0.c5, r0, #28			@ cache invalidate all
+	nop8
+	movc	p0.c6, r0, #6			@ TLB invalidate all
+	nop8
+
+	/*
+	 * ..V. .... ..TB IDAM
+	 * ..1. .... ..01 1111
+	 */
+	movl	r0, #0x201f			@ control register setting
+
+	/*
+	 * Setup common bits before finally enabling the MMU.  Essentially
+	 * this is just loading the page table pointer and domain access
+	 * registers.
+	 */
+	#ifndef CONFIG_ALIGNMENT_TRAP
+		andn	r0, r0, #CR_A
+	#endif
+	#ifdef CONFIG_CPU_DCACHE_DISABLE
+		andn	r0, r0, #CR_D
+	#endif
+	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+		andn	r0, r0, #CR_B
+	#endif
+	#ifdef CONFIG_CPU_ICACHE_DISABLE
+		andn	r0, r0, #CR_I
+	#endif
+
+	movc	p0.c2, r4, #0			@ set pgd
+	b	__turn_mmu_on
+ENDPROC(stext)
+
+/*
+ * Enable the MMU.  This completely changes the structure of the visible
+ * memory space.  You will not be able to trace execution through this.
+ *
+ *  r0  = cp#0 control register
+ *  r15 = *virtual* address to jump to upon completion
+ */
+	.align	5
+__turn_mmu_on:
+	mov	r0, r0
+	movc	p0.c1, r0, #0			@ write control reg
+	nop					@ fetch inst by phys addr
+	mov	pc, r15
+	nop8					@ fetch inst by phys addr
+ENDPROC(__turn_mmu_on)
+
+/*
+ * Setup the initial page tables.  We only setup the barest
+ * amount which are required to get the kernel running, which
+ * generally means mapping in the kernel code.
+ *
+ * r9  = cpuid
+ * r10 = procinfo
+ *
+ * Returns:
+ *  r0, r3, r6, r7 corrupted
+ *  r4 = physical page table address
+ */
+	.ltorg
+
+	.align	2
+	.type	__switch_data, %object
+__switch_data:
+	.long	__mmap_switched
+	.long	__bss_start			@ r6
+	.long	_end				@ r7
+	.long	cr_alignment			@ r8
+	.long	init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ *  r0  = cp#0 control register
+ */
+__mmap_switched:
+	adr	r3, __switch_data + 4
+
+	ldm.w	(r6, r7, r8), [r3]+
+	ldw	sp, [r3]
+
+	mov	fp, #0				@ Clear BSS (and zero fp)
+203:	csub.a	r6, r7
+	bea	204f
+	stw.w	fp, [r6]+,#4
+	b	203b
+204:
+	andn	r1, r0, #CR_A			@ Clear 'A' bit
+	stm	(r0, r1), [r8]+			@ Save control register values
+	b	start_kernel
+ENDPROC(__mmap_switched)
+
+/*
+ * Exception handling.  Something went wrong and we can't proceed.  We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_p1
+	b.l	printascii
+	mov	r0, r9
+	b.l	printhex8
+	adr	r0, str_p2
+	b.l	printascii
+901:	nop8
+	b	901b
+str_p1:	.asciz	"\nError: unrecognized processor variant (0x"
+str_p2:	.asciz	").\n"
+	.align
+#endif
+ENDPROC(__error_p)
+
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
new file mode 100644
index 00000000..d75ef8b6
--- /dev/null
+++ b/arch/unicore32/kernel/hibernate.c
@@ -0,0 +1,159 @@
+/*
+ *  linux/arch/unicore32/kernel/hibernate.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/suspend.h>
+#include <linux/bootmem.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/suspend.h>
+
+#include "mach/pm.h"
+
+/* Pointer to the temporary resume page tables */
+pgd_t *resume_pg_dir;
+
+struct swsusp_arch_regs swsusp_arch_regs_cpu0;
+
+/*
+ * Create a middle page table on a resume-safe page and put a pointer to it in
+ * the given global directory entry.  This only returns the gd entry
+ * in non-PAE compilation mode, since the middle layer is folded.
+ */
+static pmd_t *resume_one_md_table_init(pgd_t *pgd)
+{
+	pud_t *pud;
+	pmd_t *pmd_table;
+
+	pud = pud_offset(pgd, 0);
+	pmd_table = pmd_offset(pud, 0);
+
+	return pmd_table;
+}
+
+/*
+ * Create a page table on a resume-safe page and place a pointer to it in
+ * a middle page directory entry.
+ */
+static pte_t *resume_one_page_table_init(pmd_t *pmd)
+{
+	if (pmd_none(*pmd)) {
+		pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC);
+		if (!page_table)
+			return NULL;
+
+		set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_KERNEL_TABLE));
+
+		BUG_ON(page_table != pte_offset_kernel(pmd, 0));
+
+		return page_table;
+	}
+
+	return pte_offset_kernel(pmd, 0);
+}
+
+/*
+ * This maps the physical memory to kernel virtual address space, a total
+ * of max_low_pfn pages, by creating page tables starting from address
+ * PAGE_OFFSET.  The page tables are allocated out of resume-safe pages.
+ */
+static int resume_physical_mapping_init(pgd_t *pgd_base)
+{
+	unsigned long pfn;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int pgd_idx, pmd_idx;
+
+	pgd_idx = pgd_index(PAGE_OFFSET);
+	pgd = pgd_base + pgd_idx;
+	pfn = 0;
+
+	for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
+		pmd = resume_one_md_table_init(pgd);
+		if (!pmd)
+			return -ENOMEM;
+
+		if (pfn >= max_low_pfn)
+			continue;
+
+		for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) {
+			pte_t *max_pte;
+
+			if (pfn >= max_low_pfn)
+				break;
+
+			/* Map with normal page tables.
+			 * NOTE: We can mark everything as executable here
+			 */
+			pte = resume_one_page_table_init(pmd);
+			if (!pte)
+				return -ENOMEM;
+
+			max_pte = pte + PTRS_PER_PTE;
+			for (; pte < max_pte; pte++, pfn++) {
+				if (pfn >= max_low_pfn)
+					break;
+
+				set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
+			}
+		}
+	}
+
+	return 0;
+}
+
+static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
+{
+}
+
+int swsusp_arch_resume(void)
+{
+	int error;
+
+	resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
+	if (!resume_pg_dir)
+		return -ENOMEM;
+
+	resume_init_first_level_page_table(resume_pg_dir);
+	error = resume_physical_mapping_init(resume_pg_dir);
+	if (error)
+		return error;
+
+	/* We have got enough memory and from now on we cannot recover */
+	restore_image(resume_pg_dir, restore_pblist);
+	return 0;
+}
+
+/*
+ *	pfn_is_nosave - check if given pfn is in the 'nosave' section
+ */
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+
+	return (pfn >= begin_pfn) && (pfn < end_pfn);
+}
+
+void save_processor_state(void)
+{
+}
+
+void restore_processor_state(void)
+{
+	local_flush_tlb_all();
+}
diff --git a/arch/unicore32/kernel/hibernate_asm.S b/arch/unicore32/kernel/hibernate_asm.S
new file mode 100644
index 00000000..cc3c6525
--- /dev/null
+++ b/arch/unicore32/kernel/hibernate_asm.S
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/unicore32/kernel/hibernate_asm.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <generated/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/assembler.h>
+
+@ restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist)
+@ r0: resume_pg_dir
+@ r1: restore_pblist
+@ copy restore_pblist pages
+@ restore registers from swsusp_arch_regs_cpu0
+@
+ENTRY(restore_image)
+	sub	r0, r0, #PAGE_OFFSET
+	mov	r5, #0
+	movc	p0.c6, r5, #6	@invalidate ITLB & DTLB
+	movc	p0.c2, r0, #0
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	.p2align 4,,7
+101:
+	csub.a	r1, #0
+	beq	109f
+
+	ldw	r6, [r1+], #PBE_ADDRESS
+	ldw	r7, [r1+], #PBE_ORIN_ADDRESS
+
+	movl	ip, #128
+102:	ldm.w	(r8 - r15), [r6]+
+	stm.w	(r8 - r15), [r7]+
+	sub.a	ip, ip, #1
+	bne	102b
+
+	ldw	r1, [r1+], #PBE_NEXT
+	b	101b
+
+	.p2align 4,,7
+109:
+	/* go back to the original page tables */
+	ldw	r0, =swapper_pg_dir
+	sub	r0, r0, #PAGE_OFFSET
+	mov	r5, #0
+	movc	p0.c6, r5, #6
+	movc	p0.c2, r0, #0
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+#ifdef	CONFIG_UNICORE_FPU_F64
+	ldw	ip, 1f
+	add	ip, ip, #SWSUSP_FPSTATE
+	lfm.w	(f0  - f7 ), [ip]+
+	lfm.w	(f8  - f15), [ip]+
+	lfm.w	(f16 - f23), [ip]+
+	lfm.w	(f24 - f31), [ip]+
+	ldw	r4, [ip]
+	ctf	r4, s31
+#endif
+	mov	r0, #0x0
+	ldw	ip, 1f
+	add	ip, ip, #SWSUSP_CPU
+	ldm.w	(r4 - r15), [ip]+
+	ldm	(r16 - r27, sp, pc), [ip]+	@ Load all regs saved previously
+
+	.align	2
+1:	.long	swsusp_arch_regs_cpu0
+
+
+@ swsusp_arch_suspend()
+@ - prepare pc for resume, return from function without swsusp_save on resume
+@ - save registers in swsusp_arch_regs_cpu0
+@ - call swsusp_save write suspend image
+
+ENTRY(swsusp_arch_suspend)
+	ldw	ip, 1f
+	add	ip, ip, #SWSUSP_CPU
+	stm.w	(r4 - r15), [ip]+
+	stm.w	(r16 - r27, sp, lr), [ip]+
+
+#ifdef	CONFIG_UNICORE_FPU_F64
+	ldw	ip, 1f
+	add	ip, ip, #SWSUSP_FPSTATE
+	sfm.w	(f0  - f7 ), [ip]+
+	sfm.w	(f8  - f15), [ip]+
+	sfm.w	(f16 - f23), [ip]+
+	sfm.w	(f24 - f31), [ip]+
+	cff	r4, s31
+	stw	r4, [ip]
+#endif
+	b	swsusp_save			@ no return
+
+1:	.long	swsusp_arch_regs_cpu0
diff --git a/arch/unicore32/kernel/init_task.c b/arch/unicore32/kernel/init_task.c
new file mode 100644
index 00000000..a35a1e50
--- /dev/null
+++ b/arch/unicore32/kernel/init_task.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/unicore32/kernel/init_task.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+#include <linux/uaccess.h>
+
+#include <asm/pgtable.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is 8192-byte aligned due to the
+ * way process stacks are handled. This is done by making sure
+ * the linker maps this in the .text segment right after head.S,
+ * and making head.S ensure the proper alignment.
+ *
+ * The things we do for performance..
+ */
+union thread_union init_thread_union __init_task_data = {
+	INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
new file mode 100644
index 00000000..0be5ccd7
--- /dev/null
+++ b/arch/unicore32/kernel/irq.c
@@ -0,0 +1,376 @@
+/*
+ * linux/arch/unicore32/kernel/irq.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/kallsyms.h>
+#include <linux/proc_fs.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#include "setup.h"
+
+/*
+ * PKUnity GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+static int GPIO_IRQ_mask = 0;
+
+#define GPIO_MASK(irq)		(1 << (irq - IRQ_GPIO0))
+
+static int puv3_gpio_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int mask;
+
+	if (d->irq < IRQ_GPIOHIGH)
+		mask = 1 << d->irq;
+	else
+		mask = GPIO_MASK(d->irq);
+
+	if (type == IRQ_TYPE_PROBE) {
+		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+			return 0;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		GPIO_IRQ_rising_edge |= mask;
+	else
+		GPIO_IRQ_rising_edge &= ~mask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		GPIO_IRQ_falling_edge |= mask;
+	else
+		GPIO_IRQ_falling_edge &= ~mask;
+
+	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
+	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
+
+	return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 7.
+ */
+static void puv3_low_gpio_ack(struct irq_data *d)
+{
+	writel((1 << d->irq), GPIO_GEDR);
+}
+
+static void puv3_low_gpio_mask(struct irq_data *d)
+{
+	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
+}
+
+static void puv3_low_gpio_unmask(struct irq_data *d)
+{
+	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
+}
+
+static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
+{
+	if (on)
+		writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
+	else
+		writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
+	return 0;
+}
+
+static struct irq_chip puv3_low_gpio_chip = {
+	.name		= "GPIO-low",
+	.irq_ack	= puv3_low_gpio_ack,
+	.irq_mask	= puv3_low_gpio_mask,
+	.irq_unmask	= puv3_low_gpio_unmask,
+	.irq_set_type	= puv3_gpio_type,
+	.irq_set_wake	= puv3_low_gpio_wake,
+};
+
+/*
+ * IRQ8 (GPIO0 through 27) handler.  We enter here with the
+ * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
+ * and call the handler.
+ */
+static void
+puv3_gpio_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int mask;
+
+	mask = readl(GPIO_GEDR);
+	do {
+		/*
+		 * clear down all currently active IRQ sources.
+		 * We will be processing them all.
+		 */
+		writel(mask, GPIO_GEDR);
+
+		irq = IRQ_GPIO0;
+		do {
+			if (mask & 1)
+				generic_handle_irq(irq);
+			mask >>= 1;
+			irq++;
+		} while (mask);
+		mask = readl(GPIO_GEDR);
+	} while (mask);
+}
+
+/*
+ * GPIO0-27 edge IRQs need to be handled specially.
+ * In addition, the IRQs are all collected up into one bit in the
+ * interrupt controller registers.
+ */
+static void puv3_high_gpio_ack(struct irq_data *d)
+{
+	unsigned int mask = GPIO_MASK(d->irq);
+
+	writel(mask, GPIO_GEDR);
+}
+
+static void puv3_high_gpio_mask(struct irq_data *d)
+{
+	unsigned int mask = GPIO_MASK(d->irq);
+
+	GPIO_IRQ_mask &= ~mask;
+
+	writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
+	writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
+}
+
+static void puv3_high_gpio_unmask(struct irq_data *d)
+{
+	unsigned int mask = GPIO_MASK(d->irq);
+
+	GPIO_IRQ_mask |= mask;
+
+	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
+	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
+}
+
+static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
+{
+	if (on)
+		writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
+	else
+		writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
+	return 0;
+}
+
+static struct irq_chip puv3_high_gpio_chip = {
+	.name		= "GPIO-high",
+	.irq_ack	= puv3_high_gpio_ack,
+	.irq_mask	= puv3_high_gpio_mask,
+	.irq_unmask	= puv3_high_gpio_unmask,
+	.irq_set_type	= puv3_gpio_type,
+	.irq_set_wake	= puv3_high_gpio_wake,
+};
+
+/*
+ * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
+ * this is for internal IRQs i.e. from 8 to 31.
+ */
+static void puv3_mask_irq(struct irq_data *d)
+{
+	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
+}
+
+static void puv3_unmask_irq(struct irq_data *d)
+{
+	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
+}
+
+/*
+ * Apart form GPIOs, only the RTC alarm can be a wakeup event.
+ */
+static int puv3_set_wake(struct irq_data *d, unsigned int on)
+{
+	if (d->irq == IRQ_RTCAlarm) {
+		if (on)
+			writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
+		else
+			writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static struct irq_chip puv3_normal_chip = {
+	.name		= "PKUnity-v3",
+	.irq_ack	= puv3_mask_irq,
+	.irq_mask	= puv3_mask_irq,
+	.irq_unmask	= puv3_unmask_irq,
+	.irq_set_wake	= puv3_set_wake,
+};
+
+static struct resource irq_resource = {
+	.name	= "irqs",
+	.start	= io_v2p(PKUNITY_INTC_BASE),
+	.end	= io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
+};
+
+static struct puv3_irq_state {
+	unsigned int	saved;
+	unsigned int	icmr;
+	unsigned int	iclr;
+	unsigned int	iccr;
+} puv3_irq_state;
+
+static int puv3_irq_suspend(void)
+{
+	struct puv3_irq_state *st = &puv3_irq_state;
+
+	st->saved = 1;
+	st->icmr = readl(INTC_ICMR);
+	st->iclr = readl(INTC_ICLR);
+	st->iccr = readl(INTC_ICCR);
+
+	/*
+	 * Disable all GPIO-based interrupts.
+	 */
+	writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
+
+	/*
+	 * Set the appropriate edges for wakeup.
+	 */
+	writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
+	writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
+
+	/*
+	 * Clear any pending GPIO interrupts.
+	 */
+	writel(readl(GPIO_GEDR), GPIO_GEDR);
+
+	return 0;
+}
+
+static void puv3_irq_resume(void)
+{
+	struct puv3_irq_state *st = &puv3_irq_state;
+
+	if (st->saved) {
+		writel(st->iccr, INTC_ICCR);
+		writel(st->iclr, INTC_ICLR);
+
+		writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
+		writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
+
+		writel(st->icmr, INTC_ICMR);
+	}
+}
+
+static struct syscore_ops puv3_irq_syscore_ops = {
+	.suspend	= puv3_irq_suspend,
+	.resume		= puv3_irq_resume,
+};
+
+static int __init puv3_irq_init_syscore(void)
+{
+	register_syscore_ops(&puv3_irq_syscore_ops);
+	return 0;
+}
+
+device_initcall(puv3_irq_init_syscore);
+
+void __init init_IRQ(void)
+{
+	unsigned int irq;
+
+	request_resource(&iomem_resource, &irq_resource);
+
+	/* disable all IRQs */
+	writel(0, INTC_ICMR);
+
+	/* all IRQs are IRQ, not REAL */
+	writel(0, INTC_ICLR);
+
+	/* clear all GPIO edge detects */
+	writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
+	writel(0, GPIO_GFER);
+	writel(0, GPIO_GRER);
+	writel(0x0FFFFFFF, GPIO_GEDR);
+
+	writel(1, INTC_ICCR);
+
+	for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
+		irq_set_chip(irq, &puv3_low_gpio_chip);
+		irq_set_handler(irq, handle_edge_irq);
+		irq_modify_status(irq,
+			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
+			0);
+	}
+
+	for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
+		irq_set_chip(irq, &puv3_normal_chip);
+		irq_set_handler(irq, handle_level_irq);
+		irq_modify_status(irq,
+			IRQ_NOREQUEST | IRQ_NOAUTOEN,
+			IRQ_NOPROBE);
+	}
+
+	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
+		irq_set_chip(irq, &puv3_high_gpio_chip);
+		irq_set_handler(irq, handle_edge_irq);
+		irq_modify_status(irq,
+			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
+			0);
+	}
+
+	/*
+	 * Install handler for GPIO 0-27 edge detect interrupts
+	 */
+	irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
+	irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
+
+#ifdef CONFIG_PUV3_GPIO
+	puv3_init_gpio();
+#endif
+}
+
+/*
+ * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
+ * come via this function.  Instead, they should provide their
+ * own 'handler'
+ */
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	irq_enter();
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (unlikely(irq >= nr_irqs)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
+		generic_handle_irq(irq);
+	}
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
new file mode 100644
index 00000000..d285d71c
--- /dev/null
+++ b/arch/unicore32/kernel/ksyms.c
@@ -0,0 +1,98 @@
+/*
+ * linux/arch/unicore32/kernel/ksyms.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <asm/checksum.h>
+
+#include "ksyms.h"
+
+EXPORT_SYMBOL(find_next_zero_bit);
+EXPORT_SYMBOL(find_next_bit);
+
+EXPORT_SYMBOL(__backtrace);
+
+	/* platform dependent support */
+EXPORT_SYMBOL(__udelay);
+EXPORT_SYMBOL(__const_udelay);
+
+	/* networking */
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_ipv6_magic);
+
+	/* io */
+#ifndef __raw_readsb
+EXPORT_SYMBOL(__raw_readsb);
+#endif
+#ifndef __raw_readsw
+EXPORT_SYMBOL(__raw_readsw);
+#endif
+#ifndef __raw_readsl
+EXPORT_SYMBOL(__raw_readsl);
+#endif
+#ifndef __raw_writesb
+EXPORT_SYMBOL(__raw_writesb);
+#endif
+#ifndef __raw_writesw
+EXPORT_SYMBOL(__raw_writesw);
+#endif
+#ifndef __raw_writesl
+EXPORT_SYMBOL(__raw_writesl);
+#endif
+
+	/* string / mem functions */
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+
+	/* user mem (segment) */
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+
+EXPORT_SYMBOL(copy_page);
+
+EXPORT_SYMBOL(__copy_from_user);
+EXPORT_SYMBOL(__copy_to_user);
+EXPORT_SYMBOL(__clear_user);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__bswapsi2);
+
diff --git a/arch/unicore32/kernel/ksyms.h b/arch/unicore32/kernel/ksyms.h
new file mode 100644
index 00000000..185cdc71
--- /dev/null
+++ b/arch/unicore32/kernel/ksyms.h
@@ -0,0 +1,15 @@
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler...  (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __bswapsi2(void);
diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c
new file mode 100644
index 00000000..8fbe8577
--- /dev/null
+++ b/arch/unicore32/kernel/module.c
@@ -0,0 +1,117 @@
+/*
+ * linux/arch/unicore32/kernel/module.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/gfp.h>
+
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+void *module_alloc(unsigned long size)
+{
+	struct vm_struct *area;
+
+	size = PAGE_ALIGN(size);
+	if (!size)
+		return NULL;
+
+	area = __get_vm_area(size, VM_ALLOC, MODULES_VADDR, MODULES_END);
+	if (!area)
+		return NULL;
+
+	return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
+}
+
+int
+apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
+	       unsigned int relindex, struct module *module)
+{
+	Elf32_Shdr *symsec = sechdrs + symindex;
+	Elf32_Shdr *relsec = sechdrs + relindex;
+	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
+	Elf32_Rel *rel = (void *)relsec->sh_addr;
+	unsigned int i;
+
+	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
+		unsigned long loc;
+		Elf32_Sym *sym;
+		s32 offset;
+
+		offset = ELF32_R_SYM(rel->r_info);
+		if (offset < 0 || offset >
+				(symsec->sh_size / sizeof(Elf32_Sym))) {
+			printk(KERN_ERR "%s: bad relocation, "
+					"section %d reloc %d\n",
+					module->name, relindex, i);
+			return -ENOEXEC;
+		}
+
+		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+
+		if (rel->r_offset < 0 || rel->r_offset >
+				dstsec->sh_size - sizeof(u32)) {
+			printk(KERN_ERR "%s: out of bounds relocation, "
+				"section %d reloc %d offset %d size %d\n",
+				module->name, relindex, i, rel->r_offset,
+				dstsec->sh_size);
+			return -ENOEXEC;
+		}
+
+		loc = dstsec->sh_addr + rel->r_offset;
+
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_UNICORE_NONE:
+			/* ignore */
+			break;
+
+		case R_UNICORE_ABS32:
+			*(u32 *)loc += sym->st_value;
+			break;
+
+		case R_UNICORE_PC24:
+		case R_UNICORE_CALL:
+		case R_UNICORE_JUMP24:
+			offset = (*(u32 *)loc & 0x00ffffff) << 2;
+			if (offset & 0x02000000)
+				offset -= 0x04000000;
+
+			offset += sym->st_value - loc;
+			if (offset & 3 ||
+			    offset <= (s32)0xfe000000 ||
+			    offset >= (s32)0x02000000) {
+				printk(KERN_ERR
+				       "%s: relocation out of range, section "
+				       "%d reloc %d sym '%s'\n", module->name,
+				       relindex, i, strtab + sym->st_name);
+				return -ENOEXEC;
+			}
+
+			offset >>= 2;
+
+			*(u32 *)loc &= 0xff000000;
+			*(u32 *)loc |= offset & 0x00ffffff;
+			break;
+
+		default:
+			printk(KERN_ERR "%s: unknown relocation: %u\n",
+			       module->name, ELF32_R_TYPE(rel->r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
new file mode 100644
index 00000000..2fc2b1ba
--- /dev/null
+++ b/arch/unicore32/kernel/pci.c
@@ -0,0 +1,408 @@
+/*
+ * linux/arch/unicore32/kernel/pci.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  PCI bios-type initialisation for PCI machines
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+static int debug_pci;
+
+#define CONFIG_CMD(bus, devfn, where)	\
+	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+static int
+puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+			int size, u32 *value)
+{
+	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
+	switch (size) {
+	case 1:
+		*value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
+		break;
+	case 2:
+		*value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
+		break;
+	case 4:
+		*value = readl(PCICFG_DATA);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+			int size, u32 value)
+{
+	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
+	switch (size) {
+	case 1:
+		writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
+			| FIELD(value, 8, (where&3)*8), PCICFG_DATA);
+		break;
+	case 2:
+		writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
+			| FIELD(value, 16, (where&2)*8), PCICFG_DATA);
+		break;
+	case 4:
+		writel(value, PCICFG_DATA);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops pci_puv3_ops = {
+	.read  = puv3_read_config,
+	.write = puv3_write_config,
+};
+
+void pci_puv3_preinit(void)
+{
+	printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
+	/* config PCI bridge base */
+	writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
+
+	writel(0, PCIBRI_AHBCTL0);
+	writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
+	writel(0xFFFF0000, PCIBRI_AHBAMR0);
+	writel(0, PCIBRI_AHBTAR0);
+
+	writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
+	writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
+	writel(0xFFFF0000, PCIBRI_AHBAMR1);
+	writel(0x00000000, PCIBRI_AHBTAR1);
+
+	writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
+	writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
+	writel(0xF8000000, PCIBRI_AHBAMR2);
+	writel(0, PCIBRI_AHBTAR2);
+
+	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
+
+	writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
+	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
+	writel(0xF8000000, PCIBRI_PCIAMR0);
+	writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
+
+	writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
+}
+
+static int __init pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (dev->bus->number == 0) {
+#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
+		if      (dev->devfn == 0x00)
+			return IRQ_PCIINTA;
+		else if (dev->devfn == 0x08)
+			return IRQ_PCIINTB;
+		else if (dev->devfn == 0x10)
+			return IRQ_PCIINTC;
+		else if (dev->devfn == 0x18)
+			return IRQ_PCIINTD;
+#endif
+#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
+		if      (dev->devfn == 0x30)
+			return IRQ_PCIINTB;
+		else if (dev->devfn == 0x60)
+			return IRQ_PCIINTC;
+		else if (dev->devfn == 0x58)
+			return IRQ_PCIINTD;
+#endif
+#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
+		/* only support 2 pci devices */
+		if      (dev->devfn == 0x00)
+			return IRQ_PCIINTC; /* sata */
+#endif
+	}
+	return -1;
+}
+
+/*
+ * Only first 128MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init puv3_pci_adjust_zones(unsigned long *zone_size,
+	unsigned long *zhole_size)
+{
+	unsigned int sz = SZ_128M >> PAGE_SHIFT;
+
+	/*
+	 * Only adjust if > 128M on current system
+	 */
+	if (zone_size[0] <= sz)
+		return;
+
+	zone_size[1] = zone_size[0] - sz;
+	zone_size[0] = sz;
+	zhole_size[1] = zhole_size[0];
+	zhole_size[0] = 0;
+}
+
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	if (debug_pci)
+		printk(KERN_DEBUG "PCI: Assigning IRQ %02d to %s\n",
+				irq, pci_name(dev));
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * If the bus contains any of these devices, then we must not turn on
+ * parity checking of any kind.
+ */
+static inline int pdev_bad_for_parity(struct pci_dev *dev)
+{
+	return 0;
+}
+
+/*
+ * pcibios_fixup_bus - Called after each bus is probed,
+ * but before its children are examined.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	u16 features = PCI_COMMAND_SERR
+		| PCI_COMMAND_PARITY
+		| PCI_COMMAND_FAST_BACK;
+
+	bus->resource[0] = &ioport_resource;
+	bus->resource[1] = &iomem_resource;
+
+	/*
+	 * Walk the devices on this bus, working out what we can
+	 * and can't support.
