Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

24 files changed, 6010 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig
new file mode 100644
index 00000000..4c572443
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Kconfig
@@ -0,0 +1,95 @@
+if (BF533 || BF532 || BF531)
+
+source "arch/blackfin/mach-bf533/boards/Kconfig"
+
+menu "BF533/2/1 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config UART_ERROR
+	int "UART ERROR"
+	default 7
+config SPORT0_ERROR
+	int "SPORT0 ERROR"
+	default 7
+config SPI_ERROR
+	int "SPI ERROR"
+	default 7
+config SPORT1_ERROR
+	int "SPORT1 ERROR"
+	default 7
+config PPI_ERROR
+	int "PPI ERROR"
+	default 7
+config DMA_ERROR
+	int "DMA ERROR"
+	default 7
+config PLLWAKE_ERROR
+	int "PLL WAKEUP ERROR"
+	default 7
+
+config RTC_ERROR
+	int "RTC ERROR"
+	default 8
+config DMA0_PPI
+	int "DMA0 PPI"
+	default 8
+
+config DMA1_SPORT0RX
+	int "DMA1 (SPORT0 RX)"
+	default 9
+config DMA2_SPORT0TX
+	int "DMA2 (SPORT0 TX)"
+	default 9
+config DMA3_SPORT1RX
+	int "DMA3 (SPORT1 RX)"
+	default 9
+config DMA4_SPORT1TX
+	int "DMA4 (SPORT1 TX)"
+	default 9
+config DMA5_SPI
+	int "DMA5 (SPI)"
+	default 10
+config DMA6_UARTRX
+	int "DMA6 (UART0 RX)"
+	default 10
+config DMA7_UARTTX
+	int "DMA7 (UART0 TX)"
+	default 10
+config TIMER0
+	int "TIMER0"
+	default 7 if TICKSOURCE_GPTMR0
+	default 8
+config TIMER1
+	int "TIMER1"
+	default 11
+config TIMER2
+	int "TIMER2"
+	default 11
+config PFA
+	int "PF Interrupt A"
+	default 12
+config PFB
+	int "PF Interrupt B"
+	default 12
+config MEMDMA0
+	int "MEMORY DMA0"
+	default 13
+config MEMDMA1
+	int "MEMORY DMA1"
+	default 13
+config WDTIMER
+	int "WATCH DOG TIMER"
+	default 13
+
+	help
+	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
+	  This applies to all the above.  It is not recommended to assign the
+	  highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile
new file mode 100644
index 00000000..874840f7
--- /dev/null
+++ b/arch/blackfin/mach-bf533/Makefile
@@ -0,0 +1,5 @@
+#
+# arch/blackfin/mach-bf533/Makefile
+#
+
+obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
new file mode 100644
index 00000000..6cb7b3ed
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -0,0 +1,452 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2007-2008 HV Sistemas S.L.
+ *                      Javier Herrero <jherrero@hvsistemas.es>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "HV Sistemas H8606";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+*  Driver needs to know address, irq and flag pin.
+ */
+ #if	defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x20300000,
+		.end	= 0x20300002,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x20300004,
+		.end	= 0x20300006,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_PF10,
+		.end	= IRQ_PF10,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		           IORESOURCE_IRQ_SHAREABLE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+    .id			= 0,
+    .name		= "dm9000",
+    .resource		= dm9000_resources,
+    .num_resources	= ARRAY_SIZE(dm9000_resources),
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PROG_INTB,
+		.end = IRQ_PROG_INTB,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF10,
+		.end = IRQ_PF10,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader (spi)",
+		.size = 0x40000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "fpga (spi)",
+		.size =   0x30000,
+		.offset = 0x40000
+	}, {
+		.name = "linux kernel (spi)",
+		.size =   0x150000,
+		.offset =  0x70000
+	}, {
+		.name = "jffs2 root file system (spi)",
+		.size =   0x640000,
+		.offset = 0x1c0000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		/* this value is the baudrate divisor */
+		.max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 16,
+		.bus_num = 1,
+		.chip_select = 4,
+	},
+#endif
+
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+
+#include <linux/serial_8250.h>
+#include <linux/serial.h>
+
+/*
+ * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010.
+ * running at half system clock, both with interrupt output or-ed to PF8. Change to
+ * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus
+ */
+
+static struct plat_serial8250_port serial8250_platform_data [] = {
+	{
+		.membase = (void *)0x20200000,
+		.mapbase = 0x20200000,
+		.irq = IRQ_PF8,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+		.iotype = UPIO_MEM,
+		.regshift = 1,
+		.uartclk = 66666667,
+	}, {
+		.membase = (void *)0x20200010,
+		.mapbase = 0x20200010,
+		.irq = IRQ_PF8,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+		.iotype = UPIO_MEM,
+		.regshift = 1,
+		.uartclk = 66666667,
+	}, {
+	}
+};
+
+static struct platform_device serial8250_device = {
+	.id		= PLAT8250_DEV_PLATFORM,
+	.name		= "serial8250",
+	.dev		= {
+		.platform_data = serial8250_platform_data,
+	},
+};
+
+#endif
+
+#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+
+/*
+ * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
+ * interrupt output wired to PF9. Change to suit different FPGA configuration
+ */
+
+static struct resource opencores_kbd_resources[] = {
+	[0] = {
+		.start	= 0x20200030,
+		.end	= 0x20300030 + 2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device opencores_kbd_device = {
+	.id		= -1,
+	.name		= "opencores-kbd",
+	.resource	= opencores_kbd_resources,
+	.num_resources	= ARRAY_SIZE(opencores_kbd_resources),
+};
+#endif
+
+static struct platform_device *h8606_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if	defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+	&dm9000_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	&serial8250_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+	&opencores_kbd_device,
+#endif
+};
+
+static int __init H8606_init(void)
+{
+	printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+	return 0;
+}
+
+arch_initcall(H8606_init);
+
+static struct platform_device *H8606_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(H8606_early_devices,
+		ARRAY_SIZE(H8606_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
new file mode 100644
index 00000000..8d8b3e73
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -0,0 +1,41 @@
+choice
+	prompt "System type"
+	default BFIN533_STAMP
+	help
+	  Select your board!
+
+config BFIN533_EZKIT
+	bool "BF533-EZKIT"
+	help
+	  BF533-EZKIT-LITE board support.
+
+config BFIN533_STAMP
+	bool "BF533-STAMP"
+	help
+	  BF533-STAMP board support.
+
+config BLACKSTAMP
+	bool "BlackStamp"
+	help
+	  Support for the BlackStamp board.  Hardware info available at
+	  http://blackfin.uclinux.org/gf/project/blackstamp/
+
+config BFIN533_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF533"
+	depends on (BF533)
+	help
+	  CM-BF533 support for EVAL- and DEV-Board.
+
+config H8606_HVSISTEMAS
+	bool "HV Sistemas H8606"
+	depends on (BF532)
+	help
+	  HV Sistemas H8606 board support.
+
+config BFIN532_IP0X
+	bool "IP04/IP08 IP-PBX"
+	depends on (BF532)
+	help
+	  Core support for IP04/IP04 open hardware IP-PBX.
+
+endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
new file mode 100644
index 00000000..ff1e832f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -0,0 +1,10 @@
+#
+# arch/blackfin/mach-bf533/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
+obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
+obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP)               += blackstamp.o
+obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
new file mode 100644
index 00000000..de44a376
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -0,0 +1,513 @@
+/*
+ * Board Info File for the BlackStamp
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *                2008 Benjamin Matthews <bmat@lle.rochester.edu>
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * More info about the BlackStamp at:
+ * 	http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF8,
+	.scl_pin		= GPIO_PF9,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+}; /* This hasn't actually been used these pins
+    * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+};
+
+static int __init blackstamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
+#endif
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(blackstamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
new file mode 100644
index 00000000..fe47e048
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -0,0 +1,582 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *           2008-2009 Bluetechnix
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF533";
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+/* all SPI peripherals info goes here */
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80",       /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,               /* Framework bus number */
+		.chip_select = 1,           /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF0,
+		.end = IRQ_PF0,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x20308000,
+		.end = 0x20308000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF6,
+		.end = IRQ_PF6,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux+rootfs(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
+
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf533_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+	&smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&para_flash_device,
+#endif
+};
+
+static int __init cm_bf533_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf533_init);
+
+static struct platform_device *cm_bf533_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(cm_bf533_early_devices,
+		ARRAY_SIZE(cm_bf533_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
new file mode 100644
index 00000000..07811c20
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -0,0 +1,553 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF533-EZKIT";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  USB-LAN EzExtender board
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20310300,
+		.end = 0x20310300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF9,
+		.end = IRQ_PF9,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions_a[] = {
+	{
+		.name       = "bootloader(nor a)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor a)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data ezkit_flash_data_a = {
+	.width      = 2,
+	.parts      = ezkit_partitions_a,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions_a),
+};
+
+static struct resource ezkit_flash_resource_a = {
+	.start = 0x20000000,
+	.end   = 0x200fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device_a = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+	{
+		.name   = "file system(nor b)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data ezkit_flash_data_b = {
+	.width      = 2,
+	.parts      = ezkit_partitions_b,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions_b),
+};
+
+static struct resource ezkit_flash_resource_b = {
+	.start = 0x20100000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device_b = {
+	.name          = "physmap-flash",
+	.id            = 4,
+	.dev = {
+		.platform_data = &ezkit_flash_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource_b,
+};
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram sram_data_a = {
+	.mapname   = "Flash A SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_a = {
+	.start = 0x20240000,
+	.end   = 0x2024ffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_a = {
+	.name          = "mtd-ram",
+	.id            = 8,
+	.dev = {
+		.platform_data = &sram_data_a,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_a,
+};
+
+static struct platdata_mtd_ram sram_data_b = {
+	.mapname   = "Flash B SRAM",
+	.bankwidth = 2,
+};
+
+static struct resource sram_resource_b = {
+	.start = 0x202c0000,
+	.end   = 0x202cffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_b = {
+	.name          = "mtd-ram",
+	.id            = 9,
+	.dev = {
+		.platform_data = &sram_data_b,
+	},
+	.num_resources = 1,
+	.resource      = &sram_resource_b,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"},
+	{BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF1,
+	.scl_pin		= GPIO_PF0,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+};
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device_a,
+	&ezkit_flash_device_b,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+	&sram_device_a,
+	&sram_device_b,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
+};
+
+static int __init ezkit_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	return 0;
+}
+
+arch_initcall(ezkit_init);
+
+static struct platform_device *ezkit_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ezkit_early_devices,
+		ARRAY_SIZE(ezkit_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
new file mode 100644
index 00000000..e303dae4
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -0,0 +1,319 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2007 David Rowe
+ *                2006 Intratrade Ltd.
+ *                     Ivan Danov <idanov@gmail.com>
+ *                2005 National ICT Australia (NICTA)
+ *                     Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "IP04/IP08";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_BFIN532_IP0X)
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+
+#include <linux/dm9000.h>
+
+static struct resource dm9000_resource1[] = {
+	{
+		.start = 0x20100000,
+		.end   = 0x20100000 + 1,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = 0x20100000 + 2,
+		.end   = 0x20100000 + 3,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = IRQ_PF15,
+		.end   = IRQ_PF15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+static struct resource dm9000_resource2[] = {
+	{
+		.start = 0x20200000,
+		.end   = 0x20200000 + 1,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = 0x20200000 + 2,
+		.end   = 0x20200000 + 3,
+		.flags = IORESOURCE_MEM
+	},{
+		.start = IRQ_PF14,
+		.end   = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+	}
+};
+
+/*
+* for the moment we limit ourselves to 16bit IO until some
+* better IO routines can be written and tested
+*/
+static struct dm9000_plat_data dm9000_platdata1 = {
+	.flags          = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device1 = {
+	.name           = "dm9000",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(dm9000_resource1),
+	.resource       = dm9000_resource1,
+	.dev            = {
+		.platform_data = &dm9000_platdata1,
+	}
+};
+
+static struct dm9000_plat_data dm9000_platdata2 = {
+	.flags          = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device2 = {
+	.name           = "dm9000",
+	.id             = 1,
+	.num_resources  = ARRAY_SIZE(dm9000_resource2),
+	.resource       = dm9000_resource2,
+	.dev            = {
+		.platform_data = &dm9000_platdata2,
+	}
+};
+
+#endif
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,		/* if 1 - block!!! */
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 2,
+		.bus_num = 1,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
+	},
+#endif
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+};
+
+static struct platform_device spi_bfin_master_device = {
+	.name = "bfin-spi-master",
+	.id = 1, /* Bus number */
+	.dev = {
+		.platform_data = &spi_bfin_master_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20300000,
+		.end   = 0x20300000 + 1,
+		.flags = IORESOURCE_MEM,
+	},{
+		.start = 0x20300000 + 2,
+		.end   = 0x20300000 + 3,
+		.flags = IORESOURCE_MEM,
+	},{
+		.start = IRQ_PF11,
+		.end   = IRQ_PF11,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,		/* external OC */
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+
+static struct platform_device *ip0x_devices[] __initdata = {
+#if defined(CONFIG_BFIN532_IP0X)
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+	&dm9000_device1,
+	&dm9000_device2,
+#endif
+#endif
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	&spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+};
+
+static int __init ip0x_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices));
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+	return 0;
+}
+
+arch_initcall(ip0x_init);
+
+static struct platform_device *ip0x_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ip0x_early_devices,
+		ARRAY_SIZE(ip0x_early_devices));
+}
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
new file mode 100644
index 00000000..ce88a716
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -0,0 +1,885 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF533-STAMP";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 1,
+		.flags = IORESOURCE_BUS,
+	}, {
+		.start = IRQ_PF10,
+		.end = IRQ_PF10,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+static struct mtd_partition stamp_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data stamp_flash_data = {
+	.width    = 2,
+	.parts    = stamp_partitions,
+	.nr_parts = ARRAY_SIZE(stamp_partitions),
+};
+
+static struct resource stamp_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x203fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x7BB07BB0,	/* AMBCTL0 setting when accessing flash */
+		.end   = 0x7BB07BB0,	/* AMBCTL1 setting when accessing flash */
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = GPIO_PF0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device stamp_flash_device = {
+	.name          = "bfin-async-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &stamp_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(stamp_flash_resource),
+	.resource      = stamp_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+		"mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.pio_interrupt = 0,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
+	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+	{
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = "ad1836", /* only includes chip name for the moment */
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+	},
+#endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = BFIN_UART_THR,
+		.end = BFIN_UART_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF5, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF6, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF8, 0, "gpio-keys: BTN2"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= GPIO_PF2,
+	.scl_pin		= GPIO_PF3,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 10,
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+	{
+		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
+		.irq = 39,
+	},
+#endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.irq = 39,
+	},
+#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
+	defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) \
+	|| defined(CONFIG_SND_BF5XX_AC97) || \
+	defined(CONFIG_SND_BF5XX_AC97_MODULE)
+
+#include <asm/bfin_sport.h>
+
+#define SPORT_REQ(x) \
+	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
+		P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
+
+static const u16 bfin_snd_pin[][7] = {
+	SPORT_REQ(0),
+	SPORT_REQ(1),
+};
+
+static struct bfin_snd_platform_data bfin_snd_data[] = {
+	{
+		.pin_req = &bfin_snd_pin[0][0],
+	},
+	{
+		.pin_req = &bfin_snd_pin[1][0],
+	},
+};
+
+#define BFIN_SND_RES(x) \
+	[x] = { \
+		{ \
+			.start = SPORT##x##_TCR1, \
+			.end = SPORT##x##_TCR1, \
+			.flags = IORESOURCE_MEM \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_RX, \
+			.end = CH_SPORT##x##_RX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = CH_SPORT##x##_TX, \
+			.end = CH_SPORT##x##_TX, \
+			.flags = IORESOURCE_DMA, \
+		}, \
+		{ \
+			.start = IRQ_SPORT##x##_ERROR, \
+			.end = IRQ_SPORT##x##_ERROR, \
+			.flags = IORESOURCE_IRQ, \
+		} \
+	}
+
+static struct resource bfin_snd_resources[][4] = {
+	BFIN_SND_RES(0),
+	BFIN_SND_RES(1),
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s_pcm = {
+	.name = "bfin-i2s-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm_pcm = {
+	.name = "bfin-tdm-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97_pcm = {
+	.name = "bfin-ac97-pcm-audio",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+	defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+static const unsigned ad73311_gpio[] = {
+	GPIO_PF4,
+};
+
+static struct platform_device bfin_ad73311_machine = {
+	.name = "bfin-snd-ad73311",
+	.id = 1,
+	.dev = {
+		.platform_data = (void *)ad73311_gpio,
+	},
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+static struct platform_device bfin_ad73311_codec_device = {
+	.name = "ad73311",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+static struct platform_device bfin_ad74111_codec_device = {
+	.name = "ad74111",
+	.id = -1,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
+	defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \
+	defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
+	defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	.num_resources =
+		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
+	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
+	.dev = {
+		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
+	},
+};
+#endif
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
+	defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+	&stamp_flash_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s_pcm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm_pcm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97_pcm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
+	defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+	&bfin_ad73311_machine,
+#endif
+
+#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+	&bfin_ad73311_codec_device,
+#endif
+
+#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+	&bfin_ad74111_codec_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
+	defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_TDM) || \
+	defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
+	defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+	&bfin_ac97,
+#endif
+};
+
+static int __init net2272_init(void)
+{
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	int ret;
+
+	/* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
+	ret = gpio_request(GPIO_PF0, "net2272");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(GPIO_PF1, "net2272");
+	if (ret) {
+		gpio_free(GPIO_PF0);
+		return ret;
+	}
+
+	ret = gpio_request(GPIO_PF11, "net2272");
+	if (ret) {
+		gpio_free(GPIO_PF0);
+		gpio_free(GPIO_PF1);
+		return ret;
+	}
+
+	gpio_direction_output(GPIO_PF0, 0);
+	gpio_direction_output(GPIO_PF1, 1);
+
+	/* Reset the USB chip */
+	gpio_direction_output(GPIO_PF11, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PF11, 1);
+#endif
+
+	return 0;
+}
+
+static int __init stamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	/*
+	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
+	 * the bfin-async-map driver takes care of flipping between
+	 * flash and ethernet when necessary.
