Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

10 files changed, 1155 insertions, 0 deletions

diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
new file mode 100644
index 00000000..a99dc15a
--- /dev/null
+++ b/arch/arm/plat-iop/Makefile
@@ -0,0 +1,35 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y :=
+
+# IOP32X
+obj-$(CONFIG_ARCH_IOP32X) += gpio.o
+obj-$(CONFIG_ARCH_IOP32X) += i2c.o
+obj-$(CONFIG_ARCH_IOP32X) += pci.o
+obj-$(CONFIG_ARCH_IOP32X) += setup.o
+obj-$(CONFIG_ARCH_IOP32X) += time.o
+obj-$(CONFIG_ARCH_IOP32X) += cp6.o
+obj-$(CONFIG_ARCH_IOP32X) += adma.o
+obj-$(CONFIG_ARCH_IOP32X) += pmu.o
+obj-$(CONFIG_ARCH_IOP32X) += restart.o
+
+# IOP33X
+obj-$(CONFIG_ARCH_IOP33X) += gpio.o
+obj-$(CONFIG_ARCH_IOP33X) += i2c.o
+obj-$(CONFIG_ARCH_IOP33X) += pci.o
+obj-$(CONFIG_ARCH_IOP33X) += setup.o
+obj-$(CONFIG_ARCH_IOP33X) += time.o
+obj-$(CONFIG_ARCH_IOP33X) += cp6.o
+obj-$(CONFIG_ARCH_IOP33X) += adma.o
+obj-$(CONFIG_ARCH_IOP33X) += pmu.o
+obj-$(CONFIG_ARCH_IOP33X) += restart.o
+
+# IOP13XX
+obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
+obj-$(CONFIG_ARCH_IOP13XX) += time.o
+
+obj-m                  :=
+obj-n                  :=
+obj-                   :=
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
new file mode 100644
index 00000000..1ff6a37e
--- /dev/null
+++ b/arch/arm/plat-iop/adma.c
@@ -0,0 +1,207 @@
+/*
+ * platform device definitions for the iop3xx dma/xor engines
+ * Copyright © 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/hardware/iop3xx.h>
+#include <linux/dma-mapping.h>
+#include <mach/adma.h>
+#include <asm/hardware/iop_adma.h>
+
+#ifdef CONFIG_ARCH_IOP32X
+#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
+#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
+#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
+
+#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
+#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
+#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
+
+#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
+#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
+#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+#define IRQ_DMA0_EOT IRQ_IOP33X_DMA0_EOT
+#define IRQ_DMA0_EOC IRQ_IOP33X_DMA0_EOC
+#define IRQ_DMA0_ERR IRQ_IOP33X_DMA0_ERR
+
+#define IRQ_DMA1_EOT IRQ_IOP33X_DMA1_EOT
+#define IRQ_DMA1_EOC IRQ_IOP33X_DMA1_EOC
+#define IRQ_DMA1_ERR IRQ_IOP33X_DMA1_ERR
+
+#define IRQ_AA_EOT IRQ_IOP33X_AA_EOT
+#define IRQ_AA_EOC IRQ_IOP33X_AA_EOC
+#define IRQ_AA_ERR IRQ_IOP33X_AA_ERR
+#endif
+/* AAU and DMA Channels */
+static struct resource iop3xx_dma_0_resources[] = {
+	[0] = {
+		.start = IOP3XX_DMA_PHYS_BASE(0),
+		.end = IOP3XX_DMA_UPPER_PA(0),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_DMA0_EOT,
+		.end = IRQ_DMA0_EOT,
+		.flags = IORESOURCE_IRQ
+	},
+	[2] = {
+		.start = IRQ_DMA0_EOC,
+		.end = IRQ_DMA0_EOC,
+		.flags = IORESOURCE_IRQ
+	},
+	[3] = {
+		.start = IRQ_DMA0_ERR,
+		.end = IRQ_DMA0_ERR,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct resource iop3xx_dma_1_resources[] = {
+	[0] = {
+		.start = IOP3XX_DMA_PHYS_BASE(1),
+		.end = IOP3XX_DMA_UPPER_PA(1),
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_DMA1_EOT,
+		.end = IRQ_DMA1_EOT,
+		.flags = IORESOURCE_IRQ
+	},
+	[2] = {
+		.start = IRQ_DMA1_EOC,
+		.end = IRQ_DMA1_EOC,
+		.flags = IORESOURCE_IRQ
+	},
+	[3] = {
+		.start = IRQ_DMA1_ERR,
+		.end = IRQ_DMA1_ERR,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+
+static struct resource iop3xx_aau_resources[] = {