+	 */
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		u16 status;
+
+		pci_read_config_word(dev, PCI_STATUS, &status);
+
+		/*
+		 * If any device on this bus does not support fast back
+		 * to back transfers, then the bus as a whole is not able
+		 * to support them.  Having fast back to back transfers
+		 * on saves us one PCI cycle per transaction.
+		 */
+		if (!(status & PCI_STATUS_FAST_BACK))
+			features &= ~PCI_COMMAND_FAST_BACK;
+
+		if (pdev_bad_for_parity(dev))
+			features &= ~(PCI_COMMAND_SERR
+					| PCI_COMMAND_PARITY);
+
+		switch (dev->class >> 8) {
+		case PCI_CLASS_BRIDGE_PCI:
+			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
+			status |= PCI_BRIDGE_CTL_PARITY
+				| PCI_BRIDGE_CTL_MASTER_ABORT;
+			status &= ~(PCI_BRIDGE_CTL_BUS_RESET
+				| PCI_BRIDGE_CTL_FAST_BACK);
+			pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
+			break;
+
+		case PCI_CLASS_BRIDGE_CARDBUS:
+			pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+					&status);
+			status |= PCI_CB_BRIDGE_CTL_PARITY
+				| PCI_CB_BRIDGE_CTL_MASTER_ABORT;
+			pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
+					status);
+			break;
+		}
+	}
+
+	/*
+	 * Now walk the devices again, this time setting them up.
+	 */
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		u16 cmd;
+
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		cmd |= features;
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
+				      L1_CACHE_BYTES >> 2);
+	}
+
+	/*
+	 * Propagate the flags to the PCI bridge.
+	 */
+	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		if (features & PCI_COMMAND_FAST_BACK)
+			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
+		if (features & PCI_COMMAND_PARITY)
+			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
+	}
+
+	/*
+	 * Report what we did for this bus
+	 */
+	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
+		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
+}
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_fixup_bus);
+#endif
+
+static int __init pci_common_init(void)
+{
+	struct pci_bus *puv3_bus;
+
+	pci_puv3_preinit();
+
+	puv3_bus = pci_scan_bus(0, &pci_puv3_ops, NULL);
+
+	if (!puv3_bus)
+		panic("PCI: unable to scan bus!");
+
+	pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq);
+
+	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+		/*
+		 * Size the bridge windows.
+		 */
+		pci_bus_size_bridges(puv3_bus);
+
+		/*
+		 * Assign resources.
+		 */
+		pci_bus_assign_resources(puv3_bus);
+	}
+
+	/*
+	 * Tell drivers about devices found.
+	 */
+	pci_bus_add_devices(puv3_bus);
+
+	return 0;
+}
+subsys_initcall(pci_common_init);
+
+char * __devinit pcibios_setup(char *str)
+{
+	if (!strcmp(str, "debug")) {
+		debug_pci = 1;
+		return NULL;
+	} else if (!strcmp(str, "firmware")) {
+		pci_add_flags(PCI_PROBE_ONLY);
+		return NULL;
+	}
+	return str;
+}
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO && start & 0x300)
+		start = (start + 0x3ff) & ~0x3ff;
+
+	start = (start + align - 1) & ~(align - 1);
+
+	return start;
+}
+
+/**
+ * pcibios_enable_device - Enable I/O and memory.
+ * @dev: PCI device to be enabled
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	int idx;
+	struct resource *r;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	for (idx = 0; idx < 6; idx++) {
+		/* Only set up the requested stuff */
+		if (!(mask & (1 << idx)))
+			continue;
+
+		r = dev->resource + idx;
+		if (!r->start && r->end) {
+			printk(KERN_ERR "PCI: Device %s not available because"
+			       " of resource collisions\n", pci_name(dev));
+			return -EINVAL;
+		}
+		if (r->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (r->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+
+	/*
+	 * Bridges (eg, cardbus bridges) need to be fully enabled
+	 */
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+	if (cmd != old_cmd) {
+		printk("PCI: enabling device %s (%04x -> %04x)\n",
+		       pci_name(dev), old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
+	return 0;
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long phys;
+
+	if (mmap_state == pci_mmap_io)
+		return -EINVAL;
+
+	phys = vma->vm_pgoff;
+
+	/*
+	 * Mark this as IO
+	 */
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (remap_pfn_range(vma, vma->vm_start, phys,
+			     vma->vm_end - vma->vm_start,
+			     vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
diff --git a/arch/unicore32/kernel/pm.c b/arch/unicore32/kernel/pm.c
new file mode 100644
index 00000000..784bc2db
--- /dev/null
+++ b/arch/unicore32/kernel/pm.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/unicore32/kernel/pm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/pm.h>
+
+#include "setup.h"
+
+struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
+static unsigned long *sleep_save;
+
+int puv3_pm_enter(suspend_state_t state)
+{
+	unsigned long sleep_save_checksum = 0, checksum = 0;
+	int i;
+
+	/* skip registers saving for standby */
+	if (state != PM_SUSPEND_STANDBY) {
+		puv3_cpu_pm_fns->save(sleep_save);
+		/* before sleeping, calculate and save a checksum */
+		for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
+			sleep_save_checksum += sleep_save[i];
+	}
+
+	/* *** go zzz *** */
+	puv3_cpu_pm_fns->enter(state);
+	cpu_init();
+#ifdef CONFIG_INPUT_KEYBOARD
+	puv3_ps2_init();
+#endif
+#ifdef CONFIG_PCI
+	pci_puv3_preinit();
+#endif
+	if (state != PM_SUSPEND_STANDBY) {
+		/* after sleeping, validate the checksum */
+		for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
+			checksum += sleep_save[i];
+
+		/* if invalid, display message and wait for a hardware reset */
+		if (checksum != sleep_save_checksum) {
+			while (1)
+				puv3_cpu_pm_fns->enter(state);
+		}
+		puv3_cpu_pm_fns->restore(sleep_save);
+	}
+
+	pr_debug("*** made it back from resume\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(puv3_pm_enter);
+
+unsigned long sleep_phys_sp(void *sp)
+{
+	return virt_to_phys(sp);
+}
+
+static int puv3_pm_valid(suspend_state_t state)
+{
+	if (puv3_cpu_pm_fns)
+		return puv3_cpu_pm_fns->valid(state);
+
+	return -EINVAL;
+}
+
+static int puv3_pm_prepare(void)
+{
+	int ret = 0;
+
+	if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare)
+		ret = puv3_cpu_pm_fns->prepare();
+
+	return ret;
+}
+
+static void puv3_pm_finish(void)
+{
+	if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish)
+		puv3_cpu_pm_fns->finish();
+}
+
+static struct platform_suspend_ops puv3_pm_ops = {
+	.valid		= puv3_pm_valid,
+	.enter		= puv3_pm_enter,
+	.prepare	= puv3_pm_prepare,
+	.finish		= puv3_pm_finish,
+};
+
+static int __init puv3_pm_init(void)
+{
+	if (!puv3_cpu_pm_fns) {
+		printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n");
+		return -EINVAL;
+	}
+
+	sleep_save = kmalloc(puv3_cpu_pm_fns->save_count
+				* sizeof(unsigned long), GFP_KERNEL);
+	if (!sleep_save) {
+		printk(KERN_ERR "failed to alloc memory for pm save\n");
+		return -ENOMEM;
+	}
+
+	suspend_set_ops(&puv3_pm_ops);
+	return 0;
+}
+
+device_initcall(puv3_pm_init);
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
new file mode 100644
index 00000000..b6f0458c
--- /dev/null
+++ b/arch/unicore32/kernel/process.c
@@ -0,0 +1,390 @@
+/*
+ * linux/arch/unicore32/kernel/process.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <stdarg.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/elfcore.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/utsname.h>
+#include <linux/uaccess.h>
+#include <linux/random.h>
+#include <linux/gpio.h>
+#include <linux/stacktrace.h>
+
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/stacktrace.h>
+
+#include "setup.h"
+
+static const char * const processor_modes[] = {
+	"UK00", "UK01", "UK02", "UK03", "UK04", "UK05", "UK06", "UK07",
+	"UK08", "UK09", "UK0A", "UK0B", "UK0C", "UK0D", "UK0E", "UK0F",
+	"USER", "REAL", "INTR", "PRIV", "UK14", "UK15", "UK16", "ABRT",
+	"UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR"
+};
+
+/*
+ * The idle thread, has rather strange semantics for calling pm_idle,
+ * but this is what x86 does and we need to do the same, so that
+ * things like cpuidle get called in the same way.
+ */
+void cpu_idle(void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		tick_nohz_idle_enter();
+		rcu_idle_enter();
+		while (!need_resched()) {
+			local_irq_disable();
+			stop_critical_timings();
+			cpu_do_idle();
+			local_irq_enable();
+			start_critical_timings();
+		}
+		rcu_idle_exit();
+		tick_nohz_idle_exit();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
+}
+
+static char reboot_mode = 'h';
+
+int __init reboot_setup(char *str)
+{
+	reboot_mode = str[0];
+	return 1;
+}
+
+__setup("reboot=", reboot_setup);
+
+void machine_halt(void)
+{
+	gpio_set_value(GPO_SOFT_OFF, 0);
+}
+
+/*
+ * Function pointers to optional machine specific functions
+ */
+void (*pm_power_off)(void) = NULL;
+
+void machine_power_off(void)
+{
+	if (pm_power_off)
+		pm_power_off();
+	machine_halt();
+}
+
+void machine_restart(char *cmd)
+{
+	/* Disable interrupts first */
+	local_irq_disable();
+
+	/*
+	 * Tell the mm system that we are going to reboot -
+	 * we may need it to insert some 1:1 mappings so that
+	 * soft boot works.
+	 */
+	setup_mm_for_reboot(reboot_mode);
+
+	/* Clean and invalidate caches */
+	flush_cache_all();
+
+	/* Turn off caching */
+	cpu_proc_fin();
+
+	/* Push out any further dirty data, and ensure cache is empty */
+	flush_cache_all();
+
+	/*
+	 * Now handle reboot code.
+	 */
+	if (reboot_mode == 's') {
+		/* Jump into ROM at address 0xffff0000 */
+		cpu_reset(VECTORS_BASE);
+	} else {
+		writel(0x00002001, PM_PLLSYSCFG); /* cpu clk = 250M */
+		writel(0x00100800, PM_PLLDDRCFG); /* ddr clk =  44M */
+		writel(0x00002001, PM_PLLVGACFG); /* vga clk = 250M */
+
+		/* Use on-chip reset capability */
+		/* following instructions must be in one icache line */
+		__asm__ __volatile__(
+			"	.align 5\n\t"
+			"	stw	%1, [%0]\n\t"
+			"201:	ldw	r0, [%0]\n\t"
+			"	cmpsub.a	r0, #0\n\t"
+			"	bne	201b\n\t"
+			"	stw	%3, [%2]\n\t"
+			"	nop; nop; nop\n\t"
+			/* prefetch 3 instructions at most */
+			:
+			: "r" (PM_PMCR),
+			  "r" (PM_PMCR_CFBSYS | PM_PMCR_CFBDDR
+				| PM_PMCR_CFBVGA),
+			  "r" (RESETC_SWRR),
+			  "r" (RESETC_SWRR_SRB)
+			: "r0", "memory");
+	}
+
+	/*
+	 * Whoops - the architecture was unable to reboot.
+	 * Tell the user!
+	 */
+	mdelay(1000);
+	printk(KERN_EMERG "Reboot failed -- System halted\n");
+	do { } while (1);
+}
+
+void __show_regs(struct pt_regs *regs)
+{
+	unsigned long flags;
+	char buf[64];
+
+	printk(KERN_DEFAULT "CPU: %d    %s  (%s %.*s)\n",
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
+		(int)strcspn(init_utsname()->version, " "),
+		init_utsname()->version);
+	print_symbol("PC is at %s\n", instruction_pointer(regs));
+	print_symbol("LR is at %s\n", regs->UCreg_lr);
+	printk(KERN_DEFAULT "pc : [<%08lx>]    lr : [<%08lx>]    psr: %08lx\n"
+	       "sp : %08lx  ip : %08lx  fp : %08lx\n",
+		regs->UCreg_pc, regs->UCreg_lr, regs->UCreg_asr,
+		regs->UCreg_sp, regs->UCreg_ip, regs->UCreg_fp);
+	printk(KERN_DEFAULT "r26: %08lx  r25: %08lx  r24: %08lx\n",
+		regs->UCreg_26, regs->UCreg_25,
+		regs->UCreg_24);
+	printk(KERN_DEFAULT "r23: %08lx  r22: %08lx  r21: %08lx  r20: %08lx\n",
+		regs->UCreg_23, regs->UCreg_22,
+		regs->UCreg_21, regs->UCreg_20);
+	printk(KERN_DEFAULT "r19: %08lx  r18: %08lx  r17: %08lx  r16: %08lx\n",
+		regs->UCreg_19, regs->UCreg_18,
+		regs->UCreg_17, regs->UCreg_16);
+	printk(KERN_DEFAULT "r15: %08lx  r14: %08lx  r13: %08lx  r12: %08lx\n",
+		regs->UCreg_15, regs->UCreg_14,
+		regs->UCreg_13, regs->UCreg_12);
+	printk(KERN_DEFAULT "r11: %08lx  r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+		regs->UCreg_11, regs->UCreg_10,
+		regs->UCreg_09, regs->UCreg_08);
+	printk(KERN_DEFAULT "r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+		regs->UCreg_07, regs->UCreg_06,
+		regs->UCreg_05, regs->UCreg_04);
+	printk(KERN_DEFAULT "r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+		regs->UCreg_03, regs->UCreg_02,
+		regs->UCreg_01, regs->UCreg_00);
+
+	flags = regs->UCreg_asr;
+	buf[0] = flags & PSR_S_BIT ? 'S' : 's';
+	buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
+	buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
+	buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
+	buf[4] = '\0';
+
+	printk(KERN_DEFAULT "Flags: %s  INTR o%s  REAL o%s  Mode %s  Segment %s\n",
+		buf, interrupts_enabled(regs) ? "n" : "ff",
+		fast_interrupts_enabled(regs) ? "n" : "ff",
+		processor_modes[processor_mode(regs)],
+		segment_eq(get_fs(), get_ds()) ? "kernel" : "user");
+	{
+		unsigned int ctrl;
+
+		buf[0] = '\0';
+		{
+			unsigned int transbase;
+			asm("movc %0, p0.c2, #0\n"
+			    : "=r" (transbase));
+			snprintf(buf, sizeof(buf), "  Table: %08x", transbase);
+		}
+		asm("movc %0, p0.c1, #0\n" : "=r" (ctrl));
+
+		printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf);
+	}
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	printk(KERN_DEFAULT "\n");
+	printk(KERN_DEFAULT "Pid: %d, comm: %20s\n",
+			task_pid_nr(current), current->comm);
+	__show_regs(regs);
+	__backtrace();
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+}
+
+void flush_thread(void)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = current;
+
+	memset(thread->used_cp, 0, sizeof(thread->used_cp));
+	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
+#ifdef CONFIG_UNICORE_FPU_F64
+	memset(&thread->fpstate, 0, sizeof(struct fp_state));
+#endif
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+
+int
+copy_thread(unsigned long clone_flags, unsigned long stack_start,
+	    unsigned long stk_sz, struct task_struct *p, struct pt_regs *regs)
+{
+	struct thread_info *thread = task_thread_info(p);
+	struct pt_regs *childregs = task_pt_regs(p);
+
+	*childregs = *regs;
+	childregs->UCreg_00 = 0;
+	childregs->UCreg_sp = stack_start;
+
+	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
+	thread->cpu_context.sp = (unsigned long)childregs;
+	thread->cpu_context.pc = (unsigned long)ret_from_fork;
+
+	if (clone_flags & CLONE_SETTLS)
+		childregs->UCreg_16 = regs->UCreg_03;
+
+	return 0;
+}
+
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+	return 1;
+}
+
+/*
+ * fill in the fpe structure for a core dump...
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp)
+{
+	struct thread_info *thread = current_thread_info();
+	int used_math = thread->used_cp[1] | thread->used_cp[2];
+
+#ifdef CONFIG_UNICORE_FPU_F64
+	if (used_math)
+		memcpy(fp, &thread->fpstate, sizeof(*fp));
+#endif
+	return used_math != 0;
+}
+EXPORT_SYMBOL(dump_fpu);
+
+/*
+ * Shuffle the argument into the correct register before calling the
+ * thread function.  r1 is the thread argument, r2 is the pointer to
+ * the thread function, and r3 points to the exit function.
+ */
+asm(".pushsection .text\n"
+"	.align\n"
+"	.type	kernel_thread_helper, #function\n"
+"kernel_thread_helper:\n"
+"	mov.a	asr, r7\n"
+"	mov	r0, r4\n"
+"	mov	lr, r6\n"
+"	mov	pc, r5\n"
+"	.size	kernel_thread_helper, . - kernel_thread_helper\n"
+"	.popsection");
+
+/*
+ * Create a kernel thread.
+ */
+pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+	regs.UCreg_04 = (unsigned long)arg;
+	regs.UCreg_05 = (unsigned long)fn;
+	regs.UCreg_06 = (unsigned long)do_exit;
+	regs.UCreg_07 = PRIV_MODE;
+	regs.UCreg_pc = (unsigned long)kernel_thread_helper;
+	regs.UCreg_asr = regs.UCreg_07 | PSR_I_BIT;
+
+	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	struct stackframe frame;
+	int count = 0;
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	frame.fp = thread_saved_fp(p);
+	frame.sp = thread_saved_sp(p);
+	frame.lr = 0;			/* recovered from the stack */
+	frame.pc = thread_saved_pc(p);
+	do {
+		int ret = unwind_frame(&frame);
+		if (ret < 0)
+			return 0;
+		if (!in_sched_functions(frame.pc))
+			return frame.pc;
+	} while ((count++) < 16);
+	return 0;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long range_end = mm->brk + 0x02000000;
+	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
+
+/*
+ * The vectors page is always readable from user space for the
+ * atomic helpers and the signal restart code.  Let's declare a mapping
+ * for it so it is visible through ptrace and /proc/<pid>/mem.
+ */
+
+int vectors_user_mapping(void)
+{
+	struct mm_struct *mm = current->mm;
+	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYEXEC |
+				       VM_RESERVED,
+				       NULL);
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+}
diff --git a/arch/unicore32/kernel/ptrace.c b/arch/unicore32/kernel/ptrace.c
new file mode 100644
index 00000000..9f07c08d
--- /dev/null
+++ b/arch/unicore32/kernel/ptrace.c
@@ -0,0 +1,149 @@
+/*
+ * linux/arch/unicore32/kernel/ptrace.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * By Ross Biro 1/23/92
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+#include <linux/uaccess.h>
+
+/*
+ * this routine will get a word off of the processes privileged stack.
+ * the offset is how far from the base addr as stored in the THREAD.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline long get_user_reg(struct task_struct *task, int offset)
+{
+	return task_pt_regs(task)->uregs[offset];
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the THREAD.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline int
+put_user_reg(struct task_struct *task, int offset, long data)
+{
+	struct pt_regs newregs, *regs = task_pt_regs(task);
+	int ret = -EINVAL;
+
+	newregs = *regs;
+	newregs.uregs[offset] = data;
+
+	if (valid_user_regs(&newregs)) {
+		regs->uregs[offset] = data;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+}
+
+/*
+ * We actually access the pt_regs stored on the kernel stack.
+ */
+static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
+			    unsigned long __user *ret)
+{
+	unsigned long tmp;
+
+	tmp = 0;
+	if (off < sizeof(struct pt_regs))
+		tmp = get_user_reg(tsk, off >> 2);
+
+	return put_user(tmp, ret);
+}
+
+/*
+ * We actually access the pt_regs stored on the kernel stack.
+ */
+static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
+			     unsigned long val)
+{
+	if (off >= sizeof(struct pt_regs))
+		return 0;
+
+	return put_user_reg(tsk, off >> 2, val);
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	int ret;
+	unsigned long __user *datap = (unsigned long __user *) data;
+
+	switch (request) {
+	case PTRACE_PEEKUSR:
+		ret = ptrace_read_user(child, addr, datap);
+		break;
+
+	case PTRACE_POKEUSR:
+		ret = ptrace_write_user(child, addr, data);
+		break;
+
+	case PTRACE_GET_THREAD_AREA:
+		ret = put_user(task_pt_regs(child)->UCreg_16,
+			       datap);
+		break;
+
+	default:
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
+{
+	unsigned long ip;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return scno;
+	if (!(current->ptrace & PT_PTRACED))
+		return scno;
+
+	/*
+	 * Save IP.  IP is used to denote syscall entry/exit:
+	 *  IP = 0 -> entry, = 1 -> exit
+	 */
+	ip = regs->UCreg_ip;
+	regs->UCreg_ip = why;
+
+	current_thread_info()->syscall = scno;
+
+	/* the 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				 ? 0x80 : 0));
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+	regs->UCreg_ip = ip;
+
+	return current_thread_info()->syscall;
+}
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
new file mode 100644
index 00000000..254adeec
--- /dev/null
+++ b/arch/unicore32/kernel/puv3-core.c
@@ -0,0 +1,279 @@
+/*
+ *  linux/arch/unicore32/kernel/puv3-core.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/usb/musb.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/pm.h>
+
+/*
+ * This is the PKUnity sched_clock implementation.  This has
+ * a resolution of 271ns, and a maximum value of 32025597s (370 days).
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 582 seconds between successive
+ * calls to this function.