+	 */
+	ret = gpio_request(GPIO_PF0, "enet_cpld");
+	if (!ret) {
+		gpio_direction_output(GPIO_PF0, 1);
+		gpio_free(GPIO_PF0);
+	}
+#endif
+
+	if (net2272_init())
+		pr_warning("unable to configure net2272; it probably won't work\n");
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+static struct platform_device *stamp_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(stamp_early_devices,
+		ARRAY_SIZE(stamp_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround pull up on cpld / flash pin not being strong enough */
+	gpio_request(GPIO_PF0, "flash_cpld");
+	gpio_direction_output(GPIO_PF0, 0);
+}
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
new file mode 100644
index 00000000..1f5988d4
--- /dev/null
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -0,0 +1,78 @@
+/*
+ * simple DMA Implementation for Blackfin
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register * const dma_io_base_addr[MAX_DMA_CHANNELS] = {
+	(struct dma_register *) DMA0_NEXT_DESC_PTR,
+	(struct dma_register *) DMA1_NEXT_DESC_PTR,
+	(struct dma_register *) DMA2_NEXT_DESC_PTR,
+	(struct dma_register *) DMA3_NEXT_DESC_PTR,
+	(struct dma_register *) DMA4_NEXT_DESC_PTR,
+	(struct dma_register *) DMA5_NEXT_DESC_PTR,
+	(struct dma_register *) DMA6_NEXT_DESC_PTR,
+	(struct dma_register *) DMA7_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+	(struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+	int ret_irq = -1;
+
+	switch (channel) {
+	case CH_PPI:
+		ret_irq = IRQ_PPI;
+		break;
+
+	case CH_SPORT0_RX:
+		ret_irq = IRQ_SPORT0_RX;
+		break;
+
+	case CH_SPORT0_TX:
+		ret_irq = IRQ_SPORT0_TX;
+		break;
+
+	case CH_SPORT1_RX:
+		ret_irq = IRQ_SPORT1_RX;
+		break;
+
+	case CH_SPORT1_TX:
+		ret_irq = IRQ_SPORT1_TX;
+		break;
+
+	case CH_SPI:
+		ret_irq = IRQ_SPI;
+		break;
+
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
+		break;
+
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
+		break;
+
+	case CH_MEM_STREAM0_SRC:
+	case CH_MEM_STREAM0_DEST:
+		ret_irq = IRQ_MEM_DMA0;
+		break;
+
+	case CH_MEM_STREAM1_SRC:
+	case CH_MEM_STREAM1_DEST:
+		ret_irq = IRQ_MEM_DMA1;
+		break;
+	}
+	return ret_irq;
+}
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
new file mode 100644
index 00000000..03f2b409
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -0,0 +1,383 @@
+/*
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
+ *
+ * Copyright 2004-2011 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
+ */
+
+/* This file should be up to date with:
+ *  - Revision G, 05/23/2011; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* We do not support 0.1 or 0.2 silicon - sorry */
+#if __SILICON_REVISION__ < 3
+# error will not work on BF533 silicon version 0.0, 0.1, or 0.2
+#endif
+
+#if defined(__ADSPBF531__)
+# define ANOMALY_BF531 1
+#else
+# define ANOMALY_BF531 0
+#endif
+#if defined(__ADSPBF532__)
+# define ANOMALY_BF532 1
+#else
+# define ANOMALY_BF532 0
+#endif
+#if defined(__ADSPBF533__)
+# define ANOMALY_BF533 1
+#else
+# define ANOMALY_BF533 0
+#endif
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
+#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
+/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */
+#define ANOMALY_05000105 (__SILICON_REVISION__ > 2)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
+#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
+#define ANOMALY_05000166 (1)
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
+#define ANOMALY_05000167 (1)
+/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
+#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
+/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
+#define ANOMALY_05000180 (1)
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
+#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
+#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
+/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
+#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
+/* Restarting SPORT in Specific Modes May Cause Data Corruption */
+#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
+#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
+/* Current DMA Address Shows Wrong Value During Carry Fix */
+#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
+/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */
+#define ANOMALY_05000200 (__SILICON_REVISION__ == 3 || __SILICON_REVISION__ == 4)
+/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */
+#define ANOMALY_05000201 (__SILICON_REVISION__ == 3)
+/* Possible Infinite Stall with Specific Dual-DAG Situation */
+#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
+/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
+#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
+#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
+/* Recovery from "Brown-Out" Condition */
+#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
+/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */
+#define ANOMALY_05000208 (1)
+/* Speed Path in Computational Unit Affects Certain Instructions */
+#define ANOMALY_05000209 (__SILICON_REVISION__ < 4)
+/* UART TX Interrupt Masked Erroneously */
+#define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
+/* NMI Event at Boot Time Results in Unpredictable State */
+#define ANOMALY_05000219 (1)
+/* Incorrect Pulse-Width of UART Start Bit */
+#define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
+/* Scratchpad Memory Bank Reads May Return Incorrect Data */
+#define ANOMALY_05000227 (__SILICON_REVISION__ < 5)
+/* SPI Slave Boot Mode Modifies Registers from Reset Value */
+#define ANOMALY_05000229 (1)
+/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */
+#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
+/* UART STB Bit Incorrectly Affects Receiver Setting */
+#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
+/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 6)
+/* Incorrect Revision Number in DSPID Register */
+#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
+/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
+/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
+#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Data CPLBs Should Prevent False Hardware Errors */
+#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
+/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
+#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
+/* Maximum External Clock Speed for Timers */
+#define ANOMALY_05000253 (__SILICON_REVISION__ < 5)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (__SILICON_REVISION__ > 4)
+/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
+#define ANOMALY_05000255 (__SILICON_REVISION__ < 5)
+/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
+#define ANOMALY_05000257 (__SILICON_REVISION__ < 5)
+/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */
+#define ANOMALY_05000258 (__SILICON_REVISION__ < 5)
+/* ICPLB_STATUS MMR Register May Be Corrupted */
+#define ANOMALY_05000260 (__SILICON_REVISION__ < 5)
+/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */
+#define ANOMALY_05000261 (__SILICON_REVISION__ < 5)
+/* Stores To Data Cache May Be Lost */
+#define ANOMALY_05000262 (__SILICON_REVISION__ < 5)
+/* Hardware Loop Corrupted When Taking an ICPLB Exception */
+#define ANOMALY_05000263 (__SILICON_REVISION__ < 5)
+/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
+#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
+#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
+/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
+#define ANOMALY_05000270 (__SILICON_REVISION__ < 5)
+/* Spontaneous Reset of Internal Voltage Regulator */
+#define ANOMALY_05000271 (__SILICON_REVISION__ == 3)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* Writes to Synchronous SDRAM Memory May Be Lost */
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 6)
+/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
+#define ANOMALY_05000276 (1)
+/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
+/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
+/* False Hardware Error when ISR Context Is Not Restored */
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
+/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
+/* SPORTs May Receive Bad Data If FIFOs Fill Up */
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
+/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
+#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
+#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
+/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */
+#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
+#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
+/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
+#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 6)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 6)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* False Hardware Error when RETI Points to Invalid Memory */
+#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */
+#define ANOMALY_05000471 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
+#define ANOMALY_05000473 (1)
+/* Possible Lockup Condition when Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* PLL May Latch Incorrect Values Coming Out of Reset */
+#define ANOMALY_05000489 (1)
+/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
+#define ANOMALY_05000491 (1)
+/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
+#define ANOMALY_05000494 (1)
+/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
+#define ANOMALY_05000501 (1)
+
+/*
+ * These anomalies have been "phased" out of analog.com anomaly sheets and are
+ * here to show running on older silicon just isn't feasible.
+ */
+
+/* Internal voltage regulator can't be modified via register writes */
+#define ANOMALY_05000066 (__SILICON_REVISION__ < 2)
+/* Watchpoints (Hardware Breakpoints) are not supported */
+#define ANOMALY_05000067 (__SILICON_REVISION__ < 3)
+/* SDRAM PSSE bit cannot be set again after SDRAM Powerup */
+#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
+/* Writing FIO_DIR can corrupt a programmable flag's data */
+#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
+/* Timer Auto-Baud Mode requires the UART clock to be enabled. */
+#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
+/* Internal Clocking Modes on SPORT0 not supported */
+#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
+/* Internal voltage regulator does not wake up from an RTC wakeup */
+#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
+/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */
+#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
+/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */
+#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
+/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */
+#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
+/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
+#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
+/* 32-bit SPORT DMA will be word reversed */
+#define ANOMALY_05000098 (__SILICON_REVISION__ < 2)
+/* Incorrect status in the UART_IIR register */
+#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
+/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
+#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
+/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
+/* Incorrect Value Written to the Cycle Counters */
+#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
+/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */
+#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
+/* Programmable Flag (PF3) functionality not supported in all PPI modes */
+#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
+/* Data store can be lost when targeting a cache line fill */
+#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
+/* Reserved Bits in SYSCFG Register Not Set at Power-On */
+#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
+/* Infinite Core Stall */
+#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
+/* PPI_FSx may glitch when generated by the on chip Timers. */
+#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
+#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
+/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
+#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
+/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
+#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
+/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */
+#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
+/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
+#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
+/* Erroneous Exception when Enabling Cache */
+#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
+/* SPI clock polarity and phase bits incorrect during booting */
+#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
+/* DMEM_CONTROL<12> Is Not Set on Reset */
+#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
+/* SPI boot will not complete if there is a zero fill block in the loader file */
+#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
+/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */
+#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
+/* Allowing the SPORT RX FIFO to fill will cause an overflow */
+#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
+#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
+/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
+#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
+/* A read from external memory may return a wrong value with data cache enabled */
+#define ANOMALY_05000143 (__SILICON_REVISION__ < 3)
+/* DMA and TESTSET conflict when both are accessing external memory */
+#define ANOMALY_05000144 (__SILICON_REVISION__ < 3)
+/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */
+#define ANOMALY_05000145 (__SILICON_REVISION__ < 3)
+/* MDMA may lose the first few words of a descriptor chain */
+#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
+/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
+#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
+/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */
+#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
+/* Frame Delay in SPORT Multichannel Mode */
+#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
+/* SPORT TFS signal stays active in multichannel mode outside of valid channels */
+#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
+/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
+#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
+#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
+#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
+#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
+#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
+/* DMA vs Core accesses to external memory */
+#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
+/* Cache Fill Buffer Data lost */
+#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
+/* Overlapping Sequencer and Memory Stalls */
+#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
+#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
+/* Disabling the PPI Resets the PPI Configuration Registers */
+#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
+#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
+/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
+#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
+/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */
+#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
+/* Internal Voltage Regulator may not start up */
+#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000120 (0)
+#define ANOMALY_05000149 (0)
+#define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
+#define ANOMALY_05000220 (0)
+#define ANOMALY_05000248 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000274 (0)
+#define ANOMALY_05000287 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
+#define ANOMALY_05000380 (0)
+#define ANOMALY_05000383 (0)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000389 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000430 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
+#define ANOMALY_05000440 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
+#define ANOMALY_05000456 (0)
+#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000480 (0)
+#define ANOMALY_05000485 (0)
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
new file mode 100644
index 00000000..e3e05f8f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -0,0 +1,138 @@
+/*
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __MACH_BF533_H__
+#define __MACH_BF533_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15		0x8000
+#define IMASK_IVG14		0x4000
+#define IMASK_IVG13		0x2000
+#define IMASK_IVG12		0x1000
+
+#define IMASK_IVG11		0x0800
+#define IMASK_IVG10		0x0400
+#define IMASK_IVG9		0x0200
+#define IMASK_IVG8		0x0100
+
+#define IMASK_IVG7		0x0080
+#define IMASK_IVGTMR		0x0040
+#define IMASK_IVGHW		0x0020
+
+/***************************/
+
+
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
+
+#define WAY0_L			0x1
+#define WAY1_L			0x2
+#define WAY01_L			0x3
+#define WAY2_L			0x4
+#define WAY02_L			0x5
+#define	WAY12_L			0x6
+#define	WAY012_L		0x7
+
+#define	WAY3_L			0x8
+#define	WAY03_L			0x9
+#define	WAY13_L			0xA
+#define	WAY013_L		0xB
+
+#define	WAY32_L			0xC
+#define	WAY320_L		0xD
+#define	WAY321_L		0xE
+#define	WAYALL_L		0xF
+
+#define DMC_ENABLE (2<<2)	/*yes, 2, not 1 */
+
+/* IAR0 BIT FIELDS*/
+#define RTC_ERROR_BIT			0x0FFFFFFF
+#define UART_ERROR_BIT			0xF0FFFFFF
+#define SPORT1_ERROR_BIT		0xFF0FFFFF
+#define SPI_ERROR_BIT			0xFFF0FFFF
+#define SPORT0_ERROR_BIT		0xFFFF0FFF
+#define PPI_ERROR_BIT			0xFFFFF0FF
+#define DMA_ERROR_BIT			0xFFFFFF0F
+#define PLLWAKE_ERROR_BIT		0xFFFFFFFF
+
+/* IAR1 BIT FIELDS*/
+#define DMA7_UARTTX_BIT			0x0FFFFFFF
+#define DMA6_UARTRX_BIT			0xF0FFFFFF
+#define DMA5_SPI_BIT			0xFF0FFFFF
+#define DMA4_SPORT1TX_BIT		0xFFF0FFFF
+#define DMA3_SPORT1RX_BIT		0xFFFF0FFF
+#define DMA2_SPORT0TX_BIT		0xFFFFF0FF
+#define DMA1_SPORT0RX_BIT		0xFFFFFF0F
+#define DMA0_PPI_BIT			0xFFFFFFFF
+
+/* IAR2 BIT FIELDS*/
+#define WDTIMER_BIT			0x0FFFFFFF
+#define MEMDMA1_BIT			0xF0FFFFFF
+#define MEMDMA0_BIT			0xFF0FFFFF
+#define PFB_BIT				0xFFF0FFFF
+#define PFA_BIT				0xFFFF0FFF
+#define TIMER2_BIT			0xFFFFF0FF
+#define TIMER1_BIT			0xFFFFFF0F
+#define TIMER0_BIT		        0xFFFFFFFF
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL	((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL	((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF533
+#define CPU "BF533"
+#define CPUID 0x27a5
+#endif
+#ifdef CONFIG_BF532
+#define CPU "BF532"
+#define CPUID 0x27a5
+#endif
+#ifdef CONFIG_BF531
+#define CPU "BF531"
+#define CPUID 0x27a5
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif				/* __MACH_BF533_H__  */
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
new file mode 100644
index 00000000..08072c86
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial.h
@@ -0,0 +1,14 @@
+/*
+ * mach/bfin_serial.h - Blackfin UART/Serial definitions
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_SERIAL_H__
+#define __BFIN_MACH_SERIAL_H__
+
+#define BFIN_UART_NR_PORTS	1
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
new file mode 100644
index 00000000..e366207f
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF533_FAMILY
+
+#include "bf533.h"
+#include "anomaly.h"
+
+#include <asm/def_LPBlackfin.h>
+#include "defBF532.h"
+
+#ifndef __ASSEMBLY__
+# include <asm/cdef_LPBlackfin.h>
+# include "cdefBF532.h"
+#endif
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
new file mode 100644
index 00000000..fd0cbe4d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -0,0 +1,682 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _CDEF_BF532_H
+#define _CDEF_BF532_H
+
+/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */
+#define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
+#define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
+#define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
+#define bfin_read_CHIPID()                   bfin_read32(CHIPID)
+#define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
+#define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
+
+/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_IMASK()                bfin_read32(SIC_IMASK)
+#define bfin_write_SIC_IMASK(val)            bfin_write32(SIC_IMASK,val)
+#define bfin_read_SIC_ISR()                  bfin_read32(SIC_ISR)
+#define bfin_write_SIC_ISR(val)              bfin_write32(SIC_ISR,val)
+#define bfin_read_SIC_IWR()                  bfin_read32(SIC_IWR)
+#define bfin_write_SIC_IWR(val)              bfin_write32(SIC_IWR,val)
+
+/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */
+#define bfin_read_WDOG_CTL()                 bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val)             bfin_write16(WDOG_CTL,val)
+#define bfin_read_WDOG_CNT()                 bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val)             bfin_write32(WDOG_CNT,val)
+#define bfin_read_WDOG_STAT()                bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val)            bfin_write32(WDOG_STAT,val)
+
+/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */
+#define bfin_read_RTC_STAT()                 bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val)             bfin_write32(RTC_STAT,val)
+#define bfin_read_RTC_ICTL()                 bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val)             bfin_write16(RTC_ICTL,val)