+	[0] = {
+		.start = IOP3XX_AAU_PHYS_BASE,
+		.end = IOP3XX_AAU_UPPER_PA,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_AA_EOT,
+		.end = IRQ_AA_EOT,
+		.flags = IORESOURCE_IRQ
+	},
+	[2] = {
+		.start = IRQ_AA_EOC,
+		.end = IRQ_AA_EOC,
+		.flags = IORESOURCE_IRQ
+	},
+	[3] = {
+		.start = IRQ_AA_ERR,
+		.end = IRQ_AA_ERR,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
+
+static struct iop_adma_platform_data iop3xx_dma_0_data = {
+	.hw_id = DMA0_ID,
+	.pool_size = PAGE_SIZE,
+};
+
+static struct iop_adma_platform_data iop3xx_dma_1_data = {
+	.hw_id = DMA1_ID,
+	.pool_size = PAGE_SIZE,
+};
+
+static struct iop_adma_platform_data iop3xx_aau_data = {
+	.hw_id = AAU_ID,
+	.pool_size = 3 * PAGE_SIZE,
+};
+
+struct platform_device iop3xx_dma_0_channel = {
+	.name = "iop-adma",
+	.id = 0,
+	.num_resources = 4,
+	.resource = iop3xx_dma_0_resources,
+	.dev = {
+		.dma_mask = &iop3xx_adma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.platform_data = (void *) &iop3xx_dma_0_data,
+	},
+};
+
+struct platform_device iop3xx_dma_1_channel = {
+	.name = "iop-adma",
+	.id = 1,
+	.num_resources = 4,
+	.resource = iop3xx_dma_1_resources,
+	.dev = {
+		.dma_mask = &iop3xx_adma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.platform_data = (void *) &iop3xx_dma_1_data,
+	},
+};
+
+struct platform_device iop3xx_aau_channel = {
+	.name = "iop-adma",
+	.id = 2,
+	.num_resources = 4,
+	.resource = iop3xx_aau_resources,
+	.dev = {
+		.dma_mask = &iop3xx_adma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(64),
+		.platform_data = (void *) &iop3xx_aau_data,
+	},
+};
+
+static int __init iop3xx_adma_cap_init(void)
+{
+	#ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */
+	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
+	#else
+	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
+	#endif
+
+	#ifdef CONFIG_ARCH_IOP32X /* the 32x DMA does not perform CRC32C */
+	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
+	#else
+	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
+	#endif
+
+	#ifdef CONFIG_ARCH_IOP32X /* the 32x AAU does not perform zero sum */
+	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
+	#else
+	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
+	#endif
+
+	return 0;
+}
+
+arch_initcall(iop3xx_adma_cap_init);
diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c
new file mode 100644
index 00000000..bab73e2c
--- /dev/null
+++ b/arch/arm/plat-iop/cp6.c
@@ -0,0 +1,51 @@
+/*
+ * IOP Coprocessor-6 access handler
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/init.h>
+#include <asm/traps.h>
+#include <asm/ptrace.h>
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+	u32 temp;
+
+        /* enable cp6 access */
+        asm volatile (
+		"mrc	p15, 0, %0, c15, c1, 0\n\t"
+		"orr	%0, %0, #(1 << 6)\n\t"
+		"mcr	p15, 0, %0, c15, c1, 0\n\t"
+		: "=r"(temp));
+
+	return 0;
+}
+
+/* permit kernel space cp6 access
+ * deny user space cp6 access
+ */
+static struct undef_hook cp6_hook = {
+	.instr_mask     = 0x0f000ff0,
+	.instr_val      = 0x0e000610,
+	.cpsr_mask      = MODE_MASK,
+	.cpsr_val       = SVC_MODE,
+	.fn             = cp6_trap,
+};
+
+void __init iop_init_cp6_handler(void)
+{
+	register_undef_hook(&cp6_hook);
+}
diff --git a/arch/arm/plat-iop/gpio.c b/arch/arm/plat-iop/gpio.c
new file mode 100644
index 00000000..e4de9be7
--- /dev/null
+++ b/arch/arm/plat-iop/gpio.c
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/plat-iop/gpio.c
+ * GPIO handling for Intel IOP3xx processors.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <asm/hardware/iop3xx.h>