+ *
+ *  ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(readl(OST_OSCR));
+
+	/* original conservative method, but overflow frequently
+	 * v *= NSEC_PER_SEC >> 12;
+	 * do_div(v, CLOCK_TICK_RATE >> 12);
+	 */
+	v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5;
+
+	return v;
+}
+
+static struct resource puv3_usb_resources[] = {
+	/* order is significant! */
+	{
+		.start		= io_v2p(PKUNITY_USB_BASE),
+		.end		= io_v2p(PKUNITY_USB_BASE) + 0x3ff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_USB,
+		.flags		= IORESOURCE_IRQ,
+	}, {
+		.start		= IRQ_USB,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct musb_hdrc_config	puv3_usb_config[] = {
+	{
+		.num_eps = 16,
+		.multipoint = 1,
+#ifdef CONFIG_USB_INVENTRA_DMA
+		.dma = 1,
+		.dma_channels = 8,
+#endif
+	},
+};
+
+static struct musb_hdrc_platform_data puv3_usb_plat = {
+	.mode		= MUSB_HOST,
+	.min_power	= 100,
+	.clock		= 0,
+	.config		= puv3_usb_config,
+};
+
+static struct resource puv3_mmc_resources[] = {
+	[0] = {
+		.start	= io_v2p(PKUNITY_SDC_BASE),
+		.end	= io_v2p(PKUNITY_SDC_BASE) + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SDC,
+		.end	= IRQ_SDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource puv3_unigfx_resources[] = {
+	[0] = {
+		.start	= io_v2p(PKUNITY_UNIGFX_BASE),
+		.end	= io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource puv3_rtc_resources[] = {
+	[0] = {
+		.start = io_v2p(PKUNITY_RTC_BASE),
+		.end   = io_v2p(PKUNITY_RTC_BASE) + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTCAlarm,
+		.end   = IRQ_RTCAlarm,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource puv3_pwm_resources[] = {
+	[0] = {
+		.start	= io_v2p(PKUNITY_OST_BASE) + 0x80,
+		.end	= io_v2p(PKUNITY_OST_BASE) + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource puv3_uart0_resources[] = {
+	[0] = {
+		.start = io_v2p(PKUNITY_UART0_BASE),
+		.end   = io_v2p(PKUNITY_UART0_BASE) + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_UART0,
+		.end   = IRQ_UART0,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource puv3_uart1_resources[] = {
+	[0] = {
+		.start = io_v2p(PKUNITY_UART1_BASE),
+		.end   = io_v2p(PKUNITY_UART1_BASE) + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_UART1,
+		.end   = IRQ_UART1,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource puv3_umal_resources[] = {
+	[0] = {
+		.start = io_v2p(PKUNITY_UMAL_BASE),
+		.end   = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_UMAL,
+		.end   = IRQ_UMAL,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+#ifdef CONFIG_PUV3_PM
+
+#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
+
+/*
+ * List of global PXA peripheral registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+enum {
+	SLEEP_SAVE_PM_PLLDDRCFG,
+	SLEEP_SAVE_COUNT
+};
+
+
+static void puv3_cpu_pm_save(unsigned long *sleep_save)
+{
+/*	SAVE(PM_PLLDDRCFG); */
+}
+
+static void puv3_cpu_pm_restore(unsigned long *sleep_save)
+{
+/*	RESTORE(PM_PLLDDRCFG); */
+}
+
+static int puv3_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG);
+	return 0;
+}
+
+static void puv3_cpu_pm_enter(suspend_state_t state)
+{
+	/* Clear reset status */
+	writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR
+			| RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR);
+
+	switch (state) {
+/*	case PM_SUSPEND_ON:
+		puv3_cpu_idle();
+		break; */
+	case PM_SUSPEND_MEM:
+		puv3_cpu_pm_prepare();
+		puv3_cpu_suspend(PM_PMCR_SFB);
+		break;
+	}
+}
+
+static int puv3_cpu_pm_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM;
+}
+
+static void puv3_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	/* PSPR = 0; */
+}
+
+static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = {
+	.save_count	= SLEEP_SAVE_COUNT,
+	.valid		= puv3_cpu_pm_valid,
+	.save		= puv3_cpu_pm_save,
+	.restore	= puv3_cpu_pm_restore,
+	.enter		= puv3_cpu_pm_enter,
+	.prepare	= puv3_cpu_pm_prepare,
+	.finish		= puv3_cpu_pm_finish,
+};
+
+static void __init puv3_init_pm(void)
+{
+	puv3_cpu_pm_fns = &puv3_cpu_pm_fnss;
+}
+#else
+static inline void puv3_init_pm(void) {}
+#endif
+
+void puv3_ps2_init(void)
+{
+	struct clk *bclk32;
+
+	bclk32 = clk_get(NULL, "BUS32_CLK");
+	writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */
+}
+
+void __init puv3_core_init(void)
+{
+	puv3_init_pm();
+	puv3_ps2_init();
+
+	platform_device_register_simple("PKUnity-v3-RTC", -1,
+			puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources));
+	platform_device_register_simple("PKUnity-v3-UMAL", -1,
+			puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
+	platform_device_register_simple("PKUnity-v3-MMC", -1,
+			puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
+	platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
+			puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
+	platform_device_register_simple("PKUnity-v3-PWM", -1,
+			puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
+	platform_device_register_simple("PKUnity-v3-UART", 0,
+			puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources));
+	platform_device_register_simple("PKUnity-v3-UART", 1,
+			puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources));
+	platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0);
+	platform_device_register_resndata(&platform_bus, "musb_hdrc", -1,
+			puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources),
+			&puv3_usb_plat, sizeof(puv3_usb_plat));
+}
+
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
new file mode 100644
index 00000000..181108b8
--- /dev/null
+++ b/arch/unicore32/kernel/puv3-nb0916.c
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/unicore32/kernel/puv3-nb0916.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <mach/hardware.h>
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width		= 1,
+};
+
+static struct resource physmap_flash_resource = {
+	.start		= 0xFFF80000,
+	.end		= 0xFFFFFFFF,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct resource puv3_i2c_resources[] = {
+	[0] = {
+		.start = io_v2p(PKUNITY_I2C_BASE),
+		.end   = io_v2p(PKUNITY_I2C_BASE) + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_I2C,
+		.end   = IRQ_I2C,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_pwm_backlight_data nb0916_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 70 * 1024,
+};
+
+static struct gpio_keys_button nb0916_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_POWER,
+		.gpio	= GPI_SOFF_REQ,
+		.desc	= "Power Button",
+		.wakeup = 1,
+		.active_low = 1,
+	},
+	{
+		.type	= EV_KEY,
+		.code	= BTN_TOUCH,
+		.gpio	= GPI_BTN_TOUCH,
+		.desc	= "Touchpad Button",
+		.wakeup = 1,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_keys_platform_data nb0916_gpio_button_data = {
+	.buttons	= nb0916_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(nb0916_gpio_keys),
+};
+
+static irqreturn_t nb0916_lcdcaseoff_handler(int irq, void *dev_id)
+{
+	if (gpio_get_value(GPI_LCD_CASE_OFF))
+		gpio_set_value(GPO_LCD_EN, 1);
+	else
+		gpio_set_value(GPO_LCD_EN, 0);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t nb0916_overheat_handler(int irq, void *dev_id)
+{
+	machine_halt();
+	/* SYSTEM HALT, NO RETURN */
+	return IRQ_HANDLED;
+}
+
+static struct i2c_board_info __initdata puv3_i2c_devices[] = {
+	{	I2C_BOARD_INFO("lm75",		I2C_TAR_THERMAL),	},
+	{	I2C_BOARD_INFO("bq27200",	I2C_TAR_PWIC),		},
+	{	I2C_BOARD_INFO("24c02",		I2C_TAR_EEPROM),	},
+};
+
+int __init mach_nb0916_init(void)
+{
+	i2c_register_board_info(0, puv3_i2c_devices,
+			ARRAY_SIZE(puv3_i2c_devices));
+
+	platform_device_register_simple("PKUnity-v3-I2C", -1,
+			puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources));
+
+	platform_device_register_data(&platform_bus, "pwm-backlight", -1,
+			&nb0916_backlight_data, sizeof(nb0916_backlight_data));
+
+	platform_device_register_data(&platform_bus, "gpio-keys", -1,
+			&nb0916_gpio_button_data, sizeof(nb0916_gpio_button_data));
+
+	platform_device_register_resndata(&platform_bus, "physmap-flash", -1,
+			&physmap_flash_resource, 1,
+			&physmap_flash_data, sizeof(physmap_flash_data));
+
+	if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF),
+		&nb0916_lcdcaseoff_handler,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"NB0916 lcd case off", NULL) < 0) {
+
+		printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n",
+			gpio_to_irq(GPI_LCD_CASE_OFF));
+	}
+
+	if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+		"NB0916 overheating protection", NULL) < 0) {
+
+		printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n",
+			gpio_to_irq(GPI_OTP_INT));
+	}
+
+	return 0;
+}
+
+subsys_initcall_sync(mach_nb0916_init);
diff --git a/arch/unicore32/kernel/pwm.c b/arch/unicore32/kernel/pwm.c
new file mode 100644
index 00000000..4615d51e
--- /dev/null
+++ b/arch/unicore32/kernel/pwm.c
@@ -0,0 +1,263 @@
+/*
+ * linux/arch/unicore32/kernel/pwm.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <mach/hardware.h>
+
+struct pwm_device {
+	struct list_head	node;
+	struct platform_device *pdev;
+
+	const char	*label;
+	struct clk	*clk;
+	int		clk_enabled;
+
+	unsigned int	use_count;
+	unsigned int	pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+
+	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	c = clk_get_rate(pwm->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 1)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = OST_PWMDCCR_FDCYCLE;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_enable(pwm->clk);
+	OST_PWMPWCR = prescale;
+	OST_PWMDCCR = pv - dc;
+	OST_PWMPCR  = pv;
+	clk_disable(pwm->clk);
+
+	return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	int rc = 0;
+
+	if (!pwm->clk_enabled) {
+		rc = clk_enable(pwm->clk);
+		if (!rc)
+			pwm->clk_enabled = 1;
+	}
+	return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	if (pwm->clk_enabled) {
+		clk_disable(pwm->clk);
+		pwm->clk_enabled = 0;
+	}
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, node) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count++;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		pr_warning("PWM device already freed\n");
+
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->node, &pwm_list);
+	mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+		unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pwm->clk = clk_get(NULL, "OST_CLK");
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+	pwm->clk_enabled = 0;
+
+	pwm->use_count = 0;
+	pwm->pwm_id = pwm_id;
+	pwm->pdev = pdev;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	__add_pwm(pwm);
+	platform_set_drvdata(pdev, pwm);
+	return pwm;
+
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ERR_PTR(ret);
+}
+
+static int __devinit puv3_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+
+	pwm = platform_get_drvdata(pdev);
+	if (pwm == NULL)
+		return -ENODEV;
+
+	mutex_lock(&pwm_lock);
+	list_del(&pwm->node);
+	mutex_unlock(&pwm_lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(pwm->clk);
+	kfree(pwm);
+	return 0;
+}
+
+static struct platform_driver puv3_pwm_driver = {
+	.driver		= {
+		.name	= "PKUnity-v3-PWM",
+	},
+	.probe		= puv3_pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret = 0;
+
+	ret = platform_driver_register(&puv3_pwm_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register puv3_pwm_driver\n");
+		return ret;
+	}
+
+	return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	platform_driver_unregister(&puv3_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
new file mode 100644
index 00000000..87adbf5e
--- /dev/null
+++ b/arch/unicore32/kernel/setup.c
@@ -0,0 +1,350 @@
+/*
+ * linux/arch/unicore32/kernel/setup.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/utsname.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/screen_info.h>
+#include <linux/init.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/memblock.h>
+#include <linux/elf.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+#include <asm/memblock.h>
+
+#include "setup.h"
+
+#ifndef MEM_SIZE
+#define MEM_SIZE	(16*1024*1024)
+#endif
+
+struct stack {
+	u32 irq[3];
+	u32 abt[3];
+	u32 und[3];
+} ____cacheline_aligned;
+
+static struct stack stacks[NR_CPUS];
+
+char elf_platform[ELF_PLATFORM_SIZE];
+EXPORT_SYMBOL(elf_platform);
+
+static char __initdata cmd_line[COMMAND_LINE_SIZE];
+
+static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
+
+/*
+ * Standard memory resources
+ */
+static struct resource mem_res[] = {
+	{
+		.name = "Kernel code",
+		.start = 0,
+		.end = 0,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.name = "Kernel data",
+		.start = 0,
+		.end = 0,
+		.flags = IORESOURCE_MEM
+	}
+};
+
+#define kernel_code mem_res[0]
+#define kernel_data mem_res[1]
+
+/*
+ * These functions re-use the assembly code in head.S, which
+ * already provide the required functionality.
+ */
+static void __init setup_processor(void)
+{
+	printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n",
+	       uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment);
+
+	sprintf(init_utsname()->machine, "puv3");
+	sprintf(elf_platform, "ucv2");
+}
+
+/*
+ * cpu_init - initialise one CPU.
+ *
+ * cpu_init sets up the per-CPU stacks.
+ */
+void cpu_init(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct stack *stk = &stacks[cpu];
+
+	/*
+	 * setup stacks for re-entrant exception handlers
+	 */
+	__asm__ (
+	"mov.a	asr, %1\n\t"
+	"add	sp, %0, %2\n\t"
+	"mov.a	asr, %3\n\t"
+	"add	sp, %0, %4\n\t"
+	"mov.a	asr, %5\n\t"
+	"add	sp, %0, %6\n\t"
+	"mov.a	asr, %7"
+	    :
+	    : "r" (stk),
+	      "r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE),
+	      "I" (offsetof(struct stack, irq[0])),
+	      "r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE),
+	      "I" (offsetof(struct stack, abt[0])),
+	      "r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE),
+	      "I" (offsetof(struct stack, und[0])),
+	      "r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE)
+	: "r30", "cc");
+}
+
+static int __init uc32_add_memory(unsigned long start, unsigned long size)
+{
+	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
+
+	if (meminfo.nr_banks >= NR_BANKS) {
+		printk(KERN_CRIT "NR_BANKS too low, "
+			"ignoring memory at %#lx\n", start);
+		return -EINVAL;
+	}
+
+	/*
+	 * Ensure that start/size are aligned to a page boundary.
+	 * Size is appropriately rounded down, start is rounded up.
+	 */
+	size -= start & ~PAGE_MASK;
+
+	bank->start = PAGE_ALIGN(start);
+	bank->size  = size & PAGE_MASK;
+
+	/*
+	 * Check whether this memory region has non-zero size or
+	 * invalid node number.
+	 */
+	if (bank->size == 0)
+		return -EINVAL;
+
+	meminfo.nr_banks++;
+	return 0;
+}
+
+/*
+ * Pick out the memory size.  We look for mem=size@start,
+ * where start and size are "size[KkMm]"
+ */
+static int __init early_mem(char *p)
+{
+	static int usermem __initdata = 1;
+	unsigned long size, start;
+	char *endp;
+
+	/*
+	 * If the user specifies memory size, we
+	 * blow away any automatically generated
+	 * size.
+	 */
+	if (usermem) {
+		usermem = 0;
+		meminfo.nr_banks = 0;
+	}
+
+	start = PHYS_OFFSET;
+	size  = memparse(p, &endp);
+	if (*endp == '@')
+		start = memparse(endp + 1, NULL);
+
+	uc32_add_memory(start, size);
+
+	return 0;
+}
+early_param("mem", early_mem);
+
+static void __init
+request_standard_resources(struct meminfo *mi)
+{
+	struct resource *res;
+	int i;
+
+	kernel_code.start   = virt_to_phys(_stext);
+	kernel_code.end     = virt_to_phys(_etext - 1);
+	kernel_data.start   = virt_to_phys(_sdata);
+	kernel_data.end     = virt_to_phys(_end - 1);
+
+	for (i = 0; i < mi->nr_banks; i++) {
+		if (mi->bank[i].size == 0)
+			continue;
+
+		res = alloc_bootmem_low(sizeof(*res));
+		res->name  = "System RAM";
+		res->start = mi->bank[i].start;
+		res->end   = mi->bank[i].start + mi->bank[i].size - 1;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+		request_resource(&iomem_resource, res);
+
+		if (kernel_code.start >= res->start &&
+		    kernel_code.end <= res->end)
+			request_resource(res, &kernel_code);
+		if (kernel_data.start >= res->start &&
+		    kernel_data.end <= res->end)
+			request_resource(res, &kernel_data);
+	}
+}
+
+static void (*init_machine)(void) __initdata;
+
+static int __init customize_machine(void)
+{
+	/* customizes platform devices, or adds new ones */
+	if (init_machine)
+		init_machine();
+	return 0;
+}
+arch_initcall(customize_machine);
+
+void __init setup_arch(char **cmdline_p)
+{
+	char *from = default_command_line;
+
+	setup_processor();
+
+	init_mm.start_code = (unsigned long) _stext;
+	init_mm.end_code   = (unsigned long) _etext;
+	init_mm.end_data   = (unsigned long) _edata;
+	init_mm.brk	   = (unsigned long) _end;
+
+	/* parse_early_param needs a boot_command_line */
+	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
+
+	/* populate cmd_line too for later use, preserving boot_command_line */
+	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = cmd_line;
+
+	parse_early_param();
+
+	uc32_memblock_init(&meminfo);
+
+	paging_init();
+	request_standard_resources(&meminfo);
+
+	cpu_init();
+
+	/*
+	 * Set up various architecture-specific pointers
+	 */
+	init_machine = puv3_core_init;
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+	early_trap_init();
+}
+
+static struct cpu cpuinfo_unicore;
+
+static int __init topology_init(void)
+{
+	int i;
+
+	for_each_possible_cpu(i)
+		register_cpu(&cpuinfo_unicore, i);
+
+	return 0;
+}
+subsys_initcall(topology_init);
+
+#ifdef CONFIG_HAVE_PROC_CPU
+static int __init proc_cpu_init(void)
+{
+	struct proc_dir_entry *res;
+
+	res = proc_mkdir("cpu", NULL);
+	if (!res)
+		return -ENOMEM;
+	return 0;
+}
+fs_initcall(proc_cpu_init);
+#endif
+
+static int c_show(struct seq_file *m, void *v)
+{
+	seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n",
+		   (int)(uc32_cpuid >> 16) & 15, elf_platform);
+
+	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+		   loops_per_jiffy / (500000/HZ),
+		   (loops_per_jiffy / (5000/HZ)) % 100);
+
+	/* dump out the processor features */
+	seq_puts(m, "Features\t: CMOV UC-F64");
+
+	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24);
+	seq_printf(m, "CPU architecture: 2\n");
+	seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15);
+
+	seq_printf(m, "Cache type\t: write-back\n"
+			"Cache clean\t: cp0 c5 ops\n"
+			"Cache lockdown\t: not support\n"
+			"Cache format\t: Harvard\n");
+
+	seq_puts(m, "\n");
+
+	seq_printf(m, "Hardware\t: PKUnity v3\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= c_show
+};
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
new file mode 100644
index 00000000..f2395502
--- /dev/null
+++ b/arch/unicore32/kernel/setup.h
@@ -0,0 +1,33 @@
+/*
+ * linux/arch/unicore32/kernel/setup.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UNICORE_KERNEL_SETUP_H__
+#define __UNICORE_KERNEL_SETUP_H__
+
+#include <asm/hwdef-copro.h>
+
+extern void paging_init(void);
+extern void puv3_core_init(void);
+extern void cpu_init(void);
+
+extern void puv3_ps2_init(void);
+extern void pci_puv3_preinit(void);
+extern void __init puv3_init_gpio(void);
+
+extern void setup_mm_for_reboot(char mode);
+
+extern char __stubs_start[], __stubs_end[];
+extern char __vectors_start[], __vectors_end[];
+
+extern void kernel_thread_helper(void);
+
+extern void __init early_signal_init(void);
+#endif
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
new file mode 100644
index 00000000..911b549a
--- /dev/null
+++ b/arch/unicore32/kernel/signal.c
@@ -0,0 +1,489 @@
+/*
+ * linux/arch/unicore32/kernel/signal.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <linux/freezer.h>
+#include <linux/uaccess.h>
+#include <linux/tracehook.h>
+#include <linux/elf.h>
+#include <linux/unistd.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * For UniCore syscalls, we encode the syscall number into the instruction.
+ */
+#define SWI_SYS_SIGRETURN	(0xff000000) /* error number for new abi */
+#define SWI_SYS_RT_SIGRETURN	(0xff000000 | (__NR_rt_sigreturn))
+#define SWI_SYS_RESTART		(0xff000000 | (__NR_restart_syscall))
+
+#define KERN_SIGRETURN_CODE	(KUSER_VECPAGE_BASE + 0x00000500)
+#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
+
+const unsigned long sigreturn_codes[3] = {
+	SWI_SYS_SIGRETURN, SWI_SYS_RT_SIGRETURN,
+};
+
+const unsigned long syscall_restart_code[2] = {
+	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
+	0x69efc004,		/* ldr	pc, [sp], #4 */
+};
+
+/*
+ * Do a signal return; undo the signal stack.  These are aligned to 64-bit.
+ */
+struct sigframe {
+	struct ucontext uc;
+	unsigned long retcode[2];
+};
+
+struct rt_sigframe {
+	struct siginfo info;
+	struct sigframe sig;
+};
+
+static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
+{
+	sigset_t set;
+	int err;
+
+	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
+	if (err == 0) {
+		sigdelsetmask(&set, ~_BLOCKABLE);
+		set_current_blocked(&set);
+	}
+
+	err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
+	err |= __get_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
+	err |= __get_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
+	err |= __get_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
+	err |= __get_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
+	err |= __get_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
+	err |= __get_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
+	err |= __get_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
+	err |= __get_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
+	err |= __get_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
+	err |= __get_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
+	err |= __get_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
+	err |= __get_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
+	err |= __get_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
+	err |= __get_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
+	err |= __get_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
+	err |= __get_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
+	err |= __get_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
+	err |= __get_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
+	err |= __get_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
+	err |= __get_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
+	err |= __get_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
+	err |= __get_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
+	err |= __get_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
+	err |= __get_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
+	err |= __get_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
+	err |= __get_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
+	err |= __get_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
+	err |= __get_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
+	err |= __get_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
+	err |= __get_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
+	err |= __get_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
+	err |= __get_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
+
+	err |= !valid_user_regs(regs);
+
+	return err;
+}
+
+asmlinkage int __sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 64-bit boundary,
+	 * then 'sp' should be word aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (regs->UCreg_sp & 7)
+		goto badframe;
+
+	frame = (struct rt_sigframe __user *)regs->UCreg_sp;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+
+	if (restore_sigframe(regs, &frame->sig))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->UCreg_sp)
+			== -EFAULT)
+		goto badframe;
+
+	return regs->UCreg_00;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs,
+		sigset_t *set)
+{
+	int err = 0;
+
+	err |= __put_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
+	err |= __put_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
+	err |= __put_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
+	err |= __put_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
+	err |= __put_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
+	err |= __put_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
+	err |= __put_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
+	err |= __put_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
+	err |= __put_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
+	err |= __put_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
+	err |= __put_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
+	err |= __put_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
+	err |= __put_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
+	err |= __put_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
+	err |= __put_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
+	err |= __put_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
+	err |= __put_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
+	err |= __put_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
+	err |= __put_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
+	err |= __put_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
+	err |= __put_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
+	err |= __put_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
+	err |= __put_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
+	err |= __put_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
+	err |= __put_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
+	err |= __put_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
+	err |= __put_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
+	err |= __put_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
+	err |= __put_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
+	err |= __put_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
+	err |= __put_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
+	err |= __put_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
+	err |= __put_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
+
+	err |= __put_user(current->thread.trap_no,
+			&sf->uc.uc_mcontext.trap_no);
+	err |= __put_user(current->thread.error_code,
+			&sf->uc.uc_mcontext.error_code);
+	err |= __put_user(current->thread.address,
+			&sf->uc.uc_mcontext.fault_address);
+	err |= __put_user(set->sig[0], &sf->uc.uc_mcontext.oldmask);
+
+	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
+
+	return err;
+}
+
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+		struct pt_regs *regs, int framesize)
+{
+	unsigned long sp = regs->UCreg_sp;
+	void __user *frame;
+
+	/*
+	 * This is the X/Open sanctioned signal stack switching.
+	 */
+	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+	/*
+	 * ATPCS B01 mandates 8-byte alignment
+	 */
+	frame = (void __user *)((sp - framesize) & ~7);
+
+	/*
+	 * Check that we can actually write to the signal frame.
+	 */
+	if (!access_ok(VERIFY_WRITE, frame, framesize))
+		frame = NULL;
+
+	return frame;
+}
+
+static int setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+	     unsigned long __user *rc, void __user *frame, int usig)
+{
+	unsigned long handler = (unsigned long)ka->sa.sa_handler;
+	unsigned long retcode;
+	unsigned long asr = regs->UCreg_asr & ~PSR_f;
+
+	unsigned int idx = 0;
+
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		idx += 1;
+
+	if (__put_user(sigreturn_codes[idx],   rc) ||
+	    __put_user(sigreturn_codes[idx+1], rc+1))
+		return 1;
+
+	retcode = KERN_SIGRETURN_CODE + (idx << 2);
+
+	regs->UCreg_00 = usig;
+	regs->UCreg_sp = (unsigned long)frame;
+	regs->UCreg_lr = retcode;
+	regs->UCreg_pc = handler;
+	regs->UCreg_asr = asr;
+
+	return 0;
+}
+
+static int setup_frame(int usig, struct k_sigaction *ka,
+		sigset_t *set, struct pt_regs *regs)
+{
+	struct sigframe __user *frame = get_sigframe(ka, regs, sizeof(*frame));
+	int err = 0;
+
+	if (!frame)
+		return 1;
+
+	/*
+	 * Set uc.uc_flags to a value which sc.trap_no would never have.
+	 */
+	err |= __put_user(0x5ac3c35a, &frame->uc.uc_flags);
+
+	err |= setup_sigframe(frame, regs, set);
+	if (err == 0)
+		err |= setup_return(regs, ka, frame->retcode, frame, usig);
+
+	return err;
+}
+
+static int setup_rt_frame(int usig, struct k_sigaction *ka, siginfo_t *info,
+	       sigset_t *set, struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame =
+			get_sigframe(ka, regs, sizeof(*frame));
+	stack_t stack;
+	int err = 0;
+
+	if (!frame)
+		return 1;
+
+	err |= copy_siginfo_to_user(&frame->info, info);
+
+	err |= __put_user(0, &frame->sig.uc.uc_flags);
+	err |= __put_user(NULL, &frame->sig.uc.uc_link);
+
+	memset(&stack, 0, sizeof(stack));
+	stack.ss_sp = (void __user *)current->sas_ss_sp;
+	stack.ss_flags = sas_ss_flags(regs->UCreg_sp);
+	stack.ss_size = current->sas_ss_size;
+	err |= __copy_to_user(&frame->sig.uc.uc_stack, &stack, sizeof(stack));
+
+	err |= setup_sigframe(&frame->sig, regs, set);
+	if (err == 0)
+		err |= setup_return(regs, ka, frame->sig.retcode, frame, usig);
+
+	if (err == 0) {
+		/*
+		 * For realtime signals we must also set the second and third
+		 * arguments for the signal handler.
+		 */
+		regs->UCreg_01 = (unsigned long)&frame->info;
+		regs->UCreg_02 = (unsigned long)&frame->sig.uc;
+	}
+
+	return err;
+}
+
+static inline void setup_syscall_restart(struct pt_regs *regs)
+{
+	regs->UCreg_00 = regs->UCreg_ORIG_00;
+	regs->UCreg_pc -= 4;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static int handle_signal(unsigned long sig, struct k_sigaction *ka,
+	      siginfo_t *info, sigset_t *oldset,
+	      struct pt_regs *regs, int syscall)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = current;
+	sigset_t blocked;
+	int usig = sig;
+	int ret;
+
+	/*
+	 * If we were from a system call, check for system call restarting...
+	 */
+	if (syscall) {
+		switch (regs->UCreg_00) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			regs->UCreg_00 = -EINTR;
+			break;
+		case -ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				regs->UCreg_00 = -EINTR;
+				break;
+			}
+			/* fallthrough */
+		case -ERESTARTNOINTR:
+			setup_syscall_restart(regs);
+		}
+	}
+
+	/*
+	 * translate the signal
+	 */
+	if (usig < 32 && thread->exec_domain
+			&& thread->exec_domain->signal_invmap)
+		usig = thread->exec_domain->signal_invmap[usig];
+
+	/*
+	 * Set up the stack frame
+	 */
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		ret = setup_rt_frame(usig, ka, info, oldset, regs);
+	else
+		ret = setup_frame(usig, ka, oldset, regs);
+
+	/*
+	 * Check that the resulting registers are actually sane.
+	 */
+	ret |= !valid_user_regs(regs);
+
+	if (ret != 0) {
+		force_sigsegv(sig, tsk);
+		return ret;
+	}
+
+	/*
+	 * Block the signal if we were successful.
+	 */
+	sigorsets(&blocked, &tsk->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&blocked, sig);
+	set_current_blocked(&blocked);
+
+	return 0;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs, int syscall)
+{
+	struct k_sigaction ka;
+	siginfo_t info;
+	int signr;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		sigset_t *oldset;
+
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			oldset = &current->saved_sigmask;
+		else
+			oldset = &current->blocked;
+		if (handle_signal(signr, &ka, &info, oldset, regs, syscall)
+				== 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
+		return;
+	}
+
+ no_signal:
+	/*
+	 * No signal to deliver to the process - restart the syscall.
+	 */
+	if (syscall) {
+		if (regs->UCreg_00 == -ERESTART_RESTARTBLOCK) {
+				u32 __user *usp;
+
+				regs->UCreg_sp -= 4;
+				usp = (u32 __user *)regs->UCreg_sp;
+
+				if (put_user(regs->UCreg_pc, usp) == 0) {
+					regs->UCreg_pc = KERN_RESTART_CODE;
+				} else {
+					regs->UCreg_sp += 4;
+					force_sigsegv(0, current);
+				}
+		}
+		if (regs->UCreg_00 == -ERESTARTNOHAND ||
+		    regs->UCreg_00 == -ERESTARTSYS ||
+		    regs->UCreg_00 == -ERESTARTNOINTR) {
+			setup_syscall_restart(regs);
+		}
+
+		/* If there's no signal to deliver, we just put the saved
+		 * sigmask back.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
+	}
+}
+
+asmlinkage void do_notify_resume(struct pt_regs *regs,
+		unsigned int thread_flags, int syscall)
+{
+	if (thread_flags & _TIF_SIGPENDING)
+		do_signal(regs, syscall);
+
+	if (thread_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
+	}
+}
+
+/*
+ * Copy signal return handlers into the vector page, and
+ * set sigreturn to be a pointer to these.
+ */
+void __init early_signal_init(void)
+{
+	memcpy((void *)kuser_vecpage_to_vectors(KERN_SIGRETURN_CODE),
+			sigreturn_codes, sizeof(sigreturn_codes));
+	memcpy((void *)kuser_vecpage_to_vectors(KERN_RESTART_CODE),
+			syscall_restart_code, sizeof(syscall_restart_code));
+	/* Need not to flush icache, since early_trap_init will do it last. */
+}
diff --git a/arch/unicore32/kernel/sleep.S b/arch/unicore32/kernel/sleep.S
new file mode 100644
index 00000000..607a104a
--- /dev/null
+++ b/arch/unicore32/kernel/sleep.S
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/unicore32/kernel/sleep.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+		.text
+
+pkunity_cpu_save_cp:
+
+	@ get coprocessor registers
+
+	movc	r3, p0.c7, #0			@ PID
+	movc	r4, p0.c2, #0			@ translation table base addr
+	movc	r5, p0.c1, #0			@ control reg
+
+
+	@ store them plus current virtual stack ptr on stack
+	mov	r6, sp
+	stm.w	(r3 - r6), [sp-]
+
+	mov	pc, lr
+
+pkunity_cpu_save_sp:
+	@ preserve phys address of stack
+	mov	r0, sp
+	stw.w	lr, [sp+], #-4
+	b.l	sleep_phys_sp
+	ldw	r1, =sleep_save_sp
+	stw	r0, [r1]
+	ldw.w	pc, [sp]+, #4
+
+/*
+ * puv3_cpu_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(puv3_cpu_suspend)
+	stm.w	(r16 - r27, lr), [sp-]		@ save registers on stack
+	stm.w	(r4 - r15), [sp-]		@ save registers on stack
+
+#ifdef	CONFIG_UNICORE_FPU_F64
+	sfm.w	(f0  - f7 ), [sp-]
+	sfm.w	(f8  - f15), [sp-]
+	sfm.w	(f16 - f23), [sp-]
+	sfm.w	(f24 - f31), [sp-]
+	cff	r4, s31
+	stm.w	(r4), [sp-]
+#endif
+	b.l	pkunity_cpu_save_cp
+
+	b.l	pkunity_cpu_save_sp
+
+	@ clean data cache
+	mov	r1, #0
+	movc	p0.c5, r1, #14
+	nop
+	nop
+	nop
+	nop
+
+
+
+	@ DDR2 BaseAddr
+	ldw	r0, =(PKUNITY_DDR2CTRL_BASE)
+
+	@ PM BaseAddr
+	ldw	r1, =(PKUNITY_PM_BASE)
+
+	@ set PLL_SYS_CFG reg, 275
+	movl	r6, #0x00002401
+	stw	r6, [r1+], #0x18
+	@ set PLL_DDR_CFG reg, 66MHz
+	movl	r6, #0x00100c00
+	stw	r6, [r1+], #0x1c
+
+	@ set wake up source
+	movl	r8, #0x800001ff		@ epip4d
+	stw	r8, [r1+], #0xc
+
+	@ set PGSR
+	movl	r5, #0x40000
+	stw	r5, [r1+], #0x10
+
+	@ prepare DDR2 refresh settings
+	ldw	r5, [r0+], #0x24
+	or	r5, r5, #0x00000001
+
+	@ prepare PMCR for PLL changing
+	movl	r6, #0xc
+
+	@ prepare for closing PLL
+	movl	r7, #0x1
+
+	@ prepare sleep mode
+	mov	r8, #0x1
+
+@	movl	r0, 0x11111111
+@	put_word_ocd r0
+	b	pkunity_cpu_do_suspend
+
+	.ltorg
+	.align	5
+pkunity_cpu_do_suspend:
+	b	101f
+	@ put DDR2 into self-refresh
+100:	stw	r5, [r0+], #0x24
+	@ change PLL
+	stw	r6, [r1]
+	b	1f
+
+	.ltorg
+	.align	5
+101:	b	102f
+	@ wait for PLL changing complete
+1:	ldw	r6, [r1+], #0x44
+	csub.a	r6, #0x1
+	bne	1b
+	b	2f
+
+	.ltorg
+	.align	5
+102:	b	100b
+	@ close PLL
+2:	stw	r7, [r1+], #0x4
+	@ enter sleep mode
+	stw	r8, [r1]
+3:	b	3b
+
+
+
+
+/*
+ * puv3_cpu_resume()
+ *
+ * entry point from bootloader into kernel during resume
+ *
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow sleep_save_sp to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truly read-only.