+#define bfin_read_RTC_ISTAT()                bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val)            bfin_write16(RTC_ISTAT,val)
+#define bfin_read_RTC_SWCNT()                bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val)            bfin_write16(RTC_SWCNT,val)
+#define bfin_read_RTC_ALARM()                bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val)            bfin_write32(RTC_ALARM,val)
+#define bfin_read_RTC_FAST()                 bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val)             bfin_write16(RTC_FAST,val)
+#define bfin_read_RTC_PREN()                 bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val)             bfin_write16(RTC_PREN,val)
+
+/* DMA Traffic controls */
+#define bfin_read_DMAC_TC_PER()              bfin_read16(DMAC_TC_PER)
+#define bfin_write_DMAC_TC_PER(val)          bfin_write16(DMAC_TC_PER,val)
+#define bfin_read_DMAC_TC_CNT()              bfin_read16(DMAC_TC_CNT)
+#define bfin_write_DMAC_TC_CNT(val)          bfin_write16(DMAC_TC_CNT,val)
+
+/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */
+#define bfin_read_FIO_DIR()                  bfin_read16(FIO_DIR)
+#define bfin_write_FIO_DIR(val)              bfin_write16(FIO_DIR,val)
+#define bfin_read_FIO_MASKA_C()              bfin_read16(FIO_MASKA_C)
+#define bfin_write_FIO_MASKA_C(val)          bfin_write16(FIO_MASKA_C,val)
+#define bfin_read_FIO_MASKA_S()              bfin_read16(FIO_MASKA_S)
+#define bfin_write_FIO_MASKA_S(val)          bfin_write16(FIO_MASKA_S,val)
+#define bfin_read_FIO_MASKB_C()              bfin_read16(FIO_MASKB_C)
+#define bfin_write_FIO_MASKB_C(val)          bfin_write16(FIO_MASKB_C,val)
+#define bfin_read_FIO_MASKB_S()              bfin_read16(FIO_MASKB_S)
+#define bfin_write_FIO_MASKB_S(val)          bfin_write16(FIO_MASKB_S,val)
+#define bfin_read_FIO_POLAR()                bfin_read16(FIO_POLAR)
+#define bfin_write_FIO_POLAR(val)            bfin_write16(FIO_POLAR,val)
+#define bfin_read_FIO_EDGE()                 bfin_read16(FIO_EDGE)
+#define bfin_write_FIO_EDGE(val)             bfin_write16(FIO_EDGE,val)
+#define bfin_read_FIO_BOTH()                 bfin_read16(FIO_BOTH)
+#define bfin_write_FIO_BOTH(val)             bfin_write16(FIO_BOTH,val)
+#define bfin_read_FIO_INEN()                 bfin_read16(FIO_INEN)
+#define bfin_write_FIO_INEN(val)             bfin_write16(FIO_INEN,val)
+#define bfin_read_FIO_MASKA_D()              bfin_read16(FIO_MASKA_D)
+#define bfin_write_FIO_MASKA_D(val)          bfin_write16(FIO_MASKA_D,val)
+#define bfin_read_FIO_MASKA_T()              bfin_read16(FIO_MASKA_T)
+#define bfin_write_FIO_MASKA_T(val)          bfin_write16(FIO_MASKA_T,val)
+#define bfin_read_FIO_MASKB_D()              bfin_read16(FIO_MASKB_D)
+#define bfin_write_FIO_MASKB_D(val)          bfin_write16(FIO_MASKB_D,val)
+#define bfin_read_FIO_MASKB_T()              bfin_read16(FIO_MASKB_T)
+#define bfin_write_FIO_MASKB_T(val)          bfin_write16(FIO_MASKB_T,val)
+
+#if ANOMALY_05000311
+/* Keep at the CPP expansion to avoid circular header dependency loops */
+#define BFIN_WRITE_FIO_FLAG(name, val) \
+	do { \
+		unsigned long __flags; \
+		__flags = hard_local_irq_save(); \
+		bfin_write16(FIO_FLAG_##name, val); \
+		bfin_read_CHIPID(); \
+		hard_local_irq_restore(__flags); \
+	} while (0)
+#define bfin_write_FIO_FLAG_D(val)           BFIN_WRITE_FIO_FLAG(D, val)
+#define bfin_write_FIO_FLAG_C(val)           BFIN_WRITE_FIO_FLAG(C, val)
+#define bfin_write_FIO_FLAG_S(val)           BFIN_WRITE_FIO_FLAG(S, val)
+#define bfin_write_FIO_FLAG_T(val)           BFIN_WRITE_FIO_FLAG(T, val)
+
+#define BFIN_READ_FIO_FLAG(name) \
+	({ \
+		unsigned long __flags; \
+		u16 __ret; \
+		__flags = hard_local_irq_save(); \
+		__ret = bfin_read16(FIO_FLAG_##name); \
+		bfin_read_CHIPID(); \
+		hard_local_irq_restore(__flags); \
+		__ret; \
+	})
+#define bfin_read_FIO_FLAG_D()               BFIN_READ_FIO_FLAG(D)
+#define bfin_read_FIO_FLAG_C()               BFIN_READ_FIO_FLAG(C)
+#define bfin_read_FIO_FLAG_S()               BFIN_READ_FIO_FLAG(S)
+#define bfin_read_FIO_FLAG_T()               BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D, val)
+#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C, val)
+#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S, val)
+#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T, val)
+#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
+#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
+#endif
+
+/* DMA Controller */
+#define bfin_read_DMA0_CONFIG()              bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val)          bfin_write16(DMA0_CONFIG,val)
+#define bfin_read_DMA0_NEXT_DESC_PTR()       bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val)   bfin_write32(DMA0_NEXT_DESC_PTR,val)
+#define bfin_read_DMA0_START_ADDR()          bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val)      bfin_write32(DMA0_START_ADDR,val)
+#define bfin_read_DMA0_X_COUNT()             bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val)         bfin_write16(DMA0_X_COUNT,val)
+#define bfin_read_DMA0_Y_COUNT()             bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val)         bfin_write16(DMA0_Y_COUNT,val)
+#define bfin_read_DMA0_X_MODIFY()            bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val)        bfin_write16(DMA0_X_MODIFY,val)
+#define bfin_read_DMA0_Y_MODIFY()            bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val)        bfin_write16(DMA0_Y_MODIFY,val)
+#define bfin_read_DMA0_CURR_DESC_PTR()       bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val)   bfin_write32(DMA0_CURR_DESC_PTR,val)
+#define bfin_read_DMA0_CURR_ADDR()           bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val)       bfin_write32(DMA0_CURR_ADDR,val)
+#define bfin_read_DMA0_CURR_X_COUNT()        bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val)    bfin_write16(DMA0_CURR_X_COUNT,val)
+#define bfin_read_DMA0_CURR_Y_COUNT()        bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val)    bfin_write16(DMA0_CURR_Y_COUNT,val)
+#define bfin_read_DMA0_IRQ_STATUS()          bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val)      bfin_write16(DMA0_IRQ_STATUS,val)
+#define bfin_read_DMA0_PERIPHERAL_MAP()      bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val)  bfin_write16(DMA0_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA1_CONFIG()              bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val)          bfin_write16(DMA1_CONFIG,val)
+#define bfin_read_DMA1_NEXT_DESC_PTR()       bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val)   bfin_write32(DMA1_NEXT_DESC_PTR,val)
+#define bfin_read_DMA1_START_ADDR()          bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val)      bfin_write32(DMA1_START_ADDR,val)
+#define bfin_read_DMA1_X_COUNT()             bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val)         bfin_write16(DMA1_X_COUNT,val)
+#define bfin_read_DMA1_Y_COUNT()             bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val)         bfin_write16(DMA1_Y_COUNT,val)
+#define bfin_read_DMA1_X_MODIFY()            bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val)        bfin_write16(DMA1_X_MODIFY,val)
+#define bfin_read_DMA1_Y_MODIFY()            bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val)        bfin_write16(DMA1_Y_MODIFY,val)
+#define bfin_read_DMA1_CURR_DESC_PTR()       bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val)   bfin_write32(DMA1_CURR_DESC_PTR,val)
+#define bfin_read_DMA1_CURR_ADDR()           bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val)       bfin_write32(DMA1_CURR_ADDR,val)
+#define bfin_read_DMA1_CURR_X_COUNT()        bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val)    bfin_write16(DMA1_CURR_X_COUNT,val)
+#define bfin_read_DMA1_CURR_Y_COUNT()        bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val)    bfin_write16(DMA1_CURR_Y_COUNT,val)
+#define bfin_read_DMA1_IRQ_STATUS()          bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val)      bfin_write16(DMA1_IRQ_STATUS,val)
+#define bfin_read_DMA1_PERIPHERAL_MAP()      bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val)  bfin_write16(DMA1_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA2_CONFIG()              bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val)          bfin_write16(DMA2_CONFIG,val)
+#define bfin_read_DMA2_NEXT_DESC_PTR()       bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val)   bfin_write32(DMA2_NEXT_DESC_PTR,val)
+#define bfin_read_DMA2_START_ADDR()          bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val)      bfin_write32(DMA2_START_ADDR,val)
+#define bfin_read_DMA2_X_COUNT()             bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val)         bfin_write16(DMA2_X_COUNT,val)
+#define bfin_read_DMA2_Y_COUNT()             bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val)         bfin_write16(DMA2_Y_COUNT,val)
+#define bfin_read_DMA2_X_MODIFY()            bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val)        bfin_write16(DMA2_X_MODIFY,val)
+#define bfin_read_DMA2_Y_MODIFY()            bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val)        bfin_write16(DMA2_Y_MODIFY,val)
+#define bfin_read_DMA2_CURR_DESC_PTR()       bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val)   bfin_write32(DMA2_CURR_DESC_PTR,val)
+#define bfin_read_DMA2_CURR_ADDR()           bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val)       bfin_write32(DMA2_CURR_ADDR,val)
+#define bfin_read_DMA2_CURR_X_COUNT()        bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val)    bfin_write16(DMA2_CURR_X_COUNT,val)
+#define bfin_read_DMA2_CURR_Y_COUNT()        bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val)    bfin_write16(DMA2_CURR_Y_COUNT,val)
+#define bfin_read_DMA2_IRQ_STATUS()          bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val)      bfin_write16(DMA2_IRQ_STATUS,val)
+#define bfin_read_DMA2_PERIPHERAL_MAP()      bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val)  bfin_write16(DMA2_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA3_CONFIG()              bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val)          bfin_write16(DMA3_CONFIG,val)
+#define bfin_read_DMA3_NEXT_DESC_PTR()       bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val)   bfin_write32(DMA3_NEXT_DESC_PTR,val)
+#define bfin_read_DMA3_START_ADDR()          bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val)      bfin_write32(DMA3_START_ADDR,val)
+#define bfin_read_DMA3_X_COUNT()             bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val)         bfin_write16(DMA3_X_COUNT,val)
+#define bfin_read_DMA3_Y_COUNT()             bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val)         bfin_write16(DMA3_Y_COUNT,val)
+#define bfin_read_DMA3_X_MODIFY()            bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val)        bfin_write16(DMA3_X_MODIFY,val)
+#define bfin_read_DMA3_Y_MODIFY()            bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val)        bfin_write16(DMA3_Y_MODIFY,val)
+#define bfin_read_DMA3_CURR_DESC_PTR()       bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val)   bfin_write32(DMA3_CURR_DESC_PTR,val)
+#define bfin_read_DMA3_CURR_ADDR()           bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val)       bfin_write32(DMA3_CURR_ADDR,val)
+#define bfin_read_DMA3_CURR_X_COUNT()        bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val)    bfin_write16(DMA3_CURR_X_COUNT,val)
+#define bfin_read_DMA3_CURR_Y_COUNT()        bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val)    bfin_write16(DMA3_CURR_Y_COUNT,val)
+#define bfin_read_DMA3_IRQ_STATUS()          bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val)      bfin_write16(DMA3_IRQ_STATUS,val)
+#define bfin_read_DMA3_PERIPHERAL_MAP()      bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val)  bfin_write16(DMA3_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA4_CONFIG()              bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val)          bfin_write16(DMA4_CONFIG,val)
+#define bfin_read_DMA4_NEXT_DESC_PTR()       bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val)   bfin_write32(DMA4_NEXT_DESC_PTR,val)
+#define bfin_read_DMA4_START_ADDR()          bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val)      bfin_write32(DMA4_START_ADDR,val)
+#define bfin_read_DMA4_X_COUNT()             bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val)         bfin_write16(DMA4_X_COUNT,val)
+#define bfin_read_DMA4_Y_COUNT()             bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val)         bfin_write16(DMA4_Y_COUNT,val)
+#define bfin_read_DMA4_X_MODIFY()            bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val)        bfin_write16(DMA4_X_MODIFY,val)
+#define bfin_read_DMA4_Y_MODIFY()            bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val)        bfin_write16(DMA4_Y_MODIFY,val)
+#define bfin_read_DMA4_CURR_DESC_PTR()       bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val)   bfin_write32(DMA4_CURR_DESC_PTR,val)
+#define bfin_read_DMA4_CURR_ADDR()           bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val)       bfin_write32(DMA4_CURR_ADDR,val)
+#define bfin_read_DMA4_CURR_X_COUNT()        bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val)    bfin_write16(DMA4_CURR_X_COUNT,val)
+#define bfin_read_DMA4_CURR_Y_COUNT()        bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val)    bfin_write16(DMA4_CURR_Y_COUNT,val)
+#define bfin_read_DMA4_IRQ_STATUS()          bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val)      bfin_write16(DMA4_IRQ_STATUS,val)
+#define bfin_read_DMA4_PERIPHERAL_MAP()      bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val)  bfin_write16(DMA4_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA5_CONFIG()              bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val)          bfin_write16(DMA5_CONFIG,val)
+#define bfin_read_DMA5_NEXT_DESC_PTR()       bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val)   bfin_write32(DMA5_NEXT_DESC_PTR,val)
+#define bfin_read_DMA5_START_ADDR()          bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val)      bfin_write32(DMA5_START_ADDR,val)
+#define bfin_read_DMA5_X_COUNT()             bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val)         bfin_write16(DMA5_X_COUNT,val)
+#define bfin_read_DMA5_Y_COUNT()             bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val)         bfin_write16(DMA5_Y_COUNT,val)
+#define bfin_read_DMA5_X_MODIFY()            bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val)        bfin_write16(DMA5_X_MODIFY,val)
+#define bfin_read_DMA5_Y_MODIFY()            bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val)        bfin_write16(DMA5_Y_MODIFY,val)
+#define bfin_read_DMA5_CURR_DESC_PTR()       bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val)   bfin_write32(DMA5_CURR_DESC_PTR,val)
+#define bfin_read_DMA5_CURR_ADDR()           bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val)       bfin_write32(DMA5_CURR_ADDR,val)
+#define bfin_read_DMA5_CURR_X_COUNT()        bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val)    bfin_write16(DMA5_CURR_X_COUNT,val)
+#define bfin_read_DMA5_CURR_Y_COUNT()        bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val)    bfin_write16(DMA5_CURR_Y_COUNT,val)
+#define bfin_read_DMA5_IRQ_STATUS()          bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val)      bfin_write16(DMA5_IRQ_STATUS,val)
+#define bfin_read_DMA5_PERIPHERAL_MAP()      bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val)  bfin_write16(DMA5_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA6_CONFIG()              bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val)          bfin_write16(DMA6_CONFIG,val)
+#define bfin_read_DMA6_NEXT_DESC_PTR()       bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val)   bfin_write32(DMA6_NEXT_DESC_PTR,val)
+#define bfin_read_DMA6_START_ADDR()          bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val)      bfin_write32(DMA6_START_ADDR,val)
+#define bfin_read_DMA6_X_COUNT()             bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val)         bfin_write16(DMA6_X_COUNT,val)
+#define bfin_read_DMA6_Y_COUNT()             bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val)         bfin_write16(DMA6_Y_COUNT,val)
+#define bfin_read_DMA6_X_MODIFY()            bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val)        bfin_write16(DMA6_X_MODIFY,val)
+#define bfin_read_DMA6_Y_MODIFY()            bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val)        bfin_write16(DMA6_Y_MODIFY,val)
+#define bfin_read_DMA6_CURR_DESC_PTR()       bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val)   bfin_write32(DMA6_CURR_DESC_PTR,val)
+#define bfin_read_DMA6_CURR_ADDR()           bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val)       bfin_write32(DMA6_CURR_ADDR,val)
+#define bfin_read_DMA6_CURR_X_COUNT()        bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val)    bfin_write16(DMA6_CURR_X_COUNT,val)
+#define bfin_read_DMA6_CURR_Y_COUNT()        bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val)    bfin_write16(DMA6_CURR_Y_COUNT,val)
+#define bfin_read_DMA6_IRQ_STATUS()          bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val)      bfin_write16(DMA6_IRQ_STATUS,val)
+#define bfin_read_DMA6_PERIPHERAL_MAP()      bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val)  bfin_write16(DMA6_PERIPHERAL_MAP,val)
+
+#define bfin_read_DMA7_CONFIG()              bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val)          bfin_write16(DMA7_CONFIG,val)
+#define bfin_read_DMA7_NEXT_DESC_PTR()       bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val)   bfin_write32(DMA7_NEXT_DESC_PTR,val)
+#define bfin_read_DMA7_START_ADDR()          bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val)      bfin_write32(DMA7_START_ADDR,val)
+#define bfin_read_DMA7_X_COUNT()             bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val)         bfin_write16(DMA7_X_COUNT,val)
+#define bfin_read_DMA7_Y_COUNT()             bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val)         bfin_write16(DMA7_Y_COUNT,val)
+#define bfin_read_DMA7_X_MODIFY()            bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val)        bfin_write16(DMA7_X_MODIFY,val)
+#define bfin_read_DMA7_Y_MODIFY()            bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val)        bfin_write16(DMA7_Y_MODIFY,val)
+#define bfin_read_DMA7_CURR_DESC_PTR()       bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val)   bfin_write32(DMA7_CURR_DESC_PTR,val)
+#define bfin_read_DMA7_CURR_ADDR()           bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val)       bfin_write32(DMA7_CURR_ADDR,val)
+#define bfin_read_DMA7_CURR_X_COUNT()        bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val)    bfin_write16(DMA7_CURR_X_COUNT,val)
+#define bfin_read_DMA7_CURR_Y_COUNT()        bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val)    bfin_write16(DMA7_CURR_Y_COUNT,val)
+#define bfin_read_DMA7_IRQ_STATUS()          bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val)      bfin_write16(DMA7_IRQ_STATUS,val)
+#define bfin_read_DMA7_PERIPHERAL_MAP()      bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val)  bfin_write16(DMA7_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D1_CONFIG()           bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val)       bfin_write16(MDMA_D1_CONFIG,val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR()    bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D1_START_ADDR()       bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val)   bfin_write32(MDMA_D1_START_ADDR,val)
+#define bfin_read_MDMA_D1_X_COUNT()          bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val)      bfin_write16(MDMA_D1_X_COUNT,val)
+#define bfin_read_MDMA_D1_Y_COUNT()          bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val)      bfin_write16(MDMA_D1_Y_COUNT,val)
+#define bfin_read_MDMA_D1_X_MODIFY()         bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val)     bfin_write16(MDMA_D1_X_MODIFY,val)
+#define bfin_read_MDMA_D1_Y_MODIFY()         bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val)     bfin_write16(MDMA_D1_Y_MODIFY,val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR()    bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D1_CURR_ADDR()        bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val)    bfin_write32(MDMA_D1_CURR_ADDR,val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT()     bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT()     bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D1_IRQ_STATUS()       bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val)   bfin_write16(MDMA_D1_IRQ_STATUS,val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP()   bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S1_CONFIG()           bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val)       bfin_write16(MDMA_S1_CONFIG,val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR()    bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S1_START_ADDR()       bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val)   bfin_write32(MDMA_S1_START_ADDR,val)