+
+void gpio_line_config(int line, int direction)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (direction == GPIO_IN) {
+		*IOP3XX_GPOE |= 1 << line;
+	} else if (direction == GPIO_OUT) {
+		*IOP3XX_GPOE &= ~(1 << line);
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+
+int gpio_line_get(int line)
+{
+	return !!(*IOP3XX_GPID & (1 << line));
+}
+EXPORT_SYMBOL(gpio_line_get);
+
+void gpio_line_set(int line, int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (value == GPIO_LOW) {
+		*IOP3XX_GPOD &= ~(1 << line);
+	} else if (value == GPIO_HIGH) {
+		*IOP3XX_GPOD |= 1 << line;
+	}
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
+
+static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	gpio_line_config(gpio, GPIO_IN);
+	return 0;
+}
+
+static int iop3xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, GPIO_OUT);
+	return 0;
+}
+
+static int iop3xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_line_get(gpio);
+}
+
+static void iop3xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+static struct gpio_chip iop3xx_chip = {
+	.label			= "iop3xx",
+	.direction_input	= iop3xx_gpio_direction_input,
+	.get			= iop3xx_gpio_get_value,
+	.direction_output	= iop3xx_gpio_direction_output,
+	.set			= iop3xx_gpio_set_value,
+	.base			= 0,
+	.ngpio			= IOP3XX_N_GPIOS,
+};
+
+static int __init iop3xx_gpio_setup(void)
+{
+	return gpiochip_add(&iop3xx_chip);
+}
+arch_initcall(iop3xx_gpio_setup);
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
new file mode 100644
index 00000000..88215ad0
--- /dev/null
+++ b/arch/arm/plat-iop/i2c.c
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/plat-iop/i2c.c
+ *
+ * Author: Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop3xx.h>
+#include <asm/mach/arch.h>
+
+#ifdef CONFIG_ARCH_IOP32X
+#define IRQ_IOP3XX_I2C_0	IRQ_IOP32X_I2C_0
+#define IRQ_IOP3XX_I2C_1	IRQ_IOP32X_I2C_1
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+#define IRQ_IOP3XX_I2C_0	IRQ_IOP33X_I2C_0
+#define IRQ_IOP3XX_I2C_1	IRQ_IOP33X_I2C_1
+#endif
+
+static struct resource iop3xx_i2c0_resources[] = {
+	[0] = {
+		.start	= 0xfffff680,
+		.end	= 0xfffff697,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP3XX_I2C_0,
+		.end	= IRQ_IOP3XX_I2C_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device iop3xx_i2c0_device = {
+	.name		= "IOP3xx-I2C",
+	.id		= 0,
+	.num_resources	= 2,
+	.resource	= iop3xx_i2c0_resources,
+};
+
+
+static struct resource iop3xx_i2c1_resources[] = {
+	[0] = {
+		.start	= 0xfffff6a0,
+		.end	= 0xfffff6b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IOP3XX_I2C_1,
+		.end	= IRQ_IOP3XX_I2C_1,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device iop3xx_i2c1_device = {
+	.name		= "IOP3xx-I2C",
+	.id		= 1,
+	.num_resources	= 2,
+	.resource	= iop3xx_i2c1_resources,
+};
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
new file mode 100644
index 00000000..0da42058
--- /dev/null
+++ b/arch/arm/plat-iop/pci.c
@@ -0,0 +1,417 @@
+/*
+ * arch/arm/plat-iop/pci.c
+ *
+ * PCI support for the Intel IOP32X and IOP33X processors
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/signal.h>
+#include <mach/hardware.h>
+#include <asm/mach/pci.h>
+#include <asm/hardware/iop3xx.h>
+
+// #define DEBUG
+
+#ifdef DEBUG
+#define  DBG(x...) printk(x)
+#else
+#define  DBG(x...) do { } while (0)
+#endif
+
+/*
+ * This routine builds either a type0 or type1 configuration command.  If the
+ * bus is on the 803xx then a type0 made, else a type1 is created.