+ */
+
+	.data
+	.align 5
+ENTRY(puv3_cpu_resume)
+@	movl	r0, 0x20202020
+@	put_word_ocd r0
+
+	ldw	r0, sleep_save_sp		@ stack phys addr
+	ldw	r2, =resume_after_mmu		@ its absolute virtual address
+	ldm	(r3 - r6), [r0]+		@ CP regs + virt stack ptr
+	mov	sp, r6				@ CP regs + virt stack ptr
+
+	mov	r1, #0
+	movc	p0.c6, r1, #6			@ invalidate I & D TLBs
+	movc	p0.c5, r1, #28			@ invalidate I & D caches, BTB
+
+	movc	p0.c7, r3, #0			@ PID
+	movc	p0.c2, r4, #0			@ translation table base addr
+	movc	p0.c1, r5, #0			@ control reg, turn on mmu
+	nop
+	jump	r2
+	nop
+	nop
+	nop
+	nop
+	nop
+
+sleep_save_sp:
+	.word	0				@ preserve stack phys ptr here
+
+	.text
+resume_after_mmu:
+@	movl	r0, 0x30303030
+@	put_word_ocd r0
+
+#ifdef	CONFIG_UNICORE_FPU_F64
+	lfm.w	(f0  - f7 ), [sp]+
+	lfm.w	(f8  - f15), [sp]+
+	lfm.w	(f16 - f23), [sp]+
+	lfm.w	(f24 - f31), [sp]+
+	ldm.w	(r4), [sp]+
+	ctf	r4, s31
+#endif
+	ldm.w	(r4 - r15), [sp]+		@ restore registers from stack
+	ldm.w	(r16 - r27, pc), [sp]+		@ return to caller
diff --git a/arch/unicore32/kernel/stacktrace.c b/arch/unicore32/kernel/stacktrace.c
new file mode 100644
index 00000000..b34030bd
--- /dev/null
+++ b/arch/unicore32/kernel/stacktrace.c
@@ -0,0 +1,131 @@
+/*
+ * linux/arch/unicore32/kernel/stacktrace.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+
+#include <asm/stacktrace.h>
+
+#if defined(CONFIG_FRAME_POINTER)
+/*
+ * Unwind the current stack frame and store the new register values in the
+ * structure passed as argument. Unwinding is equivalent to a function return,
+ * hence the new PC value rather than LR should be used for backtrace.
+ *
+ * With framepointer enabled, a simple function prologue looks like this:
+ *	mov	ip, sp
+ *	stmdb	sp!, {fp, ip, lr, pc}
+ *	sub	fp, ip, #4
+ *
+ * A simple function epilogue looks like this:
+ *	ldm	sp, {fp, sp, pc}
+ *
+ * Note that with framepointer enabled, even the leaf functions have the same
+ * prologue and epilogue, therefore we can ignore the LR value in this case.
+ */
+int notrace unwind_frame(struct stackframe *frame)
+{
+	unsigned long high, low;
+	unsigned long fp = frame->fp;
+
+	/* only go to a higher address on the stack */
+	low = frame->sp;
+	high = ALIGN(low, THREAD_SIZE);
+
+	/* check current frame pointer is within bounds */
+	if (fp < (low + 12) || fp + 4 >= high)
+		return -EINVAL;
+
+	/* restore the registers from the stack frame */
+	frame->fp = *(unsigned long *)(fp - 12);
+	frame->sp = *(unsigned long *)(fp - 8);
+	frame->pc = *(unsigned long *)(fp - 4);
+
+	return 0;
+}
+#endif
+
+void notrace walk_stackframe(struct stackframe *frame,
+		     int (*fn)(struct stackframe *, void *), void *data)
+{
+	while (1) {
+		int ret;
+
+		if (fn(frame, data))
+			break;
+		ret = unwind_frame(frame);
+		if (ret < 0)
+			break;
+	}
+}
+EXPORT_SYMBOL(walk_stackframe);
+
+#ifdef CONFIG_STACKTRACE
+struct stack_trace_data {
+	struct stack_trace *trace;
+	unsigned int no_sched_functions;
+	unsigned int skip;
+};
+
+static int save_trace(struct stackframe *frame, void *d)
+{
+	struct stack_trace_data *data = d;
+	struct stack_trace *trace = data->trace;
+	unsigned long addr = frame->pc;
+
+	if (data->no_sched_functions && in_sched_functions(addr))
+		return 0;
+	if (data->skip) {
+		data->skip--;
+		return 0;
+	}
+
+	trace->entries[trace->nr_entries++] = addr;
+
+	return trace->nr_entries >= trace->max_entries;
+}
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	struct stack_trace_data data;
+	struct stackframe frame;
+
+	data.trace = trace;
+	data.skip = trace->skip;
+
+	if (tsk != current) {
+		data.no_sched_functions = 1;
+		frame.fp = thread_saved_fp(tsk);
+		frame.sp = thread_saved_sp(tsk);
+		frame.lr = 0;		/* recovered from the stack */
+		frame.pc = thread_saved_pc(tsk);
+	} else {
+		register unsigned long current_sp asm("sp");
+
+		data.no_sched_functions = 0;
+		frame.fp = (unsigned long)__builtin_frame_address(0);
+		frame.sp = current_sp;
+		frame.lr = (unsigned long)__builtin_return_address(0);
+		frame.pc = (unsigned long)save_stack_trace_tsk;
+	}
+
+	walk_stackframe(&frame, save_trace, &data);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(current, trace);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace);
+#endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
new file mode 100644
index 00000000..3afe60a3
--- /dev/null
+++ b/arch/unicore32/kernel/sys.c
@@ -0,0 +1,126 @@
+/*
+ * linux/arch/unicore32/kernel/sys.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/ipc.h>
+#include <linux/uaccess.h>
+
+#include <asm/syscalls.h>
+#include <asm/cacheflush.h>
+
+/* Clone a task - this clones the calling program thread.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage long __sys_clone(unsigned long clone_flags, unsigned long newsp,
+			 void __user *parent_tid, void __user *child_tid,
+			 struct pt_regs *regs)
+{
+	if (!newsp)
+		newsp = regs->UCreg_sp;
+
+	return do_fork(clone_flags, newsp, regs, 0,
+			parent_tid, child_tid);
+}
+
+/* sys_execve() executes a new program.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage long __sys_execve(const char __user *filename,
+			  const char __user *const __user *argv,
+			  const char __user *const __user *envp,
+			  struct pt_regs *regs)
+{
+	int error;
+	char *fn;
+
+	fn = getname(filename);
+	error = PTR_ERR(fn);
+	if (IS_ERR(fn))
+		goto out;
+	error = do_execve(fn, argv, envp, regs);
+	putname(fn);
+out:
+	return error;
+}
+
+int kernel_execve(const char *filename,
+		  const char *const argv[],
+		  const char *const envp[])
+{
+	struct pt_regs regs;
+	int ret;
+
+	memset(&regs, 0, sizeof(struct pt_regs));
+	ret = do_execve(filename,
+			(const char __user *const __user *)argv,
+			(const char __user *const __user *)envp, &regs);
+	if (ret < 0)
+		goto out;
+
+	/*
+	 * Save argc to the register structure for userspace.
+	 */
+	regs.UCreg_00 = ret;
+
+	/*
+	 * We were successful.  We won't be returning to our caller, but
+	 * instead to user space by manipulating the kernel stack.
+	 */
+	asm("add	r0, %0, %1\n\t"
+		"mov	r1, %2\n\t"
+		"mov	r2, %3\n\t"
+		"mov	r22, #0\n\t"	/* not a syscall */
+		"mov	r23, %0\n\t"	/* thread structure */
+		"b.l	memmove\n\t"	/* copy regs to top of stack */
+		"mov	sp, r0\n\t"	/* reposition stack pointer */
+		"b	ret_to_user"
+		:
+		: "r" (current_thread_info()),
+		  "Ir" (THREAD_START_SP - sizeof(regs)),
+		  "r" (&regs),
+		  "Ir" (sizeof(regs))
+		: "r0", "r1", "r2", "r3", "ip", "lr", "memory");
+
+ out:
+	return ret;
+}
+EXPORT_SYMBOL(kernel_execve);
+
+/* Note: used by the compat code even in 64-bit Linux. */
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags,
+		unsigned long, fd, unsigned long, off_4k)
+{
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      off_4k);
+}
+
+/* Provide the actual syscall number to call mapping. */
+#undef __SYSCALL
+#define __SYSCALL(nr, call)	[nr] = (call),
+
+/* Note that we don't include <linux/unistd.h> but <asm/unistd.h> */
+void *sys_call_table[__NR_syscalls] = {
+	[0 ... __NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
new file mode 100644
index 00000000..d3824b2f
--- /dev/null
+++ b/arch/unicore32/kernel/time.c
@@ -0,0 +1,143 @@
+/*
+ * linux/arch/unicore32/kernel/time.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
+ *	Copyright (C) 2001-2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+
+#include <mach/hardware.h>
+
+#define MIN_OSCR_DELTA 2
+
+static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *c = dev_id;
+
+	/* Disarm the compare/match, signal the event. */
+	writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
+	writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
+	c->event_handler(c);
+
+	return IRQ_HANDLED;
+}
+
+static int
+puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
+{
+	unsigned long next, oscr;
+
+	writel(readl(OST_OIER) | OST_OIER_E0, OST_OIER);
+	next = readl(OST_OSCR) + delta;
+	writel(next, OST_OSMR0);
+	oscr = readl(OST_OSCR);
+
+	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
+}
+
+static void
+puv3_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
+		writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	}
+}
+
+static struct clock_event_device ckevt_puv3_osmr0 = {
+	.name		= "osmr0",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.set_next_event	= puv3_osmr0_set_next_event,
+	.set_mode	= puv3_osmr0_set_mode,
+};
+
+static cycle_t puv3_read_oscr(struct clocksource *cs)
+{
+	return readl(OST_OSCR);
+}
+
+static struct clocksource cksrc_puv3_oscr = {
+	.name		= "oscr",
+	.rating		= 200,
+	.read		= puv3_read_oscr,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct irqaction puv3_timer_irq = {
+	.name		= "ost0",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= puv3_ost0_interrupt,
+	.dev_id		= &ckevt_puv3_osmr0,
+};
+
+void __init time_init(void)
+{
+	writel(0, OST_OIER);		/* disable any timer interrupts */
+	writel(0, OST_OSSR);		/* clear status on all timers */
+
+	clockevents_calc_mult_shift(&ckevt_puv3_osmr0, CLOCK_TICK_RATE, 5);
+
+	ckevt_puv3_osmr0.max_delta_ns =
+		clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0);
+	ckevt_puv3_osmr0.min_delta_ns =
+		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1;
+	ckevt_puv3_osmr0.cpumask = cpumask_of(0);
+
+	setup_irq(IRQ_TIMER0, &puv3_timer_irq);
+
+	clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
+	clockevents_register_device(&ckevt_puv3_osmr0);
+}
+
+#ifdef CONFIG_PM
+unsigned long osmr[4], oier;
+
+void puv3_timer_suspend(void)
+{
+	osmr[0] = readl(OST_OSMR0);
+	osmr[1] = readl(OST_OSMR1);
+	osmr[2] = readl(OST_OSMR2);
+	osmr[3] = readl(OST_OSMR3);
+	oier = readl(OST_OIER);
+}
+
+void puv3_timer_resume(void)
+{
+	writel(0, OST_OSSR);
+	writel(osmr[0], OST_OSMR0);
+	writel(osmr[1], OST_OSMR1);
+	writel(osmr[2], OST_OSMR2);
+	writel(osmr[3], OST_OSMR3);
+	writel(oier, OST_OIER);
+
+	/*
+	 * OSMR0 is the system timer: make sure OSCR is sufficiently behind
+	 */
+	writel(readl(OST_OSMR0) - LATCH, OST_OSCR);
+}
+#else
+void puv3_timer_suspend(void) { };
+void puv3_timer_resume(void) { };
+#endif
+
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
new file mode 100644
index 00000000..2054f0d4
--- /dev/null
+++ b/arch/unicore32/kernel/traps.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/unicore32/kernel/traps.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  'traps.c' handles hardware exceptions after we have saved some state.
+ *  Mostly a debugging aid, but will probably kill the offending process.
+ */
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/spinlock.h>
+#include <linux/personality.h>
+#include <linux/kallsyms.h>
+#include <linux/kdebug.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/atomic.h>
+#include <linux/unistd.h>
+
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+#include "setup.h"
+
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
+
+void dump_backtrace_entry(unsigned long where,
+		unsigned long from, unsigned long frame)
+{
+#ifdef CONFIG_KALLSYMS
+	printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n",
+			where, (void *)where, from, (void *)from);
+#else
+	printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n",
+			where, from);
+#endif
+}
+
+/*
+ * Stack pointers should always be within the kernels view of
+ * physical memory.  If it is not there, then we can't dump
+ * out any information relating to the stack.
+ */
+static int verify_stack(unsigned long sp)
+{
+	if (sp < PAGE_OFFSET ||
+	    (sp > (unsigned long)high_memory && high_memory != NULL))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Dump out the contents of some memory nicely...
+ */
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
+{
+	unsigned long first;
+	mm_segment_t fs;
+	int i;
+
+	/*
+	 * We need to switch to kernel mode so that we can use __get_user
+	 * to safely read from kernel space.  Note that we now dump the
+	 * code first, just in case the backtrace kills us.
+	 */
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n",
+			lvl, str, bottom, top);
+
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
+
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
+
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
+			}
+		}
+		printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str);
+	}
+
+	set_fs(fs);
+}
+
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+	unsigned long addr = instruction_pointer(regs);
+	const int width = 8;
+	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
+	int i;
+
+	/*
+	 * We need to switch to kernel mode so that we can use __get_user
+	 * to safely read from kernel space.  Note that we now dump the
+	 * code first, just in case the backtrace kills us.
+	 */
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	for (i = -4; i < 1; i++) {
+		unsigned int val, bad;
+
+		bad = __get_user(val, &((u32 *)addr)[i]);
+
+		if (!bad)
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
+		else {
+			p += sprintf(p, "bad PC value");
+			break;
+		}
+	}
+	printk(KERN_DEFAULT "%sCode: %s\n", lvl, str);
+
+	set_fs(fs);
+}
+
+static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
+{
+	unsigned int fp, mode;
+	int ok = 1;
+
+	printk(KERN_DEFAULT "Backtrace: ");
+
+	if (!tsk)
+		tsk = current;
+
+	if (regs) {
+		fp = regs->UCreg_fp;
+		mode = processor_mode(regs);
+	} else if (tsk != current) {
+		fp = thread_saved_fp(tsk);
+		mode = 0x10;
+	} else {
+		asm("mov %0, fp" : "=r" (fp) : : "cc");
+		mode = 0x10;
+	}
+
+	if (!fp) {
+		printk("no frame pointer");
+		ok = 0;
+	} else if (verify_stack(fp)) {
+		printk("invalid frame pointer 0x%08x", fp);
+		ok = 0;
+	} else if (fp < (unsigned long)end_of_stack(tsk))
+		printk("frame pointer underflow");
+	printk("\n");
+
+	if (ok)
+		c_backtrace(fp, mode);
+}
+
+void dump_stack(void)
+{
+	dump_backtrace(NULL, NULL);
+}
+EXPORT_SYMBOL(dump_stack);
+
+void show_stack(struct task_struct *tsk, unsigned long *sp)
+{
+	dump_backtrace(NULL, tsk);
+	barrier();
+}
+
+static int __die(const char *str, int err, struct thread_info *thread,
+		struct pt_regs *regs)
+{
+	struct task_struct *tsk = thread->task;
+	static int die_counter;
+	int ret;
+
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
+	       str, err, ++die_counter);
+
+	/* trap and error numbers are mostly meaningless on UniCore */
+	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
+			SIGSEGV);
+	if (ret == NOTIFY_STOP)
+		return ret;
+
+	print_modules();
+	__show_regs(regs);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
+
+	if (!user_mode(regs) || in_interrupt()) {
+		dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
+			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
+		dump_backtrace(regs, tsk);
+		dump_instr(KERN_EMERG, regs);
+	}
+
+	return ret;
+}
+
+DEFINE_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+void die(const char *str, struct pt_regs *regs, int err)
+{
+	struct thread_info *thread = current_thread_info();
+	int ret;
+
+	oops_enter();
+
+	spin_lock_irq(&die_lock);
+	console_verbose();
+	bust_spinlocks(1);
+	ret = __die(str, err, thread, regs);
+
+	bust_spinlocks(0);
+	add_taint(TAINT_DIE);
+	spin_unlock_irq(&die_lock);
+	oops_exit();
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+	if (panic_on_oops)
+		panic("Fatal exception");
+	if (ret != NOTIFY_STOP)
+		do_exit(SIGSEGV);
+}
+
+void uc32_notify_die(const char *str, struct pt_regs *regs,
+		struct siginfo *info, unsigned long err, unsigned long trap)
+{
+	if (user_mode(regs)) {
+		current->thread.error_code = err;
+		current->thread.trap_no = trap;
+
+		force_sig_info(info->si_signo, info, current);
+	} else
+		die(str, regs, err);
+}
+
+/*
+ * bad_mode handles the impossible case in the vectors.  If you see one of
+ * these, then it's extremely serious, and could mean you have buggy hardware.
+ * It never returns, and never tries to sync.  We hope that we can at least
+ * dump out some state information...
+ */
+asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason)
+{
+	console_verbose();
+
+	printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason);
+
+	die("Oops - bad mode", regs, 0);
+	local_irq_disable();
+	panic("bad mode");
+}
+
+void __pte_error(const char *file, int line, unsigned long val)
+{
+	printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val);
+}
+
+void __pmd_error(const char *file, int line, unsigned long val)
+{
+	printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val);
+}
+
+void __pgd_error(const char *file, int line, unsigned long val)
+{
+	printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val);
+}
+
+asmlinkage void __div0(void)
+{
+	printk(KERN_DEFAULT "Division by zero in kernel.\n");
+	dump_stack();
+}
+EXPORT_SYMBOL(__div0);
+
+void abort(void)
+{
+	BUG();
+
+	/* if that doesn't kill us, halt */
+	panic("Oops failed to kill thread");
+}
+EXPORT_SYMBOL(abort);
+
+void __init trap_init(void)
+{
+	return;
+}
+
+void __init early_trap_init(void)
+{
+	unsigned long vectors = VECTORS_BASE;
+
+	/*
+	 * Copy the vectors, stubs (in entry-unicore.S)
+	 * into the vector page, mapped at 0xffff0000, and ensure these
+	 * are visible to the instruction stream.
+	 */
+	memcpy((void *)vectors,
+			__vectors_start,
+			__vectors_end - __vectors_start);
+	memcpy((void *)vectors + 0x200,
+			__stubs_start,
+			__stubs_end - __stubs_start);
+
+	early_signal_init();
+
+	flush_icache_range(vectors, vectors + PAGE_SIZE);
+}
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
new file mode 100644
index 00000000..77e407e4
--- /dev/null
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -0,0 +1,62 @@
+/*
+ * linux/arch/unicore32/kernel/vmlinux.lds.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+OUTPUT_ARCH(unicore32)
+ENTRY(stext)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+	. = PAGE_OFFSET + KERNEL_IMAGE_START;
+
+	_text = .;
+	__init_begin = .;
+	HEAD_TEXT_SECTION
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
+	PERCPU_SECTION(L1_CACHE_BYTES)
+	__init_end = .;
+
+	_stext = .;
+	.text : {		/* Real text segment */
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+
+		*(.fixup)
+		*(.gnu.warning)
+	}
+	_etext = .;
+
+	_sdata = .;
+	RO_DATA_SECTION(PAGE_SIZE)
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	_edata = .;
+
+	EXCEPTION_TABLE(L1_CACHE_BYTES)
+	NOTES
+
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
+	DWARF_DEBUG
+
+	DISCARDS		/* Exit code and data */
+}
diff --git a/arch/unicore32/lib/Makefile b/arch/unicore32/lib/Makefile
new file mode 100644
index 00000000..87229a55
--- /dev/null
+++ b/arch/unicore32/lib/Makefile
@@ -0,0 +1,27 @@
+#
+# linux/arch/unicore32/lib/Makefile
+#
+# Copyright (C) 2001-2010 GUAN Xue-tao
+#
+
+lib-y	:= backtrace.o delay.o findbit.o
+lib-y	+= strncpy_from_user.o strnlen_user.o
+lib-y	+= clear_user.o copy_page.o
+lib-y	+= copy_from_user.o copy_to_user.o
+
+GNU_LIBC_A		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libc.a)
+GNU_LIBC_A_OBJS		:= memchr.o memcpy.o memmove.o memset.o
+GNU_LIBC_A_OBJS		+= strchr.o strrchr.o
+GNU_LIBC_A_OBJS		+= rawmemchr.o			# needed by strrchr.o
+
+GNU_LIBGCC_A		:= $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a)
+GNU_LIBGCC_A_OBJS	:= _ashldi3.o _ashrdi3.o _lshrdi3.o
+GNU_LIBGCC_A_OBJS	+= _divsi3.o _modsi3.o _ucmpdi2.o _umodsi3.o _udivsi3.o
+
+lib-y	+= $(GNU_LIBC_A_OBJS) $(GNU_LIBGCC_A_OBJS)
+
+$(addprefix $(obj)/, $(GNU_LIBC_A_OBJS)):
+	$(Q)$(AR) p $(GNU_LIBC_A) $(notdir $@) > $@
+
+$(addprefix $(obj)/, $(GNU_LIBGCC_A_OBJS)):
+	$(Q)$(AR) p $(GNU_LIBGCC_A) $(notdir $@) > $@
diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S
new file mode 100644
index 00000000..ef01d77f
--- /dev/null
+++ b/arch/unicore32/lib/backtrace.S
@@ -0,0 +1,163 @@
+/*
+ * linux/arch/unicore32/lib/backtrace.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+		.text
+
+@ fp is 0 or stack frame
+
+#define frame	v4
+#define sv_fp	v5
+#define sv_pc	v6
+#define offset	v8
+
+ENTRY(__backtrace)
+		mov	r0, fp
+
+ENTRY(c_backtrace)
+
+#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
+		mov	pc, lr
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
+#else
+		stm.w	(v4 - v8, lr), [sp-]	@ Save an extra register
+						@ so we have a location...
+		mov.a	frame, r0		@ if frame pointer is zero
+		beq	no_frame		@ we have no stack frames
+
+1:		stm.w	(pc), [sp-]		@ calculate offset of PC stored
+		ldw.w	r0, [sp]+, #4		@ by stmfd for this CPU
+		adr	r1, 1b
+		sub	offset, r0, r1
+
+/*
+ * Stack frame layout:
+ *             optionally saved caller registers (r4 - r10)
+ *             saved fp
+ *             saved sp
+ *             saved lr
+ *    frame => saved pc
+ *             optionally saved arguments (r0 - r3)
+ * saved sp => <next word>
+ *
+ * Functions start with the following code sequence:
+ *                  mov   ip, sp
+ *                  stm.w (r0 - r3), [sp-] (optional)
+ * corrected pc =>  stm.w sp, (..., fp, ip, lr, pc)
+ */
+for_each_frame:
+
+1001:		ldw	sv_pc, [frame+], #0	@ get saved pc
+1002:		ldw	sv_fp, [frame+], #-12	@ get saved fp
+
+		sub	sv_pc, sv_pc, offset	@ Correct PC for prefetching
+
+1003:		ldw	r2, [sv_pc+], #-4	@ if stmfd sp, {args} exists,
+		ldw	r3, .Ldsi+4		@ adjust saved 'pc' back one
+		cxor.a	r3, r2 >> #14		@ instruction
+		beq	201f
+		sub	r0, sv_pc, #4		@ allow for mov
+		b	202f
+201:
+		sub	r0, sv_pc, #8		@ allow for mov + stmia
+202:
+		ldw	r1, [frame+], #-4	@ get saved lr
+		mov	r2, frame
+		b.l	dump_backtrace_entry
+
+		ldw	r1, [sv_pc+], #-4	@ if stmfd sp, {args} exists,
+		ldw	r3, .Ldsi+4
+		cxor.a	r3, r1 >> #14
+		bne	1004f
+		ldw	r0, [frame+], #-8	@ get sp
+		sub	r0, r0, #4		@ point at the last arg
+		b.l	.Ldumpstm		@ dump saved registers
+
+1004:		ldw	r1, [sv_pc+], #0	@ if stmfd {, fp, ip, lr, pc}
+		ldw	r3, .Ldsi		@ instruction exists,
+		cxor.a	r3, r1 >> #14
+		bne	201f
+		sub	r0, frame, #16
+		b.l	.Ldumpstm		@ dump saved registers
+201:
+		cxor.a	sv_fp, #0		@ zero saved fp means
+		beq	no_frame		@ no further frames
+
+		csub.a	sv_fp, frame		@ next frame must be
+		mov	frame, sv_fp		@ above the current frame
+		bua	for_each_frame
+
+1006:		adr	r0, .Lbad
+		mov	r1, frame
+		b.l	printk
+no_frame:	ldm.w	(v4 - v8, pc), [sp]+
+ENDPROC(__backtrace)
+ENDPROC(c_backtrace)
+
+		.pushsection __ex_table,"a"
+		.align	3
+		.long	1001b, 1006b
+		.long	1002b, 1006b
+		.long	1003b, 1006b
+		.long	1004b, 1006b
+		.popsection
+
+#define instr v4
+#define reg   v5
+#define stack v6
+
+.Ldumpstm:	stm.w	(instr, reg, stack, v7, lr), [sp-]
+		mov	stack, r0
+		mov	instr, r1
+		mov	reg, #14
+		mov	v7, #0
+1:		mov	r3, #1
+		csub.a	reg, #8
+		bne	201f
+		sub	reg, reg, #3
+201:
+		cand.a	instr, r3 << reg
+		beq	2f
+		add	v7, v7, #1
+		cxor.a	v7, #6
+		cmoveq	v7, #1
+		cmoveq	r1, #'\n'
+		cmovne	r1, #' '
+		ldw.w	r3, [stack]+, #-4
+		mov	r2, reg
+		csub.a	r2, #8
+		bsl	201f
+		sub	r2, r2, #3
+201:
+		cand.a	instr, #0x40		@ if H is 1, high 16 regs
+		beq	201f
+		add	r2, r2, #0x10		@ so r2 need add 16
+201:
+		adr	r0, .Lfp
+		b.l	printk
+2:		sub.a	reg, reg, #1
+		bns	1b
+		cxor.a	v7, #0
+		beq	201f
+		adr	r0, .Lcr
+		b.l	printk
+201:		ldm.w	(instr, reg, stack, v7, pc), [sp]+
+
+.Lfp:		.asciz	"%cr%d:%08x"
+.Lcr:		.asciz	"\n"
+.Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
+		.align
+.Ldsi:		.word	0x92eec000 >> 14	@ stm.w sp, (... fp, ip, lr, pc)
+		.word	0x92e10000 >> 14	@ stm.w sp, ()
+
+#endif
diff --git a/arch/unicore32/lib/clear_user.S b/arch/unicore32/lib/clear_user.S
new file mode 100644
index 00000000..20047f72
--- /dev/null
+++ b/arch/unicore32/lib/clear_user.S
@@ -0,0 +1,57 @@
+/*
+ * linux/arch/unicore32/lib/clear_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+		.text
+
+/* Prototype: int __clear_user(void *addr, size_t sz)
+ * Purpose  : clear some user memory
+ * Params   : addr - user memory address to clear
+ *          : sz   - number of bytes to clear
+ * Returns  : number of bytes NOT cleared
+ */
+WEAK(__clear_user)
+		stm.w	(lr), [sp-]
+		stm.w	(r1), [sp-]
+		mov	r2, #0
+		csub.a	r1, #4
+		bsl	2f
+		and.a	ip, r0, #3
+		beq	1f
+		csub.a	ip, #2
+		strusr	r2, r0, 1
+		strusr	r2, r0, 1, el
+		strusr	r2, r0, 1, sl
+		rsub	ip, ip, #4
+		sub	r1, r1, ip		@  7  6  5  4  3  2  1
+1:		sub.a	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
+		strusr	r2, r0, 4, ns, rept=2
+		bns	1b
+		add.a	r1, r1, #4		@  3  2  1  0 -1 -2 -3
+		strusr	r2, r0, 4, ns
+2:		cand.a	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
+		strusr	r2, r0, 1, ne, rept=2
+		cand.a	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+		beq	3f
+USER(		stb.u	r2, [r0])
+3:		mov	r0, #0
+		ldm.w	(r1), [sp]+
+		ldm.w	(pc), [sp]+
+ENDPROC(__clear_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+9001:		ldm.w	(r0), [sp]+
+		ldm.w	(pc), [sp]+
+		.popsection
+
diff --git a/arch/unicore32/lib/copy_from_user.S b/arch/unicore32/lib/copy_from_user.S
new file mode 100644
index 00000000..ab0767ea
--- /dev/null
+++ b/arch/unicore32/lib/copy_from_user.S
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/unicore32/lib/copy_from_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ *	size_t __copy_from_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ *	copy a block to kernel memory from user memory
+ *
+ * Params:
+ *
+ *	to = kernel memory
+ *	from = user memory
+ *	n = number of bytes to copy
+ *
+ * Return value:
+ *
+ *	Number of bytes NOT copied.