+#define bfin_read_MDMA_S1_X_COUNT()          bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val)      bfin_write16(MDMA_S1_X_COUNT,val)
+#define bfin_read_MDMA_S1_Y_COUNT()          bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val)      bfin_write16(MDMA_S1_Y_COUNT,val)
+#define bfin_read_MDMA_S1_X_MODIFY()         bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val)     bfin_write16(MDMA_S1_X_MODIFY,val)
+#define bfin_read_MDMA_S1_Y_MODIFY()         bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val)     bfin_write16(MDMA_S1_Y_MODIFY,val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR()    bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S1_CURR_ADDR()        bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val)    bfin_write32(MDMA_S1_CURR_ADDR,val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT()     bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT()     bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S1_IRQ_STATUS()       bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val)   bfin_write16(MDMA_S1_IRQ_STATUS,val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP()   bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_D0_CONFIG()           bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val)       bfin_write16(MDMA_D0_CONFIG,val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR()    bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_D0_START_ADDR()       bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val)   bfin_write32(MDMA_D0_START_ADDR,val)
+#define bfin_read_MDMA_D0_X_COUNT()          bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val)      bfin_write16(MDMA_D0_X_COUNT,val)
+#define bfin_read_MDMA_D0_Y_COUNT()          bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val)      bfin_write16(MDMA_D0_Y_COUNT,val)
+#define bfin_read_MDMA_D0_X_MODIFY()         bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val)     bfin_write16(MDMA_D0_X_MODIFY,val)
+#define bfin_read_MDMA_D0_Y_MODIFY()         bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val)     bfin_write16(MDMA_D0_Y_MODIFY,val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR()    bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_D0_CURR_ADDR()        bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val)    bfin_write32(MDMA_D0_CURR_ADDR,val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT()     bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT()     bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_D0_IRQ_STATUS()       bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val)   bfin_write16(MDMA_D0_IRQ_STATUS,val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP()   bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val)
+
+#define bfin_read_MDMA_S0_CONFIG()           bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val)       bfin_write16(MDMA_S0_CONFIG,val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR()    bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val)
+#define bfin_read_MDMA_S0_START_ADDR()       bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val)   bfin_write32(MDMA_S0_START_ADDR,val)
+#define bfin_read_MDMA_S0_X_COUNT()          bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val)      bfin_write16(MDMA_S0_X_COUNT,val)
+#define bfin_read_MDMA_S0_Y_COUNT()          bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val)      bfin_write16(MDMA_S0_Y_COUNT,val)
+#define bfin_read_MDMA_S0_X_MODIFY()         bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val)     bfin_write16(MDMA_S0_X_MODIFY,val)
+#define bfin_read_MDMA_S0_Y_MODIFY()         bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val)     bfin_write16(MDMA_S0_Y_MODIFY,val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR()    bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val)
+#define bfin_read_MDMA_S0_CURR_ADDR()        bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val)    bfin_write32(MDMA_S0_CURR_ADDR,val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT()     bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT()     bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val)
+#define bfin_read_MDMA_S0_IRQ_STATUS()       bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val)   bfin_write16(MDMA_S0_IRQ_STATUS,val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP()   bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val)
+
+/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */
+#define bfin_read_EBIU_AMGCTL()              bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val)          bfin_write16(EBIU_AMGCTL,val)
+#define bfin_read_EBIU_AMBCTL0()             bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val)         bfin_write32(EBIU_AMBCTL0,val)
+#define bfin_read_EBIU_AMBCTL1()             bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val)         bfin_write32(EBIU_AMBCTL1,val)
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */
+#define bfin_read_EBIU_SDGCTL()              bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val)          bfin_write32(EBIU_SDGCTL,val)
+#define bfin_read_EBIU_SDRRC()               bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val)           bfin_write16(EBIU_SDRRC,val)
+#define bfin_read_EBIU_SDSTAT()              bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val)          bfin_write16(EBIU_SDSTAT,val)
+#define bfin_read_EBIU_SDBCTL()              bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val)          bfin_write16(EBIU_SDBCTL,val)
+
+/* UART Controller */
+#define bfin_read_UART_THR()                 bfin_read16(UART_THR)
+#define bfin_write_UART_THR(val)             bfin_write16(UART_THR,val)
+#define bfin_read_UART_RBR()                 bfin_read16(UART_RBR)
+#define bfin_write_UART_RBR(val)             bfin_write16(UART_RBR,val)
+#define bfin_read_UART_DLL()                 bfin_read16(UART_DLL)
+#define bfin_write_UART_DLL(val)             bfin_write16(UART_DLL,val)
+#define bfin_read_UART_IER()                 bfin_read16(UART_IER)
+#define bfin_write_UART_IER(val)             bfin_write16(UART_IER,val)
+#define bfin_read_UART_DLH()                 bfin_read16(UART_DLH)
+#define bfin_write_UART_DLH(val)             bfin_write16(UART_DLH,val)
+#define bfin_read_UART_IIR()                 bfin_read16(UART_IIR)
+#define bfin_write_UART_IIR(val)             bfin_write16(UART_IIR,val)
+#define bfin_read_UART_LCR()                 bfin_read16(UART_LCR)
+#define bfin_write_UART_LCR(val)             bfin_write16(UART_LCR,val)
+#define bfin_read_UART_MCR()                 bfin_read16(UART_MCR)
+#define bfin_write_UART_MCR(val)             bfin_write16(UART_MCR,val)
+#define bfin_read_UART_LSR()                 bfin_read16(UART_LSR)
+#define bfin_write_UART_LSR(val)             bfin_write16(UART_LSR,val)
+/*
+#define UART_MSR
+*/
+#define bfin_read_UART_SCR()                 bfin_read16(UART_SCR)
+#define bfin_write_UART_SCR(val)             bfin_write16(UART_SCR,val)
+#define bfin_read_UART_GCTL()                bfin_read16(UART_GCTL)
+#define bfin_write_UART_GCTL(val)            bfin_write16(UART_GCTL,val)
+
+/* SPI Controller */
+#define bfin_read_SPI_CTL()                  bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val)              bfin_write16(SPI_CTL,val)
+#define bfin_read_SPI_FLG()                  bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val)              bfin_write16(SPI_FLG,val)
+#define bfin_read_SPI_STAT()                 bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val)             bfin_write16(SPI_STAT,val)
+#define bfin_read_SPI_TDBR()                 bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val)             bfin_write16(SPI_TDBR,val)
+#define bfin_read_SPI_RDBR()                 bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val)             bfin_write16(SPI_RDBR,val)
+#define bfin_read_SPI_BAUD()                 bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val)             bfin_write16(SPI_BAUD,val)
+#define bfin_read_SPI_SHADOW()               bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val)           bfin_write16(SPI_SHADOW,val)
+
+/* TIMER 0, 1, 2 Registers */
+#define bfin_read_TIMER0_CONFIG()            bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val)        bfin_write16(TIMER0_CONFIG,val)
+#define bfin_read_TIMER0_COUNTER()           bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val)       bfin_write32(TIMER0_COUNTER,val)
+#define bfin_read_TIMER0_PERIOD()            bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val)        bfin_write32(TIMER0_PERIOD,val)
+#define bfin_read_TIMER0_WIDTH()             bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val)         bfin_write32(TIMER0_WIDTH,val)
+
+#define bfin_read_TIMER1_CONFIG()            bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val)        bfin_write16(TIMER1_CONFIG,val)
+#define bfin_read_TIMER1_COUNTER()           bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val)       bfin_write32(TIMER1_COUNTER,val)
+#define bfin_read_TIMER1_PERIOD()            bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val)        bfin_write32(TIMER1_PERIOD,val)
+#define bfin_read_TIMER1_WIDTH()             bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val)         bfin_write32(TIMER1_WIDTH,val)
+
+#define bfin_read_TIMER2_CONFIG()            bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val)        bfin_write16(TIMER2_CONFIG,val)
+#define bfin_read_TIMER2_COUNTER()           bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val)       bfin_write32(TIMER2_COUNTER,val)
+#define bfin_read_TIMER2_PERIOD()            bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val)        bfin_write32(TIMER2_PERIOD,val)
+#define bfin_read_TIMER2_WIDTH()             bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val)         bfin_write32(TIMER2_WIDTH,val)
+
+#define bfin_read_TIMER_ENABLE()             bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val)         bfin_write16(TIMER_ENABLE,val)
+#define bfin_read_TIMER_DISABLE()            bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val)        bfin_write16(TIMER_DISABLE,val)
+#define bfin_read_TIMER_STATUS()             bfin_read16(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val)         bfin_write16(TIMER_STATUS,val)
+
+/* SPORT0 Controller */
+#define bfin_read_SPORT0_TCR1()              bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val)          bfin_write16(SPORT0_TCR1,val)
+#define bfin_read_SPORT0_TCR2()              bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val)          bfin_write16(SPORT0_TCR2,val)
+#define bfin_read_SPORT0_TCLKDIV()           bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val)       bfin_write16(SPORT0_TCLKDIV,val)
+#define bfin_read_SPORT0_TFSDIV()            bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val)        bfin_write16(SPORT0_TFSDIV,val)
+#define bfin_read_SPORT0_TX()                bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val)            bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX()                bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val)            bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX32()              bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)          bfin_write32(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX32()              bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)          bfin_write32(SPORT0_RX,val)
+#define bfin_read_SPORT0_TX16()              bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)          bfin_write16(SPORT0_TX,val)
+#define bfin_read_SPORT0_RX16()              bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)          bfin_write16(SPORT0_RX,val)
+#define bfin_read_SPORT0_RCR1()              bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val)          bfin_write16(SPORT0_RCR1,val)
+#define bfin_read_SPORT0_RCR2()              bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val)          bfin_write16(SPORT0_RCR2,val)
+#define bfin_read_SPORT0_RCLKDIV()           bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val)       bfin_write16(SPORT0_RCLKDIV,val)
+#define bfin_read_SPORT0_RFSDIV()            bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val)        bfin_write16(SPORT0_RFSDIV,val)
+#define bfin_read_SPORT0_STAT()              bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val)          bfin_write16(SPORT0_STAT,val)
+#define bfin_read_SPORT0_CHNL()              bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val)          bfin_write16(SPORT0_CHNL,val)
+#define bfin_read_SPORT0_MCMC1()             bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val)         bfin_write16(SPORT0_MCMC1,val)
+#define bfin_read_SPORT0_MCMC2()             bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val)         bfin_write16(SPORT0_MCMC2,val)
+#define bfin_read_SPORT0_MTCS0()             bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val)         bfin_write32(SPORT0_MTCS0,val)
+#define bfin_read_SPORT0_MTCS1()             bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val)         bfin_write32(SPORT0_MTCS1,val)
+#define bfin_read_SPORT0_MTCS2()             bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val)         bfin_write32(SPORT0_MTCS2,val)
+#define bfin_read_SPORT0_MTCS3()             bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val)         bfin_write32(SPORT0_MTCS3,val)
+#define bfin_read_SPORT0_MRCS0()             bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val)         bfin_write32(SPORT0_MRCS0,val)
+#define bfin_read_SPORT0_MRCS1()             bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val)         bfin_write32(SPORT0_MRCS1,val)
+#define bfin_read_SPORT0_MRCS2()             bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val)         bfin_write32(SPORT0_MRCS2,val)
+#define bfin_read_SPORT0_MRCS3()             bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val)         bfin_write32(SPORT0_MRCS3,val)
+
+/* SPORT1 Controller */
+#define bfin_read_SPORT1_TCR1()              bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val)          bfin_write16(SPORT1_TCR1,val)
+#define bfin_read_SPORT1_TCR2()              bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val)          bfin_write16(SPORT1_TCR2,val)
+#define bfin_read_SPORT1_TCLKDIV()           bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val)       bfin_write16(SPORT1_TCLKDIV,val)
+#define bfin_read_SPORT1_TFSDIV()            bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val)        bfin_write16(SPORT1_TFSDIV,val)
+#define bfin_read_SPORT1_TX()                bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val)            bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX()                bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val)            bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX32()              bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)          bfin_write32(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX32()              bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)          bfin_write32(SPORT1_RX,val)
+#define bfin_read_SPORT1_TX16()              bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)          bfin_write16(SPORT1_TX,val)
+#define bfin_read_SPORT1_RX16()              bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)          bfin_write16(SPORT1_RX,val)
+#define bfin_read_SPORT1_RCR1()              bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val)          bfin_write16(SPORT1_RCR1,val)
+#define bfin_read_SPORT1_RCR2()              bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val)          bfin_write16(SPORT1_RCR2,val)
+#define bfin_read_SPORT1_RCLKDIV()           bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val)       bfin_write16(SPORT1_RCLKDIV,val)
+#define bfin_read_SPORT1_RFSDIV()            bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val)        bfin_write16(SPORT1_RFSDIV,val)
+#define bfin_read_SPORT1_STAT()              bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val)          bfin_write16(SPORT1_STAT,val)
+#define bfin_read_SPORT1_CHNL()              bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val)          bfin_write16(SPORT1_CHNL,val)
+#define bfin_read_SPORT1_MCMC1()             bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val)         bfin_write16(SPORT1_MCMC1,val)
+#define bfin_read_SPORT1_MCMC2()             bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val)         bfin_write16(SPORT1_MCMC2,val)
+#define bfin_read_SPORT1_MTCS0()             bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val)         bfin_write32(SPORT1_MTCS0,val)
+#define bfin_read_SPORT1_MTCS1()             bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val)         bfin_write32(SPORT1_MTCS1,val)
+#define bfin_read_SPORT1_MTCS2()             bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val)         bfin_write32(SPORT1_MTCS2,val)
+#define bfin_read_SPORT1_MTCS3()             bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val)         bfin_write32(SPORT1_MTCS3,val)
+#define bfin_read_SPORT1_MRCS0()             bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val)         bfin_write32(SPORT1_MRCS0,val)
+#define bfin_read_SPORT1_MRCS1()             bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val)         bfin_write32(SPORT1_MRCS1,val)
+#define bfin_read_SPORT1_MRCS2()             bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val)         bfin_write32(SPORT1_MRCS2,val)
+#define bfin_read_SPORT1_MRCS3()             bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val)         bfin_write32(SPORT1_MRCS3,val)
+
+/* Parallel Peripheral Interface (PPI) */
+#define bfin_read_PPI_CONTROL()              bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val)          bfin_write16(PPI_CONTROL,val)
+#define bfin_read_PPI_STATUS()               bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val)           bfin_write16(PPI_STATUS,val)
+#define bfin_clear_PPI_STATUS()              bfin_read_PPI_STATUS()
+#define bfin_read_PPI_DELAY()                bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val)            bfin_write16(PPI_DELAY,val)
+#define bfin_read_PPI_COUNT()                bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val)            bfin_write16(PPI_COUNT,val)
+#define bfin_read_PPI_FRAME()                bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val)            bfin_write16(PPI_FRAME,val)
+
+#endif				/* _CDEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
new file mode 100644
index 00000000..2376d539
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -0,0 +1,831 @@
+/*
+ * System & MMR bit and Address definitions for ADSP-BF532
+ *
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#ifndef _DEF_BF532_H
+#define _DEF_BF532_H
+
+/*********************************************************************************** */
+/* System MMR Register Map */
+/*********************************************************************************** */
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+
+#define PLL_CTL                0xFFC00000	/* PLL Control register (16-bit) */
+#define PLL_DIV			 0xFFC00004	/* PLL Divide Register (16-bit) */
+#define VR_CTL			 0xFFC00008	/* Voltage Regulator Control Register (16-bit) */
+#define PLL_STAT               0xFFC0000C	/* PLL Status register (16-bit) */
+#define PLL_LOCKCNT            0xFFC00010	/* PLL Lock Count register (16-bit) */
+#define CHIPID                 0xFFC00014       /* Chip ID Register */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define SWRST			0xFFC00100  /* Software Reset Register (16-bit) */
+#define SYSCR			0xFFC00104  /* System Configuration registe */
+#define SIC_RVECT             		0xFFC00108	/* Interrupt Reset Vector Address Register */
+#define SIC_IMASK             		0xFFC0010C	/* Interrupt Mask Register */
+#define SIC_IAR0               		0xFFC00110	/* Interrupt Assignment Register 0 */
+#define SIC_IAR1               		0xFFC00114	/* Interrupt Assignment Register 1 */
+#define SIC_IAR2              		0xFFC00118	/* Interrupt Assignment Register 2 */
+#define SIC_ISR                		0xFFC00120	/* Interrupt Status Register */
+#define SIC_IWR                		0xFFC00124	/* Interrupt Wakeup Register */
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define WDOG_CTL                	0xFFC00200	/* Watchdog Control Register */
+#define WDOG_CNT                	0xFFC00204	/* Watchdog Count Register */
+#define WDOG_STAT               	0xFFC00208	/* Watchdog Status Register */
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define RTC_STAT                	0xFFC00300	/* RTC Status Register */
+#define RTC_ICTL                	0xFFC00304	/* RTC Interrupt Control Register */
+#define RTC_ISTAT               	0xFFC00308	/* RTC Interrupt Status Register */
+#define RTC_SWCNT               	0xFFC0030C	/* RTC Stopwatch Count Register */
+#define RTC_ALARM               	0xFFC00310	/* RTC Alarm Time Register */
+#define RTC_FAST                	0xFFC00314	/* RTC Prescaler Enable Register */
+#define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */
+
+/* UART Controller (0xFFC00400 - 0xFFC004FF) */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART_*.