+ */
+static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	u32 addr;
+
+	if (sys->busnr == bus->number)
+		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
+	else
+		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
+
+	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
+
+	return addr;
+}
+
+/*
+ * This routine checks the status of the last configuration cycle.  If an error
+ * was detected it returns a 1, else it returns a 0.  The errors being checked
+ * are parity, master abort, target abort (master and target).  These types of
+ * errors occur during a config cycle where there is no device, like during
+ * the discovery stage.
+ */
+static int iop3xx_pci_status(void)
+{
+	unsigned int status;
+	int ret = 0;
+
+	/*
+	 * Check the status registers.
+	 */
+	status = *IOP3XX_ATUSR;
+	if (status & 0xf900) {
+		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
+		*IOP3XX_ATUSR = status & 0xf900;
+		ret = 1;
+	}
+
+	status = *IOP3XX_ATUISR;
+	if (status & 0x679f) {
+		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
+		*IOP3XX_ATUISR = status & 0x679f;
+		ret = 1;
+	}
+
+	return ret;
+}
+
+/*
+ * Simply write the address register and read the configuration
+ * data.  Note that the 4 nops ensure that we are able to handle
+ * a delayed abort (in theory.)
+ */
+static u32 iop3xx_read(unsigned long addr)
+{
+	u32 val;
+
+	__asm__ __volatile__(
+		"str	%1, [%2]\n\t"
+		"ldr	%0, [%3]\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		: "=r" (val)
+		: "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+
+	return val;
+}
+
+/*
+ * The read routines must check the error status of the last configuration
+ * cycle.  If there was an error, the routine returns all hex f's.
+ */
+static int
+iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 *value)
+{
+	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+	u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
+
+	if (iop3xx_pci_status())
+		val = 0xffffffff;
+
+	*value = val;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+		int size, u32 value)
+{
+	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
+	u32 val;
+
+	if (size != 4) {
+		val = iop3xx_read(addr);
+		if (iop3xx_pci_status())
+			return PCIBIOS_SUCCESSFUL;
+
+		where = (where & 3) * 8;
+
+		if (size == 1)
+			val &= ~(0xff << where);
+		else
+			val &= ~(0xffff << where);
+
+		*IOP3XX_OCCDR = val | value << where;
+	} else {
+		asm volatile(
+			"str	%1, [%2]\n\t"
+			"str	%0, [%3]\n\t"
+			"nop\n\t"
+			"nop\n\t"
+			"nop\n\t"
+			"nop\n\t"
+			:
+			: "r" (value), "r" (addr),
+			  "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops iop3xx_ops = {
+	.read	= iop3xx_read_config,
+	.write	= iop3xx_write_config,
+};
+
+/*
+ * When a PCI device does not exist during config cycles, the 80200 gets a
+ * bus error instead of returning 0xffffffff. This handler simply returns.
+ */
+static int
+iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
+		addr, fsr, regs->ARM_pc, regs->ARM_lr);
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return 0;
+}
+
+int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	struct resource *res;
+
+	if (nr != 0)
+		return 0;
+
+	res = kzalloc(2 * sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		panic("PCI: unable to alloc resources");
+
+	res[0].start = IOP3XX_PCI_LOWER_IO_PA;
+	res[0].end   = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
+	res[0].name  = "IOP3XX PCI I/O Space";
+	res[0].flags = IORESOURCE_IO;
+	request_resource(&ioport_resource, &res[0]);
+
+	res[1].start = IOP3XX_PCI_LOWER_MEM_PA;
+	res[1].end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
+	res[1].name  = "IOP3XX PCI Memory Space";
+	res[1].flags = IORESOURCE_MEM;
+	request_resource(&iomem_resource, &res[1]);
+
+	/*
+	 * Use whatever translation is already setup.