+ */
+
+	.macro ldr1w ptr reg abort
+	ldrusr	\reg, \ptr, 4, abort=\abort
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+100:	ldm.w	(\reg1, \reg2, \reg3, \reg4), [\ptr]+
+	.pushsection __ex_table, "a"
+	.align	3
+	.long 100b, \abort
+	.popsection
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+100:	ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+	.pushsection __ex_table, "a"
+	.align	3
+	.long 100b, \abort
+	.popsection
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
+	.endm
+
+	.macro str1w ptr reg abort
+	stw.w \reg, [\ptr]+, #4
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+	.ifnc	\cond, al
+	b\cond	201f
+	b	202f
+	.endif
+201:	stb.w \reg, [\ptr]+, #1
+202:
+	.endm
+
+	.macro enter
+	mov	r3, #0
+	stm.w	(r0, r2, r3), [sp-]
+	.endm
+
+	.macro exit
+	add	sp, sp, #8
+	ldm.w	(r0), [sp]+
+	mov	pc, lr
+	.endm
+
+	.text
+
+ENTRY(__copy_from_user)
+
+#include "copy_template.S"
+
+ENDPROC(__copy_from_user)
+
+	.pushsection .fixup,"ax"
+	.align 0
+	copy_abort_preamble
+	ldm.w	(r1, r2), [sp]+
+	sub	r3, r0, r1
+	rsub	r2, r3, r2
+	stw	r2, [sp]
+	mov	r1, #0
+	b.l	memset
+	ldw.w	r0, [sp]+, #4
+	copy_abort_end
+	.popsection
+
diff --git a/arch/unicore32/lib/copy_page.S b/arch/unicore32/lib/copy_page.S
new file mode 100644
index 00000000..3a448d75
--- /dev/null
+++ b/arch/unicore32/lib/copy_page.S
@@ -0,0 +1,39 @@
+/*
+ * linux/arch/unicore32/lib/copy_page.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  ASM optimised string functions
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <generated/asm-offsets.h>
+#include <asm/cache.h>
+
+#define COPY_COUNT (PAGE_SZ/256)
+
+		.text
+		.align	5
+/*
+ * UniCore optimised copy_page routine
+ */
+ENTRY(copy_page)
+		stm.w	(r17 - r19, lr), [sp-]
+		mov	r17, r0
+		mov	r18, r1
+		mov	r19, #COPY_COUNT
+1:
+	.rept	4
+		ldm.w	(r0 - r15), [r18]+
+		stm.w	(r0 - r15), [r17]+
+	.endr
+		sub.a	r19, r19, #1
+		bne	1b
+		ldm.w	(r17 - r19, pc), [sp]+
+ENDPROC(copy_page)
diff --git a/arch/unicore32/lib/copy_template.S b/arch/unicore32/lib/copy_template.S
new file mode 100644
index 00000000..524287fc
--- /dev/null
+++ b/arch/unicore32/lib/copy_template.S
@@ -0,0 +1,214 @@
+/*
+ * linux/arch/unicore32/lib/copy_template.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Theory of operation
+ * -------------------
+ *
+ * This file provides the core code for a forward memory copy used in
+ * the implementation of memcopy(), copy_to_user() and copy_from_user().
+ *
+ * The including file must define the following accessor macros
+ * according to the need of the given function:
+ *
+ * ldr1w ptr reg abort
+ *
+ *	This loads one word from 'ptr', stores it in 'reg' and increments
+ *	'ptr' to the next word. The 'abort' argument is used for fixup tables.
+ *
+ * ldr4w ptr reg1 reg2 reg3 reg4 abort
+ * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ *
+ *	This loads four or eight words starting from 'ptr', stores them
+ *	in provided registers and increments 'ptr' past those words.
+ *	The'abort' argument is used for fixup tables.
+ *
+ * ldr1b ptr reg cond abort
+ *
+ *	Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
+ *	It also must apply the condition code if provided, otherwise the
+ *	"al" condition is assumed by default.
+ *
+ * str1w ptr reg abort
+ * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+ * str1b ptr reg cond abort
+ *
+ *	Same as their ldr* counterparts, but data is stored to 'ptr' location
+ *	rather than being loaded.
+ *
+ * enter
+ *
+ *	Preserve the provided registers on the stack plus any additional
+ *	data as needed by the implementation including this code. Called
+ *	upon code entry.
+ *
+ * exit
+ *
+ *	Restore registers with the values previously saved with the
+ *	'preserv' macro. Called upon code termination.
+ */
+
+
+		enter
+
+		sub.a	r2, r2, #4
+		bsl	8f
+		and.a	ip, r0, #3
+		bne	9f
+		and.a	ip, r1, #3
+		bne	10f
+
+1:		sub.a	r2, r2, #(28)
+		stm.w	(r5 - r8), [sp-]
+		bsl	5f
+
+3:
+4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
+		sub.a	r2, r2, #32
+		str8w	r0, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
+		beg	3b
+
+5:		and.a	ip, r2, #28
+		rsub	ip, ip, #32
+		beq	7f
+		add	pc, pc, ip		@ C is always clear here
+		nop
+
+		ldr1w	r1, r3, abort=20f
+		ldr1w	r1, r4, abort=20f
+		ldr1w	r1, r5, abort=20f
+		ldr1w	r1, r6, abort=20f
+		ldr1w	r1, r7, abort=20f
+		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, r11, abort=20f
+
+		add	pc, pc, ip
+		nop
+
+		str1w	r0, r3, abort=20f
+		str1w	r0, r4, abort=20f
+		str1w	r0, r5, abort=20f
+		str1w	r0, r6, abort=20f
+		str1w	r0, r7, abort=20f
+		str1w	r0, r8, abort=20f
+		str1w	r0, r11, abort=20f
+
+7:		ldm.w	(r5 - r8), [sp]+
+
+8:		mov.a	r2, r2 << #31
+		ldr1b	r1, r3, ne, abort=21f
+		ldr1b	r1, r4, ea, abort=21f
+		ldr1b	r1, r10, ea, abort=21f
+		str1b	r0, r3, ne, abort=21f
+		str1b	r0, r4, ea, abort=21f
+		str1b	r0, r10, ea, abort=21f
+
+		exit
+
+9:		rsub	ip, ip, #4
+		csub.a	ip, #2
+		ldr1b	r1, r3, sg, abort=21f
+		ldr1b	r1, r4, eg, abort=21f
+		ldr1b	r1, r11, abort=21f
+		str1b	r0, r3, sg, abort=21f
+		str1b	r0, r4, eg, abort=21f
+		sub.a	r2, r2, ip
+		str1b	r0, r11, abort=21f
+		bsl	8b
+		and.a	ip, r1, #3
+		beq	1b
+
+10:		andn	r1, r1, #3
+		csub.a	ip, #2
+		ldr1w	r1, r11, abort=21f
+		beq	17f
+		bsg	18f
+
+
+		.macro	forward_copy_shift a b
+
+		sub.a	r2, r2, #28
+		bsl	14f
+
+11:		stm.w	(r5 - r9), [sp-]
+
+12:
+		ldr4w	r1, r4, r5, r6, r7, abort=19f
+		mov	r3, r11 pull #\a
+		sub.a	r2, r2, #32
+		ldr4w	r1, r8, r9, r10, r11, abort=19f
+		or	r3, r3, r4 push #\b
+		mov	r4, r4 pull #\a
+		or	r4, r4, r5 push #\b
+		mov	r5, r5 pull #\a
+		or	r5, r5, r6 push #\b
+		mov	r6, r6 pull #\a
+		or	r6, r6, r7 push #\b
+		mov	r7, r7 pull #\a
+		or	r7, r7, r8 push #\b
+		mov	r8, r8 pull #\a
+		or	r8, r8, r9 push #\b
+		mov	r9, r9 pull #\a
+		or	r9, r9, r10 push #\b
+		mov	r10, r10 pull #\a
+		or	r10, r10, r11 push #\b
+		str8w	r0, r3, r4, r5, r6, r7, r8, r9, r10, , abort=19f
+		beg	12b
+
+		ldm.w	(r5 - r9), [sp]+
+
+14:		and.a	ip, r2, #28
+		beq	16f
+
+15:		mov	r3, r11 pull #\a
+		ldr1w	r1, r11, abort=21f
+		sub.a	ip, ip, #4
+		or	r3, r3, r11 push #\b
+		str1w	r0, r3, abort=21f
+		bsg	15b
+
+16:		sub	r1, r1, #(\b / 8)
+		b	8b
+
+		.endm
+
+
+		forward_copy_shift	a=8	b=24
+
+17:		forward_copy_shift	a=16	b=16
+
+18:		forward_copy_shift	a=24	b=8
+
+
+/*
+ * Abort preamble and completion macros.
+ * If a fixup handler is required then those macros must surround it.
+ * It is assumed that the fixup code will handle the private part of
+ * the exit macro.
+ */
+
+	.macro	copy_abort_preamble
+19:	ldm.w	(r5 - r9), [sp]+
+	b	21f
+299:	.word	0			@ store lr
+					@ to avoid function call in fixup
+20:	ldm.w	(r5 - r8), [sp]+
+21:
+	adr	r1, 299b
+	stw	lr, [r1]
+	.endm
+
+	.macro	copy_abort_end
+	adr	lr, 299b
+	ldw	pc, [lr]
+	.endm
+
diff --git a/arch/unicore32/lib/copy_to_user.S b/arch/unicore32/lib/copy_to_user.S
new file mode 100644
index 00000000..6e22151c
--- /dev/null
+++ b/arch/unicore32/lib/copy_to_user.S
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/unicore32/lib/copy_to_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Prototype:
+ *
+ *	size_t __copy_to_user(void *to, const void *from, size_t n)
+ *
+ * Purpose:
+ *
+ *	copy a block to user memory from kernel memory
+ *
+ * Params:
+ *
+ *	to = user memory
+ *	from = kernel memory
+ *	n = number of bytes to copy
+ *
+ * Return value:
+ *
+ *	Number of bytes NOT copied.
+ */
+
+	.macro ldr1w ptr reg abort
+	ldw.w \reg, [\ptr]+, #4
+	.endm
+
+	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
+	ldm.w	(\reg1, \reg2, \reg3, \reg4), [\ptr]+
+	.endm
+
+	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+	ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+	.endm
+
+	.macro ldr1b ptr reg cond=al abort
+	notcond	\cond, .+8
+	ldb.w \reg, [\ptr]+, #1
+	.endm
+
+	.macro str1w ptr reg abort
+	strusr	\reg, \ptr, 4, abort=\abort
+	.endm
+
+	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
+100:	stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
+
+	.pushsection __ex_table, "a"
+	.long 100b, \abort
+	.popsection
+	.endm
+
+	.macro str1b ptr reg cond=al abort
+	strusr	\reg, \ptr, 1, \cond, abort=\abort
+	.endm
+
+	.macro enter
+	mov	r3, #0
+	stm.w	(r0, r2, r3), [sp-]
+	.endm
+
+	.macro exit
+	add	sp, sp, #8
+	ldm.w	(r0), [sp]+
+	mov	pc, lr
+	.endm
+
+	.text
+
+WEAK(__copy_to_user)
+
+#include "copy_template.S"
+
+ENDPROC(__copy_to_user)
+
+	.pushsection .fixup,"ax"
+	.align 0
+	copy_abort_preamble
+	ldm.w	(r1, r2, r3), [sp]+
+	sub	r0, r0, r1
+	rsub	r0, r0, r2
+	copy_abort_end
+	.popsection
+
diff --git a/arch/unicore32/lib/delay.S b/arch/unicore32/lib/delay.S
new file mode 100644
index 00000000..24664c00
--- /dev/null
+++ b/arch/unicore32/lib/delay.S
@@ -0,0 +1,51 @@
+/*
+ * linux/arch/unicore32/lib/delay.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/param.h>
+		.text
+
+.LC0:		.word	loops_per_jiffy
+.LC1:		.word	(2199023*HZ)>>11
+
+/*
+ * r0  <= 2000
+ * lpj <= 0x01ffffff (max. 3355 bogomips)
+ * HZ  <= 1000
+ */
+
+ENTRY(__udelay)
+		ldw	r2, .LC1
+		mul	r0, r2, r0
+ENTRY(__const_udelay)				@ 0 <= r0 <= 0x7fffff06
+		ldw	r2, .LC0
+		ldw	r2, [r2]		@ max = 0x01ffffff
+		mov	r0, r0 >> #14		@ max = 0x0001ffff
+		mov	r2, r2 >> #10		@ max = 0x00007fff
+		mul	r0, r2, r0		@ max = 2^32-1
+		mov.a	r0, r0 >> #6
+		cmoveq	pc, lr
+
+/*
+ * loops = r0 * HZ * loops_per_jiffy / 1000000
+ *
+ * Oh, if only we had a cycle counter...
+ */
+
+@ Delay routine
+ENTRY(__delay)
+		sub.a	r0, r0, #2
+		bua	__delay
+		mov	pc, lr
+ENDPROC(__udelay)
+ENDPROC(__const_udelay)
+ENDPROC(__delay)
diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S
new file mode 100644
index 00000000..c7774624
--- /dev/null
+++ b/arch/unicore32/lib/findbit.S
@@ -0,0 +1,100 @@
+/*
+ * linux/arch/unicore32/lib/findbit.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+                .text
+
+/*
+ * Purpose  : Find a 'zero' bit
+ * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
+ */
+ENTRY(find_first_zero_bit)
+		cxor.a	r1, #0
+		beq	3f
+		mov	r2, #0
+1:		ldb	r3, [r0+], r2 >> #3
+		xor.a	r3, r3, #0xff		@ invert bits
+		bne	.L_found		@ any now set - found zero bit
+		add	r2, r2, #8		@ next bit pointer
+2:		csub.a	r2, r1			@ any more?
+		bub	1b
+3:		mov	r0, r1			@ no free bits
+		mov	pc, lr
+ENDPROC(find_first_zero_bit)
+
+/*
+ * Purpose  : Find next 'zero' bit
+ * Prototype: int find_next_zero_bit
+ *		(void *addr, unsigned int maxbit, int offset)
+ */
+ENTRY(find_next_zero_bit)
+		cxor.a	r1, #0
+		beq	3b
+		and.a	ip, r2, #7
+		beq	1b			@ If new byte, goto old routine
+		ldb	r3, [r0+], r2 >> #3
+		xor	r3, r3, #0xff		@ now looking for a 1 bit
+		mov.a	r3, r3 >> ip		@ shift off unused bits
+		bne	.L_found
+		or	r2, r2, #7		@ if zero, then no bits here
+		add	r2, r2, #1		@ align bit pointer
+		b	2b			@ loop for next bit
+ENDPROC(find_next_zero_bit)
+
+/*
+ * Purpose  : Find a 'one' bit
+ * Prototype: int find_first_bit
+ *		(const unsigned long *addr, unsigned int maxbit);
+ */
+ENTRY(find_first_bit)
+		cxor.a	r1, #0
+		beq	3f
+		mov	r2, #0
+1:		ldb	r3, [r0+], r2 >> #3
+		mov.a	r3, r3
+		bne	.L_found		@ any now set - found zero bit
+		add	r2, r2, #8		@ next bit pointer
+2:		csub.a	r2, r1			@ any more?
+		bub	1b
+3:		mov	r0, r1			@ no free bits
+		mov	pc, lr
+ENDPROC(find_first_bit)
+
+/*
+ * Purpose  : Find next 'one' bit
+ * Prototype: int find_next_zero_bit
+ *		(void *addr, unsigned int maxbit, int offset)
+ */
+ENTRY(find_next_bit)
+		cxor.a	r1, #0
+		beq	3b
+		and.a	ip, r2, #7
+		beq	1b			@ If new byte, goto old routine
+		ldb	r3, [r0+], r2 >> #3
+		mov.a	r3, r3 >> ip		@ shift off unused bits
+		bne	.L_found
+		or	r2, r2, #7		@ if zero, then no bits here
+		add	r2, r2, #1		@ align bit pointer
+		b	2b			@ loop for next bit
+ENDPROC(find_next_bit)
+
+/*
+ * One or more bits in the LSB of r3 are assumed to be set.
+ */
+.L_found:
+		rsub	r1, r3, #0
+		and	r3, r3, r1
+		cntlz	r3, r3
+		rsub	r3, r3, #31
+		add	r0, r2, r3
+		mov	pc, lr
+
diff --git a/arch/unicore32/lib/strncpy_from_user.S b/arch/unicore32/lib/strncpy_from_user.S
new file mode 100644
index 00000000..ff6c304d
--- /dev/null
+++ b/arch/unicore32/lib/strncpy_from_user.S
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/unicore32/lib/strncpy_from_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+	.text
+	.align	5
+
+/*
+ * Copy a string from user space to kernel space.
+ *  r0 = dst, r1 = src, r2 = byte length
+ * returns the number of characters copied (strlen of copied string),
+ *  -EFAULT on exception, or "len" if we fill the whole buffer
+ */
+ENTRY(__strncpy_from_user)
+	mov	ip, r1
+1:	sub.a	r2, r2, #1
+	ldrusr	r3, r1, 1, ns
+	bfs	2f
+	stb.w	r3, [r0]+, #1
+	cxor.a	r3, #0
+	bne	1b
+	sub	r1, r1, #1	@ take NUL character out of count
+2:	sub	r0, r1, ip
+	mov	pc, lr
+ENDPROC(__strncpy_from_user)
+
+	.pushsection .fixup,"ax"
+	.align	0
+9001:	mov	r3, #0
+	stb	r3, [r0+], #0	@ null terminate
+	mov	r0, #-EFAULT
+	mov	pc, lr
+	.popsection
+
diff --git a/arch/unicore32/lib/strnlen_user.S b/arch/unicore32/lib/strnlen_user.S
new file mode 100644
index 00000000..75863030
--- /dev/null
+++ b/arch/unicore32/lib/strnlen_user.S
@@ -0,0 +1,42 @@
+/*
+ * linux/arch/unicore32/lib/strnlen_user.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+
+	.text
+	.align	5
+
+/* Prototype: unsigned long __strnlen_user(const char *str, long n)
+ * Purpose  : get length of a string in user memory
+ * Params   : str - address of string in user memory
+ * Returns  : length of string *including terminator*
+ *	      or zero on exception, or n + 1 if too long
+ */
+ENTRY(__strnlen_user)
+	mov	r2, r0
+1:
+	ldrusr	r3, r0, 1
+	cxor.a	r3, #0
+	beq	2f
+	sub.a	r1, r1, #1
+	bne	1b
+	add	r0, r0, #1
+2:	sub	r0, r0, r2
+	mov	pc, lr
+ENDPROC(__strnlen_user)
+
+	.pushsection .fixup,"ax"
+	.align	0
+9001:	mov	r0, #0
+	mov	pc, lr
+	.popsection
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
new file mode 100644
index 00000000..5f77fb3c
--- /dev/null
+++ b/arch/unicore32/mm/Kconfig
@@ -0,0 +1,50 @@
+comment "Processor Type"
+
+# Select CPU types depending on the architecture selected.  This selects
+# which CPUs we support in the kernel image, and the compiler instruction
+# optimiser behaviour.
+
+config CPU_UCV2
+	def_bool y
+
+comment "Processor Features"
+
+config CPU_ICACHE_DISABLE
+	bool "Disable I-Cache (I-bit)"
+	help
+	  Say Y here to disable the processor instruction cache. Unless
+	  you have a reason not to or are unsure, say N.
+
+config CPU_DCACHE_DISABLE
+	bool "Disable D-Cache (D-bit)"
+	help
+	  Say Y here to disable the processor data cache. Unless
+	  you have a reason not to or are unsure, say N.
+
+config CPU_DCACHE_WRITETHROUGH
+	bool "Force write through D-cache"
+	help
+	  Say Y here to use the data cache in writethrough mode. Unless you
+	  specifically require this or are unsure, say N.
+
+config CPU_DCACHE_LINE_DISABLE
+	bool "Disable D-cache line ops"
+	default y
+	help
+	  Say Y here to disable the data cache line operations.
+
+config CPU_TLB_SINGLE_ENTRY_DISABLE
+	bool "Disable TLB single entry ops"
+	default y
+	help
+	  Say Y here to disable the TLB single entry operations.
+
+config SWIOTLB
+	def_bool y
+
+config IOMMU_HELPER
+	def_bool SWIOTLB
+
+config NEED_SG_DMA_LENGTH
+	def_bool SWIOTLB
+
diff --git a/arch/unicore32/mm/Makefile b/arch/unicore32/mm/Makefile
new file mode 100644
index 00000000..46c16669
--- /dev/null
+++ b/arch/unicore32/mm/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the linux unicore-specific parts of the memory manager.