+ */
+#define BFIN_UART_THR			0xFFC00400	/* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400	/* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400	/* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404	/* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404	/* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408	/* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C	/* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410	/* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414	/* Line Status Register */
+#if 0
+#define BFIN_UART_MSR			0xFFC00418	/* Modem Status Register (UNUSED in ADSP-BF532) */
+#endif
+#define BFIN_UART_SCR			0xFFC0041C	/* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424	/* Global Control Register */
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE          		0xFFC00500
+#define SPI_CTL               		0xFFC00500	/* SPI Control Register */
+#define SPI_FLG               		0xFFC00504	/* SPI Flag register */
+#define SPI_STAT              		0xFFC00508	/* SPI Status register */
+#define SPI_TDBR              		0xFFC0050C	/* SPI Transmit Data Buffer Register */
+#define SPI_RDBR              		0xFFC00510	/* SPI Receive Data Buffer Register */
+#define SPI_BAUD              		0xFFC00514	/* SPI Baud rate Register */
+#define SPI_SHADOW            		0xFFC00518	/* SPI_RDBR Shadow Register */
+
+/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */
+
+#define TIMER0_CONFIG          		0xFFC00600	/* Timer 0 Configuration Register */
+#define TIMER0_COUNTER			0xFFC00604	/* Timer 0 Counter Register */
+#define TIMER0_PERIOD       		0xFFC00608	/* Timer 0 Period Register */
+#define TIMER0_WIDTH        		0xFFC0060C	/* Timer 0 Width Register */
+
+#define TIMER1_CONFIG          		0xFFC00610	/*  Timer 1 Configuration Register   */
+#define TIMER1_COUNTER         		0xFFC00614	/*  Timer 1 Counter Register         */
+#define TIMER1_PERIOD          		0xFFC00618	/*  Timer 1 Period Register          */
+#define TIMER1_WIDTH           		0xFFC0061C	/*  Timer 1 Width Register           */
+
+#define TIMER2_CONFIG          		0xFFC00620	/* Timer 2 Configuration Register   */
+#define TIMER2_COUNTER         		0xFFC00624	/* Timer 2 Counter Register         */
+#define TIMER2_PERIOD          		0xFFC00628	/* Timer 2 Period Register          */
+#define TIMER2_WIDTH           		0xFFC0062C	/* Timer 2 Width Register           */
+
+#define TIMER_ENABLE			0xFFC00640	/* Timer Enable Register */
+#define TIMER_DISABLE			0xFFC00644	/* Timer Disable Register */
+#define TIMER_STATUS			0xFFC00648	/* Timer Status Register */
+
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */
+
+#define FIO_FLAG_D	       		0xFFC00700	/* Flag Mask to directly specify state of pins */
+#define FIO_FLAG_C             		0xFFC00704	/* Peripheral Interrupt Flag Register (clear) */
+#define FIO_FLAG_S             		0xFFC00708	/* Peripheral Interrupt Flag Register (set) */
+#define FIO_FLAG_T			0xFFC0070C	/* Flag Mask to directly toggle state of pins */
+#define FIO_MASKA_D            		0xFFC00710	/* Flag Mask Interrupt A Register (set directly) */
+#define FIO_MASKA_C            		0xFFC00714	/* Flag Mask Interrupt A Register (clear) */
+#define FIO_MASKA_S            		0xFFC00718	/* Flag Mask Interrupt A Register (set) */
+#define FIO_MASKA_T            		0xFFC0071C	/* Flag Mask Interrupt A Register (toggle) */
+#define FIO_MASKB_D            		0xFFC00720	/* Flag Mask Interrupt B Register (set directly) */
+#define FIO_MASKB_C            		0xFFC00724	/* Flag Mask Interrupt B Register (clear) */
+#define FIO_MASKB_S            		0xFFC00728	/* Flag Mask Interrupt B Register (set) */
+#define FIO_MASKB_T            		0xFFC0072C	/* Flag Mask Interrupt B Register (toggle) */
+#define FIO_DIR                		0xFFC00730	/* Peripheral Flag Direction Register */
+#define FIO_POLAR              		0xFFC00734	/* Flag Source Polarity Register */
+#define FIO_EDGE               		0xFFC00738	/* Flag Source Sensitivity Register */
+#define FIO_BOTH               		0xFFC0073C	/* Flag Set on BOTH Edges Register */
+#define FIO_INEN					0xFFC00740	/* Flag Input Enable Register  */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1     	 	0xFFC00800	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2      	 	0xFFC00804	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV        		0xFFC00808	/* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV          		0xFFC0080C	/* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX	             	0xFFC00810	/* SPORT0 TX Data Register */
+#define SPORT0_RX	            	0xFFC00818	/* SPORT0 RX Data Register */
+#define SPORT0_RCR1      	 	0xFFC00820	/* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2      	 	0xFFC00824	/* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV        		0xFFC00828	/* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV          		0xFFC0082C	/* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT            		0xFFC00830	/* SPORT0 Status Register */
+#define SPORT0_CHNL            		0xFFC00834	/* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1           		0xFFC00838	/* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2           		0xFFC0083C	/* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0           		0xFFC00840	/* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1           		0xFFC00844	/* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2           		0xFFC00848	/* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3           		0xFFC0084C	/* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0           		0xFFC00850	/* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1           		0xFFC00854	/* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2           		0xFFC00858	/* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3           		0xFFC0085C	/* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1     	 	0xFFC00900	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2      	 	0xFFC00904	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV        		0xFFC00908	/* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV          		0xFFC0090C	/* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX	             	0xFFC00910	/* SPORT1 TX Data Register */
+#define SPORT1_RX	            	0xFFC00918	/* SPORT1 RX Data Register */
+#define SPORT1_RCR1      	 	0xFFC00920	/* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2      	 	0xFFC00924	/* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV        		0xFFC00928	/* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV          		0xFFC0092C	/* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT            		0xFFC00930	/* SPORT1 Status Register */
+#define SPORT1_CHNL            		0xFFC00934	/* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1           		0xFFC00938	/* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2           		0xFFC0093C	/* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0           		0xFFC00940	/* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1           		0xFFC00944	/* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2           		0xFFC00948	/* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3           		0xFFC0094C	/* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0           		0xFFC00950	/* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1           		0xFFC00954	/* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2           		0xFFC00958	/* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3           		0xFFC0095C	/* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* Asynchronous Memory Controller - External Bus Interface Unit  */
+#define EBIU_AMGCTL			0xFFC00A00	/* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0			0xFFC00A04	/* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1			0xFFC00A08	/* Asynchronous Memory Bank Control Register 1 */
+
+/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+
+#define EBIU_SDGCTL			0xFFC00A10	/* SDRAM Global Control Register */
+#define EBIU_SDBCTL			0xFFC00A14	/* SDRAM Bank Control Register */
+#define EBIU_SDRRC 			0xFFC00A18	/* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT			0xFFC00A1C	/* SDRAM Status Register */
+
+/* DMA Traffic controls */
+#define DMAC_TC_PER 0xFFC00B0C	/* Traffic Control Periods Register */
+#define DMAC_TC_CNT 0xFFC00B10	/* Traffic Control Current Counts Register */
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
+#define DMA0_CONFIG		0xFFC00C08	/* DMA Channel 0 Configuration Register */
+#define DMA0_NEXT_DESC_PTR	0xFFC00C00	/* DMA Channel 0 Next Descriptor Pointer Register */
+#define DMA0_START_ADDR		0xFFC00C04	/* DMA Channel 0 Start Address Register */
+#define DMA0_X_COUNT		0xFFC00C10	/* DMA Channel 0 X Count Register */
+#define DMA0_Y_COUNT		0xFFC00C18	/* DMA Channel 0 Y Count Register */
+#define DMA0_X_MODIFY		0xFFC00C14	/* DMA Channel 0 X Modify Register */
+#define DMA0_Y_MODIFY		0xFFC00C1C	/* DMA Channel 0 Y Modify Register */
+#define DMA0_CURR_DESC_PTR	0xFFC00C20	/* DMA Channel 0 Current Descriptor Pointer Register */
+#define DMA0_CURR_ADDR		0xFFC00C24	/* DMA Channel 0 Current Address Register */
+#define DMA0_CURR_X_COUNT	0xFFC00C30	/* DMA Channel 0 Current X Count Register */
+#define DMA0_CURR_Y_COUNT	0xFFC00C38	/* DMA Channel 0 Current Y Count Register */
+#define DMA0_IRQ_STATUS		0xFFC00C28	/* DMA Channel 0 Interrupt/Status Register */
+#define DMA0_PERIPHERAL_MAP	0xFFC00C2C	/* DMA Channel 0 Peripheral Map Register */
+
+#define DMA1_CONFIG		0xFFC00C48	/* DMA Channel 1 Configuration Register */
+#define DMA1_NEXT_DESC_PTR	0xFFC00C40	/* DMA Channel 1 Next Descriptor Pointer Register */
+#define DMA1_START_ADDR		0xFFC00C44	/* DMA Channel 1 Start Address Register */
+#define DMA1_X_COUNT		0xFFC00C50	/* DMA Channel 1 X Count Register */
+#define DMA1_Y_COUNT		0xFFC00C58	/* DMA Channel 1 Y Count Register */
+#define DMA1_X_MODIFY		0xFFC00C54	/* DMA Channel 1 X Modify Register */
+#define DMA1_Y_MODIFY		0xFFC00C5C	/* DMA Channel 1 Y Modify Register */
+#define DMA1_CURR_DESC_PTR	0xFFC00C60	/* DMA Channel 1 Current Descriptor Pointer Register */
+#define DMA1_CURR_ADDR		0xFFC00C64	/* DMA Channel 1 Current Address Register */
+#define DMA1_CURR_X_COUNT	0xFFC00C70	/* DMA Channel 1 Current X Count Register */
+#define DMA1_CURR_Y_COUNT	0xFFC00C78	/* DMA Channel 1 Current Y Count Register */
+#define DMA1_IRQ_STATUS		0xFFC00C68	/* DMA Channel 1 Interrupt/Status Register */
+#define DMA1_PERIPHERAL_MAP	0xFFC00C6C	/* DMA Channel 1 Peripheral Map Register */
+
+#define DMA2_CONFIG		0xFFC00C88	/* DMA Channel 2 Configuration Register */
+#define DMA2_NEXT_DESC_PTR	0xFFC00C80	/* DMA Channel 2 Next Descriptor Pointer Register */
+#define DMA2_START_ADDR		0xFFC00C84	/* DMA Channel 2 Start Address Register */
+#define DMA2_X_COUNT		0xFFC00C90	/* DMA Channel 2 X Count Register */
+#define DMA2_Y_COUNT		0xFFC00C98	/* DMA Channel 2 Y Count Register */
+#define DMA2_X_MODIFY		0xFFC00C94	/* DMA Channel 2 X Modify Register */
+#define DMA2_Y_MODIFY		0xFFC00C9C	/* DMA Channel 2 Y Modify Register */
+#define DMA2_CURR_DESC_PTR	0xFFC00CA0	/* DMA Channel 2 Current Descriptor Pointer Register */
+#define DMA2_CURR_ADDR		0xFFC00CA4	/* DMA Channel 2 Current Address Register */
+#define DMA2_CURR_X_COUNT	0xFFC00CB0	/* DMA Channel 2 Current X Count Register */
+#define DMA2_CURR_Y_COUNT	0xFFC00CB8	/* DMA Channel 2 Current Y Count Register */
+#define DMA2_IRQ_STATUS		0xFFC00CA8	/* DMA Channel 2 Interrupt/Status Register */
+#define DMA2_PERIPHERAL_MAP	0xFFC00CAC	/* DMA Channel 2 Peripheral Map Register */
+
+#define DMA3_CONFIG		0xFFC00CC8	/* DMA Channel 3 Configuration Register */
+#define DMA3_NEXT_DESC_PTR	0xFFC00CC0	/* DMA Channel 3 Next Descriptor Pointer Register */
+#define DMA3_START_ADDR		0xFFC00CC4	/* DMA Channel 3 Start Address Register */
+#define DMA3_X_COUNT		0xFFC00CD0	/* DMA Channel 3 X Count Register */
+#define DMA3_Y_COUNT		0xFFC00CD8	/* DMA Channel 3 Y Count Register */
+#define DMA3_X_MODIFY		0xFFC00CD4	/* DMA Channel 3 X Modify Register */
+#define DMA3_Y_MODIFY		0xFFC00CDC	/* DMA Channel 3 Y Modify Register */
+#define DMA3_CURR_DESC_PTR	0xFFC00CE0	/* DMA Channel 3 Current Descriptor Pointer Register */
+#define DMA3_CURR_ADDR		0xFFC00CE4	/* DMA Channel 3 Current Address Register */
+#define DMA3_CURR_X_COUNT	0xFFC00CF0	/* DMA Channel 3 Current X Count Register */
+#define DMA3_CURR_Y_COUNT	0xFFC00CF8	/* DMA Channel 3 Current Y Count Register */
+#define DMA3_IRQ_STATUS		0xFFC00CE8	/* DMA Channel 3 Interrupt/Status Register */
+#define DMA3_PERIPHERAL_MAP	0xFFC00CEC	/* DMA Channel 3 Peripheral Map Register */
+
+#define DMA4_CONFIG		0xFFC00D08	/* DMA Channel 4 Configuration Register */
+#define DMA4_NEXT_DESC_PTR	0xFFC00D00	/* DMA Channel 4 Next Descriptor Pointer Register */
+#define DMA4_START_ADDR		0xFFC00D04	/* DMA Channel 4 Start Address Register */
+#define DMA4_X_COUNT		0xFFC00D10	/* DMA Channel 4 X Count Register */
+#define DMA4_Y_COUNT		0xFFC00D18	/* DMA Channel 4 Y Count Register */
+#define DMA4_X_MODIFY		0xFFC00D14	/* DMA Channel 4 X Modify Register */
+#define DMA4_Y_MODIFY		0xFFC00D1C	/* DMA Channel 4 Y Modify Register */
+#define DMA4_CURR_DESC_PTR	0xFFC00D20	/* DMA Channel 4 Current Descriptor Pointer Register */
+#define DMA4_CURR_ADDR		0xFFC00D24	/* DMA Channel 4 Current Address Register */
+#define DMA4_CURR_X_COUNT	0xFFC00D30	/* DMA Channel 4 Current X Count Register */
+#define DMA4_CURR_Y_COUNT	0xFFC00D38	/* DMA Channel 4 Current Y Count Register */
+#define DMA4_IRQ_STATUS		0xFFC00D28	/* DMA Channel 4 Interrupt/Status Register */
+#define DMA4_PERIPHERAL_MAP	0xFFC00D2C	/* DMA Channel 4 Peripheral Map Register */
+
+#define DMA5_CONFIG		0xFFC00D48	/* DMA Channel 5 Configuration Register */
+#define DMA5_NEXT_DESC_PTR	0xFFC00D40	/* DMA Channel 5 Next Descriptor Pointer Register */
+#define DMA5_START_ADDR		0xFFC00D44	/* DMA Channel 5 Start Address Register */
+#define DMA5_X_COUNT		0xFFC00D50	/* DMA Channel 5 X Count Register */
+#define DMA5_Y_COUNT		0xFFC00D58	/* DMA Channel 5 Y Count Register */
+#define DMA5_X_MODIFY		0xFFC00D54	/* DMA Channel 5 X Modify Register */
+#define DMA5_Y_MODIFY		0xFFC00D5C	/* DMA Channel 5 Y Modify Register */
+#define DMA5_CURR_DESC_PTR	0xFFC00D60	/* DMA Channel 5 Current Descriptor Pointer Register */
+#define DMA5_CURR_ADDR		0xFFC00D64	/* DMA Channel 5 Current Address Register */