+	 */
+	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
+	sys->io_offset  = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
+
+	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
+	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
+
+	return 1;
+}
+
+struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_root_bus(NULL, sys->busnr, &iop3xx_ops, sys,
+				 &sys->resources);
+}
+
+void __init iop3xx_atu_setup(void)
+{
+	/* BAR 0 ( Disabled ) */
+	*IOP3XX_IAUBAR0 = 0x0;
+	*IOP3XX_IABAR0  = 0x0;
+	*IOP3XX_IATVR0  = 0x0;
+	*IOP3XX_IALR0   = 0x0;
+
+	/* BAR 1 ( Disabled ) */
+	*IOP3XX_IAUBAR1 = 0x0;
+	*IOP3XX_IABAR1  = 0x0;
+	*IOP3XX_IALR1   = 0x0;
+
+	/* BAR 2 (1:1 mapping with Physical RAM) */
+	/* Set limit and enable */
+	*IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
+	*IOP3XX_IAUBAR2 = 0x0;
+
+	/* Align the inbound bar with the base of memory */
+	*IOP3XX_IABAR2 = PHYS_OFFSET |
+			       PCI_BASE_ADDRESS_MEM_TYPE_64 |
+			       PCI_BASE_ADDRESS_MEM_PREFETCH;
+
+	*IOP3XX_IATVR2 = PHYS_OFFSET;
+
+	/* Outbound window 0 */
+	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
+	*IOP3XX_OUMWTVR0 = 0;
+
+	/* Outbound window 1 */
+	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
+	*IOP3XX_OUMWTVR1 = 0;
+
+	/* BAR 3 ( Disabled ) */
+	*IOP3XX_IAUBAR3 = 0x0;
+	*IOP3XX_IABAR3  = 0x0;
+	*IOP3XX_IATVR3  = 0x0;
+	*IOP3XX_IALR3   = 0x0;
+
+	/* Setup the I/O Bar
+	 */
+	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
+
+	/* Enable inbound and outbound cycles
+	 */
+	*IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+			       PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	*IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
+}
+
+void __init iop3xx_atu_disable(void)
+{
+	*IOP3XX_ATUCMD = 0;
+	*IOP3XX_ATUCR = 0;
+
+	/* wait for cycles to quiesce */
+	while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
+				     IOP3XX_PCSR_IN_Q_BUSY))
+		cpu_relax();
+
+	/* BAR 0 ( Disabled ) */
+	*IOP3XX_IAUBAR0 = 0x0;
+	*IOP3XX_IABAR0  = 0x0;
+	*IOP3XX_IATVR0  = 0x0;
+	*IOP3XX_IALR0   = 0x0;
+
+	/* BAR 1 ( Disabled ) */
+	*IOP3XX_IAUBAR1 = 0x0;
+	*IOP3XX_IABAR1  = 0x0;
+	*IOP3XX_IALR1   = 0x0;
+
+	/* BAR 2 ( Disabled ) */
+	*IOP3XX_IAUBAR2 = 0x0;
+	*IOP3XX_IABAR2  = 0x0;
+	*IOP3XX_IATVR2  = 0x0;
+	*IOP3XX_IALR2   = 0x0;
+
+	/* BAR 3 ( Disabled ) */
+	*IOP3XX_IAUBAR3 = 0x0;
+	*IOP3XX_IABAR3  = 0x0;
+	*IOP3XX_IATVR3  = 0x0;
+	*IOP3XX_IALR3   = 0x0;
+
+	/* Clear the outbound windows */
+	*IOP3XX_OIOWTVR  = 0;
+
+	/* Outbound window 0 */
+	*IOP3XX_OMWTVR0 = 0;
+	*IOP3XX_OUMWTVR0 = 0;
+
+	/* Outbound window 1 */
+	*IOP3XX_OMWTVR1 = 0;
+	*IOP3XX_OUMWTVR1 = 0;
+}
+
+/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
+int init_atu;
+
+int iop3xx_get_init_atu(void) {
+	/* check if default has been overridden */
+	if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
+		return init_atu;
+	else
+		return IOP3XX_INIT_ATU_DISABLE;
+}
+
+static void __init iop3xx_atu_debug(void)
+{
+	DBG("PCI: Intel IOP3xx PCI init.\n");
+	DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
+		*IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
+	DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
+		*IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
+	DBG("PCI: Outbound IO window: PCI 0x%08x\n",
+		*IOP3XX_OIOWTVR);
+