+#
+
+obj-y				:= extable.o fault.o init.o pgd.o mmu.o
+obj-y				+= flush.o ioremap.o
+
+obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
+
+obj-$(CONFIG_MODULES)		+= proc-syms.o
+
+obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
+
+obj-$(CONFIG_CPU_UCV2)		+= cache-ucv2.o tlb-ucv2.o proc-ucv2.o
+
diff --git a/arch/unicore32/mm/alignment.c b/arch/unicore32/mm/alignment.c
new file mode 100644
index 00000000..de7dc5fd
--- /dev/null
+++ b/arch/unicore32/mm/alignment.c
@@ -0,0 +1,525 @@
+/*
+ * linux/arch/unicore32/mm/alignment.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * TODO:
+ *  FPU ldm/stm not handling
+ */
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+
+#include <asm/tlbflush.h>
+#include <asm/unaligned.h>
+
+#include "mm.h"
+
+#define CODING_BITS(i)	(i & 0xe0000120)
+
+#define LDST_P_BIT(i)	(i & (1 << 28))	/* Preindex             */
+#define LDST_U_BIT(i)	(i & (1 << 27))	/* Add offset           */
+#define LDST_W_BIT(i)	(i & (1 << 25))	/* Writeback            */
+#define LDST_L_BIT(i)	(i & (1 << 24))	/* Load                 */
+
+#define LDST_P_EQ_U(i)	((((i) ^ ((i) >> 1)) & (1 << 27)) == 0)
+
+#define LDSTH_I_BIT(i)	(i & (1 << 26))	/* half-word immed      */
+#define LDM_S_BIT(i)	(i & (1 << 26))	/* write ASR from BSR */
+#define LDM_H_BIT(i)	(i & (1 << 6))	/* select r0-r15 or r16-r31 */
+
+#define RN_BITS(i)	((i >> 19) & 31)	/* Rn                   */
+#define RD_BITS(i)	((i >> 14) & 31)	/* Rd                   */
+#define RM_BITS(i)	(i & 31)	/* Rm                   */
+
+#define REGMASK_BITS(i)	(((i & 0x7fe00) >> 3) | (i & 0x3f))
+#define OFFSET_BITS(i)	(i & 0x03fff)
+
+#define SHIFT_BITS(i)	((i >> 9) & 0x1f)
+#define SHIFT_TYPE(i)	(i & 0xc0)
+#define SHIFT_LSL	0x00
+#define SHIFT_LSR	0x40
+#define SHIFT_ASR	0x80
+#define SHIFT_RORRRX	0xc0
+
+union offset_union {
+	unsigned long un;
+	signed long sn;
+};
+
+#define TYPE_ERROR	0
+#define TYPE_FAULT	1
+#define TYPE_LDST	2
+#define TYPE_DONE	3
+#define TYPE_SWAP  4
+#define TYPE_COLS  5		/* Coprocessor load/store */
+
+#define get8_unaligned_check(val, addr, err)		\
+	__asm__(					\
+	"1:	ldb.u	%1, [%2], #1\n"			\
+	"2:\n"						\
+	"	.pushsection .fixup,\"ax\"\n"		\
+	"	.align	2\n"				\
+	"3:	mov	%0, #1\n"			\
+	"	b	2b\n"				\
+	"	.popsection\n"				\
+	"	.pushsection __ex_table,\"a\"\n"		\
+	"	.align	3\n"				\
+	"	.long	1b, 3b\n"			\
+	"	.popsection\n"				\
+	: "=r" (err), "=&r" (val), "=r" (addr)		\
+	: "0" (err), "2" (addr))
+
+#define get8t_unaligned_check(val, addr, err)		\
+	__asm__(					\
+	"1:	ldb.u	%1, [%2], #1\n"			\
+	"2:\n"						\
+	"	.pushsection .fixup,\"ax\"\n"		\
+	"	.align	2\n"				\
+	"3:	mov	%0, #1\n"			\
+	"	b	2b\n"				\
+	"	.popsection\n"				\
+	"	.pushsection __ex_table,\"a\"\n"		\
+	"	.align	3\n"				\
+	"	.long	1b, 3b\n"			\
+	"	.popsection\n"				\
+	: "=r" (err), "=&r" (val), "=r" (addr)		\
+	: "0" (err), "2" (addr))
+
+#define get16_unaligned_check(val, addr)			\
+	do {							\
+		unsigned int err = 0, v, a = addr;		\
+		get8_unaligned_check(val, a, err);		\
+		get8_unaligned_check(v, a, err);		\
+		val |= v << 8;					\
+		if (err)					\
+			goto fault;				\
+	} while (0)
+
+#define put16_unaligned_check(val, addr)			\
+	do {							\
+		unsigned int err = 0, v = val, a = addr;	\
+		__asm__(					\
+		"1:	stb.u	%1, [%2], #1\n"			\
+		"	mov	%1, %1 >> #8\n"			\
+		"2:	stb.u	%1, [%2]\n"			\
+		"3:\n"						\
+		"	.pushsection .fixup,\"ax\"\n"		\
+		"	.align	2\n"				\
+		"4:	mov	%0, #1\n"			\
+		"	b	3b\n"				\
+		"	.popsection\n"				\
+		"	.pushsection __ex_table,\"a\"\n"		\
+		"	.align	3\n"				\
+		"	.long	1b, 4b\n"			\
+		"	.long	2b, 4b\n"			\
+		"	.popsection\n"				\
+		: "=r" (err), "=&r" (v), "=&r" (a)		\
+		: "0" (err), "1" (v), "2" (a));			\
+		if (err)					\
+			goto fault;				\
+	} while (0)
+
+#define __put32_unaligned_check(ins, val, addr)			\
+	do {							\
+		unsigned int err = 0, v = val, a = addr;	\
+		__asm__(					\
+		"1:	"ins"	%1, [%2], #1\n"			\
+		"	mov	%1, %1 >> #8\n"			\
+		"2:	"ins"	%1, [%2], #1\n"			\
+		"	mov	%1, %1 >> #8\n"			\
+		"3:	"ins"	%1, [%2], #1\n"			\
+		"	mov	%1, %1 >> #8\n"			\
+		"4:	"ins"	%1, [%2]\n"			\
+		"5:\n"						\
+		"	.pushsection .fixup,\"ax\"\n"		\
+		"	.align	2\n"				\
+		"6:	mov	%0, #1\n"			\
+		"	b	5b\n"				\
+		"	.popsection\n"				\
+		"	.pushsection __ex_table,\"a\"\n"		\
+		"	.align	3\n"				\
+		"	.long	1b, 6b\n"			\
+		"	.long	2b, 6b\n"			\
+		"	.long	3b, 6b\n"			\
+		"	.long	4b, 6b\n"			\
+		"	.popsection\n"				\
+		: "=r" (err), "=&r" (v), "=&r" (a)		\
+		: "0" (err), "1" (v), "2" (a));			\
+		if (err)					\
+			goto fault;				\
+	} while (0)
+
+#define get32_unaligned_check(val, addr)			\
+	do {							\
+		unsigned int err = 0, v, a = addr;		\
+		get8_unaligned_check(val, a, err);		\
+		get8_unaligned_check(v, a, err);		\
+		val |= v << 8;					\
+		get8_unaligned_check(v, a, err);		\
+		val |= v << 16;					\
+		get8_unaligned_check(v, a, err);		\
+		val |= v << 24;					\
+		if (err)					\
+			goto fault;				\
+	} while (0)
+
+#define put32_unaligned_check(val, addr)			\
+	__put32_unaligned_check("stb.u", val, addr)
+
+#define get32t_unaligned_check(val, addr)			\
+	do {							\
+		unsigned int err = 0, v, a = addr;		\
+		get8t_unaligned_check(val, a, err);		\
+		get8t_unaligned_check(v, a, err);		\
+		val |= v << 8;					\
+		get8t_unaligned_check(v, a, err);		\
+		val |= v << 16;					\
+		get8t_unaligned_check(v, a, err);		\
+		val |= v << 24;					\
+		if (err)					\
+			goto fault;				\
+	} while (0)
+
+#define put32t_unaligned_check(val, addr)			\
+	__put32_unaligned_check("stb.u", val, addr)
+
+static void
+do_alignment_finish_ldst(unsigned long addr, unsigned long instr,
+			 struct pt_regs *regs, union offset_union offset)
+{
+	if (!LDST_U_BIT(instr))
+		offset.un = -offset.un;
+
+	if (!LDST_P_BIT(instr))
+		addr += offset.un;
+
+	if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
+		regs->uregs[RN_BITS(instr)] = addr;
+}
+
+static int
+do_alignment_ldrhstrh(unsigned long addr, unsigned long instr,
+		      struct pt_regs *regs)
+{
+	unsigned int rd = RD_BITS(instr);
+
+	/* old value 0x40002120, can't judge swap instr correctly */
+	if ((instr & 0x4b003fe0) == 0x40000120)
+		goto swp;
+
+	if (LDST_L_BIT(instr)) {
+		unsigned long val;
+		get16_unaligned_check(val, addr);
+
+		/* signed half-word? */
+		if (instr & 0x80)
+			val = (signed long)((signed short)val);
+
+		regs->uregs[rd] = val;
+	} else
+		put16_unaligned_check(regs->uregs[rd], addr);
+
+	return TYPE_LDST;
+
+swp:
+	/* only handle swap word
+	 * for swap byte should not active this alignment exception */
+	get32_unaligned_check(regs->uregs[RD_BITS(instr)], addr);
+	put32_unaligned_check(regs->uregs[RM_BITS(instr)], addr);
+	return TYPE_SWAP;
+
+fault:
+	return TYPE_FAULT;
+}
+
+static int
+do_alignment_ldrstr(unsigned long addr, unsigned long instr,
+		    struct pt_regs *regs)
+{
+	unsigned int rd = RD_BITS(instr);
+
+	if (!LDST_P_BIT(instr) && LDST_W_BIT(instr))
+		goto trans;
+
+	if (LDST_L_BIT(instr))
+		get32_unaligned_check(regs->uregs[rd], addr);
+	else
+		put32_unaligned_check(regs->uregs[rd], addr);
+	return TYPE_LDST;
+
+trans:
+	if (LDST_L_BIT(instr))
+		get32t_unaligned_check(regs->uregs[rd], addr);
+	else
+		put32t_unaligned_check(regs->uregs[rd], addr);
+	return TYPE_LDST;
+
+fault:
+	return TYPE_FAULT;
+}
+
+/*
+ * LDM/STM alignment handler.
+ *
+ * There are 4 variants of this instruction:
+ *
+ * B = rn pointer before instruction, A = rn pointer after instruction
+ *              ------ increasing address ----->
+ *	        |    | r0 | r1 | ... | rx |    |
+ * PU = 01             B                    A
+ * PU = 11        B                    A
+ * PU = 00        A                    B
+ * PU = 10             A                    B
+ */
+static int
+do_alignment_ldmstm(unsigned long addr, unsigned long instr,
+		    struct pt_regs *regs)
+{
+	unsigned int rd, rn, pc_correction, reg_correction, nr_regs, regbits;
+	unsigned long eaddr, newaddr;
+
+	if (LDM_S_BIT(instr))
+		goto bad;
+
+	pc_correction = 4;	/* processor implementation defined */
+
+	/* count the number of registers in the mask to be transferred */
+	nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
+
+	rn = RN_BITS(instr);
+	newaddr = eaddr = regs->uregs[rn];
+
+	if (!LDST_U_BIT(instr))
+		nr_regs = -nr_regs;
+	newaddr += nr_regs;
+	if (!LDST_U_BIT(instr))
+		eaddr = newaddr;
+
+	if (LDST_P_EQ_U(instr))	/* U = P */
+		eaddr += 4;
+
+	/*
+	 * This is a "hint" - we already have eaddr worked out by the
+	 * processor for us.
+	 */
+	if (addr != eaddr) {
+		printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, "
+		       "addr = %08lx, eaddr = %08lx\n",
+		       instruction_pointer(regs), instr, addr, eaddr);
+		show_regs(regs);
+	}
+
+	if (LDM_H_BIT(instr))
+		reg_correction = 0x10;
+	else
+		reg_correction = 0x00;
+
+	for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
+	     regbits >>= 1, rd += 1)
+		if (regbits & 1) {
+			if (LDST_L_BIT(instr))
+				get32_unaligned_check(regs->
+					uregs[rd + reg_correction], eaddr);
+			else
+				put32_unaligned_check(regs->
+					uregs[rd + reg_correction], eaddr);
+			eaddr += 4;
+		}
+
+	if (LDST_W_BIT(instr))
+		regs->uregs[rn] = newaddr;
+	return TYPE_DONE;
+
+fault:
+	regs->UCreg_pc -= pc_correction;
+	return TYPE_FAULT;
+
+bad:
+	printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n");
+	return TYPE_ERROR;
+}
+
+static int
+do_alignment(unsigned long addr, unsigned int error_code, struct pt_regs *regs)
+{
+	union offset_union offset;
+	unsigned long instr, instrptr;
+	int (*handler) (unsigned long addr, unsigned long instr,
+			struct pt_regs *regs);
+	unsigned int type;
+
+	instrptr = instruction_pointer(regs);
+	if (instrptr >= PAGE_OFFSET)
+		instr = *(unsigned long *)instrptr;
+	else {
+		__asm__ __volatile__(
+				"ldw.u	%0, [%1]\n"
+				: "=&r"(instr)
+				: "r"(instrptr));
+	}
+
+	regs->UCreg_pc += 4;
+
+	switch (CODING_BITS(instr)) {
+	case 0x40000120:	/* ldrh or strh */
+		if (LDSTH_I_BIT(instr))
+			offset.un = (instr & 0x3e00) >> 4 | (instr & 31);
+		else
+			offset.un = regs->uregs[RM_BITS(instr)];
+		handler = do_alignment_ldrhstrh;
+		break;
+
+	case 0x60000000:	/* ldr or str immediate */
+	case 0x60000100:	/* ldr or str immediate */
+	case 0x60000020:	/* ldr or str immediate */
+	case 0x60000120:	/* ldr or str immediate */
+		offset.un = OFFSET_BITS(instr);
+		handler = do_alignment_ldrstr;
+		break;
+
+	case 0x40000000:	/* ldr or str register */
+		offset.un = regs->uregs[RM_BITS(instr)];
+		{
+			unsigned int shiftval = SHIFT_BITS(instr);
+
+			switch (SHIFT_TYPE(instr)) {
+			case SHIFT_LSL:
+				offset.un <<= shiftval;
+				break;
+
+			case SHIFT_LSR:
+				offset.un >>= shiftval;
+				break;
+
+			case SHIFT_ASR:
+				offset.sn >>= shiftval;
+				break;
+
+			case SHIFT_RORRRX:
+				if (shiftval == 0) {
+					offset.un >>= 1;
+					if (regs->UCreg_asr & PSR_C_BIT)
+						offset.un |= 1 << 31;
+				} else
+					offset.un = offset.un >> shiftval |
+					    offset.un << (32 - shiftval);
+				break;
+			}
+		}
+		handler = do_alignment_ldrstr;
+		break;
+
+	case 0x80000000:	/* ldm or stm */
+	case 0x80000020:	/* ldm or stm */
+		handler = do_alignment_ldmstm;
+		break;
+
+	default:
+		goto bad;
+	}
+
+	type = handler(addr, instr, regs);
+
+	if (type == TYPE_ERROR || type == TYPE_FAULT)
+		goto bad_or_fault;
+
+	if (type == TYPE_LDST)
+		do_alignment_finish_ldst(addr, instr, regs, offset);
+
+	return 0;
+
+bad_or_fault:
+	if (type == TYPE_ERROR)
+		goto bad;
+	regs->UCreg_pc -= 4;
+	/*
+	 * We got a fault - fix it up, or die.
+	 */
+	do_bad_area(addr, error_code, regs);
+	return 0;
+
+bad:
+	/*
+	 * Oops, we didn't handle the instruction.
+	 * However, we must handle fpu instr firstly.
+	 */
+#ifdef CONFIG_UNICORE_FPU_F64
+	/* handle co.load/store */
+#define CODING_COLS                0xc0000000
+#define COLS_OFFSET_BITS(i)	(i & 0x1FF)
+#define COLS_L_BITS(i)		(i & (1<<24))
+#define COLS_FN_BITS(i)		((i>>14) & 31)
+	if ((instr & 0xe0000000) == CODING_COLS) {
+		unsigned int fn = COLS_FN_BITS(instr);
+		unsigned long val = 0;
+		if (COLS_L_BITS(instr)) {
+			get32t_unaligned_check(val, addr);
+			switch (fn) {
+#define ASM_MTF(n)	case n:						\
+			__asm__ __volatile__("MTF %0, F" __stringify(n)	\
+				: : "r"(val));				\
+			break;
+			ASM_MTF(0); ASM_MTF(1); ASM_MTF(2); ASM_MTF(3);
+			ASM_MTF(4); ASM_MTF(5); ASM_MTF(6); ASM_MTF(7);
+			ASM_MTF(8); ASM_MTF(9); ASM_MTF(10); ASM_MTF(11);
+			ASM_MTF(12); ASM_MTF(13); ASM_MTF(14); ASM_MTF(15);
+			ASM_MTF(16); ASM_MTF(17); ASM_MTF(18); ASM_MTF(19);
+			ASM_MTF(20); ASM_MTF(21); ASM_MTF(22); ASM_MTF(23);
+			ASM_MTF(24); ASM_MTF(25); ASM_MTF(26); ASM_MTF(27);
+			ASM_MTF(28); ASM_MTF(29); ASM_MTF(30); ASM_MTF(31);
+#undef ASM_MTF
+			}
+		} else {
+			switch (fn) {
+#define ASM_MFF(n)	case n:						\
+			__asm__ __volatile__("MFF %0, F" __stringify(n)	\
+				: : "r"(val));				\
+			break;
+			ASM_MFF(0); ASM_MFF(1); ASM_MFF(2); ASM_MFF(3);
+			ASM_MFF(4); ASM_MFF(5); ASM_MFF(6); ASM_MFF(7);
+			ASM_MFF(8); ASM_MFF(9); ASM_MFF(10); ASM_MFF(11);
+			ASM_MFF(12); ASM_MFF(13); ASM_MFF(14); ASM_MFF(15);
+			ASM_MFF(16); ASM_MFF(17); ASM_MFF(18); ASM_MFF(19);
+			ASM_MFF(20); ASM_MFF(21); ASM_MFF(22); ASM_MFF(23);
+			ASM_MFF(24); ASM_MFF(25); ASM_MFF(26); ASM_MFF(27);
+			ASM_MFF(28); ASM_MFF(29); ASM_MFF(30); ASM_MFF(31);
+#undef ASM_MFF
+			}
+			put32t_unaligned_check(val, addr);
+		}
+		return TYPE_COLS;
+	}
+fault:
+	return TYPE_FAULT;
+#endif
+	printk(KERN_ERR "Alignment trap: not handling instruction "
+	       "%08lx at [<%08lx>]\n", instr, instrptr);
+	return 1;
+}
+
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten.  Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ */
+static int __init alignment_init(void)
+{
+	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+			"alignment exception");
+
+	return 0;
+}
+
+fs_initcall(alignment_init);
diff --git a/arch/unicore32/mm/cache-ucv2.S b/arch/unicore32/mm/cache-ucv2.S
new file mode 100644
index 00000000..ecaa1727
--- /dev/null
+++ b/arch/unicore32/mm/cache-ucv2.S
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/unicore32/mm/cache-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This is the "shell" of the UniCore-v2 processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+#include "proc-macros.S"
+
+/*
+ *	__cpuc_flush_icache_all()
+ *	__cpuc_flush_kern_all()
+ *	__cpuc_flush_user_all()
+ *
+ *	Flush the entire cache.
+ */
+ENTRY(__cpuc_flush_icache_all)
+	/*FALLTHROUGH*/
+ENTRY(__cpuc_flush_kern_all)
+	/*FALLTHROUGH*/
+ENTRY(__cpuc_flush_user_all)
+	mov	r0, #0
+	movc	p0.c5, r0, #14			@ Dcache flush all
+	nop8
+
+	mov	r0, #0
+	movc	p0.c5, r0, #20			@ Icache invalidate all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	__cpuc_flush_user_range(start, end, flags)
+ *
+ *	Flush a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- flags	- vm_area_struct flags describing address space
+ */
+ENTRY(__cpuc_flush_user_range)
+	cxor.a	r2, #0
+	beq	__cpuc_dma_flush_range
+
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	andn	r0, r0, #CACHE_LINESIZE - 1	@ Safety check
+	sub	r1, r1, r0
+	csub.a	r1, #MAX_AREA_SIZE
+	bsg	2f
+
+	andn	r1, r1, #CACHE_LINESIZE - 1
+	add	r1, r1, #CACHE_LINESIZE
+
+101:	dcacheline_flush	r0, r11, r12
+
+	add	r0, r0, #CACHE_LINESIZE
+	sub.a	r1, r1, #CACHE_LINESIZE
+	bns	101b
+	b	3f
+#endif
+2:	mov	ip, #0
+	movc	p0.c5, ip, #14			@ Dcache flush all
+	nop8
+
+3:	mov	ip, #0
+	movc	p0.c5, ip, #20			@ Icache invalidate all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	__cpuc_coherent_kern_range(start,end)
+ *	__cpuc_coherent_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(__cpuc_coherent_kern_range)
+	/* FALLTHROUGH */
+ENTRY(__cpuc_coherent_user_range)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	andn	r0, r0, #CACHE_LINESIZE - 1	@ Safety check
+	sub	r1, r1, r0
+	csub.a	r1, #MAX_AREA_SIZE
+	bsg	2f
+
+	andn	r1, r1, #CACHE_LINESIZE - 1
+	add	r1, r1, #CACHE_LINESIZE
+
+	@ r0 va2pa r10
+	mov	r9, #PAGE_SZ
+	sub	r9, r9, #1			@ PAGE_MASK
+101:	va2pa	r0, r10, r11, r12, r13, 2f	@ r10 is PA
+	b	103f
+102:	cand.a	r0, r9
+	beq	101b
+
+103:	movc	p0.c5, r10, #11			@ Dcache clean line of R10
+	nop8
+
+	add	r0, r0, #CACHE_LINESIZE
+	add	r10, r10, #CACHE_LINESIZE
+	sub.a	r1, r1, #CACHE_LINESIZE
+	bns	102b
+	b	3f
+#endif
+2:	mov	ip, #0
+	movc	p0.c5, ip, #10			@ Dcache clean all
+	nop8
+
+3:	mov	ip, #0
+	movc	p0.c5, ip, #20			@ Icache invalidate all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	__cpuc_flush_kern_dcache_area(void *addr, size_t size)
+ *
+ *	- addr	- kernel address
+ *	- size	- region size
+ */
+ENTRY(__cpuc_flush_kern_dcache_area)
+	mov	ip, #0
+	movc	p0.c5, ip, #14			@ Dcache flush all
+	nop8
+	mov	pc, lr
+
+/*
+ *	__cpuc_dma_clean_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(__cpuc_dma_clean_range)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	andn	r0, r0, #CACHE_LINESIZE - 1
+	sub	r1, r1, r0
+	andn	r1, r1, #CACHE_LINESIZE - 1
+	add	r1, r1, #CACHE_LINESIZE
+
+	csub.a	r1, #MAX_AREA_SIZE
+	bsg	2f
+
+	@ r0 va2pa r10
+	mov	r9, #PAGE_SZ
+	sub	r9, r9, #1			@ PAGE_MASK
+101:	va2pa	r0, r10, r11, r12, r13, 2f	@ r10 is PA
+	b	1f
+102:	cand.a	r0, r9
+	beq	101b
+
+1:	movc	p0.c5, r10, #11			@ Dcache clean line of R10
+	nop8
+	add	r0, r0, #CACHE_LINESIZE
+	add	r10, r10, #CACHE_LINESIZE
+	sub.a	r1, r1, #CACHE_LINESIZE
+	bns	102b
+	mov	pc, lr
+#endif
+2:	mov	ip, #0
+	movc	p0.c5, ip, #10			@ Dcache clean all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	__cpuc_dma_inv_range(start,end)
+ *	__cpuc_dma_flush_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+__cpuc_dma_inv_range:
+	/* FALLTHROUGH */
+ENTRY(__cpuc_dma_flush_range)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	andn	r0, r0, #CACHE_LINESIZE - 1
+	sub	r1, r1, r0
+	andn	r1, r1, #CACHE_LINESIZE - 1
+	add	r1, r1, #CACHE_LINESIZE
+
+	csub.a	r1, #MAX_AREA_SIZE
+	bsg	2f
+
+	@ r0 va2pa r10
+101:	dcacheline_flush	r0, r11, r12
+
+	add	r0, r0, #CACHE_LINESIZE
+	sub.a	r1, r1, #CACHE_LINESIZE
+	bns	101b
+	mov	pc, lr
+#endif
+2:	mov	ip, #0
+	movc	p0.c5, ip, #14			@ Dcache flush all
+	nop8
+
+	mov	pc, lr
+
diff --git a/arch/unicore32/mm/dma-swiotlb.c b/arch/unicore32/mm/dma-swiotlb.c
new file mode 100644
index 00000000..16c08b21
--- /dev/null
+++ b/arch/unicore32/mm/dma-swiotlb.c
@@ -0,0 +1,48 @@
+/*
+ * Contains routines needed to support swiotlb for UniCore32.
+ *
+ * Copyright (C) 2010 Guan Xuetao
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/cache.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/swiotlb.h>
+#include <linux/bootmem.h>
+
+#include <asm/dma.h>
+
+static void *unicore_swiotlb_alloc_coherent(struct device *dev, size_t size,
+					    dma_addr_t *dma_handle, gfp_t flags,
+					    struct dma_attrs *attrs)
+{
+	return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
+}
+
+static void unicore_swiotlb_free_coherent(struct device *dev, size_t size,
+					  void *vaddr, dma_addr_t dma_addr,
+					  struct dma_attrs *attrs)
+{
+	swiotlb_free_coherent(dev, size, vaddr, dma_addr);
+}
+
+struct dma_map_ops swiotlb_dma_map_ops = {
+	.alloc = unicore_swiotlb_alloc_coherent,
+	.free = unicore_swiotlb_free_coherent,
+	.map_sg = swiotlb_map_sg_attrs,
+	.unmap_sg = swiotlb_unmap_sg_attrs,
+	.dma_supported = swiotlb_dma_supported,
+	.map_page = swiotlb_map_page,
+	.unmap_page = swiotlb_unmap_page,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
+	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.mapping_error = swiotlb_dma_mapping_error,
+};
+EXPORT_SYMBOL(swiotlb_dma_map_ops);
diff --git a/arch/unicore32/mm/extable.c b/arch/unicore32/mm/extable.c
new file mode 100644
index 00000000..6564180e
--- /dev/null
+++ b/arch/unicore32/mm/extable.c
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/unicore32/mm/extable.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(instruction_pointer(regs));
+	if (fixup)
+		regs->UCreg_pc = fixup->fixup;
+
+	return fixup != NULL;
+}
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
new file mode 100644
index 00000000..2eeb9c04
--- /dev/null
+++ b/arch/unicore32/mm/fault.c
@@ -0,0 +1,478 @@
+/*
+ * linux/arch/unicore32/mm/fault.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/mm.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/io.h>
+
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF		(1 << 31)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+	/* xyabcde will be abcde+xy */
+	return (fsr & 31) + ((fsr & (3 << 5)) >> 5);
+}
+
+/*
+ * This is useful to dump out the page tables associated with
+ * 'addr' in mm 'mm'.
+ */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{
+	pgd_t *pgd;
+
+	if (!mm)
+		mm = &init_mm;
+
+	printk(KERN_ALERT "pgd = %p\n", mm->pgd);
+	pgd = pgd_offset(mm, addr);
+	printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
+
+	do {
+		pmd_t *pmd;
+		pte_t *pte;
+
+		if (pgd_none(*pgd))
+			break;
+
+		if (pgd_bad(*pgd)) {
+			printk("(bad)");
+			break;
+		}
+
+		pmd = pmd_offset((pud_t *) pgd, addr);
+		if (PTRS_PER_PMD != 1)
+			printk(", *pmd=%08lx", pmd_val(*pmd));
+
+		if (pmd_none(*pmd))
+			break;
+
+		if (pmd_bad(*pmd)) {
+			printk("(bad)");
+			break;
+		}
+
+		/* We must not map this if we have highmem enabled */
+		if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
+			break;
+
+		pte = pte_offset_map(pmd, addr);
+		printk(", *pte=%08lx", pte_val(*pte));
+		pte_unmap(pte);
+	} while (0);
+
+	printk("\n");
+}
+
+/*
+ * Oops.  The kernel tried to access some page that wasn't present.
+ */
+static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr,
+		unsigned int fsr, struct pt_regs *regs)
+{
+	/*
+	 * Are we prepared to handle this kernel fault?
+	 */
+	if (fixup_exception(regs))
+		return;
+
+	/*
+	 * No handler, we'll have to terminate things with extreme prejudice.
+	 */
+	bust_spinlocks(1);
+	printk(KERN_ALERT
+	       "Unable to handle kernel %s at virtual address %08lx\n",
+	       (addr < PAGE_SIZE) ? "NULL pointer dereference" :
+	       "paging request", addr);
+
+	show_pte(mm, addr);
+	die("Oops", regs, fsr);
+	bust_spinlocks(0);
+	do_exit(SIGKILL);
+}
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * User mode accesses just cause a SIGSEGV
+ */
+static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
+		unsigned int fsr, unsigned int sig, int code,
+		struct pt_regs *regs)
+{
+	struct siginfo si;
+
+	tsk->thread.address = addr;
+	tsk->thread.error_code = fsr;
+	tsk->thread.trap_no = 14;
+	si.si_signo = sig;
+	si.si_errno = 0;
+	si.si_code = code;
+	si.si_addr = (void __user *)addr;
+	force_sig_info(sig, &si, tsk);
+}
+
+void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->active_mm;
+
+	/*
+	 * If we are in kernel mode at this point, we
+	 * have no context to handle this fault with.
+	 */
+	if (user_mode(regs))
+		__do_user_fault(tsk, addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
+	else
+		__do_kernel_fault(mm, addr, fsr, regs);
+}
+
+#define VM_FAULT_BADMAP		0x010000
+#define VM_FAULT_BADACCESS	0x020000
+
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+	if (!(fsr ^ 0x12))	/* write? */
+		mask = VM_WRITE;
+	if (fsr & FSR_LNX_PF)
+		mask = VM_EXEC;
+
+	return vma->vm_flags & mask ? false : true;
+}
+
+static int __do_pf(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
+		struct task_struct *tsk)
+{
+	struct vm_area_struct *vma;
+	int fault;
+
+	vma = find_vma(mm, addr);
+	fault = VM_FAULT_BADMAP;
+	if (unlikely(!vma))
+		goto out;
+	if (unlikely(vma->vm_start > addr))
+		goto check_stack;
+
+	/*
+	 * Ok, we have a good vm_area for this
+	 * memory access, so we can handle it.
+	 */
+good_area:
+	if (access_error(fsr, vma)) {
+		fault = VM_FAULT_BADACCESS;
+		goto out;
+	}
+
+	/*
+	 * If for any reason at all we couldn't handle the fault, make
+	 * sure we exit gracefully rather than endlessly redo the fault.
+	 */
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK,
+			    (!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
+	if (unlikely(fault & VM_FAULT_ERROR))
+		return fault;
+	if (fault & VM_FAULT_MAJOR)
+		tsk->maj_flt++;
+	else
+		tsk->min_flt++;
+	return fault;
+
+check_stack:
+	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+		goto good_area;
+out:
+	return fault;
+}
+
+static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	int fault, sig, code;
+
+	tsk = current;
+	mm = tsk->mm;
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+	if (in_atomic() || !mm)
+		goto no_context;
+
+	/*
+	 * As per x86, we may deadlock here.  However, since the kernel only
+	 * validly references user space from well defined areas of the code,
+	 * we can bug out early if this is from code which shouldn't.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if (!user_mode(regs)
+		    && !search_exception_tables(regs->UCreg_pc))
+			goto no_context;
+		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in
+		 * which case, we'll have missed the might_sleep() from
+		 * down_read()
+		 */
+		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) &&
+		    !search_exception_tables(regs->UCreg_pc))
+			goto no_context;
+#endif
+	}
+
+	fault = __do_pf(mm, addr, fsr, tsk);
+	up_read(&mm->mmap_sem);
+
+	/*
+	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+	 */
+	if (likely(!(fault &
+	       (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
+		return 0;
+
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we
+		 * got oom-killed)
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
+	/*
+	 * If we are in kernel mode at this point, we
+	 * have no context to handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
+	if (fault & VM_FAULT_SIGBUS) {
+		/*
+		 * We had some memory, but were unable to
+		 * successfully fix up this page fault.