+#define DMA5_CURR_X_COUNT	0xFFC00D70	/* DMA Channel 5 Current X Count Register */
+#define DMA5_CURR_Y_COUNT	0xFFC00D78	/* DMA Channel 5 Current Y Count Register */
+#define DMA5_IRQ_STATUS		0xFFC00D68	/* DMA Channel 5 Interrupt/Status Register */
+#define DMA5_PERIPHERAL_MAP	0xFFC00D6C	/* DMA Channel 5 Peripheral Map Register */
+
+#define DMA6_CONFIG		0xFFC00D88	/* DMA Channel 6 Configuration Register */
+#define DMA6_NEXT_DESC_PTR	0xFFC00D80	/* DMA Channel 6 Next Descriptor Pointer Register */
+#define DMA6_START_ADDR		0xFFC00D84	/* DMA Channel 6 Start Address Register */
+#define DMA6_X_COUNT		0xFFC00D90	/* DMA Channel 6 X Count Register */
+#define DMA6_Y_COUNT		0xFFC00D98	/* DMA Channel 6 Y Count Register */
+#define DMA6_X_MODIFY		0xFFC00D94	/* DMA Channel 6 X Modify Register */
+#define DMA6_Y_MODIFY		0xFFC00D9C	/* DMA Channel 6 Y Modify Register */
+#define DMA6_CURR_DESC_PTR	0xFFC00DA0	/* DMA Channel 6 Current Descriptor Pointer Register */
+#define DMA6_CURR_ADDR		0xFFC00DA4	/* DMA Channel 6 Current Address Register */
+#define DMA6_CURR_X_COUNT	0xFFC00DB0	/* DMA Channel 6 Current X Count Register */
+#define DMA6_CURR_Y_COUNT	0xFFC00DB8	/* DMA Channel 6 Current Y Count Register */
+#define DMA6_IRQ_STATUS		0xFFC00DA8	/* DMA Channel 6 Interrupt/Status Register */
+#define DMA6_PERIPHERAL_MAP	0xFFC00DAC	/* DMA Channel 6 Peripheral Map Register */
+
+#define DMA7_CONFIG		0xFFC00DC8	/* DMA Channel 7 Configuration Register */
+#define DMA7_NEXT_DESC_PTR	0xFFC00DC0	/* DMA Channel 7 Next Descriptor Pointer Register */
+#define DMA7_START_ADDR		0xFFC00DC4	/* DMA Channel 7 Start Address Register */
+#define DMA7_X_COUNT		0xFFC00DD0	/* DMA Channel 7 X Count Register */
+#define DMA7_Y_COUNT		0xFFC00DD8	/* DMA Channel 7 Y Count Register */
+#define DMA7_X_MODIFY		0xFFC00DD4	/* DMA Channel 7 X Modify Register */
+#define DMA7_Y_MODIFY		0xFFC00DDC	/* DMA Channel 7 Y Modify Register */
+#define DMA7_CURR_DESC_PTR	0xFFC00DE0	/* DMA Channel 7 Current Descriptor Pointer Register */
+#define DMA7_CURR_ADDR		0xFFC00DE4	/* DMA Channel 7 Current Address Register */
+#define DMA7_CURR_X_COUNT	0xFFC00DF0	/* DMA Channel 7 Current X Count Register */
+#define DMA7_CURR_Y_COUNT	0xFFC00DF8	/* DMA Channel 7 Current Y Count Register */
+#define DMA7_IRQ_STATUS		0xFFC00DE8	/* DMA Channel 7 Interrupt/Status Register */
+#define DMA7_PERIPHERAL_MAP	0xFFC00DEC	/* DMA Channel 7 Peripheral Map Register */
+
+#define MDMA_D1_CONFIG		0xFFC00E88	/* MemDMA Stream 1 Destination Configuration Register */
+#define MDMA_D1_NEXT_DESC_PTR	0xFFC00E80	/* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
+#define MDMA_D1_START_ADDR	0xFFC00E84	/* MemDMA Stream 1 Destination Start Address Register */
+#define MDMA_D1_X_COUNT		0xFFC00E90	/* MemDMA Stream 1 Destination X Count Register */
+#define MDMA_D1_Y_COUNT		0xFFC00E98	/* MemDMA Stream 1 Destination Y Count Register */
+#define MDMA_D1_X_MODIFY	0xFFC00E94	/* MemDMA Stream 1 Destination X Modify Register */
+#define MDMA_D1_Y_MODIFY	0xFFC00E9C	/* MemDMA Stream 1 Destination Y Modify Register */
+#define MDMA_D1_CURR_DESC_PTR	0xFFC00EA0	/* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
+#define MDMA_D1_CURR_ADDR	0xFFC00EA4	/* MemDMA Stream 1 Destination Current Address Register */
+#define MDMA_D1_CURR_X_COUNT	0xFFC00EB0	/* MemDMA Stream 1 Destination Current X Count Register */
+#define MDMA_D1_CURR_Y_COUNT	0xFFC00EB8	/* MemDMA Stream 1 Destination Current Y Count Register */
+#define MDMA_D1_IRQ_STATUS	0xFFC00EA8	/* MemDMA Stream 1 Destination Interrupt/Status Register */
+#define MDMA_D1_PERIPHERAL_MAP	0xFFC00EAC	/* MemDMA Stream 1 Destination Peripheral Map Register */
+
+#define MDMA_S1_CONFIG		0xFFC00EC8	/* MemDMA Stream 1 Source Configuration Register */
+#define MDMA_S1_NEXT_DESC_PTR	0xFFC00EC0	/* MemDMA Stream 1 Source Next Descriptor Pointer Register */
+#define MDMA_S1_START_ADDR	0xFFC00EC4	/* MemDMA Stream 1 Source Start Address Register */
+#define MDMA_S1_X_COUNT		0xFFC00ED0	/* MemDMA Stream 1 Source X Count Register */
+#define MDMA_S1_Y_COUNT		0xFFC00ED8	/* MemDMA Stream 1 Source Y Count Register */
+#define MDMA_S1_X_MODIFY	0xFFC00ED4	/* MemDMA Stream 1 Source X Modify Register */
+#define MDMA_S1_Y_MODIFY	0xFFC00EDC	/* MemDMA Stream 1 Source Y Modify Register */
+#define MDMA_S1_CURR_DESC_PTR	0xFFC00EE0	/* MemDMA Stream 1 Source Current Descriptor Pointer Register */
+#define MDMA_S1_CURR_ADDR	0xFFC00EE4	/* MemDMA Stream 1 Source Current Address Register */
+#define MDMA_S1_CURR_X_COUNT	0xFFC00EF0	/* MemDMA Stream 1 Source Current X Count Register */
+#define MDMA_S1_CURR_Y_COUNT	0xFFC00EF8	/* MemDMA Stream 1 Source Current Y Count Register */
+#define MDMA_S1_IRQ_STATUS	0xFFC00EE8	/* MemDMA Stream 1 Source Interrupt/Status Register */
+#define MDMA_S1_PERIPHERAL_MAP	0xFFC00EEC	/* MemDMA Stream 1 Source Peripheral Map Register */
+
+#define MDMA_D0_CONFIG		0xFFC00E08	/* MemDMA Stream 0 Destination Configuration Register */
+#define MDMA_D0_NEXT_DESC_PTR	0xFFC00E00	/* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
+#define MDMA_D0_START_ADDR	0xFFC00E04	/* MemDMA Stream 0 Destination Start Address Register */
+#define MDMA_D0_X_COUNT		0xFFC00E10	/* MemDMA Stream 0 Destination X Count Register */
+#define MDMA_D0_Y_COUNT		0xFFC00E18	/* MemDMA Stream 0 Destination Y Count Register */
+#define MDMA_D0_X_MODIFY	0xFFC00E14	/* MemDMA Stream 0 Destination X Modify Register */
+#define MDMA_D0_Y_MODIFY	0xFFC00E1C	/* MemDMA Stream 0 Destination Y Modify Register */
+#define MDMA_D0_CURR_DESC_PTR	0xFFC00E20	/* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
+#define MDMA_D0_CURR_ADDR	0xFFC00E24	/* MemDMA Stream 0 Destination Current Address Register */
+#define MDMA_D0_CURR_X_COUNT	0xFFC00E30	/* MemDMA Stream 0 Destination Current X Count Register */
+#define MDMA_D0_CURR_Y_COUNT	0xFFC00E38	/* MemDMA Stream 0 Destination Current Y Count Register */
+#define MDMA_D0_IRQ_STATUS	0xFFC00E28	/* MemDMA Stream 0 Destination Interrupt/Status Register */
+#define MDMA_D0_PERIPHERAL_MAP	0xFFC00E2C	/* MemDMA Stream 0 Destination Peripheral Map Register */
+
+#define MDMA_S0_CONFIG		0xFFC00E48	/* MemDMA Stream 0 Source Configuration Register */
+#define MDMA_S0_NEXT_DESC_PTR	0xFFC00E40	/* MemDMA Stream 0 Source Next Descriptor Pointer Register */
+#define MDMA_S0_START_ADDR	0xFFC00E44	/* MemDMA Stream 0 Source Start Address Register */
+#define MDMA_S0_X_COUNT		0xFFC00E50	/* MemDMA Stream 0 Source X Count Register */
+#define MDMA_S0_Y_COUNT		0xFFC00E58	/* MemDMA Stream 0 Source Y Count Register */
+#define MDMA_S0_X_MODIFY	0xFFC00E54	/* MemDMA Stream 0 Source X Modify Register */
+#define MDMA_S0_Y_MODIFY	0xFFC00E5C	/* MemDMA Stream 0 Source Y Modify Register */
+#define MDMA_S0_CURR_DESC_PTR	0xFFC00E60	/* MemDMA Stream 0 Source Current Descriptor Pointer Register */
+#define MDMA_S0_CURR_ADDR	0xFFC00E64	/* MemDMA Stream 0 Source Current Address Register */
+#define MDMA_S0_CURR_X_COUNT	0xFFC00E70	/* MemDMA Stream 0 Source Current X Count Register */
+#define MDMA_S0_CURR_Y_COUNT	0xFFC00E78	/* MemDMA Stream 0 Source Current Y Count Register */
+#define MDMA_S0_IRQ_STATUS	0xFFC00E68	/* MemDMA Stream 0 Source Interrupt/Status Register */
+#define MDMA_S0_PERIPHERAL_MAP	0xFFC00E6C	/* MemDMA Stream 0 Source Peripheral Map Register */
+
+/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */
+
+#define PPI_CONTROL			0xFFC01000	/* PPI Control Register */
+#define PPI_STATUS			0xFFC01004	/* PPI Status Register */
+#define PPI_COUNT			0xFFC01008	/* PPI Transfer Count Register */
+#define PPI_DELAY			0xFFC0100C	/* PPI Delay Count Register */
+#define PPI_FRAME			0xFFC01010	/* PPI Frame Length Register */
+
+/*********************************************************************************** */
+/* System MMR Register Bits */
+/******************************************************************************* */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION         0xF0000000
+#define CHIPID_FAMILY          0x0FFFF000
+#define CHIPID_MANUFACTURE     0x00000FFE
+
+/* SWRST Mask */
+#define SYSTEM_RESET	0x0007	/* Initiates A System Software Reset			*/
+#define	DOUBLE_FAULT	0x0008	/* Core Double Fault Causes Reset				*/
+#define RESET_DOUBLE	0x2000	/* SW Reset Generated By Core Double-Fault		*/
+#define RESET_WDOG	0x4000	/* SW Reset Generated By Watchdog Timer			*/
+#define RESET_SOFTWARE	0x8000	/* SW Reset Occurred Since Last Read Of SWRST	*/
+
+/* SYSCR Masks																				*/
+#define BMODE			0x0006	/* Boot Mode - Latched During HW Reset From Mode Pins	*/
+#define	NOBOOT			0x0010	/* Execute From L1 or ASYNC Bank 0 When BMODE = 0		*/
+
+/* *************  SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
+
+    /* SIC_IAR0 Masks */
+
+#define P0_IVG(x)    ((x)-7)	/* Peripheral #0 assigned IVG #x  */
+#define P1_IVG(x)    ((x)-7) << 0x4	/* Peripheral #1 assigned IVG #x  */
+#define P2_IVG(x)    ((x)-7) << 0x8	/* Peripheral #2 assigned IVG #x  */
+#define P3_IVG(x)    ((x)-7) << 0xC	/* Peripheral #3 assigned IVG #x  */
+#define P4_IVG(x)    ((x)-7) << 0x10	/* Peripheral #4 assigned IVG #x  */
+#define P5_IVG(x)    ((x)-7) << 0x14	/* Peripheral #5 assigned IVG #x  */
+#define P6_IVG(x)    ((x)-7) << 0x18	/* Peripheral #6 assigned IVG #x  */
+#define P7_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #7 assigned IVG #x  */
+
+/* SIC_IAR1 Masks */
+
+#define P8_IVG(x)     ((x)-7)	/* Peripheral #8 assigned IVG #x  */
+#define P9_IVG(x)     ((x)-7) << 0x4	/* Peripheral #9 assigned IVG #x  */
+#define P10_IVG(x)    ((x)-7) << 0x8	/* Peripheral #10 assigned IVG #x  */
+#define P11_IVG(x)    ((x)-7) << 0xC	/* Peripheral #11 assigned IVG #x  */
+#define P12_IVG(x)    ((x)-7) << 0x10	/* Peripheral #12 assigned IVG #x  */
+#define P13_IVG(x)    ((x)-7) << 0x14	/* Peripheral #13 assigned IVG #x  */
+#define P14_IVG(x)    ((x)-7) << 0x18	/* Peripheral #14 assigned IVG #x  */
+#define P15_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #15 assigned IVG #x  */
+
+/* SIC_IAR2 Masks */
+#define P16_IVG(x)    ((x)-7)	/* Peripheral #16 assigned IVG #x  */
+#define P17_IVG(x)    ((x)-7) << 0x4	/* Peripheral #17 assigned IVG #x  */
+#define P18_IVG(x)    ((x)-7) << 0x8	/* Peripheral #18 assigned IVG #x  */
+#define P19_IVG(x)    ((x)-7) << 0xC	/* Peripheral #19 assigned IVG #x  */
+#define P20_IVG(x)    ((x)-7) << 0x10	/* Peripheral #20 assigned IVG #x  */
+#define P21_IVG(x)    ((x)-7) << 0x14	/* Peripheral #21 assigned IVG #x  */
+#define P22_IVG(x)    ((x)-7) << 0x18	/* Peripheral #22 assigned IVG #x  */
+#define P23_IVG(x)    ((x)-7) << 0x1C	/* Peripheral #23 assigned IVG #x  */
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
+/*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
+
+/*  PPI_CONTROL Masks         */
+#define PORT_EN              0x00000001	/* PPI Port Enable  */
+#define PORT_DIR             0x00000002	/* PPI Port Direction       */
+#define XFR_TYPE             0x0000000C	/* PPI Transfer Type  */
+#define PORT_CFG             0x00000030	/* PPI Port Configuration */
+#define FLD_SEL              0x00000040	/* PPI Active Field Select */
+#define PACK_EN              0x00000080	/* PPI Packing Mode */
+#define DMA32                0x00000100	/* PPI 32-bit DMA Enable */
+#define SKIP_EN              0x00000200	/* PPI Skip Element Enable */
+#define SKIP_EO              0x00000400	/* PPI Skip Even/Odd Elements */
+#define DLENGTH              0x00003800	/* PPI Data Length  */
+#define DLEN_8			0x0000	/* Data Length = 8 Bits                         */
+#define DLEN_10			0x0800	/* Data Length = 10 Bits                        */
+#define DLEN_11			0x1000	/* Data Length = 11 Bits                        */
+#define DLEN_12			0x1800	/* Data Length = 12 Bits                        */
+#define DLEN_13			0x2000	/* Data Length = 13 Bits                        */
+#define DLEN_14			0x2800	/* Data Length = 14 Bits                        */
+#define DLEN_15			0x3000	/* Data Length = 15 Bits                        */
+#define DLEN_16			0x3800	/* Data Length = 16 Bits                        */
+#define DLEN(x)	(((x-9) & 0x07) << 11)	/* PPI Data Length (only works for x=10-->x=16) */
+#define POL                  0x0000C000	/* PPI Signal Polarities       */
+#define POLC		0x4000		/* PPI Clock Polarity				*/
+#define POLS		0x8000		/* PPI Frame Sync Polarity			*/
+
+/* PPI_STATUS Masks                                          */
+#define FLD	             0x00000400	/* Field Indicator   */
+#define FT_ERR	             0x00000800	/* Frame Track Error */
+#define OVR	             0x00001000	/* FIFO Overflow Error */
+#define UNDR	             0x00002000	/* FIFO Underrun Error */
+#define ERR_DET	      	     0x00004000	/* Error Detected Indicator */
+#define ERR_NCOR	     0x00008000	/* Error Not Corrected Indicator */
+
+/* **********  DMA CONTROLLER MASKS  *********************8 */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+
+#define CTYPE	            0x00000040	/* DMA Channel Type Indicator */
+#define CTYPE_P             6	/* DMA Channel Type Indicator BIT POSITION */
+#define PCAP8	            0x00000080	/* DMA 8-bit Operation Indicator   */
+#define PCAP16	            0x00000100	/* DMA 16-bit Operation Indicator */
+#define PCAP32	            0x00000200	/* DMA 32-bit Operation Indicator */
+#define PCAPWR	            0x00000400	/* DMA Write Operation Indicator */
+#define PCAPRD	            0x00000800	/* DMA Read Operation Indicator */
+#define PMAP	            0x00007000	/* DMA Peripheral Map Field */
+
+#define PMAP_PPI		0x0000	/* PMAP PPI Port DMA */
+#define	PMAP_SPORT0RX		0x1000	/* PMAP SPORT0 Receive DMA */
+#define PMAP_SPORT0TX		0x2000	/* PMAP SPORT0 Transmit DMA */
+#define	PMAP_SPORT1RX		0x3000	/* PMAP SPORT1 Receive DMA */
+#define PMAP_SPORT1TX		0x4000	/* PMAP SPORT1 Transmit DMA */
+#define PMAP_SPI		0x5000	/* PMAP SPI DMA */
+#define PMAP_UARTRX		0x6000	/* PMAP UART Receive DMA */
+#define PMAP_UARTTX		0x7000	/* PMAP UART Transmit DMA */
+
+/*  *************  GENERAL PURPOSE TIMER MASKS  ******************** */
+
+/* PWM Timer bit definitions */
+
+/* TIMER_ENABLE Register */
+#define TIMEN0	0x0001
+#define TIMEN1	0x0002
+#define TIMEN2	0x0004
+
+#define TIMEN0_P	0x00
+#define TIMEN1_P	0x01
+#define TIMEN2_P	0x02
+
+/* TIMER_DISABLE Register */
+#define TIMDIS0	0x0001
+#define TIMDIS1	0x0002
+#define TIMDIS2	0x0004
+
+#define TIMDIS0_P	0x00
+#define TIMDIS1_P	0x01
+#define TIMDIS2_P	0x02
+
+/* TIMER_STATUS Register */