+	DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		*IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
+	DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
+		*IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
+	DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		*IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
+	DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		*IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
+
+	DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
+
+	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
+	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
+
+	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
+}
+
+/* for platforms that might be host-bus-adapters */
+void __init iop3xx_pci_preinit_cond(void)
+{
+	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
+		iop3xx_atu_disable();
+		iop3xx_atu_setup();
+		iop3xx_atu_debug();
+	}
+}
+
+void __init iop3xx_pci_preinit(void)
+{
+	pcibios_min_io = 0;
+	pcibios_min_mem = 0;
+
+	iop3xx_atu_disable();
+	iop3xx_atu_setup();
+	iop3xx_atu_debug();
+}
+
+/* allow init_atu to be user overridden */
+static int __init iop3xx_init_atu_setup(char *str)
+{
+	init_atu = IOP3XX_INIT_ATU_DEFAULT;
+	if (str) {
+		while (*str != '\0') {
+			switch (*str) {
+			case 'y':
+			case 'Y':
+				init_atu = IOP3XX_INIT_ATU_ENABLE;
+				break;
+			case 'n':
+			case 'N':
+				init_atu = IOP3XX_INIT_ATU_DISABLE;
+				break;
+			case ',':
+			case '=':
+				break;
+			default:
+				printk(KERN_DEBUG "\"%s\" malformed at "
+					    "character: \'%c\'",
+					    __func__,
+					    *str);
+				*(str + 1) = '\0';
+			}
+			str++;
+		}
+	}
+
+	return 1;
+}
+
+__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
+
diff --git a/arch/arm/plat-iop/pmu.c b/arch/arm/plat-iop/pmu.c
new file mode 100644
index 00000000..a2024b86
--- /dev/null
+++ b/arch/arm/plat-iop/pmu.c
@@ -0,0 +1,40 @@
+/*
+ * PMU IRQ registration for the iop3xx xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource pmu_resource = {
+#ifdef CONFIG_ARCH_IOP32X
+	.start	= IRQ_IOP32X_CORE_PMU,
+	.end	= IRQ_IOP32X_CORE_PMU,
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+	.start	= IRQ_IOP33X_CORE_PMU,
+	.end	= IRQ_IOP33X_CORE_PMU,
+#endif
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+static int __init iop3xx_pmu_init(void)
+{
+	platform_device_register(&pmu_device);
+	return 0;
+}
+
+arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/plat-iop/restart.c b/arch/arm/plat-iop/restart.c
new file mode 100644
index 00000000..33fa699a
--- /dev/null
+++ b/arch/arm/plat-iop/restart.c
@@ -0,0 +1,20 @@
+/*
+ * restart.c
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/iop3xx.h>
+#include <asm/system_misc.h>
+#include <mach/hardware.h>
+
+void iop3xx_restart(char mode, const char *cmd)
+{
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	soft_restart(0);
+}
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
new file mode 100644
index 00000000..bade586f
--- /dev/null
+++ b/arch/arm/plat-iop/setup.c
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-iop/setup.c
+ *
+ * Author: Nicolas Pitre <nico@fluxnic.net>
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ * Copyright (C) 2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/iop3xx.h>
+
+/*
+ * Standard IO mapping for all IOP3xx based systems.  Note that
+ * the IOP3xx OCCDR must be mapped uncached and unbuffered.