+		 */
+		sig = SIGBUS;
+		code = BUS_ADRERR;
+	} else {
+		/*
+		 * Something tried to access memory that
+		 * isn't in our memory map..
+		 */
+		sig = SIGSEGV;
+		code = fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR;
+	}
+
+	__do_user_fault(tsk, addr, fsr, sig, code, regs);
+	return 0;
+
+no_context:
+	__do_kernel_fault(mm, addr, fsr, regs);
+	return 0;
+}
+
+/*
+ * First Level Translation Fault Handler
+ *
+ * We enter here because the first level page table doesn't contain
+ * a valid entry for the address.
+ *
+ * If the address is in kernel space (>= TASK_SIZE), then we are
+ * probably faulting in the vmalloc() area.
+ *
+ * If the init_task's first level page tables contains the relevant
+ * entry, we copy the it to this task.  If not, we send the process
+ * a signal, fixup the exception, or oops the kernel.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may be in an
+ * interrupt or a critical region, and should only copy the information
+ * from the master page table, nothing more.
+ */
+static int do_ifault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	unsigned int index;
+	pgd_t *pgd, *pgd_k;
+	pmd_t *pmd, *pmd_k;
+
+	if (addr < TASK_SIZE)
+		return do_pf(addr, fsr, regs);
+
+	if (user_mode(regs))
+		goto bad_area;
+
+	index = pgd_index(addr);
+
+	pgd = cpu_get_pgd() + index;
+	pgd_k = init_mm.pgd + index;
+
+	if (pgd_none(*pgd_k))
+		goto bad_area;
+
+	pmd_k = pmd_offset((pud_t *) pgd_k, addr);
+	pmd = pmd_offset((pud_t *) pgd, addr);
+
+	if (pmd_none(*pmd_k))
+		goto bad_area;
+
+	set_pmd(pmd, *pmd_k);
+	flush_pmd_entry(pmd);
+	return 0;
+
+bad_area:
+	do_bad_area(addr, fsr, regs);
+	return 0;
+}
+
+/*
+ * This abort handler always returns "fault".
+ */
+static int do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	return 1;
+}
+
+static int do_good(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	unsigned int res1, res2;
+
+	printk("dabt exception but no error!\n");
+
+	__asm__ __volatile__(
+			"mff %0,f0\n"
+			"mff %1,f1\n"
+			: "=r"(res1), "=r"(res2)
+			:
+			: "memory");
+
+	printk(KERN_EMERG "r0 :%08x  r1 :%08x\n", res1, res2);
+	panic("shut up\n");
+	return 0;
+}
+
+static struct fsr_info {
+	int (*fn) (unsigned long addr, unsigned int fsr, struct pt_regs *regs);
+	int sig;
+	int code;
+	const char *name;
+} fsr_info[] = {
+	/*
+	 * The following are the standard Unicore-I and UniCore-II aborts.
+	 */
+	{ do_good,	SIGBUS,  0,		"no error"		},
+	{ do_bad,	SIGBUS,  BUS_ADRALN,	"alignment exception"	},
+	{ do_bad,	SIGBUS,  BUS_OBJERR,	"external exception"	},
+	{ do_bad,	SIGBUS,  0,		"burst operation"	},
+	{ do_bad,	SIGBUS,  0,		"unknown 00100"		},
+	{ do_ifault,	SIGSEGV, SEGV_MAPERR,	"2nd level pt non-exist"},
+	{ do_bad,	SIGBUS,  0,		"2nd lvl large pt non-exist" },
+	{ do_bad,	SIGBUS,  0,		"invalid pte"		},
+	{ do_pf,	SIGSEGV, SEGV_MAPERR,	"page miss"		},
+	{ do_bad,	SIGBUS,  0,		"middle page miss"	},
+	{ do_bad,	SIGBUS,	 0,		"large page miss"	},
+	{ do_pf,	SIGSEGV, SEGV_MAPERR,	"super page (section) miss" },
+	{ do_bad,	SIGBUS,  0,		"unknown 01100"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 01101"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 01110"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 01111"		},
+	{ do_bad,	SIGBUS,  0,		"addr: up 3G or IO"	},
+	{ do_pf,	SIGSEGV, SEGV_ACCERR,	"read unreadable addr"	},
+	{ do_pf,	SIGSEGV, SEGV_ACCERR,	"write unwriteable addr"},
+	{ do_pf,	SIGSEGV, SEGV_ACCERR,	"exec unexecutable addr"},
+	{ do_bad,	SIGBUS,  0,		"unknown 10100"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 10101"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 10110"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 10111"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11000"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11001"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11010"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11011"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11100"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11101"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11110"		},
+	{ do_bad,	SIGBUS,  0,		"unknown 11111"		}
+};
+
+void __init hook_fault_code(int nr,
+		int (*fn) (unsigned long, unsigned int, struct pt_regs *),
+		int sig, int code, const char *name)
+{
+	if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
+		BUG();
+
+	fsr_info[nr].fn   = fn;
+	fsr_info[nr].sig  = sig;
+	fsr_info[nr].code = code;
+	fsr_info[nr].name = name;
+}
+
+/*
+ * Dispatch a data abort to the relevant handler.
+ */
+asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr,
+			struct pt_regs *regs)
+{
+	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
+	       inf->name, fsr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code = inf->code;
+	info.si_addr = (void __user *)addr;
+	uc32_notify_die("", regs, &info, fsr, 0);
+}
+
+asmlinkage void do_PrefetchAbort(unsigned long addr,
+			unsigned int ifsr, struct pt_regs *regs)
+{
+	const struct fsr_info *inf = fsr_info + fsr_fs(ifsr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+	       inf->name, ifsr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code = inf->code;
+	info.si_addr = (void __user *)addr;
+	uc32_notify_die("", regs, &info, ifsr, 0);
+}
diff --git a/arch/unicore32/mm/flush.c b/arch/unicore32/mm/flush.c
new file mode 100644
index 00000000..6d4c096f
--- /dev/null
+++ b/arch/unicore32/mm/flush.c
@@ -0,0 +1,97 @@
+/*
+ * linux/arch/unicore32/mm/flush.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		unsigned long end)
+{
+	if (vma->vm_flags & VM_EXEC)
+		__flush_icache_all();
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr,
+		unsigned long pfn)
+{
+}
+
+static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr, unsigned long len)
+{
+	/* VIPT non-aliasing D-cache */
+	if (vma->vm_flags & VM_EXEC) {
+		unsigned long addr = (unsigned long)kaddr;
+
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ *
+ * Note that this code needs to run on the current CPU.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long uaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	memcpy(dst, src, len);
+	flush_ptrace_access(vma, page, uaddr, dst, len);
+}
+
+void __flush_dcache_page(struct address_space *mapping, struct page *page)
+{
+	/*
+	 * Writeback any data associated with the kernel mapping of this
+	 * page.  This ensures that data in the physical page is mutually
+	 * coherent with the kernels mapping.
+	 */
+	__cpuc_flush_kern_dcache_area(page_address(page), PAGE_SIZE);
+}
+
+/*
+ * Ensure cache coherency between kernel mapping and userspace mapping
+ * of this page.
+ */
+void flush_dcache_page(struct page *page)
+{
+	struct address_space *mapping;
+
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
+	if (page == ZERO_PAGE(0))
+		return;
+
+	mapping = page_mapping(page);
+
+	if (mapping && !mapping_mapped(mapping))
+		clear_bit(PG_dcache_clean, &page->flags);
+	else {
+		__flush_dcache_page(mapping, page);
+		if (mapping)
+			__flush_icache_all();
+		set_bit(PG_dcache_clean, &page->flags);
+	}
+}
+EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
new file mode 100644
index 00000000..de186bde
--- /dev/null
+++ b/arch/unicore32/mm/init.c
@@ -0,0 +1,518 @@
+/*
+ *  linux/arch/unicore32/mm/init.c
+ *
+ *  Copyright (C) 2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
+#include <linux/sort.h>
+#include <linux/dma-mapping.h>
+#include <linux/export.h>
+
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+#include <asm/memblock.h>
+#include <mach/map.h>
+
+#include "mm.h"
+
+static unsigned long phys_initrd_start __initdata = 0x01000000;
+static unsigned long phys_initrd_size __initdata = SZ_8M;
+
+static int __init early_initrd(char *p)
+{
+	unsigned long start, size;
+	char *endp;
+
+	start = memparse(p, &endp);
+	if (*endp == ',') {
+		size = memparse(endp + 1, NULL);
+
+		phys_initrd_start = start;
+		phys_initrd_size = size;
+	}
+	return 0;
+}
+early_param("initrd", early_initrd);
+
+/*
+ * This keeps memory configuration data used by a couple memory
+ * initialization functions, as well as show_mem() for the skipping
+ * of holes in the memory map.  It is populated by uc32_add_memory().
+ */
+struct meminfo meminfo;
+
+void show_mem(unsigned int filter)
+{
+	int free = 0, total = 0, reserved = 0;
+	int shared = 0, cached = 0, slab = 0, i;
+	struct meminfo *mi = &meminfo;
+
+	printk(KERN_DEFAULT "Mem-info:\n");
+	show_free_areas(filter);
+
+	for_each_bank(i, mi) {
+		struct membank *bank = &mi->bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (PageSlab(page))
+				slab++;
+			else if (!page_count(page))
+				free++;
+			else
+				shared += page_count(page) - 1;
+			page++;
+		} while (page < end);
+	}
+
+	printk(KERN_DEFAULT "%d pages of RAM\n", total);
+	printk(KERN_DEFAULT "%d free pages\n", free);
+	printk(KERN_DEFAULT "%d reserved pages\n", reserved);
+	printk(KERN_DEFAULT "%d slab pages\n", slab);
+	printk(KERN_DEFAULT "%d pages shared\n", shared);
+	printk(KERN_DEFAULT "%d pages swap cached\n", cached);
+}
+
+static void __init find_limits(unsigned long *min, unsigned long *max_low,
+	unsigned long *max_high)
+{
+	struct meminfo *mi = &meminfo;
+	int i;
+
+	*min = -1UL;
+	*max_low = *max_high = 0;
+
+	for_each_bank(i, mi) {
+		struct membank *bank = &mi->bank[i];
+		unsigned long start, end;
+
+		start = bank_pfn_start(bank);
+		end = bank_pfn_end(bank);
+
+		if (*min > start)
+			*min = start;
+		if (*max_high < end)
+			*max_high = end;
+		if (bank->highmem)
+			continue;
+		if (*max_low < end)
+			*max_low = end;
+	}
+}
+
+static void __init uc32_bootmem_init(unsigned long start_pfn,
+	unsigned long end_pfn)
+{
+	struct memblock_region *reg;
+	unsigned int boot_pages;
+	phys_addr_t bitmap;
+	pg_data_t *pgdat;
+
+	/*
+	 * Allocate the bootmem bitmap page.  This must be in a region
+	 * of memory which has already been mapped.
+	 */
+	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+	bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
+				__pfn_to_phys(end_pfn));
+
+	/*
+	 * Initialise the bootmem allocator, handing the
+	 * memory banks over to bootmem.
+	 */
+	node_set_online(0);
+	pgdat = NODE_DATA(0);
+	init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
+
+	/* Free the lowmem regions from memblock into bootmem. */
+	for_each_memblock(memory, reg) {
+		unsigned long start = memblock_region_memory_base_pfn(reg);
+		unsigned long end = memblock_region_memory_end_pfn(reg);
+
+		if (end >= end_pfn)
+			end = end_pfn;
+		if (start >= end)
+			break;
+
+		free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
+	}
+
+	/* Reserve the lowmem memblock reserved regions in bootmem. */
+	for_each_memblock(reserved, reg) {
+		unsigned long start = memblock_region_reserved_base_pfn(reg);
+		unsigned long end = memblock_region_reserved_end_pfn(reg);
+
+		if (end >= end_pfn)
+			end = end_pfn;
+		if (start >= end)
+			break;
+
+		reserve_bootmem(__pfn_to_phys(start),
+			(end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
+	}
+}
+
+static void __init uc32_bootmem_free(unsigned long min, unsigned long max_low,
+	unsigned long max_high)
+{
+	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+	struct memblock_region *reg;
+
+	/*
+	 * initialise the zones.
+	 */
+	memset(zone_size, 0, sizeof(zone_size));
+
+	/*
+	 * The memory size has already been determined.  If we need
+	 * to do anything fancy with the allocation of this memory
+	 * to the zones, now is the time to do it.
+	 */
+	zone_size[0] = max_low - min;
+
+	/*
+	 * Calculate the size of the holes.
+	 *  holes = node_size - sum(bank_sizes)
+	 */
+	memcpy(zhole_size, zone_size, sizeof(zhole_size));
+	for_each_memblock(memory, reg) {
+		unsigned long start = memblock_region_memory_base_pfn(reg);
+		unsigned long end = memblock_region_memory_end_pfn(reg);
+
+		if (start < max_low) {
+			unsigned long low_end = min(end, max_low);
+			zhole_size[0] -= low_end - start;
+		}
+	}
+
+	/*
+	 * Adjust the sizes according to any special requirements for
+	 * this machine type.
+	 */
+	arch_adjust_zones(zone_size, zhole_size);
+
+	free_area_init_node(0, zone_size, min, zhole_size);
+}
+
+int pfn_valid(unsigned long pfn)
+{
+	return memblock_is_memory(pfn << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(pfn_valid);
+
+static void uc32_memory_present(void)
+{
+}
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
+void __init uc32_memblock_init(struct meminfo *mi)
+{
+	int i;
+
+	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]),
+		meminfo_cmp, NULL);
+
+	for (i = 0; i < mi->nr_banks; i++)
+		memblock_add(mi->bank[i].start, mi->bank[i].size);
+
+	/* Register the kernel text, kernel data and initrd with memblock. */
+	memblock_reserve(__pa(_text), _end - _text);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size) {
+		memblock_reserve(phys_initrd_start, phys_initrd_size);
+
+		/* Now convert initrd to virtual addresses */
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+#endif
+
+	uc32_mm_memblock_reserve();
+
+	memblock_allow_resize();
+	memblock_dump_all();
+}
+
+void __init bootmem_init(void)
+{
+	unsigned long min, max_low, max_high;
+
+	max_low = max_high = 0;
+
+	find_limits(&min, &max_low, &max_high);
+
+	uc32_bootmem_init(min, max_low);
+
+#ifdef CONFIG_SWIOTLB
+	swiotlb_init(1);
+#endif
+	/*
+	 * Sparsemem tries to allocate bootmem in memory_present(),
+	 * so must be done after the fixed reservations
+	 */
+	uc32_memory_present();
+
+	/*
+	 * sparse_init() needs the bootmem allocator up and running.
+	 */
+	sparse_init();
+
+	/*
+	 * Now free the memory - free_area_init_node needs
+	 * the sparse mem_map arrays initialized by sparse_init()
+	 * for memmap_init_zone(), otherwise all PFNs are invalid.
+	 */
+	uc32_bootmem_free(min, max_low, max_high);
+
+	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
+
+	/*
+	 * This doesn't seem to be used by the Linux memory manager any
+	 * more, but is used by ll_rw_block.  If we can get rid of it, we
+	 * also get rid of some of the stuff above as well.
+	 *
+	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+	 * the system, not the maximum PFN.
+	 */
+	max_low_pfn = max_low - PHYS_PFN_OFFSET;
+	max_pfn = max_high - PHYS_PFN_OFFSET;
+}
+
+static inline int free_area(unsigned long pfn, unsigned long end, char *s)
+{
+	unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10);
+
+	for (; pfn < end; pfn++) {
+		struct page *page = pfn_to_page(pfn);
+		ClearPageReserved(page);
+		init_page_count(page);
+		__free_page(page);
+		pages++;
+	}
+
+	if (size && s)
+		printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
+
+	return pages;
+}
+
+static inline void
+free_memmap(unsigned long start_pfn, unsigned long end_pfn)
+{
+	struct page *start_pg, *end_pg;
+	unsigned long pg, pgend;
+
+	/*
+	 * Convert start_pfn/end_pfn to a struct page pointer.
+	 */
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
+	end_pg = pfn_to_page(end_pfn);
+
+	/*
+	 * Convert to physical addresses, and
+	 * round start upwards and end downwards.
+	 */
+	pg = PAGE_ALIGN(__pa(start_pg));
+	pgend = __pa(end_pg) & PAGE_MASK;
+
+	/*
+	 * If there are free pages between these,
+	 * free the section of the memmap array.
+	 */
+	if (pg < pgend)
+		free_bootmem(pg, pgend - pg);
+}
+
+/*
+ * The mem_map array can get very big.  Free the unused area of the memory map.
+ */
+static void __init free_unused_memmap(struct meminfo *mi)
+{
+	unsigned long bank_start, prev_bank_end = 0;
+	unsigned int i;
+
+	/*
+	 * This relies on each bank being in address order.
+	 * The banks are sorted previously in bootmem_init().
+	 */
+	for_each_bank(i, mi) {
+		struct membank *bank = &mi->bank[i];
+
+		bank_start = bank_pfn_start(bank);
+
+		/*
+		 * If we had a previous bank, and there is a space
+		 * between the current bank and the previous, free it.
+		 */
+		if (prev_bank_end && prev_bank_end < bank_start)
+			free_memmap(prev_bank_end, bank_start);
+
+		/*
+		 * Align up here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank end aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
+	}
+}
+
+/*
+ * mem_init() marks the free areas in the mem_map and tells us how much
+ * memory is free.  This is done after various parts of the system have
+ * claimed their memory after the kernel image.
+ */
+void __init mem_init(void)
+{
+	unsigned long reserved_pages, free_pages;
+	struct memblock_region *reg;
+	int i;
+
+	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
+
+	/* this will put all unused low memory onto the freelists */
+	free_unused_memmap(&meminfo);
+
+	totalram_pages += free_all_bootmem();
+
+	reserved_pages = free_pages = 0;
+
+	for_each_bank(i, &meminfo) {
+		struct membank *bank = &meminfo.bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			if (PageReserved(page))
+				reserved_pages++;
+			else if (!page_count(page))
+				free_pages++;
+			page++;
+		} while (page < end);
+	}
+
+	/*
+	 * Since our memory may not be contiguous, calculate the
+	 * real number of pages we have in this system
+	 */
+	printk(KERN_INFO "Memory:");
+	num_physpages = 0;
+	for_each_memblock(memory, reg) {
+		unsigned long pages = memblock_region_memory_end_pfn(reg) -
+			memblock_region_memory_base_pfn(reg);
+		num_physpages += pages;
+		printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
+	}
+	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
+
+	printk(KERN_NOTICE "Memory: %luk/%luk available, %luk reserved, %luK highmem\n",
+		nr_free_pages() << (PAGE_SHIFT-10),
+		free_pages << (PAGE_SHIFT-10),
+		reserved_pages << (PAGE_SHIFT-10),
+		totalhigh_pages << (PAGE_SHIFT-10));
+
+	printk(KERN_NOTICE "Virtual kernel memory layout:\n"
+		"    vector  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+		"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+		"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+		"    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
+		"      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
+		"      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
+		"      .data : 0x%p" " - 0x%p" "   (%4d kB)\n",
+
+		VECTORS_BASE, VECTORS_BASE + PAGE_SIZE,
+		DIV_ROUND_UP(PAGE_SIZE, SZ_1K),
+		VMALLOC_START, VMALLOC_END,
+		DIV_ROUND_UP((VMALLOC_END - VMALLOC_START), SZ_1M),
+		PAGE_OFFSET, (unsigned long)high_memory,
+		DIV_ROUND_UP(((unsigned long)high_memory - PAGE_OFFSET), SZ_1M),
+		MODULES_VADDR, MODULES_END,
+		DIV_ROUND_UP((MODULES_END - MODULES_VADDR), SZ_1M),
+
+		__init_begin, __init_end,
+		DIV_ROUND_UP((__init_end - __init_begin), SZ_1K),
+		_stext, _etext,
+		DIV_ROUND_UP((_etext - _stext), SZ_1K),
+		_sdata, _edata,
+		DIV_ROUND_UP((_edata - _sdata), SZ_1K));
+
+	BUILD_BUG_ON(TASK_SIZE				> MODULES_VADDR);
+	BUG_ON(TASK_SIZE				> MODULES_VADDR);
+
+	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
+		/*
+		 * On a machine this small we won't get
+		 * anywhere without overcommit, so turn
+		 * it on by default.
+		 */
+		sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
+	}
+}
+
+void free_initmem(void)
+{
+	totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
+				    __phys_to_pfn(__pa(__init_end)),
+				    "init");
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+
+static int keep_initrd;
+
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	if (!keep_initrd)
+		totalram_pages += free_area(__phys_to_pfn(__pa(start)),
+					    __phys_to_pfn(__pa(end)),
+					    "initrd");
+}
+
+static int __init keepinitrd_setup(char *__unused)
+{
+	keep_initrd = 1;
+	return 1;
+}
+
+__setup("keepinitrd", keepinitrd_setup);
+#endif
diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c
new file mode 100644
index 00000000..b7a60559
--- /dev/null
+++ b/arch/unicore32/mm/ioremap.c
@@ -0,0 +1,261 @@
+/*
+ * linux/arch/unicore32/mm/ioremap.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Re-map IO memory to kernel address space so that we can access it.
+ *
+ * This allows a driver to remap an arbitrary region of bus memory into
+ * virtual space.  One should *only* use readl, writel, memcpy_toio and
+ * so on with such remapped areas.
+ *
+ * Because UniCore only has a 32-bit address space we can't address the
+ * whole of the (physical) PCI space at once.  PCI huge-mode addressing
+ * allows us to circumvent this restriction by splitting PCI space into
+ * two 2GB chunks and mapping only one at a time into processor memory.
+ * We use MMU protection domains to trap any attempt to access the bank
+ * that is not currently mapped.  (This isn't fully implemented yet.)
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+#include <mach/map.h>
+#include "mm.h"
+
+/*
+ * Used by ioremap() and iounmap() code to mark (super)section-mapped
+ * I/O regions in vm_struct->flags field.
+ */
+#define VM_UNICORE_SECTION_MAPPING	0x80000000
+
+int ioremap_page(unsigned long virt, unsigned long phys,
+		 const struct mem_type *mtype)
+{
+	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
+				  __pgprot(mtype->prot_pte));
+}
+EXPORT_SYMBOL(ioremap_page);
+
+/*
+ * Section support is unsafe on SMP - If you iounmap and ioremap a region,
+ * the other CPUs will not see this change until their next context switch.
+ * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
+ * which requires the new ioremap'd region to be referenced, the CPU will
+ * reference the _old_ region.
+ *
+ * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
+ * mask the size back to 4MB aligned or we will overflow in the loop below.
+ */
+static void unmap_area_sections(unsigned long virt, unsigned long size)
+{
+	unsigned long addr = virt, end = virt + (size & ~(SZ_4M - 1));
+	pgd_t *pgd;
+
+	flush_cache_vunmap(addr, end);
+	pgd = pgd_offset_k(addr);
+	do {
+		pmd_t pmd, *pmdp = pmd_offset((pud_t *)pgd, addr);
+
+		pmd = *pmdp;
+		if (!pmd_none(pmd)) {
+			/*
+			 * Clear the PMD from the page table, and
+			 * increment the kvm sequence so others
+			 * notice this change.
+			 *
+			 * Note: this is still racy on SMP machines.
+			 */
+			pmd_clear(pmdp);
+
+			/*
+			 * Free the page table, if there was one.
+			 */
+			if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
+				pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
+		}
+
+		addr += PGDIR_SIZE;
+		pgd++;
+	} while (addr < end);
+
+	flush_tlb_kernel_range(virt, end);
+}
+
+static int
+remap_area_sections(unsigned long virt, unsigned long pfn,
+		    size_t size, const struct mem_type *type)
+{
+	unsigned long addr = virt, end = virt + size;
+	pgd_t *pgd;
+
+	/*
+	 * Remove and free any PTE-based mapping, and
+	 * sync the current kernel mapping.
+	 */
+	unmap_area_sections(virt, size);
+
+	pgd = pgd_offset_k(addr);
+	do {
+		pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
+
+		set_pmd(pmd, __pmd(__pfn_to_phys(pfn) | type->prot_sect));
+		pfn += SZ_4M >> PAGE_SHIFT;
+		flush_pmd_entry(pmd);
+
+		addr += PGDIR_SIZE;
+		pgd++;
+	} while (addr < end);
+
+	return 0;
+}
+
+void __iomem *__uc32_ioremap_pfn_caller(unsigned long pfn,
+	unsigned long offset, size_t size, unsigned int mtype, void *caller)
+{
+	const struct mem_type *type;
+	int err;
+	unsigned long addr;
+	struct vm_struct *area;
+
+	/*
+	 * High mappings must be section aligned
+	 */
+	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SECTION_MASK))
+		return NULL;
+
+	/*
+	 * Don't allow RAM to be mapped
+	 */
+	if (pfn_valid(pfn)) {
+		printk(KERN_WARNING "BUG: Your driver calls ioremap() on\n"
+			"system memory.  This leads to architecturally\n"
+			"unpredictable behaviour, and ioremap() will fail in\n"
+			"the next kernel release. Please fix your driver.\n");
+		WARN_ON(1);
+	}
+
+	type = get_mem_type(mtype);
+	if (!type)
+		return NULL;
+
+	/*
+	 * Page align the mapping size, taking account of any offset.
+	 */
+	size = PAGE_ALIGN(offset + size);
+
+	area = get_vm_area_caller(size, VM_IOREMAP, caller);
+	if (!area)
+		return NULL;
+	addr = (unsigned long)area->addr;
+
+	if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+		area->flags |= VM_UNICORE_SECTION_MAPPING;
+		err = remap_area_sections(addr, pfn, size, type);
+	} else
+		err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
+					 __pgprot(type->prot_pte));
+
+	if (err) {
+		vunmap((void *)addr);
+		return NULL;
+	}
+
+	flush_cache_vmap(addr, addr + size);
+	return (void __iomem *) (offset + addr);
+}
+
+void __iomem *__uc32_ioremap_caller(unsigned long phys_addr, size_t size,
+	unsigned int mtype, void *caller)
+{
+	unsigned long last_addr;
+	unsigned long offset = phys_addr & ~PAGE_MASK;
+	unsigned long pfn = __phys_to_pfn(phys_addr);
+
+	/*
+	 * Don't allow wraparound or zero size
+	 */
+	last_addr = phys_addr + size - 1;
+	if (!size || last_addr < phys_addr)
+		return NULL;
+
+	return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype, caller);
+}
+
+/*
+ * Remap an arbitrary physical address space into the kernel virtual
+ * address space. Needed when the kernel wants to access high addresses
+ * directly.
+ *
+ * NOTE! We need to allow non-page-aligned mappings too: we will obviously
+ * have to convert them into an offset in a page-aligned mapping, but the
+ * caller shouldn't need to know that small detail.
+ */
+void __iomem *
+__uc32_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
+		  unsigned int mtype)
+{
+	return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype,
+			__builtin_return_address(0));
+}
+EXPORT_SYMBOL(__uc32_ioremap_pfn);
+
+void __iomem *
+__uc32_ioremap(unsigned long phys_addr, size_t size)
+{
+	return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE,
+			__builtin_return_address(0));
+}
+EXPORT_SYMBOL(__uc32_ioremap);
+
+void __iomem *
+__uc32_ioremap_cached(unsigned long phys_addr, size_t size)
+{
+	return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE_CACHED,
+			__builtin_return_address(0));
+}
+EXPORT_SYMBOL(__uc32_ioremap_cached);
+
+void __uc32_iounmap(volatile void __iomem *io_addr)
+{
+	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
+	struct vm_struct **p, *tmp;
+
+	/*
+	 * If this is a section based mapping we need to handle it
+	 * specially as the VM subsystem does not know how to handle
+	 * such a beast. We need the lock here b/c we need to clear
+	 * all the mappings before the area can be reclaimed
+	 * by someone else.