+#define TIMIL0		0x0001
+#define TIMIL1		0x0002
+#define TIMIL2		0x0004
+#define TOVF_ERR0		0x0010	/* Timer 0 Counter Overflow		*/
+#define TOVF_ERR1		0x0020	/* Timer 1 Counter Overflow		*/
+#define TOVF_ERR2		0x0040	/* Timer 2 Counter Overflow		*/
+#define TRUN0		0x1000
+#define TRUN1		0x2000
+#define TRUN2		0x4000
+
+#define TIMIL0_P	0x00
+#define TIMIL1_P	0x01
+#define TIMIL2_P	0x02
+#define TOVF_ERR0_P		0x04
+#define TOVF_ERR1_P		0x05
+#define TOVF_ERR2_P		0x06
+#define TRUN0_P		0x0C
+#define TRUN1_P		0x0D
+#define TRUN2_P		0x0E
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 		TOVF_ERR0
+#define TOVL_ERR1 		TOVF_ERR1
+#define TOVL_ERR2 		TOVF_ERR2
+#define TOVL_ERR0_P		TOVF_ERR0_P
+#define TOVL_ERR1_P 		TOVF_ERR1_P
+#define TOVL_ERR2_P 		TOVF_ERR2_P
+
+/* TIMERx_CONFIG Registers */
+#define PWM_OUT		0x0001
+#define WDTH_CAP	0x0002
+#define EXT_CLK		0x0003
+#define PULSE_HI	0x0004
+#define PERIOD_CNT	0x0008
+#define IRQ_ENA		0x0010
+#define TIN_SEL		0x0020
+#define OUT_DIS		0x0040
+#define CLK_SEL		0x0080
+#define TOGGLE_HI	0x0100
+#define EMU_RUN		0x0200
+#define ERR_TYP(x)	((x & 0x03) << 14)
+
+#define TMODE_P0		0x00
+#define TMODE_P1		0x01
+#define PULSE_HI_P		0x02
+#define PERIOD_CNT_P		0x03
+#define IRQ_ENA_P		0x04
+#define TIN_SEL_P		0x05
+#define OUT_DIS_P		0x06
+#define CLK_SEL_P		0x07
+#define TOGGLE_HI_P		0x08
+#define EMU_RUN_P		0x09
+#define ERR_TYP_P0		0x0E
+#define ERR_TYP_P1		0x0F
+
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
+
+/* AMGCTL Masks */
+#define AMCKEN			0x00000001	/* Enable CLKOUT */
+#define	AMBEN_NONE		0x00000000	/* All Banks Disabled								*/
+#define AMBEN_B0		0x00000002	/* Enable Asynchronous Memory Bank 0 only */
+#define AMBEN_B0_B1		0x00000004	/* Enable Asynchronous Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2		0x00000006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL		0x00000008	/* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
+
+/* AMGCTL Bit Positions */
+#define AMCKEN_P		0x00000000	/* Enable CLKOUT */
+#define AMBEN_P0		0x00000001	/* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
+#define AMBEN_P1		0x00000002	/* Asynchronous Memory Enable, 010 - banks 0&1 enabled,  011 - banks 0-3 enabled */
+#define AMBEN_P2		0x00000003	/* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
+
+/* AMBCTL0 Masks */
+#define B0RDYEN	0x00000001	/* Bank 0 RDY Enable, 0=disable, 1=enable */
+#define B0RDYPOL 0x00000002	/* Bank 0 RDY Active high, 0=active low, 1=active high */
+#define B0TT_1	0x00000004	/* Bank 0 Transition Time from Read to Write = 1 cycle */
+#define B0TT_2	0x00000008	/* Bank 0 Transition Time from Read to Write = 2 cycles */
+#define B0TT_3	0x0000000C	/* Bank 0 Transition Time from Read to Write = 3 cycles */
+#define B0TT_4	0x00000000	/* Bank 0 Transition Time from Read to Write = 4 cycles */
+#define B0ST_1	0x00000010	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
+#define B0ST_2	0x00000020	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
+#define B0ST_3	0x00000030	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
+#define B0ST_4	0x00000000	/* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
+#define B0HT_1	0x00000040	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
+#define B0HT_2	0x00000080	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
+#define B0HT_3	0x000000C0	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
+#define B0HT_0	0x00000000	/* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
+#define B0RAT_1			0x00000100	/* Bank 0 Read Access Time = 1 cycle */
+#define B0RAT_2			0x00000200	/* Bank 0 Read Access Time = 2 cycles */
+#define B0RAT_3			0x00000300	/* Bank 0 Read Access Time = 3 cycles */
+#define B0RAT_4			0x00000400	/* Bank 0 Read Access Time = 4 cycles */
+#define B0RAT_5			0x00000500	/* Bank 0 Read Access Time = 5 cycles */
+#define B0RAT_6			0x00000600	/* Bank 0 Read Access Time = 6 cycles */
+#define B0RAT_7			0x00000700	/* Bank 0 Read Access Time = 7 cycles */
+#define B0RAT_8			0x00000800	/* Bank 0 Read Access Time = 8 cycles */
+#define B0RAT_9			0x00000900	/* Bank 0 Read Access Time = 9 cycles */
+#define B0RAT_10		0x00000A00	/* Bank 0 Read Access Time = 10 cycles */
+#define B0RAT_11		0x00000B00	/* Bank 0 Read Access Time = 11 cycles */
+#define B0RAT_12		0x00000C00	/* Bank 0 Read Access Time = 12 cycles */
+#define B0RAT_13		0x00000D00	/* Bank 0 Read Access Time = 13 cycles */
+#define B0RAT_14		0x00000E00	/* Bank 0 Read Access Time = 14 cycles */
+#define B0RAT_15		0x00000F00	/* Bank 0 Read Access Time = 15 cycles */
+#define B0WAT_1			0x00001000	/* Bank 0 Write Access Time = 1 cycle */
+#define B0WAT_2			0x00002000	/* Bank 0 Write Access Time = 2 cycles */
+#define B0WAT_3			0x00003000	/* Bank 0 Write Access Time = 3 cycles */
+#define B0WAT_4			0x00004000	/* Bank 0 Write Access Time = 4 cycles */
+#define B0WAT_5			0x00005000	/* Bank 0 Write Access Time = 5 cycles */
+#define B0WAT_6			0x00006000	/* Bank 0 Write Access Time = 6 cycles */
+#define B0WAT_7			0x00007000	/* Bank 0 Write Access Time = 7 cycles */
+#define B0WAT_8			0x00008000	/* Bank 0 Write Access Time = 8 cycles */
+#define B0WAT_9			0x00009000	/* Bank 0 Write Access Time = 9 cycles */
+#define B0WAT_10		0x0000A000	/* Bank 0 Write Access Time = 10 cycles */
+#define B0WAT_11		0x0000B000	/* Bank 0 Write Access Time = 11 cycles */
+#define B0WAT_12		0x0000C000	/* Bank 0 Write Access Time = 12 cycles */
+#define B0WAT_13		0x0000D000	/* Bank 0 Write Access Time = 13 cycles */
+#define B0WAT_14		0x0000E000	/* Bank 0 Write Access Time = 14 cycles */
+#define B0WAT_15		0x0000F000	/* Bank 0 Write Access Time = 15 cycles */
+#define B1RDYEN			0x00010000	/* Bank 1 RDY enable, 0=disable, 1=enable */
+#define B1RDYPOL		0x00020000	/* Bank 1 RDY Active high, 0=active low, 1=active high */
+#define B1TT_1			0x00040000	/* Bank 1 Transition Time from Read to Write = 1 cycle */
+#define B1TT_2			0x00080000	/* Bank 1 Transition Time from Read to Write = 2 cycles */
+#define B1TT_3			0x000C0000	/* Bank 1 Transition Time from Read to Write = 3 cycles */
+#define B1TT_4			0x00000000	/* Bank 1 Transition Time from Read to Write = 4 cycles */
+#define B1ST_1			0x00100000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B1ST_2			0x00200000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B1ST_3			0x00300000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B1ST_4			0x00000000	/* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B1HT_1			0x00400000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B1HT_2			0x00800000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B1HT_3			0x00C00000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B1HT_0			0x00000000	/* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B1RAT_1			0x01000000	/* Bank 1 Read Access Time = 1 cycle */
+#define B1RAT_2			0x02000000	/* Bank 1 Read Access Time = 2 cycles */
+#define B1RAT_3			0x03000000	/* Bank 1 Read Access Time = 3 cycles */
+#define B1RAT_4			0x04000000	/* Bank 1 Read Access Time = 4 cycles */
+#define B1RAT_5			0x05000000	/* Bank 1 Read Access Time = 5 cycles */
+#define B1RAT_6			0x06000000	/* Bank 1 Read Access Time = 6 cycles */
+#define B1RAT_7			0x07000000	/* Bank 1 Read Access Time = 7 cycles */
+#define B1RAT_8			0x08000000	/* Bank 1 Read Access Time = 8 cycles */
+#define B1RAT_9			0x09000000	/* Bank 1 Read Access Time = 9 cycles */
+#define B1RAT_10		0x0A000000	/* Bank 1 Read Access Time = 10 cycles */
+#define B1RAT_11		0x0B000000	/* Bank 1 Read Access Time = 11 cycles */
+#define B1RAT_12		0x0C000000	/* Bank 1 Read Access Time = 12 cycles */
+#define B1RAT_13		0x0D000000	/* Bank 1 Read Access Time = 13 cycles */
+#define B1RAT_14		0x0E000000	/* Bank 1 Read Access Time = 14 cycles */
+#define B1RAT_15		0x0F000000	/* Bank 1 Read Access Time = 15 cycles */
+#define B1WAT_1			0x10000000	/* Bank 1 Write Access Time = 1 cycle */
+#define B1WAT_2			0x20000000	/* Bank 1 Write Access Time = 2 cycles */
+#define B1WAT_3			0x30000000	/* Bank 1 Write Access Time = 3 cycles */
+#define B1WAT_4			0x40000000	/* Bank 1 Write Access Time = 4 cycles */
+#define B1WAT_5			0x50000000	/* Bank 1 Write Access Time = 5 cycles */
+#define B1WAT_6			0x60000000	/* Bank 1 Write Access Time = 6 cycles */
+#define B1WAT_7			0x70000000	/* Bank 1 Write Access Time = 7 cycles */
+#define B1WAT_8			0x80000000	/* Bank 1 Write Access Time = 8 cycles */
+#define B1WAT_9			0x90000000	/* Bank 1 Write Access Time = 9 cycles */
+#define B1WAT_10		0xA0000000	/* Bank 1 Write Access Time = 10 cycles */
+#define B1WAT_11		0xB0000000	/* Bank 1 Write Access Time = 11 cycles */
+#define B1WAT_12		0xC0000000	/* Bank 1 Write Access Time = 12 cycles */
+#define B1WAT_13		0xD0000000	/* Bank 1 Write Access Time = 13 cycles */
+#define B1WAT_14		0xE0000000	/* Bank 1 Write Access Time = 14 cycles */
+#define B1WAT_15		0xF0000000	/* Bank 1 Write Access Time = 15 cycles */
+
+/* AMBCTL1 Masks */
+#define B2RDYEN			0x00000001	/* Bank 2 RDY Enable, 0=disable, 1=enable */
+#define B2RDYPOL		0x00000002	/* Bank 2 RDY Active high, 0=active low, 1=active high */
+#define B2TT_1			0x00000004	/* Bank 2 Transition Time from Read to Write = 1 cycle */
+#define B2TT_2			0x00000008	/* Bank 2 Transition Time from Read to Write = 2 cycles */
+#define B2TT_3			0x0000000C	/* Bank 2 Transition Time from Read to Write = 3 cycles */
+#define B2TT_4			0x00000000	/* Bank 2 Transition Time from Read to Write = 4 cycles */
+#define B2ST_1			0x00000010	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B2ST_2			0x00000020	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B2ST_3			0x00000030	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B2ST_4			0x00000000	/* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B2HT_1			0x00000040	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B2HT_2			0x00000080	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B2HT_3			0x000000C0	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B2HT_0			0x00000000	/* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B2RAT_1			0x00000100	/* Bank 2 Read Access Time = 1 cycle */
+#define B2RAT_2			0x00000200	/* Bank 2 Read Access Time = 2 cycles */
+#define B2RAT_3			0x00000300	/* Bank 2 Read Access Time = 3 cycles */
+#define B2RAT_4			0x00000400	/* Bank 2 Read Access Time = 4 cycles */
+#define B2RAT_5			0x00000500	/* Bank 2 Read Access Time = 5 cycles */
+#define B2RAT_6			0x00000600	/* Bank 2 Read Access Time = 6 cycles */
+#define B2RAT_7			0x00000700	/* Bank 2 Read Access Time = 7 cycles */
+#define B2RAT_8			0x00000800	/* Bank 2 Read Access Time = 8 cycles */
+#define B2RAT_9			0x00000900	/* Bank 2 Read Access Time = 9 cycles */
+#define B2RAT_10		0x00000A00	/* Bank 2 Read Access Time = 10 cycles */
+#define B2RAT_11		0x00000B00	/* Bank 2 Read Access Time = 11 cycles */
+#define B2RAT_12		0x00000C00	/* Bank 2 Read Access Time = 12 cycles */
+#define B2RAT_13		0x00000D00	/* Bank 2 Read Access Time = 13 cycles */
+#define B2RAT_14		0x00000E00	/* Bank 2 Read Access Time = 14 cycles */
+#define B2RAT_15		0x00000F00	/* Bank 2 Read Access Time = 15 cycles */
+#define B2WAT_1			0x00001000	/* Bank 2 Write Access Time = 1 cycle */
+#define B2WAT_2			0x00002000	/* Bank 2 Write Access Time = 2 cycles */
+#define B2WAT_3			0x00003000	/* Bank 2 Write Access Time = 3 cycles */
+#define B2WAT_4			0x00004000	/* Bank 2 Write Access Time = 4 cycles */
+#define B2WAT_5			0x00005000	/* Bank 2 Write Access Time = 5 cycles */
+#define B2WAT_6			0x00006000	/* Bank 2 Write Access Time = 6 cycles */
+#define B2WAT_7			0x00007000	/* Bank 2 Write Access Time = 7 cycles */
+#define B2WAT_8			0x00008000	/* Bank 2 Write Access Time = 8 cycles */
+#define B2WAT_9			0x00009000	/* Bank 2 Write Access Time = 9 cycles */
+#define B2WAT_10		0x0000A000	/* Bank 2 Write Access Time = 10 cycles */
+#define B2WAT_11		0x0000B000	/* Bank 2 Write Access Time = 11 cycles */
+#define B2WAT_12		0x0000C000	/* Bank 2 Write Access Time = 12 cycles */
+#define B2WAT_13		0x0000D000	/* Bank 2 Write Access Time = 13 cycles */
+#define B2WAT_14		0x0000E000	/* Bank 2 Write Access Time = 14 cycles */
+#define B2WAT_15		0x0000F000	/* Bank 2 Write Access Time = 15 cycles */
+#define B3RDYEN			0x00010000	/* Bank 3 RDY enable, 0=disable, 1=enable */
+#define B3RDYPOL		0x00020000	/* Bank 3 RDY Active high, 0=active low, 1=active high */
+#define B3TT_1			0x00040000	/* Bank 3 Transition Time from Read to Write = 1 cycle */
+#define B3TT_2			0x00080000	/* Bank 3 Transition Time from Read to Write = 2 cycles */
+#define B3TT_3			0x000C0000	/* Bank 3 Transition Time from Read to Write = 3 cycles */
+#define B3TT_4			0x00000000	/* Bank 3 Transition Time from Read to Write = 4 cycles */
+#define B3ST_1			0x00100000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
+#define B3ST_2			0x00200000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
+#define B3ST_3			0x00300000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
+#define B3ST_4			0x00000000	/* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
+#define B3HT_1			0x00400000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
+#define B3HT_2			0x00800000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
+#define B3HT_3			0x00C00000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
+#define B3HT_0			0x00000000	/* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
+#define B3RAT_1			0x01000000	/* Bank 3 Read Access Time = 1 cycle */
+#define B3RAT_2			0x02000000	/* Bank 3 Read Access Time = 2 cycles */
+#define B3RAT_3			0x03000000	/* Bank 3 Read Access Time = 3 cycles */
+#define B3RAT_4			0x04000000	/* Bank 3 Read Access Time = 4 cycles */
+#define B3RAT_5			0x05000000	/* Bank 3 Read Access Time = 5 cycles */
+#define B3RAT_6			0x06000000	/* Bank 3 Read Access Time = 6 cycles */
+#define B3RAT_7			0x07000000	/* Bank 3 Read Access Time = 7 cycles */
+#define B3RAT_8			0x08000000	/* Bank 3 Read Access Time = 8 cycles */
+#define B3RAT_9			0x09000000	/* Bank 3 Read Access Time = 9 cycles */
+#define B3RAT_10		0x0A000000	/* Bank 3 Read Access Time = 10 cycles */
+#define B3RAT_11		0x0B000000	/* Bank 3 Read Access Time = 11 cycles */
+#define B3RAT_12		0x0C000000	/* Bank 3 Read Access Time = 12 cycles */
+#define B3RAT_13		0x0D000000	/* Bank 3 Read Access Time = 13 cycles */
+#define B3RAT_14		0x0E000000	/* Bank 3 Read Access Time = 14 cycles */
+#define B3RAT_15		0x0F000000	/* Bank 3 Read Access Time = 15 cycles */
