Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 124 insertions, 0 deletions

diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
new file mode 100644
index 00000000..9f4dd35b
--- /dev/null
+++ b/arch/blackfin/mach-common/cache.S
@@ -0,0 +1,124 @@
+/*
+ * Blackfin cache control code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+
+/* 05000443 - IFLUSH cannot be last instruction in hardware loop */
+#if ANOMALY_05000443
+# define BROK_FLUSH_INST "IFLUSH"
+#else
+# define BROK_FLUSH_INST "no anomaly! yeah!"
+#endif
+
+/* Since all L1 caches work the same way, we use the same method for flushing
+ * them.  Only the actual flush instruction differs.  We write this in asm as
+ * GCC can be hard to coax into writing nice hardware loops.
+ *
+ * Also, we assume the following register setup:
+ * R0 = start address
+ * R1 = end address
+ */
+.macro do_flush flushins:req label
+
+	R2 = -L1_CACHE_BYTES;
+
+	/* start = (start & -L1_CACHE_BYTES) */
+	R0 = R0 & R2;
+
+	/* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
+	R1 += -1;
+	R1 = R1 & R2;
+	R1 += L1_CACHE_BYTES;
+
+	/* count = (end - start) >> L1_CACHE_SHIFT */
+	R2 = R1 - R0;
+	R2 >>= L1_CACHE_SHIFT;
+	P1 = R2;
+
+.ifnb \label
+\label :
+.endif
+	P0 = R0;
+
+	LSETUP (1f, 2f) LC1 = P1;
+1:
+.ifeqs "\flushins", BROK_FLUSH_INST
+	\flushins [P0++];
+	nop;
+	nop;
+2:	nop;
+.else
+2:	\flushins [P0++];
+.endif
+
+	RTS;
+.endm
+
+#ifdef CONFIG_ICACHE_FLUSH_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Invalidate all instruction cache lines assocoiated with this memory area */
+#ifdef CONFIG_SMP
+# define _blackfin_icache_flush_range _blackfin_icache_flush_range_l1
+#endif
+ENTRY(_blackfin_icache_flush_range)
+	do_flush IFLUSH
+ENDPROC(_blackfin_icache_flush_range)
+
+#ifdef CONFIG_SMP
+.text
+# undef _blackfin_icache_flush_range
+ENTRY(_blackfin_icache_flush_range)
+	p0.L = LO(DSPID);
+	p0.H = HI(DSPID);
+	r3 = [p0];
+	r3 = r3.b (z);
+	p2 = r3;
+	p0.L = _blackfin_iflush_l1_entry;
+	p0.H = _blackfin_iflush_l1_entry;
+	p0 = p0 + (p2 << 2);
+	p1 = [p0];
+	jump (p1);
+ENDPROC(_blackfin_icache_flush_range)
+#endif
+
+#ifdef CONFIG_DCACHE_FLUSH_L1
+.section .l1.text
+#else
+.text
+#endif
+
+/* Throw away all D-cached data in specified region without any obligation to
+ * write them back.  Since the Blackfin ISA does not have an "invalidate"
+ * instruction, we use flush/invalidate.  Perhaps as a speed optimization we
+ * could bang on the DTEST MMRs ...
+ */
+ENTRY(_blackfin_dcache_invalidate_range)
+	do_flush FLUSHINV
+ENDPROC(_blackfin_dcache_invalidate_range)
+
+/* Flush all data cache lines assocoiated with this memory area */
+ENTRY(_blackfin_dcache_flush_range)
+	do_flush FLUSH, .Ldfr
+ENDPROC(_blackfin_dcache_flush_range)
+
+/* Our headers convert the page structure to an address, so just need to flush
+ * its contents like normal.  We know the start address is page aligned (which
+ * greater than our cache alignment), as is the end address.  So just jump into
+ * the middle of the dcache flush function.
+ */
+ENTRY(_blackfin_dflush_page)
+	P1 = 1 << (PAGE_SHIFT - L1_CACHE_SHIFT);
+	jump .Ldfr;
+ENDPROC(_blackfin_dflush_page)