+ */
+static struct map_desc iop3xx_std_desc[] __initdata = {
+	 {	/* mem mapped registers */
+		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
+		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
+		.length		= IOP3XX_PERIPHERAL_SIZE,
+		.type		= MT_UNCACHED,
+	 }, {	/* PCI IO space */
+		.virtual	= IOP3XX_PCI_LOWER_IO_VA,
+		.pfn		= __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA),
+		.length		= IOP3XX_PCI_IO_WINDOW_SIZE,
+		.type		= MT_DEVICE,
+	 },
+};
+
+void __init iop3xx_map_io(void)
+{
+	iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
+}
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
new file mode 100644
index 00000000..cbfbbe46
--- /dev/null
+++ b/arch/arm/plat-iop/time.c
@@ -0,0 +1,175 @@
+/*
+ * arch/arm/plat-iop/time.c
+ *
+ * Timer code for IOP32x and IOP33x based systems
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright 2002-2003 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/export.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sched_clock.h>
+#include <asm/uaccess.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <mach/time.h>
+
+/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define IOP_MIN_RANGE 4
+
+/*
+ * IOP clocksource (free-running timer 1).
+ */
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
+{
+	return 0xffffffffu - read_tcr1();
+}
+
+static struct clocksource iop_clocksource = {
+	.name 		= "iop_timer1",
+	.rating		= 300,
+	.read		= iop_clocksource_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * IOP sched_clock() implementation via its clocksource.
+ */
+static u32 notrace iop_read_sched_clock(void)
+{
+	return 0xffffffffu - read_tcr1();
+}
+
+/*
+ * IOP clockevents (interrupting timer 0).
+ */
+static int iop_set_next_event(unsigned long delta,
+			      struct clock_event_device *unused)
+{
+	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
+
+	BUG_ON(delta == 0);
+	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
+	write_tcr0(delta);
+	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
+
+	return 0;
+}
+
+static unsigned long ticks_per_jiffy;
+
+static void iop_set_mode(enum clock_event_mode mode,
+			 struct clock_event_device *unused)
+{
+	u32 tmr = read_tmr0();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		write_tmr0(tmr & ~IOP_TMR_EN);
+		write_tcr0(ticks_per_jiffy - 1);
+		write_trr0(ticks_per_jiffy - 1);
+		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* ->set_next_event sets period and enables timer */
+		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		tmr |= IOP_TMR_EN;
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	default:
+		tmr &= ~IOP_TMR_EN;
+		break;
+	}
+
+	write_tmr0(tmr);
+}
+
+static struct clock_event_device iop_clockevent = {
+	.name		= "iop_timer0",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating         = 300,
+	.set_next_event	= iop_set_next_event,
+	.set_mode	= iop_set_mode,
+};
+
+static irqreturn_t
+iop_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	write_tisr(1);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction iop_timer_irq = {
+	.name		= "IOP Timer Tick",
+	.handler	= iop_timer_interrupt,
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.dev_id		= &iop_clockevent,
+};
+
+static unsigned long iop_tick_rate;
+unsigned long get_iop_tick_rate(void)
+{
+	return iop_tick_rate;
+}
+EXPORT_SYMBOL(get_iop_tick_rate);
+
+void __init iop_init_time(unsigned long tick_rate)
+{
+	u32 timer_ctl;
+
+	setup_sched_clock(iop_read_sched_clock, 32, tick_rate);
+
+	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
+	iop_tick_rate = tick_rate;
+
+	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
+			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
+
+	/*
+	 * Set up interrupting clockevent timer 0.
+	 */
+	write_tmr0(timer_ctl & ~IOP_TMR_EN);
+	write_tisr(1);
+	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+	clockevents_calc_mult_shift(&iop_clockevent,
+				    tick_rate, IOP_MIN_RANGE);
+	iop_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
+	iop_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xf, &iop_clockevent);
+	iop_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&iop_clockevent);
+
+	/*
+	 * Set up free-running clocksource timer 1.
+	 */
+	write_trr1(0xffffffff);
+	write_tcr1(0xffffffff);
+	write_tmr1(timer_ctl);
+	clocksource_register_hz(&iop_clocksource, tick_rate);
+}