+#define B3WAT_1			0x10000000	/* Bank 3 Write Access Time = 1 cycle */
+#define B3WAT_2			0x20000000	/* Bank 3 Write Access Time = 2 cycles */
+#define B3WAT_3			0x30000000	/* Bank 3 Write Access Time = 3 cycles */
+#define B3WAT_4			0x40000000	/* Bank 3 Write Access Time = 4 cycles */
+#define B3WAT_5			0x50000000	/* Bank 3 Write Access Time = 5 cycles */
+#define B3WAT_6			0x60000000	/* Bank 3 Write Access Time = 6 cycles */
+#define B3WAT_7			0x70000000	/* Bank 3 Write Access Time = 7 cycles */
+#define B3WAT_8			0x80000000	/* Bank 3 Write Access Time = 8 cycles */
+#define B3WAT_9			0x90000000	/* Bank 3 Write Access Time = 9 cycles */
+#define B3WAT_10		0xA0000000	/* Bank 3 Write Access Time = 10 cycles */
+#define B3WAT_11		0xB0000000	/* Bank 3 Write Access Time = 11 cycles */
+#define B3WAT_12		0xC0000000	/* Bank 3 Write Access Time = 12 cycles */
+#define B3WAT_13		0xD0000000	/* Bank 3 Write Access Time = 13 cycles */
+#define B3WAT_14		0xE0000000	/* Bank 3 Write Access Time = 14 cycles */
+#define B3WAT_15		0xF0000000	/* Bank 3 Write Access Time = 15 cycles */
+
+/* **********************  SDRAM CONTROLLER MASKS  *************************** */
+
+/* SDGCTL Masks */
+#define SCTLE			0x00000001	/* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
+#define CL_2			0x00000008	/* SDRAM CAS latency = 2 cycles */
+#define CL_3			0x0000000C	/* SDRAM CAS latency = 3 cycles */
+#define PFE			0x00000010	/* Enable SDRAM prefetch */
+#define PFP			0x00000020	/* Prefetch has priority over AMC requests */
+#define PASR_ALL		0x00000000	/* All 4 SDRAM Banks Refreshed In Self-Refresh				*/
+#define PASR_B0_B1		0x00000010	/* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh		*/
+#define PASR_B0			0x00000020	/* Only SDRAM Bank 0 Is Refreshed In Self-Refresh			*/
+#define TRAS_1			0x00000040	/* SDRAM tRAS = 1 cycle */
+#define TRAS_2			0x00000080	/* SDRAM tRAS = 2 cycles */
+#define TRAS_3			0x000000C0	/* SDRAM tRAS = 3 cycles */
+#define TRAS_4			0x00000100	/* SDRAM tRAS = 4 cycles */
+#define TRAS_5			0x00000140	/* SDRAM tRAS = 5 cycles */
+#define TRAS_6			0x00000180	/* SDRAM tRAS = 6 cycles */
+#define TRAS_7			0x000001C0	/* SDRAM tRAS = 7 cycles */
+#define TRAS_8			0x00000200	/* SDRAM tRAS = 8 cycles */
+#define TRAS_9			0x00000240	/* SDRAM tRAS = 9 cycles */
+#define TRAS_10			0x00000280	/* SDRAM tRAS = 10 cycles */
+#define TRAS_11			0x000002C0	/* SDRAM tRAS = 11 cycles */
+#define TRAS_12			0x00000300	/* SDRAM tRAS = 12 cycles */
+#define TRAS_13			0x00000340	/* SDRAM tRAS = 13 cycles */
+#define TRAS_14			0x00000380	/* SDRAM tRAS = 14 cycles */
+#define TRAS_15			0x000003C0	/* SDRAM tRAS = 15 cycles */
+#define TRP_1			0x00000800	/* SDRAM tRP = 1 cycle */
+#define TRP_2			0x00001000	/* SDRAM tRP = 2 cycles */
+#define TRP_3			0x00001800	/* SDRAM tRP = 3 cycles */
+#define TRP_4			0x00002000	/* SDRAM tRP = 4 cycles */
+#define TRP_5			0x00002800	/* SDRAM tRP = 5 cycles */
+#define TRP_6			0x00003000	/* SDRAM tRP = 6 cycles */
+#define TRP_7			0x00003800	/* SDRAM tRP = 7 cycles */
+#define TRCD_1			0x00008000	/* SDRAM tRCD = 1 cycle */
+#define TRCD_2			0x00010000	/* SDRAM tRCD = 2 cycles */
+#define TRCD_3			0x00018000	/* SDRAM tRCD = 3 cycles */
+#define TRCD_4			0x00020000	/* SDRAM tRCD = 4 cycles */
+#define TRCD_5			0x00028000	/* SDRAM tRCD = 5 cycles */
+#define TRCD_6			0x00030000	/* SDRAM tRCD = 6 cycles */
+#define TRCD_7			0x00038000	/* SDRAM tRCD = 7 cycles */
+#define TWR_1			0x00080000	/* SDRAM tWR = 1 cycle */
+#define TWR_2			0x00100000	/* SDRAM tWR = 2 cycles */
+#define TWR_3			0x00180000	/* SDRAM tWR = 3 cycles */
+#define PUPSD			0x00200000	/*Power-up start delay */
+#define PSM			0x00400000	/* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
+#define PSS				0x00800000	/* enable SDRAM power-up sequence on next SDRAM access */
+#define SRFS			0x01000000	/* Start SDRAM self-refresh mode */
+#define EBUFE			0x02000000	/* Enable external buffering timing */
+#define FBBRW			0x04000000	/* Fast back-to-back read write enable */
+#define EMREN			0x10000000	/* Extended mode register enable */
+#define TCSR			0x20000000	/* Temp compensated self refresh value 85 deg C */
+#define CDDBG			0x40000000	/* Tristate SDRAM controls during bus grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE			0x00000001	/* Enable SDRAM external bank */
+#define EBSZ_16			0x00000000	/* SDRAM external bank size = 16MB */
+#define EBSZ_32			0x00000002	/* SDRAM external bank size = 32MB */
+#define EBSZ_64			0x00000004	/* SDRAM external bank size = 64MB */
+#define EBSZ_128			0x00000006	/* SDRAM external bank size = 128MB */
+#define EBCAW_8			0x00000000	/* SDRAM external bank column address width = 8 bits */
+#define EBCAW_9			0x00000010	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_10			0x00000020	/* SDRAM external bank column address width = 9 bits */
+#define EBCAW_11			0x00000030	/* SDRAM external bank column address width = 9 bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI			0x00000001	/* SDRAM controller is idle  */
+#define SDSRA			0x00000002	/* SDRAM SDRAM self refresh is active */
+#define SDPUA			0x00000004	/* SDRAM power up active  */
+#define SDRS			0x00000008	/* SDRAM is in reset state */
+#define SDEASE		      0x00000010	/* SDRAM EAB sticky error status - W1C */
+#define BGSTAT			0x00000020	/* Bus granted */
+
+
+#endif				/* _DEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h
new file mode 100644
index 00000000..fb34934c
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/dma.h
@@ -0,0 +1,26 @@
+/* mach/dma.h - arch-specific DMA defines
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_DMA_CHANNELS 12
+
+#define CH_PPI          0
+#define CH_SPORT0_RX    1
+#define CH_SPORT0_TX    2
+#define CH_SPORT1_RX    3
+#define CH_SPORT1_TX    4
+#define CH_SPI          5
+#define CH_UART0_RX     6
+#define CH_UART0_TX     7
+#define CH_MEM_STREAM0_DEST     8	 /* TX */
+#define CH_MEM_STREAM0_SRC      9	 /* RX */
+#define CH_MEM_STREAM1_DEST     10	 /* TX */
+#define CH_MEM_STREAM1_SRC      11	 /* RX */
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
new file mode 100644
index 00000000..cce4f8fb
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 16
+
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+
+#define PORT_F GPIO_PF0
+
+#include <mach-common/ports-f.h>
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
new file mode 100644
index 00000000..70973375
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/irq.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _BF533_IRQ_H_
+#define _BF533_IRQ_H_
+
+#include <mach-common/irq.h>
+
+#define NR_PERI_INTS		24
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMA_ERROR		BFIN_IRQ(1)	/* DMA Error (general) */
+#define IRQ_PPI_ERROR		BFIN_IRQ(2)	/* PPI Error Interrupt */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(3)	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(4)	/* SPORT1 Error Interrupt */
+#define IRQ_SPI_ERROR		BFIN_IRQ(5)	/* SPI Error Interrupt */
+#define IRQ_UART0_ERROR		BFIN_IRQ(6)	/* UART Error Interrupt */
+#define IRQ_RTC			BFIN_IRQ(7)	/* RTC Interrupt */
+#define IRQ_PPI			BFIN_IRQ(8)	/* DMA0 Interrupt (PPI) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(9)	/* DMA1 Interrupt (SPORT0 RX) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(10)	/* DMA2 Interrupt (SPORT0 TX) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(11)	/* DMA3 Interrupt (SPORT1 RX) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(12)	/* DMA4 Interrupt (SPORT1 TX) */
+#define IRQ_SPI			BFIN_IRQ(13)	/* DMA5 Interrupt (SPI) */
+#define IRQ_UART0_RX		BFIN_IRQ(14)	/* DMA6 Interrupt (UART RX) */
+#define IRQ_UART0_TX		BFIN_IRQ(15)	/* DMA7 Interrupt (UART TX) */
+#define IRQ_TIMER0		BFIN_IRQ(16)	/* Timer 0 */
+#define IRQ_TIMER1		BFIN_IRQ(17)	/* Timer 1 */
+#define IRQ_TIMER2		BFIN_IRQ(18)	/* Timer 2 */
+#define IRQ_PROG_INTA		BFIN_IRQ(19)	/* Programmable Flags A (8) */
+#define IRQ_PROG_INTB		BFIN_IRQ(20)	/* Programmable Flags B (8) */
+#define IRQ_MEM_DMA0		BFIN_IRQ(21)	/* DMA8/9 Interrupt (Memory DMA Stream 0) */
+#define IRQ_MEM_DMA1		BFIN_IRQ(22)	/* DMA10/11 Interrupt (Memory DMA Stream 1) */
+#define IRQ_WATCH		BFIN_IRQ(23)	/* Watch Dog Timer */
+
+#define SYS_IRQS		31
+
+#define IRQ_PF0			33
+#define IRQ_PF1			34
+#define IRQ_PF2			35
+#define IRQ_PF3			36
+#define IRQ_PF4			37
+#define IRQ_PF5			38
+#define IRQ_PF6			39
+#define IRQ_PF7			40
+#define IRQ_PF8			41
+#define IRQ_PF9			42
+#define IRQ_PF10		43
+#define IRQ_PF11		44
+#define IRQ_PF12		45
+#define IRQ_PF13		46
+#define IRQ_PF14		47
+#define IRQ_PF15		48
+
+#define GPIO_IRQ_BASE		IRQ_PF0
+
+#define NR_MACH_IRQS		(IRQ_PF15 + 1)
+
+/* IAR0 BIT FIELDS */
+#define RTC_ERROR_POS		28
+#define UART_ERROR_POS		24
+#define SPORT1_ERROR_POS	20
+#define SPI_ERROR_POS		16
+#define SPORT0_ERROR_POS	12
+#define PPI_ERROR_POS		8
+#define DMA_ERROR_POS		4
+#define PLLWAKE_ERROR_POS	0
+
+/* IAR1 BIT FIELDS */
+#define DMA7_UARTTX_POS		28
+#define DMA6_UARTRX_POS		24
+#define DMA5_SPI_POS		20
+#define DMA4_SPORT1TX_POS	16
+#define DMA3_SPORT1RX_POS	12
+#define DMA2_SPORT0TX_POS	8
+#define DMA1_SPORT0RX_POS	4
+#define DMA0_PPI_POS		0
+
+/* IAR2 BIT FIELDS */
+#define WDTIMER_POS		28
+#define MEMDMA1_POS		24
+#define MEMDMA0_POS		20
+#define PFB_POS			16
+#define PFA_POS			12
+#define TIMER2_POS		8
+#define TIMER1_POS		4
+#define TIMER0_POS		0
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
new file mode 100644
index 00000000..197af1a3
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -0,0 +1,139 @@
+/*
+ * BF533 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
+
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE	0x20300000	 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK2_BASE	0x20200000	 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK1_BASE	0x20100000	 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE	0x00100000	/* 1M */
+#define ASYNC_BANK0_BASE	0x20000000	 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE	0x00100000	/* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x400
+
+/* Level 1 Memory */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
+#else
+#define BFIN_ICACHESIZE	(0*1024)
+#endif
+
+/* Memory Map for ADSP-BF533 processors */
+
+#ifdef CONFIG_BF533
+#define L1_CODE_START       0xFFA00000
+#define L1_DATA_A_START     0xFF800000
+#define L1_DATA_B_START     0xFF900000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0x14000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0x14000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x8000
+#define L1_DATA_B_LENGTH      0x8000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF532 processors */
+
+#ifdef CONFIG_BF532
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+
+#ifdef CONFIG_BFIN_ICACHE
+#define L1_CODE_LENGTH      (0xC000 - 0x4000)
+#else
+#define L1_CODE_LENGTH      0xC000
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define L1_DATA_B_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
+#endif
+
+/* Memory Map for ADSP-BF531 processors */
+
+#ifdef CONFIG_BF531
+#define L1_CODE_START       0xFFA08000
+#define L1_DATA_A_START     0xFF804000
+#define L1_DATA_B_START     0xFF904000
+#define L1_CODE_LENGTH      0x4000
+#define L1_DATA_B_LENGTH      0x0000
+
+
+#ifdef CONFIG_BFIN_DCACHE
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      (0x4000 - 0x4000)
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB  | PORT_PREF0)
+#define L1_DATA_A_LENGTH      0x4000
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif
+
+#endif
+
+#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h
new file mode 100644
index 00000000..94cca674
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/pll.h
@@ -0,0 +1 @@
+#include <mach-common/pll.h>
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
new file mode 100644
index 00000000..96f5d912
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
+
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF11))
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF12))
+
+#define P_SPORT1_TSCLK	(P_DONTCARE)
+#define P_SPORT1_RSCLK	(P_DONTCARE)
+#define P_SPORT0_TSCLK	(P_DONTCARE)
+#define P_SPORT0_RSCLK	(P_DONTCARE)
+#define P_UART0_RX	(P_DONTCARE)
+#define P_UART0_TX	(P_DONTCARE)
+#define P_SPORT1_DRSEC	(P_DONTCARE)
+#define P_SPORT1_RFS	(P_DONTCARE)
+#define P_SPORT1_DTPRI	(P_DONTCARE)
+#define P_SPORT1_DTSEC	(P_DONTCARE)
+#define P_SPORT1_TFS	(P_DONTCARE)
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DONTCARE)
+#define P_SPORT0_RFS	(P_DONTCARE)
+#define P_SPORT0_DTPRI	(P_DONTCARE)
+#define P_SPORT0_DTSEC	(P_DONTCARE)
+#define P_SPORT0_TFS	(P_DONTCARE)
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MISO	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
+#define P_TMR2		(P_DONTCARE)
+#define P_TMR1		(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF1))
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
new file mode 100644
index 00000000..8f714cf8
--- /dev/null
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -0,0 +1,44 @@
+/*
+ * Set up the interrupt priorities
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+	/* Program the IAR0 Register with the configured priority */
+	bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
+			    ((CONFIG_DMA_ERROR - 7) << DMA_ERROR_POS) |
+			    ((CONFIG_PPI_ERROR - 7) << PPI_ERROR_POS) |
+			    ((CONFIG_SPORT0_ERROR - 7) << SPORT0_ERROR_POS) |
+			    ((CONFIG_SPI_ERROR - 7) << SPI_ERROR_POS) |
+			    ((CONFIG_SPORT1_ERROR - 7) << SPORT1_ERROR_POS) |
+			    ((CONFIG_UART_ERROR - 7) << UART_ERROR_POS) |
+			    ((CONFIG_RTC_ERROR - 7) << RTC_ERROR_POS));
+
+	bfin_write_SIC_IAR1(((CONFIG_DMA0_PPI - 7) << DMA0_PPI_POS) |
+			    ((CONFIG_DMA1_SPORT0RX - 7) << DMA1_SPORT0RX_POS) |
+			    ((CONFIG_DMA2_SPORT0TX - 7) << DMA2_SPORT0TX_POS) |
+			    ((CONFIG_DMA3_SPORT1RX - 7) << DMA3_SPORT1RX_POS) |
+			    ((CONFIG_DMA4_SPORT1TX - 7) << DMA4_SPORT1TX_POS) |
+			    ((CONFIG_DMA5_SPI - 7) << DMA5_SPI_POS) |
+			    ((CONFIG_DMA6_UARTRX - 7) << DMA6_UARTRX_POS) |
+			    ((CONFIG_DMA7_UARTTX - 7) << DMA7_UARTTX_POS));
+
+	bfin_write_SIC_IAR2(((CONFIG_TIMER0 - 7) << TIMER0_POS) |
+			    ((CONFIG_TIMER1 - 7) << TIMER1_POS) |
+			    ((CONFIG_TIMER2 - 7) << TIMER2_POS) |
+			    ((CONFIG_PFA - 7) << PFA_POS) |
+			    ((CONFIG_PFB - 7) << PFB_POS) |
+			    ((CONFIG_MEMDMA0 - 7) << MEMDMA0_POS) |
+			    ((CONFIG_MEMDMA1 - 7) << MEMDMA1_POS) |
+			    ((CONFIG_WDTIMER - 7) << WDTIMER_POS));
+
+	SSYNC();
+}