Moved, renamed, and deleted files

The original directory structure was scattered and unorganized.
Changes are basically to make it look like kernel structure.

1 files changed, 171 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
new file mode 100644
index 00000000..1e544be9
--- /dev/null
+++ b/arch/arm/mach-pxa/sleep.S
@@ -0,0 +1,171 @@
+/*
+ * Low-level PXA250/210 sleep/wakeUp support
+ *
+ * Initial SA1110 code:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Adapted for PXA by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/smemc.h>
+#include <mach/pxa2xx-regs.h>
+
+#define MDREFR_KDIV	0x200a4000	// all banks
+#define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
+
+		.text
+
+#ifdef CONFIG_PXA3xx
+/*
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
+ */
+ENTRY(pxa3xx_finish_suspend)
+	mov	r0, #0x06		@ S2D3C4 mode
+	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
+
+20:	b	20b			@ waiting for sleep
+#endif /* CONFIG_PXA3xx */
+
+#ifdef CONFIG_PXA27x
+/*
+ * pxa27x_finish_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+ENTRY(pxa27x_finish_suspend)
+	@ Put the processor to sleep
+	@ (also workaround for sighting 28071)
+
+	@ prepare value for sleep mode
+	mov	r1, r0				@ sleep mode
+
+	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
+	mov	r2, #UNCACHED_PHYS_0
+
+	@ prepare SDRAM refresh settings
+	ldr	r4, =MDREFR
+	ldr	r5, [r4]
+
+	@ enable SDRAM self-refresh mode
+	orr	r5, r5, #MDREFR_SLFRSH
+
+	@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
+	ldr	r6, =MDREFR_KDIV
+	orr	r5, r5, r6
+
+	@ Intel PXA270 Specification Update notes problems sleeping
+	@ with core operating above 91 MHz
+	@ (see Errata 50, ...processor does not exit from sleep...)
+
+	ldr	r6, =CCCR
+	ldr	r8, [r6]		@ keep original value for resume
+
+	ldr	r7, =CCCR_SLEEP		@ prepare CCCR sleep value
+	mov	r0, #0x2		@ prepare value for CLKCFG
+
+	@ align execution to a cache line
+	b	pxa_cpu_do_suspend
+#endif
+
+#ifdef CONFIG_PXA25x
+/*
+ * pxa25x_finish_suspend()
+ *
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
+ */
+
+ENTRY(pxa25x_finish_suspend)
+	@ prepare value for sleep mode
+	mov	r1, r0				@ sleep mode
+
+	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
+	mov	r2, #UNCACHED_PHYS_0
+
+	@ prepare SDRAM refresh settings
+	ldr	r4, =MDREFR
+	ldr	r5, [r4]
+
+	@ enable SDRAM self-refresh mode
+	orr	r5, r5, #MDREFR_SLFRSH
+
+	@ Intel PXA255 Specification Update notes problems
+	@ about suspending with PXBus operating above 133MHz
+	@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
+	@
+	@ We keep the change-down close to the actual suspend on SDRAM
+	@ as possible to eliminate messing about with the refresh clock
+	@ as the system will restore with the original speed settings
+	@
+	@ Ben Dooks, 13-Sep-2004
+
+	ldr	r6, =CCCR
+	ldr	r8, [r6]		@ keep original value for resume
+
+	@ ensure x1 for run and turbo mode with memory clock
+	bic	r7, r8, #CCCR_M_MASK | CCCR_N_MASK
+	orr	r7, r7, #(1<<5) | (2<<7)
+
+	@ check that the memory frequency is within limits
+	and	r14, r7, #CCCR_L_MASK
+	teq	r14, #1
+	bicne	r7, r7, #CCCR_L_MASK
+	orrne	r7, r7, #1			@@ 99.53MHz
+
+	@ get ready for the change
+
+	@ note, turbo is not preserved over sleep so there is no
+	@ point in preserving it here. we save it on the stack with the
+	@ other CP registers instead.
+	mov	r0, #0
+	mcr	p14, 0, r0, c6, c0, 0
+	orr	r0, r0, #2			@ initiate change bit
+	b	pxa_cpu_do_suspend
+#endif
+
+	.ltorg
+	.align	5
+pxa_cpu_do_suspend:
+
+	@ All needed values are now in registers.
+	@ These last instructions should be in cache
+
+	@ initiate the frequency change...
+	str	r7, [r6]
+	mcr	p14, 0, r0, c6, c0, 0
+
+	@ restore the original cpu speed value for resume
+	str	r8, [r6]
+
+	@ need 6 13-MHz cycles before changing PWRMODE
+	@ just set frequency to 91-MHz... 6*91/13 = 42
+
+	mov	r0, #42
+10:	subs	r0, r0, #1
+	bne	10b
+
+	@ Do not reorder...
+	@ Intel PXA270 Specification Update notes problems performing
+	@ external accesses after SDRAM is put in self-refresh mode
+	@ (see Errata 39 ...hangs when entering self-refresh mode)
+
+	@ force address lines low by reading at physical address 0
+	ldr	r3, [r2]
+
+	@ put SDRAM into self-refresh
+	str	r5, [r4]
+
+	@ enter sleep mode
+	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
+
+20:	b	20b				@ loop waiting for sleep