+	 */
+	write_lock(&vmlist_lock);
+	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
+		if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+			if (tmp->flags & VM_UNICORE_SECTION_MAPPING) {
+				unmap_area_sections((unsigned long)tmp->addr,
+						    tmp->size);
+			}
+			break;
+		}
+	}
+	write_unlock(&vmlist_lock);
+
+	vunmap(addr);
+}
+EXPORT_SYMBOL(__uc32_iounmap);
diff --git a/arch/unicore32/mm/mm.h b/arch/unicore32/mm/mm.h
new file mode 100644
index 00000000..05c7f532
--- /dev/null
+++ b/arch/unicore32/mm/mm.h
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/unicore32/mm/mm.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hwdef-copro.h>
+
+/* the upper-most page table pointer */
+extern pmd_t *top_pmd;
+extern int sysctl_overcommit_memory;
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+	return pmd_offset((pud_t *)pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+	return pmd_off(pgd_offset_k(virt), virt);
+}
+
+struct mem_type {
+	unsigned int prot_pte;
+	unsigned int prot_l1;
+	unsigned int prot_sect;
+};
+
+const struct mem_type *get_mem_type(unsigned int type);
+
+extern void __flush_dcache_page(struct address_space *, struct page *);
+extern void hook_fault_code(int nr, int (*fn)
+		(unsigned long, unsigned int, struct pt_regs *),
+		int sig, int code, const char *name);
+
+void __init bootmem_init(void);
+void uc32_mm_memblock_reserve(void);
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
new file mode 100644
index 00000000..43c20b40
--- /dev/null
+++ b/arch/unicore32/mm/mmu.c
@@ -0,0 +1,512 @@
+/*
+ * linux/arch/unicore32/mm/mmu.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/memblock.h>
+#include <linux/fs.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/tlb.h>
+#include <asm/memblock.h>
+
+#include <mach/map.h>
+
+#include "mm.h"
+
+/*
+ * empty_zero_page is a special page that is used for
+ * zero-initialized data and COW.
+ */
+struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
+/*
+ * The pmd table for the upper-most set of pages.
+ */
+pmd_t *top_pmd;
+
+pgprot_t pgprot_user;
+EXPORT_SYMBOL(pgprot_user);
+
+pgprot_t pgprot_kernel;
+EXPORT_SYMBOL(pgprot_kernel);
+
+static int __init noalign_setup(char *__unused)
+{
+	cr_alignment &= ~CR_A;
+	cr_no_alignment &= ~CR_A;
+	set_cr(cr_alignment);
+	return 1;
+}
+__setup("noalign", noalign_setup);
+
+void adjust_cr(unsigned long mask, unsigned long set)
+{
+	unsigned long flags;
+
+	mask &= ~CR_A;
+
+	set &= mask;
+
+	local_irq_save(flags);
+
+	cr_no_alignment = (cr_no_alignment & ~mask) | set;
+	cr_alignment = (cr_alignment & ~mask) | set;
+
+	set_cr((get_cr() & ~mask) | set);
+
+	local_irq_restore(flags);
+}
+
+struct map_desc {
+	unsigned long virtual;
+	unsigned long pfn;
+	unsigned long length;
+	unsigned int type;
+};
+
+#define PROT_PTE_DEVICE		(PTE_PRESENT | PTE_YOUNG |	\
+				PTE_DIRTY | PTE_READ | PTE_WRITE)
+#define PROT_SECT_DEVICE	(PMD_TYPE_SECT | PMD_PRESENT |	\
+				PMD_SECT_READ | PMD_SECT_WRITE)
+
+static struct mem_type mem_types[] = {
+	[MT_DEVICE] = {		  /* Strongly ordered */
+		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_l1	= PMD_TYPE_TABLE | PMD_PRESENT,
+		.prot_sect	= PROT_SECT_DEVICE,
+	},
+	/*
+	 * MT_KUSER: pte for vecpage -- cacheable,
+	 *       and sect for unigfx mmap -- noncacheable
+	 */
+	[MT_KUSER] = {
+		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
+				PTE_CACHEABLE | PTE_READ | PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
+		.prot_sect = PROT_SECT_DEVICE,
+	},
+	[MT_HIGH_VECTORS] = {
+		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
+				PTE_CACHEABLE | PTE_READ | PTE_WRITE |
+				PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
+	},
+	[MT_MEMORY] = {
+		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
+				PTE_WRITE | PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
+		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
+				PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC,
+	},
+	[MT_ROM] = {
+		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
+				PMD_SECT_READ,
+	},
+};
+
+const struct mem_type *get_mem_type(unsigned int type)
+{
+	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
+}
+EXPORT_SYMBOL(get_mem_type);
+
+/*
+ * Adjust the PMD section entries according to the CPU in use.
+ */
+static void __init build_mem_type_table(void)
+{
+	pgprot_user   = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE);
+	pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG |
+				 PTE_DIRTY | PTE_READ | PTE_WRITE |
+				 PTE_EXEC | PTE_CACHEABLE);
+}
+
+#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
+
+static void __init *early_alloc(unsigned long sz)
+{
+	void *ptr = __va(memblock_alloc(sz, sz));
+	memset(ptr, 0, sz);
+	return ptr;
+}
+
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
+		unsigned long prot)
+{
+	if (pmd_none(*pmd)) {
+		pte_t *pte = early_alloc(PTRS_PER_PTE * sizeof(pte_t));
+		__pmd_populate(pmd, __pa(pte) | prot);
+	}
+	BUG_ON(pmd_bad(*pmd));
+	return pte_offset_kernel(pmd, addr);
+}
+
+static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
+				  unsigned long end, unsigned long pfn,
+				  const struct mem_type *type)
+{
+	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
+	do {
+		set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte)));
+		pfn++;
+	} while (pte++, addr += PAGE_SIZE, addr != end);
+}
+
+static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
+				      unsigned long end, unsigned long phys,
+				      const struct mem_type *type)
+{
+	pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
+
+	/*
+	 * Try a section mapping - end, addr and phys must all be aligned
+	 * to a section boundary.
+	 */
+	if (((addr | end | phys) & ~SECTION_MASK) == 0) {
+		pmd_t *p = pmd;
+
+		do {
+			set_pmd(pmd, __pmd(phys | type->prot_sect));
+			phys += SECTION_SIZE;
+		} while (pmd++, addr += SECTION_SIZE, addr != end);
+
+		flush_pmd_entry(p);
+	} else {
+		/*
+		 * No need to loop; pte's aren't interested in the
+		 * individual L1 entries.
+		 */
+		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
+	}
+}
+
+/*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'.  We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections.
+ */
+static void __init create_mapping(struct map_desc *md)
+{
+	unsigned long phys, addr, length, end;
+	const struct mem_type *type;
+	pgd_t *pgd;
+
+	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+		printk(KERN_WARNING "BUG: not creating mapping for "
+		       "0x%08llx at 0x%08lx in user region\n",
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
+		return;
+	}
+
+	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
+		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
+		       "overlaps vmalloc space\n",
+		       __pfn_to_phys((u64)md->pfn), md->virtual);
+	}
+
+	type = &mem_types[md->type];
+
+	addr = md->virtual & PAGE_MASK;
+	phys = (unsigned long)__pfn_to_phys(md->pfn);
+	length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
+
+	if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
+		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
+		       "be mapped using pages, ignoring.\n",
+		       __pfn_to_phys(md->pfn), addr);
+		return;
+	}
+
+	pgd = pgd_offset_k(addr);
+	end = addr + length;
+	do {
+		unsigned long next = pgd_addr_end(addr, end);
+
+		alloc_init_section(pgd, addr, next, phys, type);
+
+		phys += next - addr;
+		addr = next;
+	} while (pgd++, addr != end);
+}
+
+static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static int __init early_vmalloc(char *arg)
+{
+	unsigned long vmalloc_reserve = memparse(arg, NULL);
+
+	if (vmalloc_reserve < SZ_16M) {
+		vmalloc_reserve = SZ_16M;
+		printk(KERN_WARNING
+			"vmalloc area too small, limiting to %luMB\n",
+			vmalloc_reserve >> 20);
+	}
+
+	if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
+		vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
+		printk(KERN_WARNING
+			"vmalloc area is too big, limiting to %luMB\n",
+			vmalloc_reserve >> 20);
+	}
+
+	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
+	return 0;
+}
+early_param("vmalloc", early_vmalloc);
+
+static phys_addr_t lowmem_limit __initdata = SZ_1G;
+
+static void __init sanity_check_meminfo(void)
+{
+	int i, j;
+
+	lowmem_limit = __pa(vmalloc_min - 1) + 1;
+	memblock_set_current_limit(lowmem_limit);
+
+	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
+		struct membank *bank = &meminfo.bank[j];
+		*bank = meminfo.bank[i];
+		j++;
+	}
+	meminfo.nr_banks = j;
+}
+
+static inline void prepare_page_table(void)
+{
+	unsigned long addr;
+	phys_addr_t end;
+
+	/*
+	 * Clear out all the mappings below the kernel image.
+	 */
+	for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	/*
+	 * Find the end of the first block of lowmem.
+	 */
+	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
+	if (end >= lowmem_limit)
+		end = lowmem_limit;
+
+	/*
+	 * Clear out all the kernel space mappings, except for the first
+	 * memory bank, up to the end of the vmalloc region.
+	 */
+	for (addr = __phys_to_virt(end);
+	     addr < VMALLOC_END; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+}
+
+/*
+ * Reserve the special regions of memory
+ */
+void __init uc32_mm_memblock_reserve(void)
+{
+	/*
+	 * Reserve the page tables.  These are already in use,
+	 * and can only be in node 0.
+	 */
+	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
+}
+
+/*
+ * Set up device the mappings.  Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function.  This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
+ */
+static void __init devicemaps_init(void)
+{
+	struct map_desc map;
+	unsigned long addr;
+	void *vectors;
+
+	/*
+	 * Allocate the vector page early.
+	 */
+	vectors = early_alloc(PAGE_SIZE);
+
+	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+		pmd_clear(pmd_off_k(addr));
+
+	/*
+	 * Create a mapping for the machine vectors at the high-vectors
+	 * location (0xffff0000).  If we aren't using high-vectors, also
+	 * create a mapping at the low-vectors virtual address.
+	 */
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.virtual = VECTORS_BASE;
+	map.length = PAGE_SIZE;
+	map.type = MT_HIGH_VECTORS;
+	create_mapping(&map);
+
+	/*
+	 * Create a mapping for the kuser page at the special
+	 * location (0xbfff0000) to the same vectors location.
+	 */
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.virtual = KUSER_VECPAGE_BASE;
+	map.length = PAGE_SIZE;
+	map.type = MT_KUSER;
+	create_mapping(&map);
+
+	/*
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state wrt the writebuffer.  This also ensures that
+	 * any write-allocated cache lines in the vector page are written
+	 * back.  After this point, we can start to touch devices again.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+}
+
+static void __init map_lowmem(void)
+{
+	struct memblock_region *reg;
+
+	/* Map all the lowmem memory banks. */
+	for_each_memblock(memory, reg) {
+		phys_addr_t start = reg->base;
+		phys_addr_t end = start + reg->size;
+		struct map_desc map;
+
+		if (end > lowmem_limit)
+			end = lowmem_limit;
+		if (start >= end)
+			break;
+
+		map.pfn = __phys_to_pfn(start);
+		map.virtual = __phys_to_virt(start);
+		map.length = end - start;
+		map.type = MT_MEMORY;
+
+		create_mapping(&map);
+	}
+}
+
+/*
+ * paging_init() sets up the page tables, initialises the zone memory
+ * maps, and sets up the zero page, bad page and bad page tables.
+ */
+void __init paging_init(void)
+{
+	void *zero_page;
+
+	build_mem_type_table();
+	sanity_check_meminfo();
+	prepare_page_table();
+	map_lowmem();
+	devicemaps_init();
+
+	top_pmd = pmd_off_k(0xffff0000);
+
+	/* allocate the zero page. */
+	zero_page = early_alloc(PAGE_SIZE);
+
+	bootmem_init();
+
+	empty_zero_page = virt_to_page(zero_page);
+	__flush_dcache_page(NULL, empty_zero_page);
+}
+
+/*
+ * In order to soft-boot, we need to insert a 1:1 mapping in place of
+ * the user-mode pages.  This will then ensure that we have predictable
+ * results when turning the mmu off
+ */
+void setup_mm_for_reboot(char mode)
+{
+	unsigned long base_pmdval;
+	pgd_t *pgd;
+	int i;
+
+	/*
+	 * We need to access to user-mode page tables here. For kernel threads
+	 * we don't have any user-mode mappings so we use the context that we
+	 * "borrowed".
+	 */
+	pgd = current->active_mm->pgd;
+
+	base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT;
+
+	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
+		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
+		pmd_t *pmd;
+
+		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
+		set_pmd(pmd, __pmd(pmdval));
+		flush_pmd_entry(pmd);
+	}
+
+	local_flush_tlb_all();
+}
+
+/*
+ * Take care of architecture specific things when placing a new PTE into
+ * a page table, or changing an existing PTE.  Basically, there are two
+ * things that we need to take care of:
+ *
+ *  1. If PG_dcache_clean is not set for the page, we need to ensure
+ *     that any cache entries for the kernels virtual memory
+ *     range are written back to the page.
+ *  2. If we have multiple shared mappings of the same space in
+ *     an object, we need to deal with the cache aliasing issues.
+ *
+ * Note that the pte lock will be held.
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
+	pte_t *ptep)
+{
+	unsigned long pfn = pte_pfn(*ptep);
+	struct address_space *mapping;
+	struct page *page;
+
+	if (!pfn_valid(pfn))
+		return;
+
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
+	page = pfn_to_page(pfn);
+	if (page == ZERO_PAGE(0))
+		return;
+
+	mapping = page_mapping(page);
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+		__flush_dcache_page(mapping, page);
+	if (mapping)
+		if (vma->vm_flags & VM_EXEC)
+			__flush_icache_all();
+}
diff --git a/arch/unicore32/mm/pgd.c b/arch/unicore32/mm/pgd.c
new file mode 100644
index 00000000..08b8d429
--- /dev/null
+++ b/arch/unicore32/mm/pgd.c
@@ -0,0 +1,102 @@
+/*
+ * linux/arch/unicore32/mm/pgd.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mm.h>
+#include <linux/gfp.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+
+#include "mm.h"
+
+#define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
+
+/*
+ * need to get a 4k page for level 1
+ */
+pgd_t *get_pgd_slow(struct mm_struct *mm)
+{
+	pgd_t *new_pgd, *init_pgd;
+	pmd_t *new_pmd, *init_pmd;
+	pte_t *new_pte, *init_pte;
+
+	new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 0);
+	if (!new_pgd)
+		goto no_pgd;
+
+	memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+
+	/*
+	 * Copy over the kernel and IO PGD entries
+	 */
+	init_pgd = pgd_offset_k(0);
+	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
+		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+
+	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
+
+	if (!vectors_high()) {
+		/*
+		 * On UniCore, first page must always be allocated since it
+		 * contains the machine vectors.
+		 */
+		new_pmd = pmd_alloc(mm, (pud_t *)new_pgd, 0);
+		if (!new_pmd)
+			goto no_pmd;
+
+		new_pte = pte_alloc_map(mm, NULL, new_pmd, 0);
+		if (!new_pte)
+			goto no_pte;
+
+		init_pmd = pmd_offset((pud_t *)init_pgd, 0);
+		init_pte = pte_offset_map(init_pmd, 0);
+		set_pte(new_pte, *init_pte);
+		pte_unmap(init_pte);
+		pte_unmap(new_pte);
+	}
+
+	return new_pgd;
+
+no_pte:
+	pmd_free(mm, new_pmd);
+no_pmd:
+	free_pages((unsigned long)new_pgd, 0);
+no_pgd:
+	return NULL;
+}
+
+void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
+{
+	pmd_t *pmd;
+	pgtable_t pte;
+
+	if (!pgd)
+		return;
+
+	/* pgd is always present and good */
+	pmd = pmd_off(pgd, 0);
+	if (pmd_none(*pmd))
+		goto free;
+	if (pmd_bad(*pmd)) {
+		pmd_ERROR(*pmd);
+		pmd_clear(pmd);
+		goto free;
+	}
+
+	pte = pmd_pgtable(*pmd);
+	pmd_clear(pmd);
+	pte_free(mm, pte);
+	pmd_free(mm, pmd);
+free:
+	free_pages((unsigned long) pgd, 0);
+}
diff --git a/arch/unicore32/mm/proc-macros.S b/arch/unicore32/mm/proc-macros.S
new file mode 100644
index 00000000..51560d68
--- /dev/null
+++ b/arch/unicore32/mm/proc-macros.S
@@ -0,0 +1,145 @@
+/*
+ * linux/arch/unicore32/mm/proc-macros.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * We need constants.h for:
+ *  VMA_VM_MM
+ *  VMA_VM_FLAGS
+ *  VM_EXEC
+ */
+#include <generated/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+
+/*
+ * the cache line sizes of the I and D cache are the same
+ */
+#define CACHE_LINESIZE	32
+
+/*
+ * This is the maximum size of an area which will be invalidated
+ * using the single invalidate entry instructions.  Anything larger
+ * than this, and we go for the whole cache.
+ *
+ * This value should be chosen such that we choose the cheapest
+ * alternative.
+ */
+#ifdef CONFIG_CPU_UCV2
+#define MAX_AREA_SIZE	0x800		/* 64 cache line */
+#endif
+
+/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+	.macro	vma_vm_mm, rd, rn
+	ldw	\rd, [\rn+], #VMA_VM_MM
+	.endm
+
+/*
+ * vma_vm_flags - get vma->vm_flags
+ */
+	.macro	vma_vm_flags, rd, rn
+	ldw	\rd, [\rn+], #VMA_VM_FLAGS
+	.endm
+
+	.macro	tsk_mm, rd, rn
+	ldw	\rd, [\rn+], #TI_TASK
+	ldw	\rd, [\rd+], #TSK_ACTIVE_MM
+	.endm
+
+/*
+ * act_mm - get current->active_mm
+ */
+	.macro	act_mm, rd
+	andn	\rd, sp, #8128
+	andn	\rd, \rd, #63
+	ldw	\rd, [\rd+], #TI_TASK
+	ldw	\rd, [\rd+], #TSK_ACTIVE_MM
+	.endm
+
+/*
+ * mmid - get context id from mm pointer (mm->context.id)
+ */
+	.macro	mmid, rd, rn
+	ldw	\rd, [\rn+], #MM_CONTEXT_ID
+	.endm
+
+/*
+ * mask_asid - mask the ASID from the context ID
+ */
+	.macro	asid, rd, rn
+	and	\rd, \rn, #255
+	.endm
+
+	.macro	crval, clear, mmuset, ucset
+	.word	\clear
+	.word	\mmuset
+	.endm
+
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+/*
+ * va2pa va, pa, tbl, msk, off, err
+ *	This macro is used to translate virtual address to its physical address.
+ *
+ *	va: virtual address
+ *	pa: physical address, result is stored in this register
+ *	tbl, msk, off:	temp registers, will be destroyed
+ *	err: jump to error label if the physical address not exist
+ * NOTE: all regs must be different
+ */
+	.macro	va2pa, va, pa, tbl, msk, off, err=990f
+	movc	\pa, p0.c2, #0
+	mov	\off, \va >> #22		@ off <- index of 1st page table
+	adr	\tbl, 910f			@ tbl <- table of 1st page table
+900:						@ ---- handle 1, 2 page table
+	add	\pa, \pa, #PAGE_OFFSET		@ pa <- virt addr of page table
+	ldw	\pa, [\pa+], \off << #2		@ pa <- the content of pt
+	cand.a	\pa, #4				@ test exist bit
+	beq	\err				@ if not exist
+	and	\off, \pa, #3			@ off <- the last 2 bits
+	add	\tbl, \tbl, \off << #3		@ cmove table pointer
+	ldw	\msk, [\tbl+], #0		@ get the mask
+	ldw	pc, [\tbl+], #4
+930:						@ ---- handle 2nd page table
+	and	\pa, \pa, \msk			@ pa <- phys addr of 2nd pt
+	mov	\off, \va << #10
+	cntlo	\tbl, \msk			@ use tbl as temp reg
+	mov	\off, \off >> \tbl
+	mov	\off, \off >> #2		@ off <- index of 2nd pt
+	adr	\tbl, 920f			@ tbl <- table of 2nd pt
+	b	900b
+910:						@ 1st level page table
+	.word	0xfffff000, 930b		@ second level page table
+	.word	0xfffffc00, 930b		@ second level large page table
+	.word	0x00000000, \err		@ invalid
+	.word	0xffc00000, 980f		@ super page
+
+920:						@ 2nd level page table
+	.word	0xfffff000, 980f		@ page
+	.word	0xffffc000, 980f		@ middle page
+	.word	0xffff0000, 980f		@ large page
+	.word	0x00000000, \err		@ invalid
+980:
+	andn	\tbl, \va, \msk
+	and	\pa, \pa, \msk
+	or	\pa, \pa, \tbl
+990:
+	.endm
+#endif
+
+	.macro dcacheline_flush, addr, t1, t2
+	mov	\t1, \addr << #20
+	ldw	\t2, =_stext			@ _stext must ALIGN(4096)
+	add	\t2, \t2, \t1 >> #20
+	ldw	\t1, [\t2+], #0x0000
+	ldw	\t1, [\t2+], #0x1000
+	ldw	\t1, [\t2+], #0x2000
+	ldw	\t1, [\t2+], #0x3000
+	.endm
diff --git a/arch/unicore32/mm/proc-syms.c b/arch/unicore32/mm/proc-syms.c
new file mode 100644
index 00000000..f30071e3
--- /dev/null
+++ b/arch/unicore32/mm/proc-syms.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/unicore32/mm/proc-syms.c
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+
+EXPORT_SYMBOL(cpu_dcache_clean_area);
+EXPORT_SYMBOL(cpu_set_pte);
+
+EXPORT_SYMBOL(__cpuc_dma_flush_range);
+EXPORT_SYMBOL(__cpuc_dma_clean_range);
diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S
new file mode 100644
index 00000000..9d296092
--- /dev/null
+++ b/arch/unicore32/mm/proc-ucv2.S
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/unicore32/mm/proc-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+
+#include "proc-macros.S"
+
+ENTRY(cpu_proc_fin)
+	stm.w	(lr), [sp-]
+	mov	ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
+	mov.a	asr, ip
+	b.l	__cpuc_flush_kern_all
+	ldm.w	(pc), [sp]+
+
+/*
+ *	cpu_reset(loc)
+ *
+ *	Perform a soft reset of the system.  Put the CPU into the
+ *	same state as it would be if it had been reset, and branch
+ *	to what would be the reset vector.
+ *
+ *	- loc   - location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_reset)
+	mov	ip, #0
+	movc	p0.c5, ip, #28			@ Cache invalidate all
+	nop8
+
+	movc	p0.c6, ip, #6			@ TLB invalidate all
+	nop8
+
+	movc	ip, p0.c1, #0			@ ctrl register
+	or	ip, ip, #0x2000			@ vector base address
+	andn	ip, ip, #0x000f			@ ............idam
+	movc	p0.c1, ip, #0			@ disable caches and mmu
+	nop
+	mov	pc, r0				@ jump to loc
+	nop8
+
+/*
+ *	cpu_do_idle()
+ *
+ *	Idle the processor (eg, wait for interrupt).
+ *
+ *	IRQs are already disabled.
+ */
+ENTRY(cpu_do_idle)
+	mov	r0, #0				@ PCI address
+	.rept	8
+	ldw	r1, [r0]
+	.endr
+	mov	pc, lr
+
+ENTRY(cpu_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	csub.a	r1, #MAX_AREA_SIZE
+	bsg	101f
+	mov	r9, #PAGE_SZ
+	sub	r9, r9, #1			@ PAGE_MASK
+1:	va2pa	r0, r10, r11, r12, r13		@ r10 is PA
+	b	3f
+2:	cand.a	r0, r9
+	beq	1b
+3:	movc	p0.c5, r10, #11			@ clean D entry
+	nop8
+	add	r0, r0, #CACHE_LINESIZE
+	add	r10, r10, #CACHE_LINESIZE
+	sub.a	r1, r1, #CACHE_LINESIZE
+	bua	2b
+	mov	pc, lr
+#endif
+101:	mov	ip, #0
+	movc	p0.c5, ip, #10			@ Dcache clean all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	cpu_do_switch_mm(pgd_phys)
+ *
+ *	Set the translation table base pointer to be pgd_phys
+ *
+ *	- pgd_phys - physical address of new pgd
+ *
+ *	It is assumed that:
+ *	- we are not using split page tables
+ */
+	.align	5
+ENTRY(cpu_do_switch_mm)
+	movc	p0.c2, r0, #0			@ update page table ptr
+	nop8
+
+	movc	p0.c6, ip, #6			@ TLB invalidate all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	cpu_set_pte(ptep, pte)
+ *
+ *	Set a level 2 translation table entry.
+ *
+ *	- ptep  - pointer to level 2 translation table entry
+ *	- pte   - PTE value to store
+ */
+	.align	5
+ENTRY(cpu_set_pte)
+	stw	r1, [r0]
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	sub	r2, r0, #PAGE_OFFSET
+	movc	p0.c5, r2, #11				@ Dcache clean line
+	nop8
+#else
+	mov	ip, #0
+	movc	p0.c5, ip, #10				@ Dcache clean all
+	nop8
+	@dcacheline_flush	r0, r2, ip
+#endif
+	mov	pc, lr
+
diff --git a/arch/unicore32/mm/tlb-ucv2.S b/arch/unicore32/mm/tlb-ucv2.S
new file mode 100644
index 00000000..061d455f
--- /dev/null
+++ b/arch/unicore32/mm/tlb-ucv2.S
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/unicore32/mm/tlb-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+/*
+ *	__cpu_flush_user_tlb_range(start, end, vma)
+ *
+ *	Invalidate a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- vma   - vma_struct describing address range
+ */
+ENTRY(__cpu_flush_user_tlb_range)
+#ifndef	CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+	mov	r0, r0 >> #PAGE_SHIFT		@ align address
+	mov	r0, r0 << #PAGE_SHIFT
+	vma_vm_flags r2, r2			@ get vma->vm_flags
+1:
+	movc	p0.c6, r0, #3
+	nop8
+
+	cand.a	r2, #VM_EXEC			@ Executable area ?
+	beq	2f
+
+	movc	p0.c6, r0, #5
+	nop8
+2:
+	add	r0, r0, #PAGE_SZ
+	csub.a	r0, r1
+	beb	1b
+#else
+	movc	p0.c6, r0, #2
+	nop8
+
+	cand.a	r2, #VM_EXEC			@ Executable area ?
+	beq	2f
+
+	movc	p0.c6, r0, #4
+	nop8
+2:
+#endif
+	mov	pc, lr
+
+/*
+ *	__cpu_flush_kern_tlb_range(start,end)
+ *
+ *	Invalidate a range of kernel TLB entries
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ */
+ENTRY(__cpu_flush_kern_tlb_range)
+#ifndef	CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
+	mov	r0, r0 >> #PAGE_SHIFT		@ align address
+	mov	r0, r0 << #PAGE_SHIFT
+1:
+	movc	p0.c6, r0, #3
+	nop8
+
+	movc	p0.c6, r0, #5
+	nop8
+
+	add	r0, r0, #PAGE_SZ
+	csub.a	r0, r1
+	beb	1b
+#else
+	movc	p0.c6, r0, #2
+	nop8
+
+	movc	p0.c6, r0, #4
+	nop8
+#endif
+	mov	pc, lr
+